Search Results

Search found 3151 results on 127 pages for 'samurai 01'.

Page 69/127 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

  • What happens when my domain provider cancels order after domain transfer?

    - by Saifur Rahman Mohsin
    I purchased 2 domains say xyz.in and abc.com on october 2012 and I got emails that they will be expiring on oct 2013. I called my local domain provider and told him I'd like to transfer the domain from Webiq to GoDaddy to which he said I cannot unless the domain is active. He asked me to pay for both the domains, renew it and then I could transfer the domain via the domain panel. When I went to the domain panel I noticed that the order was made and so I made a transfer which happened successfully. Just as he mentioned the period of validity (1 year) for each domain got transferred to GoDaddy as well! Additionally, I added 1 year of period to both the domain via GoDaddy so both of them and also GoDaddy provided an extra free year to both these domains as I paid for the transfer on 11/10/2013 at 9:18 PM MST so both of these were stated to be valid till 2016 and that's what it showed when I did a whois lookup as well. But now it suddenly shows me that my domains are getting expired this year (and the whois also shows 2015). This is confusing as I have no idea who to blame for the missing one year. I'm wondering what would have happened say if my old domain provider's client who got my domain registered cancelled the order. Since it was no longer under their control would they still be able to deduce that one year? When I tried submitting a support request to Webiq they replied: Your domain "abc.com" has been transferred away from us on 17-11-2013 and the domain "xyz.in" was transferred away from us on 18-01-2014. There are no order cancellation actions placed. If you have any billing related issues kindly contact your parent reseller. I need some guidance on explaining what issue might have occurred or understanding how this domain control works!

    Read the article

  • Fix corrupt NTFS partition without Windows

    - by Capt.Nemo
    MY NTFS Partition has gotten corrupt somehow (it's a relic from the days when I had Windows installed). I'm putting the debug output of fdisk and blkid here. At the same time, any OS is unable to mount my root partition, which is located next to my NTFS partition. I'm not sure if this has anything to do with it, though. I get the following error while trying to mount my root partition (sda5) mount: wrong fs type, bad option, bad superblock on /dev/sda5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so ubuntu@ubuntu:~$ dmesg | tail [ 1019.726530] Descriptor sense data with sense descriptors (in hex): [ 1019.726533] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 1019.726551] 1a 3e ed 92 [ 1019.726558] sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed [ 1019.726568] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 1a 3e ed 40 00 01 00 00 [ 1019.726584] end_request: I/O error, dev sda, sector 440331666 [ 1019.726602] JBD: Failed to read block at offset 462 [ 1019.726609] ata1: EH complete [ 1019.726612] JBD: recovery failed [ 1019.726617] EXT4-fs (sda5): error loading journal When I open gparted (using live CD), I get an exclamation next to my NTFS drive which states Is there a way to run chkdsk without using windows ? My attempt to run fsck results in the following : ubuntu@ubuntu:~$ sudo fsck /dev/sda fsck from util-linux-ng 2.17.2 e2fsck 1.41.14 (22-Dec-2010) fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sda The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Update : I was able to fix the NTFS partition running chkdsk off HBCD, but it seems that the superblock problem still remains. *Update 2: * Fixed superblock issue using e2fsck -c /dev/sda5

    Read the article

  • Wake On Lan (WOL) for Realtek RTL8101E/RTL8102E

    - by Heisennberg
    I'm unsuccessfully trying to get Wake on Lan to work with my local server (IP Address : 192.168.0.2, distro Ubuntu 12.04.3 LTS) which has a Realtek RTL8101E/RTL8102E ethernet card. The computer sending the WOL is a Macbook Pro which is connected on the same network. Yet the server fails to start. Here what I have done so far : name@serverName ~ $ cat /proc/acpi/wakeup Device S-state Status Sysfs node HDEF S3 *disabled pci:0000:00:1b.0 PXSX S3 *disabled PXSX S0 *enabled pci:0000:04:00.0 PXSX S0 *disabled USB1 S3 *enabled pci:0000:00:1d.0 USB2 S3 *enabled pci:0000:00:1d.1 USB3 S3 *enabled pci:0000:00:1d.2 USB5 S3 *enabled pci:0000:00:1a.1 EHC1 S3 *enabled pci:0000:00:1d.7 EHC2 S3 *enabled pci:0000:00:1a.7 name@serverName ~ $ lspci ------ 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01) ------ name@serverName ~ $ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Link partner advertised pause frame use: Symmetric Receive-only Link partner advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) drv probe ifdown ifup Link detected: yes and I'm calling the WOL with : name@serverName ~ $ wakeonlan xx:xx:xx:xx:xx` Sending magic packet to 255.255.255.255:9 with xx:xx:xx:xx:xx I have succesfully activated the WOL option in my computer BIOS. Any idea ?

    Read the article

  • hp pavilion g6 1250 wireless problems

    - by Ahmed Kotb
    i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation , ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) there are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • Broadcom 4312 wireless not working on an HP dv6-1245 DX

    - by vitalie
    I have installed Ubuntu 10.04 on my HP dv6-1245 dx notebook and I do not have any wifi (it worked perfectly in windows vista and 7). I have followed a lot of instructions found on net but still not able to get Internet. Here is the outcome of lspci: $ sudo lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03) 02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) I have used ndiswrapper and have installed it, as well as the windows drivers for Broadcom, no change.

    Read the article

  • "wrong fs type, bad option, bad superblock" error while mounting FAT Drives

    - by cshubhamrao
    I am unable to mount any fat32 or fat16 formatted usb disks under Ubuntu 13.10. The thing here to note is that it is happening only with fat formatted Disks. ntfs, ext formatted external usb disks work well (I tried formatting the same with ext4 and it worked) While mounting via nautilus: Error while mounting from terminal: root@shubham-pc:~# mount -t vfat /dev/sdc1 /media/shubham/n mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so As suggested by the error: Output from dmesg | tail root@shubham-pc:~# dmesg | tail [ 3545.482598] scsi8 : usb-storage 1-1:1.0 [ 3546.481530] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 1.26 PQ: 0 ANSI: 5 [ 3546.482373] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 3546.483758] sd 8:0:0:0: [sdc] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 3546.485254] sd 8:0:0:0: [sdc] Write Protect is off [ 3546.485262] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 3546.488314] sd 8:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3546.499820] sdc: sdc1 [ 3546.503388] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 3547.273396] FAT-fs (sdc1): IO charset iso8859-1 not found Output from fsck.vfat: root@shubham-pc:~# fsck.vfat /dev/sdc1 dosfsck 3.0.16, 01 Mar 2013, FAT32, LFN /dev/sdc1: 1 files, 1/1949978 clusters All normal Tried re-creating the whole partition table and then formatting as fat32 but to no avail so the possibility of corrupted drive is ruled out. Tried the same with around 4 Disks or so and all have the same things

    Read the article

  • C-panel mail goes into spam instead of inbox in gmail

    - by Robin Jain
    I have c-panel vps server. I have created a domain on the same server, but when I send mail through webmail to gmail email id it goes into the spam folder. Note--->Mail ip note blacklisted Spf records enable DKIM enable reverse dns are perfect ====================================================================== Email header Information: Delivered-To: [email protected] Received: by 10.143.93.13 with SMTP id v13csp119806wfl; Fri, 6 Jul 2012 08:01:36 -0700 (PDT) Received: by 10.182.52.42 with SMTP id q10mr26133912obo.46.1341586895571; Fri, 06 Jul 2012 08:01:35 -0700 (PDT) Return-Path: <[email protected]> Received: from lakshyacs-u.securehostdns.com ([50.97.147.134]) by mx.google.com with ESMTPS id fx3si18028369obc.144.2012.07.06.08.01.35 (version=TLSv1/SSLv3 cipher=OTHER); Fri, 06 Jul 2012 08:01:35 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 50.97.147.134 as permitted sender) client-ip=50.97.147.134; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 50.97.147.134 as permitted sender) [email protected] Received: from localhost.localdomain ([127.0.0.1]:39016 helo=harishjoshico.com) by lakshyacs-u.securehostdns.com with esmtpa (Exim 4.77) (envelope-from <[email protected]>) id 1SnA2J-0006Nq-05 for [email protected]; Fri, 06 Jul 2012 20:31:35 +0530 Received: from 223.189.14.213 ([223.189.14.213]) (SquirrelMail authenticated user [email protected]) by harishjoshico.com with HTTP; Fri, 6 Jul 2012 20:31:35 +0530 Message-ID: <[email protected]> Date: Fri, 6 Jul 2012 20:31:35 +0530 Subject: ggglkhl From: [email protected] To: [email protected] User-Agent: SquirrelMail/1.4.22 MIME-Version: 1.0 Content-Type: text/plain;charset=iso-8859-1 Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) Importance: Normal X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - lakshyacs-u.securehostdns.com X-AntiAbuse: Original Domain - gmail.com X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - harishjoshico.com jhkhl ================================================================

    Read the article

  • Atheros wireless not working

    - by Chandru1
    I have been struggling hard since i have installed Ubuntu 10.10 but it has been difficult for me to get my wifi working. So here is what i tried. First i checked whether i have the driver using the ifconfig command and it shows the wireless lan driver as wlan0. Next, i tried the command iwlist wlan0 scanning by becoming the root which gave me the output as no scan results. Next, i visited this link https://help.ubuntu.com/community/WifiDocs/Driver/Atheros to see as to what problem my laptop may have. I do own have an ath5k chipset. And as i followed the instructions in the above link in one of the blacklist-ath_pci.conf file had this written in it. For some Atheros 5K RF MACs, the madwifi driver loads buts fails to correctly initialize the hardware, leaving it in a state from which ath5k cannot recover. To prevent this condition, stop madwifi from loading by default. Use Jockey to select one driver or the other. (Ubuntu: #315056, #323830 I am not that good at Linux but i have given it a try. I am desperate to have my wifi working and i would be glad if this community could help. ADDED: If anyone would like to know as to what drivers i am using this is the output. network description: Wireless interface product: AR2413 802.11bg NIC vendor: Atheros Communications Inc. physical id: 3 bus info: pci@0000:0a:03.0 logical name: wlan0 version: 01 serial: 00:19:7d:d3:0c:fd width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath5k driverversion=2.6.35-24-generic firmware=N/A latency=168 link=no maxlatency=28 mingnt=10 multicast=yes wireless=IEEE 802.11bg resources: irq:18 memory:d0000000-d000ffff Some more information and output as to what i have done. lsmod | grep ath ath5k 130083 0 mac80211 231541 1 ath5k ath 8153 1 ath5k cfg80211 144470 3 ath5k,mac80211,ath led_class 2633 1 ath5k

    Read the article

  • CodePlex Daily Summary for Monday, November 04, 2013

    CodePlex Daily Summary for Monday, November 04, 2013Popular ReleasesDNN Blog: 06.00.01: 06.00.01 ReleaseThis is the first bugfix release of the new v6 blog module. These are the changes: Added some robustness in v5-v6 scripts to cater for some rare upgrade scenarios Changed the name of the module definition to avoid clash with Evoq Social Addition of sitemap providerStock Track: Version 1.2 Stable: Overhaul and re-think of the user interface in normal mode. Added stock history view in normal mode. Allows user to enter orders in normal mode. Allow advanced user to run database queries within the program. Improved sales statistics feature, able to calculate against a single category.VG-Ripper & PG-Ripper: VG-Ripper 2.9.50: changes NEW: Added Support for "ImageHostHQ.com" links NEW: Added Support for "ImgMoney.net" links NEW: Added Support for "ImgSavy.com" links NEW: Added Support for "PixTreat.com" links Bug fixesVidCoder: 1.5.11 Beta: Added Encode Details window. Exposes elapsed time, ETA, current and average FPS, running file size, current pass and pass progress. Open it by going to Windows -> Encode Details while an encode is running. Subtitle dialog now disables the "Burn In" checkbox when it's either unavailable or it's the only option. It also disables the "Forced Only" when the subtitle type doesn't support the "Forced" flag. Updated HandBrake core to SVN 5872. Fixed crash in the preview window when a source fil...Wsus Package Publisher: Release v1.3.1311.02: Add three new Actions in Custom Updates : Work with Files (Copy, Delete, Rename), Work with Folders (Add, Delete, Rename) and Work with Registry Keys (Add, Delete, Rename). Fix a bug, where after resigning an update, the display is not refresh. Modify the way WPP sort rows in 'Updates Detail Viewer' and 'Computer List Viewer' so that dates are correctly sorted. Add a Tab in the settings form to set Proxy settings when WPP needs to go on Internet. Fix a bug where 'Manage Catalogs Subsc...uComponents: uComponents v6.0.0: This release of uComponents will compile against and support the new API in Umbraco v6.1.0. What's new in uComponents v6.0.0? New DataTypesImage Point XML DropDownList XPath Templatable List New features / Resolved issuesThe following workitems have been implemented and/or resolved: 14781 14805 14808 14818 14854 14827 14868 14859 14790 14853 14790 DataType Grid 14788 14810 14873 14833 14864 14855 / 14860 14816 14823 Drag & Drop support for rows Su...SharePoint 2013 Global Metadata Navigation: SP 2013 Metadata Navigation Sandbox Solution: SharePoint 2013 Global Metadata Navigation sandbox solution version 1.0. Upload to your site collection solution store and activate. See the Documentation tab for detailed instructions.SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.1: New FeaturesAdded option Limit to current basket subtotal to HadSpentAmount discount rule Items in product lists can be labelled as NEW for a configurable period of time Product templates can optionally display a discount sign when discounts were applied Added the ability to set multiple favicons depending on stores and/or themes Plugin management: multiple plugins can now be (un)installed in one go Added a field for the HTML body id to store entity (Developer) New property 'Extra...CodeGen Code Generator: CodeGen 4.3.2: Changes in this release include: Removed old tag tokens from several example templates. Fixed a bug which was causing the default author and company names not to be picked up from the registry under .NET. Added several additional tag loop expressions: <IF FIRST_TAG>, <IF LAST_TAG>, <IF MULTIPLE_TAGS> and<IF SINGLE_TAG>. Upgraded to Synergy/DE 10.1.1b, Visual Studio 2013 and Installshield Limited Edition 2013.Dynamics CRM 2013 Easy Solution Importer: Dynamics CRM 2013 Easy Solution Importer 1.0.0.0: First Version of Easy Solution Importer contains: - Entity to handle solutions - PBL to deactivate fields in form - Business Process Flow to launch the Solution Import - Plugin to import solutions - ChartSQL Power Doc: Version 1.0.2.2 BETA 1: Fixes for issues introduced with PowerShell 4.0 with serialization/deserialization. Fixed an issue with the max length of an Excel cell being exceeded by AD groups with a large number of members.Community Forums NNTP bridge: Community Forums NNTP Bridge V54 (LiveConnect): This is the first release which can be used with the new LiveConnect authentication. Fixes the problem that the authentication will not work after 1 hour. Also a logfile will now be stored in "%AppData%\Community\CommunityForumsNNTPServer". If you have any problems please feel free to sent me the file "LogFile.txt".AutoAudit: AutoAudit 3.20f: Here is a high level list of the things I have changed between AutoAudit 2.00h and 3.20f ... Note: 3.20f corrects a minor bug found in 3.20e in the _RowHistory UDF when using column names with spaces. 1. AutoAudit has been tested on SQL Server 2005, 2008, 2008R2 and 2012. 2. Added the capability for AutoAudit to handle primary keys with up to 5 columns. 3. Added the capability for AutoAudit to save changes for a subset of the columns in a table. 4. Normalized the Audit table and created...Aricie - Friendlier Url Provider: Aricie - Friendlier Url Provider Version 2.5.3: This is mainly a maintenance release to stabilize the new Url Group paradigm. As usual, don't forget to install the Aricie - Shared extension first Highlights Fixed: UI bugs Min Requirements: .Net 3.5+ DotNetNuke 4.8.1+ Aricie - Shared 1.7.7+Aricie Shared: Aricie.Shared Version 1.7.7: This is mainly a maintenance version. Fixes in Property Editor: list import/export Min Requirements: DotNetNuke 4.8.1+ .Net 3.5+WPF Extended DataGrid: WPF Extended DataGrid 2.0.0.9 binaries: Fixed issue with ICollectionView containg null values (AutoFilter issue)SuperSocket, an extensible socket server framework: SuperSocket 1.6 stable: Changes included in this release: Process level isolation SuperSocket ServerManager (include server and client) Connect to client from server side initiatively Client certificate validation New configuration attributes "textEncoding", "defaultCulture", and "storeLocation" (certificate node) Many bug fixes http://docs.supersocket.net/v1-6/en-US/New-Features-and-Breaking-ChangesBarbaTunnel: BarbaTunnel 8.1: Check Version History for more information about this release.NAudio: NAudio 1.7: full release notes available at http://mark-dot-net.blogspot.co.uk/2013/10/naudio-17-release-notes.htmlDirectX Tool Kit: October 2013: October 28, 2013 Updated for Visual Studio 2013 and Windows 8.1 SDK RTM Added DGSLEffect, DGSLEffectFactory, VertexPositionNormalTangentColorTexture, and VertexPositionNormalTangentColorTextureSkinning Model loading and effect factories support loading skinned models MakeSpriteFont now has a smooth vs. sharp antialiasing option: /sharp Model loading from CMOs now handles UV transforms for texture coordinates A number of small fixes for EffectFactory Minor code and project cleanup ...New ProjectsActive Directory User Home Directory and Home Drive Management: The script is great for migrations and overall user management. Questions please send an email to delagardecodeplex@hotmail.com.Computational Mathematics in TSQL: Combinatorial mathematics is easily expressed with computational assistance. The SQL Server engine is the canvas.Demo3: this is a demoEraDeiFessi: Un parser per un certo sito molto pesante e scomodo da navigareFinditbyme Local Search: Multi-lingual search engine that can index entities with multiple attributes.MVC Demo Project - 6: Demo project showing how to use partial views inside an ASP.NET MVC application.OLM to PST Converters: An Ideal Approach for Mac Users: OLM to PST converter helps you to access MAC Outlook emails with Windows platformOpen Source Grow Pack Ship: The Open Source Grow Pack Ship system is for the produce industry. It will allow companies with low funds and infrastructure to operate inside their own budget.Pauli: Pauli is a small .NET based password manager for home use. The Software helps a user to organize passwords, PIN codes, login accounts and notes.Refraction: Member element sorting. Contains reusable Visual Studio Extensibility code in the 'CodeManifold' project.Sensarium Cybernetic Art: Sensarium Cybernetic Art will use Kinect and brainwave technologies to create a true cybernetic art system. SharePoint - Tetris WebPart: Tetris webpart for SharePoint 2013Software Product Licensing: Dot License is very easy for your software product licensing. Product activation based on AES encryption, Processor ID and a single GUID key.VBS Class Framework: The 'VBS Class Framework' is an experimental project whcih aims at delivering 'Visual Basic Script Classes' for some commonly used Objects / Components (COM).VisualME7Logger: Graphical tools for logging real time performance statistics from VW and Audi automobilesVM Role Authoring Tool: VM ROLE Authoring Tool is used to author consistent VM Role gallery workloads for Windows Azure Pack and Windows Azure. wallet: Wallet Windows 8 Store Application: Windows 8 Store Application with XAML and C#Windows Azure Cache Extension Library: Windows Azure Cache Extension LibraryWindows Firewall Notifier: Windows Firewall Notifier (WFN) extends the default Windows embedded firewall behavior, allowing to visualize and handle incoming or outgoing connections.

