Search Results

Search found 19134 results on 766 pages for 'support contract'.

Page 703/766 | < Previous Page | 699 700 701 702 703 704 705 706 707 708 709 710  | Next Page >

• How to get faster graphics in KVM? VNC is painfully slow with Haiku OS guest, Spice won't install and SDL doesn't work

  - by Don Quixote

  I've been coming up to speed on the Haiku operating system, an Open Source clone of BeOS 5 Pro. I'm using an Apple MacBook Pro as my development machine. Apple's BootCamp BIOS does not support more than four partitions on the internal hard drive. While I can set up extended and logical partitions, doing so will prevent any of the installed operating systems from booting. To run Haiku directly on the iron, I boot it off a USB stick. Using external storage is also helpful because I am perpetually out of filesystem space. While VirtualBox is documented to allow access to physical drives, I could not actually get it to work. Also VirtualBox can only use one of the host CPU's cores. While VB guests can be configured for more than one CPU, they are only emulated. A full build of the Haiku OS takes 4.5 under VB. I had the hope of reducing build times by using KVM instead, but it's not working nearly as well as VirtualBox did. The Linux Kernel Virtual Machine is broken in all manner of fundamental ways as seen from Haiku. But I'm a coder; maybe I could contribute to fixing some of those problems. The first problem I've got is that Haiku's video in virt-manager is quite painfully slow. When I drag Haiku windows around the desktop, they lag quite far behind where my mouse is. It's quite difficult to move a window to a precise position on the screen. Just imagine that the mouse was connected to the window title bar with a really stretchy spring. Also Haiku's mouse lags quite far behind where I have moved it. I found lots of Personal Package Archives that enable Spice from QEMU / KVM at the Ubuntu Personal Package Arhives. I tried a few of the PPAs but none of them worked; with one of them, the command "add-apt-repository" crashed with a traceback. There is a Wiki page about Spice, but it says that it only works on 64-bit. My Early 2006 MacBook Pro is 32-bit. Its Apple Model Identifier is MacBookPro1,1; these use Core Duos NOT Core 2 Duos. I don't mind building a source deb for 32-bit if I can expect it to work. Is there some reason that Spice should be 64-bit only? Does it need features of the x86_64 Instruction Set Architecture that x86 does not have? When I try using SDL from virt-manager, the configuration for Local SDL Window says "Xauth: /home/mike/.Xauthority". When I try to start my guest, virt-manager emits an error. When I Googled the error message, the usual solution was to make ~/.Xauthority readible. However, .Xauthorty does not exist in my home directory. Instead I have a $XAUTHORITY environment variable. There is no way to configure SDL in virt-manager to use $XAUTHORITY instead of ~/.Xauthority. Neither does it work to copy the value of $XAUTHORITY into the file. I am ready to scream, because I've been five fscking days trying to make KVM work for Haiku development. There is a whole lot more that is broken than the slow video. All I really want to do for now is speed up my full builds of Haiku by using "jam -j2" to use both cores in my CPU. I may try Xen next, but the last time I monkeyed with Xen it was far, far more broken than I am finding KVM to be. Just for now, I would be satisfied if there were some way to use my USB stick as a drive in VirtualBox. VB does allow me to configure /dev/sdb as a drive, but it always causes a fatal error when I try to launch the guest. Thank You For Any Advice You Can Give Me. -

  Read the article

• Planning in the Cloud - For Real

  - by jmorourke

  One of the hottest topics at Oracle OpenWorld 2012 this week is “the cloud”.  Over the past few years, Oracle has made major investments in cloud-based applications, including some acquisitions, and now has over 100 applications available through Oracle Cloud services.  At OpenWorld this week, Oracle announced seven new offerings delivered via the Oracle Cloud services platform, one of which is the Oracle Planning and Budgeting Cloud Service.  Based on Oracle Hyperion Planning, this service is the first of Oracle’s EPM applications to be to be offered in the Cloud.    This solution is targeted to organizations that are struggling with spreadsheets or legacy planning and budgeting applications, want to deploy a world class solution for financial planning and budgeting, but are constrained by IT resources and capital budgets. With the Oracle Planning and Budgeting Cloud Service, organizations can fast track their way to world-class financial planning, budgeting and forecasting – at cloud speed, with no IT infrastructure investments and with minimal IT resources. Oracle Hyperion Planning is a market-leading budgeting, planning and forecasting application that is used by over 3,300 organizations worldwide.  Prior to this announcement, Oracle Hyperion Planning was only offered on a license and maintenance basis.  It could be deployed on-premise, or hosted through Oracle On-Demand or third party hosting partners.  With this announcement, Oracle’s market-leading Hyperion Planning application will be available as a Cloud Service and through subscription-based pricing. This lowers the cost of entry and deployment for new customers and provides a scalable environment to support future growth. With this announcement, Oracle is the first major vendor to offer one of its core EPM applications as a cloud-based service.  Other major vendors have recently announced cloud-based EPM solutions, but these are only BI dashboards delivered via a cloud platform.   With this announcement Oracle is providing a market-leading, world-class financial budgeting, planning and forecasting as a cloud service, with the following advantages: ·                     Subscription-based pricing ·                     Available standalone or as an extension to Oracle Fusion Financials Cloud Service ·                     Implementation services available from Oracle and the Oracle Partner Network ·                     High scalability and performance ·                     Integrated financial reporting and MS Office interface ·                     Seamless integration with Oracle and non-Oracle transactional applications ·                     Provides customers with more options for their planning and budgeting deployment vs. strictly on-premise or cloud-only solution providers. The OpenWorld announcement of Oracle Planning and Budgeting Cloud Service is a preview announcement, with controlled availability expected in calendar year 2012.  For more information, check out the links below: Press Release Web site If you have any questions or need additional information, please feel free to contact me at [email protected].

  Read the article

• Blink-Data vs Instinct?

  - by Samantha.Y. Ma

  In his landmark bestseller Blink, well-known author and journalist Malcolm Gladwell explores how human beings everyday make seemingly instantaneous choices --in the blink of an eye--and how we “think without thinking.”  These situations actually aren’t as simple as they seem, he postulates; and throughout the book, Gladwell seeks answers to questions such as: 1.    What makes some people good at thinking on their feet and making quick spontaneous decisions?2.    Why do some people follow their instincts and win, while others consistently seem to stumble into error?3.    Why are some of the best decisions often those that are difficult to explain to others?In Blink, Gladwell introduces us to the psychologist who has learned to predict whether a marriage will last, based on a few minutes of observing a couple; the tennis coach who knows when a player will double-fault before the racket even makes contact with the ball; the antiquities experts who recognize a fake at a glance. Ultimately, Blink reveals that great decision makers aren't those who spend the most time deliberating or analyzing information, but those who focus on key factors among an overwhelming number of variables-- i.e., those who have perfected the art of "thin-slicing.” In Data vs. Instinct: Perfecting Global Sales Performance, a new report sponsored by Oracle, the Economist Intelligence Unit (EIU) explores the roles data and instinct play in decision-making by sales managers and discusses how sales executives can increase sales performance through more effective  territory planning and incentive/compensation strategies.If you are a sales executive, ask yourself this:  “Do you rely on knowledge (data) when you plan out your sales strategy?  If you rely on data, how do you ensure that your data sources are reliable, up-to-date, and complete?  With the emergence of social media and the proliferation of both structured and unstructured data, how do you know that you are applying your information/data correctly and in-context?  Three key findings in the report are:•    Six out of ten executives say they rely more on data than instinct to drive decisions. •    Nearly one half (48 percent) of incentive compensation plans do not achieve the desired results. •    Senior sales executives rely more on current and historical data than on forecast data. Strikingly similar to what Gladwell concludes in Blink, the report’s authors succinctly sum up their findings: "The best outcome is a combination of timely information, insightful predictions, and support data."Applying this insight is crucial to creating a sound sales plan that drives alignment and results.  In the area of sales performance management, “territory programs and incentive compensation continue to present particularly complex challenges in an increasingly globalized market," say the report’s authors. "It behooves companies to get a better handle on translating that data into actionable and effective plans." To help solve this challenge, CRM Oracle Fusion integrates forecasting, quotas, compensation, and territories into a single system.   For example, Oracle Fusion CRM provides a natural integration between territories, which define the sales targets (e.g., collection of accounts) for the sales force, and quotas, which quantify the sales targets. In fact, territory hierarchy is a core analytic dimension to slice and dice sales results, using sales analytics and alerts to help you identify where problems are occurring. This makes territoriesStart tapping into both data and instinct effectively today with Oracle Fusion CRM.   Here is a short video to provide you with a snapshot of how it can help you optimize your sales performance.  

  Read the article

• How much is a subscriber worth?

  - by Tom Lewin

  This year at Red Gate, we’ve started providing a way to back up SQL Azure databases and Azure storage. We decided to sell this as a service, instead of a product, which means customers only pay for what they use. Unfortunately for us, it makes figuring out revenue much trickier. With a product like SQL Compare, a customer pays for it, and it’s theirs for good. Sure, we offer support and upgrades, but, fundamentally, the sale is a simple, upfront transaction: we’ve made this product, you need this product, we swap product for money and everyone is happy. With software as a service, it isn’t that easy. The money and product don’t change hands up front. Instead, we provide a service in exchange for a recurring fee. We know someone buying SQL Compare will pay us $X, but we don’t know how long service customers will stay with us, or how much they will spend. How do we find this out? We use lifetime value analysis. What is lifetime value? Lifetime value, or LTV, is how much a customer is worth to the business. For Entrepreneurs has a brilliant write up that we followed to conduct our analysis. Basically, it all boils down to this equation: LTV = ARPU x ALC To make it a bit less of an alphabet-soup and a bit more understandable, we can write it out in full: The lifetime value of a customer equals the average revenue per customer per month, times the average time a customer spends with the service Simple, right? A customer is worth the average spend times the average stay. If customers pay on average $50/month, and stay on average for ten months, then a new customer will, on average, bring in $500 over the time they are a customer! Average spend is easy to work out; it’s revenue divided by customers. The problem comes when we realise that we don’t know exactly how long a customer will stay with us. How can we figure out the average lifetime of a customer, if we only have six months’ worth of data? The answer lies in the fact that: Average Lifetime of a Customer = 1 / Churn Rate The churn rate is the percentage of customers that cancel in a month. If half of your customers cancel each month, then your average customer lifetime is two months. The problem we faced was that we didn’t have enough data to make an estimate of one month’s cancellations reliable (because barely anybody cancels)! To deal with this data problem, we can take data from the last three months instead. This means we have more data to play with. We can still use the equation above, we just need to multiply the final result by three (as we worked out how many three month periods customers stay for, and we want our answer to be in months). Now these estimates are likely to be fairly unreliable; when there’s not a lot of data it pays to be cautious with inference. That said, the numbers we have look fairly consistent, and it’s super easy to revise our estimates when new data comes in. At the very least, these numbers give us a vague idea of whether a subscription business is viable. As far as Cloud Services goes, the business looks very viable indeed, and the low cancellation rates are much more than just data points in LTV equations; they show that the product is working out great for our customers, which is exactly what we’re looking for!

  Read the article

• Stepping outside Visual Studio IDE [Part 2 of 2] with Mono 2.6.4

  - by mbcrump

  Continuing part 2 of my Stepping outside the Visual Studio IDE, is the open-source Mono Project. Mono is a software platform designed to allow developers to easily create cross platform applications. Sponsored by Novell (http://www.novell.com/), Mono is an open source implementation of Microsoft's .NET Framework based on the ECMA standards for C# and the Common Language Runtime. A growing family of solutions and an active and enthusiastic contributing community is helping position Mono to become the leading choice for development of Linux applications. So, to clarify. You can use Mono to develop .NET applications that will run on Linux, Windows or Mac. It’s basically a IDE that has roots in Linux. Let’s first look at the compatibility: Compatibility If you already have an application written in .Net, you can scan your application with the Mono Migration Analyzer (MoMA) to determine if your application uses anything not supported by Mono. The current release version of Mono is 2.6. (Released December 2009) The easiest way to describe what Mono currently supports is: Everything in .NET 3.5 except WPF and WF, limited WCF. Here is a slightly more detailed view, by .NET framework version: Implemented C# 3.0 System.Core LINQ ASP.Net 3.5 ASP.Net MVC C# 2.0 (generics) Core Libraries 2.0: mscorlib, System, System.Xml ASP.Net 2.0 - except WebParts ADO.Net 2.0 Winforms/System.Drawing 2.0 - does not support right-to-left C# 1.0 Core Libraries 1.1: mscorlib, System, System.Xml ASP.Net 1.1 ADO.Net 1.1 Winforms/System.Drawing 1.1 Partially Implemented LINQ to SQL - Mostly done, but a few features missing WCF - silverlight 2.0 subset completed Not Implemented WPF - no plans to implement WF - Will implement WF 4 instead on future versions of Mono. System.Management - does not map to Linux System.EnterpriseServices - deprecated Links to documentation. The Official Mono FAQ’s Links to binaries. Mono IDE Latest Version is 2.6.4 That's it, nothing more is required except to compile and run .net code in Linux. Installation After landing on the mono project home page, you can select which platform you want to download. I typically pick the Virtual PC image since I spend all of my day using Windows 7. Go ahead and pick whatever version is best for you. The Virtual PC image comes with Suse Linux. Once the image is launch, you will see the following: I’m not going to go through each option but its best to start with “Start Here” icon. It will provide you with information on new projects or existing VS projects. After you get Mono installed, it's probably a good idea to run a quick Hello World program to make sure everything is setup properly. This allows you to know that your Mono is working before you try writing or running a more complex application. To write a "Hello World" program follow these steps: Start Mono Development Environment. Create a new Project: File->New->Solution Select "Console Project" in the category list. Enter a project name into the Project name field, for example, "HW Project". Click "Forward" Click “Packaging” then OK. You should have a screen very simular to a VS Console App. Click the "Run" button in the toolbar (Ctrl-F5). Look in the Application Output and you should have the “Hello World!” Your screen should look like the screen below. That should do it for a simple console app in mono. To test out an ASP.NET application, simply copy your code to a new directory in /srv/www/htdocs, then visit the following URL: http://localhost/directoryname/page.aspx where directoryname is the directory where you deployed your application and page.aspx is the initial page for your software. Databases You can continue to use SQL server database or use MySQL, Postgress, Sybase, Oracle, IBM’s DB2 or SQLite db. Conclusion I hope this brief look at the Mono IDE helps someone get acquainted with development outside of VS. As always, I welcome any suggestions or comments.

  Read the article

• Going by the eBook

  - by Tony Davis

  The book and magazine publishing world is rapidly going digital, and the industry is faced with making drastic changes to their ways of doing business. The sudden take-up of digital readers by the book-buying public has surprised even the most technological-savvy of the industry. Printed books just aren't selling like they did. In contrast, eBooks are doing well. The ePub file format is the standard around which all publishers are converging. ePub is a standard for formatting book content, so that it can be reflowed for various devices, with their widely differing screen-sizes, and can be read offline. If you unzip an ePub file, you'll find familiar formats such as XML, XHTML and CSS. This is both a blessing and a curse. Whilst it is good to be able to use familiar technologies that have been developed to a level of considerable sophistication, it doesn't get us all the way to producing a viable publication. XHTML is a page-description language, not a book-description language, as we soon found out during our initial experiments, when trying to specify headers, footers, indexes and chaptering. As a result, it is difficult to predict how any particular eBook application will decide to render a book. There isn't even a consensus as to how the cover image is specified. All of this is awkward for the publisher. Each book must be created and revised in a form from which can be generated a whole range of 'printed media', from print books, to Mobi for kindles, ePub for most Tablets and SmartPhones, HTML for excerpted chapters on websites, and a plethora of other formats for other eBook readers, each with its own idiosyncrasies. In theory, if we can get our content into a clean, semantic XML form, such as DOCBOOKS, we can, from there, after every revision, perform a series of relatively simple XSLT transformations to output anything from a HTML article, to an ePub file for reading on an iPad, to an ICML file (an XML-based file format supported by the InDesign tool), ready for print publication. As always, however, the task looks bigger the closer you get to the detail. On the way to the utopian world of an XML-based book format that encompasses all the diverse requirements of the different publication media, ePub looks like a reasonable format to adopt. Its forthcoming support for HTML 5 and CSS 3, with ePub 3.0, means that features, such as widow-and-orphan controls, multi-column flow and multi-media graphics can be incorporated into eBooks. This starts to make it possible to build an "app-like" experience into the eBook and to free publishers to think of putting context before container; to think of what content is required, be it graphical, textual or audio, from the point of view of the user, rather than what's possible in a given, traditional book "Container". In the meantime, there is a gap between what publishers require and what current technology can provide and, of course building this app-like experience is far from plain sailing. Real portability between devices is still a big challenge, and achieving the sort of wizardry seen in the likes of Theodore Grey's "Elements" eBook will require some serious device-specific programming skills. Cheers, Tony.

  Read the article

• USDM and Oracle Offer a New Part 11 Compliant Solution for Life Sciences

  - by Michael Snow

  Guest post today provided by Oracle partner, USDM  Regulated Content in WebCenterUSDM and Oracle offer a new Part 11 compliant solution for Life Sciences (White Paper) Life science customers now have the ability to take advantage of all of the benefits of Oracle’s WebCenter Content, a global leader in Enterprise Content Management.   For the past year, USDM has been developing best practice compliance solutions to meet regulated content management requirements for 21 CFR Part 11 in WebCenter Content. USDM has been an expert in ECM for life sciences since 1999 and in 2011, certified that WebCenter was a 21CFR Part 11 compliant content management platform (White Paper).  In addition, USDM has built Validation Accelerators Packs for WebCenter to enable life science organizations to quickly and cost effectively validate this world class solution.With the Part 11 certification, Oracle’s WebCenter now provides regulated life science organizations  the ability to manage REGULATORY content in WebCenter, as well as the ability to take advantage of ALL of the additional functionality of WebCenter, including  a complete, open, and integrated portfolio of portal, web experience management, content management and social networking technology.  Here are a few screen shot examples of Part 11 functionality included in the product: E-Sign, E-Sign Rendor, Meta Data History, Audit Trail Report, and Access Reporting. Gone are the days that life science companies have to spend millions of dollars a year to implement, maintain, and validate ECM systems that no longer meet the ever changing business and regulatory requirements.  Life science companies now have the ability to use WebCenter Content, an ECM system with a substantially lower cost of ownership and unsurpassed functionality.Oracle has been #1 in life sciences because of their ability to develop cost effective, easy-to-use, scalable solutions which help increase insight and efficiency to drive growth for their customers.  Adding a world class ECM solution to this product portfolio allows life science organizations the chance to get rid of costly ECM systems that no longer meet their needs and use WebCenter, part of the Oracle Fusion Technology stack, with their other leading enterprise applications.USDM provides:•    Expertise in Life Science ECM Business Processes•    Prebuilt Life Science Configuration in WebCenter •    Validation Accelerator Packs for WebCenterUSDM is very proud to support Oracle’s expanding commitment to Life Sciences…. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} For more information please contact:  [email protected] Oracle will be exhibiting at DIA 2012 in Philadelphia on June 25-27. Stop by our booth (#2825) to learn more about the advantages of a centralized ECM strategy and see the Oracle WebCenter Content solution, our 21 CFR Part 11 compliant content management platform.

  Read the article

• FBX Importer - Texture Name

  - by CmasterG

  I have a problem with the FBX SDK. I read in the data for the vertex position and the uv coordinates. It works fine, but now I want to read for each polygon to which texture it belongs, so that I can have models with multiple textures. Can anyone tell me how I can get the texture name (file name) for my polygon. My code to read in vertex position and uv coordinates is the following: int i, j, lPolygonCount = pMesh->GetPolygonCount(); FbxVector4* lControlPoints = pMesh->GetControlPoints(); int vertexId = 0; for (i = 0; i < lPolygonCount; i++) { int lPolygonSize = pMesh->GetPolygonSize(i); for (j = 0; j < lPolygonSize; j++) { int lControlPointIndex = pMesh->GetPolygonVertex(i, j); FbxVector4 pos = lControlPoints[lControlPointIndex]; current_model[vertex_index].x = pos.mData[0] - pivot_offset[0]; current_model[vertex_index].y = pos.mData[1] - pivot_offset[1]; current_model[vertex_index].z = pos.mData[2]- pivot_offset[2]; FbxVector4 vertex_normal; pMesh->GetPolygonVertexNormal(i,j, vertex_normal); current_model[vertex_index].nx = vertex_normal.mData[0]; current_model[vertex_index].ny = vertex_normal.mData[1]; current_model[vertex_index].nz = vertex_normal.mData[2]; //read in UV data FbxStringList lUVSetNameList; pMesh->GetUVSetNames(lUVSetNameList); //get lUVSetIndex-th uv set const char* lUVSetName = lUVSetNameList.GetStringAt(0); const FbxGeometryElementUV* lUVElement = pMesh->GetElementUV(lUVSetName); if(!lUVElement) continue; // only support mapping mode eByPolygonVertex and eByControlPoint if( lUVElement->GetMappingMode() != FbxGeometryElement::eByPolygonVertex && lUVElement->GetMappingMode() != FbxGeometryElement::eByControlPoint ) return; //index array, where holds the index referenced to the uv data const bool lUseIndex = lUVElement->GetReferenceMode() != FbxGeometryElement::eDirect; const int lIndexCount= (lUseIndex) ? lUVElement->GetIndexArray().GetCount() : 0; FbxVector2 lUVValue; //get the index of the current vertex in control points array int lPolyVertIndex = pMesh->GetPolygonVertex(i,j); //the UV index depends on the reference mode //int lUVIndex = lUseIndex ? lUVElement->GetIndexArray().GetAt(lPolyVertIndex) : lPolyVertIndex; int lUVIndex = pMesh->GetTextureUVIndex(i, j); lUVValue = lUVElement->GetDirectArray().GetAt(lUVIndex); current_model[vertex_index].tu = (float)lUVValue.mData[0]; current_model[vertex_index].tv = (float)lUVValue.mData[1]; vertex_index ++; } } float v1[3], v2[3], v3[3]; v1[0] = current_model[vertex_index - 3].x; v1[1] = current_model[vertex_index - 3].y; v1[2] = current_model[vertex_index - 3].z; v2[0] = current_model[vertex_index - 2].x; v2[1] = current_model[vertex_index - 2].y; v2[2] = current_model[vertex_index - 2].z; v3[0] = current_model[vertex_index - 1].x; v3[1] = current_model[vertex_index - 1].y; v3[2] = current_model[vertex_index - 1].z; collision_model->addTriangle(v1,v2,v3);

  Read the article

• Learn Many Languages

  - by Jeff Foster

  My previous blog, Deliberate Practice, discussed the need for developers to “sharpen their pencil” continually, by setting aside time to learn how to tackle problems in different ways. However, the Sapir-Whorf hypothesis, a contested and somewhat-controversial concept from language theory, seems to hold reasonably true when applied to programming languages. It states that: “The structure of a language affects the ways in which its speakers conceptualize their world.” If you’re constrained by a single programming language, the one that dominates your day job, then you only have the tools of that language at your disposal to think about and solve a problem. For example, if you’ve only ever worked with Java, you would never think of passing a function to a method. A good developer needs to learn many languages. You may never deploy them in production, you may never ship code with them, but by learning a new language, you’ll have new ideas that will transfer to your current “day-job” language. With the abundant choices in programming languages, how does one choose which to learn? Alan Perlis sums it up best. “A language that doesn‘t affect the way you think about programming is not worth knowing“ With that in mind, here’s a selection of languages that I think are worth learning and that have certainly changed the way I think about tackling programming problems. Clojure Clojure is a Lisp-based language running on the Java Virtual Machine. The unique property of Lisp is homoiconicity, which means that a Lisp program is a Lisp data structure, and vice-versa. Since we can treat Lisp programs as Lisp data structures, we can write our code generation in the same style as our code. This gives Lisp a uniquely powerful macro system, and makes it ideal for implementing domain specific languages. Clojure also makes software transactional memory a first-class citizen, giving us a new approach to concurrency and dealing with the problems of shared state. Haskell Haskell is a strongly typed, functional programming language. Haskell’s type system is far richer than C# or Java, and allows us to push more of our application logic to compile-time safety. If it compiles, it usually works! Haskell is also a lazy language – we can work with infinite data structures. For example, in a board game we can generate the complete game tree, even if there are billions of possibilities, because the values are computed only as they are needed. Erlang Erlang is a functional language with a strong emphasis on reliability. Erlang’s approach to concurrency uses message passing instead of shared variables, with strong support from both the language itself and the virtual machine. Processes are extremely lightweight, and garbage collection doesn’t require all processes to be paused at the same time, making it feasible for a single program to use millions of processes at once, all without the mental overhead of managing shared state. The Benefits of Multilingualism By studying new languages, even if you won’t ever get the chance to use them in production, you will find yourself open to new ideas and ways of coding in your main language. For example, studying Haskell has taught me that you can do so much more with types and has changed my programming style in C#. A type represents some state a program should have, and a type should not be able to represent an invalid state. I often find myself refactoring methods like this… void SomeMethod(bool doThis, bool doThat) { if (!(doThis ^ doThat)) throw new ArgumentException(“At least one arg should be true”); if (doThis) DoThis(); if (doThat) DoThat(); } …into a type-based solution, like this: enum Action { DoThis, DoThat, Both }; void SomeMethod(Action action) { if (action == Action.DoThis || action == Action.Both) DoThis(); if (action == Action.DoThat || action == Action.Both) DoThat(); } At this point, I’ve removed the runtime exception in favor of a compile-time check. This is a trivial example, but is just one of many ideas that I’ve taken from one language and implemented in another.

  Read the article

• Consumer Oriented Search In Oracle Endeca Information Discovery – Part 1

  - by Bob Zurek

  Information Discovery, a core capability of Oracle Endeca Information Discovery, enables business users to rapidly search, discover and navigate through a wide variety of big data including structured, unstructured and semi-structured data. One of the key capabilities, among many, that differentiate our solution from others in the Information Discovery market is our deep support for search across this growing amount of varied big data. Our method and approach is very different than classic simple keyword search that is found in may information discovery solutions. In this first part of a series on the topic of search, I will walk you through many of the key capabilities that go beyond the simple search box that you might experience in products where search was clearly an afterthought or attempt to catch up to our core capabilities in this area. Lets explore. The core data management solution of Oracle Endeca Information Discovery is the Endeca Server, a hybrid search-analytical database that his highly scalable and column-oriented in nature. We will talk in more technical detail about the capabilities of the Endeca Server in future blog posts as this post is intended to give you a feel for the deep search capabilities that are an integral part of the Endeca Server. The Endeca Server provides best-of-breed search features aw well as a new class of features that are the first to be designed around the requirement to bridge structured, semi-structured and unstructured big data. Some of the key features of search include type a heads, automatic alphanumeric spell corrections, positional search, Booleans, wildcarding, natural language, and category search and query classification dialogs. This is just a subset of the advanced search capabilities found in Oracle Endeca Information Discovery. Search is an important feature that makes it possible for business users to explore on the diverse data sets the Endeca Server can hold at any one time. The search capabilities in the Endeca server differ from other Information Discovery products with simple “search boxes” in the following ways: The Endeca Server Supports Exploratory Search.  Enterprise data frequently requires the user to explore content through an ad hoc dialog, with guidance that helps them succeed. This has implications for how to design search features. Traditional search doesn’t assume a dialog, and so it uses relevance ranking to get its best guess to the top of the results list. It calculates many relevance factors for each query, like word frequency, distance, and meaning, and then reduces those many factors to a single score based on a proprietary “black box” formula. But how can a business users, searching, act on the information that the document is say only 38.1% relevant? In contrast, exploratory search gives users the opportunity to clarify what is relevant to them through refinements and summaries. This approach has received consumer endorsement through popular ecommerce sites where guided navigation across a broad range of products has helped consumers better discover choices that meet their, sometimes undetermined requirements. This same model exists in Oracle Endeca Information Discovery. In fact, the Endeca Server powers many of the most popular e-commerce sites in the world. The Endeca Server Supports Cascading Relevance. Traditional approaches of search reduce many relevance weights to a single score. This means that if a result with a good title match gets a similar score to one with an exact phrase match, they’ll appear next to each other in a list. But a user can’t deduce from their score why each got it’s ranking, even though that information could be valuable. Oracle Endeca Information Discovery takes a different approach. The Endeca Server stratifies results by a primary relevance strategy, and then breaks ties within a strata by ordering them with a secondary strategy, and so on. Application managers get the explicit means to compose these strategies based on their knowledge of their own domain. This approach gives both business users and managers a deterministic way to set and understand relevance. Now that you have an understanding of two of the core search capabilities in Oracle Endeca Information Discovery, our next blog post on this topic will discuss more advanced features including set search, second-order relevance as well as an understanding of faceted search mechanisms that include queries and filters.  

  Read the article

• XNA Multiplayer Games and Networking

  - by JoshReuben

  ·        XNA communication must by default be lightweight – if you are syncing game state between players from the Game.Update method, you must minimize traffic. That game loop may be firing 60 times a second and player 5 needs to know if his tank has collided with any player 3 and the angle of that gun turret. There are no WCF ServiceContract / DataContract niceties here, but at the same time the XNA networking stack simplifies the details. The payload must be simplistic - just an ordered set of numbers that you would map to meaningful enum values upon deserialization.   Overview ·        XNA allows you to create and join multiplayer game sessions, to manage game state across clients, and to interact with the friends list ·        Dependency on Gamer Services - to receive notifications such as sign-in status changes and game invitations ·        two types of online multiplayer games: system link game sessions (LAN) and LIVE sessions (WAN). ·        Minimum dev requirements: 1 Xbox 360 console + Creators Club membership to test network code - run 1 instance of game on Xbox 360, and 1 on a Windows-based computer   Network Sessions ·        A network session is made up of players in a game + up to 8 arbitrary integer properties describing the session ·        create custom enums – (e.g. GameMode, SkillLevel) as keys in NetworkSessionProperties collection ·        Player state: lobby, in-play   Session Types ·        local session - for split-screen gaming - requires no network traffic. ·        system link session - connects multiple gaming machines over a local subnet. ·        Xbox LIVE multiplayer session - occurs on the Internet. Ranked or unranked   Session Updates ·        NetworkSession class Update method - must be called once per frame. ·        performs the following actions: o   Sends the network packets. o   Changes the session state. o   Raises the managed events for any significant state changes. o   Returns the incoming packet data. ·        synchronize the session à packet-received and state-change events à no threading issues   Session Config ·        Session host - gaming machine that creates the session. XNA handles host migration ·        NetworkSession properties: AllowJoinInProgress , AllowHostMigration ·        NetworkSession groups: AllGamers, LocalGamers, RemoteGamers   Subscribe to NetworkSession events ·        GamerJoined ·        GamerLeft ·        GameStarted ·        GameEnded – use to return to lobby ·        SessionEnded – use to return to title screen   Create a Session session = NetworkSession.Create(         NetworkSessionType.SystemLink,         maximumLocalPlayers,         maximumGamers,         privateGamerSlots,         sessionProperties );   Start a Session if (session.IsHost) {     if (session.IsEveryoneReady)     {        session.StartGame();        foreach (var gamer in SignedInGamer.SignedInGamers)        {             gamer.Presence.PresenceMode =                 GamerPresenceMode.InCombat;   Find a Network Session AvailableNetworkSessionCollection availableSessions = NetworkSession.Find(     NetworkSessionType.SystemLink,       maximumLocalPlayers,     networkSessionProperties); availableSessions.AllowJoinInProgress = true;   Join a Network Session NetworkSession session = NetworkSession.Join(     availableSessions[selectedSessionIndex]);   Sending Network Data var packetWriter = new PacketWriter(); foreach (LocalNetworkGamer gamer in session.LocalGamers) {     // Get the tank associated with this player.     Tank myTank = gamer.Tag as Tank;     // Write the data.     packetWriter.Write(myTank.Position);     packetWriter.Write(myTank.TankRotation);     packetWriter.Write(myTank.TurretRotation);     packetWriter.Write(myTank.IsFiring);     packetWriter.Write(myTank.Health);       // Send it to everyone.     gamer.SendData(packetWriter, SendDataOptions.None);     }   Receiving Network Data foreach (LocalNetworkGamer gamer in session.LocalGamers) {     // Keep reading while packets are available.     while (gamer.IsDataAvailable)     {         NetworkGamer sender;          // Read a single packet.         gamer.ReceiveData(packetReader, out sender);          if (!sender.IsLocal)         {             // Get the tank associated with this packet.             Tank remoteTank = sender.Tag as Tank;              // Read the data and apply it to the tank.             remoteTank.Position = packetReader.ReadVector2();             …   End a Session if (session.AllGamers.Count == 1)         {             session.EndGame();             session.Update();         }   Performance •        Aim to minimize payload, reliable in order messages •        Send Data Options: o   Unreliable, out of order -(SendDataOptions.None) o   Unreliable, in order (SendDataOptions.InOrder) o   Reliable, out of order (SendDataOptions.Reliable) o   Reliable, in order (SendDataOptions.ReliableInOrder) o   Chat data (SendDataOptions.Chat) •        Simulate: NetworkSession.SimulatedLatency , NetworkSession.SimulatedPacketLoss •        Voice support – NetworkGamer properties: HasVoice ,IsTalking , IsMutedByLocalUser

  Read the article

• It happens only at Devoxx ...

  - by arungupta

  After attending several Java conferences world wide, this was my very first time at Devoxx. Here are some items I found that happens only at Devoxx ... Pioneers of theater-style seating - This not only provides comfortable seating for each attendee but the screens are very clearly visible to everybody in the room. Intellectual level of attendees is very high - Read more explanation on the Java EE 6 lab blog. In short, a lab, 1/3 of the content delivered at Devoxx 2011, could not be completed at other developer days in more than 1/3 the time. Snack box for lunches - Even though this suits well to the healthy lifestyle of multiple-snacks-during-a-day style but leaves attendees hungry sooner in the day. The longer breaks before the next snack in the evening does not help at all. Fortunately, Azure cupcakes and Android ice creams turned out to be handy. I finally carried my own apple :-) Wrist band instead of lanyard - The good part about this is that once tied to your hand then you are less likely to forget in your room. But OTOH you are a pretty much a branded conference attendee all through out the city. It was cost effective as it costed 20c as opposed to 1 euro for the lanyard. Live streaming from theater #8 (the biggest room) on parleys.com All talks recorded and released on parleys.com over next year. This allows attendees to not to miss any session and watch replay at their own leisure. Stephan promised to start sharing the sessions by mid December this year. No need to pre-register for a session - This is true for most of the conferences but bigger rooms (+ overflow room for key sessions) provide sufficient space for all those who want to attend the session. And of course all sessions are available on parleys.com anyway! Community votes on whiteboard - Devoxx attendees gets a chance to vote on topics ranging from their favorite non-Java language, operating system, or love from Oracle. Captured pictures at the end of Day 2 are shown below. Movie on the last but one night - This year it was The Adventures of Tintin and was lots of fun. Fries with mayo - This is a typical Belgian thing. Guys going in ladies room to avoid the long queues ... wow! Tweet wall everywhere and I mean literally everywhere, in rooms, hallways, front desk, and other places. The tweet picking algorithm was not very clear as I never saw my tweet appear on the wall ;-) You can also watch it at wall.devoxx.com. Cozy speaker dinner with great food and wine List of parallel and upcoming sessions displayed on the screen - This makes the information more explicit with the attendees. REST API with multiple mobile clients - This API is also used by some other conferences as well. And there always is iphone.devoxx.com. Steering committee members were recognized multiple times. The committee members were clearly identifiable wearing red hoodies. The wireless SSID was intuitive "Devoxx" but hidden to avoid some crap from Microsoft Windows. All of 9000 addresses were used up most of the times with each attendee having multiple devices. A 1 GB fibre optic cable was stretched to Metropolis to support the required network bandwidth. Stephan is already planning to upgrade the equipment and have a better infrastructure next year. Free water, soda, juice in a cooler Kinect connected to TV screens so that attendees can use their hands to browse through the list of sesssions. #devoxxblog, #devoxxwomen, #devoxxfrance, #devoxxgreat, #devoxxsuggestions And Devoxx attendees are called Devoxxians ... how cool is that ? :-) What other things do you think happen only at Devoxx ? And now the pictures from the community whiteboard: And a more complete album (including bigger pics of community votes) is available below:

  Read the article

• Graphics trouble after resuming from hibernate or suspend

  - by Voyagerfan5761

  I have a Dell Inspiron 2650 (with NVidia graphics, using nouveau drivers) that I'm using to try out Ubuntu. It's all great, except that Hibernate and Suspend aren't usable. Yes, I know that questions about power-save issues are rampant in the Linux support universe, but it seems that every time I find a solution it's for a very specific hardware combination and doesn't apply to me. So anyway, here goes. When I resume from either power-saving mode, I'll get graphics problems anywhere on the range from a few scattered random-colored pixels that won't change; all the way to full-screen patterns that don't change as I move the mouse, hit keys on the keyboard, or even bring up the shutdown dialog using the power button. Those full-screen issues (which may involve stripes with random pixels, partial black screen, or both) always end in me forcing the machine to shut down by holding the power button. I haven't done much testing yet to determine what severity level is most commonly associated with each mode, but I do avoid using either power-save option because of these issues. I'll add info on my hardware as I can gather it (no home internet connection, and this laptop is tethered to my desk by a dead battery and casing degradation). Please feel free to request something specific in the question comments. Hardware Info See this hardinfo report for my system's hardware configuration. (No, my username is not "myuser"; I sanitized hardinfo's output before publishing it.) Screenshots These screenshots are from a relatively mild occurrence, which happened after the second hibernation I took that session. The first one worked great, though I used the wireless card and Firefox heavily between the two hibernation attempts. Take a look at what happened when I opened my home directory in Nautilus and scrolled it: See below for the situations I've tested so far. The real trouble comes when the machine resumes to an unusable state; in such cases I can't even unlock the screen or properly reboot, much less take a screenshot. I have a hunch that putting a CD in the drive will cause such major failures, and I will try that at some point; see related question. Situations Tested Maverick (10.10) Suspend Seems to suspend nicely with nothing running Seems to suspend nicely with flash drive plugged in On resume from suspend with no flash drive, Terminal and gedit running: Funky graphics on top of log output, then blank screen with pixelated cursor; no response to power button (normally will shutdown 60 seconds later) Hibernate Seems to hibernate nicely with nothing running Seems to hibernate nicely with a few apps (Terminal, Mouse preferences) running Seems to not hibernate when flash drive plugged in Seems to not hibernate when System Monitor is running Have encountered failed hibernation (after several hours and one successful hibernate/thaw cycle) with no external media connected and no programs running except normal background stuff Natty LiveCD (11.04_2010-12-22) When I tested it, Natty wouldn't stay logged in. It played part of the login sound and then [ OK ] appeared in the top right corner (white-on-black terminal text) for a few seconds. Then it kicked me back to the Unlock screen. It did that four times before I gave up and just tested suspend from the Unlock screen. Suspend Resumed to vertical gray and black lines 2px (?) wide, then shifted to vertical "jail bars" of black over a black screen with above-described random pixels and mouse pointer. No apparent response to input from mouse (clicking randomly). Keyboard and touchpad unrecognized.

  Read the article

• When row estimation goes wrong

  - by Dave Ballantyne

  Whilst working at a client site, I hit upon one of those issues that you are not sure if that this is something entirely new or a bug or a gap in your knowledge. The client had a large query that needed optimizing.  The query itself looked pretty good, no udfs, UNION ALL were used rather than UNION, most of the predicates were sargable other than one or two minor ones.  There were a few extra joins that could be eradicated and having fixed up the query I then started to dive into the plan. I could see all manor of spills in the hash joins and the sort operations,  these are caused when SQL Server has not reserved enough memory and has to write to tempdb.  A VERY expensive operation that is generally avoidable.  These, however, are a symptom of a bad row estimation somewhere else, and when that bad estimation is combined with other estimation errors, chaos can ensue. Working my way back down the plan, I found the cause, and the more I thought about it the more i came convinced that the optimizer could be making a much more intelligent choice. First step is to reproduce and I was able to simplify the query down a single join between two tables, Product and ProductStatus,  from a business point of view, quite fundamental, find the status of particular products to show if ‘active’ ,’inactive’ or whatever. The query itself couldn’t be any simpler The estimated plan looked like this: Ignore the “!” warning which is a missing index, but notice that Products has 27,984 rows and the join outputs 14,000. The actual plan shows how bad that estimation of 14,000 is : So every row in Products has a corresponding row in ProductStatus.  This is unsurprising, in fact it is guaranteed,  there is a trusted FK relationship between the two columns.  There is no way that the actual output of the join can be different from the input. The optimizer is already partly aware of the foreign key meta data, and that can be seen in the simplifiction stage. If we drop the Description column from the query: the join to ProductStatus is optimized out. It serves no purpose to the query, there is no data required from the table and the optimizer knows that the FK will guarantee that a matching row will exist so it has been removed. Surely the same should be applied to the row estimations in the initial example, right ?  If you think so, please upvote this connect item. So what are our options in fixing this error ? Simply changing the join to a left join will cause the optimizer to think that we could allow the rows not to exist. or a subselect would also work However, this is a client site, Im not able to change each and every query where this join takes place but there is a more global switch that will fix this error,  TraceFlag 2301. This is described as, perhaps loosely, “Enable advanced decision support optimizations”. We can test this on the original query in isolation by using the “QueryTraceOn” option and lo and behold our estimated plan now has the ‘correct’ estimation. Many thanks goes to Paul White (b|t) for his help and keeping me sane through this

  Read the article

• A developer&rsquo;s WBS &ndash; 3 factors of 5

  - by johndoucette

  As a development manager, I have requested work breakdown structures (WBS) many times from the dev leads. Everyone has their own approach and why it takes sometimes days to get this simple list is often frustrating. Here is a simple way to get that elusive WBS done in 30 minutes and have 125 items in your list – well, 126. The WBS is made up of parent-child entities representing the overall outcome of the project. At the bottom of the hierarchical list should be the task item that a developer would perform in support of the branch in the list or WBS. Because I work with different dev leads on every project, I always ask the “what time value would you like to see at the lowest task in order to assign it to a developer and ensure it gets done within the timeframe”. I am particular to a task being 8 hours. Some like 8 to 24 hours. Stay away from tasks defaulting to 1 week. The task becomes way to vague and hard to manage completeness, especially on short budgets. As a developer, your focus is identifying the tasks you to accomplish in order to deliver the product. As a project manager, you will take the developer's WBS and add all the “other stuff” like quality testing, meetings, documentation, transition to maintenance, etc… Start your exercise with the name of the product you are delivering as a result of the project. You should be able to represent what you are building and deploying with one to three words. Example; XYZ Public Website Middleware BizTalk Application The reason you start with that single identifier is to always see the list as the product. It helps during each of the next three passes. Now, choose 5 tasks which in their entirety represent the product you will be delivering and add them to list under the product name you created earlier; Public Website     Security     Sites     Infrastructure     Publishing     Creative Continue this concept of seeing the list as the complete picture and decompose it one more level. You should have 25 items. Public Website     Security         Authentication         Login Control         Administration         DRM         Workflow     Sites         Masterpages         Page Layouts         Web Parts (RIA, Multimedia)         Content Types         Structures     Infrastructure         ...     Publishing         ...     Creative         ... And one more time for a total of 125 items. The top item makes the list 126. Public Website     Security         Authentication             Install (AD/ADAM/LDAP/SQL)             Configuration             Management             Web App Configuration             Implement Provider         Login Control             Login Form             Login/Logoff             pw change             pw recover/forgot             email verification         Administration             ...         DRM             ...         Workflow             ...     Sites         Masterpages         Page Layouts         Web Parts (RIA, Multimedia)         Content Types         Structures     Infrastructure         ...     Publishing         ...     Creative         ... The next step is to make sure the task at the bottom of every branch represents the “time value” you planned for the project. You can add more to the WBS and of course if you can’t find 5 items, 4 is fine. If a task can be done in a fraction of the time value you determined for the project, try to roll it up into a larger task. In the task actions (later when the iteration is being planned), decompose the details back to the simple tasks. Now, go estimate!

  Read the article

• Need help partitioning when reinstalling Ubuntu 14.04

  - by Chris M.

  I upgraded to 14.04 about a month ago on my HP Mini netbook (about 16 GB hard disk). A few days ago the system crashed (I don't know why but I was using internet at the time). When I restarted the computer, Ubuntu would not load. Instead, I got a message from the BIOS saying Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key I took this to mean that I needed to reinstall 14.04. When I try to reinstall Ubuntu from the USB stick, I choose "Erase disk and install Ubuntu" but then I get a message: Some of the partitions you created are too small. Please make the following partitions at least this large: / 3.3 GB If you do not go back to the partitioner and increase the size of these partitions, the installation may fail. At first I hit Continue to see if it would install anyway, and it gave the message: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition # 1 (sda) at / failed. You may resume partitioning from the partitioning menu. The second time I hit Go Back, and it took me to the following partitioning table: Device Type Mount Point Format Size Used System /dev/sda /dev/sda1 ext4 (checked) 3228 MB Unknown /dev/sda5 swap (not checked) 1063 MB Unknown + - Change New Partition Table... Revert Device for boot loader installation: /dev/sda ATA JM Loader 001 (4.3 GB) At this point I'm not sure what to do. I've never partitioned my hard drive before and I don't want to screw things up. (I'm not particularly tech savvy.) Can you instruct me what I should do. (P.S. I'm afraid the table might not appear as I typed it in.) Results from fdisk: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 4294 MB, 4294967296 bytes 255 heads, 63 sectors/track, 522 cylinders, total 8388608 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 7860 MB, 7860125696 bytes 155 heads, 31 sectors/track, 3194 cylinders, total 15351808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009a565 Device Boot Start End Blocks Id System /dev/sdb1 * 2768 15351807 7674520 b W95 FAT32 ubuntu@ubuntu:~$ Here is what it displays when I open the Disks utility (I tried the screenshot terminal command you suggested but it didn't seem to do anything): 4.3 GB Hard Disk /dev/sda Model: JM Loader 001 (01000001) Size: 4.3 GB (4,294,967,296 bytes) Serial Number: 01234123412341234 Assessment: SMART is not supported Volumes Size: 4.3 GB (4,294,967,296 bytes) Device: /dev/sda Contents: Unknown (There is a button in the utility that when you click it gives the following options: Format... Create Disk Image... Restore Disk Image... Benchmark but SMART Data & Self-Tests... is dimmed out) When I hit F9 Change Boot Device Order, it shows the hard drive as: SATA:PM-JM Loader 001 When I hit F10 to get me into the BIOS Setup Utility, under Diagnostic it shows: Primary Hard Disk Self Test Not Support NetworkManager Tool State: disconnected Device: eth0 Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 00:26:55:B0:7F:0C Capabilities: Carrier Detect: yes Wired Properties Carrier: off When I run command lshw -C network, I get: WARNING: you should run this program as super-user. *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:16 memory:feafc000-feafffff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: c0 serial: 00:26:55:b0:7f:0c capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.1-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:43 memory:febc0000-febfffff ioport:ec80(size=128) WARNING: output may be incomplete or inaccurate, you should run this program as super-user.

  Read the article

• Access denied error while mounting a shared folder?

  - by SSH

  I am a linux newbie and I have a very basic question. I have three machines - machineA 10.108.24.132 machineB 10.108.24.133 machineC 10.108.24.134 and all those machines have Ubuntu 12.04 installed in it and I have root access to all those three machines. Now I am supposed to do below things in my above machines - Create mount point /opt/exhibitor/conf Mount the directory in all servers. sudo mount <NFS-SERVER>:/opt/exhibitor/conf /opt/exhibitor/conf/ I have already created /opt/exhibitor/conf directory in all those three machines as mentioned above. Now I am trying to create a Mount Point on all those three machines. So I followed the below process - Install NFS support files and NFS kernel server in all the above three machines $ sudo apt-get install nfs-common nfs-kernel-server Create the shared directory in all the above three machines $ mkdir /opt/exhibitor/conf/ Edited the /etc/exports and added the entry like this in all the above three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.*(rw) Run exportfs in all the above three machines root@machineA:/# exportfs -rv exportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "10.108.24.*:/opt/exhibitor/conf/". Assuming default behaviour ('no_subtree_check'). NOTE: this default has changed since nfs-utils version 1.0.x exporting 10.108.24.*:/opt/exhibitor/conf Now I did showmount on machineA root@machineA:/# showmount -e 10.108.24.132 Export list for 10.108.24.132: /opt/exhibitor/conf 10.108.24.* And also I have started the NFS server like this in all the above three machines - sudo /etc/init.d/nfs-kernel-server start And now when I did this, I am getting an error - root@machineA:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ mount.nfs: access denied by server while mounting 10.108.24.132:/opt/exhibitor/conf I have also tried doing the same thing from machineB and machineC as well and still I get the same error- root@machineB:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ root@machineC:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ Did my /etc/exports file looks good? As I have the same content in all the three machines. And also are there any logs related to NFS which I can see to find any clues? Any idea what wrong I am doing here? UPDATE:- So my etc/exports files would be like this in all the three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.132(rw) /opt/exhibitor/conf/ 10.108.24.133(rw) /opt/exhibitor/conf/ 10.108.24.134(rw) Just a quick check - The IP Address that I am taking for each machine as mentioned above is like this - root@machineB:/# ifconfig eth0 Link encap:Ethernet HWaddr 00:50:56:ad:5b:a7 inet addr:10.108.24.133 Bcast:10.108.27.255 Mask:255.255.252.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5696812 errors:0 dropped:12462 overruns:0 frame:0 TX packets:5083427 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7904369145 (7.9 GB) TX bytes:601844910 (601.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:187144 errors:0 dropped:0 overruns:0 frame:0 TX packets:187144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:24012302 (24.0 MB) TX bytes:24012302 (24.0 MB) Here the IP Address that I am taking for machineB is 10.108.24.133.

  Read the article

• Upcoming Carbon Tax in South Africa

  - by Evelyn Neumayr

  By Elena Avesani, Principal Product Strategy Manager, Oracle In 2012, the South Africa National Treasury announced the plan to impose a carbon tax to cut carbon emissions that are blamed for climate change. South Africa is ranked among the top 20 countries measured by absolute carbon dioxide emissions, with emissions per capita in the region of 10 metric tons per annum and over 90% of South Africa's energy produced by burning fossil fuels. The top 40 largest companies in the country are responsible for 207 million tons of carbon dioxide, directly emitting 20 percent of South Africa’s carbon output. The legislation, originally scheduled to be implemented from January 2015 to 31 December 2019, is now delayed to January 2016. It will levy a carbon tax of R120 (US$11) per ton of CO2, rising then by 10 percent a year until 2020, while all sectors bar electricity will be able to claim additional relief of at least 10 percent. The South African treasury proposed a 60 percent tax-free threshold on emissions for all sectors, including electricity, petroleum, iron, steel and aluminum. Oracle Environmental Accounting and Reporting (EA&R) supports these needs and guarantees consistency across organizations in how data is collected, retained, controlled, consolidated and used in calculating and reporting emissions inventory. EA&R also enables companies to develop an enterprise-wide data view that includes all 5 of the key sustainability categories: carbon emissions, energy, water, materials and waste. Thanks to its native integration with Oracle E-Business Suite and JD Edwards EnterpriseOne ERP Financials and Inventory Systems and the capability of capturing environmental data across business silos, Oracle Environmental Accounting and Reporting is uniquely positioned to support a strategic approach to carbon management that drives business value. Sources: Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} African Utility Week BDlive Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• SPTI problem with Mode Select

  - by Bob Murphy

  I'm running into a problem in which an attempt to do a "Mode Select" SCSI command using SPTI is returning an error status of 0x02 ("Check Condition"), and hope someone here might have some tips or suggestions. The code in question is intended to work with at a custom SCSI device. I wrote the original support for it using ASPI under WinXP, and am converting it to work with SPTI under 64-bit Windows 7. Here's the problematic code - and what's happening is, sptwb.spt.ScsiStatus is 2, which is a "Check Condition" error. Unfortunately, the device in question doesn't return useful information when you do a "Request Sense" after this problem occurs, so that's no help. void MSSModeSelect(const ModeSelectRequestPacket& inRequest, StatusResponsePacket& outResponse) { IPC_LOG("MSSModeSelect(): PathID=%d, TargetID=%d, LUN=%d", inRequest.m_Device.m_PathId, inRequest.m_Device.m_TargetId, inRequest.m_Device.m_Lun); int adapterIndex = inRequest.m_Device.m_PathId; HANDLE adapterHandle = prvOpenScsiAdapter(inRequest.m_Device.m_PathId); if (adapterHandle == INVALID_HANDLE_VALUE) { outResponse.m_Status = eScsiAdapterErr; return; } SCSI_PASS_THROUGH_WITH_BUFFERS sptwb; memset(&sptwb, 0, sizeof(sptwb)); #define MODESELECT_BUF_SIZE 32 sptwb.spt.Length = sizeof(SCSI_PASS_THROUGH); sptwb.spt.PathId = inRequest.m_Device.m_PathId; sptwb.spt.TargetId = inRequest.m_Device.m_TargetId; sptwb.spt.Lun = inRequest.m_Device.m_Lun; sptwb.spt.CdbLength = CDB6GENERIC_LENGTH; sptwb.spt.SenseInfoLength = 0; sptwb.spt.DataIn = SCSI_IOCTL_DATA_IN; sptwb.spt.DataTransferLength = MODESELECT_BUF_SIZE; sptwb.spt.TimeOutValue = 2; sptwb.spt.DataBufferOffset = offsetof(SCSI_PASS_THROUGH_WITH_BUFFERS,ucDataBuf); sptwb.spt.Cdb[0] = SCSIOP_MODE_SELECT; sptwb.spt.Cdb[4] = MODESELECT_BUF_SIZE; DWORD length = offsetof(SCSI_PASS_THROUGH_WITH_BUFFERS,ucDataBuf) + sptwb.spt.DataTransferLength; memset(sptwb.ucDataBuf, 0, sizeof(sptwb.ucDataBuf)); sptwb.ucDataBuf[2] = 0x10; sptwb.ucDataBuf[16] = (BYTE)0x01; ULONG bytesReturned = 0; BOOL okay = DeviceIoControl(adapterHandle, IOCTL_SCSI_PASS_THROUGH, &sptwb, sizeof(SCSI_PASS_THROUGH), &sptwb, length, &bytesReturned, FALSE); DWORD gle = GetLastError(); IPC_LOG(" DeviceIoControl() %s", okay ? "worked" : "failed"); if (okay) { outResponse.m_Status = (sptwb.spt.ScsiStatus == 0) ? eOk : ePrinterStatusErr; } else { outResponse.m_Status = eScsiPermissionsErr; } CloseHandle(adapterHandle); } A few more remarks, for what it's worth: This is derived from some old ASPI code that does the "Mode Select" flawlessly. This routine opens \\.\SCSI<whatever> at the beginning, via prvOpenScsiAdapter(), and closes the handle at the end. All the other routines for dealing with the device do the same thing, including the routine to do "Reserve Unit". Is this a good idea under SPTI, or should the call to "Reserve Unit" leave the handle open, so this routine and others in the sequence can use the same handle? This uses the IOCTL_SCSI_PASS_THROUGH. Should "Mode Select" use IOCTL_SCSI_PASS_THROUGH_DIRECT instead? Thanks in advance - any help will be greatly appreciated.

  Read the article

• Package management system corrupted. Cannot install or remove packages. U12.04LTS

  - by user271490

  Having read other posts, I believe that this may be less about samba than about update system. Below is the log file of the failed installation of Samba. I have been trying without success to install/outstall samba so that I could install anything else ... I cannot either install or remove samba using either update-manager or apt-get (nor indeed Software Centre). One of the errors that I have had to correct is the presence after "removal" (failed) of /usr/share/system-config-samba directory which finally allowed itself to be deleted. That, however was then ... I have U12.04LTS. running on release 63 because I allowed the upgrade to 64 this morning which fell over - no output to monitor - obviously even less support for my graphic chip than I am suffering already (see other posts in this forum). According to my interpretation of the dpkg returned errors there may be some problem with the package files, but if this is the case then it is on servers 'main', 'nantes uni fr' and 'best fr' at the very least if not everywhere. The suggestions offered at Package operation failed and elsewhere have not worked for me. This linked post suggests that a similar error is present in other packages, or that the error is in the 'update system' I have tried ... sudo apt-get remove samba ... autoremove ... install samba ... clean ... update -f all of the above In update-manager I have tried the "reload packages list" which fails to terminate because of the error. I have tried to install and remove samba from the software centre ... :( I am at a loss ... I need help, please! Firstly to recover my apt-get/update-manager/Software Centre so that I can at least carry on with my continuing installation - up to communicating with home network hence need for samba - which brings me to my second requirement ... samba. PS is the issue about "MaxReports" associated or apart? UPDATE! Being heartily sick of restarting FF every 5 seconds I thought I'd try again with Chromium ... and got the same errors from dpkg about corrupt compressed package - coincidence? Of course this was no longer in clipboard when I got here because apport has just errored ... AAARRRGGGH!!! Why does every error clear the clipboard? Thanks for any and all help!! installArchives() failed: Preconfiguring packages ... ... snip (Reading database ... ... snip (Reading database ... 184858 files and directories currently installed.) Unpacking samba (from .../samba_2%3a3.6.3-2ubuntu2.10_i386.deb) ... dpkg-deb (subprocess): data: internal gzip read error: ': data error' dpkg-deb: error: subprocess returned error exit status 2 dpkg: error processing /var/cache/apt/archives/samba_2%3a3.6.3-2ubuntu2.10_i386.deb (--unpack): subprocess dpkg-deb --fsys-tarfile returned error exit status 2 No apport report written because MaxReports is reached already Selecting previously unselected package system-config-samba. Unpacking system-config-samba (from .../system-config-samba_1.2.63-0ubuntu5_all.deb) ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for ufw ... Processing triggers for man-db ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for hicolor-icon-theme ... Errors were encountered while processing: /var/cache/apt/archives/samba_2%3a3.6.3-2ubuntu2.10_i386.deb Error in function: dpkg: dependency problems prevent configuration of system-config-samba: system-config-samba depends on samba; however: Package samba is not installed. dpkg: error processing system-config-samba (--configure): dependency problems - leaving unconfigured

  Read the article

• Where Twitter Stands Heading Into 2013

  - by Mike Stiles

  As Twitter continued throughout 2012 to be a stage on which global politics and culture played itself out, the company itself underwent some adjustments that give us a good indication of what users and brands can expect from the platform in 2013. The power of the network did anything but fade. Celebrities continued to use it to connect one-on-one. Even the Pope signed on this year. It continued to fuel revolutions. It played an exponentially large factor in this US Presidential election. And around the world, the freedom to speak was challenged as users were fired, sued, sometimes even jailed for their tweets. Expect more of the same in 2013, as Twitter has entrenched itself, for individuals, causes and brands, as the fastest, easiest, most efficient way to message the masses so some measure of impact can come from it. It’s changed everything, and it’s not finished. These fun facts reveal the position of strength with which Twitter enters 2013: It now generates a billion tweets every 2.5 days It has 500 million+ users The average Twitter user has tweeted 307 times 32% of everyone using the Internet uses Twitter It’s expected to bring in $540 million in ad revenue by 2014 11 new accounts are created every second High-level Executive Summary: people love it, people use it, and they’re going to keep loving and using it. Whether or not outside developers love it is a different matter. 2012 marked a shift from welcoming the third party support that played at least some role in Twitter being so warmly embraced, to discouraging anything that replicates what Twitter can do itself…or plans to do itself. It’s not the open playground it once was. Now Twitter must spend 2013 proving it can innovate in-house and keep us just as entranced. Likewise, Twitter is distancing itself from Facebook. Images from the #1 platform’s Instagram don’t work on Twitter anymore, and Twitter’s rolling out their own photo filter product. Where the two have lived in a “plenty of room for everybody” symbiosis up to now, 2013 could see the giants ramping up a full-on rivalry. Twitter is exhibiting a deliberate strategy. Updates have centered on more visually appealing search results, and making finding and sharing content easier. Deals have been cut with some media entities so their content stands out. CEO Dick Costolo has said tweets aren’t the attraction, they’re what leads you to content. Twitter aims to be a key distributor of media and info. Add the addition of former News Corp. President Peter Chernin to the board, and their hashtag landing page experience for events, and their media behemoth ambitions get pretty clear. There are challenges ahead and Costolo has also laid those out; entry into China, figuring out how to have Twitter deliver both comprehensive and relevant, targeted experiences, and the visualization of big data. What does this mean for corporations? They can expect a more media-rich evolution and growing emphases on imagery. They can expect more opportunities to create great media content and leverage Twitter for its distribution. And they can expect new ways to surface in searches. Are brands diving in? 56% of customer tweets to companies get completely and totally ignored. Ugh. A study Twitter recently conducted with Compete shows people who see tweets from retailers are more likely to buy a product. And, the more retailer tweets they see, the more likely they are to purchase on the retail site. As more of those tweets point to engaging media content from the brand, the results should get even better. Twitter appears ready for 2013. Enterprise brands have some work to do. @mikestilesPhoto Stuart Miles, freedigitalphotos.net

  Read the article

• C# 5 Async, Part 3: Preparing Existing code For Await

  - by Reed

  While the Visual Studio Async CTP provides a fantastic model for asynchronous programming, it requires code to be implemented in terms of Task and Task<T>.  The CTP adds support for Task-based asynchrony to the .NET Framework methods, and promises to have these implemented directly in the framework in the future.  However, existing code outside the framework will need to be converted to using the Task class prior to being usable via the CTP. Wrapping existing asynchronous code into a Task or Task<T> is, thankfully, fairly straightforward.  There are two main approaches to this. Code written using the Asynchronous Programming Model (APM) is very easy to convert to using Task<T>.  The TaskFactory class provides the tools to directly convert APM code into a method returning a Task<T>.  This is done via the FromAsync method.  This method takes the BeginOperation and EndOperation methods, as well as any parameters and state objects as arguments, and returns a Task<T> directly. For example, we could easily convert the WebRequest BeginGetResponse and EndGetResponse methods into a method which returns a Task<WebResponse> via: Task<WebResponse> task = Task.Factory .FromAsync<WebResponse>( request.BeginGetResponse, request.EndGetResponse, null); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Event-based Asynchronous Pattern (EAP) code can also be wrapped into a Task<T>, though this requires a bit more effort than the one line of code above.  This is handled via the TaskCompletionSource<T> class.  MSDN provides a detailed example of using this to wrap an EAP operation into a method returning Task<T>.  It demonstrates handling cancellation and exception handling as well as the basic operation of the asynchronous method itself. The basic form of this operation is typically: Task<YourResult> GetResultAsync() { var tcs = new TaskCompletionSource<YourResult>(); // Handle the event, and setup the task results... this.GetResultCompleted += (o,e) => { if (e.Error != null) tcs.TrySetException(e.Error); else if (e.Cancelled) tcs.TrySetCanceled(); else tcs.TrySetResult(e.Result); }; // Call the asynchronous method this.GetResult(); // Return the task from the TaskCompletionSource return tcs.Task; } We can easily use these methods to wrap our own code into a method that returns a Task<T>.  Existing libraries which cannot be edited can be extended via Extension methods.  The CTP uses this technique to add appropriate methods throughout the framework. The suggested naming for these methods is to define these methods as “Task<YourResult> YourClass.YourOperationAsync(…)”.  However, this naming often conflicts with the default naming of the EAP.  If this is the case, the CTP has standardized on using “Task<YourResult> YourClass.YourOperationTaskAsync(…)”. Once we’ve wrapped all of our existing code into operations that return Task<T>, we can begin investigating how the Async CTP can be used with our own code.

  Read the article

• Finding Leaders Breakfasts - Adelaide and Perth

  - by rdatson-Oracle

  HR Executives Breakfast Roundtables: Find the best leaders using science and social media! Perth, 22nd July & Adelaide, 24th July What is leadership in the 21st century? What does the latest research tell us about leadership? How do you recognise leadership qualities in individuals? How do you find individuals with these leadership qualities, hire and develop them? Join the Neuroleadership Institute, the Hay Group, and Oracle to hear: 1. the latest neuroscience research about human bias, and how it applies to finding and building better leaders; 2. the latest techniques to recognise leadership qualities in people; 3. and how you can harness your people and social media to find the best people for your company. Reflect on your hiring practices at this thought provoking breakfast, where you will be challenged to consider whether you are using best practices aimed at getting the right people into your company. Speakers Abigail Scott, Hay Group Abigail is a UK registered psychologist with 10 years international experience in the design and delivery of talent frameworks and assessments. She has delivered innovative assessment programmes across a range of organisations to identify and develop leaders. She is experienced in advising and supporting clients through new initiatives using evidence-based approach and has published a number of research papers on fairness and predictive validity in assessment. Karin Hawkins, NeuroLeadership Institute Karin is the Regional Director of NeuroLeadership Institute’s Asia-Pacific region. She brings over 20 years experience in the financial services sector delivering cultural and commercial results across a variety of organisations and functions. As a leadership risk specialist Karin understands the challenge of building deep bench strength in teams and she is able to bring evidence, insight, and experience to support executives in meeting today’s challenges. Robert Datson, Oracle Robert is a Human Capital Management specialist at Oracle, with several years as a practicing manager at IBM, learning and implementing latest management techniques for hiring, deploying and developing staff. At Oracle he works with clients to enable best practices for HR departments, and drawing the linkages between HR initiatives and bottom-line improvements. Agenda 07:30 a.m. Breakfast and Registrations 08:00 a.m. Welcome and Introductions 08:05 a.m. Breaking Bias in leadership decisions - Karin Hawkins 08:30 a.m. Identifying and developing leaders - Abigail Scott 08:55 a.m. Finding leaders, the social way - Robert Datson 09:20 a.m. Q&A and Closing Remarks 09:30 a.m. Event concludes If you are an employee or official of a government organisation, please click here for important ethics information regarding this event. To register for Perth, Tuesday 22nd July, please click HERE To register for Adelaide, Thursday 24th July, please click HERE 1024x768 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Contact: To register or have questions on the event? Contact Aaron Tait on +61 2 9491 1404

  Read the article

• Windows Phone 7 and WS-Trust

  - by Your DisplayName here!

  A question that I often hear these days is: “Can I connect a Windows Phone 7 device to my existing enterprise services?”. Well – since most of my services are typically issued token based, this requires support for WS-Trust and WS-Security on the client. Let’s see what’s necessary to write a WP7 client for this scenario. First I converted the Silverlight library that comes with the Identity Training Kit to WP7. Some things are not supported in WP7 WCF (like message inspectors and some client runtime hooks) – but besides that this was a simple copy+paste job. Very nice! Next I used the WSTrustClient to request tokens from my STS: private WSTrustClient GetWSTrustClient() {     var client = new WSTrustClient(         new WSTrustBindingUsernameMixed(),         new EndpointAddress("https://identity.thinktecture.com/…/issue.svc/mixed/username"),         new UsernameCredentials(_txtUserName.Text, _txtPassword.Password));     return client; } private void _btnLogin_Click(object sender, RoutedEventArgs e) {     _client = GetWSTrustClient();       var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Bearer)     {         AppliesTo = new EndpointAddress("https://identity.thinktecture.com/rp/")     };       _client.IssueCompleted += client_IssueCompleted;     _client.IssueAsync(rst); } I then used the returned RSTR to talk to the WCF service. Due to a bug in the combination of the Silverlight library and the WP7 runtime – symmetric key tokens seem to have issues currently. Bearer tokens work fine. So I created the following binding for the WCF endpoint specifically for WP7. <customBinding>   <binding name="mixedNoSessionBearerBinary">     <security authenticationMode="IssuedTokenOverTransport"               messageSecurityVersion="WSSecurity11 WSTrust13 WSSecureConversation13 WSSecurityPolicy12 BasicSecurityProfile10">       <issuedTokenParameters keyType="BearerKey" />     </security>     <binaryMessageEncoding />     <httpsTransport/>   </binding> </customBinding> The binary encoding is not necessary, but will speed things up a little for mobile devices. I then call the service with the following code: private void _btnCallService_Click(object sender, RoutedEventArgs e) {     var binding = new CustomBinding(         new BinaryMessageEncodingBindingElement(),         new HttpsTransportBindingElement());       _proxy = new StarterServiceContractClient(         binding,         new EndpointAddress("…"));     using (var scope = new OperationContextScope(_proxy.InnerChannel))     {         OperationContext.Current.OutgoingMessageHeaders.Add(new IssuedTokenHeader(Globals.RSTR));         _proxy.GetClaimsAsync();     } } works. download

  Read the article

• What Color is your Jetpack ?

  - by JoshReuben

  I’m a programmer, Im approaching 40, and I’m fairly decent at my job – I’ll keep doing what I’m doing for as long as they let me!   So what are your career options if you know how to code? A Programmer could be ..   An Algorithm developer Pros Interesting High barriers of entry, potential for startup competitive factor Cons Do you have the skill, qualifications? What are working conditions n this mystery niche ? micro-focus An Academic Pros Low pressure Job security – or is this an illusion ? Cons Low Pay Need a PhD A Software Architect Pros: strategic, rather than tactical Setting technology platform and high level vision You say how it should work, others have to figure out why its not working the way its supposed to ! broad view – you are paid to learn (how do you con people into paying for you to learn ??) Cons: Glorified developer – more often than not! competitive – everyone wants to do it ! loose touch with underlying tech in tough times, first guy to get the axe ! A Software Engineer Pros: interesting, always more to learn fun I can do it Fallback Cons: Nothing new under the sun – been there, done that Dealing with poor requirements, deadlines, other peoples code, overtime C#, XAML, Web - Low barriers of entry –> à race to the bottom A Team leader Pros: Setting code standards and proposing technology choices Cons: Glorified developer – more often than not! Inspecting other peoples code and debugging the problems they cannot fix Dealing with mugbies and prima donas Responsible for QA of others A Project Manager Pros No need for debugging other peoples code Cons Low barrier of entry High pressure Responsible for QA of others Loosing touch with technology A lot of bullshit meetings Have to be an asshole A Product Manager Pros No need for debugging other peoples code Learning new skillset of sales and marketing Cons Travel (I'm a family man) May need to know the bs details of an uninteresting product things I want to work with: AI, algorithms, Numerical Computing, Mathematica, C++ AMP – unfortunately, the work here is few & far between. VS & TFS Extensibility, DSLs (Workflow , Lightswitch), Code Generation – one day, code will write code ! Unity3D, WebGL – fun, fun, fun ! Modern Web – Knockout, SignalR, MVC, Node.Js ??? (tentative – I'll wait until things stabilize as this area is undergoing a pre-Cambrian explosion) Things I don’t want to work with: (but will if I'm asked to !) C# – same old, same old – not learning anything new here Old code – blech ! Environment with code & fix mentality , ad hoc requirements, excessive overtime Pc support, System administration – even after 20 years, people still ask you to do this sometimes ! debugging – my skills are just not there yet Oracle Old tech: VB 6, XSLT, WinForms, Net 3.51 or less Old style Web dev Information Systems: ASP.NET webforms, Reporting services / crystal reports, SQL Server CRUD with manual data layer, XAML MVVM – variations of the same concept, ad nauseaum. Low barriers of entry –> race to the bottom.  Metro – an elegant API coupled to a horrendous UX – I'll wait for market penetration viability before investing further in this.   Conclusion So if you are in a slump, take heart: Programming is a great career choice compared to every other job !

  Read the article

< Previous Page | 699 700 701 702 703 704 705 706 707 708 709 710  | Next Page >