Search Results

Search found 20946 results on 838 pages for 'at command'.

Page 686/838 | < Previous Page | 682 683 684 685 686 687 688 689 690 691 692 693  | Next Page >

• Openfiler iSCSI performance

  - by Justin

  Hoping someone can point me in the right direction with some iSCSI performance issues I'm having. I'm running Openfiler 2.99 on an older ProLiant DL360 G5. Dual Xeon processor, 6GB ECC RAM, Intel Gigabit Server NIC, SAS controller with and 3 10K SAS drives in a RAID 5. When I run a simple write test from the box directly the performance is very good: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 4.64468 s, 226 MB/s So I created a LUN, attached it to another box I have running ESXi 5.1 (Core i7 2600k, 16GB RAM, Intel Gigabit Server NIC) and created a new datastore. Once I created the datastore I was able to create and start a VM running CentOS with 2GB of RAM and 16GB of disk space. The OS installed fine and I'm able to use it but when I ran the same test inside the VM I get dramatically different results: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 26.8786 s, 39.0 MB/s [root@localhost ~]# Both servers have brand new Intel Server NIC's and I have Jumbo Frames enabled on the switch, the openfiler box as well as the VMKernel adapter on the ESXi box. I can confirm this is set up properly by using the vmkping command from the ESXi host: ~ # vmkping 10.0.0.1 -s 9000 PING 10.0.0.1 (10.0.0.1): 9000 data bytes 9008 bytes from 10.0.0.1: icmp_seq=0 ttl=64 time=0.533 ms 9008 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.736 ms 9008 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=0.570 ms The only thing I haven't tried as far as networking goes is bonding two interfaces together. I'm open to trying that down the road but for now I am trying to keep things simple. I know this is a pretty modest setup and I'm not expecting top notch performance but I would like to see 90-100MB/s. Any ideas?

  Read the article

• Setting Ubuntu Global PATH for Ruby Enterprise Edition

  - by Wally Glutton

  Context: I recently installed Ruby Enterprise Edition (REE) on an Ubuntu 8.04 server. I would like for this new version of Ruby to globally supersede (for all users, crontabs, etc) the older version in /usr/local/bin. Attempted Solution #1: The REE documentation recommends placing the REE bin folder at the beginning of the global PATH in /etc/environment. I altered the PATH line in this file to read: PATH="/opt/ruby_ee/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games" This did affect my PATH at all. Attempted Solution #2: Next I followed these instructions and updated the PATH setting in the /etc/login.defs and /etc/crontab files. (I did not change /etc/sudoers.) This didn't affect my PATH either, even after logging out and rebooting the server. Other information: I seem to be having the same problem described here. I'm testing using the command: echo $PATH My shell is bash. My .bashrc doesn't not alter my PATH. I'm ssh'ed into the system for all testing. /opt/ruby_ee/ is a sym-link to /opt/ruby-enterprise-1.8.7-2011.03/

  Read the article

• How do I grant a database role execute permissions on a schema? What am I doing wrong?

  - by Lewray

  I am using SQL Server 2008 Express edition. I have created a Login , User, Role and Schema. I have mapped the user to the login, and assigned the role to the user. The schema contains a number of tables and stored procedures. I would like the Role to have execute permissions on the entire schema. I have tried granting execute permission through management studio and through entering the command in a query window. GRANT EXEC ON SCHEMA::schema_name TO role_name But When I connect to the database using SQL management studio (as the login I have created) firstly I cannot see the stored procedures, but more importantly I get a permission denied error when attempting to run them. The stored procedure in question does nothing except select data from a table within the same schema. I have tried creating the stored procedure with and without the line: WITH EXECUTE AS OWNER This doesn't make any difference. I suspect that I have made an error when creating my schema, or there is an ownership issue somewhere, but I am really struggling to get something working. The only way I have successfully managed to execute the stored procedures is by granting control permissions to the role as well as execute, but I don't believe this is the correct, secure way to proceed. Any suggestions/comments would be really appreciated. Thanks.

  Read the article

• solaris zpool SSD cache device "faulted"

  - by John-ZFS

  I am trying to get over these SATA SSD errors - smartctl command failed to read the SATA SSD - SATA is not supported what could be the reason for errors? does this mean that SSD has reached EOL & needs to be replacement? errors: No known data errors pool: zpool1216 state: DEGRADED status: One or more devices are faulted in response to persistent errors. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Replace the faulted device, or use 'zpool clear' to mark the device repaired. scan: scrub repaired 0 in 0h24m with 0 errors on Fri May 18 14:31:08 2012 config: NAME STATE READ WRITE CKSUM zpool1216 DEGRADED 0 0 0 raidz1-0 ONLINE 0 0 0 c11t10d0 ONLINE 0 0 0 c11t11d0 ONLINE 0 0 0 c11t12d0 ONLINE 0 0 0 c11t13d0 ONLINE 0 0 0 c11t14d0 ONLINE 0 0 0 c11t15d0 ONLINE 0 0 0 c11t16d0 ONLINE 0 0 0 c11t1d0 ONLINE 0 0 0 c11t2d0 ONLINE 0 0 0 c11t3d0 ONLINE 0 0 0 c11t4d0 ONLINE 0 0 0 c11t5d0 ONLINE 0 0 0 c11t6d0 ONLINE 0 0 0 c11t7d0 ONLINE 0 0 0 c11t8d0 ONLINE 0 0 0 c11t9d0 ONLINE 0 0 0 logs c9d0 FAULTED 0 0 0 too many errors cache c10d0 FAULTED 0 17 0 too many errors

  Read the article

• Can't install NPM after installing Node on EC2 Linux instance?

  - by frequent

  I'm trying my first attempt on getting a node server set up on an amazon ec2 linux instance. I think I made it quite far. First problem I ran into was when trying to make Node the connection timed out after a while, so I need three attempts until I got this: LINK(target) /home/ec2-user/node/out/Release/node: Finished touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_header.stamp touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_provider.stamp touch /home/ec2-user/node/out/Release/obj.target/node_dtrace_ustack.stamp touch /home/ec2-user/node/out/Release/obj.target/node_etw.stamp make[1]: Leaving directory `/home/ec2-user/node/out' ln -fs out/Release/node node Which tells me, "Node is done", although I'm not sure it is also working as it should. Following this,this and this tutorial, I'm now stuck at installing npm. I think I first cloned into the wrong folder, which always gave me error 127, but even if I'm doing this: cd ~ git clone git://github.com/isaacs/npm.git cd npm sudo -s PATH=/usr/local/bin:$PATH make install I'm still getting this: #after cloning# make[1]: Entering directory `/root/npm' node cli.js install bash: node: command not found make[1]: *** [node_modules/.bin/ronn] Error 127 make[1]: Leaving directory `/root/npm' make: *** [man/man3/start.3] Error 2 Question:: Since I'm pretty much a newby at everything I'm trying here, can someone please tell me what I'm doing wrong and how to get npm to install? Also, in case I cloned into the wrong folder, is there a way to remove the "false clone" or is this not written to disk until I call make install and I don't need to worry? Thanks for helping out!

  Read the article

• Can one config LDAP to accept auth from ssh-agent instead of from Kerberos?

  - by Alex North-Keys

  [This question is not about getting your LDAP password to authenticate you for SSH logins. We have that working just fine, thank you :-) ] Let's suppose you're on a Linux network (Ubuntu 11.10, slapd 2.4.23), and you need to write a set of utilities that will use ldapmodify, ldapadd, ldapdelete, and so on. You don't have Kerberos, and don't want to deal with its timeouts (most users don't know how to get around this), quirks, etc. This resolves the question to one of where else to get credentials to feed to LDAP, probably through GSSAPI - which technically doesn't require Kerberos despite its dominance there - or something like it. However, nearly everyone seems to have an SSH agent program, complete with its key cache. I'd really like an ssh-add to be sufficient to allow passwordless LDAP command use. Does anyone know of a project working on using the SSH agent as the source of authentication to LDAP? It might be through an ssh-aware GSSAPI layer, or some other trick I haven't thought of. But it would be wonderful for making LDAP effortless. Assuming I haven't just utterly missed a way to use ldapmodify and kin without having to type my LDAP passwords - using -x is NOT acceptable. At my site, the LDAP server only accepts ldaps connections, and requires authentication for modifying operations. Those are requirements, of course. Any ideas would be greatly appreciated. :-)

  Read the article

• Bash script 'while read' loop causes 'broken pipe' error when run with GNU Parallel

  - by Joe White

  According to the GNU Parallel mailing list this is not a GNU Parallel-specific problem. They suggested that I post my problem here. The error I'm getting is a "broken pipe" error, but I feel I should first explain the context of my problem and what causes this error. It happens when trying to use any bash script containing a 'while read' loop in GNU Parallel. I have a basic bash script like this: #!/bin/bash # linkcheck.sh while read domain do host "$domain" done Assume that I want to pipe in a large list (250mb say). cat urllist | ./linkcheck.sh Running host command on 250mb worth of URLs is rather slow. To speed things up I want to break up the input into chunks before piping it and then run multiple jobs in parallel. GNU Parallel is capable of doing this. cat urllist | parallel --pipe -j0 parallel ./linkcheck.sh {} {} is substituted by the contents of urllist line-by-line. Assume that my systems default setup is capable of running 500ish jobs per instance of parallel. To get round this limitation we can parallelize Parallel itself: cat urllist | parallel -j10 --pipe parallel -j0 ./linkcheck.sh {} This will run 5000'ish jobs. It will also, sadly, cause the error "broken pipe" (bash FAQ). Yet the script starts to work if I remove the while read loop and take input directly from whatever is fed into {} e.g., #!/bin/bash # linkchecker.sh domain="$1" host "$1" Why will it not work with a while read loop? Is it safe to just turn off the SIGPIPE signal to stop the "broken pipe" message, or will that have side effects such as data corruption? Thanks for reading.

  Read the article

• Editing a windows XP installation's registry without being able to log in.

  - by Alain

  I've got a windows XP installation that has a corrupt registry. A worm (which was removed) had hijacked the HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon entry (which should have a value of Userinit=C:\windows\system32\userinit.exe When the worm was removed, the corrupt entry was deleted entirely, and now the system automatically logs off immediately after attempting to log in. Regardless of the user and boot mode, no accounts can be logged in to. The only thing required to correct this behavior is to restore the registry key, but I cannot come up with any ways of editing the registry without logging in to an account. I tried remotely connecting to the registry but the required services aren't enabled on the machine. I tried booting on the same machine using the BartPE boot CD but I could not find any way of editing the registry on the C:\Windows installation - running regedit only modifies the X:\I386\ registry in memory. So, what can I use modify the registry of an un-login-able Windows XP instance so that I can log in again? Thanks guys. EDIT: The fix worked. The solution to the auto-logoff problem was, as hoped, to simply add the value mentioned above to the appropriate registry entry. This can be done using the BartPE Boot CD, as described in the accepted answer below, but I used the Offline NT Registry Editor software mentioned in another answer. The steps were: Boot from the NT Registry Editor CD Follow the directions until the appropriate boot sector is loaded. Instead of using one of the default options for modifying passwords or user accounts, type "software" to edit that hive. Type '9' to enter the command line based registry editor. Type "cd Microsoft" (enter) "cd Windows NT" (enter) "cd CurrentVersion" (enter) "cd Winlogon" (enter) Type "nv 1 Userinit" to create a new value under the Winlogon key Type "ev Userinit" to edit the new value, and when prompted, type "C:\windows\system32\userinit.exe" (enter) Type 'q' to quit the registry editor, and as you back out of the system, follow directions to write the hive back to disk. Restart your computer and log in - problem solved. (generic 'warning: back up your registry' disclaimer)

  Read the article

• What DBus signal is sent on system suspend?

  - by Paul Robinson

  Hello, I need to detect when a machine is going to sleep in Ubuntu 9.10 and Fedora 13. Both use UPower, so I've been looking on the "org.freedesktop.UPower" DBus bus for such signals. I've been listening for the "sleeping" signal on the UPower bus with the following command: dbus-monitor --system "type='signal',interface='org.freedesktop.UPower',member='Sleeping'" When I sleep the machine (either by closing the lid, selecting "shutdown - suspend" or sending a DBus message) I don't see a "sleeping" event. I notice that the "Sleeping" event is sent when the "org.freedesktop.UPower.AboutToSleep" method is invoked. I can do this manually by calling: dbus-send --print-reply --system --dest=org.freedesktop.UPower /org/freedesktop/UPower org.freedesktop.UPower.AboutToSleep And I notice the "sleeping" signal is fired. My understanding is that anything that sleeps the PC must send the "AboutToSleep" signal before hand. It doesn't seem like this is happening. I've tried these steps on both Fedora 13 and Ubuntu 9.10 and I see the same results. Can anyone explain what's happening or provide me with an alternative DBus signal to listen for? Many thanks, Paul

  Read the article

• Apache HTTPD - Segmentation fault when loading mod_jk module

  - by hansengel

  I just set up mod_jk with my Apache httpd 2.0.52 installation, but now when I try to start Apache, it has a segmentation fault. I've checked that I am using the mod_jk compiled for 2.0.x.. built against the same version I have, in fact. I've also verified that the path I'm giving to LoadModule is correct, and the permissions and the ownership of the file are the same as the rest of the modules'. When I remove the "LoadModule" command for mod_jk from my httpd.conf, there is no segmentation fault. Nothing shows in Apache's error logs. I have tried restarting the server with this module using both service httpd restart and httpd. These are the last few lines returned of strace httpd -X: gettimeofday({1292100295, 434487}, NULL) = 0 socket(PF_INET6, SOCK_STREAM, IPPROTO_IP) = -1 EAFNOSUPPORT (Address family not supported by protocol) socket(PF_NETLINK, SOCK_RAW, 0) = 3 bind(3, {sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 0 getsockname(3, {sa_family=AF_NETLINK, pid=22378, groups=00000000}, [12]) = 0 time(NULL) = 1292100295 sendto(3, "\24\0\0\0\26\0\1\3\307\342\3M\0\0\0\0\0\305\333\267", 20, 0, {sa_family=AF_NETLINK, pid=0, groups=00000000}, 12) = 20 recvmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(1)=[{"<\0\0\0\24\0\2\0\307\342\3MjW\0\0\2\10\200\376\1\0\0\0"..., 4096}], msg_controllen=0, msg_flags=0}, 0) = 664 recvmsg(3, {msg_name(12)={sa_family=AF_NETLINK, pid=0, groups=00000000}, msg_iov(1)=[{"\24\0\0\0\3\0\2\0\307\342\3MjW\0\0\0\0\0\0\1\0\0\0\10\0"..., 4096}], msg_controllen=0, msg_flags=0}, 0) = 20 close(3) = 0 socket(PF_INET, SOCK_STREAM, IPPROTO_IP) = 3 --- SIGSEGV (Segmentation fault) @ 0 (0) --- +++ killed by SIGSEGV +++ Process 22378 detached Has anyone had a similar problem using Apache 2.0.52 with mod_jk? I might try downloading and building the source for the Apache server and mod_jk myself if there isn't a discovered fix for this.

  Read the article

• Postgresql server will not start

  - by Claudiu

  I'm on Windows 7. I restarted my computer. I then tried to connect to the database and got an error. I don't remember which one in particular but it was some connection issue. I decided to try to restart the server, so I clicked on "Restart server" from the start menu. This blocked. After a few minutes I killed the process and tried again, only to get a "The service is starting or stopping. Please try again later." message. I rebooted the computer again, tried to start again, and got the same error. I killed the pg_ctl process and tried starting it manually, but that didn't work either: C:\Users\DrClaud>cscript "C:\Program Files\PostgreSQL\8.3\scripts\serverctl.vbs" start wait Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. The PostgreSQL Server 8.3 service is starting................................... ....................................... The PostgreSQL Server 8.3 service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534. The start command returned an error (2) Any ideas?

  Read the article

• Making OpenSSL work on PHP Windows 2008 server with FastCGI

  - by KacieHouser

  I have been researching all day. Here is what I have done: In C:/PHP/php.ini and C:/PHP/php-cgi-fcgi.ini I have made the extension_dir = "C:/PHP/ext" I uncommented extension=php_openssl.dll I went to http://windows.php.net/download/ and got the thread safe version with the PHP 5.4 (5.4.8) version of DLL's In C:/PHP/ext I replaced the php_openssl.dll with the one I downloaded In System32 and SysWOW64 I added the following DLL's ssleay.dll libeay.dll I restarted the IIS server in the Server Manager under Web Server and stopped and started the World Wide Web Publishing Service That didn't work, so I tried same thing with the unthreaded versions. I still get: Fatal error: Call to undefined function ftp_ssl_connect() in C:\inetpub\wwwroot\REMOVED_dev\save_data.php on line 5 Here are related things from phpinfo(): System Windows NT DEV-WEB1 6.1 build 7601 (Windows Server 2008 R2 Standard Edition Service Pack 1) i586 Compiler MSVC9 (Visual C++ 2008) Architecture x86 Configure Command cscript /nologo configure.js "--enable-snapshot-build" "--enable-debug-pack" "--disable-zts" "--disable-isapi" "--disable-nsapi" "--without-mssql" "--without-pdo-mssql" "--without-pi3web" "--with-pdo-oci=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8=C:\php-sdk\oracle\instantclient10\sdk,shared" "--with-oci8-11g=C:\php-sdk\oracle\instantclient11\sdk,shared" "--with-enchant=shared" "--enable-object-out-dir=../obj/" "--enable-com-dotnet" "--with-mcrypt=static" "--disable-static-analyze" "--with-pgo" Server API CGI/FastCGI Configuration File (php.ini) Path C:\Windows Loaded Configuration File C:\PHP\php-cgi-fcgi.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) Registered PHP Streams php, file, glob, data, http, ftp, zip, compress.zlib, compress.bzip2, https, ftps, sqlsrv, phar Registered Stream Socket Transports tcp, udp, ssl, sslv3, sslv2, tls FTP support enabled Protocols dict, file, ftp, ftps, gopher, http, https, imap, imaps, ldap, pop3, pop3s, rtsp, scp, sftp, smtp, smtps, telnet, tftp openssl OpenSSL support enabled OpenSSL Library Version OpenSSL 0.9.8t 18 Jan 2012 OpenSSL Header Version OpenSSL 0.9.8x 10 May 2012 What am I missing here?

  Read the article

• How to access programs in one PC using another PC

  - by darkstar13

  Hi, I was recently given an old PC for my remote access at work. The CPU that comes with it has Windows XP installed, 400+ MB of ram, all USB devices disabled. I access my work applications using VPN / Citrix. Basically, it' sooooo slow. Plus it's bulky and it will just occupy space, so I am now hoping to find a way for me to integrate this work PC with my home PC. I tried to put in the hard drive in my home PC CPU, and set the drive as slave. However, when I booted my PC from this hard drive, I am stuck at the screen where windows is prompting me to select how am I going to boot (ex. Safe Mode, Safe mode with command prompt, Last Working Configuration, etc), but whatever option I select, I am still stuck at this option after reboot. I am thinking if maybe I can clone the drive and mount the cloned drive and access the system as a virtual machine. But I don't know if that will work. I would like to know if there's something I can do so I can work at home using my home PC, where I can access my work programs to connect to VPN / Citrix. My home PC's OS is Windows 7 Ultimate x64.

  Read the article

• Hiera can't find puppet environment

  - by quickshiftin

  I'm testing out hiera and hitting a snag on the hierarchy configuration. What I have is extremely simple, the part that isn't working is specification of hiera datadir files based on environment. Here's the config file (/etc/hiera.yaml) I'm trying --- :backends: - yaml :logger: console :hierarchy: - "%{::environment}" :yaml: :datadir: /var/lib/hiera Now, I have a file /var/lib/hiera/development.yaml blah: meh When I run hiera it's not finding the file or the value $ hiera -d blah DEBUG: Fri Oct 25 15:50:52 -0600 2013: Hiera YAML backend starting DEBUG: Fri Oct 25 15:50:52 -0600 2013: Looking up blah in YAML backend nil I've verified this agent is configured for development $ sudo puppet agent --configprint environment development Now let me prove hiera is capable of finding something; a change to the hiera.yaml file: :hierarchy: - development And now hiera finds the file and the value $ hiera -d blah DEBUG: Fri Oct 25 15:53:25 -0600 2013: Hiera YAML backend starting DEBUG: Fri Oct 25 15:53:25 -0600 2013: Looking up blah in YAML backend DEBUG: Fri Oct 25 15:53:25 -0600 2013: Looking for data source development DEBUG: Fri Oct 25 15:53:25 -0600 2013: Found blah in development meh So why isn't it working with the dynamic environment configuration? I got that straight from the documentation. Note, I have tried running the hiera command via sudo with no change in the result.

  Read the article

• pure-ftpd not listening on specified port

  - by Jason McLaren

  I installed the pure-ftpd package (version 1.0.35-1) on an Ubuntu 12.04 box (an EC2 instance based on the standard Ubuntu 12.04 AMI). The pure-ftpd daemon is running (verified with ps), though there is no PID file (expected one to be created by the /etc/init.d/pure-ftpd script). Here's the resulting command that gets run by the init.d script: /usr/sbin/pure-ftpd -l pam -O clf:/var/log/pure-ftpd/transfer.log -o -8 UTF-8 -u 1000 -E -B -g /var/run/pure-ftpd/pure-ftpd.pid Here's my real problem: the ftp server isn't actually listening on any port (checked with netstat and nmap). So I can't ftp to the server (either locally using localhost or remotely using the public IP address). I tried adding a Bind file to /etc/pure-ftpd/conf and restarting, but it didn't help. When I installed pure-ftpd, it replaced inetd with openbsd-inetd, but did not run it since there were no services enabled. So inetd is not listening on port 21 either. (Apparently Ubuntu has a no-inetd-by-default policy, according to https://lists.ubuntu.com/archives/ubuntu-users/2010-September/227905.html .) I want to run pure-ftpd by itself (not with inetd) anyways, since the /etc/init.d/pure-ftpd script requires no inetd if you use the UploadScript feature. I'm not familiar with how Ubuntu handles network services (and can't find any relevant docs besides generic man pages), so I'm probably missing something obvious. Nothing seems out of the ordinary with /etc/hosts.allow (empty) or hosts.deny (empty), and I didn't add any firewall rules (iptables -L shows that the firewall is in its initial state). I've checked the pure-ftpd docs; not sure what else to look at. Any help would be appreciated, thanks!

  Read the article

• Subversion 1.6 + SASL : Only works with plaintext 'userPassword'?

  - by SiegeX

  I'm attempting to setup svnserve with SASL support on my Slackware 13.1 server and after some trial and error I'm able to get it to work with the configuration listed below: svnserve.conf [general] anon-access = read auth-access = write realm = myrepo [sasl] use-sasl = true min-encryption = 128 max-encryption = 256 /etc/sasl2/svn.conf pwcheck_method: auxprop auxprop_plugin: sasldb sasldb_path: /etc/sasl2/my_sasldb mech_list: DIGEST-MD5 sasldb users $ sasldblistusers2 -f /etc/sasl2/my_sasldb test@myrepo: cmusaslsecretOTP test@myrepo: userPassword You'll notice that the output of sasldblistusers2 shows my test user as having both an encrypted cmusaslsecretOTP password as well as a plain text userPassword passwd. i.e., if I were to run strings /etc/sasl2/my_sasldb I would see the test users' password in plaintext. These two password entries were created with the following subversion book recommended command: saslpasswd2 -c -f /etc/sasl2/my_sasldb -u myrepo test After reading man saslpasswd2 I see the following option: -n Don't set the plaintext userPassword property for the user. Only mechanism-specific secrets will be set (e.g. OTP, SRP) This is exactly what I want to do, suppress the plain text password and only use the mechanism-specific secret (OTP in my case). So I clear out /etc/sasl2/my_sasldb and rerun saslpasswd2 as: saslpasswd2 -n -c -f /etc/sasl2/my_sasldb -u myrepo test I then follow it up with a sasldblistusers2 and I see: $ sasldblistusers2 -f /etc/sasl2/my_sasldb test@myrepo: cmusaslsecretOTP Perfect! I think, now I have only encrypted passwords.... only neither the Linux svn client nor the Windows TortoiseSVN client can connect to my repo anymore. They both present me with the user/pass challenge but that's as far as I get. TLDR So, what is the point of SVN supporting SASL if my sasldb must store its passwords in plaintext to work?

  Read the article

• How can I close a port that appears to be orphaned by Xvfb?

  - by Jim Fiorato

  I'm running Xvfb on a FC8 Amazon EC2 image. On occasion Xvfb will crash (unable at the moment to find out the reason for the crash), and after crashing the TCP port will appear to be orphaned. I'm unable to get a PID to kill any process that may be using it. I'm starting Xvfb with: Xvfb :7 -screen 0 1024x768x24 & Examples of what I'm working with are below, the Xvfb port is (was) 6007: # netstat -ap Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:ssh *:* LISTEN 1894/sshd tcp 0 0 *:6007 *:* LISTEN - tcp 0 352 ip-10-84-69-165.ec2.int:ssh c-71-194-253-238.hsd1:51689 ESTABLISHED 2981/0 udp 0 0 *:bootpc *:* 1817/dhclient udp 0 0 *:bootpc *:* 1463/dhclient Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ] DGRAM 871 668/udevd @/org/kernel/udev/udevd unix 2 [ ACC ] STREAM LISTENING 5385 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 6 [ ] DGRAM 5353 1867/rsyslogd /dev/log unix 2 [ ] DGRAM 11861 2981/0 unix 2 [ ] DGRAM 5461 1974/crond unix 2 [ ] DGRAM 5451 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5438 1880/dbus-daemon /var/run/dbus/system_bus_socket unix 3 [ ] STREAM CONNECTED 5437 1904/console-kit-da unix 3 [ ] STREAM CONNECTED 5396 1880/dbus-daemon unix 3 [ ] STREAM CONNECTED 5395 1880/dbus-daemon unix 2 [ ] DGRAM 5361 1871/rklogd # lsof -i COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME dhclient 1463 root 3u IPv4 4704 UDP *:bootpc dhclient 1817 root 4u IPv4 5173 UDP *:bootpc sshd 1894 root 3u IPv4 5414 TCP *:ssh (LISTEN) sshd 2981 root 3u IPv4 11825 TCP ip-10-84-69-165.ec2.internal:ssh->c-71-194-253-238.hsd1.il.comcast.net:51689 (ESTABLISHED) Attempting to force the port closed with iptables doesn't seem to work either. iptables -A INPUT -p tcp --dport 6007 -j DROP I'm at a loss as to how to reclaim/free the port. From what I can tell, this port will remain in this state until the EC2 instance is shut down. So, how can I close this port so I can restart Xvfb?

  Read the article

• gpfs: adding a new nsd server to a cluster

  - by alessandra

  I have a gpfs cluster composed by 10 linux nodes, managed by a primary server A, which also act as nsd server for a first stack of disks. I attached a new jbod to one of the nodes (call it node B), which I would like to become a nsd server for this new stack of disks, but still be included in the cluster so that the disks are available to all the nodes. Node B is connected to the cluster via ethernet. How can I make the new nsd seen by all the nodes of the cluster? I can create the new nsd but when trying to create the filesystem on node B it the command mmcrfs times out. It looks like the nodes of the cluster cannot understand the filesystem location even if I specify them attached to server B in the description file. Would it be better to remove node B from the cluster, create a cluster on its own with its attached filesystem and connect it remotely with the previous cluster? Or a clustered NFS solution would apply better? Can you please give me any suggestion?

  Read the article

• Don't let the mouse wake up displays from standby

  - by progo

  I like to put my displays to powersave/standby mode when I leave the computer for a while. It would be ok if it weren't for oversensitive mouse. Sometimes the driver reads in some movement that's not visible to the naked eye (the cursor, that is) and it breaks the power save. It would wait for another 10 minutes before going back to its standby. My workaround is the following script bound to C-S-q: xlock -startCmd 'xset dpms 2 2 2' -endCmd 'xset dpms 600 1200 1300' -mode blank -echokeys -timeelapsed +usefirst By using xset I set the values to 2 seconds each before going to standby. It's not nice, anyway. Sometimes there are cool fortunes that I want to read before typing in the password. I could keep the cursor moving but it's cludgy. (By the way, xlock's option mousemotion doesn't help -- it just hides the cursor but the displays fire up nevertheless.) So the question: is there a way to make displays go standby and stay there until a keyboard key is pressed? I'm running gentoo and recent Xorg, but I hope the answer doesn't have to be distro-specific. Basically the answer can be as simple as how to enable/disable mouse within command line? It think that would do the job if DPMS doesn't know the idea.

  Read the article

• Can't get SSH public key authentication to work

  - by Trey Parkman

  My server is running CentOS 5.3. I'm on a Mac running Leopard. I don't know which is responsible for this: I can log on to my server just fine via password authentication. I've gone through all of the steps for setting up PKA (as described at http://www.centos.org/docs/5/html/Deployment_Guide-en-US/s1-ssh-beyondshell.html), but when I use SSH, it refuses to even attempt publickey verification. Using the command ssh -vvv user@host (where -vvv cranks up verbosity to the maximum level) I get the following relevant output: debug2: key: /Users/me/.ssh/id_dsa (0x123456) debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug3: start over, passed a different list publickey,gssapi-with-mic,password debug3: preferred keyboard-interactive,password debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password followed by a prompt for my password. If I try to force the issue with ssh -vvv -o PreferredAuthentications=publickey user@host I get debug2: key: /Users/me/.ssh/id_dsa (0x123456) debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug3: start over, passed a different list publickey,gssapi-with-mic,password debug3: preferred publickey debug3: authmethod_lookup publickey debug3: No more authentication methods to try. So, even though the server says it accepts the publickey authentication method, and my SSH client insists on it, I'm rebutted. (Note the conspicuous absence of an "Offering public key:" line above.) Any suggestions?

  Read the article

• MemCache-repcached compile error

  - by Ramy Allam

  I'm trying to install [memcached-1.2.8-repcached-2.2.1]( http://sourceforge.net/projects/repcached/files/latest/download?source=files) And I have the following error after running the make command: make all-recursive make[1]: Entering directory `/usr/local/src/pro/memcached-1.2.8-repcached-2.2.1' Making all in doc make[2]: Entering directory `/usr/local/src/pro/memcached-1.2.8-repcached-2.2.1/doc' make[2]: Nothing to be done for `all'. make[2]: Leaving directory `/usr/local/src/pro/memcached-1.2.8-repcached-2.2.1/doc' make[2]: Entering directory `/usr/local/src/pro/memcached-1.2.8-repcached-2.2.1' gcc -DHAVE_CONFIG_H -I. -DNDEBUG -g -O2 -MT memcached-memcached.o -MD -MP -MF .d eps/memcached-memcached.Tpo -c -o memcached-memcached.o test -f 'memcached.c' || echo './'memcached.c memcached.c: In function ‘add_iov’: memcached.c:697: error: ‘IOV_MAX’ undeclared (first use in this function) memcached.c:697: error: (Each undeclared identifier is reported only once memcached.c:697: error: for each function it appears in.) make[2]: * [memcached-memcached.o] Error 1 make[2]: Leaving directory `/usr/local/src/pro/memcached-1.2.8-repcached-2.2.1' make[1]: * [all-recursive] Error 1 make[1]: Leaving directory `/usr/local/src/pro/memcached-1.2.8-repcached-2.2.1' make: * [all] Error 2 OS : Centos5.7 64bit gcc-4.1.2-51.el5 gcc-c++-4.1.2-51.el5 libgcc-4.1.2-51.el5 Note : Memcached and memcache extension for php are already installed root@server[~]# memcached -h memcached 1.4.5 php ext http://pecl.php.net/get/memcache-2.2.6.tgz

  Read the article

• Virtualbox Headless Server on Ubuntu missing VRDP Options

  - by The Daemons Advocate

  I'm running VirtualBox headless server on an Ubuntu 64 bit host, and I want to use it remotely. However, I'm having problems connecting via RDP. The DNS names in my network show the host to be 'server', and the guest to be 'ubuntu-vm'. From the official documentation, I gather that I am to connect to server on the default RDP port in order to see the guest machine. I start the virtual machine like so: vboxheadless -startvm My_VM Then I connect on my laptop, and I get... rdesktop -a 16 server ERROR: server: unable to connect So next I consult the documentation further, and I find there are RDP flags that can be turned on (but should be on implicitly for a headless server). So I pull up information using 'vboxmanage showvminfo My_VM', and I find the VRDP property is off. VRDP Connection: not active To make things even weirder, RDP flag seems to be missing from vboxmanage. I've installed straight from the ubuntu repo's using the virutalbox-ose package, not sure how that measures up against the official docs. For instance, this command doesn't exist: VBoxManage modifyvm My_VM --vrdp on From the UI, the VM's Settings regarding Display have greyed out the 'remote Display' option. What I'm looking for is advice :). I'm open to suggestions that don't involve starting again with something like VMWare. Thanks in advance!

  Read the article

• Running Mathematica-5 remotely

  - by oxinabox.ucc.asn.au

  I have Mathematica 5 - a powerful CAS. I have a cheap netbook (running Windows XP), wich not only is too slow to run mathmatica on, I doubt it has the harddrive space. I do however have remote access to a number of very powerful computers, (most of wich run variose Linuxes, but one of which is Windows Server 2008, though I'ld rather not use this one*). Mostly over SSH but other protocols can be arraged for some, I'm sure. So I'ld like to install Mathematica onto one of these machine and then run it remotely. Either from the command line via Putty or via some other method. I glanced through the mathematical documentation and read something about using some MathLink program, which links the front end installed on my computer to a remote kernel. Anyone have any experience with this? I'm not sure if this belongs here or in SuperUser. At the moment, it's being tinkered with, and when the tinkering stops it'll likely be used to run multiple thin terms. As compared to the Linux machines: I have access to a dual 2.4 Xeon with 3GB RAM, which the rest of the world seems to have completely forgotten about (runs freeBSD!).

  Read the article

• How to kill unkillable Python-processes running as root

  - by Andrei

  I am experiencing an annoying problem with sshuttle running it on 10.7.3, MBA with the latest firmware update -- after I stop it (ctrl+c twice), or loose connection, or close the lid, I cannot restore it until I restart the system. The restarting takes notably more time, than it would normally take. I have tried to flush ipfw rules - not helping. Could you advice me how to restore sshuttle connection (without restarting os)? The following processes remain running as root, which I do not know how to kill (tried sudo kill -9 <pid> with no luck): root 14464 python ./main.py python -v -v --firewall 12296 12296 root 14396 python ./main.py python -v -v --firewall 12297 12297 root 14306 python ./main.py python -v -v --firewall 12298 12298 root 3678 python ./main.py python -v -v --firewall 12299 12299 root 2263 python ./main.py python -v -v --firewall 12300 12300 The command I use to run proxy: ./sshuttle --dns -r [email protected] 10.0.0.0/8 -vv The last message I get trying to restore the connection: ... firewall manager: starting transproxy. s: Ready: 1 r=[4] w=[] x=[] s: < channel=0 cmd=PING len=7 s: > channel=0 cmd=PONG len=7 (fullness=554) s: mux wrote: 15/15 s: Waiting: 1 r=[4] w=[] x=[] (fullness=561/0) >> ipfw -q add 12300 check-state ip from any to any >> ipfw -q add 12300 skipto 12301 tcp from any to 127.0.0.0/8 >> ipfw -q add 12300 fwd 127.0.0.1,12300 tcp from any to 10.0.0.0/8 not ipttl 42 keep-state setup >> ipfw -q add 12300 divert 12300 udp from any to 10.0.1.1/32 53 not ipttl 42 >> ipfw -q add 12300 divert 12300 udp from any 12300 to any not ipttl 42 Update: $ ps -ax|grep python 1611 ?? 0:06.49 python ./main.py python -v -v --firewall 12300 12300 48844 ?? 0:00.05 python ./main.py python -v -v --firewall 12299 12299 49538 ttys000 0:00.00 grep python

  Read the article

• How can I install Satchmo?

  - by Jonathan Hayward

  I am trying to install Satchmo 0.9 on an Ubuntu 9.10 32-bit guest off of the instructions at http://bitbucket.org/chris1610/satchmo/downloads/Satchmo.pdf. I run into difficulties at 2.1.2: pip install -r http://bitbucket.org/chris1610/satchmo/raw/tip/scripts/requirements.txt pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo The first command fails because a compile error for how it's trying to build PIL. So I ran an "aptitude install python-imaging", locally copy the first line's requirements.text, and remove the line that's unsuccessfully trying to build PIL. The first line completes without reported error, as does the second. The next step tells me to change directory to the /path/to/new/store, and run: python clonesatchmo.py A little bit of trouble here; I am told that clonesatchmo.py will be in /bin by now, and it isn't there, but I put some Satchmo stuff under /usr/local, create a symlink in /bin, and run: python /bin/clonesatchmo.py This gives: jonathan@ubuntu:~/store$ python /bin/clonesatchmo.py Creating the Satchmo Application Traceback (most recent call last): File "/bin/clonesatchmo.py", line 108, in <module> create_satchmo_site(opts.site_name) File "/bin/clonesatchmo.py", line 47, in create_satchmo_site import satchmo_skeleton ImportError: No module named satchmo_skeleton A find after apparently checking out the repository reveals that there is no file with a name like satchmo*skeleton* on my system. I thought that bash might be prone to take part of the second pip invocation's URL as the beginning of a comment; I tried both: pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9\#egg=satchmo pip install -e hg+http://bitbucket.org/chris1610/satchmo/@v0.9#egg=satchmo Neither way of doing it seems to take care of the import error mentioned above. How can I get a Satchmo installation under Ubuntu, or at least enough of a Satchmo installation that I am able to start with a skeleton of a store and then flesh it out the way I want? Thanks, Jonathan

  Read the article

< Previous Page | 682 683 684 685 686 687 688 689 690 691 692 693  | Next Page >