    Read the article

  • Ubuntu 12.04.2 won't boot after bumblebee instalation

    - by Andrej
    First of all sorry for my English, it's not my first language. Here is what I have done: I had a working ubuntu 12.04 with all updates and working bumblebee, so I could do optirun command and battery life was better than without bumblebee. Than I decided to reinstall both my systems installed windows 7 and ubuntu. Reinstalled Windows 7 all working as expected, than on other partition installed ubuntu 12.04. All worked perfectly. Than I installed bumblebee according to the procedure written here https://wiki.ubuntu.com/Bumblebee same steps that I used before. But now after I install drivers and do all written in procedure and I reboot my notebook system won't boot, it is simply stuck at black screen after short showing of start screen. I reinstalled ubuntu many times already and tried everthing, but when I try install nvidia drivers it won't boot after shutting down notebook and only thing I can do is reinstalling system. I have Lenovo Thinkpad Edge E530 and processor: Intel® Core™ i5-3210M CPU and graphic cards are Intel HD 4000 and Nvidia geforce gt630m After clean install without bumblebee, terminal command lspci| grep VGA is showing: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) Can you suggest a sollution?? Or at least some links to similar topics??

    Read the article

  • CodePlex Daily Summary for Tuesday, November 05, 2013

    CodePlex Daily Summary for Tuesday, November 05, 2013Popular ReleasesSocial Network Importer for NodeXL: SocialNetImporter(v.1.9.1): This new version includes: - Include me option is back - Fixed the login bug reported latelyCaptcha MVC: Captcha MVC 2.5: v 2.5: Added support for MVC 5. The DefaultCaptchaManager is no longer throws an error if the captcha values was entered incorrectly. Minor changes. v 2.4.1: Fixed issues with deleting incorrect values of the captcha token in the SessionStorageProvider. This could lead to a situation when the captcha was not working with the SessionStorageProvider. Minor changes. v 2.4: Changed the IIntelligencePolicy interface, added ICaptchaManager as parameter for all methods. Improved font size ...DNN Blog: 06.00.01: 06.00.01 ReleaseThis is the first bugfix release of the new v6 blog module. These are the changes: Added some robustness in v5-v6 scripts to cater for some rare upgrade scenarios Changed the name of the module definition to avoid clash with Evoq Social Addition of sitemap providerStock Track: Version 1.2 Stable: Overhaul and re-think of the user interface in normal mode. Added stock history view in normal mode. Allows user to enter orders in normal mode. Allow advanced user to run database queries within the program. Improved sales statistics feature, able to calculate against a single category. Updated database script file. Now compatible with lower version of SQL Server.VG-Ripper & PG-Ripper: VG-Ripper 2.9.50: changes NEW: Added Support for "ImageHostHQ.com" links NEW: Added Support for "ImgMoney.net" links NEW: Added Support for "ImgSavy.com" links NEW: Added Support for "PixTreat.com" links Bug fixesVidCoder: 1.5.11 Beta: Added Encode Details window. Exposes elapsed time, ETA, current and average FPS, running file size, current pass and pass progress. Open it by going to Windows -> Encode Details while an encode is running. Subtitle dialog now disables the "Burn In" checkbox when it's either unavailable or it's the only option. It also disables the "Forced Only" when the subtitle type doesn't support the "Forced" flag. Updated HandBrake core to SVN 5872. Fixed crash in the preview window when a source fil...Wsus Package Publisher: Release v1.3.1311.02: Add three new Actions in Custom Updates : Work with Files (Copy, Delete, Rename), Work with Folders (Add, Delete, Rename) and Work with Registry Keys (Add, Delete, Rename). Fix a bug, where after resigning an update, the display is not refresh. Modify the way WPP sort rows in 'Updates Detail Viewer' and 'Computer List Viewer' so that dates are correctly sorted. Add a Tab in the settings form to set Proxy settings when WPP needs to go on Internet. Fix a bug where 'Manage Catalogs Subsc...uComponents: uComponents v6.0.0: This release of uComponents will compile against and support the new API in Umbraco v6.1.0. What's new in uComponents v6.0.0? New DataTypesImage Point XML DropDownList XPath Templatable List New features / Resolved issuesThe following workitems have been implemented and/or resolved: 14781 14805 14808 14818 14854 14827 14868 14859 14790 14853 14790 DataType Grid 14788 14810 14873 14833 14864 14855 / 14860 14816 14823 Drag & Drop support for rows Su...SharePoint 2013 Global Metadata Navigation: SP 2013 Metadata Navigation Sandbox Solution: SharePoint 2013 Global Metadata Navigation sandbox solution version 1.0. Upload to your site collection solution store and activate. See the Documentation tab for detailed instructions.SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.1: New FeaturesAdded option Limit to current basket subtotal to HadSpentAmount discount rule Items in product lists can be labelled as NEW for a configurable period of time Product templates can optionally display a discount sign when discounts were applied Added the ability to set multiple favicons depending on stores and/or themes Plugin management: multiple plugins can now be (un)installed in one go Added a field for the HTML body id to store entity (Developer) New property 'Extra...CodeGen Code Generator: CodeGen 4.3.2: Changes in this release include: Removed old tag tokens from several example templates. Fixed a bug which was causing the default author and company names not to be picked up from the registry under .NET. Added several additional tag loop expressions: <IF FIRST_TAG>, <IF LAST_TAG>, <IF MULTIPLE_TAGS> and<IF SINGLE_TAG>. Upgraded to Synergy/DE 10.1.1b, Visual Studio 2013 and Installshield Limited Edition 2013.SQL Power Doc: Version 1.0.2.2 BETA 1: Fixes for issues introduced with PowerShell 4.0 with serialization/deserialization. Fixed an issue with the max length of an Excel cell being exceeded by AD groups with a large number of members.Community Forums NNTP bridge: Community Forums NNTP Bridge V54 (LiveConnect): This is the first release which can be used with the new LiveConnect authentication. Fixes the problem that the authentication will not work after 1 hour. Also a logfile will now be stored in "%AppData%\Community\CommunityForumsNNTPServer". If you have any problems please feel free to sent me the file "LogFile.txt".AutoAudit: AutoAudit 3.20f: Here is a high level list of the things I have changed between AutoAudit 2.00h and 3.20f ... Note: 3.20f corrects a minor bug found in 3.20e in the _RowHistory UDF when using column names with spaces. 1. AutoAudit has been tested on SQL Server 2005, 2008, 2008R2 and 2012. 2. Added the capability for AutoAudit to handle primary keys with up to 5 columns. 3. Added the capability for AutoAudit to save changes for a subset of the columns in a table. 4. Normalized the Audit table and created...Aricie - Friendlier Url Provider: Aricie - Friendlier Url Provider Version 2.5.3: This is mainly a maintenance release to stabilize the new Url Group paradigm. As usual, don't forget to install the Aricie - Shared extension first Highlights Fixed: UI bugs Min Requirements: .Net 3.5+ DotNetNuke 4.8.1+ Aricie - Shared 1.7.7+Aricie Shared: Aricie.Shared Version 1.7.7: This is mainly a maintenance version. Fixes in Property Editor: list import/export Min Requirements: DotNetNuke 4.8.1+ .Net 3.5+WPF Extended DataGrid: WPF Extended DataGrid 2.0.0.9 binaries: Fixed issue with ICollectionView containg null values (AutoFilter issue)Community TFS Build Extensions: October 2013: The October 2013 release contains Scripts - a new addition to our delivery. These are a growing library of PowerShell scripts to use with VS2013. See our documentation for more on scripting. VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 Community TFS Build Manager VS2013 The Community TFS Build Managers for VS2010, 2012 and 2013 can also be found in the Visual Studio Gallery where upda...SuperSocket, an extensible socket server framework: SuperSocket 1.6 stable: Changes included in this release: Process level isolation SuperSocket ServerManager (include server and client) Connect to client from server side initiatively Client certificate validation New configuration attributes "textEncoding", "defaultCulture", and "storeLocation" (certificate node) Many bug fixes http://docs.supersocket.net/v1-6/en-US/New-Features-and-Breaking-ChangesBarbaTunnel: BarbaTunnel 8.1: Check Version History for more information about this release.New ProjectsAForge.NET FFmpeg - LGPL Version: AForge.Video.FFMPEG recompiled under LGPLv3 which can be distributed with proprietary projects, without requiring you to release all of your proprietary source.Albatross Shell: Albatross Shell is a WPF based Shell program that can host other WPF application modules.Analysis Services ServerActivity Monitor (ASSAM) 2014: Analysis Services Server Activity Monitor (ASSAM 2014) is an upgraded version of the Analysis Services Activity Monitor 2012.AsuraCode: AsuraCode 0.1Chimera - Automated Testing Suite: Chimera is an automated testing suite, intended to simplify and automate system and tests deployment. Oriented around the MVC architecture, it has web based UI.Create Sitemap for your Website (Sitemap Writer): Sitemap Writer help create sitemap for your website. It recursively look for links on your each page and add up in list to write a site map. DataSync: ????HCS Analyzer: HCS Analyzerk? toán thu? dona: chuong trình k? toán thu? donaLanguage improver: startedOrchard Abstractions: An Orchard module for providing higher-level abstractions to Orchard services.Orchard Abstractions - Examples: Examples for Orchard Abstractions (https://orchardabstractions.codeplex.com/)Role Based Views in Microsoft Dynamics CRM 2011: This tool will allow you to configure visibility and setting the default view of a logged in user based on security roles.SF.DotNet.Utilities: DotNet.UtilitiesShot: A real time C# web application framework designed in the image of ASP.NET.Soccer Managment System: Soccer Management SystemSTAR FOX XNA: Remake of a classic videogame. In this case, that videogame will be Star Fox (1993) for SNES game console.The Dargon Project: DargonTweetFeed: A small widget that enables you to display a twitter search or profile on your Sitecore siteWPF Themes HighRobotics: WPF Themes by High Robotics company????????? ????????: ?????????, ??????????? ?????????? ???????? ????????: ??????????? ????? ????? ??????????, ?????????? ????????? ??????.

