Search Results

Search found 17816 results on 713 pages for 'variable names'.

Page 703/713 | < Previous Page | 699 700 701 702 703 704 705 706 707 708 709 710  | Next Page >

• The Product Owner

  - by Robert May

  In a previous post, I outlined the rules of Scrum.  This post details one of those rules. Picking a most important part of Scrum is difficult.  All of the rules are required, but if there were one rule that is “more” required that every other rule, its having a good Product Owner.  Simply put, the Product Owner can make or break the project. Duties of the Product Owner A Product Owner has many duties and responsibilities.  I’ll talk about each of these duties in detail below. A Product Owner: Discovers and records stories for the backlog. Prioritizes stories in the Product Backlog, Release Backlog and Iteration Backlog. Determines Release dates and Iteration Dates. Develops story details and helps the team understand those details. Helps QA to develop acceptance tests. Interact with the Customer to make sure that the product is meeting the customer’s needs. Discovers and Records Stories for the Backlog When I do Scrum, I always use User Stories as the means for capturing functionality that’s required in the system.  Some people will use Use Cases, but the same rule applies.  The Product Owner has the ultimate responsibility for figuring out what functionality will be in the system.  Many different mechanisms for capturing this input can be used.  User interviews are great, but all sources should be considered, including talking with Customer Support types.  Often, they hear what users are struggling with the most and are a great source for stories that can make the application easier to use. Care should be taken when soliciting user stories from technical types such as programmers and the people that manage them.  They will almost always give stories that are very technical in nature and may not have a direct benefit for the end user.  Stories are about adding value to the company.  If the stories don’t have direct benefit to the end user, the Product Owner should question whether or not the story should be implemented.  In general, technical stories should be included as tasks in User Stories.  Technical stories are often needed, but the ultimate value to the user is in user based functionality, so technical stories should be considered nothing more than overhead in providing that user functionality. Until the iteration prior to development, stories should be nothing more than short, one line placeholders. An exercise called Story Planning can be used to brainstorm and come up with stories.  I’ll save the description of this activity for another blog post. For more information on User Stories, please read the book User Stories Applied by Mike Cohn. Prioritizes Stories in the Product Backlog, Release Backlog and Iteration Backlog Prioritization of stories is one of the most difficult tasks that a Product Owner must do.  A key concept of Scrum done right is the need to have the team working from a single set of prioritized stories.  If the team does not have a single set of prioritized stories, Scrum will likely fail at your organization.  The Product Owner is the ONLY person who has the responsibility to prioritize that list.  The Product Owner must be very diplomatic and sincerely listen to the people around him so that he can get the priorities correct. Just listening will still not yield the proper priorities.  Care must also be taken to ensure that Return on Investment is also considered.  Ultimately, determining which stories give the most value to the company for the least cost is the most important factor in determining priorities.  Product Owners should be willing to look at cold, hard numbers to determine the order for stories.  Even when many people want a feature, if that features is costly to develop, it may not have as high of a return on investment as features that are cheaper, but not as popular. The act of prioritization often causes conflict in an environment.  Customer Service thinks that feature X is the most important, because it will stop people from calling.  Operations thinks that feature Y is the most important, because it will stop servers from crashing.  Developers think that feature Z is most important because it will make writing software much easier for them.  All of these are useful goals, but the team can have only one list of items, and each item must have a priority that is different from all other stories.  The Product Owner will determine which feature gives the best return on investment and the other features will have to wait their turn, which means that someone will not have their top priority feature implemented first. A weak Product Owner will refuse to do prioritization.  I’ve heard from multiple Product Owners the following phrase, “Well, it’s all got to be done, so what does it matter what order we do it in?”  If your product owner is using this phrase, you need a new Product Owner.  Order is VERY important.  In Scrum, every release is potentially shippable.  If the wrong priority items are developed, then the value added in each release isn’t what it should be.  Additionally, the Product Owner with this mindset doesn’t understand Agile.  A product is NEVER finished, until the company has decided that it is no longer a going concern and they are no longer going to sell the product.  Therefore, prioritization isn’t an event, its something that continues every day.  The logical extension of the phrase “It’s all got to be done” is that you will never ship your product, since a product is never “done.”  Once stories have been prioritized, assigning them to the Release Backlog and the Iteration Backlog becomes relatively simple.  The top priority items are copied into the respective backlogs in order and the task is complete.  The team does have the right to shuffle things around a little in the iteration backlog.  For example, they may determine that working on story C with story A is appropriate because they’re related, even though story B is technically a higher priority than story C.  Or they may decide that story B is too big to complete in the time available after Story A has tasks created, so they’ll work on Story C since it’s smaller.  They can’t, however, go deep into the backlog to pick stories to implement.  The team and the Product Owner should work together to determine what’s best for the company. Prioritization is time consuming, but its one of the most important things a Product Owner does. Determines Release Dates and Iteration Dates Product owners are responsible for determining release dates for a product.  A common misconception that Product Owners have is that every “release” needs to correspond with an actual release to customers.  This is not the case.  In general, releases should be no more than 3 months long.  You  may decide to release the product to the customers, and many companies do release the product to customers, but it may also be an internal release. If a release date is too far away, developers will fall into the trap of not feeling a sense of urgency.  The date is far enough away that they don’t need to give the release their full attention.  Additionally, important tasks, such as performance tuning, regression testing, user documentation, and release preparation, will not happen regularly, making them much more difficult and time consuming to do.  The more frequently you do these tasks, the easier they are to accomplish. The Product Owner will be a key participant in determining whether or not a release should be sent out to the customers.  The determination should be made on whether or not the features contained in the release are valuable enough  and complete enough that the customers will see real value in the release.  Often, some features will take more than three months to get them to a state where they qualify for a release or need additional supporting features to be released.  The product owner has the right to make this determination. In addition to release dates, the Product Owner also will help determine iteration dates.  In general, an iteration length should be chosen and the team should follow that iteration length for an extended period of time.  If the iteration length is changed every iteration, you’re not doing Scrum.  Iteration lengths help the team and company get into a rhythm of developing quality software.  Iterations should be somewhere between 2 and 4 weeks in length.  Any shorter, and significant software will likely not be developed.  Any longer, and the team won’t feel urgency and planning will become very difficult. Iterations may not be extended during the iteration.  Companies where Scrum isn’t really followed will often use this as a strategy to complete all stories.  They don’t want to face the harsh reality of what their true performance is, and looking good is more important than seeking visibility and improving the process and team.  Companies like this typically don’t allow failure.  This is unhealthy.  Failure is part of life and unless we learn from it, we can’t improve.  I would much rather see a team push out stories to the next iteration and then have healthy discussions about why they failed rather than extend the iteration and not deal with the core problems. If iteration length varies, retrospectives become more difficult.  For example, evaluating the performance of the team’s estimation efforts becomes much more difficult if the iteration length varies.  Also, the team must have a velocity measurement.  If the iteration length varies, measuring velocity becomes impossible and upper management no longer will have the ability to evaluate the teams performance.  People external to the team will no longer have the ability to determine when key features are likely to be developed.  Variable iterations cause the entire company to fail and likely cause Scrum to fail at an organization. Develops Story Details and Helps the Team Understand Those Details A key concept in Scrum is that the stories are nothing more than a placeholder for a conversation.  Stories should be nothing more than short, one line statements about the functionality.  The team will then converse with the Product Owner about the details about that story.  The product owner needs to have a very good idea about what the details of the story are and needs to be able to help the team understand those details. Too often, we see this requirement as being translated into the need for comprehensive documentation about the story, including old fashioned requirements documentation.  The team should only develop the documentation that is required and should not develop documentation that is only created because their is a process to do so. In general, what we see that works best is the iteration before a team starts development work on a story, the Product Owner, with other appropriate business analysts, will develop the details of that story.  They’ll figure out what business rules are required, potentially make paper prototypes or other light weight mock-ups, and they seek to understand the story and what is implied.  Note that the time allowed for this task is deliberately short.  The Product Owner only has a single iteration to develop all of the stories for the next iteration. If more than one iteration is used, I’ve found that teams will end up with Big Design Up Front and traditional requirements documents.  This is a waste of time, since the team will need to then have discussions with the Product Owner to figure out what the requirements document says.  Instead of this, skip making the pretty pictures and detailing the nuances of the requirements and build only what is minimally needed by the team to do development.  If something comes up during development, you can address it at that time and figure out what you want to do.  The goal is to keep things as light weight as possible so that everyone can move as quickly as possible. Helps QA to Develop Acceptance Tests In Scrum, no story can be counted until it is accepted by QA.  Because of this, acceptance tests are very important to the team.  In general, acceptance tests need to be developed prior to the iteration or at the very beginning of the iteration so that the team can make sure that the tasks that they develop will fulfill the acceptance criteria. The Product Owner will help the team, including QA, understand what will make the story acceptable.  Note that the Product Owner needs to be careful about specifying that the feature will work “Perfectly” at the end of the iteration.  In general, features are developed a little bit at a time, so only the bit that is being developed should be considered as necessary for acceptance. A weak Product Owner will make statements like “Do it right the first time.”  Not only are these statements damaging to the team (like they would try to do it WRONG the first time . . .), they’re also ignoring the iterative nature of Scrum.  Additionally, a weak product owner will seek to add scope in the acceptance testing.  For example, they will refuse to determine acceptance at the beginning of the iteration, and then, after the team has planned and committed to the iteration, they will expand scope by defining acceptance.  This often causes the team to miss the iteration because scope that wasn’t planned on is included.  There are ways that the team can mitigate this problem.  For example, include extra “Product Owner” time to deal with the uncertainty that you know will be introduced by the Product Owner.  This will slow the perceived velocity of the team and is not ideal, since they’ll be doing more work than they get credit for. Interact with the Customer to Make Sure that the Product is Meeting the Customer’s Needs Once development is complete, what the team has worked on should be put in front of real live people to see if it meets the needs of the customer.  One of the great things about Agile is that if something doesn’t work, we can revisit it in a future iteration!  This frees up the team to make the best decision now and know that if that decision proves to be incorrect, the team can revisit it and change that decision. Features are about adding value to the customer, so if the customer doesn’t find them useful, then having the team make tweaks is valuable.  In general, most software will be 80 to 90 percent “right” after the initial round and only minor tweaks are required.  If proper coding standards are followed, these tweaks are usually minor and easy to accomplish.  Product Owners that are doing a good job will encourage real users to see and use the software, since they know that they are trying to add value to the customer. Poor product owners will think that they know the answers already, that their customers are silly and do stupid things and that they don’t need customer input.  If you have a product owner that is afraid to show the team’s work to real customers, you probably need a different product owner. Up Next, “Who Makes a Good Product Owner.” Followed by, “Messing with the Team.” Technorati Tags: Scrum,Product Owner

  Read the article

• Windows Phone 7: Building a simple dictionary web client

  - by TechTwaddle

  Like I mentioned in this post a while back, I came across a dictionary web service called Aonaware that serves up word definitions from various dictionaries and is really easy to use. The services page on their website, http://services.aonaware.com/DictService/DictService.asmx, lists all the operations that are supported by the dictionary service. Here they are, Word Dictionary Web Service The following operations are supported. For a formal definition, please review the Service Description. Define Define given word, returning definitions from all dictionaries DefineInDict Define given word, returning definitions from specified dictionary DictionaryInfo Show information about the specified dictionary DictionaryList Returns a list of available dictionaries DictionaryListExtended Returns a list of advanced dictionaries (e.g. translating dictionaries) Match Look for matching words in all dictionaries using the given strategy MatchInDict Look for matching words in the specified dictionary using the given strategy ServerInfo Show remote server information StrategyList Return list of all available strategies on the server Follow the links above to get more information on each API. In this post we will be building a simple windows phone 7 client which uses this service to get word definitions for words entered by the user. The application will also allow the user to select a dictionary from all the available ones and look up the word definition in that dictionary. So of all the apis above we will be using only two, DictionaryList() to get a list of all supported dictionaries and DefineInDict() to get the word definition from a particular dictionary. Before we get started, a note to you all; I would have liked to implement this application using concepts from data binding, item templates, data templates etc. I have a basic understanding of what they are but, being a beginner, I am not very comfortable with those topics yet so I didn’t use them. I thought I’ll get this version out of the way and maybe in the next version I could give those a try. A somewhat scary mock-up of the what the final application will look like, Select Dictionary is a list picker control from the silverlight toolkit (you need to download and install the toolkit if you haven’t already). Below it is a textbox where the user can enter words to look up and a button beside it to fetch the word definition when clicked. Finally we have a textblock which occupies the remaining area and displays the word definition from the selected dictionary. Create a silverlight application for windows phone 7, AonawareDictionaryClient, and add references to the silverlight toolkit and the web service. From the solution explorer right on References and select Microsoft.Phone.Controls.Toolkit from under the .NET tab, Next, add a reference to the web service. Again right click on References and this time select Add Service Reference In the resulting dialog paste the service url in the Address field and press go, (url –> http://services.aonaware.com/DictService/DictService.asmx) once the service is discovered, provide a name for the NameSpace, in this case I’ve called it AonawareDictionaryService. Press OK. You can now use the classes and functions that are generated in the AonawareDictionaryClient.AonawareDictionaryService namespace. Let’s get the UI done now. In MainPage.xaml add a namespace declaration to use the toolkit controls, xmlns:toolkit="clr-namespace:Microsoft.Phone.Controls;assembly=Microsoft.Phone.Controls.Toolkit" the content of LayoutRoot is changed as follows, (sorry, no syntax highlighting in this post) <StackPanel x:Name="TitlePanel" Grid.Row="0" Margin="12,5,0,5">     <TextBlock x:Name="ApplicationTitle" Text="AONAWARE DICTIONARY CLIENT" Style="{StaticResource PhoneTextNormalStyle}"/>     <!--<TextBlock x:Name="PageTitle" Text="page name" Margin="9,-7,0,0" Style="{StaticResource PhoneTextTitle1Style}"/>--> </StackPanel> <!--ContentPanel - place additional content here--> <Grid x:Name="ContentPanel" Grid.Row="1" Margin="12,0,12,0">     <Grid.RowDefinitions>         <RowDefinition Height="Auto"/>         <RowDefinition Height="Auto"/>         <RowDefinition Height="*"/>     </Grid.RowDefinitions>     <toolkit:ListPicker Grid.Column="1" x:Name="listPickerDictionaryList"                         Header="Select Dictionary :">     </toolkit:ListPicker>     <Grid Grid.Row="1" Margin="0,5,0,0">         <Grid.ColumnDefinitions>             <ColumnDefinition Width="*"/>             <ColumnDefinition Width="Auto" />         </Grid.ColumnDefinitions>         <TextBox x:Name="txtboxInputWord" Grid.Column="0" GotFocus="OnTextboxInputWordGotFocus" />         <Button x:Name="btnGo" Grid.Column="1" Click="OnButtonGoClick" >             <Button.Content>                 <Image Source="/images/button-go.png"/>             </Button.Content>         </Button>     </Grid>     <ScrollViewer Grid.Row="2" x:Name="scrollViewer">         <TextBlock  Margin="12,5,12,5"  x:Name="txtBlockWordMeaning" HorizontalAlignment="Stretch"                    VerticalAlignment="Stretch" TextWrapping="Wrap"                    FontSize="26" />     </ScrollViewer> </Grid> I have commented out the PageTitle as it occupies too much valuable space, and the ContentPanel is changed to contain three rows. First row contains the list picker control, second row contains the textbox and the button, and the third row contains a textblock within a scroll viewer. The designer will now be showing the final ui, Now go to MainPage.xaml.cs, and add the following namespace declarations, using Microsoft.Phone.Controls; using AonawareDictionaryClient.AonawareDictionaryService; using System.IO.IsolatedStorage; A class called DictServiceSoapClient would have been created for you in the background when you added a reference to the web service. This class functions as a wrapper to the services exported by the web service. All the web service functions that we saw at the start can be access through this class, or more precisely through an object of this class. Create a data member of type DictServiceSoapClient in the Mainpage class, and a function which initializes it, DictServiceSoapClient DictSvcClient = null; private DictServiceSoapClient GetDictServiceSoapClient() {     if (null == DictSvcClient)     {         DictSvcClient = new DictServiceSoapClient();     }     return DictSvcClient; } We have two major tasks remaining. First, when the application loads we need to populate the list picker with all the supported dictionaries and second, when the user enters a word and clicks on the arrow button we need to fetch the word’s meaning. Populating the List Picker In the OnNavigatingTo event of the MainPage, we call the DictionaryList() api. This can also be done in the OnLoading event handler of the MainPage; not sure if one has an advantage over the other. Here’s the code for OnNavigatedTo, protected override void OnNavigatedTo(System.Windows.Navigation.NavigationEventArgs e) {     DictServiceSoapClient client = GetDictServiceSoapClient();     client.DictionaryListCompleted += new EventHandler<DictionaryListCompletedEventArgs>(OnGetDictionaryListCompleted);     client.DictionaryListAsync();     base.OnNavigatedTo(e); } Windows Phone 7 supports only async calls to web services. When we added a reference to the dictionary service, asynchronous versions of all the functions were generated automatically. So in the above function we register a handler to the DictionaryListCompleted event which will occur when the call to DictionaryList() gets a response from the server. Then we call the DictionaryListAsynch() function which is the async version of the DictionaryList() api. The result of this api will be sent to the handler OnGetDictionaryListCompleted(), void OnGetDictionaryListCompleted(object sender, DictionaryListCompletedEventArgs e) {     IsolatedStorageSettings settings = IsolatedStorageSettings.ApplicationSettings;     Dictionary[] listOfDictionaries;     if (e.Error == null)     {         listOfDictionaries = e.Result;         PopulateListPicker(listOfDictionaries, settings);     }     else if (settings.Contains("SavedDictionaryList"))     {         listOfDictionaries = settings["SavedDictionaryList"] as Dictionary[];         PopulateListPicker(listOfDictionaries, settings);     }     else     {         MessageBoxResult res = MessageBox.Show("An error occured while retrieving dictionary list, do you want to try again?", "Error", MessageBoxButton.OKCancel);         if (MessageBoxResult.OK == res)         {             GetDictServiceSoapClient().DictionaryListAsync();         }     }     settings.Save(); } I have used IsolatedStorageSettings to store a few things; the entire dictionary list and the dictionary that is selected when the user exits the application, so that the next time when the user starts the application the current dictionary is set to the last selected value. First we check if the api returned any error, if the error object is null e.Result will contain the list (actually array) of Dictionary type objects. If there was an error, we check the isolated storage settings to see if there is a dictionary list stored from a previous instance of the application and if so, we populate the list picker based on this saved list. Note that in this case there are chances that the dictionary list might be out of date if there have been changes on the server. Finally, if none of these cases are true, we display an error message to the user and try to fetch the list again. PopulateListPicker() is passed the array of Dictionary objects and the settings object as well, void PopulateListPicker(Dictionary[] listOfDictionaries, IsolatedStorageSettings settings) {     listPickerDictionaryList.Items.Clear();     foreach (Dictionary dictionary in listOfDictionaries)     {         listPickerDictionaryList.Items.Add(dictionary.Name);     }     settings["SavedDictionaryList"] = listOfDictionaries;     string savedDictionaryName;     if (settings.Contains("SavedDictionary"))     {         savedDictionaryName = settings["SavedDictionary"] as string;     }     else     {         savedDictionaryName = "WordNet (r) 2.0"; //default dictionary, wordnet     }     foreach (string dictName in listPickerDictionaryList.Items)     {         if (dictName == savedDictionaryName)         {             listPickerDictionaryList.SelectedItem = dictName;             break;         }     }     settings["SavedDictionary"] = listPickerDictionaryList.SelectedItem as string; } We first clear all the items from the list picker, add the dictionary names from the array and then create a key in the settings called SavedDictionaryList and store the dictionary list in it. We then check if there is saved dictionary available from a previous instance, if there is, we set it as the selected item in the list picker. And if not, we set “WordNet ® 2.0” as the default dictionary. Before returning, we save the selected dictionary in the “SavedDictionary” key of the isolated storage settings. Fetching word definitions Getting this part done is very similar to the above code. We get the input word from the textbox, call into DefineInDictAsync() to fetch the definition and when DefineInDictAsync completes, we get the result and display it in the textblock. Here is the handler for the button click, private void OnButtonGoClick(object sender, RoutedEventArgs e) {     txtBlockWordMeaning.Text = "Please wait..";     IsolatedStorageSettings settings = IsolatedStorageSettings.ApplicationSettings;     if (txtboxInputWord.Text.Trim().Length <= 0)     {         MessageBox.Show("Please enter a word in the textbox and press 'Go'");     }     else     {         Dictionary[] listOfDictionaries = settings["SavedDictionaryList"] as Dictionary[];         string selectedDictionary = listPickerDictionaryList.SelectedItem.ToString();         string dictId = "wn"; //default dictionary is wordnet (wn is the dict id)         foreach (Dictionary dict in listOfDictionaries)         {             if (dict.Name == selectedDictionary)             {                 dictId = dict.Id;                 break;             }         }         DictServiceSoapClient client = GetDictServiceSoapClient();         client.DefineInDictCompleted += new EventHandler<DefineInDictCompletedEventArgs>(OnDefineInDictCompleted);         client.DefineInDictAsync(dictId, txtboxInputWord.Text.Trim());     } } We validate the input and then select the dictionary id based on the currently selected dictionary. We need the dictionary id because the api DefineInDict() expects the dictionary identifier and not the dictionary name. We could very well have stored the dictionary id in isolated storage settings too. Again, same as before, we register a event handler for the DefineInDictCompleted event and call the DefineInDictAsync() method passing in the dictionary id and the input word. void OnDefineInDictCompleted(object sender, DefineInDictCompletedEventArgs e) {     WordDefinition wd = e.Result;     scrollViewer.ScrollToVerticalOffset(0.0f);     if (wd.Definitions.Length == 0)     {         txtBlockWordMeaning.Text = String.Format("No definitions were found for '{0}' in '{1}'", txtboxInputWord.Text.Trim(), listPickerDictionaryList.SelectedItem.ToString().Trim());     }     else     {         foreach (Definition def in wd.Definitions)         {             string str = def.WordDefinition;             str = str.Replace("  ", " "); //some formatting             txtBlockWordMeaning.Text = str;         }     } } When the api completes, e.Result will contain a WordDefnition object. This class is also generated in the background while adding the service reference. We check the word definitions within this class to see if any results were returned, if not, we display a message to the user in the textblock. If a definition was found the text on the textblock is set to display the definition of the word. Adding final touches, we now need to save the current dictionary when the application exits. A small but useful thing is selecting the entire word in the input textbox when the user selects it. This makes sure that if the user has looked up a definition for a really long word, he doesn’t have to press ‘clear’ too many times to enter the next word, protected override void OnNavigatingFrom(System.Windows.Navigation.NavigatingCancelEventArgs e) {     IsolatedStorageSettings settings = IsolatedStorageSettings.ApplicationSettings;     settings["SavedDictionary"] = listPickerDictionaryList.SelectedItem as string;     settings.Save();     base.OnNavigatingFrom(e); } private void OnTextboxInputWordGotFocus(object sender, RoutedEventArgs e) {     TextBox txtbox = sender as TextBox;     if (txtbox.Text.Trim().Length > 0)     {         txtbox.SelectionStart = 0;         txtbox.SelectionLength = txtbox.Text.Length;     } } OnNavigatingFrom() is called whenever you navigate away from the MainPage, since our application contains only one page that would mean that it is exiting. I leave you with a short video of the application in action, but before that if you have any suggestions on how to make the code better and improve it please do leave a comment. Until next time…

  Read the article

• EM12c Release 4: New Compliance features including DB STIG Standard

  - by DaveWolf

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Enterprise Manager’s compliance framework is a powerful and robust feature that provides users the ability to continuously validate their target configurations against a specified standard. Enterprise Manager’s compliance library is filled with a wide variety of standards based on Oracle’s recommendations, best practices and security guidelines. These standards can be easily associated to a target to generate a report showing its degree of conformance to that standard. ( To get an overview of  Database compliance management in Enterprise Manager see this screenwatch. ) Starting with release 12.1.0.4 of Enterprise Manager the compliance library will contain a new standard based on the US Defense Information Systems Agency (DISA) Security Technical Implementation Guide (STIG) for Oracle Database 11g. According to the DISA website, “The STIGs contain technical guidance to ‘lock down’ information systems/software that might otherwise be vulnerable to a malicious computer attack.” In essence, a STIG is a technical checklist an administrator can follow to secure a system or software. Many US government entities are required to follow these standards however many non-US government entities and commercial companies base their standards directly or partially on these STIGs. You can find more information about the Oracle Database and other STIGs on the DISA website. The Oracle Database 11g STIG consists of two categories of checks, installation and instance. Installation checks focus primarily on the security of the Oracle Home while the instance checks focus on the configuration of the running database instance itself. If you view the STIG compliance standard in Enterprise Manager, you will see the rules organized into folders corresponding to these categories. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The rule names contain a rule ID ( DG0020 for example ) which directly map to the check name in the STIG checklist along with a helpful brief description. The actual description field contains the text from the STIG documentation to aid in understanding the purpose of the check. All of the rules have also been documented in the Oracle Database Compliance Standards reference documentation. In order to use this standard both the OMS and agent must be at version 12.1.0.4 as it takes advantage of several features new in this release including: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Agent-Side Compliance Rules Manual Compliance Rules Violation Suppression Additional BI Publisher Compliance Reports /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Agent-Side Compliance Rules Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Agent-side compliance rules are essentially the result of a tighter integration between Configuration Extensions and Compliance Rules. If you ever created customer compliance content in past versions of Enterprise Manager, you likely used Configuration Extensions to collect additional information into the EM repository so it could be used in a Repository compliance rule. This process although powerful, could be confusing to correctly model the SQL in the rule creation wizard. With agent-side rules, the user only needs to choose the Configuration Extension/Alias combination and that’s it. Enterprise Manager will do the rest for you. This tighter integration also means their lifecycle is managed together. When you associate an agent-side compliance standard to a target, the required Configuration Extensions will be deployed automatically for you. The opposite is also true, when you unassociated the compliance standard, the Configuration Extensions will also be undeployed. The Oracle Database STIG compliance standard is implemented as an agent-side standard which is why you simply need to associate the standard to your database targets without previously deploying the associated Configuration Extensions. You can learn more about using Agent-Side compliance rules in the screenwatch Using Agent-Side Compliance Rules on Enterprise Manager's Lifecycle Management page on OTN. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Manual Compliance Rules Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} There are many checks in the Oracle Database STIG as well as other common standards which simply cannot be automated. This could be something as simple as “Ensure the datacenter entrance is secured.” or complex as Oracle Database STIG Rule DG0186 – “The database should not be directly accessible from public or unauthorized networks”. These checks require a human to perform and attest to its successful completion. Enterprise Manager now supports these types of checks in Manual rules. When first associated to a target, each manual rule will generate a single violation. These violations must be manually cleared by a user who is in essence attesting to its successful completion. The user is able to permanently clear the violation or give a future date on which the violation will be regenerated. Setting a future date is useful when policy dictates a periodic re-validation of conformance wherein the user will have to reperform the check. The optional reason field gives the user an opportunity to provide details of the check results. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Violation Suppression There are situations that require the need to permanently or temporarily suppress a legitimate violation or finding. These include approved exceptions and grace periods. Enterprise Manager now supports the ability to temporarily or permanently suppress a violation. Unlike when you clear a manual rule violation, suppression simply removes the violation from the compliance results UI and in turn its negative impact on the score. The violation still remains in the EM repository and can be accounted for in compliance reports. Temporarily suppressing a violation can give users a grace period in which to address an issue. If the issue is not addressed within the specified period, the violation will reappear in the results automatically. Again the user may enter a reason for the suppression which will be permanently saved with the event along with the suppressing user ID. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Additional BI Publisher compliance reports As I am sure you have learned by now, BI Publisher now ships and is integrated with Enterprise Manager 12.1.0.4. This means users can take full advantage of the powerful reporting engine by using the Oracle provided reports or building their own. There are many new compliance related reports available in 12.1.0.4 covering all aspects including the association status, library as well as summary and detailed results reports.  10 New Compliance Reports Compliance Summary Report Example showing STIG results Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Conclusion Together with the Oracle Database 11g STIG compliance standard these features provide a complete solution for easily auditing and reporting the security posture of your Oracle Databases against this well known benchmark. You can view an overview presentation and demo in the screenwatch Using the STIG Compliance Standard on Enterprise Manager's Lifecycle Management page on OTN. Additional EM12c Compliance Management Information Compliance Management - Overview ( Presentation ) Compliance Management - Custom Compliance on Default Data (How To) Compliance Management - Custom Compliance using SQL Configuration Extension (How To) Compliance Management - Customer Compliance using Command Configuration Extension (How To)

  Read the article

• Grandparent – Parent – Child Reports in SQL Developer

  - by thatjeffsmith

  You’ll never see one of these family stickers on my car, but I promise not to judge…much. Parent – Child reports are pretty straightforward in Oracle SQL Developer. You have a ‘parent’ report, and then one or more ‘child’ reports which are based off of a value in a selected row or value from the parent. If you need a quick tutorial to get up to speed on the subject, go ahead and take 5 minutes Shortly before I left for vacation 2 weeks agao, I got an interesting question from one of my Twitter Followers: @thatjeffsmith any luck with the #Oracle awr reports in #SQLDeveloper?This is easy with multi generation parent>child Done in #dbvisualizer — Ronald Rood (@Ik_zelf) August 26, 2012 Now that I’m back from vacation, I can tell Ronald and everyone else that the answer is ‘Yes!’ And here’s how Time to Get Out Your XML Editor Don’t have one? That’s OK, SQL Developer can edit XML files. While the Reporting interface doesn’t surface the ability to create multi-generational reports, the underlying code definitely supports it. We just need to hack away at the XML that powers a report. For this example I’m going to start simple. A query that brings back DEPARTMENTs, then EMPLOYEES, then JOBs. We can build the first two parts of the report using the report editor. A Parent-Child report in Oracle SQL Developer (Departments – Employees) Save the Report to XML Once you’ve generated the XML file, open it with your favorite XML editor. For this example I’ll be using the build-it XML editor in SQL Developer. SQL Developer Reports in their raw XML glory! Right after the PDF element in the XML document, we can start a new ‘child’ report by inserting a DISPLAY element. I just copied and pasted the existing ‘display’ down so I wouldn’t have to worry about screwing anything up. Note I also needed to change the ‘master’ name so it wouldn’t confuse SQL Developer when I try to import/open a report that has the same name. Also I needed to update the binds tags to reflect the names from the child versus the original parent report. This is pretty easy to figure out on your own actually – I mean I’m no real developer and I got it pretty quick. <?xml version="1.0" encoding="UTF-8" ?> <displays> <display id="92857fce-0139-1000-8006-7f0000015340" type="" style="Table" enable="true"> <name><![CDATA[Grandparent]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[select * from hr.departments]]></sql> </query> <pdf version="VERSION_1_7" compression="CONTENT"> <docproperty title="" author="" subject="" keywords="" /> <cell toppadding="2" bottompadding="2" leftpadding="2" rightpadding="2" horizontalalign="LEFT" verticalalign="TOP" wrap="true" /> <column> <heading font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="FIRST_PAGE" /> <footing font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="NONE" /> <blob blob="NONE" zip="false" /> </column> <table font="Courier" size="10" style="NORMAL" color="-16777216" userowshading="false" oddrowshading="-1" evenrowshading="-1" showborders="true" spacingbefore="12" spacingafter="12" horizontalalign="LEFT" /> <header enable="false" generatedate="false"> <data> null </data> </header> <footer enable="false" generatedate="false"> <data value="null" /> </footer> <security enable="false" useopenpassword="false" openpassword="" encryption="EXCLUDE_METADATA"> <permission enable="false" permissionpassword="" allowcopying="true" allowprinting="true" allowupdating="false" allowaccessdevices="true" /> </security> <pagesetup papersize="LETTER" orientation="1" measurement="in" margintop="1.0" marginbottom="1.0" marginleft="1.0" marginright="1.0" /> </pdf> <display id="null" type="" style="Table" enable="true"> <name><![CDATA[Parent]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[select * from hr.employees where department_id = EPARTMENT_ID]]></sql> <binds> <bind id="DEPARTMENT_ID"> <prompt><![CDATA[DEPARTMENT_ID]]></prompt> <tooltip><![CDATA[DEPARTMENT_ID]]></tooltip> <value><![CDATA[NULL_VALUE]]></value> </bind> </binds> </query> <pdf version="VERSION_1_7" compression="CONTENT"> <docproperty title="" author="" subject="" keywords="" /> <cell toppadding="2" bottompadding="2" leftpadding="2" rightpadding="2" horizontalalign="LEFT" verticalalign="TOP" wrap="true" /> <column> <heading font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="FIRST_PAGE" /> <footing font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="NONE" /> <blob blob="NONE" zip="false" /> </column> <table font="Courier" size="10" style="NORMAL" color="-16777216" userowshading="false" oddrowshading="-1" evenrowshading="-1" showborders="true" spacingbefore="12" spacingafter="12" horizontalalign="LEFT" /> <header enable="false" generatedate="false"> <data> null </data> </header> <footer enable="false" generatedate="false"> <data value="null" /> </footer> <security enable="false" useopenpassword="false" openpassword="" encryption="EXCLUDE_METADATA"> <permission enable="false" permissionpassword="" allowcopying="true" allowprinting="true" allowupdating="false" allowaccessdevices="true" /> </security> <pagesetup papersize="LETTER" orientation="1" measurement="in" margintop="1.0" marginbottom="1.0" marginleft="1.0" marginright="1.0" /> </pdf> <display id="null" type="" style="Table" enable="true"> <name><![CDATA[Child]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[select * from hr.jobs where job_id = :JOB_ID]]></sql> <binds> <bind id="JOB_ID"> <prompt><![CDATA[JOB_ID]]></prompt> <tooltip><![CDATA[JOB_ID]]></tooltip> <value><![CDATA[NULL_VALUE]]></value> </bind> </binds> </query> <pdf version="VERSION_1_7" compression="CONTENT"> <docproperty title="" author="" subject="" keywords="" /> <cell toppadding="2" bottompadding="2" leftpadding="2" rightpadding="2" horizontalalign="LEFT" verticalalign="TOP" wrap="true" /> <column> <heading font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="FIRST_PAGE" /> <footing font="Courier" size="10" style="NORMAL" color="-16777216" rowshading="-1" labeling="NONE" /> <blob blob="NONE" zip="false" /> </column> <table font="Courier" size="10" style="NORMAL" color="-16777216" userowshading="false" oddrowshading="-1" evenrowshading="-1" showborders="true" spacingbefore="12" spacingafter="12" horizontalalign="LEFT" /> <header enable="false" generatedate="false"> <data> null </data> </header> <footer enable="false" generatedate="false"> <data value="null" /> </footer> <security enable="false" useopenpassword="false" openpassword="" encryption="EXCLUDE_METADATA"> <permission enable="false" permissionpassword="" allowcopying="true" allowprinting="true" allowupdating="false" allowaccessdevices="true" /> </security> <pagesetup papersize="LETTER" orientation="1" measurement="in" margintop="1.0" marginbottom="1.0" marginleft="1.0" marginright="1.0" /> </pdf> </display> </display> </display> </displays> Save the file and ‘Open Report…’ You’ll see your new report name in the tree. You just need to double-click it to open it. Here’s what it looks like running A 3 generation family Now Let’s Build an AWR Text Report Ronald wanted to have the ability to query AWR snapshots and generate the AWR reports. That requires a few inputs, including a START and STOP snapshot ID. That basically tells AWR what time period to use for generating the report. And here’s where it gets tricky. We’ll need to use aliases for the SNAP_ID column. Since we’re using the same column name from 2 different queries, we need to use different bind variables. Fortunately for us, SQL Developer’s clever enough to use the column alias as the BIND. Here’s what I mean: Grandparent Query SELECT snap_id start1, begin_interval_time, end_interval_time FROM dba_hist_snapshot ORDER BY 1 asc Parent Query SELECT snap_id stop1, begin_interval_time, end_interval_time, :START1 carry FROM dba_hist_snapshot WHERE snap_id > :START1 ORDER BY 1 asc And here’s where it gets even trickier – you can’t reference a bind from outside the parent query. My grandchild report can’t reference a value from the grandparent report. So I just carry the selected value down to the parent. In my parent query SELECT you see the ‘:START1′ at the end? That’s making that value available to me when I use it in my grandchild query. To complicate things a bit further, I can’t have a column name with a ‘:’ in it, or SQL Developer will get confused when I try to reference the value of the variable with the ‘:’ – and ‘::Name’ doesn’t work. But that’s OK, just alias it. Grandchild Query Select Output From Table(Dbms_Workload_Repository.Awr_Report_Text(1298953802, 1,:CARRY, :STOP1)); Ok, and the last trick – I hard-coded my report to use my database’s DB_ID and INST_ID into the AWR package call. Now a smart person could figure out a way to make that work on any database, but I got lazy and and ran out of time. But this should be far enough for you to take it from here. Here’s what my report looks like now: Caution: don’t run this if you haven’t licensed Enterprise Edition with Diagnostic Pack. The Raw XML for this AWR Report <?xml version="1.0" encoding="UTF-8" ?> <displays> <display id="927ba96c-0139-1000-8001-7f0000015340" type="" style="Table" enable="true"> <name><![CDATA[AWR Start Stop Report Final]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[SELECT snap_id start1, begin_interval_time, end_interval_time FROM dba_hist_snapshot ORDER BY 1 asc]]></sql> </query> <display id="null" type="" style="Table" enable="true"> <name><![CDATA[Stop SNAP_ID]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[SELECT snap_id stop1, begin_interval_time, end_interval_time, :START1 carry FROM dba_hist_snapshot WHERE snap_id > :START1 ORDER BY 1 asc]]></sql> </query> <display id="null" type="" style="Table" enable="true"> <name><![CDATA[AWR Report]]></name> <description><![CDATA[]]></description> <tooltip><![CDATA[]]></tooltip> <drillclass><![CDATA[null]]></drillclass> <CustomValues> <TYPE>horizontal</TYPE> </CustomValues> <query> <sql><![CDATA[Select Output From Table(Dbms_Workload_Repository.Awr_Report_Text(1298953802, 1,:CARRY, :STOP1 ))]]></sql> </query> </display> </display> </display> </displays> Should We Build Support for Multiple Levels of Reports into the User Interface? Let us know! A comment here or a suggestion on our SQL Developer Exchange might help your case!

  Read the article

• CodePlex Daily Summary for Tuesday, May 25, 2010

  CodePlex Daily Summary for Tuesday, May 25, 2010New ProjectsBibleNames: BibleNames BibleNames BibleNames BibleNames BibleNamesBing Search for PHP Developers: This is the Bing SDK for PHP, a toolkit that allows you to easily use Bing's API to fetch search results and use in your own application. The Bin...Fading Clock: Fading Clock is a normal clock that has the ability to fade in out. It's developed in C# as a Windows App in .net 2.0.Fuzzy string matching algorithm in C# and LINQ: Fuzzy matching strings. Find out how similar two string is, and find the best fuzzy matching string from a string table. Given a string (strA) and...HexTile editor: Testing hexagonal tile editorhgcheck12: hgcheck12Metaverse Router: Metaverse Router makes it easier for MIIS, ILM, FIM Sync engine administrators to manage multiple provisioning modules, turn on/off provisioning wi...MyVocabulary: Use MyVocabulary to structure and test the words you want to learn in a foreign language. This is a .net 3.5 windows forms application developed in...phpxw: Phpxw 是一个简易的PHP框架。以我自己的姓名命名的。 Phpxw is a simple PHP framework. Take my name named.Plop: Social networking wrappers and projects.PST Data Structure View Tool: PST Data Structure View Tool (PSTViewTool) is a tool supporting the PST file format documentation effort. It allows the user to browse the internal...PST File Format SDK: PST File Format SDK (pstsdk) is a cross platform header only C++ library for reading PST files.QWine: QWine is Queue Machine ApplicationSharePoint Cross Site Collection Security Trimmed Navigation: This SP2010 project will show security trimmed navigation that works across site collections. The project is written for SP2010, but can be easily ...SharePoint List Field Manager: The SharePoint List Field Manager allows users to manage the Boolean properties of a list such as Read Only, Hidden, Show in New Form etc... It sup...Silverlight Toolbar for DataGrid working with RIA Services or local data: DataGridToolbar contains two controls for Silverlight DataGrid designed for RIA Services and local data. It can be used to filter or remove a data,...SilverShader - Silverlight Pixel Shader Demos: SilverShader is an extensible Silverlight application that is used to demonstrate the effect of different pixel shaders. The shaders can be applied...SNCFT Gadget: Ce gadget permet de consulter les horaires des trains et de chercher des informations sur le site de la société nationale des chemins de fer tunisi...Software Transaction Memory: Software Transaction Memory for .NETStreamInsight Samples: This project contains sample code for StreamInsight, Microsoft's platform for complex event processing. The purpose of the samples is to provide a ...StyleAnalizer: A CSS parserSudoku (Multiplayer in RnD): Sudoku project was to practice on C# by making a desktop application using some algorithm Before this, I had worked on http://shaktisaran.tech.o...Tiplican: A small website built for the purpose of learning .Net 4 and MVC 2TPager: Mercurial pager with color support on Windowsunirca: UNIRCA projectWcfTrace: The WcfTrace is a easy way to collect information about WCF-service call order, processing time and etc. It's developed in C#.New ReleasesASP.NET TimePicker Control: 12 24 Hour Bug Fix: 12 24 Hour Bug FixASP.NET TimePicker Control: ASP.NET TimePicker Control: This release fixes a focus bug that manifests itself when switching focus between two different timepicker controls on the same page, and make chan...ASP.NET TimePicker Control: ASP.NET TimePicker Control - colon CSS Fix: Fixes ":" seperator placement issues being too hi and too low in IE and FireFox, respectively.ASP.NET TimePicker Control: Release fixes 24 Hour Mode Bug: Release fixes 24 Hour Mode BugBFBC2 PRoCon: PRoCon 0.5.1.1: Visit http://phogue.net/?p=604 for release notes.BFBC2 PRoCon: PRoCon 0.5.1.2: Release notes can be found at http://phogue.net/?p=604BFBC2 PRoCon: PRoCon 0.5.1.4: Ha.. choosing the "stable" option at the moment is a bit of a joke =\ Release notes at http://phogue.net/?p=604BFBC2 PRoCon: PRoCon 0.5.1.5: BWHAHAHA stable.. ha. Actually this ones looking pretty good now. http://phogue.net/?p=604Bojinx: Bojinx Core V4.5.14: Issues fixed in this release: Fixed an issue that caused referencePropertyName when used through a property configuration in the context to not wo...Bojinx: Bojinx Debugger V0.9B: Output trace and filtering that works with the Bojinx logger.CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1.5 and 4.0.1.5 beta3: Fixed fairly serious bug #13290 http://cassinidev.codeplex.com/WorkItem/View.aspx?WorkItemId=13290Content Rendering: Content Rendering API 1.0.0 Revision 46406: Initial releaseDeploy Workflow Manager: Deploy Workflow Manager Web Part v2: Recommend you test in your development environment first BEFORE using in production.dotSpatial: System.Spatial.Projections Zip May 24, 2010: Adds a new spherical projection.eComic: eComic 2010.0.0.2: Quick release to fix a couple of bugs found in the previous version. Version 2010.0.0.2 Fixed crash error when accessing the "Go To Page" dialog ...Exchange 2010 RBAC Editor (RBAC GUI) - updated on 5/24/2010: RBAC Editor 0.9.4.1: Some bugs fixed; support for unscopoedtoplevel (adding script is not working yet) Please use email address in About menu of the tool for any feedb...Facebook Graph Toolkit: Preview 1 Binaries: The first preview release of the toolkit. Not recommended for use in production, but enought to get started developing your app.Fading Clock: Clock.zip: Clock.zip is a zip file that contains the application Clock.exe.hgcheck12: Rel8082: Rel8082hgcheck12: scsc: scasMetaverse Router: Metaverse Router v1.0: Initial stable release (v.1.0.0.0) of Metaverse Router Working with: FIM 2010 Synchronization Engine ILM 2007 MIIS 2003MSTestGlider: MSTestGlider 1.5: What MSTestGlider 1.5.zip unzips to: http://i49.tinypic.com/2lcv4eg.png If you compile MSTestGlider from its source you will need to change the ou...MyVocabulary: Version 1.0: First releaseNLog - Advanced .NET Logging: Nightly Build 2010.05.24.001: Changes since the last build:2010-05-23 20:45:37 Jarek Kowalski fixed whitespace in NLog.wxs 2010-05-23 12:01:48 Jarek Kowalski BufferingTargetWra...NoteExpress User Tools (NEUT) - Do it by ourselves!: NoteExpress User Tools 2.0.0: 测试版本：NoteExpress 2.5.0.1154 +调整了Tab页的排列方式 注：2.0未做大的改动，仅仅是运行环境由原来的.net 3.5升级到4.0。openrs: Beta Release (Revision 1): This is the beta release of the openrs framework. Please make sure you submit issues in the issue tracker tab. As this is beta, extreme, flawless ...openrs: Revision 2: Revision 2 of the framework. Basic worker example as well as minor improvements on the auth packet.phpxw: Phpxw: Phpxw 1.0 phpxw 是一个简易的PHP框架。以我自己的姓名命名的。 Phpxw is a simple PHP framework. Take my name named. 支持基本的业务逻辑流程，功能模块化，实现了简易的模板技术，同时也可以支持外接模板引擎。 Support...sELedit: sELedit v1.1a: Fixed: clean file before overwriting Fixed: list57 will only created when eLC.Lists.length > 57sGSHOPedit: sGSHOPedit v1.0a: Fixed: bug with wrong item array re-size when adding items after deleting items Added: link to project page pwdatabase.com version is now selec...SharePoint Cross Site Collection Security Trimmed Navigation: Release 1.0.0.0: If you want just the .wsp, and start using this, you can grab it here. Just stsadm add/deploy to your website, and activate the feature as describ...Silverlight 4.0 Popup Menu: Context Menu for Silverlight 4.0 v1.24 Beta: - Updated the demo and added clipboard cut/copy and paste functionality. - Added delay on hover events for both parent and child menus. - Parent me...Silverlight Toolbar for DataGrid working with RIA Services or local data: DataGridToolBar Beta: For Silverlight 4.0sMAPtool: sMAPtool v0.7d (without Maps): Added: link to project pagesMODfix: sMODfix v1.0a: Added: Support for ECM v52 modelssNPCedit: sNPCedit v0.9a: browse source commits for all changes...SocialScapes: SocialScapes TwitterWidget 1.0.0: The SocialScapes TwitterWidget is a DotNetNuke Widget for displaying Twitter searches. This widget will be used to replace the twitter functionali...SQL Server 2005 and 2008 - Backup, Integrity Check and Index Optimization: 23 May 2010: This is the latest version of my solution for Backup, Integrity Check and Index Optimization in SQL Server 2005, SQL Server 2008 and SQL Server 200...sqwarea: Sqwarea 0.0.280.0 (alpha): This release brings a lot of improvements. We strongly recommend you to upgrade to this version.sTASKedit: sTASKedit v0.7c: Minor Changes in GUI & BehaviourSudoku (Multiplayer in RnD): Sudoku (Multiplayer in RnD) 1.0.0.0 source: Sudoku project was to practice on C# by making a desktop application using some algorithm Idea: The basic idea of algorithm is from http://www.ac...Sudoku (Multiplayer in RnD): Sudoku (Multiplayer in RnD) 1.0.0.1 source: Worked on user-interface, would improve it Sudoku project was to practice on C# by making a desktop application using some algorithm Idea: The b...TFS WorkItem Watcher: TFS WorkItem Watcher Version 1.0: This version contains the following new features: Added support to autodetect whether to start as a service or to start in console mode. The "-c" ...TfsPolicyPack: TfsPolicyPack 0.1: This is the first release of the TfsPolicyPack. This release includes the following policies: CustomRegexPathPolicythinktecture Starter STS (Community Edition): StarterSTS v1.1 CTP: Added ActAs / identity delegation support.TPager: TPager-20100524: TPager 2010-05-24 releaseTrance Layer: TranceLayer Transformer: Transformer is a Beta version 2, morphing from "Digger" to "Transformer" release cycle. It is intended to be used as a demonstration of muscles wh...TweetSharp: TweetSharp v1.0.0.0: Changes in v1.0.0Added 100% public code comments Bug fixes based on feedback from the Release Candidate Changes to handle Twitter schema additi...VCC: Latest build, v2.1.30524.0: Automatic drop of latest buildWCF Client Generator: Version 0.9.2.33468: Version 0.9.2.33468 Fixed: Nested enum types names are not handled correctly. Can't close Visual Studio if generated files are open when the code...Word 2007 Redaction Tool: Version 1.2: A minor update to the Word 2007 Redaction Tool. This version can be installed directly over any existing version. Updates to Version 1.2Fixed bugs:...xPollinate - Windows Live Writer Cross Post Plugin: 1.0.0.5 for WLW 14.0.8117.416: This version works with WLW 14.0.8117.416. This release includes a fix to enable publishing posts that have been opened directly from a blog, but ...Yet another developer blog - Examples: jQuery Autocomplete in ASP.NET MVC: This sample application shows how to use jQuery Autocomplete plugin in ASP.NET MVC. This application is accompanied by the following entry on Yet a...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active Projectspatterns & practices – Enterprise LibraryRawrpatterns & practices: Windows Azure Security GuidanceSqlServerExtensionsGMap.NET - Great Maps for Windows Forms & PresentationMono.AddinsCaliburn: An Application Framework for WPF and SilverlightBlogEngine.NETIonics Isapi Rewrite FilterSQL Server PowerShell Extensions

  Read the article

• Currency Conversion in Oracle BI applications

  - by Saurabh Verma

  Authored by Vijay Aggarwal and Hichem Sellami A typical data warehouse contains Star and/or Snowflake schema, made up of Dimensions and Facts. The facts store various numerical information including amounts. Example; Order Amount, Invoice Amount etc. With the true global nature of business now-a-days, the end-users want to view the reports in their own currency or in global/common currency as defined by their business. This presents a unique opportunity in BI to provide the amounts in converted rates either by pre-storing or by doing on-the-fly conversions while displaying the reports to the users. Source Systems OBIA caters to various source systems like EBS, PSFT, Sebl, JDE, Fusion etc. Each source has its own unique and intricate ways of defining and storing currency data, doing currency conversions and presenting to the OLTP users. For example; EBS stores conversion rates between currencies which can be classified by conversion rates, like Corporate rate, Spot rate, Period rate etc. Siebel stores exchange rates by conversion rates like Daily. EBS/Fusion stores the conversion rates for each day, where as PSFT/Siebel store for a range of days. PSFT has Rate Multiplication Factor and Rate Division Factor and we need to calculate the Rate based on them, where as other Source systems store the Currency Exchange Rate directly. OBIA Design The data consolidation from various disparate source systems, poses the challenge to conform various currencies, rate types, exchange rates etc., and designing the best way to present the amounts to the users without affecting the performance. When consolidating the data for reporting in OBIA, we have designed the mechanisms in the Common Dimension, to allow users to report based on their required currencies. OBIA Facts store amounts in various currencies: Document Currency: This is the currency of the actual transaction. For a multinational company, this can be in various currencies. Local Currency: This is the base currency in which the accounting entries are recorded by the business. This is generally defined in the Ledger of the company. Global Currencies: OBIA provides five Global Currencies. Three are used across all modules. The last two are for CRM only. A Global currency is very useful when creating reports where the data is viewed enterprise-wide. Example; a US based multinational would want to see the reports in USD. The company will choose USD as one of the global currencies. OBIA allows users to define up-to five global currencies during the initial implementation. The term Currency Preference is used to designate the set of values: Document Currency, Local Currency, Global Currency 1, Global Currency 2, Global Currency 3; which are shared among all modules. There are four more currency preferences, specific to certain modules: Global Currency 4 (aka CRM Currency) and Global Currency 5 which are used in CRM; and Project Currency and Contract Currency, used in Project Analytics. When choosing Local Currency for Currency preference, the data will show in the currency of the Ledger (or Business Unit) in the prompt. So it is important to select one Ledger or Business Unit when viewing data in Local Currency. More on this can be found in the section: Toggling Currency Preferences in the Dashboard. Design Logic When extracting the fact data, the OOTB mappings extract and load the document amount, and the local amount in target tables. It also loads the exchange rates required to convert the document amount into the corresponding global amounts. If the source system only provides the document amount in the transaction, the extract mapping does a lookup to get the Local currency code, and the Local exchange rate. The Load mapping then uses the local currency code and rate to derive the local amount. The load mapping also fetches the Global Currencies and looks up the corresponding exchange rates. The lookup of exchange rates is done via the Exchange Rate Dimension provided as a Common/Conforming Dimension in OBIA. The Exchange Rate Dimension stores the exchange rates between various currencies for a date range and Rate Type. Two physical tables W_EXCH_RATE_G and W_GLOBAL_EXCH_RATE_G are used to provide the lookups and conversions between currencies. The data is loaded from the source system’s Ledger tables. W_EXCH_RATE_G stores the exchange rates between currencies with a date range. On the other hand, W_GLOBAL_EXCH_RATE_G stores the currency conversions between the document currency and the pre-defined five Global Currencies for each day. Based on the requirements, the fact mappings can decide and use one or both tables to do the conversion. Currency design in OBIA also taps into the MLS and Domain architecture, thus allowing the users to map the currencies to a universal Domain during the implementation time. This is especially important for companies deploying and using OBIA with multiple source adapters. Some Gotchas to Look for It is necessary to think through the currencies during the initial implementation. 1) Identify various types of currencies that are used by your business. Understand what will be your Local (or Base) and Documentation currency. Identify various global currencies that your users will want to look at the reports. This will be based on the global nature of your business. Changes to these currencies later in the project, while permitted, but may cause Full data loads and hence lost time. 2) If the user has a multi source system make sure that the Global Currencies and Global Rate Types chosen in Configuration Manager do have the corresponding source specific counterparts. In other words, make sure for every DW specific value chosen for Currency Code or Rate Type, there is a source Domain mapping already done. Technical Section This section will briefly mention the technical scenarios employed in the OBIA adaptors to extract data from each source system. In OBIA, we have two main tables which store the Currency Rate information as explained in previous sections. W_EXCH_RATE_G and W_GLOBAL_EXCH_RATE_G are the two tables. W_EXCH_RATE_G stores all the Currency Conversions present in the source system. It captures data for a Date Range. W_GLOBAL_EXCH_RATE_G has Global Currency Conversions stored at a Daily level. However the challenge here is to store all the 5 Global Currency Exchange Rates in a single record for each From Currency. Let’s voyage further into the Source System Extraction logic for each of these tables and understand the flow briefly. EBS: In EBS, we have Currency Data stored in GL_DAILY_RATES table. As the name indicates GL_DAILY_RATES EBS table has data at a daily level. However in our warehouse we store the data with a Date Range and insert a new range record only when the Exchange Rate changes for a particular From Currency, To Currency and Rate Type. Below are the main logical steps that we employ in this process. (Incremental Flow only) – Cleanup the data in W_EXCH_RATE_G. Delete the records which have Start Date > minimum conversion date Update the End Date of the existing records. Compress the daily data from GL_DAILY_RATES table into Range Records. Incremental map uses $$XRATE_UPD_NUM_DAY as an extra parameter. Generate Previous Rate, Previous Date and Next Date for each of the Daily record from the OLTP. Filter out the records which have Conversion Rate same as Previous Rates or if the Conversion Date lies within a single day range. Mark the records as ‘Keep’ and ‘Filter’ and also get the final End Date for the single Range record (Unique Combination of From Date, To Date, Rate and Conversion Date). Filter the records marked as ‘Filter’ in the INFA map. The above steps will load W_EXCH_RATE_GS. Step 0 updates/deletes W_EXCH_RATE_G directly. SIL map will then insert/update the GS data into W_EXCH_RATE_G. These steps convert the daily records in GL_DAILY_RATES to Range records in W_EXCH_RATE_G. We do not need such special logic for loading W_GLOBAL_EXCH_RATE_G. This is a table where we store data at a Daily Granular Level. However we need to pivot the data because the data present in multiple rows in source tables needs to be stored in different columns of the same row in DW. We use GROUP BY and CASE logic to achieve this. Fusion: Fusion has extraction logic very similar to EBS. The only difference is that the Cleanup logic that was mentioned in step 0 above does not use $$XRATE_UPD_NUM_DAY parameter. In Fusion we bring all the Exchange Rates in Incremental as well and do the cleanup. The SIL then takes care of Insert/Updates accordingly. PeopleSoft:PeopleSoft does not have From Date and To Date explicitly in the Source tables. Let’s look at an example. Please note that this is achieved from PS1 onwards only. 1 Jan 2010 – USD to INR – 45 31 Jan 2010 – USD to INR – 46 PSFT stores records in above fashion. This means that Exchange Rate of 45 for USD to INR is applicable for 1 Jan 2010 to 30 Jan 2010. We need to store data in this fashion in DW. Also PSFT has Exchange Rate stored as RATE_MULT and RATE_DIV. We need to do a RATE_MULT/RATE_DIV to get the correct Exchange Rate. We generate From Date and To Date while extracting data from source and this has certain assumptions: If a record gets updated/inserted in the source, it will be extracted in incremental. Also if this updated/inserted record is between other dates, then we also extract the preceding and succeeding records (based on dates) of this record. This is required because we need to generate a range record and we have 3 records whose ranges have changed. Taking the same example as above, if there is a new record which gets inserted on 15 Jan 2010; the new ranges are 1 Jan to 14 Jan, 15 Jan to 30 Jan and 31 Jan to Next available date. Even though 1 Jan record and 31 Jan have not changed, we will still extract them because the range is affected. Similar logic is used for Global Exchange Rate Extraction. We create the Range records and get it into a Temporary table. Then we join to Day Dimension, create individual records and pivot the data to get the 5 Global Exchange Rates for each From Currency, Date and Rate Type. Siebel: Siebel Facts are dependent on Global Exchange Rates heavily and almost none of them really use individual Exchange Rates. In other words, W_GLOBAL_EXCH_RATE_G is the main table used in Siebel from PS1 release onwards. As of January 2002, the Euro Triangulation method for converting between currencies belonging to EMU members is not needed for present and future currency exchanges. However, the method is still available in Siebel applications, as are the old currencies, so that historical data can be maintained accurately. The following description applies only to historical data needing conversion prior to the 2002 switch to the Euro for the EMU member countries. If a country is a member of the European Monetary Union (EMU), you should convert its currency to other currencies through the Euro. This is called triangulation, and it is used whenever either currency being converted has EMU Triangulation checked. Due to this, there are multiple extraction flows in SEBL ie. EUR to EMU, EUR to NonEMU, EUR to DMC and so on. We load W_EXCH_RATE_G through multiple flows with these data. This has been kept same as previous versions of OBIA. W_GLOBAL_EXCH_RATE_G being a new table does not have such needs. However SEBL does not have From Date and To Date columns in the Source tables similar to PSFT. We use similar extraction logic as explained in PSFT section for SEBL as well. What if all 5 Global Currencies configured are same? As mentioned in previous sections, from PS1 onwards we store Global Exchange Rates in W_GLOBAL_EXCH_RATE_G table. The extraction logic for this table involves Pivoting data from multiple rows into a single row with 5 Global Exchange Rates in 5 columns. As mentioned in previous sections, we use CASE and GROUP BY functions to achieve this. This approach poses a unique problem when all the 5 Global Currencies Chosen are same. For example – If the user configures all 5 Global Currencies as ‘USD’ then the extract logic will not be able to generate a record for From Currency=USD. This is because, not all Source Systems will have a USD->USD conversion record. We have _Generated mappings to take care of this case. We generate a record with Conversion Rate=1 for such cases. Reusable Lookups Before PS1, we had a Mapplet for Currency Conversions. In PS1, we only have reusable Lookups- LKP_W_EXCH_RATE_G and LKP_W_GLOBAL_EXCH_RATE_G. These lookups have another layer of logic so that all the lookup conditions are met when they are used in various Fact Mappings. Any user who would want to do a LKP on W_EXCH_RATE_G or W_GLOBAL_EXCH_RATE_G should and must use these Lookups. A direct join or Lookup on the tables might lead to wrong data being returned. Changing Currency preferences in the Dashboard: In the 796x series, all amount metrics in OBIA were showing the Global1 amount. The customer needed to change the metric definitions to show them in another Currency preference. Project Analytics started supporting currency preferences since 7.9.6 release though, and it published a Tech note for other module customers to add toggling between currency preferences to the solution. List of Currency Preferences Starting from 11.1.1.x release, the BI Platform added a new feature to support multiple currencies. The new session variable (PREFERRED_CURRENCY) is populated through a newly introduced currency prompt. This prompt can take its values from the xml file: userpref_currencies_OBIA.xml, which is hosted in the BI Server installation folder, under :< home>\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\userpref_currencies.xml This file contains the list of currency preferences, like“Local Currency”, “Global Currency 1”,…which customers can also rename to give them more meaningful business names. There are two options for showing the list of currency preferences to the user in the dashboard: Static and Dynamic. In Static mode, all users will see the full list as in the user preference currencies file. In the Dynamic mode, the list shown in the currency prompt drop down is a result of a dynamic query specified in the same file. Customers can build some security into the rpd, so the list of currency preferences will be based on the user roles…BI Applications built a subject area: “Dynamic Currency Preference” to run this query, and give every user only the list of currency preferences required by his application roles. Adding Currency to an Amount Field When the user selects one of the items from the currency prompt, all the amounts in that page will show in the Currency corresponding to that preference. For example, if the user selects “Global Currency1” from the prompt, all data will be showing in Global Currency 1 as specified in the Configuration Manager. If the user select “Local Currency”, all amount fields will show in the Currency of the Business Unit selected in the BU filter of the same page. If there is no particular Business Unit selected in that filter, and the data selected by the query contains amounts in more than one currency (for example one BU has USD as a functional currency, the other has EUR as functional currency), then subtotals will not be available (cannot add USD and EUR amounts in one field), and depending on the set up (see next paragraph), the user may receive an error. There are two ways to add the Currency field to an amount metric: In the form of currency code, like USD, EUR…For this the user needs to add the field “Apps Common Currency Code” to the report. This field is in every subject area, usually under the table “Currency Tag” or “Currency Code”… In the form of currency symbol ($ for USD, € for EUR,…) For this, the user needs to format the amount metrics in the report as a currency column, by specifying the currency tag column in the Column Properties option in Column Actions drop down list. Typically this column should be the “BI Common Currency Code” available in every subject area. Select Column Properties option in the Edit list of a metric. In the Data Format tab, select Custom as Treat Number As. Enter the following syntax under Custom Number Format: [$:currencyTagColumn=Subjectarea.table.column] Where Column is the “BI Common Currency Code” defined to take the currency code value based on the currency preference chosen by the user in the Currency preference prompt.

  Read the article

• CodePlex Daily Summary for Friday, May 28, 2010

  CodePlex Daily Summary for Friday, May 28, 2010New ProjectsBang: BangBox Office: Event Management for Community Theater Groups: Box Office is an event management web application to help theater groups manage & promote their shows. Manage performance schedules, sell tickets, ...CellsOnWeb: El espacio de las células del Programa Académico Microsoft en Argentina. CRM 4.0 Plugin Queue Item Counter: This is a crm 4.0 plugin to count queue items in each folder and display the number at the end of the name. For example, if the queue name is "Tes...Date Calculator: Date Calculator is a small desktop utility developed using Windows Forms .NET technology. This utility is analogous to the "Date calculation" modul...Enterprise Library Investigate: Enterprise Library Investigate ProjecteProject Management: Ứng dụng nền tảng web hỗ trợ quản lí và giám sát tiến độ dự án của tổ chức doanh nghiệp.Fiddler TreeView Panel Extension: Extension for Fiddler, to display the session information in a TreeView panel instead of the default ListBox, so it groups the information logicall...Git Source Control Provider: Git Source Control Provider is a Visual Studio Plug-in that integrates Git with Visual Studio.InspurProjects: Project on Inspur Co.Kryptonite: The Kryptonite project aims to improve development of websites based on the Kentico CMS. MLang .NET Wrapper: Detect the encoding of a text without BOM (Byte Order Mask) and choose the best Encoding for persistence or network transport of textMondaze: Proof of concept using Windows Azure.MultipointControls: A collection of controls that applied Windows Multipoint Mouse SDK. Windows Multipoint Mouse SDK enable app to have multiple mice interact simultan...Mundo De Bloques: "Mundo de bloques" makes it easier for analists to find the shortest way between two states in a problem using an heuristic function for Artificial...MyRPGtests: Just some tests :)OffInvoice Add-in for MS Office 2010: Project Description: The project it's based in the ability to extend funtionality in the Microsoft Office 2010 suite.OpenGraph .NET: A C# client for the Facebook Graph API. Supports desktop, web, ASP.NET MVC, and Silverlight connections and real-time updates. PLEASE NOTE: I dis...Portable Extensible Metadata (PEM) Data Annotation Generator: This project intends to help developers who uses PEM - Portable Extensible Metadata for Entity Framework generating Data Annotation information fro...Production and sale of plastic window systems: Automation company produces window design, production and sale of plastic window systems, management of sales contracts and their execution, print ...Renjian Storm (Renjian Image Viewer Uploader): Renjian Image Viewer UploaderShark Web Intelligence CMS: Shark Web Intelligence Inc. Content Management System.Shuffleboard Game for Windows Phone 7: This is a sample Shuffleboard game written in Silverlight for Windows Phone 7. It demonstrates physics, procedural animation, perspective transform...Silverlight Property Grid: Visual Studio Style PropertyGrid for Silverlight.SvnToTfs: Simple tool that migrates every Subversion revision toward Team Foundation Server 2010. It is developed in C# witn a WPF front-end.Tamias: Basic Cms Mvc Contrib Portable Area: The goal of this project is to have a easy-to-integrate basic cms for ASP.NET MVC applications based on MVC Contrib Portable Areas.TwitBy: TwitBy is a Twitter client for anyone who uses Twitter. It's easy to use and all of the major features are there. More features to come. H...Under Construction: A simple site that can be used as a splash for sites being upgraded or developed. UO Editor: The Owner & Organisation Editor makes it easy to view and edit the names of the registered owner and registered organization for your Windows OS. N...webform2010: this is the test projectWireless Network: ssWiX Toolset: The Windows Installer XML (WiX) is a toolset that builds Windows installation packages from XML source code. The toolset supports a command line en...Xna.Extend: A collection of easy to use Xna components for aiding a game programmer in developing thee next big thing. I plan on using the components from this...New ReleasesA Guide to Parallel Programming: Drop 4 - Guide Preface, Chapters 1 - 5, and code: This is Drop 4 with Guide Preface, Chapters 1 - 5, and References, and the accompanying code samples. This drop requires Visual Studio 2010 Beta 2 ...Ajax Toolkit for ASP.NET MVC: MAT 1.1: MAT 1.1Community Forums NNTP bridge: Community Forums NNTP Bridge V09: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release solves ...Community Forums NNTP bridge: Community Forums NNTP Bridge V10: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has add...Community Forums NNTP bridge: Community Forums NNTP Bridge V11: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has add...CSS 360 Planetary Calendar: Beta Release: =============================================================================== Beta Release Version: 0.2 Description: This is the beta release de...Date Calculator: DateCalculator v1.0: This is the first release and as far as I know this is a stable version.eComic: eComic 2010.0.0.4: Version 2010.0.0.4 Change LogFixed issues in the "Full Screen Control Panel" causing it to lack translucence Added loupe magnification control ...Expression Encoder Batch Processor: Runtime Application v0.2: New in this version: Added more error handling if files not exist. Added button/feature to quit after current encoding job. Added code to handl...Fiddler TreeView Panel Extension: FiddlerTreeViewPanel 0.7: Initial compiled version of the assembly, ready to use. Please refer to http://fiddlertreeviewpanel.codeplex.com/ for instructions and installation.Gardens Point LEX: Gardens Point LEX v1.1.4: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.1.4 corre...Gardens Point Parser Generator: Gardens Point Parser Generator v1.4.1: Version 1.4.1 differs from version 1.4.0 only in containing a corrected version of a previously undocumented feature which allows the generation of...IsWiX: IsWiX 1.0.264.0: Build 1.0.264.0 - built against Fireworks 1.0.264.0. Adds support for autogenerating the SourceDir prepreprocessor variable and gives user choice t...Matrix: Matrix 0.5.2: Updated licenseMesopotamia Experiment: Mesopotamia 1.2.90: Release Notes - Ugraded to Microsoft Robotics Developer Studio 2008 R3 Bug Fixes - Fix to keep any sole organisms that penetrate to the next fitne...Microsoft Crm 4.0 Filtered Lookup: Microsoft Crm 4.0 Filtered Lookup: How to use: Allow passing custom querystring values: Create a DWORD registry key named [DisableParameterFilter] under [HKEY_LOCAL_MACHINE\SOFTWAR...MSBuild Extension Pack: May 2010: The MSBuild Extension Pack May 2010 release provides a collection of over 340 MSBuild tasks. A high level summary of what the tasks currently cover...MultiPoint Vote: MultiPointVote v.1: This accepts user inputs: number of participants, poll/survey title and the list of options A text file containing the items listed line per line...Mundo De Bloques: Mundo de Bloques, Release 1: "Mundo de bloques" makes it easier for analists to find the shortest way between two states in a problem using an heuristic function for Artificial...OffInvoice Add-in for MS Office 2010: OffInvoice for Office 2010 V1.0 Installer: Add-in for MS Word 2010 or MS Excel 2010 to allow the management (issuing, visualization and reception) of electronic invoices, based in the XML fo...OpenGraph .NET: 0.9.1 Beta: This is the first public release of OpenGraph .NET.patterns & practices: Composite WPF and Silverlight: Prism v2.2 - May 2010 Release: Composite Application Guidance for WPF and Silverlight - May 2010 Release (Prism V2.2) The Composite Application Guidance for WPF and Silverlight ...Portable Extensible Metadata (PEM) Data Annotation Generator: Release 49376: First release.Production and sale of plastic window systems: Yanuary 2009: NOTEBefore loading program, make sure you have installed MySQL and created DataBase that store in Source Code (look at below) Where Is The Source?...PROGRAMMABLE SOFTWARE DEVELOPMENT ENVIRONMENT: PROGRAMMABLE SOFTWARE DEVELOPMENT ENVIRONMENT--3.2: The current version of the Programmable Software Development Environment has the capability of reading an optional text file in each source develop...Rapidshare Episode Downloader: RED 0.8.6: - Fixed Edit form to actually save the data - Added Bypass Validation to enable future episodes - Added Search parameter to Edit form - Added refr...Renjian Storm (Renjian Image Viewer Uploader): Renjian Storm 0.6: 人间风暴 v0.6 稳定版sELedit: sELedit v1.1b: + Fixed: when export and import items to text files, there was a bug with "NULL" bytes in the unicode stringShake - C# Make: Shake v0.1.21: Changes: FileTask CopyDir method modified, see documentationSharePoint Labs: SPLab7001A-ENU-Level100: SPLab7001A-ENU-Level100 This SharePoint Lab will teach how to analyze and audit WSP files. WSP files are somewhere in a no man's land between ITPro...SharePoint Rsync List: 1.0.0.3: Fix spcontext dispose bug in menu try and run jobs only on central admin server mark a single file failure if file not copied don't delete destinat...Shuffleboard Game for Windows Phone 7: Shuffleboard 1.0.0.1: Source code, solution files, and assets.Software Is Hardwork: Sw. Is Hw. Lib. 3.0.0.x+04: Sw. Is Hw. Lib. 3.0.0.x+04SoulHackers Demon Unite(Chinese version): WPFClient pre alpha: can unite 2, 3 or more demons. can un-unite 1 demon to 2 demon (no triple un-unite yet).Team Deploy: Team Deploy 2010 R1: This is the initial release for Team Deploy 2010 for TFS Team Build 2010. All features from Team Build 2.x are functional in this version. Comple...Under Construction: Under Construction: All Files required to show under construction page. The Page will pull through the Domain name that the site is being run on this allows you to use...Unit Driven: Version 0.0.5: - Tests nested by namespace parts. - Run buttons properly disabled based on currently running tests. - Timeouts for async tests enabled.UO Editor: UO Editor v1.0: Initial ReleaseVCC: Latest build, v2.1.30527.0: Automatic drop of latest buildWeb Service Software Factory Contrib: Import WSDL 2010: Generate Service Contract models from existing WSDL documents for Web Service Software Factory 2010. Usage: Install the vsix and right click on a S...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryMicrosoft SQL Server Community & SamplesPHPExcelASP.NETMost Active ProjectsAStar.netpatterns & practices – Enterprise LibraryGMap.NET - Great Maps for Windows Forms & PresentationSqlServerExtensionsBlogEngine.NETRawrpatterns & practices: Windows Azure Security GuidanceCodeReviewCustomer Portal Accelerator for Microsoft Dynamics CRMIonics Isapi Rewrite Filter

  Read the article

• socket connection failed, telnet OK

  - by cf16

  my problem is that I can't connect two comps through socket (windows xp and windows7) although the server created with socket is listening and I can telnet it. It receives then information and does what should be done, but if I run the corresponding socket client I get error 10061. Moreover I am behind firewall - these two comps are running within my LAN, the windows firewalls are turned off, comp1: 192.168.1.2 port 12345 comp1: 192.168.1.6 port 12345 router: 192.168.1.1 Maybe port forwarding could help? But most important for me is to answer why Sockets fail if telnet works fine. client: int main(){ // Initialize Winsock. WSADATA wsaData; int iResult = WSAStartup(MAKEWORD(2,2), &wsaData); if (iResult != NO_ERROR) printf("Client: Error at WSAStartup().\n"); else printf("Client: WSAStartup() is OK.\n"); // Create a socket. SOCKET m_socket; m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); if (m_socket == INVALID_SOCKET){ printf("Client: socket() - Error at socket(): %ld\n", WSAGetLastError()); WSACleanup(); return 7; }else printf("Client: socket() is OK.\n"); // Connect to a server. sockaddr_in clientService; clientService.sin_family = AF_INET; //clientService.sin_addr.s_addr = inet_addr("77.64.240.156"); clientService.sin_addr.s_addr = inet_addr("192.168.1.5"); //clientService.sin_addr.s_addr = inet_addr("87.207.222.5"); clientService.sin_port = htons(12345); if (connect(m_socket, (SOCKADDR*)&clientService, sizeof(clientService)) == SOCKET_ERROR){ printf("Client: connect() - Failed to connect.\n"); wprintf(L"connect function failed with error: %ld\n", WSAGetLastError()); iResult = closesocket(m_socket); if (iResult == SOCKET_ERROR) wprintf(L"closesocket function failed with error: %ld\n", WSAGetLastError()); WSACleanup(); return 6; } // Send and receive data int bytesSent; int bytesRecv = SOCKET_ERROR; // Be careful with the array bound, provide some checking mechanism char sendbuf[200] = "Client: Sending some test string to server..."; char recvbuf[200] = ""; bytesSent = send(m_socket, sendbuf, strlen(sendbuf), 0); printf("Client: send() - Bytes Sent: %ld\n", bytesSent); while(bytesRecv == SOCKET_ERROR){ bytesRecv = recv(m_socket, recvbuf, 32, 0); if (bytesRecv == 0 || bytesRecv == WSAECONNRESET){ printf("Client: Connection Closed.\n"); break; }else printf("Client: recv() is OK.\n"); if (bytesRecv < 0) return 0; else printf("Client: Bytes received - %ld.\n", bytesRecv); } system("pause"); return 0; } server: int main(){ WORD wVersionRequested; WSADATA wsaData={0}; int wsaerr; // Using MAKEWORD macro, Winsock version request 2.2 wVersionRequested = MAKEWORD(2, 2); wsaerr = WSAStartup(wVersionRequested, &wsaData); if (wsaerr != 0){ /* Tell the user that we could not find a usable WinSock DLL.*/ printf("Server: The Winsock dll not found!\n"); return 0; }else{ printf("Server: The Winsock dll found!\n"); printf("Server: The status: %s.\n", wsaData.szSystemStatus); } /* Confirm that the WinSock DLL supports 2.2.*/ /* Note that if the DLL supports versions greater */ /* than 2.2 in addition to 2.2, it will still return */ /* 2.2 in wVersion since that is the version we */ /* requested. */ if (LOBYTE(wsaData.wVersion) != 2 || HIBYTE(wsaData.wVersion) != 2 ){ /* Tell the user that we could not find a usable WinSock DLL.*/ printf("Server: The dll do not support the Winsock version %u.%u!\n", LOBYTE(wsaData.wVersion), HIBYTE(wsaData.wVersion)); WSACleanup(); return 0; }else{ printf("Server: The dll supports the Winsock version %u.%u!\n", LOBYTE(wsaData.wVersion), HIBYTE(wsaData.wVersion)); printf("Server: The highest version this dll can support: %u.%u\n", LOBYTE(wsaData.wHighVersion), HIBYTE(wsaData.wHighVersion)); } //////////Create a socket//////////////////////// //Create a SOCKET object called m_socket. SOCKET m_socket; // Call the socket function and return its value to the m_socket variable. // For this application, use the Internet address family, streaming sockets, and the TCP/IP protocol. // using AF_INET family, TCP socket type and protocol of the AF_INET - IPv4 m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); // Check for errors to ensure that the socket is a valid socket. if (m_socket == INVALID_SOCKET){ printf("Server: Error at socket(): %ld\n", WSAGetLastError()); WSACleanup(); //return 0; }else{ printf("Server: socket() is OK!\n"); } ////////////////bind////////////////////////////// // Create a sockaddr_in object and set its values. sockaddr_in service; // AF_INET is the Internet address family. service.sin_family = AF_INET; // "127.0.0.1" is the local IP address to which the socket will be bound. service.sin_addr.s_addr = htons(INADDR_ANY);//inet_addr("127.0.0.1");//htons(INADDR_ANY); //inet_addr("192.168.1.2"); // 55555 is the port number to which the socket will be bound. // using the htons for big-endian service.sin_port = htons(12345); // Call the bind function, passing the created socket and the sockaddr_in structure as parameters. // Check for general errors. if (bind(m_socket, (SOCKADDR*)&service, sizeof(service)) == SOCKET_ERROR){ printf("Server: bind() failed: %ld.\n", WSAGetLastError()); closesocket(m_socket); //return 0; }else{ printf("Server: bind() is OK!\n"); } // Call the listen function, passing the created socket and the maximum number of allowed // connections to accept as parameters. Check for general errors. if (listen(m_socket, 1) == SOCKET_ERROR) printf("Server: listen(): Error listening on socket %ld.\n", WSAGetLastError()); else{ printf("Server: listen() is OK, I'm waiting for connections...\n"); } // Create a temporary SOCKET object called AcceptSocket for accepting connections. SOCKET AcceptSocket; // Create a continuous loop that checks for connections requests. If a connection // request occurs, call the accept function to handle the request. printf("Server: Waiting for a client to connect...\n"); printf("***Hint: Server is ready...run your client program...***\n"); // Do some verification... while (1){ AcceptSocket = SOCKET_ERROR; while (AcceptSocket == SOCKET_ERROR){ AcceptSocket = accept(m_socket, NULL, NULL); } // else, accept the connection... note: now it is wrong implementation !!!!!!!! !! !! (only 1 char) // When the client connection has been accepted, transfer control from the // temporary socket to the original socket and stop checking for new connections. printf("Server: Client Connected! Mammamija. \n"); m_socket = AcceptSocket; char recvBuf[200]=""; char * rc=recvBuf; int bytesRecv=recv(m_socket,recvBuf,64,0); if(bytesRecv==0 || bytesRecv==WSAECONNRESET){ cout<<"server: connection closed.\n"; }else{ cout<<"server: recv() is OK.\n"; if(bytesRecv<0){ return 0; }else{ printf("server: bytes received: %ld.\n",recvBuf); } }

  Read the article

• Create excel files with GemBox.Spreadsheet .NET component

  - by hajan

  Generating excel files from .NET code is not always a very easy task, especially if you need to make some formatting or you want to do something very specific that requires extra coding. I’ve recently tried the GemBox Spreadsheet and I would like to share my experience with you. First of all, you can install GemBox Spreadsheet library from VS.NET 2010 Extension manager by searching in the gallery: Go in the Online Gallery tab (as in the picture bellow) and write GemBox in the Search box on top-right of the Extension Manager, so you will get the following result: Click Download on GemBox.Spreadsheet and you will be directed to product website. Click on the marked link then you will get to the following page where you have the component download link Once you download it, install the MSI file. Open the installation folder and find the Bin folder. There you have GemBox.Spreadsheet.dll in three folders each for different .NET Framework version. Now, lets move to Visual Studio.NET. 1. Create sample ASP.NET Web Application and give it a name. 2. Reference The GemBox.Spreadsheet.dll file in your project So you don’t need to search for the dll file in your disk but you can simply find it in the .NET tab in ‘Add Reference’ window and you have all three versions. I chose the version for 4.0.30319 runtime. Next, I will retrieve data from my Pubs database. I’m using Entity Framework. Here is the code (read the comments in it):             //get data from pubs database, tables: authors, titleauthor, titles             pubsEntities context = new pubsEntities();             var authorTitles = (from a in context.authors                                join tl in context.titleauthor on a.au_id equals tl.au_id                                join t in context.titles on tl.title_id equals t.title_id                                select new AuthorTitles                                {                                     Name = a.au_fname,                                     Surname = a.au_lname,                                     Title = t.title,                                     Price = t.price,                                     PubDate = t.pubdate                                }).ToList();             //using GemBox library now             ExcelFile myExcelFile = new ExcelFile();             ExcelWorksheet excWsheet = myExcelFile.Worksheets.Add("Hajan's worksheet");             excWsheet.Cells[0, 0].Value = "Pubs database Authors and Titles";             excWsheet.Cells[0, 0].Style.Borders.SetBorders(MultipleBorders.Bottom,System.Drawing.Color.Red,LineStyle.Thin);             excWsheet.Cells[0, 1].Style.Borders.SetBorders(MultipleBorders.Bottom, System.Drawing.Color.Red, LineStyle.Thin);                                      int numberOfColumns = 5; //the number of properties in the authorTitles we have             //for each column             for (int c = 0; c < numberOfColumns; c++)             {                 excWsheet.Columns[c].Width = 25 * 256; //set the width to each column                             }             //header row cells             excWsheet.Rows[2].Cells[0].Value = "Name";             excWsheet.Rows[2].Cells[1].Value = "Surname";             excWsheet.Rows[2].Cells[2].Value = "Title";             excWsheet.Rows[2].Cells[3].Value = "Price";             excWsheet.Rows[2].Cells[4].Value = "PubDate";             //bind authorTitles in the excel worksheet             int currentRow = 3;             foreach (AuthorTitles at in authorTitles)             {                 excWsheet.Rows[currentRow].Cells[0].Value = at.Name;                 excWsheet.Rows[currentRow].Cells[1].Value = at.Surname;                 excWsheet.Rows[currentRow].Cells[2].Value = at.Title;                 excWsheet.Rows[currentRow].Cells[3].Value = at.Price;                 excWsheet.Rows[currentRow].Cells[4].Value = at.PubDate;                 currentRow++;             }             //stylizing my excel file look             CellStyle style = new CellStyle(myExcelFile);             style.HorizontalAlignment = HorizontalAlignmentStyle.Left;             style.VerticalAlignment = VerticalAlignmentStyle.Center;             style.Font.Color = System.Drawing.Color.DarkRed;             style.WrapText = true;             style.Borders.SetBorders(MultipleBorders.Top                 | MultipleBorders.Left | MultipleBorders.Right                 | MultipleBorders.Bottom, System.Drawing.Color.Black,                 LineStyle.Thin);                                 //pay attention on this, we set created style on the given (firstRow, firstColumn, lastRow, lastColumn)             //in my example:             //firstRow = 2; firstColumn = 0; lastRow = authorTitles.Count+1; lastColumn = numberOfColumns-1; variable             excWsheet.Cells.GetSubrangeAbsolute(3, 0, authorTitles.Count+2, numberOfColumns-1).Style = style;             //save my excel file             myExcelFile.SaveXls(Server.MapPath(".") + @"/myFile.xls"); The AuthorTitles class: public class AuthorTitles {     public string Name { get; set; }     public string Surname { get; set; }     public string Title { get; set; }     public decimal? Price { get; set; }     public DateTime PubDate { get; set; } } The excel file will be generated in the root of your ASP.NET Web Application. The result is: There is a lot more you can do with this library. A set of good examples you have in the GemBox.Spreadsheet Samples Explorer application which comes together with the installation and you can find it by default in Start –> All Programs –> GemBox Software –> GemBox.Spreadsheet Samples Explorer. Hope this was useful for you. Best Regards, Hajan

  Read the article

• UAT Testing for SOA 10G Clusters

  - by [email protected]

  A lot of customers ask how to verify their SOA clusters and make them production ready. Here is a list that I recommend using for 10G SOA Clusters. v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-CA X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; mso-bidi-font-size:12.0pt; font-family:"Calibri","sans-serif"; mso-fareast-language:EN-US;} Test cases for each component - Oracle Application Server 10G General Application Server test cases This section is going to cover very General test cases to make sure that the Application Server cluster has been set up correctly and if you can start and stop all the components in the server via opmnct and AS Console. Test Case 1 Check if you can see AS instances in the console Implementation 1. Log on to the AS Console --> check to see if you can see all the nodes in your AS cluster. You should be able to see all the Oracle AS instances that are part of the cluster. This means that the OPMN clustering worked and the AS instances successfully joined the AS cluster. Result You should be able to see if all the instances in the AS cluster are listed in the EM console. If the instances are not listed here are the files to check to see if OPMN joined the cluster properly: $ORACLE_HOME\opmn\logs{*}opmn.log*$ORACLE_HOME\opmn\logs{*}opmn.dbg* If OPMN did not join the cluster properly, please check the opmn.xml file to make sure the discovery multicast address and port are correct (see this link  for opmn documentation). Restart the whole instance using opmnctl stopall followed by opmnctl startall. Log on to AS console to see if instance is listed as part of the cluster. Test Case 2 Check to see if you can start/stop each component Implementation Check each OC4J component on each AS instanceStart each and every component through the AS console to see if they will start and stop.Do that for each and every instance. Result Each component should start and stop through the AS console. You can also verify if the component started by checking opmnctl status by logging onto each box associated with the cluster Test Case 3 Add/modify a datasource entry through AS console on a remote AS instance (not on the instance where EM is physically running) Implementation Pick an OC4J instanceCreate a new data-source through the AS consoleModify an existing data-source or connection pool (optional) Result Open $ORACLE_HOME\j2ee\<oc4j_name>\config\data-sources.xml to see if the new (and or the modified) connection details and data-source exist. If they do then the AS console has successfully updated a remote file and MBeans are communicating correctly. Test Case 4 Start and stop AS instances using opmnctl @cluster command Implementation 1. Go to $ORACLE_HOME\opmn\bin and use the opmnctl @cluster to start and stop the AS instances Result Use opmnctl @cluster status to check for start and stop statuses.  HTTP server test cases This section will deal with use cases to test HTTP server failover scenarios. In these examples the HTTP server will be talking to the BPEL console (or any other web application that the client wants), so the URL will be _http://hostname:port\BPELConsole Test Case 1  Shut down one of the HTTP servers while accessing the BPEL console and see the requested routed to the second HTTP server in the cluster Implementation Access the BPELConsoleCheck $ORACLE_HOME\Apache\Apache\logs\access_log --> check for the timestamp and the URL that was accessed by the user. Timestamp and URL would look like this 1xx.2x.2xx.xxx [24/Mar/2009:16:04:38 -0500] "GET /BPELConsole=System HTTP/1.1" 200 15 After you have figured out which HTTP server this is running on, shut down this HTTP server by using opmnctl stopproc --> this is a graceful shutdown.Access the BPELConsole again (please note that you should have a LoadBalancer in front of the HTTP server and configured the Apache Virtual Host, see EDG for steps)Check $ORACLE_HOME\Apache\Apache\logs\access_log --> check for the timestamp and the URL that was accessed by the user. Timestamp and URL would look like above Result Even though you are shutting down the HTTP server the request is routed to the surviving HTTP server, which is then able to route the request to the BPEL Console and you are able to access the console. By checking the access log file you can confirm that the request is being picked up by the surviving node. Test Case 2 Repeat the same test as above but instead of calling opmnctl stopproc, pull the network cord of one of the HTTP servers, so that the LBR routes the request to the surviving HTTP node --> this is simulating a network failure. Test Case 3 In test case 1 we have simulated a graceful shutdown, in this case we will simulate an Apache crash Implementation Use opmnctl status -l to get the PID of the HTTP server that you would like forcefully bring downOn Linux use kill -9 <PID> to kill the HTTP serverAccess the BPEL console Result As you shut down the HTTP server, OPMN will restart the HTTP server. The restart may be so quick that the LBR may still route the request to the same server. One way to check if the HTTP server restared is to check the new PID and the timestamp in the access log for the BPEL console. BPEL test cases This section is going to cover scenarios dealing with BPEL clustering using jGroups, BPEL deployment and testing related to BPEL failover. Test Case 1 Verify that jGroups has initialized correctly. There is no real testing in this use case just a visual verification by looking at log files that jGroups has initialized correctly. Check the opmn log for the BPEL container for all nodes at $ORACLE_HOME/opmn/logs/<group name><container name><group name>~1.log. This logfile will contain jGroups related information during startup and steady-state operation. Soon after startup you should find log entries for UDP or TCP.Example jGroups Log Entries for UDPApr 3, 2008 6:30:37 PM org.collaxa.thirdparty.jgroups.protocols.UDP createSockets ·         INFO: sockets will use interface 144.25.142.172·          ·         Apr 3, 2008 6:30:37 PM org.collaxa.thirdparty.jgroups.protocols.UDP createSockets·          ·         INFO: socket information:·          ·         local_addr=144.25.142.172:1127, mcast_addr=228.8.15.75:45788, bind_addr=/144.25.142.172, ttl=32·         sock: bound to 144.25.142.172:1127, receive buffer size=64000, send buffer size=32000·         mcast_recv_sock: bound to 144.25.142.172:45788, send buffer size=32000, receive buffer size=64000·         mcast_send_sock: bound to 144.25.142.172:1128, send buffer size=32000, receive buffer size=64000·         Apr 3, 2008 6:30:37 PM org.collaxa.thirdparty.jgroups.protocols.TP$DiagnosticsHandler bindToInterfaces·          ·         -------------------------------------------------------·          ·         GMS: address is 144.25.142.172:1127·          ------------------------------------------------------- Example jGroups Log Entries for TCPApr 3, 2008 6:23:39 PM org.collaxa.thirdparty.jgroups.blocks.ConnectionTable start ·         INFO: server socket created on 144.25.142.172:7900·          ·         Apr 3, 2008 6:23:39 PM org.collaxa.thirdparty.jgroups.protocols.TP$DiagnosticsHandler bindToInterfaces·          ·         -------------------------------------------------------·         GMS: address is 144.25.142.172:7900------------------------------------------------------- In the log below the "socket created on" indicates that the TCP socket is established on the own node at that IP address and port the "created socket to" shows that the second node has connected to the first node, matching the logfile above with the IP address and port.Apr 3, 2008 6:25:40 PM org.collaxa.thirdparty.jgroups.blocks.ConnectionTable start ·         INFO: server socket created on 144.25.142.173:7901·          ·         Apr 3, 2008 6:25:40 PM org.collaxa.thirdparty.jgroups.protocols.TP$DiagnosticsHandler bindToInterfaces·          ·         ------------------------------------------------------·         GMS: address is 144.25.142.173:7901·         -------------------------------------------------------·         Apr 3, 2008 6:25:41 PM org.collaxa.thirdparty.jgroups.blocks.ConnectionTable getConnectionINFO: created socket to 144.25.142.172:7900  Result By reviewing the log files, you can confirm if BPEL clustering at the jGroups level is working and that the jGroup channel is communicating. Test Case 2  Test connectivity between BPEL Nodes Implementation Test connections between different cluster nodes using ping, telnet, and traceroute. The presence of firewalls and number of hops between cluster nodes can affect performance as they have a tendency to take down connections after some time or simply block them.Also reference Metalink Note 413783.1: "How to Test Whether Multicast is Enabled on the Network." Result Using the above tools you can confirm if Multicast is working  and whether BPEL nodes are commnunicating. Test Case3 Test deployment of BPEL suitcase to one BPEL node.  Implementation Deploy a HelloWorrld BPEL suitcase (or any other client specific BPEL suitcase) to only one BPEL instance using ant, or JDeveloper or via the BPEL consoleLog on to the second BPEL console to check if the BPEL suitcase has been deployed Result If jGroups has been configured and communicating correctly, BPEL clustering will allow you to deploy a suitcase to a single node, and jGroups will notify the second instance of the deployment. The second BPEL instance will go to the DB and pick up the new deployment after receiving notification. The result is that the new deployment will be "deployed" to each node, by only deploying to a single BPEL instance in the BPEL cluster. Test Case 4  Test to see if the BPEL server failsover and if all asynch processes are picked up by the secondary BPEL instance Implementation Deploy a 2 Asynch process: A ParentAsynch Process which calls a ChildAsynchProcess with a variable telling it how many times to loop or how many seconds to sleepA ChildAsynchProcess that loops or sleeps or has an onAlarmMake sure that the processes are deployed to both serversShut down one BPEL serverOn the active BPEL server call ParentAsynch a few times (use the load generation page)When you have enough ParentAsynch instances shut down this BPEL instance and start the other one. Please wait till this BPEL instance shuts down fully before starting up the second one.Log on to the BPEL console and see that the instance were picked up by the second BPEL node and completed Result The BPEL instance will failover to the secondary node and complete the flow ESB test cases This section covers the use cases involved with testing an ESB cluster. For this section please Normal 0 false false false EN-CA X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; mso-bidi-font-size:12.0pt; font-family:"Calibri","sans-serif"; mso-fareast-language:EN-US;} follow Metalink Note 470267.1 which covers the basic tests to verify your ESB cluster.

  Read the article

• Dynamic XAP loading in Task-It - Part 1

  Download Source Code NOTE 1: The source code provided is running against the RC versions of Silverlight 4 and VisualStudio 2010, so you will need to update to those bits to run it. NOTE 2: After downloading the source, be sure to set the .Web project as the StartUp Project, and Default.aspx as the Start Page In my MEF into post, MEF to the rescue in Task-It, I outlined a couple of issues I was facing and explained why I chose MEF (the Managed Extensibility Framework) to solve these issues. Other posts to check out There are a few other resources out there around dynamic XAP loading that you may want to review (by the way, Glenn Block is the main dude when it comes to MEF): Glenn Blocks 3-part series on a dynamically loaded dashboard Glenn and John Papas Silverlight TV video on dynamic xap loading These provide some great info, but didnt exactly cover the scenario I wanted to achieve in Task-Itand that is dynamically loading each of the apps pages the first time the user enters a page. The code In the code I provided for download above, I created a simple solution that shows the technique I used for dynamic XAP loading in Task-It, but without all of the other code that surrounds it. Taking all that other stuff away should make it easier to grasp. Having said that, there is still a fair amount of code involved. I am always looking for ways to make things simpler, and to achieve the desired result with as little code as possible, so if I find a better/simpler way I will blog about it, but for now this technique works for me. When I created this solution I started by creating a new Silverlight Navigation Application called DynamicXAP Loading. I then added the following line to my UriMappings in MainPage.xaml: <uriMapper:UriMapping Uri="/{assemblyName};component/{path}" MappedUri="/{assemblyName};component/{path}"/> In the section of MainPage.xaml that produces the page links in the upper right, I kept the Home link, but added a couple of new ones (page1 and page 2). These are the pages that will be dynamically (lazy) loaded: <StackPanel x:Name="LinksStackPanel" Style="{StaticResource LinksStackPanelStyle}">      <HyperlinkButton Style="{StaticResource LinkStyle}" NavigateUri="/Home" TargetName="ContentFrame" Content="home"/>      <Rectangle Style="{StaticResource DividerStyle}"/>      <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 1" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage1}"/>      <Rectangle Style="{StaticResource DividerStyle}"/>      <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 2" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage2}"/>  </StackPanel> In App.xaml.cs I added a bit of MEF code. In Application_Startup I call a method called InitializeContainer, which creates a PackageCatalog (a MEF thing), then I create a CompositionContainer and pass it to the CompositionHost.Initialize method. This is boiler-plate MEF stuff that allows you to do 'composition' and import 'packages'. You're welcome to do a bit more MEF research on what is happening here if you'd like, but for the purpose of this example you can just trust that it works. :-) private void Application_Startup(object sender, StartupEventArgs e) {     InitializeContainer();     this.RootVisual = new MainPage(); }   private static void InitializeContainer() {     var catalog = new PackageCatalog();     catalog.AddPackage(Package.Current);     var container = new CompositionContainer(catalog);     container.ComposeExportedValue(catalog);     CompositionHost.Initialize(container); } Infrastructure In the sample code you'll notice that there is a project in the solution called DynamicXAPLoading.Infrastructure. This is simply a Silverlight Class Library project that I created just to move stuff I considered application 'infrastructure' code into a separate place, rather than cluttering the main Silverlight project (DynamicXapLoading). I did this same thing in Task-It, as the amount of this type of code was starting to clutter up the Silverlight project, and it just seemed to make sense to move things like Enums, Constants and the like off to a separate place. In the DynamicXapLoading.Infrastructure project you'll see 3 classes: Enums - There is only one enum in here called ModuleEnum. We'll use these later. PageMetadata - We will use this class later to add metadata to a new dynamically loaded project. ViewModelBase - This is simply a base class for view models that we will use in this, as well as future samples. As mentioned in my MVVM post, I will be using the MVVM pattern throughout my code for reasons detailed in the post. By the way, the ViewModelExtension class in there allows me to do strongly-typed property changed notification, so rather than OnPropertyChanged("MyProperty"), I can do this.OnPropertyChanged(p => p.MyProperty). It's just a less error-prown approach, because if you don't spell "MyProperty" correctly using the first method, nothing will break, it just won't work. Adding a new page We currently have a couple of pages that are being dynamically (lazy) loaded, but now let's add a third page. 1. First, create a new Silverlight Application project: In this example I call it Page3. In the future you may prefer to use a different name, like DynamicXAPLoading.Page3, or even DynamicXAPLoading.Modules.Page3. It can be whatever you want. In my Task-It application I used the latter approach (with 'Modules' in the name). I do think of these application as 'modules', but Prism uses the same term, so some folks may not like that. Use whichever naming convention you feel is appropriate, but for now Page3 will do. When you change the name to Page3 and click OK, you will be presented with the Add New Project dialog: It is important that you leave the 'Host the Silverlight application in a new or existing Web site in the solution' checked, and the .Web project will be selected in the dropdown below. This will create the .xap file for this project under ClientBin in the .Web project, which is where we want it. 2. Uncheck the 'Add a test page that references the application' checkbox, and leave everything else as is. 3. Once the project is created, you can delete App.xaml and MainPage.xaml. 4. You will need to add references your new project to the following: DynamicXAPLoading.Infrastructure.dll (this is a Project reference) DynamicNavigation.dll (this is in the Libs directory under the DynamicXAPLoading project) System.ComponentModel.Composition.dll System.ComponentModel.Composition.Initialization.dll System.Windows.Controls.Navigation.dll If you have installed the latest RC bits you will find the last 3 dll's under the .NET tab in the Add Referenced dialog. They live in the following location, or if you are on a 64-bit machine like me, it will be Program Files (x86).       C:\Program Files\Microsoft SDKs\Silverlight\v4.0\Libraries\Client Now let's create some UI for our new project. 5. First, create a new Silverlight User Control called Page3.dyn.xaml 6. Paste the following code into the xaml: <dyn:DynamicPageShim xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"     xmlns:dyn="clr-namespace:DynamicNavigation;assembly=DynamicNavigation"     xmlns:my="clr-namespace:Page3;assembly=Page3">     <my:Page3Host /> </dyn:DynamicPageShim> This is just a 'shim', part of David Poll's technique for dynamic loading. 7. Expand the icon next to Page3.dyn.xaml and delete the code-behind file (Page3.dyn.xaml.cs). 8. Next we will create a control that will 'host' our page. Create another Silverlight User Control called Page3Host.xaml and paste in the following XAML: <dyn:DynamicPage x:Class="Page3.Page3Host"     xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"     xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"     xmlns:d="http://schemas.microsoft.com/expression/blend/2008"     xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"     xmlns:dyn="clr-namespace:DynamicNavigation;assembly=DynamicNavigation"     xmlns:Views="clr-namespace:Page3.Views"      mc:Ignorable="d"     d:DesignHeight="300" d:DesignWidth="400"     Title="Page 3">       <Views:Page3/>   </dyn:DynamicPage> 9. Now paste the following code into the code-behind for this control: using DynamicXAPLoading.Infrastructure;   namespace Page3 {     [PageMetadata(NavigateUri = "/Page3;component/Page3.dyn.xaml", Module = Enums.Page3)]     public partial class Page3Host     {         public Page3Host()         {             InitializeComponent();         }     } } Notice that we are now using that PageMetadata custom attribute class that we created in the Infrastructure project, and setting its two properties. NavigateUri - This tells it that the assembly is called Page3 (with a slash beforehand), and the page we want to load is Page3.dyn.xaml...our 'shim'. That line we added to the UriMapper in MainPage.xaml will use this information to load the page. Module - This goes back to that ModuleEnum class in our Infrastructure project. However, setting the Module to ModuleEnum.Page3 will cause a compilation error, so... 10. Go back to that Enums.cs under the Infrastructure project and add a 3rd entry for Page3: public enum ModuleEnum {     Page1,     Page2,     Page3 } 11. Now right-click on the Page3 project and add a folder called Views. 12. Right-click on the Views folder and create a new Silverlight User Control called Page3.xaml. We won't bother creating a view model for this User Control as I did in the Page 1 and Page 2 projects, just for the sake of simplicity. Feel free to add one if you'd like though, and copy the code from one of those other projects. Right now those view models aren't really doing anything anyway...though they will in my next post. :-) 13. Now let's replace the xaml for Page3.xaml with the following: <dyn:DynamicPage x:Class="Page3.Views.Page3"     xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"     xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"     xmlns:d="http://schemas.microsoft.com/expression/blend/2008"     xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"     xmlns:dyn="clr-namespace:DynamicNavigation;assembly=DynamicNavigation"     mc:Ignorable="d"     d:DesignHeight="300" d:DesignWidth="400"     Style="{StaticResource PageStyle}">       <Grid x:Name="LayoutRoot">         <ScrollViewer x:Name="PageScrollViewer" Style="{StaticResource PageScrollViewerStyle}">             <StackPanel x:Name="ContentStackPanel">                 <TextBlock x:Name="HeaderText" Style="{StaticResource HeaderTextStyle}" Text="Page 3"/>                 <TextBlock x:Name="ContentText" Style="{StaticResource ContentTextStyle}" Text="Page 3 content"/>             </StackPanel>         </ScrollViewer>     </Grid>   </dyn:DynamicPage> 14. And in the code-behind remove the inheritance from UserControl, so it should look like this: namespace Page3.Views {     public partial class Page3     {         public Page3()         {             InitializeComponent();         }     } } One thing you may have noticed is that the base class for the last two User Controls we created is DynamicPage. Once again, we are using the infrastructure that David Poll created. 15. OK, a few last things. We need a link on our main page so that we can access our new page. In MainPage.xaml let's update our links to look like this: <StackPanel x:Name="LinksStackPanel" Style="{StaticResource LinksStackPanelStyle}">     <HyperlinkButton Style="{StaticResource LinkStyle}" NavigateUri="/Home" TargetName="ContentFrame" Content="home"/>     <Rectangle Style="{StaticResource DividerStyle}"/>     <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 1" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage1}"/>     <Rectangle Style="{StaticResource DividerStyle}"/>     <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 2" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage2}"/>     <Rectangle Style="{StaticResource DividerStyle}"/>     <HyperlinkButton Style="{StaticResource LinkStyle}" Content="page 3" Command="{Binding NavigateCommand}" CommandParameter="{Binding ModulePage3}"/> </StackPanel> 16. Next, we need to add the following at the bottom of MainPageViewModel in the ViewModels directory of our DynamicXAPLoading project: public ModuleEnum ModulePage3 {     get { return ModuleEnum.Page3; } } 17. And at last, we need to add a case for our new page to the switch statement in MainPageViewModel: switch (module) {     case ModuleEnum.Page1:         DownloadPackage("Page1.xap");         break;     case ModuleEnum.Page2:         DownloadPackage("Page2.xap");         break;     case ModuleEnum.Page3:         DownloadPackage("Page3.xap");         break;     default:         break; } Now fire up the application and click the page 1, page 2 and page 3 links. What you'll notice is that there is a 2-second delay the first time you hit each page. That is because I added the following line to the Navigate method in MainPageViewModel: Thread.Sleep(2000); // Simulate a 2 second initial loading delay The reason I put this in there is that I wanted to simulate a delay the first time the page loads (as the .xap is being downloaded from the server). You'll notice that after the first hit to the page though that there is no delay...that's because the .xap has already been downloaded. Feel free to comment out this 2-second delay, or remove it if you'd like. I just wanted to show how subsequent hits to the page would be quicker than the initial one. By the way, you may want to display some sort of BusyIndicator while the .xap is loading. I have that in my Task-It appplication, but for the sake of simplicity I did not include it here. In the future I'll blog about how I show and hide the BusyIndicator using events (I'm currently using the eventing framework in Prism for that, but may move to the one in the MVVM Light Toolkit some time soon). Whew, that felt like a lot of steps, but it does work quite nicely. As I mentioned earlier, I'll try to find ways to simplify the code (I'd like to get away from having things like hard-coded .xap file names) and will blog about it in the future if I find a better way. In my next post, I'll talk more about what is actually happening with the code that makes this all work.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• SQL Server &ndash; Undelete a Table and Restore a Single Table from Backup

  - by Mladen Prajdic

  This post is part of the monthly community event called T-SQL Tuesday started by Adam Machanic (blog|twitter) and hosted by someone else each month. This month the host is Sankar Reddy (blog|twitter) and the topic is Misconceptions in SQL Server. You can follow posts for this theme on Twitter by looking at #TSQL2sDay hashtag. Let me start by saying: This code is a crazy hack that is to never be used unless you really, really have to. Really! And I don’t think there’s a time when you would really have to use it for real. Because it’s a hack there are number of things that can go wrong so play with it knowing that. I’ve managed to totally corrupt one database. :) Oh… and for those saying: yeah yeah.. you have a single table in a file group and you’re restoring that, I say “nay nay” to you. As we all know SQL Server can’t do single table restores from backup. This is kind of a obvious thing due to different relational integrity (RI) concerns. Since we have to maintain that we have to restore all tables represented in a RI graph. For this exercise i say BAH! to those concerns. Note that this method “works” only for simple tables that don’t have LOB and off rows data. The code can be expanded to include those but I’ve tried to leave things “simple”. Note that for this to work our table needs to be relatively static data-wise. This doesn’t work for OLTP table. Products are a perfect example of static data. They don’t change much between backups, pretty much everything depends on them and their table is one of those tables that are relatively easy to accidentally delete everything from. This only works if the database is in Full or Bulk-Logged recovery mode for tables where the contents have been deleted or truncated but NOT when a table was dropped. Everything we’ll talk about has to be done before the data pages are reused for other purposes. After deletion or truncation the pages are marked as reusable so you have to act fast. The best thing probably is to put the database into single user mode ASAP while you’re performing this procedure and return it to multi user after you’re done. How do we do it? We will be using an undocumented but known DBCC commands: DBCC PAGE, an undocumented function sys.fn_dblog and a little known DATABASE RESTORE PAGE option. All tests will be on a copy of Production.Product table in AdventureWorks database called Production.Product1 because the original table has FK constraints that prevent us from truncating it for testing. -- create a duplicate table. This doesn't preserve indexes!SELECT *INTO AdventureWorks.Production.Product1FROM AdventureWorks.Production.Product   After we run this code take a full back to perform further testing.   First let’s see what the difference between DELETE and TRUNCATE is when it comes to logging. With DELETE every row deletion is logged in the transaction log. With TRUNCATE only whole data page deallocations are logged in the transaction log. Getting deleted data pages is simple. All we have to look for is row delete entry in the sys.fn_dblog output. But getting data pages that were truncated from the transaction log presents a bit of an interesting problem. I will not go into depths of IAM(Index Allocation Map) and PFS (Page Free Space) pages but suffice to say that every IAM page has intervals that tell us which data pages are allocated for a table and which aren’t. If we deep dive into the sys.fn_dblog output we can see that once you truncate a table all the pages in all the intervals are deallocated and this is shown in the PFS page transaction log entry as deallocation of pages. For every 8 pages in the same extent there is one PFS page row in the transaction log. This row holds information about all 8 pages in CSV format which means we can get to this data with some parsing. A great help for parsing this stuff is Peter Debetta’s handy function dbo.HexStrToVarBin that converts hexadecimal string into a varbinary value that can be easily converted to integer tus giving us a readable page number. The shortened (columns removed) sys.fn_dblog output for a PFS page with CSV data for 1 extent (8 data pages) looks like this: -- [Page ID] is displayed in hex format. -- To convert it to readable int we'll use dbo.HexStrToVarBin function found at -- http://sqlblog.com/blogs/peter_debetta/archive/2007/03/09/t-sql-convert-hex-string-to-varbinary.aspx -- This function must be installed in the master databaseSELECT Context, AllocUnitName, [Page ID], DescriptionFROM sys.fn_dblog(NULL, NULL)WHERE [Current LSN] = '00000031:00000a46:007d' The pages at the end marked with 0x00—> are pages that are allocated in the extent but are not part of a table. We can inspect the raw content of each data page with a DBCC PAGE command: -- we need this trace flag to redirect output to the query window.DBCC TRACEON (3604); -- WITH TABLERESULTS gives us data in table format instead of message format-- we use format option 3 because it's the easiest to read and manipulate further onDBCC PAGE (AdventureWorks, 1, 613, 3) WITH TABLERESULTS   Since the DBACC PAGE output can be quite extensive I won’t put it here. You can see an example of it in the link at the beginning of this section. Getting deleted data back When we run a delete statement every row to be deleted is marked as a ghost record. A background process periodically cleans up those rows. A huge misconception is that the data is actually removed. It’s not. Only the pointers to the rows are removed while the data itself is still on the data page. We just can’t access it with normal means. To get those pointers back we need to restore every deleted page using the RESTORE PAGE option mentioned above. This restore must be done from a full backup, followed by any differential and log backups that you may have. This is necessary to bring the pages up to the same point in time as the rest of the data.  However the restore doesn’t magically connect the restored page back to the original table. It simply replaces the current page with the one from the backup. After the restore we use the DBCC PAGE to read data directly from all data pages and insert that data into a temporary table. To finish the RESTORE PAGE  procedure we finally have to take a tail log backup (simple backup of the transaction log) and restore it back. We can now insert data from the temporary table to our original table by hand. Getting truncated data back When we run a truncate the truncated data pages aren’t touched at all. Even the pointers to rows stay unchanged. Because of this getting data back from truncated table is simple. we just have to find out which pages belonged to our table and use DBCC PAGE to read data off of them. No restore is necessary. Turns out that the problems we had with finding the data pages is alleviated by not having to do a RESTORE PAGE procedure. Stop stalling… show me The Code! This is the code for getting back deleted and truncated data back. It’s commented in all the right places so don’t be afraid to take a closer look. Make sure you have a full backup before trying this out. Also I suggest that the last step of backing and restoring the tail log is performed by hand. USE masterGOIF OBJECT_ID('dbo.HexStrToVarBin') IS NULL RAISERROR ('No dbo.HexStrToVarBin installed. Go to http://sqlblog.com/blogs/peter_debetta/archive/2007/03/09/t-sql-convert-hex-string-to-varbinary.aspx and install it in master database' , 18, 1) SET NOCOUNT ONBEGIN TRY DECLARE @dbName VARCHAR(1000), @schemaName VARCHAR(1000), @tableName VARCHAR(1000), @fullBackupName VARCHAR(1000), @undeletedTableName VARCHAR(1000), @sql VARCHAR(MAX), @tableWasTruncated bit; /* THE FIRST LINE ARE OUR INPUT PARAMETERS In this case we're trying to recover Production.Product1 table in AdventureWorks database. My full backup of AdventureWorks database is at e:\AW.bak */ SELECT @dbName = 'AdventureWorks', @schemaName = 'Production', @tableName = 'Product1', @fullBackupName = 'e:\AW.bak', @undeletedTableName = '##' + @tableName + '_Undeleted', @tableWasTruncated = 0, -- copy the structure from original table to a temp table that we'll fill with restored data @sql = 'IF OBJECT_ID(''tempdb..' + @undeletedTableName + ''') IS NOT NULL DROP TABLE ' + @undeletedTableName + ' SELECT *' + ' INTO ' + @undeletedTableName + ' FROM [' + @dbName + '].[' + @schemaName + '].[' + @tableName + ']' + ' WHERE 1 = 0' EXEC (@sql) IF OBJECT_ID('tempdb..#PagesToRestore') IS NOT NULL DROP TABLE #PagesToRestore /* FIND DATA PAGES WE NEED TO RESTORE*/ CREATE TABLE #PagesToRestore ([ID] INT IDENTITY(1,1), [FileID] INT, [PageID] INT, [SQLtoExec] VARCHAR(1000)) -- DBCC PACE statement to run later RAISERROR ('Looking for deleted pages...', 10, 1) -- use T-LOG direct read to get deleted data pages INSERT INTO #PagesToRestore([FileID], [PageID], [SQLtoExec]) EXEC('USE [' + @dbName + '];SELECT FileID, PageID, ''DBCC TRACEON (3604); DBCC PAGE ([' + @dbName + '], '' + FileID + '', '' + PageID + '', 3) WITH TABLERESULTS'' as SQLToExecFROM (SELECT DISTINCT LEFT([Page ID], 4) AS FileID, CONVERT(VARCHAR(100), ' + 'CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING([Page ID], 6, 20)))) AS PageIDFROM sys.fn_dblog(NULL, NULL)WHERE AllocUnitName LIKE ''%' + @schemaName + '.' + @tableName + '%'' ' + 'AND Context IN (''LCX_MARK_AS_GHOST'', ''LCX_HEAP'') AND Operation in (''LOP_DELETE_ROWS''))t');SELECT *FROM #PagesToRestore -- if upper EXEC returns 0 rows it means the table was truncated so find truncated pages IF (SELECT COUNT(*) FROM #PagesToRestore) = 0 BEGIN RAISERROR ('No deleted pages found. Looking for truncated pages...', 10, 1) -- use T-LOG read to get truncated data pages INSERT INTO #PagesToRestore([FileID], [PageID], [SQLtoExec]) -- dark magic happens here -- because truncation simply deallocates pages we have to find out which pages were deallocated. -- we can find this out by looking at the PFS page row's Description column. -- for every deallocated extent the Description has a CSV of 8 pages in that extent. -- then it's just a matter of parsing it. -- we also remove the pages in the extent that weren't allocated to the table itself -- marked with '0x00-->00' EXEC ('USE [' + @dbName + '];DECLARE @truncatedPages TABLE(DeallocatedPages VARCHAR(8000), IsMultipleDeallocs BIT);INSERT INTO @truncatedPagesSELECT REPLACE(REPLACE(Description, ''Deallocated '', ''Y''), ''0x00-->00 '', ''N'') + '';'' AS DeallocatedPages, CHARINDEX('';'', Description) AS IsMultipleDeallocsFROM (SELECT DISTINCT LEFT([Page ID], 4) AS FileID, CONVERT(VARCHAR(100), CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING([Page ID], 6, 20)))) AS PageID, DescriptionFROM sys.fn_dblog(NULL, NULL)WHERE Context IN (''LCX_PFS'') AND Description LIKE ''Deallocated%'' AND AllocUnitName LIKE ''%' + @schemaName + '.' + @tableName + '%'') t;SELECT FileID, PageID , ''DBCC TRACEON (3604); DBCC PAGE ([' + @dbName + '], '' + FileID + '', '' + PageID + '', 3) WITH TABLERESULTS'' as SQLToExecFROM (SELECT LEFT(PageAndFile, 1) as WasPageAllocatedToTable , SUBSTRING(PageAndFile, 2, CHARINDEX('':'', PageAndFile) - 2 ) as FileID , CONVERT(VARCHAR(100), CONVERT(INT, master.dbo.HexStrToVarBin(SUBSTRING(PageAndFile, CHARINDEX('':'', PageAndFile) + 1, LEN(PageAndFile))))) as PageIDFROM ( SELECT SUBSTRING(DeallocatedPages, delimPosStart, delimPosEnd - delimPosStart) as PageAndFile, IsMultipleDeallocs FROM ( SELECT *, CHARINDEX('';'', DeallocatedPages)*(N-1) + 1 AS delimPosStart, CHARINDEX('';'', DeallocatedPages)*N AS delimPosEnd FROM @truncatedPages t1 CROSS APPLY (SELECT TOP (case when t1.IsMultipleDeallocs = 1 then 8 else 1 end) ROW_NUMBER() OVER(ORDER BY number) as N FROM master..spt_values) t2 )t)t)tWHERE WasPageAllocatedToTable = ''Y''') SELECT @tableWasTruncated = 1 END DECLARE @lastID INT, @pagesCount INT SELECT @lastID = 1, @pagesCount = COUNT(*) FROM #PagesToRestore SELECT @sql = 'Number of pages to restore: ' + CONVERT(VARCHAR(10), @pagesCount) IF @pagesCount = 0 RAISERROR ('No data pages to restore.', 18, 1) ELSE RAISERROR (@sql, 10, 1) -- If the table was truncated we'll read the data directly from data pages without restoring from backup IF @tableWasTruncated = 0 BEGIN -- RESTORE DATA PAGES FROM FULL BACKUP IN BATCHES OF 200 WHILE @lastID <= @pagesCount BEGIN -- create CSV string of pages to restore SELECT @sql = STUFF((SELECT ',' + CONVERT(VARCHAR(100), FileID) + ':' + CONVERT(VARCHAR(100), PageID) FROM #PagesToRestore WHERE ID BETWEEN @lastID AND @lastID + 200 ORDER BY ID FOR XML PATH('')), 1, 1, '') SELECT @sql = 'RESTORE DATABASE [' + @dbName + '] PAGE = ''' + @sql + ''' FROM DISK = ''' + @fullBackupName + '''' RAISERROR ('Starting RESTORE command:' , 10, 1) WITH NOWAIT; RAISERROR (@sql , 10, 1) WITH NOWAIT; EXEC(@sql); RAISERROR ('Restore DONE' , 10, 1) WITH NOWAIT; SELECT @lastID = @lastID + 200 END /* If you have any differential or transaction log backups you should restore them here to bring the previously restored data pages up to date */ END DECLARE @dbccSinglePage TABLE ( [ParentObject] NVARCHAR(500), [Object] NVARCHAR(500), [Field] NVARCHAR(500), [VALUE] NVARCHAR(MAX) ) DECLARE @cols NVARCHAR(MAX), @paramDefinition NVARCHAR(500), @SQLtoExec VARCHAR(1000), @FileID VARCHAR(100), @PageID VARCHAR(100), @i INT = 1 -- Get deleted table columns from information_schema view -- Need sp_executeSQL because database name can't be passed in as variable SELECT @cols = 'select @cols = STUFF((SELECT '', ['' + COLUMN_NAME + '']''FROM ' + @dbName + '.INFORMATION_SCHEMA.COLUMNSWHERE TABLE_NAME = ''' + @tableName + ''' AND TABLE_SCHEMA = ''' + @schemaName + '''ORDER BY ORDINAL_POSITIONFOR XML PATH('''')), 1, 2, '''')', @paramDefinition = N'@cols nvarchar(max) OUTPUT' EXECUTE sp_executesql @cols, @paramDefinition, @cols = @cols OUTPUT -- Loop through all the restored data pages, -- read data from them and insert them into temp table -- which you can then insert into the orignial deleted table DECLARE dbccPageCursor CURSOR GLOBAL FORWARD_ONLY FOR SELECT [FileID], [PageID], [SQLtoExec] FROM #PagesToRestore ORDER BY [FileID], [PageID] OPEN dbccPageCursor; FETCH NEXT FROM dbccPageCursor INTO @FileID, @PageID, @SQLtoExec; WHILE @@FETCH_STATUS = 0 BEGIN RAISERROR ('---------------------------------------------', 10, 1) WITH NOWAIT; SELECT @sql = 'Loop iteration: ' + CONVERT(VARCHAR(10), @i); RAISERROR (@sql, 10, 1) WITH NOWAIT; SELECT @sql = 'Running: ' + @SQLtoExec RAISERROR (@sql, 10, 1) WITH NOWAIT; -- if something goes wrong with DBCC execution or data gathering, skip it but print error BEGIN TRY INSERT INTO @dbccSinglePage EXEC (@SQLtoExec) -- make the data insert magic happen here IF (SELECT CONVERT(BIGINT, [VALUE]) FROM @dbccSinglePage WHERE [Field] LIKE '%Metadata: ObjectId%') = OBJECT_ID('['+@dbName+'].['+@schemaName +'].['+@tableName+']') BEGIN DELETE @dbccSinglePage WHERE NOT ([ParentObject] LIKE 'Slot % Offset %' AND [Object] LIKE 'Slot % Column %') SELECT @sql = 'USE tempdb; ' + 'IF (OBJECTPROPERTY(object_id(''' + @undeletedTableName + '''), ''TableHasIdentity'') = 1) ' + 'SET IDENTITY_INSERT ' + @undeletedTableName + ' ON; ' + 'INSERT INTO ' + @undeletedTableName + '(' + @cols + ') ' + STUFF((SELECT ' UNION ALL SELECT ' + STUFF((SELECT ', ' + CASE WHEN VALUE = '[NULL]' THEN 'NULL' ELSE '''' + [VALUE] + '''' END FROM ( -- the unicorn help here to correctly set ordinal numbers of columns in a data page -- it's turning STRING order into INT order (1,10,11,2,21 into 1,2,..10,11...21) SELECT [ParentObject], [Object], Field, VALUE, RIGHT('00000' + O1, 6) AS ParentObjectOrder, RIGHT('00000' + REVERSE(LEFT(O2, CHARINDEX(' ', O2)-1)), 6) AS ObjectOrder FROM ( SELECT [ParentObject], [Object], Field, VALUE, REPLACE(LEFT([ParentObject], CHARINDEX('Offset', [ParentObject])-1), 'Slot ', '') AS O1, REVERSE(LEFT([Object], CHARINDEX('Offset ', [Object])-2)) AS O2 FROM @dbccSinglePage WHERE t.ParentObject = ParentObject )t)t ORDER BY ParentObjectOrder, ObjectOrder FOR XML PATH('')), 1, 2, '') FROM @dbccSinglePage t GROUP BY ParentObject FOR XML PATH('') ), 1, 11, '') + ';' RAISERROR (@sql, 10, 1) WITH NOWAIT; EXEC (@sql) END END TRY BEGIN CATCH SELECT @sql = 'ERROR!!!' + CHAR(10) + CHAR(13) + 'ErrorNumber: ' + ERROR_NUMBER() + '; ErrorMessage' + ERROR_MESSAGE() + CHAR(10) + CHAR(13) + 'FileID: ' + @FileID + '; PageID: ' + @PageID RAISERROR (@sql, 10, 1) WITH NOWAIT; END CATCH DELETE @dbccSinglePage SELECT @sql = 'Pages left to process: ' + CONVERT(VARCHAR(10), @pagesCount - @i) + CHAR(10) + CHAR(13) + CHAR(10) + CHAR(13) + CHAR(10) + CHAR(13), @i = @i+1 RAISERROR (@sql, 10, 1) WITH NOWAIT; FETCH NEXT FROM dbccPageCursor INTO @FileID, @PageID, @SQLtoExec; END CLOSE dbccPageCursor; DEALLOCATE dbccPageCursor; EXEC ('SELECT ''' + @undeletedTableName + ''' as TableName; SELECT * FROM ' + @undeletedTableName)END TRYBEGIN CATCH SELECT ERROR_NUMBER() AS ErrorNumber, ERROR_MESSAGE() AS ErrorMessage IF CURSOR_STATUS ('global', 'dbccPageCursor') >= 0 BEGIN CLOSE dbccPageCursor; DEALLOCATE dbccPageCursor; ENDEND CATCH-- if the table was deleted we need to finish the restore page sequenceIF @tableWasTruncated = 0BEGIN -- take a log tail backup and then restore it to complete page restore process DECLARE @currentDate VARCHAR(30) SELECT @currentDate = CONVERT(VARCHAR(30), GETDATE(), 112) RAISERROR ('Starting Log Tail backup to c:\Temp ...', 10, 1) WITH NOWAIT; PRINT ('BACKUP LOG [' + @dbName + '] TO DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') EXEC ('BACKUP LOG [' + @dbName + '] TO DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') RAISERROR ('Log Tail backup done.', 10, 1) WITH NOWAIT; RAISERROR ('Starting Log Tail restore from c:\Temp ...', 10, 1) WITH NOWAIT; PRINT ('RESTORE LOG [' + @dbName + '] FROM DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') EXEC ('RESTORE LOG [' + @dbName + '] FROM DISK = ''c:\Temp\' + @dbName + '_TailLogBackup_' + @currentDate + '.trn''') RAISERROR ('Log Tail restore done.', 10, 1) WITH NOWAIT;END-- The last step is manual. Insert data from our temporary table to the original deleted table The misconception here is that you can do a single table restore properly in SQL Server. You can't. But with little experimentation you can get pretty close to it. One way to possible remove a dependency on a backup to retrieve deleted pages is to quickly run a similar script to the upper one that gets data directly from data pages while the rows are still marked as ghost records. It could be done if we could beat the ghost record cleanup task.

  Read the article

• How to Run Low-Cost Minecraft on a Raspberry Pi for Block Building on the Cheap

  - by Jason Fitzpatrick

  We’ve shown you how to run your own blocktastic personal Minecraft server on a Windows/OSX box, but what if you crave something lighter weight, more energy efficient, and always ready for your friends? Read on as we turn a tiny Raspberry Pi machine into a low-cost Minecraft server you can leave on 24/7 for around a penny a day. Why Do I Want to Do This? There’s two aspects to this tutorial, running your own Minecraft server and specifically running that Minecraft server on a Raspberry Pi. Why would you want to run your own Minecraft server? It’s a really great way to extend and build upon the Minecraft play experience. You can leave the server running when you’re not playing so friends and family can join and continue building your world. You can mess around with game variables and introduce mods in a way that isn’t possible when you’re playing the stand-alone game. It also gives you the kind of control over your multiplayer experience that using public servers doesn’t, without incurring the cost of hosting a private server on a remote host. While running a Minecraft server on its own is appealing enough to a dedicated Minecraft fan, running it on the Raspberry Pi is even more appealing. The tiny little Pi uses so little resources that you can leave your Minecraft server running 24/7 for a couple bucks a year. Aside from the initial cost outlay of the Pi, an SD card, and a little bit of time setting it up, you’ll have an always-on Minecraft server at a monthly cost of around one gumball. What Do I Need? For this tutorial you’ll need a mix of hardware and software tools; aside from the actual Raspberry Pi and SD card, everything is free. 1 Raspberry Pi (preferably a 512MB model) 1 4GB+ SD card This tutorial assumes that you have already familiarized yourself with the Raspberry Pi and have installed a copy of the Debian-derivative Raspbian on the device. If you have not got your Pi up and running yet, don’t worry! Check out our guide, The HTG Guide to Getting Started with Raspberry Pi, to get up to speed. Optimizing Raspbian for the Minecraft Server Unlike other builds we’ve shared where you can layer multiple projects over one another (e.g. the Pi is more than powerful enough to serve as a weather/email indicator and a Google Cloud Print server at the same time) running a Minecraft server is a pretty intense operation for the little Pi and we’d strongly recommend dedicating the entire Pi to the process. Minecraft seems like a simple game, with all its blocky-ness and what not, but it’s actually a pretty complex game beneath the simple skin and required a lot of processing power. As such, we’re going to tweak the configuration file and other settings to optimize Rasbian for the job. The first thing you’ll need to do is dig into the Raspi-Config application to make a few minor changes. If you’re installing Raspbian fresh, wait for the last step (which is the Raspi-Config), if you already installed it, head to the terminal and type in “sudo raspi-config” to launch it again. One of the first and most important things we need to attend to is cranking up the overclock setting. We need all the power we can get to make our Minecraft experience enjoyable. In Raspi-Config, select option number 7 “Overclock”. Be prepared for some stern warnings about overclocking, but rest easy knowing that overclocking is directly supported by the Raspberry Pi foundation and has been included in the configuration options since late 2012. Once you’re in the actual selection screen, select “Turbo 1000MhHz”. Again, you’ll be warned that the degree of overclocking you’ve selected carries risks (specifically, potential corruption of the SD card, but no risk of actual hardware damage). Click OK and wait for the device to reset. Next, make sure you’re set to boot to the command prompt, not the desktop. Select number 3 “Enable Boot to Desktop/Scratch”  and make sure “Console Text console” is selected. Back at the Raspi-Config menu, select number 8 “Advanced Options’. There are two critical changes we need to make in here and one option change. First, the critical changes. Select A3 “Memory Split”: Change the amount of memory available to the GPU to 16MB (down from the default 64MB). Our Minecraft server is going to ruin in a GUI-less environment; there’s no reason to allocate any more than the bare minimum to the GPU. After selecting the GPU memory, you’ll be returned to the main menu. Select “Advanced Options” again and then select A4 “SSH”. Within the sub-menu, enable SSH. There is very little reason to keep this Pi connected to a monitor and keyboard, by enabling SSH we can remotely access the machine from anywhere on the network. Finally (and optionally) return again to the “Advanced Options” menu and select A2 “Hostname”. Here you can change your hostname from “raspberrypi” to a more fitting Minecraft name. We opted for the highly creative hostname “minecraft”, but feel free to spice it up a bit with whatever you feel like: creepertown, minecraft4life, or miner-box are all great minecraft server names. That’s it for the Raspbian configuration tab down to the bottom of the main screen and select “Finish” to reboot. After rebooting you can now SSH into your terminal, or continue working from the keyboard hooked up to your Pi (we strongly recommend switching over to SSH as it allows you to easily cut and paste the commands). If you’ve never used SSH before, check out how to use PuTTY with your Pi here. Installing Java on the Pi The Minecraft server runs on Java, so the first thing we need to do on our freshly configured Pi is install it. Log into your Pi via SSH and then, at the command prompt, enter the following command to make a directory for the installation: sudo mkdir /java/ Now we need to download the newest version of Java. At the time of this publication the newest release is the OCT 2013 update and the link/filename we use will reflect that. Please check for a more current version of the Linux ARMv6/7 Java release on the Java download page and update the link/filename accordingly when following our instructions. At the command prompt, enter the following command: sudo wget --no-check-certificate http://www.java.net/download/jdk8/archive/b111/binaries/jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz Once the download has finished successfully, enter the following command: sudo tar zxvf jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz -C /opt/ Fun fact: the /opt/ directory name scheme is a remnant of early Unix design wherein the /opt/ directory was for “optional” software installed after the main operating system; it was the /Program Files/ of the Unix world. After the file has finished extracting, enter: sudo /opt/jdk1.8.0/bin/java -version This command will return the version number of your new Java installation like so: java version "1.8.0-ea" Java(TM) SE Runtime Environment (build 1.8.0-ea-b111) Java HotSpot(TM) Client VM (build 25.0-b53, mixed mode) If you don’t see the above printout (or a variation thereof if you’re using a newer version of Java), try to extract the archive again. If you do see the readout, enter the following command to tidy up after yourself: sudo rm jdk-8-ea-b111-linux-arm-vfp-hflt-09_oct_2013.tar.gz At this point Java is installed and we’re ready to move onto installing our Minecraft server! Installing and Configuring the Minecraft Server Now that we have a foundation for our Minecraft server, it’s time to install the part that matter. We’ll be using SpigotMC a lightweight and stable Minecraft server build that works wonderfully on the Pi. First, grab a copy of the the code with the following command: sudo wget http://ci.md-5.net/job/Spigot/lastSuccessfulBuild/artifact/Spigot-Server/target/spigot.jar This link should remain stable over time, as it points directly to the most current stable release of Spigot, but if you have any issues you can always reference the SpigotMC download page here. After the download finishes successfully, enter the following command: sudo /opt/jdk1.8.0/bin/java -Xms256M -Xmx496M -jar /home/pi/spigot.jar nogui Note: if you’re running the command on a 256MB Pi change the 256 and 496 in the above command to 128 and 256, respectively. Your server will launch and a flurry of on-screen activity will follow. Be prepared to wait around 3-6 minutes or so for the process of setting up the server and generating the map to finish. Future startups will take much less time, around 20-30 seconds. Note: If at any point during the configuration or play process things get really weird (e.g. your new Minecraft server freaks out and starts spawning you in the Nether and killing you instantly), use the “stop” command at the command prompt to gracefully shutdown the server and let you restart and troubleshoot it. After the process has finished, head over to the computer you normally play Minecraft on, fire it up, and click on Multiplayer. You should see your server: If your world doesn’t popup immediately during the network scan, hit the Add button and manually enter the address of your Pi. Once you connect to the server, you’ll see the status change in the server status window: According to the server, we’re in game. According to the actual Minecraft app, we’re also in game but it’s the middle of the night in survival mode: Boo! Spawning in the dead of night, weaponless and without shelter is no way to start things. No worries though, we need to do some more configuration; no time to sit around and get shot at by skeletons. Besides, if you try and play it without some configuration tweaks first, you’ll likely find it quite unstable. We’re just here to confirm the server is up, running, and accepting incoming connections. Once we’ve confirmed the server is running and connectable (albeit not very playable yet), it’s time to shut down the server. Via the server console, enter the command “stop” to shut everything down. When you’re returned to the command prompt, enter the following command: sudo nano server.properties When the configuration file opens up, make the following changes (or just cut and paste our config file minus the first two lines with the name and date stamp): #Minecraft server properties #Thu Oct 17 22:53:51 UTC 2013 generator-settings= #Default is true, toggle to false allow-nether=false level-name=world enable-query=false allow-flight=false server-port=25565 level-type=DEFAULT enable-rcon=false force-gamemode=false level-seed= server-ip= max-build-height=256 spawn-npcs=true white-list=false spawn-animals=true texture-pack= snooper-enabled=true hardcore=false online-mode=true pvp=true difficulty=1 player-idle-timeout=0 gamemode=0 #Default 20; you only need to lower this if you're running #a public server and worried about loads. max-players=20 spawn-monsters=true #Default is 10, 3-5 ideal for Pi view-distance=5 generate-structures=true spawn-protection=16 motd=A Minecraft Server In the server status window, seen through your SSH connection to the pi, enter the following command to give yourself operator status on your Minecraft server (so that you can use more powerful commands in game, without always returning to the server status window). op [your minecraft nickname] At this point things are looking better but we still have a little tweaking to do before the server is really enjoyable. To that end, let’s install some plugins. The first plugin, and the one you should install above all others, is NoSpawnChunks. To install the plugin, first visit the NoSpawnChunks webpage and grab the download link for the most current version. As of this writing the current release is v0.3. Back at the command prompt (the command prompt of your Pi, not the server console–if your server is still active shut it down) enter the following commands: cd /home/pi/plugins sudo wget http://dev.bukkit.org/media/files/586/974/NoSpawnChunks.jar Next, visit the ClearLag plugin page, and grab the latest link (as of this tutorial, it’s v2.6.0). Enter the following at the command prompt: sudo wget http://dev.bukkit.org/media/files/743/213/Clearlag.jar Because the files aren’t compressed in a .ZIP or similar container, that’s all there is to it: the plugins are parked in the plugin directory. (Remember this for future plugin downloads, the file needs to be whateverplugin.jar, so if it’s compressed you need to uncompress it in the plugin directory.) Resart the server: sudo /opt/jdk1.8.0/bin/java -Xms256M -Xmx496M -jar /home/pi/spigot.jar nogui Be prepared for a slightly longer startup time (closer to the 3-6 minutes and much longer than the 30 seconds you just experienced) as the plugins affect the world map and need a minute to massage everything. After the spawn process finishes, type the following at the server console: plugins This lists all the plugins currently active on the server. You should see something like this: If the plugins aren’t loaded, you may need to stop and restart the server. After confirming your plugins are loaded, go ahead and join the game. You should notice significantly snappier play. In addition, you’ll get occasional messages from the plugins indicating they are active, as seen below: At this point Java is installed, the server is installed, and we’ve tweaked our settings for for the Pi.  It’s time to start building with friends!     

  Read the article

• Stop Spinning Your Wheels&hellip; Sage Advice for Aspiring Developers

  - by Mark Rackley

  So… lately I’ve been tasked with helping bring some non-developers over the hump and become full-fledged, all around, SharePoint developers. Well, only time will tell if I’m successful or a complete failure. Good thing about failures though, you know what NOT to do next time! Anyway, I’ve been writing some sort of code since I was about 10 years old; so I sometimes take for granted the effort some people have to go through to learn a new technology. I guess if I had to say I was an “expert” in one thing it would be learning (and getting “stuff” done) in new technologies. Maybe that’s why I’ve embraced SharePoint and the SharePoint community. SharePoint is the first technology I haven’t been able to master or get everything done without help from other people. I KNOW I’ll never know it all and I learn something new every day.  It keeps it interesting, it keeps me motivated, and keeps me involved. So, what some people may consider a downside of SharePoint, I definitely consider a plus. Crap.. I’m rambling. Where was I? Oh yeah… me trying to be helpful. Like I said, I am able to quickly and effectively pick up new languages, technology, etc. and put it to good use. Am I just brilliant? Well, my mom thinks so.. but maybe not. Maybe I’ve just been doing it for a long time…. 25 years in some form or fashion… wow I’m old… Anyway, what I lack in depth I make up for in breadth and being the “go-to” guy wherever I work when someone needs to “get stuff done”.  Let’s see if I can take some of that experience and put it to practical use to help new people get up to speed faster, learn things more effectively, and become that go-to guy. First off…  make sure you… Know The Basics I don’t have the time to teach new developers the basics, but you gotta know them. I’ve only been “taught” two languages.. Fortran 77 and C… everything else I’ve picked up from “doing”. I HAD to know the basics though, and all new developers need to understand the very basics of development.  97.23% of all languages will have the following: Variables Functions Arrays If statements For loops / While loops If you think about it, most development is “if this, do this… or while this, do this…”.  “This” may be some unique method to your language or something you develop, but the basics are the basics. YES there are MANY other development topics you need to understand, but you shouldn’t be scratching your head trying to figure out what a ”for loop” is… (Also learn about classes and hashtables as quickly as possible). Once you have the basics down it makes it much easier to… Learn By Doing This may just apply to me and my warped brain.  I don’t learn a new technology by reading or hearing someone speak about it. I learn by doing. It does me no good to try and learn all of the intricacies of a new language or technology inside-and-out before getting my hands dirty. Just show me how to do one thing… let me get that working… then show me how to do the next thing.. let me get that working… Now, let’s see what I can figure out on my own. Okay.. now it starts to make sense. I see how the language works, I can step through the code, and before you know it.. I’m productive in a new technology. Be careful here though…. make sure you… Don’t Reinvent The Wheel People have been writing code for what… 50+ years now? So, why are you trying to tackle ANYTHING without first Googling it with Bing to see what others have done first? When I was first learning C# (I had come from a Java background) I had to call a web service.  Sure! No problem! I’d done this many times in Java. So, I proceeded to write an HTTP Handler, called the Web Service and it worked like a charm!!!  Probably about 2.3 seconds after I got it working completely someone says to me “Why didn’t you just add a Web Reference?” Really? You can do that?  oops… I just wasted a lot of time. Before undertaking the development of any sort of utility method in a new language, make sure it’s not already handled for you… Okay… you are starting to write some code and are curious about the possibilities? Well… don’t just sit there… Try It And See What Happens This is actually one of my biggest pet peeves. “So… ‘x++’ works in C#, but does it also work in JavaScript?”   Really? Did you just ask me that? In the time it spent for you to type that email, press the send button, me receive the email, get around to reading it, and replying with “yes” you could have tested it 47 times and know the answer! Just TRY it! See what happens! You aren’t doing brain surgery. You aren’t going to kill anyone, and you BETTER not be developing in production. So, you are not going to crash any production systems!! Seriously! Get off your butt and just try it yourself. The extra added benefit is that it doesn’t work, the absolute best way to learn is to… Learn From Your Failures I don’t know about you… but if I screw up and something doesn’t work, I learn A LOT more debugging my problem than if everything magically worked. It’s okay that you aren’t perfect! Not everyone can be me? In the same vein… don’t ask someone else to debug your problem until you have made a valiant attempt to do so yourself. There’s nothing quite like stepping through code line by line to see what it’s REALLY doing… and you’ll never feel more stupid sometimes than when you realize WHY it’s not working.. but you realize... you learn... and you remember. There is nothing wrong with failure as long as you learn from it. As you start writing more and more and more code make sure that you ALWAYS… Develop for Production You will soon learn that the “prototype” you wrote last week to show as a “proof of concept” is going to go directly into production no matter how much you beg and plead and try to explain it’s not ready to go into production… it’s going to go straight there.. and it’s like herpes.. it doesn’t go away and there’s no fixing it once it’s in there.  So, why not write ALL your code like it will be put in production? It MIGHT take a little longer, but in the long run it will be easier to maintain, get help on, and you won’t be embarrassed that it’s sitting on a production server for everyone to use and see. So, now that you are getting comfortable and writing code for production it is important to to remember the… KISS Principle… Learn It… Love It… Keep It Simple Stupid Seriously.. don’t try to show how smart you are by writing the most complicated code in history. Break your problem up into discrete steps and write each step. If it turns out you have some redundancy, you can always go back and tweak your code later.  How bad is it when you write code that LOOKS cocky? I’ve seen it before… some of the most abstract and complicated classes when a class wasn’t even needed! Or the most elaborate unreadable code jammed into one really long line when it could have been written in three lines, performed just as well, and been SOOO much easier to maintain. Keep it clear and simple.. baby steps people. This will help you learn the technology, debug problems, AND it will help others help you find your problems if they don’t have to decipher the Dead Sea Scrolls just to figure out what you are trying to do…. Really.. don’t be that guy… try to curb your ego and… Keep an Open Mind No matter how smart you are… how fast you type… or how much you get paid, don’t let your ego get in the way. There is probably a better way to do everything you’ve ever done. Don’t become so cocky that you can’t think someone knows more than you. There’s a lot of brilliant, helpful people out there willing to show you tricks if you just give them a chance. A very super-awesome developer once told me “So what if you’ve been writing code for 10 years or more! Does your code look basically the same? Are you not growing as a developer?” Those 10 years become pretty meaningless if you just “know” that you are right and have not picked up new tips, tricks, methods, and patterns along the way. Learn from others and find out what’s new in development land (you know you don’t have to specifically use pointers anymore??). Along those same lines… If it’s not working, first assume you are doing something wrong. You have no idea how much it annoys people who are trying to help you when you first assume that the help they are trying to give you is wrong. Just MAYBE… you… the person learning is making some small mistake? Maybe you didn’t describe your problem correctly? Maybe you are using the wrong terminology? “I did exactly what you said and it didn’t work.”  Oh really? Are you SURE about that? “Your solution doesn’t work.”  Well… I’m pretty sure it works, I’ve used it 200 times… What are you doing differently? First try some humility and appreciation.. it will go much further, especially when it turns out YOU are the one that is wrong. When all else fails…. Try Professional Training Some people just don’t have the mindset to go and figure stuff out. It’s a gift and not everyone has it. If everyone could do it I wouldn’t have a job and there wouldn’t be professional training available.  So, if you’ve tried everything else and no light bulbs are coming on, contact the experts who specialize in training. Be careful though, there is bad training out there. Want to know the names of some good places? Just shoot me a message and I’ll let you know. I’m boycotting endorsing Andrew Connell anymore until I get that free course dangit!! So… that’s it.. that’s all I got right now. Maybe you thought all of this is common sense, maybe you think I’m smoking crack. If so, don’t just sit there, there’s a comments section for a reason. Finally, what about you? What tips do you have to help this aspiring to learn the dark arts??

  Read the article

• Automatic Standby Recreation for Data Guard

  - by pablo.boixeda(at)oracle.com

  Hi,Unfortunately sometimes a Standby Instance needs to be recreated. This can happen for many reasons such as lost archive logs, standby data files, failover, among others.This is why we wanted to have one script to recreate standby instances in an easy way.This script recreates the standby considering some prereqs:-Database Version should be at least 11gR1-Dummy instance started on the standby node (Seeking to improve this so it won't be needed)-Broker configuration hasn't been removed-In our case we have two TNSNAMES files, one for the Standby creation (using SID) and the other one for production using service names (including broker service name)-Some environment variables set up by the environment db script (like ORACLE_HOME, PATH...)-The directory tree should not have been modified in the stanby hostWe are currently using it on our 11gR2 Data Guard tests.Any improvements will be welcome! Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} #!/bin/ksh ###    NOMBRE / VERSION ###       recrea_dg.sh   v.1.00 ### ###    DESCRIPCION ###       reacreacion de la Standby ### ###    DEVUELVE ###       0 Creacion de STANDBY correcta ###       1 Fallo ### ###    NOTAS ###       Este shell script NO DEBE MODIFICARSE. ###       Todas las variables y constantes necesarias se toman del entorno. ### ###    MODIFICADO POR:    FECHA:        COMENTARIOS: ###    ---------------    ----------    ------------------------------------- ###      Oracle           15/02/2011    Creacion. ### ### ### Cargar entorno ### V_ADMIN_DIR=`dirname $0` . ${V_ADMIN_DIR}/entorno_bd.sh 1>>/dev/null if [ $? -ne 0 ] then   echo "Error Loading the environment."   exit 1 fi V_RET=0 V_DATE=`/bin/date` V_DATE_F=`/bin/date +%Y%m%d_%H%M%S` V_LOGFILE=${V_TRAZAS}/recrea_dg_${V_DATE_F}.log exec 4>&1 tee ${V_FICH_LOG} >&4 |& exec 1>&p 2>&1 ### ### Variables para Recrear el Data Guard ### V_DB_BR=`echo ${V_DB_NAME}|tr '[:lower:]' '[:upper:]'` if [ "${ORACLE_SID}" = "${V_DB_NAME}01" ] then         V_LOCAL_BR=${V_DB_BR}'01'         V_REMOTE_BR=${V_DB_BR}'02' else         V_LOCAL_BR=${V_DB_BR}'02'         V_REMOTE_BR=${V_DB_BR}'01' fi echo " Getting local instance ROLE ${ORACLE_SID} ..." sqlplus -s /nolog 1>>/dev/null 2>&1 <<-! whenever sqlerror exit 1 connect / as sysdba variable salida number declare   v_database_role v\$database.database_role%type; begin   select database_role into v_database_role from v\$database;   :salida := case v_database_role        when 'PRIMARY' then 2        when 'PHYSICAL STANDBY' then 3        else 4      end; end; / exit :salida ! case $? in 1) echo " ERROR: Cannot get instance ROLE ." | tee -a ${V_LOGFILE}   2>&1    V_RET=1 ;; 2) echo " Local Instance with PRIMARY role." | tee -a ${V_LOGFILE}   2>&1    V_DB_ROLE_LCL=PRIMARY ;; 3) echo " Local Instance with PHYSICAL STANDBY role." | tee -a ${V_LOGFILE}   2>&1    V_DB_ROLE_LCL=STANDBY ;; *) echo " ERROR: UNKNOWN ROLE." | tee -a ${V_LOGFILE}   2>&1    V_RET=1 ;; esac if [ "${V_DB_ROLE_LCL}" = "PRIMARY" ] then         echo "####################################################################" | tee -a ${V_LOGFILE}   2>&1         echo "${V_DATE} - Reacreating  STANDBY Instance." | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         echo "DATAFILES, CONTROL FILES, REDO LOGS and ARCHIVE LOGS in standby instance ${V_REMOTE_BR} will be removed" | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         V_PRIMARY=${V_LOCAL_BR}         V_STANDBY=${V_REMOTE_BR} fi if [ "${V_DB_ROLE_LCL}" = "STANDBY" ] then         echo "####################################################################" | tee -a ${V_LOGFILE}   2>&1         echo "${V_DATE} - Reacreating  STANDBY Instance." | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         echo "DATAFILES, CONTROL FILES, REDO LOGS and ARCHIVE LOGS in standby instance ${V_LOCAL_BR} will be removed" | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         V_PRIMARY=${V_REMOTE_BR}         V_STANDBY=${V_LOCAL_BR} fi # Cargamos las variables de los hosts # Cargamos las variables de los hosts PRY_HOST=`sqlplus  /nolog << EOF | grep KEEP | sed 's/KEEP//;s/[   ]//g' connect sys/${V_DB_PWD}@${V_PRIMARY} as sysdba select 'KEEP',host_name from v\\$instance; EOF` SBY_HOST=`sqlplus  /nolog << EOF | grep KEEP | sed 's/KEEP//;s/[   ]//g' connect sys/${V_DB_PWD}@${V_STANDBY} as sysdba select 'KEEP',host_name from v\\$instance; EOF` echo "el HOST primary es: ${PRY_HOST}" | tee -a ${V_LOGFILE}   2>&1 echo "el HOST standby es: ${SBY_HOST}" | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 ## ## Paramos la instancia STANDBY ## V_DATE=`/bin/date` echo "${V_DATE} - Shutting down Standby instance" | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 ## ## Paramos la instancia STANDBY ## SBY_STATUS=`sqlplus  /nolog << EOF | grep KEEP | sed 's/KEEP//;s/[   ]//g' connect sys/${V_DB_PWD}@${V_STANDBY} as sysdba select 'KEEP',status from v\\$instance; EOF` if [ ${SBY_STATUS} = 'STARTED' ] || [ ${SBY_STATUS} = 'MOUNTED' ] || [ ${SBY_STATUS} = 'OPEN' ] then         echo "${V_DATE} - Standby instance shutdown in progress..." | tee -a ${V_LOGFILE}   2>&1         echo "" | tee -a ${V_LOGFILE}   2>&1         echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1         sqlplus -s /nolog 1>>/dev/null 2>&1 <<-!         whenever sqlerror exit 1         connect sys/${V_DB_PWD}@${V_STANDBY} as sysdba         shutdown abort         ! fi V_DATE=`/bin/date` echo "" echo "${V_DATE} - Standby instance stopped" | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 ## ## Eliminamos los ficheros de la base de datos ## V_SBY_SID=`echo ${V_STANDBY}|tr '[:upper:]' '[:lower:]'` V_PRY_SID=`echo ${V_PRIMARY}|tr '[:upper:]' '[:lower:]'` ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/data/*.dbf ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/arch/*.arc ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/ctl/*.ctl ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/redo/*.ctl ssh ${SBY_HOST} rm /opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/redo/*.rdo ## ## Startup nomount stby instance ## V_DATE=`/bin/date` echo "" | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} - Starting  DUMMY Standby Instance " | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 ssh ${SBY_HOST} touch /home/oracle/init_dg.ora ssh ${SBY_HOST} 'echo "DB_NAME='${V_DB_NAME}'">>/home/oracle/init_dg.ora' ssh ${SBY_HOST} touch /home/oracle/start_dummy.sh ssh ${SBY_HOST} 'echo "ORACLE_HOME=/opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2 ">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "export ORACLE_HOME">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "PATH=\$ORACLE_HOME/bin:\$PATH">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "export PATH">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "ORACLE_SID='${V_SBY_SID}'">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "export ORACLE_SID">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "sqlplus -s /nolog <<-!" >>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "      whenever sqlerror exit 1 ">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "      connect / as sysdba ">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "      startup nomount pfile='\''/home/oracle/init_dg.ora'\''">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'echo "! ">>/home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'chmod 744 /home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'sh /home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'rm /home/oracle/start_dummy.sh' ssh ${SBY_HOST} 'rm /home/oracle/init_dg.ora' ## ## TNSNAMES change, specific for RMAN duplicate ## V_DATE=`/bin/date` echo "" | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} - Setting up TNSNAMES in PRIMARY host " | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 ssh ${PRY_HOST} 'cp /opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2/network/admin/tnsnames.ora.inst  /opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2/network/admin/tnsnames.ora' V_DATE=`/bin/date` echo "" | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} - Starting STANDBY creation with RMAN.. " | tee -a ${V_LOGFILE}   2>&1 echo "" | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************" | tee -a ${V_LOGFILE}   2>&1 rman<<-! >>${V_LOGFILE} connect target sys/${V_DB_PWD}@${V_PRIMARY} connect auxiliary sys/${V_DB_PWD}@${V_STANDBY} run { allocate channel prmy1 type disk; allocate channel prmy2 type disk; allocate channel prmy3 type disk; allocate channel prmy4 type disk; allocate auxiliary channel stby type disk; duplicate target database for standby from active database dorecover spfile parameter_value_convert '${V_PRY_SID}','${V_SBY_SID}' set control_files='/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/ctl/control01.ctl','/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/redo/control02.ctl' set db_file_name_convert='/opt/oracle/db/db${V_DB_NAME}/${V_PRY_SID}/','/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/' set log_file_name_convert='/opt/oracle/db/db${V_DB_NAME}/${V_PRY_SID}/','/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/' set 'db_unique_name'='${V_SBY_SID}' set log_archive_config='DG_CONFIG=(${V_PRIMARY},${V_STANDBY})' set fal_client='${V_STANDBY}' set fal_server='${V_PRIMARY}' set log_archive_dest_1='LOCATION=/opt/oracle/db/db${V_DB_NAME}/${V_SBY_SID}/arch DB_UNIQUE_NAME=${V_SBY_SID} MANDATORY VALID_FOR=(ALL_LOGFILES,ALL_ROLES)' set log_archive_dest_2='SERVICE="${V_PRIMARY}"','SYNC AFFIRM DB_UNIQUE_NAME=${V_PRY_SID} DELAY=0 MAX_FAILURE=0 REOPEN=300 REGISTER VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE)' nofilenamecheck ; } ! V_DATE=`/bin/date` if [ $? -ne 0 ] then         echo ""         echo "${V_DATE} - Error creating STANDBY instance"         echo ""         echo "********************************************************************************" else         echo ""         echo "${V_DATE} - STANDBY instance created SUCCESSFULLY "         echo ""         echo "********************************************************************************" fi sqlplus -s /nolog 1>>/dev/null 2>&1 <<-!         whenever sqlerror exit 1         connect sys/${V_DB_PWD}@${V_STANDBY} as sysdba         alter system set local_listener='(ADDRESS=(PROTOCOL=TCP)(HOST=${SBY_HOST})(PORT=1544))' scope=both;         alter system set service_names='${V_DB_NAME}.eu.roca.net,${V_SBY_SID}.eu.roca.net,${V_SBY_SID}_DGMGRL.eu.roca.net' scope=both;         alter database recover managed standby database using current logfile disconnect from session;         alter system set dg_broker_start=true scope=both; ! ## ## TNSNAMES change, back to Production Mode ## V_DATE=`/bin/date` echo " " | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} - Restoring TNSNAMES in PRIMARY "  | tee -a ${V_LOGFILE}   2>&1 echo ""  | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************"  | tee -a ${V_LOGFILE}   2>&1 ssh ${PRY_HOST} 'cp /opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2/network/admin/tnsnames.ora.prod  /opt/oracle/db/db'${V_DB_NAME}'/soft/db11.2.0.2/network/admin/tnsnames.ora' echo ""  | tee -a ${V_LOGFILE}   2>&1 echo "${V_DATE} -  Waiting for media recovery before check the DATA GUARD Broker"  | tee -a ${V_LOGFILE}   2>&1 echo ""  | tee -a ${V_LOGFILE}   2>&1 echo "********************************************************************************"  | tee -a ${V_LOGFILE}   2>&1 sleep 200 dgmgrl <<-! | grep SUCCESS 1>/dev/null 2>&1     connect ${V_DB_USR}/${V_DB_PWD}@${V_STANDBY}     show configuration verbose; ! if [ $? -ne 0 ] ; then         echo "       ERROR: El status del Broker no es SUCCESS" | tee -a ${V_LOGFILE}   2>&1 ;         V_RET=1 else          echo "      DATA GUARD OK " | tee -a ${V_LOGFILE}   2>&1 ; Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}         V_RET=0 fi Hope it helps.

  Read the article

• MSCC: Global Windows Azure Bootcamp

  Mauritius participated and contributed to the Global Windows Azure Bootcamp 2014 (GWAB). Again! And this time stronger than ever, and together with 137 other locations in 56 countries world-wide. We had 62 named registrations, 7 guest additions and approximately 10 offline participants prior to the event day. Most interestingly the organisation of the GWAB through the MSCC helped to increased the number of craftsmen. The Mauritius Software Craftsmanship Community has currently 138 registered members - in less than one year! Only with those numbers we can proudly say that all the preparations and hard work towards this event already paid off. Personally, I'm really grateful that we had this kind of response and the feedback from some attendees confirmed that the MSCC is on the right track here on Cyber Island Mauritius. Inspired and motivated by the success of this event, rest assured that there will be more public events like the GWAB. This time it took some time to reflect on our meetup, following my first impression right on spot: "Wow, what an experience to organise and participate in this global event. Overall, I've been very pleased with the preparations and the event itself. Surely, there have been some nicks that we have to address and to improve for future activities like this. Quite frankly, we are not professional event organisers (not yet) but we learned a lot over the past couple of days. A big Thank You to our event sponsors, namely Microsoft Indian Ocean Islands & French Pacific, Ceridian Mauritius and Emtel. Without them this event wouldn't have happened - Thank You! And to the cool team members of Microsoft Student Partners (MSPs). You geeks did a great job! Thanks!" So, how many attendees did we actually have? 61! - Awesome - 61 cloud computing instances to help on the research of diabetes. During Saturday afternoon there was even an online publication on L'Express: Les développeurs mauriciens se joignent au combat contre le diabète Reactions of other attendees Don't take my word for granted... Here are some impressions and feedback from our participants: "Awesome event, really appreciated the presentations :-)" -- Kevin on event comments "very interesting and enriching." -- Diana on event comments "#gwab #gwabmru 2014 great success. Looking forward for gwab 2015" -- Wasiim on Twitter "Was there till the end. Awesome Event. I'll surely join upcoming meetup sessions :)" -- Luchmun on event comments "#gwabmru was not that cool. left early" -- Mohammad on Twitter The overall feedback is positive but we are absolutely aware that there quite a number of problems we had to face. We are already looking into that and ideas / action plans on how we will be able to improve it for future events. The sessions We started the day with welcoming speeches by Thierry Coret, Sr. Marketing Manager of Microsoft Indian Ocean Islands & French Pacific and Vidia Mooneegan, Managing Director and Sr. Vice President of Ceridian Mauritius. The clear emphasis was on the endless possibilities of cloud computing and how it can enable any kind of sectors here in the country. Then it was about time to set up the cloud computing services in order to contribute each attendees cloud computing resources to the global research of diabetes, a step by step guide presented by Arnaud Meslier, Technical Evangelist at Microsoft. Given a rendering package and a configuration file it was very interesting to follow the single steps in Windows Azure. Also, during the day we were not sure whether the set up had been correctly, as Mauritius didn't show up on the results board - which should have been the case after approximately 20 to 30 minutes. Anyways, let the minions work... Next, Arnaud gave a brief overview of the variety of services Windows Azure has to offer. Whether you need a development environment for your websites or mobiles app, running a virtual machine with your existing applications or simply putting a SQL database online. No worries, Windows Azure has the right packages available and the online management portal is really easy t handle. After this, we got a little bit more business oriented while Wasiim Hosenbocus, employee at Ceridian, took the attendees through the inerts of a real-life application, and demoed a couple of the existing features. He did a great job by showing how the different services of Windows Azure can be created and pulled together. After the lunch break it is always tough to keep the audience awake... And it was my turn. I gave a brief overview on operating and managing a SQL database on Windows Azure. Well, there are actually two options available and depending on your individual requirements you should be aware of both. The simpler version is called SQL Database and while provisioning only takes a couple of seconds, you should take into consideration that SQL Database has a number of constraints, like limitations on the actual database size - up to 5 GB as web edition and up to 150 GB maximum as business edition -, among others. Next, it was Chervine Bhiwoo's session on Windows Azure Mobile Services. It was absolutely amazing to see that the mobiles services directly offers you various project templates, like Windows 8 Store App, Android app, iOS app, and even Xamarin cross-platform app development. So, within a couple of minutes you can have your first mobile app active and running on Windows Azure. Furthermore, Chervine showed the attendees that adding another user interface, like Web Sites running on ASP.NET MVC 4 only takes a couple of minutes, too. And last but not least, we rounded up the day with Windows Azure Websites and hosting of Virtual Machines presented by some members of the local Microsoft Students Partners programme. Surely, one of the big advantages using Windows Azure is the availability of pre-defined installation packages of known web applications, like WordPress, Joomla!, or Ghost. Compared to running your own web site with a traditional web hoster it is surely en par, and depending on your personal level of expertise, Windows Azure provides you more liberty in terms of configuration than maybe a shared hosting environment. Running a pre-defined web application is one thing but in case that you would like to have more control over your hosting environment it is highly advised to opt for a virtual machine. Provisioning of an Ubuntu 12.04 LTS system was very simple to do but it takes some more minutes than you might expect. So, please be patient and take your time while Windows Azure gets everything in place for you. Afterwards, you can use a SecureShell (ssh) client like Putty in case of a Linux-based machine, or Remote Desktop Services when operating a Windows Server system to log in into your virtual machine. At the end of the day we had a great Q&A session and we finalised the event with our raffle of goodies. Participation in the raffle was bound to submission of the session survey and most gratefully we had a give-away for everyone. What a nice coincidence to finish of the day. Note: All session slides (and demo codes) will be made available on the MSCC event page. Please, check the Files section over there. (Some) Visual impressions from the event Just to give you an idea about what has happened during the GWAB 2014 at Ebene... Speakers and Microsoft Student Partners are getting ready for the Global Windows Azure Bootcamp 2014 GWAB 2014 attendees are fully integrated into the hands-on-labs and setting up their individuals cloud computing services 60 attendees at the GWAB 2014. Despite some technical difficulties we had a great time running the event GWAB 2014: Using the lunch break for networking and exchange of ideas - Great conversations and topics amongst attendees There are more pictures on the original event page: Questions & Answers Following are a couple of questions which have been asked and didn't get an answer during the event: Q: Is it possible to upload static pages via FTP? A: Yes, you can. Have a look at the right side column on the dashboard of your website. There you'll find information about the FTP and SFTP host names. You can use any FTP client, like ie. FileZilla to log in. FTP also gives you access to your log files. Q: What are the size limitations on SQL Database? A: 5 GB on the Web Edition, and 150 GB on the business edition. A maximum 150 databases (inclusing 'master') per SQL Database server. More details here: General Guidelines and Limitations (Azure SQL Database) Q: What's the maximum size of a SQL Server running in a Virtual Machine? A: The maximum Windows Azure VM has currently 8 CPU cores, 14 or 56 GB of RAM and 16x 1 TB hard drives. More details here: Virtual Machine and Cloud Service Sizes for Azure Q: How can we register for Windows Azure? A: Mauritius is currently not listed for phone verification. Please get in touch with Arnaud Meslier at Microsoft IOI & FP Q: Can I use my own domain name for Windows Azure websites? A: Yes, you can. But this might require to upscale your account to Standard. In case that I missed a question and answer, please use the comment section at the end of the article. Thanks! Final results Every participant was instructed during the hands-on-lab session on how to set up a cloud computing service in their account. Of course, I won't keep the results from you... Global Azure Lab GWAB 2014: Our cloud computing contribution to the research of diabetes And I would say Mauritius did a good job! Upcoming Events What are the upcoming events here in Mauritius? So far, we have the following ones (incomplete list as usual) in chronological order: Launch of Microsoft SQL Server 2014 (15.4.2014) Corsair Hackers Reboot (19.4.2014) WebCup (TBA ~ June 2014) Developers Conference (TBA ~ July 2014) Linuxfest 2014 (TBA ~ November 2014) Hopefully, there will be more announcements during the next couple of weeks and months. If you know about any other event, like a bootcamp, a code challenge or hackathon here in Mauritius, please drop me a note in the comment section below this article. Thanks! Networking and job/project opportunities Despite having technical presentations on Windows Azure an event like this always offers a great bunch of possibilities and opportunities to get in touch with new people in IT, have an exchange of experience with other like-minded people. As I already wrote about Communities - The importance of exchange and discussion - I had a great conversation with representatives of the University des Mascareignes which are currently embracing cloud infrastructure and cloud computing for their various campuses in the Indian Ocean. As for the MSCC it would be a great experience to stay in touch with them, and to work on upcoming, common activities. Furthermore, I had a very good conversation with Thierry and Ludovic of Microsoft IOI & FP on the necessity of user groups and IT communities here on the island. It's great to see that the MSCC is currently on a run and that local companies are sharing our thoughts on promoting IT careers and exchange of IT knowledge in such an open way. I'm also looking forward to be able to participate and to contribute on more events in the near future. My resume of the day We learned a lot today and there is always room for improvement! It was an awesome event and quite frankly it was a pleasure to spend the day with so many enthuastic IT people in the same room. It was a great experience to organise such event locally and participate on a global scale to support the GlyQ-IQ Technology in their research on diabetes. I was so pleased to see the involvement of new MSCC members in taking the opportunity to share and learn about the power of cloud computing. The Mauritius Software Craftsmanship Community is on the right way and this year's bootcamp on Windows Azure only marked the beginning of our journey. Thank you to our sponsors and my kudos to the MSPs! Update: Media coverage The event has been reported in local media, too. Following are some resources: Orange - Local - Business: Le cloud, pour des recherches approfondies sur le diabète Maurice Info.mu: Le cloud, pour des recherches approfondies sur le diabète Le Quotidien Pg 2: Global Windows Azure Bootcamp 2014 - Le cloud pour des recherches approfondies sur le diabète The Observer Pg 12: Le cloud, pour des recherches approfondies sur le diabète

  Read the article

• http request to cgi python script successful, but the script doesn't seem to run

  - by chipChocolate.py

  I have configured cgi scripts for my apache2 web server. Here is what I want to do: Client uploads the image to the server. (this already works) On success, I want to execute the python script to resize the image. I tried the following and the success function does execute but my python script does not seem to execute: Javascript code that sends the request: var input = document.getElementById('imageLoader'); imageName = input.value; var file = input.files[0]; if(file != undefined){ formData= new FormData(); console.log(formData.length); if(!!file.type.match(/image.*/)){ formData.append("image", file); $.ajax({ url: "upload.php", type: "POST", processData: false, contentType: false, success: function() { var input = document.getElementById('imageLoader'); imageName = input.value; var file = input.files[0]; formData = new FormData(); formData.append("filename", file); $.ajax({ url: "http://localhost/Main/cgi-bin/resize.py", type: "POST", data: formData, processData: false, contentType: false, success: function(data) { console.log(data); } }); // code continues... resize.py: #!/usr/bin/python import cgi import cgitb import Image cgitb.enable() data = cgi.FieldStorage() filename = data.getvalue("filename") im = Image.open("../JS/upload/" + filename) (width, height) = im.size maxWidth = 600 maxHeight = 400 if width > maxWidth: d = float(width) / maxWidth height = int(height / d) width = maxWidth if height > maxHeight: d = float(height) / maxHeight width = int(width / d) height = maxHeight size = (width, height) im = im.resize(size, Image.ANTIALIAS) im.save("../JS/upload/" + filename, quality=100) This is the apache2.conf: <Directory /var/www/html/Main/cgi-bin> AllowOverride None Options +ExecCGI SetHandler cgi-script AddHandler cgi-script .py .cgi Order allow,deny Allow from all </Directory> cgi-bin and python script file permissions: drwxrwxr-x 2 mou mou 4096 Aug 24 03:28 cgi-bin -rwxrwxrwx 1 mou mou 1673 Aug 24 03:28 resize.py Edit: Executing this code $.ajax({ url: "http://localhost/Main/cgi-bin/resize.py", type: "POST", data: formData, // formData = {"filename" : "the filename which was saved in a variable whie the image was uploaded"} processData: false, contentType: false, success: function(data) { alert(data); } }); it alerts the following: <body bgcolor="#f0f0f8"><font color="#f0f0f8" size="-5"> --> <body bgcolor="#f0f0f8"><font color="#f0f0f8" size="-5"> --> --> </font> </font> </font> </script> </object> </blockquote> </pre> </table> </table> </table> </table> </table> </font> </font> </font><body bgcolor="#f0f0f8"> <table width="100%" cellspacing=0 cellpadding=2 border=0 summary="heading"> <tr bgcolor="#6622aa"> <td valign=bottom>&nbsp;<br> <font color="#ffffff" face="helvetica, arial">&nbsp;<br><big><big><strong>&lt;type 'exceptions.TypeError'&gt;</strong></big></big></font></td ><td align=right valign=bottom ><font color="#ffffff" face="helvetica, arial">Python 2.7.6: /usr/bin/python<br>Sun Aug 24 17:24:15 2014</font></td></tr></table> <p>A problem occurred in a Python script. Here is the sequence of function calls leading up to the error, in the order they occurred.</p> <table width="100%" cellspacing=0 cellpadding=0 border=0> <tr><td bgcolor="#d8bbff"><big>&nbsp;</big><a href="file:///var/www/html/Main/cgi-bin/resize.py">/var/www/html/Main/cgi-bin/resize.py</a> in <strong><module></strong>()</td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;&nbsp;&nbsp;10</small>&nbsp;<br> </tt></font></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;&nbsp;&nbsp;11</small>&nbsp;filename&nbsp;=&nbsp;data.getvalue("filename")<br> </tt></font></td></tr> <tr><td bgcolor="#ffccee"><tt>=&gt;<small>&nbsp;&nbsp;&nbsp;12</small>&nbsp;im&nbsp;=&nbsp;Image.open("../JS/upload/"&nbsp;+&nbsp;filename)<br> </tt></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;&nbsp;&nbsp;13</small>&nbsp;<br> </tt></font></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;&nbsp;&nbsp;14</small>&nbsp;(width,&nbsp;height)&nbsp;=&nbsp;im.size<br> </tt></font></td></tr> <tr><td><small><font color="#909090">im <em>undefined</em>, <strong>Image</strong>&nbsp;= &lt;module 'Image' from '/usr/lib/python2.7/dist-packages/PILcompat/Image.pyc'&gt;, Image.<strong>open</strong>&nbsp;= &lt;function open&gt;, <strong>filename</strong>&nbsp;= '<font color="#c040c0">\xff\xd8\xff\xe0\x00\x10</font>JFIF<font color="#c040c0">\x00\x01\x01\x00\x00\x01\x00\x01\x00\x00\xff\xdb\x00</font>C<font color="#c040c0">\x00\x06\x04\x05\x06\x05\x04\x06\x06\x05\x06\x07\x07\x06\x08\n\x10\n\n\t\t\n\x14\x0e</font>...<font color="#c040c0">\x94\r\x17\x11</font>b<font color="#c040c0">\xcd\xdc\x1a\xfe\xf1\x05\x1b\x15\xd1</font>R<font color="#c040c0">\xce\xe9</font>*<font color="#c040c0">\xb5\x8e</font>b<font color="#c040c0">\x97\x82\x87</font>R<font color="#c040c0">\xf4\xaa</font>K<font color="#c040c0">\x83</font>6<font color="#c040c0">\xbf\xfb</font>0<font color="#c040c0">\xa0\xb6</font>8<font color="#c040c0">\xa9</font>C<font color="#c040c0">\x86\x8d\x96</font>n+E<font color="#c040c0">\xd3\x7f\x99\xff\xd9</font>'</font></small></td></tr></table> <table width="100%" cellspacing=0 cellpadding=0 border=0> <tr><td bgcolor="#d8bbff"><big>&nbsp;</big><a href="file:///usr/lib/python2.7/dist-packages/PIL/Image.py">/usr/lib/python2.7/dist-packages/PIL/Image.py</a> in <strong>open</strong>(fp='../JS/upload/<font color="#c040c0">\xff\xd8\xff\xe0\x00\x10</font>JFIF<font color="#c040c0">\x00\x01\x01\x00\x00\x01\x00\x01\x00\x00\xff\xdb\x00</font>C<font color="#c040c0">\x00\x06\x04\x05\x06\x05\x04\x06\x06\x05\x06</font>...<font color="#c040c0">\x94\r\x17\x11</font>b<font color="#c040c0">\xcd\xdc\x1a\xfe\xf1\x05\x1b\x15\xd1</font>R<font color="#c040c0">\xce\xe9</font>*<font color="#c040c0">\xb5\x8e</font>b<font color="#c040c0">\x97\x82\x87</font>R<font color="#c040c0">\xf4\xaa</font>K<font color="#c040c0">\x83</font>6<font color="#c040c0">\xbf\xfb</font>0<font color="#c040c0">\xa0\xb6</font>8<font color="#c040c0">\xa9</font>C<font color="#c040c0">\x86\x8d\x96</font>n+E<font color="#c040c0">\xd3\x7f\x99\xff\xd9</font>', mode='r')</td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;1994</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;if&nbsp;isPath(fp):<br> </tt></font></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;1995</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;filename&nbsp;=&nbsp;fp<br> </tt></font></td></tr> <tr><td bgcolor="#ffccee"><tt>=&gt;<small>&nbsp;1996</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;fp&nbsp;=&nbsp;builtins.open(fp,&nbsp;"rb")<br> </tt></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;1997</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;else:<br> </tt></font></td></tr> <tr><td><font color="#909090"><tt>&nbsp;&nbsp;<small>&nbsp;1998</small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;filename&nbsp;=&nbsp;""<br> </tt></font></td></tr> <tr><td><small><font color="#909090"><strong>fp</strong>&nbsp;= '../JS/upload/<font color="#c040c0">\xff\xd8\xff\xe0\x00\x10</font>JFIF<font color="#c040c0">\x00\x01\x01\x00\x00\x01\x00\x01\x00\x00\xff\xdb\x00</font>C<font color="#c040c0">\x00\x06\x04\x05\x06\x05\x04\x06\x06\x05\x06</font>...<font color="#c040c0">\x94\r\x17\x11</font>b<font color="#c040c0">\xcd\xdc\x1a\xfe\xf1\x05\x1b\x15\xd1</font>R<font color="#c040c0">\xce\xe9</font>*<font color="#c040c0">\xb5\x8e</font>b<font color="#c040c0">\x97\x82\x87</font>R<font color="#c040c0">\xf4\xaa</font>K<font color="#c040c0">\x83</font>6<font color="#c040c0">\xbf\xfb</font>0<font color="#c040c0">\xa0\xb6</font>8<font color="#c040c0">\xa9</font>C<font color="#c040c0">\x86\x8d\x96</font>n+E<font color="#c040c0">\xd3\x7f\x99\xff\xd9</font>', <em>global</em> <strong>builtins</strong>&nbsp;= &lt;module '__builtin__' (built-in)&gt;, builtins.<strong>open</strong>&nbsp;= &lt;built-in function open&gt;</font></small></td></tr></table><p><strong>&lt;type 'exceptions.TypeError'&gt;</strong>: file() argument 1 must be encoded string without NULL bytes, not str <br><tt><small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</small>&nbsp;</tt>args&nbsp;= ('file() argument 1 must be encoded string without NULL bytes, not str',) <br><tt><small>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</small>&nbsp;</tt>message&nbsp;= 'file() argument 1 must be encoded string without NULL bytes, not str' <!-- The above is a description of an error in a Python program, formatted for a Web browser because the 'cgitb' module was enabled. In case you are not reading this in a Web browser, here is the original traceback: Traceback (most recent call last): File "/var/www/html/Main/cgi-bin/resize.py", line 12, in &lt;module&gt; im = Image.open("../JS/upload/" + filename) File "/usr/lib/python2.7/dist-packages/PIL/Image.py", line 1996, in open fp = builtins.open(fp, "rb") TypeError: file() argument 1 must be encoded string without NULL bytes, not str --> Does this mean that the formData I am sending over is empty?

  Read the article

• CodePlex Daily Summary for Thursday, January 13, 2011

  CodePlex Daily Summary for Thursday, January 13, 2011Popular ReleasesMVC Music Store: MVC Music Store v2.0: This is the 2.0 release of the MVC Music Store Tutorial. This tutorial is updated for ASP.NET MVC 3 and Entity Framework Code-First, and contains fixes and improvements based on feedback and common questions from previous releases. The main download, MvcMusicStore-v2.0.zip, contains everything you need to build the sample application, including A detailed tutorial document in PDF format Assets you will need to build the project, including images, a stylesheet, and a pre-populated databas...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.7 GA Released: Hi, Today we are releasing Visifire 3.6.7 GA with the following feature: * Inlines property has been implemented in Title. Also, this release contains fix for the following bugs: * In Column and Bar chart DataPoint’s label properties were not working as expected at real-time if marker enabled was set to true. * 3D Column and Bar chart were not rendered properly if AxisMinimum property was set in x-axis. You can download Visifire v3.6.7 here. Cheers, Team VisifireFluent Validation for .NET: 2.0: Changes since 2.0 RC Fix typo in the name of FallbackAwareResourceAccessorBuilder Fix issue #7062 - allow validator selectors to work against nullable properties with overriden names. Fix error in German localization. Better support for client-side validation messages in MVC integration. All changes since 1.3 Allow custom MVC ModelValidators to be added to the FVModelValidatorProvider Support resource provider for custom property validators through the new IResourceAccessorBuilder ...EnhSim: EnhSim 2.3.2 ALPHA: 2.3.1 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Quick update to ...ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: paging for the lookup lookup with multiselect changes: the css classes used by the framework where renamed to be more standard the lookup controller requries an item.ascx (no more ViewData["structure"]), and LookupList action renamed to Search all the...pwTools: pwTools: Changelog v1.0 base release??????????: All-In-One Code Framework ??? 2011-01-12: 2011???????All-In-One Code Framework（??） 2011?1??????！！http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?，???????ASP.NET, AJAX, WinForm, Windows Shell????13?Sample Code。???，??????????sample code。 ?????：http://blog.csdn.net/sjb5201/archive/2011/01/13/6135037.aspx ??，??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????，??Email ????patterns & practices – Enterprise Library: Enterprise Library 5.0 - Extensibility Labs: This is a preview release of the Hands-on Labs to help you learn and practice different ways the Enterprise Library can be extended. Learning MapCustom exception handler (estimated time to complete: 1 hr 15 mins) Custom logging trace listener (1 hr) Custom configuration source (registry-based) (30 mins) System requirementsEnterprise Library 5.0 / Unity 2.0 installed SQL Express 2008 installed Visual Studio 2010 Pro (or better) installed AuthorsChris Tavares, Microsoft Corporation ...Orchard Project: Orchard 1.0: Orchard Release Notes Build: 1.0.20 Published: 1/12/2010 How to Install OrchardTo install the Orchard tech preview using Web PI, follow these instructions: http://www.orchardproject.net/docs/Installing-Orchard.ashx Web PI will detect your hardware environment and install the application. --OR-- Alternatively, to install the release manually, download the Orchard.Web.1.0.20.zip file. The zip contents are pre-built and ready-to-run. Simply extract the contents of the Orchard folder from ...Umbraco CMS: Umbraco 4.6.1: The Umbraco 4.6.1 (codename JUNO) release contains many new features focusing on an improved installation experience, a number of robust developer features, and contains nearly 200 bug fixes since the 4.5.2 release. Getting Started A great place to start is with our Getting Started Guide: Getting Started Guide: http://umbraco.codeplex.com/Project/Download/FileDownload.aspx?DownloadId=197051 Make sure to check the free foundation videos on how to get started building Umbraco sites. They're ...Google URL Shortener API for .NET: Google URL Shortener API v1: According follow specification: http://code.google.com/apis/urlshortener/v1/reference.htmlStyleCop for ReSharper: StyleCop for ReSharper 5.1.14986.000: A considerable amount of work has gone into this release: Features: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new ObjectBasedEnvironment object does not resolve the StyleCop installation path, thus it does not return the ...SQL Monitor - tracking sql server activities: SQL Monitor 3.1 beta 1: 1. support alert message template 2. dynamic toolbar commands depending on functionality 3. fixed some bugs 4. refactored part of the code, now more stable and more clean upFacebook C# SDK: 4.2.1: - Authentication bug fixes - Updated Json.Net to version 4.0.0 - BREAKING CHANGE: Removed cookieSupport config setting, now automatic. This download is also availible on NuGet: Facebook FacebookWeb FacebookWebMvcHawkeye - The .Net Runtime Object Editor: Hawkeye 1.2.5: In the case you are running an x86 Windows and you installed Release 1.2.4, you should consider upgrading to this release (1.2.5) as it appears Hawkeye is broken on x86 OS. I apologize for the inconvenience, but it appears Hawkeye 1.2.4 (and probably previous versions) doesn't run on x86 Windows (See issue http://hawkeye.codeplex.com/workitem/7791). This maintenance release fixes this broken behavior. This release comes in two flavors: Hawkeye.125.N2 is the standard .NET 2 build, was compile...Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (January 2011): Another release build for daily use; it contains many new features, enhanced compatibility with latest PHP opensource applications and several issue fixes. To improve the performance of your application using MySQL, please use Managed MySQL Extension for Phalanger. Changes made within this release include following: New features available only in Phalanger. Full support of Multi-Script-Assemblies was implemented; you can build your application into several DLLs now. Deploy them separately t...AutoLoL: AutoLoL v1.5.3: A message will be displayed when there's an update available Shows a list of recent mastery files in the Editor Tab (requested by quite a few people) Updater: Update information is now scrollable Added a buton to launch AutoLoL after updating is finished Updated the UI to match that of AutoLoL Fix: Detects and resolves 'Read Only' state on Version.xmlTweetSharp: TweetSharp v2.0.0.0 - Preview 7: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 7 ChangesFixes the regression issue in OAuth from Preview 6 Preview 6 ChangesMaintenance release with user reported fixes Preview 5 ChangesMaintenance release with user reported fixes Third Party Library VersionsHammock v1.0.6: http://hammock.codeplex.com Json.NET 3.5 Release 8: http://json.codeplex.comExtended WPF Toolkit: Extended WPF Toolkit - 1.3.0: What's in the 1.3.0 Release?BusyIndicator ButtonSpinner ChildWindow ColorPicker - Updated (Breaking Changes) DateTimeUpDown - New Control Magnifier - New Control MaskedTextBox - New Control MessageBox NumericUpDown RichTextBox RichTextBoxFormatBar - Updated .NET 3.5 binaries and SourcePlease note: The Extended WPF Toolkit 3.5 is dependent on .NET Framework 3.5 and the WPFToolkit. You must install .NET Framework 3.5 and the WPFToolkit in order to use any features in the To...Ionics Isapi Rewrite Filter: 2.1 latest stable: V2.1 is stable, and is in maintenance mode. This is v2.1.1.25. It is a bug-fix release. There are no new features. 28629 29172 28722 27626 28074 29164 27659 27900 many documentation updates and fixes proper x64 build environment. This release includes x64 binaries in zip form, but no x64 MSI file. You'll have to manually install x64 servers, following the instructions in the documentation.New Projects4chan: Project for educational purposesAE.Net.Mail - POP/IMAP Client: C# POP/IMAP client libraryAlmathy: Application communautaire pour le partage de données basée sur le protocole XMPP. Discussion instantanée, mail, échange de données, travaux partagés. Développée en C#, utilisant les Windows Forms.AMK - Associação Metropolitana de Kendo: Projeto do site versão 2011 da Associação Metropolitana de Kendo. O site contará com: - Cadastro de atletas e eventos; - Controle de cadastro junto a CBK e histórico de graduações; - Calendário de treinos; Será desenvolvido usando .NET, MVC2, Entity Framework, SQL Server, JQueryAzke: New: Azke is a portal developed with ASP.NET MVC and MySQL. Old: Azke is a portal developed with ASP.net and MySQL.BuildScreen: A standalone Windows application to displays project build statuses from TeamCity. It can be used on a large screen for the whole development team to watch their build statuses as well as on a developer machine.CardOnline: CardOnline GameLobby GameCAudioEndpointVolume: The CAudioEndpointVolume implements the IAudioEndpointVolume Interface to control the master volume in Visual Basic 6.0 for Windows Vista and later operating systems.Cloudy - Online Storage Library: The goal of Cloudy is to be an online storage library to enable access for the most common storage services : DropBox, Skydrive, Google Docs, Azure Blob Storage and Amazon S3. It'll work in .NET 3.5 and up, Silverlight and Windows Phone 7 (WP7).ContentManager: Content Manger for SAP Kpro exports the data pool of a content-server by PHIOS-Lists (txt-files) into local binary files. Afterwards this files can be imported in a SAP content-repository . The whole List of the PHIOS Keys can also be downloaded an splitted in practical units.CSWFKrad: private FrameworkDiego: Diegodoomhjx_javalib: this is my lib for the java project.Eve Planetary Interaction: Eve Planetary InteractionEventWall: EventWall allows you to show related blogposts and tweets on the big screen. Just configure the hashtag and blog RSS feeds and you're done.Google URL Shortener API for .NET: Google URL Shortener API for .NET is a wrapper for the Google Project below: http://code.google.com/apis/urlshortener/v1/reference.html With Google URL Shortener API, you may shorten urls and get some analytics information about this. It's developer in C# 4.0 and VS2010. HtmlDeploy: A project to compile asp's Master page into pure html files. The idea is to use jQuery templating to do all the "if" and "for" when it comes to generating html output. Inventory Management System: Inventory Management System is a Silverlight-based system. It aims to manage and control the input raw material activites, output of finished goods of a small inventory.koplamp kapot: demo project voor AzureMSAccess SVN: Access SVN adds to Microsoft Access (MS Access) support for SVN Source controlMultiConvert: console based utility primary to convert solid edge files into data exchange formats like *.stp and *.dxf. It's using the API of the original software and can't be run alone. The goal of this project is creating routines with desired pre-instructions for batch conversionsNGN Image Getter: Nationalgeographic has really stunning photos! They allow to download them via website. This program automates that process.OOD CRM: Project CRM for Object Oriented Development final examsOpen NOS Client: Open NOS Rest ClientopenEHR.NET: openEHR.NET is a C# implementation of openEHR (http://openehr.org) Reference Model (RM) and Archetype Model (AM) specifications (Release 1.0.1). It allows you to build openEHR applications by composing RM objects, validate against AM objects and serialise to/from XML.OpenGL Flow Designer: OpenGL Flow Designer allows writing pseudo-C code to build OpenGL pipeline and preview results immediately.Orchard Translation Manager: An Orchard module that aims at facilitating the creation and management of translations of the Orchard CMS and its extensions.pwTools: A set of tools for viewing/editing some perfect world client/server filesServerStatusMobile: Server availability monitoring application for windows mobile 6.5.x running on WVGA (480x800) devices. Supports autorun, vibration & notification when server became unavailable, text log files for each server. .NET Compact Framework 3.5 required for running this applicationSimple Silverlight Multiple File Uploader: The project allows you to achieve multiple file uploading in Silverlight without complex, complicated, or third-party applications. In just two core classes, it's very simple to understand, use, and extend. Snos: Projet Snos linker Snes multi SupportT-4 Templates for ASP.NET Web Form Databound Control Friendly Logical Layers: This open source project includes a set of T-4 templates to enable you to build logical layers (i.e. DAL/BLL) with just few clicks! The logical layers implemented here are based on Entity Framework 4.0, ASP.NET Web Form Data Bound control friendly and fully unit testable.The Media Store: The Media StoreUM: source control for the um projecturBook - Your Address Book Manager: urBook is and Address Book Manager that can merge all your contacts on all web services you use with your phone contacts to have one consistent Address Book for all your contacts and to update back your web services contacts with the one consistent address bookWindows Phone Certificate Installer: Helps install Trusted Root Certificates on Windows Phone 7 to enable SSL requests. Intended to allow developers to use localhost web servers during development without requiring the purchase of an SSL certificate. Especially helpful for ws-trust secured web service development.

  Read the article

• Virtual host is not working in Ubuntu 14 VPS using XAMPP 1.8.3

  - by viral4ever

  I am using XAMPP as server in ubuntu 14.04 VPS of digitalocean. I tried to setup virtual hosts. But it is not working and I am getting 403 error of access denied. I changed files too. My files with changes are /opt/lampp/etc/httpd.conf # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/trunk/> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/trunk/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so 'log/access_log' # with ServerRoot set to '/www' will be interpreted by the # server as '/www/log/access_log', where as '/log/access_log' will be # interpreted as '/log/access_log'. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to specify a local disk on the # Mutex directive, if file-based mutexes are used. If you wish to share the # same ServerRoot for multiple httpd daemons, you will need to change at # least PidFile. # ServerRoot "/opt/lampp" # # Mutex: Allows you to set the mutex mechanism and mutex file directory # for individual mutexes, or change the global defaults # # Uncomment and change the directory if mutexes are file-based and the default # mutex file directory is not on a local disk or is not appropriate for some # other reason. # # Mutex default:logs # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbd_module modules/mod_authn_dbd.so LoadModule authn_socache_module modules/mod_authn_socache.so LoadModule authn_core_module modules/mod_authn_core.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_dbd_module modules/mod_authz_dbd.so LoadModule authz_core_module modules/mod_authz_core.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule access_compat_module modules/mod_access_compat.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_form_module modules/mod_auth_form.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule allowmethods_module modules/mod_allowmethods.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule cache_module modules/mod_cache.so LoadModule cache_disk_module modules/mod_cache_disk.so LoadModule socache_shmcb_module modules/mod_socache_shmcb.so LoadModule socache_dbm_module modules/mod_socache_dbm.so LoadModule socache_memcache_module modules/mod_socache_memcache.so LoadModule dbd_module modules/mod_dbd.so LoadModule bucketeer_module modules/mod_bucketeer.so LoadModule dumpio_module modules/mod_dumpio.so LoadModule echo_module modules/mod_echo.so LoadModule case_filter_module modules/mod_case_filter.so LoadModule case_filter_in_module modules/mod_case_filter_in.so LoadModule buffer_module modules/mod_buffer.so LoadModule ratelimit_module modules/mod_ratelimit.so LoadModule reqtimeout_module modules/mod_reqtimeout.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule request_module modules/mod_request.so LoadModule include_module modules/mod_include.so LoadModule filter_module modules/mod_filter.so LoadModule substitute_module modules/mod_substitute.so LoadModule sed_module modules/mod_sed.so LoadModule charset_lite_module modules/mod_charset_lite.so LoadModule deflate_module modules/mod_deflate.so LoadModule mime_module modules/mod_mime.so LoadModule ldap_module modules/mod_ldap.so LoadModule log_config_module modules/mod_log_config.so LoadModule log_debug_module modules/mod_log_debug.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule expires_module modules/mod_expires.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule unique_id_module modules/mod_unique_id.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule version_module modules/mod_version.so LoadModule remoteip_module modules/mod_remoteip.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so LoadModule proxy_scgi_module modules/mod_proxy_scgi.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_express_module modules/mod_proxy_express.so LoadModule session_module modules/mod_session.so LoadModule session_cookie_module modules/mod_session_cookie.so LoadModule session_dbd_module modules/mod_session_dbd.so LoadModule slotmem_shm_module modules/mod_slotmem_shm.so LoadModule ssl_module modules/mod_ssl.so LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so LoadModule unixd_module modules/mod_unixd.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule suexec_module modules/mod_suexec.so LoadModule cgi_module modules/mod_cgi.so LoadModule cgid_module modules/mod_cgid.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so <IfDefine JUSTTOMAKEAPXSHAPPY> LoadModule php4_module modules/libphp4.so LoadModule php5_module modules/libphp5.so </IfDefine> <IfModule unixd_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User root Group www </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin [email protected] # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName www.example.com:@@Port@@ # XAMPP ServerName localhost # # Deny access to the entirety of your server's filesystem. You must # explicitly permit access to web content directories in other # <Directory> blocks below. # <Directory /> AllowOverride none Require all denied </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/opt/lampp/htdocs" <Directory "/opt/lampp/htdocs"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/trunk/mod/core.html#options # for more information. # #Options Indexes FollowSymLinks # XAMPP Options Indexes FollowSymLinks ExecCGI Includes # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # #AllowOverride None # since XAMPP 1.4: AllowOverride All # # Controls who can get stuff from this server. # Require all granted </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> #DirectoryIndex index.html # XAMPP DirectoryIndex index.html index.html.var index.php index.php3 index.php4 </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ".ht*"> Require all denied </Files> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "logs/error_log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "logs/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access_log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/opt/lampp/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "/opt/lampp/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/opt/lampp/cgi-bin"> AllowOverride None Options None Require all granted </Directory> <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig etc/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # XAMPP, since LAMPP 0.9.8: AddHandler cgi-script .cgi .pl # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # # XAMPP AddType text/html .shtml AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile etc/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or one of the special # values 'default', 'none' or 'unlimited'. # Default setting is to accept 200 Ranges. #MaxRanges unlimited # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall may be used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # Defaults: EnableMMAP On, EnableSendfile Off # EnableMMAP off EnableSendfile off # Supplemental configuration # # The configuration files in the etc/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include etc/extra/httpd-mpm.conf # Multi-language error messages Include etc/extra/httpd-multilang-errordoc.conf # Fancy directory listings Include etc/extra/httpd-autoindex.conf # Language settings #Include etc/extra/httpd-languages.conf # User home directories #Include etc/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include etc/extra/httpd-info.conf # Virtual hosts Include etc/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include etc/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include etc/extra/httpd-dav.conf # Various default settings Include etc/extra/httpd-default.conf # Configure mod_proxy_html to understand HTML4/XHTML1 <IfModule proxy_html_module> Include etc/extra/proxy-html.conf </IfModule> # Secure (SSL/TLS) connections <IfModule ssl_module> # XAMPP <IfDefine SSL> Include etc/extra/httpd-ssl.conf </IfDefine> </IfModule> # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> # XAMPP Include etc/extra/httpd-xampp.conf Include "/opt/lampp/apache2/conf/httpd.conf" I used command shown in this example. I used below lines to change and add group Add group "groupadd www" Add user to group "usermod -aG www root" Change htdocs group "chgrp -R www /opt/lampp/htdocs" Change sitedir group "chgrp -R www /opt/lampp/htdocs/mysite" Change htdocs chmod "chmod 2775 /opt/lampp/htdocs" Change sitedir chmod "chmod 2775 /opt/lampp/htdocs/mysite" And then I changed my vhosts.conf file # Virtual Hosts # # Required modules: mod_log_config # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the server doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.4/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to verify your virtual host # configuration. # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServerName or ServerAlias in any <VirtualHost> block. # <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/opt/lampp/docs/dummy-host.example.com" ServerName dummy-host.example.com ServerAlias www.dummy-host.example.com ErrorLog "logs/dummy-host.example.com-error_log" CustomLog "logs/dummy-host.example.com-access_log" common </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/opt/lampp/docs/dummy-host2.example.com" ServerName dummy-host2.example.com ErrorLog "logs/dummy-host2.example.com-error_log" CustomLog "logs/dummy-host2.example.com-access_log" common </VirtualHost> NameVirtualHost * <VirtualHost *> ServerAdmin [email protected] DocumentRoot "/opt/lampp/htdocs/mysite" ServerName mysite.com ServerAlias mysite.com ErrorLog "/opt/lampp/htdocs/mysite/errorlogs" CustomLog "/opt/lampp/htdocs/mysite/customlog" common <Directory "/opt/lampp/htdocs/mysite"> Options Indexes FollowSymLinks Includes ExecCGI AllowOverride All Order Allow,Deny Allow from all Require all granted </Directory> </VirtualHost> but still its not working and I am getting 403 error on my ip and domain however I can access phpmyadmin. If anyone can help me, please help me.

  Read the article

• More Animation - Self Dismissing Dialogs

  - by Duncan Mills

  In my earlier articles on animation, I discussed various slide, grow and  flip transitions for items and containers.  In this article I want to discuss a fade animation and specifically the use of fades and auto-dismissal for informational dialogs.  If you use a Mac, you may be familiar with Growl as a notification system, and the nice way that messages that are informational just fade out after a few seconds. So in this blog entry I wanted to discuss how we could make an ADF popup behave in the same way. This can be an effective way of communicating information to the user without "getting in the way" with modal alerts. This of course, has been done before, but everything I've seen previously requires something like JQuery to be in the mix when we don't really need it to be.  The solution I've put together is nice and generic and will work with either <af:panelWindow> or <af:dialog> as a the child of the popup. In terms of usage it's pretty simple to use we  just need to ensure that the popup itself has clientComponent is set to true and includes the animation JavaScript (animateFadingPopup) on a popupOpened event: <af:popup id="pop1" clientComponent="true">   <af:panelWindow title="A Fading Message...">    ...  </af:panelWindow>   <af:clientListener method="animateFadingPopup" type="popupOpened"/> </af:popup>   The popup can be invoked in the normal way using showPopupBehavior or JavaScript, no special code is required there. As a further twist you can include an additional clientAttribute called preFadeDelay to define a delay before the fade itself starts (the default is 5 seconds) . To set the delay to just 2 seconds for example: <af:popup ...>   ...   <af:clientAttribute name="preFadeDelay" value="2"/>   <af:clientListener method="animateFadingPopup" type="popupOpened"/>  </af:popup> The Animation Styles  As before, we have a couple of CSS Styles which define the animation, I've put these into the skin in my case, and, as in the other articles, I've only defined the transitions for WebKit browsers (Chrome, Safari) at the moment. In this case, the fade is timed at 5 seconds in duration. .popupFadeReset {   opacity: 1; } .popupFadeAnimate {   opacity: 0;   -webkit-transition: opacity 5s ease-in-out; } As you can see here, we are achieving the fade by simply setting the CSS opacity property. The JavaScript The final part of the puzzle is, of course, the JavaScript, there are four functions, these are generic (apart from the Style names which, if you've changed above, you'll need to reflect here): The initial function invoked from the popupOpened event,  animateFadingPopup which starts a timer and provides the initial delay before we start to fade the popup. The function that applies the fade animation to the popup - initiatePopupFade. The callback function - closeFadedPopup used to reset the style class and correctly hide the popup so that it can be invoked again and again.   A utility function - findFadeContainer, which is responsible for locating the correct child component of the popup to actually apply the style to. Function - animateFadingPopup This function, as stated is the one hooked up to the popupOpened event via a clientListener. Because of when the code is called it does not actually matter how you launch the popup, or if the popup is re-used from multiple places. All usages will get the fade behavior. /**  * Client listener which will kick off the animation to fade the dialog and register  * a callback to correctly reset the popup once the animation is complete  * @param event  */ function animateFadingPopup(event) { var fadePopup = event.getSource();   var fadeCandidate = false;   //Ensure that the popup is initially Opaque   //This handles the situation where the user has dismissed   //the popup whilst it was in the process of fading   var fadeContainer = findFadeContainer(fadePopup);   if (fadeContainer != null) {     fadeCandidate = true;     fadeContainer.setStyleClass("popupFadeReset");   }   //Only continue if we can actually fade this popup   if (fadeCandidate) {   //See if a delay has been specified     var waitTimeSeconds = event.getSource().getProperty('preFadeDelay');     //Default to 5 seconds if not supplied     if (waitTimeSeconds == undefined) {     waitTimeSeconds = 5;     }     // Now call the fade after the specified time     var fadeFunction = function () {     initiatePopupFade(fadePopup);     };     var fadeDelayTimer = setTimeout(fadeFunction, (waitTimeSeconds * 1000));   } } The things to note about this function is the initial check that we have to do to ensure that the container is currently visible and reset it's style to ensure that it is.  This is to handle the situation where the popup has begun the fade, and yet the user has still explicitly dismissed the popup before it's complete and in doing so has prevented the callback function (described later) from executing. In this particular situation the initial display of the dialog will be (apparently) missing it's normal animation but at least it becomes visible to the user (and most users will probably not notice this difference in any case). You'll notice that the style that we apply to reset the  opacity - popupFadeReset, is not applied to the popup component itself but rather the dialog or panelWindow within it. More about that in the description of the next function findFadeContainer(). Finally, assuming that we have a suitable candidate for fading, a JavaScript  timer is started using the specified preFadeDelay wait time (or 5 seconds if that was not supplied). When this timer expires then the main animation styleclass will be applied using the initiatePopupFade() function Function - findFadeContainer As a component, the <af:popup> does not support styleClass attribute, so we can't apply the animation style directly.  Instead we have to look for the container within the popup which defines the window object that can have a style attached.  This is achieved by the following code: /**  * The thing we actually fade will be the only child  * of the popup assuming that this is a dialog or window  * @param popup  * @return the component, or null if this is not valid for fading  */ function findFadeContainer(popup) { var children = popup.getDescendantComponents();   var fadeContainer = children[0];   if (fadeContainer != undefined) {   var compType = fadeContainer.getComponentType();     if (compType == "oracle.adf.RichPanelWindow" || compType == "oracle.adf.RichDialog") {     return fadeContainer;     }   }   return null; }  So what we do here is to grab the first child component of the popup and check its type. Here I decided to limit the fade behaviour to only <af:dialog> and <af:panelWindow>. This was deliberate.  If  we apply the fade to say an <af:noteWindow> you would see the text inside the balloon fade, but the balloon itself would hang around until the fade animation was over and then hide.  It would of course be possible to make the code smarter to walk up the DOM tree to find the correct <div> to apply the style to in order to hide the whole balloon, however, that means that this JavaScript would then need to have knowledge of the generated DOM structure, something which may change from release to release, and certainly something to avoid. So, all in all, I think that this is an OK restriction and frankly it's windows and dialogs that I wanted to fade anyway, not balloons and menus. You could of course extend this technique and handle the other types should you really want to. One thing to note here is the selection of the first (children[0]) child of the popup. It does not matter if there are non-visible children such as clientListener before the <af:dialog> or <af:panelWindow> within the popup, they are not included in this array, so picking the first element in this way seems to be fine, no matter what the underlying ordering is within the JSF source.  If you wanted a super-robust version of the code you might want to iterate through the children array of the popup to check for the right type, again it's up to you.  Function -  initiatePopupFade  On to the actual fading. This is actually very simple and at it's heart, just the application of the popupFadeAnimate style to the correct component and then registering a callback to execute once the fade is done. /**  * Function which will kick off the animation to fade the dialog and register  * a callback to correctly reset the popup once the animation is complete  * @param popup the popup we are animating  */ function initiatePopupFade(popup) { //Only continue if the popup has not already been dismissed    if (popup.isPopupVisible()) {   //The skin styles that define the animation      var fadeoutAnimationStyle = "popupFadeAnimate";     var fadeAnimationResetStyle = "popupFadeReset";     var fadeContainer = findFadeContainer(popup);     if (fadeContainer != null) {     var fadeContainerReal = AdfAgent.AGENT.getElementById(fadeContainer.getClientId());       //Define the callback this will correctly reset the popup once it's disappeared       var fadeCallbackFunction = function (event) {       closeFadedPopup(popup, fadeContainer, fadeAnimationResetStyle);         event.target.removeEventListener("webkitTransitionEnd", fadeCallbackFunction);       };       //Initiate the fade       fadeContainer.setStyleClass(fadeoutAnimationStyle);       //Register the callback to execute once fade is done       fadeContainerReal.addEventListener("webkitTransitionEnd", fadeCallbackFunction, false);     }   } } I've added some extra checks here though. First of all we only start the whole process if the popup is still visible. It may be that the user has closed the popup before the delay timer has finished so there is no need to start animating in that case. Again we use the findFadeContainer() function to locate the correct component to apply the style to, and additionally we grab the DOM id that represents that container.  This physical ID is required for the registration of the callback function. The closeFadedPopup() call is then registered on the callback so as to correctly close the now transparent (but still there) popup. Function -  closeFadedPopup The final function just cleans things up: /**  * Callback function to correctly cancel and reset the style in the popup  * @param popup id of the popup so we can close it properly  * @param contatiner the window / dialog within the popup to actually style  * @param resetStyle the syle that sets the opacity back to solid  */ function closeFadedPopup(popup, container, resetStyle) { container.setStyleClass(resetStyle);   popup.cancel(); }  First of all we reset the style to make the popup contents opaque again and then we cancel the popup.  This will ensure that any of your user code that is waiting for a popup cancelled event will actually get the event, additionally if you have done this as a modal window / dialog it will ensure that the glasspane is dismissed and you can interact with the UI again.  What's Next? There are several ways in which this technique could be used, I've been working on a popup here, but you could apply the same approach to in-line messages. As this code (in the popup case) is generic it will make s pretty nice declarative component and maybe, if I get time, I'll look at constructing a formal Growl component using a combination of this technique, and active data push. Also, I'm sure the above code can be improved a little too.  Specifically things like registering a popup cancelled listener to handle the style reset so that we don't loose the subtle animation that takes place when the popup is opened in that situation where the user has closed the in-fade dialog.

  Read the article

• How to create a new WCF/MVC/jQuery application from scratch

  - by pjohnson

  As a corporate developer by trade, I don't get much opportunity to create from-the-ground-up web sites; usually it's tweaks, fixes, and new functionality to existing sites. And with hobby sites, I often don't find the challenges I run into with enterprise systems; usually it's starting from Visual Studio's boilerplate project and adding whatever functionality I want to play around with, rarely deploying outside my own machine. So my experience creating a new enterprise-level site was a bit dated, and the technologies to do so have come a long way, and are much more ready to go out of the box. My intention with this post isn't so much to provide any groundbreaking insights, but to just tie together a lot of information in one place to make it easy to create a new site from scratch. Architecture One site I created earlier this year had an MVC 3 front end and a WCF 4-driven service layer. Using Visual Studio 2010, these project types are easy enough to add to a new solution. I created a third Class Library project to store common functionality the front end and services layers both needed to access, for example, the DataContract classes that the front end uses to call services in the service layer. By keeping DataContract classes in a separate project, I avoided the need for the front end to have an assembly/project reference directly to the services code, a bit cleaner and more flexible of an SOA implementation. Consuming the service Even by this point, VS has given you a lot. You have a working web site and a working service, neither of which do much but are great starting points. To wire up the front end and the services, I needed to create proxy classes and WCF client configuration information. I decided to use the SvcUtil.exe utility provided as part of the Windows SDK, which you should have installed if you installed VS. VS also provides an Add Service Reference command since the .NET 1.x ASMX days, which I've never really liked; it creates several .cs/.disco/etc. files, some of which contained hardcoded URL's, adding duplicate files (*1.cs, *2.cs, etc.) without doing a good job of cleaning up after itself. I've found SvcUtil much cleaner, as it outputs one C# file (containing several proxy classes) and a config file with settings, and it's easier to use to regenerate the proxy classes when the service changes, and to then maintain all your configuration in one place (your Web.config, instead of the Service Reference files). I provided it a reference to a copy of my common assembly so it doesn't try to recreate the data contract classes, had it use the type List<T> for collections, and modified the output files' names and .NET namespace, ending up with a command like: svcutil.exe /l:cs /o:MyService.cs /config:MyService.config /r:MySite.Common.dll /ct:System.Collections.Generic.List`1 /n:*,MySite.Web.ServiceProxies http://localhost:59999/MyService.svc I took the generated MyService.cs file and drop it in the web project, under a ServiceProxies folder, matching the namespace and keeping it separate from classes I coded manually. Integrating the config file took a little more work, but only needed to be done once as these settings didn't often change. A great thing Microsoft improved with WCF 4 is configuration; namely, you can use all the default settings and not have to specify them explicitly in your config file. Unfortunately, SvcUtil doesn't generate its config file this way. If you just copy & paste MyService.config's contents into your front end's Web.config, you'll copy a lot of settings you don't need, plus this will get unwieldy if you add more services in the future, each with its own custom binding. Really, as the only mandatory settings are the endpoint's ABC's (address, binding, and contract) you can get away with just this: <system.serviceModel>  <client>    <endpoint address="http://localhost:59999/MyService.svc" binding="wsHttpBinding" contract="MySite.Web.ServiceProxies.IMyService" />  </client></system.serviceModel> By default, the services project uses basicHttpBinding. As you can see, I switched it to wsHttpBinding, a more modern standard. Using something like netTcpBinding would probably be faster and more efficient since the client & service are both written in .NET, but it requires additional server setup and open ports, whereas switching to wsHttpBinding is much simpler. From an MVC controller action method, I instantiated the client, and invoked the method for my operation. As with any object that implements IDisposable, I wrapped it in C#'s using() statement, a tidy construct that ensures Dispose gets called no matter what, even if an exception occurs. Unfortunately there are problems with that, as WCF's ClientBase<TChannel> class doesn't implement Dispose according to Microsoft's own usage guidelines. I took an approach similar to Technology Toolbox's fix, except using partial classes instead of a wrapper class to extend the SvcUtil-generated proxy, making the fix more seamless from the controller's perspective, and theoretically, less code I have to change if and when Microsoft fixes this behavior. User interface The MVC 3 project template includes jQuery and some other common JavaScript libraries by default. I updated the ones I used to the latest versions using NuGet, available in VS via the Tools > Library Package Manager > Manage NuGet Packages for Solution... > Updates. I also used this dialog to remove packages I wasn't using. Given that it's smart enough to know the difference between the .js and .min.js files, I was hoping it would be smart enough to know which to include during build and publish operations, but this doesn't seem to be the case. I ended up using Cassette to perform the minification and bundling of my JavaScript and CSS files; ASP.NET 4.5 includes this functionality out of the box. The web client to web server link via jQuery was easy enough. In my JavaScript function, unobtrusively wired up to a button's click event, I called $.ajax, corresponding to an action method that returns a JsonResult, accomplished by passing my model class to the Controller.Json() method, which jQuery helpfully translates from JSON to a JavaScript object.$.ajax calls weren't perfectly straightforward. I tried using the simpler $.post method instead, but ran into trouble without specifying the contentType parameter, which $.post doesn't have. The url parameter is simple enough, though for flexibility in how the site is deployed, I used MVC's Url.Action method to get the URL, then sent this to JavaScript in a JavaScript string variable. If the request needed input data, I used the JSON.stringify function to convert a JavaScript object with the parameters into a JSON string, which MVC then parses into strongly-typed C# parameters. I also specified "json" for dataType, and "application/json; charset=utf-8" for contentType. For success and error, I provided my success and error handling functions, though success is a bit hairier. "Success" in this context indicates whether the HTTP request succeeds, not whether what you wanted the AJAX call to do on the web server was successful. For example, if you make an AJAX call to retrieve a piece of data, the success handler will be invoked for any 200 OK response, and the error handler will be invoked for failed requests, e.g. a 404 Not Found (if the server rejected the URL you provided in the url parameter) or 500 Internal Server Error (e.g. if your C# code threw an exception that wasn't caught). If an exception was caught and handled, or if the data requested wasn't found, this would likely go through the success handler, which would need to do further examination to verify it did in fact get back the data for which it asked. I discuss this more in the next section. Logging and exception handling At this point, I had a working application. If I ran into any errors or unexpected behavior, debugging was easy enough, but of course that's not an option on public web servers. Microsoft Enterprise Library 5.0 filled this gap nicely, with its Logging and Exception Handling functionality. First I installed Enterprise Library; NuGet as outlined above is probably the best way to do so. I needed a total of three assembly references--Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging, and Microsoft.Practices.EnterpriseLibrary.Logging. VS links with the handy Enterprise Library 5.0 Configuration Console, accessible by right-clicking your Web.config and choosing Edit Enterprise Library V5 Configuration. In this console, under Logging Settings, I set up a Rolling Flat File Trace Listener to write to log files but not let them get too large, using a Text Formatter with a simpler template than that provided by default. Logging to a different (or additional) destination is easy enough, but a flat file suited my needs. At this point, I verified it wrote as expected by calling the Microsoft.Practices.EnterpriseLibrary.Logging.Logger.Write method from my C# code. With those settings verified, I went on to wire up Exception Handling with Logging. Back in the EntLib Configuration Console, under Exception Handling, I used a LoggingExceptionHandler, setting its Logging Category to the category I already had configured in the Logging Settings. Then, from code (e.g. a controller's OnException method, or any action method's catch block), I called the Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.ExceptionPolicy.HandleException method, providing the exception and the exception policy name I had configured in the Exception Handling Settings. Before I got this configured correctly, when I tried it out, nothing was logged. In working with .NET, I'm used to seeing an exception if something doesn't work or isn't set up correctly, but instead working with these EntLib modules reminds me more of JavaScript (before the "use strict" v5 days)--it just does nothing and leaves you to figure out why, I presume due in part to the listener pattern Microsoft followed with the Enterprise Library. First, I verified logging worked on its own. Then, verifying/correcting where each piece wires up to the next resolved my problem. Your C# code calls into the Exception Handling module, referencing the policy you pass the HandleException method; that policy's configuration contains a LoggingExceptionHandler that references a logCategory; that logCategory should be added in the loggingConfiguration's categorySources section; that category references a listener; that listener should be added in the loggingConfiguration's listeners section, which specifies the name of the log file. One final note on error handling, as the proper way to handle WCF and MVC errors is a whole other very lengthy discussion. For AJAX calls to MVC action methods, depending on your configuration, an exception thrown here will result in ASP.NET'S Yellow Screen Of Death being sent back as a response, which is at best unnecessarily and uselessly verbose, and at worst a security risk as the internals of your application are exposed to potential hackers. I mitigated this by overriding my controller's OnException method, passing the exception off to the Exception Handling module as above. I created an ErrorModel class with as few properties as possible (e.g. an Error string), sending as little information to the client as possible, to both maximize bandwidth and mitigate risk. I then return an ErrorModel in JSON format for AJAX requests: if (filterContext.HttpContext.Request.IsAjaxRequest()){    filterContext.Result = Json(new ErrorModel(...));    filterContext.ExceptionHandled = true;} My $.ajax calls from the browser get a valid 200 OK response and go into the success handler. Before assuming everything is OK, I check if it's an ErrorModel or a model containing what I requested. If it's an ErrorModel, or null, I pass it to my error handler. If the client needs to handle different errors differently, ErrorModel can contain a flag, error code, string, etc. to differentiate, but again, sending as little information back as possible is ideal. Summary As any experienced ASP.NET developer knows, this is a far cry from where ASP.NET started when I began working with it 11 years ago. WCF services are far more powerful than ASMX ones, MVC is in many ways cleaner and certainly more unit test-friendly than Web Forms (if you don't consider the code/markup commingling you're doing again), the Enterprise Library makes error handling and logging almost entirely configuration-driven, AJAX makes a responsive UI more feasible, and jQuery makes JavaScript coding much less painful. It doesn't take much work to get a functional, maintainable, flexible application, though having it actually do something useful is a whole other matter.

  Read the article

• CodePlex Daily Summary for Tuesday, February 01, 2011

  CodePlex Daily Summary for Tuesday, February 01, 2011Popular ReleasesWatchersNET CKEditor™ Provider for DotNetNuke®: CKEditor Provider 1.12.07: Whats New Added CKEditor 3.5.1 (Rev. 6398) - Whats New File Browser now List all Anchor on selected Dnn Page (Tab) changes File Browser now uses DNN Cache instead of HTTP Session for Authorization Using now Google Hosted CDN Versions of jQuery and jQuery-UI Scripts (Auto detects if needed http or https)Chemistry Add-in for Word: Chemistry Add-in for Word - Version 1.0: On February 1, 2011, we announced the availability of version 1 of the Chemistry Add-in for Word, as well as the assignment of the open source project to the Outercurve Foundation by Microsoft Research and the University of Cambridge. System RequirementsHardware RequirementsAny computer that can run Office 2007 or Office 2010. Software RequirementsYour computer must have the following software: Any version of Windows that can run Office 2007 or Office 2010, which includes Windows XP SP3 and...StyleCop for ReSharper: StyleCop for ReSharper 5.1.15005.000: Applied patch from rodpl for merging of stylecop setting files with settings in parent folder. Previous release: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new Objec...Minecraft Tools: Minecraft Topographical Survey 1.4: MTS requires version 4 of the .NET Framework - you must download it from Microsoft if you have not previously installed it. This version of MTS adds MCRegion support and fixes bugs that caused rendering to fail for some users. New in this version of MTS: Support for rendering worlds compressed with MCRegion Fixed rendering failure when encountering non-NBT files with the .dat extension Fixed rendering failure when encountering corrupt NBT files Minor GUI updates Note that the command...MVC Controls Toolkit: Mvc Controls Toolkit 0.8: Fixed the following bugs: *Variable name error in the jvascript file that prevented the use of the deleted item template of the Datagrid *Now after the changes applied to an item of the DataGrid are cancelled all input fields are reset to the very initial value they had. *Other minor bugs. Added: *This version is available both for MVC2, and MVC 3. The MVC 3 version has a release number of 0.85. This way one can install both version. *Client Validation support has been added to all control...Office Web.UI: Beta preview (Source): This is the first Beta. it includes full source code and all available controls. Some designers are not ready, and some features are not finalized allready (missing properties, draft styles) ThanksASP.net Ribbon: Version 2.2: This release brings some new controls (part of Office Web.UI). A few bugs are fixed and it includes the "auto resize" feature as you resize the window. (It can cause an infinite loop when the window is too reduced, it's why this release is not marked as "stable"). I will release more versions 2.3, 2.4... until V3 which will be the official launch of Office Web.UI. Both products will evolve at the same speed. Thanks.Barcode Rendering Framework: 2.1.1.0: Final release for VS2008 Finally fixed bugs with code 128 symbology.xUnit.net - Unit Testing for .NET: xUnit.net 1.7: xUnit.net release 1.7Build #1540 Important notes for Resharper users: Resharper support has been moved to the xUnit.net Contrib project. Important note for TestDriven.net users: If you are having issues running xUnit.net tests in TestDriven.net, especially on 64-bit Windows, we strongly recommend you upgrade to TD.NET version 3.0 or later. This release adds the following new features: Added support for ASP.NET MVC 3 Added Assert.Equal(double expected, double actual, int precision) Ad...DoddleReport - Automatic HTML/Excel/PDF Reporting: DoddleReport 1.0: DoddleReport will add automatic tabular-based reporting (HTML/PDF/Excel/etc) for any LINQ Query, IEnumerable, DataTable or SharePoint List For SharePoint integration please click Here PDF Reporting has been placed into a separate assembly because it requies AbcPdf http://www.websupergoo.com/download.htmSpark View Engine: Spark v1.5: Release Notes There have been a lot of minor changes going on since version 1.1, but most important to note are the major changes which include: Support for HTML5 "section" tag. Spark has now renamed its own section tag to "segment" instead to avoid clashes. You can still use "section" in a Spark sense for legacy support by specifying ParseSectionAsSegment = true if needed while you transition Bindings - this is a massive feature that further simplifies your views by giving you a powerful ...Marr DataMapper: Marr DataMapper 1.0.0 beta: First release.WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.3: Version: 2.0.0.3 (Milestone 3): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...Rawr: Rawr 4.0.17 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 and on the Version Notes page: http://rawr.codeplex.com/wikipage?title=VersionNotes As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you...Squiggle - A Free open source LAN Messenger: Squiggle 2.5 Beta: In this release following are the new features: Localization: Support for Arabic, French, German and Chinese (Simplified) Bridge: Connect two Squiggle nets across the WAN or different subnets Aliases: Special codes with special meaning can be embedded in message like (version),(datetime),(time),(date),(you),(me) Commands: cls, /exit, /offline, /online, /busy, /away, /main Sound notifications: Get audio alerts on contact online, message received, buzz Broadcast for group: You can ri...VivoSocial: VivoSocial 7.4.2: Version 7.4.2 of VivoSocial has been released. If you experienced any issues with the previous version, please update your modules to the 7.4.2 release and see if they persist. If you have any questions about this release, please post them in our Support forums. If you are experiencing a bug or would like to request a new feature, please submit it to our issue tracker. Web Controls * Updated Business Objects and added a new SQL Data Provider File. Groups * Fixed a security issue whe...PHP Manager for IIS: PHP Manager 1.1.1 for IIS 7: This is a minor release of PHP Manager for IIS 7. It contains all the functionality available in 56962 plus several bug fixes (see change list for more details). Also, this release includes Russian language support. SHA1 codes for the downloads are: PHPManagerForIIS-1.1.0-x86.msi - 6570B4A8AC8B5B776171C2BA0572C190F0900DE2 PHPManagerForIIS-1.1.0-x64.msi - 12EDE004EFEE57282EF11A8BAD1DC1ADFD66A654mojoPortal: 2.3.6.1: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2361-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Parallel Programming with Microsoft Visual C++: Drop 6 - Chapters 4 and 5: This is Drop 6. It includes: Drafts of the Preface, Introduction, Chapters 2-7, Appendix B & C and the glossary Sample code for chapters 2-7 and Appendix A & B. The new material we'd like feedback on is: Chapter 4 - Parallel Aggregation Chapter 5 - Futures The source code requires Visual Studio 2010 in order to run. There is a known bug in the A-Dash sample when the user attempts to cancel a parallel calculation. We are working to fix this.NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.160: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release improves NodeXL's Twitter and Pajek features. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file in Windows Explorer and select "Extract All." Close Ex...New Projectsabcdeffff: aaaaaaaaaaaaaaaaaaaaaaaaaaAutomating Variation: This project help you to automate the Site Variation in SharePoint 2010BAM Converter: DEMO Project showcasing several functionalities of Windows Phone 7 - Isolated Storage, Web Service Access, User Interface.cstgamebgs: Project for wp7DFS-Commands: A PowerShell module containing functions for manipulating Distributed File System (DFS). This allows admins to carry out DFS tasks using PowerShell without resorting to external commands such as dfsutil.exe, dfscmd.exe or modlink.exe.Disk Usage: Disk Usage is a small WPF tool to analyze the drive space on Windows. It can plot pie charts of the folder size. EPiServer Filtered Page Reference Properties: The EPiServer Filtered Page Reference properties provide you with the ability to restrict the pages in which an EPiServer can pick. The assembly once depoyed to your projects bin folder will add two new properties: -FilteredPageReferenceProperty -FilteredLinkCollectoinPropertyExample Ajax MVC address-book: This is an example application in PHP, using no framework but PHP only, utilizing MVC, SQLite, jQuery and Ajax. It is fully SOA. FlyMedia: FlyMedia is a simple music player written in C/C++ based on FMOD and Gdiplus. It aims to fly your media at a touch!Global String Formatter: The Global String Formatter library allows developers to deal with conditional string formatting in an elegant fashion. Developers specify a predicate and a corresponding string output function for each case of the formatting. The library plays well with DI frameworks.JS Mixer: JS Mixer is a simple UI over the YUI Compressor for .Net Library. It allows you to merge and minimize javascript files easily.LAPD: Lapd (Location and Attendance to Dependant People) make care-dependent people's life easier, improving the communication between their care providers and them. It is developed in C# over .NET Compact Framework 3.5motion10 SharePoint Twitter Status Notes Control: Change the normal SharePoint Status control to the motion10 SharePoint Twitter Status Notes Control and you can send your tweets to Twitter! Music TD: Music TD is a Tower Defence project by Cypress Falls High School programming team. It is our first game, made in XNA.OJDetective: a win32 project for detecting your submissons on OJOpalis System Center VMM Extended Integration Pack: A Opalis Integration Pack for VMM with extended Functions to the offical IP from Microsoft.Opalis Virsto Integration Pack: A Opalis Integration Pack for Managing VirstoOne Hyper-V Storage (http://www.virsto.com) Pimp My Wave: It will be both an open source implementation of Multiloader / Kies firmware flasher and modding tool like changing boot screens directly. RESTful Connector for SharePoint 2010: This is a reusable custom connector for Business Data Connectivity Serivces in SharePoint 2010. It uses a RESTful service as a data source and XPath to map the propeties.SCWS: SCWS - XML web service for Microsoft System Center Operations Manager (AKA SCOM / OpsMgr). Developed in C# and .Net 3.5 with Visual Studio 2010. Can be used to get information on MonitoringObjects and to control maintenance mode. Ideal for integration with SCCM / ConfigMgr.somelameaspstuff: see titleSQLMap: Projeto com um Atlas do Mundo e suas divisões, salvos em tabelas no SQL Server, usando o seu módulo SpatialStackOverflow Google Chrome extension: Shows StackOverflow and StackExchange questions in new tab window in your Google ChromeSupMoul: Moulinette pour noter les supTodayTodo: This is software for manage every day tasks (one todo list for day). Silverlight (OOB), NoSQL, FullText Search for all task history

  Read the article

• CodePlex Daily Summary for Tuesday, February 15, 2011

  CodePlex Daily Summary for Tuesday, February 15, 2011Popular ReleasesAllNewsManager.NET: AllNewsManager.NET 1.3: AllNewsManager.NET 1.3. This new version provide several new features, improvements and bug fixes. Some new features: Online Users. Avatars. Copy function (to create a new article from another one). SEO improvements (friendly urls). New admin buttons. And more...Comet - Visual Studio 2010 Addin: Installers: Offers the basic functionality of generating constructors from data members or from superclass. The current release does not respect the user's indentation preferences.Facebook Graph Toolkit: Facebook Graph Toolkit 0.8: Version 0.8 (15 Feb 2011)moved to Beta stage publish photo feature "email" field of User object added new Graph Api object: Group, Event new Graph Api connection: likes, groups, eventsDJME - The jQuery extensions for ASP.NET MVC: DJME2 -The jQuery extensions for ASP.NET MVC beta2: The source code and runtime library for DJME2. For more product info you can goto http://www.dotnetage.com/djme.html What is new ?The Grid extension added The ModelBinder added which helping you create Bindable data Action. The DnaFor() control factory added that enabled Model bindable extensions. Enhance the ListBox , ComboBox data binding.Jint - Javascript Interpreter for .NET: Jint - 0.9.0: New CLR interoperability features Many bugfixesBuild Version Increment Add-In Visual Studio: Build Version Increment v2.4.11046.2045: v2.4.11046.2045 Fixes and/or Improvements:Major: Added complete support for VC projects including .vcxproj & .vcproj. All padding issues fixed. A project's assembly versions are only changed if the project has been modified. Minor Order of versioning style values is now according to their respective positions in the attributes i.e. Major, Minor, Build, Revision. Fixed issue with global variable storage with some projects. Fixed issue where if a project item's file does not exist, a ...Document.Editor: 2011.4: Whats new for Document.Editor 2011.4: New Subscript support New Superscript support New column display in statusbar Improved dialogs Minor Bug Fix's, improvements and speed upsCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1.1: Coding4Fun.Phone.Toolkit v1.1 release. Bug fixes and minor feature requests addedTV4Home - The all-in-one TV solution!: 0.1.0.0 Preview: This is the beta preview release of the TV4Home software.Finestra Virtual Desktops: 1.2: Fixes a few minor issues with 1.1 including the broken per-desktop backgrounds Further improves the speed of switching desktops A few UI performance improvements Added donations linksNuGet: NuGet 1.1: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. The URL to the package OData feed is: http://go.microsoft.com/fwlink/?LinkID=206669 To see the list of issues fixed in this release, visit this our issues listEnhSim: EnhSim 2.4.0: 2.4.0This release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Changes since 2.3.0 - Upd...Sterling Isolated Storage Database with LINQ for Silverlight and Windows Phone 7: Sterling OODB v1.0: Note: use this changeset to download the source example that has been extended to show database generation, backup, and restore in the desktop example. Welcome to the Sterling 1.0 RTM. This version is not backwards-compatible with previous versions of Sterling. Sterling is also available via NuGet. This product has been used and tested in many applications and contains a full suite of unit tests. You can refer to the User's Guide for complete documentation, and use the unit tests as guide...PDF Rider: PDF Rider 0.5.1: Changes from the previous version * Use dynamic layout to better fit text in other languages * Includes French and Spanish localizations Prerequisites * Microsoft Windows Operating Systems (XP - Vista - 7) * Microsoft .NET Framework 3.5 runtime * A PDF rendering software (i.e. Adobe Reader) that can be opened inside Internet Explorer. Installation instructionsChoose one of the following methods: 1. Download and run the "pdfRider0.5.1-setup.exe" (reccomended) 2. Down...Snoop, the WPF Spy Utility: Snoop 2.6.1: This release is a bug fixing release. Most importantly, issues have been seen around WPF 4.0 applications not always showing up in the app chooser. Hopefully, they are fixed now. I thought this issue warranted a minor release since more and more people are going WPF 4.0 and I don't want anyone to have any problems. Dan Hanan also contributes again with several usability features. Thanks Dan! Happy Snooping! p.s. By request, I am also attaching a .zip file ... so that people can install it ...RIBA - Rich Internet Business Application for Silverlight: Preview of MVVM Framework Source + Tutorials: This is a first public release of the MVVM Framework which is part of the final RIBA application. The complete RIBA example LOB application has yet to be published. Further Documentation on the MVVM part can be found on the Blog, http://www.SilverlightBlog.Net and in the downloadable source ( mvvm/doc/ ). Please post all issues and suggestions in the issue tracker.SharePoint Learning Kit: 1.5: SharePoint Learning Kit 1.5 has the following new functionality: *Support for SharePoint 2010 *E-Learning Actions can be localised *Two New Document Library Edit Options *Automatically add the Assignment List Web Part to the Web Part Gallery *Various Bug Fixes for the Drop Box There are 2 downloads for this release SLK-1.5-2010.zip for SharePoint 2010 SLK-1.5-2007.zip for SharePoint 2007 (WSS3 & MOSS 2007)GMare: GMare Alpha 02: Alpha version 2. With fixes detailed in the issue tracker.Facebook C# SDK: 5.0.3 (BETA): This is fourth BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. For more information about this release see the following blog posts: Facebook C# SDK - Writing your first Facebook Application Facebook C# SDK v5 Beta Internals Facebook C# SDK V5.0.0 (BETA) Released We have spend time trying ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.161: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a new Twitter List network importer, makes some minor feature improvements, and fixes a few bugs. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file...New Projects.NET JSON parser & deserializer: JSON.net makes it easy to consume JSON encoded objects in your application. It features a fast parser and deserializer written in C# 2.0 with a simple and intuitive API making integration in your application a breeze Actor Look: Single screen Actor Outlook(ActorLook) for Skelta.Its skelta based work item component.Its providing outlook features like Compose, Inbox,Outbox(which acted by me), My Requests (wf created by me) and generic custom request history tracking.AJAX Mapping Performance Tests: This project contains simple test html pages that compare the performance of Bing Maps V6.3, Bing Maps V7 and Google Maps V3 when displaying increasing numbers of pushpins on a map.Author-it DITA Project: The Author-it DITA Project contains components that enable importing, authoring, and publishing DITA content using Author-it software.Author-it PowerShell Project: The Author-it PowerShell Project provides cmdlets that allow you to interact with Author-it objects using PowerShell scripts.BizTalk Message Decompressor: This tool, written in C#, enables you to decompress BizTalk messages/context from a screen that looks like SQL Query Analyzer. By simple entering a SQL query and some custom functions, you can retrieve (partial) message content and/or context. Handy for administrators/engineers!CavemanTools Mvc: Asp.Net Mvc 3 toolkit for faster development with less code. Features theming support for both Razor and WebForm engines and easy to use helpers. It's developed in C#, .Net 4 .CityLizard XML Schema Pack: The project is for contribution of XML Schemas to CityLizard Framework.crazyKTV: this is a KTV system from TaiwanException Catcher: Exception catcher is a tool, it can attach to any .net process in the system and record all exceptions(including 1st chance exception) thrown in the process.Export Test Cases From TFS: This project lets the users to export the test cases present in form Work items in TFS 2010 to MS Excel.Extended Text Library for Small Basic: This library extend "Text" class of Microsoft Small Basic to append custom methods, such as Split, Replace, and so on. Small Basic ? Text ???? Split ? Replace ????????????、?????????。fossilGui: Gui for fossil (http://www.fossil-scm.org)Gamoliyas: Gamoliyas is an open source John Conway's Game of Life game totally written in DHTML (JavaScript, CSS and HTML). Uses mouse and keyboard. Very configurable. This cross-platform and cross-browser game was tested under BeOS, Linux, *BSD, Windows and others.Gilly Messenger - MSN clone written in VB6: Gilly Messenger is a MSN client built in Visual Basic 6 in 2002-2004 by CrackSoft. It is now open sourced.jetzt liveticker: A desktop version of the liveticker for "jetzt.de", a german online communityLMKTool: LMKTool is a small project that helps users to migrate Thales cryptographic keys from the old LMK to the new LMK set.LocalAdmins WMI Provider: WMI Provider to report all members of the local Administrators group in the WMI Class root\cimv2\Win32_LocalAdminsMarbles CMS: Marbles aims to be a simple Content Management Server for hosting multiple websites.MediaElement Extensions: MediaElement Extensions makes it easier for WPF/SilverLight Developers to interact with MediaElement. You will no longer have to handle media and user events... Controls: ProgressSlider / VolumeSlider / Buttons (Play, Pause, Stop, FullScreen..) Features: PlaylistManagementMessage Router: MessageRouter enables routing of messages in a heterogeneous environment: - ServiceBroker queue - MSMQ - FTP - othersMultiUp: Silverlight application for multiple files upload and recoverymuzoblog: muzoblogMVC 3 con Razor - Mercurial: Proyecto MVC 3 con Razor para trabajar en un proyecto desde cero, con control de código en Mercurial.Opalis Exchange Calendaring Integration Pack: An integration pack for Opalis extending functionality to exchange calendaring features.OpenEMIS: OpenEMIS is a generic open source Education Management Information System (EMIS) developped by UNESCO.PFC2011: My PFC ^^Proyecto español. Aplicacion tpv para bar pub , gestion ... opensource: España Aplicacion tpv para bar pub , gestion ... opensource Datos con XML y resportes con Crystal Reports. Imagen: http://img375.imageshack.us/i/proba1xml.jpg/Realtime C# Pitch Tracker: Use the PitchTracker class to easily track the pitch of a waveform (typically from vocals). It is fast (~3000 detections/sec) and accurate (within 0.02% of the actual frequency). It is written in C#. A sample app is included.SCOM Maintenance Mode Tool: A maintenance mode tool for System Center Operations Manager (SCOM)scooby: This is a scooby dooby doo projectSDSConsulting: Samples, resources, and solutions provided by SDS Consulting.SilverPop: Silverpop is a Silverlight 4, PRISM, MVVM demonstration application that demonstrates basic use of these concepts plus how to visualise data in a diagram. It is an accompaniment to a series of blog posts.Skywave Class Library: Skywave Class Library will contain multiple projects (one at start) targeting classes, interfaces, controls and ... for different .Net technologies like ASP.Net, WPF, Windows Forms, ... and one Core Project including shared classes. It's my shared library of 10 years development.Sofire FX: .NET ???????????，?????????????????，??? Sofire ????????！SQL Server Process Info Log: The SQL Server Process Info Log makes it easier to identify the cause of CPU & Physical Disk resource consumption by facilitating the production of visualizations that help pinpoint the smoking gun.Sup!: IIS7.5 + .NET4 + DLR + JSON.NET = Sup! Replacement for ASP.NET web services. Makes interacting with clients of all types pretty and easy. Right now it's like: "What? I can't hear you. My iPhone sucks." With Sup! it's like: "Sup."sven's msvs addons: A couple quick Visual Studio addons implementing features I missed from other IDEs. The first, MultiLineComments, implements inline comment wrapping as per Matlab. The second, FunctionBar, is a function-list C/C++ file navigation bar inspired by XCode. Both are written in C#.UHEMS: This Web Based Employee Management System With the following modules. 1. Employee Registration 2. Attendance Module 3. Leave Module 4. Payroll Processing 5. Reports 6. Independent User and Admin Registration Module 7. ResignationWebsite Monitor: Website monitorWMI Performance Counter Logging Console App: A demonstration how to create and populate a datawarehouse of WMI counters which can be used to diagnose performance problems. A presentation provided demonstrates how to detect IIS/ASP.NET thread starvation.YuxinProjs: YuxinProjs Hello World

  Read the article

• What's up with OCFS2?

  - by wcoekaer

  On Linux there are many filesystem choices and even from Oracle we provide a number of filesystems, all with their own advantages and use cases. Customers often confuse ACFS with OCFS or OCFS2 which then causes assumptions to be made such as one replacing the other etc... I thought it would be good to write up a summary of how OCFS2 got to where it is, what we're up to still, how it is different from other options and how this really is a cool native Linux cluster filesystem that we worked on for many years and is still widely used. Work on a cluster filesystem at Oracle started many years ago, in the early 2000's when the Oracle Database Cluster development team wrote a cluster filesystem for Windows that was primarily focused on providing an alternative to raw disk devices and help customers with the deployment of Oracle Real Application Cluster (RAC). Oracle RAC is a cluster technology that lets us make a cluster of Oracle Database servers look like one big database. The RDBMS runs on many nodes and they all work on the same data. It's a Shared Disk database design. There are many advantages doing this but I will not go into detail as that is not the purpose of my write up. Suffice it to say that Oracle RAC expects all the database data to be visible in a consistent, coherent way, across all the nodes in the cluster. To do that, there were/are a few options : 1) use raw disk devices that are shared, through SCSI, FC, or iSCSI 2) use a network filesystem (NFS) 3) use a cluster filesystem(CFS) which basically gives you a filesystem that's coherent across all nodes using shared disks. It is sort of (but not quite) combining option 1 and 2 except that you don't do network access to the files, the files are effectively locally visible as if it was a local filesystem. So OCFS (Oracle Cluster FileSystem) on Windows was born. Since Linux was becoming a very important and popular platform, we decided that we would also make this available on Linux and thus the porting of OCFS/Windows started. The first version of OCFS was really primarily focused on replacing the use of Raw devices with a simple filesystem that lets you create files and provide direct IO to these files to get basically native raw disk performance. The filesystem was not designed to be fully POSIX compliant and it did not have any where near good/decent performance for regular file create/delete/access operations. Cache coherency was easy since it was basically always direct IO down to the disk device and this ensured that any time one issues a write() command it would go directly down to the disk, and not return until the write() was completed. Same for read() any sort of read from a datafile would be a read() operation that went all the way to disk and return. We did not cache any data when it came down to Oracle data files. So while OCFS worked well for that, since it did not have much of a normal filesystem feel, it was not something that could be submitted to the kernel mail list for inclusion into Linux as another native linux filesystem (setting aside the Windows porting code ...) it did its job well, it was very easy to configure, node membership was simple, locking was disk based (so very slow but it existed), you could create regular files and do regular filesystem operations to a certain extend but anything that was not database data file related was just not very useful in general. Logfiles ok, standard filesystem use, not so much. Up to this point, all the work was done, at Oracle, by Oracle developers. Once OCFS (1) was out for a while and there was a lot of use in the database RAC world, many customers wanted to do more and were asking for features that you'd expect in a normal native filesystem, a real "general purposes cluster filesystem". So the team sat down and basically started from scratch to implement what's now known as OCFS2 (Oracle Cluster FileSystem release 2). Some basic criteria were : Design it with a real Distributed Lock Manager and use the network for lock negotiation instead of the disk Make it a Linux native filesystem instead of a native shim layer and a portable core Support standard Posix compliancy and be fully cache coherent with all operations Support all the filesystem features Linux offers (ACL, extended Attributes, quotas, sparse files,...) Be modern, support large files, 32/64bit, journaling, data ordered journaling, endian neutral, we can mount on both endian /cross architecture,.. Needless to say, this was a huge development effort that took many years to complete. A few big milestones happened along the way... OCFS2 was development in the open, we did not have a private tree that we worked on without external code review from the Linux Filesystem maintainers, great folks like Christopher Hellwig reviewed the code regularly to make sure we were not doing anything out of line, we submitted the code for review on lkml a number of times to see if we were getting close for it to be included into the mainline kernel. Using this development model is standard practice for anyone that wants to write code that goes into the kernel and having any chance of doing so without a complete rewrite or.. shall I say flamefest when submitted. It saved us a tremendous amount of time by not having to re-fit code for it to be in a Linus acceptable state. Some other filesystems that were trying to get into the kernel that didn't follow an open development model had a lot harder time and a lot harsher criticism. March 2006, when Linus released 2.6.16, OCFS2 officially became part of the mainline kernel, it was accepted a little earlier in the release candidates but in 2.6.16. OCFS2 became officially part of the mainline Linux kernel tree as one of the many filesystems. It was the first cluster filesystem to make it into the kernel tree. Our hope was that it would then end up getting picked up by the distribution vendors to make it easy for everyone to have access to a CFS. Today the source code for OCFS2 is approximately 85000 lines of code. We made OCFS2 production with full support for customers that ran Oracle database on Linux, no extra or separate support contract needed. OCFS2 1.0.0 started being built for RHEL4 for x86, x86-64, ppc, s390x and ia64. For RHEL5 starting with OCFS2 1.2. SuSE was very interested in high availability and clustering and decided to build and include OCFS2 with SLES9 for their customers and was, next to Oracle, the main contributor to the filesystem for both new features and bug fixes. Source code was always available even prior to inclusion into mainline and as of 2.6.16, source code was just part of a Linux kernel download from kernel.org, which it still is, today. So the latest OCFS2 code is always the upstream mainline Linux kernel. OCFS2 is the cluster filesystem used in Oracle VM 2 and Oracle VM 3 as the virtual disk repository filesystem. Since the filesystem is in the Linux kernel it's released under the GPL v2 The release model has always been that new feature development happened in the mainline kernel and we then built consistent, well tested, snapshots that had versions, 1.2, 1.4, 1.6, 1.8. But these releases were effectively just snapshots in time that were tested for stability and release quality. OCFS2 is very easy to use, there's a simple text file that contains the node information (hostname, node number, cluster name) and a file that contains the cluster heartbeat timeouts. It is very small, and very efficient. As Sunil Mushran wrote in the manual : OCFS2 is an efficient, easily configured, quickly installed, fully integrated and compatible, feature-rich, architecture and endian neutral, cache coherent, ordered data journaling, POSIX-compliant, shared disk cluster file system. Here is a list of some of the important features that are included : Variable Block and Cluster sizes Supports block sizes ranging from 512 bytes to 4 KB and cluster sizes ranging from 4 KB to 1 MB (increments in power of 2). Extent-based Allocations Tracks the allocated space in ranges of clusters making it especially efficient for storing very large files. Optimized Allocations Supports sparse files, inline-data, unwritten extents, hole punching and allocation reservation for higher performance and efficient storage. File Cloning/snapshots REFLINK is a feature which introduces copy-on-write clones of files in a cluster coherent way. Indexed Directories Allows efficient access to millions of objects in a directory. Metadata Checksums Detects silent corruption in inodes and directories. Extended Attributes Supports attaching an unlimited number of name:value pairs to the file system objects like regular files, directories, symbolic links, etc. Advanced Security Supports POSIX ACLs and SELinux in addition to the traditional file access permission model. Quotas Supports user and group quotas. Journaling Supports both ordered and writeback data journaling modes to provide file system consistency in the event of power failure or system crash. Endian and Architecture neutral Supports a cluster of nodes with mixed architectures. Allows concurrent mounts on nodes running 32-bit and 64-bit, little-endian (x86, x86_64, ia64) and big-endian (ppc64) architectures. In-built Cluster-stack with DLM Includes an easy to configure, in-kernel cluster-stack with a distributed lock manager. Buffered, Direct, Asynchronous, Splice and Memory Mapped I/Os Supports all modes of I/Os for maximum flexibility and performance. Comprehensive Tools Support Provides a familiar EXT3-style tool-set that uses similar parameters for ease-of-use. The filesystem was distributed for Linux distributions in separate RPM form and this had to be built for every single kernel errata release or every updated kernel provided by the vendor. We provided builds from Oracle for Oracle Linux and all kernels released by Oracle and for Red Hat Enterprise Linux. SuSE provided the modules directly for every kernel they shipped. With the introduction of the Unbreakable Enterprise Kernel for Oracle Linux and our interest in reducing the overhead of building filesystem modules for every minor release, we decide to make OCFS2 available as part of UEK. There was no more need for separate kernel modules, everything was built-in and a kernel upgrade automatically updated the filesystem, as it should. UEK allowed us to not having to backport new upstream filesystem code into an older kernel version, backporting features into older versions introduces risk and requires extra testing because the code is basically partially rewritten. The UEK model works really well for continuing to provide OCFS2 without that extra overhead. Because the RHEL kernel did not contain OCFS2 as a kernel module (it is in the source tree but it is not built by the vendor in kernel module form) we stopped adding the extra packages to Oracle Linux and its RHEL compatible kernel and for RHEL. Oracle Linux customers/users obviously get OCFS2 included as part of the Unbreakable Enterprise Kernel, SuSE customers get it by SuSE distributed with SLES and Red Hat can decide to distribute OCFS2 to their customers if they chose to as it's just a matter of compiling the module and making it available. OCFS2 today, in the mainline kernel is pretty much feature complete in terms of integration with every filesystem feature Linux offers and it is still actively maintained with Joel Becker being the primary maintainer. Since we use OCFS2 as part of Oracle VM, we continue to look at interesting new functionality to add, REFLINK was a good example, and as such we continue to enhance the filesystem where it makes sense. Bugfixes and any sort of code that goes into the mainline Linux kernel that affects filesystems, automatically also modifies OCFS2 so it's in kernel, actively maintained but not a lot of new development happening at this time. We continue to fully support OCFS2 as part of Oracle Linux and the Unbreakable Enterprise Kernel and other vendors make their own decisions on support as it's really a Linux cluster filesystem now more than something that we provide to customers. It really just is part of Linux like EXT3 or BTRFS etc, the OS distribution vendors decide. Do not confuse OCFS2 with ACFS (ASM cluster Filesystem) also known as Oracle Cloud Filesystem. ACFS is a filesystem that's provided by Oracle on various OS platforms and really integrates into Oracle ASM (Automatic Storage Management). It's a very powerful Cluster Filesystem but it's not distributed as part of the Operating System, it's distributed with the Oracle Database product and installs with and lives inside Oracle ASM. ACFS obviously is fully supported on Linux (Oracle Linux, Red Hat Enterprise Linux) but OCFS2 independently as a native Linux filesystem is also, and continues to also be supported. ACFS is very much tied into the Oracle RDBMS, OCFS2 is just a standard native Linux filesystem with no ties into Oracle products. Customers running the Oracle database and ASM really should consider using ACFS as it also provides storage/clustered volume management. Customers wanting to use a simple, easy to use generic Linux cluster filesystem should consider using OCFS2. To learn more about OCFS2 in detail, you can find good documentation on http://oss.oracle.com/projects/ocfs2 in the Documentation area, or get the latest mainline kernel from http://kernel.org and read the source. One final, unrelated note - since I am not always able to publicly answer or respond to comments, I do not want to selectively publish comments from readers. Sometimes I forget to publish comments, sometime I publish them and sometimes I would publish them but if for some reason I cannot publicly comment on them, it becomes a very one-sided stream. So for now I am going to not publish comments from anyone, to be fair to all sides. You are always welcome to email me and I will do my best to respond to technical questions, questions about strategy or direction are sometimes not possible to answer for obvious reasons.

  Read the article

• problems mounting an external IDE drive via USB in ubuntu

  - by Roy Rico

  I am having a problem connecting a specific IDE drive to my linux box. It's an old drive which I just want to get about 3 GB of files off of. INFO I am trying to connect a 200GB IDE Maxtor Drive, internally and externally... externally: I am using an self powered USB IDE external drive enclosure which I have used to connect various drives, under ubuntu and windows, in the past. The other posts stated it coudl be a problem I think i may have formatted the /dev/sdc partition instead of /dev/sdc1 partition when i originally formatted the drive. internally: I only have one machine left that has an internal IDE interface, and it's got XP on it. I plugged this drive internally into this machine with windows XP and used the ext2/ext3 drivers to mount this drive, but some files have question marks (?) in the file names which is messing up my copy process in windows. I can't delete the files under windows. Ubuntu Linux will not install on my only remaining machine that has IDE controller. I have tried the suggestions in the questions below http://superuser.com/questions/88182/mount-an-external-drive-in-ubuntu http://superuser.com/questions/23210/ubuntu-fails-to-mount-usb-drive it looks like i can see the drive in /proc/partitions $ cat /proc/partitions major minor #blocks name 8 0 78125000 sda 8 1 74894998 sda1 8 2 1 sda2 8 5 3229033 sda5 8 16 199148544 sdb <-- could be my drive? but it's not listed under fdisk -l $ fdisk -l Disk /dev/sda: 80.0 GB, 80000000000 bytes 255 heads, 63 sectors/track, 9726 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd0f4738c Device Boot Start End Blocks Id System /dev/sda1 * 1 9324 74894998+ 83 Linux /dev/sda2 9325 9726 3229065 5 Extended /dev/sda5 9325 9726 3229033+ 82 Linux swap / Solaris and here is my log of /var/log/messages. with a bunch of weird output, can someone let me know what that weird output is? Mar 3 19:49:40 mala kernel: [687455.112029] usb 1-7: new high speed USB device using ehci_hcd and address 3 Mar 3 19:49:41 mala kernel: [687455.248576] usb 1-7: configuration #1 chosen from 1 choice Mar 3 19:49:41 mala kernel: [687455.267450] Initializing USB Mass Storage driver... Mar 3 19:49:41 mala kernel: [687455.269180] scsi4 : SCSI emulation for USB Mass Storage devices Mar 3 19:49:41 mala kernel: [687455.269410] usbcore: registered new interface driver usb-storage Mar 3 19:49:41 mala kernel: [687455.269416] USB Mass Storage support registered. Mar 3 19:49:46 mala kernel: [687460.270917] scsi 4:0:0:0: Direct-Access Maxtor 6 Y200P0 YAR4 PQ: 0 ANSI: 2 Mar 3 19:49:46 mala kernel: [687460.271485] sd 4:0:0:0: Attached scsi generic sg2 type 0 Mar 3 19:49:46 mala kernel: [687460.278858] sd 4:0:0:0: [sdb] 398297088 512-byte logical blocks: (203 GB/189 GiB) Mar 3 19:49:46 mala kernel: [687460.280866] sd 4:0:0:0: [sdb] Write Protect is off Mar 3 19:50:16 mala kernel: [687460.283784] sdb: Mar 3 19:50:16 mala kernel: [687491.112020] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:50:47 mala kernel: [687522.120030] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:18 mala kernel: [687553.112034] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:51:49 mala kernel: [687584.116025] usb 1-7: reset high speed USB device using ehci_hcd and address 3 Mar 3 19:52:02 mala kernel: [687596.170632] type=1505 audit(1267671122.035:31): operation="profile_replace" pid=8426 name=/usr/lib/cups/backend/cups-pdf Mar 3 19:52:02 mala kernel: [687596.171551] type=1505 audit(1267671122.035:32): operation="profile_replace" pid=8426 name=/usr/sbin/cupsd Mar 3 19:52:06 mala kernel: [687600.908056] async/0 D c08145c0 0 7655 2 0x00000000 Mar 3 19:52:06 mala kernel: [687600.908062] e5601d38 00000046 e5774000 c08145c0 e4c2a848 c08145c0 d203973a 0002713d Mar 3 19:52:06 mala kernel: [687600.908072] c08145c0 c08145c0 e4c2a848 c08145c0 00000000 0002713d c08145c0 f0a98c00 Mar 3 19:52:06 mala kernel: [687600.908079] e4c2a5b0 c20125c0 00000002 e5601d80 e5601d44 c056f3be e5601d78 e5601d4c Mar 3 19:52:06 mala kernel: [687600.908087] Call Trace: Mar 3 19:52:06 mala kernel: [687600.908099] [<c056f3be>] io_schedule+0x1e/0x30 Mar 3 19:52:06 mala kernel: [687600.908107] [<c01b2cf5>] sync_page+0x35/0x40 Mar 3 19:52:06 mala kernel: [687600.908111] [<c056f8f7>] __wait_on_bit_lock+0x47/0x90 Mar 3 19:52:06 mala kernel: [687600.908115] [<c01b2cc0>] ? sync_page+0x0/0x40 Mar 3 19:52:06 mala kernel: [687600.908121] [<c020f390>] ? blkdev_readpage+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908125] [<c01b2ca9>] __lock_page+0x79/0x80 Mar 3 19:52:06 mala kernel: [687600.908130] [<c015c130>] ? wake_bit_function+0x0/0x50 Mar 3 19:52:06 mala kernel: [687600.908135] [<c01b459f>] read_cache_page_async+0xbf/0xd0 Mar 3 19:52:06 mala kernel: [687600.908139] [<c01b45c2>] read_cache_page+0x12/0x60 Mar 3 19:52:06 mala kernel: [687600.908144] [<c0232dca>] read_dev_sector+0x3a/0x80 Mar 3 19:52:06 mala kernel: [687600.908148] [<c0233d3e>] adfspart_check_ICS+0x1e/0x160 Mar 3 19:52:06 mala kernel: [687600.908152] [<c023339f>] ? disk_name+0xaf/0xc0 Mar 3 19:52:06 mala kernel: [687600.908157] [<c0233d20>] ? adfspart_check_ICS+0x0/0x160 Mar 3 19:52:06 mala kernel: [687600.908161] [<c02334de>] check_partition+0x10e/0x180 Mar 3 19:52:06 mala kernel: [687600.908165] [<c02335f6>] rescan_partitions+0xa6/0x330 Mar 3 19:52:06 mala kernel: [687600.908171] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908175] [<c0312472>] ? kobject_get+0x12/0x20 Mar 3 19:52:06 mala kernel: [687600.908180] [<c039fc43>] ? get_device+0x13/0x20 Mar 3 19:52:06 mala kernel: [687600.908185] [<c03c263f>] ? sd_open+0x5f/0x1b0 Mar 3 19:52:06 mala kernel: [687600.908189] [<c020fda0>] __blkdev_get+0x140/0x310 Mar 3 19:52:06 mala kernel: [687600.908194] [<c020f0ac>] ? bdget+0xec/0x100 Mar 3 19:52:06 mala kernel: [687600.908198] [<c020ff7a>] blkdev_get+0xa/0x10 Mar 3 19:52:06 mala kernel: [687600.908202] [<c0232f30>] register_disk+0x120/0x140 Mar 3 19:52:06 mala kernel: [687600.908207] [<c0308b4d>] ? blk_register_region+0x2d/0x40 Mar 3 19:52:06 mala kernel: [687600.908211] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908216] [<c0308cf0>] add_disk+0x80/0x140 Mar 3 19:52:06 mala kernel: [687600.908221] [<c03084f0>] ? exact_match+0x0/0x10 Mar 3 19:52:06 mala kernel: [687600.908225] [<c0308860>] ? exact_lock+0x0/0x20 Mar 3 19:52:06 mala kernel: [687600.908230] [<c03c53df>] sd_probe_async+0xff/0x1c0

  Read the article

< Previous Page | 699 700 701 702 703 704 705 706 707 708 709 710  | Next Page >