Search Results

Search found 55281 results on 2212 pages for 'get set'.

Page 702/2212 | < Previous Page | 698 699 700 701 702 703 704 705 706 707 708 709  | Next Page >

• Wake OSX 10.8 over WiFi (WoWL - Wake on WiFi Lan)

  - by WrinkledCheese

  I have a stack of Apple Mac minis running SSH servers for remote login. The problem is that I can't seem to get them to wake up. From what I gathered, as of Mac OSX 10.7 you required to have a boot time option set - darkwake=0 10.7 and darkwake=no 10.8. So I tried this and then I came to the realization that this will probably work for a wired connection but I'm using WiFi. My wired connections are used for another local subnet without Internet access, so I have to get it to wake on WiFi. I realize that I can just set the stack of Mac minis to just not sleep, but I'm looking for a sleep enabled option. These services don't require initial response speed as once the connection is made they will be active and once they are no longer active they will hopefully go back to sleep. I have a FreeBSD box running avahi-daemon in order to try and wake the Macs with the Bonjour Service but it doesn't seem to work. I tried registering the service as Gordon suggested in the below post, but that just makes it so that there isn't a timeout when discovering services and resolving them. It still doesn't allow ssh connections to port 22 when it's asleep. For reference, I want what seems like what Gordon Davisson explained on this question: Wake on Demand for Apache server in OS X 10.8

  Read the article

• Why does redis report limit of 1024 files even after update to limits.conf?

  - by esilver

  I see this error at the top of my redis.log file: Current maximum open files is 1024. maxclients has been reduced to 4064 to compensate for low ulimit. I have followed these steps to the letter (and rebooted): Moreover, I see this when I run ulimit: ubuntu@ip-XX-XXX-XXX-XXX:~$ ulimit -n 65535 Is this error specious? If not, what other steps do I need to perform? I am running redis 2.8.13 (tip of the tree) on Ubuntu LTS 14.04.1 (again, tip of the tree). Here is the user info: ubuntu@ip-XX-XXX-XXX-XXX:~$ ps aux | grep redis root 1027 0.0 0.0 66328 2112 ? Ss 20:30 0:00 sudo -u ubuntu /usr/local/bin/redis-server /etc/redis/redis.conf ubuntu 1107 19.2 48.8 7629152 7531552 ? Sl 20:30 2:21 /usr/local/bin/redis-server *:6379 The server is therefore running as ubuntu. Here are my limits.conf file without comments: ubuntu@ip-XX-XXX-XXX-XXX:~$ cat /etc/security/limits.conf | sed '/^#/d;/^$/d' ubuntu soft nofile 65535 ubuntu hard nofile 65535 root soft nofile 65535 root hard nofile 65535 And here is the output of sysctl fs.file-max: ubuntu@ip-XX-XXX-XXX-XXX:~$ sysctl -a| grep fs.file-max sysctl: permission denied on key 'fs.protected_hardlinks' sysctl: permission denied on key 'fs.protected_symlinks' fs.file-max = 1528687 sysctl: permission denied on key 'kernel.cad_pid' sysctl: permission denied on key 'kernel.usermodehelper.bset' sysctl: permission denied on key 'kernel.usermodehelper.inheritable' sysctl: permission denied on key 'net.ipv4.tcp_fastopen_key' as sudo ubuntu@ip-10-102-154-226:~$ sudo sysctl -a| grep fs.file-max fs.file-max = 1528687 Also, I see this error at the top of the redis.log file, not sure if it's related. It makes sense that the ubuntu user isn't allowed to change max open files, but given the high ulimits I have tried to set he shouldn't need to: [1050] 23 Aug 21:00:43.572 # You requested maxclients of 10000 requiring at least 10032 max file descriptors. [1050] 23 Aug 21:00:43.572 # Redis can't set maximum open files to 10032 because of OS error: Operation not permitted.

  Read the article

• Can a pool of memcache daemons be used to share sessions more efficiently?

  - by Tom

  We are moving from a 1 webserver setup to a two webserver setup and I need to start sharing PHP sessions between the two load balanced machines. We already have memcached installed (and started) and so I was pleasantly surprized that I could accomplish sharing sessions between the new servers by changing only 3 lines in the php.ini file (the session.save_handler and session.save_path): I replaced: session.save_handler = files with: session.save_handler = memcache Then on the master webserver I set the session.save_path to point to localhost: session.save_path="tcp://localhost:11211" and on the slave webserver I set the session.save_path to point to the master: session.save_path="tcp://192.168.0.1:11211" Job done, I tested it and it works. But... Obviously using memcache means the sessions are in RAM and will be lost if a machine is rebooted or the memcache daemon crashes - I'm a little concerned by this but I am a bit more worried about the network traffic between the two webservers (especially as we scale up) because whenever someone is load balanced to the slave webserver their sessions will be fetched across the network from the master webserver. I was wondering if I could define two save_paths so the machines look in their own session storage before using the network. For example: Master: session.save_path="tcp://localhost:11211, tcp://192.168.0.2:11211" Slave: session.save_path="tcp://localhost:11211, tcp://192.168.0.1:11211" Would this successfully share sessions across the servers AND help performance? i.e save network traffic 50% of the time. Or is this technique only for failovers (e.g. when one memcache daemon is unreachable)? Note: I'm not really asking specifically about memcache replication - more about whether the PHP memcache client can peak inside each memcache daemon in a pool, return a session if it finds one and only create a new session if it doesn't find one in all the stores. As I'm writing this I'm thinking I'm asking a bit much from PHP, lol... Assume: no sticky-sessions, round-robin load balancing, LAMP servers.

  Read the article

• Exchange 2013 attachments too big?

  - by KPS

  I am having the toughest time sending large attachments, everywhere I have checked my file size limit for send/receive is 100mb but yet users are unable to receive files even at the size of 14mb. I'm using a spam filter (Appriver) and have worked with there support for a very long time, we see the following errors in logs 13:32:40.260 4 SMTP-000036([myserverIP]) rsp: 354 Start mail input; end with <CRLF>.<CRLF> 13:33:41.038 3 SMTP-000033([myserverIP]) write failed. Error Code=connection reset by peer 13:33:41.038 3 SMTP-000033([myserverIP]) [659500] failed to send. Error Code=connection reset by peer 13:33:41.038 4 SMTP([myserverIP]) [659500] batch reenqueued into tail Windows firewall is disabled on the exchange server, all other emails that are of smaller value come through just fine. Here is a print out of size limits: ConnectorType ConnectorName MaxReceiveMessageSize MaxSendMessageSize ------------- ------------- --------------------- ------------------ Send InternetSendConnector - 35 MB (36,700,160 bytes) Send Appriver-Smarthost - 35 MB (36,700,160 bytes) Receive Default EXCHSRVR 100 MB (104,857,600 bytes) - Receive Client Proxy EXCHSRVR 100 MB (104,857,600 bytes) - Receive Default Frontend EXCHSRVR 100 MB (104,857,600 bytes) - Receive Outbound Proxy Frontend EXCHSRVR 100 MB (104,857,600 bytes) - Receive Client Frontend EXCHSRVR 100 MB (104,857,600 bytes) - Receive ExchangeRelay 100 MB (104,857,600 bytes) - TransportConfig - 100 MB (104,857,600 bytes) 10 MB (10,485,760 bytes) ADSiteLink DEFAULTIPSITELINK Unlimited Unlimited There is a no anti-virus on the server either that could be interfering, I am out of ideas at this point :( EDIT 1 After running BPA, it gives and error: Exchange Organization: Check whether the incoming message(CN=MyDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=WG,DC=local) size isn't set The maximum incoming message size isn't set in organization 'CN=MyDomain,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=WG,DC=local'. This can cause reliability problems. Here are the sizes as of now: [PS] C:\Temp>Get-TransportConfig | ft MaxSendSize, MaxReceiveSize MaxSendSize MaxReceiveSize ----------- -------------- Unlimited Unlimited [PS] C:\Temp>Get-ReceiveConnector | ft name, MaxMessageSize Name MaxMessageSize ---- -------------- Default EXCHSRVR 100 MB (104,857,600 bytes) Client Proxy EXCHSRVR 100 MB (104,857,600 bytes) Default Frontend EXCHSRVR 100 MB (104,857,600 bytes) Outbound Proxy Frontend EXCHSRVR 100 MB (104,857,600 bytes) Client Frontend EXCHSRVR 100 MB (104,857,600 bytes) ExchangeRelay 100 MB (104,857,600 bytes) Again, smaller emails come through just fine. Seems like there is a 10mb receive limit somewhere that I cannot find.

  Read the article

• VirtualHost on WAMPSERVER not working

  - by Martin C

  I currently have WAMPSERVER 2.2 set up on my PC. I'm trying to set up a new host called pplocal.local I made the changes in httpd.conf to uncomment this: Include conf/extra/httpd-vhosts.conf Then, I edited httpd-vhosts.cong and I added the following: NameVirtualHost 127.0.0.1 <VirtualHost 127.0.0.1> DocumentRoot "E:/wamp2/www/" ServerName localhost </VirtualHost> <VirtualHost 127.0.0.1> DocumentRoot "E:/wamp2/www/pp/" ServerName pplocal.local <Directory "E:/wamp2/www/pp/"> Options Indexes FollowSymLinks MultiViews AllowOverride all Order Deny,Allow Deny from all Allow from 127.0.0.1 </Directory> CustomLog "E:\wamp2\logs\pplocal-access.log" common ErrorLog "E:\wamp2\logs\pplocal-error.log" Im my windows 'hosts' file I added: 127.0.0.1 localhost 127.0.0.1 pplocal.local Then, I restarted apache. If I type localhost in my browser I get the files at E:/wamp2/www/ If I type pplocal.local in my browser I get the files at E:/wam2/www/ instead of those at E:/wamp2/www/pp/ I have followed several tutorials and can't see what I'm doing wrong. I'm new to editing the files associated with apache so any advice is appreciated. Thanks

  Read the article

• MySQL Config on Large Machine

  - by Jonathon

  We have a Windows 2003 Enterprise Edition server (64bit) running only MySQL 5.1.45 64-bit. It has 16G RAM and 10T of hard-drive space in RAID 10. We are having horrible performance from mysqld (85-100% CPU utilization). We were running a smaller machine with better performance, so I am assuming our my.ini file is not correct for our current machine. The my.ini file is as follows: [client] port=3306 [mysql] default-character-set=latin1 [mysqld] port=3306 basedir="D:/MySQL/" datadir="D:/MySQL/data" default-character-set=latin1 default-storage-engine=MYISAM sql-mode="" skip-innodb skip-locking max_allowed_packet = 1M max_connections=800 myisam_max_sort_file_size=5G myisam_sort_buffer_size=500M table_open_cache = 512 table_cache=8000 tmp_table_size=30M query_cache_size=50M thread_cache_size=128 key_buffer_size=3072M read_buffer_size=2M read_rnd_buffer_size=16M sort_buffer_size=2M #replication settings (this is the master) log-bin=log server-id = 1 Does anyone see anything wrong with this setup? For a machine with this much RAM, why in the world would mysqld eat up so much CPU? I know we can optimize some queries, etc., but it did run okay on a smaller machine, so I am pretty sure it is the config. Thanks in advance for any help.

  Read the article

• Courier-imap login problem after upgrading / enabling verbose logging

  - by halka

  I've updated my mail server last night, from Debian etch to lenny. So far I've encountered a problem with my postfix installation, mainly that I managed to broke the IMAP access somehow. When trying to connect to the IMAP server with Thunderbird, all I get in mail.log is: Feb 12 11:57:16 mail imapd-ssl: Connection, ip=[::ffff:10.100.200.65] Feb 12 11:57:16 mail imapd-ssl: LOGIN: ip=[::ffff:10.100.200.65], command=AUTHENTICATE Feb 12 11:57:16 mail authdaemond: received auth request, service=imap, authtype=login Feb 12 11:57:16 mail authdaemond: authmysql: trying this module Feb 12 11:57:16 mail authdaemond: SQL query: SELECT username, password, "", '105', '105', '/var/virtual', maildir, "", name, "" FROM mailbox WHERE username = '[email protected]' AND (active=1) Feb 12 11:57:16 mail authdaemond: password matches successfully Feb 12 11:57:16 mail authdaemond: authmysql: sysusername=<null>, sysuserid=105, sysgroupid=105, homedir=/var/virtual, [email protected], fullname=<null>, maildir=xoxo.sk/[email protected]/, quota=<null>, options=<null> Feb 12 11:57:16 mail authdaemond: Authenticated: sysusername=<null>, sysuserid=105, sysgroupid=105, homedir=/var/virtual, [email protected], fullname=<null>, maildir=xoxo.sk/[email protected]/, quota=<null>, options=<null> ...and then Thunderbird proceeds to complain that it cant' login / lost connection. Thunderbird is definitely not configured to connect through SSL/TLS. POP3 (also provided by Courier) is working fine. I've been mainly looking for a way to make the courier-imap logging more verbose, like can be seen for example here. Edit: Sorry about the mess, I've found that I've been funneling the log through grep imap, which naturally didn't display entries for authdaemond. The verbose logging configuration entry is found in /etc/courier/imapd under DEBUG_LOGIN=1 (set to 1 to enable verbose logging, set to 2 to enable dumping plaintext passwords to logfile. Careful.)

  Read the article

• How can I associate html/htm files with Chrome in Windows 7 64 bit?

  - by matt

  I want Chrome to open all .html files. It is currently set as my default browser, however html files open in IE9. When I go to Control Panel\Programs\Default Programs\Set Associations I see that .html and .htm files are associated with IE. When I choose to change the default program it I'm presented with a list of programs but Chrome is not one of them. I browse to, and then select the Chrome.exe (C:\Users\Matt\AppData\Local\Google\Chrome\Application\chrome.exe) but it goes right back to IE. This is the first time I've seen anything like this. I'm running Windows 7 64 bit. I never had this problem on Windows 7 32 bit. Is this because Chrome by default installs in the User directory, not the Program Files directory? How can I fix these file associations? EDIT: It's not that things are reverting back to IE after associating them with Chrome. When I browse to Chrome in the file association window, and select it, it doesn't seem to take. It doesn't show Chrome in the list of programs despite pointing to the Chrome.exe location. I really think this has something to do with the fact that it doesn't install into the Program File Directory.

  Read the article

• Private staff network within public network

  - by pianohacker

  I'm the sysadmin at a small public library. Since I got here a few years ago, I've been trying to set up the network in a secure and simple way. Security is a little tricky; the staff and patron networks need to be separated, for security reasons. Even if I further isolated the public wireless, I'd still rather not trust the security of our public computers. However, the two networks also need to communicate; even if I set up enough VMs so they didn't share any servers, they need to use the same two printers at the very least. Currently, I'm solving this with some jerry-rigged commodity equipment. The patron network, linked together by switches, has a Windows server connected to it for DNS and DHCP and a DSL modem for a gateway. Also on the patron network is the WAN side of a Linksys router. This router is the "top" of the staff network, and has the same Windows server connected on a different port, providing DNS and DHCP, and another, faster DSL modem (separate connections are very useful, especially as we heavily depend on some cloud-hosted software). tl;dr: We have a public network, and a NATed staff network within it. My question is; is this really the best way to do this? The right equipment would likely make my job easier, but anything with more than four ports and even rudimentary management quickly becomes a heavy hit on our budget. (My original question was about an ungodly frustrating DHCP routing issue, but I thought I'd ask whether my network was broken rather than asking about the DHCP problem and being told my network was broken.)

  Read the article

• Bypassing SQUID on freebsd with PF

  - by epema

  I have PF+SQUID31 on FREEBSD-9.0, and I want to have some hosts(aka goodguys) to bypass the proxy, so that torrents are not logged. Also, I am not sure about transparent. It means that I dont have to configure proxy settings on the client side right? I have tried doing a redirect no rdr on $int_if inet proto {tcp,udp} from 192.168.1.233/32 to any However, no luck :( Here is a quick look of my conf files: SQUID /usr/local/etc/squid/squid.conf http_port 192.168.1.1:8080 transparent RC /etc/rc.conf: gateway_enable="YES" pf_enable="YES" pf_rules="/usr/local/etc/pf.conf" pflog_enable="YES" squid_enable="YES" I have squid31 installed from ports with SQUID_PF "Enable transparent proxying with PF" on PF /usr/loca/etc/pf.conf: int_if="re0" ext_if="bge0" localnet="{ 192.168.1.0/24 }" table <goodguys> const { "192.168.1.219", "192.168.1.233" } set block-policy drop set skip on lo0 scrub in all fragment reassemble scrub out all random-id max-mss 1440 block in on $ext_if pass out on $ext_if keep state block in on $int_if pass in on $int_if inet proto tcp from $int_if:network to $int_if port 8080 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 21 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 22 keep state pass in on $int_if inet proto udp from $int_if:network to $int_if port 53 keep state pass in on $int_if inet proto tcp from $int_if:network to any port { smtp, pop3 } keep state pass in on $int_if inet proto icmp from $int_if:network to $int_if keep state pass out on $int_if keep state What lines should I add in conf files? I am assuming that the problem is on the firewall(pf).

  Read the article

• Autodiscover service seems to reply with User Principal Name instead of email address

  - by Jeff McJunkin

  After this latest round of Windows updates (on 1/11/11, in fact) my Exchange 2007 server of course rebooted. This may have had the side effect of making any changes I'd inadvertently made take effect. Since then, the Autodiscover service in Exchange 2007 from Outlook 2007 seems to reply with the User Principal Name ([email protected] instead of [email protected]). I'm specifically seeing this from within the "Test Email AutoConfiguration" tool in Outlook (the UPN appears in the first text box labeled "E-mail") and when creating a new profile in Outlook. If I disregard the UPN and instead fill in my email address, Autodiscover works as expected and I can connect without issue. I've confirmed using ADSI Edit that the SMTP email address is properly set for my users. I even went a bit crazy and set the UPN to the email address using ADSI Edit. I've re-installed the Client Access role on the server in question. Exchange server is Server 2008, 64-bit of course. Clients are mostly XP 32-bit, though the issue happens from a Windows 7 machine as well.

  Read the article

• While loop read multiple lines from a grep

  - by Basil

  I'm writing a script in AIX 5.3 that will loop through the output of a df and check each volume against another config file. If the volume appears in the config file, it will set a flag which is needed later in the script. If my config file only has a single column and I use a for loop, this works perfectly. My problem, however, is that if I use a while read loop to populate more than one variable per line, any variables I set between the while and the done are discarded. For example, assuming the contents of /netapp/conf/ExcludeFile.conf are a bunch of lines containing two fields each: volName="myVolume" utilization=70 thresholdFlag=0 grep volName /netapp/conf/ExcludeFile.conf | while read vol threshold; do if [ $utilization -ge $threshold ] ; then thresholdFlag=1 fi done echo "$thresholdFlag" In this example, thresholdFlag will always be 0, even if the volume appears in the file and its utilization is greater than the threshold. I could have added an echo "setting thresholdFlag to 1" in there, see the echo, and it'll still echo a 0 at the end. Is there a clean way to do this? I think my while loop is being done in a subshell, and changes I make to variables in there are actually being made to local variables that are discarded after the done.

  Read the article

• Setting up a Network Bridge on Linux VM (Windows 7 Host)

  - by GrandAdmiral

  I would like to use NetEm to simulate a low bandwidth environment while testing an Internet-connected device. My plan is to setup a bridge in a Linux VM (Linux Mint 13) on a Windows 7 host. Unfortunately I'm having trouble setting up the bridge. Then I can use NetEm in the Linux VM to limit the bandwidth to an external device. I went with the following script: ifconfig eth0 0.0.0.0 promisc up ifconfig eth1 0.0.0.0 promisc up Then create the bridge and bring it up: brctl addbr br0 brctl setfd br0 0 brctl addif br0 eth0 brctl addif br0 eth1 dhclient br0 ifconfig br0 up When I run that script, I see the following warning: Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service smbd reload Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the reload(8) utility, e.g. reload smbd The device connecting to the bridge is able to obtain an IP Address, but it can only ping the IP Address of the bridge (both are 10.2.32.xx). Then after a few minutes, other parts of our network go down. I'm not sure why, but once I kill the bridge the network is fine. Is it possible to setup a network bridge in a Linux VM? Do I need to do something else with the dhclient br0 part of the script? By the way, I'm using VirtualBox. The wired connection is eth0 and the wireless connection is eth1. The wired connection is connecting to the device and the wireless connection is going to the network. Both adapters are set up as bridged adapters with promiscuous mode set to "allow all".

  Read the article

• Sun Grid Engine (SGE) / limiting simultaneous array job sub-tasks

  - by wfaulk

  I am installing a Sun Grid Engine environment and I have a scheduler limit that I can't quite figure out how to implement. My users will create array jobs that have hundreds of sub-tasks. I would like to be able to limit those jobs to only running a set number of tasks at the same time, independent of other jobs. Like I might have one array job that I want to run 20 tasks at a time, and another I want to run 50 tasks at a time, and yet another that I'm fine running without limit. It seems like this ought to be doable, but I can't figure it out. There's a max_aj_instances configuration option, but that appears to apply globally to all array jobs. I can't see any way to use consumable resources, as I'd need a "complex attribute" that is per-job, and that feature doesn't seem to exist. It didn't look like resource quotas would work, but now I'm not so sure of that. It says "A resource quota set defines a maximum resource quota for a particular job request", but it's unclear if an array job's sub-tasks' resource requests will be aggregated for the purposes of the resource quota. I'm going to play with this, but hopefully someone already knows outright.

  Read the article

• Find out when a system went down?

  - by Clinton Blackmore

  I have a Mac OS X 10.5 server, with a RAID set in it, that went down due to a power outage on Thursday, and the machine is not happily booting right now*. It is possible to find out when the machine went down, while not booted off the internal drive? (I'm booted off an external drive, waiting for the RAID sets to initialize.) Normally, I'd run last. The man page doesn't indicate that I can run it against a different startup volume. It looks possible to parse /var/log/utmpx, but I don't think it'd be worthwhile to try to do that from scratch for this one-off problem. * I'm still trying to figure out why it isn't happy, and may ask a follow-up question. Right now I can see that UserNotificationCenter crashed repeatedly early Thursday morning, and that securityd, mdworker, and ARDAgent crash shortly after startup [I think -- I want to verify when the box went up and down]. The login window does not come up right (I think it is crashing or not able to cope with a dead securityd). The box is supposed to be set to go down when the UPS tells it power is out; at the moment, I'm wondering if it went down, and turned back on multiple times! I sure hope not.

  Read the article

• apache using mod_auth_kerb always asks for the password twice

  - by DrStalker

  (Debian Squeeze) I'm trying to set apache up to use Kerberos authentication to allow AD users to log in. It is working, but prompts the user twice for a username and password, with the first time being ignored (no matter what is put it in.) Only the second prompt includes the AuthName string from the config (i.e.: the first windows is a generic username/password one, the second includes the title "Kerberos Login") I'm not worried about integrated windows authentication working at this stage, I just want users to be able to login with their AD account so we don't need to set up a second repository of user accounts. How do I fix this to eliminate that first useless prompt? The directives in the apache2.conf file: <Directory /var/www/kerberos> AuthType Kerberos AuthName "Kerberos Login" KrbMethodNegotiate On KrbMethodK5Passwd On KrbAuthRealms ONEVUE.COM.AU.LOCAL Krb5KeyTab /etc/krb5.keytab KrbServiceName HTTP/[email protected] require valid-user </Directory> krb5.conf: [libdefaults] default_realm = ONEVUE.COM.AU.LOCAL [realms] ONEVUE.COM.AU.LOCAL = { kdc = SYD01PWDC01.ONEVUE.COM.AU.LOCAL master_kdc = SYD01PWDC01.ONEVUE.COM.AU.LOCAL admin_server = SYD01PWDC01.ONEVUE.COM.AU.LOCAL default_domain = ONEVUE.COM.AU.LOCAL } [login] krb4_convert = true krb4_get_tickets = false The access log when accessing the secured directory (note the two seperate 401's) 192.168.10.115 - - [24/Aug/2012:15:52:01 +1000] "GET /kerberos/ HTTP/1.1" 401 710 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/21.0.1180.83 Safari/537.1" 192.168.10.115 - - [24/Aug/2012:15:52:06 +1000] "GET /kerberos/ HTTP/1.1" 401 680 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/21.0.1180.83 Safari/537.1" 192.168.10.115 - [email protected] [24/Aug/2012:15:52:10 +1000] "GET /kerberos/ HTTP/1.1" 200 375 "-" "Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.1 (KHTML, like Gecko) Chrome/21.0.1180.83 Safari/537.1" And one line in error.log [Fri Aug 24 15:52:06 2012] [error] [client 192.168.0.115] gss_accept_sec_context(2) failed: An unsupported mechanism was requested (, Unknown error)

  Read the article

• Permissions nightmare - tried all I know

  - by Ben

  Working on a new client's dev site, which is a wordpress install on a Plesk box. I have SSH root access, and FTP access through a separate account. What I've done so far Initially I couldn't make any changes to any files at all. The permissions on all the template files looked a little screwy (644), so I figured change them to allow group, and add myself to the group: CHMOD Recursive on the theme folder to set everything to 664 Quickly realised I'd broken it, set the folders to 755, kept files as 664 Ownership on all files is a mixture of root:root and 500:500 (there is no user nor group with the ID of 500 on the server). Added myself to the group 'root' so I could modify the files too The Problem This worked OK, in terms of being able to edit the existing files, so I began working. However, I can't upload to the directory, even having run CHOWN -R root:root templatefolder/ and being in the root group. I feel like I must be missing something obvious, and it's doing my head in. Questions: Files in the install owned by 500 with group 500 - I've looked in /etc/group and /etc/passwd and there is no user nor group with this ID. Is that left over from another developer's setup or the previous server (they moved recently)? Is being in the 'root' group enough, or do I need to own the theme folder as 'myftpuser' in order to upload and create new files? Like I say, I have edit access, so I got myself this far. I'm now questioning what to do next!

  Read the article

• CloudFront for dynamic content CDN

  - by Elad Lachmi

  I would like to use CF as a CDN for my entire site, including static and dynamic content. I have been using CF for static content for a while and I am very happy with the results. I am now doing POC of putting the web server completely behind CF. For the dynamic content I created a new distribution and set the origin to be my web server. Right now I'm looking to test the solution, so I have the web server on the original domain and the CF distribution on the amazon domain. This works with the exception of HTTPS urls and POST requests. For HTTPS requests, I see the requests are forwarded to the original site domain for now, but how will CF handle them when I move the distribution to the www cname? What configuration changes should I make so that CF forwards HTTPS requests to the origin? For POST requests, I want the post to be made to the origin server. Can I set this up in CF? Finally, the site has membership. Can I configure CF to pull all content from the origin if the user is logged in? Sorry for the long question. I'm a little lost and documentation for dynamic CF is still kind of scarce. Thank you!

  Read the article

• Issue with multiple bridging for KVM hosts

  - by Henry-Nicolas Tourneur

  I'm using KVM and libvirt on my host (Debian lenny) + 2 bridges per guest (one for mgmt, one for public traffic). That setup isn't stable at all, sometimes I can do pings to a management ip, sometimes not. I don't know if my bridging paramateres are correct, could you check ? or if there is anything wrong ... Please also note that interface on guest doesn't flap and that I got not logs on my host. Of course forwarding is enabled. iface eth3 inet manual auto bond0 iface bond0 inet manual slaves eth1 eth2 pre-up ip link set bond0 up down ip link set bond0 down auto br0 iface br0 inet static address 10.160.0.7 netmask 255.255.255.128 bridge_ports eth3 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto br0:1 iface br0:1 inet static address 10.160.0.9 netmask 255.255.255.128 auto br0:2 iface br0:2 inet static address 10.160.0.10 netmask 255.255.255.128 auto br1 iface br1 inet static address 217.4.40.242 netmask 255.255.255.240 gateway 217.4.40.241 pre-up /etc/network/firewall start bridge_ports bond0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off auto br1:1 iface br1:1 inet static address 217.4.40.252 netmask 255.255.255.240 auto br1:2 iface br1:2 inet static address 217.4.40.253 netmask 255.255.255.240

  Read the article

• Why java -version returning a different version than the one defined in JAVA_HOME?

  - by Shekhar

  I am trying to set JAVA_HOME in Ubuntu OS. I have copied jdk 1.7 in /usr/lib/jvm and set JAVA_HOME in /etc/profile file. Contents of /usr/lib/jvm folder are as follows : shekhar@ubuntu:~$ ls /usr/lib/jvm/ default-java java-1.6.0-openjdk java-6-openjdk java-6-openjdk-i386 jdk1.7.0_01 java-1.5.0-gcj-4.6 java-1.6.0-openjdk-i386 java-6-openjdk-common java-7-openjdk-i386 and last few lines of /etc/profile file are as follows : export JAVA_HOME=/usr/lib/jvm/jdk1.7.0_01 export PATH=$PATH:$JAVA_HOME/bin After finishing all this when I run java -version command I get following output : shekhar@ubuntu:~$ java -version java version "1.6.0_24" OpenJDK Runtime Environment (IcedTea6 1.11.4) (6b24-1.11.4-1ubuntu0.12.04.1) OpenJDK Server VM (build 20.0-b12, mixed mode) and when I run ls -lah command I get following output : shekhar@ubuntu:~$ ls -lah /usr/bin/java lrwxrwxrwx 1 root root 22 Sep 29 09:58 /usr/bin/java -> /etc/alternatives/java shekhar@ubuntu:~$ ls -lah /etc/alternatives/java lrwxrwxrwx 1 root root 45 Sep 29 09:58 /etc/alternatives/java -> /usr/lib/jvm/java-6-openjdk-i386/jre/bin/java Can anyone please tell me which thing I am missing? Why Ubuntu is still pointing to open jdk and not to my jdk 7? PS : I have seen this similar question and its answers but that question is related to Windows OS and not for Ubuntu so I am reposting this similar question for Ubuntu.

  Read the article

• Sending email to google apps mailbox via exim4

  - by Andrey

  I have a hosting server with several users. One of the customers decided to move his email account to google apps and added the corresponding MX records so he can receive email now. But when it comes to sending email from my server to those email addresses, they don't make it. I guess it's because exim still thinks these domains are local. That's what i see in logs (example.com is my domain, example.net is the customer's domain): 2010-06-02 14:55:37 1OJmXp-0006yh-UG <= [email protected] U=root P=local S=342 T="lsdjf" from <[email protected]> for [email protected] 2010-06-02 14:55:38 1OJmXp-0006yh-UG ** [email protected] F=<[email protected]> R=virtual_aliases: 2010-06-02 14:55:38 1OJmXq-0006yl-2A <= <> R=1OJmXp-0006yh-UG U=mail P=local S=1113 T="Mail delivery failed: returning message to sender" from <> for [email protected] 2010-06-02 14:55:38 1OJmXp-0006yh-UG Completed 2010-06-02 14:55:38 1OJmXq-0006yl-2A User 0 set for local_delivery transport is on the never_users list 2010-06-02 14:55:38 1OJmXq-0006yl-2A == [email protected] R=localuser T=local_delivery defer (-29): User 0 set for local_delivery transport is on the never_users list 2010-06-02 14:55:38 1OJmXq-0006yl-2A ** [email protected]: retry timeout exceeded 2010-06-02 14:55:38 1OJmXq-0006yl-2A [email protected]: error ignored 2010-06-02 14:55:38 1OJmXq-0006yl-2A Completed What should i do to fix that?

  Read the article

• All virtualhosts serving Apache default files

  - by tj111

  I'm trying to configure Apache as an in-network webserver, and am using the sites-available/sites-enabled feature as opposed to just static vhost files. I set up a couple VirtualHosts, all with a unique DocumentRoot, however request for all the VirtualHosts just serve up the "It's Working!" default file. I can't for the life of me figure out why it won't serve the content out of the correct directory. Here's the contents of the virtualhost directive files, let me know if I need to post more. default (note that apache renames this to 000-default in sites-enabled, so it's not an ordering issue) NameVirtualHost *:80 ServerName emp <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName emp DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> billmed <VirtualHost *:80> ServerName billmed.emp ServerRoot /home/empression/Projects/billmed/web/httpdocs <Directory "/home/empression/Projects/billmed/web/httpdocs"> Order Allow,Deny Allow from All </Directory> </VirtualHost> Note that I have DNS zones for both emp and billmed.emp, as well as entries in /etc/hosts. My ultimate goal is to set up this machine as an in-house webserver with a custom tld (emp), but progress has been pretty slow.

  Read the article

• Juniper SSG 5 VPN

  - by Ethabelle

  I have a host who set up our Juniper SSG 5 VPN with Firmware version-6.2.0r5.0 I've been trying to set up VPN on it using this guide: http://kb.juniper.net/InfoCenter/index?page=content&id=KB4094 I've followed the steps and on my Mac, whenever I try to connect using L2TP over IPSec I get the following error; Summary of Steps: Create User (give them L2TP auth ability), Create Group, Place User in Group, Create VPN Gateway, Create VPN, create IP Pool, change default L2TP settings, create Untrust Trust Policy. The L2TP-VPN server did not respond. Try reconnecting. If the problem continues, verify your settings and contact your Administrator. I looked in my Firewall's logs, but I don't even see anything under Reports Logs Events. I'm.. obviously missing something, I just don't know what I'm missing at this point. I'm just starting networking and this is sort of Step 101 and I'm getting annoyed and just want to throw up OpenVPN, but I've read that has problems with Juniper Firewalls. Hooray.

  Read the article

• How to create domain or router-level workgroup (dd-wrt micro)

  - by Anthony

  In Windows, is active directory required for using "Domain" instead of "workgroup"? Do I need to register a domain with a DNS provider like godaddy? What I really want to do is set up my home LAN so that everyone connecting to the main router (which is everyone, which is about 30 people) can see each other. I've tried having everyone use the same work group name, still hit or miss. I tried setting the domain name and host name on the router itself, still nothing. I've tried joining the domain name I set instead of work group, and I get an AD error. But ideally, everyone who is connected to the main router should simply just see each other and any shared folders. I've had this problem when I was not the network admin on other large LANs, and I've never been able to figure out why sometimes people disappear or never see each other. I'd really prefer using the native sharing functionality in the OS to setting up an internal FTP or Samba server, etc. Any sure-fire ways to fix this? (maybe an open source clone of AD?) Thanks!

  Read the article

• How to make Virtualbox, OpenVPN, and Win2008 Web R2 like one another?

  - by Aquitaine

  Back with web developer guy wearing net admin hat. Hopefully this is an easy one. We have two servers on a public network at a hosted facility. Server A is our public-facing web server and server B is our database server. Both are running Windows 2008 Server R2 Web Edition. We want Server B isolated from everything except Server A, such that anyone who has to connect to server B goes through the VPN on Server A. It's not perfect since we have no access to do this on the router side, but it's what we've got. We've set up VirtualBox and OpenVPN Access Server on Server A. It has one network interface set to 'NAT' mode, such that OpenVPN gets its IP at 10.0.2.x, and to connect to the OpenVPN interface, I go to the local IP for the Virtualbox network adapter, 192.168.56.x, which works as I configured the appropriate ports using VBoxManage. My question is, do I need to be using Bridged Networking and give the VPN server its own IP, or is there some way to tell the server (either Windows or the Virtualbox OpenVPN) that 'any public connection on the real external IP on port X should be directed to this internal LAN address of 192.168.1.x on port Y'? OpenVPN itself doesn't seem to be aware of the server's real external IP unless we put it in Bridged networking mode; is that necessary or advisable? We're without RRAS since this is Web edition, but I feel like what we're going for is pretty simple. Thanks! Aq

  Read the article

< Previous Page | 698 699 700 701 702 703 704 705 706 707 708 709  | Next Page >