Search Results

Search found 37348 results on 1494 pages for 'low end hardware'.

Page 7/1494 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

  • Workstation hardware at does your company buy developers?

    - by Bosh
    I'm curious to know what workstation hardware companies are devoting to you, as a developer -- and how much they're spending. I'd consider this thread a big success if I could shed some light on these questions: Do engineers at big companies use substantially different hardware than engineers at start-ups companies? Does a fresh developer recruit at Google get substantially different hardware from someone in the same position at Microsoft or Yahoo!? Do programmers in more senior positions have more powerful hardware on their desks? Does anyone think faster hardware makes more efficient engineers?

    Read the article

  • Feeding a Dog Remotely - hardware?

    - by RobDude
    I'm looking for a way to, remotely, activate some sort of treat dispenser. I'm not a hardware guy, and I'm sure that conceptually, this is very easy. But I don't know how to begin. I haven't found any products designed to do exactly this. Perhaps some sort of beginning robotics kit could do it?

    Read the article

  • Diagnosing iMac Hardware?

    - by Covar
    Recently my first generation Intel iMac that I've had since 2006 has begun to lock up and restart on me. Before I run off and spend $1500-$2000 on a new iMac, is there any good way to diagnose the hardware? I would like to know exactly what is going wrong so I know I won't be wasting my money when there is an easier fix.

    Read the article

  • HP Proliant G7 hardware RAID configuration automation with ribcl

    - by karthik
    I have been trying to automate hardware RAID configuration of HP proliant machines before OS installation (So I can not use hpacucli) ssh into iLO3 doesn't have option for RAID configuration I use ribcl but there is no command for RAID config, however I see this under the command GET_EMBEDDED_HEALTH. <STORAGE> <CONTROLLER> <LABEL VALUE="Controller on System Board"/> <STATUS VALUE="OK"/> <CONTROLLER_STATUS VALUE="OK"/> <SERIAL_NUMBER VALUE="50014380215F0070"/> <MODEL VALUE="HP Smart Array P420i Controller"/> <FW_VERSION VALUE="3.41"/> <DRIVE_ENCLOSURE> <LABEL VALUE="Port 1I Box 1"/> <STATUS VALUE="OK"/> <DRIVE_BAY VALUE="04"/> </DRIVE_ENCLOSURE> <DRIVE_ENCLOSURE> <LABEL VALUE="Port 2I Box 0"/> <STATUS VALUE="OK"/> <DRIVE_BAY VALUE="01"/> </DRIVE_ENCLOSURE> <LOGICAL_DRIVE> <LABEL VALUE="01"/> <STATUS VALUE="OK"/> <CAPACITY VALUE="68 GB"/> <FAULT_TOLERANCE VALUE="RAID 0"/> <PHYSICAL_DRIVE> <LABEL VALUE="Port 1I Box 1 Bay 3"/> <STATUS VALUE="OK"/> <SERIAL_NUMBER VALUE="6TA0N3SZ0000B231CYDT"/> <MODEL VALUE="EH0072FAWJA"/> <CAPACITY VALUE="68 GB"/> <LOCATION VALUE="Port 1I Box 1 Bay 3"/> <FW_VERSION VALUE="HPDH"/> <DRIVE_CONFIGURATION VALUE="Configured"/> </PHYSICAL_DRIVE> </LOGICAL_DRIVE> </CONTROLLER> </STORAGE> My question is, is there a way I modify/create this xml piece (say I have 2 Logical drive with one spare) and reboot the server it takes effect ? If this approach is not correct are there any other ways to automate hardware raid config ?

    Read the article

  • Need a hardware solution for remote controling a PC

    - by ShacharWeis
    Hello We have kiosk computers scattered around the country, and are using VNC to control them. But VNC has limitations (only works if the OS is intact, for instance). I want to be able to control the computer even if it is stuck in boot. Is there a cheap hardware solution for remote controlling a PC ? Thanks.

    Read the article

  • Hardware needed for receiving and recording videcalls in Asterisk

    - by jneves
    I'm planning an Asterisk configuration that should record videocalls and then feed it to an application. From what I've researched, it seems like app_h234m is the way to go (http://www.voip-info.org/wiki/view/Asterisk+app_h324m+compatibility). But it's not clear to me what are the hardware requirements for this. Can someone enlighten me?

    Read the article

  • Oracle Linux and Oracle VM Hardware Certification Program

    - by Durgam Vahia
    The Oracle Linux and Oracle VM are continuing to see growth in IHV (Independent Hardware Vendor) ecosystem. The Oracle Linux and Oracle VM Hardware Certification Program, also referred as HCL, provides a formal means for hardware vendors to work with Oracle to establish high quality support for the certified hardware platform. Since the beginning of the program, number of hardware partners have certified range of server platforms on Oracle Linux and Oracle VM. Currently, HCL lists over 400 certifications from 10 server vendors and the list continues to grow at a rapid pace. New hardware certification involves close collaboration between Oracle and server partner to ensure that adequate testing is performed on the target server and results are thoroughly reviewed. This rigorous process ensures that when new hardware platform is listed on HCL, it has full support from both Oracle and the respective partner. Additionally, once a certification is achieved with Oracle Linux with the current version of Unbreakable Enterprise Kernel, future minor updates of the software continue to carry over the certification, reducing the need for a re-certification. For the complete list of certified hardware, please visit Oracle Linux and Oracle VM Certified Hardware. Also refer to Frequently Asked Questions for more information.

    Read the article

  • Writing low latency Java

    - by user997112
    Are there any Java-specific techniques (things which wouldnt apply to C++) for writing low latency code, in Java? I often see Java low latency roles and they ask for experience writing low latency Java- which sometimes seems a little bit of an oxymoron. The only think I could think of is experience with JNI, outsourcing I/O calls to native code. Also possibly using the disruptor pattern, but thats not an actual technology. Are there any Java specific tips for writing low latency code? I am aware there is a Real Time Java Spec, but I have been warned real-time is not the same as low latency....

    Read the article

  • release does not free up memory in low-memory condidtion

    - by user322945
    I am trying to follow the Apple's recommendation to handle low-memory warnings (found in Session 416 of WWDC 2009 videos) by freeing up resources used by freeing up my dataController object (referenced in my app delegate) that contains a large number of strings for read from a plist: - (void)applicationDidReceiveMemoryWarning:(UIApplication *)application { [_dataController release]; _dataController = nil; NSLog([NSString stringWithFormat:@"applicationDidReceiveMemoryWarning bottom... retain count:%i", [_dataController retainCount]]); } But when I run ObjectAlloc within Instruments and simulate a Low-Memory Condition, I don't see a decrease in the memory used by my app even though I see the NSLog statements written out and the retain count is zero for the object. I do pass references to the app delegate around to some of the view controllers. But the code above releases the reference to the _dataController object (containing the plist data) so I would expect the memory to be freed. Any help would be appreciated.

    Read the article

  • UITableView's cellForRowAtIndexPath is not getting called after low memory warning

    - by Jinesh
    I am new to COCOA and Objective C. I am working on an application which have two controllers with one table view in each, clicking an item form this table will lead to another controller to be pushed to the stack. All was working fine till i started handling low memory warning in app delegate. What i am doing in app delegate's applicationDidReceiveMemoryWarning is, deleting all of my model and popping out all controllers to its root view using popToRootViewControllerAnimated. Now my problem starts, once low mem warning is received table's cellForRowAtIndexPath is not getting called. All other methods of UITableViewDataSource is properly called. What i get on screen is a blank white screen. I am testing my app in iPhone OS 3.0 and development is done in Xcode V 3.1.3. Hope you guys can help me to nail this. Thanks in advance, Jinesh.

    Read the article

  • low latency data link pc to android

    - by steveh
    can anyone recommend a method for low latency bi-directional com link between my pc app and android slave app. the app i have works now via wifi but the latency is too slow (about 300mS), i'm looking to get it down to 10mS or so. the android is acting like a glorified remote control to the game on the pc. the apk displays a low res image and sends button presses back to the game and the round trip need to be quick i'm thinking the only option beside the network, is to connect a usb cable but i don't see a lot of support for that path and not even sure it would be lower latency than wifi any ideas please?

    Read the article

  • Minecraft server hosting hardware specifications [on hold]

    - by Andrew Wright
    I am planning on purchasing a server to rent off Minecraft game servers, largely to friends. I am planning on purchasing a 128GB RAM server to save on colocation costs (as I am likely to need more than 32GB and would have to rent 2U of space...) I am hoping for some advice about the processing power needed to deal with this level of RAM. The servers will be run in a shared environment on linux in a VM to make backups easier. The server I have in mind is dual CPU. I have been considering at the low end dual Xeon E5-2609V2 Quad-Core 2.5Ghz, and at the high end dual Xeon E5-2650V2 Eight-Core 2.6Ghz. The difference between these is 6.4 GT/s and 8 GT/s and £3000 for the lower spec server, £4300 for the higher spec. I was hoping I could get advice about whether it is worth paying for the extra/higher speed processor or if I would be wasting my money? Thank you for any help - I appreciate that this is not directly related to professional system administration.

    Read the article

  • CPU Usage at 100% with "Hardware Interrupts"

    - by eventualEntropy
    After turning on my desktop one day, I found that my CPU usage was maxed out at 100%, with 99% of that going to hardware "Interrupts". I tried to enable/disable all my devices one by one through the device manager, and found that I could get the CPU usage used by the Interrupts down to 50% by disabling all devices labelled "USB Host Controller" (except the ones for the mouse/keyboard). I found that I also got 10-20% more from disabling "High Definition Audio Controller". Following the tutorial at: http://www.msfn.org/board/topic/140263-how-to-get-the-cause-of-high-cpu-usage-by-dpc-interrupt/ Led me to similar conclusions (that is, that the culprit is mostly "USB Host Controller"): I've tried updating my asus motherboard driver and my video card driver. This is on Windows 7 64 bit. I've spent hours trying to figure this out and I'm running out of ideas short of formatting (which might still not fix it!).

    Read the article

  • Virtual server hardware to simulate 3-4 node web farm

    - by frankadelic
    I would like to get a dedicated server to run VMWare, VirtualBox, or similar. On this box, I would like to host 3-4 virtual instances of Linux, to act as nodes in a web farm. Performance is not that important, this would only be for testing and experimenting. I need something sub $1000 (including tax/shipping). Can someone recommend a pre-built server that would do the trick? I am pretty ignorant of hardware so building one is not going to work for me. Also, would I need multiple network cards to simulate a web farm or can the virtualization software handle that for me. Thanks

    Read the article

  • How to Diagnose a Pre-Operating System Load or Hardware Issue

    - by soandos
    How can I find out if my problem is hardware based? If it is, how can I figure out what component is to blame How can I fix other pre-operating system issues? As an aside, what are all of these components responsible for, and if they break, what can go wrong? (This question comes up frequently, and the suggested solutions are usually the same. This community wiki is an attempt to serve as the definitive, most comprehensive answer possible. Feel free to add your contributions via edits.)

    Read the article

  • Hardware asset management systems

    - by Dave
    I need to track a bunch of specialized testing tools, They are hardware devices used for testing other equipement. Each device has a serial number and is sent out for use in testing. Occasionally they break and have to be sent to the manufacture for repair. I'm looking for an open source application (preferably a webapp) to help manage them. Right now we're using Excel and it's not scaling as we get more tools. They aren't computers so all the standard IT asset management systems don't really fit the bill. I found h-harmony, but that project seems dead?

    Read the article

  • VirtualBox won't use any kind of hardware acceleration

    - by burnersk
    I see an problem with VirtualBox hardware acceleration functionality... My system configuration: MSI PH67A-C43 (B3) (BIOS: 2.70) Intel Core i5-2400 Windows 7 Professional SP1 64-bit Oracle VirtualBox 4.1.10 Oracle VirtualBox Extension Pack 4.1.10 I can select the individual acceleration options such as PAE/NX, VT-x/VMD-V or Nested Paging within VM-Settings but if I start the VM the accelerations will be disabled as of the tooltip from CPU (right next to shared folders). Each acceleration is "Disabled". Does this sounds familar to anybody? How can I solve this?

    Read the article

  • Rules to choose hardware for OLTP systems (sql server)

    - by Roman Pokrovskij
    Ok. We know database size, number of concurrent users, number of transactions per minute; should choose number of processors, RAID, RAM, mirroring and clustering. There are no exact rule.. but may be there are no rules at all? In my practice in every case I have "legacy" system, and after some inspections and interview I can form an opinion how hardware and design can be improved. But every time when I meet "absolutely" new system (I guess there are no new systems, but sometimes are such tasks) I can't say anything trustful. So I'm interesting how people deal with such tasks? They map task on theirs experience or have some base formulas?

    Read the article

  • Server 2008 R2 Datacenter (and all other version) not detecting hardware

    - by Mitchell Skurnik
    I upgraded my ASUS KFN32-D SLI/SAS motherboard to the latest BIOS version and swapped out the 2 dual-core procs with 2 quad core procs. After installing Server 2008 Datacenter onto the system I noticed that it was not connected to the network. I open device manager and see no network adapters. I have to go up to View - Show hidden devices to even see the virtual WAN Miniport adapters. This problem happens in Vista and Windows 7 (all x64). What is even stranger is it all works in x86 mode. What in x64 could be causing windows to not even detect hardware that works in x86? Is the boot manager possibly the culprit?

    Read the article

  • Windows 2008 Server on VMWare (hardware)

    - by Bill
    I want to setup a single server to run a few virtual servers for our datacenter. I do not have a lot of money to spend so I am trying to gain bang for the buck. My budget is around $2,000. So I was thinking about building the following as the VMWare physical server: Intel iCore 7 950 (LGA1366, 4 cores,8 threads) Gigabyte GA-X58-USB3 LGA 1366 X58 ATX Intel Motherboard 24 GB of Viper II Series, Sector 7 Edition, Extreme Performance DDR3-1600 (PC3-12800) CL9 Triple Channel Memory VelociRaptor 300GB 10,000 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive I am planning on running the newest version of VMWare ESXi (64-bit). On these I am planning on running a few various servers: Windows 2008 Server R2 w/ IIS (several custom built ASP.NET Apps) Windows 2008 Server R2 w/ MS SQL 2008 Database Server Linux Web Server w/ Several WordPress Blogs (XAMPP?) Windows 2008 Server R2 w/ IIS (DEV ENVIRONMENT) Windows 2008 Server R2 w/ MS SQL 2008 Database Server (DEV ENVIRONMENT) In your opinion, will this hardware be sufficient to run the above load with room for possible 2-3 more virtual machines (probably lightweight web servers)?

    Read the article

  • Hardware specs for web cache

    - by Raj
    I am looking for recommendations for hardware specs for a server that needs to be a web cache for a user population of about 2,000 concurrent connections. The clients are viewing segmented HTTP video in bitrates ranging from 150kbps to 2mbps. Most video is "live" meaning segments of 2-10 secs each, of which 100 or so are maintained at a time. There are also some pre-recorded fixed length videos. How would I go about doing the provisioning calculation for such a server: What kind of HDD (SSD?), how many NICs how much RAM etc? I am thinking of using Varnish on Linux, all the RAM I can get my hands on, 2 CPUs with 6-8 cores each.

    Read the article

  • Does programmable hardware exist to allow hardware to be programmed by computers?

    - by agentbanks217
    I am a programmer and I have never really dealt with the hardware of anything, only software. I want to start building things that I can control from my computer using programming. My question is are there such devices on the market that have a programmable interface or API? For example, I want to build a automated window blinds opening/closing device, and I would like to be able to control it from my computer e.g. writing an app or some code to schedule them when to open and close. I would like to know if there are any devices that can be programmed to do that (the computer part)? Thanks!

    Read the article

  • ext4 filesystem corruption -- maybe hardware error?

    - by pts
    I'm getting these errors in dmesg after about half an hour after I turn on the computer: [ 1355.677957] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1318420: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251700offset=0(0), inode=1802725748, rec_len=179136, name_len=32 [ 1355.677973] Aborting journal on device sda2-8. [ 1355.678101] EXT4-fs (sda2): Remounting filesystem read-only [ 1355.690144] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1318416: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251699offset=0(0), inode=2194783952, rec_len=53280, name_len=152 [ 1356.864720] EXT4-fs error (device sda2): htree_dirblock_to_tree: inode #1312795: (comm updatedb.mlocat) bad entry in directory: directory entry across blocks - block=5251176offset=1460(13748), inode=1432317541, rec_len=208208, name_len=119 /dev/sda is an SSD, and it's using the noop scheduler. /etc/fstab entry: UUID=acb4eefa-48ff-4ee1-bb5f-2dccce7d011f / ext4 errors=remount-ro,noatime,discard,user_xattr 0 1 System information: $ cat /proc/mounts | grep /dev/sd /dev/sda1 /boot ext2 rw,noatime,errors=continue 0 0 $ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.04 DISTRIB_CODENAME=lucid DISTRIB_DESCRIPTION="Ubuntu 10.04.3 LTS" $ uname -a Linux leetpad 2.6.35-30-generic-pae #61~lucid1-Ubuntu SMP Thu Oct 13 21:14:29 UTC 2011 i686 GNU/Linux I've run memtest for 7 hours, it didn't found any memory errors. Any obvious ideas what can go wrong in this case? The most reasonable thing I can imagine is that the SSD is silently dropping some write requests, which eventually leads to an EXT4 filesystem inconsistency (but no disk I/O errors). How can this happen? Is there a relevant configuration option I should ensure to be set correctly? What tools should I use to diagnose the hardware failures? Would it be possible to diagnose the SSD failure without overwriting data?

    Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >