Search Results

Search found 18728 results on 750 pages for 'setup deployment'.

Page 693/750 | < Previous Page | 689 690 691 692 693 694 695 696 697 698 699 700  | Next Page >

• Need advice on which PCI SATA Controller Card to Purchase

  - by Matt1776

  I have a major issue with the build of a machine I am trying to get up and running. My goal is to create a file server that will service the needs of my software development, personal media storage and streaming/media server needs, as well as provide a strong platform for backing up all this data in a routine, cron-job oriented German efficiency sort of way. The issue is a simple one - all my drives are SATA drives and my motherboard controller only contains 4 ports. Solving the issue has proven to be an unmitigated nightmare. I would like advice on the purchase of the following: 4 Port internal SATA / 2 Port external eSATA PCI SATA Controller Card that has the following features and/or advantages: It must function. If I plug it in and attach drives, I expect my system to still make it to the Operating System login screen. It must function on CentOS, and I mean it must function WELL and with MINIMAL hassle. If hassle is unavoidable, there shall be CLEAR CUT and EASY TO FOLLOW instructions on how to install drivers and other supporting software. I do not need nor want fakeRAID - I will be setting up any RAID configurations from within the operating system. Now, if I am able to find such a mythical device, I would be eternally grateful to whomever would be able to point me in the right direction, a direction which I assume will be paved with yellow bricks. I am prepared to pay a considerable sum of money (as SATA controller cards go) and so paying anywhere between 60 to 120 dollars will not be an issue whatsoever. Does such a magical device exist? The following link shows an "example" of the type of thing I am looking for, however, I have no way of verifying that once I plug this baby in that my system will still continue to function once I've attached the drives, or that once I've made it to the OS, I will be able to install whatever drivers or software programs I need to make it work with relative ease. It doesn't have to be dog-shit simple, but it cannot involve kernels or brain surgery. http://www.amazon.com/gp/product/B00552PLN4/ref=pd_lpo_k2_dp_sr_1?pf_rd_p=486539851&pf_rd_s=lpo-top-stripe-1&pf_rd_t=201&pf_rd_i=B003GSGMPU&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=1HJG60XTZFJ48Z173HKY So does anyone have a suggestion regarding the subject I am asking about? PCI SATA Controller Cards? It would help if you've had experience with the component before - that is after all why I am asking here - for those who have had experience that I do not have. Bear in mind that this is for a home setup and that I do not have a company credit card. I have a budget with a 'relative' upper limit of about $150.00.

  Read the article

• DNS NS and domain clarification

  - by thejartender

  I am really trying to get my home web server up and I don't seem to be succeeding. My web server withing my host system is running my web application and is viewable at the current isp ip 88.89.190.171 over WAN indicating that the webapp is fine and that router ports are forwarded. I have set up a DNS on this system with a single name server in the network and I manage to ping it with ping ns.thejarbar.org I have registered this private name server at my current hosting provider. My domain (thejarbar.org) is obviously registered and I have pointed it to my name server. My question here is if it is simply a matter of waiting on propagation for me to be able to ping my domain? Another way of asking this is if the fact that my name server is discoverable indicates that I have set it up correctly to be used? I have tested with dig and dig -x on my host and have A records for the name server. The server is not the Authorative server so I am concerned that this may be the reason why my site is not discoverable. Is there anything else I may need to so still? I only have one ns. currently, but should this succeed I will be purchasing a more stable secondary system to host my development applications. This is my best chance at getting work (freelance development) due to illness) and this I feel is the last step I need to succeed. Please note that this is temporarily a home server and I will most likely be using it as part of a professional setup very soon I will likely have to repeat this question therefore in a prefessional context in a few weeks as nothing will be different other than the fact that I am going to have a server running elsewhere. I am using bind9 and Ubuntu 12.10 and my records are: $TTL 3D @ IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); thejarbar.org. IN A 10.0.0.42 @ IN NS ns.thejarbar,org. yuccalaptop IN A 10.0.0.19 ns IN A 10.0.0.42 gw IN A 10.0.0.138 www IN CNAME thejarbar.org. $TTL 3D 0.0.10.in-addr.arpa. IN SOA ns.thejarbar.org. email. ( 13112012 28800 3600 604800 38400 ); 0.0.10.in-addr.arpa. IN NS ns.thejarbar.org. 42 IN PTR thejarbar.org. 19 IN PTR yuccalaptop.thejarbar.org. 138 IN PTR gw.thejarbar.org. My localhost IP is 10.0.0.42 I wish for this to be my host and name server.

  Read the article

• Ping Unknown Host on CentOS at EC2

  - by organicveggie

  Weird problem. We have a collection of servers running CentOS 5 on EC2. The setup includes two DNS servers and two LDAP servers. DNS has a CNAME pointing at the primary LDAP server. One machine (and only one machine) is giving me problems. I can ssh into the server using LDAP authentication. But once I'm on the machine, ping won't resolve the LDAP host even though DNS seems to work fine. Here's ping: $ ping ldap.mycompany.ec2 ping: unknown host ldap.mycompany.ec2 Here's the output of dig: $ dig ldap.mycompany.ec2 ; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5_5.3 <<>> ldap.studyblue.ec2 ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 2893 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ldap.mycompany.ec2. IN A ;; ANSWER SECTION: ldap.mycompany.ec2. 3600 IN CNAME ec2-hostname.compute-1.amazonaws.com. ec2-hostname.compute-1.amazonaws.com. 55 IN A aaa.bbb.ccc.ddd ;; Query time: 12 msec ;; SERVER: 10.32.159.xxx#53(10.32.159.xxx) ;; WHEN: Tue May 31 11:16:30 2011 ;; MSG SIZE rcvd: 107 And here is resolv.conf: $ cat /etc/resolv.conf search mycompany.ec2 nameserver 10.32.159.xxx nameserver 10.244.19.yyy And here is my hosts file: $ cat /etc/hosts 10.122.15.zzz bamboo4 bamboo4.mycompany.ec2 127.0.0.1 localhost localhost.localdomain And here's nsswitch.conf $ cat /etc/nsswitch.conf passwd: files ldap shadow: files ldap group: files ldap sudoers: ldap files hosts: files dns bootparams: nisplus [NOTFOUND=return] files ethers: files netmasks: files networks: files protocols: files rpc: files services: files netgroup: files ldap publickey: nisplus automount: files ldap aliases: files nisplus So DNS works the way I would expect. And I can ping the ldap server by ip address. And I can even access the box with SSH using LDAP authentication. Any suggestions?

  Read the article

• routing through multiple subinterfaces in debian

  - by Kstro21

  my question is as simple as the title, i have a debian 6 , 2 NICs, 3 different subnets in a single interface, just like this: auto eth0 iface eth0 inet static address 192.168.106.254 netmask 255.255.255.0 auto eth0:0 iface eth0:0 inet static address 172.19.221.81 netmask 255.255.255.248 auto eth0:1 iface eth0:1 inet static address 192.168.254.1 netmask 255.255.255.248 auto eth1 iface eth1 inet static address 172.19.216.3 netmask 255.255.255.0 gateway 172.19.216.13 eth0 is conected to a swith with 3 differents vlans, eth1 is conected to a router. No iptables DROP, so, all traffic is allowed. Now, passing the traffic through eth0 is OK, passing the traffic through eth0:0 is OK, but, passing the traffic through eth0:1 is not working, i can ping the ip address of that sub interface from a pc where this ip is the default gateway, but can't get to servers in the subnet of the eth1 interface, the traffic is not passing, even when i set the iptables to log all the traffic in the FORWARD chain and i can see the traffic there, but, the traffic is not really passing. And the funny is i can do any the other way around, i mean, passing from eth1 to eth0:1, RDP, telnet, ping, etc, doing some work with the iptable, i manage to pass some traffic from eth0:1 to eth1, the iptables look like this: iptables -t nat PREROUTING -d 192.168.254.1/32 -p tcp -m multiport --dports 25,110,5269 -j DNAT --to-destination 172.19.216.1 iptables -t nat PREROUTING -d 192.168.254.1/32 -p udp -m udp --dport 53 -j DNAT --to-destination 172.19.216.9 iptables -t nat PREROUTING -d 192.168.254.1/32 -p tcp -m tcp --dport 21 -j DNAT --to-destination 172.19.216.11 iptables -t nat POSTROUTING -s 172.19.216.0/24 -d 172.19.221.80/29 -j SNAT --to-source 172.19.221.81 iptables -t nat POSTROUTING -s 172.19.216.0/24 -d 192.168.254.0/29 -j SNAT --to-source 192.168.254.1 iptables -t nat POSTROUTING -s 172.19.216.0/24 -o eth0 -j SNAT --to-source 192.168.106.254 dong this is working, but,it is really a headache have to map each port with the server, imagine if i move the service from server, so, now i have doubts: can debian route through multiple subinterfaces?? exist a limit for this?? if not, what i'm doing wrong when i have the same setup with other subnets and it is working ok?? without the iptables rules in the nat, it doesn't work thanks and i hope good comments/answers

  Read the article

• Problems set-up Single Sign-On using Kerberos authentication

  - by user1124133

  I need for Ruby on Rail application set authentication via Active Directory using Kerberos authentication. Some technical information: I are using Apache installed mod_auth_kerb In httpd.conf I added LoadModule auth_kerb_module modules/mod_auth_kerb.so In /etc/krb5.conf I added following configuration [logging] default = FILE:/var/log/krb5libs.log kdc = FILE:/var/log/krb5kdc.log admin_server = FILE:/var/log/kadmind.log [libdefaults] default_realm = EU.ORG.COM dns_lookup_realm = false dns_lookup_kdc = false ticket_lifetime = 24h forwardable = yes [realms] EU.ORG.COM = { kdc = eudc05.eu.org.com:88 admin_server = eudc05.eu.org.com:749 default_domain = eu.org.com } [domain_realm] .eu.org.com = EU.ORG.COM eu.org.com = EU.ORG.COM [appdefaults] pam = { debug = true ticket_lifetime = 36000 renew_lifetime = 36000 forwardable = true krb4_convert = false } When I test kinit validuser and enter password then authentication is successful. klist returns: Ticket cache: FILE:/tmp/krb5cc_600 Default principal: [email protected] Valid starting Expires Service principal 02/08/13 13:46:40 02/08/13 23:46:47 krbtgt/[email protected] renew until 02/09/13 13:46:40 Kerberos 4 ticket cache: /tmp/tkt600 klist: You have no tickets cached In application Apache configuration I added IfModule mod_auth_kerb.c> Location /winlogin> AuthType Kerberos AuthName "Kerberos Loginsss" KrbMethodNegotiate off KrbAuthoritative on KrbVerifyKDC off KrbAuthRealms EU.ORG.COM Krb5Keytab /home/crmdata/httpd/apache.keytab KrbSaveCredentials off Require valid-user </Location> </IfModule> I restarted apache Now some tests: When I try to access application from Win7, I got pop-up message box, with text: Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentification without a secure connection) When I enter valid credentials then my application opens successfully, and all works fine. Questions: Is ok that for user pop-ups such windows? If I use NTLM authentication then there no such pop-up. I checked IE Internet Options and there 'Enable Integrated Windows Authentication' is checked. Why IE try to send username and password to application apache? If I correct to understand then Windows self must make authentication via Active Directory using Kerberos protocol. When I try to access application from Win7 and I enter incorrect credentials to pop-up message box Application say Authentication failed (this is OK) In apache error log I see: [error] [client 192.168.56.1] krb5_get_init_creds_password() failed: Client not found in Kerberos database But now I cannot get possibility to enter valid credentials, only when I restart IE I can get again pop-up box. What could be incorrect or missing in my Kerberos setup? I read in some blog post that probably something is needed to be done in Active Directory side. What exactly?

  Read the article

• Suspected network performance issue on VirtualBox Ubuntu guest on Win7 host

  - by Adam

  I set up Ubuntu 12.04 in VirtualBox on the Win7 machine I was allocated on my new project. I am running Java, Eclipse, Tomcat to develop a large data-intensive application and I noticed that this application runs at half the speed of my colleague's identical machine, where he runs it all under Windows. I think I have narrowed down the performance issue to the network, after comparing and equalising all the Java VM settings with my colleague. Is there a ping test I can do or some other network diagnostic test to flag up any problems? To give some background, the network performance is confusing. Running a network speed test to my colleague's machine with iperf shows speeds of 6 Mb/s from my Ubuntu guest, and 90 Mb/s from the win7 host. Large downloads, e.g. the Java SDK, come down at about 1.2 MB/s on both the guest and the host. Pings are sub-1ms on the host, but 1.5ms on the guest. I also did a broadband speed test, and got 10Mb/s download speed on both, but the host has an upload speed of 10Mb/s but the guest only uploads at 3Mb/s. I've been trying to diagnose any MTU problems with ping -M do to identify any kind of packet fragmentation problem but it's progressing very slow because I don't have much experience in this area. From what I read on other people's networking issues with VB and Linux guests on Win7 hosts, I should be able to get the speed on the guest up to the same level as the host. I installed a fresh VM with Ubuntu again to see if I'd foobar'd it somehow, but I'm getting the same readings with iperf on the virgin installation. My setup is: Adapter 1: Intel PRO/1000 MT Desktop (NAT) Adapter 2: ditto (host-only adapter) eth0 Link encap:Ethernet HWaddr 08:00:27:0b:76:bf inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe0b:76bf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:86236 errors:0 dropped:0 overruns:0 frame:0 TX packets:49369 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:69163946 (69.1 MB) TX bytes:3530535 (3.5 MB) eth2 Link encap:Ethernet HWaddr 08:00:27:a3:26:b8 inet addr:192.168.56.101 Bcast:192.168.56.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fea3:26b8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:59 errors:0 dropped:0 overruns:0 frame:0 TX packets:57 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9148 (9.1 KB) TX bytes:7648 (7.6 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:701 errors:0 dropped:0 overruns:0 frame:0 TX packets:701 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:66321 (66.3 KB) TX bytes:66321 (66.3 KB)

  Read the article

• Hard freeze on new computer

  - by mphair

  OCZ Gold 3x2GB 240-Pin DDR3 SDRAM PC312800 Palit NE5T240SFHD01 GeForce GT240 1GB 128-bit GDDR5 ASUS P7P55D-E LGA 1156 P55 SATA 6Gb/s USB 3.0 ATX Intel Motherboard Intel Core i7-860 Lynnfield 2.8GHz 8MB L3 Cache LGA 1156 95W Quad-Core Processor SAMSUNG 22X Optical drive (DVD+-R/RW) CORSAIR CMPSU-620HX 620W ATX12V V2.2 Windows 7 Ultimate x64 Brand new system (got it from newegg two days ago) and it booted up and installed windows and ran for a day just fine. Yesterday, I boot it up in the afternoon and run various games at full graphics for most of the day. I turn on WoW and play for a few hours and it hard stalls. No numlock switching, no mouse feedback but nothing going wrong on the screen. No BSOD. I wait a bit to see if the stall is just a temporary one, but then force shutdown the computer. Upon reboot, everything seems fine, windows sees that it didn't shut down properly but I go into normal boot and restart WoW. I'm able to load it up and start running around when it freezes again. This time when I restart, it doesn't even get to BIOS. It starts (power goes on) and it just hangs with no output to the monitors. I shut it off and went to bed. This morning, I turned it on and went into BIOS setup. I'm not terribly experienced with messing with BIOS settings but I checked over them the best I could. Everything seems fine so I boot into windows and browse the internet for a bit looking for a solution, hard freeze within 10 minutes. I restart and go into BIOS and check the CPU temperature, 40c. I'm kinda stumped here. Some people say it might be a memory issue, but why would it take so long for it to come up? Could it have been slowly accessing one memory stick at a time and then it just got to a bad one and that's what is causing it to fail? It seems odd that I don't get a BSOD from a hardware failure. Having the screen just halt with no input or output change seems like a software thing to me. Any thoughts?

  Read the article

• amazon ec2 ubuntu with gitlab and nginx - cant load?

  - by thebluefox

  Ok, so I've spooled up an Amazon EC2 server running Ubuntu, and then followed the instructions below to install GitLab; http://doc.gitlab.com/ce/install/installation.html The only step I've not been able to complete is running the following check on the status; sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production I get the following error; rake aborted! Errno::ENOMEM: Cannot allocate memory - whoami Which I presume is becuase my EC2 is just running a free tier setup, so isn't that well spec'd. Regardless, I've been trying to access this through my browser. I've set up the elastic IP and pointed my domain at it (for the purpose of this, lets say its git.mydom.co.uk). Doing a whois on this domain shows me its pointing to the right place. For some reason though, I get the "Oops, Chrome could not connect to git.mydom.co.uk". Now - for a period of time I was getting the Nginx holding page (telling me I still needed to perform configuration). This though disappeared after removing the default file from /etc/nginx/sites-enabled/ (after reading this could be issue on a troubleshooting page). Since then, I've had nothing, even when I symlinked the file back in from /sites-available. I've tried changing the owner of the git.mydom.co.uk file sat inside /sites-enabled and /sites-available to www-data, as suggested here, but I could only change the permission of the file in /sites-available, and not the symlinked one in /sites-enabled. The content of this file is as follows; upstream gitlab { server unix:/home/git/gitlab/tmp/sockets/gitlab.socket; } server { listen *:80 default_server; # e.g., listen 192.168.1.1:80; In most cases *:80 is a good idea server_name git.mydom.co.uk; # e.g., server_name source.example.com; server_tokens off; # don't show the version number, a security best practice root /home/git/gitlab/public; # Increase this if you want to upload large attachments # Or if you want to accept large git objects over http client_max_body_size 20m; # individual nginx logs for this gitlab vhost access_log /var/log/nginx/gitlab_access.log; error_log /var/log/nginx/gitlab_error.log; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback, see below try_files $uri $uri/index.html $uri.html @gitlab; } All the paths mentioned in here look ok...I'm about at the end of my knowledge now!

  Read the article

• How to configure ASP.NET MVC 3 on IIS 6 (Windows 2003 R2)

  - by Nedcode

  I am getting 403 Directory Listing Denied for the root and 404 for an action that I know should exist. Background: I have build and deployed an ASP.NET MVC 2 applcation a long time ago. Later I upgraded it to MVC 3 and it is still working with not configuration changes. Setting it up on a windows 2003 R2 (Standard) initialy was a pain, but after a couple of days(yes, days) struggling it started working. Now I have to do the same with the same application on a different server (2003 R2 Standard again) on a different network. .Net 4 is installed and allowed ASP.NET MVC 3 is also installed By default IIS is set to use .net 4 I verify aspnet_isapi.dll used in application extension are from version 4.0.30319 .NET asemblies folder. I also added the wildcard mapping to aspnet_isapi.dll and unchecked verify file exists. Under Directory Security in Authentication Methods I have disabled anonymos access and enabled Integrated Windows authentication(same as the one on the server that it works) I have copied the same web.config with the <authentication mode="Windows" /> <authorization> <deny users="?" /> </authorization> I have set Read & Execute, List Folder Contents, and Read for the Networkservice account(under which the app pool is working). Also I have set the same for Network account, IIS_WPG, ASPNET and IUSR_MAchineName. I do not have an EnableExte??nsionlessUrls but even if I create it and set it to true or false it does not help. I also tried http://haacked.com/archive/2010/12/22/asp-net-mvc-3-extensionless-urls-on-iis-6.aspx and it did not help. But I kept getting 403 Directory Listing Denied for the root and 404 for an action that I know should exist. Web Platform installer was then used to re-install and possibly update .net, asp.net etc. I then noticed IIS was reset to default. So I added the wildcard mapping again. No, luck still 403. I exported configuration files from the working server setup and created new default app pool and new default website using those configurations. Still I get 403 Directory Listing Denied for the / and 404 for any action I try.

  Read the article

• PHP Sessions suddenly not working

  - by styrken

  Out of no where my php sessions does not work anymore. The server have been running fine for several months. I'am running Ubuntu 11.10 (GNU/Linux 3.0.0-14-server x86_64) with nginx/1.0.11 and php 5.3.19-1~dotdeb.0 Session info copied from phpinfo() Session Support enabled Registered save handlers files user memcached Registered serializer handlers php php_binary wddx Directive Local Value Master Value session.auto_start Off Off session.bug_compat_42 Off Off session.bug_compat_warn Off Off session.cache_expire 180 180 session.cache_limiter nocache nocache session.cookie_domain no value no value session.cookie_httponly Off Off session.cookie_lifetime 0 0 session.cookie_path / / session.cookie_secure Off Off session.entropy_file no value no value session.entropy_length 0 0 session.gc_divisor 1000 1000 session.gc_maxlifetime 1440 1440 session.gc_probability 0 0 session.hash_bits_per_character 5 5 session.hash_function 0 0 session.name PHPSESSID PHPSESSID session.referer_check no value no value session.save_handler files files session.save_path /tmp /tmp session.serialize_handler php php session.use_cookies On On session.use_only_cookies On On session.use_trans_sid 0 0 I have setup the following php script to test with: error_reporting(E_ALL); ini_set('display_errors', true); error_log($_SERVER['REMOTE_ADDR'] . ' visited test page'); if(session_start()) echo "Session started <br />"; else echo "Session failed <br />"; echo '<a href="?', time(), '">refresh</a>', "\n"; echo '<pre>'; echo 'session id: ', session_id(), "\n"; $sessionfile = ini_get('session.save_path') . '/' . 'sess_'.session_id(); echo 'session file: ', $sessionfile, ' '; if ( file_exists($sessionfile) ) { echo 'size: ', filesize($sessionfile), "\n"; echo '# ', file_get_contents($sessionfile), ' #'; } else { echo ' does not exist'; } echo PHP_EOL; $_SESSION['number'] = (int) @$_SESSION['number'] + 1; var_dump($_SESSION); echo "</pre>\n"; session_write_close(); echo 'done.'; It tells me that the session file exists, but my session id changes on each refresh.. What is going wrong? There is no output to any error logs at all.. :/ Please help!

  Read the article

• PHP hits 100% CPU and eats RAM at the same time Monday to Friday

  - by Daniel Samuels

  We run a learning platform for primary schools here in the UK and it's all been running extremely well. However at around 4PM Monday to Friday we see the same issue arise -- 1-2 PHP threads will spike to 100% CPU and gradually start eating up RAM until the server(s) fall over. 98%+ of our requests are HTTPS, these come into our Layer 7 load balancer which then decrypts the SSL data, adds the X-HTTP-Forwarded-For header and forwards the data onto an application server (we have 2 of those at the moment) on port 80. Our application servers have Varnish on port 80 which takes in the request from the load balancer and passes the request through to Nginx on port 81. Nginx then works out which 'vhost' it needs to use and passes any PHP processing through to PHP-CGI which is listening on a socket (managed through spawn-fcgi). There's an instance of Memcached running too, MySQL runs on a separate server / slave setup. Throughout the day the load will typically go no higher than 0.8 on either of the application servers, however at around 4PM our problem arises. I've managed to run strace on a few of the actual threads when they cause the problem and I always see the same thing: stat("/usr/share/zoneinfo/Europe/London", {st_mode=S_IFREG|0644,st_size=3661, ...}) = 0 stat("/usr/share/zoneinfo/Europe/London", {st_mode=S_IFREG|0644,st_size=3661, ...}) = 0 This is repeated infinitely and never stops until you SEGKILL the process or oomkiller kills it. There are no cron jobs scheduled to run at that time and I don't have any way of seeing exactly what Nginx request is associated with the PHP process which is running. We are running PHP 5.3.14 which we upgraded to from 5.3.8 last week to rule out the older version being the problem. This issue has been going on a few months now and we have no idea what is causing it. We deploy our software very frequently, so it's difficult to track down a specific release which may have started the problem - especially as we do not know the date of the first occurrence of this issue. Varnish is version 3.0.1, Nginx is 1.0.6 (which I understand is about a year old now), our servers are running CentOS release 5.7 (Final) they have Intel i3 540s at 3.07Ghz and 8GB of RAM. There's a discussion on the Debian mailing list about something very similar, you can find that here. Has anyone seen anything like this in the past, does anyone have any ideas or suggestions? Are there a way of linking an Nginx request directly to a PHP thread? Is there a better way of seeing what the PHP process is doing? (I've seen GDB mentioned, though I'll have to recompile PHP) Thanks!

  Read the article

• What is good usage scenario for Rackspace Cloud Files CDN (powered by AKAMAI) [closed]

  - by Andrew Smith

  I have just setup my website as static page via Rackspace CDN / Akamai. www.example.co.uk is an alias for d9771e6f24423091aebc-345678991111238fabcdef6114258d0e1.r61.cf3.rackcdn.com. d9771e6f24423091aebc-345678991111238fabcdef6114258d0e1.r61.cf3.rackcdn.com is an alias for a61.rackcdn.com. a61.rackcdn.com is an alias for a61.rackcdn.com.mdc.edgesuite.net. a61.rackcdn.com.mdc.edgesuite.net is an alias for a63.dscg10.akamai.net. a63.dscg10.akamai.net has address 63.166.98.41 a63.dscg10.akamai.net has address 63.166.98.40 a63.dscg10.akamai.net has IPv6 address 2001:428:4c02::cda8:ecb9 a63.dscg10.akamai.net has IPv6 address 2001:428:4c02::cda8:ed09 The HTTP header: HTTP/1.0 200 OK Last-Modified: Fri, 19 Oct 2012 23:27:41 GMT ETag: fdf9e14b77def799e09e8ce815a521da X-Timestamp: 1350689261.23382 Content-Type: text/html X-Trans-Id: tx457979be3bd746c2b4e5403a1189cdbc Cache-Control: public, max-age=900 Expires: Sat, 27 Oct 2012 22:18:56 GMT Date: Sat, 27 Oct 2012 22:03:56 GMT Content-Length: 7124 Connection: keep-alive I am wondering, if it's really the fastest solution to power the website? By investigating it thru http://www.just-ping.com/ it seems, that from many places the ping is very high, and during quick investigation I found that they use GeoIP to resolve addresses based on WHOIS, which is not accurate and because of that from many places the ping is above 300ms (for example, if ISP is in balgladore and request is routed to bangladore even if it's 300ms, for period of 1 month), while by just using Amazon Web Services and Route 53 Anycast DNS servers and only 4 EC2 instances it seems that for example India is always below 100ms, while using Akamai it goes above 300ms in some cases, and this is because Route 53 is using BGP. By quickly checking the Akamai, it seems that they are not getting feedback from the traffic - the high ping stays constant even if I keep downloading large files and videos, which is opposite to what they say on their website. They state, that they optimize the performance by taking feedback from the requests, while it seems they just use GeoIP with per City resolution (which are mostly big cities). Because of this, AWS with Route 53 / Anycast DNS seems to be much more reliable, as well EdgeCast which is using BGP, but I dont know how much does it cost to deploy static website. Actually, I dont know if EdgeCast is not a lie, because from isolated places there are many errors - so their performance is at the cost of quality of delivery, because of BGP switching the routes during transfer of large files. So I was wondering, what is really Akamai good for, because they dont seem to pose any strength in any field in what I do understand now, except they offer some software based WAF on their website, but what I really care about is the core distribiution, so the question is? Is really Akamai good for Videos? For static websites? ??? I found so far AWS most usable with most consistent ping and stable transfers.

  Read the article

• Linux Software RAID1 Rebuild Completes, but after reboot, its degraded again

  - by zimmy6996

  I have been beating my head with an issue here, and I'm now turning to the internet for help. I have a system running Mandrake Linux, with the following configuration: /dev/hda - This is a IDE drive. Has some partitions on it that boot the system and make up most of the file system. /dev/sda - This is drive 1 of 2 for a software raid /dev/md0 /dev/sdb - This is drive 2 of 2 for a software raid /dev/md0 md0 gets mounted but fstab as /data-storage, so it is not critical to the systems ability to boot. We can comment it out of fstab, and the system works just fine either way. The problem is, we have a failed sdb drive. So I shut the box down, and have pulled the failed disk and installed a new disk. When the system boots up, /proc/mdstat shows only sda as part of the raid. I then run the various command to rebuild the RAID to /dev/sdb. Everything rebuilds correctly, and upon completion, you look at /proc/mdstat and it shows 2 drives sda1(0) and sdb1(1). Everything looks great. Then you reboot the box ... UGH!!! Once rebooted, sdb is missing again from the RAID. It is like the rebuild never happened. I can walk through the commands to rebuild it again, and it will work, but again, after reboot, the box seems to make sdb just vanish! The real odd thing is, if after reboot, I pull sda out of the box, and try to get the system to load with the rebuilt sdb drive in the system, and when I do, the system actually throws and error just after grub, and says something about drive error, and the system has to shut down. Thoughts??? I'm starting to wonder if grub has something to do with this mess. That the drive isn't being setup within grub to be visible at boot? This RAID array isn't necessary for the system to boot, but when the replacement drive is in there, without SDA it won't boot system, so it makes me believe there is something to that. On top of that, there just seems to be something wonky here the drive falling off of RAID after reboot. I've hit the point of pounding my head on the keyboard. Any help would be greatly appreciated!!!

  Read the article

• OpenVPN multiple servers on the same subnet, high availability

  - by andre

  Hey everyone. Let me start by saying that my Linux experience isn't super awesome but I can usually find my way around things easily. Over at work we have an OpenVPN setup that's been due for some improvement for a while now. The main server (tap mode) runs in our office, behind a rather slow DSL connection. The main problem is that, since I'm usually out of the office, every time I want to access something on the virtual network I have to go through that server to get anywhere else. We have two servers up on 100 Mbit connections that we use for development and production purposes, about 3 more servers in the office (one of them behind a different T1 line for VOIP) and about two dozen clients who use the network on a daily basis from various locations. We've had situations where network routing (outside of our control) would not allow people to reach our main OpenVPN server whilst the other locations were connectable. Also any time someone outside the office wants to fetch something from any of the servers (say, a 500 MB code repository), a whopping 20 KB/s download speed is just unacceptable these days (did I mention slow DSL? ok). We had to implement traffic shaping on this server since maxing out this connection was fairly trivial. I had the thought of running two (or more) OpenVPN servers in the network. These would have to have the same subnet though, as our application relies on virtual network's IP addresses for some of its core functionality. The clients would also preferably retain the same IP addresses but that's not vital. For simplicity, lets call the current server office and the second server I'm setting up, cloud. Call the server on the T1 phone. This proved to be rather complex because as soon as I connect to cloud, I cannot see office. Any routes to a server that would go through office also do not work while I'm connected to cloud (no ping, nothing) and vice-versa. There's no rules for iptables that would be blocking the traffic either. Recently I came across this article on linuxjournal but the solution they provide seems to only cover the use of two servers and somewhat outdated (can't even find much documentation, their wiki is offline). They also state that adding more servers would be a complex task. Ideally I would like to keep the existing server office running the virtual network and also run the OpenVPN daemon on the cloud and phone servers (100 Mbit and very reliable connection, respectively) so that we're on safe ground in case of a hardware failure, DSL failure, etc. So, in essence, I'm looking for a highly available OpenVPN solution (fix, patch, hack, tweak, whatever you want to call it) that will accept connections on multiple hosts (2 or more) whilst keeping the same IP address subnet regardless of the server to which you connect to. Thanks for reading and sorry for the long post, I hope it gets the point across :P

  Read the article

• SSH Socks Proxy wiith iptables REDIRECT

  - by Radium

  I have googled and haven`t found the answer on my question. Help me please. There are two servers: serverA with public IP 12.0.0.10 and an private IP 10.0.0.5 serverB with public IP 20.0.0.11 I have setup SOCKS proxy on serverB to serverA: ssh -D20.0.0.11:2222 [email protected] So when on my local machine in a browser i specify SOCKS proxy 20.0.0.11:2222 (serverB:2222) as external IP while browsing i get 12.0.0.10 (serverA IP). That is ok. As well if i go onto http://10.0.0.5 (serverA private IP) it is also reachable. That is what i need. I want to make servers A private IP to be available through servers B public IP on certain ports but without specifying SOCKS in my browser. I could use ssh port forward but the problem is - i need to forward many ports and do not know which exactly - i know only the range. So when i connect to 20.0.0.11 to any port , for example, from 3000:4000 range, i want that traffic to be redirected to 10.0.0.5 on the same port. That is why i`ve decided maybe SOCKS proxy via SSH and iptables REDIRECT could help me. Client - serverBPublicIP (any port from range 3000:4000) - serverAPublicIP - serverAPrivateIP (the port was requested on serverBPublicIP) On serverB i do: ssh -D20.0.0.11:2222 [email protected] iptables -t nat -A PREROUTING -d 20.0.0.11 -p tcp --dport 3000:4000 -j REDIRECT --to-port 2222 But that does not work - when i telnet on 20.0.0.11:3001 for example i do not see any proxied traffic on the serverA. What should i do else? I have tried tcpsocks like this (in example i am telneting to 20.0.0.11:3001) Client -> 20.0.0.11:3001 -> iptables REDIRECT from 3001 --to-port 1111 -> tcpsocks from 1111 to 2222 -> SOCKS proxy from serverB to serverA on port 2222 -> serverA But i do not know what to do with the traffic on serverA. How to route it to its private IP. Help me please. I know, VPN removes all the hell i am trying to create, but i have no ability to use tun/tap device. It is disabled.

  Read the article

• Can't validate mine, sudo nor root in Debian "Jessie" Gnome anymore?

  - by Janar

  I'm Debian beginner & GUI guy in a bit of trouble? Can't login as sudo/gksu/root/su nor as (main/super)user after removed user password via Gnome-user-settings. History of actions (Probably irrelevant though) Installed Debian "Jessie" GNU/Linux with xFce GUI (en-US) as only OS. HardWare is ThinkPad w510. Skipped root user password in setup, to get sudo for superuser easily. Logged in (as always had) with Gnome (3.4.x), not once with xFCE. (installed Xfce. Installed xFce only to achieve more control (easier management) over packages this way, to set-up gnome much more by mine likes. Added more jessie repros (same ones as in Wheesy stable by default but for Jessie as, Jessie only had repros for security updates by default). Installed lots of gtk(3) & gnome(3) based soft; (- restarted again after this) Installed propietary graphics card driver for mine nvidia quadro. (- restarted once again after that one) Installed more stuff related to mine work/school/devel. The actual problem Had a plan to restart again, but wanted to set up auto-login first, instead set user password to none (don't ask why / perhaps caused by being awake for a looooong time), noticed it, and set also to auto-login, but couldn't undo mine previous mistake to create new password for me. As mine password is set to none I would have expected that simply return in pass prompt for emty password field would do, but it won't authenticate. I tried Alt+F2 "gksu gedit" as well as: sudo wget "https://www.some-page.eu/file.ext" and "su" in terminals, none has applied (quite logical actually - as I'm sudoer and highest ranked super user, besides only user in computer). Current stand Everything worked & still works nice after this accident, besides this password prompts part. To spoked to log-out nor restart. Synaptic package-manager is still open with root rights (only one, that has left open prior to the issue and not closed since, just in case). Goggled for help and read some manuals/faqs/how-tos - mostly lead to sudoers file management, but not found one specifically for mine issue - so still not any smarter. Really hope, that I don't have to redo OS inst all over again, by just one stupid mistake. Thanks for your reply :-)

  Read the article

• Change Logon DPI setting in Windows 8.1

  - by jmc302005

  I love how M$ keeps making decisions for me about how I want my desktop to look. Now they have added per-user dpi settings. The problem this has created is that there is no adjustable dpi setting for the Lock/Logon screen. Let me explain. you can change the dpi setting to be the same across all displays and this does affect the icons and font on the lock/logon screen. However it does not affect any app/program that can run on the lock/logon screen. Ex. I use a 44" flat screen tv for my monitor on my desktop. Big enough for me to sit in my recliner and use my comp. But I don't have a wireless keyboard. And it sucks having the wire from the keyboard running across the floor. Plus I really don't want to keep a keyboard next to me. So I use the on screen keyboard for logging in and quick typing (search, web address, etc.) So the problem is that with the new dpi setup my on screen keyboard takes up nearly half the screen. Does M$ think we are all blind? Oh no I remember they think desktops should look like tablets and phones. I tried looking through the registry to see if I could find a setting for it. In the key HKEY_USERS.DEFAULT\Control Panel\Desktop there is a string value named "LogicalDPIOverride" with a value of -1. I have a feeling this is where I can fix the issue. I tried changing the value to 0 and to 1 with no change in the result. Instead I noticed that after logging out and back in the -1 value was back in the registry. So now M$ has also added a way for us to not be able to change a setting in the registry. They are making it harder and harder for us power users to be able to do anything with the settings in windows. Soon we will all have the same exact Windows with absolutely no customization. ok sorry for the quick rant. The real question here is. How can I change this defualt dpi crap? Can I use the LogPixels string that worked for dpi in Windows 7? Here are 2 Screen shots 1 of the Lock Screen and 1 of the Logon Screen http://i.imgur.com/6RM5ufE.jpg http://i.imgur.com/cnY5bmm.jpg Please any help will be appreciated.

  Read the article

• nginx + Jetty - thousands of connections stuck in LAST_ACK

  - by virulence

  I have a FreeBSD machine with jails -- two in particular, one that runs nginx and another that runs a Java program that accepts requests via Jetty (embedded mode) Jetty receives upwards of 500 requests/sec constantly and there has been an issue lately where I will constantly have over 60,000 connections in the LAST_ACK state between nginx and jetty. Distribution of all connections (includes some other services, particularly php-fpm) root@host:/root # netstat -an > conns.txt root@host:/root # cat conns.txt | awk '{print $6}' | sort | uniq -c | sort -n 18 LISTEN 112 CLOSING 485 ESTABLISHED 650 FIN_WAIT_2 1425 FIN_WAIT_1 3301 TIME_WAIT 64215 LAST_ACK Distribution of nginx - jetty connections root@host:/root # cat conns.txt | grep '10.10.1.57' | awk '{print $6}' | sort | uniq -c | sort -n 1 3 CLOSE_WAIT 3 LISTEN 18 FIN_WAIT_2 125 ESTABLISHED 64193 LAST_ACK I'd prefer every request to fully close the connection. Clients requests are about 10 minutes apart from each other so connections must be closed. Some of the connections, tcp4 0 0 10.10.1.50.46809 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46805 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46797 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46794 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46790 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46789 10.10.1.57.9050 LAST_ACK tcp4 0 0 10.10.1.50.46771 10.10.1.57.9050 LAST_ACK etc.. On Jetty's end I've set maxIdleTime to 2000 -- before this all connections were in ESTABLISHED but they are now LAST_ACK On Jetty's end I've set Connection: close (i.e response.setHeader(HttpHeaders.CONNECTION, HttpHeaderValues.CLOSE);) Jetty never reports a lot of open connections -- always very few. PF/IPFW is not currently being used nginx - reset_timedout_connection is on I cannot figure out how to get nginx or jetty to forcibly close the connection, is this simply something that needs to be fixed in Jetty so that it fully closes the socket after the request finishes? Thanks a lot in advance EDIT: forgot my nginx config for the proxy setup- proxy_pass http://10.10.1.57:9050; proxy_set_header HTTP_X_GEOIP $http_x_geoip; proxy_set_header GEOIP_COUNTRY_CODE $geoip_country_code; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header Connection ""; proxy_http_version 1.1; EDIT2: Forcing Jetty to close the connection via request.getConnection().getEndPoint().close() does nothing -- it's obvious the connection IS being closed (as it's in LAST_ACK) but why isn't it getting past this? Is Nginx keeping the connection open to the backend for some reason?

  Read the article

• Local Apache on Windows XP not finishing page requests

  - by asgeo1

  I have Apache 2.2.11 installed locally on my Windows XP (SP3) dev machine, which I setup about 3 months ago. I have just started having a strange problem in the last few week. Apache is serving some basic PHP applications like phpMyAdmin. When I make a page request, Apache appears to not finish serving all resources for that page. Firefox shows the "Transferring data from servername..." message, and the page never completes. The same problem happens in Internet Explorer too. I can sometimes tell which resource it is waiting on, because most of the page will render except for some image or similar resources. (Not sure why Firebug doesn't show this) It doesn't have the problem every page request - for page requests where most of the resources are cached in my browser, the page request will work with no problems. Or pages that are very light will work with no problems. However, if I "hard" refresh the page, I will have this problem (probably because it is requesting all page resources) Does anyone know what this could be? It is so strange that it has only just started happening - and I did not make any changes to my system (that I am aware of) I tried playing with the Apache ThreadsPerChild setting, but it did not seem to make a difference. UPDATE: I have been doing some more tests. I have been serving the most basic of pages, just a plain HTML file: <html> <body> <h1>testing</h1> </body> </html> If I request this page multiple times in a row, AND each request occurs immediately after the previous has completed, then 50% of the time the request will time out. However, if I put a 1-2 second gap between requests, then there is no problem. This correlates to what I have observed when the brower requests a real application page. When the browser has nothing cached, then all of the page resources are requested from the browser in a short amount of time - this appears to trigger the problem. UPDATE2: Nathan Long has helped me understand the issue a little better with the server-status page (see below). It is weird, it is like the server has a hickup sending data to the client. The client sits there waiting forever for data that never arrives. Closing the client process does not terminate the connection on the server - the server still has active threads for each previously attempted connection, but they just sit there - not sending any data and never terminating. (even though the client is now closed) Only a restart of the server seems to terminate them.

  Read the article

• mac + parallels and https site test = router restarts

  - by Erik

  Ok I have an interesting & very frustrating problem happening. I'm going to explain it the best I can. I work as a graphic designer & web designer on a mac and have a Comcast internet connection that comes through a Comcast branded router (SMC8014) which then ties into an Airport Extreme Base Station which runs my office network. I run OS 10.5.7 and also run Parallels 4.0.3 (running Windows XP) for testing websites in Internet Explorer and so on. Ok, so that the basic background. Here's my issue. I've been collaborating an ecommerce website with another designer/developer and when testing the site on the PC side we have started to run into some sort of network problem. The site is https if that matters at all I suspect it may. Basically when I run parallels for testing I am constantly having to restart the router in order to connect to the test site (it's hosted). Funny thing is I can access the rest of the internet fine, just not this site I'm working on until I restart the router (It's sorta like the site is timing out). This never happens when just running the Mac side of things. It only becomes an issue when Parallels is open and I am doing page refreshes while making css or HTML edits via something like Coda or CSS edit (connected to the hosting server via ftp). The real problem is that once the problem starts I only get about 2 or 3 page loads before I have to restart the router again. It's absolutely crippling. I cannot get any work done when I have to restart the router every couple of minutes. So, if you think this problem is isolated to me, the answer is no. The designer/developer I'm collaborating with has an office a couple miles away and experiences very similar problems under slightly different setup. He also has Comcast as his internet provider and connects his router to an Airport and primarily works on a mac. The main difference is that rather than using a visualizer like parallels to test the website on the PC he uses a real live PC that is on his network. Once he fire up the PC to do testing he runs into the same issue described above. After a couple of page refreshes in Internet Explorer or other browser on the PC the site becomes unresponsive and the router has to get restarted. Any thoughts on what is going on here would be greatly appreciated. Thanks in advance.

  Read the article

• Loss of wireless network connectivity when playing video via HDMI cable

  - by Jeff Fohl

  Hi Folks - New to Super User, so I hope this question fits in with the guidelines. Very strange problem I am having, and I am at a loss as to how to continue troubleshooting this one. The basic problem is that when I attempt to watch streamed video on a particular display device (an Optoma HD180 projector), my network connectivity drops like a stone to barely measurable levels. This is my setup: I have a Dell H2C 730x running Windows 7 64bit. This particular computer has two ATI Radeon HD 4800 video cards. I have two Samsung 22" monitors connected to one card, and an Optoma HD180 digital projector connected to the other card via an HDMI cable. My internet connection is normally a reliable 6Mbps. The problem I am having occurs when I stream video (or even just browse the web) on the Optoma Projector. When I do this, my internet connection drops to practically zero (just a few kilobits per second). When I move the browser away from the projector, and over to one of my Samsung monitors, the internet connection comes right back. Note that the Optoma projector is on and enabled as a third monitor all this time. I can move the mouse around on the projector without triggering the problem. I tried pinging my router when I was playing a movie on one of the monitors, and I get a 1 millisecond response. However, when I have the movie playing on the Optoma projecter, pinging the router gives me response times in the hundreds of milliseconds, or times out completely. So, it clearly is something local to my machine - and not some sort of throttling occurring down the line. I would think that it is possibly something to do with the HDMI driver conflicting somehow with my network driver (which is a USB-based wireless connection). This one has me really stumped. Anyone have any ideas? EDIT: I am now leaning towards the possibility that the HDMI cable is somehow interfering with the wireless network, when large amounts of data are being pushed through the cable. Is this possible?

  Read the article

• SSL support with Apache and Proxytunnel

  - by whuppy

  I'm inside a strict corporate environment. https traffic goes out via an internal proxy (for this example it's 10.10.04.33:8443) that's smart enough to block ssh'ing directly to ssh.glakspod.org:443. I can get out via proxytunnel. I set up an apache2 VirtualHost at ssh.glakspod.org:443 thus: ServerAdmin [email protected] ServerName ssh.glakspod.org <!-- Proxy Section --> <!-- Used in conjunction with ProxyTunnel --> <!-- proxytunnel -q -p 10.10.04.33:8443 -r ssh.glakspod.org:443 -d %host:%port --> ProxyRequests on ProxyVia on AllowCONNECT 22 <Proxy *> Order deny,allow Deny from all Allow from 74.101 </Proxy> So far so good: I hit the Apache proxy with a CONNECT and then PuTTY and my ssh server shake hands and I'm off to the races. There are, however, two problems with this setup: The internal proxy server can sniff my CONNECT request and also see that an SSH handshake is taking place. I want the entire connection between my desktop and ssh.glakspod.org:443 to look like HTTPS traffic no matter how closely the internal proxy inspects it. I can't get the VirtualHost to be a regular https site while proxying. I'd like the proxy to coexist with something like this: SSLEngine on SSLProxyEngine on SSLCertificateFile /path/to/ca/samapache.crt SSLCertificateKeyFile /path/to/ca/samapache.key SSLCACertificateFile /path/to/ca/ca.crt DocumentRoot /mnt/wallabee/www/html <Directory /mnt/wallabee/www/html/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> <!-- Need a valid client cert to get into the sanctum --> <Directory /mnt/wallabee/www/html/sanctum> SSLVerifyClient require SSLOptions +FakeBasicAuth +ExportCertData SSLVerifyDepth 1 </Directory> So my question is: How to I enable SSL support on the ssh.glakspod.org:443 VirtualHost that will work with ProxyTunnel? I've tried various combinations of proxytunnel's -e, -E, and -X flags without any luck. The only lead I've found is Apache Bug No. 29744, but I haven't been able to find a patch that will install cleanly on Ubuntu Jaunty's Apache version 2.2.11-2ubuntu2.6. Thanks in advance.

  Read the article

• Help needed setting up nginx to serve static files.

  - by Catalina

  Hi Guys, I'm trying to setup nginx to serve static files. Basically all I need is to have http://mydomain.com/site_media/ point to /var/django/myproject/site_media. I have tried so many configurations and when I test it I always get a 404 error for static files. Can anyone please tell me what I'm doing wrong or how I should be setting this up? This is my current nginx configuration file. user www-data; worker_processes 1; #error_log /usr/local/nginx/logs/error.log; #pid /usr/local/nginx/logs/nginx.pid; events { worker_connections 1024; use epoll; } http { # Enumerate all the Tornado servers here upstream frontends { server 127.0.0.1:8000; server 127.0.0.1:8001; server 127.0.0.1:8002; server 127.0.0.1:8003; } include mime.types; default_type application/octet-stream; #access_log /usr/local/nginx/logs/access.log; keepalive_timeout 65; proxy_read_timeout 200; sendfile on; tcp_nopush on; tcp_nodelay on; gzip on; gzip_min_length 1000; gzip_proxied any; gzip_types text/plain text/html text/css text/xml application/x-javascript application/xml application/atom+xml text/javascript; proxy_next_upstream error; server { listen 80; # Allow file uploads client_max_body_size 50M; location ^~ /site_media/ { root /var/django/myproject/site_media; if ($query_string) { expires max; } } location = /favicon.ico { rewrite (.*) /site_media/favicon.ico; } location = /robots.txt { rewrite (.*) /site_media/robots.txt; } location / { proxy_pass_header Server; proxy_set_header Host $http_host; proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Scheme $scheme; proxy_pass http://frontends; } } #include /usr/local/nginx/sites-enabled/*; } Thanks, Cata

  Read the article

• Newly configured MSSQL2008, TIME_WAIT but no ESTABLISHED?

  - by 3molo

  Windows 2008 R2, standard. No firewall locally on it. Newly setup because an old SQL2000 had two disks die (or could it be the raid controller?) at the same time. Luckily, I had fresh backups. The databases have been restored, and SP2 for SQL2008 applied. I can see various hosts trying to establish a session, but the (customer) sites does not work and I don't see the expected established sessions. A wireshark reveals a full three-way handshake. Since it's customer machines connecting, I cannot logon to them and restart application pools.. What on earth could be causing this? No. Time Source Destination Protocol Info 1 0.000000 1.2.5.127 1.2.6.133 TCP desktop-dna > ms-sql-s [SYN] Seq=0 Win=65535 Len=0 MSS=1380 SACK_PERM=1 Frame 1: 62 bytes on wire (496 bits), 62 bytes captured (496 bits) Ethernet II, Src: Cisco_31:5e:09 (00:26:0b:31:5e:09), Dst: Vmware_b7:00:05 (00:50:56:b7:00:05) Internet Protocol, Src: 1.2.5.127 (1.2.5.127), Dst: 1.2.6.133 (1.2.6.133) Transmission Control Protocol, Src Port: desktop-dna (2763), Dst Port: ms-sql-s (1433), Seq: 0, Len: 0 No. Time Source Destination Protocol Info 2 0.000123 1.2.6.133 1.2.5.127 TCP ms-sql-s > desktop-dna [SYN, ACK] Seq=0 Ack=1 Win=8192 Len=0 MSS=1460 SACK_PERM=1 Frame 2: 62 bytes on wire (496 bits), 62 bytes captured (496 bits) Ethernet II, Src: Vmware_b7:00:05 (00:50:56:b7:00:05), Dst: Cisco_31:5e:09 (00:26:0b:31:5e:09) Internet Protocol, Src: 1.2.6.133 (1.2.6.133), Dst: 1.2.5.127 (1.2.5.127) Transmission Control Protocol, Src Port: ms-sql-s (1433), Dst Port: desktop-dna (2763), Seq: 0, Ack: 1, Len: 0 No. Time Source Destination Protocol Info 3 0.000884 1.2.5.127 1.2.6.133 TCP desktop-dna > ms-sql-s [ACK] Seq=1 Ack=1 Win=65535 Len=0 And netstat TCP 1.2.6.133:1433 1.2.2.98:26895 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.2.98:26912 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.2.98:26918 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.2.98:26931 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.5.127:2736 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.5.127:2737 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.5.127:2738 TIME_WAIT 0 TCP 1.2.6.133:1433 1.2.5.127:2739 TIME_WAIT 0

  Read the article

• Group traffic shaping with traffic control?

  - by mmcbro

  I'm trying to limit the output bandwidth generated by an application with linux tc. This application sends me the source port of the request that I use has a filter to limit each user at a given downloadspeed. I feel that my setup could be managed way better if I had a better knowledge of linux tc. At the application level users are categorized as members of a group, each group have a limited bandwidth. Example : Members of group A : 512kbit/s Members of group B : 1Mbit/s Members of group C : 2Mbit/s When a user connects to the application, it retrieves the source port to the origin of the request from the user and sends me the source port and the bandwidth at which the user must be limited depending on group to which it belongs. With these informations I must add the appropriate rules so that the user (the source port in reality) is limited to the right bandwidth. If the user that connect isn't a member of any group it should be limited at a default bandwidth speed. I'm actually managing this by using a self made daemon that add or remove rules from when it receive a request from the application. With my little knowledge of tc I'm not able to limit other users (ones that aren't in a group, all others in fact) at a default speed and my configuration seems awful to me. Here is the base of my tc qdisc and classes : tc qdisc add dev eth0 root handle 1: htb tc class add dev eth0 parent 1: classid 1:1 htb rate 100mbps ceil 125mbps To classify a user at a given speed I have to add one subclass and then associate one filter to it : # a member of group A tc class add dev eth0 parent 1:1 classid 1:11 htb rate 512kbps ceil 512kbps # tts associated filter to match his source port tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 50001 flowid 1:11 # a member of group A again tc class add dev eth0 parent 1:1 classid 1:12 htb rate 512kbps ceil 512kbps # tts associated filter to match his source port tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 61524 flowid 1:12 # a member of group B again tc class add dev eth0 parent 1:1 classid 1:13 htb rate 1000kbps ceil 1000kbps # tts associated filter to match his source port tc filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 57200 flowid 1:13 I already know that a source port could be the same if its coming from a different IP address the thing is the application is behind a proxy so I don't have to manage any IP address in that situation. I would like to know how to manage the fact that for all other users (request/source port, whatever you name it) could be limited at a given speed each. I mean that each connection should be able to use at max 100kbit/s for example, not a shared 100kbit/s. I also would like to know if there is a way to simplify my rules. I don't know if it is possible to use only one class per group and associate multiple filters to the same class so each users could be handled by one class and not one class per user. I appreciate any advice, thanks.

  Read the article

< Previous Page | 689 690 691 692 693 694 695 696 697 698 699 700  | Next Page >