Search Results

Search found 29354 results on 1175 pages for 'scala 2 10'.

Page 690/1175 | < Previous Page | 686 687 688 689 690 691 692 693 694 695 696 697  | Next Page >

  • What software this log file comes from? [closed]

    - by mickula
    From what software comes this logfile? Please specify full name. Internal IP Threshold FlowsDiff 40 flows/s, Diff: 73 flows/s Sum 26.962 flows/300s (89 flows/s), 32.162.000 packets/300s (107.206 packets/s), 1,198 GByte/300s (32 MBit/s) External 87.98.238.221, 26.958 flows/300s (89 flows/s), 32.156.000 packets/300s (107.186 packets/s), 1,198 GByte/300s (32 MBit/s) External 89.230.69.49, 2 flows/300s (0 flows/s), 2.000 packets/300s (6 packets/s), 0,000 GByte/300s (0 MBit/s) External 89.231.190.149, 1 flows/300s (0 flows/s), 3.000 packets/300s (10 packets/s), 0,000 GByte/300s (0 MBit/s) External 89.239.101.20, 1 flows/300s (0 flows/s), 1.000 packets/300s (3 packets/s), 0,000 GByte/300s (0 MBit/s)

    Read the article

  • how to debug BSOD irql_not_less_or_equal error

    - by Sev
    So I'm getting the irql_not_less_or_equal BSOD. I tried looking at the event viewer for potential causes, and cannot find any. I also checked the CPU temperature in BIOS right after the error and that was fine. I've tried 2 sets of RAM chips already, both give the issues. The error doesn't happen consistently...it happens daily, but many hours can pass and it won't happen, or only 10 minutes can pass and it might happen again. By the way, just bought the parts and built the computer myself a couple of weeks ago. How to debug the cause for this? Hardware info: Asus P6X58D PREMIUM motherboard Intel core i7 930 quad core 2.8 ghz Kingston 128 GB SSD 3 Gb/sec Nvidia Geforce GTX 465 PNY Edition Corsair 12 GB DDR3 1600 Mhz Ram Windows 7 Ultimate

    Read the article

  • PHP processes run one at a time, always taking 100% of one core

    - by Derek Kurth
    We have seven websites written in PHP running on a Windows 2008 server with IIS 7.5. They are all very slow right now. When I look in Task Manager, I see around 10 php-cgi.exe processes, and they are all taking 0% of the CPU, except one, which is taking 25%. It's a quad-core server, so it's taking 100% of one core. If I watch for a few seconds, the process taking 25% will go to 0%, and a different php-cgi.exe process will jump to 25%. So all the php-cgi.exe processes are just lined up, waiting on a single core, and each process uses 100% of the processor when it can. Each of the 7 sites is in its own application pool in IIS, and we're using FastCGI. The PHP version is 5.3. Any ideas? Thanks!

    Read the article

  • ssh freezes when trying to connect to some hosts

    - by NS Gopikrishnan
    When I try to ssh to particular machine/s in a list, The SSH command happens to be freezing. I tried out setting ssh timeout. But then also it's freezes even after the timeout. In verbose mode : OpenSSH_3.9p1, OpenSSL 0.9.7a Feb 19 2003 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to x358.x.server.com [10.x.x.x] port 22. debug1: fd 3 clearing O_NONBLOCK debug1: Connection established. debug1: identity file /export/home/sqlrpt/.ssh/identity type -1 debug1: identity file /export/home/sqlrpt/.ssh/id_rsa type -1 debug1: identity file /export/home/sqlrpt/.ssh/id_dsa type 2 At this point it freezes. A work around I thought was to create a child process for each ssh calls and if the process doesn't respond after a timeout - Kill it. But are there any less complex ways, so that I can accommodate it in a shell script itself rather than going for a C/C++ program ?

    Read the article

  • HUGE MAC FILTER and scripting

    - by user195917
    I make an dhcp server on CentOS, and i apply a mac filter for my clients. Now, with a small number of clients (max 10) ,is not that hard, but what I will do with 2000 clients? My idea was to create a list (ex. "macfilter.lst") and this list, to be updated after a database. I have tow questions. First: How do i create a filter in IPTABLES that takes info`s from a file (file hosted on server) Second: Any idea about how to write a script, that update a file after a database?? Thanks so much for your help.

    Read the article

  • Same album repeatedly updates when syncing iTunes with iPhone

    - by Unsliced
    I have many many albums and tracks purchased via the iTunes store both through iTunes directly and via the iPhone. They all synchronise properly and are on iTunes eventually (i.e. if purcashed originally on the iPhone). There's one album, though, purchased via the iTunes app in June this year. Virtually every time I sync the iPhone it says "updating files" and this album gets updated. The rest of the sync goes just fine, new tracks added, listened to podcasts are removed, playlists are updated (notwithstanding that smart playlists' orderings are now utterly broken) fine - but this album is always getting updated. In finder I've looked at the permissions and nothing seems unusual. FWIW, I'm on Mac OS X 10.5.8, iPhone 3.1.2, iTunes 9.02. Anyone with any ideas? It's not a fundamental problem, but it does means that each sync takes an extra 30-60 seconds, which is annoying!

    Read the article

  • Web server suddenly stopped working

    - by wezten
    I have a web server, which was working fine. It also was an FTP server and a Windows Remote Desktop server, all working fine. Someone called our ISP to increase the internet speed, and suddenly nothing works - I can connect with Teamviewer, but HTTP, FTP & RD doesn't work. Disabled firewall. Ran Wireshark - the packets don't come through at all. Set the webserver to port 20111, in case the ISP is blocking port 80, and again, the packets didn't come through at all. (localhost:20111 works fine) Port forwarding is set up for ports 80, 21, 3389 & 20111 to 10.0.0.32 (which is the correct address - checked with ipconfig). Restarted router and computer. I would be very grateful for any help.

    Read the article

  • Difference between “system-on-chip” and “CPU”

    - by Tim
    Very confused, in some websites, they have this line: iPhone 5s CPU: Apple A7 other websites saying that: iPhone 5s System-on-chip: Apple 7 CPU: 1.3 GHz 64bit dual core other sources saying that iPhone 5s System-on-chip: Apple 7 CPU: 1.3 GHz 64bit dual core Apple 7 In Wikipedia, it said: The Apple A7 is a 64-bit system on a chip (SoC) designed by Apple Inc. It first appeared in the iPhone 5S, which was introduced on September 10, 2013. Apple states that it is up to twice as fast and has up to twice the graphics power compared to its predecessor, the Apple A6. While not the first 64-bit ARM CPU, it is the first to ship in a consumer smartphone or tablet computer. There are 2 sentences: The Apple A7 is a 64-bit system on a chip (SoC) and While not the first 64-bit ARM CPU Wikipedia also said “The A7 features an Apple-designed 64-bit 1.3–1.4 GHz ARMv8-A dual-core CPU, called Cyclone”. So System on chip is also CPU? very confused

