Search Results

Search found 18913 results on 757 pages for 'ideas'.

Page 685/757 | < Previous Page | 681 682 683 684 685 686 687 688 689 690 691 692  | Next Page >

  • Deliberate Practice

    - by Jeff Foster
    It’s easy to assume, as software engineers, that there is little need to “practice” writing code. After all, we write code all day long! Just by writing a little each day, we’re constantly learning and getting better, right? Unfortunately, that’s just not true. Of course, developers do improve with experience. Each time we encounter a problem we’re more likely to avoid it next time. If we’re in a team that deploys software early and often, we hone and improve the deployment process each time we practice it. However, not all practice makes perfect. To develop true expertise requires a particular type of practice, deliberate practice, the only goal of which is to make us better programmers. Everyday software development has other constraints and goals, not least the pressure to deliver. We rarely get the chance in the course of a “sprint” to experiment with potential solutions that are outside our current comfort zone. However, if we believe that software is a craft then it’s our duty to strive continuously to raise the standard of software development. This requires specific and sustained efforts to get better at something we currently can’t do well (from Harvard Business Review July/August 2007). One interesting way to introduce deliberate practice, in a sustainable way, is the code kata. The term kata derives from martial arts and refers to a set of movements practiced either solo or in pairs. One of the better-known examples is the Bowling Game kata by Bob Martin, the goal of which is simply to write some code to do the scoring for 10-pin bowling. It sounds too easy, right? What could we possibly learn from such a simple example? Trust me, though, that it’s not as simple as five minutes of typing and a solution. Of course, we can reach a solution in a short time, but the important thing about code katas is that we explore each technique fully and in a controlled way. We tackle the same problem multiple times, using different techniques and making different decisions, understanding the ramifications of each one, and exploring edge cases. The short feedback loop optimizes opportunities to learn. Another good example is Conway’s Game of Life. It’s a simple problem to solve, but try solving it in a functional style. If you’re used to mutability, solving the problem without mutating state will push you outside of your comfort zone. Similarly, if you try to solve it with the focus of “tell-don’t-ask“, how will the responsibilities of each object change? As software engineers, we don’t get enough opportunities to explore new ideas. In the middle of a development cycle, we can’t suddenly start experimenting on the team’s code base. Code katas offer an opportunity to explore new techniques in a safe environment. If you’re still skeptical, my challenge to you is simply to try it out. Convince a willing colleague to pair with you and work through a kata or two. It only takes an hour and I’m willing to bet you learn a few new things each time. The next step is to make it a sustainable team practice. Start with an hour every Friday afternoon (after all who wants to commit code to production just before they leave for the weekend?) for month and see how that works out. Finally, consider signing up for the Global Day of Code Retreat. It’s like a daylong code kata, it’s on December 8th and there’s probably an event in your area!

    Read the article

  • Customer owes me half my payment. Should I take ownership of his AWS account for charging? How?

    - by Cawas
    Background They paid me my first half (back in April 15th) before even we could get into an agreement. Very nice of him! Then I've finished the 2 weeks job of setting up the servers, using his AWS credentials he had just bought. I waited for another 2 weeks for everything settling up, and it was all running fine. He did what he needed with his sftp account, everyone were happy. Now, it has been almost 2 months since I've finished the job and I still didn't get the 2nd half. I must assume, it's not much money (about U$400, converted), but it would help me pay the bills at least. Heck, the Amazon bills they are paying are little less than that (for now). Measures I'm wondering how I can go to charge him now. First thought, of course, would be taking everything down and say "pay now, or be doomed". If that's not good enough, then I lost it. I have no contracts and I doubt I could get a law suit in this country for such a low value based only on emails. And I don't really want to get too agressive here - there might be a business chance in the future and I don't want to ruin it. Second though would be just changing the password. But then he probably could gain access again by some recovery means. That's where my question may mainly relay. How can I do it and not leaving any room for recovery from his side? I even got the first AWS "your account was created" mail from himself, showing me I could begin my job, back then. Lastly, do you have any other idea on what I can and what I should do in this case? Responding to Answers Please, consider reading the current answers and comments. This is not a very simple case. I've considered many, many options (including all lawful ones) before considering this ones I've listed here, and I am willing to take the loss and all that. That's not the point. The point is being practical here. I will call him again and talk about it. I will do terrorism on getting lawyers and getting contract. I am ready to go all forth while I have time and energy for it. But, in practice, there is this extra thing I can do to assure myself of the work I've done. I can basically take it back and delete everything! I'd only take his password because I can find no other way to do it within Amazon. Maybe, contacting Amazon and explaining the situation? I don't know. Give me ideas on this technical side! And thank everyone for the attention and helping me clarifying the issue so far! :)

    Read the article

  • Is the Internet Making us Smarter or Not?

    - by BuckWoody
    I’ve been reading recently about an exchange among some very bright folks, some who posit that the Internet with its instant-on, sometimes-right, big-statement-wins mentality is making people think in a more shallow way, teaching us to rely on others as experts and diluting our logical thought process. Others state that it broadens our perspective and extends our mental reach. Whenever I see this kind of exchange on two ends of a spectrum, I begin to wonder if both sides might be correct.   I can certainly say that I have changed my way of learning, reading, and social interactions because of the Internet. And my tolerance for reading long missives has indeed gone down. I tend to (mentally and literally) “bookmark” things I never seem to have time to get back to. But I also agree that I’ve been exposed to thoughts, ideas and people I never would have encountered any other way. So how to deal with this dichotomy?   Well, I’m going to go off and think about it. No, I’m really going to go off for a full week to a cabin I’ve rented in a National Forest in the Midwest. It has no indoor plumbing, phones, Internet connections or anything else – only a bed to sleep in and a place to cook a little. I’m taking one book, some paper, and a guitar with me and that’s it. I plan to spend my days walking, reading a little, playing a little on the guitar, but mostly just thinking. Those of you who know me might find this unusual. I’m an always-on, hyper-caffeinated, overly-busy, connected person. I haven’t taken a vacation in five years, at least for more than two or three days at a time. Even then, I keep us on the move constantly – our vacations aren’t cruises or anything like that. I check e-mail, post and all that. When I’m not on vacation, I live with and leverage lots of technology, and work with those that do the same. This, however, is a really “unplugged” event, and I’m hoping that it will let me unpack the things I’ve been stuffing in my head. I plan to spend a lot of time on a single subject, writing notes, thinking, and writing more notes.   So after I post tomorrow's “quote of the day” I’ll be “going dark” for a week. No twitter, FaceBook, LinkedIn, e-mail, chat, none of my five blogs will get updated, and I’ll have to turn in my two articles for InformIT.com early. I won’t have access to my college class portal, so my students will be without me for a week. I will really be offline. I’ll see you in a week – hopefully a little more educated. See you then.   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Is the Internet Making us Smarter or Not?

    - by BuckWoody
    I’ve been reading recently about an exchange among some very bright folks, some who posit that the Internet with its instant-on, sometimes-right, big-statement-wins mentality is making people think in a more shallow way, teaching us to rely on others as experts and diluting our logical thought process. Others state that it broadens our perspective and extends our mental reach. Whenever I see this kind of exchange on two ends of a spectrum, I begin to wonder if both sides might be correct.   I can certainly say that I have changed my way of learning, reading, and social interactions because of the Internet. And my tolerance for reading long missives has indeed gone down. I tend to (mentally and literally) “bookmark” things I never seem to have time to get back to. But I also agree that I’ve been exposed to thoughts, ideas and people I never would have encountered any other way. So how to deal with this dichotomy?   Well, I’m going to go off and think about it. No, I’m really going to go off for a full week to a cabin I’ve rented in a National Forest in the Midwest. It has no indoor plumbing, phones, Internet connections or anything else – only a bed to sleep in and a place to cook a little. I’m taking one book, some paper, and a guitar with me and that’s it. I plan to spend my days walking, reading a little, playing a little on the guitar, but mostly just thinking. Those of you who know me might find this unusual. I’m an always-on, hyper-caffeinated, overly-busy, connected person. I haven’t taken a vacation in five years, at least for more than two or three days at a time. Even then, I keep us on the move constantly – our vacations aren’t cruises or anything like that. I check e-mail, post and all that. When I’m not on vacation, I live with and leverage lots of technology, and work with those that do the same. This, however, is a really “unplugged” event, and I’m hoping that it will let me unpack the things I’ve been stuffing in my head. I plan to spend a lot of time on a single subject, writing notes, thinking, and writing more notes.   So after I post tomorrow's “quote of the day” I’ll be “going dark” for a week. No twitter, FaceBook, LinkedIn, e-mail, chat, none of my five blogs will get updated, and I’ll have to turn in my two articles for InformIT.com early. I won’t have access to my college class portal, so my students will be without me for a week. I will really be offline. I’ll see you in a week – hopefully a little more educated. See you then.   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Resolving collisions between dynamic game objects

    - by TheBroodian
    I've been building a 2D platformer for some time now, I'm getting to the point where I am adding dynamic objects to the stage for testing. This has prompted me to consider how I would like my character and other objects to behave when they collide. A typical staple in many 2D platformer type games is that the player takes damage upon touching an enemy, and then essentially becomes able to pass through enemies during a period of invulnerability, and at the same time, enemies are able to pass through eachother freely. I personally don't want to take this approach, it feels strange to me that the player should receive arbitrary damage for harmless contact to an enemy, despite whether the enemy is attacking or not, and I would like my enemies' interactions between each other (and my player) to be a little more organic, so to speak. In my head I sort of have this idea where a game object (player, or non player) would be able to push other game objects around by manner of 'pushing' each other out of one anothers' bounding boxes if there is an intersection, and maybe correlate the repelling force to how much their bounding boxes are intersecting. The problem I'm experiencing is I have no idea what the math might look like for something like this? I'll show what work I've done so far, it sort of works, but it's jittery, and generally not quite what I would pass in a functional game: //Clears the anti-duplicate buffer collisionRecord.Clear(); //pick a thing foreach (GameObject entity in entities) { //pick another thing foreach (GameObject subject in entities) { //check to make sure both things aren't the same thing if (!ReferenceEquals(entity, subject)) { //check to see if thing2 is in semi-near proximity to thing1 if (entity.WideProximityArea.Intersects(subject.CollisionRectangle) || entity.WideProximityArea.Contains(subject.CollisionRectangle)) { //check to see if thing2 and thing1 are colliding. if (entity.CollisionRectangle.Intersects(subject.CollisionRectangle) || entity.CollisionRectangle.Contains(subject.CollisionRectangle) || subject.CollisionRectangle.Contains(entity.CollisionRectangle)) { //check if we've already resolved their collision or not. if (!collisionRecord.ContainsKey(entity.GetHashCode())) { //more duplicate resolution checking. if (!collisionRecord.ContainsKey(subject.GetHashCode())) { //if thing1 is traveling right... if (entity.Velocity.X > 0) { //if it isn't too far to the right... if (subject.CollisionRectangle.Contains(new Microsoft.Xna.Framework.Rectangle(entity.CollisionRectangle.Right, entity.CollisionRectangle.Y, 1, entity.CollisionRectangle.Height)) || subject.CollisionRectangle.Intersects(new Microsoft.Xna.Framework.Rectangle(entity.CollisionRectangle.Right, entity.CollisionRectangle.Y, 1, entity.CollisionRectangle.Height))) { //Find how deep thing1 is intersecting thing2's collision box; float offset = entity.CollisionRectangle.Right - subject.CollisionRectangle.Left; //Move both things in opposite directions half the length of the intersection, pushing thing1 to the left, and thing2 to the right. entity.Velocities.Add(new Vector2(-(((offset * 4) * (float)gameTime.ElapsedGameTime.TotalMilliseconds)), 0)); subject.Velocities.Add(new Vector2((((offset * 4) * (float)gameTime.ElapsedGameTime.TotalMilliseconds)), 0)); } } //if thing1 is traveling left... if (entity.Velocity.X < 0) { //if thing1 isn't too far left... if (entity.CollisionRectangle.Contains(new Microsoft.Xna.Framework.Rectangle(subject.CollisionRectangle.Right, subject.CollisionRectangle.Y, 1, subject.CollisionRectangle.Height)) || entity.CollisionRectangle.Intersects(new Microsoft.Xna.Framework.Rectangle(subject.CollisionRectangle.Right, subject.CollisionRectangle.Y, 1, subject.CollisionRectangle.Height))) { //Find how deep thing1 is intersecting thing2's collision box; float offset = subject.CollisionRectangle.Right - entity.CollisionRectangle.Left; //Move both things in opposite directions half the length of the intersection, pushing thing1 to the right, and thing2 to the left. entity.Velocities.Add(new Vector2((((offset * 4) * (float)gameTime.ElapsedGameTime.TotalMilliseconds)), 0)); subject.Velocities.Add(new Vector2(-(((offset * 4) * (float)gameTime.ElapsedGameTime.TotalMilliseconds)), 0)); } } //Make record that thing1 and thing2 have interacted and the collision has been solved, so that if thing2 is picked next in the foreach loop, it isn't checked against thing1 a second time before the next update. collisionRecord.Add(entity.GetHashCode(), subject.GetHashCode()); } } } } } } } } One of the biggest issues with my code aside from the jitteriness is that if one character were to land on top of another character, it very suddenly and abruptly resolves the collision, whereas I would like a more subtle and gradual resolution. Any thoughts or ideas are incredibly welcome and helpful.

    Read the article

  • Do Great Work

    - by user12601034
    Have you ever attended an online conference and actually had a desire to attend all of it?? Yesterday I attended the first day of the Great Work MBA program, sponsored by Box of Crayons and hosted by Michael Bungay Stanier. The topic of the day was “Grounding Yourself,” and the day featured five speakers on five different topics. I have to admit that I started the first session with kind of a “blech” feeling that I didn’t really want to participate, but for some reason I did. So I listened to the first session, and I was hooked. I ended up listening to all of the sessions for the day, and I had some great take-aways from the sessions – my highlights included: The opposite of bravery isn’t fear, it’s settling. In essence, you need to be brave in order to accomplish anything. If you’re settling, you’re not being brave, and your accomplishments will likely be lackluster. Bravery requires confidence and permission. You need to work at being brave by taking small wins, build them up and then take slightly larger risks. Additionally, you need to “claim your own crown.” Nobody in the business world is going to give you permission to be a guru in X – you need to give yourself permission to become a guru in X and then do it. Fall in love with obstacles. Everyone is going to face some form of failure. One way to deal with this is to fall in love with solving the puzzle of obstacles. You don’t have to hit it if you can go around it. Understanding purpose brings out the best in people and the best people. As a leader, drawing in people who are passionate and highly motivated about their work creates velocity for your organization. Being clear about purpose is the first step in doing this. You must own your own story. Everything about you creates a “unique you” that is distinct from everyone else. As you take ownership of this, it becomes part of your strength. It’s not a strength if you’re running away from it. Focus on what’s right. Be aware of your tendency to interpret a situation a certain way and differentiate between helpful and unhelpful interpretations. Three questions for how to think differently: 1) Why? 2) Who says so? 3) What would happen if? These three questions can help you build alternative perspectives and options that can increase resiliency. Even though this first day was focused on “Grounding Yourself,” I see plenty of application in the corporate environment for both individuals and leaders of teams. To apply these highlights to my work environment, I would do the following: Understand the purpose – of my company, of my team and of my role on the team. If I know the purpose, I know what I need to bring to the table to make me, my team and my company successful. Declare your goals…your BEHAGS (big, hairy, audacious goals).Have the confidence to declare what you and/or your team is going to accomplish.Sure, you might have to re-state those goals down the line, but you can learn from that as well. Get creative about achieving your goals.Break down your obstacles by asking yourself what is going to stop you from achieving your goals and then, for each obstacles, ask those three questions:Why?Who says so? What would happen if? Focus on what’s right.I had a manager who asked us to write status reports every week.“Status” consisted of 1) What did I accomplish; 2) What will I accomplish next week; 3) How can my manager help me.The focus on our status report was always “what’s right”(“what’s wrong” was always a conversation at the point in time it was needed). I’m normally a skeptic of online webcasts/conferences, and I normally expect to take away maybe one or two ideas. I’m really glad, however, that I took the time to listen to all of the sessions yesterday, and I hope that my take-aways inspire you to think about how you might do great work also. --

    Read the article

  • How can a developer realize the full value of his work [closed]

    - by Jubbat
    I, honestly, don't want to work as a developer in a company anymore after all I have seen. I want to continue developing software, yes, but not in the way I see it all around me. And I'm in London, a city that congregates lots of great developers from the whole world, so it shouldn't be a problem of location. So, what are my concerns? First of all, best case scenario: you are paying managers salary out of yours. You are consistently underpaid by making up for the average manager negative net return plus his whole salary. Typical scenario. I am a reasonably good developer with common sense who cares for readable code with attention to basic principles. I have found way too often, overconfident and arrogant developers with a severe lack of common sense. Personally, I don't want to follow TDD or Agile practices like all the cool kids nowadays. I would read about them, form my own opinion and take what I feel is useful, but don't follow it sheepishly. I want to work with people who understand that you have to design good interfaces, you absolutely have to document your code, that readability is at the top of your priorities. Also people who don't have a cargo cult mentality too. For instance, the same person who asked me about design patterns in a job interview, later told me that something like a List of Map of Vector of Map of Set (in Java) is very readable. Why would someone ask me about design patterns if they can't even grasp encapsulation? These kind of things are the norm. I've seen many examples. I've seen worse than that too, from very well paid senior devs, by the way. Every second that you spend working with people with such lack of common sense and clear thinking, you are effectively losing money by being terribly inefficient with your time. Yet, with all these inefficiencies, the average developer earns a high salary. So I tried working on my own then, although I don't like the idea. I prefer healthy exchange of opinions and ideas and task division. I then did a bit of online freelancing for a while but I think working in a sweatshop might be more enjoyable. Also, I studied computer engineering and you are in an environment in which your client will presume you don't have any formal education because there is no way to prove it. Again, you are undervalued. You could try building a product, yes. But, of course, luck is a big factor. I wonder if there is a way to work in something you can do well, software development, and be valued for the quality of your work and be paid accordingly, and where you and only you get fairly paid for the value you generate. I know that what I have written seems somehow unlikely but I strongly feel this way. Hopefully someone will understand me and has already figured this out. I don't think I'm alone in this kind of feeling.

    Read the article

  • Seeking advice on tools and technology for my new game [closed]

    - by k.k. slider
    I'm a C# developer who has been programming a game in my spare time using XNA and Visual Studio. The game's logic is mostly done and I've completed a prototype that has most of the functionality of (what I envision to be) the final game. However, having heard about the uncertain future and (possibly) limited audience for XNA games, I'm looking to switch platforms... but I don't know what technology would best suit my needs. Below are some specifics about my game and what exactly I'm looking for, if you're interested: The game is a 2D turn-based tactical RPG (strategy game) for two players. It is a basic sprite and tile based game with animations and sound. 3D capabilities are not necessary. I'd like to allow players to compete with others online, and have a basic ranking/matchmaking system. I will probably need something that can interact with a server and a database (the game is turn-based and has no RNG, so cheating would be easy to detect even if most computation is done client-side and minimal data is sent to the server). Ideally, I would be able to release an early version of the game and have people give feedback as I develop additional features (similar to Minecraft). I'd prefer to have a way to release periodic updates to the game instead of releasing an absolute final product. To reach the widest possible audience, I'd prefer technology that allows me to release on PC, Android, iOS, and (maybe) Mac. This is a game with simple mouse inputs which can fit on a mobile touch screen. The game should be monetizable. If I find success with this game, then I may consider becoming a full-time indie game developer. I have several other game ideas and have learned quite a bit from my first attempt at game development. My first thought was an F2P/microtransaction model, but I'm open to other suggestions. Language isn't a primary concern of mine, since I have a decent amount of experience using several languages to program large projects. I'm willing to spend money (e.g. on a developer's license), but the more expensive it gets, the more hesitant I am to use it. I've looked into the following solutions... there are a LOT of tools out there... if anyone has experience with any of these and would like to recommend/reject any of them, it would be helpful. C#/.NET (XNA/MonoGame/SDL/SlimDX/Xamarin/ExEn/ANX?) HTML5/JS (AppMobi/PhoneGap/Marmalade/FlashCanvas/Cordova/libRocket?) Python (Pyglet/Pygame/Kivy?) Java (JavaFX/libGDX?) Unity/Construct 2/Cocos2D/NME/Corona/other game creation software? I'd like something that can do 2D and isn't limited by being too high-level. Other languages (Lua/LOVE? Moai?) Thanks for answering this rather long and tedious question...

    Read the article

  • Rotation of viewplatform in Java3D

    - by user29163
    I have just started with Java3D programming. I thought I had built up some basic intuition about how the scene graph works, but something that should work, does not work. I made a simple program for rotating a pyramid around the y-axis. This was done just by adding a RotationInterpolator R to the TransformGroup above the pyramid. Then I thought hey, can I now remove the RotationInterpolator from this TransformGroup, then add it to the TransformGroup above my ViewPlatform leaf. This should work if I have understood how things work. Adding the RotationInterpolator to this TransformGroup, should make the children of this TransformGroup rotate, and the ViewingPlatform is a child of the TransformGroup. Any ideas on where my reasoning is flawed? Here is the code for setting up the universe, and the view branchgroup. import java.awt.*; import java.awt.event.*; import javax.media.j3d.*; import javax.vecmath.*; public class UniverseBuilder { // User-specified canvas Canvas3D canvas; // Scene graph elements to which the user may want access VirtualUniverse universe; Locale locale; TransformGroup vpTrans; View view; public UniverseBuilder(Canvas3D c) { this.canvas = c; // Establish a virtual universe that has a single // hi-res Locale universe = new VirtualUniverse(); locale = new Locale(universe); // Create a PhysicalBody and PhysicalEnvironment object PhysicalBody body = new PhysicalBody(); PhysicalEnvironment environment = new PhysicalEnvironment(); // Create a View and attach the Canvas3D and the physical // body and environment to the view. view = new View(); view.addCanvas3D(c); view.setPhysicalBody(body); view.setPhysicalEnvironment(environment); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); // Create a ViewPlatform object, and its associated // TransformGroup object, and attach it to the root of the // subgraph. Attach the view to the view platform. Transform3D t = new Transform3D(); Transform3D s = new Transform3D(); t.set(new Vector3f(0.0f, 0.0f, 10.0f)); t.rotX(-Math.PI/4); s.set(new Vector3f(0.0f, 0.0f, 10.0f)); //forandre verdier her for å endre viewing position t.mul(s); ViewPlatform vp = new ViewPlatform(); vpTrans = new TransformGroup(t); vpTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); // Rotator stuff Transform3D yAxis = new Transform3D(); //yAxis.rotY(Math.PI/2); Alpha rotationAlpha = new Alpha( -1, Alpha.INCREASING_ENABLE, 0, 0,4000, 0, 0, 0, 0, 0); RotationInterpolator rotator = new RotationInterpolator( rotationAlpha, vpTrans, yAxis, 0.0f, (float) Math.PI*2.0f); RotationInterpolator rotator2 = new RotationInterpolator( rotationAlpha, vpTrans); BoundingSphere bounds = new BoundingSphere(new Point3d(0.0,0.0,0.0), 1000.0); rotator.setSchedulingBounds(bounds); vpTrans.addChild(rotator); vpTrans.addChild(vp); vpRoot.addChild(vpTrans); view.attachViewPlatform(vp); // Attach the branch graph to the universe, via the // Locale. The scene graph is now live! locale.addBranchGraph(vpRoot); } public void addBranchGraph(BranchGroup bg) { locale.addBranchGraph(bg); } }

    Read the article

  • Color Picking Troubles - LWJGL/OpenGL

    - by Tom Johnson
    I'm attempting to check which object the user is hovering over. While everything seems to be just how I'd think it should be, I'm not able to get the correct color due to the second time I draw (without picking colors). Here is my rendering code: public void render() { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); camera.applyTranslations(); scene.pick(); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); camera.applyTranslations(); scene.render(); } And here is what gets called on each block/tile on "scene.pick()": public void pick() { glColor3ub((byte) pickingColor.x, (byte) pickingColor.y, (byte) pickingColor.z); draw(); glReadBuffer(GL_FRONT); ByteBuffer buffer = BufferUtils.createByteBuffer(4); glReadPixels(Mouse.getX(), Mouse.getY(), 1, 1, GL_RGBA, GL_UNSIGNED_BYTE, buffer); int r = buffer.get(0) & 0xFF; int g = buffer.get(1) & 0xFF; int b = buffer.get(2) & 0xFF; if(r == pickingColor.x && g == pickingColor.y && b == pickingColor.z) { hovered = true; } else { hovered = false; } } I believe the problem is that in the method of each tile/block called by scene.pick(), it is reading the color from the regular drawing state, after that method is called somehow. I believe this because when I remove the "glReadBuffer(GL_FRONT)" line from the pick method, it seems to almost fix it, but then it will also select blocks behind the one you are hovering as it is not only looking at the front. If you have any ideas of what to do, please be sure to reply!/ EDIT: Adding scene.render(), tile.render(), and tile.draw() scene.render: public void render() { for(int x = 0; x < tiles.length; x++) { for(int z = 0; z < tiles.length; z++) { tiles[x][z].render(); } } } tile.render: public void render() { glColor3f(color.x, color.y, color.z); draw(); if(hovered) { glColor3f(1, 1, 1); glPolygonMode(GL_FRONT_AND_BACK, GL_LINE); draw(); glPolygonMode(GL_FRONT_AND_BACK, GL_FILL); } } tile.draw: public void draw() { float x = position.x, y = position.y, z = position.z; //Top glBegin(GL_QUADS); glVertex3f(x, y + size, z); glVertex3f(x + size, y + size, z); glVertex3f(x + size, y + size, z + size); glVertex3f(x, y + size, z + size); glEnd(); //Left glBegin(GL_QUADS); glVertex3f(x, y, z); glVertex3f(x + size, y, z); glVertex3f(x + size, y + size, z); glVertex3f(x, y + size, z); glEnd(); //Right glBegin(GL_QUADS); glVertex3f(x + size, y, z); glVertex3f(x + size, y + size, z); glVertex3f(x + size, y + size, z + size); glVertex3f(x + size, y, z + size); glEnd(); } (The game is like an isometric game. That's why I only draw 3 faces.)

    Read the article

  • Paper-free Customer Engagement

    - by Michael Snow
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Appropriate repost from our friends at the AIIM blog: Digital Landfill -- John Mancini, supporting our mission of enabling customer engagement through better technology choices.  ---------- My wife didn't even give me a card for #wpfd - and they say husbands are bad at remembering anniversaries Well, today is the third World Paper Free Day.  I just got off the Tweet Jam, and there was a host of ideas for getting rid of -- or at least reducing -- paper. When we first started talking about "paper-free" most of the reasons raised to pursue this direction were "green" reasons.  I'm glad to see that the thinking has moved on to questions about how getting rid of paper and digitizing processes helps improve customer engagement.  And the bottom line.  And process responsiveness.  Not that the "green" reasons have gone away, but it's nice to see a maturation in the BUSINESS reasons to get rid of paper. Our World Paper Free Handbook (do not, do not, do not print it!) looks at how less paper in the workplace delivers significant benefits. Key findings show eliminating paper from processes can improve the responsiveness of customer service by 300 percent. Removing paper from business processes and moving content to PCs and tablets has the added advantage of helping companies adopt mobile-enable processes and eliminate elapsed time, lost forms, poor data and re-keying. To effectively mobile-enable processes and reduce reliance on paper, data should be captured as close to the point of origination as possible, which makes information easily available to whomever needs it, wherever they are, in the shortest time possible. This handbook summarizes the value of automating manual, paper-based processes. It then goes a step beyond to provide actionable steps that will set you on the path to productivity, profitability, and, yes, less paper.  Get your copy today and send the link around to your peers and colleagues.  Here's the link; please share it! http://www.aiim.org/Research-and-Publications/Research/AIIM-White-Papers/WPFD-Revolution-Handbook And don't miss out on the real world discussions about increasing engagement with WebCenter in new webinars being offered over the next couple of weeks:  October 30, 2012:  ResCare Solves Content Lifecycle Challenges with Oracle WebCenter November 1, 2012: WebCenter Content for Applications: Streamline Processes with Oracle WebCenter Content Management for Human Resources Applications Available On-Demand:  Using Oracle WebCenter to Content-Enable Your Business Applications

    Read the article

  • HLSL 5 interpolation issues

    - by metredigm
    I'm having issues with the depth components of my shadowmapping shaders. The shadow map rendering shader is fine, and works very well. The world rendering shader is more problematic. The only value which seems to definitely be off is the pixel's position from the light's perspective, which I pass in parallel to the position. struct Pixel { float4 position : SV_Position; float4 light_pos : TEXCOORD2; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; The reason that I used the semantic 'TEXCOORD2' on the light's pixel position is because I believe that the problem lies with Direct3D's interpolation of values between shaders, and I started trying random semantics and also forcing linear and noperspective interpolations. In the world rendering shader, I observed in the pixel shader that the Z value of light_pos was always extremely close to, but less than the W value. This resulted in a depth result of 0.999 or similar for every pixel. Here is the vertex shader code : struct Vertex { float3 position : POSITION; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; struct Pixel { float4 position : SV_Position; float4 light_pos : TEXCOORD2; float3 normal : NORMAL; float2 texcoord : TEXCOORD; }; cbuffer Camera : register (b0) { matrix world; matrix view; matrix projection; }; cbuffer Light : register (b1) { matrix light_world; matrix light_view; matrix light_projection; }; Pixel RenderVertexShader(Vertex input) { Pixel output; output.position = mul(float4(input.position, 1.0f), world); output.position = mul(output.position, view); output.position = mul(output.position, projection); output.world_pos = mul(float4(input.position, 1.0f), world); output.world_pos = mul(output.world_pos, light_view); output.world_pos = mul(output.world_pos, light_projection); output.texcoord = input.texcoord; output.normal = input.normal; return output; } I suspect interpolation to be the culprit, as I used the camera matrices in place of the light matrices in the vertex shader, and had the same problem. The problem is evident as both of the same vectors were passed to a pixel from the VS, but only one of them showed a change in the PS. I have already thoroughly debugged the matrices' validity, the cbuffers' validity, and the multiplicative validity. I'm very stumped and have been trying to solve this for quite some time. Misc info : The light projection matrix and the camera projection matrix are the same, generated from D3DXMatrixPerspectiveFovLH(), with an FOV of 60.0f * 3.141f / 180.0f, a near clipping plane of 0.1f, and a far clipping plane of 1000.0f. Any ideas on what is happening? (This is a repost from my question on Stack Overflow)

    Read the article

  • Dependency injection: How to sell it

    - by Mel
    Let it be known that I am a big fan of dependency injection (DI) and automated testing. I could talk all day about it. Background Recently, our team just got this big project that is to built from scratch. It is a strategic application with complex business requirements. Of course, I wanted it to be nice and clean, which for me meant: maintainable and testable. So I wanted to use DI. Resistance The problem was in our team, DI is taboo. It has been brought up a few times, but the gods do not approve. But that did not discourage me. My Move This may sound weird but third-party libraries are usually not approved by our architect team (think: "thou shalt not speak of Unity, Ninject, NHibernate, Moq or NUnit, lest I cut your finger"). So instead of using an established DI container, I wrote an extremely simple container. It basically wired up all your dependencies on startup, injects any dependencies (constructor/property) and disposed any disposable objects at the end of the web request. It was extremely lightweight and just did what we needed. And then I asked them to review it. The Response Well, to make it short. I was met with heavy resistance. The main argument was, "We don't need to add this layer of complexity to an already complex project". Also, "It's not like we will be plugging in different implementations of components". And "We want to keep it simple, if possible just stuff everything into one assembly. DI is an uneeded complexity with no benefit". Finally, My Question How would you handle my situation? I am not good in presenting my ideas, and I would like to know how people would present their argument. Of course, I am assuming that like me, you prefer to use DI. If you don't agree, please do say why so I can see the other side of the coin. It would be really interesting to see the point of view of someone who disagrees. Update Thank you for everyone's answers. It really puts things into perspective. It's nice enough to have another set of eyes to give you feedback, fifteen is really awesome! This are really great answers and helped me see the issue from different sides, but I can only choose one answer, so I will just pick the top voted one. Thanks everyone for taking the time to answer. I have decided that it is probably not the best time to implement DI, and we are not ready for it. Instead, I will concentrate my efforts on making the design testable and attempt to present automated unit testing. I am aware that writing tests is additional overhead and if ever it is decided that the additional overhead is not worth it, personally I would still see it as a win situation since the design is still testable. And if ever testing or DI is a choice in future, the design can easily handle it.

    Read the article

  • broken upgrade from 10.04 to 12.04 on a VPS - recoverable?

    - by HorusKol
    I have a VPS hosted 1500 km away. It originally came with 9.10 - and this morning I decided that I really should get to an LTS release, and figured I'd jump to 12.04. Researching, I discovered that there is no direct path between 9.10 and 12.04, but that I could upgrade via 10.04. After backing up my data, I dove in. The upgrade to 10.04 was successful, and I proceeded to upgrade to 12.04. Things started to go wrong. First, I got an error with GLIBC - I retried and got the same error. That's when I stopped the upgrade. I then tried another round of apt-get update && apt-get upgrade and got a list of "unmet dependencies": apt: Depends: ubuntu-keyring but it is not going to be installed Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed PreDepends: dpkg (>= 1.15.7.2) but 1.15.5.6ubuntu4.6 is to be installed apt-utils: Depends: libapt-pkg-libc6.10-6-4.8 libapt-inst1.4: Depends: libc6 (>= 2.14) but 2.11.1-0ubuntu7.11 is to be installed libapt-pkg4.12: Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed libc6: Depends: libc-bin (= 2.11.1-0ubuntu7.11) but 2.15-0ubuntu10.2 is to be installed libept0: Depends: libapt-pkg-libc6.10-6-4.8 libnih-dbus1: Depends: libnih1 (= 1.0.3-4ubuntu9) but 1.0.1-1 is to be installed I tried to see if I could do something about these - using apt-get -f install. This told me that I would need to upgrade my kernel. I found instructions on how to do this, but when I ran apt-get to install the new linux headers, I got the same dependency errors. I found another answer here where someone else had had an interruption in their upgrade - and tried the solution that worked for them: sudo apt-get -f dist-upgrade This resulted in the error: E: Could not perform immediate configuration on 'python2.7-minimal'.Please see man 5 apt.conf under APT::Immediate-Configure for details. (2) I tried to resolve this by: apt-get install -o APT::Immediate-Configure=false -f apt python-minimal But this simply ended up with this last list of dependency errors: apt: Depends: ubuntu-keyring but it is not going to be installed Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed PreDepends: dpkg (>= 1.15.7.2) but 1.15.5.6ubuntu4.6 is to be installed apt-utils: Depends: libapt-pkg-libc6.10-6-4.8 libapt-inst1.4: Depends: libc6 (>= 2.14) but 2.11.1-0ubuntu7.11 is to be installed libapt-pkg4.12: Depends: libc6 (>= 2.15) but 2.11.1-0ubuntu7.11 is to be installed Depends: libstdc++6 (>= 4.6) but 4.4.3-4ubuntu5.1 is to be installed libc6: Depends: libc-bin (= 2.11.1-0ubuntu7.11) but 2.15-0ubuntu10.2 is to be installed libept0: Depends: libapt-pkg-libc6.10-6-4.8 libnih-dbus1: Depends: libnih1 (= 1.0.3-4ubuntu9) but 1.0.1-1 is to be installed python: Depends: python-minimal (= 2.6.5-0ubuntu1) but 2.7.3-0ubuntu2 is to be installed python-apt: Depends: libapt-pkg-libc6.10-6-4.8 python-minimal: Depends: python2.7-minimal (>= 2.7.3) but it is not going to be installed Breaks: python-support (< 1.0.10ubuntu2) but 1.0.4ubuntu1 is to be installed synaptic: Depends: libapt-pkg-libc6.10-6-4.8 Any ideas on how to dig out of this hole?

    Read the article

  • BEHIND THE SCENES AT A FLASH-MOB...

    - by OliviaOC
    Today, we interviewed Aarti, who recently organised a flash-mob for Oracle Campus, which you can see on our facebook page Hi Aarti, perhaps you could give us a quick introduction of yourself, and what you do at Oracle? I’ve been with Campus Recruitment for just over a year. I’ve been with Oracle for three years. I was keen to get into the campus role after having watched other colleagues working in campus and when the opportunity arrived I jumped at it. The journey has been fantastic thus far. I’m responsible for the GBU hiring at Oracle. Why did you record the flash-mob video - what were your goals? Flash-mobs were one thing that took off really big in India after the first one in Mumbai. It’s the hot thing in the student community at the moment. A better way to reach out and connect with students. I think that it is also a good way to demonstrate our openness and culture at Oracle – demonstrate that we are very flexible and that we have a cool culture. I knew the video could be shared on our social media pages and reach out to a wider student community What was the preparation and rehearsal for the video like? When I decided to do the video, I had to decide who I would like to do the flash-mob. The new campus hires to Oracle would be ideal for this. We were 2 teams at 2 different locations and Each team took 2-3 songs and choreographed it themselves. Every day at 5pm, each team would meet up and every other weekend the whole group met. Practicing went on for about a month like this. How was the video received by participants and by students on the University campus? The event was well received. We did it during the lunch break at the University so that there was a large presence of students around while the flash mob took place. We set up about an hour beforehand to get everything ready. The break-bell sounded and the students came out, that’s when the flash-mob started. The students were pleasantly surprised that a company was doing this. They also recognised some of the participants involved as former graduates. Since the flash-mob and the video of it that you recorded, have you had much response due to it? We have, especially in the past two weeks. We went back to the college to make some hires. The flash-mob was still fresh in their minds and they knew well who Oracle was as a result. Would you like to repeat this kind of creative initiative again with the recruitment team? Yes, absolutely! I’m over the moon with the flash-mob. My mind is working overtime now with ideas about the next things to do!

    Read the article

  • Trouble rotating viewplatform in Java3D [closed]

    - by user29163
    I have just started with Java3D programming. I thought I had built up some basic intuition about how the scene graph works, but something that should work, does not work. I made a simple program for rotating a pyramid around the y-axis. This was done just by adding a RotationInterpolator R to the TransformGroup above the pyramid. Then I thought hey, can I now remove the RotationInterpolator from this TransformGroup, then add it to the TransformGroup above my ViewPlatform leaf. This should work if I have understood how things work. Adding the RotationInterpolator to this TransformGroup, should make the children of this TransformGroup rotate, and the ViewingPlatform is a child of the TransformGroup. Any ideas on where my reasoning is flawed? Here is the code for setting up the universe, and the view branchgroup. import java.awt.*; import java.awt.event.*; import javax.media.j3d.*; import javax.vecmath.*; public class UniverseBuilder { // User-specified canvas Canvas3D canvas; // Scene graph elements to which the user may want access VirtualUniverse universe; Locale locale; TransformGroup vpTrans; View view; public UniverseBuilder(Canvas3D c) { this.canvas = c; // Establish a virtual universe that has a single // hi-res Locale universe = new VirtualUniverse(); locale = new Locale(universe); // Create a PhysicalBody and PhysicalEnvironment object PhysicalBody body = new PhysicalBody(); PhysicalEnvironment environment = new PhysicalEnvironment(); // Create a View and attach the Canvas3D and the physical // body and environment to the view. view = new View(); view.addCanvas3D(c); view.setPhysicalBody(body); view.setPhysicalEnvironment(environment); // Create a BranchGroup node for the view platform BranchGroup vpRoot = new BranchGroup(); // Create a ViewPlatform object, and its associated // TransformGroup object, and attach it to the root of the // subgraph. Attach the view to the view platform. Transform3D t = new Transform3D(); Transform3D s = new Transform3D(); t.set(new Vector3f(0.0f, 0.0f, 10.0f)); t.rotX(-Math.PI/4); s.set(new Vector3f(0.0f, 0.0f, 10.0f)); //forandre verdier her for å endre viewing position t.mul(s); ViewPlatform vp = new ViewPlatform(); vpTrans = new TransformGroup(t); vpTrans.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE); // Rotator stuff Transform3D yAxis = new Transform3D(); //yAxis.rotY(Math.PI/2); Alpha rotationAlpha = new Alpha( -1, Alpha.INCREASING_ENABLE, 0, 0,4000, 0, 0, 0, 0, 0); RotationInterpolator rotator = new RotationInterpolator( rotationAlpha, vpTrans, yAxis, 0.0f, (float) Math.PI*2.0f); RotationInterpolator rotator2 = new RotationInterpolator( rotationAlpha, vpTrans); BoundingSphere bounds = new BoundingSphere(new Point3d(0.0,0.0,0.0), 1000.0); rotator.setSchedulingBounds(bounds); vpTrans.addChild(rotator); vpTrans.addChild(vp); vpRoot.addChild(vpTrans); view.attachViewPlatform(vp); // Attach the branch graph to the universe, via the // Locale. The scene graph is now live! locale.addBranchGraph(vpRoot); } public void addBranchGraph(BranchGroup bg) { locale.addBranchGraph(bg); } }

    Read the article

  • The long road to bug-free software

    - by Tony Davis
    The past decade has seen a burgeoning interest in functional programming languages such as Haskell or, in the Microsoft world, F#. Though still on the periphery of mainstream programming, functional programming concepts are gradually seeping into the imperative C# language (for example, Lambda expressions have their root in functional programming). One of the more interesting concepts from functional programming languages is the use of formal methods, the lofty ideal behind which is bug-free software. The idea is that we write a specification that describes exactly how our function (say) should behave. We then prove that our function conforms to it, and in doing so have proved beyond any doubt that it is free from bugs. All programmers already use one form of specification, specifically their programming language's type system. If a value has a specific type then, in a type-safe language, the compiler guarantees that value cannot be an instance of a different type. Many extensions to existing type systems, such as generics in Java and .NET, extend the range of programs that can be type-checked. Unfortunately, type systems can only prevent some bugs. To take a classic problem of retrieving an index value from an array, since the type system doesn't specify the length of the array, the compiler has no way of knowing that a request for the "value of index 4" from an array of only two elements is "unsafe". We restore safety via exception handling, but the ideal type system will prevent us from doing anything that is unsafe in the first place and this is where we start to borrow ideas from a language such as Haskell, with its concept of "dependent types". If the type of an array includes its length, we can ensure that any index accesses into the array are valid. The problem is that we now need to carry around the length of arrays and the values of indices throughout our code so that it can be type-checked. In general, writing the specification to prove a positive property, even for a problem very amenable to specification, such as a simple sorting algorithm, turns out to be very hard and the specification will be different for every program. Extend this to writing a specification for, say, Microsoft Word and we can see that the specification would end up being no simpler, and therefore no less buggy, than the implementation. Fortunately, it is easier to write a specification that proves that a program doesn't have certain, specific and undesirable properties, such as infinite loops or accesses to the wrong bit of memory. If we can write the specifications to prove that a program is immune to such problems, we could reuse them in many places. The problem is the lack of specification "provers" that can do this without a lot of manual intervention (i.e. hints from the programmer). All this might feel a very long way off, but computing power and our understanding of the theory of "provers" advances quickly, and Microsoft is doing some of it already. Via their Terminator research project they have started to prove that their device drivers will always terminate, and in so doing have suddenly eliminated a vast range of possible bugs. This is a huge step forward from saying, "we've tested it lots and it seems fine". What do you think? What might be good targets for specification and verification? SQL could be one: the cost of a bug in SQL Server is quite high given how many important systems rely on it, so there's a good incentive to eliminate bugs, even at high initial cost. [Many thanks to Mike Williamson for guidance and useful conversations during the writing of this piece] Cheers, Tony.

    Read the article

  • Making it GREAT! Oracle Partners Building Apps Workshop with UX and ADF in UK

    - by ultan o'broin
    Yes, making is what it's all about. This time, Oracle Partners in the UK were making great looking usable apps with the Oracle Applications Development Framework (ADF) and user experience (UX) toolkit. And what an energy-packed and productive event at the Oracle UK, Thames Valley Park, location it was. Partners learned the fundamentals of enterprise applications UX, why it's important, all about visual design, how to wireframe designs, and then how to build their already-proven designs in ADF. There was a whole day on mobile apps, learning about mobile design principles, free mobile UX and ADF resources from Oracle, and then trying it out. The workshop wrapped up with the latest Release 7 simplified UIs, Mobilytics, and other innovations from Oracle, and a live demo of a very neat ADF Mobile Android app built by an Oracle contractor. And, what a fun two days both Grant Ronald of ADF and myself had in running the workshop with such a great audience, too! I particularly enjoyed the wireframing and visual design sessions interaction; and seeing some outstanding work done by partners. Of note from the UK workshop were innovative design features not seen before and made me all the happier that developers were bringing their own ideas from the consumer IT world of mobility, simplicity, and social to the world of work apps in a smart way within an enterprise methodology too.  Partner wireframe exercise. Applying mobile design principles and UX design patterns means you've already productively making great usable apps! Next, over to Oracle ADF Mobile with it! One simple example from the design of a mobile field service app was that participants immediately saw how the UX and device functionality of the super UK-based app Hailo app could influence their designs (the London cabbie influence maybe?), as well as how we all use maps, cameras, barcode scanners and microphones on our phones could be used in work. And, of course, ADF Mobile has the device integration solutions there too! I wonder will U.S. workshops in Silicon Valley see an Uber UX influence (LOL)! That we also had partners experienced with Oracle Forms who could now offer a roadmap from Forms to Simplified UI and Mobile using ADF, and do it through through the cloud, really made this particular workshop go "ZING!" for me. Many thanks to the Oracle PartnerNetwork (OPN) team for organizing this event with us, and to the representatives of the Oracle Partners that showed and participated so well. That's what I love out this outreach. It's a two-way, solid value-add for all. Interested? Why would partners and developers with ADF skills sign up for this workshop? Here's why: Learn to use the Oracle Applications User Experience design patterns as the usability building blocks for applications development in Oracle Application Development Framework. The workshop enables attendees to build modern and visually compelling desktop and mobile applications that look and behave like Oracle Cloud Applications, and that can co-exist with partner integrations, new, or existing applications deployments. Partners learn to offer customers and clients more than just coded functionality; instead they can provide a complete user experience with a roadmap for continued ROI from applications that also creating more business and attracts the kudos and respect from other makers of apps as they're wowed by the results. So, if you're a partner and interested in attending one of these workshops and benefitting from such learning, as well as having a platform to show off some of your own work, stay well tuned to your OPN channels, to this blog, to the VoX blog, and to the @usableapps Twitter account too. Can't wait? For developers and partners, some key mobile resources to explore now Oracle ADF Mobile UX Patterns and Components Wiki Oracle ADF Academy (Mobile) Oracle ADF Insider Essentials Oracle Applications Mobile User Experience Design Patterns and Guidance

    Read the article

  • Procedual level generation for a platformer game (tilebased) using player physics

    - by Notbad
    I have been searching for information about how to build a 2d world generator (tilebased) for a platformer game I am developing. The levels should look like dungeons with a ceiling and a floor and they will have a high probability of being just made of horizontal rooms but sometimes they can have exits to a top/down room. Here is an example of what I would like to achieve. I'm refering only to the caves part. I know level design won't be that great when generated but I think it is possible to have something good enough for people to enjoy the procedural maps (Note: Supermetrod Spoiler!): http://www.snesmaps.com/maps/SuperMetroid/SuperMetroidMapNorfair.html Well, after spending some time thinking about this I have some ideas to create the maps that I would like to share with you: 1) I have read about celular automatas and I would like to use them to carve the rooms but instead of carving just a tile at once I would like to carve full columns of tiles. Of course this carving system will have some restrictions like how many tiles must be left for the roof and the ceiling, etc... This way I could get much cleaner rooms than using the ussual automata. 2) I want some branching into the rooms. It will have little probability to happen but I definitely want it. Thinking about carving I came to the conclusion that I could be using some sort of path creation algorithm that the carving system would follow to create a path in the rooms. This could be more noticiable if we make the carving system to carve columns with the height of a corridor or with the height of a wide room (this will be added to the system as a param). This way at some point I could spawn a new automa beside the main one to create braches. This new automata should play side by side with the first one to create dead ends, islands (both paths created by the automatas meet at some point or lead to the same room. It would be too long to explain here all the tests I have done, etc... just will try to summarize the problems to see if anyone could bring some light to solve them (I don't mind sharing my successes but I think they aren't too relevant): 1) Zone reachability: How can I make sure that the player will be able to reach all zones I created (mainly when branches happen or vertical rooms are created). When branches are created I have to make sure that there will be a way to get onto the new created branch. I mean a bifurcation that the player could follow. Player will follow the main path or jump to a platform to get onto the other way). On the other hand if an island is created by the meeting of both branches I need to make sure the player will be able to get onto the island too. 2) When a branch is created and corridors are generated for each branch how can I make then both merge or repel to create an island or just make them separated corridors. 3) When I create a branch and an island is created becasue both corridors merge at somepoint or they lead to the same room, is there any way to detect this and randomize where to create the needed platforms to get onto the created isle? This platforms could be created at the start of the island or at the end. I guess part of the problem could be solved using some sort of graph following the created paths but I'm a bit lost in this sea of precedural content creation :). On the other hand I don't expect a solution to the problem but some information to get me moving forward again. Thanks in advance.

    Read the article

  • Framework for Everything - Where to begin? [Longer post]

    - by SquaredSoft
    Back story of this question, feel free to skip down for the specific question Hello, I've been very interested in the idea of abstract programming the last few years. I've made about 30 attempts at creating a piece of software that is capable of almost anything you throw at it. I've undertook some attempts at this that have taken upwards of a year, while getting close, never releasing it beyond my compiler. This has been something I've always tried wrapping my head around, and something is always missing. With the title, I'm sure you're assuming, "Yes of course you noob! You can't account for everything!" To which I have to reply, "Why not?" To give you some background into what I'm talking about, this all started with doing maybe a shade of gray hat SEO software. I found myself constantly having to create similar, but slightly different sets of code. I've gone through as many iterations of way to communicate on http as the universe has particles. "How many times am I going to have to write this multi-threaded class?" is something I found myself asking a lot. Sure, I could create a class library, and just work with that, but I always felt I could optimize what I had, which often was a large undertaking and typically involved frequent use of the CRTL+A keyboard shortcut, mixed with the delete button. It dawned on me that it was time to invest in a plugin system. This would allow me to simply add snippets of code. as time went on, and I could subversion stuff out, and distribute small chunks of code, rather than something that encompasses only a specific function or design. This comes with its own complexity, of course, and by the time I had finished the software scope for this addition, it hit me that I would want to add to everything in the software, not just a new http method, or automation code for a specific website. Great, we're getting more abstract. However, the software that I have in my mind comes down to a quite a few questions regarding its execution. I have to have some parameters to what I am going to do. After writing what the perfect software would do in my mind, I came up with this as a list of requirements: Should be able to use networking A "Macro" or "Expression system" which would allow people to do something like : =First(=ParseToList(=GetUrl("http://www.google.com?q=helloworld!"), Template.Google)) Multithreaded Able to add UI elements through some type of XML -- People can make their own addons etc. Can use third party API through the plugins, such as Microsoft CRM, Exchange, etc. This would allow the software to essentially be used for everything. Really, any task you wish to automate, in a simple way. Making the UI was as also extremely hard. How do you do all of this? Its very difficult. So my question: With so many attempts at this, I'm out of ideas how to successfully complete this. I have a very specific idea in my mind, but I keep failing to execute it. I'm a self taught programmer. I've been doing it for years, and work professionally in it, but I've never encountered something that would be as complex and in-depth as a system which essentially does everything. Where would you start? What are the best practices for design? How can I avoid constantly having to go back and optimize my software. What can I do to generalize this and draw everything out to completion. These are things I struggle with. P.s., I'm using c# as my main language. I feel like in this example, I might be hitting the outer limit of the language, although, I don't know if that is the case, or if I'm just a bad programmer. Thanks for your time.

    Read the article

  • How to layout class definition when inheriting from multiple interfaces

    - by gabr
    Given two interface definitions ... IOmniWorkItem = interface ['{3CE2762F-B7A3-4490-BF22-2109C042EAD1}'] function GetData: TOmniValue; function GetResult: TOmniValue; function GetUniqueID: int64; procedure SetResult(const value: TOmniValue); // procedure Cancel; function DetachException: Exception; function FatalException: Exception; function IsCanceled: boolean; function IsExceptional: boolean; property Data: TOmniValue read GetData; property Result: TOmniValue read GetResult write SetResult; property UniqueID: int64 read GetUniqueID; end; IOmniWorkItemEx = interface ['{3B48D012-CF1C-4B47-A4A0-3072A9067A3E}'] function GetOnWorkItemDone: TOmniWorkItemDoneDelegate; function GetOnWorkItemDone_Asy: TOmniWorkItemDoneDelegate; procedure SetOnWorkItemDone(const Value: TOmniWorkItemDoneDelegate); procedure SetOnWorkItemDone_Asy(const Value: TOmniWorkItemDoneDelegate); // property OnWorkItemDone: TOmniWorkItemDoneDelegate read GetOnWorkItemDone write SetOnWorkItemDone; property OnWorkItemDone_Asy: TOmniWorkItemDoneDelegate read GetOnWorkItemDone_Asy write SetOnWorkItemDone_Asy; end; ... what are your ideas of laying out class declaration that inherits from both of them? My current idea (but I don't know if I'm happy with it): TOmniWorkItem = class(TInterfacedObject, IOmniWorkItem, IOmniWorkItemEx) strict private FData : TOmniValue; FOnWorkItemDone : TOmniWorkItemDoneDelegate; FOnWorkItemDone_Asy: TOmniWorkItemDoneDelegate; FResult : TOmniValue; FUniqueID : int64; strict protected procedure FreeException; protected //IOmniWorkItem function GetData: TOmniValue; function GetResult: TOmniValue; function GetUniqueID: int64; procedure SetResult(const value: TOmniValue); protected //IOmniWorkItemEx function GetOnWorkItemDone: TOmniWorkItemDoneDelegate; function GetOnWorkItemDone_Asy: TOmniWorkItemDoneDelegate; procedure SetOnWorkItemDone(const Value: TOmniWorkItemDoneDelegate); procedure SetOnWorkItemDone_Asy(const Value: TOmniWorkItemDoneDelegate); public constructor Create(const data: TOmniValue; uniqueID: int64); destructor Destroy; override; public //IOmniWorkItem procedure Cancel; function DetachException: Exception; function FatalException: Exception; function IsCanceled: boolean; function IsExceptional: boolean; property Data: TOmniValue read GetData; property Result: TOmniValue read GetResult write SetResult; property UniqueID: int64 read GetUniqueID; public //IOmniWorkItemEx property OnWorkItemDone: TOmniWorkItemDoneDelegate read GetOnWorkItemDone write SetOnWorkItemDone; property OnWorkItemDone_Asy: TOmniWorkItemDoneDelegate read GetOnWorkItemDone_Asy write SetOnWorkItemDone_Asy; end; As noted in answers, composition is a good approach for this example but I'm not sure it applies in all cases. Sometimes I'm using multiple inheritance just to split read and write access to some property into public (typically read-only) and private (typically write-only) part. Does composition still apply here? I'm not really sure as I would have to move the property in question out from the main class and I'm not sure that's the correct way to do it. Example: // public part of the interface interface IOmniWorkItemConfig = interface function OnExecute(const aTask: TOmniBackgroundWorkerDelegate): IOmniWorkItemConfig; function OnRequestDone(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; function OnRequestDone_Asy(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; end; // private part of the interface IOmniWorkItemConfigEx = interface ['{42CEC5CB-404F-4868-AE81-6A13AD7E3C6B}'] function GetOnExecute: TOmniBackgroundWorkerDelegate; function GetOnRequestDone: TOmniWorkItemDoneDelegate; function GetOnRequestDone_Asy: TOmniWorkItemDoneDelegate; end; // implementing class TOmniWorkItemConfig = class(TInterfacedObject, IOmniWorkItemConfig, IOmniWorkItemConfigEx) strict private FOnExecute : TOmniBackgroundWorkerDelegate; FOnRequestDone : TOmniWorkItemDoneDelegate; FOnRequestDone_Asy: TOmniWorkItemDoneDelegate; public constructor Create(defaults: IOmniWorkItemConfig = nil); public //IOmniWorkItemConfig function OnExecute(const aTask: TOmniBackgroundWorkerDelegate): IOmniWorkItemConfig; function OnRequestDone(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; function OnRequestDone_Asy(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; public //IOmniWorkItemConfigEx function GetOnExecute: TOmniBackgroundWorkerDelegate; function GetOnRequestDone: TOmniWorkItemDoneDelegate; function GetOnRequestDone_Asy: TOmniWorkItemDoneDelegate; end;

    Read the article

  • Free hosting solution for a very low-traffic website [duplicate]

    - by user966939
    This question already has an answer here: How to find web hosting that meets my requirements? 4 answers I run a very low-traffic website (about 40 users, basically all of which are daily active on the site). I don't see it changing anytime soon either, as there is no way to sign up on the site right now. Until now I have just been using a sub-directory on a friend's host (shared), to host the web site. But in only a few weeks from now, his subscription will end, and he has no plans on renewing it. So of course this means I'll have to move on to something else. But I don't think I'll find someone who'd be willing to share a... shared host with me again. And besides, the software used on that server is ancient (PHP 4.4.9 + MySQL 4.1.22). There's one obvious solution that comes to mind, I guess: choose a better host and pay for it myself. The problem here is that I have no real fixed income, as I'm only a student. So even if the pricing is dirt cheap, I just can't be certain I will be able to afford it, every single month, for... at least 2 years maybe? So I've looked at free hosting solutions instead. The least requirement I had was that it was completely free of ads. But no matter where I look, I always find something in a corner or two ("what can you expect from a free host?" - yeah I know, but I guess it was worth a shot). For example, on Byethost (one of the free hosts I tried), if you trigger a PHP error while error reporting is set to E_ALL, you will spawn some hidden ad... Besides Byethost, I've tried 000Webhost, x10Hosting, 2Freehosting/1Freehosting, Wink.ws, and they are only worse. Okay, I'm running low on ideas. But! What if I just hosted the site myself, on my own computer? That could work. I actually do have my computer on practically 24/7. But not really. Sometimes I need to reboot it, and sometimes we even have power outages. And what if the hardware needs an upgrade? It's not such a big deal for me if the site went down, because I know what's going on; but what about the users? If I do decide to host it myself, is there some way to show users an alternate page instead of them just seeing a generic "server not found" page in the browser when the site is not accessible? Or is there something I have been missing out on? Is there a different kind of "web hosting" solution out there that I haven't heard of? Here is what I'm really looking for: Free (as in, no costs) NO ads Bandwidth enough for a low-traffic forum with roughly 40 users (Semi-)Up-to-date PHP and MySQL (at least not older than a year) No standard (non-extension) PHP functions turned off - such as sleep() The mbstring extension is enabled Disk space: at least 5 MB At least one MySQL database Some bonus points would be: Max execution time of PHP scripts can be set Remote access to MySQL database What would be the best solution for me? Is there one?

    Read the article

  • Options for different domain and hosting

    - by Carl
    The situation I have a hosting service (one.com) on which I have installed a wordpress.org site in a subdirectory 'wordpress': myhost.com/wordpress/ (myhost.com is actually my own domain, but it already has contents and I don't want wordpress/ to appear in the root of that domain.) I want to use a second domain for this site. Thinking I would be able to forward to the wordpress site without problems, I registered the domain at GoDaddy.com: mydomain.com What I want So when my visitors type in mydomaind.com, I want them to see the contents on myhost.com/wordpress/, and the same for all subpages (mydomain.com/a/subpage fetches from myhost.com/wordpress/a/subpage). Just a redirect isn't enough, I want my visitors to see only mydomain.com as their domain. Some notes If I set up forward with URL masking at GoDaddy, they just give a full frame, pointing to myhost.com/wordpress/. This isn't good enough for me, since mydomain.com will always show up in the adress bar, also for subpages (I want mydomain/a/subpage to show in the adress bar for a subpage). I believe this could in principle be done with a .htaccess file with URL rewriting, but I have no hosting with GoDaddy so I can't upload such a file there. Hosting with GoDaddy is very expensive (of course) so I don't want to do that. I don't think I can use DNS settings; the host of mydomain.com says they don't allow anyone else to point to their name servers. If possible, I wouldn't want to re-install the wordpress site, it would take quite some time. I'd prefer to keep it at myhost.com/wordpress/ (if possible) Anything involving transferring the domain is supposed to take 5-7 working days. I would need my site up-and-running earlier than that, so I'd like to avoid it if possible. Am I locked in? As it seems, I am rather locked-in with GoDaddy. I can't use the domain with .htaccess since I can't upload such a file (and won't pay for hosting by GoDaddy). I can't use any of their forward options since none of them do what I want (one just forwards, the one that masks the URL does it with frames). Would you agree? Possible solutions Transfer the domain to any hosting service with reasonable hosting pricing, as opposed to GoDaddy (I'd probably use one.com, the same host as for myhost.com, in that case), and there either re-install wordpress on the new account, or use .htaccess with URL rewrite on the new account to fetch the contents from myhost.com/wordpress/. Can this be set-up to work with sub-pages as well? And visitors won't ever see "myhost.com/wordpress", just "mydomain.com"? E.i., mydomain.com/a/subpage/ wold fetch from myhost.com/wordpress/a/subpage/? This might be a long shot but: Find some free (preferrably) hosting allowing to point to their nameservers Make DNS settings at GoDaddy so that my domain appears at the site above at that site, put a .htaccess file with URL rewriting to forward to myhost.com/wordpress/ Could this be possible? What services could I use in that case? As I see it, this would be the only way not to have to transfer a domain (taking 5-7 working days) and not having to re-install the wordpress site. Sorry for the long question. All info and ideas are welcome.

    Read the article

  • Gnome-shell fails to load on 12.10

    - by Githlar
    I'm usually the one answering questions, but in this I'm throughly stumped! My Setup: Ubuntu 12.10 (Dist upgrade form 12.04) ATI M96 [Mobility Radeon HD 4650] Upon the first installation of 12.10 I had all kinds of issues getting the Legacy ATI drivers to install (I guess the source for the drivers isn't kosher with kernel 3.5). So, I added the repository ppa:makson96/fglrx - which has a version of the ATI source patched to work with kernel 3.5. After installation of fglrx-legacy from that PPA, gnome-shell and all my graphics work fine... until today. The Problem I unsuspended my computer today and the screen was black (not off, the black from the gnome lock screen). I'd move my mouse/hit a key and the background would flash and then it'd go back to black. Restarted via VT1 Logged into Gnome (gnome-shell) session, but no gnome-shell! Investigation: First, I went to VT1 and tried export DISPLAY=:0;gnome-shell --replace. It appeared to work fine, switch back to X and nothing. Went back to VT1 and saw this error message: JS ERROR: !!! Exception was: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO JS ERROR: !!! message = '"Object 0x7fc748129c30 is not a subclass of (null), it's a xO"' JS ERROR: !!! fileName = '"/usr/share/gnome-shell/js/ui/tweener.js"' JS ERROR: !!! lineNumber = '218' JS ERROR: !!! stack = '"()@/usr/share/gnome-shell/js/ui/tweener.js:218 wrapper()@/usr/share/gjs-1.0/lang.js:204 ()@/usr/share/gjs-1.0/lang.js:145 ()@/usr/share/gjs-1.0/lang.js:239 init()@/usr/share/gnome-shell/js/ui/tweener.js:49 init()@/usr/share/gnome-shell/js/ui/environment.js:96 @<main>:1 "' Window manager warning: Log level 32: Execution of main.js threw exception: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO Note: Everywhere it says "it's a xO", xO is actually garbled and changes every time (I'm thinking memory corruption?) This error is thrown by line 96 of /usr/share/gnome-shell/js/ui/environment.js: tweener.Init() Did a purge of fglrx-legacy, reboot, reinstall fglrx-legacy, reboot... same thing. Did a ppa-purge of ppa:gnome3-team/gnome3, and reinstalled gnome-shell and ubuntu-desktop from the standard repositores... same thing. I'm really at a loss here. I love gnome-shell and after using it for nearly a year now gnome classic just seems so archaic. Additional Information Apt log from the day I first suspended my machine (these are upgrades from the gnome3-team/gnome3 ppa and ubuntu-wine/ppa ppa): Start-Date: 2012-11-24 17:30:28 Commandline: aptdaemon role='role-commit-packages' sender=':1.618' Install: gkbd-capplet:amd64 (3.6.0-0ubuntu1), gnome-control-center-unity:amd64 (1.0-0ubuntu1~ubuntu12.10.1) Upgrade: nautilus:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), libgnome-control-center1:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), wine1.5-i386:i386 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), wine1.5:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), gnome-settings-daemon:amd64 (3.4.2-0ubuntu14, 3.6.3-0ubuntu1~ubuntu12.10.1), gnome-control-center-data:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), gnome-accessibility-themes:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), gnome-themes-standard:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), wine1.5-amd64:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), nautilus-data:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), gnome-control-center:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), libnautilus-extension1a:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1) End-Date: 2012-11-24 17:31:32 fglrxinfo (driver appears to be working): display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 4650 OpenGL version string: 3.3.11653 Compatibility Profile Context Does anybody have any further ideas?

    Read the article

  • The Social Content Conundrum

    - by Mike Stiles
    Here’s the social content conundrum: people who are not entertainers are being asked to entertain. Despite a world of skilled MBAs, marketing savants, technological innovators, analysts, social strategists and consultants, every development in social for brands keeps boomeranging right back to the same unavoidable truth. Success hinges on having content creators who know how to entertain the target audience. You can’t make this all about business-processes. You can’t make this all about technology, though data is critical and helps inform content. This is about having human beings who know the audience, know what they’d love to see, and can create the magic that will draw and hold them. Since showing up in the News Feed is critical for exposition and engagement, and since social ads primarily serve to amplify content that’s performing well, I’m comfortable saying content creators are becoming exponentially recruited and valued. They will no longer be commodities. They’ll be your stars. Social has fundamentally changed the relationship between brand and consumer. No longer can the customer be told to sit down, shut up, and listen to our ads. It’s now all about what consumers are willing to watch or read. Their patience for subjecting themselves to material they aren’t interested in is waning. Therefore, brands must now be producers of entertainment and information content, not merely placers of ads within someone else’s content. Social has given you a huge stage, with an audience sitting out there waiting to see what you’re going to do. What are you putting on that stage? For most corporate environments, entertaining is alien. It’s risky and subjective. Most operate around two foundational principles: control and fear. To entertain and inform with branded content, some control has to go. You control the product. Past that, control is being transferred into the hands of the consumer. The “fear first” culture also has to yield. If you strive to never make waves, you will move absolutely nothing. Because most corporations don’t house entertainers, they must be found then trusted. They’re usually a little weird. The ideas they’ll bring may seem “out there.” But like any business professional, they’ve gone through the training and experiences that make them uniquely good at what they do, even if you don’t quite understand them. It’s okay. It’s what the audience thinks that matters. Get it right, and you’ll be generating one ambassador after another who’s proud to be identified with the brand and will regularly consume and share your content. Entertainment entities are able to shape our culture and succeed beyond their wildest dreams by being beholden to one thing…what the public likes and wants. When brands put the same emphasis on crowd-pleasing content, they too will enjoy brand fame the likes of which they’ve never seen. The stage is yours. Now get out there and go for that applause.

    Read the article

< Previous Page | 681 682 683 684 685 686 687 688 689 690 691 692  | Next Page >