Search Results

Search found 23449 results on 938 pages for 'browser close'.

Page 701/938 | < Previous Page | 697 698 699 700 701 702 703 704 705 706 707 708  | Next Page >

  • Failed to su after making a chroot jail

    - by arepo21
    On a 64 bit CentOS host I am using script make_chroot_jail.sh to put a user in a jail, not permitting it to see anything expect it's home at /home/jail/home/user1. I did it typing this: sudo ./make_chroot_jail.sh user1 after, when trying to connect to user1 first i was getting an error like: /bin/su: user guest does not exist i have fixed this by copying some missed libraries: sudo cp /lib64/libnss_compat.so.2 /lib64/libnss_files.so.2 /lib64/libnss_dns.so.2 /lib64/libxcrypt.so.2 /home/jail/lib64/ sudo cp -r /lib64/security/ /home/jail/lib64/ But now, when trying to connect to user1 typing su user1 and then typing it's password, i am getting this error: could not open session So the question is how to connect to user1 in this situation? P.S. Here are the permissions of some files, this might be helpful in order to provide a solution: -rwsr-xr-x 1 root root /home/jail/bin/su drwxr-xr-x 4 root root /home/jail/etc -rw-r--r-- 1 root root /home/jail/etc/pam.d/su -rw-r--r-- 1 root root /home/jail/etc/passwd -rw------- 1 root root /home/jail/etc/shadow UPDATE1 After some modifications i managed to connect to user1, but the session closes immediately! I guess this a PAM issue, however cant find a way to fix it. Here the log entry for close action from /val/log/secure: Oct 6 15:19:42 localhost su: pam_unix(su:session): session closed for user user1 What makes the session to exit immediately after launching?

    Read the article

  • Why doesn't the Windows 7 volume mixer remember per-application levels for all applications?

    - by mdives
    If I have the device's master level set to 50, and then lower an application level to 25; Once I close that application and reopen it, the volume levels should persist. The master level should remain at 50 and the application's at 25. This does happen for most applications. However, for one in particular, Napster, it does not. I subscribe to Napster's streaming service. I use the Napster desktop application to connect to that service. Every time that I open the Napster app, I have to adjust the application's volume level down in the volume mixer. When I open the app again after closing it, I have to do the same thing, the volume mixer is not remembering the set level. In fact. The level is reset back to 50, the same level as the device's master level. Has anyone else experienced this, with Napster or any other application? Is there a solution or is this a known issue?

    Read the article

  • Unable To Install SQL Server 2008 On Windows 7 & Windows XP

    - by mickburkejnr
    Hi Guys, you are my final hope of salvation! For the last five hours I've been trying to install SQL Server 2008, first on Windows 7 and then Windows XP. Both have had the same issue. Even before the installation starts, an error message appears saying: Microsoft .NET Framework 3.5 SP1 installation has failed. SQL Server 2008 Setup requires .NET Framework 3.5 SP1 to be installed. I have installed everything in the hope of getting past this. the service pack it refers to has even been installed and I can see them in the control panel! I have installed Framework 2.0, Framework 2.0 SP1, Framework 3.5, Framework 3.5 SP1, Windows Installer 3.5 and Windows Installer 4.0. Even installed the Service Pack for SQL Server 2008.... But, nothing, works! Does anyone have an idea what I'm doing wrong or what could be wrong? I'm seriously close to the end of my tether, I've even sent Steve Ballmer an email with my frustration. I would seriously appreciate some help with this. Many thanks!

    Read the article

  • Why can't I specify the executable that opens file with extension on windows?

    - by Glen S. Dalton
    I am on windows server 2003, but I guess it is the same on windows xp. This is a superuser question, because it is definitly desktop, so do not move or close it. Question: I copied some movable applications (usually people create them for usb sticks) to locations like c:\bin\app1\app1.exe app1.exe can open files of type *.ap1 When I rightclick file.ap1 and choose "open with ..." the "Open with" dialog appears. But it is not working how I expect in this situation. I can choose c:\bin\app1\app1.exe with the "Browse" button, but: app1.exe will not appear in the dialog where I just choosed it in the programs list, like I am used to it after clicking OK on it in the browse dialog. app1.exe will not open it when I click ok in the "Open with" dialog, the application that was assigned until then will still open it What could be the reason? Edit: Additional Information: my account is member of the administrators group I just changed the permissions of the folder c:\bin\app1\ and made sure that the group "Administrators" has all rights. I also inherited this manually to all subfodlers and subfiles.

    Read the article

  • I accidentally hijacked my localhost

    - by Zach L
    Opening localhost in the browser is pointing a local webpage (examplePage) after playing with some config files a while back, and I can't figure out how to restore the default behavior. Background: I have XAMPP installed on my Windows 7 machine, and a webpage at c:/xampp/htdocs/examplePage. A couple weeks ago, I was on a mission to get sites root-relative urls (/resource) to work, so I played around with a bunch of apache/conf files, including httpd.conf and httpd-vhosts.conf and also was messing with the Windows hosts file. I gave up at some point, didn't document exactly what I did, and have since probably forgotten some of what I did. Many of my changes stemmed from suggestions in this StackOverflow post What I've Tried I commented out my additions to the hosts file I turned off XAMPP (thus hopefully negating any apache config file effect) I reverted to my original DocumentRoot in httpd.conf anyway (xampp/htdocs) localhost still displays examplePage. Even with xampp turned on (my reverted DocmentRootisn't taking effect) Does anyone know what I may have done and how I can fix it? Update : Its been resolved, thank everyone so much in taskmanager, theres a couple instances of httpd.exe (Apache HTTP Server). I ended these, and opened XAMPP, restarting apache. all references to examplePage in my .conf files that I could find had been commented out or removed. I imagine that the old versions were still in effect for some reason, and manually ending the Apache processes fixed this. As a point of interest, Its still a mystery why those processes were running - I cannot reproduce that situation. I must've stumbled upon a XAMPP bug of some sort.

    Read the article

  • Apache: rewrite port 80 and 443 - multiple SSL vhosts setup

    - by Benjamin Jung
    SETUP: multiple SSL domains are configured on a single IP, by using vhosts with different port numbers (on which Apache listens) Apache 2.2.8 on Windows 2003 (no comments on this pls) too many Windows XP users so SNI isn't an option yet There may be reasons why it's wrong to use this approach, but it works for now. vhosts setup: # secure domain 1 <VirtualHost IP:443> SSL stuff specifying certificate etc. ServerName domain1.org </VirtualHost> # secure domain 2 <VirtualHost IP:81> SSL stuff for domain2.org ServerName domain2.org </VirtualHost> GOAL: Some folders inside the domain2.org docroot need to be secure. I used a .htaccess file to rewrite the URL to https on port 81: RewriteEngine On RewriteCond %{SERVER_PORT} !^81$ RewriteRule (.*) https://%{HTTP_HOST}:81%{REQUEST_URI} [R] Suppose I put the .htaccess in the folder 'secfolder'. When accessing http://domain2.org/secfolder this gets succesfully rewritten to https://domain2.org:81/secfolder. ISSUE: When accessing https://domain2.org/secfolder (without port 81), the certificate from the first vhost (domain1.org) is used and the browser complains that the site is insecure because the certificate is not valid for domain2.org. I thought that RewriteCond %{SERVER_PORT} !^81$ would also rewrite https://domain2.org to https://domain2.org:81, but it doesn't. It seems that the .htaccess file is not being used at all in this case. At this point I am not sure how to apply a RewriteRule to https://domain2.org. I tried creating an additional vhost for domain2 on port 443 before the one for domain1.org, but Apache seems to choke on that. I hope someone of you has an idea how to approach this. TIA.

    Read the article

  • debian VM refusing all traffic apart from http

    - by james lewis
    I've got a VM with a fresh install of Debian (wheezy) and I've installed node and mongo on it. The VM is using a bridged network connection so I was expecting to be able to point my host machines browser at the ip address of the Debian VM (port 1337 for my node example or port 28017 for my mongo status page) and see one of the two services (node or mongo). My requests are refused though. As far as I can tell Debian allows all traffic by default and you have to manually configure iptables to drop traffic. I've checked iptables and it says it's setup to allow anything through. It looks like this: root@devbox:/home/jlewis# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination As a test I setup nginx and I was able to get to the nginx landing page from my host no problems so obviously http traffic is allowed. I then set nginx up to forward all traffic upstream to mongo - no problems there, I was able to see the status page. I then did the same for my example node server and again, no problems. So http traffic is fine, but all other traffic is blocked. Anyone know why debian might be refusing all other traffic other than iptables being setup to drop it? EDIT - output from netstat -nltp: Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 127.0.0.1:28017 0.0.0.0:* LISTEN 1762/mongod tcp 0 0 0.0.0.0:51028 0.0.0.0:* LISTEN 1541/rpc.statd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2462/sshd tcp 0 0 127.0.0.1:1337 0.0.0.0:* LISTEN 2794/node tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 2274/exim4 tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 1762/mongod tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1510/rpcbind tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 2189/nginx tcp6 0 0 :::22 :::* LISTEN 2462/sshd tcp6 0 0 :::45335 :::* LISTEN 1541/rpc.statd tcp6 0 0 ::1:25 :::* LISTEN 2274/exim4 tcp6 0 0 :::111 :::* LISTEN 1510/rpcbind

    Read the article

  • SSL stops working on IIS7 after a reboot

    - by Mark Seemann
    I have a Windows 2008 Server with IIS7. Every time the server reboots, SSL stops working. Normal HTTP requests work fine, but any request to an HTTPS address gives the typical error message in the browser: Cannot find server or DNS I can temporarily fix it by opening IIS Manager and bring up the Bindings… window for the website in question. Then I select “https”, click on “Edit” then click “Ok” without making any changes to the settings. After doing this, browsing to https:// works again until the next reboot. This issue look as lot like the one described here, but according to the Certificates MMC snapin, the certificate in question does have a private key. I'm also pretty sure that I never installed the certificate in the personal store, but imported it straight into the machine store, but it's been a while... There's not a lot in the event log apart from the event ID 36870 also described in the post I linked to. Can anyone help me troubleshoot this issue so that SSL will work even after a server reboot?

    Read the article

  • What would cause an IIS6 website to be unavailable remotely randomly for a few minutes at a time?

    - by jskunkle
    Website is served by iis6 on windows server 2003. Never saw this problem once for months in beta. We made the new site live yesterday - its getting more traffic than in beta but not that much - resource utilization on the server and speed are fine. Today the site has been unavailable remotely a few (4?) times for a few minutes at a time. If you visit any page on the site - nothing is ever returned and eventually the request times out. While this is happening - I can connect to the server via remote desktop and the site loads fine from the live url when running a browser on the server locally. Other websites on the server continiue to function fine the entire time (using the same instance of iis, different app pools). Other computers on the same network can't access the website either. Other than not serving content - the server seems to behave normally - scheduled jobs in our custom job system continue to run, etc. We've looked at the iis logs quickly and we don't see any traffic out of the ordinary - no traffic spikes, etc. Any ideas? Thanks, Shane

    Read the article

  • Processing-time billing in Amazon EC2

    - by Rafael Almeida
    Hi all! I think my question is fairly basic, but I would like a clarification: in the Pricing part of AWS we can see that Amazon charges people around .10 by the 'instance computing hour'. I've seen in a blog post somewhere (can't remember where exactly, and even if I did I think it was in Portuguese anyway) that this way your minimum monthly payment would be $72 (= .10 $s/hour x 24 hours x 30 days). Is this correct? (I don't think it is!) In my understanding is that this 'virtual computing time' is only used when your machine is actually doing something (serving pages, serving the admin via ssh, whatever), so real billable usage would be less than 720 hours/month in most webserver scenarios. Is my view correct? If it is, then it leads me to another question: is it economically interesting to buy access to one of these instances for testing? I mean, would I have the 'freedom' to 'forget' about it for a month and receive a very-close-to-zero (as in, a few cents) bill? Do you do it/know of anybody who does? Any thoughts on the matter (as in, "yes, it's a good idea", or "yes, but there's this 'gotcha': ...", or "no, nobody does it because of...")? PS: sorry for the loong question text. I highlighted the main questions for easy view. Also, I'm not sure if this question is actually more than one and if it's desirable for the community, so, sorry if it is too! Thanks in advance!

    Read the article

  • Massive SQL issue shutting down our site.

    - by Pselus
    Our website has started timing out like crazy today. All of our clients are finding it unusable. The only error we can seem to trace down as a potential problem is this: SQLAllocHandle on SQL_HANDLE_DBC failed Error ASP Description Error Category Microsoft OLE DB Provider for ODBC Drivers I have no idea what it means or how to go about fixing it. Anyone ever encountered this error before? Currently, you can log in to our site, but then once you go to do anything else, you find yourself logged out or nothing happens. We have a lot of Ajax going on so the "nothing happens" probably has to do with the Ajax pages not loading properly due to logouts and so nothing displays to the user. Like I said, I'm at a loss. Anyone have any advice on this error? EDIT I realize that this isn't necessarily a programming question, but we are a small startup company that just yesterday started talking about how we need to get a backup server running. Apparently we talked about it too late. We don't have a DBA, just 2 mid level programmers trying their hardest to keep our clients happy. So please, if you have any assistance give it but please don't close my question right now. EDIT 2 Turns out we had something on our server running called "ServerMask" that makes our IIS server look like Apache to the outside world. Shutting it down fixed our issue. Still no idea why it was messing up but it was the problem apparently. Thanks to everyone who tried to help.

    Read the article

  • Windows 7 - Windwos XP - sharing - why isn't working?

    - by durumdara
    Hi! This is seems to be "hardware" and not "software" / "programming" question, but I need to use this share in my programs, so it is "close to programming". We had an XP based wireless network. The server is XP Professional, the clients are XP Home (Notebooks). This was working well with folder sharing (with user rights, not simple share). Then we replaced the one of the notebook with Win7/X64 notebook. First time this can reach the server, and the another client too. Later I went to another sites, and connect to another servers, another networks. And then, when I return to this network, I saw that I cannot connect to this server. Nothing of resources I see, and when try to dbl click on this computer, I got login window, where I can write anything, never I can login... The interesting part, that: Another XP home can see the server, can login as quest, or with other user. The server can see the XP home notebook. The Win7 can see the notebook's shared folders, and XP home can see the Win7 shared folders. The server can see the Win7 folders, BUT: the Win7 cannot see the server folders. Cannot see the resources too... The Win7 is in "work networking group", the group name is not mshome. I tried everything on the server, I tried to remove MS client, restore it with simple sharing, set guest password, etc., but I lost the possibilities to access this server from Win7. Does anyone have any idea what I need to see, what I need to set to access these resource - to use them in my programs? Thanks for every info, link: dd

    Read the article

  • arp requests are sent continuously and my linux machine disconnected to the world

    - by sees
    I have the following problem and really need your help I'm implementing a small server to receive request from client on port 18999(just sample) using TCP socket. When I tested my server by using a lot of requests from a tablet through a router, I got the ARP problem(?) My net work just like: TABLET <------- WIRELESS ROUTER <------- MY SERVER (LINUX) Problems: 1. Can not connect to my Linux any more ( telnet, ping v.v...unreachable) 2. I use serial cable to connect to my Linux machine and use Wiresharp (from Windows) to catch the send message from Linux. It says that Linux keeps sending out continuously every 3 seconds ARP messages like the following: xx:xx:99:77:ff:69 ff:ff:ff:ff:ff:ff ARP 60 Who has 192.168.10.2? Tell 192.168.10.3 In the above message: xx:xx:99:77:ff:69 my Linux MAC address 192.168.10.2 my Tablet address 192.168.10.3 my Linux IP address Can you help me figure out the problem? Or tell me the way to detect the problem and reset the network back to normal (maybe restart Linux but I want to detect problem and restart automatically) UPDATE: 1. The above network works normally if tablet sends messages to my LINUX in normal speed (but also down after 48 hours) 2. The router works again after I unplugged my Linux ethernet cable (RJ45) from router. 3. The wireless network still works ( I can browser the router page from tablet) 4. When I use: ifconfig down then ifconfig up , the Linux restarts (?????????)

    Read the article

  • CouchDB Errors: "undefined symbol: js_fgets" on Ubuntu 10.04

    - by MattEzell
    Hello, ServerFault Community. I have been wrestling with this problem for weeks without resolution and was hoping that someone here might be able to help. As indicated above, this is in Ubuntu 10.04 (x86) using CouchDB 0.11.0. I have build and installed CouchDB 0.11.0 from source. Everything with the dependencies and with the CouchDB install itself 'goes off without a hitch' - no errors or complaints in the configure, make or install... CouchDB seems to be running 'fine'. I can access Futon without issue and utilize all CouchDB functionality found in Futon... Unfortunately, when I attempt to use any shows/views for an installed Couch App, I get the above js_fgets error before terminal (and the Couch log) fills up with TONS of JSON. Nothing ever renders in the browser, though Firebugs reports. I have used the official instructions (paying special attention to the 10.04 instructions) and have followed pretty much every Google thread that I can find on similar issues. I have chase SpiderMonkey (and Rhino) as well as Erlang as the culprit, but despite reinstalls and tests with these components, I still cannot get past this CouchDB issue on my system... Ideas? Pointers? Suggestions? Has anyone successfully installed and used CouchDB 0.11.0 on an Ubuntu 10.04 system to RUN APPLICATIONS? I have come across multiple individuals who immediately respond 'yes, I have it installed - it works great' only to have them realize in the end (as I did) that just because Futon thinks things are working, doesn't mean CouchDB is properly handling ALL requests. Thank you for your time and assistance!

    Read the article

  • Cannot ping Google Public DNS on 8.8.8.8

    - by Tibor
    I have a weird problem on my Windows 7 (x64) computer. I seem to cannot ping the Google Public DNS on one of its addresses (while the other works fine). The peculiar thing is that it fails with the General failure. error message which usually means that there is a problem with a network adapter/base connectivity and not a timeout as one would expect. I checked my routing tables for any anomalies and I even flushed them but the problem seems unrelated. All the other hosts I tried ping fine (either respond or timeout). If I try to tracert or connect to the address via browser (yes, I know that it doesn't listen on port 80), it also fails instantaneously. The reason I need to ping 8.8.8.8 is that I commonly use it as a test of Internet conectivity due to it being rememberable. The problem occurs no matter where I connect to the Internet (it is a laptop computer). What could be the cause of this anomaly? Note: I use native IPv6 connectivity.

    Read the article

  • Stream video from a computer to a tablet

    - by NullOrEmpty
    I would like to watch presentations and college videos I have on my computer, from my tablet. There are almost a hundred of GB in videos, so I would like to watch them in streaming from my computer. My wife has also tons of videos so I have decided to do a kind of streaming local service to watch the videos from our tablets. I have found an article about how to do it with Internet Information Server, but the article is relaying in an application that is not free (Expression Encoder). Since this is for home fun, I am not willing to pay, so I would like to ask for some free encoder that can do the trick. I have no idea about streaming. Actually, I tried to hang the files directly on IIS, and the browser tried first to download some of them and some other (mp4?) got played badly, so I could not get a smooth video experience. What is missing? What is the deal with H.264 ? Can I roll with VC-1 and play videos in my Android tablet with streaming with an acceptable quality through my WLAN home network? Any better solution? Thanks.

    Read the article

  • Apache2 VirtualHost on Debian not working

    - by milo5b
    I am having some problems with Apache2 configuration. I have already tried to look for documentation on the web (Apache's site, Debian's site, here on serverfault, etc), but nothing really helps. I have tried different configurations, but my current configuration is the following (/etc/apache2/sites-available/default): <VirtualHost *:80> ServerAdmin [email protected] ServerName mysite.dev ServerAlias mysite.dev DocumentRoot /var/www/mysite.dev/httpdocs/ ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] ServerName livesite.com ServerAlias www.livesite.com DocumentRoot /var/www/livesite.com/httpdocs/ <Directory /var/www/livesite.com/httpdocs/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> mysite.dev it's just an entry in hosts file on my client machine, while livesite.com it's an actual DNS record which would resolve to the same IP as the IP set in hosts file for mysite.dev. The problem is that when i try to type mysite.dev in my browser, it would automatically go to livesite.com. I tried to have different /etc/apache2/sites-enabled/ files (/etc/apache2/sites-enabled/mysite.dev , /etc/apache2/sites-enabled/livesite.com ) - and of course with the actual sites-available related files, but achieving the same results. I have tried to have a peak on error.log and access.log but there's nothing I can see. My httpd.conf contains: AccessFileName .htaccess And I have no /etc/apache2/conf.d/virtual.conf file. Any help would be greatly appreciated - if I did not provide enough info please let me know I will do my best to provide all necessary info. Thanks

    Read the article

  • Win XP error 0x80041003 using GetObject/winmgmts

    - by John Lewis
    My computer is called "neil" and I want to set some values using WMI in vbScript. I adapetd the script below from one supplied by Microsoft. When I run it in my browser I get Error Type: (0x80041003) /dressage/30/pdf2.asp, line 8 I suspect it is some registry/security setting. Any advice? John Lewis FULL SCRIPT call Print_HTML_Page("http://neil/dressage/ascii.asp", "ascii") Sub SetPDFFile(strPDFFile) Const HKEY_LOCAL_MACHINE = &H80000002 strKeyPath = "SOFTWARE\Dane Prairie Systems\Win2PDF" strComputer = "." Set objReg=GetObject( _ "winmgmts:{impersonationLevel=impersonate}!\\" & _ strComputer & "\root\default:StdRegProv") strValueName = "PDFFileName" objReg.SetExpandedStringValue HKEY_LOCAL_MACHINE,_ strKeyPath,strValueName,strPDFFile End Sub Sub Print_HTML_Page(strPathToPage, strPDFFile) SetPDFFile( strPDFFile ) Set objIE = CreateObject("InternetExplorer.Application") 'From http://www.tek-tips.com/viewthread.cfm?qid=1092473&page=5 On Error Resume Next strPrintStatus = objIE.QueryStatusWB(6) If Err.Number 0 Then MsgBox "Cannot find a printer. Operation aborted." objIE.Quit Set objIE = Nothing Exit Sub End If With objIE .visible=0 .left=200 .top=200 .height=400 .width=400 .menubar=0 .toolbar=1 .statusBar=0 .navigate strPathToPage End With 'Wait until IE has finished loading Do while objIE.busy WScript.Sleep 100 Loop On Error Goto 0 objIE.ExecWB 6,2 'Wait until IE has finished printing WScript.Sleep 2000 objIE.Quit Set objIE = Nothing End Sub

    Read the article

  • Fresh Proxmox VE 2.1 installation with defaults can't be reached or pinged

    - by Damainman
    I am using the lastest Proxmox VE 2.1. My server has two NICS with a uplink only connected into eth0. My Server is a co-located server utilizing public IPv4 IPs. It is not behind a firewall or any system which monitors traffic. Via IPKVM I did a fresh install of Proxmox, I put in the correct IP, Mask, Gateway, and DNS information. The install went perfectly fine with no errors. Upon completion and rebooting the system: I am unable to reach the web GUI via the browser, it just times out. I am unable to ping the server. I am unable to ping outside to the Internet from within the server. Tried pinging out to 4.2.2.2 and yahoo.com I tried rebooting the server and restarting the network service. IFCONFIG shows my IP information under vmbro0 which also has the same MAC address as the eth0 device. eth0 only displays a IPv6 Scope:Link address, which I did not setup myself. This is my first time installing proxmox, but after searching for a few hours it doesn't seem like anyone else is having the same issue as me from a fresh install with just the defaults. So far the only thing I did was install it. Also, I know the network cable is good and the IP is good because I was running a Xen XCP server with the same network settings prior to wiping it to install proxmox. Some additional information: for pveversion -v (Installed proxmox-ve_2.1-f9b0f63a-26.iso) pve-manager: 2.1-1 (pve-manager/2.1/f9b0f63a) running kernel: 2.6.32-11-pve proxmox-ve-2.6.32: 2.0-66 netstat -nr (note: .136 is my network, and .137 is my gateway) Destination - Gateway - Genmask xxx.xxx.xxx.136 - 0.0.0.0 - 255.255.255.248 0.0.0.0 - xxx.xxx.xxx.137 - 0.0.0.0 /etc/network/interfaces auto lo iface lo inet loopback auto vmbr0 iface vmbr0 inet static address xxx.xxx.xxx.138 netmask 255.255.255.248 gateway xxx.xxx.xxx.137 bridge_ports eth0 bridge_stp off bridge_fd 0

    Read the article

  • Pattern matching gnmap fields with SED

    - by Ovid
    I am testing the regex needed for creating field extraction with Splunk for nmap and think I might be close... Example full line: Host: 10.0.0.1 (host) Ports: 21/open|filtered/tcp//ftp///, 22/open/tcp//ssh//OpenSSH 5.9p1 Debian 5ubuntu1 (protocol 2.0)/, 23/closed/tcp//telnet///, 80/open/tcp//http//Apache httpd 2.2.22 ((Ubuntu))/, 10000/closed/tcp//snet-sensor-mgmt/// OS: Linux 2.6.32 - 3.2 Seq Index: 257 IP ID Seq: All zeros I've used underscore "_" as the delimiter because it makes it a little easier to read. root@host:/# sed -n -e 's_\([0-9]\{1,5\}\/[^/]*\/[^/]*\/\/[^/]*\/\/[^/]*\/.\)_\n\1_pg' filename The same regex with the escape characters removed: root@host:/# sed -n -e 's_\([0-9]\{1,5\}/[^/]*/[^/]*//[^/]*//[^/]*/.\)_\n\1_pg' filename Output: ... ... ... Host: 10.0.0.1 (host) Ports: 21/open|filtered/tcp//ftp///, 22/open/tcp//ssh//OpenSSH 2.0p1 Debian 2ubuntu1 (protocol 2.0)/, 23/closed/tcp//telnet///, 80/open/tcp//http//Apache httpd 5.4.32 ((Ubuntu))/, 10000/closed/tcp//snet-sensor-mgmt/// OS: Linux 9.8.76 - 7.3 Seq Index: 257 IPID Seq: All zeros ... ... ... As you can see, the pattern matching appears to be working - although I am unable to: 1 - match on both the end of line ( comma , and white/tabspace). The last line contains unwanted text (in this case, the OS and TCP timing info) and 2 - remove any of the un-necessary data - i.e. print only the matching pattern. It is actually printing the whole line. If i remove the sed -n flag, the remaining file contents are also printed. I can't seem to locate a way to only print the matched regex. Being fairly new to sed and regex, any help or pointers is greatly appreciated!

    Read the article

  • Best way to convert episodic DVDs for Windows Media Center?

    - by Roger Lipscombe
    I'm archiving my DVD collection. My goal is to be able to play them back in Windows Media Center. For feature-length DVDs, I'm using AnyDVD and CloneDVD, which is working well. For playing back TV shows (and other episodic content), I'm using Media Browser, which doesn't support a VIDEO_TS folder per episode. It expects the shows to be broken up into one file per episode (e.g. "Willo the Wisp - S01E12.avi"). For this, I'm attempting to use Handbrake, which, for extracting the episodes from DVD (or already-ripped VIDEO_TS folder), is working pretty well. The problem that I have is that the default x264 encoder over-compresses the resulting video stream, which results in hideous artifacts in animated shows. The aforementioned Willo the Wisp is a particularly bad example, because the original DVD is particularly "noisy". If I switch to using the ffmpeg encoder, the artifacts are gone in Windows Media Player, but I can't get the resulting files to play back in Windows Media Center. I see the first frame, and then there's an error message. I've installed the CCCP codec collection, but it doesn't seem to have made any difference. So: what's the best way to convert VIDEO_TS to individual episode files for playback in Windows Media Center?

    Read the article

  • Postfix a lot of relay acces denied errors in maillog

    - by tester3
    I'm on Centos 6.5 with Postfix/Dovecot and some virtual domains. Postfix works fine, but I've got a lot of messages like this "NOQUEUE: reject: RCPT from 1-160-127-12.dynamic.hinet.net[1.160.127.12]: 454 4.7.1 : Relay access denied; from= to= proto=SMTP" in my maillog. I've tried to close port 25 with iptables, when I do so - I got no such messages, but my mail system starts work incorrectly and can't receive mail from other hosts. Please help! My postconf -n: alias_database = $alias_maps alias_maps = hash:/etc/postfix/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all inet_protocols = ipv4 mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man message_size_limit = 20971520 mydestination = localhost.$mydomain, localhost newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relay_domains = * sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_tls_cert_file = /etc/pki/tls/certs/example.com.crt smtp_tls_key_file = /etc/pki/tls/private/example.com.key smtp_tls_loglevel = 1 smtp_tls_session_cache_database = btree:/etc/postfix/smtp_tls_session_cache smtp_tls_session_cache_timeout = 3600s smtp_use_tls = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = example.com smtpd_sasl_path = /var/run/dovecot/auth-client smtpd_sasl_security_options = noanonymous smtpd_sasl_tls_security_options = $smtpd_sasl_security_options smtpd_sasl_type = dovecot smtpd_tls_cert_file = /etc/pki/tls/certs/example.com.crt smtpd_tls_key_file = /etc/pki/tls/private/example.com.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:/etc/postfix/smtpd_tls_session_cache smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes soft_bounce = yes tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 550 virtual_alias_maps = hash:/etc/postfix/vmail_aliases virtual_gid_maps = static:2222 virtual_mailbox_base = /var/vmail virtual_mailbox_domains = hash:/etc/postfix/vmail_domains virtual_mailbox_maps = hash:/etc/postfix/vmail_mailbox virtual_minimum_uid = 2222 virtual_transport = virtual virtual_uid_maps = static:2222 Please help! Will attach master.cf or anything other if needed.

    Read the article

  • Why can't I get rid of default index.html even if I disable the default virtual host in Apache2?

    - by Emre Sevinç
    I have created a virtual host settings file and I disabled the default settings by using a2dissite default (this is a pretty standard Ubuntu 10.04 installation). But no matter what I try my Apache2 server simply keeps on displaying the default index.html page instead of the index.php page that I set up in the virtual host file. Can someone help me what I'm missing. Details follow: No default settings: ls -l /etc/apache2/sites-enabled/ total 0 lrwxrwxrwx 1 root root 51 May 5 13:32 webmin.1273066327.conf -> /etc/apache2/sites-available/webmin.1273066327.conf lrwxrwxrwx 1 root root 34 May 30 11:03 www.accontax.be -> ../sites-available/www.accontax.be Contents of the relevant virtual host: cat /etc/apache2/sites-enabled/www.accontax.be <VirtualHost *> ServerName www.accontax.be ServerAlias accontax.be DirectoryIndex index.php DocumentRoot /var/www/drupal/ <Directory /var/www/drupal/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> </VirtualHost> Contents of httpd.conf: cat /etc/apache2/httpd.conf Listen 80 NameVirtualHost * I also have those relevant lines in my apache2.conf: # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ When I visit http://www.accontax.be I expect apache2 server go to the /var/www/drupal subdirectory and start serving index.php but it simply keeps on serving index.html from /var/www directory. I have reloaded the configuration, restarted the server, deleted my browser cache. Nothing changed. Probably I'm missing a simple yet crucial step but I just could not find it.

    Read the article

  • Repository bugzilla package changed to bugzilla3 in Lenny; upgradable?

    - by Pukku
    This question was asked in debianhelp.org almost half a year ago, but never got an answer. I wasn't the one who posted it, however I was today facing exactly the same question. Not sure if copying it to here as such is considered as inappropriate or something, but there's not really anything that I would even like to paraphrase... So let's just go. (I'm sure you will be happy to close it, if this is not the way to go :) Hello all! We are using a Bugzilla server install on a Debian 4/Etch server and are starting to look at the upgrade to Debian 5/Lenny. I was hoping to upgrade the existing Bugzilla server and database from the oldstable (v2.22) to the newer stable in Lenny (v3) when we get to doing a dist-upgrade. However from testing in a virtual machine it seems that the old package was called "Bugzilla" whereas the Lenny package is called "Bugzilla3" and I could not figure a way to directly upgrade between the two. Is it possible to establish some kind of upgrade path quickly after the dist-upgrade to minimise downtime using apt-get or aptitude? Going on past experiences I would not want to do a fresh install with the Bugzilla3 package and attempt to inject the old database into it (previous attempts failed miserably!) :(

    Read the article

  • Issue with SSL using HAProxy and Nginx

    - by Ben Chiappetta
    I'm building a highly available site using a multiple HAProxy load balancers, Nginx web serves, and MySQL servers. The site needs to be able to survive load balancer or web servers nodes going offline without any interruption of service to visitors. Currently, I have two boxes running HAProxy sharing a virtual IP using keepalived, which forward to two web servers running Nginx, which then tie into two MySQL boxes using MySQL replication and sharing a virtual IP using heartbeat. Everything is working correctly except for SSL traffic over HAProxy. I'm running version 1.5 dev12 with openssl support compiled in. When I try to navigate to the virtual IP for haproxy over https, I get the message: The plain HTTP request was sent to HTTPS port. Here's my haproxy.cfg so far, which was mainly assembled from other posts: global log 127.0.0.1 local0 log 127.0.0.1 local1 notice # log 127.0.0.1 local0 user haproxy group haproxy daemon maxconn 20000 defaults log global option dontlognull balance leastconn clitimeout 60000 srvtimeout 60000 contimeout 5000 retries 3 option redispatch listen front bind :80 bind :443 ssl crt /etc/pki/tls/certs/cert.pem mode http option http-server-close option forwardfor reqadd X-Forwarded-Proto:\ https if { is_ssl } reqadd X-Proto:\ SSL if { is_ssl } server web01 192.168.25.34 check inter 1s server web02 192.168.25.32 check inter 1s stats enable stats uri /stats stats realm HAProxy\ Statistics stats auth admin:********* Any idea why SSL traffic isn't being passed correctly? Also, any other changes you would recommend? I still need to configure logging, so don't worry about that section. Thanks in advance your help.

    Read the article

< Previous Page | 697 698 699 700 701 702 703 704 705 706 707 708  | Next Page >