Search Results

Search found 42786 results on 1712 pages for 'install from source'.

Page 701/1712 | < Previous Page | 697 698 699 700 701 702 703 704 705 706 707 708  | Next Page >

• Port forwarding on Fortigate 50B

  - by sindre j

  I have serious problems setting up port forwarding on a Fortigate 50B. The unit is basically running as factory default, the wan1 interface is connected to my fibre optic internet modem, and my lan is connected to the internal switch of the Fortigate. The factory default firewall policy allowing traffic from the internal interface to wan1 is kept and I'm able to access the interet as normal. Then I added a virtual ip and a firewall policy for allowing access from the internet to my local servers (ip 192.168.9.51) webserver (standard port 80). The settings I made are as follows. Edit Virtual IP Mapping Name : Server VIP External interface : wan1 Type : Static NAT Extermal IP Address/Range : 0.0.0.0 Mapped IP Address/Range : 192.168.9.51 Port Forwading : not checked Firewall policy Source interface/Zone : wan1 Source address : all Destination interface/Zone : internal Destination address : Server VIP Schedule : always Service : HTTP Action : ACCEPT no other settings checked What happens now is that I'm unable to access internet from my server, I'm not getting through to the webserver from internet either. I'm able to ping a site on the outside, but all web traffic is blocked, both ways. I've checked the documentation, but as far as I can tell I have set this up correctly. Anyone here with knowledge of Fortigate port forwading/NAT?

  Read the article

• SCOM, Server 2008 and SQL Server 2008

  - by Jacques

  Hi there, I'm trying to setup SCOM(System Center Operations Manager 2007 (SCOM) – Platform Monitoring) on my Server 2008 machine using SQL Server 2008 running on the same machine. When I check my prerequisites I get problem on SQL and Active Directory components. (I'm running SQL server 2008 and Server 2008 with active directory not installed) Errors: 1.Microsoft SQL Server 2005 Service Pack 1 required. Details: SQL Server 2005 SP1 is the next version of SQL Server. SQL Server 2005 Enterprise Edition, is a complete data and analysis platform for large mission-critical business applications. The link provided in the resolution column is a trial version of the product and is not supported by the Microsoft SQL Server team In order to install active directory needs to be present. Details:Setup failed to verify the presence of Active Directory for this server. I've got a couple of questions I need answering, hope someone can help. Do I need to install Active Directory for SCOM to work? Can I run SCOM with an SQL 2008 Database? How do I get pass these problems?

  Read the article

• Windows Server 2008 R2 DFSR Backlog Troubleshooting - Where to look for the cause of the problem?

  - by caleban

  Our target server indicates it has hundreds of thousands of backlogged transactions. Our authoritative source server indicates it has no backlogged transactions. No replication is taking place. Tests with plain text files aren't replicating. dfsdiag propogation tests fail to propogate. I've restarted the DFS services. I've restarted the servers. I've created new DFS shares to test with. The authoritative source server indicates it has no backlogs and the target indicates it has backlogs (which are the files it's waiting to receive). Files don't replicate in either direction. 2x Windows Server 2008 R2 Standard servers One server is at each of two sites The DFSR shares are on each respective server \site_1_server_1\users \site_2_server_1\users The sites are connected by a T1 DFSR worked for a week. I added a new share, another folder on the same servers, and that replicated for a weekend but never finished. Then all replication stopped. Is Windows DFSR flaky? What tools should I use and what should I look at to identify what's causing this problem?

  Read the article

• How do you import CA certificates onto an Android phone?

  - by f50driver

  Hi all, I want to connect to my University's wireless using my Nexus One. When I go to "Add Wi-Fi network" in Wireless Settings I fill in the Network SSID and select 802.1x Enterprise for the security and fill everything out. The problem is that our university's wireless uses Thawte Premium Server CA certificate for certification. When I click the drop down list for CA certificate I get nothing in the list (just N/A) Now I have the certificate (Thawte Premium Server CA.pem) and have moved it to my SD card, but it doesn't look like Android automatically detects it. Where should I put the certificate so that the Android wireless manager recognizes it. In other words, how can I import a CA certificate so that Android recognizes that it is on the phone and displays it in the CA Certificate drop down list. Thanks for any help, Tomek P.S. My phone is not rooted EDIT: After doing some research it looks like you are able to install certificates by going to your phone's settings Location & Security Install from SD card Unfortunately it looks like the only accepted file extension is .p12. It does not look like there is a way to import .cer or .pem files (which are the only two files that come with the Thawte certificates) at this moment. It does look like you can use a converter to convert your .cer or .pem files to .p12, however a key file is needed. https://www.sslshopper.com/ssl-converter.html I do not know where to get this key file for the Thawte certificates.

  Read the article

• WDS's MDT DeploymentShare and REMINST replicated with DFS-R does not read WIM from local WDS

  - by mbrownnyc

  I've read several guides on using DFS-R with WDS and MDT to replicate REMINST and DeploymentShare, and I have a particularly strange problem. On the receiving server, after configuring WDS and mounting the DeploymentShare into MDT's DeploymentWorkbench, I also performed the following: 1) in .\Control\Bootstrap.ini, changed DeployRoot to \%wdsserver%\DeploymentShare$ 2) Changed the UNC path at the root of the MDT Deployment Share in the DeploymentWorkbench to match that of the current server. 3) In Unattend.xml files located: .\Control**, modified the following value to match the current server: <cpi:offlineImage catelog://HOST/ I am able to boot and grab the LiteTouch PE image off the local WDS TFTP server, but the WIM files, the scripts, everything else is being pulled off the WDS server at the remote site (the original WDS server that was the source of the files within the DFS-R replicated folder). What do I do in order to solve this problem? I've grepped all the files below the DeploymentShare to look for instances of the hostname of the WDS server at the remote site (the source of the files), but I found none. Here are the guides I referred to: http://technet.microsoft.com/en-us/library/cc771324%28WS.10%29.aspx http://blogs.technet.com/b/askds/archive/2009/12/16/wds-and-dfsr-love-at-first-sync.aspx http://oasysadmin.com/2011/11/03/copying-moving-and-replicating-the-mdt-2010-deployment-share/

  Read the article

• How to disable the RAID in x3400 M2

  - by BanKtsu

  Hi I just wanna disable the default RAID in my server IBM System X3400 M2 Server(7837-24X),i have 3 disk drives SAS. I want to make them a JBOD "Just a Bunch Of Disks", because I want to install in the drive 0 CentOS, and the other two make them cache files for a squid server. I disable the RAID in the BIOS: System Settings/Adapters and UEFI drivers/LSI Logic Fusion MPT SAS Driver -PciRoot(0x0)/Pci(0x3,0X0)/Pci(0x0,0x0) LSI Logic MPT Setup Utility RAID Properties/Delete Array Later I boot the CentOS live CD and install the OS in the drive 0, and the others 2 mounted like this: *LVM Volume Groups vg_proxyserver 139508 lv_root 51200 / ext4 lv_home 84276 /home ext4 lv_swap 4032 Hard Drive sdb(/dev/sdb) free 140011 sdc(/dev/sdc) free 140011 sdd(/dev/sdd) sdd1 500 /boot ext4 sdd2 139512 vg_proxyserver physical volume(LVM) But when I restart the server give me the error: Boot failed Hard Disk 0 UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15130,0X0)) ........PXE-E18:Server response timeout. UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15132,0X0)) ........PXE-E18:Server response timeout. and the OS not start. The IBM force me to do a RAID?,why?

  Read the article

• Silent application installation script

  - by Achu

  I use the following script to install application from the server: ECHO OFF IF EXIST "C:\SCRIPTS\drvsw01.cmd" GOTO :L1 C: LABEL System_Drive CD\ MD SCRIPTS COPY U:\Scripts\*.* C:\SCRIPTS\ install.exe -i silent -DLICENSE_ACCEPTED=true -f response_file ECHO "SCRIPTS FOLDER INSTALLATION SUCCESSFUL" :L1 ECHO "JAVA INSTALLATION" U:\Softwares\Java_Run_Time\jre-6u26-windows-i586.exe ECHO "JAVA INSTALLATION SUCCESSFUL" ECHO "OFFICE SOFTWARE INSTALLATION" ECHO "MS OFFICE INSTALLATION" U:\Softwares\Office_2007\setup.exe ECHO "MS-OFFICE INSTALLATION SUCCESSFUL" U:\Softwares\SaveAsPDFandXPS.exe ECHO "MS-OFFICE PDF%XPS Add in INSTALLATION SUCCESSFUL" ECHO "NETWORK SCAN GEAR INSTALLATION" U:\Softwares\ScanGear\english\DISK1\setup.exe ECHO "NETWORK SCAN GEAR INSTALLATION SUCCESSFUL" ECHO "7ZIP INSTALLATION" U:\Softwares\7ZIP\7z457.EXE E CHO "7ZIP INSTALLATION SUCCESSFUL" ECHO "IFAN VIEW INSTALLATION" U:\Softwares\IrfanView_4.5\iview425_setup.exe ECHO "IFAN VIEW INSTALLATION SUCCESSFUL" U:\Softwares\IrfanView\irfanview_plugins_425_setup.exe ECHO "IFAN VIEW PLUGINS INSTALLATION SUCCESSFUL" U:\Softwares\Firefox4\Firefox4.exe ECHO "FIREFOX INSTALLATION SUCCESSFUL" ECHO "FIREFOX PLUGIN INSTALLATION" U:\Softwares\Flash_Player_10\install_flash_player.EXE U:\Softwares\Flash_Player_10\install_flash_player_10_active_x.exe ECHO "FIREFOX INSTALLATION SUCCESSFUL" ECHO "ACROBAT READER 10 INSTALLATION" U:\Softwares\Adobe_Acrobat_Reader_10\AdbeRdr10.exe ECHO "ACROBAT 10 Installation SuccESSFUL" ECHO "INSTALLATION CD burner WINDOWS XP" U:\Softwares\CDburnerxpsetup.exe ECHO "Installation of CD burner Successful" ECHO "INSTALLATION IE8 for WINDOWS XP" U:\SOFTWARE\IE8\IE8-WindowsXP-x86-ENU.exe ECHO "INSTALLATION IE8 SUCCESSFUL" ECHO "THE USER ACCOUNT WOULD BE DELETED" NET USER USER /DELETE ECHO "USER ACCOUNT DELETE SUCCESSFUL" echo %ERRORLEVEL% Now, i want to make this script installing everything silently except MS-Office. Ms-Office b/c i have to customize installing only word, excel & powerpoint. How can i make this script silent? or are there a nice script for this? Thanks,

  Read the article

• How do I upgrade django on ubuntu 9.04?

  - by Lorin Hochstein

  I've got Django 1.0.2 installed on Ubuntu 9.04. I'd like to upgrade Django, because I have an app that needs Django 1.1 or greater. I tried using pip to do the upgrade, but got the following: $ sudo pip install Django==1.1 Downloading/unpacking Django==1.1 Downloading Django-1.1.tar.gz (5.6Mb): 5.6Mb downloaded Running setup.py egg_info for package Django Installing collected packages: Django Found existing installation: Django 1.0.2-final Not uninstalling Django at /var/lib/python-support/python2.6, outside environment /usr Running setup.py install for Django changing mode of build/scripts-2.6/django-admin.py from 644 to 755 changing mode of /usr/local/bin/django-admin.py to 755 Successfully installed Django It seems like it worked, but it refuses to remove the original Django 1.02, and sure enough: $ pip freeze | grep -i django Django==1.0.2-final django-debug-toolbar==0.8.3 django-sphinx==2.2.3 $ /usr/local/bin/django-admin.py --version 1.0.2 final The problem, apparently, is that pip won't uninstall files outside of /usr. I'd like to remove the existing Django files manually, but I have no idea how to do that, because I'm unfamiliar with how Python packages are laid out in Ubuntu. It looks pretty complicated. The site-packages directory is: $ python -c "from distutils.sysconfig import get_python_lib; print get_python_lib()" /usr/lib/python2.6/dist-packages However, that's not where the django files live: $ ls -ld /usr/lib/python2.6/dist-packages/[Dd]jango* ls: cannot access /usr/lib/python2.6/dist-packages/[Dd]jango*: No such file or directory There's a /var/lib/python-support/python2.6/django directory, and the __init__.py file in that directory points to /usr/share/python-support/python-django/django/__init__.py. Clearly, pip is able to figure out where the files live. Is there any way to retrieve the list of files associated with the django package so I can just delete them manually?

  Read the article

• Installing ikiwiki on nginx - fastcgi/fcgi wrapper

  - by meder

  My ultimate goal is to setup ikiwiki, my current goal is to get a fcgi wrapper working for nginx, so I can move on to the next step... The ikiwiki page points out this page as an example for a fcgi wrapper: http://technotes.1000lines.net/?p=23 So far I've installed the ikiwiki and libfcgi-perl modules through aptitude: aptitude install libfcgi-perl aptitude install ikiwiki It installed those packages as well as some minimal dependency packages. So the next step following the guide at technotes, I grabbed http://technotes.1000lines.net/fastcgi-wrapper.pl but I'm not sure where to actually place this file... do I run it as a service? The script makes a socket file in /var/run/nginx but that directory does not exist.. do I manually create it? So in addition to the .pl file for the cgi wrapper, I need to also define a separate cgi file for parameters. If my conf looks like this... server { listen 80; server_name notes.domain.org; access_log /www/notes/public_html/notes.domain.org/log/access.log; error_log /www/notes/public_html/notes.domain.org/log/error.log; location / { root /www/notes/public_html/notes.domain.org/public/; index index.html; } } And I don't have a cgi-bin directory, where exactly should I create it within my structure, and regarding that I'd obviously have to update the below before I include it in my conf, but I'm just not exactly sure how this would work out. # /cgi-bin configuration location ~ ^/cgi-bin/.*\.cgi$ { gzip off; fastcgi_pass unix:/var/run/nginx/perl_cgi-dispatch.sock; [1]* fastcgi_param SCRIPT_FILENAME /www/blah.com$fastcgi_script_name; [2]* include fastcgi_params; [3]* } Also since the user is www-data and /var/run is root owned, what's the proper way of giving it access? Any tips appreciated.

  Read the article

• Why does snmp fail to use its own MIBs?

  - by chrisdew

  I've done a fresh install of Ubuntu 12.04LTS, and installed the snmpd and snmp packages. If I type: snmpwalk -m ALL -v2c -c public localhost 1.3 I get swathes of errors, of the form: Cannot adopt OID in SQUID-MIB: cacheClients ::= { cacheProtoAggregateStats 15 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendLineIndex ::= { nsExtendOutput2Entry 1 } Cannot adopt OID in NET-SNMP-EXTEND-MIB: nsExtendOutLine ::= { nsExtendOutput2Entry 2 } Cannot adopt OID in UCD-SNMP-MIB: laIndex ::= { laEntry 1 } Cannot adopt OID in UCD-SNMP-MIB: laNames ::= { laEntry 2 } Cannot adopt OID in UCD-SNMP-MIB: laLoad ::= { laEntry 3 } Cannot adopt OID in UCD-SNMP-MIB: laConfig ::= { laEntry 4 } Cannot adopt OID in UCD-SNMP-MIB: laLoadInt ::= { laEntry 5 } Cannot adopt OID in UCD-SNMP-MIB: laLoadFloat ::= { laEntry 6 } Cannot adopt OID in UCD-SNMP-MIB: laErrorFlag ::= { laEntry 100 } Cannot adopt OID in UCD-SNMP-MIB: laErrMessage ::= { laEntry 101 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsNotifyRestart ::= { netSnmpNotifications 3 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsNotifyShutdown ::= { netSnmpNotifications 2 } Cannot adopt OID in NET-SNMP-AGENT-MIB: nsNotifyStart ::= { netSnmpNotifications 1 } There a literally hundreds of these. If snmp doesn't even like the distro-included MIBs, what chance to I have of getting my own used? (I get the same form of error with my own MIB, on a different machine, which is why I set up a clean install.) Do other distros have this issue? Is there something obvious that I am overlooking here? Thanks, Chris.

  Read the article

• Random software/shutdown problems Mac mini

  - by Oliver

  Hello I have a Mac mini using OS X 10.5.8. Recently I've been having problems that are becoming increasingly severe. Particular symptoms: Firefox "quits" but the dot on the dock remains. If I try shutting down at this point I can't and have to use the power button. I can't start Firefox either. Significantly higher than normal crash rate for CS4 Illustrator Photoshop and Dreamweaver. If Firefox remains open when sleeping the Mac, on waking up firefox is completely unresponsive and must be restarted. Can cause problem 1. Today I lost all my FTP settings for Dreamweaver CS4 Bluetooth switches on when booting despite being switched off. Network password retention is somewhat erractic. Tried running Apple Hardware Test as described in the manual. Cannot access install disk by pressing D at startup. My pen tablet (Bamboo) lost my preferences. Tried unstalling software and now cannot re-install. I've never had problems of this level outside warranty before so I don't know much about debugging Macs. Solutions attempted: Disable bluetooth (see problem 5) Disable time machine Run appple harware test (see problem 7) Tried using activity monitor but don't know which processes are normal Tried uninstalling more recent software. I don't have any idea what to do. It seems like a hard disk failure but I don't have the know how to continue.

  Read the article

• Do we need to explicitly pass php.ini's location to php-fpm?

  - by F21

  I am seeing a strange issue where my php.ini is not used if I do not explicitly pass it to php-fpm when starting it. This is the upstart script I am using: start on (filesystem and net-device-up IFACE=lo) stop on runlevel [016] pre-start script mkdir -p /run/php end script expect fork respawn exec /usr/local/php/sbin/php-fpm --fpm-config /etc/php/php-fpm.conf If PHP is started with the above, my php.ini is never used, even though it is in Configuration File (php.ini) Path. This is the relevant part from phpinfo(): Configuration File (php.ini) Path /etc/php/ Loaded Configuration File (none) Scan this dir for additional .ini files (none) Additional .ini files parsed (none) If I modify the last line of the upstart script to point php-fpm to php.ini explicitly: exec /usr/local/php/sbin/php-fpm --fpm-config /etc/php/php-fpm.conf -c /etc/php/php.ini Then we see that the php.ini is loaded: Configuration File (php.ini) Path /etc/php/ Loaded Configuration File /etc/php/php.ini Scan this dir for additional .ini files (none) Additional .ini files parsed (none) Why is this the case? Is this a quirk in php-fpm? Minor update: This also seems to be a problem for php5-fpm installed using apt-get. I did a test install in a Ubuntu Server 12.04 virtual machine by running the following: sudo apt-get install nginx php5-fpm PHP-FPM and nginx were started after installation and everything seemed fine. I then uncommented php's settings in nginx's configuration and placed a test phpinfo() file to inspect PHP's settings. The relevant bits are: Configuration File (php.ini) Path /etc/php5/fpm Loaded Configuration File (none) Scan this dir for additional .ini files /etc/php5/fpm/conf.d Additional .ini files parsed /etc/php5/fpm/conf.d/10-pdo.ini I noted that no php.ini was loaded either. However, if I go to /etc/php5/fpm, I can see that a php.ini exists. I also checked the start up scripts for PHP-FPM and the -c parameter was not used to link the ini file to PHP. This can potentially be confusing for people who would expect php.ini to be loaded automatically by PHP-FPM.

  Read the article

• Intel 1.83 Mac Mini upgraded to 1.5 gig for Snow Leopard

  - by Paula

  Even though I've upgraded countless video cards, RAM, harddrives, motherboards in PCs... this will be my first mac mini RAM upgrade. I've watched the classic "putty knife" video. (Absurd method... but I guess it's what I'm stuck with.) I have a 1.83 Intel-based Mac Mini from 2007-2008, with 1 gig of RAM. (Two 512 sticks) Can I install 1 gig + 512 ? (Or do I have to throw away my existing sticks and buy two 1 gig sticks?) This old machine is rarely used... so I want to spend the absolute minimum on this RAM upgrade. We ONLY use it to run xCode... nothing more. But wanted to increase the RAM so we can install Snow Leopard. I have no idea how many pins the memory has. I printed out over FORTY pages of specs about this machine from "About this Mac"... but didn't find what I needed. Does this sound right: DDR2 SDRAM (but no mention of SO-DIMM) 667MHZ (but don't know if I can use faster also) Pin count: Unknown Computer model number: Unknown (But I "think" it's an MB138/A) PC2 RAM (unknown... not mentioned) 5300 (unknown... not mentioned) Mfg date: (unknown... not mentioned) Number of slots: (unknown... not mentioned) Laptop or desktop RAM: (unknown... not mentioned)

  Read the article

• Windows Backup failed as another backup or recovery is in progress.

  - by remunda

  Hi, i have set up backup schedule on our server. SQL Server 2008 to 01:00am on windows server 2008 R2 to 4:00am. Sql backup runs well, but system backup ends sometimes with error. The error is : http://technet.microsoft.com/en-us/library/dd364768%28WS.10%29.aspx I mean, that is caused by SQL Server, because it unexpectedly runs backup. this is from sql server log (it runs for every database): Date 4.2.2010 4:00:21 Log SQL Server (Current - 29.1.2010 23:25:00) Source spid72 Message I/O is frozen on database master. No user action is required. However, if I/O is not resumed promptly, you could cancel the backup. and Date 4.2.2010 4:00:24 Log SQL Server (Current - 29.1.2010 23:25:00) Source Backup Message Database backed up. Database: master, creation date(time): 2010/01/29(23:25:32), pages dumped: 370, first LSN: 859:56:37, last LSN: 859:80:1, number of dump devices: 1, device information: (FILE=1, TYPE=VIRTUAL_DEVICE: {'{17B91D5C-9968-4D11-A7F1-1A31523D32F0}25'}). This is an informational message only. No user action is required. My questions is: Why runs sql backup with windows backup? How can i dissolve this that errors? Thank you a lot.

  Read the article

• Windows Server 2008 R2, SQL Server 2008 R2, and Registry Backups

  - by charliedigital

  Hi folks! As a developer, I've installed various instances of SQL Sever (2000, 2005, 2008, R2) from all the ways back to 2003 and I've never had an install fail on me....until yesterday. I was installing SQL Server 2008 R2 onto a Windows Server 2008 R2 hosted virtual server and the install finished, but failed on every component. To make matters worse, it was in a state in which I could not uninstall it either, even using command line options! I dug around a bit, but didn't get very far with it. The error is enigmatic and Google didn't turn up much hope. So today, I am going to try again after having the VM image wiped overnight. My question is how can I guard against the same failure today? I don't mind if it fails, but then I know it may be something wrong with the base image I'm getting from the hosting company. I really don't feel like paying another $20 to wipe the VM and I have no idea why it failed. Is it enough for me to backup the registry so that I can restore it in case it fails? What about the installation files? Do I need to have a tool to clean that out, too? Sorry, I'm no sys admin so no real experience with backup/restore aside from System Restore! So any advice would be appreciated!

  Read the article

• Windows 7 Backup not backing up custom library?

  - by James McMahon

  I have created a custom Library under Windows 7 64bit professional to handle my source code. When I tried Windows Backup and Restore for the first time I get the following error Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\Source. Error:(The system cannot find the file specified. (0x80070002)) I've found a thread on the error on the Microsoft answers site. But it appears to be 404 (there is a version in Google's Cache) and the thread starter never gets an answer to his issue that works. The official Microsoft answer on this is This problem is due to one or more profiles under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\ProfileList with missing ProfileImagePath. To check whether you have missing profiles: Open regedit, navigate to the above registry key. (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList). Expand the list Click on each of the profiles listed. The first 3 profiles should have ProfileImagePath value of %SystemRoot%\System32\Config\SystemProfile, %SystemRoot%\ServiceProfiles\LocalService, and %SystemRoot%\ServiceProfiles\NetworkService respectively. Starting from the 4th profile, the ProfileImagePath should contain path to the user profiles on your machine, such as C:\users\Christine If one or more of the profile has no profile image, then you have missing profiles. To work around this, delete the profile in question (Caution: The registry contains critical settings that are necessary for your system to function properly. Take extra caution while making changes) First, export the ProfileList key for safekeeping. (Right click on the key, choose “Export”, and save it to the desktop.) Right click on the profile in question, choose delete. Try backup again. This does not work for me. Anyone have any idea what is going on here?

  Read the article

• Fedora 13 - No module named yum

  - by drozzy

  This is driving me bananas! After a recent update in Fedora 13 64bit, my yum is gone: $> yum update There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named yum Please install a package which provides this module, or verify that the module is installed correctly. I tried looking for an RPM yum package - to install yum. I went to the Fedora site: http://fedoraproject.org/wiki/Tools/yum Call me blind but I cannot find it anywhere on that page! Most of the solutions suggest repairing yum... with yum! But I don't have yum? Yum yum yum? :< Any help? Here are some outputs for rpm commands: $> rpm -ql python | grep "site-packages$" /usr/lib/python2.6/site-packages /usr/lib64/python2.6/site-packages $> rpm -ql yum | grep "site-packages/yum$" /usr/lib/python2.6/site-packages/yum

  Read the article

• IIS 6.0 Application pool crash

  - by David

  One application pool on one of our webservers crashed and we found this in the Eventlog, where can we find more information about it? Event Type: Error Event Source: W3SVC Event Category: None Event ID: 1101 Date: 11/23/2009 Time: 10:57:55 AM User: N/A Computer: ID-WEB Description: The World Wide Web Publishing Service failed to create app pool 'Global'. The data field contains the error number. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: b7 00 07 80 ·..? Attempting to manually start the application pool gives the following in the event log: Event Type: Error Event Source: W3SVC Event Category: None Event ID: 1107 Date: 11/23/2009 Time: 3:53:13 PM User: N/A Computer: ID-WEB Description: The World Wide Web Publishing Service failed to modify app pool 'Global'. The data field contains the error number. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 05 40 00 80 .@.? We are running IIS 6.0 on a Windows server 2003 R2, 32bits.

  Read the article

• I need a piece software to use with my HP F4280 scanner.

  - by D Connors

  So, I got this printer/scanner about a year ago, and I'm really happy with it. The only thing is that I never really liked the HP scanning software that came with it. A few months ago I reformatted and reinstalled windows 7. Then, once I plugged in the printer, I noticed that windows recognized it automatically, and offered to install all the drivers by itself. So instead of manually installing the driver that came in the CD, I simply let windows automatically install it from its servers, and so far it's great. Instead of HP's scanning software (that really wasn't pleasing me), I got a very simplified interface that is more than enough for my ocasional scanning habits. Until today. Today I had to scan a bunch of old pictures for my father. And that simple interface felt like it was lacking quite a few features to make this repetitive task a little easier. And that's why I'm now looking for a good software to use for scanning. By "good" I mean anything well thought out, and specially anything that will make my life easier when repetitive-scanning. It doesn't need to have professional tweaking options, but having them is not a problem either. You guys got anything?

  Read the article

• Windows XP SP3 Keyboard stops working

  - by Kevin K

  Here's the strangest thing I have yet to see in 20+ yrs of computer repairs. My in-laws Windowsx XP SP3 has stopped recognizing keyboards. The keyboards work fine in the BIOS, during the boot select process to boot normally, etc. but once Windows comes up it will not recognize any USB keyboard. The USB mouse works fine, have tried different USB ports, different keyboards, etc. nothing works. I can log into the machine via VNC and use the remote keyboard just fine, but not connected locally. Tried a system restore, it says nothing changed. I am about to just re-install Windoze at this point, except I am afraid it will happen again. I have googled for this and it is not unheard of, but I have not found any solution other than nuking it. Anyone have any ideas? I have re-installed the USB drivers for the M/B. Gone into devices and deleted them for a re-install, etc. Keyboard works off a Linux live boot CD, and in the BIOS setup so it is not a hardware issue, and I have tried a few keyboards all of which I know are good and work fine on other systems.

  Read the article

• Toshiba Portege M400 screen rotation not working under Windows 7 x64

  - by Christi

  I have installed Windows 7 on my Toshiba Portege M400. This in itself was relatively tricky.* However, the button utilities aren't quite working for me. One of the buttons tries to launch the Toshiba Assist program, which doesn't appear to be available under Windows 7 for the M400, but this I can live without. More important is that the screen won't rotate as it is supposed to when you hold the "cancel" (X in a circle) button on the bezel. The PC is set to run "C:\Program Files (x860\Toshiba\Toshiba Rotation Utility\phtrot.exe". There is a "trot.exe" file in the same directory (the former appears to be to cause slightly different behaviour when rotation is done by press and hold). Neither of these programs rotates the screen either by using the buttons or from the command line. The screen is rotating normally when switching from tablet to laptop mode, so there does not appear to be an inherent problem with rotation. I'd just like to be able to use the buttons on the side of the screen to change the screen orientation. Windows XP used to have a "setrot" utility to do this, but that seems to have gone in Windows 7 Thanks for your help. *Just in case anyone comes looking for how to do this, you need to extract driver files from http://cdgenp01.csd.toshiba.com/content/support/downloads/util_raid_os2007252a.exe, which does not seem to be listed among the available files for the m400. This executable contains the SATA interface drivers that will need to be loaded by the installer before it can see your hard disk drive. It needs to be unpacked and the files copied to a USB key which they can then be loaded from in the install process. The utilities etc. for installation post windows install are all available from the Toshiba USA support website.

  Read the article

• Move sendmail from Fedora 1 to a different server ( fedora 12)

  - by tanieboy4u

  We have a sendmail server that also works as DHCP, DNS, and a gateway to our ISP. It has three network interfaces, one for our ISP ( static IP) and the other two is for LANS on different subnet. The hardware is quite old and we've been experiencing downtime due to hardware failures, so we have decided to upgrade the hardware and while at it upgrade the linux OS to Fedora 12. Were trying to do this with minimal downtime. We are planning to take these steps. Install New OS (Fedora 12) on the new server with 3 network interfaces. Install DHCP, BIND, Sendmail, SpamAssassin, MailScanner, Dovecot, Squirrelmail on the new server. Transfer settings from the old server to the new server. ( This is the hardest part that we know). For DHCP and DNS, we can just copy the dhcp leases and conf file and everything should work right? How do we go about moving the users/email accounts from the old server to the new one? Thanks for all your help!

  Read the article

• MSSQL 2000 installation error: Setup failed to configure the server. Refer to the server error logs.

  - by kaneuniversal

  I'm trying to install MSSQL 2000 on a virtual Windows 2003 instance. However, every time I run the install program, it fails to start the service. This is the error log: 21:46:50 C:\Program Files\Microsoft SQL Server\80\Tools\Binn\cnfgsvr.exe -F "C:\WINDOWS\sqlstp.log" -I MSSQLSERVER -V 1 -M 0 -Q "SQL_Latin1_General_CP1_CI_AS" -H 131408 -U sa -P ############################################################################### Starting Service ... SQL_Latin1_General_CP1_CI_AS -m -Q -T4022 -T3659 Connecting to Server ... driver={sql server};server=xxxxxxxxxx;UID=sa;PWD=;database=master [Microsoft][ODBC SQL Server Driver]Timeout expired driver={sql server};server=xxxxxxxxxx;UID=sa;PWD=;database=master [Microsoft][ODBC SQL Server Driver]Timeout expired driver={sql server};server=xxxxxxxxxx;UID=sa;PWD=;database=master [Microsoft][ODBC SQL Server Driver]Timeout expired SQL Server configuration failed. ############################################################################### 21:49:34 Process Exit Code: (-1) 22:19:04 Setup failed to configure the server. Refer to the server error logs and C:\WINDOWS\sqlstp.log for more information. 22:19:04 Action CleanUpInstall: 22:19:04 C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\SqlSetup\Bin\scm.exe -Silent 1 -Action 4 -Service SQLSERVERAGENT 22:19:05 Process Exit Code: (1060) The specified service does not exist as an installed service. 22:19:05 C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\1\SqlSetup\Bin\scm.exe -Silent 1 -Action 4 -Service MSSQLSERVER 22:19:05 Process Exit Code: (0) 22:19:05 StatsGenerate returned: 2 22:19:05 StatsGenerate (0x0,0x1,0xf00000,0x200,1033,303,0x0,0x1,0,0,0 22:19:05 StatsGenerate -1,Administrator) 22:19:05 Installation Failed. Has anyone had this problem? Any ideas about how to fix it? Thanks very much, Michael

  Read the article

• Troubles installing/starting Redis via Resque

  - by Craig Flannagan

  Trying to complete instructions for Resque/Redis installation here: https://github.com/defunkt/resque/blob/master/README.markdown Am stuck at where I'm trying to start up Redis via Resque at the following command: Craig:/usr/local/src/resque$ rake redis:start (in /usr/local/src/resque) Detach with Ctrl+\ Re-attach with rake redis:attach ../../bin/dtach -A /tmp/redis.dtach ../../bin/redis-server ../../../etc/redis.conf rake aborted! Command failed with status (127): [../../bin/dtach -A /tmp/redis.dtach ../../...] (See full trace by running task with --trace) Rerunning with --trace (showing only part of trace): Craig:/usr/local/src/resque$ rake redis:start --trace (in /usr/local/src/resque) ** Invoke redis:start (first_time) ** Execute redis:start Detach with Ctrl+\ Re-attach with rake redis:attach ../../bin/dtach -A /tmp/redis.dtach ../../bin/redis-server ../../../etc/redis.conf rake aborted! Command failed with status (127): [../../bin/dtach -A /tmp/redis.dtach ../../...] /Users/craigflannagan/.rvm/gems/ruby-1.9.2-head@foo/gems/rake-0.8.7/lib/rake.rb:995:in `block in sh' Not sure what is wrong here - by the way, when I did those instructions $ git clone git://github.com/defunkt/resque.git $ cd resque $ PREFIX=<your_prefix> rake redis:install dtach:install $ rake redis:start I wasn't sure whether or not I was supposed to be doing #1 from within the Rails project, or if I was supposed to have the git clone create a new folder outside the Rails project (in this case, I chose to have folder created outside the project).

  Read the article

• Web based KVM management for Ubuntu

  - by Tim

  Hey all, We've got a single Ubuntu 9.10 root server on which we want to run multiple KVM virtual machines. To administer these virtual machines I'd like a web based KVM management tool, but I don't know which one to choose from the list of tools mentioned on linux-kvm.org. I've used virsh & virt-manager on my desktop, but would like a web interface for the server. I tested ConVirt on my desktop, but it failed to pickup KVM machines from virsh / virt-manager, and I could not get KVM virtual machine import to work (only Xen). oVirt looks good, but I can't find out if and how I can install it on Ubuntu 9.10.. (And I'd really rather not waste another few days on testing stuff that might not work in the end.) Can anyone recommend any good web based KVM management tools that are easy to install on Ubuntu 9.10? I'm looking for something that will also allow me to run other services like apache and postgresql besides hosting virtual machines, so preferably fairly lightweight & no dedicated OS installs. We don't need any professional clustering / migration or anything, just something that will let us create, start, inspect, administer & stop virtual machines from a web page. Best regards, Tim

  Read the article

< Previous Page | 697 698 699 700 701 702 703 704 705 706 707 708  | Next Page >