    Read the article

  • How do I make my USB Bluetooth dongle work in Ubuntu 11.04 ? (Can't init device hci0: Connection timed out (110)) [closed]

    - by MaikoID
    I've a USB bluetooth dongle root@maiko-cce-lin:~# lsusb | grep Bluetooth Bus 001 Device 007: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) that isn't working properly, hardly-ever it works but stops working in my next reboot. what I've tried it isn't software blocked root@maiko-cce-lin:~# rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no my device is recognized by hciconfig root@maiko-cce-lin:~# hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1F:81:00:01:1C ACL MTU: 1021:4 SCO MTU: 180:1 DOWN RX bytes:330 acl:0 sco:0 events:8 errors:0 TX bytes:24 acl:0 sco:0 commands:30 errors:22 Features: 0xff 0x3e 0x09 0x76 0x80 0x01 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT but I can't turn on my hci interface root@maiko-cce-lin:~# hciconfig hci up Can't init device hci0: Connection timed out (110) I don't understand why.. the hcitool command doesn't show any device. root@maiko-cce-lin:~# hcitool dev Devices: I've tried to restart my bluetooth service too with this command and make all these previous commands again but without success. root@maiko-cce-lin:~# service bluetooth restart * Stopping bluetooth [ OK ] * Starting bluetooth [ OK ] root@maiko-cce-lin:~# The dongle works if you disconnect it from usb, wait a few seconds and connect it again. so there must be better solution for it ( a solution not involving physically removing the dongle!)

    Read the article

  • Screen becomes black after pressing dash or alt-tab

    - by cegerxwin
    I did an upgrade from 11.04 to 11.10. Unity 3d becomes a black screen after pressing the dash-button or after pressing alt-tab to switch between open windows. I can see the panel on the top(lock,sound,..) and the panel on the left (launcher) but the rest is black. It looks like a maximised black window. The open Windows are active but I cant see them. I logout by pressing logout in the right top corner and pressing enter (because logout is default focused on the dialogue screen) and leave unity3d. Unity3d worked with 11.04 very good. If I press the dash button the dash looks like an 16-Bit or 8-Bit window and buttons for maximise, minimise and close are displayed and looks inverted. I have rebooted my notebook just now and log in to Unity 3D and tested some features of Unity and everything works well. The black thing is only a layer. I can use my desktop but cant see anything because of the layer, but everything works. It seems so, that a layer appear when pressing dash or alt-tab and does not disappear when close dash or choose a running app with alt-tab. you will see the necessary info related video problems: Unity support: /usr/lib/nux/unity_support_test -p OpenGL vendor string: X.Org R300 Project OpenGL renderer string: Gallium 0.4 on ATI RC410 OpenGL version string: 2.1 Mesa 7.11-devel Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes xorg glxinfo lspci -nn | grep VGA 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62]

    Read the article

  • KDE not loading without nomode tag in grub and bad resolution [migrated]

    - by fcole90
    I recently installed Linux Mint 13 KDE but it's not working fine. At first I had to use failsafe mode to boot because normal boot takes to a textual login. If I use normal boot and text login I'm not able to run KDE nor with kdm start neither with startx. kdm says that's already running. Instead X is not able to run because can't connect Xserver to display. If I stop kdm and starx again doesn't change anything. Now I edited the grub to load in nomode. In that way KDE loads but resolution is wrong and xrandr doesn't help, because if I do this: cvt 1366 768 it changes it to 1368: # 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz Modeline "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync I also installed bumblebee and nvidia drivers because of optimus technology.. It worked just to have fun with glxspheres but there isn't any gain on KDE.. This is lspci output: fabio@fabio-EasyNote-TS11HR ~ $ lspci |grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff My notebook is an EasyNote TS with NVIDIA GeForce GT 540M. Thank you in advance to anyone that may help!

    Read the article

  • How to setup HDMI output on m11x with Nvidia GeForce GT 540M? (Bumblebee) Help?

    - by Alexander Tritan
    I have an Alienware m11x with Optimus Technology. I setup (Fresh Install) Ubuntu 12.04 with bumblebee as below. Please help me set up the HDMI output so that I can connect it to my monitor. $ uname -a Linux ubuntu 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux $ lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) $ dpkg --get-selections bumblebee install bumblebee-nvidia install $ bumblebeed -version bumblebeed --version bumblebeed (Bumblebee) 3.0 Copyright (C) 2011 The Bumblebee Project Should xrandr normally show HDMI? $ xrandr -q Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) $ cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nvidia Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nouveau Section "ServerLayout" Identifier "Layout0" Screen "Screen0" Option "AutoAddDevices" "true" EndSection Section "Device" Identifier "Device0" Driver "nouveau" EndSection Section "Screen" Identifier "Screen0" Device "Device0" EndSection and finally the biggest config file below: $cat /etc/bumblebee/bumblebee.conf [bumblebeed] VirtualDisplay=:8 KeepUnusedXServer=true ServerGroup=bumblebee TurnCardOffAtExit=false NoEcoModeOverride=false Driver= [optirun] VGLTransport=proxy AllowFallbackToIGC=false PMMethod=none [driver-nvidia] KernelDriver=nvidia-current Module=nvidia PMMethod=none LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia [driver-nouveau] KernelDriver=nouveau PMMethod=none XorgConfFile=/etc/bumblebee/xorg.conf.nouveau Any ideas on setting up the Optimus to output to the HDMI T.V.? I want to enable my HDMI with my GeForce GT 540M.

    Read the article

  • Internet is not working in base machine

    - by surendar
    I have a Ubuntu desktop. I am running a virtual windows machine using virtual box. Few days before Internet is not working in Ubuntu but it is working in the virtual machine. Even the samba shares are also accessible. I don't know why internet is not working in the base machine. I have tried to ping google.com, but it returns Ubuntu@desktop:~$ ping google.com ping: unknown host google.com ifconfig command's output Ubuntu@desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:27:0e:1b:86:2a inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::227:eff:fe1b:862a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:38221 errors:0 dropped:0 overruns:0 frame:0 TX packets:28161 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:39144616 (39.1 MB) TX bytes:6143919 (6.1 MB) Interrupt:27 Base address:0x2000 eth0:0 Link encap:Ethernet HWaddr 00:27:0e:1b:86:2a inet addr:192.168.2.7 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:27 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14944 errors:0 dropped:0 overruns:0 frame:0 TX packets:14944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1735451 (1.7 MB) TX bytes:1735451 (1.7 MB) vmnet1 Link encap:Ethernet HWaddr 00:50:56:c0:00:01 inet addr:192.168.243.1 Bcast:192.168.243.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:77 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vmnet8 Link encap:Ethernet HWaddr 00:50:56:c0:00:08 inet addr:172.16.162.1 Bcast:172.16.162.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:78 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

    Read the article

  • CodePlex Daily Summary for Monday, August 04, 2014

    CodePlex Daily Summary for Monday, August 04, 2014Popular ReleasesSpace Engineers Server Manager: SESM V1.11: V1.11 - Added the rename option in the map manager - Added the possibility to select map without starting the server - Upgraded the diagnosis page, now more usefull, more colorful, and with a big check/cross sign to tell you if your installation is healthy. Seriously, you must check it out ^^ - Corrected issue #7, now the asteroid count is the real number of asteroid of the current map - Corrected issue #8, the CPU/RAM value of the stats page should be much more accurate nowJson.NET: Json.NET 6.0 Release 4: New feature - Added Merge to LINQ to JSON New feature - Added JValue.CreateNull and JValue.CreateUndefined New feature - Added Windows Phone 8.1 support to .NET 4.0 portable assembly New feature - Added OverrideCreator to JsonObjectContract New feature - Added support for overriding the creation of interfaces and abstract types New feature - Added support for reading UUID BSON binary values as a Guid New feature - Added MetadataPropertyHandling.Ignore New feature - Improv...VidCoder: 1.5.24 Beta: Added NL-Means denoiser. Updated HandBrake core to SVN 6254. Added extra error handling to DVD player code to avoid a crash when the player was moved.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.5: *Added Send-Keys function to send a sequence of keys to an application window (Thanks to mmashwani) *Added 3 optimization/stability improvements to Execute-Process following MS best practice (Thanks to mmashwani) *Fixed issue where Execute-MSI did not use value from XML file for uninstall but instead ran all uninstalls silently by default *Fixed error on 1641 exit code (should be a success like 3010) *Fixed issue with error handling in Invoke-SCCMTask *Fixed issue with deferral dates where th...AutoUpdater.NET : Auto update library for VB.NET and C# Developer: AutoUpdater.NET 1.3: Fixed problem in DownloadUpdateDialog where download continues even if you close the dialog. Added support for new url field for 64 bit application setup. AutoUpdater.NET will decide which download url to use by looking at the value of IntPtr.Size. Added German translation provided by Rene Kannegiesser. Now developer can handle update logic herself using event suggested by ricorx7. Added italian translation provided by Gianluca Mariani. Fixed bug that prevents Application from exiti...HigLabo: HigLabo_20140801: ■Summary Add feature to create SmtpMessage object from System.Net.Mail.MailMessage, HigLabo.Mime.MailMessage. Add feature to get mail header only by using ImapClient. Add some of Portable class library project. Modify Async internal implementation. -------------------------------------------------- ■HigLabo.Converter Bug fix of QuotedPrintableConverter when last char of line is whitespace or tab. ■HigLabo.Core Modify code to add HigLabo.Core.Pcl project. ■HigLabo.Mail Add feature to create...SEToolbox: SEToolbox 01.041.012 Release 1: Added voxel material textures to read in with mods. Fixed missing texture replacements for mods. Fixed rounding issue in raytrace code. Fixed repair issue with corrupt checkpoint file. Fixed issue with updated SE binaries 01.041.012 using new container configuration.Dynamics CRM 2013 Global Advanced Find: Global Advanced Find Solution v1.0.0.0: Global Advanced Find Managed Solution v1.0.0.0Magick.NET: Magick.NET 6.8.9.601: Magick.NET linked with ImageMagick 6.8.9.6 Breaking changes: - Changed arguments for the Map method of MagickImage. - QuantizeSettings uses Riemersma by default.Multiple Threads TCP Server: Project: this Project is based on VS 2013, .net freamwork 4.0, you can open it by vs 2010 or laterAricie Shared: Aricie.Shared Version 1.8.00: Version 1.8.0 - Release Notes New: Expression Builder to design Flee Expressions New: Cryptographic helpers and configuration classes Improvement: Many fixes and improvements with property editor Improvement: Token Replace Property explorer now has a restricted mode for additional security Improvement: Better variables, types and object manipulation Fixed: smart file and flee bugs Fixed: Removed Exception while trying to read unsuported files Improvement: several performance twe...DataBind: DataBind 1.0: - Efficiency ImprovedConsole Progress Bar: ConsoleProgressBar-0.3: - Validate ProgressInPercentageGum UI Tool: Gum 0.6.07: Fixed bug related to setting the parent to screen bounds.Accesorios de sitios Torrent en Español para Synology Download Station: Pack de Torrents en Español 6.0.0: Agregado los módulos de DivXTotal, el módulo de búsqueda depende del de alojamiento para bajar las series Utiliza el rss: http://www.divxtotal.com/rss.php DbEntry.Net (Leafing Framework): DbEntry.Net 4.2: DbEntry.Net is a lightweight Object Relational Mapping (ORM) database access compnent for .Net 4.0+. It has clearly and easily programing interface for ORM and sql directly, and supoorted Access, Sql Server, MySql, SQLite, Firebird, PostgreSQL and Oracle. It also provide a Ruby On Rails style MVC framework. Asp.Net DataSource and a simple IoC. DbEntry.Net.v4.2.Setup.zip include the setup package. DbEntry.Net.v4.2.Src.zip include source files and unit tests. DbEntry.Net.v4.2.Samples.zip ...Azure Storage Explorer: Azure Storage Explorer 6 Preview 1: Welcome to Azure Storage Explorer 6 Preview 1 This is the first release of the latest Azure Storage Explorer, code-named Phoenix. What's New?Here are some important things to know about version 6: Open Source Now being run as a full open source project. Full source code on CodePlex. Collaboration encouraged! Updated Code Base Brand-new code base (WPF/C#/.NET 4.5) Visual Studio 2013 solution (previously VS2010) Uses the Task Parallel Library (TPL) for asynchronous background operat...Wsus Package Publisher: release v1.3.1407.29: Updated WPP to recognize the very latest console version. Some files was missing into the latest release of WPP which lead to crash when trying to make a custom update. Add a workaround to avoid clipboard modification when double-clicking on a label when creating a custom update. Add the ability to publish detectoids. (This feature is still in a BETA phase. Packages relying on these detectoids to determine which computers need to be updated, may apply to all computers).VG-Ripper & PG-Ripper: PG-Ripper 1.4.32: changes NEW: Added Support for 'ImgMega.com' links NEW: Added Support for 'ImgCandy.net' links NEW: Added Support for 'ImgPit.com' links NEW: Added Support for 'Img.yt' links FIXED: 'Radikal.ru' links FIXED: 'ImageTeam.org' links FIXED: 'ImgSee.com' links FIXED: 'Img.yt' linksAsp.Net MVC-4,Entity Framework and JQGrid Demo with Todo List WebApplication: Asp.Net MVC-4,Entity Framework and JQGrid Demo: Asp.Net MVC-4,Entity Framework and JQGrid Demo with simple Todo List WebApplication, Overview TodoList is a simple web application to create, store and modify Todo tasks to be maintained by the users, which comprises of following fields to the user (Task Name, Task Description, Severity, Target Date, Task Status). TodoList web application is created using MVC - 4 architecture, code-first Entity Framework (ORM) and Jqgrid for displaying the data.New ProjectsAndroid_Games: Free downloadsDailyProgrammer Challenge 173: My solution to /r/dailyprogrammer Challenge #173EmotionPing: This a littel software to make ping to a net ip rangeEntityMapper: Library for mapping (or projecting) Entity types (Domain Model) to DTO types (Contract). Made to be compatible with the Linq Provider for Entity Framework.kevinsheldon: private collectionKeyboard Auto-Complete for PC: Did you ever use the auto-complete in mobile phones? Why not on PC?? Now you can!LetsPlay: W co pograsz dzisiaj? Wybierz jedna z gier zainstalowanych w systemie i graj do woli:)Mini ORM like Enterprise library Data Block: A mini ORM like Enterprise library Data Block.ProjkyAddin ssms addin script shortcut ssmsaddin: ProjkyAddin ???Management Studio ??,??SSMS 2005、SSMS 2008、SSMS 2008 R2、SSMS 2012、SSMS 2014,?????????????Management Studio????????????,????????????????????。Reddit Downvote Bot: Reddit Downvote Bot , Mass Downvote a certain reddit user.SQL Server Dialog: This SQL Server Dialog is now release in v.1.0.0VNTalk Messenger: VNTalk MessengerWindyPaper: Test Project

    Read the article

  • CodePlex Daily Summary for Saturday, June 02, 2012

    CodePlex Daily Summary for Saturday, June 02, 2012Popular ReleasesZXMAK2: Version 2.6.2.3: - add support for ZIP files created on UNIX system; - improve WAV support (fixed PCM24, FLOAT32; added PCM32, FLOAT64); - fix drag-n-drop on modal dialogs; - tape AutoPlay feature (thanks to Woody for algorithm)Librame Utility: Librame Utility 3.5.1: 2012-06-01 ???? ?、????(System.Web.Caching ???) 1、??????(? Librame.Settings ??); 2、?? SQL ????; 3、??????; 4、??????; ?、???? 1、????:??MD5、SHA1、SHA256、SHA384、SHA512?; 2、???????:??BASE64、DES、??DES、AES?; ?:???? GUID (???????)??KEY,?????????????。 ?、????? 1、?????、??、?????????; 2、??????????; ?:??????????????(Enum.config)。 ?、???? 1、??????、??、??、??、????????; 2、?????????????????; ?、?????? 1、????? XML ? JSON ?????????(??? XML ??); ?、????? 1、??????????(??? MediaInfo.dll(32?)??); 2、????????(??? ffmpeg...TestProject_Git: asa: asdf.Net Code Samples: Full WCF Duplex Service Example: Full WCF Duplex Service ExampleVivoSocial: VivoSocial 2012.06.01: Version 2012.06.01 of VivoSocial has been released. If you experienced any issues with the previous version, please update your modules to the 2012.06.01 release and see if they persist. You can download the new releases from social.codeplex.com or our downloads page. If you have any questions about this release, please post them in our Support forums. If you are experiencing a bug or would like to request a new feature, please submit it to our issue tracker. This release has been tested on ...Kendo UI ASP.NET Sample Applications: Sample Applications (2012-06-01): Sample application(s) demonstrating the use of Kendo UI in ASP.NET applications.Better Explorer: Better Explorer Beta 1: Finally, the first Beta is here! There were a lot of changes, including: Translations into 10 different languages (the translations are not complete and will be updated soon) Conditional Select new tools for managing archives Folder Tools tab new search bar and Search Tab new image editing tools update function many bug fixes, stability fixes, and memory leak fixes other new features as well! Please check it out and if there are any problems, let us know. :) Also, do not forge...myManga: myManga v1.0.0.3: Will include MangaPanda as a default option. ChangeLog Updating from Previous Version: Extract contents of Release - myManga v1.0.0.3.zip to previous version's folder. Replaces: myManga.exe BakaBox.dll CoreMangaClasses.dll Manga.dll Plugins/MangaReader.manga.dll Plugins/MangaFox.manga.dll Plugins/MangaHere.manga.dll Plugins/MangaPanda.manga.dllPlayer Framework by Microsoft: Player Framework for Windows 8 Metro (Preview 3): Player Framework for HTML/JavaScript and XAML/C# Metro Style Applications. Additional DownloadsIIS Smooth Streaming Client SDK for Windows 8 Microsoft PlayReady Client SDK for Metro Style Apps Release notes:Support for Windows 8 Release Preview (released 5/31/12) Advertising support (VAST, MAST, VPAID, & clips) Miscellaneous improvements and bug fixesMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.54: Fix for issue #18161: pretty-printing CSS @media rule throws an exception due to mismatched Indent/Unindent pair.Silverlight Toolkit: Silverlight 5 Toolkit Source - May 2012: Source code for December 2011 Silverlight 5 Toolkit release.Json.NET: Json.NET 4.5 Release 6: New feature - Added IgnoreDataMemberAttribute support New feature - Added GetResolvedPropertyName to DefaultContractResolver New feature - Added CheckAdditionalContent to JsonSerializer Change - Metro build now always uses late bound reflection Change - JsonTextReader no longer returns no content after consecutive underlying content read failures Fix - Fixed bad JSON in an array with error handling creating an infinite loop Fix - Fixed deserializing objects with a non-default cons...DotNetNuke® Community Edition CMS: 06.02.00: Major Highlights Fixed issue in the Site Settings when single quotes were being treated as escape characters Fixed issue loading the Mobile Premium Data after upgrading from CE to PE Fixed errors logged when updating folder provider settings Fixed the order of the mobile device capabilities in the Site Redirection Management UI The User Profile page was completely rebuilt. We needed User Profiles to have multiple child pages. This would allow for the most flexibility by still f...????: ????2.0.1: 1、?????。WiX Toolset: WiX v3.6 RC: WiX v3.6 RC (3.6.2928.0) provides feature complete Burn with VS11 support. For more information see Rob's blog post about the release: http://robmensching.com/blog/posts/2012/5/28/WiX-v3.6-Release-Candidate-availableJavascript .NET: Javascript .NET v0.7: SetParameter() reverts to its old behaviour of allowing JavaScript code to add new properties to wrapped C# objects. The behavior added briefly in 0.6 (throws an exception) can be had via the new SetParameterOptions.RejectUnknownProperties. TerminateExecution now uses its isolate to terminate the correct context automatically. Added support for converting all C# integral types, decimal and enums to JavaScript numbers. (Previously only the common types were handled properly.) Bug fixe...Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (May 2012): Fixes: unserialize() of negative float numbers fix pcre possesive quantifiers and character class containing ()[] array deserilization when the array contains a reference to ISerializable parsing lambda function fix round() reimplemented as it is in PHP to avoid .NET rounding errors filesize bypass for FileInfo.Length bug in Mono New features: Time zones reimplemented, uses Windows/Linux databaseSharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.1): New fetures:Admin enable / disable match Hide/Show Euro 2012 SharePoint lists (3 lists) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...????SDK for .Net 4.0+(OAuth2.0+??V2?API): ??V2?SDK???: ?????????API?? ???????OAuth2.0?? ????:????????????,??????????“SOURCE CODE”?????????Changeset,http://weibosdk.codeplex.com/SourceControl/list/changesets ???:????????,DEMO??AppKey????????????????,?????AppKey,????AppKey???????????,?????“????>????>????>??????”LINQ_Koans: LinqKoans v.02: Cleaned up a bitNew ProjectsAppleScript Slim: A super slimmed down library allowing you to execute AppleScript from your mono project (from your non MonoMac project).Ateneo Libri: Progetto web per la compravendita di libri universitariAzurehostedservicedashboard: Azure Hosted Service Dashboardcampus: Proyecto de pueba de MVC3 y codeplexDot Net Code Comment Analyzer: This Visual studio 2010 plugin, can count the comments in the C# code in the currently open solution in VS IDE. It shows a summary of the comments across all c# files in the project. this is useful when we want to enforce code comments , Code comments help in maintaining the code base , understanding code faster than going through the lines of code, makes code less dependant on a developer Individual.firstteamproject: H?c tfsFITClub: FITClub is platform fighting arcade game for 2 to 4 players. Enemies are controlled by AI. The goal is to force enemies down into the water or lava and keep safe from their attacks. You collect items to temporarily change your abilities. Multiplayer between more phones is coming soon.Jumpstart Branding for Sharepoint 2010: Basic Master Pages for SharePoint 2010 including a general, minified, heavily commented version of v4.master, a centered, fixed width, minified, commented Master Page and two Visual Studio 2010 solutions, one for farms and a second for sandboxes, to help you create a feature for deploying your Master Pages and other branding assets. Jumptart Branding for SP 2010 has been designed to help you quickly and easily jumpstart your next SharePoint 2010 Branding project.KelControl: Programme exe de controle d'activites. 1 - controle de la reponses de site web - http webrequest d'une Url - analyse du retour ( enetete http) - si ok ( Appel ws similaire a etat mais independant a faire apres niveau 4) - si erreur ( appel ws incrementer l'erreur) (par exemple au bout de 3 erreur declanchement alerte) dans un 1er temp on ne s'occupe pas du ws on inscrit les actions dans un fichier txt par exemple. process complet: - timer 15 minutes (param...KHTest: Visual Studio ??Librame Utility: Librame Utility 3.5.1Linux: this is the Linux project.Magic Morse: ?????????Maps: this is the Maps project.Mark Tarefas: Controlador de Tarefas para Mark AssessoriaMaxxFolderSize: MaxxUtils.FolderSizeMCTSTestCode: Project to hold code tried during learning MCTS CertificationMOBZHash: MOBZHash shows MD5 or SHA hash values for files, and reports files with identical hashes (which are most likely duplicates).NandleNF: Nandle NFNginx: this is the Nginx project. Oficina_SIGA: Siga, é um sistema de gerenciamento de oficinas.Plug-in: this is the Plug-in project.SharePoint Comments Anywhere: This is a very simple project which provides a commenting web part and a list template with the instance to store user's comments. SharePoint OTB only provides commenting capability on the Blog sites where users add their posts and anyone can view the page and add comments. Comments Anywhere can be configured on any list, pages library or any page of the SharePoint site with a web part zone enabling users to add their comments virtually anywhere you as an admin or a power user of your s...SharePoint Site Owners Webpart: SharePoint web part to display SharePoint site owners.Tarea AACQ: Proyecto para tarea FACCI 4A 01/06/12testprjct: test summaryTirailleur: Tirailleur code can be used to model an expanding wildfire (forest fire) perimeter. The code is implemented in VB.NET, and should be easy to translate to other languages. There are just a couple of classes handling the important work. These can be extracted and imported to another program. The code here includes some dummy client objects to represent the containing program. webdama: italian checkers game c#Webowo: wbowo projekt test obslugi tortoise i coldplex

    Read the article

  • eSTEP TechCast - December 2011 - Solaris 11 - The First Cloud OS

    - by uwes
    Dear partner, we are pleased to announce our next eSTEP TechCast on Thursday 1st December and would be happy if you could join. Please see below the details for the next TechCast. Date and time: Thursday, 01. December 2011, 11:00 - 12:00 GMT (12:00 - 13:00 CET) Abstract: Solaris 11 contains many new features, particularly around improved virtualisation and network performance. Additionally, new software packaging for fool-proof upgrades, higher availability and reduced maintenance windows replace the former SRV4 packaging and upgrade/patching methods. Target audience: Tech Presales Speaker: Andrew Gabriel Call Info: Call-in-toll-free number: 08006948154 (United Kingdom) Call-in-toll-free number: +44-2081181001 (United Kingdom) Show global numbers Conference Code: 803 594 3 Security Passcode: 9876 Webex Info (Oracle Web Conference) Meeting Number: 597 686 322Meeting Password: tech2011 Playback / Recording / Archive: The webcasts will be recorded and will be available shortly after the event in the eSTEP portal under the Events tab, where you could find also material from already delivered eSTEP TechCasts. Use your email-adress and PIN: eSTEP_2011 to get access. Feel free to have a look. We are happy to get your comments and feedback. Thanks and best regards, Partner HW Enablement EMEA

    Read the article

  • How to setup a Wireless Access-Point using my laptop's WiFi card?

    - by Abdul Karim Memon
    want to share my Laptops (running Ubuntu 10.10) Broadband with my Android (Galaxy Mini) running 2.2.1. Since Androids currently do not support ad-hoc networks so the "Create new wireless network.." won't help. Q1) How do i setup a Wireless Access Point using my Laptops WiFi card? Q2) What is the difference between an "ad-hoc" network and an "access point"? **abdulkarim@aK-laptop**:~$ lspci | grep ireless 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01) iw list Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) (passive scanning) * 2472 MHz [13] (20.0 dBm) (passive scanning) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 Supported interface modes: * IBSS * managed * ** AP * AP/VLAN** * monitor * mesh point Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * Unknown command (55) * Unknown command (57) * Unknown command (59) * set_wiphy_netns * Unknown command (65) * connect * disconnect

    Read the article

  • CodePlex Daily Summary for Wednesday, August 06, 2014

    CodePlex Daily Summary for Wednesday, August 06, 2014Popular ReleasesRecaptcha for .NET: Recaptcha for .NET v1.6.0: What's New?Bug fixes Optimized codeMath.NET Numerics: Math.NET Numerics v3.2.0: Linear Algebra: Vector.Map2 (map2 in F#), storage-optimized Linear Algebra: fix RemoveColumn/Row early index bound check (was not strict enough) Statistics: Entropy ~Jeff Mastry Interpolation: use Array.BinarySearch instead of local implementation ~Candy Chiu Resources: fix a corrupted exception message string Portable Build: support .Net 4.0 as well by using profile 328 instead of 344. .Net 3.5: F# extensions now support .Net 3.5 as well .Net 3.5: NuGet package now contains pro...Lib.Web.Mvc & Yet another developer blog: Lib.Web.Mvc 6.4.2: Lib.Web.Mvc is a library which contains some helper classes for ASP.NET MVC such as strongly typed jqGrid helper, XSL transformation HtmlHelper/ActionResult, FileResult with range request support, custom attributes and more. Release contains: Lib.Web.Mvc.dll with xml documentation file Standalone documentation in chm file and change log Library source code Sample application for strongly typed jqGrid helper is available here. Sample application for XSL transformation HtmlHelper/ActionRe...Virto Commerce Enterprise Open Source eCommerce Platform (asp.net mvc): Virto Commerce 1.11: Virto Commerce Community Edition version 1.11. To install the SDK package, please refer to SDK getting started documentation To configure source code package, please refer to Source code getting started documentation This release includes many bug fixes and minor improvements. More details about this release can be found on our blog at http://blog.virtocommerce.com.Json.NET: Json.NET 6.0 Release 4: New feature - Added Merge to LINQ to JSON New feature - Added JValue.CreateNull and JValue.CreateUndefined New feature - Added Windows Phone 8.1 support to .NET 4.0 portable assembly New feature - Added OverrideCreator to JsonObjectContract New feature - Added support for overriding the creation of interfaces and abstract types New feature - Added support for reading UUID BSON binary values as a Guid New feature - Added MetadataPropertyHandling.Ignore New feature - Improv...VidCoder: 1.5.24 Beta: Added NL-Means denoiser. Updated HandBrake core to SVN 6254. Added extra error handling to DVD player code to avoid a crash when the player was moved.PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.5: *Added Send-Keys function to send a sequence of keys to an application window (Thanks to mmashwani) *Added 3 optimization/stability improvements to Execute-Process following MS best practice (Thanks to mmashwani) *Fixed issue where Execute-MSI did not use value from XML file for uninstall but instead ran all uninstalls silently by default *Fixed error on 1641 exit code (should be a success like 3010) *Fixed issue with error handling in Invoke-SCCMTask *Fixed issue with deferral dates where th...AutoUpdater.NET : Auto update library for VB.NET and C# Developer: AutoUpdater.NET 1.3: Fixed problem in DownloadUpdateDialog where download continues even if you close the dialog. Added support for new url field for 64 bit application setup. AutoUpdater.NET will decide which download url to use by looking at the value of IntPtr.Size. Added German translation provided by Rene Kannegiesser. Now developer can handle update logic herself using event suggested by ricorx7. Added italian translation provided by Gianluca Mariani. Fixed bug that prevents Application from exiti...SEToolbox: SEToolbox 01.041.012 Release 1: Added voxel material textures to read in with mods. Fixed missing texture replacements for mods. Fixed rounding issue in raytrace code. Fixed repair issue with corrupt checkpoint file. Fixed issue with updated SE binaries 01.041.012 using new container configuration.Magick.NET: Magick.NET 6.8.9.601: Magick.NET linked with ImageMagick 6.8.9.6 Breaking changes: - Changed arguments for the Map method of MagickImage. - QuantizeSettings uses Riemersma by default.Version Control Guide (ex-Branching & Merging): v3.0 - Visual Studio 2013 (Spanish): Important: This download has been created using ALM Ranger bits by the community, for the community. Although ALM Rangers were involved in the process, the content has not been through their quality review. Please post your candid feedback and improvement suggestions to the Community tab of this Codeplex project. Translated by: Juan María Laó Ramos See ¿Habla Español? … Testing Unitario con Microsoft® Fakes http://blogs.msdn.com/b/willy-peter_schaub/archive/2013/08/22/191-habla-espa-241-ol...Windows forms generator: Windows forms generator beta 2: Second beta release of windows forms generator. Have some basic configuration and can handle basic types. Supported types: int string double float long decimal short bool List<E> Vector2 (Microsoft.Xna.Framework, new in beta 2) Fixed bugs in beta 2: Problem with nested classes and list Known bugs: Form height sometimes get weird (fix it by using form attribute on class) Can't create a form with just a listSharePoint Real Time Log Viewer: SharePoint Real Time Log Viewer - Source: Source codeModern Audio Tagger: Modern Audio Tagger 1.0.0.0: Modern Audio Tagger is bornQuickMon: Version 3.20: Added a 'Directory Services Query' collector agent. This collector allows for querying Active Directory using simple DirectorySearcher queries. Note: The current implementation only supports 'LDAP://' related path queries. In a future release support for other 'Providers' will be added as well.Grunndatakvalitet: Initial working: Show Altinn metadata in Excel. To get a live list you need to run the sql script on a server and update the connection string in ExcelMultiple Threads TCP Server: Project: this Project is based on VS 2013, .net freamwork 4.0, you can open it by vs 2010 or laterAricie Shared: Aricie.Shared Version 1.8.00: Version 1.8.0 - Release Notes New: Expression Builder to design Flee Expressions New: Cryptographic helpers and configuration classes Improvement: Many fixes and improvements with property editor Improvement: Token Replace Property explorer now has a restricted mode for additional security Improvement: Better variables, types and object manipulation Fixed: smart file and flee bugs Fixed: Removed Exception while trying to read unsuported files Improvement: several performance twe...DbEntry.Net (Leafing Framework): DbEntry.Net 4.2: DbEntry.Net is a lightweight Object Relational Mapping (ORM) database access compnent for .Net 4.0+. It has clearly and easily programing interface for ORM and sql directly, and supoorted Access, Sql Server, MySql, SQLite, Firebird, PostgreSQL and Oracle. It also provide a Ruby On Rails style MVC framework. Asp.Net DataSource and a simple IoC. DbEntry.Net.v4.2.Setup.zip include the setup package. DbEntry.Net.v4.2.Src.zip include source files and unit tests. DbEntry.Net.v4.2.Samples.zip ...Drop and Create indexes SSIS Task: Assembly and Setup files: This zip contains the task assembly and setup executable's. Click here for the Installation GuideNew ProjectsDestiny of an Emperor: game cocos2d-x sanguoGameCastleVania: Game th?y dungOrchard Application Host: The Orchard Application Host is a portable environment that lets you run your application (not just web apps) inside Orchard (http://orchardproject.net).Orchard Application Host Sample: Sample project for the Orchard Application Host (https://orchardapphost.codeplex.com/).Orchard SSEO Module: Orchard Social & Search Engine Optimization ModulePhoenix Office 365 User Group Website: The Phoenix Office 365 User Group meets once per month in the Phoenix area and facilitates networking and learning around the Office 365 platform. Thingtory ( Inventory of Things ): The Thingtory Framework allows to collect data (inventory) from all kind of "things" (can be a Computer, a Phone or your Fridge ).xRM CI Framework: The xRM Continuous Integration (CI) Framework is a set of tools that makes it easy and quick to automate the builds and deployment of your CRM components.

    Read the article

  • Apache (XAMPP 1.8.0) access.log/Intrusion Detection Concern

    - by Andy Holaday
    [I originally posted on SO but it earned me a Tumbleweed badge. This looks like a better venue for the question.] I have Apache (XAMPP 1.8.0) running on Vista Pro x64. A couple times now I have seen a pattern like the example below in access.log. Concerning is the "attack" seems to somehow shift from a public IP to a valid private IP on my network (happens to be the WAN address of one of my routers). Two questions: How is this possible, and what happens if the "attacker" stumbles on a valid request? I've googled this to no avail. 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.5.4/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.5.5-rc1/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.2.6/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:34 -0400] "GET /phpMyAdmin-2.5.5-rc2/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:19:56 -0400] "GET /phpMyAdmin-2.5.6-rc2/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:56 -0400] "GET /phpMyAdmin-2.5.6-rc1/index.php HTTP/1.1" 403 177.0.X.X - - [03/Jun/2012:08:19:56 -0400] "GET /phpMyAdmin-2.5.5-pl1/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:19:59 -0400] "GET /phpMyAdmin-2.5.7/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:20:01 -0400] "GET /phpMyAdmin-2.5.7-pl1/index.php HTTP/1.1" 403 192.168.15.3 - - [03/Jun/2012:08:20:02 -0400] "GET HTTP/1.1" 400 1060 "-" "-"

    Read the article

  • How to enable Unity 3D support in 12.04 using open-source drivers for RadeonHD cards?

    - by martin
    As the title says I can't enable the Unity 3D support when I'm using open-source drivers (xorg-edgers). I have an xfx Radeon HD 6950 by the way. If I install the proprietary 12.3 drivers from AMD it works, but I get poorer 2D performance than the open-source drivers and also I get some freezes and lock ups at random. So because of this I'm trying the open-source drivers and so far no issues at all, except this one. Running this command $ /usr/lib/nux/unity_support_test -p shows this: OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.2 Not software rendered: no Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: no And this command $ lspci -nn | grep VGA shows: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] [1002:6719] So, is this normal? Do I need to go back to proprietary drivers to enable Unity 3D? If anyone can give me help, I'll much appreciate it.

    Read the article

  • What can I do about rsync of large files killing my laptop's wifi connection

    - by David Dean
    When I run a rsync to backup my home folder over the network like so: rsync -avhz --progress --delete /home/dbdean/ [email protected]:/home/backups/david/ I seem to have problems with my quite large .VirtualBox/HardDisks/Windows XP.vdi file. Occasionally the wifi will silently fail (the transfer stops, and any other network access is broken). If I reconnect the wifi to my network before the transfer times out, it happily keeps going (and other network access is back), but I can't just leave it unattended most of the time, as I have to keep an eye on it. I'm guessing this is probably a bug in the wireless card related to a particularly high sustained volume of network usage, but I'm not really sure where to start with diagnosing this problem so that I can provide a good bug report. Or it could be something else, I guess. Any help would be appreciated. My network card is an Atheros Communications Inc. AR9285, as lspci -k shows: 43:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Hewlett-Packard Company Device 3040 Kernel driver in use: ath9k Kernel modules: ath9k

    Read the article

  • How do i disable intel graphics in a hybrid graphics setup?

    - by Eshwar
    Hi, I have a Dell Vostro 3700 version A10. The relevant bits from lspci -v | grep VGA are: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) and 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 330M] (rev a2) so as you can see this is one of those hybrid graphics laptops. Now, I have no interest in any kind of switching. I would like to completely disable the Intel Graphics thats on the processor. I checked in the xorg.log file and it shows that the intel card is in use. from lsmod i see it uses the i915 module. I tried blacklisting that module in /etc/modprobe.d/blacklist.conf but that didn't really work because i still couldn't use the nvidia card for display. I wish there was a BIOS option to disable, but there isn't. Some people have also suggested changing the SATA mode to compatibility, but that does not work either in this case as the intel vga controller still shows up in lspci I tried setting the busid manually in the /etc/X11/xorg.conf file but it still didn't work. It gave me an error that said something along the lines of screen not detected. any bits of xorg.log that you'd like me to attach? So what I am looking for is some solution that allows me to completely disable the use of the intel vga controller. if it was blocked somehow it'd be nice. as if it were not present. Any suggestions? I am desperate here actually. Because I cannot use the HDMI port right now on my laptop for that reason. My guess is this applies to desktops that also have Core i5 processors with onchip graphics as well as dedicated graphics cards. How would they go about solving the problem?

    Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >