Search Results

Search found 21920 results on 877 pages for 'custom properties'.

Page 694/877 | < Previous Page | 690 691 692 693 694 695 696 697 698 699 700 701  | Next Page >

• Disable or remove filter driver for single HID device

  - by snoopen

  Running Windows XP in a corporate setting here. I have an issue where a filter driver is interfering with the functionality of different USB HIDs. For example graphics tablets do not respond while the filter driver is in place. I've also had the issue with foot pedals used with transcription software. My question is really two fold: A) what makes Windows use a filter driver on one HID but not another? B) when a filter driver is causing conflicts how can I disable it on the affected devices? Background I've previously narrowed down the issue to the filter driver by uninstalling the software (Funk Proxy Host) responsible for the filter driver. The software is a type of RDP we use here at work. (I might have even booted into safe mode and renamed the file, I forget). I believe the filter driver is present to disable or modify the use of the local keyboard and mouse while admin staff are assisting users. Either way I don't have the authority to just go uninstalling this software. As far as I can tell the software versions are the same, however I'm not sure if the device driver definitions are all the same as I don't know where these things would be located. To check for the presence of the filter driver I locate the hardware device in Device Manager, click Properties Driver tab Driver Details.... It shows up as ph32ihid.sys. Even though all machines are meant to have the same SOE and do have Funk Proxy Host installed I don't always have issues with the same HIDs. A few machines here the foot pedals without any issues. I've not had any machines work with the graphics tablet without uninstalling Funk software. Driver details I've just read up a bit more about filter drivers and found the drivers description in the registry under "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ProxyHostHIDFilter" There it's called "Kernel-mode HID filter driver for the Proxy Host". Presumably I could also disable it here but that would be system wide which is probably not desirable?

  Read the article

• SQL 2008 R2 replication error: The process could not connect to Distributor

  - by Lance Lefebure

  I have two servers running SQL 2008 R2 Standard, each with an instance named "MAIN". I have a small test database on my primary server (one table, 13 rows) that I want to replicate to a second server as a proof-of-concept for some larger databases that I want to replicate. I set up the primary server to be a publisher and distributor, and set the database to do transactional replication. I copied the data to the second server via a backup/restore, not via a snapshot (which I'll have to do with the larger databases due to database size and limited bandwidth). I followed the instructions here: http://gnawgnu.blogspot.com/2009/11/sql-2008-transactional-replication-and.html Now on the subscriber, I go under Replication / Local Subscriptions / Right click / Properties on my subscription to the DB. The status of the last synchronization shows a status of: "The process could not connect to Distributor 'PRIMARYSERVER\MAIN'." Data IS replicating from the primary to the secondary. Any record I add on the primary shows up on the secondary server within seconds. Is the Distributor part of the Snapshot system that I'm not using, or is it part of the transaction replication stuff? Thanks, Lance

  Read the article

• grub2 error : out of disk

  - by Nostradamnit

  Hi everyone, I recently install ArchBang on a machine with Ubuntu and XP. I ran update-grub from Ubuntu and it found the new install and created an entry. However, when I try to boot it, I get: error: out of disk error: you need to load kernel first I've tried several things, including adding a new entry in 40_custom, but nothing changes. Here are the entries I have: default found by update-grub ### BEGIN /etc/grub.d/30_os-prober ### menuentry "ArchBang Linux (on /dev/sda4)" { insmod part_msdos insmod ext2 set root='(hd0,msdos4)' search --no-floppy --fs-uuid --set 75f96b44-3a8f-4727-9959-d669b9244f2a linux /boot/vmlinuz26 root=/dev/sda4 rootfstype=ext4 ro xorg=vesa quiet nomodeset swapon initrd /boot/kernel26.img } menuentry "ArchBang Linux Fallback (on /dev/sda4)" { insmod part_msdos insmod ext2 set root='(hd0,msdos4)' search --no-floppy --fs-uuid --set 75f96b44-3a8f-4727-9959-d669b9244f2a linux /boot/vmlinuz26 root=/dev/sda4 rootfstype=ext4 ro xorg=vesa quiet nomodeset swapon initrd /boot/kernel26-fallback.img } ### END /etc/grub.d/30_os-prober ### custom entry in 40_custom based on various ideas found on the internets menuentry "ArchBang Linux (on /dev/sda4)" { insmod part_msdos insmod ext2 set root='(hd0,msdos4)' search --no-floppy --fs-uuid --set 75f96b44-3a8f-4727-9959-d669b9244f2a linux /boot/vmlinuz26 root=/dev/disk/by-uuid/75f96b44-3a8f-4727-9959-d669b9244f2a rootfstype=ext4 ro xorg=vesa quiet nomodeset swapon initrd /boot/kernel26.img } I think the problem has something to do with the sda4 not being mounted at boot-time... Thanks in advance for you help, Sam

  Read the article

• External HDD incorrectly detected as internal - how change to enable hot swap/eject?