    Read the article

  • Linux/Apache performance very slow even on local network

    - by klausch
    I have an Ubuntu server machine running Apache and MYSQL. System and version info is as follows: Linux kernel 3.0.0.-12 Apache/2.2.20 MySQL Ver 14.14.Distrib 5.1.58 I am running a few websites on this server, some HTML only, some PHP/MySQL. THe [problem is that response time is very slow, both on static as well as the dynamic sites. Sometimes it takes more than 10 seconds before a response is given, this makes the sites very slow and almost unusable. The problem occurs even when requesting from the local network. I have added the involved subdomains to my /etc/hosts file, and abolve all the problem is not solved by using IP numbers instead of URL's. So there is no DNS lookup issue. I have modified the log format by showing the response times and sometimes a files takes 12 seconds to be served, see the jquery~.js file in the example screenshot. I have no explanation for this extremely long response time, but is is not even the only issue here, some other files takes a long time to be served too, but do not show a long response time in the log file. So probably different tissues are involved here. I cannot find a solution until now, any suggestions??? THanx in advance, Klaas link to screenshot picture from access logfile Some extra configuration info: apache2.conf (comment is removed) LockFile ${APACHE_LOCK_DIR}/accept.lock PidFile ${APACHE_PID_FILE} Timeout 300 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 5 <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> <IfModule mpm_event_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> DefaultType text/plain HostnameLookups Off ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn Include mods-enabled/*.load Include mods-enabled/*.conf Include httpd.conf Include ports.conf LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\" %T/%D" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent Include conf.d/ Include sites-enabled/ And the virtual hostfile for one of the slow sites, in fact it is pretty straightforward... <VirtualHost *:80> ServerAdmin [email protected] ServerSignature EMail ServerName toenjoy.drsklaus.nl DocumentRoot /var/www/toenjoy.drsklaus.nl <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/toenjoy.drsklaus.nl/> Options Indexes FollowSymLinks MultiViews AllowOverride AuthConfig AuthType Basic AuthName "To Enjoy" AuthUserFile /etc/.htpasswd Require user petraaa Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> And the output of free -m: klaas@ubuntu-server:/etc/apache2$ free -m total used free shared buffers cached Mem: 1997 1401 595 0 144 1017 -/+ buffers/cache: 238 1758 Swap: 2035 0 2035 and I have no indication that swapping occurs on the moments the site is slow. I have runned top and it does not appear to be a CPU issue. I have the impression that the spawning of a apache thread could maybe be the bottleneck but it is just a suggestion. Maybe this gives some extra information! EDIT: The problem seemed to be gone for some time but occurs again! And not only with Apache, also connecting using SSH takes a tremendous time, sometimes it takes up to 15 seconds before the keyphrase is asked for. Also scp works very slowly. The behavious is really unpredoctable and makes the server very hard to use. Any ideas...?

    Read the article

  • MySQL returning slow queries with result sets bigger than 30 rows

    - by josephs8
    When ever I run a query that exceeds 30 queries the time for the query to run goes from less than a second to over 10 seconds to get data. Example I run a query to return 29 rows, it takes .1 seconds, I run a query to return 31 rows it takes 11.2 seconds. I am running mySQL on Windows 2008 Server Dual Core 2.6Ghz with 3GB of Memory. The machine doesn't run anything else. It does have a instance of MSSQL running on the server but that does not get used at all. This only happens via PHP right now, If I manually run the query on the server it returns it in less than a second. The queries are not complicated either I have included one below: SELECT Name, Value FROM `bis_co`.`departments` LIMIT 31 What would be causing this issue and how can I correct this? Am I missing a configuration setting in MySQL or something. Thanks

    Read the article

  • What is a proper MySql replication configuration for frequent db updates and rare selects?

    - by serg555
    We currently have 1 master db on its own server and slave db on app server. App executes very frequent but light updates (like increasing counters), and occasional (once in a few minutes) heavy selects (which is the most important part of the app). When app was connected only to master db there were no performance issues. With slave db introduction CPU load avg on app server increased to about 6-10 during that heavy select period (from 3-4 as before). When server doesn't run those frequent updates it seems like performance for selects stays within the limits. So I have a feeling that those updates is what is causing the performance drop (also these frequent updates are not critical so if slave db doesn't have them in sync with master for some time it would be ok). What would be a good db replication setup for such kind of app? What are the replication parameters we could tweak? Thanks.

    Read the article

  • Nginx Tornado Combination Causing 502 Bad Gateway Errors

    - by PlaidFan
    We are facing a problem with inconsistent 502 errors and tracking down the reasons has been a very frustrating exercise. We can reproduce the problem by sending several simultaneous requests quickly. The problem is that several is only in the range of 10 to 20 within a 5 seconds (not a typo). So clearly this type of load should be handled easily. We really like the Nginx + Tornado approach but are considering going to a more traditional (e.g. threading) approach because this problem has been very difficult to solve. I was wondering if you a) know how to fix this issue and b) how we can tracked down the culprit(s). The log files simply identify there being a connection refused. We have the same problem as this post: How do I debug a HTTP 502 error? But there is no answer provided on how to solve the problem so I'm hoping you can help because this may be a common issue with this type of setup. Thanks in advance, Paul

    Read the article

  • Windows Server 2008 R2 - Can't connect RDP over the Internet

    - by Jonathan DeMarks
    I have two networks: Domain and Public, Domain is a VPN connection and Public is the local connection to the network. This is not a domain controller or a DNS/DHCP server. I can connect via RDP from the local network (192.168.1.), from the VPN network (10.1.2.), and from the VPN network over the internet. I cannot connect from the internet (anywhere besides where the server is VPN'd) Wireshark indicates that the server is getting packets, and the audit log is indicating that the packets are being dropped. Advanced Firewall has explicit options to allow RDP, and has no deny policies. I have also tried turning Firewall off completely to no avail. I'm really lost on this one.

    Read the article

  • VMware - Broadcom 1000Gbps NIC does not link at 100Mbps to a Cisco switch port

    - by Spirit
    Today we've stumbled on a very awkward situation with our VMWare Server. The server is with ESX 3.5 that has a 1Gbps NIC. We bought a brand new managed Cisco Linksys switch with 10/100Mbps interface ports but when we plugged the cable in one of the ports the link simply does not wanted to activate :S... Does anyone with more VMware experience have ever had similar problem? From what I know is that 1Gbps NICs are backwards compatible with 100Mbps switches. This is what we've tryed so far but with no success: Tryed: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1004089 Tryed to modify the /etc/modules.conf folowing the guide from this article http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=813 After the changes I have restarted the networking services using # service network restart, # service mgmt-vmware restart and # service vmware-vpxa restart It seems that no matter how many times, or whatever approach/method (GUI or Shell) we try to change the speed and duplex of the network adapter and to force it to 100mbps it only accepts 1Gbps .. I am starting to go nuts :@

    Read the article

  • Snow Leopard Hangs at Login Window

    - by jessecurry
    I've had an issue for the past few months, but I rarely restart so it hasn't caused too much trouble. Basically, when I start up my Mac (iMac10,1 - 3.06GHz Intel Core 2 Duo, OS X 10.6.3) everything proceeds as usual until I reach the login window. The login window displays normally, but keyboard and mouse input seem to be ignored. This condition persists for around 5 minutes at which time everything goes back to normal. While the login window is frozen my second monitor appears entirely blue, the second monitor receives a background as soon as the login window becomes responsive. If I startup while holding SHIFT the problem still occurs, but the freeze is much shorter. Looking through my logs I see no activity during the time that the login window is frozen. I've attempted to repair disk permissions, and gone through every possible maintenance option in Cocktail.

    Read the article

  • Domain migration - 301 Redirect of all contentes of directory)

    - by Trufa
    Hi, I would like to know if it is possible to do the following considering that I would like to migrate domains. I have lets say: one.com/files/one.html one.com/files/two.php one.com/other/three.html one.com/other/four.doc one.com/other/subdirectory/five.doc I am migrating to two.com So I would like to make RESPECTIVE 301 redirects to the following: two.com/old/files/one.html two.com/old/files/two.php two.com/old/other/three.html two.com/old/other/four.doc two.com/old/other/subdirectory/five.doc I've tried with cPanel and although I come "close" with the redirects option I can't seem to make it happen. The folders are not much (10 -12) the file are a lot, and obviously impossible to make it manually. How would you proceed? Can this/ should this be done with regex from the .htaccess?? Can you direct all the elements of a subdirectory in the manner expressed above? I hope the question is clear enough, if not please ask for any clarification needed!! Thanks in advance!!

    Read the article

  • What is the fastest RAID in practise?

    - by Luke
    I'm going to be rebuilding my server, and I want much faster access to my data. I've used RAID 1 and 0 in the past, and decided upon RAID 10 (dedicated RAID card). Then someone told me to use RAID 5+0, then someone else told me to use RAID 6+0. Assuming the Hardware RAID Card supports each level, what is currently the FASTEST RAID available, given x number of hard drives? Reliability is now another factor, and I am willing to spend money on new drives if a drive (or multiple) fail. I simply want to know what the fastest RAID level is, along with some reliability for recovering from a failure

    Read the article

  • Justification of Amazon EC2 Performance

    - by Adroidist
    I have a .jar file that represents a server which receives over TCP an image in bytes (of size at most 500 kb) and writes it file. It then sobels this image and sends it over TCP socket to the client side. I ran it on my laptop and it was very fast. But when I put it on Amazon EC2 server m1.large instance, i found out it is very slow - around 10 times slower. It might be the inefficiency in the code algorithm but in fact my code is nothing but receive image (like any byte file) run the sobel algorithm and send. I have the following questions: 1- Is it normal performance of Amazon EC2 server- I have read the following links link1 and link2 2- Even if the code is not that efficient, the server is finally handling a very low load (just one client), does the "inefficient" code justify such performance? 3- My laptop is dual core only...Why would the amazon ec2 server have worse performance that my laptop? How is this explained? Excuse me for my ignorance.

    Read the article

  • How to enable the flash player plugin in IE8?

    - by Nik Reiman
    I updated to IE8 the other day on my Vista laptop, mostly because Windows Update kept bugging me about it. As a Chrome user, I don't really care so much about IE8, but I do have to use it occaisionally to test website compatibility. At any rate, flash seems to be completely deactivated, and I don't see a place to re-enable it anywhere in the preferences. I've done a bit of googling on the issue, but only found information about how to disable flash, not how to actually enable it. I have the flash 10 debug player installed, and it works fine with Chrome and Firefox. What could be the matter?

    Read the article

  • Super user in LDAP?

    - by John8894
    I am running 10 Linux machines that is doing different types of work. The machines are configured to use LDAP authentication so when one user is configured in slapd he can login on all the machines. To make maintenance easier i want to create a root account in slapd so i can use this instead of the local root accounts when installing applications etc. but i am not sure on how to do this. Is it enough to create a user with the name root and gid/uid 0? should the local root be disabled somehow? I am fully aware that this is normally not a good idea from a security perspective, but as mentioned before this is a special case.

    Read the article

  • Check the disk for problems on Debian Lenny

    - by Equ
    Hi guys! I just bought a VPS hosting with Debian Lenny (I'm new to all this world). I've managed to install and setup everthing I need pretty well. My testing website works fast as expected most of the time, but sometimes it is really slow (response time is about 5-10 seconds). I checked everything and seems that there are may be some disk issues. How can I check the disk for problems/performance? What else could possible cause such a behaviour? Thank you!

    Read the article

  • Manually forcing TCP connection to retry

    - by Vi.
    I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without delays in GNU/Linux?

    Read the article

  • how to know who is accessing my system?

    - by calvin
    Is it possible to know if anyone is accessing any of folders or drives in my system(32 bit windows 2003)? I mean shared folders or non-shared folders, anything. And once if we know, how to deny access to particular host. For shared folders i know how to do, but if anyone is accessing some folder with proper credentials, i don't know how to control. Please ignore cases like bit torrent etc. All i wanted to know is if anyone is accessing my system folders in this way \\10.30.188.231\d$\calvin_docs with some valid username and password. I wanted to know ip/username of system who is accessing

    Read the article

  • The Software Update tool shows already installed updates

    - by Gilead
    The Software Update tool shows already installed updates. I already installed them a few times, clicking either the 'Update All' button or the indivisual 'Update' buttons. The apps are: Keynote, Numbers, Pages, Skitch, Evernote, Fotor. 'Check for unfinished downloads' reports all downloads have finished. Signing out and back in and reloading didn't help. $ sudo softwareupdate -ia Password: Software Update Tool Copyright 2002-2012 Apple Inc. Finding available software No updates are available. Googling didn't help. How can I fix the GUI tool so it updates its status? OSX 10.9.3

    Read the article

  • MySQL gzipped Export in PhpMyAdmin has wrong size in Mozilla

    - by Michal Gow
    That is really strange. I am using PhpMyAdmin 2.11.9.6 on Linux hosting. While I am Exporting databases using "gzipped" compression in Mozilla, I am getting files which have size of uncompressed database, but they seems to be downloading in incredible speed (10 times quicker than is possible using my ISP). So at the end: for database of 10M size I am getting 10M gzip downloaded in miniseconds it has indeed shown 10M size on drive it is corrupted Zip compression is working just fine (I am getting file with cca 1M size with fine content of compressed database) And the weirdest thing: that is happening for Mozilla Firefox (13.0.1) only, Internet Explorer 9 is downloading correct gzipped files... Any hint?

    Read the article

< Previous Page | 686 687 688 689 690 691 692 693 694 695 696 697  | Next Page >