Search Results

Search found 48308 results on 1933 pages for 'embedded system'.

Page 687/1933 | < Previous Page | 683 684 685 686 687 688 689 690 691 692 693 694  | Next Page >

• How to recover lost files after an install

  - by Gentry McColm

  I'm a newbie learning along the way. I recently installed a 2nd hdd into my ubuntu box. Have one of about 160g which runs ubuntu 12.04. And the new hdd was 1 tb, used for holding videos. I had set up 2nd drive as ext3 I believe. And set up folders on it to hold the videos. Worked great. Also thought I had set it up for auto mount. I was able to read and write on it. Etc. Computer froze, so had to reboot it. When I did, system would not reboot: hung on the Ubuntu screen with 5 dots. I hit a few buttons and the command screen showed up, indicating that my 2nd hdd would not mount. Stopped up whole system. Tried rebooting, no go. Had to reinstall ubuntu on the 1st hdd. Did not apparently touch the 2nd one. Well, when I got it up and running, my 2nd hdd mounted automatically (yeah!), but now I cannot find my videos I already had on it. I had not put any more than about 30g of videos on it, but now when I read its Properties, it says I'm using about 50g. So, I'm wondering if somewhere in that, buried, are my 17 videos. Any help in recovering this? Thanks!

  Read the article

• HDMI & Display Port stopped work on 11.10

  - by dizzy

  After upgraded two laptops to 11.10, HDMI and Display ports stopped to work. Symptoms on each (btw. it used to work with 11.04 on both): laptop Dell Inspiron 1525 (HDMI, Intel GMX 3100): after HDMI cable is plugged in, screen is corrupted (no panel, no icons), system is unresponsive, TV set receives some signal, but only blue screen and some regular ticks can be heard. Unplugging the cable system recovers. No logs were checked. Thinkpad W510 (DisplayPort, NVidia). Simple "Screens" utility does not recognizes TV set, but this is something to do with the differences between Nvidia driver API and the one expected from the utility, as far I could spot on the net. However, using Nvidia-settings, TV is recognized, but cannot be enabled and used. Beside that, touch pad freezes after HDMI2DisplayPort connector is plugged in the laptop (not immediately, but after few seconds - probably after some handshake with the TV set crashes). It is strange that no such bug reports can be found on the net. So, I guess it is something wrong on our laptops only, but would appreciate some hints (i.e. any known changes recently related to HDMI, Display Port, X-Windows, kernel... wherever I should take a look and fix the issue).

  Read the article

• SQL Server Configuration Scripting Utility Release 9

  - by Bill Graziano

  There’s another update to my little utility to script a SQL Server’s configuration.  I use this for two purposes.  First, I use it to keep my database mirroring servers up to date.  Second, I capture the output in a version control system and keep that for historical reference. In release 3.0.9 I made the following changes: Rewrote the encrypted trigger scripting.  It will now list the encrypted triggers in a comment in the table script but can’t actually script them. It now scripts any server event notifications. You can script a single database using the /scriptdb flag.  Please note that it will also script the instance and system databases when it does this. It will script any user-defined endpoints.  This will capture your mirroring endpoints and more importantly any service broker endpoints. It will gracefully skip database mail on the Express Edition. It still doesn’t support SQL Server 2012.  I think that’s the next feature to add though.

  Read the article

• I cannot change the grub Default item from OS-1, but I can from OS-2 (dual-boot 10.04 on both)

  - by fred.bear

  My 10.04 system (OS-1) got into a tangle the other day, so I installed a second, dual-boot 10.04 (OS-2), so that I could trouble-shoot the hung system... In case it is relevant to my question, I'll mention that since I got OS-1 working again, it has shown a few battle wounds from its ordeal (.. actually the ordeal was mine ... trying to figure it all out ;) ... I lost some custom settings, but not all. (For the curious: the hangup was caused by rsync writing 600 GB to OS-1's 320 GB drive.. The destination drive was unmounted at the time, and rsync dutifully wrote directly to /media/usb_back; filling it to capacity... I have since, ammended my script :) Because the dual-boot MBR was prepared by OS-2, it is first on the grub list.. However, I want OS-1 to be the default OS to boot... From OS-1, I tried two methods to change the grub-menu's defaule OS. eg. Directly editing /etc/default/grub (then update-grub) Running 'Startup Manager' (then update-grub) Neither of these methods had any effect... so I started OS-2, and tried method 1... It worked! Why can I not change the grub menu from OS-1? .. or if it can be done, How?

  Read the article

• Using mod_rewrite for a Virtual Filesystem vs. Real Filesystem

  - by philtune

  I started working in a department that uses a CMS in which the entire "filesystem" is like this: create a named file or folder - this file is given a unique node (ex. 2345) as well as a default "filename" (ex. /WelcomeToOurProductsPage) and apply a template assign one or more aliases to the file for a URL redirect (ex. /home-page-products - can also be accessed by /home-page-products.aspx) A new Rewrite command is written on the .htaccess file for each and every alias Server accesses either /WelcomeToOurProductsPage or /home-page-products and redirects to something like /template.aspx?tmp=2&node=2345 (here I'm guessing what it does - I only have front-end access for now - but I have enough clues to strongly assume) Node 2345 grabs content stored in a SQL Db and applies it to the template. Note: There are no actual files being created on the filesystem. It's entirely virtual. This is probably a very common thing, but since I have never run across this kind of system before two months ago, I wanted to explain it in case it isn't common. I'm not a fan at all of ASP or closed-sourced systems, so it may be that this is common practice for ASP developers. My question, that has taken far too long to ask, is: what are the benefits of this kind of system, as opposed to creating an actual file hierarchy? Are there any drawbacks to having every single file server call redirected? To having the .htaccess file hold rewrite rules for every single alias?

  Read the article

• How can one find software development work that involves directly the final end user?

  - by RJa

  I've worked in software development for 15 years and, while there have been signficant personal achievements and a lot of experience, I've always felt detached from the man/woman-on-the-street, the every day person, how it affects their lives, in a number of ways: the technologies: embedded software, hidden away, stuff not seen by the everyday person. Or process technology supporting manufactured products the size of the systems, meaning many jobs, divided up, work is abstract, not one person can see the whole picture the organisations: large, with departments dealing with different areas, the software, the hardware, the marketing, the sales, the customer support the locations and hours: out-of-town business parks away from the rest of society, fixed locations, inflexible: 9-5 everyday This to me seems typical of the companies I worked for and see elsewhere. Granted, there are positives such as the technology itself and usually being among high calibre co-workers, but the above points frustrate me about the industry because they detach the work from its meaning. How can one: change these things in an existing job, or compensate for them? find other work that avoids these and connects with the final end user? Job designs tend to focus on the job content and technical requirements rather than how the job aims to fulfil end user needs, is meaningful.

  Read the article

• Need some critique on .NET/WCF SOA architecture plan

  - by user998101

  I am working on a refactoring of some services and would appreciate some critique on my general approach. I am working with three back-end data systems and need to expose an authenticated front-end API over http binding, JSON, and REST for internal apps as well as 3rd party integration. I've got a rough idea below that's a hybrid of what I have and where I intend to wind up. I intend to build guidance extensions to support this architecture so that devs can build this out quickly. Here's the current idea for our structure: Front-end WCF routing service (spread across multiple IIS servers via hardware load balancer) Load balancing of services behind routing is handled within routing service, probably round-robin One of the services will be a token Multiple bindings per-service exposed to address JSON, REST, and whatever else comes up later All in/out is handled via POCO DTOs Use unity to scan for what services are available and expose them The front-end services behind the routing service do nothing more than expose the API and do conversion of DTO<-Entity Unity inject service implementation to allow mocking automapper for DTO/Entity conversion Invoke WF services where response required immediately Queue to ESB for async WF -- ESB will invoke WF later Business logic WF layer Expose same api as front-end services Implement business logic Wrap transaction context where needed Call out to composite/atomic services Composite/Atomic Services Exposed as WCF One service per back-end system Standard atomic CRUD operations plus composite operations Supports transaction context The questions I have are: Are the separation of concerns outlined above beneficial? Current thought is each layer below is its own project, except the backend stuff, where each system gets one project. The project has a servicehost and all the services are under a services folder. Interfaces live in a separate project at each layer. DTO and Entities are in two separate projects under a shared folder. I am currently planning to build dedicated services for shared functionality such as logging and overload things like tracelistener to call those services. Is this a valid approach? Any other suggestions/comments?

  Read the article

• Which topics do I need to research to enable me to complete my self-assigned "Learning Project"?

  - by Anonymous -

  I want to continue learning C#. I've read parts of a few books recommended on here and the language is feeling more familiar by the day. I'd like to tackle a mid-sized personal project to take my expertise to the next level. What I'd like to do, is create an application that 'manages expenses', that runs on multiple machines on a LAN. So for example, say we have person1 and person2 on seperate machines running the application, when person1 enters an expense, it will appear on person2's (pretty UI) view of the expenses database and vice versa. What topics do I need to research to make this possible for me? I plan on learning WPF for the UI (though the steep learning curve (or so I'm told) has me a little anxious about that at this stage. With regards to the database, which database would you recommend I use? I don't want a 'server' for the database to run on, so do I need to use an embedded database that each client machine runs a copy of that updates to each other (upon startup/entering of expense on any machine etc)? What topics under networking should I be looking at? I haven't studied networking before in any language, so do I need to learn about sockets or?

  Read the article

• How to set individual NTFS partitions permissions behaviour for each user account?

  - by ryniek

  I have two NTFS partitions (DOWNLOADS for downloaded files and VM for my VirtualBox .vdi file) for which i must have full permissions for my allday use account. They should be also automounting when i login to this account. But i've also set Guest account for guests. For Guest account, i want make VM partition fully disabled and invisible (and thus it mustn't automount) but DOWNLOADS partition should be shared with limited privileges with Guest account. Editing fstab i'm able to share DOWNLOADS partition with Guest on limited privileges but VM can be only set to limited and have disabled automounting - so guest can't mount it but it still can be seen in Nautilus, plus I must always mount it manually when i login to allday account. Is there some trick to make what i want? Here's my fstab config: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sda1 : UUID=35e66658-5ee9-40cf-bf56-8204959e3df0 / xfs defaults 01 #Entry for /dev/sda2 : UUID=26c714cf-4236-45e7-9c46-cfcf91a215ae /home xfs defaults 02 #Entry for /dev/sda5 : UUID=1315BCB027C44639 /media/DOWNLOADS ntfs-3g auto,uid=1000,gid=1000,umask=0022,nodev,locale=pl_PL.utf8 0 0 #Entry for /dev/sda6 : UUID=60FF39EB72B72264 /media/VM ntfs noauto,uid=1000,gid=1000,umask=0077,nodev,locale=pl_PL.utf8 0 0 #Entry for /dev/sda7 : UUID=c52411f5-105c-45d1-971f-412f962c350e none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 Thanks

  Read the article

• Tomcat 7 vs. ehCache Standalone Server (Glassfish) Configuration with RESTful Web Services

  - by socal_javaguy

  My requirements consist of using ehCache to send and store data via RESTful web service calls. The data can be stored in-memory or via the filesystem... Never used ehCache before so I am having some issues deciding on which bundle to use. Have downloaded the following bundles: ehcache-2.6.2 ehcache-standalone-server-1.0.0 (1) What is the difference between the two? It seems the ehcache-2.6.2 contains src and binaries, which essentially enables one to bundle it with their webapps (by putting the compiled jar or binaries inside the webapp's WEB-INF/lib folder). But it doesn't seem that it has support for Restful web services. Whereas, ehcache-standalone-server-1.0.0 (comes with an embedded Glassfish server and has support for REST & SOAP) can be used to run as a standalone server. If I my answers to my own question are correct, then that means, I should just use the standalone server? (2) My requirements are to setup ehCache (with REST support) on Tomcat 7. So, how could I setup ehCache on Tomcat 7 as a separate app with REST & SOAP support? Thank you for taking the time to read this...

  Read the article

• Enjoy Cloud Odyssey The Oracle Movie

  - by Naresh Persaud

  If you attended Open World you may have seen the promotions for a new movie produced by Oracle. The movie is called Cloud Odyssey and it chronicles the journey of a hero to the cloud. The movie is an animated sci-fi adventure. This movie will be played at Oracle events around the world so you may soon get an invite to attend. Interesting approach to telling the cloud story. For many IT organizations, the journey to the cloud is a major initiative for end users. I am sure Homer would be proud. In fact perhaps if it is successful, I am hopeful we may see a cloud Iliad.  Below, I have embedded a trailer to the movie for your viewing pleasure. While it clearly is not the next Iron Man, it is intriguing. Hope you enjoy.  &amp;amp;amp;amp;amp;lt;span id=&amp;amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;amp;gt;

  Read the article

• Reliance on Outlook (been a looong time, I know)

  - by AndyScott

  Do you feel that your development group too reliant on Outlook? Have you reached a point that you have to search your email for pertinent information when asked? What are you using? I realized things had gotten out of hand a couple weeks ago over a weekend. I was at my in-laws house (in the country, no PC/laptop, no internet connection; and I get an email on my phone that I needed to reply to, but I couldn't send without deleting items from my inbox/sent items/etc. Now mind you, I have rules set up to move stuff into folders, and files more than a month old are automatically moved to the PST; but generally don't manually move items to a PST until I have had a chance to 'work' the item. Please don't bother mocking my process, it's just the way I work. That being said, it was a frustrating process of 'I need all this information, what can I afford to lose'. I work on an International project (think lots of customers), and conversations in 9 or 10 different directions about 10-20 different things are not abnormal for a given day. I have found myself looking data up in Outlook because that's where it is. I think that I have reached the point now, where I don't feel that Outlook is up to the task of organizing the data that it contains.   When you have that many emails (200 or so a day), information seems to get lost at times, and I find that Outlook's search capabilities are lacking. Additionally, I find that any sort of organizational 'system' of sorting emails that can cover multiple topics is a lost cause. But at the same time, the old process of taking the information that I got from emails and moving it into another 'notes' type of program has proved to be too time consuming. Anyone out there have some better type of system? (Comments about the capacity of my brain, and it's ability to recall information not needed.)

  Read the article

• Can't mount my USB Drive

  - by user996056

  ~> sudo mount /dev/sdb1 /media/Disk Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. I have a USB Hard Disk and Windows can't detect it. So I tried to open it up on Ubuntu using gparted. Gparted detects the NTFS partition, so everything seems to be fine (note, though, that the total size of the files in this disk is over 1 TB). I tried to mount it using: sudo mount /dev/sdb1 /media/Disk But I got: Did not find any restart pages in $LogFile and it was not empty. The file system wasn't safely closed on Windows. Fixing. Then, the process just sits there blinking. Any ideas on how to fix it? It's taking forever ( 10 minutes), should I wait or cancel it and do something else? Thank you in advance.

  Read the article

• Will Ubuntu work out on my mother's computer?

  - by PleaseStand

  My mother had an old Compaq desktop computer running Windows 98, which she used for occasional Web browsing and playing cards. Recently, a relative brought up a newer computer; it ran Windows XP. Unfortunately, the hard drive failed soon afterward, forcing me to reinstall the operating system. Not having the original Windows disc or product key led me to consider Ubuntu Linux. Will it work for mom? Is the hardware compatible? (Check the history of this question for the full specifications.) Would Ubuntu/Xubuntu suffice, or would I be better off buying a new copy of Windows? Is her card game (Hoyle Card Games 3) likely to run on Wine? I believe the minimum system requirement is Windows 95. Failing Wine compatibility, is running Windows 98 on VirtualBox an option on such an old computer? Are there any equally good card games for Linux? She plays mainly Bridge, Poker, and Solitaire. Is there any "Large Fonts" option for those with poor vision? Is it possible to use a serial mouse?

  Read the article

• "bug" in C++11 text by Stroustrup?

  - by Astara

  I found an apparent contradiction in the c++ text having to do with the result of the c_str() function operating on std:strings (in my copy, the definition and contradiction are on p1040). First it defines the c_str() function as something that produces a 'C-style' (zero-terminated) string, but later it talks about how a C++ c_str value can have embed a 'C'-style, end-of-string terminators (i.e. NUL's) embedded in the string (that is defined by being NUL terminated). Um... does anyone else feel that this is a 'stretching' of the definition of a C-string beyond it's definition? I.e. I think what it means, is that if you were to look at the length() function as applied to the string, it will show a different end of string than using the C-definition of a z-string -- one that can contain any character except NUL, and is terminated by NUL. I likely don't have to worry about it in my of my programs, but it seems like a subtle distinction that makes a C++ c_str, not really a 'C'-string. Am I misunderstanding this issue? Thanks!

  Read the article

• From the Coalface - 3 - Work as hard as you can to be as lazy as you can!

  - by TATWORTH

  The saga of the Change Log A recent conversation reminded me of the need for change logs within a database, to record when various change scripts were run. Creating such the required table is simple. A typical table for this consists of: Id - identity Integer primary key ChangeFileName - NVARCHAR(128) to hold the name of the file run. DateAdded - DateTime non-null with default value of getutcdate() Purpose - NVARCHAR(128) Rerunnable - Bit non-null default 0. By good design of the table only two data values normally need to be supplied. Two stored procedures, one for inserting data and one to list in reverse sequence the log complete the database essentials. The complete implementation can be found in the CommonData solution at http://CommonData.CodePlex.Com By including a call the add Change Log stored procedure, each script can log its name and purpose for posterity. The scripts that were applied to say the UAT system and their sequence of application can be readily identified for running on the Live system. Formatting XML XML is often produced as one continous string with no embedded CR/LF. To get it into human readable form, open it in visual studio, swap to another tab and back and click the format document button. The XML will then be nicely formatted!

  Read the article

• Fresh install of 12.04 using USB stick booted into tty1

  - by croc

  I just installed 12.04 Alternate for the first time to give it a try using a USB stick burned with UnetBootIn. It installed without a problem. But it booted into a tty1 console without booting into a GUI. After logging into the tty1 console, I typed unity. It appeared that the system doesn't have unity desktop. How can it be solved? My installation didn't show any error. Something worth mentioning: During installation, I had to choose an option saying 'customize the system to your needs' something like that I don't remember correctly with options 'SSH server','Mail Server', 'Ubuntu Desktop',.....,'Manual selection of packages' etc. I chose 'Ubuntu Desktop'. I haven't encountered something like this in 11.04. To do an installation of Alternate iso using UnetBootIn, i used '12.04_Hdmedia' option of that software and had to change file extension of .ude to .udeb in /pool/main/l/linux that i found in Alternate ubuntu cdrom detect to go around with the cdrom detection problem. I have a 945G intel graphics.

  Read the article

• Oracle regains the #1 UNIX Shipments Marketshare

  - by EricReid-Oracle

  Oracle has regained the #1 UNIX Server Shipments spot! According to IDC, Oracle’s share was 33.6%, up from 32.7% in the year ago period, and 32.2% in C4Q13:  IDC: WW Unix Unit Shipments, Share, Growth 2013Q1 Share 2013Q4 Share 2014Q1 Share Sequential Growth Y/Y Growth Oracle 10,141 32.7% 10,294 32.2% 8,355 33.6% -18.8% -17.6% IBM 10,203 32.9% 11,533 36.0% 6,919 27.8% -40.0% -32.2% HP 7,046 22.7% 6,786 21.2% 6,549 26.4% -3.5% -7.1% Fujitsu 1,174 3.8% 1,141 3.6% 1,069 4.3% -6.3% -8.9% Dell 565 1.8% 499 1.6% 519 2.1% 4.0% -8.2% NEC 69 0.2% 81 0.3% 63 0.3% -22.5% -9.4% Others 1,804 5.8% 1,684 5.3% 1,380 5.6% -18.1% -23.5% Total Market 31,002 100.0% 32,018 100.0% 24,854 100.0% -22.4% -19.8% While the UNIX server space is currently undergoing some contraction (on a pure numbers basis), this can be traced in part to an overall consolidation trend, due to the greatly-increased price-performance of our systems. Consider this: one SPARC T5-4 system has 1/16th the number of sockets and 1/192nd the number of cores of the previous high-end M9000-64 system -- all at 5X the price-performance. SPARC. Solaris. Nuff' said.

  Read the article

• Move entire OS from NTFS drive to bigger ext4 drive.

  - by pangel

  According to SMART data, the hard drive I curently use is about to fail. I bought a new, bigger drive to copy the system to a safer place. The old drive is 160GB. Ubuntu was installed with Wubi, and the partition is NTFS. There are a few other partitions around (recovery partition, swap...) that I don't care about. The new drive is 320GB. I would like the new system to run on ext4, not on NTFS. I looked at solutions that use dd, or clonezilla, but it seems that moving to a different filesystem prevents me from using them. I considered installing a brand new ubuntu on the new hard drive and then copy /home from the old drive to the new drive, but I heard that there would be file permission problems. I would also have to reinstall all my software. One last thing: the NTFS drive has dead sectors. I don't know how this can influence the copy process, but I mention it just in case. edit: I do not care about the windows partition. I just want Ubuntu to make the transition.

  Read the article

• Managing TFS Workspaces

  - by Enrique Lima

  You are the administrator (or since you may be the one that knows the most about it) and you need to do some cleanup on what is connected and perhaps even cleanup after people that have left the organization and left some code checked out in their workspace. What permissions do I need? You will need to have Administer Workspaces permission to perform the following tasks. The commands. In order to execute the commands, you will need to open a Visual Studio Command Prompt, once there you will be able to use the tf command.  This has a nice set of options, which I will be providing a listing for later on in another post. To list all workspaces registered: tf workspaces /collection:<url to your TPC> <workspace>;<owner> To delete a specific workspace: tf workspace /delete /server:<url to your TPC> <workspace>;<owner> If for any reason a workspace has embedded spaces, then surround that with “” (double quotes).

  Read the article

• Web-Service: How much would you charge? [closed]

  - by jacksbox

  I´ve to make an offer to a client who wants me to develope a web-service for him. I have some trouble calculating the pricing - can you help me? Here is a rough outline of the project: It´s a portal on which various artists and entertainers can register and administrate there profile (texts, gallerie, some embedded videos, choose categories and radius of offer, etc). Other user can browse the artists by 3-4 level categories and countries/staats. If someone wants to hire a artists, he can put them in an "shopping-basket" and can mail everyone in his basket. The Artists can answer them with a form on the website (he doesn't get the email of the other person). Users should be able to comment/rate the artists. But if an artists wants this comments/ratings visible on his profile he must pay, and after that, the admin of the site must activate this comments/ratings. So, no more information given, what would you charge (ca.)? Edit: It´ll be developed with php/codeigniter. A .psd design is already there.

  Read the article

• Lenovo ThinkPad W530 problem to activate the optical/DVD drive

  - by Marko Apfel

  Problem Sometimes my notebook shows the optical drive as power off: But the hint there is not changing this state. Solution By looking in the device manager you see the next problem: So open the properties via right mouse click. This gives you the hint to remove the drive first. “Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer. (Code 47)” Whether you select the comment by dragging the mouse over the the hidden part or pressing the button “Properties”. So we unplug and reinsert the ultrabay. If you think, now the system is working – you are wrong. Now the system is the meaning, that the ultrabay is unplugged. You could verify this by refresh the view in the device panel. Now there is no longer our device. Yet your great gig comes – unplug the ultra bay and reinsert it a second time! After this you could hear with a media inside, that the motor is really started and we have a working device What a difficult birth …

  Read the article

• Ubuntu 11.10 Random reboots how to find root cause?

  - by Indigo42

  All, This issue started with 11.04, I upgraded to 11.10 this week in hopes it would correct it, but after a few days it happened again.. A few times a day, randomly, my monitors will go black and the machine will come back in the post screen and boot up again. Sometimes it boots up properly, sometimes it boots to disk scan (I understand why...the machine just died with a bunch of stuff open) and sometimes it takes several cycles of this to come up. I connected to the system with my laptop and tailed dmesg, syslog, kern.log, and Xorg.0.log. I also ran a cat /proc/kmesg. Nothing is showing up in any of these log files when it happens..it's just like someone has pulled the plug. I just got through running 4 hours of the memory test with no errors. I have a AMD Phenom 9850 Quad-Core Processor and Nvida 9500GT graphics card. This system has been stable for like 4 years. I'm thinking it might be a hardware problem, but how do I find out? Thanks,

  Read the article

• SQL 2008/2005 Hosting :: Error - “Named Pipes Provider, error: 40 – Could not open a connection to SQL Server”

  - by mbridge

  When setting up a Microsoft Windows Server 2008 system, I went through the motions to set up IIS, MS SQL Server 2008, and Visual Studio 2010 to use as a test-bed. One of the immediate benefits of setting up such a system is that most development can be done remotely: MS SQL Server Management Studio, Visual Studio’s Web development suite, as well as file shares, remote desktop, etc, make for a great way to remotely develop in ‘pristine’ conditions. But there are drawbacks, too, such as needing to deal with firewall issues, not being able to penetrate past a router or the requirement of setting up a VPN. One of the problems I encountered when trying to remote into the MS SQL Server 2008 that I’d set up was the following error: Named Pipes Provider, error: 40 – Could not open a connection to SQL Server I followed the below steps, and was able to connect to the server after just a few moments of tinkering: 1. From the server in question, surf to this Microsoft article, and download and install the Firewall rules modification program. Never drop your firewall, even on a development machine, unless you have a really good reason to. 2. Launch SQL Server Configuration Manager. Navigate to SQL Server Network Configuration, then Protocols for your server name. Enable TCP/IP and Named Pipes by right-clicking and choosing Enable for each given Protocol Name. 3. Restart the SQL Server service from Services (or from command line, subsequently run “net stop mssqlserver” then “net start mssqlserver”. 4. Try your remote connection once more, and you should be able to connect. It’s not a terribly difficult concept, but one of the more challenging tasks developers face is dealing with environment setup. And while there is a certain blurred-line overlap between software development and server administration, sometimes the latter is daunting, especially given that you might set up only a handful of servers during your career.

  Read the article

• Extended service set help [closed]

  - by Cygnus X

  Sorry, this is going to be long and rambly. So, at home my network is set up as such: I have a "master router" that handles DHCP, from there I have a basic 5 port switch, and coming off that, I have a second router that I put in access point mode so that I could have better wireless coverage in my house. I cant seem to access it through a web browser since the master router kicked in and assigned it an ip address. But, i told you all that story, so that i could tell you this story. At the company I work for, they are trying to set up wireless cameras, according to the manual for these, in order to connect these cameras to our network, we need to get into the wireless router and associate the router with the cameras, but the problem is, the network is setup like my home network. Theres a "master router" which is a windows 2003 server, and then a wireless router in AP mode dishing out wireless access. I cant get into the router (by the way I'm not the system admin for the company, nor do i know jack squat about windows server , nor can I easily get in contact with the system admin. (quite the cluster f*k, eh?)) I've tried using wireshark to find the routers ip, dug through arp tables, tried plugging straight into the router, but I cant seem to get into the damn thing. Any ideas/suggestions would be greatly appreciated.

  Read the article

< Previous Page | 683 684 685 686 687 688 689 690 691 692 693 694  | Next Page >