Search Results

Search found 19995 results on 800 pages for 'software updater'.

Page 684/800 | < Previous Page | 680 681 682 683 684 685 686 687 688 689 690 691  | Next Page >

  • Why can't I connect to computers on my network using our external IP address?

    - by Kivin
    My home network is serviced by an ADSL line. The modem is in bridged mode. The router performs the PPPoE. Three computers are connected to the router: two wired Windows 7 boxes and a Ubuntu Linux box over wifi. The computers are hosting various forms of services including FTP and HTTP. The router has port forwarding mapped from the relevant ports to the reserved IP addresses for the computers. If I attempt to connect to a server inside the network, such as ftp://67.xx.xxx.xxx from inside the network, the request times out. However if I connect using the internally mapped address, such as ftp://192.168.0.100, all is well. This is a nuisance for setting up software, especially on the laptop which needs to be able to phone home from anywhere, and I just don't have enough expertise with networking to know why this is occurring to even have a clue whether it can be solved or not. edit: It should be noted that the servers can be accessible outside the network - say, at the starbucks across the street - perfectly fine, using the ISP provided address and the appropriate port.

    Read the article

  • Cisco Catalyst 3750 connected to Cisco ASA 5505 and dropping packets

    - by Bo102010
    (Cross posted from Super User per suggestion there) At the office, I have inherited a network that I am still trying to fully comprehend. I have a problem today with a new connection between: A port on a Cisco Catalyst 3750 [WS-C3750G-48TS-S running C3750-IPSERVICESK9-M version 12.2(53)SE1] A port on a Cisco ASA 5505 [ASA Software version 8.3(2)] The 3750 is home to a Vlan that has a few ports assigned to it. interface Vlan3 description Internal network (172.18.160.0/24) ip address 172.18.160.1 255.255.255.0 I have a host (outside of my control) that needs to be in this VLAN (i.e it must have an address 172.18.160.something/24) that also needs to access the Internet. To accomplish this, I ran a link from the Catalyst (Gi1/0/13) to the ASA (Ethernet 0/5). I configured the Catalyst port like so: interface GigabitEthernet1/0/13 description To ASA, 172.18.160.69 switchport access vlan 3 switchport mode access speed 100 duplex full I configured the ASA like so: interface Vlan1 nameif inside security-level 100 ip address 172.18.160.69 255.255.255.0 interface Ethernet0/5 speed 100 duplex full Then I plugged the host into Ethernet 0/4 on the ASA and instructed its owner to make its default gateway 172.18.160.69. I made a NAT rule in the ASA and set up some rules, and it's able to access the Internet without issue. However, I noticed that the Catalyst reports a ton of packets being dropped toward the ASA. Catalyst3750#show interfaces GigabitEthernet 1/0/13 | include counters|drops Last clearing of "show interface" counters 00:28:13 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 136909347 This is a huge number of drops, since there's not much traffic on this VLAN at all. I tried these things: Make sure speed and duplex agree on both sides (100 Mbps / Full) Set no cdp enable on the Catalyst Gi10/13 Set no keepalive on the Catalyst Gi10/13 Checked for excessive CPU usage on both Checked for excessive traffic on both Am I missing something? Any help would be appreciated.

    Read the article

  • Any chance to extract Windows from recovery DVDs

    - by Pekka
    I have an Acer Tablet PC that came with WIndows XP Tablet PC Edition in the form of three recovery DVDs. Sadly, a mainboard fault put the machine out of business. I have now bought a used one from a different manufacturer that comes without an operating system. The recovery DVDs seem to contain three parts of a Norton Ghost image, and nothing else. The recovery DVD won't even start on a Non-Acer system. I'm a bit miffed because I legally own a Windows XP Tablet PC Edition license that I now can't use on the original machine any more. As far as I know, it's not legal in my jurisdiction for them to bind the license to a certain machine. I want to continue using the operating system on the new machine. Is there any chance of extracting usable Windows XP installation files from that image? How are such image files usually made up? Is there any free software around that can read Norton Ghost images so I can take a peek myself?

    Read the article

  • Can't login via ssh after upgrading to Ubuntu 12.10

    - by user42899
    I have an Ubuntu 12.04LTS instance on AWS EC2 and I upgraded it to 12.10 following the instructions at https://help.ubuntu.com/community/QuantalUpgrades. After upgrading I can no longer ssh into my VM. It isn't accepting my ssh key and my password is also rejected. The VM is running, reachable, and SSH is started. The problem seems to be about the authentication part. SSH has been the only way for me to access that VM. What are my options? ubuntu@alice:~$ ssh -v -i .ssh/sos.pem [email protected] OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 debug1: Reading configuration data /home/ubuntu/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: Connecting to www.hostname.com [37.37.37.37] port 22. debug1: Connection established. debug1: identity file .ssh/sos.pem type -1 debug1: identity file .ssh/sos.pem-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9p1 Debian-5ubuntu1 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: RSA 33:33:33:33:33:33:33:33:33:33:33:33:33:33 debug1: Host '[www.hostname.com]:22' is known and matches the RSA host key. debug1: Found key in /home/ubuntu/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: .ssh/sos.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey,password debug1: Next authentication method: password [email protected]'s password: debug1: Authentications that can continue: publickey,password Permission denied, please try again.

    Read the article

  • Spurious alleged file corruption on Windows 7

    - by Johannes Rössel
    Recently my Laptop sometimes warns about corrupted files on the hard drive (Samsung SSD PB22-JS3 TM). This has only happened so far when updating (or checking out) an SVN repository with either TortoiseSVN or the command line Subversion client. The fun thing is that the corrupted file has always been a .svn directory (although the directory entry may contain files in that directory too, if they're small enough?—?which should be the case with SVN). However, when looking into the warned-about directory I notice nothing strange or unusual and don't get any more warnings about it and another try (SVN stops updating once that error occurs?—?TortoiseSVN even with an appropriate error message) of updating the working copy works (well, mostly; sometimes it does it again, albeit with a different directory). Since the laptop is only a few months old I doubt the SSD is failing already—five months of normal usage shouldn't be too surprising. Also it (so far) occurred only with SVN updates on a large repository. Maybe that's too many writes in a short time and some part between the software and the hardware doesn't quite catch up fast enough or so?—?I don't know enough about this to actually make an informed guess here. Anyone knows what's up here? ETA: Note to add: I've run chkdsk (it seems to schedule itself anyway when this happens) and it didn't find anything out of the ordinary.

    Read the article

  • How to connect to a computer that is in Sleep mode over the internet

    - by Gerhard Weiss
    How to connect to a computer that is in Sleep mode over the internet? I am using LogMeIn to connect to another computer offsite. I just installed Windows 7 RC on that system and found that the Sleep mode actually works. Currently LogMeIn does not connect when the system is in Sleep mode or Hibernate mode (that is what their error message displays when you try). Is there a way to get LogMeIn to connect to a system in Sleep mode? Is there other software that gives simliar LogMeIn functionallity (like RDP, etc.) that could be used on Windows 7 instead. I just use LMI for connecting and nothing else (no printing or file transfers). A Non-expensive options (such as free) would be better. I have seen web sites mentioning "Wake on LAN". Does anyone have some good links on how to set this up to be accessed over the internet? Edited: It looks like LogMeIn BETA might be the solution. https://beta.logmein.com/welcome/nextgen/ Has anyone tried this beta yet?

    Read the article

  • Fast Ethernet module for Cisco 2620

    - by Kenny Rasschaert
    I have a Cisco 2620 Router. It comes with one fast ethernet port built in (circled in red), and one old AUI ethernet module is installed (circled in blue). I figure I can put a transceiver on the AUI interface to get a second RJ45 connector. What I'd really like to have is a second fast ethernet connector. The ideal candidate to achieve this would be the NM-1FE-TX module. Cisco claims on their website that this module is not suitable for the Cisco 2620 and Cisco 2620XM. It says so in "Table 2 Physical Limitation of Serial Modules per Chassis". Indeed, this module was designed for the 3600 series of routers. I've seen claims on the internet, however, of people having this module on a 2620XM, and it being fully functional. This claim gains some credibility because of the fact that in Cisco's own Packet Tracer software, you can install this module on the 2620XM router. I'm looking for a definitive answer. Will this module work on a Cisco 2620? Is there perhaps another way to get a second fast ethernet port on this device?

    Read the article

  • Convert mp4 video to a format xbox 360 can play

    - by Björn Lindqvist
    Here is a video file my Xbox 360 refuses to play: $ MP4Box -info video.mp4 * Movie Info * Timescale 90000 - Duration 02:18:33.365 Fragmented File no - 2 track(s) File Brand mp42 - version 0 Created: GMT Sat Jul 21 07:08:55 2012 File has root IOD (9 bytes) Scene PL 0xff - Graphics PL 0xff - OD PL 0xff Visual PL: ISO Reserved Profile (0x7f) Audio PL: High Quality Audio Profile @ Level 2 (0x0f) No streams included in root OD iTunes Info: Encoder Software: HandBrake 0.9.6 2012022800 Track # 1 Info - TrackID 1 - TimeScale 90000 - Duration 02:18:33.235 Media Info: Language "Undetermined" - Type "vide:avc1" - 199318 samples Visual Track layout: x=0 y=0 width=1280 height=688 MPEG-4 Config: Visual Stream - ObjectTypeIndication 0x21 AVC/H264 Video - Visual Size 1280 x 688 AVC Info: 1 SPS - 1 PPS - Profile High @ Level 4.1 NAL Unit length bits: 32 Self-synchronized Track # 2 Info - TrackID 2 - TimeScale 48000 - Duration 02:18:33.365 Media Info: Language "English" - Type "soun:mp4a" - 389689 samples MPEG-4 Config: Audio Stream - ObjectTypeIndication 0x40 MPEG-4 Audio MPEG-4 Audio AAC LC - 6 Channel(s) - SampleRate 48000 Synchronized on stream 1 $ avconv -i video.mp4 avconv version 0.8.4-4:0.8.4-0ubuntu0.12.04.1, Copyright (c) 2000-2012 the Libav developers built on Nov 6 2012 16:51:33 with gcc 4.6.3 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'video.mp4': Metadata: major_brand : mp42 minor_version : 0 compatible_brands: mp42isomavc1 creation_time : 2012-07-21 07:08:55 encoder : HandBrake 0.9.6 2012022800 Duration: 02:18:33.36, start: 0.000000, bitrate: 2299 kb/s Stream #0.0(und): Video: h264 (High), yuv420p, 1280x688, 1973 kb/s, 23.98 fps, 90k tbr, 90k tbn, 180k tbc Metadata: creation_time : 2012-07-21 07:08:55 Stream #0.1(eng): Audio: aac, 48000 Hz, 5.1, s16, 319 kb/s Metadata: creation_time : 2012-07-21 07:08:55 At least one output file must be specified What tool, such as ffmpeg or mencoder, and what magic command line incantation should I use to transcode this file into a format Xbox 360 can play? I want the transcode process to retain as good video quality as possible.

    Read the article

  • corrupted, hidden, wireless network adapter from "Network Connections" in Windows 7

    - by srihari reddy
    The issue is that when I install a wireless network adapter on my Windows 7 Professional machine I have no connectivity, the system tray icon has a red X. First, I tried the obvious, install updated drivers from the manufacturer. When I did this, the Network Connections icon had gray bars and there was no connectivity. So I tried installling the network adapter on a different computer on the same network and I verified that it does work with no issues. Next, I ran scan disk with no issues. Next, I ran sfc as admin with no issues. At this point I turned to the router and turned SSID broadcast on but that didn't help. I turned MAC address filtering off at the router but that didn't help. Whenever I installed the original network adapter (a wireless N usb adapter with WPA2 TKIP+AES) it showed up as "Wireless Network Connection 2" with a grayed out icon and no connectivity. Lastly, I tried installing two different "verified working" usb wireless adapters on to the Windows 7 Pro machine. The results were the same "Wireless Network Connection 2" that had a green bar icon but no connectivity. I installed the manufacturers software and it indicated the NIC was not there even thought the driver installed successfully in Device Manager. I guess I should mention, I first tried (insanely in vain) to use the (worthless) Windows Network troubleshooter. The results were....drumroll please... There is a problem with the network adapter... well No Duh! Also, during all of this the network adapter is always showing as "Working Properly" in the properties dialogue of Device Manager for the wireless NIC. I checked for hidden devices in Device Manager but there were none. Here is my fundamental question that I've tried to find in the Windows 7 support center with no luck. How do I remove/delete/uninstall network adapters from the Windows 7 registry? in particular hidden, corrupted network adapters, that used to be working.

    Read the article

  • Intel Atom overheating in ASUS EEE Box 1501P

    - by Sergey L.
    I have had an ASUS EEE Box 1501P for just a little bit over a year. Of course it breaks 2 months after the warranty runs out. http://www.asus.com/Eee/EeeBox_PC/EeeBox_PC_EB1501P/ I have been using the box as a Home Media Center. Running mostly 24/7 often pausing a video overnight. Since last week the fan started running extremely loud. After some digging I found that the Intel Atom CPU in it is overheating and the built-in sensor is reporting temperatures way over 105°C. This got me worried, so I took the unit apart. Completely vacuumed the heat sink, oiled the fan, but the unit is still showing the same behaviour. After turning it on and just observing the hardware monitor in the BIOS the temperature slowly rises from 40°C to over 95°C in appx 5 min. I am running the newest BIOS and a lightweight Linux OPENELEC OS with XBMC on it. Now I am wondering if it could be a faulty heat sensor in the Atom. Recommended running temperature is up to 85°C, but I have not detected any performance hits when running at the above mentioned 105°C and there seem to be no software faults. How can an Atom with an attached heat sink and a fan running at full capacity even get this hot in the first place at 0 load? Aren't those things designed to generate virtually no heat? Could it be a faulty heat sensor? What shall I try to fix this? I would prefer not to damage the CPU, since it is hard fused into the motherboard and cannot be replaced. I could remove the heat pipe/heat sink, but it is getting hot, so heat is properly transferring from the CPU to the heat pipe, the fan is running at full capacity, is recently oiled and warm air is making it out of the exhaust. Edit: One more note: The North-bridge (or whatever it is called nowadays) is on the same heat pipe.

    Read the article

  • How does the LeftHand SAN perform in a Production environment?

    - by Keith Sirmons
    Howdy, I previously asked this ServerFault question: Does anyone have experience with lefthands VSA SAN The general consensus looks like it does not perform well enough for a production SQL server even at a light load. So the new question is, How does LeftHand's SAN perform on the HP or Dell dedicated Hardware boxes? We are looking at the Starter SAN with 2 HP nodes in a 2-way replication, 2 ESX servers hosting a total of 2 Active Directory server, 1 MS SQL server, 1 File Server, and 1 General Purpose Server for things like Virus Scan (All Microsoft Server 2005 or 2008). The reason I am looking at LeftHand is for the complete software package. I plan to have a DR site and like how the SAN can perform an Async Replication to the offsite location without having to go back to the Vendor for more licenses. I also like the redundancy built into the Network Raid architecture. I have looked at other SANS and found different faults with them. For example, Dell's EqualLogic: Found that although the individual box is very redundant in hardware, the Data once spanned across multiple boxes is not redundant, if a node goes down you have lost the only copy of the data sitting on that hardware (One thing is certain, all hardware fails... When? is the only question.). I have used an XioTech SAN as well.. Well worth the money BTW, but I think it is overkill for the size of the office I am targeting. The cost to get the hardware redundancy in the XioTech makes it a little out of reach for the budget I am working in. Thank you, Keith

    Read the article

  • Mac Security - Which one?

    - by Bob Rivers
    Hi, Recently I had my credit card cloned. A few hours after shopping at an online store (in which I trust and buy since 2006) I received a call from my bank asking if I recognize a $5,000 debt to a store(?!) called Church of Christ... I'm a Mac user (OS X 10.6.3). I always kept my system updated and I have firewall enabled (in my Mac and in my broadband router), but I decided to adopt some kind of protection. I don't want to rise passionate discussions. Real or not, snake oil or not, I need to have back my peace of mind... I read this and this posts. I selected two software that I think that could help me (both have more features other than just an antivirus). Does someone have feedback about Intego's VirusBarrier X6 or Trendmicro's Smart Surfing? Intego solutions seems to be better, but TrendMicro brand/name is stronger in corporate environment, so their solution should be good. Both solutions have 30 day free trial, but I would like to hear something from you. Any other solution that I should look? TIA, Bob

    Read the article

  • Why is wget so much faster than Firefox at some downloads?

    - by Earlz
    Recently, I needed to do an update of Xilinx WebPack, mind you, this is one hefty piece of software. It weighs in at 6gigs, which definitely isn't "quick" on any internet I've ever had available to me. So, when I went to download it(using Firefox of course), I was very... unsettled by the fact that the download was only going at 110kByte/s. My internet connection is capable of about 2200kByte/s download, so what gives!? My workaround in the past for this issue has been to take the link to my Linode linux server and download it there with wget, where the download will zip along at 14MByte/s, and then either copying it to my website directory and downloading it that way through HTTP, or using sftp. Both ways work about as well and will sufficiently max out my connection. However, I recently figured out the missing variable. I tried doing the download locally with wget and was able to max out my connection! TL;DR; Now, my question. Why is wget so much faster than firefox at downloading this file? I hardly ever have such a difference in download speeds except for with this one file.

    Read the article

  • How to make Exchange 2003 non-authoritive

    - by Romski
    Background We are a small company with an internally hosted Exchange 2003. It receives email for 2 domains (the company was renamed a few years back). For the sake of argument, the domains are: oldname.com newname.com We have moved newname.com to a hosted exchange service, and our DNS record is correctly routing emails. Our internal server still receives email for oldname.com, although we have asked our hosting company to accept emails for that domain. Problem My problem is that emails generated internally from monitoring software, printer, etc. are being caught by our (defunct) internal server and being delivered to the old mailboxes. I believe that what is happening is that our internal exchange server considers itself to be the authoritive server for newname.com. I think it must be looking in active directory for a mailbox and delivering it internally without ever going outside. Attempt to fix I started to follow the article here: http://support.microsoft.com/kb/321721. I removed the SMTP recipient policy for newname.com, and added a dummy address and made it primary. I also answered yes for updating the associated emails. I then restarted the Microsoft Exchange Routing System and SMTP, but emails are still being routed internally. Is there a way to force the exchange server to route all emails for the domain newname.com to the new hosted service?

    Read the article

  • error creating MS Exchange distribution list: Active directory response: 00000005: SecErr: DSID-031521D0

    - by BabakBani
    We've migrated a client from google apps to an MS Exchange 2010 SP2 on-premise setup. The setup /prepareAD went well, and the software was installed with the Administrator account. We've used the Exchange Management Console to setup mailboxes and had to google up the appropriate workarounds such as going into each users Advanced Security Settings and selecting "include inheritable permissions from this object's parents", and changing their logon-to from specific machines to "all computers" so that they can connect to Outlook Web Access, and in turn so their Outlook 2007-2010 clients can connect to Exchange. Sending and receiving emails are working well. Now that all this is in place, we can create Dynamic Distrubution Lists with no problem, but as soon as we try and create a DISTRIBUTION LIST, either in the EMC or the Exchange PowerShell, we get an error. As the error message in the powershell is more verbose, I include this if anyone can suggest how we remedy this: [PS] C:\Windows\system32new-DistributionGroup -Name 'projects' -SamAccountName 'projects' -Alias 'projects' Active Directory operation failed on DC.cppe.local. This error is not retriable. Additional information: Access is denied. Active directory response: 00000005: SecErr: DSID-031521D0, problem 4003 (INSUFF_ACCESS_RIGHTS), data 0 + CategoryInfo : NotSpecified: (0:Int32) [New-DistributionGroup], ADOperationException + FullyQualifiedErrorId : 1EA5CD3E,Microsoft.Exchange.Management.RecipientTasks.NewDistributionGroup

    Read the article

  • Managing a test iSCSI target server

    - by dyasny
    Hi all, I am using a RHEL server with a few hard drives, and tgtd as the iscsi target software. I a looking for a way to allocate and deallocate space and targets with that space, without restarting my system, or harming other LUNs. Currently, all my HDDs are PVs in a single VG, and I lvcreate/lvremove as required, and then export the allocated LVs using a tgt script: usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=1 --targetname iqn.2001-04.com.lab.gss:300gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_300Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 1 -I ALL /usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=2 --targetname iqn.2001-04.com.lab.gss:200gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 2 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_200Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 2 -I ALL /usr/sbin/tgtadm --lld iscsi --op new --mode target --tid=3 --targetname iqn.2001-04.com.lab.gss:100gb /usr/sbin/tgtadm --lld iscsi --op new --mode logicalunit --tid 3 --lun 1 -b /dev/mapper/iscsi_vg-iscsi_100Gb /usr/sbin/tgtadm --lld iscsi --op bind --mode target --tid 3 -I ALL tgtadm --mode target --op show So in order to remove a LUN, I stop the tgtd service, lvremove the lv, and remove the entry from the iscsi target script When I add a lun, I run lvcreate, and then add an entry to the script and run it. This is not quite optimal, since restarting the service is a bad idea while other LUNs are busy, so I am looking for a more scalable and safer way. Thanks

    Read the article

  • Nvidia GTS 360M in Asus laptop shuts off when gaming on external display

    - by mr odus
    I have had this problem on my Asus G51j Intel I5, Nvidia GTS360M graphics card. Just updated the drivers to latest off Nvidias site. Most games I play, If I hook it up through an external monitor(this happens whether it's HDMI or VGA). The laptop hard shuts down after about 20 minutes, give or take. This tends to happen on more graphically intense games like Call of dutys, bioshock. I'm running Windows 7, latest nvidia drivers. Games work fine on my laptops screen, and Movies, general computing work fine on the external displays. The laptop always sits on a cooling pad and the latest time was in front of my AC unit, I ran heatfan or whatever the heat tracking software was, and my temperatures were normal through a shut down. This has been happening for the life of the laptop. I dont play very many games, and even fewer on an external monitor, so this issue doesnt come up much Is it possible I have a faulty graphics card? Is there anything else I can try?

    Read the article

  • Apache start failing after apache config modifications, showing syntax error, cannot load php5apache2_2.dll into server

    - by Sandeepan Nath
    I am stuck again with apache setup guys. I am working on a Windows 7 system. I copied the working php5 installation directory from teammates, copied the necessary .dll files from inside php5 installation folder (like they were in the working setup of teammates) to my windows/system32/. Apache server started successfully with the default apache config file. I was able to access localhost in browser. But php code was not parsing. I noticed no such line like the following in the apache config file:- # PHP5 module LoadModule php5_module D:/php5/php5apache2_2.dll If I add this line, apache server start fails. Running test configuration gives the following error - httpd.exe: Syntax error on line 60 of C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load D:/php5/php5apache2_2.dll into server: The specified procedure could not be found. But the dll file is there in the specified location and I have given all permissions to the current system user to the php5 installation directory. The same line also appears in the apache error log, though I am not sure when exactly logs are written to the log file. I am confused if log entries are not made if I have opened the log file for reading? lol ... because I could not observe a pattern in when entries are made. I saw some log entries being made, some not. Oh, why is apache setup such a headache always????

    Read the article

  • Configure Windows firewall to prevent an application from listening on a specific port

    - by U-D13
    The issue: there are many applications struggling to listen on port 80 (Skype, Teamviewer et al.), and to many of them that even is not essential (in the sense that you can have a httpd running and blocking the http port, and the other application won't even squeak about being unable to open the port). What makes things worse, some of the apps are... Well, I suppose, that it's okay that the mentally impaired are being integrated in the society by giving them a job to do, but... Programming requires some intellectual effort, in my humble opinion... What I mean is that there is no way to configure the app not to use specific ports (that's what you get for using proprietary software) - you can either add it to windows firewall exceptions (and succumb to undesired port opening behavior) or not (and risk losing most - if not all - of the functionality). Technically, it is not impossible for the firewall to deny an application opening an incoming port even if the application is in the exception list. And if this functionality is built into the Windows firewall somewhere, there should be a way to activate it. So, what I want to know is: whether there exists such an option, and if it does how to activate it.

    Read the article

  • RemoteApp .rdp embed creds?

    - by Chris_K
    Windows 2008 R2 server running Remote Desktop Services (what we used to call Terminal Services back in the olden days). This server is the entry point into a hosted application -- you could call it Software as a Service I suppose. We have 3rd party clients connecting to use it. Using RemoteApp Manager to build RemoteApp .rdp shortcuts to distribute to client workstations. These workstations are not in the same domain as the RDS server. There is no trust relationship between domains (nor will there be). There is a tightly controlled site to site VPN between workstations and the RDS server, we're quite confident we have access to the server locked down. The remoteApp being run is an ERP application with its own authentication scheme. The issue? I'm trying to avoid the need to create AD logins for every end user when connecting to the RemoteApp server. In fact, since we're doing a remoteApp and they have to authenticate to that app, I'd rather just not prompt them at all for AD creds. I certainly don't want them caught up in managing AD passwords (and periodic expirations) for accounts they only use to get to their ERP login. However, I can't figure out how to embed AD creds in a RemoteApp .rdp file. I don't really want to turn off all authentication on the RDS server at that level. Any good options? My goal is to make this as seamless as possible for the end-users. Clarifying questions are welcome.

    Read the article

  • How to generate thumbnails for less common video containers (mkv, ogm, mp4, flv, rmvb and mov) in wi

    - by fluxtendu
    So how to generate thumbnails for these containers? I know that the install of "DivX Plus Tech Preview: MKV on Windows 7" does it for MKV. But I think that only some registry changes are really necessary and I want it for other containers. If it's possible to avoiding the install of (always bloated) codecs packs it would be nice... Maybe only installing ffdshow or essential and separated codecs. (some time ago I have try reg files for vista without success...) Update: I have installed Win7codecs & tweaked a little its settings and I got almost everything I want. (I have also re-installed the relevant part of the divx plus tech preview to get something else than an all black preview for MKV) Issues that I still want to resolve: Find a cleaner & lighter method Almost all my rmvb and mov files got an all black preview (installing real media/quick time alternative doesn't help, is it the same with the officials?) With almost all containers (avi, mkv, ogm, mpg), I have (few) random files that don't get the preview. I could play them in WMP or another player and don't have found a pattern in the codecs used. All wmv, flv and mp4 have previews but I have less files in these containers. (I clear my thumbnails cache to test them) More generally I would like to understand how windows handle the containers & codecs to generate the previews. And a software that let me choose arbitrarily the pictures previewed would be convenient too

    Read the article

  • Webcam becomes "Unknown Device" after Windows Messenger 2011 is installed

    - by Boris
    I have Sony VAIO VGN-NS290J laptop. I installed Windows 7 Ultimate 64-bit. I was able to find drivers for all hardware without any problems. Recently, I installed Microsoft Windows Live Essentials 2011, i.e. Windows Live Messenger 2011. Ever since that application is running on my computer, my webcam is not recognized by the OS any more. It is listed as the "Unknown Device" and placed in the Universal Serial Bus controllers group in the Device Manager. There don't seem to be any drivers for this webcam. It's a standard Sony Motion Eye web camera and Sony does not offer any drivers for it. There is one application to download that utilizes the camera, but there are no drivers (and the system is showing the same behavior regardless of the presence of the application). It happens from time to time that the webcam becomes recognized by the OS again, after a couple of restarts; but not always. Then it becomes unknown again. I am absolutely positive that this issue is caused by the Windows Live Messenger 2011, because same symptoms caused the same effects before. I wish to be able to continue to use this software, but also to use my webcam. I was wondering if anyone had a similar issue and if there is a way to fix it. Thanks for all the help, I appreciate it. Update: I have discovered a pattern - if the camera goes astray, restarting the machine does not bring it back; but switching the computer off and turning it back on does. Every time! This is getting super complicated :)

    Read the article

  • Server Restart's and Respective Orders

    - by TheD
    EDIT:Not meaning to be disrespectful to any of the answers, but, the main question was whether rebooting a DC at the beginning of a cycle, then all the other servers, or rebooting it at the end once all the others are back online - is there a reason for doing it either way? I'm still not sure based on current responses. This will most likely seem like a fairly, maybe even stupid, question, but it's something I have been wondering about. As part of a regular process for clients servers are restarted remotely after patches and every client tends to have a similar order - but there always seems to be a small debate when it comes down to when do you reboot your DC. For example, 4 servers, 1 DC, 1xExchange, 1xBESX and 1xRandom, lets say it has some CRM software installed, is it best to reboot the DC first, then Exchange, then BESX and so on - or reboot all the servers, then reboot the DC last? - Perhaps it doesn't matter at all and it's just a case of how you have always done it. Would it change in a Hyper-V environment for example, with a physical DC, 1 VHost with all your servers virtualised on that Host? Rebooting the VHost and Virtual Machines first, then the DC at the end, or vice versa? Thanks!

    Read the article

  • DIR $file "File Not Found" vs DIR $filedir shows it....not permissions, not USB

    - by Kev
    I was having this problem before on a USB drive, but now it's happening on my main RAID5-backed hard disk: 2013-10-17 9:37 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel*" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs 2003-09-09 11:29 PM 1,056,768 Manuel d'intervention d'urgence MFC.doc 2004-06-20 10:36 PM 139,849 Manuel d'intervention d'urgence MFC.pdf 2 File(s) 1,196,617 bytes 0 Dir(s) 196,068,691,968 bytes free 2013-10-17 9:38 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel d'intervention d'urgence MFC.doc" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs File Not Found 2013-10-17 9:38 C:\> This is from a Command Prompt window where I went to Properties and told it I wanted to modify who it ran as. I opened it, had it run as me with the "restricted access" unchecked, then ran the above. The file in question has the following ACLs: Administrators, SYSTEM, and OurCompanyUsers. All three have full control of everything. Nobody has any Deny bits set. I am a member of Administrators. So I don't believe it's a permissions issue. It's not a USB drive, so this time there is no question of USB hardware. Windows Server 2003 Standard Edition SP2. What does this mean? Is this more likely a hardware or software problem?

    Read the article

  • Unable to connect to shared (iscsitarget) dvd-rw drive on ubuntu karmic box

    - by develop7
    Preface: I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf): Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw Lun 0 Path=/dev/sr0,Type=blockio #I've skipped commented lines Also, I've opened port 3260 with ufw: $ sudo ufw status | grep 3260 3260 ALLOW 192.168.1.0/24 But (here's the trouble) I still can't connect to this target from Windows box. Microsoft Software iSCSI Initiator tells "Logon failure" upon connect attempt. After unsuccessful connection attempt I've noticed this line in dmesg | tail's output: iscsi_trgt: ioctl(299) invalid ioctl cmd c078690d So the question is — what's wrong with my config/iSCSI target/whatever else? Or, in short — what I'm doing wrong? Thanks in advance.

    Read the article

< Previous Page | 680 681 682 683 684 685 686 687 688 689 690 691  | Next Page >