mind mapping software - Page 701

3 Day Level 400 SQL Tuning Workshop 15 March in London, early bird and referral offer

- by sqlworkshops

I want to inform you that we have organized the "3 Day Level 400 Microsoft SQL Server 2008 and SQL Server 2005 Performance Monitoring & Tuning Hands-on Workshop" in London, United Kingdom during March 15-17, 2011.This is a truly level 400 hands-on workshop and you can find the Agenda, Prerequisite, Goal of the Workshop and Registration information at www.sqlworkshops.com/ruk. Charges are GBP 1800 (VAT excl.). Early bird discount of GBP 125 until 18 February. We are also introducing a new referral plan. If you refer someone who participates in the workshop you will receive an Amazon gift voucher for GBP 125.Feedback from one of the participants who attended our November London workshop:Andrew, Senior SQL Server DBA from UBS, UK, www.ubs.com, November 26, 2010:Rating: In a scale of 1 to 5 please rate each item below (1=Poor & 5=Excellent) Overall I was satisfied with the workshop 5 Instructor maintained the focus of the course 5 Mix of theory and practice was appropriate 5 Instructor answered the questions asked 5 The training facility met the requirement 5 How confident are you with SQL Server 2008 performance tuning 5 Additional comments from Andrew: The course was expertly delivered and backed up with practical examples. At the end of the course I felt my knowledge of SQL Server had been greatly enhanced and was eager to share with my colleagues. I felt there was one prerequisite missing from the course description, an open mind since the course changed some of my core product beliefs. For Additional workshop feedbacks refer to: www.sqlworkshops.com/feedbacks.I will be delivering the Level 300-400 1 Day Microsoft SQL Server 2008 Performance Monitoring and Tuning Seminar at Istanbul and Ankara, Turkey during March. This event is organized by Microsoft Turkey, let me know if you are in Turkey and would like to attend.During September 2010 I delivered this Level 300-400 1 Day Microsoft SQL Server 2008 Performance Monitoring and Tuning Seminar in Zurich, Switzerland organized by Microsoft Switzerland and the feedback was 4.85 out of 5, there were about 100 participants. During November 2010 when I delivered seminar in Lisbon, Portugal organized by Microsoft Portugal, the feedback was 8.30 out of 9, there were 130 participants.Our Mission: Empower customers to fully realize the Performance potential of Microsoft SQL Server without increasing the total cost of ownership (TCO) and achieve high customer satisfaction in every consulting engagement and workshop delivery.Our Business Plan: Provide useful content in webcasts, articles and seminars to get visibility for consulting engagements and workshop delivery opportunity. Help us by forwarding this email to your SQL Server friends and colleagues.Looking forwardR Meyyappan & Team @ www.SQLWorkshops.comLinkedIn: http://at.linkedin.com/in/rmeyyappan

Read the article

Language Club – Battle of the Dynamic Languages

- by Ben Griswold

After dedicating the last eight weeks to learning Ruby, it’s time to move onto another language. I really dig Ruby. I really enjoy its dynamism and expressiveness and always-openness and it’s been the highlight of our coding club for me so far. But that’s just my take on the language. I know a lot of coders who’s stomachs turn with the mere thought of Ruby. They say it’s Ruby’s openness which has them feeling uneasy. I’d say “write a bunch of tests and get over it,” but I figure there must be more to it than always open classes and possible method collisions. Yes, there’s something else to it alright. The folks who didn’t fall head over heals for Ruby are already in love with Python. You might remember that Python was the first language we tackled in our coding club. My time with Python was okay but it didn’t feel as natural to me as Ruby. But let’s say we started with Ruby and then moved onto Python. Would I see Python in a different light right now. Might I even prefer Python over Ruby? I suppose it’s possible but it’s pretty tough to test that theory – unless we visit Python for a second time. That’s right. The language club is going to focus on Python again and in my attempt to learn Python – yet again – in the open, I’ll be posting my solutions here just as I did for Ruby. We don’t always have second chances so I going about this relearning with two primary goals in mind: First, I’m going to use IronPython and the IronPython tools which provide a Python code editor, a file-based project system, and an interactive Python interpreter, all inside Visual Studio 2010. As a note, the IronPython tools are now part of the main IronPython installer which is Version 2.7 Alpha 1 (not the latest stable version, 2.6.1) and I’d be crazy not to use them. Second, I’d like to make sure I’m still learning Python without a complete MS skew so I’m going to run my code through Eclipse using the PyDev plugin as well. Heck, I might use IDLE too. I already have this setup on my machine so it’s no big deal. Okay, that’s it for now. I worked on the first ten Euler problems last night and the solutions will be posted shortly. Wish me luck.

Read the article

Going for Gold

- by Simple-Talk Editorial Team

There was a spring in the step of some members of our development teams here at Red Gate, on hearing that on five gold awards at 2012′s SQL Mag Community and Editors Choice Awards. And why not? It’s a nice recognition that their efforts were appreciated by many in the SQL Server community. The team at Simple-Talk don’t tend to spring, but even we felt a twinge of pride in the fact that SQL Scripts Manager received Gold for Editor’s Choice in the Best Free Tools category. The tool began life as a “Down Tools” project and is one that we’ve supported and championed in various articles on Simple-talk.com. Over a Cambridge Bitter in the Waggon and Horses, we’ve often reflected on how nice it would be to nominate our own awards. Of course, we’d have to avoid nominating Red Gate tools in each category, even the free ones, for fear of seeming biased, but we could still award other people’s free tools, couldn’t we? So allow us to set the stage for the annual Simple-Talk Community Tool awards… Onto the platform we shuffle, to applause from the audience; Chris in immaculate tuxedo, Alice in stunning evening gown, Dave and Tony looking vaguely uncomfortable, Andrew somehow distracted, as if his mind is elsewhere. Tony strides up to the lectern, and coughs lightly…”In the free-tool category we have the three nominations, and they are…” (rustle of the envelope opening) Ola Hallengren’s SQL Server Maintenance Solution (applause) Adam Machanic’s WhoIsActive (cheers, more applause) Brent Ozar’s sp_Blitz (much clapping) “Before we declare the winner, I’d like to say a few words in recognition of a grand tradition in a SQL Server community that continues to offer its members a steady supply of excellent, free tools. It hammers home the fundamental principle that a tool should solve a single, pressing and frustrating problem, but you should only ever build your own solution to that problem if you are certain that you cannot buy it, or that someone has not already provided it free. We have only three finalists tonight, but I feel compelled to mention a few other tools that we also use and appreciate, such as Microsoft’s Logparser, Open source Curl, Microsoft’s TableDiff.exe, Performance Analysis of Logs (PAL) Tool, SQL Server Cache Manager and SQLPSX.” “And now I’ll hand over to Alice to announce the winner.” Alice strides over to the microphone, tearing open the envelope. “The winner,” she pauses for dramatic effect “… is …Ola Hallengren’s SQL Server Maintenance Solution!” Queue much applause and consumption of champagne. Did we get it wrong? What free tool would you nominate? Let us know! Cheers, Simple-Talk Editorial Team (Andrew, Alice, Chris, Dave, Tony)

Read the article

SQL SERVER – Maximize Database Performance with DB Optimizer – SQL in Sixty Seconds #054

- by Pinal Dave

Performance tuning is an interesting concept and everybody evaluates it differently. Every developer and DBA have different opinion about how one can do performance tuning. I personally believe performance tuning is a three step process Understanding the Query Identifying the Bottleneck Implementing the Fix While, we are working with large database application and it suddenly starts to slow down. We are all under stress about how we can get back the database back to normal speed. Most of the time we do not have enough time to do deep analysis of what is going wrong as well what will fix the problem. Our primary goal at that time is to just fix the database problem as fast as we can. However, here is one very important thing which we need to keep in our mind is that when we do quick fix, it should not create any further issue with other parts of the system. When time is essence and we want to do deep analysis of our system to give us the best solution we often tend to make mistakes. Sometimes we make mistakes as we do not have proper time to analysis the entire system. Here is what I do when I face such a situation – I take the help of DB Optimizer. It is a fantastic tool and does superlative performance tuning of the system. Everytime when I talk about performance tuning tool, the initial reaction of the people is that they do not want to try this as they believe it requires lots of the learning of the tool before they use it. It is absolutely not true with the case of the DB optimizer. It is a very easy to use and self intuitive tool. Once can get going with the product, in no time. Here is a quick video I have build where I demonstrate how we can identify what index is missing for query and how we can quickly create the index. Entire three steps of the query tuning are completed in less than 60 seconds. If you are into performance tuning and query optimization you should download DB Optimizer and give it a go. Let us see the same concept in following SQL in Sixty Seconds Video: You can Download DB Optimizer and reproduce the same Sixty Seconds experience. Related Tips in SQL in Sixty Seconds: Performance Tuning – Part 1 of 2 – Getting Started and Configuration Performance Tuning – Part 2 of 2 – Analysis, Detection, Tuning and Optimizing What would you like to see in the next SQL in Sixty Seconds video? Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL in Sixty Seconds, SQL Interview Questions and Answers, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Identity

Read the article

Is Nick Clegg a man or a mouse?

- by BizTalk Visionary

Well we got the hung election so many of us wanted! I believe it really is time for electoral change. Why? Consider: the ConMen under Cameroon have polled 36% of the great British voting public – well those that got to vote!! That means 64% of us don’t want him as PM. So what gives him the right to govern? Well an ancient voting system ideal for two party politics. But for the last 30 years we’ve had multi-party politics and going forward we may see 4 or 5 parties stepping up. We have to set in place a system that makes this work! So what does that mean today: Nick has a golden chance to push forward the case and in fact the absolute right for the change. He needs to keep this in mind when he discusses coalition with both Labour and the ConMen. So the mouse approach: Decides it is only fair to side with the ‘biggest’ vote and team up with the ConMen. Chances of electoral change? Big fat zero. Chance of achieving any of his other targets. Big fat zero. Why? Simple (as the Meer Kat would say). Cameroon needs to become PM by hook or crook. Once PM he holds the whip hand. Labour will dump Brown and head off into Leadership race land, Clegg will be knocking on number 10, having meaningless meetings and seeing no reward. Finally while Labour is at 6‘s and 7’s the ‘new’ PM will call a new election, gain the majority they need and dump luckless Nick!! So the man approach: Team up with Labour. As one of the conditions – Brown to go. Run referendum for PR. Get PR through then force Labour to have new election under PR. Nick now hero and should be in a much better place following a PR election!! The man bit is standing up to the media attack for supporting Labour. Come Nick – be a man for a better Britain!!

Read the article

Is Nick Clegg a man or a mouse?

- by BizTalk Visionary

Well we got the hung election so many of us wanted! I believe it really is time for electoral change. Why? Consider: the ConMen under Cameroon have polled 36% of the great British voting public – well those that got to vote!! That means 64% of us don’t want him as PM. So what gives him the right to govern? Well an ancient voting system ideal for two party politics. But for the last 30 years we’ve had multi-party politics and going forward we may see 4 or 5 parties stepping up. We have to set in place a system that makes this work! So what does that mean today: Nick has a golden chance to push forward the case and in fact the absolute right for the change. He needs to keep this in mind when he discusses coalition with both Labour and the ConMen. So the mouse approach: Decides it is only fair to side with the ‘biggest’ vote and team up with the ConMen. Chances of electoral change? Big fat zero. Chance of achieving any of his other targets. Big fat zero. Why? Simple (as the Meer Kat would say). Cameroon needs to become PM by hook or crook. Once PM he holds the whip hand. Labour will dump Brown and head off into Leadership race land, Glegg will be knocking on number 10, having meaningless meetings and seeing no reward. Finally while Labour is at 6‘s and 7’s the ‘new’ PM will call a new election, gain the majority they need and dump luckless Nick!! So the man approach: Team up with Labour. As one of the conditions – Brown to go. Run referendum for PR. Get PR through then force Labour to have new election under PR. Nick now hero and should be in a much better place following a PR election!! The man bit is standing up to the media attack for supporting Labour. Come Nick – be a man for a better Britain!!

Read the article

OSI Model

- by kaleidoscope

The Open System Interconnection Reference Model (OSI Reference Model or OSI Model) is an abstract description for layered communications and computer network protocol design. In its most basic form, it divides network architecture into seven layers which, from top to bottom, are the Application, Presentation, Session, Transport, Network, Data Link, and Physical Layers. It is therefore often referred to as the OSI Seven Layer Model. A layer is a collection of conceptually similar functions that provide services to the layer above it and receives service from the layer below it. Description of OSI layers: Layer 1: Physical Layer · Defines the electrical and physical specifications for devices. In particular, it defines the relationship between a device and a physical medium. · Establishment and termination of a connection to a communications medium. · Participation in the process whereby the communication resources are effectively shared among multiple users. · Modulation or conversion between the representation of digital data in user equipment and the corresponding signals transmitted over a communications channel. Layer 2: Data Link Layer · Provides the functional and procedural means to transfer data between network entities. · Detect and possibly correct errors that may occur in the Physical Layer. The error check is performed using Frame Check Sequence (FCS). · Addresses is then sought to see if it needs to process the rest of the frame itself or whether to pass it on to another host. · The Layer is divided into two sub layers: The Media Access Control (MAC) layer and the Logical Link Control (LLC) layer. · MAC sub layer controls how a computer on the network gains access to the data and permission to transmit it. · LLC layer controls frame synchronization, flow control and error checking. Layer 3: Network Layer · Provides the functional and procedural means of transferring variable length data sequences from a source to a destination via one or more networks. · Performs network routing functions, and might also perform fragmentation and reassembly, and report delivery errors. · Network Layer Routers operate at this layer—sending data throughout the extended network and making the Internet possible. Layer 4: Transport Layer · Provides transparent transfer of data between end users, providing reliable data transfer services to the upper layers. · Controls the reliability of a given link through flow control, segmentation/de-segmentation, and error control. · Transport Layer can keep track of the segments and retransmit those that fail. Layer 5: Session Layer · Controls the dialogues (connections) between computers. · Establishes, manages and terminates the connections between the local and remote application. · Provides for full-duplex, half-duplex, or simplex operation, and establishes checkpointing, adjournment, termination, and restart procedures. · Implemented explicitly in application environments that use remote procedure calls. Layer 6: Presentation Layer · Establishes a context between Application Layer entities, in which the higher-layer entities can use different syntax and semantics, as long as the presentation service understands both and the mapping between them. The presentation service data units are then encapsulated into Session Protocol data units, and moved down the stack. · Provides independence from differences in data representation (e.g., encryption) by translating from application to network format, and vice versa. The presentation layer works to transform data into the form that the application layer can accept. This layer formats and encrypts data to be sent across a network, providing freedom from compatibility problems. It is sometimes called the syntax layer. Layer 7: Application Layer · This layer interacts with software applications that implement a communicating component. · Identifies communication partners, determines resource availability, and synchronizes communication. o When identifying communication partners, the application layer determines the identity and availability of communication partners for an application with data to transmit. o When determining resource availability, the application layer must decide whether sufficient network or the requested communication exists. o In synchronizing communication, all communication between applications requires cooperation that is managed by the application layer. Technorati Tags: Kunal,OSI,Networking

Read the article

Cloud Application Management for Platforms

- by user756764

Today Oracle, along with CloudBees, Cloudsoft, Huawei, Rackspace, Red Hat, and Software AG, published the Cloud Application Management for Platforms (CAMP) specification. This spec deals with application management in the context of PaaS. It defines a model (consisting of a set resources and their relationships), a REST-based API for manipulating that model, and a packaging format for getting applications (and their attendant metadata) into and out of the platform. My colleague, Mark Carlson, has already provided an excellent writeup on the spec here. The following, additional points bear emphasizing: CAMP is language, framework and platform neutral; it should be equally applicable to the task of deploying and managing Ruby on Rails applications as Java/Spring applications (as Node.js applications, etc.) CAMP only covers the interactions between a Cloud Consumer and a Cloud Provider (using the definitions of these terms provided in the NIST Cloud Computing Reference Architecture). The internal APIs used by the Cloud Provider to, for example, deploy additional platform services (e.g. a new message queuing service) are out of CAMP's scope. CAMP supports the management of the entire lifecycle of the application (e.g. start/stop, suspend/resume, etc.) not just the deployment of the components that make up the application. Complexity is the antithesis of interoperability. One of CAMP's goals is to be as broadly interoperable as possible. To this end, the authors of CAMP tried to "make things as simple as possible, but no simpler". For example, JSON is the only serialization format used in the spec (although Providers can extend this to support additional serialization formats such as XML). It remains to be seen whether we can preserve this simplicity as the spec is processed by OASIS. So far, those who have indicated an interest in collaborating on the spec seem to be of a like mind with regards to the need for simplicity. The flip side to simplicity is the knowledge that you undoubtedly missed something that is important to someone. To make up for this, CAMP is designed to be extensible. The idea is to ship what we know will work, allow implementers to extend the spec, then re-factor the spec to incorporate the most popular extensions. Anyone interested in this effort, particularly those of you using PaaS-level services, is encouraged to join the forthcoming OASIS TC. As you may have noticed, CAMP is a bit of a departure from some of the more monolithic management standards that have preceded it. The idea is to develop simple, discrete standards targeted to address specific interoperability and portability problems and tie these standards together with common patterns based on REST and HATEOAS. I'm excited to see how this idea plays out.

Read the article

SQL SERVER – How to Compare the Schema of Two Databases with Schema Compare

- by Pinal Dave

Earlier I wrote about An Efficiency Tool to Compare and Synchronize SQL Server Databases and it was very much well received. Since the blog post I have received quite a many question that just like data how we can also compare schema and synchronize it. If you think about comparing the schema manually, it is almost impossible to do so. Table Schema has been just one of the concept but if you really want the all the schema of the database (triggers, views, stored procedure and everything else) it is just impossible task. If you are developer or database administrator who works in the production environment than you know that there are so many different occasions when we have to compare schema of the database. Before deploying any changes to the production server, I personally like to make note of the every single schema change and document it so in case of any issue , I can always go back and refer my documentation. As discussed earlier it is absolutely impossible to do this task without the help of third party tools. I personally use Devart Schema Compare for this task. This is an extremely easy tool. Let us see how it works. First I have two different databases – a) AdventureWorks2012 and b) AdventureWorks2012-V1. There are total three changes between these databases. Here is the list of the same. One of the table has additional column One of the table have new index One of the stored procedure is changed Now let see how dbForge Schema Compare works in this scenario. First open dbForge Schema Compare studio. Click on New Schema Comparison. It will bring you to following screen where we have to configure the database needed to configure. I have selected AdventureWorks2012 and AdventureWorks-V1 databases. In the next screen we can verify various options but for this demonstration we will keep it as it is. We will not change anything in schema mapping screen as in our case it is not required but generically if you are comparing across schema you may need this. This is the most important screen as on this screen we select which kind of object we want to compare. You can see the options which are available to select. The screen lets you select the objects from SQL Server 2000 to SQL Server 2012. Once you click on compare in previous screen it will bring you to this screen, which will essentially display the comparative difference between two of the databases which we had selected in earlier screen. As mentioned above there are three different changes in the database and the same has been listed over here. Two of the changes belongs to the tables and one changes belong to the procedure. Let us click each of them one by one to see what is the difference between them. In very first option we can see that there is an additional column in another database which did not exist earlier. In this example we can see that AdventureWorks2012 database have an additional index. Following example is very interesting as in this case, we have changed the definition of the stored procedure and the result pan contains the same. dbForget Schema Compare very effectively identify the changes in schema and lists them neatly to developers. Here is one more screen. This software not only compares the schema but also provides the options to update or drop them as per the choice. I think this is brilliant option. Well, I have been using schema compare for quite a while and have found it very useful. Here are few of the things which dbForge Schema Compare can do for developers and DBAs. Compare and synchronize SQL Server database schemas Compare schemas of live database and SQL Server backup Generate comparison reports in Excel and HTML formats Eliminate mistakes in schema changes propagation across environments Track production database changes and customizations Automate migration of schema changes using command line interface I suggest that you try out dbForge Schema Compare and let me know what you think of this product. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL

Read the article

Challenges and Opportunities to Drive Change in the Healthcare System Explored at America’s Health Insurance Plans Exchange Conference and Institute 2013

- by elaine blog

The program theme at the June America’s Health Insurance Plans (AHIP) Exchange Conference and AHIP’s Institute 2013 was Transforming Our Health Care System: Navigating and Succeeding in the New Marketplace. Topics included care delivery transformation, innovation for a new healthcare eco system, Health Insurance Exchanges, the nexus of consumerism, retail and healthcare, driving value through improved operations and leveraging technology, data and innovation to transform care. Oracle participated as a sponsor of both conferences, signaling the significant investment and activity Oracle continues to make in helping health plans, providers and government agencies become more efficient and more relevant in the healthcare market place. AHIP is a national trade association representing the health insurance industry. AHIP’s members provide health and supplemental benefits to more than 200 million Americans through employer-sponsored coverage, the individual insurance market and public programs such as Medicare and Medicaid. AHIP advocates for public policies that expand access to affordable health care. Health plans are focusing on the Health Insurance Exchanges and the opportunities they offer to provide better access and higher quality healthcare. With the opportunities come operational challenges to implementation and innovative technology solutions to consider. At the Exchange Conference, Oracle hosted a breakfast symposium on “Strategies for Success: Driving Business Transformation in the Growing Health Insurance Exchange Market”. With Health Insurance Exchanges as catalysts for change, attendees learned about how to achieve integration within an Exchange and deploy new business strategies to support health reform initiatives. Discussion covered steps and processes to successfully establish and implement enrollment systems, quote to card activities, program pricing, claims billing, automated claims processing and new customer service tools. Piyush Pushkar, COO of Benefitalign, an Oracle partner that provides solutions to adopt innovative business models for retail, HIX, consumer-centric health plan and benefits administration, spoke on the state of the Exchanges in the U.S. and the activities health plans are engaged in to support individuals entering the healthcare system, including sales automation, member enrollment automation/portals and integration strategies with the Exchanges. The Oracle and Benefitalign partnership allows seamless integration between a health plan enrollment solution with the HIX individual market and allows for the health plan to customize and characterize the offerings available to the HIX that may or may not be available through other channels. This approach can benefit the health plan through separation of interests, but also because some state-run HIXs require such separation. Janice W. Young, Program Director, Payer IT Strategies, IDC Health Insights, reviewed a survey of health plans on their investment priorities for this last year as well as this year. She also identified the 2013-2015 strategies of go/get to market with front end and compliance investments; leveraging existing business processes and internal technologies; and establishing best practices. Of key interest to the audience was a reform era payer solutions platform overview mapping technologies to support the business operations. David Bonham of the Oracle Health Insurance organization moderated the panel and spoke on Oracle’s presence in healthcare and products for payers to help them drive efficiencies and gain a competitive advantage in an ever changing market. Oracle serves healthcare stakeholders with applications such as billing, rating and underwriting, analytics, CRM, enrollment, and products for processing of health insurance claims including pricing and benefits administration, as well as payment of providers through alternative, non-fee for service reimbursement methods. Oracle in Healthcare….Did you know? More than 80 healthcare payers run Oracle applications. More than 300 leading healthcare providers run Oracle applications. 10 out of the top 12 fortune Global 500 healthcare organizations run Oracle applications. For more information on Oracle solutions for healthcare payers, please visit oracle.com/insurance or these individual solution pages: Oracle Health Insurance Components Oracle Insurance Insbridge Rating and Underwriting Oracle Insurance Revenue Management and Billing Oracle Documaker Oracle Healthcare Oracle CRM Related Resources Webcast On Demand: Strategies for Success: Driving Business Transformation in the Growing Health Insurance Exchange Market Strategy Brief: Executing on the Individual Mandate: Opportunities and Challenges for Healthcare Payers White Paper: White paper: Navigating Alternative Provider Reimbursement Models of the Future Strategy Brief: Enterprise Rating Agility Improves Payer Response to Healthcare Reform Podcast: Technology Implications of Healthcare Reform Don’t forget to keep up with us year-round: Facebook: www.facebook.com/oracleinsurance Twitter: www.twitter.com/oracleinsurance YouTube: www.youtube.com/oracleinsurance

Read the article

Announcing the ASP.NET and Web Tools 2012.2 Release Candidate

- by ScottGu

This week the ASP.NET and Visual Web Developer teams delivered the Release Candidate of the ASP.NET and Web Tools 2012.2 update (formerly ASP.NET Fall 2012 Update BUILD Prerelease). This update extends the existing ASP.NET runtime and adds new web tooling to Visual Studio 2012. Whether you use Web Forms, MVC, Web API, or any other ASP.NET technology, there is something cool in this update for you. You can download and install the RC today: http://www.asp.net/vnext. Great ASP.NET Enhancements This update adds new ASP.NET templates and features, including: New ASP.NET MVC templates. Creating Facebook applications just became easier using the new Facebook Application template. In just a few easy steps you can create a Facebook application that gets data from the logged in user as well as integrates with their friends. A new Single Page Application template allows developers to build interactive client-side web apps using Knockout, jQuery, and ASP.NET Web API. Real-time communication support with ASP.NET SignalR. This enables you to easily take advantage of the new WebSocket support in .NET 4.5, while also automatically degrading to long-polling and other protocols for older clients. If you haven’t tried SignalR yet you should – it is awesome. New ASP.NET Web API functionality, including support for OData, integrated tracing, and automatically generating help page documentation for your API. New ASP.NET Friendly URL functionality. This new feature makes it very easy for Web Forms developers to generate cleaner looking URLs (without the .aspx extension). The Friendly URLs feature also makes it easier for developers to add mobile support to their applications with support for mobile .ASPX pages and supporting switching between desktop and mobile views. It can be used with existing ASP.NET v4.0 applications. Visual Studio 2012 Web publishing enhancements. Web site projects now have the same publish experience as web application projects (including to Windows Azure Web Sites), and you can selectively publish files, see the differences between local and remote files, and update local to remote files or vice versa. Visual Studio 2012 Page Inspector enhancements. JavaScript selection mapping is now supported, and you can CSS updates in real-time. Visual Studio 2012 editor support for Knockout IntelliSense and pasting JSON as a .NET class (which makes it even easier to consume Web APIs from others). Visual Studio 2012 Project Template updates, including the latest versions of jQuery, jQuery UI, jQuery Validation, Modernirz, Knockout and more… How it is delivered You can download and install an integrated setup that contains the above enhancements today from http://www.asp.net/vnext. The new runtime functionality is delivered to ASP.NET via additional NuGet packages. This means that installing this update does not make any changes to the existing ASP.NET binaries, and thus does not cause any compatibility issues with existing projects. New projects will contain the new functionality and existing projects can be updated with the new NuGet packages. Summary Web development is changing, and ASP.NET is rapidly delivering new capabilities to developers that help them take full advantage of new capabilities. The ASP.NET and Web Tools 2012.2 update installs in minutes without altering the current ASP.NET run time components. For a complete description see the Release Notes. Next week I plan to publish a tutorial showing how to build a cool Facebook application using the new Facebook template. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

10 steps to enable ‘Anonymous Access’ for your SharePoint 2010 site

- by KunaalKapoor

What’s Anonymous Access? Anonymous access to your SharePoint site enables all visitors to view your SharePoint site anonymously without having to log in. With this blog I’d like to go through an easy step wise procedure to enable/set up anonymous access. Before you actually enable anonymous access on the site, you’ll have to change some settings at the web app level. So let’s start with that: Prerequisite(s): 1. A hosted SharePoint 2010 farm/server. 2. An existing SharePoint site. I just thought I’d mention the above pre-reqs, since the steps mentioned below would’nt be valid or a different type of a site. Step 1: In Central Administration, under Application Management, click on the Manage web applications. Step 2: Now select the site you want to enable anonymous access and click on the Authentication Providers icon. Step 3: On the modal window click on the Default zone. Step 4: Now under the Edit Authentication section, check Enable anonymous access and click Save. This is basically to make the Anonymous Access authentication mechanism available at the web app level @ IIS. Now, web application will allow anonymous access to be set. 5. Going back to Web Application Management click on the Anonymous Policy icon. Step 6: Also before we proceed any further, under the Anonymous Access Restrictions (@ web app mgmt.) select your Zone and set the Permissions to None – No policy and click Save. Step 7: Now lets navigate to your top level site collection for the web application. Click the Site Actions > Site Settings. Under Users and Permissions click Site permissions. Step 8: Under Users and Permissions, click on Site Permissions. Step 9: Under the Edit tab, click on Anonymous Access. Step 10: Choose whether you want Anonymous users to have access to the entire Web site or to lists and libraries only, and then click on OK. You should now be able to see the view as below under your permissions Also keep in mind: If you are trying to access the site from a browser within the domain, then you’ll need to change some browser settings to see the after affects. Normally this is because the browsers (Internet Explorer) is set to log in automatically to intranet zone only , not sure if you have explicitly changed the zones and added it to trusted sites. If this is from a box within your domain please try to access the site by temporarily changing the Internet Explorer setting to Anonymous Logon on the zone that the site is added example "Intranet" and try . You will find the same settings by clicking on Tools > Internet Options > Security Tab.

Read the article

Chunking a List - .NET vs Python

- by Abhijeet Patel

Chunking a List As I mentioned last time, I'm knee deep in python these days. I come from a statically typed background so it's definitely a mental adjustment. List comprehensions is BIG in Python and having worked with a few of them I can see why. Let's say we need to chunk a list into sublists of a specified size. Here is how we'd do it in C# static class Extensions { public static IEnumerable<List<T>> Chunk<T>(this List<T> l, int chunkSize) { if (chunkSize <0) { throw new ArgumentException("chunkSize cannot be negative", "chunkSize"); } for (int i = 0; i < l.Count; i += chunkSize) { yield return new List<T>(l.Skip(i).Take(chunkSize)); } } } static void Main(string[] args) { var l = new List<string> { "a", "b", "c", "d", "e", "f","g" }; foreach (var list in l.Chunk(7)) { string str = list.Aggregate((s1, s2) => s1 + "," + s2); Console.WriteLine(str); } } A little wordy but still pretty concise thanks to LINQ.We skip the iteration number plus chunkSize elements and yield out a new List of chunkSize elements on each iteration. The python implementation is a bit more terse. def chunkIterable(iter, chunkSize): '''Chunks an iterable object into a list of the specified chunkSize ''' assert hasattr(iter, "__iter__"), "iter is not an iterable" for i in xrange(0, len(iter), chunkSize): yield iter[i:i + chunkSize] if __name__ == '__main__': l = ['a', 'b', 'c', 'd', 'e', 'f'] generator = chunkIterable(l,2) try: while(1): print generator.next() except StopIteration: pass xrange generates elements in the specified range taking in a seed and returning a generator. which can be used in a for loop(much like using a C# iterator in a foreach loop) Since chunkIterable has a yield statement, it turns this method into a generator as well. iter[i:i + chunkSize] essentially slices the list based on the current iteration index and chunksize and creates a new list that we yield out to the caller one at a time. A generator much like an iterator is a state machine and each subsequent call to it remembers the state at which the last call left off and resumes execution from that point. The caveat to keep in mind is that since variables are not explicitly typed we need to ensure that the object passed in is iterable using hasattr(iter, "__iter__").This way we can perform chunking on any object which is an "iterable", very similar to accepting an IEnumerable in the .NET land

Read the article

Open the SQL Server Error Log with PowerShell

- by BuckWoody

Using the Server Management Objects (SMO) library, you don’t even need to have the SQL Server 2008 PowerShell Provider to read the SQL Server Error Logs – in fact, you can use regular old everyday PowerShell. Keep in mind you will need the SMO libraries – which can be installed separately or by installing the Client Tools from the SQL Server install media. You could search for errors, store a result as a variable, or act on the returned values in some other way. Replace the Machine Name with your server and Instance Name with your instance, but leave the quotes, to make this work on your system: [reflection.assembly]::LoadWithPartialName("Microsoft.SqlServer.Smo") $machineName = "UNIVAC" $instanceName = "Production" $sqlServer = new-object ("Microsoft.SqlServer.Management.Smo.Server") "$machineName\$instanceName" $sqlServer.ReadErrorLog() Want to search for something specific, like the word “Error”? Replace the last line with this: $sqlServer.ReadErrorLog() | where {$_.Text -like "Error*"} Script Disclaimer, for people who need to be told this sort of thing: Never trust any script, including those that you find here, until you understand exactly what it does and how it will act on your systems. Always check the script on a test system or Virtual Machine, not a production system. Yes, there are always multiple ways to do things, and this script may not work in every situation, for everything. It’s just a script, people. All scripts on this site are performed by a professional stunt driver on a closed course. Your mileage may vary. Void where prohibited. Offer good for a limited time only. Keep out of reach of small children. Do not operate heavy machinery while using this script. If you experience blurry vision, indigestion or diarrhea during the operation of this script, see a physician immediately. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

SQLAuthority News – Presented at Bangalore DevCon August 4, 2012

- by pinaldave

Bangalore Devcon 2012 was a great fun. Earlier this month I was fortunate to be invited to present at Dev Con. The event was very well planned and had excellent response. There were more than 140 attendees at any time in the sessions. There were two tracks and both tracks were running parallel to each other in the Microsoft Bangalore building. The venue is fantastic and the enthusiasm of the community is impeccable. We had a total of 12 sessions during the day. I had decided to attend each session if I can. We have so many fantastic speakers and I did not want to miss any of the sessions. As sessions were running parallel, I attended every session for 30 minutes and switched to another session. I had fun doing this experiment as tit gave me a good idea about every session. I presented personally on the session of SQL Tips and Tricks for Web Developer. DBA is a very common word and every time when we say SQL Server – lots of people think of DBA in their mind, however, SQL Server is used by many developers as well. In this session I tried to cover a few of the simple concepts where developers must pay special attention while writing T-SQL code. Sometimes a very small mistake can be very fatal on performance in the future. Here are few of the photos of the event. Btw, the two sessions which clearly stand out were Vinod Kumar‘s session on Leadership and Lohith‘s session on Visual Studio Tips and Tricks. Additional Read: Following are the blog posts by community on the Bangalore DevCon Experience. I encourage you to read them all and leave a comment which one you liked the most. http://abhishekbhat.wordpress.com/2012/08/07/devcon-2012-experience/ http://praveenprajapati.wordpress.com/2012/08/07/devcon-2012-part-2/ http://tomsblogsspot.blogspot.in/2012/08/devcon-2012.html?view=classic https://manasdash.wordpress.com/2012/08/06/devcon-2012-by-bdotnet-4th-august-2012/ http://www.jagan-bhathri.com/2012/08/bangalore-developer-conference-2012-by.html Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

Read the article

DevExpress XAF, Behavior Driven Development (BDD), Domain Driven Development (DDD) and more–Introduction

- by Patrick Liekhus

OK. I admit it. I have been horrible at this blogging thing. However, I have made a commitment to get better at it so here goes. I have many crazy ideas when it comes to coding and how to make my processes better and now is the time to get them down on paper and get your feedback. Now, these ideas might not be nearly as wild and crazy as Charlie Sheen, but at least they help me get through my coding assignments. So let’s start by laying out the vision and objectives of this exercise. I have been trying to come up with the best set of tools, tips and practices so I can get a small team to be as productive as possible without burning out my resources. My thoughts tend to lean towards the coding practices first as this is what I have been doing for years. However, as one looks at the process as a whole, we need to remember to keep the users in mind. If we don’t have a user to accept our application, do we really have an application in the first place? I have been using a commercial framework from DevExpress called eXpress Application Framework (XAF) with their eXpress Persistent Objects (XPO) behind the scenes for a few years. We have had tremendous success with it and even implemented a code generation layer to save us some time. Now we want more!!! My goals here are to create a technical stack that employs as many UI’s as possible, while being true to the layers and documenting the process along the way. I will continue to have a series of these posts that will walk through each step as I work on it. Right now here is what I have planned: Defining the solution SCRUM/Agile Story Planning Overview of Architectural Plan Feature Driven Development Domain Driven Development Persistence Layer with XPO Windows UI with XAF/XPO Web UI with XAF/XPO OData Services Layer Windows Mobile UI Android UI iPhone UI Blackberry UI Excel UI Outlook UI Lessons Learned I will explain the solution that I plan to implement in the next post. Thanks again and let me know what you think.

Read the article

Gawker Passwords

- by Nick Harrison

There has been much news about the hack of the Gawker web sites. There has even been an analysis of the common passwords found. This list is embarrassing in many ways. The most common password was "123456". The second most common password was "password". Much has also been written providing advice on how to create good passwords. This article provides some interesting advice, none of which should be taken. Anyone reading my blog, probably already knows the importance of strong passwords, so I am not going to reiterate the reasons here. My target audience is more the folks defining password complexity requirements. A user cannot come up with a strong password, if we have complexity requirements that don't make sense. With that in mind, here are a few guidelines: Long Passwords Insist on long passwords. In some cases, you may need to change to allow a long password. I have seen many places that cap passwords at 8 characters. Passwords need to be at least 8 characters minimal. Consider how much stronger the passwords would be if you double the length. Passwords that are 15-20 characters will be that much harder to crack. There is no need to have limit passwords to 8 characters. Don't Require Special Characters Many complexity rules will require that your password include a capital letter, a lower case letter, a number, and one of the "special" characters, the shits above the number keys. The problem with such rules is that the resulting passwords are harder to remember. It also means that you will have a smaller set of characters in the resulting passwords. If you must include one of the 9 digits and one of the 9 "special" characters, then you have dramatically reduced the character set that will make up the final password. Two characters will be one of 10 possible values instead of one of 70. Two additional characters will be one of 26 possible characters instead of a 70 character potential character set. If you limit passwords to 8 characters, you are left with only 7 characters having the full set of 70 potential values. With these character restrictions in place, there are 1.6 x1012 possible passwords. Without these special character restrictions, but allowing numbers and special characters, you get a total of 5.76x1014 possible passwords. Even if you only allowed upper and lower case characters, you will still have 2.18X1014 passwords. You can do the math any number of ways, requiring special characters will always weaken passwords. Now imagine the number of passwords when you require more than 8 characters. If you are responsible for defining complexity rules, I urge you to take these guidelines into account. What other guidelines do you follow?

Read the article

Recruitment Drive - Things Don't Always Go As Planned - Stay Flexible by Kalyan Neelagiri

- by david.talamelli

I am one of the Recruiters for Oracle and work in our India Recruitment Team. When we are hiring for multiple positions we often hold Recruitment Events to interview a large number of people as effectively as possible. These Events are often held on the weekend as many people are not free to attend an all day event during the working week. Just recently during a recruitment campaign we were running I was tasked to set up a Recruitment Event for some roles we were hiring for. I have set up and run weekend recruitment events in the past which have all run smoothly. However, this time arranging this recruitment event was quite a challenge for me. The planned event was taking place on a Saturday. I had almost sent out the confirmed scheduled list of candidates to the respective hiring team on Friday and was on track for the event to take place, but unfortunately there was breaking news in the media that there was a strike called in the city because of some political agitations and protests taking place on the event day. The hiring manager had rushed to me asking for my thoughts and ideas. I was in two minds on what to do. One on hand I was not ready to cancel the event because of all the work that so many people had put into getting this prepared and also I did not want to reschedule the event at the last minute if I did not need to. On the other hand I understood it may be best to reschedule the event as people may not be able to attend based on the political protests taking place on the day. In the end I decided to gather and check for other options because this might cause confusion and a problem for the scheduled candidates to drive in to the venue. So we had concluded to reschedule our event plans and moved the event to the next week. The good news is that we successfully executed this recruitment drive the following Saturday. We were glad that 100% of the candidates we able to make it to the new interview date and despite all the agitations in the city we were successful in hiring people for all the roles we had open. Things do not always go as planned. The best laid plans can sometimes be for nought based on external factors outside of our control. What this experience has taught me is that rather than focus on the negatives when you are thrown a curveball the best approach is to stay flexible and focus on finding ways to reach your outcome. Your plans may need to change but you can still achieve the results you are after if you have the right mind set.

Read the article

CodeStock 2012 Review: Michael Eaton( @mjeaton ) - 3 Simple Things for Increased Productivity

3 Simple Things for Increased ProductivitySpeaker: Michael EatonTwitter: @mjeatonBlog: http://mjeaton.net/blog This was the first time I had seen Michael Eaton speak but have hear a lot of really good things about his speaking abilities. Needless to say I was really looking forward to his session. He basically addressed the topic of distractions and how they can decrease or increase your productivity as a developer. He makes the case that in order to become more productive you must block/limit all distractions. For example, he covered his top distractions as a developer. Top Distractions Social Media(Twitter, Reddit, Facebook) Wiki sites Phone Email Video Games Coworkers, Friends, Family Michael stated that he uses various types of music to help him block out these distractions in order for him to get into his coding zone. While he states that music works for him, he also notes that he knows of others that cannot really work with music. I have to say I am in the latter group because I require a quiet environment in order to work. A few session attendees also recommended listening to really loud white noise or music in another language other than your own. This allows for less focus to be placed on words being sung compared to the rhythmic beats being played. I have to say that I have not tried these suggestions yet but will in the near future. However, distractions can be very beneficial to productivity in that they give your mind a chance to relax and not think about the issues at hand. He spoke highly of taking vacations, and setting boundaries at work so that develops prevent the problem of burnout. One way he suggested that developer’s combat distractions is to use the Pomodoro technique. In his example he selects one task to do for 20 minutes and he can only do that task during that time. He ignores all other distractions until this task or time limit is complete. After it is completed he allows himself to relax and distract himself for another 5- 10 minutes before his next Pomodoro. This allows him to stay completely focused on a task and when the time is up he can then focus on other things.

Read the article

Oracle Data Integration 12c: Simplified, Future-Ready, High-Performance Solutions

- by Thanos Terentes Printzios

In today’s data-driven business environment, organizations need to cost-effectively manage the ever-growing streams of information originating both inside and outside the firewall and address emerging deployment styles like cloud, big data analytics, and real-time replication. Oracle Data Integration delivers pervasive and continuous access to timely and trusted data across heterogeneous systems. Oracle is enhancing its data integration offering announcing the general availability of 12c release for the key data integration products: Oracle Data Integrator 12c and Oracle GoldenGate 12c, delivering Simplified and High-Performance Solutions for Cloud, Big Data Analytics, and Real-Time Replication. The new release delivers extreme performance, increase IT productivity, and simplify deployment, while helping IT organizations to keep pace with new data-oriented technology trends including cloud computing, big data analytics, real-time business intelligence. With the 12c release Oracle becomes the new leader in the data integration and replication technologies as no other vendor offers such a complete set of data integration capabilities for pervasive, continuous access to trusted data across Oracle platforms as well as third-party systems and applications. Oracle Data Integration 12c release addresses data-driven organizations’ critical and evolving data integration requirements under 3 key themes: Future-Ready Solutions : Supporting Current and Emerging Initiatives Extreme Performance : Even higher performance than ever before Fast Time-to-Value : Higher IT Productivity and Simplified Solutions With the new capabilities in Oracle Data Integrator 12c, customers can benefit from: Superior developer productivity, ease of use, and rapid time-to-market with the new flow-based mapping model, reusable mappings, and step-by-step debugger. Increased performance when executing data integration processes due to improved parallelism. Improved productivity and monitoring via tighter integration with Oracle GoldenGate 12c and Oracle Enterprise Manager 12c. Improved interoperability with Oracle Warehouse Builder which enables faster and easier migration to Oracle Data Integrator’s strategic data integration offering. Faster implementation of business analytics through Oracle Data Integrator pre-integrated with Oracle BI Applications’ latest release. Oracle Data Integrator also integrates simply and easily with Oracle Business Analytics tools, including OBI-EE and Oracle Hyperion. Support for loading and transforming big and fast data, enabled by integration with big data technologies: Hadoop, Hive, HDFS, and Oracle Big Data Appliance. Only Oracle GoldenGate provides the best-of-breed real-time replication of data in heterogeneous data environments. With the new capabilities in Oracle GoldenGate 12c, customers can benefit from: Simplified setup and management of Oracle GoldenGate 12c when using multiple database delivery processes via a new Coordinated Delivery feature for non-Oracle databases. Expanded heterogeneity through added support for the latest versions of major databases such as Sybase ASE v 15.7, MySQL NDB Clusters 7.2, and MySQL 5.6., as well as integration with Oracle Coherence. Enhanced high availability and data protection via integration with Oracle Data Guard and Fast-Start Failover integration. Enhanced security for credentials and encryption keys using Oracle Wallet. Real-time replication for databases hosted on public cloud environments supported by third-party clouds. Tight integration between Oracle Data Integrator 12c and Oracle GoldenGate 12c and other Oracle technologies, such as Oracle Database 12c and Oracle Applications, provides a number of benefits for organizations: Tight integration between Oracle Data Integrator 12c and Oracle GoldenGate 12c enables developers to leverage Oracle GoldenGate’s low overhead, real-time change data capture completely within the Oracle Data Integrator Studio without additional training. Integration with Oracle Database 12c provides a strong foundation for seamless private cloud deployments. Delivers real-time data for reporting, zero downtime migration, and improved performance and availability for Oracle Applications, such as Oracle E-Business Suite and ATG Web Commerce . Oracle’s data integration offering is optimized for Oracle Engineered Systems and is an integral part of Oracle’s fast data, real-time analytics strategy on Oracle Exadata Database Machine and Oracle Exalytics In-Memory Machine. Oracle Data Integrator 12c and Oracle GoldenGate 12c differentiate the new offering on data integration with these many new features. This is just a quick glimpse into Oracle Data Integrator 12c and Oracle GoldenGate 12c. Find out much more about the new release in the video webcast "Introducing 12c for Oracle Data Integration", where customer and partner speakers, including SolarWorld, BT, Rittman Mead will join us in launching the new release. Resource Kits Meet Oracle Data Integration 12c Discover what's new with Oracle Goldengate 12c Oracle EMEA DIS (Data Integration Solutions) Partner Community is available for all your questions, while additional partner focused webcasts will be made available through our blog here, so stay connected. For any questions please contact us at partner.imc-AT-beehiveonline.oracle-DOT-com Stay Connected Oracle Newsletters

Read the article

Share Your Top 30 Visited Domains with Visitation Cloud for Firefox

- by Asian Angel

Curious about the domains that you visit most or perhaps you want a way to share that information on a social website? Now you can see and share the 30 most visited domains in your browser’s history with the Visitation Cloud extension. Accessing Visitation Cloud As soon as you install the extension you can get started using it. Depending on how your browser’s UI is set up there are three methods for accessing Visitation Cloud: a “Visitation Cloud Button” inserted at the end of your “Bookmarks Toolbar”, a menu listing in the “Tools Menu”, and a “Toolbar Button” (not shown here). Visitation Cloud in Action As soon as you activate Visitation Cloud a new window will appear with your top domains displayed in a cloud format. Keep in mind that this is more than just a static image…each listing is actually a clickable link. Clicking on any of the listings will open that domain in a new tab or window depending on your particular browser settings. If you feel that you have a great set of links and want to share it with your friends then that is easy to do. Right click anywhere within the Visitation Cloud Window and select “Save as…”. The “cloud image” can be saved in “.png, .jpg, or Scalable Vector Graphics (.svg)” format. For our example we chose the “.svg format”. Perhaps you love the set of links but not the layout…right click and select “Randomize” to change how the cloud looks. Here is our cloud after being “Randomized”. Things definitely got moved around… Accessing the Visitation Cloud Image in other Browsers Once you have your “cloud image” saved you can share it with friends or save it for your own future use in other browsers. Here is our “cloud image” open in Opera Browser with link opening in progress. The same “cloud image” open in Google Chrome. Very nice… Conclusion While this may not be something that everyone will use Visitation Cloud does make for a rather unique, interesting, & fun way to access and share your most visited domains. Links Download the Visitation Cloud extension (Mozilla Add-ons) Similar Articles Productive Geek Tips Fix "Security Error: Domain Name Mismatch" Warning in FirefoxAdd Variety to Your Searches with Search CloudletRestore Your Missing/Deleted Smart Bookmarks Folder in Firefox 3Blocking Spam from International Senders in Windows Vista MailSee Where a Package is Installed on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Share High Res Photos using Divvyshot Draw Online using Harmony How to Browse Privately in Firefox Kill Processes Quickly with Process Assassin Need to Come Up with a Good Name? Try Wordoid StockFox puts a Lightweight Stock Ticker in your Statusbar

Read the article

Site Search Engine for 1,000 page website

- by Ian

I manage a website with about 1,000 articles that need to be searchable by my members. The site search engines I've tried all had their own problems: Fluid Dynamics Search Engine Since it's written in perl, it was a bit hacky to integrate with my PHP-based CMS. I basically had to file_get_contents the search results page. However, FDSE had the best search results. Google CSE Ugh, the search results SUCK. It can't find documents even using unique strings. I'm so surprised that a Google search product is this bad. Nor can I get any answers on their 'help' forums, and I am a paying user. Boo, Google. Boo. Sphider Again, bad search results. Unable to locate some phrases used in link text. Better results than Google CSE though. Shame on Google that a free PHP script has better search results than their paid application. IndexTank This one looked really promising. I got all set up with their PHP API client. But it would only randomly add articles that I submitted. Out of 700+ articles I pushed to the index through their API, only 8 made it in. Unable to find any help on this subject. Update for IndexTank -- Got the above issue fixed, so this looks most promising so far. The site itself runs on php/mysql and FreeBSD, though this shouldn't matter for a web crawling indexer. I've looked at Lucene, but I don't know anything about Java or installing Java programs on my web server. I also do not have root access on my web server, if this would be required for installation. I really don't need a lot of fancy features. It just needs to be able to crawl my web site and return great (even decent!) search results. I don't need any crazy search operators. It doesn't need to index off my primary domain. It just needs to work! Thanks, Hive Mind!

Read the article

Giving a Bomberman AI intelligent bomb placement

- by Paul Manta

I'm trying to implement an AI algorithm for Bomberman. Currently I have a working but not very smart rudimentary implementation (the current AI is overzealous in placing bombs). This is the first AI I've ever tried implementing and I'm a bit stuck. The more sophisticated algorithms I have in mind (the ones that I expect to make better decisions) are too convoluted to be good solutions. What general tips do you have for implementing a Bomberman AI? Are there radically different approaches for making the bot either more defensive or offensive? Edit: Current algorithm My current algorithm goes something like this (pseudo-code): 1) Try to place a bomb and then find a cell that is safe from all the bombs, including the one that you just placed. To find that cell, iterate over the four directions; if you can find any safe divergent cell and reach it in time (eg. if the direction is up or down, look for a cell that is found to the left or right of this path), then it's safe to place a bomb and move in that direction. 2) If you can't find and safe divergent cells, try NOT placing a bomb and look again. This time you'll only need to look for a safe cell in only one direction (you don't have to diverge from it). 3) If you still can't find a safe cell, don't do anything. for $(direction) in (up, down, left, right): place bomb at current location if (can find and reach divergent safe cell in current $(direction)): bomb = true move = $(direction) return for $(direction) in (up, down, left, right): do not place bomb at current location if (any safe cell in the current $(direction)): bomb = false move = $(direction) return else: bomb = false move = stay_put This algorithm makes the bot very trigger-happy (it'll place bombs very frequently). It doesn't kill itself, but it does have a habit of making itself vulnerable by going into dead ends where it can be blocked and killed by the other players. Do you have any suggestions on how I might improve this algorithm? Or maybe I should try something completely different? One of the problems with this algorithm is that it tends to leave the bot with very few (frequently just one) safe cells on which it can stand. This is because the bot leaves a trail of bombs behind it, as long as it doesn't kill itself. However, leaving a trail of bombs behind leaves few places where you can hide. If one of the other players or bots decide to place a bomb somewhere near you, it often happens that you have no place to hide and you die. I need a better way to decide when to place bombs.

Read the article

Archbeat Link-O-Rama Top 10 Facebook Faves - June 23-29, 2013

- by Bob Rhubart

2,947 people now follow OTN ArchBeat on Facebook. Here are the Top 10 items shared on that page for June 23-29, 2013. Podcast Show Notes: DevOps, Cloud, and Role Creep After some confusion (my bad) all three CORRECT parts of this podcast are now available. The panelists for this discussion are all Oracle ACE Directors: Ron Batra, Basheer Khan, and Cary Millsap. SOA Suite 11g Developers Cookbook Published | Antony Reynolds "The book focuses on areas that we felt we had neglected in the Developers Guide, says co-author Antony Reynolds. "There is more about Java integration and OSB, both of which we see a lot of questions about when working with customers." Using Oracle TimesTen With Oracle BI Applications (Part 2) | Peter Scott Peter Scott follows up an earlier post with a look at some of the OBIA structures and a discussion of some of the features of TimesTen. Linux-Containers — Part 1: Overview | Lenz Grimmer OTN Garage blogger Lenz Grimmer kicks off a series and expands your mind with deep detail on Linux Containers Slides from my ODTUG Kscope13 Presentation | Zeeshan Baig Oracle ACE Zeeshan Baig shares the slides from his KScope13 presentation, "Build Your Business Services Using ADF Task Flows." Fun with Enterprise Manager | Rene van Wijk Oracle ACE Rene van Wijk shares some background and some tuning and other tech tips for working with Oracle Enterprise Manager. Using VirtualBox to test drive Windows Blue | The Fat Bloke The Fat Bloke shares a tech tip for those interested in giving Windows Blue a try on Virtual Box. Podcast Show Notes: The Fusion Middleware A-Team and the Chronicles of Architecture In this three-part series Oracle Fusion Middleware A-Team members Jennifer Briscoe, Clifford Musante, Mikael Ottosson, and Pardha Reddy talk about the origins and mission of the FMW A-Team and about the great technical content you'll find on the recently launched Oracle A-Team blog. Part one is now available. 5 Best Practices - Laying the Foundation for WebCenter Projects | John Brunswick Oracle WebCenter expert John Brunswick shares best practices that "enable the creation of portal solutions with minimal resource overhead, while offering the greatest flexibility for progressive elaboration." Oracle Magazine - July/Aug 2013 The digital edition of the July/August edition of Oracle Magazine is now available. This issue includes my architect community column, "The CX Factor." which features insight from community members on "why and how CX has become a significant factor in enterprise IT." h

Read the article

Know more about Cache Buffer Handle

- by Liu Maclean(???)

??????«latch free:cache buffer handles???SQL????»?????cache buffer handle latch?????,?????????: “?????pin?buffer header???????buffer handle,??buffer handle?????????cache buffer handles?,??????cache buffer handles??????,???????cache???buffer handles,?????(reserved set)?????????????_db_handles_cached(???5)???,?????????????????SQL??????????????????????,????pin??????,????????handle,?????????5?cached buffer handles???handle????????????????,Oracle?????????????????pin?”????“?buffer,????????????????handle???db_block_buffers/processes,????_cursor_db_buffers_pinned???????cache buffer handles?????,??????,????????????SQL,????cache?buffer handles?????????,??????????????,???????????/?????” ????T.ASKMACLEAN.COM????,??????cache Buffer handle?????: cache buffer handle ??: ------------------------------ | Buffer state object | ------------------------------ | Place to hang the buffer | ------------------------------ | Consistent Get? | ------------------------------ | Proc Owning SO | ------------------------------ | Flags(RIR) | ------------------------------ ???? cache buffer handle SO: 70000046fdfe530, type: 24, owner: 70000041b018630, flag: INIT/-/-/0×00(buffer) (CR) PR: 70000048e92d148 FLG: 0×500000lock rls: 0, class bit: 0kcbbfbp: [BH: 7000001c7f069b0, LINK: 70000046fdfe570]where: kdswh02: kdsgrp, why: 0BH (7000001c7f069b0) file#: 12 rdba: 0×03061612 (12/398866) class: 1 ba: 7000001c70ee000set: 75 blksize: 8192 bsi: 0 set-flg: 0 pwbcnt: 0dbwrid: 2 obj: 66209 objn: 48710 tsn: 6 afn: 12hash: [700000485f12138,700000485f12138] lru: [70000025af67790,700000132f69ee0]lru-flags: hot_bufferckptq: [NULL] fileq: [NULL] objq: [700000114f5dd10,70000028bf5d620]use: [70000046fdfe570,70000046fdfe570] wait: [NULL]st: SCURRENT md: SHR tch: 0flags: affinity_lockLRBA: [0x0.0.0] HSCN: [0xffff.ffffffff] HSUB: [65535]where: kdswh02: kdsgrp, why: 0 # Example:# (buffer) (CR) PR: 37290 FLG: 0# kcbbfbp : [BH: befd8, LINK: 7836c] (WAITING) Buffer handle (X$KCBBF) kernel cache, buffer buffer_handles Query x$kcbbf – lists all the buffer handles ???? _db_handles System-wide simultaneous buffer operations ,no of buffer handles_db_handles_cached Buffer handles cached each process , no of processes default 5_cursor_db_buffers_pinned additional number of buffers a cursor can pin at once_session_kept_cursor_pins Number of cursors pins to keep in a session When a buffer is pinned it is attached to buffer state object. ??? ???????? cache buffer handles latch ? buffer pin???: SESSION A : SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE 10.2.0.5.0 Production TNS for Linux: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production SQL> create table test_cbc_handle(t1 int); Table created. SQL> insert into test_cbc_handle values(1); 1 row created. SQL> commit; Commit complete. SQL> select rowid from test_cbc_handle; ROWID ------------------ AAANO6AABAAAQZSAAA SQL> select * from test_cbc_handle where rowid='AAANO6AABAAAQZSAAA'; T1 ---------- 1 SQL> select addr,name from v$latch_parent where name='cache buffer handles'; ADDR NAME ---------------- -------------------------------------------------- 00000000600140A8 cache buffer handles SQL> select to_number('00000000600140A8','xxxxxxxxxxxxxxxxxxxx') from dual; TO_NUMBER('00000000600140A8','XXXXXXXXXXXXXXXXXXXX') ---------------------------------------------------- 1610694824 ??cache buffer handles????parent latch ??? child latch ???SESSION A hold ??????cache buffer handles parent latch ???? oradebug call kslgetl ??, kslgetl?oracle??get latch??? SQL> oradebug setmypid; Statement processed. SQL> oradebug call kslgetl 1610694824 1; Function returned 1 ?????SESSION B ???: SQL> select * from v$latchholder; PID SID LADDR NAME GETS ---------- ---------- ---------------- ---------------------------------------------------------------- ---------- 15 141 00000000600140A8 cache buffer handles 119 cache buffer handles latch ???session A hold??,????????acquire cache buffer handle latch SQL> select * from test_cbc_handle where rowid='AAANO6AABAAAQZSAAA'; T1 ---------- 1 ?????Server Process?????? read buffer, ????????"_db_handles_cached", ??process?cache 5? cache buffer handle ??"_db_handles_cached"=0,?process????5????cache buffer handle , ???? process ???pin buffer,???hold cache buffer handle latch??????cache buffer handle SQL> alter system set "_db_handles_cached"=0 scope=spfile; System altered. ????? shutdown immediate; startup; session A: SQL> oradebug setmypid; Statement processed. SQL> oradebug call kslgetl 1610694824 1; Function returned 1 session B: select * from test_cbc_handle where rowid='AAANO6AABAAAQZSAAA'; session B hang!! WHY? SQL> oradebug setmypid; Statement processed. SQL> oradebug dump systemstate 266; Statement processed. SO: 0x11b30b7b0, type: 2, owner: (nil), flag: INIT/-/-/0x00 (process) Oracle pid=22, calls cur/top: (nil)/0x11b453c38, flag: (0) - int error: 0, call error: 0, sess error: 0, txn error 0 (post info) last post received: 0 0 0 last post received-location: No post last process to post me: none last post sent: 0 0 0 last post sent-location: No post last process posted by me: none (latch info) wait_event=0 bits=8 holding (efd=4) 600140a8 cache buffer handles level=3 SO: 0x11b305810, type: 2, owner: (nil), flag: INIT/-/-/0x00 (process) Oracle pid=10, calls cur/top: 0x11b455ac0/0x11b450a58, flag: (0) - int error: 0, call error: 0, sess error: 0, txn error 0 (post info) last post received: 0 0 0 last post received-location: No post last process to post me: none last post sent: 0 0 0 last post sent-location: No post last process posted by me: none (latch info) wait_event=0 bits=2 Location from where call was made: kcbzgs: waiting for 600140a8 cache buffer handles level=3 FBD93353:000019F0 10 162 10005 1 KSL WAIT BEG [latch: cache buffer handles] 1610694824/0x600140a8 125/0x7d 0/0x0 FF936584:00002761 10 144 10005 1 KSL WAIT BEG [latch: cache buffer handles] 1610694824/0x600140a8 125/0x7d 0/0x0 PID=22 holding ??cache buffer handles latch PID=10 ?? cache buffer handles latch, ????"_db_handles_cached"=0 ?? process??????cache buffer handles ??systemstate???? kcbbfbp cache buffer handle??, ?? "_db_handles_cached"=0 ? cache buffer handles latch?hold ?? ????cache buffer handles latch , ??? buffer?pin?????????? session A exit session B: SQL> select * from v$latchholder; no rows selected SQL> insert into test_cbc_handle values(2); 1 row created. SQL> commit; Commit complete. SQL> SQL> select t1,rowid from test_cbc_handle; T1 ROWID ---------- ------------------ 1 AAANPAAABAAAQZSAAA 2 AAANPAAABAAAQZSAAB SQL> select spid,pid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat)); SPID PID ------------ ---------- 19251 10 ? GDB ? SPID=19215 ?debug , ?? kcbrls ????breakpoint ??? ????release buffer [oracle@vrh8 ~]$ gdb $ORACLE_HOME/bin/oracle 19251 GNU gdb (GDB) Red Hat Enterprise Linux (7.0.1-37.el5) Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /s01/oracle/product/10.2.0.5/db_1/bin/oracle...(no debugging symbols found)...done. Attaching to program: /s01/oracle/product/10.2.0.5/db_1/bin/oracle, process 19251 Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libskgxp10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libskgxp10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libhasgen10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libhasgen10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libskgxn2.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libskgxn2.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libocr10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libocr10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libocrb10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libocrb10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libocrutl10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libocrutl10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libjox10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libjox10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libclsra10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libclsra10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libdbcfg10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libdbcfg10.so Reading symbols from /s01/oracle/product/10.2.0.5/db_1/lib/libnnz10.so...(no debugging symbols found)...done. Loaded symbols for /s01/oracle/product/10.2.0.5/db_1/lib/libnnz10.so Reading symbols from /usr/lib64/libaio.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib64/libaio.so.1 Reading symbols from /lib64/libdl.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libdl.so.2 Reading symbols from /lib64/libm.so.6...(no debugging symbols found)...done. Loaded symbols for /lib64/libm.so.6 Reading symbols from /lib64/libpthread.so.0...(no debugging symbols found)...done. [Thread debugging using libthread_db enabled] Loaded symbols for /lib64/libpthread.so.0 Reading symbols from /lib64/libnsl.so.1...(no debugging symbols found)...done. Loaded symbols for /lib64/libnsl.so.1 Reading symbols from /lib64/libc.so.6...(no debugging symbols found)...done. Loaded symbols for /lib64/libc.so.6 Reading symbols from /lib64/ld-linux-x86-64.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/ld-linux-x86-64.so.2 Reading symbols from /lib64/libnss_files.so.2...(no debugging symbols found)...done. Loaded symbols for /lib64/libnss_files.so.2 0x00000035c000d940 in __read_nocancel () from /lib64/libpthread.so.0 (gdb) break kcbrls Breakpoint 1 at 0x10e5d24 session B: select * from test_cbc_handle where rowid='AAANPAAABAAAQZSAAA'; select hang !! GDB (gdb) c Continuing. Breakpoint 1, 0x00000000010e5d24 in kcbrls () (gdb) bt #0 0x00000000010e5d24 in kcbrls () #1 0x0000000002e87d25 in qertbFetchByUserRowID () #2 0x00000000030c62b8 in opifch2 () #3 0x00000000032327f0 in kpoal8 () #4 0x00000000013b7c10 in opiodr () #5 0x0000000003c3c9da in ttcpip () #6 0x00000000013b3144 in opitsk () #7 0x00000000013b60ec in opiino () #8 0x00000000013b7c10 in opiodr () #9 0x00000000013a92f8 in opidrv () #10 0x0000000001fa3936 in sou2o () #11 0x000000000072d40b in opimai_real () #12 0x000000000072d35c in main () SQL> oradebug setmypid; Statement processed. SQL> oradebug dump systemstate 266; Statement processed. ?????? kcbbfbp buffer cache handle ? SO state object ? BH BUFFER HEADER link??? ---------------------------------------- SO: 0x11b452348, type: 3, owner: 0x11b305810, flag: INIT/-/-/0x00 (call) sess: cur 11b41bd18, rec 0, usr 11b41bd18; depth: 0 ---------------------------------------- SO: 0x1182dc750, type: 24, owner: 0x11b452348, flag: INIT/-/-/0x00 (buffer) (CR) PR: 0x11b305810 FLG: 0x108000 class bit: (nil) kcbbfbp: [BH: 0xf2fc69f8, LINK: 0x1182dc790] where: kdswh05: kdsgrp, why: 0 BH (0xf2fc69f8) file#: 1 rdba: 0x00410652 (1/67154) class: 1 ba: 0xf297c000 set: 3 blksize: 8192 bsi: 0 set-flg: 2 pwbcnt: 272 dbwrid: 0 obj: 54208 objn: 54202 tsn: 0 afn: 1 hash: [f2fc47f8,1181f3038] lru: [f2fc6b88,f2fc6968] obj-flags: object_ckpt_list ckptq: [1182ecf38,1182ecf38] fileq: [1182ecf58,1182ecf58] objq: [108712a28,108712a28] use: [1182dc790,1182dc790] wait: [NULL] st: XCURRENT md: SHR tch: 12 flags: buffer_dirty gotten_in_current_mode block_written_once redo_since_read LRBA: [0xc7.73b.0] HSCN: [0x0.1cbe52] HSUB: [1] Using State Objects ---------------------------------------- SO: 0x1182dc750, type: 24, owner: 0x11b452348, flag: INIT/-/-/0x00 (buffer) (CR) PR: 0x11b305810 FLG: 0x108000 class bit: (nil) kcbbfbp: [BH: 0xf2fc69f8, LINK: 0x1182dc790] where: kdswh05: kdsgrp, why: 0 buffer tsn: 0 rdba: 0x00410652 (1/67154) scn: 0x0000.001cbe52 seq: 0x01 flg: 0x02 tail: 0xbe520601 frmt: 0x02 chkval: 0x0000 type: 0x06=trans data tab 0, row 0, @0x1f9a tl: 6 fb: --H-FL-- lb: 0x0 cc: 1 col 0: [ 2] c1 02 tab 0, row 1, @0x1f94 tl: 6 fb: --H-FL-- lb: 0x2 cc: 1 col 0: [ 2] c1 15 end_of_block_dump (buffer) (CR) PR: 0x11b305810 FLG: 0x108000 st: XCURRENT md: SHR tch: 12 ? buffer header?status= XCURRENT mode=KCBMSHARE KCBMSHR current share ????? x$kcbbf ????? cache buffer handle SQL> select distinct KCBBPBH from x$kcbbf ; KCBBPBH ---------------- 00 00000000F2FC69F8 ==>0xf2fc69f8 SQL> select * from x$kcbbf where kcbbpbh='00000000F2FC69F8'; ADDR INDX INST_ID KCBBFSO_TYP KCBBFSO_FLG KCBBFSO_OWN ---------------- ---------- ---------- ----------- ----------- ---------------- KCBBFFLG KCBBFCR KCBBFCM KCBBFMBR KCBBPBH ---------- ---------- ---------- ---------------- ---------------- KCBBPBF X0KCBBPBH X0KCBBPBF X1KCBBPBH ---------------- ---------------- ---------------- ---------------- X1KCBBPBF KCBBFBH KCBBFWHR KCBBFWHY ---------------- ---------------- ---------- ---------- 00000001182DC750 748 1 24 1 000000011B452348 1081344 1 0 00 00000000F2FC69F8 00000001182DC750 00 00000001182DC750 00 00000001182DC7F8 00 583 0 SQL> desc x$kcbbf; Name Null? Type ----------------------------------------- -------- ---------------------------- ADDR RAW(8) INDX NUMBER INST_ID NUMBER KCBBFSO_TYP NUMBER KCBBFSO_FLG NUMBER KCBBFSO_OWN RAW(8) KCBBFFLG NUMBER KCBBFCR NUMBER KCBBFCM NUMBER KCBBFMBR RAW(8) KCBBPBH RAW(8) KCBBPBF RAW(8) X0KCBBPBH RAW(8) X0KCBBPBF RAW(8) X1KCBBPBH RAW(8) X1KCBBPBF RAW(8) KCBBFBH RAW(8) KCBBFWHR NUMBER KCBBFWHY NUMBER gdb ?? ?process??????kcbrls release buffer? ???cache buffer handle??? SQL> select distinct KCBBPBH from x$kcbbf ; KCBBPBH ---------------- 00

Search Results

Search found 27232 results on 1090 pages for 'mind mapping software'.

Page 701/1090 | < Previous Page | 697 698 699 700 701 702 703 704 705 706 707 708 | Next Page >

- by sqlworkshops

- by Ben Griswold

- by Simple-Talk Editorial Team

- by Pinal Dave

- by BizTalk Visionary

- by BizTalk Visionary

- by kaleidoscope

- by user756764

- by Pinal Dave

- by elaine blog

- by ScottGu

- by KunaalKapoor

- by Abhijeet Patel

- by BuckWoody

- by pinaldave

- by Patrick Liekhus

- by Nick Harrison

- by david.talamelli

- by Thanos Terentes Printzios

- by Asian Angel

- by Ian

- by Paul Manta

- by Bob Rhubart

- by Liu Maclean(???)

< Previous Page | 697 698 699 700 701 702 703 704 705 706 707 708 | Next Page >