Search Results

Search found 21356 results on 855 pages for 'check digit'.

Page 702/855 | < Previous Page | 698 699 700 701 702 703 704 705 706 707 708 709  | Next Page >

  • Is the following C code safe?

    - by lali
    #include<cstdio> #include<stdlib.h> int main() { char* ptr=NULL; printf("%s",ptr); return 0; } It prints (null) as output. The above is a sample code. In real code i get char* as a return of a function and i wish to print the character string for logging. However, NULL is also a valid return value of that function and so i am wondering if a null check is required before printing the character string? char* ptr=someFuncion(); // do i need the following if statement? if(ptr!=NULL) { printf("%s",ptr); } I just want to be sure that the output would be same i.e if ptr=NULL then output should be (null) on all platforms and compilers and the above code(without if statement) would not crash on any C standard compatible platform. In short, is the above code(without the if statement) standard compatible? Thanks for your help and patience :) Regards lali

    Read the article

  • help with mysql triggers (checking values before insert)

    - by user332817
    hi I'm quite new to mysql and I'm trying to figure out how to use triggers. what I'm trying to do: I have 2 tables, max and sub_max, when I insert a new row to sub_max I want to check if the SUM of the values with the same foreign_key as the new row are less than the value in the max table. I think this sounds confusing so here are my tables: CREATE TABLE max( number INT , MaxAmount integer NOT NULL) CREATE TABLE sub_max( sub_number INT , sub_MaxAmount integer NOT NULL, number INT, FOREIGN KEY ( number ) REFERENCES max( number )) and here is my code for the trigger, I know the syntax is off but this is the best I could do from looking up tutorials. CREATE TRIGGER maxallowed after insert on submax FOR EACH ROW BEGIN DECLARE submax integer; DECLARE maxmax integer; submax = select sum(sub_MaxAmount) from sub_max where sub_number = new.sub_number; submax = submax + new. sub_MaxAmount; maxmax = select MaxAmount from max where number = new.number ; if max>maxmax rollback? END I wanted to know if I'm doing this remotely correctly. Thanks in advance.

    Read the article

  • How do I make the manifest available during a Maven/Surefire unittest run "mvn test" ?

    - by Ernst de Haan
    How do I make the manifest available during a Maven/Surefire unittest run "mvn test" ? I have an open-source project that I am converting from Ant to Maven, including its unit tests. Here's the project source repository with the Maven project: http://github.com/znerd/logdoc My question pertains to the primary module, called "base". This module has a unit test that tests the behaviour of the static method getVersion() in the class org.znerd.logdoc.Library. This method returns: Library.class.getPackage().getImplementationVersion() The getImplementationVersion() method returns a value of a setting in the manifest file. So far, so good. I have tested this in the past and it works well, as long as the manifest is indeed available on the classpath at the path META-INF/MANIFEST.MF (either on the file system or inside a JAR file). Now my challenge is that the manifest file is not available when I run the unit tests: mvn test Surefire runs the unit tests, but my unit test fails with a mesage indicating that Library.getVersion() returned null. When I want to check the JAR, I find that it has not even been generated. Maven/Surefire runs the unit tests against the classes, before the resources are added to the classpath. So can I either run the unit tests against the JAR (implicitly requiring the JAR to be generated first) or can I make sure the resources (including the manifest file) are generated/copied under target/classes before the unit tests are run? Note that I use Maven 2.2.0, Java 1.6.0_17 on Mac OS X 10.6.2, with JUnit 4.8.1.

    Read the article

  • Associate "Code/Properties/Stuff" with Fields in C# without reflection. I am too indoctrinated by J

    - by AlexH
    I am building a library to automatically create forms for Objects in the project that I am working on. The codebase is in C#, and essentially we have a HUGE number of different objects to store information about different things. If I send these objects to the client side as JSON, it is easy enough to programatically inspect them to generate a form for all of the properties. The problem is that I want to be able to create a simple way of enforcing permissions and doing validation on the client side. It needs to be done on a field by field level. In javascript I would do this by creating a parallel object structure, which had some sort of { permissions : "someLevel", validator : someFunction } object at the nodes. With empty nodes implying free permissions and universal validation. This would let me simply iterate over the new object and the permissions object, run the check, and deal with the result. Because I am overfamilar with the hammer that is javascript, this is really the only way that I can see to deal with this problem. My first implementation thus uses reflection to let me treat objects as dictionaries, that can be programatically iterated over, and then I just have dictionaries of dictionaries of PermissionRule objects which can be compared with. Very javascripty. Very awkward. Is there some better way that I can do this? Essentially a way to associate a data set with each property, and then iterate over those properties. Or else am I Doing It Wrong?

    Read the article

  • Cann Boost Program_options separate comma separated argument values

    - by lrm
    If my command line is: > prog --mylist=a,b,c Can Boost's program_options be setup to see three distinct argument values for the mylist argument? I have configured program_options as: namespace po = boost::program_options; po::options_description opts("blah") opts.add_options() ("mylist", std::vector<std::string>>()->multitoken, "description"); po::variables_map vm; po::store(po::parse_command_line(argc, argv, opts), vm); po::notify(vm); When I check the value of the mylist argument, I see one value as a,b,c. I'd like to see three distinct values, split on comma. This works fine if I specify the command line as: > prog --mylist=a b c or > prog --mylist=a --mylist=b --mylist=c Is there a way to configure program_options so that it sees a,b,c as three values that should each be inserted into the vector, rather than one? I am using boost 1.41, g++ 4.5.0 20100520, and have enabled c++0x experimental extensions.

    Read the article

  • Why wouldn't the default Control Adapter mappings work on Chrome or Safari?

    - by Deane
    I have confirmed that my Control Adapters are not triggering in Chrome and Safari. I've debugged, and the breakpoints inside the adapters just don't get hit in Chrome/Safari, when they work perfectly find in Firefox/IE. So, for Chrome/Safari, IIS is just ignoring the mapping. My AdapterMappings.browser file looks like this: <browsers> <browser refID="Default"> <controlAdapters> [...adapters here....] </controlAdapters> </browser> </browsers> This should provide mappings for all browsers, correct? I used the Charles proxy to check what user agents were being sent. They are: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5 Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7 Any idea why this would be? Everything I've read tells me that my browser mappings are correct? And, as I said this works for IE/Firefox, so I know my configuration is technically correct.

    Read the article

  • Reverse search in Hibernate Search

    - by Javi
    Hello, I'm using Hibernate Search (which uses Lucene) for searching some Data I have indexed in a directory. It works fine but I need to do a reverse search. By reverse search I mean that I have a list of queries stored in my database I need to check which one of these queries match with a Data object each time Data Object is created. I need it to alert the user when a Data Object matches with a Query he has created. So I need to index this single Data Object which has just been created and see which queries of my list has this object as a result. I've seen Lucene MemoryIndex Class to create an index in memory so I can do something like this example for every query in a list (though iterating in a Java list of queries would not be very efficient): //Iterating over my list<Query> MemoryIndex index = new MemoryIndex(); //Add all fields index.addField("myField", "myFieldData", analyzer); ... QueryParser parser = new QueryParser("myField", analyzer); float score = index.search(query); if (score > 0.0f) { System.out.println("it's a match"); } else { System.out.println("no match found"); } The problem here is that this Data Class has several Hibernate Search Annotations @Field,@IndexedEmbedded,... which indicated how fields should be indexed, so when I invoke index() method on the FullTextEntityManager instance it uses this information to index the object in the directory. Is there a similar way to index it in memory using this information? Is there a more efficient way of doing this reverse search? Thanks

    Read the article

  • tabs using jquery

    - by sea_1987
    I currently have a tabbed system in place, however it not doing exactly as I need it too, I was hoping that by navigating to the URL with #tab2 suffixed on then end it would navigate to my tabbed page and the tab that is present in the URL would be the one that is active, however the first tab in the sequence is always active, is there a way to check what is being passed in the URL first and if there is #tabid present then make that tab the current tab? My javascript currently looks like this, $(".tab_content").hide(); //Hide all content $("ul.tabNavigation li.shortlist").addClass("active").show(); //Activate first tab (in this case second because of floats) $(".tab_content#shortlist").show(); //Show first tab content //On Click Event $("ul.tabNavigation li").click(function() { $("ul.tabNavigation li").removeClass("active"); //Remove any "active" class $(this).addClass("active"); //Add "active" class to selected tab $(".tab_content").hide(); //Hide all tab content var activeTab = $(this).find("a").attr("href"); //Find the href attribute value to identify the active tab + content $(activeTab).fadeIn(); //Fade in the active ID content return false; });

    Read the article

  • Is it possible to wrap an asynchronous event and its callback in a function that returns a boolean?

    - by Rob Flaherty
    I'm trying to write a simple test that creates an image element, checks the image attributes, and then returns true/false. The problem is that using the onload event makes the test asynchronous. On it own this isn't a problem (using a callback as I've done in the code below is easy), but what I can't figure out is how to encapsulate this into a single function that returns a boolean. I've tried various combinations of closures, recursion, and self-executing functions but have had no luck. So my question: am I being dense and overlooking something simple, or is this in fact not possible, because, no matter what, I'm still trying to wrap an asynchronous function in synchronous expectations? Here's the code: var supportsImage = function(callback) { var img = new Image(); img.onload = function() { //Check attributes and pass true or false to callback callback(true); }; img.src = 'data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs='; }; supportsImage(function(status){ console.log(status); }); To be clear, what I want is to be able to wrap this in something such that it can be used like: if (supportsImage) { //Do some crazy stuff } Thanks! (Btw, I know there are a ton of SO questions regarding confusion about synchronous vs. asynchronous. Apologies if this can be reduced to something previously answered.)

    Read the article

  • Optimize website for touch devices

    - by gregers
    On a touch device like iPhone/iPad/Android it can be difficult to hit a small button with your finger. There is no cross-browser way to detect touch devices with CSS media queries that I know of. So I check if the browser has support for javascript touch events. Until now, other browsers haven't supported them, but the latest Google Chrome on dev channel enabled touch events (even for non touch devices). And I suspect other browser makers will follow, since laptops with touch screens are comming. This is the test I use: function isTouchDevice() { try { document.createEvent("TouchEvent"); return true; } catch (e) { return false; } } The problem is that this only tests if the browser has support for touch events, not the device. Does anyone know of The Correct[tm] way of giving touch devices better user experience? Other than sniffing user agent. Mozilla has a media query for touch devices. But I haven't seen anything like it in any other browser: https://developer.mozilla.org/En/CSS/Media_queries#-moz-touch-enabled Update: I want to avoid using a separate page/site for mobile/touch devices. The solution has to detect touch devices with object detection or similar from JavaScript, or include a custom touch-CSS without user agent sniffing! The main reason I asked, was to make sure it's not possible today, before I contact the css3 working group.

    Read the article

  • pass other form elements to ajax suggestion box script

    - by Alex Calder
    I paid somebody to build me a jQuery AJAX suggestion box script a while back. It works great. Now I'm trying to learn about it enough to modify it to do something different. Right now, the script that generates the suggestions just takes the query text and does the same check every time. Now, I want to be able to pass along additional info so different things are looked for with each instance of a search box. The HTML... simple, obvious. input class="suggest" name="q" type="text" autocomplete="off" / The jQuery looks like this: jQuery(document).ready(function() { $('.suggest').autocomplete( { source:'output.php', minLength:3, focus: function (event, ui) { $(event.target).val(ui.item.label); return false; } } ); [snip] } Instead of: source:'output.php', minLength:3, I'd like: source:'output.php?arg1=blah1&arg2=blah2', minLength:3, where arg1 and arg2 are passed along in the form... input class="suggest" name="q" type="text" autocomplete="off" / input type="hidden" name="arg1" value="blah1" input type="hidden" name="arg2" value="blah2" Does this make sense? Thanks guys. I know just about "this much" about OOL's and javascript, so I'm learning... Alex

    Read the article

  • Installing Rails on Mountain Lion

    - by Jordan Medlock
    I was wondering if you could help me find why I cannot install Ruby on Rails on my MBP with OS X Mountain Lion. It's a weird problem and I'll give you as much info as I can. I've installed ruby and it's working at version 1.9.3 And I've installed ruby gems and it's worked for every other gem I've tried to install. It's version is 1.8.24 When I run $ sudo gem install rails it replies with the message: Successfully installed rails-3.2.8 1 gem installed Although when I ask it rails -v it returns: `Rails is not currently installed on this system. To get the latest version, simply type: $ sudo gem install rails You can then rerun your "rails" command.` What should I do? The rails bash file (/usr/bin/rails) contains: #!/usr/bin/ruby # Stub rails command to load rails from Gems or print an error if not installed. require 'rubygems' version = ">= 0" if ARGV.first =~ /^_(.*)_$/ and Gem::Version.correct? $1 then version = $1 ARGV.shift end begin gem 'railties', version or raise rescue Exception puts 'Rails is not currently installed on this system. To get the latest version, simply type:' puts puts ' $ sudo gem install rails' puts puts 'You can then rerun your "rails" command.' exit 0 end load Gem.bin_path('railties', 'rails', version) That must mean that the gem files aren't there or are old or corrupted How can I check that?

    Read the article

  • Problem when get pageContent of URL in java ?

    - by tiendv
    Hi all ! i have a code for get pagecontent from a URL here is code ! import java.io.BufferedReader; import java.io.IOException; import java.io.InputStreamReader; import java.net.URL; import java.net.URLConnection; public class GetPageFromURLAction extends Thread { public String stringPageContent; public String targerURL; public String getPageContent(String targetURL) throws IOException { String returnString=""; URL urlString = new URL(targetURL); URLConnection openConnection = urlString.openConnection(); String temp; BufferedReader in = new BufferedReader(new InputStreamReader(openConnection.getInputStream())); while ((temp = in.readLine()) != null) { returnString += temp + "\n"; } in.close(); // String nohtml = sb.toString().replaceAll("\\<.*?>",""); return returnString; } public String getStringPageContent() { return stringPageContent; } public void setStringPageContent(String stringPageContent) { this.stringPageContent = stringPageContent; } public String getTargerURL() { return targerURL; } public void setTargerURL(String targerURL) { this.targerURL = targerURL; } @Override public void run() { try { this.stringPageContent=this.getPageContent(targerURL); } catch (IOException e) { e.printStackTrace(); } } } The problem is : 1 Some time i receive a error lik 405 ,or 403 HTTP error ... and result string is null . To repair i check permission to connect URL but it usualy return null URLConnection openConnection = urlString.openConnection(); openConnection.getPermission( ) is mean that i don't have permission to acess link ? To get resultString without HTML Tag ? i do like that String nohtml = sb.toString().replaceAll("\<.*?",""); Para sb is Stringbulder , but it can't remove all HTML Tab in string return ? I use thread here because i must get page alot of url , so how can i cread a multi thread to impro speed of program ! Thanks

    Read the article

  • How to build a Django form which requires a delay to be re-submitted ?

    - by pierre-guillaume-degans
    Hey, In order to avoid spamming, I would like to add a waiting time to re-submit a form (i.e. the user should wait a few seconds to submit the form, except the first time that this form is submitted). To do that, I added a timestamp to my form (and a security_hash field containing the timestamp plus the settings.SECRET_KEY which ensures that the timestamp is not fiddled with). This look like: class MyForm(forms.Form): timestamp = forms.IntegerField(widget=forms.HiddenInput) security_hash = forms.CharField(min_length=40, max_length=40, widget=forms.HiddenInput) # + some other fields.. # + methods to build the hash and to clean the timestamp... # (it is based on django.contrib.comments.forms.CommentSecurityForm) def clean_timestamp(self): """Make sure the delay is over (5 seconds).""" ts = self.cleaned_data["timestamp"] if not time.time() - ts > 5: raise forms.ValidationError("Timestamp check failed") return ts # etc... This works fine. However there is still an issue: the timestamp is checked the first time the form is submitted by the user, and I need to avoid this. Any idea to fix it ? Thank you ! :-)

    Read the article

  • How much effort do you have to put in to get gains from using SSE?

    - by John
    Case One Say you have a little class: class Point3D { private: float x,y,z; public: operator+=() ...etc }; Point3D &Point3D::operator+=(Point3D &other) { this->x += other.x; this->y += other.y; this->z += other.z; } A naive use of SSE would simply replace these function bodies with using a few intrinsics. But would we expect this to make much difference? MMX used to involve costly state cahnges IIRC, does SSE or are they just like other instructions? And even if there's no direct "use SSE" overhead, would moving the values into SSE registers and back out again really make it any faster? Case Two Instead, you're working with a less OO-based code base. Rather than an array/vector of Point3D objects, you simply have a big array of floats: float coordinateData[NUM_POINTS*3]; void add(int i,int j) //yes it's unsafe, no overlap check... example only { for (int x=0;x<3;++x) { coordinateData[i*3+x] += coordinateData[j*3+x]; } } What about use of SSE here? Any better? In conclusion Is trying to optimise single vector operations using SSE actually worthwhile, or is it really only valuable when doing bulk operations?

    Read the article

  • Website Live Chat Script - Interface With Windows Live Messenger?

    - by Sootah
    Hello again fellow StackOverflow users! What I am looking for currently is your opinions on the what the best live chat script would be for my website. I'd be using this on both my local computer repair (which I've not really set up yet) company's site, as well as my other technical support site that is geared more towards showing people how to fix whatever problem they have themselves. It'll be a little bit before I launch it on either site, as I need to find a good design for my local computer repair company's site, as well as redesign TweaksForGeeks.com's layout so that it's more magazine like. (If you have any suggestions on good Wordpress templates for these, that'd also be swell. :) ) Features I'd like for the live chat script to have: (if possible) Real-time posting of messages (or as close to real time as possible) Integration into my Windows Live Messenger account - By this I mean it'd be handy if instead of me having to man a separate open browser window and constantly check it for new messages, it'd be much more convenient if it would instead just allow me to receive and respond to messages via my Windows Live account the same way I'd chat with any other person on my contact list. Sound notification of new messages when the chat isn't the focused window - In the event that using Windows Messenger isn't possible then I'd need it to notify me upon receipt of a new message. Recording of chat transcripts - This is a MUST HAVE Easy customization - I'll likely want to modify how it looks and whatnot, in addition to the fact that I'm going to set it up so that the chat transcripts can be posted to my site easily in order to be useful to my other visitors later on. With all that in mind, what is available out there? I've not really researched this at all yet; aside from doing a cursory search just before I decided to ask my StackOverflow brothers. As always, thank you! -Sootah

    Read the article

  • named_scope + average is causing the table to be specified more then once in the sql query run on po

    - by hadees
    I have a named scopes like so... named_scope :gender, lambda { |gender| { :joins => {:survey_session => :profile }, :conditions => { :survey_sessions => { :profiles => { :gender => gender } } } } } and when I call it everything works fine. I also have this average method I call... Answer.average(:rating, :include => {:survey_session => :profile}, :group => "profiles.career") which also works fine if I call it like that. However if I were to call it like so... Answer.gender('m').average(:rating, :include => {:survey_session => :profile}, :group => "profiles.career") I get... ActiveRecord::StatementInvalid: PGError: ERROR: table name "profiles" specified more than once : SELECT avg("answers".rating) AS avg_rating, profiles.career AS profiles_career FROM "answers" LEFT OUTER JOIN "survey_sessions" survey_sessions_answers ON "survey_sessions_answers".id = "answers".survey_session_id LEFT OUTER JOIN "profiles" ON "profiles".id = "survey_sessions_answers".profile_id INNER JOIN "survey_sessions" ON "survey_sessions".id = "answers".survey_session_id INNER JOIN "profiles" ON "profiles".id = "survey_sessions".profile_id WHERE ("profiles"."gender" = E'm') GROUP BY profiles.career Which is a little hard to read but says I'm including the table profiles twice. If I were to just remove the include from average it works but it isn't really practical because average is actually being called inside a method which gets passed the scoped. So there is some times gender or average might get called with out each other and if either was missing the profile include it wouldn't work. So either I need to know how to fix this apparent bug in Rails or figure out a way to know what scopes were applied to a ActiveRecord::NamedScope::Scope object so that I could check to see if they have been applied and if not add the include for average.

    Read the article

  • Why doesn't my test run tearDownAfterTestClass when it fails

    - by Memor-X
    in a test i am writing the setUpBeforeTests creates a new customer in the database who is then used to perform the tests with so naturally when i finish the test i should get rid of this test customer in tearDownAfterTestClass so that i can create then anew when i rerun the test and not get any false positives how when the tests all run fine i have no problem but if a test fails and i go to rerun it my setUpBeforeTests fails because i check for mysql errors in it like this try { if(!mysqli_query($connection,$query)) { $this->assertTrue(false); } } catch (Exception $exc) { $msg = '[tearDownAfterTestClass] Exception Error' . PHP_EOL . PHP_EOL; $msg .= 'Could not run query - '.mysqli_error($connection). PHP_EOL;; $this->fail($msg); } the error i get is that there is a primary key violation which is expected cause i'm trying to create a new customer using the same data (primary key is on email which is also used to log in) however that means when the test failed it didn't run tearDownAfterTestClass now i could just move everything in tearDownAfterTestClass to the start of setUpBeforeTests however to me that seems like bad programming since it defeates the purpose of even have tearDownAfterTestClass so i am wondering, why isn't my tearDownAfterTestClass running when a test fails NOTE: the database is a fundamental part of the system i'm testing and the database and system are on a separate development environment not the live one, the backup files for the database are almost 2 GBs and takes almost 1/2 an hour to restore, the purpose of the tear down is to remove any data we have added because of the test so that we don't have to restore the database every time we run the tests

    Read the article

  • Stack Overflow like Watermarks in Forms

    - by Kaushik Gopal
    Hey people, I remember seeing a tutorial somewhere that talks of how to style your input forms in a more "usable" way. Essentially, you have a placeholder value and when you enter the input, it hides the hint so to speak. Now, just to be clear: I don't want the hint (placeholder value text) to disappear onFocus, but rather to go lighter when I first start typing something. Good e.gs: Check out the forms on Aardvark http://vark.com/. This is exactly how I wish to have my input forms. Our very own stackoverflow. When you try to ask a question, on clicking inside any input form, it doesn't hide the text right away. You see your cursor as well as the hint. but when you start to type, it hides the hint(I would prefer having it go to a much lighter shade rather than hiding all together, like above example). I remember very clearly reading a tutorial somewhere on the interwebz with this exact requirement, but darn forgot to bookmark it. Any suggestions/links?

    Read the article

  • Multiple ajax request and progress bar

    - by hunt
    Hi, In a following piece of code i am create a progress bar and showing its progress as the ajax request get processed. i am faking the progress shown here just by adding 5 in to cnt counter variable after that i made a check when counter reach to 90. at this point if the request is not executed successfully then i will pause/disable the progress bar and whenever response come i will complete the whole progress bar with 100. now the problem is i want to add multiple progress bar as i am firing multiple ajax request. so following is the code to implement only for one request and one progress bar but i want it for more than one. as global variables are used over here for checking response and timer id so i don't know how well i can handle it for multiple request var cnt=0; var res=null; function getProgress(data){ res=data; } var i =0; $('#start').click(function(){ i = setInterval(function() { if(res!=null) { clearInterval(i); $("#pb1").progressbar( "option", "value", cnt=cnt+100 ); } var value = $("#pb1").progressbar("option", "value"); if(value >=90 && res==null){ $("#pb1").progressbar("option", "disable"); } else{ $("#pb1").progressbar( "option", "value", cnt=cnt+5 ); } },2500); $.ajax({ url: 'http://localhost/beta/demo.php', success: getProgress }); }); $("#pb1").progressbar({ value: 0 , change: function(event, ui) { if(res!=null) clearInterval(i); } });

    Read the article

  • MySql Query lag time?

    - by Click Upvote
    When there are multiple PHP scripts running in parallel, each making an UPDATE query to the same record in the same table repeatedly, is it possible for there to be a 'lag time' before the table is updated with each query? I have basically 5-6 instances of a PHP script running in parallel, having been launched via cron. Each script gets all the records in the items table, and then loops through them and processes them. However, to avoid processing the same item more than once, I store the id of the last item being processed in a seperate table. So this is how my code works: function getCurrentItem() { $sql = "SELECT currentItemId from settings"; $result = $this->db->query($sql); return $result->get('currentItemId'); } function setCurrentItem($id) { $sql = "UPDATE settings SET currentItemId='$id'"; $this->db->query($sql); } $currentItem = $this->getCurrentItem(); $sql = "SELECT * FROM items WHERE status='pending' AND id > $currentItem'"; $result = $this->db->query($sql); $items = $result->getAll(); foreach ($items as $i) { //Check if $i has been processed by a different instance of the script, and if so, //leave it untouched. if ($this->getCurrentItem() > $i->id) continue; $this->setCurrentItem($i->id); // Process the item here } But despite of all the precautions, most items are being processed more than once. Which makes me think that there is some lag time between the update queries being run by the PHP script, and when the database actually updates the record. Is it true? And if so, what other mechanism should I use to ensure that the PHP scripts always get only the latest currentItemId even when there are multiple scripts running in parrallel? Would using a text file instead of the db help?

    Read the article

  • ExpertPDF and Caching of URLs

    - by Josh
    We are using ExpertPDF to take URLs and turn them into PDFs. Everything we do is through memory, so we build up the request and then read the stream into ExpertPDF and then write the bits to file. All the files we have been requesting so far are just plain HTML documents. Our designers update CSS files or change the HTML and rerequest the documents as PDFs, but often times, things are getting cached. Take, for example, if I rename the only CSS file and view the HTML page through a web browser, the page looks broke because the CSS doesn't exist. But if I request that page through the PDF Generator, it still looks ok, which means somewhere the CSS is cached. Here's the relevant PDF creation code: // Create a request HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(url); request.UserAgent = "IE 8.0"; request.ContentType = "application/x-www-form-urlencoded"; request.Method = "GET"; // Send the request HttpWebResponse resp = (HttpWebResponse)request.GetResponse(); if (resp.IsFromCache) { System.Web.HttpContext.Current.Trace.Write("FROM THE CACHE!!!"); } else { System.Web.HttpContext.Current.Trace.Write("not from cache"); } // Read the response pdf.SavePdfFromHtmlStream(resp.GetResponseStream(), System.Text.Encoding.UTF8, "Output.pdf"); When I check the trace file, nothing is being loaded from cache. I checked the IIS log file and found a 200 response coming from the request, even after a file had been updated (I would expect a 302). We've tried putting the No-Cache attribute on all HTML pages, but still no luck. I even turned off all caching at the IIS level. Is there anything in ExpertPDF that might be caching somewhere or something I can do to the request object to do a hard refresh of all resources? UPDATE I put ?foo at the end of my style href links and this updates the CSS everytime. Is there a setting someplace that can prevent stylesheets from being cached so I don't have to do this inelegant solution?

    Read the article

  • What most efficient method to find a that triangle which contains the given point?

    - by Christo
    Given the triangle with vertices (a,b,c): c / \ / \ / \ a - - - b Which is then subdivided into four triangles by halving each of the edges: c / \ / \ ca / \ bc /\ - - - /\ / \ / \ / \ / \ a- - - - ab - - - -b Wich results in four triangles (a, ab, ca), (b, bc, ab), (c, ca, bc), (ab, bc, ca). Now given a point p. How do I determine in which triangle p lies, given that p is within the outer triangle (a, b, c)? Currently I intend to use ab as the origin. Check whether it is to the left of right of the line "ca - ab" using the perp of "ca - ab" and checking the sign against the dot product of "ab - a" and the perp vector and the vector "p - ab". If it is the same or the dot product is zero then it must be in (a, ab, ca)... Continue with this procedure with the other outer triangles (b, ba, ab) & (c, ca, ba). In the end if it didn't match with these it must be contained within the inner triangle (ab, bc, ca). Is there a better way to do it?

    Read the article

  • tail call generated by clang 1.1 and 1.0 (llvm 2.7 and 2.6)

    - by ony
    After compilation next snippet of code with clang -O2 (or with online demo): #include <stdio.h> #include <stdlib.h> int flop(int x); int flip(int x) { if (x == 0) return 1; return (x+1)*flop(x-1); } int flop(int x) { if (x == 0) return 1; return (x+0)*flip(x-1); } int main(int argc, char **argv) { printf("%d\n", flip(atoi(argv[1]))); } I'm getting next snippet of llvm assembly in flip: bb1.i: ; preds = %bb1 %4 = add nsw i32 %x, -2 ; <i32> [#uses=1] %5 = tail call i32 @flip(i32 %4) nounwind ; <i32> [#uses=1] %6 = mul nsw i32 %5, %2 ; <i32> [#uses=1] br label %flop.exit I thought that tail call means dropping current stack (i.e. return will be to the upper frame, so next instruction should be ret %5), but according to this code it will do mul for it. And in native assembly there is simple call without tail optimisation (even with appropriate flag for llc) Can sombody explain why clang generates such code? As well I can't understand why llvm have tail call if it can simply check that next ret will use result of prev call and later do appropriate optimisation or generate native equivalent of tail-call instruction?

    Read the article

  • Vbscript - Checking each subfolder for files

    - by Kenny Bones
    Ok, this is a script that's supposed to basically mirror two sets of folders. I managed to get it to work, but it seems like it didn't check each subfolder. So, I added these lines to the code: Set colFolders = objFolder.Subfolders Then I added this: For each subFolder in colFolders For each objFile in colFiles Dim DateModified DateModified = objFile.DateLastModified ReplaceIfNewer objFile, DateModified, strSourceFolder, strDestFolder Next Next This however does not seem to be working. This is the full code below. Dim strSourceFolder, strDestFolder Dim fso, objFolder, colFiles, colfolders strSourceFolder = "c:\users\vegsan\desktop\Source\" strDestFolder = "c:\users\vegsan\desktop\Dest\" Set fso = CreateObject("Scripting.FileSystemObject") Set objFolder = fso.GetFolder(strSourceFolder) Set colFiles = objFolder.Files Set colFolders = objFolder.Subfolders For each subFolder in colFolders For each objFile in colFiles Dim DateModified DateModified = objFile.DateLastModified ReplaceIfNewer objFile, DateModified, strSourceFolder, strDestFolder Next Next Sub ReplaceIfNewer (sourceFile, DateModified, SourceFolder, DestFolder) Const OVERWRITE_EXISTING = True Dim fso, objFolder, colFiles, sourceFileName, destFileName Dim DestDateModified, objDestFile Set fso = CreateObject("Scripting.FileSystemObject") sourceFileName = fso.GetFileName(sourceFile) destFileName = DestFolder & sourceFileName if fso.FileExists(destFileName) Then Set objDestFile = fso.GetFile(destFileName) DestDateModified = objDestFile.DateLastModified if DateModified <> DestDateModified Then fso.CopyFile sourceFile, destFileName End if End if if Not fso.FileExists(destFileName) Then fso.CopyFile sourceFile, destFileName End if End Sub

    Read the article

< Previous Page | 698 699 700 701 702 703 704 705 706 707 708 709  | Next Page >