  - by Sam

  Hi All, I have win 7 x64 Home Prem. The HDD is a seagate barracuda, 7200.7 ST3120827AS. 3.5", Serial: 3ms006n6, Firmware: 3.42 (no further updates) NexStar CX External case (drivers installed). I have three drives: WD320 with OS installed WD750 data storage (internal) seagate 120 (external) - connected via esata board connected to sata on motherboard (MSI p43 neo) Tried uninstalling HDD in device manager to no effect. Also the internal WD750 is detected as an external drive and win taskbar icon allows for it to be ejected (unlike the seagate). All drives are configured - Online, Simple, Basic, NTFS, Active, Primary Partition (except c drive). The seagate was previously used as a primary disk with XP operating system so I deleted the volume and created/reformatted (not quick). HDD is no longer "Active". But did not fix problem. Background Originally, I installed win 7 with the bios set to IDE and forgot to install the chipset drivers. Then I changed win 7 to install the AHCI drivers, changed the bios to AHCI and rebooted. Win 7 loaded drivers but WD HDD gave problems/crashed. I installed chipset drivers and latest intell storage matrix software thingie (in safe mode). Everything worked fine after that except for the problem of not corrrectly detecting the external drive] I have noticed that under the driver properties (and similarly in the registry) the two drives are configured differently (e.g. in driver details property capabilities for the WD the value is set to 0000006, CM_DEVCAP_REMOVABLE & EJECTSUPPORTED - whereas the seagate shows 0000080 & CM_DEVCAP_SURPRISEREMOVALOK). Any easy way to configure things? I tried physically swapping the sata connections on the mainboard without success So far I have found that a solution to my problem might be to perform some reg changes: http://superuser.com/questions/12955/how-do-i-remove-the-option-to-eject-sata-drives-from-the-windows-7-tray-icon

  Read the article

• Virtual Machine Network Services causes networking problems in Vista Enterprise 64 bit install

  - by Bill

  I have a Quad-core/8GB Vista Enterprise 64-bit (SP2) installation on which I installed Virtual PC 2007. I have a problem that is opposite of all that I found searching around the Internet--everybody has problems making network connections from their guest VM. When Virtual Machine Network Services is enabled in the protocol stack for my network card across a reboot, it causes access problems to the network. The amount of time to login in using a domain credentialed account is upwards of 3 minutes, then after reaching the desktop the network and sharing center shows that my connection to the domain is unauthenticated. Disabling and re-enabling the Virtual Machine Network Services (uncheck in network properties/apply/recheck/apply) fixes the problem. And as long as I have the VMNS disabled when I shutdown the restart runs smoothly. I just have to remember to enable after login and disable before shutdown. I have un-installed and re-installed Virtual PC 2007 multiple times with restarts between. The install consists of the SP1 + a KB patch for guest resolution fix. Any help would be greatly appreciated. Some additional information... At one point during my hairpulling and teethgnashing with this, I tried to ping my primary DC and observed some weird responses: (Our DC is 10.10.10.25, my dynamic IP was 10.10.10.203) Reply from 10.10.10.203, Destination host unreachable. Request timed out. Reply from 10.10.10.25: ... This is not consistently repeatable, but thought it might strike a chord with someone.

  Read the article

• How Would I Restrict a Linux Binary to a Limited Amount of RAM?

  - by Ken S.

  I would like to be able to limit an installed binary to only be able to use up to a certain amount of RAM. I don't want it to get killed if it exceeds it, only that that would be the max amount that it could use. The problem I am facing is that I am running an Apache 2.2 server with PHP and some custom code that a developer is writing for us. The problem is that somewhere in there code they launch a PHP exec call that launches ImageMagick's 'convert' to create a resized image file. I'm not privy to a lot of details to the project or the code, but need to find a solution to keep them from killing the server until they can find a way to optimize the code. I had thought that I could do this with /etc/security/limits.conf and setting a limit on the apache user, but it seems to have no effect. This is what I used: www-data hard as 500 If I understand it correctly, this should have limited any apache user process to a maximum to 500kb, however, when I ran a test script that would chew up a lot of RAM, this actually got up to 1.5GB before I killed it. Here is the output of 'ps auxf' after the setting change and a system reboot: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 5268 0.0 0.0 401072 10264 ? Ss 15:28 0:00 /usr/sbin/apache2 -k start www-data 5274 0.0 0.0 402468 9484 ? S 15:28 0:00 \_ /usr/sbin/apache2 -k start www-data 5285 102 9.4 1633500 1503452 ? Rl 15:29 0:58 | \_ /usr/bin/convert ../tours/28786/.…. www-data 5275 0.0 0.0 401072 5812 ? S 15:28 0:00 \_ /usr/sbin/apache2 -k start Next I thought I could do it with Apache's RlimitMEM setting, but get the same result of it not getting limited. Here is what I have in my apache.conf file: RLimitMEM 500000 512000 It wasn't until many hours later that I figured out that if the process actually reached that amount that it would die with an OOM error. Would love any ideas on how to set this limit so other things could function on the server, and all of them could play together nicely.

  Read the article

• Known USB 2.0 devices don't install driver, but must be manually forced

  - by Darragh

  When a known USB 2.0 device is plugged in and detected, it doesn't install the driver correctly but shows a Code 28 error and lists the device under "Other Devices" in Device Manager. When view properties of this device , it shows the following status; The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. To find a driver for this device, click Update Driver. When updating the driver manually and selecting the appropriate driver Windows doesn't believes it's the correct driver, but you can force the installation and it works! The other condition the driver will auto-install is when the same USB device is plugged into a USB 3.0 port. Power related issues are not also causing this as I have tried vi a Docking station, USB hub. etc.. Devices tried; Jabra Headset USB-Mass Storage Device (flash disk and ext HD) MS Wireless Keyboard & Mouse USB Ethernet controller (USB-MAC controller) This is on a laptop part of a Domain with Windows 7 Ent 7601, I am logged in as a local administrator. There isn't any Group Policies blocking not signed driver or whitelisted devices on the domain. Any suggestions please feel free

  Read the article

• How to correctly deploy Adobe Reader 9.1

  - by Ben Gillam

  Hi I have recently tried to deploy Adobe Reader 9.1 onto our network here. (SBS 2003 server and XP Workstations) I followed the instructions for the extraction of the installer and .msi and then creating a .mst transform file to set custom options. (Suppress EULA, dont create desktop icon etc) I then added the package to my deployment GPO applied the relevant .mst file and preceded to deploy accross the network. The software package is computer assigned to be installed prior to logon, to avoid user permissions issues. The package deploys correctly to computers and will run perfectly fine if you run from a shortcut, however when trying to view a pdf from within a web browser it fails with the following message. "The adobe acrobat/reader that is running can not be used to view PDF files in a web browser. Adobe Acrobat/Reader version 8 or 9 is required. Please exit and try again" I have found many pages on google refering to this problem, but none appear to be in relation the problems I have found. http :// kb2.adobe.com/cps/405/kb405461.html These fixes recommend correcting a registry entry (which i should mention is missing after the deployed installation. However this does not work. Switching off display in a browser - Seems to defeat the object of fixing the problem Removing old versions - There arent any. Trying with a different user - This affects all users of all privalige levels on all computers. On my workstation I uninstalled Acrobat Reader 9.1 then reinstalled manually using the same installation source files and it works fine. has anyone sucsessfully deployed AR9.1 on their domain and if so how? For the time being I have downloaded the older 8.1.3 release and deployed this in the same way which works fine, but would like to be using the up to date version. Thanks

