Search Results

Search found 22167 results on 887 pages for 'message listener'.

Page 696/887 | < Previous Page | 692 693 694 695 696 697 698 699 700 701 702 703  | Next Page >

  • How to set up GRUB2 chainloader to other Grub (Fedora, Debian) on GPT

    - by basic6
    I'm trying to set up a dedicated GRUB2 which (chain-)loads another GRUB on a disk with GPT partition table. Relevant partitions: /dev/sda1 BIOS_BOOT /dev/sda2 BOOT (ext2) /dev/sda3 FEDORA (ext4) /dev/sda6 DEBIAN (ext4) I installed Fedora first, using /dev/sda2 as boot partition. Then I installed Debian. The Debian installer recognized the Fedora installation and added it as boot entry, then installed its GRUB into the MBR. While this works for the moment, it's pretty messy, because every Debian update may change the boot config, removing the Fedora entry (tried it) and the other way around. That's why I want both systems to have their own boot loader and one main boot loader (that could reside on /dev/sda2), which loads one of them. This is what I've tried: Moved everything from /dev/sda2 to /dev/sda3/boot Removed /boot mount point in Fedora (so /dev/sda2 isn't used anymore) From a live Linux, installed GRUB2 to the MBR (grub-install --boot-directory=sda2 /dev/sda) Wrote a menu.lst: title Fedora root (hd0,2) chainloader +1 (Again, for Debian) Converted that to a grub.cfg script (grub-menu2cfg or something like that) When booting, actually got a GRUB2 menu with "Fedora" (and "Debian") When selecting any one of those: error: invalid signature Issued "grub-install /dev/sda6" (and ...sda3) from all kinds of live Linux systems, all of which failed with another error message (in the case of the Debian installer, without explanation at all) Added --force to the chainloader line, now it says "loading", then reboots Found douzens of howtos, none of which seem to work for me Since I get the self-made GRUB2 menu on bootup, I've at least successfully installed the first stage of GRUB, right? When trying to chainload, some signature is checked and seems to be wrong - how do I fix it? The boot menus (Fedora with its different Kernel versions and Debian with Debian and Fedora as well) are now on the system partitions (/dev/sda3, /dev/sda6), is there anything else to do on these partitions, so they can be chainloaded? Any help is greatly appreciated.

    Read the article

  • "Delivered-To" Header in Exchange

    - by Kaii
    In some SMTP server implementations (i.e. Postfix) you can enable Delivered-To and X-Original-To headers that will be added to your email. (or [X-]Envelope-To) This is very helpful with distribution lists to determine which e-mail address the mail has been redirected to. So, when the mail has been sent to [email protected], you can see in the Delivered-To or Envelope-To header that it has been redirected (distributed) to [email protected], which is one of many other e-mail addresses that are linked to a single mailbox. How do I find which address was used to deliver this mail to a specific mailbox on Microsoft Exchange 2010? Looking at the plain message (with all headers) i can not find any information that the mail arrived via address [email protected] I think I need the Delivered-To header (or a similar one) to be set on Microsoft Exchange when a mail is delivered via distribution lists. Is there any way to enable such header in Exchange 2010? I need it so that our Ticket system (OTRS) correctly recognizes where the ticket belongs to. Adding all the e-mail addresses of all distribution lists to the system configuration is not the right solution. And if there is a solution for Exchange 2010, is this possibly also applicable to Exchange 2007?

    Read the article

  • Hotmail marking messages as junk

    - by Canadaka
    I was having problems with emails sent from my server being blocked completely by Hotmail, but I found out Hotmail had blocked my IP and by contacting Hotmail I had the block removed. See this question for more info: Email sent from server with rDNS & SPF being blocked by Hotmail But now all emails from my server are going directly to recipients "Junk" folder on hotmail and I can't figure out why. Hotmail says "Microsoft SmartScreen marked this message as junk and we'll delete it after ten days." I tried contacting the same people at Hotmail who had my IP block removed, but I haven't received any reply and its been almost a week. Here are some details: I have a valid SPF record for my domain "v=spf1 a include:_spf.google.com ~all" I have reverse DNS setup I have a Sender Score of 100 https://www.senderscore.org/lookup.php?lookup=66.199.162.177&ipLookup.x=55&ipLookup.y=14 I have signed up for Microsoft's SNDS and was approved. My ip says "All of the specified IPs have normal status." Microsoft added my IP to the JMRP Database My IP is not on any credible spam lists http://www.anti-abuse.org/multi-rbl-check-results/?host=66.199.162.177 my FROM header is being sent in proper format "From: CKA <[email protected]>" Here is a test email source:

    Read the article

  • Windows 8 Doesn't Shutdown Properly With Fast Start-Up Enabled

    - by Patrick
    While Fast start-up is enabled, on turning the computer off (shutdown) the computer idles for about 5min after logging out/screen turning off. It then turns off. On returning into Windows I receive the error message saying Windows didn't shut down properly. Hibernate works fine, and I am told this shouldn't be the case - If one doesn't work, neither should. It works when both Fast start-up is enabled and disabled, as does restart and sleep. Windows is installed under UEFI. The UEFI ultra fast boot option for my motherboard cannot be enabled as my GPU doesn't support some UEFI GOP tech. As far as I know, not related to windows fast start-up, but thought it was worth mentioning. To clarify, if this: http://www.eightforums.com/tutorials/6320-fast-startup-turn-off-windows-8-a.html is enabled, the computer does not shut down properly. EDIT: Some more information on the matter: Formatting didn't fix the issue. Still fails regardless of drivers installed. Hardware was purchased ~6months ago. Running a good SSD. Event viewer Always these two messages in close succession: Error (event ID 6008): The previous system shutdown at 7:45:21 PM on ?27/?10/?2012 was unexpected. Critical (kernel power, event ID 41): The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. Upon installing WPT as suggested below to figure out what was happening during shutdown, and running the cmd xbootmgr -trace shutdown -noPrepReboot -traceFlags BASE+CSWITCH+DRIVERS+POWER -resultPath C:\TEMP Windows fast start-up is now working consistently. Still works upon uninstalling WPT. This is the only change to occur on the computer. Nothing else has bee installed/uninstalled, no Windows Updates, nothing. Windows fast start-up did not work prior to installing WPT and running the cmd (made sure I tested).

    Read the article

  • Thundrbird 3: can't change column width?

    - by rumtscho
    I recently installed Thunderbird 3.0.3. Just noticed a suboptimal UI setting: in the upper pane, which lists the e-mails in the current folder, the Date column is about 200px wide. So when I keep the window at 480x600, all I see in a row is: | tree icon | favourites icon | attachment icon | read icon | junk icon | Date and time, followed by 5cm whitespace | ... | P Where "P" is the first letter of the name of the sender. And the "..." is actually shown this way, I have no idea which column it is meant to be. But I don't see neither the sender, nor the message subject, which makes scrolling a folder for a certain mail rather pointless. I see these when I maximize the window, actually the columns are then not only bigger, they are arranged in another sequence. But I feel that holding a mail client permanently maximised at 1600x1200 is a waste of screen real estate. My naive solution attempt was to try to go with the mouse cursor to the right edge of the date column and try to shrink it by moving the cursor left while holding down the left mouse button. Not only is this default behaviour for all resizable columns I've ever encountered in GUIs, the cursor actually turns into a horizontal double-headed arrow. But pulling has no effect at all. I cannot make a wide column narrow, and I cannot make the narrow columns wide. I didn't find anything in the preferences either. So can please somebody explain how to get the columns arranged sensibly?

    Read the article

  • Google Chrome warning that Javascript is disabled

    - by kirchoffs415
    I hope somebody can help. I keep getting the following message when I log on: Your Javascript is disabled. Limited functionality is available. It will stay for maybe a day sometimes two. I have uninstalled javascript and reinstalled but still the same. I am using chrome. Any help would be grateful many thanks Dominic My system spec is as follows System InformationOS Name Microsoft® Windows Vista™ Home Premium Version 6.0.6002 Service Pack 2 Build 6002 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name DOM-PC System Manufacturer Dell Inc. System Model Inspiron 1545 System Type X86-based PC Processor Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, 2000 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Dell Inc. A05, 25/02/2009 SMBIOS Version 2.4 Windows Directory C:\Windows System Directory C:\Windows\system32 Boot Device \Device\HarddiskVolume3 Locale United Kingdom Hardware Abstraction Layer Version = "6.0.6002.18005" User Name DOM-PC\DOM Time Zone GMT Standard Time Installed Physical Memory (RAM) 3.00 GB Total Physical Memory 2.96 GB Available Physical Memory 1.38 GB Total Virtual Memory 5.89 GB Available Virtual Memory 4.25 GB Page File Space 3.00 GB Page File C:\pagefile.sys My System Specs

    Read the article

  • Google Chrome doesn't want to access Facebook

    - by Pieter van Niekerk
    I have been experiencing a bit of a problem with Chrome over the last couple of days where it doesn't want to access Facebook. When I open Chrome it works fine for a while and then if I were to refresh the page it would give me the Chrome 'This webpage is not available' message. This webpage is not available Google Chrome could not load the webpage because www.facebook.com took too long to respond. The website may be down, or you may be experiencing issues with your Internet connection. Here are some suggestions: Reload this webpage later. Check your Internet connection. Restart any router, modem, or other network devices you may be using. Add Google Chrome as a permitted program in your firewall's or antivirus software's settings. If it is already a permitted program, try deleting it from the list of permitted programs and adding it again. If you use a proxy server, check your proxy settings or contact your network administrator to make sure the proxy server is working. If you don't believe you should be using a proxy server, adjust your proxy settings: Go to the wrench menu Options Under the Hood Change proxy settings... LAN Settings and deselect the "Use a proxy server for your LAN" checkbox. This problem only persists when using the proxy and doesn't occur at all when not on the proxy. I have also tried different browsers (IE9 and Firefox 9.01) but it doesn't occur in any of them. This problem goes away for a while when I restart Chrome, only to happen again a couple of minutes later. I have tried deleting the cookies for Facebook without restarting Chrome, but to no avail. I am using Windows7 with Chrome 17

    Read the article

  • Vista - Profile not Loaded Correctly (Cannot Access Registry)

    - by Geoff
    Every so often, I log on and get the Following Message: User profile was not loaded correctly. You have been logged on with a temporary profile. Changes you make to this profile will be lost when you log off. Please see the event log for details or contact your administrator This almost always happens when somebody else has been on the computer for a while, and then I log on. This never used to happen, but now it happens pretty often. My profile is not permanently corrupted, all I have to do is restart my computer, but this annoys me, and I would like to fix it. I was curios about the reason of this cause, so I looked into the Event Log, and found the root of the problem was the ntuser.dat file in the profile that I was logging on to was locked at logon time. This resulted in the current users registry not being loaded, resulting in failure to load the profile. What could be locking this file? is there any way to get a process list without logging on so that I can identify which process has the file locked? Any other suggestions. Hopefully I can find a solution.

    Read the article

  • Remote SQL server connection failure

    - by Sevki
    I am trying to connect to my MSSQL server 2008 web instance and im failing horribly... i get the error 26 and before you jump on me i have done these Check the spelling of the SQL Server instance name that is specified in the connection string. Use the SQL Server Surface Area Configuration tool to enable SQL Server to accept remote connections over the TCP or named pipes protocols. For more information about the SQL Server Surface Area Configuration Tool, see Surface Area Configuration for Services and Connections. Make sure that you have configured the firewall on the server instance of SQL Server to open ports for SQL Server and the SQL Server Browser port (UDP 1434). Make sure that the SQL Server Browser service is started on the server. in addition to theese i have disabled the firewall completely and tried other ports nothing works the same credentials work on the server but not on the client. this is the exact error message A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (.Net SqlClient Data Provider) Can anybody help?

    Read the article

  • Problems with Windows 7 restore

    - by Chris Lively
    My WD raptor 150 failed with a nice clicking noise. So, I picked up a velociraptor 300 and popped it in. I had windows set to do a full system backup nightly, so I figured the recovery ought to go easily. Well, it isn't. It is currently stuck on a screen that says: "Windows is restoring your computer from the system image. This might take from a few minutes to a few hours" Below that is a rather large progress meter with maybe the first block filled in. Below that is a message that says "Restoring disk (C:)..." It's been that way for over an hour. The first time around, I gave up after 2 hours. I then booted into the system recovery options and went to a command prompt and ran a chkdsk on the new drive. It showed several file inconsistencies and not much else. I ran a chkdsk /f on it and tried again... Which is where I'm at now. I can't see that the restore process should take this long before. Any ideas? UPDATE After 10 hours, it's still on "Restoring disk (C:)" and the progress meter is at roughly 5%. I'm guessing at the 5% as there isn't an actual number or anything else that I can look at showing what it's actually doing. The backup contains roughly 120GB of data. How slow is windows restore?

    Read the article

  • Not able to run firefox in a head-less Ubuntu server 9.10

    - by Julio J.
    I need to run Firefox in my server in order to execute some Selenium tests from Hudson. I would love no to have to install a complete gui. So I installed Xvfb in order to fake the Gui (I understand it this way correct me if my assumptions are wrong). After some time trying to make it work, I'm stuck with the next situation: $ sudo Xvfb -ac :99 & [dix] Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) $ firefox [dix] Could not init font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, removing from list! [config/dbus] couldn't register object path (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) (EE) config/hal: NewInputDeviceRequest failed (2) Xlib: extension "RANDR" missing on display ":99.0". GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Failed to get connection to session: /bin/dbus-launch terminated abnormally without any error message) I'm runnig firefox without installing it from the repositories. And I'm getting a socket timeout when I try to run the selenium tests, so I guess the problem is in Firefox and Xvfb. I have installed already the nex package: i gconf-defaults-service - GNOME configuration database system (system defaults service) That in some forums suggest to be a fix, that in my case doesn't work. Any explanation about the problem and ways of solving it without installing a full gui, will be very helpful.

    Read the article

  • How can I recover my system after running 'mkfs' on the system partition?

    - by Filip Podgórny
    I am not a Linux user, and was doing some homework, I blindly typed sudo mkfs ext3 dev/sda2 (I had Ubuntu as Windows installation). I've done few more things, and turned Ubuntu off to switch on Windows back. No operating system installed - this is the message I'm getting. I plugged my HDD onto another computer and all my files are still there. What should I do to get my windows installation back? df -l (before mkfs) /dev/loop0 29G 2,0G 27G 8% / udev 3,0G 4,0K 3,0G 1% /dev tmpfs 1,2G 900K 1,2G 1% /run none 5,0M 0 5,0M 0% /run/lock none 3,0G 1,3M 3,0G 1% /run/shm /dev/sda3 455G 123G 333G 27% /host /dev/sdb1 1,9G 820M 1,1G 43% /media/PHONE CARD mkfs output (polish, sorry) mke2fs 1.41.14 (22-Dec-2010) Etykieta systemu plików= Typ OS: Linux Rozmiar bloku=1024 (log=0) Rozmiar fragmentu=1024 (log=0) Stride=0 bloków, szerokosc Stripe=0 bloków 25688 i-wezlów, 102400 bloków 5120 bloków (5.00%) zarezerwowanych dla superuzytkownika Pierwszy blok danych=1 Maksymalna liczba bloków systemu plików=67371008 13 grup bloków 8192 bloków w grupie, 8192 fragmentów w grupie 1976 i-wezlów w grupie Kopie zapasowe superbloku zapisane w blokach: 8193, 24577, 40961, 57345, 73729 Zapis tablicy i-wezlów: zakonczono Tworzenie kroniki (4096 bloków): wykonano Zapis superbloków i podsumowania systemu plików: wykonano Ten system plików bedzie automatycznie sprawdzany co kazde 30 montowan lub co 180 dni, zaleznie co nastapi pierwsze. Mozna to zmienic poprzez tune2fs -c lub -i.

    Read the article

  • Setting Outlook Web Access as default mail client in Firefox

    - by Barton Chittenden
    The company that I work for is nice enough to let me use Linux for work, but they use Outlook. I've been using Outlook Web Access (OWA) as my mail client, which is more or less acceptable. The only problem is that whenever I click on a mailto link or use the "Send Link" menu option in firefox, I'm prompted to use evolution. Since connecting to an exchange server through evolution seems to be sketchy at best, I would like to set OWA as my default mail client. I'm using Firefox 3.6.13 Here's what I've found so far: Default mail client can be found at Edit Menu -> Preferences -> Applications Tab -> mailto When I click on the drop down menu, one of the options is "Application Details" This shows two options by default: Google Yahoo! Mail Each of these shows how to launch that service. For Gmail: https://mail.google.com/mail/?extsrc=mailto&url=%s For Yahoo!: http://compose.mail.yahoo.com/?To=%s I presume that Outlook Web Access has something similar. Based on the googling that I've done so far, I think that this should look something like this: https://<server name>/owa/?cmd=compose... A little experimentation on my part shows that the following will compose a message: https://<email server>/owa/?ae=Item&a=New&t=IPM.Note but I still don't know how to specify recipient, subject or body of the email to be composed... What I want to know is a) does anyone know the URL parameters to compose a mailto in Outlook Web Access, including subject, recipient and body? else b) can someone give me a decent pointer for where to get this information?

    Read the article

  • What could cause TFTP reloaded Cisco `running-config` on 871 to fail?

    - by xtian
    Cisco CCP Write Configuration borked my 871w config while I was trying to setup port forwarding. I went through the basic steps to reconfig the router. I looked to see if I could just reset the router. Nope. I tested the 871's flash memory with fsck to see if there was hardware failure. Nope. Then I rewrote the minimal config for TFTP (which is the same for Cisco's CCP app.). Thne, I successfully uploaded a previously working running-config from Win Vista using SolarWinds TFTP Server, unfortunately the restore was not entirely successful. The old running config was saved to the 871's startup-config and I can login using console port. Some other things that are working are the hostname and welcome message but that's about it. Startup shows an error SETUP: new interface NVI0 placed in "shutdown" state after tftp. The missing light on the access point modem for ethernet link show the 871'a outside FE4 is not working. SO...what's the possible problem with reloading a previously working config (approximately 4 months with the same config) via TFTP? Is there something I can look for on the 871 to verify the config? Or on Vista to validate the config file itself before I transfer it? Or, is this there a common TFTP issue? UPDATE. I missed the instruction from Cisco's TFTP page to delete aaa lines from the config (although a video from a SuperUser user didn't make this point in his most excellent demo). There were several lines of this sort, I deleted them and uploaded again. However, they're back. I assume they're added automatically? [nope, see answer] UPDATE 2. The reload of previous settings was successful, but this error remains. I don't even know now if it was there before or not. It seems irrelevant to the question.

    Read the article

  • HTTP Error: 413 Request Entity Too Large

    - by Torben Gundtofte-Bruun
    What I have: I have an iPhone app that sends HTTP POST requests (XML format) to a web service written in PHP. This is on a hosted virtual private server so I can edit httpd.conf and other files on the server, and restart Apache. The problem: The web service works perfectly as long as the request is not too large, but around 1MB is the limit. After that, the server responds with: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>413 Request Entity Too Large</title> </head><body> <h1>Request Entity Too Large</h1> The requested resource<br />/<br /> does not allow request data with POST requests, or the amount of data provided in the request exceeds the capacity limit. </body></html> The web service writes its own log file, and I can see that small messages are processed fine. Larger messages are not logged at all so I guess that something in Apache rejects them before they even reach the web service? Things I've tried without success: (I've restarted Apache after every change. These steps are incremental.) hosting provider's web-based configuration panel: disable mod_security httpd.conf: LimitXMLRequestBody 0 and LimitRequestBody 0 httpd.conf: LimitXMLRequestBody 100000000 and LimitRequestBody 100000000 httpd.conf: SecRequestBodyLimit 100000000 At this stage, Apache's error.log contains a message: ModSecurity: Request body no files data length is larger than the configured limit (1048576) It looks like my step #4 didn't really take, which is consistent with step #1 but does not explain why mod_security appears to be active after all. What more can I try, to get the web service to receive large messages?

    Read the article

  • Ubuntu upgrade process failed

    - by Spin0us
    I tried to dist-upgrade my ubuntu server on my percona cluster but it failed with this message The following packages have unmet dependencies: libmysqlclient18 : Depends: libmariadbclient18 (= 5.5.33a+maria-1~precise) but it is not installable And here is the package listing # dpkg --list | grep -E 'percona|mysql' ii libdbd-mysql-perl 4.020-1build2 Perl5 database interface to the MySQL database iU libmysqlclient18 5.5.33a+maria-1~precise Virtual package to satisfy external depends ii mariadb-common 5.5.33a+maria-1~precise MariaDB database common files (e.g. /etc/mysql/conf.d/mariadb.cnf) ii percona-xtrabackup 2.1.5-680-1.precise Open source backup tool for InnoDB and XtraDB ii percona-xtradb-cluster-client-5.5 5.5.31-23.7.5-438.precise Percona Server database client binaries ii percona-xtradb-cluster-common-5.5 5.5.33-23.7.6-496.precise Percona Server database common files (e.g. /etc/mysql/my.cnf) ii percona-xtradb-cluster-galera-2.x 157.precise Galera components of Percona XtraDB Cluster ii percona-xtradb-cluster-server-5.5 5.5.31-23.7.5-438.precise Percona Server database server binaries ii php5-mysql 5.3.10-1ubuntu3.8 MySQL module for php5 During the install of the server, mariadb and galera cluster have first been installed. Then removed to be replaced by percona XtraDBCluster. So i think this is the source of the problem. But how can i resolve this without reinstalling all ? UPDATE 1 # apt-cache policy libmariadbclient18 libmariadbclient18: Installed: (none) Candidate: (none) Version table: 5.5.32+maria-1~precise 0 100 /var/lib/dpkg/status

    Read the article

  • slicehost google apps mx settings

    - by Bob
    Hello All, I am banging my head against the wall on this one. I followed the MX setup tutorials for Google Mail and it didn't work. Currently, after deleting those records and adding the ones google suggested I have domain.com. 86400 IN MX 10 ASPMX.L.GOOGLE.com. domain.com. 86400 IN MX 20 ALT2.ASPMX.L.GOOGLE.com. domain.com. 86400 IN MX 20 ALT1.ASPMX.L.GOOGLE.com. domain.com. 86400 IN MX 30 ASPMX2.GOOGLEMAIL.com. domain.com. 86400 IN MX 30 ASPMX5.GOOGLEMAIL.com. domain.com. 86400 IN MX 30 ASPMX3.GOOGLEMAIL.com. domain.com. 86400 IN MX 30 ASPMX4.GOOGLEMAIL.com. according to the output of my dig command for my particular "domain". I can send email from google apps mail but I can not recieve any email. It gives me the following error: Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 550 550 #5.1.0 Address rejected [email protected] Now I already tried following the slicehost MX article instructions straight as well and they did not work out for me. The domain has already been verified by google and it says the email is activated from their end. Any help would be appreciated : )

    Read the article

  • Postfix: How do I Make Email Aliases Work?

    - by Nick
    The documentation claims that I can add aliases in a file (like /etc/postfix/virtusertable) and then use the "virtual_maps" directive to point to it. This does not appear to be working, however. My mail is bouncing with: Recipient address rejected: User unknown in local recipient table; If I mail the user from the server using the mail command, it works. mail myuser The message goes through postfix and inserts itself in the Cyrus inbox correctly. When I use fetchmail to get the user's messages off a pop3 server, postfix fails. The user's email is "[email protected]", but it doesn't seem to be mapping correctly to "myuser", the cyrus mailbox name. /etc/postfix/main.cf myhostname = localhost alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all mailbox_transport = lmtp:unix:/var/run/cyrus/socket/lmtp #lmtp:unix:/var/run/lmtp virtual_alias_domains = mydomain.com virtual_maps = hash:/etc/postfix/virtusertable /etc/fetchmailrc et syslog; set daemon 20; poll "mail.pop3server.com" with protocol pop3 user "[email protected]" password "12345" is "myuser" fetchall keep /etc/postfix/virtusertable [email protected] myuser postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all mailbox_size_limit = 0 mailbox_transport = lmtp:unix:/var/run/cyrus/socket/lmtp mydestination = localhost myhostname = localhost mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes virtual_alias_domains = mydomain.com Why is it ignoring my alias?

    Read the article

  • Mac updated just now, postgres now broken

    - by Dave
    I run postgres 9.1 / ruby 1.9.2 / rails 3.1.0 on a maxbook air for local dev. It's all been running smoothly for months, (though this is the first time I've done development on a mac.) It's a macbook air from last year, and today I got the mac osx software update message as I have a few times before, and my system downloaded approx 450mb of updates and restarted. It now says it's on OSX 10.7.3. Point is, postgres has stopped working, when I start my thin server (mirror heroku cedar) as normal, and then browse to my rails app I get: PG::Error could not connect to server: Permission denied Is the server running locally and accepting connections on Unix domain socket "/var/pgsql_socket/.s.PGSQL.5432"? What happened? After browsing around a few questions I'm still confused, but here's some extra info: Running psql from command line gives same error I can run pgadmin 3 and connect via it and run SQL no problems Running which psql shows the version as /usr/bin/psql I created a PostgreSQL user back when I got the mac (it's always been on lion) I've no idea why, almost certainly I was following a tutorial which I neglected to store in my notes. Point is I am aware there is a _postgres user as well. I know it's rubbish, but apart from a note on passwords, I don't have any extra info on how I configured postgres - though the obvious implication is that I did not use the _postgres user. Anyone have suggestions or information on what might have changed / what I can try to debug and fix? Thanks. Edit: Playing around based on this question and answer: http://stackoverflow.com/questions/7975414/check-status-of-postgresql-server-mac-os-x, see this string of commands: $ sudo su postgreSQL bash-3.2$ /Library/PostgreSQL/9.1/bin/pg_ctl start -D /Library/PostgreSQL/9.1/data pg_ctl: another server might be running; trying to start server anyway server starting bash-3.2$ 2012-04-08 19:03:39 GMT FATAL: lock file "postmaster.pid" already exists 2012-04-08 19:03:39 GMT HINT: Is another postmaster (PID 68) running in data directory "/Library/PostgreSQL/9.1/data"? bash-3.2$ exit

    Read the article

  • How do I stop postfix from handling my mail?

    - by Tatu Ulmanen
    Here's the situation: I have a domain, let's say domain.com. That domain has Google Apps for Business enabled, so all mail delivered to @domain.com will end up at Google (MX records point to Google). I have a PHP script at domain.com that I use to send mail to myself. But when the PHP script tries to send mail to [email protected], Postfix at that server decides that the recipient is a local user (because the address matches the domain Postfix itself is at), and tries to deliver the mail locally. But inevitably fails as the mailbox cannot be found. How can I instruct Postfix to not try to handle locally any emails to @domain.com and just send them forward so Google can pick them up? I have already removed $myhostname from mydestination field in Postfix's main.cf file, and I have restarted Postfix but Postfix still tries to deliver the mail locally. Here's a snip from mail.log that show the problem (addresses replaced): postfix/pickup[20643]: AF718422E5: uid=33 from=<server> postfix/cleanup[20669]: AF718422E5: message-id=<62e706bcca5a0de0bfec6baa576d88a5@server> postfix/qmgr[20642]: AF718422E5: from=<server>, size=517, nrcpt=1 (queue active) postfix/pipe[20678]: AF718422E5: to=<[email protected]>, relay=dovecot, delay=0.62, delays=0.47/0.03/0/0.13, dsn=5.1.1, status=bounced (user unknown) postfix/bounce[20680]: AF718422E5: sender non-delivery notification: 29598422E7 postfix/qmgr[20642]: AF718422E5: removed

    Read the article

  • with nginx having the base url rewrite to https

    - by jchysk
    I'd like only my base domain www.domain.com to be rewritten to https://www.domain.com By default in my https block I have it reroute to http:// if it's not ~uri = "/" (base domain) or static content. server { listen 443; set $ssltoggle 2; if ($uri ~ ^/(img|js|css|static)/) { set $ssltoggle 1; } if ($uri = '/') { set $ssltoggle 1; } if ($ssltoggle != 1) { rewrite ^(.*)$ http://$server_name$1 permanent; } } So in my http block I need to do the rewrite if it has to https: server { listen 80; if ($uri = '/') { set $ssltoggle 1; } if ($ssltoggle = 1) { rewrite ^(.*)$ https://$server_name$1 permanent; } } If I don't have the $uri = '/' if-statement in the http block, then https works fine if I go directly to it, but I won't get redirected if I go to regular http which is expected. If I do put that in-statement in the http block then everything stops working within minutes. It might work for a few requests, but will always stop within a minute or so. In browsers I just get a blank page for all requests. If I restart nginx it continues to not work until I remove both if-statement blocks in both the https and http blocks and restart nginx. When I look in the error logs I don't see anything logged. When I look in the access log I see this message: "-" 400 0 "-" "-" which I assume means a 400 error. I don't understand why this doesn't work for me. My end goal is to have the base domain be https-only while all other pages default to http. How can I achieve this?

    Read the article

  • How can I change the default location/action of 'Open Outlook Data File' in Outlook 2010?

    - by Chadddada
    I have recently deployed a Remote Desktop Host server that functions as a remote Microsoft Office 2010 work space for users. In part of the locking down of this server I have installed all programs on the D: drive and, through the use of Group Policy, hidden all the drives on the server from standard users. In addition to hiding these drives I am not allowing users to save anything locally (on the server) or open Libraries. However one of the functions of the server is to provide the Outlook client. Often users will have the .PST file stored on a network location and want to open this in Outlook. Can I change the default action or location that File Open Open Outlook Data File looks or tries to pull the file from? The default location seems to be under Users / Libraries. When click 'Open' you get a warning: This operation has been cancelled due to restrictions in effect on this computer. Clicking OK drops the user into a small menu that shows attached network drives under Computer. Can I instead have the 'Open' click drop the users in a defined network drive or just open computer and allow them to select a share? I don't want them to see the error message. A solution that looks to have been used for Office 2000/03 is: Key: HKEY_CURRENT_USER\Software\Microsoft\Office\<version>\Outlook Value name: ForceOSTPath Value type: REG_EXPAND_SZ Value: path to your storage folder I am not sure if there is a better way to do this now OR if this even works with Office 2010.

    Read the article

  • My iPod never finishes syncing and only syncs audio, not pictures or video - any ideas as to how I c

    - by Sam Meldrum
    My iPod classic 160GB worked well for a couple of years. I used to sync a lot of photos at full resolution to it, but this recently stopped working after I moved to Windows 7. iTunes is on latest version - 9.1.1.12 iPod software is up to date - 1.1.2 Windows 7 is fully up to date and patched The symptoms are that the iPod will start to sync, all audio (music and podcasts will sync successfully) but the syncing will then just appear to continue - itunes message: Syncing iPod. Do not Disconnect. This sync never completes - I have left it trying for days. I have tried resetting the iPod using the Restore button, whereupon it restarts sync from default options and again will sync audio, but nothing else. I suspect that something has gone wrong on the hard-drive - either a bad sector or some corrupt data. Is there a process I can go through to fix this? E.g. SpinRite or a format? If so how do I go about formatting an iPod and will it be recognised as an iPod after format and work as normal? Any advice on what to try next much appreciated?

    Read the article

  • Win7 Ultimate 64bit not finding my SSD, any ideas?

    - by Jakub
    So I am trying to install Windows 7 Ultimate 64bit on my new SSD (Kingston SNVP325-S2/64GB) and I have unplugged my other drives (for the install only). The SSD is detected by BIOS, I am running the latest Firmware for my motherboard P5N-E SLI (775 socket). Upon getting the Windows 7 install screen, it gives me a 'no drives detected'. I have tried Load Driver and downloding nForce drivers (latest for Win7 64bit signed WHQL) results in a message of (something like) "To continue please click Load Driver and load 32-bit and signed 64-bit drivers... blah blah" ... basically it does NOT accept my nForce SATA drivers, nor my 2ndary SATA drivers (JMicron? can't recall the exact name now). I have tried F8 at loading to 'disable driver signing' in hopes that it was an unsigned driver, however nothing works. The SSD is not detected by the Windos 7 installer. I wasted 4 hours on this last night, and gave up, and got nowhere. Anyone heard / ran into this issue before? How can I get the drive detected? Some more details: - Kingston SNVP325-S2/64GB V+ SSD - ASUS P5N-E SLI MOBO - 8GB RAM A-DATA (memory is checked out and fine)

    Read the article

  • System recognizes admin password on the Welcome screen but not when elevating

    - by Lee C.
    I set up Windows 7 with a couple of standard accounts, and an administrator account (called Odin). I can log in to Odin just fine from the Welcome screen. While logged into Odin I can do anything that requires administrator privileges without a password: just hit Yes in the User Account Control dialog. If I am logged into one of the other accounts and I do something that requires elevation (e.g. most installers, and some control panel functionality), then Windows presents me with a User Account Control dialog asking "Do you want to allow the following program to make changes to this computer? To continue, type an administrator password, and then click Yes." The account shown in this dialog is Odin, so I enter Odin's password. But Windows redisplays the dialog with the message "Logon failure: unknown user name or bad password." This always happens, and has done so for many months, probably since I first got the computer. Why does Odin's password work from the Welcome screen, but not when elevating? Please note that I am not asking how to recover Odin's password. I remember the password I originally set for Odin, and it works as it should from the Welcome screen, but is not recognized when elevating. The password has no funny characters, just letters and digits. Thanks!

    Read the article

< Previous Page | 692 693 694 695 696 697 698 699 700 701 702 703  | Next Page >