Search Results

Search found 22000 results on 880 pages for 'worker process'.

Page 695/880 | < Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702  | Next Page >

• What are the most important aspects to consider when choosing a SAN for a small office virtualizatio

  - by Prof. Moriarty

  I am in the process of consolidating 6 physical servers running 6 different operating system flavors (don't ask) into two identical physical servers (Dell PowerEdge 2900), using the free VMware ESXi 4.0 platform. We will install an iSCSI SAN over a 1GbE network, and store all virtual machine images on the SAN. Each physical server would run 3 VMs, and in the case of a physical server failure, we would manually switch over the other 3. These are all internal servers, while important, they can tolerate some amount of downtime (say <1h) to keep cost and complexity associated with HA down. I now need to choose the SAN to be used for the setup, on a low budget. We currently have about 2TB of data, but of course I want to able to grow, do backups of VM snapshots on other drives and remove them to a different location, etc. So what I would like to know is: Which are the must have features for this setup, without which using a SAN is not worth it? We are mostly a Dell shop, so I have been looking at the EqualLogic PS4000E High Availability model. Any opinions, anecdotes, bad experiences with this model? (This is one of the few models which could accomodate our existing disks from the physical servers.) If you can recommend something that is not Dell, but it has better value, I would most definitely consider it. Caveats, things to look out for?

  Read the article

• Cross OS data recover question, USB drive involved.

  - by Moshe

  Here's the story: A MacBook had OS X 10.4 and Windows XP dual booting using rEFIt. Then the Windows partition gets corrupted and it won't boot. Presumably a virus. There were sensitive files there and those were successfully copied to a USB drive and then 10.5 was installed on the hard drive, formatting the drive in the process. The USB drive's contacts cracked and he data is lost from there, unless it can be resoldered. The issues is that there is too much solder there already. So, how can the data in question be recovered? The files were Microsoft Money (not the latest version) files for the Windows version of the program. Right now, only OS X is installed on the MacBook. Is there Mac based program that can recover the Windows data or am I better off trying to resolder the drive? Does anyone know how to best resolder a USB drive more than once, where the first solder is ther, but detached from the silicon? Also, what format (extension) are Microsoft Money files? In need of help!

  Read the article

• Problems with Windows 7 restore

  - by Chris Lively

  My WD raptor 150 failed with a nice clicking noise. So, I picked up a velociraptor 300 and popped it in. I had windows set to do a full system backup nightly, so I figured the recovery ought to go easily. Well, it isn't. It is currently stuck on a screen that says: "Windows is restoring your computer from the system image. This might take from a few minutes to a few hours" Below that is a rather large progress meter with maybe the first block filled in. Below that is a message that says "Restoring disk (C:)..." It's been that way for over an hour. The first time around, I gave up after 2 hours. I then booted into the system recovery options and went to a command prompt and ran a chkdsk on the new drive. It showed several file inconsistencies and not much else. I ran a chkdsk /f on it and tried again... Which is where I'm at now. I can't see that the restore process should take this long before. Any ideas? UPDATE After 10 hours, it's still on "Restoring disk (C:)" and the progress meter is at roughly 5%. I'm guessing at the 5% as there isn't an actual number or anything else that I can look at showing what it's actually doing. The backup contains roughly 120GB of data. How slow is windows restore?

  Read the article

• PC won't PXE boot to WDS/MDT with Dell Optiplex 755

  - by Moman10

  I am trying to set up a basic MDT solution. I have set one up in the past at a previous job and it worked flawlessly, however here I'm running into a problem and am having no luck getting around it. I've installed Windows Server 2012 and MDT 2013, along with adding on the WDS role. I haven't configured much outside of the defaults for WDS, basically just set PXE response to respond to all clients (and unchecked admin approval). This machine does not run a DHCP server. I looked on the DHCP scope of our DHCP server, it shows options 66/67 checked and the server name of the WDS server is in there as well. I didn't add this but I assume it was put on during the install process (I believe I had to manually make some adjustments at my old job for this). The PC I have is a Dell Optiplex 755. I have enabled the onbard NIC w/PXE boot option in BIOS and attempted to boot. I get a "TFTP...." error but nothing offering out a DHCP address like I'm used to. In my previous job it pretty much worked right out of the box. I've verified that PortFast is enabled on the port and I've tried a couple different PCs (but both are the same model, only model I have to work with). No matter what, I get the same error. The subnet the PC is in is a different subnet than where the WDS server is sitting, but there are IP helper statements on the switch and the PCs can get regular DHCP addresses just fine from the DHCP server, just doesn't seem to get offered out a PXE boot option. I don't know if the problem is a configuration with the server or the PC itself...but after a few days of Googling I'm running out of ideas. Does anyone have a good idea of something it may be?

  Read the article

• NetInstall working on some systems, not working on others

  - by cduruk

  Hi, I'm having an issue where my NetInstall setup works on some computers and fails on others. I am not able to diagnose the issue. I created an image of a Mac Mini and then created a NetRestore image using the System Image Utility found on Snow Leopard Server. NetBoot and NFS all seem to be working fine on the server, which is an XServe. Then I select the NetInstall image from the Startup Disk on a machine. On some of the machines, the process works as expected. On some of them, I see the globe icon blink a few times and then the system boots to the regular hard drive. I have captured the tracedump and the system.log logs from the server on both cases where NetInstall seems to work and fail. Here is the link that has all the logs http://gist.github.com/232232 The gist of the failure seems to be from the lack of BSDP DISCOVER in the failure but I'm not able to identify why that exactly is happening. I'd really appreciate any help on this issue.

  Read the article

• chkconfig creating service symlinks with the wrong order

  - by Robert

  On RHEL 6.3, I have a system service that should be starting after postgresql and httpd (order 64 and 85, respectively), but chkconfig always places it at order 50. I tried an experiment on a CentOS 6.0 virtual machine to make sure I understood the LSB stanza syntax. I created /etc/init.d/foo, owner root, permissions 755, with this text: ### BEGIN INIT INFO # Provides: foo # Required-Start: postgresql httpd # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Description: Foo init script ### END INIT INFO And then ran chkconfig --add foo. Result: /etc/rc5.d/S86foo is created, as expected. (The other runlevels are also as expected.) I repeated the exact same experiment on the RHEL machine, and it created /etc/rc5.d/S50foo instead. I can't see anything different between the two that would lead to different results. Both machines have postgresql and httpd starting at the same orders and runlevels. Any thoughts? I could just use # chkconfig: 2345 86 50, or manually rename the service symlinks to the correct order, but I'm trying to document an install process for later users, and I want to know how to do it right and understand why it's not working as expected.

  Read the article

• PC only boots from Linux-based media and won't boot from DOS-based media

  - by Xolstice

  I have this problem where the PC only seems to boot from a floppy disk or CD if it was created as a Linux-based bootable media. If it was created as a DOS-based bootable media the system just freezes at the starting point of the boot process. I originally asked this under question 139515 for CD booting only, and based on the given answers, I was under the impression the problem was with the CD-ROM drive; however, I have since installed a newly purchased CD-ROM drive and the same freezing occurs. This then made me try the DOS bootable floppy disk approach and I was quite surprised that it exhibited the same freezing problem. I then tried try a Linux bootable floppy and everything booted from it without any issues. As I mentioned in my original question, the PC was booting just fine from the DOS-based bootable CD, and then it suddenly decides to pull this freezing stunt. I can't remember if I changed anything in the BIOS settings that may I have caused the problem, but I am wondering if that could be the case - it is currently using the Award Module BIOS v4.60PGMA. Can anyone help?

  Read the article

• Fix Linux-made png file for use on Windows

  - by BGM

  There is a particular icon library that I really like. Now, I have downloaded the package that has the png files inside (I know the ico files are there, but I want the png files). However, about my Windows 7 computer tells me that about 1/3 of the png files are corrupt. I usually use XnView to view the files, and it won't display the "corrupt" files. I've tried other editors and viewers and I get the same issue. Now, the png package was originally designed for Linux to be an OS-icon-package for the entire system, so I figure the png files were built in Linux. So, is there a way I can "fix" the "corrupted" png files for my Windows 7 computer? Maybe when the files were created there was some bit that was off-colour or something? Any clues? [edit] I have read in this thread that the "corruption" could happen during the extraction process. I did all the extraction with 7-zip. It was a zip containing a tar. I will try another extractor, but I don't think it will make any difference.

  Read the article

• finding the best network latency between two countries

  - by Yoav Aner

  I know there are many tools to test for bandwidth and latency, but they all rely on having at least one host from which you can run those tests. I wonder whether there's an online source or some other way to guestimate the latency or speed between two countries (in general). For example, would a customer in Japan get lower latency if the server is located in Singapore or Australia? Is a user in India likely to get higher download speed from a server in the UK or in the US? Are there any online resources or some clever ways to answer those questions with a reasonable degree of accuracy? [UPDATE]: Thanks for the great suggestions from Raffael Luthiger. I didn't know about those looking glass servers. The submarine cable maps were also really cool to discover (Thanks to Jesper Mortensen). Also seems really wise if I could ask those network professional in the area for their experience, but obviously I don't have access to those. At least some of them are on SF :) However, I'm still a little unsure how to combine those resources to give me some measurements. This is the information I have: Two countries (A,B). I do have IP addresses of customers in country A (I can obtain those from the web server log files for example). Presumably I can find some looking glass servers in country B and run a trace to those IPs. What's the best measurements to use? Are there any scripts that help automate at least some of this process?

  Read the article

• Would an invalid certificate cause an 0x8004010F sync error?

  - by hydroparadise

  We just migrated from Exchange 2003 to 2007 which was a combo primary AD/DNS server and it has not gone smoothly. We are now down to getting a new certificate (a bureaucratic process thats out of my hands) and users getting the 0x8004010F sync issue. We are only using Outlook 2007 as our email client and the sync error appears exactly as so: 9:21:44 Synchronizer Version 12.0.6562 9:21:44 Synchronizing Mailbox '<User>' 9:21:44 Done 9:21:44 Microsoft Exchange offline address book 9:21:44 0X8004010F Now, I have read a number of technet articles on this issue anywhere from adding an A record in the DNS for autodiscover.domain.com to syncing the old OAD to the new OAD. In otherwords, theres lots of thing to try, but trial and error at this point might be hazardous to ther server's health and I am trying to narrow down the list of things to try. What has me thinking that the sync error could be related to the certificate is an event error message that says the following: Microsoft Exchange could not find a certificate that contains the domain name mail.ccufl.org in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector Internet Mail with a FQDN parameter of mail.ccufl.org. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key. I am not fully clear on how the Exchange Transport Service is related to Syncronization, but my hunch is that it probably not related to there not being a valid certificate. So to recap, would an invalid certificate cause an 0x8004010F sync error?

  Read the article

• Using psftp to upload and download files

  - by macha

  Hello I am trying to upload and download files from my desktop to my server. Now after some search I did download psftp. I used to use filezilla earlier, but I cannot install it on my desktop due to a few reasons. Since psftp (similar to putty) is just an executable for file transfer. So now after going through this link http://www.math.tamu.edu/~mpilant/math696/psftp.html. I understood that put and get are two commands I would use to download and upload files. Now when I logon to the server and say get filename, it actually is throwing back an error "local: unable to open filename". I tried that with other files too, and I end up getting the same error. The psftp.exe file is on my desktop. The process that I am using is I double click the .exe file open "servrname" cd /path/where/files/are get "filename" And I get this error "local: unable to open filename". Am I making a mistake or is it a problem with this executable?

  Read the article

• Are These Parts compatible?

  - by ell

  I have never assembled a PC before, although I have taken an old one apart and replaced a few parts in others here and there so I have (very) limited experience. I have been looking to make a pc and here are the parts I might buy: Foxconn P45AL Intel P45 (Socket 775) DDR2 Motherboard (with onboard sound I believe) Gigabyte GeForce GTX 460 OC 768MB GDDR5 PCI-Express Graphics Card Already have 2 1gb sticks of dual channel DDR2 memory Intel Core 2 Quad Q8400 LGA775 'Yorkfield' 2.66GHz 4MB-cache Processor Samsung SpinPoint F3 1TB SATA-II 32MB Cache Hard Drive Antec Dark Fleet Series DF10 Gaming Enclosure – Black I already have monitor, mouse, keyboard and DVD/CD drive Akasa Freedom Power 1000W Modular Power Supply I have never done this before so feel free to laugh at me for getting something obvious wrong, forgetting a vital component etc. but is all of this compatible? And have I gone overkill on the PSU, if so, please recommend one. Thanks in advance, ell. EDIT: Added PSU which I forgot to mention EDIT: I would be using this to surf the internet, write e-mails, chat, word process, play games such as team fortress 2 & spring rts (at highest graphics hopefully), some 3d modelling in blender, some opengl programming, and image editing in GIMP.

  Read the article

• tail -f and then exit on matching string

  - by Patrick

  I am trying to configure a startup script which will startup tomcat, monitor the catalina.out for the string "Server startup", and then run another process. I have been trying various combinations of tail -f with grep and awk, but haven't got anything working yet. The main issue I am having seems to be with forcing the tail to die after grep or awk have matched the string. I have simplified to the following test case. test.sh is listed below: #!/bin/sh rm -f child.out ./child.sh > child.out & tail -f child.out | grep -q B child.sh is listed below: #!/bin/sh echo A sleep 20 echo B echo C sleep 40 echo D The behavior I am seeing is that grep exits after 20 seconds , however the tail will take a further 40 seconds to die. I understand why this is happening - tail will only notice that the pipe is gone when it writes to it which only happens when data gets appended to the file. This is compounded by the fact that tail is to be buffering the data and outputting the B and C characters as a single write (I confirmed this by strace). I have attempted to fix that with solutions I found elsewhere, such as using unbuffer command, but that didn't help. Anybody got any ideas for how to get this working how I expect it? Or ideas for waiting for successful Tomcat start (thinking about waiting for a TCP port to know it has started, but suspect that will become more complex that what I am trying to do now). I have managed to get it working with awk doing a "killall tail" on match, but I am not happy with that solution. Note I am trying to get this to work on RHEL4.

  Read the article

• Grub hangs at "Starting up ..." when USB flash card reader is plugged in (on Ubuntu Hardy)

  - by Laurence Gonsalves

  I have a PC with Ubuntu Hardy installed. The machine boots fine unless my USB flash card reader (one of those N-in-1 readers by MediaGear) is plugged in at startup. If the reader is plugged in, the boot process proceeds as normal until it gets to the screen that says "Starting up ...". At that point it just hangs forever. To work around this I currently leave the reader unplugged when booting, and then plug it back in after I see that Ubuntu is actually starting. This is annoying though, especially when I reboot the machine (typically for updates), forget to unplug the reader, and walk away only to come back hours later to find the machine hung. My guess is that the presence of the reader is confusing Grub about where to find the kernel. The weird thing is that Grub is on the same drive as the kernel I want it to boot so clearly the drive is still readable even when the flash card reader is plugged in. Is there some way I can tell Grub to never go looking on the flash card reader?

  Read the article

• deploying war on tomcat fails to start

  - by Asghar

  i have a java application which uses JAX_WS when i deployed on my tomcat5 server . it is deployed successfully. but it fails to start SEVERE: WSSERVLET11: failed to parse runtime descriptor: java.lang.IllegalArgumentException: prefix cannot be "null" when creating a QName java.lang.IllegalArgumentException: prefix cannot be "null" when creating a QName at javax.xml.namespace.QName.<init>(xml-commons-apis-1.3.02.jar.so) at gnu.xml.stream.XMLParser.getAttributeName(libgcj.so.7rh) at com.sun.xml.ws.util.xml.XMLStreamReaderFilter.getAttributeName(XMLStreamReaderFilter.java:228) at com.sun.xml.ws.streaming.XMLStreamReaderUtil$AttributesImpl.<init>(XMLStreamReaderUtil.java:355) at com.sun.xml.ws.streaming.XMLStreamReaderUtil.getAttributes(XMLStreamReaderUtil.java:198) at com.sun.xml.ws.transport.http.DeploymentDescriptorParser.parseAdapters(DeploymentDescriptorParser.java:204) at com.sun.xml.ws.transport.http.DeploymentDescriptorParser.parse(DeploymentDescriptorParser.java:147) at com.sun.xml.ws.transport.http.servlet.WSServletContextListener.contextInitialized(WSServletContextListener.java:124) at org.apache.catalina.core.StandardContext.listenerStart(catalina-5.5.23.jar.so) at org.apache.catalina.core.StandardContext.start(catalina-5.5.23.jar.so) at org.apache.catalina.manager.ManagerServlet.start(catalina-manager-5.5.23.jar.so) at org.apache.catalina.manager.HTMLManagerServlet.start(catalina-manager-5.5.23.jar.so) at org.apache.catalina.manager.HTMLManagerServlet.doGet(catalina-manager-5.5.23.jar.so) at javax.servlet.http.HttpServlet.service(tomcat5-servlet-2.4-api-5.5.23.jar.so) at javax.servlet.http.HttpServlet.service(tomcat5-servlet-2.4-api-5.5.23.jar.so) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(catalina-5.5.23.jar.so) at org.apache.catalina.core.ApplicationFilterChain.doFilter(catalina-5.5.23.jar.so) at org.apache.catalina.core.StandardWrapperValve.invoke(catalina-5.5.23.jar.so) at org.apache.catalina.core.StandardContextValve.invoke(catalina-5.5.23.jar.so) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(catalina-5.5.23.jar.so) at org.apache.catalina.core.StandardHostValve.invoke(catalina-5.5.23.jar.so) at org.apache.catalina.valves.ErrorReportValve.invoke(catalina-5.5.23.jar.so) at org.apache.catalina.core.StandardEngineValve.invoke(catalina-5.5.23.jar.so) at org.apache.catalina.connector.CoyoteAdapter.service(catalina-5.5.23.jar.so) at org.apache.coyote.http11.Http11Processor.process(tomcat-http-5.5.23.jar.so) at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(tomcat-http-5.5.23.jar.so) at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(tomcat-util-5.5.23.jar.so) at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(tomcat-util-5.5.23.jar.so) at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(tomcat-util-5.5.23.jar.so) at java.lang.Thread.run(libgcj.so.7rh)

  Read the article

• How to setup NTFS ACL with Acces Based Enumeration

  - by Patrick Pellegrino

  We're in the process of migrating from Novell Netware to Windows 2K8 R2 infrastructure (AD, File server, print server... etc) My question is about ACL. While Netware and Windows are totally different, I want to be sure my thnking is good before screwing everything up! There's a scenario : F: | +-- DATA <= Shared as DATA with Access based enumeration | +-- Folder 1 +-- Team 1's Folder +-- Team 2's Folder ... In that case, by default, rights are herited from the F: to the deepest folders. What we want : Administrators group have full control top - down. From DATA, ABE list only folders that users have access. (ex. : I'm in group Team 2, I see Team 2's Folder). From what I understand, at DATA I remove all NTFS ACL to be herited (ex. Users Group), be sure to keep Administrators Group and SYSTEM user. After that, grant Full control (or any right needed) on each folder to Groups or Users that have to have access. Does I'm wrong ? Anything I should take care of ? Any help to my understanding will be very appreciated. Regards.

  Read the article

• Using a Level 2 switch as a core switch

  - by imtech

  I have a small user base of about 20 people on at a time and spiking up to about 80 people during peak times. Most people (80+%) are connected over our Aruba managed wireless system. We have a Windows Domain. We have 3 24-Port switches all connecting back to a central 48-port switch where additional access ports, firewall, servers, and wireless controller all centrally connect back to. It's a flat network with dumb switches. I'm in the process of upgrading our infrastructure. Cisco pricing for switches is pretty high for us so I've been looking at HP Procurves which seem to be within our budget range. I want to eventually make use of 802.1x, SNMP, QoS for possible VOIP upgrades, VLAN to separate guest VLAN from authenticated users, and other more advanced features. PoE would be nice but that's probably too expensive for us. I was thinking of having our core switch be a Procurve 2610 and the rest of our switches that centrally connect to it be Procurve 2510s. A true and full blown level 3 switch is way out of our price range but a 2610 seems to be good enough for us. The 2610 does static routing which ought to be good enough for us but I'm in unfamiliar territory so I'm looking for any gotchas. Also, should all the switches be 2610s or just the core switch? Do I even need the 2610, can I just go with all 2510s? I'm new to VLANs as well so I'm not sure what it is I need but I would like an affordable infrastructure that won't need replacing 2-3 years down the line because I choose a product that was lacking.

  Read the article

• Upgrade using downloaded $40 to Win8 x64 to blank SSD using only retail 32Bit XP install CD

  - by Ron

  Here is my situation. Purchase the downloadable $40 UPGRADE version of Windows 8. Install this upgrade to a new/blank SSD drive WITHOUT prior installation of retail version of XP/service pack 3 (prefered). I have the retail purchased 32Bit XP installation media and I also have a slipstreamed disc that contains service pack 2. This 32bit XP license was installed to a desktop PC that I have NOT used for years (its broke). Questions: Can I upgrade using the $40 download upgrade version from retail 32Bit XP to 64Bit Windows 8 directly to new SSD? without first installing 32bit XP to new SSD? If 32bit XP needs to be installed to perform the upgrade to 64bit Win 8 is service XP service pack 3 still available; likewise, if the boxed retail version of XP 32bit is required to be pre-installed to the new SSD before attempting the downoladed $40 upgrade to 64Bit Win, can a clean install be performed or is a undesired actual upgrade performed? From what I have read this is way to complicated. Ideally, I should be able to install $40 upgrade version Win 64bit directly to new/blank SSD, then during the license verification process enter both the Win8 64Bit upgrade key and retail XP 32bit key (over internet or phone call). Thanks Very Much In Advance for any insight!! Regards, Ron

  Read the article

• Unable to force Debian to do unattended install... libc6 wants interactive confirm

  - by JD Long

  I'm trying to create a script that forces a Debian Lenny install to install the latest version of CRAN R. During the install it appears libc6 is upgraded and the install wants interactive confirm that it's OK to restart three services (mysql, exim4, cron). This process HAS to be unattended as it runs on Amazon's Elastic Map Reduce (EMR) machines. But I'm running out of options. Here's a few things I've tried: This previous question appears to be exactly what I'm looking for. So I set up my install script as follows: # set my CRAN repos... yes, I know there's a new convention where to put these. echo "deb http://cran.r-project.org/bin/linux/debian lenny-cran/" | sudo tee -a /etc/apt/sources.list echo "deb-src http://cran.r-project.org/bin/linux/debian lenny-cran/" | sudo tee -a /etc/apt/sources.list # set the dpkg.cfg options per the previous SuperUser question echo "force-confold" | sudo tee -a /etc/dpkg/dpkg.cfg echo "force-confdef" | sudo tee -a /etc/dpkg/dpkg.cfg export DEBIAN_FRONTEND=noninteractive # add key to keyring so it doesn't complain gpg --keyserver pgp.mit.edu --recv-key 381BA480 gpg -a --export 381BA480 > jranke_cran.asc sudo apt-key add jranke_cran.asc sudo apt-get update # install the latest R sudo apt-get install --yes --force-yes r-base But this script hangs with the following request for input: OK, so I tried stopping the services using the following script: sudo /etc/init.d/mysql stop sudo /etc/init.d/exim4 stop sudo /etc/init.d/cron stop sudo apt-get install --yes --force-yes libc6 This does not work and the interactive screen comes back, but this time with only cron listed as the service that must be restarted. So is there a way to make libc6 just restart these services with no user input? Or is there a way to stop cron so it does not cause an interactive prompt? Maybe a creative option I've never thought of? Keep in mind that this system is brought up, some Hadoop code is run, and then it's torn down. So I can put up with side effects and bad behavior that we might not want in a production desktop machine or web server.

  Read the article

• How does it hurt to use Linux (Ubuntu) as a guest OS for all my tasks?

  - by sauparna

  I have a machine running Windows, where the disk has two partitions C (50 GB) and D (250GB). I do research in Information Retrieval and need to work with a large corpus (more than 50 GB) and in Linux. So if I want to install Linux on the existing system, keeping the Windows installation intact, will it be fine to run it in a virtual box? (say, QEMU, VMWare, etc.) An alternative is using Wubi. In that case the Linux installation has to be on drive C. Then, if I keep a small Linux installation (say 5GB) on C, and my corpus on D (mounted in Linux), how will it affect the performance of my programs which would be accessing the mounted Windows drive D. Is it feasible to use Linux this way? Which of the above is better if at all they are a way out? Note : Since my post in July 2010, I have been using and have tried several ways of maintaining a disk-image that I can mount in Linux. I had a 100GB qcow2 disk and a 100GB raw disk, both formatted to an EXT3 file system. I was mounting and connecting to the qcow2 disk using qemu-nbd. The problem was that every now and then, the connection to the disk would get lost and the running programs would throw disk I/O errors. The raw disk would mount and work fine as a loop mounted device, but when writing data to it, the mount.ntfs program would hog the CPU and the process would take an enormous amount of time. I was in fact running make on a piece of software located on this raw disk, and after a point of time make was waiting while mount.ntfs would show 100% CPU usage.

  Read the article

• Enabling mod_wsgi in Apache for a Django app on Gentoo

  - by hobbes3

  I installed Apache, Django, and mod_wsgi on Gentoo using emerge (on Amazon EC2). I know that the mod_wsgi is configured in /etc/apache2/modules.d/70_mod_wsgi.conf: <IfDefine WSGI> LoadModule wsgi_module modules/mod_wsgi.so </IfDefine> # vim: ts=4 filetype=apache So in my /etc/conf.d/apache I added the WSGI module: APACHE2_OPTS="-D DEFAULT_VHOST -D INFO -D SSL -D SSL_DEFAULT_VHOST -D LANGUAGE -D WSGI" But when I try to list the loaded module, mod_wsgi isn't listed. root ~ # apache2 -M | grep wsgi Syntax OK I also know that mod_wsgi isn't loading properly because the Apache configuration file doesn't recognize WSGIScriptAlias. By the way for Django to work I need to include a custom Apache configuration file. Where should I insert the line below? Include "/var/www/localhost/htdocs/mysite/apache/apache_django_wsgi.conf" I currently have that in the httpd.conf file but I feel like that file will get reseted whenever I upgrade Gentoo or related package. EDIT: it seems the mod_wsgi file is located in /usr/lib64/apache2/modules/mod_wsgi.so. Here is my detailed Apache settings: root@ip-99-99-99-99 /usr/portage/eclass # apache2 -V Server version: Apache/2.2.21 (Unix) Server built: Mar 7 2012 06:52:30 Server's Module Magic Number: 20051115:30 Server loaded: APR 1.4.5, APR-Util 1.3.12 Compiled using: APR 1.4.5, APR-Util 1.3.12 Architecture: 64-bit Server MPM: Prefork threaded: no forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/prefork" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="/usr" -D SUEXEC_BIN="/usr/sbin/suexec" -D DEFAULT_PIDLOG="/var/run/httpd.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_LOCKFILE="/var/run/accept.lock" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="/etc/apache2/mime.types" -D SERVER_CONFIG_FILE="/etc/apache2/httpd.conf"

  Read the article

• need advice on data center move, communication with both facilities during transition

  - by Brian Roden

  We are beginning the process of moving to a new facility. Office and warehouse operations will both be moving, and we must get shipping operations up and running at the new location while continuing to ship from the old location. Our contract with some third-party warehouse tenants requires two business day turnaround (only weekends and holidays excluded), so we can't have major downtime during the move. We would like to keep our 172.16.60/61.xxx internal address space in use throughout the move. Is it possible to keep using this same internal range, and have our existing WatchGuard Firebox 520 and whatever router we get for the other location (preferably the same model) just treat both locations as one network, leaving our host IPs the same throughout the move? Renumbering the servers when they move isn't a big deal, but our wireless terminals for order picking in the warehouse have fixed IPs (and a fixed IP, non-DNS reference to the host they speak with) and would be a massive undertaking to reconfigure when the servers move (each device would have to be reconfigured at least 2 times -- some when we start using them in the new building and the host is still here, all of them in both locations when the host moves to the new building, and the rest when they finally make the move to the new building). We're trying to avoid that if possible.

  Read the article

• Permissions denied on apache rewrite module virtual host configuration

  - by sina

  All of a sudden I keep getting "Permissions denied" on apache 2 virtualhost once we moved it to its own conf file. I have tried all the suggestions I have found here but none work. Please can someone tell me what I am doing wrong? Thanks! <VirtualHost *:80> DocumentRoot "/var/www/mm" <Directory "/var/www/mm"> Options +Indexes +MultiViews +FollowSymLinks AllowOverride all Order deny,allow Allow from all AddType text/vnd.sun.j2me.app-descriptor .jad AddType application/vnd.rim.cod .cod </Directory> Alias /holdspace "/var/www/mm/holdspace" RewriteLogLevel 9 RewriteLog "/var/log/httpd/rewrite.log" RewriteEngine on # 91xx RewriteCond %{HTTP_USER_AGENT} BlackBerry.9105 RewriteRule ^/download/(.*) /holdspace/bb6-360x480/$1 [L] # 92xx RewriteCond %{HTTP_USER_AGENT} BlackBerry.9220 RewriteRule ^/download/(.*) /holdspace/bb5-320x240/$1 [L] Errors in error.log: [Wed May 28 12:44:58 2014] [error] [client 197.255.173.95] (13)Permission denied: access to /download/eazymoney.jad denied [Wed May 28 12:44:58 2014] [error] [client 197.255.173.95] (13)Permission denied: access to /error/HTTP_FORBIDDEN.html.var denied [Wed May 28 12:44:59 2014] [error] [client 197.255.173.95] (13)Permission denied: access to /favicon.ico denied [Wed May 28 12:44:59 2014] [error] [client 197.255.173.95] (13)Permission denied: access to /error/HTTP_FORBIDDEN.html.var denied [Wed May 28 12:44:59 2014] [error] [client 197.255.173.95] (13)Permission denied: access to /favicon.ico denied [Wed May 28 12:44:59 2014] [error] [client 197.255.173.95] (13)Permission denied: access to /error/HTTP_FORBIDDEN.html.var denied Errors in rewrite.log: 197.255.173.95 - - [28/May/2014:12:46:01 +0100] [41.203.113.103/sid#7fe41704ca28][rid#7fe417123378/initial/redir#1] (3) applying pattern '^/download/(.*)' to uri '/error/HTTP_FORBIDDEN.html.var' 197.255.173.95 - - [28/May/2014:12:46:01 +0100] [41.203.113.103/sid#7fe41704ca28][rid#7fe417123378/initial/redir#1] (3) applying pattern '^/download/(.*)' to uri '/error/HTTP_FORBIDDEN.html.var' Apache Configuration file: ServerTokens Prod ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 60 KeepAlive Off MaxKeepAliveRequests 100 KeepAliveTimeout 15 <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 </IfModule> <IfModule worker.c> StartServers 4 MaxClients 300 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> Listen 80 LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_alias_module modules/mod_authn_alias.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule ldap_module modules/mod_ldap.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule substitute_module modules/mod_substitute.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule cgi_module modules/mod_cgi.so LoadModule version_module modules/mod_version.so Include conf.d/*.conf User apache Group apache ServerAdmin root@localhost ServerName sv001zma002.africa.int.myorg.com UseCanonicalName Off DocumentRoot "/var/www/html" <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory "/var/www/html"> Options FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> <IfModule mod_userdir.c> UserDir disabled </IfModule> DirectoryIndex index.html index.html.var AccessFileName .htaccess <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy All </Files> TypesConfig /etc/mime.types DefaultType text/plain <IfModule mod_mime_magic.c> MIMEMagicFile conf/magic </IfModule> HostnameLookups Off ErrorLog logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log combined ServerSignature Off TraceEnable Off Alias /icons/ "/var/www/icons/" <Directory "/var/www/icons"> Options MultiViews FollowSymLinks AllowOverride None Order allow,deny Allow from all </Directory> <IfModule mod_dav_fs.c> DAVLockDB /var/lib/dav/lockdb </IfModule> ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" <Directory "/var/www/cgi-bin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable Charset=UTF-8 AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ DefaultIcon /icons/unknown.gif ReadmeName README.html HeaderName HEADER.html IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW ForceLanguagePriority Prefer Fallback AddDefaultCharset UTF-8 AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl AddHandler type-map var AddType text/html .shtml AddOutputFilter INCLUDES .shtml ProxyErrorOverride On Alias /error/ "/var/www/error/" <IfModule mod_negotiation.c> <IfModule mod_include.c> <Directory "/var/www/error"> AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en es de fr ForceLanguagePriority Prefer Fallback </Directory> ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var </IfModule> </IfModule> BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4\.0" force-response-1.0 BrowserMatch "Java/1\.0" force-response-1.0 BrowserMatch "JDK/1\.0" force-response-1.0 BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully ErrorDocument 400 "Bad Request"

  Read the article

• Exclude list of specific files in wget

  - by nanker

  I am trying to download a lot of pages from a website on dial-up and it can be brutally slow. I have almost got the perfect wget command, but because I'm downloading pages from the same site wget wastes times downloading the same standard images for each page. If I know the name of the default page images, is there any way to have wget ignore and thus avoid downloading those for each and every page? Here is an example of one of the wget commands that my shell script generates into another shell script to download all of the pages: mkdir candy-canes-on-the-flannel-board-in-preschool cd candy-canes-on-the-flannel-board-in-preschool wget -p -nd -A jpg,html -k http://www.teachpreschool.org/2011/12/candy-canes-on-the-flannel-board-in-preschool/ wget -c --random-wait --timeout=30 --user-agent="Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.3) Gecko/2008092416 Firefox/3.0.3" http://www.teachpreschool.org/2011/12/candy-canes-on-the-flannel-board-in-preschool/ -O "candy-canes-on-the-flannel-board-in-preschool" rm Baby-and-Toddler.jpg Childrens-Books.jpg Creative-Art.jpg Felt-Fun.jpg Happy_Rainbow-e1338766526528.jpg index.html Language-and-Literacy.jpg Light-table-Button.jpg Math.jpg Outdoor-Play.jpg outer-jacket1-300x153.jpg preschoolspot-button-small.jpg robots.txt Science-and-Nature.jpg Signature-2.jpg Story-Telling.jpg Tags-on-Preschool.jpg Teaching-Two-and-Three-Year-olds.jpg cd ../ Now I realize the script is not likely as savvy as it could be but it is doing what I need at the moment except that you can see from the rm command that I would just like to prevent wget from downloading the files in the first place if possible. I almost forgot to mention, there are two wget commands and that is because the first one downloads the page as index.html and for some reason it does not open in my browser, however, when I open it and look at it in vim all of the page's content is there, so I am not sure why it does not open. But if I just issue the second wget command as it is then that page, same file really with an alternate name, opens up fine. Something that if I could fix would also help to streamline the process.

  Read the article

• What is causing sudden freezing during running real-time program?

  - by Trevor Boyd Smith

  So I run a high intensive (CPU/GPU) real-time program. During normal execution suddenly everything freezes for 1-4 seconds. I opened "Process Explorer" in the background to help gain insight and maybe identify something. Here is what the CPU/GPU graphs looks like when I align them in time: Notice the 4 distinct drops in both the CPU/GPU. You can see that it goes from some sort of positive CPU/GPU usage to almost zero. These drops in the graph align with when the real-time program suddenly freezes. How do I find what is causing these sudden drops? NOTE: When you put your mouse over the graph it tells you the time, accurate to the second, for where your cursor is. Maybe this mouse over feature could be helpful in some way (e.g. what if you had a log of all processes every 100ms). EDIT: The real-time program is a video game and so I can't watch some sort of instrumentation while the video game is running. I need a solution that let's you look back in time somehow to see what was happening when the slow down occurred. EDIT: RE - Recording Data vs using real-time monitor: So the windows performance recorder is for some reason not recording what I expect it to record. So I switched to using "perfmon" and then opening it's "resource monitor". RE - Setting it up so I can view real-time monitor: In the video game I set it to spectate and then put the video game in "windowed" mode so that I can view the real time display that Resource Monitor has. Now that I can get semi-real time (only once per second... how do you get more than once per second?) I started looking at the various real time data readouts. Getting to the cause: I noticed a strong correlation in high disk IO and low CPU usage (which is also seen by having in-game freezing). How do you use resource monitor to find out who is doing all this offending disk IO?

  Read the article

< Previous Page | 691 692 693 694 695 696 697 698 699 700 701 702  | Next Page >