Search Results

Search found 29317 results on 1173 pages for 'device control'.

Page 696/1173 | < Previous Page | 692 693 694 695 696 697 698 699 700 701 702 703  | Next Page >

• Connected to wireless, but no internet access

  - by boogaloo

  After installing Ubuntu 12.04 a week ago wireless internet had been working fine. It stopped working yesterday, however, and I'm at a loss for what to do even after scouring replies to similar posted problems. I have tried using Google's public DNS and turning off proxy settings on Firefox. I have used nm-tool and lshw to make sure my wireless device and driver are connected. If anyone can help me resolve this issue I would be extremely grateful! @kregerjd $ ping -c3 www.google.com ping: unknown host www.google.com @Alaa: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 $ ping -c4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data From 192.168.1.104 icmp_seq=1 Destination Host Unavailable From 192.168.1.104 icmp_seq=2 Destination Host Unavailable --- 192.168.1.1 ping statistics --- 4 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2998ms pipe 4

  Read the article

• Windows 8 and Cisco AnyConnect client issue

  - by Enrique Lima

  As many of us are doing these days, I have fully moved to Windows 8 on my PCs (laptops and desktops).  And in my role as a consultant I work with many clients, many of them use different vpn technologies.  While pretty much every single vpn client I had installed needed a trick or two to work, well Cisco’s AnyConnect vpn client had some issues.  Installation went well, no problem there.  The problem appeared when I attempted to connect, as I received the following message: Pretty clear what the issue is, right? right??!!?? Doing a bit of research (Google knows!), I cam across the following fix: Using our new favorite shortcut:  Windows Key + X Then Run > regedit. We then Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\vpnva From the image you can tell there are additional characters in the DisplayName that interfere with the device being able to be correctly identified. This is what it looks like originally. We will remove those characters so it looks more like: Close all open windows and attempt your connection.

  Read the article

• Using a Vertex Buffer and DrawUserIndexedPrimitives?

  - by MattMcg

  Let's say I have a large but static world and only a single moving object on said world. To increase performance I wish to use a vertex and index buffer for the static part of the world. I set them up and they work fine however if I throw in another draw call to DrawUserIndexedPrimitives (to draw my one single moving object) after the call to DrawIndexedPrimitives, it will error out saying a valid vertex buffer must be set. I can only assume the DrawUserIndexedPrimitive call destroyed/replaced the vertex buffer I set. In order to get around this I must call device.SetVertexBuffer(vertexBuffer) every frame. Something tells me that isn't correct as that kind of defeats the point of a buffer? To shed some light, the large vertex buffer is the final merged mesh of many repeated cubes (think Minecraft) which I manually create to reduce the amount of vertices/indexes needed (for example two connected cubes become one cuboid, the connecting faces are cut out), and also the amount of matrix translations (as it would suck to do one per cube). The moving objects would be other items in the world which are dynamic and not fixed to the block grid, so things like the NPCs who move constantly. How do I go about handling the large static world but also allowing objects to freely move about?

  Read the article

• Speed up ADF Mobile Deployment to Android with Keystore

  - by Shay Shmeltzer

  As you might have noticed from my latest ADF Mobile entries, I'm doing most of my ADF Mobile development on a windows machine and testing on an Android device. Unfortunately the Android/windows experience is not as fast as the iOS/Mac one. However, there is one thing I learned today that can make this a bit less painful in terms of the speed to deploy and test your application - and this is to use the "Release" mode when deploying your application instead of the "Debug" mode. To do this you'll first need to define a keystore, but as Joe from our Mobile team showed me today, this is quite easy. Here are the steps: Open a command line in your JDK bin directory (I just used the JDK that comes with the JDeveloper install). Issue the following command: keytool –genkey –v –keystore <Keystore Name>.keystore –alias <Alias Name> -keyalg RSA –keysize 2048 –validity 10000 Both keystore name and alias names are strings that you decide on. The keytool utility will then prompt you with various questions that you'll need to answer. Once this is done, the next step is to configure your JDeveloper preferences->ADF Mobile to add this keystore there under the release tab:  Then for your application specific deployment profile - switch the build mode from debug to release. The end result is a much smaller mobile application (for example from 60 to 21mb) and a much faster deployment cycle (for me it is about twice as fast as before).

  Read the article

• Cannot get temperatures in Dell Studio 1558

  - by Athul Iddya

  I could never get proper temperatures on my Dell Studio 1558. lm-sensors and acpi give wrong readings. The output of sensors is, $ sensors acpitz-virtual-0 Adapter: Virtual device temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) acpi -V gives me, $ acpi -V Battery 0: Full, 100% Battery 0: design capacity 414 mAh, last full capacity 369 mAh = 89% Adapter 0: on-line Thermal 0: ok, 0.0 degrees C Thermal 0: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 0: trip point 1 switches to mode passive at temperature 95.0 degrees C Thermal 0: trip point 2 switches to mode active at temperature 71.0 degrees C Thermal 0: trip point 3 switches to mode active at temperature 55.0 degrees C Thermal 1: ok, 26.8 degrees C Thermal 1: trip point 0 switches to mode critical at temperature 100.0 degrees C Thermal 1: trip point 1 switches to mode active at temperature 71.0 degrees C Thermal 1: trip point 2 switches to mode active at temperature 55.0 degrees C Cooling 0: LCD 0 of 15 Cooling 1: Processor 0 of 10 Cooling 2: Processor 0 of 10 Cooling 3: Processor 0 of 10 Cooling 4: Processor 0 of 10 Cooling 5: Fan 0 of 1 Cooling 6: Fan 0 of 1 I suspect even hddtemp gives bogus readings as its always at 46 $ sudo hddtemp /dev/sda /dev/sda: ST9500420AS: 46°C I have gone through some bug reports and some used to have the same problem after resuming from suspend. But I always have this problem. I had updated to the latest BIOS from Windows a couple of weeks ago, will updating from Ubuntu change anything? CORRECTION: hddtemp's readings do change. Its now at 45.

  Read the article

• Easter eggs as IP protection in software

  - by Simon

  I work in embedded software, and for some reason, management wants to hide an Easter egg as means of IP protection. They call it a watermark, and since our software interact with the video preview feed (the image displayed on a screen before you take a photo), they want me to implement a trigger which will react to some unusual video input (a video konami code like dark - bright - dark - bright - whatever). When this trigger fires, something strange happens (which is outside of the normal behavior of the software). The goal is to check whether our software is included in a device. Does it sound like a good idea? I have many argument against this move: What if the konami code is too sensitive and user triggers it? Does this kind of watermark have any legal value? What if this "feature" is discovered by the client? The performance penalty should be very small, since the soft run on small devices. I am the one developping this trigger. If things go wrong, what is my responsibility? What is your opinion about this method? I can't find a link, but I remember seeing an answer on this site suggesting that putting Easter eggs for protection purpose was a good idea. Has anyone tried it with good results?

  Read the article

• Player sprite moving slower on iPhone 4

  - by nvillec

  I just finished getting movement/jump animation for a player sprite in Xcode using Cocos2D. The basic movement algorithm is a timer that updates every 0.01 sec, changing the sprite position to (sprite.position.x + xVel, sprite.position.y + yVel). Each time a movement button is tapped, the appropriate velocity (initialized to 0) is changed to whatever speed I choose, then a stop movement button returns the velocity to 0. It's not an ideal solution but I'm very new at this and stoked to at least have that working with little help from the internet. So I may not have explained that perfectly, but it is in fact working to my satisfaction in Xcode's iPhone Simulator, however when I build it for my device and run it on my phone, the sprite's movement speed is noticeably slower than in Xcode. At first I thought it must have to do with the resolution of the iPhone 4, making the sprite's movement path twice as long, but I found that if I pull up the multitask bar, then return to the app the speed will sometimes jump back to normal. My second theory was that the code is just inefficient and is bogging the processes down, but I would see this reflected in the frame rate wouldn't I? It stays at 59-60 the whole time, and the spritesheet animation runs at the correct speed. Has anyone experienced this? Is this a really obvious issue that I'm completely missing? Any help (or tips for optimizing my approach to movement) would be much appreciated!

  Read the article

• UDF Partition reported full when it is not

  - by Capt.Nemo

  I was using these instructions to setup an external hard disk with udf. I have been able to setup a multi-partition system using those instructions, but I seem to have hit a wall, where the partition is reported as full while writing to the disk. Every other tool available to me reports it as free. Relevant lshw output Here's a screenshot showing the disk: Both the output of df and the file manager (caja) report the disk as free. Filesystem Size Used Avail Use% Mounted on /dev/sda9 9.0G 7.6G 910M 90% / udev 974M 12K 974M 1% /dev /dev/sda1 50G 47G 295M 100% /media/Data /dev/sda6 49G 41G 5.9G 88% /home /dev/sda2 155G 127G 29G 82% /media/Entertainment /dev/sda8 14G 13G 516M 96% /media/Stuff /dev/sdb2 120G 1.9G 112G 2% /media/3c887659-5676-4946-875b-b797be508ce7 /dev/sdb3 11G 2.6G 7.7G 25% /media/108b0a1d-fd1a-4f38-b1c6-4ad1a20e34a3 /dev/sdb1 802G 34G 768G 5% /media/disk I seem to have hit a wall near the 35GB mark. Despite being shown as 35gb/860gb used everywhere, the following happens on a write attempt: [2017][/media/Dory]$ echo D>>echo bash: echo: write error: No space left on device Writing byte by byte, the maximum I can take it to is 34719248K. The most weird part is that on mounting it Windows, Windows can write to the disk easily, and the writes are being read fine back in Ubuntu. However, the used-bytes remains at 34719248K in Ubuntu (It goes higher on Windows, however).

  Read the article

• Can't mount USB devices, shut down etc. as a user

  - by Alok

  I tried gnome3 and gnome3-staging ppas to test running Gnome 3.8. After a while I decided that Gnome 3.8 wasn't for me, so I did a ppa-purge of both the ppas. As described in gnome3-staging ppa page, I also did: $ sudo apt-get purge libpam-systemd $ sudo apt-get install libpam-xdg-support The trouble is, I can't mount my external USB device anymore. When I try to mount it as a user, it fails: $ udisks --mount /dev/sdc1 Mount failed: Not Authorized I am logged in an XFCE session, but the same thing happens in a fallback Gnome session, or from a Unity session. Also, in XFCE, "suspend" and "shut down" menus are grayed out. I can't also open synaptic package manager from XFCE menus (sudo synaptic works). After a lot of searching, it seems like it is a policykit issue. I see the following in my ~/.xsession-errors: (polkit-gnome-authentication-agent-1:5805): polkit-gnome-1-WARNING **: Unable to determine the session we are in: No session for pid 5805 PID 5805 doesn't exist. If I try to start polkit-dnome-authentication-agent-1 from an xterm, I get the same error (different PID): $ /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 ... (polkit-gnome-authentication-agent-1:15971): polkit-gnome-1-WARNING **: Unable to determine the session we are in: No session for pid 15971 (the ... lines are warnings from GTK about missing css files etc.). polkitd is running: $ pidof polkitd 1495 Is there something I am missing?

  Read the article

• Offset Forward vector of object based on Rotation

  - by Taylor

  I'm using the Bullet 3D physics engine in a iOS application running openGL ES 1.1 Currently I'm accepting info from the gyroscope to allow the user to "look around" a 3d world that follows a bouncing ball (note: it only takes in the yaw to look around 360 degrees). Im also accepting information from the accelerometer based on the tilt to push the ball. As of right now, to move forward, the user tilts the devise forward (using the accelerometer); to move to the right, the user tilts the devise to the right and so on. The forward vector is currently along it's local Z-axis. The problem is that I want to change the ball bounce based on where the user has changed the view. If I change the view, the ball bounces in the fixed direction. I want to change the forward facing direction so that when a user changes the view (say to the look at the right of the world, the user rotates the device), tilting the devise forward will result in a forward force in that direction. Basically, I want the forward vector to take the rotation into consideration. Sorry if I didn't explain the issue well enough, its kind of confusing to write down.

  Read the article

• how to make a continuous machine gun sound-effect

  - by Jan

  I am trying to make an entity fire one or more machine-guns. For each gun I store the time between shots (1.0 / firing rate) and the time since the last shot. Also I've loaded ~10 different gun-shot sound-effects. Now, for each gun I do the following: function update(deltatime): timeSinceLastShot += deltatime if timeSinceLastShot >= timeBetweenShots + verySmallRandomValue(): timeSinceLastShot -= timeBetweenShots if gunIsFiring: displayMuzzleFlash() spawnBullet() selectRandomSound().play() But now I often get a crackling noise (which I assume is when two or more guns are firing at the same time and confuse the sound-device). My question is whether A) This a common problem and there is a well-known solution, maybe to do with the channels or something, or B) I am using a completely wrong approach to the task. I had a look at some sound-assets for other games and they used complete burst with multiple shots. I suppose I could try that, but I would like to have organic little hickups in the gun-fire (that's what the random value is for) to make the game more gritty and dirty. I am using Panda3D, but I had the exact same problem in PyGame and SDL. [edit] Thanks a lot for the answers so far! One more problem with faking it though: Now how do I stop the sound? Let's say I have an effect with 5 bangs... *bang* *bang* *bang* *bang* *bang* And I magically manage to loop it so that there's no gap or overlap if the player fires more than 5 shots. Now, what do I do if the player stops firing halfway through the third bang? How do I know how long to keep playing the sample so that the third bang is completed and I can start playing the rumbling echo of the last shot? Of course I can look up the shot/pause timing of that sound-sample and code accordingly, but it feels extremely hacky.

  Read the article

• Sound not working after installing PCI video card and then removing it

  - by bakhshu

  I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

  Read the article

• Applications: Some more marble fun!

  - by TechTwaddle

  Well, yesterday night I was watching a tutorial on XNA when I came across this neat little trick. It was a simple XNA application with a Windows Phone logo in it and whenever the user clicked on the device the logo would move towards the click point, and I couldn't resist experimenting with the marble (; The code is written in C# using CF3.5. Here is a video of the demo,   You probably noticed that the motion of the marble towards the click point (destination) is not linear. The marble starts off with a high velocity and slows down as it reaches its destination. This is achieved by making the speed of the marble a function of the distance between marble's current position and the destination, so as the marble approaches the destination point, the distance between them reduces and so does the speed, until it becomes zero. More on the code and the logic behind it in the next post. What I'd like to do next is, instead of making the marble stop at the click point, it should continue to move beyond it, bounce around the screen a few times and eventually come to a stop after a while. Let's see how that goes.

  Read the article

• SEO - different data with same title and keywords

  - by Junaid Saeed

  here is my scenario i have a website where i redirect my users basing upon the device they were using, lets say a user is visiting from an iPad, i take him directly to the page of iPad wallpapers, the user selects iPad version & i take the user to the gallery of wallpapers where the user can select & download any wallpaper. Every wallpaper is the required resolution, i have my reasons for doing this, now the thing is there are diff. resolution. versions of an image appearing one 5 diff. sections of my website, each having their own view page Now there is only one record in db.table for the image, and basing on the my consistent naming convention of the images, i pick the required image. this means when 5 different pages are generated in 5 categorized sections of the website, due to a shared DB record, the keywords, the titles and every single detail of the 5 pages is same besides the resolution of the image, and the section specific details that the page has and yeah the pages also have different paths like wallpapers.com\ipad-1\cars\Ferrari-dino.html wallpapers.com\ipad-2\cars\Ferrari-dino.html wallpapers.com\ipad-3\cars\Ferrari-dino.html wallpapers.com\ipad-4\cars\Ferrari-dino.html wallpapers.com\ipad-5\cars\Ferrari-dino.html now this is my scenario, How do Search Engines see it and how do they rank it? Is it a Good or Normal or Bad SEO practice? If bad how dangerous it is for my sites SEO? i need your comments on my scenario.

  Read the article

• Windows 8 Store App Crash Logs

  - by David Paquette

  I was recently working on a Windows 8 app, and the application was crashing occasionally.  When resuming the application, the app would crash and close immediately without providing any feedback or information on what went wrong.  The crash was very difficult to reproduce, and I could never get the crash to occur when I was debugging through Visual Studio.  My app was crashing, and I had no idea what was going wrong!  HELP!!! After doing some digging, I found that when a Windows 8 Store App crashes, an error is logged in Windows Administrative Events.  You can view the details of any app crash by launching the Event Viewer and selecting Administrative Events under Custom Views.  The Source of the error will be listed as AppHost.  AppHost is the process that runs your Windows 8 Store App.  The error details contain all the information you would expect to find, including a stack trace and line numbers.   Windows 8 Tip:  A shortcut for launching the Event Viewer in Windows 8.  Right click on the bottom left corner of your desktop (where you normally click to go to the Start Screen).  A menu will appear with shortcuts to a number of common system tasks such as Event Viewer, Task Manager, Command Prompt, and Device Manager.

  Read the article

• Windows Embedded Compact 7

  - by Valter Minute

  This will be the official name of the new release of Windows CE. Windows Embedded Compact 7 is available as a public CTP and it already supports a wide range of CPUs and both the device emulator and VirtualPC emulated environments. So I’ll have to learn a new (and longer) name for my favorite OS… but I (and all my two readers!) will be able to test it as soon as the download from connect web site completes (I'm sorry for my readers, but you'll have to download it by yourselves). Here’s a link for the download (it's free but you’ll have to register on connect with a valid LiveId): https://connect.microsoft.com/windowsembeddedce Remember that this is still a beta (or “Community Technology Preview” if you speak marketing language) and so it’s better to not install it on your main development PC (or, at least, backup everything before installation) and that the features and performances you’ll get from this beta may not be the same ones of the final release of the OS. You can discover the new features of Windows Embedded Compact on the new “official” webpage on microsoft website: http://www.microsoft.com/windowsembedded/en-us/products/windowsce/compact7.mspx or on Olivier’s blog: http://blogs.msdn.com/b/obloch/archive/2010/06/01/windows-embedded-compact-7-announced-and-public-ctp-available.aspx I hope to be able to post some interesting content about Windows Embedded Compact 7 soon (and maybe be able to shorten it’s name in CE7 in my blog posts, when I'll ensure that both my readers are not worketing for Microsoft's marketing department …). Technorati Tags: "Windows Embedded Compact 7"

  Read the article

• Java SE 8 (with JavaFX) Developer Preview Release for ARM

  - by Roger Brinkley

  In an effort to get ARM developers testing Java SE 8 before the scheduled release later this year a Java SE 8 Developer Preview Release for ARM has been made available. This release has been tested on the Raspberry PI but should work on other ARM platforms. In addition to the new Java SE features, this release provides specific support of hard float GPU on the Raspberry PI. The support for hard float GPU has been anticipated by a number of developers. Additionally, this release includes support of an optimized JavaFX. Specific configurations of JDK 8 on ARM are defined below: Java FX is supported on ARM architecture v6/7 (hard float) Supported platforms without Java FX: ARM architecture v6/7 (hard float) ARM architecture v7 (VFP, little endian) ARM architecture v5 (soft float, little endian) Linux x86 The download page includes setup instructions for a Raspberry PI device as well as demos and samples. Developers are also encouraged to try their own applications as well and to share their stories via the JavaFX or Project Feedback Forums.  If you've got a Raspberry PI or other ARM devices it's time to get started with Java SE 8 Developer Preview release.

  Read the article

• OPN Solutions Catalog Goes Mobile

  - by Meghan Fritz-Oracle

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Good news for our partners on this sunny Tuesday! Oracle PartnerNetwork is pleased to announce the launch of a mobile-ready OPN Solutions Catalog. Features include: A fluid search and browse experience regardless of device (phone, tablet, or desktop) Streamlined design and reorganized search facets, making it easier for customers to search and browse for partner profiles and their solutions The OPN Solutions Catalog is a free marketing tool for all active Oracle PartnerNetwork members. If you are an OPN partner… take advantage of it! To learn more about the new catalog, watch the Solutions Catalog Training which includes best practices and a demo on how to update your profile. Spend a few minutes with our experts to learn how you can expand your market reach and showcase your offerings to our customers, partners, and Oracle employees worldwide.Questions? Visit the Solutions Catalog Resource page or contact the Partner Business Center.

  Read the article

• Antenna Aligner Part 6: Little Robots

  - by Chris George

  A week ago I took temporary ownership of a HTC Desire S so that I could start testing my app under Android. Support for Android was not in my original plan, but when Nomad added support for it recently, I starting thinking why not! So with some trepidation, I clicked the Build for Android button on the Nomad toolbar... nothing. Hmm... that's not right, I was expecting something to build. After a bit of faffing around I finally realised that I hadn't read the text on the Android setup page properly (yes that's right, RTFM!), and I needed a two-part application identifier, separated by a dot. I did this (not sure what the two part thing is all about, that one my list to investigate!) After making the change, the Android build worked and created the apk file. I uploaded this to the device and nervously ran it... it worked!!!  Well, more or less! So, there was not splash screen, but this was no surprise because I only have the iOS icons and splash screen in my project at the moment. What was more concerning was the compass update didn't seem to be working. I suspect this is a result of using an iOS specific option in the Phonegap compass watcher. Another thing to investigate. I've also just noticed that the css gradient background hasn't worked either... These issues aside, it was actually more successful than I was expecting, so happy days! Right, lets get Googling...   Next time: Preparing for submission to the App Store! :-)

  Read the article

• Cryptswap boot error - can't mount?

  - by woody

  I believe i have my swap set up but am not sure because on start up it says that it is something along the lines of "could not mount /dev/mapper/cryptswap1 M for manual S for skip". But it appears to be mounted? I have already tried this solution with no success. When i run free -m the output is: total used free shared buffers cached Mem: 3887 769 3117 0 54 348 -/+ buffers/cache: 366 3520 Swap: 4026 0 4026 and sudo bklid is: /dev/sda1: UUID="9fb3ccd6-3732-4989-bfa4-e943a09f1153" TYPE="ext4" /dev/mapper/cryptswap1: UUID="bd9fe154-8621-48b3-95d2-ae5c91f373fd" TYPE="swap" and cat /etc/crypttab is: cryptswap1 /dev/sda5 /dev/urandom swap,cipher=aes-cbc-essiv:sha256 my /etc/fstab is: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=9fb3ccd6-3732-4989-bfa4-e943a09f1153 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation #UUID=bb0e378e-8742-435a-beda-ae7788a7c1b0 none swap sw 0 0 /dev/mapper/cryptswap1 none swap sw 0 0 cat /proc/swaps output is: Filename Type Size Used Priority /dev/dm-0 partition 4123644 0 -1 Is my swap not setup correctly or how can i fix my boot message?

  Read the article

• How can I triple boot Xubuntu, Ubuntu and Windows?

  - by ag.restringere

  Triple Booting Xubuntu, Ubuntu and Windows I'm an avid Xubuntu (Ubuntu + XFCE) user but I also dual boot with Windows XP. I originally created 3 partitions and wanted to use the empty one as a storage volume but now I want to install Ubuntu 12.04 LTS (the one with Unity) to do advanced testing and packaging. Ideally I would love to keep these two totally separate as I had problems in the past with conflicts between Unity and XFCE. This way I could wipe the Ubuntu w/ Unity installation if there are problems and really mess around with it. My disk looks like this: /dev/sda1 -- Windows XP /dev/sda2 -- Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Device Boot Start End Blocks Id System /dev/sda1 * 63 78139454 39069696 7 HPFS/NTFS/exFAT /dev/sda2 78141440 156280831 39069696 83 Linux /dev/sda3 156282878 386533375 115125249 5 Extended /dev/sda4 386533376 390721535 2094080 82 Linux swap / Solaris /dev/sda5 156282880 386533375 115125248 83 Linux Keep each in it's own partition and totally separate and be able to select from each of the three systems from the GRUB boot menu... sda1 --- [Windows XP] sda2 --- [Ubuntu 12.04] "Unity" sda3(4,5) -- [Xubuntu 12.02] "Primary XFCE" What is the safest and easiest way to do this without messing my system up and requiring invasive activity?

  Read the article

• LIfebook lh531 inbuilt card reader not working

  - by chandrasekar

  Inbuilt card reader (SD/PRO/SDHC) not working. When I insert the memory card the indicator comes for a milli second and nothing happens. When I do lspci it gives the out put which is pasted below: I use Ubuntu 11.10. Pl help pro-hq@prohq-LIFEBOOK-LH531:~$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) pro-hq@prohq-LIFEBOOK-LH531:~$

  Read the article

• Pandaboard crash on startup or freeze after minutes

  - by Meach

  I just received my Pandaboard ES (rev B) and I am having trouble after installing ubuntu-omap4-addons. Once I copied the image ubuntu-12.04-preinstalled-desktop-armhf+omap4.img on my sd card and boot the pandaboard with it, I run the following commands: sudo add-apt-repository ppa:tiomap-dev/release sudo apt-get update sudo apt-get dist-upgrade sudo apt-get install ubuntu-omap4-extras At the end of the installation of ubuntu-omap4-extras, Ubuntu tells me that a problem occurs when the console displays: ldconfig deferred processing now taking place Clicking on "report the problem" tell me that the problem concerns pvr-omap4-dkms. I read somewhere that this can happen and it is better to reinstall pvr-omap4-dkms. Which I am doing by running: sudo apt-get install --reinstall pvr-omap4-dkms I reboot. Then the board has sometimes difficulties to start Ubuntu: it freezes during the loading page, only action I can do is unplugging the board to start it again. Some other times, Ubuntu load successfully but then freeze at another random time, in the range 20 - 40 minutes. I searched on internet for similar bug and found this: https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/971091 So I typed this in: update-rc.d ondemand disable apt-get -y install cpufrequtils echo 'ENABLE="true" GOVERNOR="performance" MAX_SPEED="0" MIN_SPEED="0"' > /etc/default/cpufrequtils cpufreq-set -r -g performance reboot But it doesn't seems to fix the bug. Another detail: on startup, before the loading screen of Ubuntu (when there is the two penguins displayed :)), it shows this: [0.297271] CPU1: Unknown IPI message 0x1 [0.308990] omap_hwmod: mcpdm: _wait_target_ready error: -16 [0.354705] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts [0.354766] omap_hwmod_mux_init: Could not allocate device mux entry [2.107086] thermal_get_slope:Getting slope is not supported for domain gpu [2.107116] thermal_get_offset:Getting offset is not supported for domain gpu [2.107299] stm_fw: vendor driver stm_ti1.0 registered [8.725555] OMAPRPC: Registration of OMAPRPC rpmsg service returned 0! debug=0 Any idea what can be wrong? I am not that good with Ubuntu so any help will be appreciated. Cheers! Meach

  Read the article

• Authenticate native mobile app using a REST API

  - by Supercell

  I'm starting a new project soon, which is targeting mobile application for all major mobile platforms (iOS, Android, Windows). It will be a client-server architecture. The app is both informational and transactional. For the transactional part, they're required to have an account and log in before a transaction can be made. I'm new to mobile development, so I don't know how the authentication part is done on these platforms. The clients will communicate with the server through a REST API. Will be using HTTPS ofcourse. I haven't yet decided if I want the user to log in when they open the app, or only when they perform a transaction. I got the following questions: 1) Like the Facebook application, you only enter your credentials when you open the application for the first time. After that, you're automatically signed in every time you open the app. How does one accomplish this? Just simply by encrypting and storing the credentials on the device and sending them every time the app starts? 2) Do I need to authenticate the user for each (transactional) request made to the REST API or use a token based approach? Please feel free to suggest other ways for authentication. Thanks!

  Read the article

• Algorithm to match timestamped events from two sources

  - by urza.cc

  I have two different physical devices (one is camera, one is other device) that observe the same scene and mark when a specified event occures. (record timestamp) So they each produce a serie of timestamps "when the event was observed". Theoretically the recorded timestamps should be very well aligned: Visualized ideal situation on two time lines "s" and "r" as recorded from the two devices: but more likely they will not be so nicely aligned and there might be missing events from timeline s or r: I am looking for algorithm to match events from "s" and "r" like this: So that the result will be something like: (s1,null); (s2,r1); (s3,null); (s4,r2); (s5,r3); (null,r4); (s6,r5); Or something similar. Maybe with some "confidence" rating. I have some ideas, but I feel that this might be probably a well known problem, that has some good known solutions, but I don't know the right terminology. I am a little bit out of my element here, this is not my primary area of programming.. Any helps, suggestions etc will be appreciated.

  Read the article

< Previous Page | 692 693 694 695 696 697 698 699 700 701 702 703  | Next Page >