  Read the article

• TEMP environment variable occasionally set incorrectly

  - by Roger Lipscombe

  Occasionally, I find my TEMP and TMP environment variables set to C:\Windows\TEMP. They should be set to %USERPROFILE%\AppData\Local\Temp, and are configured correctly in System Properties. This manifests itself as error messages like the following: ---> System.InvalidOperationException: Unable to generate a temporary class (result=1). error CS2001: Source file 'C:\Windows\TEMP\gb_pz65v.0.cs' could not be found error CS2008: No inputs specified ...which occurs in various .NET applications (in particular Visual Studio 2010 or SQL Server Management Studio). Alternatively, SQL Server Management Studio will report: Value cannot be null. Parameter name: viewInfo (Microsoft.SqlServer.Management.SqlStudio.Explorer) If I run PowerShell elevated, then $env:TEMP is set correctly. If I run PowerShell non-elevated, then it's not. I believe that it should be set correctly in both cases. If not, it's the wrong way round. The same is true for CMD.EXE. Rebooting fixes it, temporarily, until something breaks it again. Presumably something loaded into Explorer.exe is messing with its environment variables, but what? The values in the registry are correct, even while this is happening: HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment has TEMP = %SYSTEMROOT%\Temp HKCU\Environment has TEMP = %USERPROFILE%\AppData\Local\Temp By setting a breakpoint on shell32!RegenerateUserEnvironment, I'm able to trap it when it happens, but I still don't know why explorer.exe is reading the wrong environment variables. I can reproduce it consistently by broadcasting a WM_SETTINGCHANGE message (I wrote a one-line C++ program to do this). Watching the activity in Process Monitor shows that explorer.exe doesn't even look at HKCU\Environment. What is going on?

  Read the article

• Apache, Tomcat and mod_jk for load balancing

  - by pHk

  Hi guys. I've set-up a basic Apache (2.2.x) and Tomcat (6.0.x) set-up using mod_jk for load balancing using the worker.properties file. Preliminary testing seems to show that this works relatively well, and it was quite easy to set-up. However; the fact that it was so easy to set-up has got me a little worried. We're dealing with 100 - 300 concurrent users using the same web application (deployed on 2 or 3 Tomcat instances). I have done a little Googling and looking around on here and there seems to be more than 1 way to accomplish this (one example on here used a balancer:// style URL, which I've never seen before in an Apache config). For example, one question I ask myself is how reliable the load detection on mod_jk really is (Busyness, Session, Request, etc). In your experience, does this set-up prove to be reliable in real world scenarios? Any pointers on improvements, pit falls or interesting literature/articles? I've worked with Apache before, but am in no way an expert. Thanks in advance.

  Read the article

• Parallels 6 - Is It Just Me or Does It Run Really Slowly?

  - by 5arx

  I've been running Parallels since version 2 with great success. I use it as my .Net development environment and over the last few years have converted so many others to the Parallels/Mac way of doing Windows/.Net development that I feel I should be getting perks/gifts and/or freebies from Parallels Corporation ;-) A month or so ago I upgraded to version 6 and ... immediately wished I hadn't. I'm currently running it on a laptop - a 2009 MacBook Pro (13"/2.53Ghz/4GB) while my MacPros at work and home are still running v5. I have seen nothing in v6 that makes me want to upgrade the install on those. The general problem is performance - upon starting or suspending a vm (always Windows 7 Ultimate), OS X slows down, quite often freezing for a minute or two at a time. The performance of the vms themselves are fine, but for me the point of this set-up is to be able to do web-browsing, email checking etc. on the OS X side of things while doing the stuff that can only be done on Windows (Visual Studio, SQL Server tools) on Windows. I have been using Parallels for a while so at least feel like I know what I'm doing so at the moment I am heading towards forming an opinion that its Parallels thats to blame. I've tweaked and tweaked all the vm configuration properties but to no avail. Support emails to the company have all received replies - there are no documented case of the issue you mention. Has anyone else seen this problem and if so, have you found a fix?

  Read the article

• Smart card driven membership and door entry system

  - by Rob G

  I'm looking at putting in a smart card driven system at my local sports club (which doesn't have oodles of money), and since they're willing to pay for hardware, and I'm willing to do the technical setup, I was wondering if anyone had any experience in setting something like this up. Writing any software needed is not the problem, I've pretty much got that covered with various open source projects out there and custom code I'll write, but it's more the hardware side I'm not too sure about and I'm looking for advice from people out there. I'm sure there are numerous complications, but on the surface it looks fairly simple. I'd basically like to enable members to swipe/touch a smart card at the door to gain entry to the club, walk up to a touch screen PC and swipe/touch a card reader there to "login" to the system I create, which will allow them to book club facilities etc. I may even want that same card to then activate things like lights or music when they enter the room they've booked. Pretty Eutopian I know, but still, we'd like to get as close as we can. As I said, the software shouldn't be a problem, and on the hardware side, so far I'm looking at: All in one touch screen PC running Windows 7 or Ubuntu USB card reader (not sure which one to buy) Smart Cards (again, never bought these before) Door/lighting hardware that could be triggered (not sure here either) If anyone has any advice on implementing something like this - especially the items I'm not sure about above, and of course anything I've missed out that's crucial, I'd be most grateful. Recommended hardware that you've used for something like this would be fantastic!

  Read the article

• explanation of RAM specs, and what do I need for a Gaming rig

  - by ewok

  I am looking into upgrading my custom built PC's RAM. I use the machine mostly for gaming, but I don't really know a ton about RAM, so I wanted to ask a few questions. The research I've done tells me there is a negligible increase in speed for anything above 1600 MHz. is this true or is it worth the extra money to go higher? Other than drawing more power from the PSU, is there any real difference in performance with different voltages (1.5V vs 1.65V)? most of the kits I've found in the 2x4 1600 range have a CAS latency of 9 and timing of 9-9-9-24. For a significant increase in price (usually about 1.5x), I can get either 8 or 7 and lower timing. Is it worth the cost? What I am looking for here is someone to give a good explanation of what the different specs represent, and how that relates to the performance of the machine. Specifically, I'm looking for what specs I need to focus on for a good gaming rig. I am NOT looking for a "buy this, it's the best RAM" without an explanation of why. The information will be much more valuable as it will allow me to make my own informed decision. As they say, give a man a fish, he'll eat for a day. teach a man to fish, and he'll eat for the rest of his life.

  Read the article

• Distributed storage and computing

  - by Tim van Elteren

  Dear Serverfault community, After researching a number of distributed file systems for deployment in a production environment with the main purpose of performing both batch and real-time distributed computing I've identified the following list as potential candidates, mainly on maturity, license and support: Ceph Lustre GlusterFS HDFS FhGFS MooseFS XtreemFS The key properties that our system should exhibit: an open source, liberally licensed, yet production ready, e.g. a mature, reliable, community and commercially supported solution; ability to run on commodity hardware, preferably be designed for it; provide high availability of the data with the most focus on reads; high scalability, so operation over multiple data centres, possibly on a global scale; removal of single points of failure with the use of replication and distribution of (meta-)data, e.g. provide fault-tolerance. The sensitivity points that were identified, and resulted in the following questions, are: transparency to the processing layer / application with respect to data locality, e.g. know where data is physically located on a server level, mainly for resource allocation and fast processing, high performance, how can this be accomplished? Do you from experience know what solutions provide this transparency and to what extent? posix compliance, or conformance, is mentioned on the wiki pages of most of the above listed solutions. The question here mainly is, how relevant is support for the posix standard? Hadoop for example isn't posix compliant by design, what are the pro's and con's? what about the difference between synchronous and asynchronous opeartion of a distributed file system. Though a synchronous distributed file system has the preference because of reliability it also imposes certain limitations with respect to scalability. What would be, from your expertise, the way to go on this? I'm looking forward to your replies. Thanks in advance! :) With kind regards, Tim van Elteren

  Read the article

• Why can't I use my Bluetooth Headset with my laptop?

  - by Michael Haren

  I just received a new Plantronics M50 bluetooth headset. It works great with my phone, but I can't get it working with my laptop. What are the things I should be checking? Here's what I've done so far: It pairs successfully: It's not in multipoint mode--it's only paired to my laptop I've installed all available drivers from Plantronics and Dell I have no (!) in Device Manager (though I don't see the headset there either--would I?) I can "configure" the headset by double clicking on it: "Allow the computer to turn off this device to save power" is unchecked in the Bluetooth radio settings Apps that let me choose the playback/mic device only list my laptop, not the headset [UPDATE] I went into the Bluetooth device's properties and Checked "headset" under the services tab. This was successful but hasn't delivered any functionality as far as I can tell I'd like to use this headset for VOIP conferencing (Goto meeting, Gmail voice chat, G+ hangouts, Skype, etc.) and listening to music (iTunes). Where else should I be digging? Is it possible that this new headset is simply not compatible with computers (i.e. it's only compatible with phones)?

  Read the article

• Users and Groups management on 7 Home Premium

  - by AviD

  Recently upgraded the home pc from XP pro, to Windows 7 Home Premium. I'm looking for a solution for a few things that seem to be missing from this edition... Since Local Users and Groups is blocked on Home Premium, I can't figure out how to manage groups, or even do anything even slightly advanced to users (basically, create/group/picture is it). net localgroup, net users, net etc dont seem to work - getting "system error 5". While I'm on the topic, I cant activate (what was once) "Local Security Policy"... Looking for any help, advice, or even a new direction cuz things is differ'nt on Winnows7... To clarify, I'm looking to do some of the following, which were simply back in XP-land: remote user only (i.e. no local logon) Grant special privileges for specific user grant access to e.g. C$ share for specific remote user create custom groups for users, to be able to separate privileges of say, my wife's from my kids define quite specifically what each user can do (beyond just standard users) Harden OS (hmm, i guess maybe what i'm looking for is security hardening guide for 7...?)

  Read the article

• Menu command stuck on screen

  - by 280Z28

  For some reason, periodically when I select a menu command, the command label gets "stuck" on the screen and won't go away. I can close all open applications, including whichever one I was using when it got stuck, but it still won't go away. In the screenshot below, I opened an new instance of IE just to show how the label stays on top. The label was not created by this instance of IE. Edit with the source: The label that gets stuck is the first menu command I select in IE. If a label is already stuck, a new one does not get stuck (regardless of which instance(s) of IE are involved). Based on this knowledge, I now just open IE on my secondary monitor, carefully open the context menu so the Properties command is in the bottom corner, and click it. This is not a solution... The label never moves and is transparent to mouse input (if I click it, it's as if I clicked the item behind it). The label does not go away if I close all running applications. I haven't tried stopping services or closing system tray items like Live Mesh. The label does go away if I change the screen resolution and then change it back. Any ideas how I can stop this from happening? It's happened a half dozen times since yesterday and it's becoming quite disrupting to my work. Obviously I added the circle in MS Paint. That part isn't stuck. ;)

  Read the article

• iTunes Title Bar is Equal to the Location of the Library file?

  - by Urda

  I have never been able to get a clear answer on why the latest edition of iTunes does this. I have my entire iTunes library located in C:\itunes\ and the library data files inside C:\itunes\!library_info for backup purposes. However when version 9 of iTunes came out it went from having iTunes as the title, to !library_info. Anyway to get around this without moving my data files away? Annoying "feature" if that is what it is. Again Apple support and forums were of no help to me. Anyone have insight on this? System Info: Windows Vista x86 Ultimate, latest updates. iTunes Version 9.0.3.15 Screenshot: http://farm5.static.flickr.com/4072/4414557544_d0b25eb64c_o.jpg Flickr Page: http://www.flickr.com/photos/urda/4414557544/ UPDATE: I put a bounty on this, and would be open to hacking the registry or doing a custom config. Please help me fix my title bar!!! Update2: I would not like to move my library files out of itunes\!library_info to avoid them inter-mingling with my music library.

  Read the article

• Linux boot - stop the kernel switching to a new framebuffer mode clearing output

  - by Avio

  I'm working on an embedded system (based onUbuntu 12.04 LTS) and I'm customizing its kernel. I'm having some problem with upstart, mountall and plymouth. Nothing unsolvable I suppose, but the real problem is that I can't diagnose properly what's going on because the kernel (or maybe plymouth) changes the video mode in the middle of the boot process. This completely wipes entire lines of log and prevents any debugging of kernel misconfigurations. My Grub2 config seems to be ok with: GRUB_CMDLINE_LINUX="" GRUB_CMDLINE_LINUX_DEFAULT="acpi=force noplymouth" GRUB_GFXMODE=1024x768x32 GRUB_GFXPAYLOAD_LINUX=keep Here is some relevant output of lspci: 00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) And here is the relevant portion of my kernel configuration: CONFIG_AGP=y CONFIG_AGP_INTEL=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_DRM=y CONFIG_DRM_KMS_HELPER=y CONFIG_DRM_I915=y CONFIG_DRM_I915_KMS=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_VESA=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=640 CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y Every other custom/stock kernel boot fine with that Grub2 config. What I would like to have is a single flow of messages on a single console (retaining one screen resolution) from the bootup logo till the login prompt. Does anybody know what I have to tweak to achieve this?

  Read the article

• Regarding partitions for dual-booting Ubuntu with pre-existing Windows 7

  - by Shasteriskt

  I have zero actual experience with configuring disk partitions and the stuff I have read for the past few hours have been confusing me a bit, so please bear with me. First of all, I'd like to explain what I'm setting to achieve: Windows 7 with: C:\ Windows 7 (pre-existing installation) D:\ Data (Already exists and has files already) Ubuntu 11 - Does not exist yet, but I already have a LiveCD in hand. \root directory for Ubuntu \home on its own partition I plan \swap on its own partition with around 8GB Here is the current situation: I have a single 500 GB hard-disk with Windows 7 x64 installed, and the current partition schemes is as follows: System Reserved: 100 MB (Primary, Active) C: 100 GB - Where Windows 7 is installed (Primary) D: 365 GB - Where my files are located, LOTS of free space (Primary) Now, I would like to shrink my D: drive and create around 40 GB of unallocated disk space for the Ubuntu installation, but here what's confusing me a bit: I'm thinking I would create an extended partition and subdivide it into 3 logical partitions for the Ubuntu setup I had in mind. (If you think my setup is a bad idea, please let me know & why. I also hope you can suggest a better one...) I am aware that I can only have up to 4 primary partitions, or 3 primary partitions with 1 extended parition max. Now, does the System Recovery portion count as one primary partition? I'm really new to these things and it is totally unclear to me. In shrinking my D: drive using Windows 7's Disk Management tool, I would get an unallocated free space which I don't know how to make an extended partition from. It seems like I can only create a primary partition from it, not an extended one. How do I go about it? (I'd also like to note, if it is of any importance, that I am trying to avoid using the option to install Ubuntu alongside Windows, and much rather prefer using the custom install where I can specify which drives I wish to use and stuff. Somehow I feel its safer that way.)

  Read the article

• Driver denied access to PCI card

  - by Corin

  Alright, I asked this on StackOverflow (here) and they suggested trying ServerFault to get help on permissions. So here's the deal. We designed a custom PCI card and wrote the driver for it. It's been working for years without problems but now we encountered one particular installation were it doesn't work. The problem is that we cannot connect to the PCI to begin communication with it. We tried replacing the card and had the same problem. We had the motherboard replaced thinking the PCI slots were bad. That didn't help either. We tried the cards in a different computer and they all worked. So it seemed to be something specific to the computer. The Windows Device Manager indicates the device is working properly and seems to have all the correct driver info. We now have this troublesome computer back at the office for testing. With the help of some extra debug info in the driver we determined that we cannot connect because access is denied. Sounds like a permissions issue to me. I should note that we are logged into the system as a local administrator. So what configuration option in Windows can prevent access to a device?

  Read the article

• sharepoint crawl not indexing main site

  - by user22215

  Guys I'm having some strange search issues' going on with my main portal application. First off let me give you a little back ground on the problem web app. Our Sharepoint environment was originally set up by a consultant that did not follow best practices. She used one web app to house our companies' intranet site, ssp, and mysites. Since than I have provisioned a new ssp that I have segmented correctly I moved all of our other sites over to the new ssp with out any problems . However, I could not assign the main portal app to the new ssp since the portal app housed the ssp site collection. So I deleted the ssp site collection after that I deleted the ssp and assigned the portal app to my new ssp. Now this is where the problem starts when I attempt to crawl this application the crawl starts than stops 5 seconds later with a status of success also it reports that 1 item was successfully crawled. The funny thing is the main portal app has nearly 30000 items. I have tracked the problem down to the web app if I create a test web app than restore the content I have no problem crawling all 30000 items. Also all of my other web apps that use the same ssp have no problem completing crawls. I don't see anything in the ULS logs or server 2003's event viewer. Also I'm using a separate dedicated index server that's configured to crawl itself via host file configuration. I would like to fix this problem with out having to recreate our main portal site due to the fact that we have several custom code modifications where DLL's were registered to the IIS bin folder also I don't even want to get into the Silverlight mods that were done. Any help with this problem is much appreciated Same problem as minehttp://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/MS-SharePoint/Q_23885820.html

  Read the article

• central apache log analysis of many hosts

  - by Jason Antman

  We have 30+ apache httpd servers, and are looking to perform analysis on the logs both for historical trending and near "real time" monitoring/alerting. I'm mainly interested in things like error rates (4xx/5xx), response time, overall request rate, etc. but it would also be very useful to pull out more compute-intensive statistics like unique client IPs and user agents per unit of time. I'm leaning towards building this as a centralized collector/server/storage, and am also considering the possibility of storing non-apache logs (i.e. general syslog, firewall logs, etc.) in the same system. Obviously a large part of this will probably have to be custom (at least the connection between pieces and the parsing/analysis we do), but I haven't been able to find much information on people who have done stuff like this, at least at shops smaller than Google/Facebook/etc. who can throw their log data into a hundred-node compute cluster and run Map/Reduce on it. The main things I'm looking for are: - All open source - Some way of collecting logs from apache machines that isn't too resource-intensive, and transports them relatively quickly over the network - Some way of storing them (NoSQL? key-value store?) on the backend, for a given amount of time (and then rolling them up into historical averages) - In the middle of this, a way of graphing in near-real-time (probably also with some statistical analysis on it) and hopefully alerting off of those graphs. Any suggestions/pointers/ideas, to either "products"/projects or descriptions of how other people do this would be greatly helpful. Unfortunately, we're not exactly a new-age-y devops shop, lots of old stuff, homogeneous infrastructure, and strained boxes.

  Read the article

• NFS-shared file-system is locking up

  - by fredden

  Our NFS-shared file-system is locking up. Please feel free to ask any questions you feel relevant. :) At the time, there are a lot of processes in "disk sleep" state, and the load averages on our machines sky-rocket. The machines are responsive on SSH, but our the majority of our websites (apache+mod_php) just hang, as does our email system (exim+dovecot). Any websites which don't require write access to the file-system continue to operate. The load averages continue to rise until some kind of time-out is reached, but for at least 10-15 minutes. I've seen load averages over 800, yet the machines are still responsive for actions which don't require writing to the shared file-system. I've been investigating a variety of options, which have all turned out to be red-herrings: nagios, proftpd, bind, cron tasks. I'm seeing these messages in the file server's system log: Jul 30 09:37:17 fs0 kernel: [1810036.560046] statd: server localhost not responding, timed out Jul 30 09:37:17 fs0 kernel: [1810036.560053] nsm_mon_unmon: rpc failed, status=-5 Jul 30 09:37:17 fs0 kernel: [1810036.560064] lockd: cannot monitor node2 Jul 30 09:38:22 fs0 kernel: [1810101.384027] statd: server localhost not responding, timed out Jul 30 09:38:22 fs0 kernel: [1810101.384033] nsm_mon_unmon: rpc failed, status=-5 Jul 30 09:38:22 fs0 kernel: [1810101.384044] lockd: cannot monitor node0 Software involved: VMWare, Debian lenny (64bit), ancient Red Hat (32 bit) (version 7 I believe), Debian etch (32bit) NFS, apache2+mod_php, exim, dovecot, bind, amanda, proftpd, nagios, cacti, drbd, heartbeat, keepalived, LVS, cron, ssmtp, NIS, svn, puppet, memcache, mysql, postgres Joomla!, Magento, Typo3, Midgard, Symfony, custom php apps

  Read the article

• Windows service fails to start with local user until password is entered again in logon tab

  - by Nick

  Basically we have a service where we use a local account as its logon. it has all the proper permissions, and everything is working fine, service starts and runs and all is good. Then one day, after rebooting, the service fails to start. Logs show incorrect password. Our technicians resolve the issue by simply retyping the password into the "Log On" tab from the services.msc. Unfortunately we have not been able to root cause. I suspect that the password that is stored for the service is lost somehow. Does anyone know where the password hash might be stored so we can check it? The only activities that seem to be possibly related are patching with Microsoft security patches, but we have multiple servers running the same service, and we have never seen more than one at a time, and its usually a different one each time when this occurrs. I believe this to be the same issue as this: Windows service fails to start with custom user until started once with local user But i was unable to add comments, and its really old.

  Read the article

< Previous Page | 690 691 692 693 694 695 696 697 698 699 700 701  | Next Page >