Search Results

Search found 338 results on 14 pages for 'gigabyte'.

Page 7/14 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• System fan connection on Mini-ITX server case and motherboard

  - by Robert

  The case: Newegg listing for Chenbro ES34169-BK-120 The motherboard: GIGABYTE GA-D525TUD (Newegg has it as well but I can't post more than one link due to being a new user) As far as the question, the system fan I have no idea how to get these to connect to the motherboard. There are two connectors which then go to extension fan cables. So when you connect these, it should be good, but the extension cables are two connectors that go to the system fans and a female molex connector (if you click the Chenbro listing, look at the 6th picture and you'll see the two connections being made and the molex connector just kind of hanging out in the case). Is there a piece I'm missing to get it to connect to the 3 pin sys_fan section of the board? Thanks,

  Read the article

• Can't get any SMART or temperature data from HDDs

  - by Regs

  I have a PC with recently installed Gigabyte GA-X79-UD5 MB. I've encountered some weird problem with getting SMART data or temperature for HDDs. Every single tool I've tried in Windows 7 just can't get any data (HDTune, AIDA64...). I was suspecting that SMART feature is disabled in BIOS but it's seems like there is no such option in BIOS settings. I've even tried to update BIOS but still no luck. Same issue with both controllers on that MB (Intel and Marvell). It seems unlikely that both controllers end up with exact same issue. Both controllers are working in AHCI mode. Is there anythig that can interfere with getting SMART ant temp data from HDDs? Or is there any way to check that it's actuall MB issue? Is it even possible that it is hardware issue since all HDDs seems to work normal despite the fact that I can't get any temperature or SMART data from it.

  Read the article

• MySQL: Auto-increment value: 0 is smaller than max used value: xx

  - by Rhodri

  Increasingly I'm getting tables having to be repaired dwith the message returned of: Auto-increment value: 0 is smaller than max used value: xx This has happened on tables with 200 rows and tables with ~3 million rows, but so far the same few tables have had the problem. I'm running MySQL 5.0.22. The repairs are run by a script which checks every minute for the need to repair MySQL tables. I also have an automated backup of the 6 Gigabyte database running very two hours and the repairs always get trigged around the time of the backup. Any ideas?

  Read the article

• Mounting root failed. Dropping into basic maintenance shell

  - by vmsystem

  Hi, I have purchased AMD Phenom X4 955 3.2GHZ processor with supporting gigabyte GA-MA785GM-US2H mother board / 6GB DDR2 RAM / 500GB SATA drive for learning Vmware ESX 3.5 product. In the above configuration, I have installed windows xp 64 bit operating systems and continue to installed vmware workstation 6.5. From the VM workstation, I can able to install ESX3.5 update2, but I unable to start properly, please refer the below mention error. “Mounting root failed. Dropping into basic maintenance shell. To collect logs for VMware, connect a USB storage device and run 'bin/vm-support '. Machine will be rebooted when you exit from this shell.” The same was tested in the windows 2003 Enterprise Edition server / windows 7 32bit / windows 7 64bit also, Please help me to resolve the issue.

  Read the article

• In terms of performance, which processor is more suitable?

  - by Roberts

  My computer specs: Motherboard: Gigabyte GA-945PL-S3 OS: Microsoft Windows 7 Ultimate CPU Socket: LGA775 CPU: Intel® Core™2 Duo Processor E4300 (2M Cache, 1.80 GHz, 800 MHz FSB) After I bought new hard drive (Western Digital 250GB, 7200rpm, 32MB, Sata III, Caviar Blue, WD2500AAKX) I saw that my processor temperature started to raise to higher value then before. Now while surfing internet it goes to 70°C. Cleaned my motherboard - nothing; cleaned fan - nothing; replaced thermal paste - nothing; replaced thermal paste with care - still nothing. So I went to friend just to check if he doesn't have any spear fan, and he did. But with fan he had another processor that he didn't need and he wanted to give it to me, but I told him that I will think about this. So my CPU, he's CPU (Intel® Pentium® D Processor 820 (2M Cache, 2.80 GHz, 800 MHz FSB)). Question: which proccesor is better for gaming and for recording games?

  Read the article

• Chassis fans and power LEDs still work in Hibernate

  - by Jaded

  I have ASRock Z68 Extreme3 Gen3 motherboard recently updated to 2.20 BIOS version. OS is Windows 7 x64. The problem is after that update full hibernation (by that i mean full system power off) stopped working although everything was fine before. Now when I press hibernate, sleep in initiated as usual, monitor goes to sleep, HDD and CPU fan stop spinning, but chassis fans (i have Gigabyte Aurora 3D 570 case with two rear and one front fans) still remain working. Also power leds are lit as if computer is turned on. Tried changing different UEFI settings related to sleep mode, and none of them change above described behaviour. I have "Deep Sleep" (Advanced-South Bridge Configuration) set to "Enabled in S4-S5", "Suspend to RAM" (Advanced-ACPI Configuration) set to "Auto", all fans settings in "H/W Monitor" set to "Auto".

  Read the article

• How to copy only VM changes in VMware to another physical machine

  - by Paul

  How can I use VMware Workstation to copy only changes to a VM to another physical machine, rather than recopying the entire VM every time? Can I just copy the snapshot files, if the second physical machine starts from a pristine copy of the VM? Would it be best to create a linked clone against the original VM, and then copy the linked clone directory each time? Does that even work? (I'm assuming I'll have to change the path in the VM's metadata file, since the paths will be different. I'm assuming I can't clone a linked clone w/o cloning the base.) Background: I and another developer with VMware Workstation are using VM's for systems development. I have to work from a home desktop. Transporting a multi-gigabyte VM either direction takes several hours at best. Downloading it is easiest, but that takes an hour to get it on a DMZ machine for download and then many hours to actually download.

  Read the article

• Z77 Motherboard with i7-2600K cpu, what will not work?

  - by Mxx

  I'm building a new system. So far I think I narrowed it down to Gigabyte GA-Z77X-UD5H (Z77 Ivy Bridge chipset) motherboard. I was planning to get i5-3570K(Ivy Bridge) cpu, but now I can get i7-2600K(Sandy Bridge) cpu for free. It is my understanding that Ivy Bridge platform brings support for PCIe3 and (additional?)USB3 ports. If I were to put SB cpu into IB motherboard, what is going to happen to PCIe3 slot? Will it not work at all or downgrade to PCIe2? Also, what is the situation with USB3 ports?

  Read the article

• For Intel cpu , if chipset and motherboard are also from intel then it will give best performance. I

  - by metal gear solid

  I'm going to purchase Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) and for motherboard my local vendor suggesting me to purchase Intel DG41RQ MB motherboard and he is also saying if i'm purchasing Intel CPU then purchasing Intel's Own motherboard with intel chipset will give best performance. Is it true? To get good inbuilt graphic I'm thinking to purchase nvidia chipset based motherboard of any other company like Asus, Gigabyte, MSi etc. is it ok? Although i never play games on my PC but thinking Inbuilt Nvidia graphics will be better for running Photoshop and watching movies then Intel's inbuilt graphics. or it's ok to purchase Intel DG41RQ MB motherborad as suggested by local vendor. Intel's inbuilt graphics would be enough for Photoshop and Watching movies. If you know any other good motherboard for Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) then tell.

  Read the article

• Power Supply Not Working?

  - by Mr.Glass

  So I recently made some purchases for a new computer including: Motherboard: Gigabyte GA-EP45-UD3R CPU : Intel Core2Quad 2.66Ghz Power Supply: Antec Basiq 500w UPDATE: I got the Power Supply working, the motherboard's lights come on, the video card fan spins, BUT the CPU fan does NOT spin and there is no video. Whats the possibility of lacking power? In the mobo guide it says the use of a power supply providing a 2x4 12V connector is recommended (I do not have this connector) by the CPU manufacturer when using an Intel Extreme Edition (I'm using Core2Quad) UPDATE: Got it working, intstalling windows 7 now. THANKS GUYS!!

  Read the article

• How would you diagnose an integrated network card that doesn't show up on the device list?

  - by Tomer Gabel

  I've been setting up a server based around a Gigabyte GA-G33M-DS2R motherboard (G33, PCH9R with integrated Realtek 811B network device. I've enabled it in the BIOS, but it doesn't show up in the pre-boot PCI device list, isn't recognized by Windows (even after installing the chipset and networking drivers) and doesn't even show up via lspci. I've tried cycling power, disabling, cycling again, enabling, cycling again etc. to no avail. I'm sort of at a loss at this point; the board isn't under warranty anymore, but I'd rather not have to replace it. Any advice would be greatly appreciated...

  Read the article

• On Windows 7, how do I fix my cmd.exe icon and remove cruft from the jumplist

  - by sb3700

  Hi. When installing drivers for my Gigabyte motherboard, I installed a "Games" link which ran from a batch file. This was pinned to the taskbar by default. As a result, it changed the icon for cmd.exe to the icon for Games. I uninstalled the Games and it got rid of the icon leaving it with a white rectangle thing (I can post screenshots on request). There is also a link on the jumplist to open Games, which just opens a cmd window. I've tried rebuilding my icon cache as per Changing Windows 7 pinned taskbar icons, but this only removed the white rectangle icon, leaving me with no real icon. c:\windows\system32\cmd.exe still has the appropriate icon in explorer, just not on the taskbar. Any ideas on how to fix this annoyance?

  Read the article

• I have static noise in my speakers and headset

  - by Kazarion

  I have been having a problem with my computer where I am constantly getting static from the point I turn on my PC. I have changed Towers, Hard Drives, added and removed a Sound Blaster Xtreme Sound Card, used 3 different Headsets, and 2 sets of speakers. Lately I have noticed random dips in my frame rates when playing games. Is there any possibility that the graphics card could be causing the static with the possibility of it needing to go in for repairs? Specs: i5-3570K 3.40 GHZ Gigabyte GTX 570 8GB of Corsair Ram MB ASUS|P8Z77-V Z77 3TB Seagate Barracude HDD Rosewill 850W PSU Corsair A70 Heatsink

  Read the article

• SSD install - what do I need to watch out for when reconfiguring SATA ports?

  - by tim11g

  I installed a Samsung 840 SSD in a Windows 7 machine. It seems to be working fine, but I'm not seeing the expected performance. The AS SSD benchmark gives 76 for read and 138 for write. At the upper left of the benchmark it says "pciide - BAD" and "31K - BAD". I'm assuming the "pciide BAD" means the motherboard (Gigabyte GA-P35-DS4) is configured as IDE emulation and needs to change to native SATA. I don't know what the "31K" refers to. The bios settings look like this: I saw this article that indicates that changing the SATA mode of the boot drive can cause problems (Blue Screen): Error message occurs after you change the SATA mode of the boot drive What is the correct procedure to change the SATA Mode without causing a system failure? Apply the registry change from the MSFT article above first, then reboot and change the SATA mode? Will the SATA mode change in the BIOS affect other drives?

  Read the article

• VMWare ESX installation on sata disk

  - by ilansch

  I have a PC with Gigabyte H77 motherboard with Intel I5-3550 CPU 8 GB RAM 1600MHz and a 500GB Harddisk (7200RPM) - WD Sata III disk I wish to install esx on it and run some virtual machines on it. not alot, something like 2-3 VMs. My hardisk is Sata, is it possible to install ESX Server on it ? I am not worried about loading issues. When i try loading the installation it writes it cannot detect my disk (since its not SCSI disk). How can i bypass this ? or find a solution. thanks

  Read the article

• Suspected power supply issue? PC repeatedly whirs for some seconds and then dies.

  - by benwebdev

  I've come home today and switched on the PC I've built a few months ago only for the machine to whir for a few short seconds and then die. It repeats this until I disconnect the power lead. Nothing is output to the screen and this cut out happens very quickly after switching it on. What could this be and how could it be fixed? Is it the power supply? I'm in despair :-( My spec is below, everything is new and was bought and assembled within the last 6months, system has been fantastic until now. Power Supply: 620W CoolerMaster Real Power M620 Motherboard: Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Processor: Intel Core i7 930 2.80GHz @ 4.00GHz RAM: 6GB DDR3 OS Windows 7 64bit Sapphire HD 5770 Vapor-X 1GB Graphics card 1TB Hitachi HDD 720GB Seagate Barracuda HDD 350GB Seagate Barracuda HDD EMu 0404 PCI Soundcard D-Link PCI-E wireless card Samsung DVD RW drive

  Read the article

• Computer turns off and on after start ..then goes dead

  - by Shiki

  I built a new PC from the following components: - CPU: Intel Core i7 950 - MB: Gigabyte X58A-UD3R - RAM: 2x2gb i7 Corsair memory - VGA: Zotac AMP2 GTX260 - HDD: 1 GreenSATA HDD (Western Digital 500gb RE2) When I turn it on, it goes for a few seconds, fans at maximum speed, then turns off. The again, it starts by itself.. and goes with fans on max speed, nothing happens. First I suspected my PSU. It's a Chieftec 450AA PSU. After I borrowed a Chieftec 550AA PSU, I tried to start with that. Exact same story. Any idea ? Do I need a bigger PSU? Reason why its not localized. I never seen this turn on, off, on. If you give answer for that, it would already help people like me, with the same problem.

  Read the article

• Long wait until POST...

  - by Wesley

  Here are the specs to put things into context: ECS P4VXASD2+ (V5.0) motherboard Intel Pentium 4 Northwood 2.8 GHz (512 KB L2, 533 MHz FSB) 2x 512 MB PC2100 DDR266 RAM 128 MB NVIDIA GeForce FX 5200 AGP WD Caviar SE 80 GB IDE HDD Gigabyte CD-RW drive OKIA 300W ATX PSU So, everytime I try to boot up this computer, it takes at least 10-15 seconds before it will POST. All my other machines will post within 1-2 seconds, but this one takes a particularly long time. I've read suggestions from a Google search to swap the CMOS battery, check BIOS settings, and double check CMOS jumper. Still after follow those, it takes a while to POST. What else could be causing a long delay before POSTing?

  Read the article

• Why doesn't my computer work at full speed?

  - by kubilas

  My motherboard is a Gigabyte GA-8I915PL-G with an Intel Pentium 4 630 3,0 GHz which doesn't run at it's default speed. It's currently at FSB 800, CPU Host 200 and CPU 3000 MHz; but sometimes it runs at FSB 533, CPU Host 133 and CPU 2025 MHz. Sometimes it's even at FSB 75 and CPU 1128 MHz. When I configure the default settings in Easy Tune then my computer doesn't work. Sometimes I need to clear the CMOS so I can set the default settings in the BIOS, but that doesn't always help. I've updated the BIOS, what else can I do to fix this problem?

  Read the article

• X58 RAID 10 - Am I forced to use Sata2?

  - by Avi

  I'm building a new dev computer. It will be running a few VMWare Worksation virtual machines. I was advised on Serverfault to use Raid10 for performance. Raid 10 uses 4 disks. I contacted my supplier who suggested a gigabyte X58A motherboard and 4 Western Digital Caviar black 6Gb/s disks. I have checked the spec for the X58A board, however, and it says: SATA 3Gb/s: RAID 0, RAID 1, RAID 5, and RAID 10 SATA 6Gb/s: RAID 0, and RAID 1. I'm losing half the bandwidth because I'm forced to use SATA2! What should I do?

  Read the article

• Setting up Ubuntu Server for hosting Java web applications

  - by Denis Hoss

  I'm trying to set up an Web Server running Ubuntu server to host some Java web applications, with MySQL running on it, an so on .. here is the tutorial I follow: perfect server ubuntu 11.10 The server configuration is: CPU S1155 INTEL Pentium G850 2.9GHz VGA 5GTs 3MB 65W MB Gigabyte GA-H77-D3H Ram 4x4Gb HDD 5x1TB Seagate (4 in RAID5 and 1 for Backup) The problem is that when I am trying to install the Server version of Ubuntu, when the installer asks me whether to activate ATA RAID Devices, and I click yes, he sees only that one, if I click no, he sees all 5 HDD's separate without any RAID, is this normal? I also tried to install the Desktop version on RAID5, but after restart, Ubuntu does't want to boot up, an underscore stands on the top of the screen. I am a newbie in servers and their configuration, in fact I am developer. I need a help from you guys.

  Read the article

• Windows 7 - Windows 8 dual boot installation error

  - by Nikhil

  I am trying to dual boot Windows 8 with Windows 7 . But I keep getting an error while selecting the drive to install on . The error is ""Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information." " . What might be the problem ? Also previously I tried to install only Windows 7 on my HDD . I downloaded the ISO from digital river . Made bootable usb . I got the same above error . But when I tried to install it via other usb which had pirated Windows 7 downloaded from torrents it gave no error . My system config is Motherboard - Gigabyte G41 MT S2P HDD - 160 GB SATA RAM - 8 GB Help !!!

  Read the article

• recommendations for a lightweight linux distribution for a test server

  - by Jack

  I'm planning on setting up a test server to experiment with some application servers (tomcat/jboss/...) and with some portals. Now the machine I've set aside for this is lightweight CPU/GPU wise(Atom D510, 4 gigabyte ram, 500 GiB hdd, onboard GPU). But it should suffice for most things, I'm more interested in the stability of JBoss/Tomcat for my purposes than the stability. However I'm having a bit of trouble picking an appropriate distribution size/performance/setup time wise/security wise since it seems I can't sneeze without another distribution popping up. I've been thinking about going for Fedora since I've read that that distribution has been optimized for Atom, but I'm not really familiar with it. My experience with Linux has mostly been limited to Ubuntu and some tinkering with puppylinux. I'm not afraid to get my hands dirty using the command line. I'm not planning on starting a discussion per se, mostly the pros/cons that people have encountered with some distributions

  Read the article

• df says disk is full, but it is not

  - by Chris

  On a virtualized server running Ubuntu 10.04, df reports the following: # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 7.4G 7.0G 0 100% / none 498M 160K 498M 1% /dev none 500M 0 500M 0% /dev/shm none 500M 92K 500M 1% /var/run none 500M 0 500M 0% /var/lock none 500M 0 500M 0% /lib/init/rw /dev/sda3 917G 305G 566G 36% /home This is puzzling me for two reasons: 1.) df says that /dev/sda1, mounted at /, has a 7.4 gigabyte capacity, of which only 7.0 gigabytes are in use, yet it reports / being 100 percent full; and 2.) I can create files on / so it clearly does have space left. Possibly relevant is that the directory /www is a symbolic link to /home/www, which is on a different partition (/dev/sda3, mounted at /home). Can anyone offer suggestions on what might be going on here? The server appears to be working without issue, but I want to make sure there's not a problem with the partition table, file systems or something else which might result in implosion (or explosion) later.

  Read the article

• Windows 7 Refuses To Install To A Partition

  - by PP

  I have 4 HDDs in my PC on a Gigabyte EP45-UD3 rev1.0 motherboard on SATA ports 0-3 and running AHCI mode. Windows 7 refuses to let me install to any partitions or disks I select saying Setup was unable to create a new system partition or locate an existing system partition. I will get to the bottom of this, after I sacrifice my Friday nights and weekends to Microsoft (they don't just want my money, they want my soul). Keep tuned, if no one has the answer, I will find one. I suspect I have to rip out 3 HDDs so that the n00bs at Microsoft can actually deal with spinning media. Really angers me how paid-for-products are so inferior to Linux they don't even qualify to be called "software".

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >