Search Results

Search found 707 results on 29 pages for 'timing'.

Page 7/29 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• Ubuntu 12.04 Samba File Server timeout on large file

  - by phileaton

  I am a beginner with servers. I checked the error logs for Samba and it appears that Samba is timing out when I transfer large files. I can successfully add pdfs for instance to my file server. However, I tried to add a large 1.2gb video file and it did not succeed. This is the error in the log: smbd/process.c:244(read_packet_remainder) read_fd_with_timeout failed for client 0.0.0.0 read error = NT_STATUS_CONNECT$ Is there a way I can stop it from timing out? Any pointers would be great! Thanks!

  Read the article

• Very slow disk performance on Dell PowerEdge 2950 w/ PERC 6/i running RAID 10

  - by vocoder

  I recently set up a server running Ubuntu 10.04 LTS on a Dell PowerEdge 2950 server - it has 6 500 gb 7200RPM SATA drives setup in a RAID 10 config. I am seeing extremely poor disk performance - the RAID array reports all disks are normal and using MegaCLI, it looks like the BBU is fine. hdparm -tT /dev/sda reports: Timing cached reads: 90 MB in 2.05 seconds = 43.96 MB/sec Timing buffered disk reads: 24 MB in 3.11 seconds = 7.72 MB/sec So as you can see, it takes forever to something as simple as an apt-get upgrade and even logging into the server. How do I go about troubleshooting what is causing this? I upgraded the firmware on the PERC 6i RAID controller to the latest, but didn't see any improvements.

  Read the article

• Various problems with software raid1 array built with Samsung 840 Pro SSDs

  - by Andy B

  I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

  Read the article

• How to create a VBA form to match excel value to the name of the worksheet in the same workbook?

  - by cody_q

  I am working on a self created VBA form. It has submit button and takes in entries such as destination, timing and budget. I have a excel worksheet named "bali". it consists of the destination's available airline,timing and budget. I would like to create a method that could get the inserted destination eg. bali when the user clicked submit button and then match it to display and show the content of the worksheet named "bali" in another new sheet or a form. Anyone could help me with this by providing a step by step code ? Thank you. Cody

  Read the article

• ipfw is blocking access to a script

  - by user225551

  I need to figure out how to troubleshoot why ipfw is blocking my script. This script parses out some rss feeds over the net. I have about 10 different feed urls. About 5 or 6 of these urls are returning xml, the others are timing out. If I turn the firewall off, they will all work. The issue I'm having is that I have no idea what port I need to open for the urls that are timing out. Is there a command that will show me this?

  Read the article

• Independence Day for Software Components &ndash; Loosening Coupling by Reducing Connascence

  - by Brian Schroer

  Today is Independence Day in the USA, which got me thinking about loosely-coupled “independent” software components. I was reminded of a video I bookmarked quite a while ago of Jim Weirich’s “Grand Unified Theory of Software Design” talk at MountainWest RubyConf 2009. I finally watched that video this morning. I highly recommend it. In the video, Jim talks about software connascence. The dictionary definition of connascence (con-NAY-sense) is: 1. The common birth of two or more at the same time 2. That which is born or produced with another. 3. The act of growing together. The brief Wikipedia page about Connascent Software Components says that: Two software components are connascent if a change in one would require the other to be modified in order to maintain the overall correctness of the system. Connascence is a way to characterize and reason about certain types of complexity in software systems. The term was introduced to the software world in Meilir Page-Jones’ 1996 book “What Every Programmer Should Know About Object-Oriented Design”. The middle third of that book is the author’s proposed graphical notation for describing OO designs. UML became the standard about a year later, so a revised version of the book was published in 1999 as “Fundamentals of Object-Oriented Design in UML”. Weirich says that the third part of the book, in which Page-Jones introduces the concept of connascence “is worth the price of the entire book”. (The price of the entire book, by the way, is not much – I just bought a used copy on Amazon for $1.36, so that was a pretty low-risk investment. I’m looking forward to getting the book and learning about connascence from the original source.) Meanwhile, here’s my summary of Weirich’s summary of Page-Jones writings about connascence: The stronger the form of connascence, the more difficult and costly it is to change the elements in the relationship. Some of the connascence types, ordered from weak to strong are: Connascence of Name Connascence of name is when multiple components must agree on the name of an entity. If you change the name of a method or property, then you need to change all references to that method or property. Duh. Connascence of name is unavoidable, assuming your objects are actually used. My main takeaway about connascence of name is that it emphasizes the importance of giving things good names so you don’t need to go changing them later. Connascence of Type Connascence of type is when multiple components must agree on the type of an entity. I assume this is more of a problem for languages without compilers (especially when used in apps without tests). I know it’s an issue with evil JavaScript type coercion. Connascence of Meaning Connascence of meaning is when multiple components must agree on the meaning of particular values, e.g that “1” means normal customer and “2” means preferred customer. The solution to this is to use constants or enums instead of “magic” strings or numbers, which reduces the coupling by changing the connascence form from “meaning” to “name”. Connascence of Position Connascence of positions is when multiple components must agree on the order of values. This refers to methods with multiple parameters, e.g.: eMailer.Send("[email protected]", "[email protected]", "Your order is complete", "Order completion notification"); The more parameters there are, the stronger the connascence of position is between the component and its callers. In the example above, it’s not immediately clear when reading the code which email addresses are sender and receiver, and which of the final two strings are subject vs. body. Connascence of position could be improved to connascence of type by replacing the parameter list with a struct or class. This “introduce parameter object” refactoring might be overkill for a method with 2 parameters, but would definitely be an improvement for a method with 10 parameters. This points out two “rules” of connascence:  The Rule of Degree: The acceptability of connascence is related to the degree of its occurrence. The Rule of Locality: Stronger forms of connascence are more acceptable if the elements involved are closely related. For example, positional arguments in private methods are less problematic than in public methods. Connascence of Algorithm Connascence of algorithm is when multiple components must agree on a particular algorithm. Be DRY – Don’t Repeat Yourself. If you have “cloned” code in multiple locations, refactor it into a common function.   Those are the “static” forms of connascence. There are also “dynamic” forms, including… Connascence of Execution Connascence of execution is when the order of execution of multiple components is important. Consumers of your class shouldn’t have to know that they have to call an .Initialize method before it’s safe to call a .DoSomething method. Connascence of Timing Connascence of timing is when the timing of the execution of multiple components is important. I’ll have to read up on this one when I get the book, but assume it’s largely about threading. Connascence of Identity Connascence of identity is when multiple components must reference the entity. The example Weirich gives is when you have two instances of the “Bob” Employee class and you call the .RaiseSalary method on one and then the .Pay method on the other does the payment use the updated salary?   Again, this is my summary of a summary, so please be forgiving if I misunderstood anything. Once I get/read the book, I’ll make corrections if necessary and share any other useful information I might learn.   See Also: Gregory Brown: Ruby Best Practices Issue #24: Connascence as a Software Design Metric (That link is failing at the time I write this, so I had to go to the Google cache of the page.)

  Read the article

• Know more about Enqueue Deadlock Detection

  - by Liu Maclean(???)

  ??? ORACLE ALLSTAR???????????????????,??????? ???????enqueue lock?????????3 ??????,????????????????????????????ora-00060 dead lock??process???3s: SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE 10.2.0.5.0 Production TNS for Linux: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com PROCESS A: set timing on; update maclean1 set t1=t1+1; PROCESS B: update maclean2 set t1=t1+1; PROCESS A: update maclean2 set t1=t1+1; PROCESS B: update maclean1 set t1=t1+1; ??3s? PROCESS A ?? ERROR at line 1: ORA-00060: deadlock detected while waiting for resource Elapsed: 00:00:03.02 ????Process A????????????? 3s,?????????????,??????? ?????????? ???????: SQL> col name for a30 SQL> col value for a5 SQL> col DESCRIB for a50 SQL> set linesize 140 pagesize 1400 SQL> SELECT x.ksppinm NAME, y.ksppstvl VALUE, x.ksppdesc describ 2 FROM SYS.x$ksppi x, SYS.x$ksppcv y 3 WHERE x.inst_id = USERENV ('Instance') 4 AND y.inst_id = USERENV ('Instance') 5 AND x.indx = y.indx 6 AND x.ksppinm='_enqueue_deadlock_scan_secs'; NAME VALUE DESCRIB ------------------------------ ----- -------------------------------------------------- _enqueue_deadlock_scan_secs 0 deadlock scan interval SQL> alter system set "_enqueue_deadlock_scan_secs"=18 scope=spfile; System altered. Elapsed: 00:00:00.01 SQL> startup force; ORACLE instance started. Total System Global Area 851443712 bytes Fixed Size 2100040 bytes Variable Size 738198712 bytes Database Buffers 104857600 bytes Redo Buffers 6287360 bytes Database mounted. Database opened. PROCESS A: SQL> set timing on; SQL> update maclean1 set t1=t1+1; 1 row updated. Elapsed: 00:00:00.06 Process B SQL> update maclean2 set t1=t1+1; 1 row updated. SQL> update maclean1 set t1=t1+1; Process A: SQL> SQL> alter session set events '10704 trace name context forever,level 10:10046 trace name context forever,level 8'; Session altered. SQL> update maclean2 set t1=t1+1; update maclean2 set t1=t1+1 * ERROR at line 1: ORA-00060: deadlock detected while waiting for resource  Elapsed: 00:00:18.05 ksqcmi: TX,90011,4a9 mode=6 timeout=21474836 WAIT #12: nam='enq: TX - row lock contention' ela= 2930070 name|mode=1415053318 usn<<16 | slot=589841 sequence=1193 obj#=56810 tim=1308114759849120 WAIT #12: nam='enq: TX - row lock contention' ela= 2930636 name|mode=1415053318 usn<<16 | slot=589841 sequence=1193 obj#=56810 tim=1308114762779801 WAIT #12: nam='enq: TX - row lock contention' ela= 2930439 name|mode=1415053318 usn<<16 | slot=589841 sequence=1193 obj#=56810 tim=1308114765710430 *** 2012-06-12 09:58:43.089 WAIT #12: nam='enq: TX - row lock contention' ela= 2931698 name|mode=1415053318 usn<<16 | slot=589841 sequence=1193 obj#=56810 tim=1308114768642192 WAIT #12: nam='enq: TX - row lock contention' ela= 2930428 name|mode=1415053318 usn<<16 | slot=589841 sequence=1193 obj#=56810 tim=1308114771572755 WAIT #12: nam='enq: TX - row lock contention' ela= 2931408 name|mode=1415053318 usn<<16 | slot=589841 sequence=1193 obj#=56810 tim=1308114774504207 DEADLOCK DETECTED ( ORA-00060 ) [Transaction Deadlock] The following deadlock is not an ORACLE error. It is a deadlock due to user error in the design of an application or from issuing incorrect ad-hoc SQL. The following information may aid in determining the deadlock: ??????Process A?’enq: TX – row lock contention’ ?????ORA-00060 deadlock detected????3s ??? 18s , ???hidden parameter “_enqueue_deadlock_scan_secs”?????,????????0? ??????????: SQL> alter system set "_enqueue_deadlock_scan_secs"=4 scope=spfile; System altered. Elapsed: 00:00:00.01 SQL> alter system set "_enqueue_deadlock_time_sec"=9 scope=spfile; System altered. Elapsed: 00:00:00.00 SQL> startup force; ORACLE instance started. Total System Global Area 851443712 bytes Fixed Size 2100040 bytes Variable Size 738198712 bytes Database Buffers 104857600 bytes Redo Buffers 6287360 bytes Database mounted. Database opened. SQL> set linesize 140 pagesize 1400 SQL> show parameter dead NAME TYPE VALUE ------------------------------------ -------------------------------- ------------------------------ _enqueue_deadlock_scan_secs integer 4 _enqueue_deadlock_time_sec integer 9 SQL> set timing on SQL> select * from maclean1 for update wait 8; T1 ---------- 11 Elapsed: 00:00:00.01 PROCESS B SQL> select * from maclean2 for update wait 8; T1 ---------- 3 SQL> select * from maclean1 for update wait 8; select * from maclean1 for update wait 8 PROCESS A SQL> select * from maclean2 for update wait 8; select * from maclean2 for update wait 8 * ERROR at line 1: ORA-30006: resource busy; acquire with WAIT timeout expired Elapsed: 00:00:08.00 ???????? ??? select for update wait?enqueue request timeout ?????8s? ,???????”_enqueue_deadlock_scan_secs”=4(deadlock scan interval),?4s???deadlock detected,????Process A????deadlock ???, ??????? ??Process A?????8s?raised??”ORA-30006: resource busy; acquire with WAIT timeout expired”??,??ORA-00060,?????process A???????? ????????”_enqueue_deadlock_time_sec”(requests with timeout <= this will not have deadlock detection)???,?enqueue request time < “_enqueue_deadlock_time_sec”?Server process?????dead lock detection,?????????enqueue request ??????timeout??????(_enqueue_deadlock_time_sec????5,?timeout<5s),???????????????;??????timeout>”_enqueue_deadlock_time_sec”???,Oracle????????????????????? ??????????: SQL> show parameter dead NAME TYPE VALUE ------------------------------------ -------------------------------- ------------------------------ _enqueue_deadlock_scan_secs integer 4 _enqueue_deadlock_time_sec integer 9 Process A: SQL> set timing on; SQL> select * from maclean1 for update wait 10; T1 ---------- 11 Process B: SQL> select * from maclean2 for update wait 10; T1 ---------- 3 SQL> select * from maclean1 for update wait 10; PROCESS A: SQL> select * from maclean2 for update wait 10; select * from maclean2 for update wait 10 * ERROR at line 1: ORA-00060: deadlock detected while waiting for resource Elapsed: 00:00:06.02 ??????? select for update wait 10?10s??, ?? 10s?????_enqueue_deadlock_time_sec???(9s),??Process A???????? ???????????????6s ???????_enqueue_deadlock_scan_secs?4s ? ???????????,???????????_enqueue_deadlock_scan_secs?????????3???? ??: enqueue lock?????????????? 1. ?????????deadlock detection??3s????, ????????_enqueue_deadlock_scan_secs(deadlock scan interval)???,??????0,????????_enqueue_deadlock_scan_secs?????????3???, ?_enqueue_deadlock_scan_secs=0 ??3s??, ?_enqueue_deadlock_scan_secs=4??6s??,????? 2. ???????_enqueue_deadlock_time_sec(requests with timeout <= this will not have deadlock detection)???,?enqueue request timeout< _enqueue_deadlock_time_sec(????5),?Server process?????????enqueue request timeout>_enqueue_deadlock_time_sec ????_enqueue_deadlock_scan_secs???????, ??request timeout??????select for update wait [TIMEOUT]??? ??: ???10.2.0.1?????????2?hidden parameter , ???patchset 10.2.0.3????? _enqueue_deadlock_time_sec, ?patchset 10.2.0.5??????_enqueue_deadlock_scan_secs? ?????RAC???????????10s, ???????_lm_dd_interval(dd time interval in seconds) ,????????8.0.6???? ???????????????,??????,  ?10g???????60s,?11g???????10s?  ???????11g??_lm_dd_interval?????????????,?????11g??LMD????????????,??????????RAC?LMD?Deadlock Detection???????CPU,???11g?Oracle????Team???LMD????????CPU????: ????????11g?LMD???????,???????11g??? UTS TRACE ????? DD???: SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production CORE 11.2.0.3.0 Production TNS for Linux: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production SQL> SQL> select * from global_name 2 ; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com SQL> alter system set "_lm_dd_interval"=20 scope=spfile; System altered. SQL> startup force; ORACLE instance started. Total System Global Area 1570009088 bytes Fixed Size 2228704 bytes Variable Size 1325403680 bytes Database Buffers 234881024 bytes Redo Buffers 7495680 bytes Database mounted. Database opened. SQL> set linesize 140 pagesize 1400 SQL> show parameter lm_dd NAME TYPE VALUE ------------------------------------ -------------------------------- ------------------------------ _lm_dd_interval integer 20 SQL> select count(*) from gv$instance; COUNT(*) ---------- 2 instance 1: SQL> oradebug setorapid 12 Oracle pid: 12, Unix process pid: 8608, image: [email protected] (LMD0) ? LMD0??? UTS TRACE??RAC???????????? SQL> oradebug event 10046 trace name context forever,level 8:10708 trace name context forever,level 103: trace[rac.*] disk high; Statement processed. Elapsed: 00:00:00.00 SQL> update maclean1 set t1=t1+1; 1 row updated. instance 2: SQL> update maclean2 set t1=t1+1; 1 row updated. SQL> update maclean1 set t1=t1+1; Instance 1: SQL> update maclean2 set t1=t1+1; update maclean2 set t1=t1+1 * ERROR at line 1: ORA-00060: deadlock detected while waiting for resource Elapsed: 00:00:20.51 LMD0???UTS TRACE 2012-06-12 22:27:00.929284 : [kjmpbmsg:process][type 22][msg 0x7fa620ac85a8][from 1][seq 8148.0][len 192] 2012-06-12 22:27:00.929346 : [kjmxmpm][type 22][seq 0.0][msg 0x7fa620ac85a8][from 1] *** 2012-06-12 22:27:00.929 * kjddind: received DDIND msg with subtype x6 * reqp->dd_master_inst_kjxmddi == 1 * kjddind: dump sgh: 2012-06-12 22:27:00.929346*: kjddind: req->timestamp [0.15], kjddt [0.13] 2012-06-12 22:27:00.929346*: >> DDmsg:KJX_DD_REMOTE,TS[0.15],Inst 1->2,ddxid[id1,id2,inst:2097153,31,1],ddlock[0x95023930,829],ddMasterInst 1 2012-06-12 22:27:00.929346*: lock [0x95023930,829], op = [mast] 2012-06-12 22:27:00.929346*: reqp->timestamp [0.15], kjddt [0.13] 2012-06-12 22:27:00.929346*: kjddind: updated local timestamp [0.15] * kjddind: case KJX_DD_REMOTE 2012-06-12 22:27:00.929346*: ADD IO NODE WFG: 0 frame pointer 2012-06-12 22:27:00.929346*: PUSH: type=res, enqueue(0xffffffff.0xffffffff)=0xbbb9af40, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: PROCESS: type=res, enqueue(0xffffffff.0xffffffff)=0xbbb9af40, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: POP: type=res, enqueue(0xffffffff.0xffffffff)=0xbbb9af40, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: kjddopr[TX 0xe000c.0x32][ext 0x5,0x0]: blocking lock 0xbbb9a800, owner 2097154 of inst 2 2012-06-12 22:27:00.929346*: PUSH: type=txn, enqueue(0xffffffff.0xffffffff)=0xbbb9a800, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: PROCESS: type=txn, enqueue(0xffffffff.0xffffffff)=0xbbb9a800, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: ADD NODE TO WFG: type=txn, enqueue(0xffffffff.0xffffffff)=0xbbb9a800, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: POP: type=txn, enqueue(0xffffffff.0xffffffff)=0xbbb9a800, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: kjddopt: converting lock 0xbbce92f8 on 'TX' 0x80016.0x5d4,txid [2097154,34]of inst 2 2012-06-12 22:27:00.929346*: PUSH: type=res, enqueue(0xffffffff.0xffffffff)=0xbbce92f8, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: PROCESS: type=res, enqueue(0xffffffff.0xffffffff)=0xbbce92f8, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929346*: ADD NODE TO WFG: type=res, enqueue(0xffffffff.0xffffffff)=0xbbce92f8, block=KJUSEREX, snode=1 2012-06-12 22:27:00.929855 : GSIPC:AMBUF: rcv buff 0x7fa620aa8cd8, pool rcvbuf, rqlen 1102 2012-06-12 22:27:00.929878 : GSIPC:GPBMSG: new bmsg 0x7fa620aa8d48 mb 0x7fa620aa8cd8 msg 0x7fa620aa8d68 mlen 192 dest x100 flushsz -1 2012-06-12 22:27:00.929878*: << DDmsg:KJX_DD_REMOTE,TS[0.15],Inst 2->1,ddxid[id1,id2,inst:2097153,31,1],ddlock[0x95023930,829],ddMasterInst 1 2012-06-12 22:27:00.929878*: lock [0xbbce92f8,287], op = [mast] 2012-06-12 22:27:00.929878*: ADD IO NODE WFG: 0 frame pointer 2012-06-12 22:27:00.929923 : [kjmpbmsg:compl][msg 0x7fa620ac8588][typ p][nmsgs 1][qtime 0][ptime 0] 2012-06-12 22:27:00.929947 : GSIPC:PBAT: flush start. flag 0x79 end 0 inc 4.4 2012-06-12 22:27:00.929963 : GSIPC:PBAT: send bmsg 0x7fa620aa8d48 blen 224 dest 1.0 2012-06-12 22:27:00.929979 : GSIPC:SNDQ: enq msg 0x7fa620aa8d48, type 65521 seq 8325, inst 1, receiver 0, queued 1 012-06-12 22:27:00.929979 : GSIPC:SNDQ: enq msg 0x7fa620aa8d48, type 65521 seq 8325, inst 1, receiver 0, queued 1 2012-06-12 22:27:00.929996 : GSIPC:BSEND: flushing sndq 0xb491dd28, id 0, dcx 0xbc517770, inst 1, rcvr 0 qlen 0 1 2012-06-12 22:27:00.930014 : GSIPC:BSEND: no batch1 msg 0x7fa620aa8d48 type 65521 len 224 dest (1:0) 2012-06-12 22:27:00.930088 : kjbsentscn[0x0.3f72dc][to 1] 2012-06-12 22:27:00.930144 : GSIPC:SENDM: send msg 0x7fa620aa8d48 dest x10000 seq 8325 type 65521 tkts x1 mlen xe00110 2012-06-12 22:27:00.930531 : GSIPC:KSXPCB: msg 0x7fa620aa8d48 status 30, type 65521, dest 1, rcvr 0 WAIT #0: nam='ges remote message' ela= 1372 waittime=80 loop=0 p3=74 obj#=-1 tim=1339554420931640 2012-06-12 22:27:00.931728 : GSIPC:RCVD: ksxp msg 0x7fa620af6490 sndr 1 seq 0.8149 type 65521 tkts 1 2012-06-12 22:27:00.931746 : GSIPC:RCVD: watq msg 0x7fa620af6490 sndr 1, seq 8149, type 65521, tkts 1 2012-06-12 22:27:00.931763 : GSIPC:RCVD: seq update (0.8148)->(0.8149) tp -15 fg 0x4 from 1 pbattr 0x0 2012-06-12 22:27:00.931779 : GSIPC:TKT: collect msg 0x7fa620af6490 from 1 for rcvr 0, tickets 1 2012-06-12 22:27:00.931794 : kjbrcvdscn[0x0.3f72dc][from 1][idx 2012-06-12 22:27:00.931810 : kjbrcvdscn[no bscn dd_master_inst_kjxmddi == 1 * kjddind: dump sgh: NXTIN (nil) 0 wq 0 cvtops x0 0x0.0x0(ext 0x0,0x0)[0000-0000-00000000] inst 1 BLOCKER 0xbbb9a800 5 wq 1 cvtops x28 TX 0xe000c.0x32(ext 0x5,0x0)[20000-0002-00000022] inst 2 BLOCKED 0xbbce92f8 5 wq 2 cvtops x1 TX 0x80016.0x5d4(ext 0x2,0x0)[20000-0002-00000022] inst 2 NXTOUT (nil) 0 wq 0 cvtops x0 0x0.0x0(ext 0x0,0x0)[0000-0000-00000000] inst 1 2012-06-12 22:27:00.932058*: kjddind: req->timestamp [0.15], kjddt [0.15] 2012-06-12 22:27:00.932058*: >> DDmsg:KJX_DD_VALIDATE,TS[0.15],Inst 1->2,ddxid[id1,id2,inst:2097153,31,1],ddlock[0x95023930,829],ddMasterInst 1 2012-06-12 22:27:00.932058*: lock [(nil),0], op = [vald_dd] 2012-06-12 22:27:00.932058*: kjddind: updated local timestamp [0.15] * kjddind: case KJX_DD_VALIDATE *** 2012-06-12 22:27:00.932 * kjddvald called: kjxmddi stuff: * cont_lockp (nil) * dd_lockp 0x95023930 * dd_inst 1 * dd_master_inst 1 * sgh graph: NXTIN (nil) 0 wq 0 cvtops x0 0x0.0x0(ext 0x0,0x0)[0000-0000-00000000] inst 1 BLOCKER 0xbbb9a800 5 wq 1 cvtops x28 TX 0xe000c.0x32(ext 0x5,0x0)[20000-0002-00000022] inst 2 BLOCKED 0xbbce92f8 5 wq 2 cvtops x1 TX 0x80016.0x5d4(ext 0x2,0x0)[20000-0002-00000022] inst 2 NXTOUT (nil) 0 wq 0 cvtops x0 0x0.0x0(ext 0x0,0x0)[0000-0000-00000000] inst 1 POP WFG NODE: lock=(nil) * kjddvald: dump the PRQ: BLOCKER 0xbbb9a800 5 wq 1 cvtops x28 TX 0xe000c.0x32(ext 0x5,0x0)[20000-0002-00000022] inst 2 BLOCKED 0xbbce92f8 5 wq 2 cvtops x1 TX 0x80016.0x5d4(ext 0x2,0x0)[20000-0002-00000022] inst 2 * kjddvald: KJDD_NXTONOD ->node_kjddsg.dinst_kjddnd =1 * kjddvald: ... which is not my node, my subgraph is validated but the cycle is not complete Global blockers dump start:--------------------------------- DUMP LOCAL BLOCKER/HOLDER: block level 5 res [0x80016][0x5d4],[TX][ext 0x2,0x0] ??dead lock!!! ???????11.2.0.3???? RAC LMD???????????”_lm_dd_interval”????????????20s?  ???????10g?_lm_dd_interval???60s,??????Processes?????????????????,????????????Server Process????????60s??????11g?????(??????LMD???????)???????,???????????10s??? Enqueue Deadlock Detection? ?11g??? RAC?LMD???????hidden parameter ????”_lm_dd_interval”???,RAC????????????????,???????????: SQL> col name for a50 SQL> col describ for a60 SQL> col value for a20 SQL> set linesize 140 pagesize 1400 SQL> SELECT x.ksppinm NAME, y.ksppstvl VALUE, x.ksppdesc describ 2 FROM SYS.x$ksppi x, SYS.x$ksppcv y 3 WHERE x.inst_id = USERENV ('Instance') 4 AND y.inst_id = USERENV ('Instance') 5 AND x.indx = y.indx 6 AND x.ksppinm like '_lm_dd%'; NAME VALUE DESCRIB -------------------------------------------------- -------------------- ------------------------------------------------------------ _lm_dd_interval 20 dd time interval in seconds _lm_dd_scan_interval 5 dd scan interval in seconds _lm_dd_search_cnt 3 number of dd search per token get _lm_dd_max_search_time 180 max dd search time per token _lm_dd_maxdump 50 max number of locks to be dumped during dd validation _lm_dd_ignore_nodd FALSE if TRUE nodeadlockwait/nodeadlockblock options are ignored 6 rows selected.

  Read the article

• C# Confusing Results from Performance Test

  - by aip.cd.aish

  I am currently working on an image processing application. The application captures images from a webcam and then does some processing on it. The app needs to be real time responsive (ideally < 50ms to process each request). I have been doing some timing tests on the code I have and I found something very interesting (see below). clearLog(); log("Log cleared"); camera.QueryFrame(); camera.QueryFrame(); log("Camera buffer cleared"); Sensor s = t.val; log("Sx: " + S.X + " Sy: " + S.Y); Image<Bgr, Byte> cameraImage = camera.QueryFrame(); log("Camera output acuired for processing"); Each time the log is called the time since the beginning of the processing is displayed. Here is my log output: [3 ms]Log cleared [41 ms]Camera buffer cleared [41 ms]Sx: 589 Sy: 414 [112 ms]Camera output acuired for processing The timings are computed using a StopWatch from System.Diagonostics. QUESTION 1 I find this slightly interesting, since when the same method is called twice it executes in ~40ms and when it is called once the next time it took longer (~70ms). Assigning the value can't really be taking that long right? QUESTION 2 Also the timing for each step recorded above varies from time to time. The values for some steps are sometimes as low as 0ms and sometimes as high as 100ms. Though most of the numbers seem to be relatively consistent. I guess this may be because the CPU was used by some other process in the mean time? (If this is for some other reason, please let me know) Is there some way to ensure that when this function runs, it gets the highest priority? So that the speed test results will be consistently low (in terms of time). EDIT I change the code to remove the two blank query frames from above, so the code is now: clearLog(); log("Log cleared"); Sensor s = t.val; log("Sx: " + S.X + " Sy: " + S.Y); Image<Bgr, Byte> cameraImage = camera.QueryFrame(); log("Camera output acuired for processing"); The timing results are now: [2 ms]Log cleared [3 ms]Sx: 589 Sy: 414 [5 ms]Camera output acuired for processing The next steps now take longer (sometimes, the next step jumps to after 20-30ms, while the next step was previously almost instantaneous). I am guessing this is due to the CPU scheduling. Is there someway I can ensure the CPU does not get scheduled to do something else while it is running through this code?

  Read the article

• How do I create a partial function with generics in scala?

  - by Matteo Caprari

  Hello. I'm trying to write a performance measurements library for Scala. My idea is to transparently 'mark' sections so that the execution time can be collected. Unfortunately I wasn't able to bend the compiler to my will. An admittedly contrived example of what I have in mind: // generate a timing function val myTimer = mkTimer('myTimer) // see how the timing function returns the right type depending on the // type of the function it is passed to it val act = actor { loop { receive { case 'Int => val calc = myTimer { (1 to 100000).sum } val result = calc + 10 // calc must be Int self reply (result) case 'String => val calc = myTimer { (1 to 100000).mkString } val result = calc + " String" // calc must be String self reply (result) } Now, this is the farthest I got: trait Timing { def time[T <: Any](name: Symbol)(op: => T) :T = { val start = System.nanoTime val result = op val elapsed = System.nanoTime - start println(name + ": " + elapsed) result } def mkTimer[T <: Any](name: Symbol) : (() => T) => () => T = { type c = () => T time(name)(_ : c) } } Using the time function directly works and the compiler correctly uses the return type of the anonymous function to type the 'time' function: val bigString = time('timerBigString) { (1 to 100000).mkString("-") } println (bigString) Great as it seems, this pattern has a number of shortcomings: forces the user to reuse the same symbol at each invocation makes it more difficult to do more advanced stuff like predefined project-level timers does not allow the library to initialize once a data structure for 'timerBigString So here it comes mkTimer, that would allow me to partially apply the time function and reuse it. I use mkTimer like this: val myTimer = mkTimer('aTimer) val myString= myTimer { (1 to 100000).mkString("-") } println (myString) But I get a compiler error: error: type mismatch; found : String required: () => Nothing (1 to 100000).mkString("-") I get the same error if I inline the currying: val timerBigString = time('timerBigString) _ val bigString = timerBigString { (1 to 100000).mkString("-") } println (bigString) This works if I do val timerBigString = time('timerBigString) (_: String), but this is not what I want. I'd like to defer typing of the partially applied function until application. I conclude that the compiler is deciding the return type of the partial function when I first create it, chosing "Nothing" because it can't make a better informed choice. So I guess what I'm looking for is a sort of late-binding of the partially applied function. Is there any way to do this? Or maybe is there a completely different path I could follow? Well, thanks for reading this far -teo

  Read the article

• Redundancy algorithm for reading noisy bitstream

  - by Tedd Hansen

  I'm reading a lossy bit stream and I need a way to recover as much usable data as possible. There can be 1's in place of 0's and 0's in palce of 1's, but accuracy is probably over 80%. A bonus would be if the algorithm could compensate for missing/too many bits as well. The source I'm reading from is analogue with noise (microphone via FFT), and the read timing could vary depending on computer speed. I remember reading about algorithms used in CD-ROM's doing this in 3? layers, so I'm guessing using several layers is a good option. I don't remember the details though, so if anyone can share some ideas that would be great! :) Edit: Added sample data Best case data: in: 0000010101000010110100101101100111000000100100101101100111000000100100001100000010000101110101001101100111000101110000001001111011001100110000001001100111011110110101011100111011000100110000001000010111 out: 0010101000010110100101101100111000000100100101101100111000000100100001100000010000101110101001101100111000101110000001001111011001100110000001001100111011110110101011100111011000100110000001000010111011 Bade case (timing is off, samples are missing): out: 00101010000101101001011011001110000001001001011011001110000001001000011000000100001011101010011011001 in: 00111101001011111110010010111111011110000010010000111000011101001101111110000110111011110111111111101 Edit2: I am able to controll the data being sent. Currently attempting to implement simple XOR checking (though it won't be enough).

  Read the article

• expand a varchar column very slowly , why?

  - by francs

  Hi We need to modify a column of a big product table , usually normall ddl statments will be excutely fast ,but the above ddl statmens takes about 10 minnutes?I wonder know the reason! I just want to expand a varchar column?The following is the detailsl --table size wapreader_log= select pg_size_pretty(pg_relation_size('log_foot_mark')); pg_size_pretty ---------------- 5441 MB (1 row) --table ddl wapreader_log= \d log_foot_mark Table "wapreader_log.log_foot_mark" Column | Type | Modifiers -------------+-----------------------------+----------- id | integer | not null create_time | timestamp without time zone | sky_id | integer | url | character varying(1000) | refer_url | character varying(1000) | source | character varying(64) | users | character varying(64) | userm | character varying(64) | usert | character varying(64) | ip | character varying(32) | module | character varying(64) | resource_id | character varying(100) | user_agent | character varying(128) | Indexes: "pk_log_footmark" PRIMARY KEY, btree (id) --alter column wapreader_log= \timing Timing is on. wapreader_log= ALTER TABLE wapreader_log.log_foot_mark ALTER column user_agent TYPE character varying(256); ALTER TABLE Time: 603504.835 ms

  Read the article

• slow record deletion with large ntext values

  - by asking

  I'm having trouble deleting some records via a stored procedure from a table in SQLServer 2008R2 that has ntext columns. The stored proc is timing out and running the query directly takes a very long time. The initial query was a straight "delete from y where x = z" and I've also tried running it in batches of 1000 with transactions but it is still slow and timing out in a stored proc. The majority of the records in the table will not be deleted each time (it's not just a once-off query but will be run other times). The ntext columns are not used in the where clause and I can't change the column types. Any suggestions on the quickest way to delete records with large ntext values? Thanks

  Read the article

• Troubleshooting occasional timeout of select() in windows

  - by JonF

  I'm having an occasional problem with select() timing out on me. I have it set for twenty seconds. The system will handle 100's of transactions correctly, but occasionally one fails with the selet timing out. It does about 1 transaction every few seconds, opening and closing the tcp conncetion with each transaction. I thought the server my app was connecting to might have to many connection attempts pending, but no 4226 events are showing up in the logs One more point thing I noticed when using wireshark that I'm getting a SYN,RST in response to the SYN I am appearently sending. This only happens a few times over the first second or two, then I don't see any more activity in Wireshark

  Read the article

• An increase to 3 Gig of RAM slows down Ubuntu 10.04 LTS

  - by williepabon

  I have Ubuntu 10.04 running from an external hard drive (installed on an enclosure) connected via USB port. Like a month or so ago, I increased RAM on my pc from 2 Gigs to 3 Gigs. This resulted on extremely long boot times and slow application loads. While I was understanding the nature of my problem, I posted various threads on this forum ( Questions # 188417, 188801), where I was advised to gather speed tests, and other info on my machine. I was also suggested that I might have problems with the RAM installed. Initially, I did not consider that possibility because: 1) I did a memory test with a diagnostic program from DELL (My pc is from Dell) 2) My pc works fine with Windows XP (the default OS), no problems with memory 3) My pc works fine when booting with Ubuntu 10.10 memory stick, no speed problems 4) My pc works fine when booting with Ubuntu 11.10 memory stick, no speed problems Anyway, I performed the memory tests suggested. But before doing it, and to check out any possibility of hardware issues on the hard drive, I did the following: (1) purchased a new hard drive enclosure and moved my hard drive to it, (2) purchased a new USB cable and used it to connect my hard drive/enclosure setup to a different USB port on my pc. Then, I performed speed tests with 1 Gig, 2 Gigs and 3 Gigs of RAM with my Ubuntu 10.04 OS. Ubuntu 10.04 worked well when booted with 1 Gig or 2 Gigs of RAM. When I increased to 3 Gigs, it slowed down to a crawl. I can't understand the relationship between an increase of 1 Gig and the effect it has in Ubuntu 10.04. This doesn't happen with Ubuntu 10.10 and 11.10. Unfortunately for me, Ubuntu 10.04 is my principal work operating system. So, I need a solution for this. Hardware and system information: DELL Precision 670 2 internal SATA Hard drives Audigy 2 ZS audio system Factory OS: Windows XP Professional SP3 NVidia 8400 GTS video card More info: williepabon@WP-WrkStation:~$ uname -a Linux WP-WrkStation 2.6.32-38-generic #83-Ubuntu SMP Wed Jan 4 11:13:04 UTC 2012 i686 GNU/Linux williepabon@WP-WrkStation:~$ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 10.04.4 LTS Release: 10.04 Codename: lucid Speed test with the 3 Gigs of RAM installed: williepabon@WP-WrkStation:~$ sudo hdparm -tT /dev/sdc [sudo] password for williepabon: /dev/sdc: Timing cached reads: 84 MB in 2.00 seconds = 41.96 MB/sec Timing buffered disk reads: 4 MB in 3.81 seconds = 1.05 MB/sec This is a very slow transfer rate from a hard drive. I will really appreciate a solution or a work around for this problem. I know that that there are users that have Ubuntu 10.04 with 3 Gigs or more of RAM and they don't have this problem. Same question asked on Launchpad for reference.

  Read the article

• Ubuntu 14.04 Failed to load module udlfb

  - by jar276705

  DisplayLink doesn't load and run. The adapter is recognized and /dev/FB1 is created. USB bus info: Bus 001 Device 006: ID 17e9:0198 DisplayLink Xorg.0.log: X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 44708.386] X Protocol Version 11, Revision 0 [ 44708.389] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu [ 44708.392] Current Operating System: Linux rrl 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 i686 [ 44708.392] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=6b719a77-29e0-4668-8f16-57d0d3a73a3f ro quiet splash vt.handoff=7 [ 44708.399] Build Date: 16 April 2014 01:40:08PM [ 44708.402] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 44708.405] Current version of pixman: 0.30.2 [ 44708.412] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 44708.412] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 44708.427] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 1 09:38:27 2014 [ 44708.431] (==) Using config file: "/etc/X11/xorg.conf" [ 44708.434] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 44708.435] (==) ServerLayout "X.org Configured" [ 44708.435] (**) |-->Screen "DisplayLinkScreen" (0) [ 44708.435] (**) | |-->Monitor "DisplayLinkMonitor" [ 44708.435] (**) | |-->Device "DisplayLinkDevice" [ 44708.435] (**) |-->Screen "Screen0" (1) [ 44708.435] (**) | |-->Monitor "Monitor0" [ 44708.435] (**) | |-->Device "Card0" [ 44708.435] (**) |-->Input Device "Mouse0" [ 44708.435] (**) |-->Input Device "Keyboard0" [ 44708.435] (==) Automatically adding devices [ 44708.435] (==) Automatically enabling devices [ 44708.435] (==) Automatically adding GPU devices [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 44708.435] (**) ModulePath set to "/usr/lib/xorg/modules" [ 44708.435] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 44708.435] (WW) Disabling Mouse0 [ 44708.435] (WW) Disabling Keyboard0 [ 44708.435] (II) Loader magic: 0xb77106c0 [ 44708.435] (II) Module ABI versions: [ 44708.435] X.Org ANSI C Emulation: 0.4 [ 44708.435] X.Org Video Driver: 15.0 [ 44708.435] X.Org XInput driver : 20.0 [ 44708.435] X.Org Server Extension : 8.0 [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card0) [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card1) [ 44708.437] (--) PCI:*(0:1:5:0) 1002:9616:105b:0e26 rev 0, Mem @ 0xf0000000/134217728, 0xfeae0000/65536, 0xfe900000/1048576, I/O @ 0x0000b000/256 [ 44708.441] Initializing built-in extension Generic Event Extension [ 44708.444] Initializing built-in extension SHAPE [ 44708.448] Initializing built-in extension MIT-SHM [ 44708.452] Initializing built-in extension XInputExtension [ 44708.456] Initializing built-in extension XTEST [ 44708.460] Initializing built-in extension BIG-REQUESTS [ 44708.464] Initializing built-in extension SYNC [ 44708.468] Initializing built-in extension XKEYBOARD [ 44708.471] Initializing built-in extension XC-MISC [ 44708.475] Initializing built-in extension SECURITY [ 44708.479] Initializing built-in extension XINERAMA [ 44708.483] Initializing built-in extension XFIXES [ 44708.487] Initializing built-in extension RENDER [ 44708.491] Initializing built-in extension RANDR [ 44708.494] Initializing built-in extension COMPOSITE [ 44708.498] Initializing built-in extension DAMAGE [ 44708.502] Initializing built-in extension MIT-SCREEN-SAVER [ 44708.506] Initializing built-in extension DOUBLE-BUFFER [ 44708.510] Initializing built-in extension RECORD [ 44708.513] Initializing built-in extension DPMS [ 44708.517] Initializing built-in extension Present [ 44708.521] Initializing built-in extension DRI3 [ 44708.525] Initializing built-in extension X-Resource [ 44708.528] Initializing built-in extension XVideo [ 44708.532] Initializing built-in extension XVideo-MotionCompensation [ 44708.535] Initializing built-in extension SELinux [ 44708.539] Initializing built-in extension XFree86-VidModeExtension [ 44708.542] Initializing built-in extension XFree86-DGA [ 44708.546] Initializing built-in extension XFree86-DRI [ 44708.549] Initializing built-in extension DRI2 [ 44708.549] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 44708.549] (WW) "xmir" is not to be loaded by default. Skipping. [ 44708.549] (II) LoadModule: "glx" [ 44708.549] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 44708.550] (II) Module glx: vendor="X.Org Foundation" [ 44708.550] compiled for 1.15.1, module version = 1.0.0 [ 44708.550] ABI class: X.Org Server Extension, version 8.0 [ 44708.550] (==) AIGLX enabled [ 44708.553] Loading extension GLX [ 44708.553] (II) LoadModule: "udlfb" [ 44708.554] (WW) Warning, couldn't open module udlfb [ 44708.554] (II) UnloadModule: "udlfb" [ 44708.554] (II) Unloading udlfb [ 44708.554] (EE) Failed to load module "udlfb" (module does not exist, 0) [ 44708.554] (II) LoadModule: "modesetting" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.554] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 0.8.1 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (==) Matched fglrx as autoconfigured driver 0 [ 44708.554] (==) Matched ati as autoconfigured driver 1 [ 44708.554] (==) Matched fglrx as autoconfigured driver 2 [ 44708.554] (==) Matched ati as autoconfigured driver 3 [ 44708.554] (==) Matched modesetting as autoconfigured driver 4 [ 44708.554] (==) Matched fbdev as autoconfigured driver 5 [ 44708.554] (==) Matched vesa as autoconfigured driver 6 [ 44708.554] (==) Assigned the driver to the xf86ConfigLayout [ 44708.554] (II) LoadModule: "fglrx" [ 44708.554] (WW) Warning, couldn't open module fglrx [ 44708.554] (II) UnloadModule: "fglrx" [ 44708.554] (II) Unloading fglrx [ 44708.554] (EE) Failed to load module "fglrx" (module does not exist, 0) [ 44708.554] (II) LoadModule: "ati" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 44708.554] (II) Module ati: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 7.3.0 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (II) LoadModule: "radeon" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 44708.555] (II) Module radeon: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 7.3.0 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "modesetting" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.555] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.8.1 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) UnloadModule: "modesetting" [ 44708.555] (II) Unloading modesetting [ 44708.555] (II) Failed to load module "modesetting" (already loaded, 0) [ 44708.555] (II) LoadModule: "fbdev" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 44708.555] (II) Module fbdev: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.4.4 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "vesa" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 44708.555] (II) Module vesa: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 2.3.3 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 44708.555] (II) RADEON: Driver for ATI Radeon chipsets: [ 44708.560] (II) FBDEV: driver for framebuffer: fbdev [ 44708.560] (II) VESA: driver for VESA chipsets: vesa [ 44708.560] (--) using VT number 7 [ 44708.578] (II) modesetting(0): using drv /dev/dri/card0 [ 44708.578] (II) modesetting(G0): using drv /dev/dri/card1 [ 44708.578] (WW) Falling back to old probe method for fbdev [ 44708.578] (II) Loading sub module "fbdevhw" [ 44708.578] (II) LoadModule: "fbdevhw" [ 44708.578] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 44708.578] (II) Module fbdevhw: vendor="X.Org Foundation" [ 44708.578] compiled for 1.15.1, module version = 0.0.2 [ 44708.578] ABI class: X.Org Video Driver, version 15.0 [ 44708.578] (WW) Falling back to old probe method for vesa [ 44708.578] (**) modesetting(0): Depth 16, (--) framebuffer bpp 16 [ 44708.578] (==) modesetting(0): RGB weight 565 [ 44708.578] (==) modesetting(0): Default visual is TrueColor [ 44708.578] (II) modesetting(0): ShadowFB: preferred YES, enabled YES [ 44708.608] (II) modesetting(0): Output VGA-0 using monitor section DisplayLinkMonitor [ 44708.610] (II) modesetting(0): Output DVI-0 has no monitor section [ 44708.640] (II) modesetting(0): EDID for output VGA-0 [ 44708.640] (II) modesetting(0): Manufacturer: ACR Model: 74 Serial#: 2483090993 [ 44708.640] (II) modesetting(0): Year: 2009 Week: 40 [ 44708.640] (II) modesetting(0): EDID Version: 1.3 [ 44708.640] (II) modesetting(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.640] (II) modesetting(0): Sync: Separate [ 44708.640] (II) modesetting(0): Max Image Size [cm]: horiz.: 53 vert.: 29 [ 44708.640] (II) modesetting(0): Gamma: 2.20 [ 44708.640] (II) modesetting(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.641] (II) modesetting(0): First detailed timing is preferred mode [ 44708.641] (II) modesetting(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609 [ 44708.641] (II) modesetting(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 [ 44708.641] (II) modesetting(0): Supported established timings: [ 44708.641] (II) modesetting(0): 720x400@70Hz [ 44708.641] (II) modesetting(0): 640x480@60Hz [ 44708.641] (II) modesetting(0): 640x480@72Hz [ 44708.641] (II) modesetting(0): 640x480@75Hz [ 44708.641] (II) modesetting(0): 800x600@56Hz [ 44708.641] (II) modesetting(0): 800x600@60Hz [ 44708.641] (II) modesetting(0): 800x600@72Hz [ 44708.641] (II) modesetting(0): 800x600@75Hz [ 44708.641] (II) modesetting(0): 1024x768@60Hz [ 44708.641] (II) modesetting(0): 1024x768@70Hz [ 44708.641] (II) modesetting(0): 1024x768@75Hz [ 44708.641] (II) modesetting(0): 1280x1024@75Hz [ 44708.641] (II) modesetting(0): Manufacturer's mask: 0 [ 44708.641] (II) modesetting(0): Supported standard timings: [ 44708.641] (II) modesetting(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.641] (II) modesetting(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.641] (II) modesetting(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 44708.641] (II) modesetting(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989 [ 44708.641] (II) modesetting(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 44708.641] (II) modesetting(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 44708.641] (II) modesetting(0): Supported detailed timing: [ 44708.641] (II) modesetting(0): clock: 138.5 MHz Image Size: 531 x 298 mm [ 44708.641] (II) modesetting(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 44708.641] (II) modesetting(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 44708.641] (II) modesetting(0): Monitor name: H243H [ 44708.641] (II) modesetting(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz [ 44708.641] (II) modesetting(0): Serial No: LEW0C0044002 [ 44708.641] (II) modesetting(0): EDID (in hex): [ 44708.641] (II) modesetting(0): 00ffffffffffff000472740031f60094 [ 44708.641] (II) modesetting(0): 2813010368351d78ea6085a6564a9c25 [ 44708.641] (II) modesetting(0): 125054afcf008180714f9500950fa940 [ 44708.641] (II) modesetting(0): b300010101011a3680a070381f403020 [ 44708.641] (II) modesetting(0): 3500132a2100001a000000fc00483234 [ 44708.642] (II) modesetting(0): 33480a20202020202020000000fd0038 [ 44708.642] (II) modesetting(0): 4c1f5312000a202020202020000000ff [ 44708.642] (II) modesetting(0): 004c45573043303034343030320a003c [ 44708.642] (II) modesetting(0): Printing probed modes for output VGA-0 [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz UeP) [ 44708.642] (II) modesetting(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP) [ 44708.642] (II) modesetting(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.645] (II) modesetting(0): EDID for output DVI-0 [ 44708.645] (II) modesetting(0): Output VGA-0 connected [ 44708.645] (II) modesetting(0): Output DVI-0 disconnected [ 44708.645] (II) modesetting(0): Using user preference for initial modes [ 44708.645] (II) modesetting(0): Output VGA-0 using initial mode 1280x1024 [ 44708.645] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.645] (==) modesetting(0): DPI set to (96, 96) [ 44708.645] (II) Loading sub module "fb" [ 44708.645] (II) LoadModule: "fb" [ 44708.645] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.645] (II) Module fb: vendor="X.Org Foundation" [ 44708.645] compiled for 1.15.1, module version = 1.0.0 [ 44708.645] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.645] (II) Loading sub module "shadow" [ 44708.645] (II) LoadModule: "shadow" [ 44708.646] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 44708.646] (II) Module shadow: vendor="X.Org Foundation" [ 44708.646] compiled for 1.15.1, module version = 1.1.0 [ 44708.646] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.646] (**) modesetting(G0): Depth 16, (--) framebuffer bpp 16 [ 44708.646] (==) modesetting(G0): RGB weight 565 [ 44708.646] (==) modesetting(G0): Default visual is TrueColor [ 44708.646] (II) modesetting(G0): ShadowFB: preferred NO, enabled NO [ 44708.727] (II) modesetting(G0): Output DVI-1-0 using monitor section DisplayLinkMonitor [ 44708.808] (II) modesetting(G0): EDID for output DVI-1-0 [ 44708.808] (II) modesetting(G0): Manufacturer: WDE Model: 1702 Serial#: 0 [ 44708.808] (II) modesetting(G0): Year: 2005 Week: 14 [ 44708.808] (II) modesetting(G0): EDID Version: 1.3 [ 44708.808] (II) modesetting(G0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.808] (II) modesetting(G0): Sync: Separate [ 44708.808] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 44708.808] (II) modesetting(G0): Gamma: 2.20 [ 44708.808] (II) modesetting(G0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.808] (II) modesetting(G0): Default color space is primary color space [ 44708.808] (II) modesetting(G0): First detailed timing is preferred mode [ 44708.808] (II) modesetting(G0): GTF timings supported [ 44708.808] (II) modesetting(G0): redX: 0.643 redY: 0.352 greenX: 0.283 greenY: 0.608 [ 44708.808] (II) modesetting(G0): blueX: 0.147 blueY: 0.102 whiteX: 0.313 whiteY: 0.329 [ 44708.808] (II) modesetting(G0): Supported established timings: [ 44708.808] (II) modesetting(G0): 720x400@70Hz [ 44708.808] (II) modesetting(G0): 640x480@60Hz [ 44708.808] (II) modesetting(G0): 640x480@67Hz [ 44708.808] (II) modesetting(G0): 640x480@72Hz [ 44708.808] (II) modesetting(G0): 640x480@75Hz [ 44708.808] (II) modesetting(G0): 800x600@56Hz [ 44708.808] (II) modesetting(G0): 800x600@60Hz [ 44708.808] (II) modesetting(G0): 800x600@72Hz [ 44708.808] (II) modesetting(G0): 800x600@75Hz [ 44708.808] (II) modesetting(G0): 832x624@75Hz [ 44708.808] (II) modesetting(G0): 1024x768@60Hz [ 44708.808] (II) modesetting(G0): 1024x768@70Hz [ 44708.808] (II) modesetting(G0): 1024x768@75Hz [ 44708.809] (II) modesetting(G0): 1280x1024@75Hz [ 44708.809] (II) modesetting(G0): Manufacturer's mask: 0 [ 44708.809] (II) modesetting(G0): Supported standard timings: [ 44708.809] (II) modesetting(G0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.809] (II) modesetting(G0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.809] (II) modesetting(G0): Supported detailed timing: [ 44708.809] (II) modesetting(G0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 44708.809] (II) modesetting(G0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 44708.809] (II) modesetting(G0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 44708.809] (II) modesetting(G0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz [ 44708.809] (II) modesetting(G0): Monitor name: WDE LCM-17v2 [ 44708.809] (II) modesetting(G0): Serial No: 0 [ 44708.809] (II) modesetting(G0): EDID (in hex): [ 44708.809] (II) modesetting(G0): 00ffffffffffff005c85021700000000 [ 44708.809] (II) modesetting(G0): 0e0f010368221b78ef8bc5a45a489b25 [ 44708.809] (II) modesetting(G0): 1a5054bfef008180714f010101010101 [ 44708.809] (II) modesetting(G0): 010101010101302a009851002a403070 [ 44708.809] (II) modesetting(G0): 1300520e1100001e000000fd00324b1e [ 44708.809] (II) modesetting(G0): 520e000a202020202020000000fc0057 [ 44708.809] (II) modesetting(G0): 4445204c434d2d313776320a000000ff [ 44708.809] (II) modesetting(G0): 00300a202020202020202020202000e7 [ 44708.809] (II) modesetting(G0): Printing probed modes for output DVI-1-0 [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz UeP) [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz) [ 44708.810] (II) modesetting(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.810] (==) modesetting(G0): DPI set to (96, 96) [ 44708.810] (II) Loading sub module "fb" [ 44708.810] (II) LoadModule: "fb" [ 44708.810] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.810] (II) Module fb: vendor="X.Org Foundation" [ 44708.810] compiled for 1.15.1, module version = 1.0.0 [ 44708.811] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.811] (II) UnloadModule: "radeon" [ 44708.811] (II) Unloading radeon [ 44708.811] (II) UnloadModule: "fbdev" [ 44708.811] (II) Unloading fbdev [ 44708.811] (II) UnloadSubModule: "fbdevhw" [ 44708.811] (II) Unloading fbdevhw [ 44708.811] (II) UnloadModule: "vesa" [ 44708.811] (II) Unloading vesa [ 44708.811] (==) modesetting(G0): Backing store enabled [ 44708.811] (==) modesetting(G0): Silken mouse enabled [ 44708.812] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(G0): DPMS enabled [ 44708.812] (WW) modesetting(G0): Option "fbdev" is not used [ 44708.812] (==) modesetting(0): Backing store enabled [ 44708.812] (==) modesetting(0): Silken mouse enabled [ 44708.812] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(0): DPMS enabled [ 44708.812] (WW) modesetting(0): Option "fbdev" is not used [ 44708.856] (--) RandR disabled [ 44708.867] (II) SELinux: Disabled on system [ 44708.868] (II) AIGLX: Screen 0 is not DRI2 capable [ 44708.868] (EE) AIGLX: reverting to software rendering [ 44708.878] (II) AIGLX: Loaded and initialized swrast [ 44708.878] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 44708.879] (II) modesetting(G0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Setting screen physical size to 338 x 270 [ 44708.900] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 44708.918] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 44708.918] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.918] (II) LoadModule: "evdev" [ 44708.918] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 44708.918] (II) Module evdev: vendor="X.Org Foundation" [ 44708.918] compiled for 1.15.0, module version = 2.8.2 [ 44708.918] Module class: X.Org XInput Driver [ 44708.918] ABI class: X.Org XInput driver, version 20.0 [ 44708.918] (II) Using input driver 'evdev' for 'Power Button' [ 44708.918] (**) Power Button: always reports core events [ 44708.918] (**) evdev: Power Button: Device: "/dev/input/event1" [ 44708.918] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.918] (--) evdev: Power Button: Found keys [ 44708.918] (II) evdev: Power Button: Configuring as keyboard [ 44708.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 44708.918] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 44708.918] (**) Option "xkb_rules" "evdev" [ 44708.918] (**) Option "xkb_model" "pc105" [ 44708.918] (**) Option "xkb_layout" "us" [ 44708.919] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 44708.919] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.919] (II) Using input driver 'evdev' for 'Power Button' [ 44708.919] (**) Power Button: always reports core events [ 44708.919] (**) evdev: Power Button: Device: "/dev/input/event0" [ 44708.919] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.919] (--) evdev: Power Button: Found keys [ 44708.919] (II) evdev: Power Button: Configuring as keyboard [ 44708.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" Is there anything I can do to fix this problem.

  Read the article

• fmod getWaveData() export to WAVE file help (C++)

  - by eddietree

  I am trying to export the current sound that is being played by the FMOD::System into a WAVE file by calling getWaveData(). I have the header of the wave file correct, and currently trying to write to the wave file each frame like so: const unsigned int samplesPerSec = 48000; const unsigned int fps = 60; const int numSamples = samplesPerSec / fps; float data[2][numSamples]; short conversion[numSamples*2]; m_fmodsys->getWaveData( &data[0][0], numSamples, 0 ); // left channel m_fmodsys->getWaveData( &data[1][0], numSamples, 1 ); // right channel int littleEndian = IsLittleEndian(); for ( int i = 0; i < numSamples; ++i ) { // left channel float coeff_left = data[0][i]; short val_left = (short)(coeff_left * 0x7FFF); // right channel float coeff_right = data[1][i]; short val_right = (short)(coeff_right * 0x7FFF); // handle endianness if ( !littleEndian ) { val_left = ((val_left & 0xff) << 8) | (val_left >> 8); val_right = ((val_right & 0xff) << 8) | (val_right >> 8); } conversion[i*2+0] = val_left; conversion[i*2+1] = val_right; } fwrite((void*)&conversion[0], sizeof(conversion[0]), numSamples*2, m_fh); m_dataLength += sizeof(conversion); Currently, the timing of the sound is correct, but the sample seems clipped way harshly. More specifically, I am outputting four beats in time. When I playback the wave-file, the beats timing is correct but it just sounds way fuzzy and clipped. Am I doing something wrong with my calculation? I am exporting in 16-bits, two channels. Thanks in advance! :) Reference (WAVE file format): http://www.sonicspot.com/guide/wavefiles.html

  Read the article

• Xinet tftp timeout

  - by Matt Mootz

  I trying to set up a PXE boot server. Everything is working but the TFTP client is timing out. TFTP connection timeout I am using this to setup the TFTP server. http://www.davidsudjiman.info/2006/03/27/installing-and-setting-tftpd-in-ubuntu/ /etc/xinet.d/tftp service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = /tftpboot disable = no } ps ax|grep tftp doesn't return it running. any idea's what could be wrong?

  Read the article

• How does process priority influence a process

  - by Luis Alvarado - The Wolverine

  Assuming we have read the following question: Change niceness (priority) of a running process and we know about root, non-root permissions: What actually happens when a running process (Through renice) or a new process (Through nice) gets its priority changed to a positive/negative value it previously had. Does it mean more memory is assign to it? Does more CPU power go to that particular process? Does it reduce any timing for resources for that process? What happens when the process priority change?

  Read the article

• Renewed

  - by Jeff Certain

  I just got a nice little e-mail from Microsoft. Despite the timing, it’s not an April Fools joke… I’ve been renewed as an MVP for another year. Congrats to all the other MVPs being renewed today.

  Read the article

• Car animations in Frogger on Javascript

  - by Mijoro Nicolas Rasoanaivo

  I have to finish a Frogger game in Javascript for my engineering school degree, but I don't know how to animate the cars. Right now I tried to manipulate the CSS, the DOM, I wrote a script with a setTimeout(), but none of them works.Can I have some help please? Here's my code and my CSS: <html> <head> <title>Image d&eacute;filante</title> <link rel="stylesheet" type="text/css" href="map_style.css"/> </head> <body onload="start()"> <canvas id="jeu" width="800" height="450"> </canvas> <img id="voiture" class="voiture" src="car.png" onload="startTimerCar()"> <img id="voiture2" class="voiture" src="car.png" onload="startTimerCar()"> <img id="voiture3" class="voiture" src="car.png" onload="startTimerCar()"> <img id="bigrig" class="bigrig" src="bigrig.png" onload="startTimerBigrig()"> <img id="bigrig2" class="bigrig" src="bigrig.png" onload="startTimerBigrig()"> <img id="bigrig3" class="bigrig" src="bigrig.png" onload="startTimerBigrig()"> <img id="hotrod" src="hotrod.png" onload="startTimerHotrod()"> <img id="hotrod2" src="hotrod.png" onload="startTimerHotrod()"> <img id="turtle" src="turtles_diving.png" onload="startTimerTurtle()"> <img id="turtle2" src="turtles_diving.png" onload="startTimerTurtle()"> <img id="turtle3" src="turtles_diving.png" onload="startTimerTurtle()"> <img id="small" src="log_small.png" onload="startTimerSmall()"> <img id="small2" src="log_small.png" onload="startTimerSmall()"> <img id="small3" src="log_small.png" onload="startTimerSmall()"> <img id="small4" src="log_small.png" onload="startTimerSmall()"> <img id="med" src="log_medium.png" onload="startTimerMedium()"> <img id="med2" src="log_medium.png" onload="startTimerMedium()"> <img id="med3" src="log_medium.png" onload="startTimerMedium()"> <script type="text/javascript"> var X = 1; var timer; function start(){ setInterval(init,10); document.onkeydown = move; var canvas = document.getElementById('jeu'); var context = canvas.getContext('2d'); var frog = document.getElementById('frog'); var posX_frog = 415; var posY_frog = 400; var voiture = [document.getElementById('voiture'),document.getElementById('voiture2'),document.getElementById('voiture3')]; var bigrig = [document.getElementById('bigrig'),document.getElementById('bigrig2'),document.getElementById('bigrig3')]; var hotrod = [document.getElementById('hotrod'),document.getElementById('hotrod2')]; var turtle = [document.getElementById('turtle'),document.getElementById('turtle2'),document.getElementById('turtle3')]; var small = [document.getElementById('small'),document.getElementById('small2'),document.getElementById('small3'),document.getElementById('small4')]; var med = [document.getElementById('med'),document.getElementById('med2'),document.getElementById('med3')]; function init() { context.fillStyle = "#AEEE00"; context.fillRect(0,0,800,50); context.fillRect(0,200,800,50); context.fillRect(0,400,800,50); context.fillStyle = "#046380"; context.fillRect(0,50,800,150); context.fillStyle = "#000000"; context.fillRect(0,250,800,150); var img= new Image(); img.src="./frog.png"; context.drawImage(img,posX_frog, posY_frog, 46, 38); } function move(event){ if (event.keyCode == 39){ if( posX_frog < 716 ){ posX_frog += 50; } } if(event.keyCode == 37){ if( posX_frog >25 ){ posX_frog -= 50; } } if (event.keyCode == 38){ if( posY_frog > 10 ){ posY_frog -= 50; } } if(event.keyCode == 40){ if( posY_frog <400 ){ posY_frog += 50; } } } } </script> </body> And my map_css: #jeu{ z-index:10; width: 800px; height: 450px; border: 2px black solid; overflow: hidden; position: relative; transition:width 2s; -moz-transition:width 2s; /* Firefox 4 */ -webkit-transition:width 2s; /* Safari and Chrome */ } #voiture{ z-index: 100; position: absolute; top: 315px; left: 48px; transition-timing-function: linear; -webkit-transition-timing-function: linear; -moz-transition-timing-function: linear; } #voiture2{ z-index: 100; position: absolute; top: 315px; left: 144px; } #voiture3{ z-index: 100; position: absolute; top: 315px; left: 240px; } #bigrig{ z-index: 100; position: absolute; top: 365px; left: 200px; } #bigrig2{ z-index: 100; position: absolute; top: 365px; left: 400px; } #bigrig3{ z-index: 100; position: absolute; top: 365px; left: 600px; } #hotrod{ z-index: 100; position: absolute; top: 265px; left: 200px; } #hotrod2{ z-index: 100; position: absolute; top: 265px; left: 500px; } #hotrod3{ z-index: 100; position: absolute; top: 265px; left: 750px; } #turtle{ z-index: 100; position: absolute; top: 175px; left: 50px; } #turtle2{ z-index: 100; position: absolute; top: 175px; left: 450px; } #turtle3{ z-index: 100; position: absolute; top: 175px; left: 250px; } #small{ z-index: 100; position: absolute; top: 125px; left: 20px; } #small2{ z-index: 100; position: absolute; top: 125px; left: 220px; } #small3{ z-index: 100; position: absolute; top: 125px; left: 420px; } #small4{ z-index: 100; position: absolute; top: 125px; left: 620px; } #med{ z-index: 100; position: absolute; top: 75px; left: 120px; } #med2{ z-index: 100; position: absolute; top: 75px; left: 320px; } #med3{ z-index: 100; position: absolute; top: 75px; left: 520px; } I had to say that I'm in the obligation to code in HTML5, CSS3, and Javascript but not jQuery, who is way more easier, I already created games in jQuery... It takes me too much time and too much code lines right here.

  Read the article

• How to Prevent Site For Penality [on hold]

  - by Simon Walker

  I have been working hard to recover site from Penguin 2.0 and I was successful in it. A week before Penguin 2.1 one of my competitor created thousands of spam backlinks in just 2 days. The timing is more than perfect to make my website victim of Penguin 2.1. I have disavowed all those dirty links and regularly updating the disavow sheet for poor backlinks. Is there else I can do with the site to recover faster. http://bit.ly/fvbyLg

  Read the article

• Friday Fun: Liquid

  - by Asian Angel

  In this week’s game you will need a mix of patience, timing, and a touch of strategy in order to achieve victory in this physics puzzler. Can you successfully control all of the liquid while moving it towards a victorious finish or will it all ‘go down the drain’? How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8 How to Banish Duplicate Photos with VisiPic

  Read the article

• YouTube API Office Hours June 6, 2012

  YouTube API Office Hours June 6, 2012 This is a recording of the YouTube API Hangout on Air from Wednesday 6/6 at 10am PDT (UTC-7). JJ Behrens interviewed Neal Norwitz, a senior engineer at YouTube and well-known Python developer, about Google's engineering culture. We also had a surprise guest, Adrian Holovaty, co-benevolent dictator for life of the open-source Django web framework, who asked several questions about fine-grained timing control in the player APIs. From: GoogleDevelopers Views: 650 14 ratings Time: 39:07 More in Science & Technology

  Read the article

• Implementing traffic conditions in TORCS

  - by user1837811

  I am working on a project about "Effects of Traffic conditions and Track Complexity on Car Driving Behavior". Is it possible to implement traffic in TORCS, or should I use another car simulator? By the word "traffic" I mean there are cars running on both tracks in both directions and I can detect the distances, direction and speed of these cars. Depending on this information I can decide whether I should slow down, speed up and calculate the correct timing to overtake.

  Read the article

• Where to after a year of java? [closed]

  - by avatarX

  I've just finished a my first year of programming Java at varsity and I have a three month break. In terms of my development would it be better to: Cover Java in more depth to acquire a more intermediate level of ability Learn a new programming language (if so which) to a similar level as my current Java ability Spend timing learning introductory discrete maths, algorithms and data structures I'm also open to any other possibilities that would be beneficial but that could be covered in about 3 months.

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >