Search Results

Search found 22951 results on 919 pages for 'debug build'.

Page 705/919 | < Previous Page | 701 702 703 704 705 706 707 708 709 710 711 712  | Next Page >

• Resolving NameErrors -- Getting NameError on RAILS_END in rails_end.rb When using desert plugin and

  - by dr

  What's an effective approach to debug NameErrors in Rails? I'm trying to use the desert plugin (0.5.0) and the edge version of Community_Engine. I've started from scratch and gone through the installation instructions. When I attempt to start my server, I get this error: "Constant RAILS_END from rails_end.rb not found (NameError)". Problem is I cannot find rails_end.rb, nor can I find a google reference to this file or error. I've verified that the required gems are installed and current. I've dug around google and desert, but haven't found any reference to this constant. Any ideas? Thanks Here's my stack trace: => Booting Mongrel => Rails 2.3.2 application starting on http://0.0.0.0:3000 /opt/local/lib/ruby/gems/1.8/gems/desert-0.5.0/lib/desert/rails/ dependencies.rb:15:in `load_missing_constant': Constant RAILS_END from rails_end.rb not found (NameError) from /Users/dmr/.gem/ruby/1.8/gems/activesupport-2.3.2/lib/ active_support/dependencies.rb:80:in `const_missing' from /Users/dmr/.gem/ruby/1.8/gems/activesupport-2.3.2/lib/ active_support/dependencies.rb:92:in `const_missing' from /Users/dmr/dev/lionfold/config/environment.rb:32 from /Users/dmr/.gem/ruby/1.8/gems/rails-2.3.2/lib/ initializer.rb:111:in `run' from /Users/dmr/dev/myapp/config/environment.rb:31 from /opt/local/lib/ruby/vendor_ruby/1.8/rubygems/ custom_require.rb:31:in `gem_original_require' from /opt/local/lib/ruby/vendor_ruby/1.8/rubygems/ custom_require.rb:31:in `require' from /Users/dmr/.gem/ruby/1.8/gems/activesupport-2.3.2/lib/ active_support/dependencies.rb:156:in `require' from /Users/dmr/.gem/ruby/1.8/gems/activesupport-2.3.2/lib/ active_support/dependencies.rb:521:in `new_constants_in' from /Users/dmr/.gem/ruby/1.8/gems/activesupport-2.3.2/lib/ active_support/dependencies.rb:156:in `require' from /Users/dmr/.gem/ruby/1.8/gems/rails-2.3.2/lib/commands/ server.rb:84 from /opt/local/lib/ruby/vendor_ruby/1.8/rubygems/ custom_require.rb:31:in `gem_original_require' from /opt/local/lib/ruby/vendor_ruby/1.8/rubygems/ custom_require.rb:31:in `require' from script/server:3

  Read the article

• Add jquery autocomplete on ready to multiple text inputs

  - by marcinn

  Hi, I have problem in adding autocomplete plugin to multiple text inputs in loop (no errors are returned). // get text inputs to attach autocomplete var locinputs = $('#localizations').find('input:text'); // iterate over elements and add autocomplete plugin for (var i = 0; i < locinputs.length; i++) { // asp.mvc array with special characters replacing var locNameField = locinputs[i].name.replace('[', '\\\\['); locNameField = locNameField.replace(']', '\\\\]'); locNameField = locNameField.replace('.', '\\\\.'); $('input#' + locNameField).autocomplete('<%=Url.Action("GetCity", "Localization") %>', { extraParams: { provinceId: function () { return 21; } }, dataType: 'json', parse: function (data) { var rows = new Array(); for (var i = 0; i < data.length; i++) { rows[i] = { data: data[i], value: data[i].PlaceId, result: data[i].Name }; } return rows; }, formatItem: function (row, i, n) { return row.Name; }, width: 300, mustMatch: true, multiple: true }); } There is no error on loading, I tried to debug using Firebug, elements are accessible by jquery selector

  Read the article

• How do you update table row background color in IE using Javascript/CSS ?

  - by giulio

  I have a table that i want to "highlight" during onmouseover/onmouseout. I already know this is required in IE but not in other browsers. I have managed to detect the events triggering and this TR tag effectively works. (Note that the originating class "contentTableRow" doesn't seem to be causing any issues.) class="contentTableRow" onclick="openForm('SomeID');" onmouseover="highlight('someRowID', true);" onmouseout="highlight('someRowID', false);" id="someRowID" All is fine and dandy, the "highlight" function fires and actually sets the appropriate class. It's just that IE won't process the CSS class name change. Here is a snippet of the CSS I am using to make the change. .HighlightOn { cursor:pointer; background-color: #D1DFFF; } .HighlightOff { background-color: #E1EEFE; } I can see that the Class names are getting updated when I debug it, and also check it in Firebug. But it seems that IE doesn't like this usage of classes with a TR tag.. Is it the way I am structuring the class for Tables ? Any advice ?

  Read the article

• (solved) jQuery click and drag/scroll window: jagged movement

  - by Josh

  Edit: derp, using pageX/Y instead of clientX/Y -- apparently scrollBy expects input with that offset rather than the other. Jaggy movement gone. I am getting jagged movement when doing small scroll increments using the following bindings. Can anyone point me in the right direction for how to smooth this out? FYI, its intermittent. It seems like, if I click and hold for a second, then drag at a decent speed there are no problems. Edit: What the hell? I get this output on debug... obvious jog backwards and forwards. This will happen in succession and seems to have no correlation with the mouse, other than the mouse is moving. x 398 : 403 y 374 : 377 x 403 : 399 y 377 : 374 x 399 : 404 y 374 : 377 Josh sococo.client.panMap = function(e){ e.preventDefault(); var movex = sococo.client.currX - e.pageX ; var movey = sococo.client.currY - e.pageY; console.log( sococo.client.currX +" : " + e.pageX ); window.scrollBy(movex,movey); sococo.client.currY = e.pageY; sococo.client.currX = e.pageX; } $(document).mousedown( function(e){ e.preventDefault(); sococo.client.currX = e.pageX; sococo.client.currY = e.pageY; $(document).bind( "mousemove", sococo.client.panMap ); }); $(document).mouseup( function(e){ e.preventDefault(); $(document).unbind( "mousemove", sococo.client.panMap ); });

  Read the article

• errors when using c++ bison ---- in the file position.hh

  - by Eric

  firstly I'm not good at English so forgive me. I compile my program with the bison generated files in visual studio and get these errors: ...\position.hh(83): error C2589: '(' : illegal token on right side of '::' ...\position.hh(83): error C2059: syntax error : '::' ...\position.hh(83): error C2589: '(' : illegal token on right side of '::' ...\position.hh(83): error C2059: syntax error : '::' and the corresponding code is: inline void columns (int count = 1) { column = std::max (1u, column + count); } I think the problem is with std::max. If I change std::max to equivalent code then there is problem anymore, but is there a better solution instead of changing the generated code? here is the *.yy file I wrote. // // bison.yy // %skeleton "lalr1.cc" %require "2.4.2" %defines %define parser_class_name "cmd_parser" %locations %debug %error-verbose %code requires { class ParserDriver; } %parse-param { ParserDriver& driver } %lex-param { ParserDriver& driver } %union { struct ast *a; double d; struct symbol *s; struct symlist *sl; int fn; } %code { #include "helper_func.h" #include "ParserDriver.h" std::string error_msg = ""; } %token <d> NUMBER %token <s> NAME %token <fn> FUNC %token EOL %token IF THEN ELSE WHILE DO LET %token SYM_TABLE_OVERFLOW %token UNKNOWN_CHARACTER %nonassoc <fn> CMP %right '=' %left '+' '-' %left '*' '/' %nonassoc '|' UMINUS %type <a> exp stmt list explist %type <sl> symlist %{ extern int yylex(yy::cmd_parser::semantic_type *yylval, yy::cmd_parser::location_type* yylloc); %} %start calclist %% ... grammar rules ...

  Read the article

• Multicore solr on Ubuntu 10.04 working for anyone?

  - by coleifer

  Following instructions from the two sites below, I've installed tomcat6 and solr 1.4 http://gist.github.com/204638 https://wiki.fourkitchens.com/display/TECH/Solr+1.4+on+Ubuntu+9.10+and+CentOS+5 I have successfully got it up and running on a server running 9.04 with multicore support, but on the 10.04 I can't seem to get it to work. I am able to reach localhost:xxxx/solr/ on the 10.04 box and see a single link to the Solr Admin, but following the link takes me to a 404 page with the following output: /solr/admin/ HTTP Status 404 - missing core name in path The requested resource (missing core name in path) is not available I am also unable to access /solr/site1/ as I would except - it similarly returns a 404 <!-- from /var/solr/solr.xml, site dirs exist --> <cores adminPath="/admin/cores"> <core name="site1" instanceDir="site1" /> <core name="site2" instanceDir="site2" /> </cores> <!-- from /etc/tomcat6/Catalina/localhost/solr.xml --> <Context docBase="/var/solr/solr.war" debug="0" privileged="true" allowLinking="true" crossContext="true"> <Environment name="solr/home" type="java.lang.String" value="/var/solr" override="true" /> </Context>

  Read the article

• Calling ASP.NET Web API using JQuery ajax - cross site scripting issue

  - by SimonF

  I have a Web API which I am calling using the JQuery ajax function. When I test the service directly (using the Chrome RESTEasy extension) it works fine, however when I call it using the JQuery ajax function I get an error. I'm calling it on port 81: $.ajax({ url: "http://127.0.0.1:81/api/people", data: JSON.stringify(personToCreate), type: "POST", contentType: "application/json;charset=utf-8", statusCode: { 201: function (newPerson) { callback(newPerson); } }, success: function (newPerson) { alert("New person created with an Id of " + newPerson.Id); }, error: function (jqXHR, textStatus, errorThrown) { alert('Error. '+textStatus+'. '+errorThrown); } }); ...but when I trace it using FireBug Lite the response comes from port 82: {"Message":"No HTTP resource was found that matches the request URI 'http://127.0.0.1:82/api/people'.","MessageDetail":"No action was found on the controller 'People' that matches the request."} I think the error is, effectively, due to cross-site scripting being blocked, but I'm not actually cross-site scripting, if you see what I mean. Has anyone else come across this and been able to fix it? Edit: Routing config (global.asax.vb) is: RouteTable.Routes.MapHttpRoute(name:="DefaultApi", routeTemplate:="api/{controller}/{id}", defaults:=New With {Key .id = System.Web.Http.RouteParameter.Optional}) Controller: Public Function PostValue(ByVal departmentid As Integer, ByVal emailaddress As String, ByVal firstname As String, ByVal lastname As String) As Guid Dim context As New WSMModelDataContext Dim bllPeople As New PeopleBLL(context) Return bllPeople.Create(firstname, lastname, emailaddress, departmentid) End Function When I debug it, it doesn't get as far as running the controller, although when calling it through RESTEasy it routes correctly and the controller executes successfully. The only difference seemes to be that wen called through RESTEasy it is (correctly) using http://127.0.0.1:81 but for some reason when called via JQuery/ajax it seems to be using http://127.0.0.1:82.

  Read the article

• Why are changes to coffeescript files not being compiled when my Rails 3.2.0 app is in development mode?

  - by ben

  Normally, any changes I make to .js.coffee files in my Rails 3.2.0 app in development mode take effect when I refresh the page. All of a sudden, this is not happening. If I do rake assets:precompile, then the changes are shown, but then if I do rake assets:clean they go back to not being shown. What is causing this? Edit: Restarting the server makes the changes show. Why isn't this happening automatically as before? Edit: Here is my development.rb Myapp::Application.configure do # Settings specified here will take precedence over those in config/application.rb # In the development environment your application's code is reloaded on # every request. This slows down response time but is perfect for development # since you don't have to restart the web server when you make code changes. config.cache_classes = false # Log error messages when you accidentally call methods on nil. config.whiny_nils = true # Show full error reports and disable caching config.consider_all_requests_local = true config.action_controller.perform_caching = false # Don't care if the mailer can't send config.action_mailer.raise_delivery_errors = false # Print deprecation notices to the Rails logger config.active_support.deprecation = :log # Only use best-standards-support built into browsers config.action_dispatch.best_standards_support = :builtin # Raise exception on mass assignment protection for Active Record models config.active_record.mass_assignment_sanitizer = :strict # Log the query plan for queries taking more than this (works # with SQLite, MySQL, and PostgreSQL) config.active_record.auto_explain_threshold_in_seconds = 0.5 # Do not compress assets config.assets.compress = false # Expands the lines which load the assets config.assets.debug = true config.action_mailer.default_url_options = { :host => 'localhost:3000' } config.log_level = :warn end

  Read the article

• Static variables and long running thread on IIS 7.5

  - by Dmitry

  Hello people. Help me solve next problem. I have ASP .NET MVC2 application. I run it on IIS 7.5. In one page user clicks button and handler for this button sends request to server (jquery.ajax). At server action in controller starts new thread (it makes long time import): var thread = new Thread(RefreshCitiesInDatabase); thread.Start(); State of import is available in static variable. New thread changes value of variable in the begin of work. User can check state of import too with the help of this variable, which is used in view. And user sees import's state. When I start this function few minutes everything is okey. On page I see right state of import, quantity of imported records is changed, I see changes in logs. But after few minutes begin troubles. When I refresh page with import state sometimes I see that import is okey but sometimes I see page with default values about import (like application is just started), but after that again I can see page with normal import's state. I tried to attach Visual Studio to IIS process and debug application. But when request comes to controller sometimes static variables have right values and sometimes they have default values (static int has 0, static string has "" etc.). Tell me what I do wrong. May be I must start additional thread in other way? Thanks in advance, Dmitry

  Read the article

• Mocking Autofac's "Resolve" extension method with TypeMock

  - by Lockshopr

  I'm trying to mock an Autofac resolve, such as: using System; using Autofac; using TypeMock.ArrangeActAssert; class Program { static void Main(string[] args) { var inst = Isolate.Fake.Instance<IContainer>(); Isolate.Fake.StaticMethods(typeof(ResolutionExtensions), Members.ReturnNulls); Isolate.WhenCalled(() => inst.Resolve<IRubber>()).WillReturn(new BubbleGum()); Console.Out.WriteLine(inst.Resolve<IRubber>()); } } public interface IRubber {} public class BubbleGum : IRubber {} Coming from Moq, the syntax and exceptions from TypeMock confuse me a great deal. Having initially run this in a TestMethod, I kept getting an exception resembling "WhenCalled cannot be run without a complementing behavior". I tried defining behaviors for everyone and their mothers, but to no avail. Then I debug stepped through the test run, and saw that an actual exception was fired from Autofac: IRubber has not been registered. So it's obvious that the static Resolve function isn't being faked, and I can't get it to be faked, no matter how I go about hooking it up. Isolate.WhenCalled(() => ResolutionExtensions.Resolve<IRubber>(null)).WillReturn(new BubbleGum()); ... throws an exception from Autofac complaining that the IComponentContext cannot be null. Feeding it the presumably faked IContainer (or faking an IComponentContext instead) gets me back to the "IRubber not registered" error.

  Read the article

• Database version is zero on initial install

  - by mahesh

  I have released an app (World Time) with initial database. Now i want to update the app with a database upgrade. I have put in the upgrade code in OnUpgrade() and checking for the newVersion. But it was not being called in my local testing... So i put in the debug statement to get the database version and it is zero . Any idea why it is not being versioned ? Following is the code to copy the database from my Assets folder ... InputStream myInput = myContext.getAssets().open(DB_NAME); // Path to the just created empty db String outFileName = DB_PATH + DB_NAME; //Open the empty db as the output stream OutputStream myOutput = new FileOutputStream(outFileName); //transfer bytes from the inputfile to the outputfile byte[] buffer = new byte[1024]; int length; while ((length = myInput.read(buffer))>0){ myOutput.write(buffer, 0, length); } //Close the streams myOutput.flush(); myOutput.close(); myInput.close(); -- Mahesh http://android.maheshdixit.com

  Read the article

• Will IntelliTrace(tm) (historical debugging) be available for unmanaged c++ in future versions of Vi

  - by Tim

  I love the idea of historical debugging in VS 2010. However, I am really disappointed that unmanaged C++ is left out. IntelliTrace supports debugging Visual Basic and C# applications that use .NET version 2.0, 3.0, 3.5, or 4. You can debug most applications, including applications that were created by using ASP.NET, Windows Forms, WPF, Windows Workflow, and WCF. IntelliTrace does not support debugging C++, script, or other languages. Debugging of F# applications is supported on an experimental basis. (editorial) [This is really poor support in my opinion. .NET is less in need of this assistance than unmanaged c++. I an getting a little tired of the status of plain old C++ and its second-class status in the MS tools world. Yes, I realize it is probably WAAY easier to implement this with .NET and MS are pushing .NET as the future, and yes, I know that C++ is an "old" language, but that does not diminish the fact that there are lots of C++ apps out there and there will continue to be more apps built with C++. I sincerely hope MS has not dropped C++ as a supported developer tool/language- that would be a shame.] Does anyone know if there are plans for it to support C++?

  Read the article

• .NET regex: Match.nextMatch() never returns

  - by Jimmy

  I have a regex that seems to have worked fine for the past year or so, and all of a sudden today with a new slightly different text to match against, Match.nextMatch() never returns. I'm no regex expert and I'm sure the regex can be optimized, but previous data sets weren't much more complex than what I've tried today. Furthermore, the regex works fine against the offending data set in a tool like RegexBuddy; it's only in .net (running in debug in Visual Studio) that it seems to hang. Nevertheless, if anyone can figure out how to tweak the regex to make it work, I'd really appreciate it. This is the regex: <tr>(<td[^>]*><a[^>]*>(?<callOptionTicker>[A-Z]{1,5}\d{6}C\d{8})</a></td>)(<td[^>]*>.*?</td>){6}(<td[^>]*><b><a[^>]*>(?<strikePrice>\d*\.\d*)</a></b></td>)(<td[^>]*><a[^>]*>(?<putOptionTicker>[A-Z]{1,5}\d{6}P\d{8})</a></td>) It's meant to extract put and call option tickers from a Yahoo option chain page (i.e., raw HTML). It works fine for IBM http://finance.yahoo.com/q/os?s=IBM&m=2010-05-21 It doesn't work for SPX options (this is the offending data set) http://finance.yahoo.com/q/os?s=I:SPX.W&m=2010-05

  Read the article

• printf and Console.WriteLine - problems with Console.SetOut?

  - by Matt Jacobsen

  i have a bunch of Console.WriteLines in my code that I can observe at runtime. I communicate with a native library that I also wrote. I'd like to stick some printf's in the native library and observe them too. I don't see them at runtime however. I've created a convoluted hello world app to demonstrate my problem. When the app runs, I can debug into the native library and see that the hello world is called. The output never lands in the textwriter though. Note that if the same code is run as a console app then everything works fine. C#: [DllImport("native.dll")] static extern void Test(); StreamWriter writer; public Form1() { InitializeComponent(); writer = new StreamWriter(@"c:\output.txt"); writer.AutoFlush = true; System.Console.SetOut(writer); } private void button1_Click(object sender, EventArgs e) { Test(); } and the native part: __declspec(dllexport) void Test() { printf("Hello World"); } Despite my earlier ramblings (see edits) I actually think this is a problem in C# (or rather my understanding of it).

  Read the article

• GetEffectiveRightsFromAcl throws invalid acl error

  - by apoorv020

  I am trying to get the effective rights a user has on a file using interop in C#. Following is the code I am using : public static FileSystemRights GetFileEffectiveRights(string FileName, string UserName) { IntPtr pDacl, pZero = IntPtr.Zero; int Mask = 0; uint errorReturn = GetNamedSecurityInfo(FileName, SE_OBJECT_TYPE.SE_FILE_OBJECT, SECURITY_INFORMATION.Dacl , out pZero, out pZero, out pDacl, out pZero, out pZero); if (errorReturn != 0) { throw new Exception("Win error : " + errorReturn); } Program.TRUSTEE pTrustee = new TRUSTEE(); pTrustee.pMultipleTrustee = IntPtr.Zero; pTrustee.MultipleTrusteeOperation = (int)Program.MULTIPLE_TRUSTEE_OPERATION.NO_MULTIPLE_TRUSTEE; pTrustee.ptstrName = UserName; pTrustee.TrusteeForm = (int)Program.TRUSTEE_FORM.TRUSTEE_IS_NAME; pTrustee.TrusteeType = (int)Program.TRUSTEE_TYPE.TRUSTEE_IS_USER; errorReturn = GetEffectiveRightsFromAcl(pDacl, ref pTrustee, ref Mask); if (errorReturn != 0) { throw new Exception("Win error : " + errorReturn); } return (FileSystemRights)Mask; } This code works fine until I start modifying the ACL structure using the classes FileAccessRule and FileInfo, and then I start getting Windows Error 1336 : ERROR_INVALID_ACL. Same is the case if I debug the process call GetFileEffectiveRights once, pause the process,change the ACL through windows API, and resume and call GetFileEffectiveRights again(the 1st call succeeds but the second gives 1336.) What is going wrong?

  Read the article

• Two different seeds producing the same "random" sequence

  - by Ruud Lenders

  Maybe there is a very logic explanation for this, but I just can't seem to understand why the seeds 0 and 2,147,483,647 produce the same "random" sequence, using .NET's Random Class (System). Quick code example: ushort len = 8; Random r0 = new Random(0), r1 = new Random(1), r2 = new Random(int.MaxValue); //2,147,483,647 byte[] b0 = new byte[len], b1 = new byte[len], b2 = new byte[len]; r0.NextBytes(b0); r1.NextBytes(b1); r2.NextBytes(b2); for (int i = 0; i < len; i++) { System.Diagnostics.Debug.WriteLine("{0}\t\t{1}\t\t{2}", b0[i], b1[i], b2[i]); } Console.ReadLine(); Output: 26 70 26 12 208 12 70 134 76 111 130 111 93 64 93 117 151 115 228 228 228 216 163 216 As you can see, the first and the third sequence are the same. Can someone please explain this to me?

  Read the article

• Dll Import : Unable to find Entry Point "fnMultiply" in DLL "ImportDLL"

  - by user662285

  I am trying to use DLLImport for using Win32 dll method in C#. Win32 dll C++ // .h file #ifdef IMPORTDLL_EXPORTS #define IMPORTDLL_API __declspec(dllexport) #else #define IMPORTDLL_API __declspec(dllimport) #endif // This class is exported from the ImportDLL.dll class IMPORTDLL_API CImportDLL { public: CImportDLL(void); // TODO: add your methods here. int Add(int a , int b); }; extern IMPORTDLL_API int nImportDLL; IMPORTDLL_API int fnImportDLL(void); IMPORTDLL_API int fnMultiply(int a,int b); // .cpp file // ImportDLL.cpp : Defines the exported functions for the DLL application. // #include "stdafx.h" #include "ImportDLL.h" // This is an example of an exported variable IMPORTDLL_API int nImportDLL=0; // This is an example of an exported function. IMPORTDLL_API int fnImportDLL(void) { return 42; } IMPORTDLL_API int fnMultiply(int a , int b) { return (a*b); } Once i build this i get ImportDLL.dll Now i create Windows Application and add this dll in debug folder and try to use this method using DLLImport [DllImport("ImportDLL.dll")] public static extern int fnMultiply(int a, int b); And I try to call this in C# int a = fnMultiply(5, 6); // This line gives error Unable to find an entry point Can any body tell what i am missing? Thanks.

  Read the article

• C# DllImport with c++ const char* not working correctly

  - by Shammah

  I have the following function in a C++ DLL extern "C" __declspec(dllexport) bool Exist(const char* name) { //if (g_Queues.find(name) != g_Queues.end()) // return true; //else // return false; return false; } Inside my C# class I have the following: [DllImport("Whisper.dll", EntryPoint="Exist", CallingConvention=CallingConvention.Cdecl)] public static extern bool Exist(string name); Yet, whenever I call my function it ALWAYS returns true, even when I commented out my little function and made it return false. I have the feeling there is something wrong with my calling convention or any other issue with P/Invoking my DLL, probably corresponding with the string and const char*, but for now I am completely clueless. What am I doing wrong? Why does it return true instead of false? EDIT: I have figured out this has nothing to do with the const char* or string, because the problem persists with an empty function. I've tried changing the calling convention between Cdecl and StdCall and neither work correctly. I've also managed to debug my DLL and it's being called correctly and does indeed return false, but once back into C# it somehow is true. Changing the CharSet also had no effect. I've made sure I've supplied my C# program with the latest and correct version of my DLL each time, so that shouldn't be an issue aswell. Again, I am completely clueless on why the result is true when I'm in fact returning false. EDIT2: SOReader provided me with a suggestion which fixes another important issue, see my comment. Sadly, it does not fix the return issue.

  Read the article

• WMI Query Script as a Job

  - by Kenneth

  I have two scripts. One calls the other with a list of servers as parameters. The second query is designed to execute a WMI query. When I run it manually, it does this perfectly. When I try to run it as a job it hangs forever and I have to remove it. For the sake of space here is the relevant part of the calling script: ProcessServers.ps1 Start-Job -FilePath .\GetServerDetailsLight.ps1 -ArgumentList $sqlsrv,$destdb,$server,$instance GetServerDetailsLight.ps1 param($sqlsrv,$destdb,$server,$instance) $password = get-content C:\SQLPS\auth.txt | convertto-securestring $credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist "DOMAIN\MYUSER",$password [System.Reflection.Assembly]::LoadWithPartialName('Microsoft.SqlServer.SMO') $box_id = 0; if ($sqlsrv.length -eq 0) { write-output "No data passed" break } function getinfo { param( [string]$svr, [string]$inst ) "Entered GetInfo with: $svr,$inst" $cs = get-wmiobject win32_operatingsystem -computername $svr -credential $credentials -authentication 6 -Verbose -Debug | select Name, Model, Manufacturer, Description, DNSHostName, Domain, DomainRole, PartOfDomain, NumberOfProcessors, SystemType, TotalPhysicalMemory, UserName, Workgroup write-output "WMI Results: $cs" } getinfo $server $instance write-output "Complete" Executed as a job it will show as 'running' forever: PS C:\sqlps> Start-Job -FilePath .\GetServerDetailsLight.ps1 -ArgumentList DBSERVER,LOGDB,SERVER01,SERVER01 Id Name State HasMoreData Location Command -- ---- ----- ----------- -------- ------- 21 Job21 Running True localhost param($sqlsrv,$destdb,... GAC Version Location --- ------- -------- True v2.0.50727 C:\WINDOWS\assembly\GAC_MSIL\Microsoft.SqlServer.Smo\10.0.0.0__89845dcd8080cc91\Microsoft.SqlServer.Smo.dll getinfo MSDCHR01 MSDCHR01 Entered GetInfo with: SERVER01,SERVER01 The last output I ever get is the 'Entered GetInfo with: SERVER01,SERVER01'. If I run it manually like so: PS C:\sqlps> .\GetServerDetailsLight.ps1 DBSERVER LOGDB SERVER01 SERVER01 The WMI query executes just as expected. I am trying to determine why this is, or at least a useful way to trap errors from within jobs. Thanks!

  Read the article

• MS Access form_current() firing multiple times

  - by Eric G

  I have a form with two subforms (on separate tab pages). It's an MDB project in Access 2003. When it initially opens, Form_Current on the active subform fires once, as it should. But when you move to another record (ie. from the main form), it fires Form_Current on the active subform 4 times. Then subsequent record-moves result in Form_Current firing 2 times. This is a pain, because the subforms have a lot of fields that get moved and/or hidden and so it jumps around for every Form_Current, not to mention being slow. I am opening the form with a filter via DoCmd.OpenForm (actually it sends the filter in via OpenArgs). FilterOn is only set once, in Form_Open on the main form, never in the subforms. Form_Current is not called explicitly anywhere else in the code. When I look at the call stack when Form_Current fires moving the first time, it looks like: my_subform.Form_Current [<Debug Window>] my_subform.Form_Current So it seems like something in Form_Current is triggering another Form_Current event. But only on the first record move. The code in Form_Current is somewhat complex, involving custom classes and event callbacks, but generally does not touch the table data. The only thing I can think might be triggering a Form_Current is that it checks OldValue on form controls - could this be causing it? Or anything else come to mind? Thanks. Eric

  Read the article

• Encoding h.264 with libavcodec/x264

  - by Leviathan

  I am attempting to encode video using libavcodec/libavformat. I'm trying to change the standard output-example.c from ffmpeg source. The AVI file is created on the disk, but the only sound is encoded. I tried adding a lot of options for x264 from here. All the other codecs works fine, mpeg2, mpeg4, mjpeg, xvid. In addition to specifying the parameters x264, I also set the codec to AVOutputFormat structure. That's all I've done. AVOutputFormat *pOutFormat; // in header file av_register_all(); AVCodec *codec = avcodec_find_encoder_by_name("libx264"); pOutFormat = guess_format("avi", NULL, NULL); pOutFormat->video_codec = codec->id; The debug output of my application: Output #0, mp4, to 'D:\1.avi': Stream #0.0: Video: libx264, yuv420p, 320x240, q=10-51, 500 kb/s, 90k tbn, 25 tbc Stream #0.1: Audio: aac, 44100 Hz, 1 channels, s16, 128 kb/s [libx264 @ 0x694010]using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x694010]bitrate tolerance too small, using .01 [libx264 @ 0x694010]profile Main, level 2.0 [libx264 @ 0x694010]frame I:150 Avg QP:14.76 size: 2534 [libx264 @ 0x694010]mb I I16..4: 75.9% 0.0% 24.1% [libx264 @ 0x694010]final ratefactor: 17.57 [libx264 @ 0x694010]coded y,uvDC,uvAC intra: 42.7% 92.4% 47.4% [libx264 @ 0x694010]i16 v,h,dc,p: 11% 14% 2% 73% [libx264 @ 0x694010]i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 21% 18% 29% 5% 8% 10% 3% 3% 2% [libx264 @ 0x694010]kb/s:506.79

  Read the article

• WPF XAML references not resolved via myAssembly.GetReferencedAssemblies()

  - by WPF-it

  I have a WPF container application (with ContentControl host) and a containee application (UserControl). Both are oblivious of each other. Only one XML config file holds the string dllpath of the containee's DLL and full namespace name of the ViewModelClass inside the containee. A generic code in container resolves containee's assembly (Assembly.LoadFrom(dllpath)) and creates the viewmodel's instance using Activator.CreateInstance(vmType). when this viewmodel is hosted inside the ContentControl of the container, and relevant vierwmodel specific ResourceDictionary is added to ContentControl.Resources.MergedDictionaries of the content control of container, so the view loads fine. Now my containee has to host the WPF DataGrid using assembly reference of WPFToolkit.dll from my local C:\Lib folder. The Copy Local reference to the WPFToolkit.dll is added to the .csproj file of the containee's project and its only referred in the UserControl.XAML using its XAML namepsace. This way my bin\debug folder in my containee application, gets the WPFToolkit.dll copied. XAML: xmlns:Controls="clr-namespace:Microsoft.Windows.Controls;assembly=WPFToolkit" <Controls:DataGrid ItemsSource="{Binding AssetList}" ... /> Issue: The moment the ViewModel (i.e. the containee's usercontrol) tries to load itself I get this error. "Cannot find type 'Microsoft.Windows.Controls.DataGrid'. The assembly used when compiling might be different than that used when loading and the type is missing." Hence I tried to load the referenced assemblies of the containee's assembly (myAssembly.GetReferencedAssemblies()) before the viewmodel is hosted. But WPFToolkit isnt there in that list of assemblies! Strange thing is I have another dll referred called Logger.dll in the containee codebase but this one is implemented using C# code behind. So I get its reference correctly resolved in myAssembly.GetReferencedAssemblies(). So does that mean BAML references of assemblies are never resolvable by GetReferencedAssemblies?

  Read the article

• using jquery growl with php/mysql

  - by jeansymolanza

  on my database i am planning to create a table storing messages to alert users of anything they need to do. i am looking at using a jQuery growl like notification method but im confused at how i would begin building it. the data would be added into the database using the standard MYSQL insert method from a form but how would i select messages from the database to display using the jQuery growl. would this require the use of ajax? this is the javascript code i have so far, i was wondering how i would implement the php code alongside it so that i can pull out data from my tables to display as notifications: <script type="text/javascript"> // In case you don't have firebug... if (!window.console || !console.firebug) { var names = ["log", "debug", "info", "warn", "error", "assert", "dir", "dirxml", "group", "groupEnd", "time", "timeEnd", "count", "trace", "profile", "profileEnd"]; window.console = {}; for (var i = 0; i < names.length; ++i) window.console[names[i]] = function() {}; } (function($){ $(document).ready(function(){ // This specifies how many messages can be pooled out at any given time. // If there are more notifications raised then the pool, the others are // placed into queue and rendered after the other have disapeared. $.jGrowl.defaults.pool = 5; var i = 1; var y = 1; setInterval( function() { if ( i < 3 ) { $.jGrowl("Message " + i, { sticky: true, log: function() { console.log("Creating message " + i + "..."); }, beforeOpen: function() { console.log("Rendering message " + y + "..."); y++; } }); } i++; } , 1000 ); }); })(jQuery); </script> <p> thanking you in advance and God bless

  Read the article

• UICollectionView with one static cell and N dynamic ones from a fetchresultscontroller exception

  - by nflacco

  I'm trying to make a UITableView that shows a blog post and comments for that post. My setup is a tableview in storyboard with two dynamic prototype cells. The first cell is for the post and should never change. The second cell represents the 0 to N comments. My cellForRowAtIndexPath method shows the post cell properly, but fails to get the comment at the given index path (though if I comment out the fetch I get the appropriate number of comment cells with a green background that I set as a visual debug thing). let comment = fetchedResultController.objectAtIndexPath(indexPath) as Comment I get the following exception on this line: 2014-08-24 15:06:40.712 MessagePosting[21767:3266409] *** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[__NSArrayM objectAtIndex:]: index 1 beyond bounds [0 .. 0]' *** First throw call stack: ( 0 CoreFoundation 0x0000000101aa43e5 __exceptionPreprocess + 165 1 libobjc.A.dylib 0x00000001037f9967 objc_exception_throw + 45 2 CoreFoundation 0x000000010198f4c3 -[__NSArrayM objectAtIndex:] + 227 3 CoreData 0x00000001016e4792 -[NSFetchedResultsController objectAtIndexPath:] + 162 Section and cell setup: override func tableView(tableView: UITableView!, numberOfRowsInSection section: Int) -> Int { // #warning Incomplete method implementation. // Return the number of rows in the section. switch section { case 0: return 1 default: if let realPost:Post = post { return fetchedResultController.sections[0].numberOfObjects } else { return 0 } } } override func tableView(tableView: UITableView!, cellForRowAtIndexPath indexPath: NSIndexPath!) -> UITableViewCell! { switch indexPath.section { case 0: let cell = tableView.dequeueReusableCellWithIdentifier(postViewCellIdentifier, forIndexPath: indexPath) as UITableViewCell cell.backgroundColor = lightGrey if let realPost:Post = self.post { cell.textLabel.text = realPost.text } return cell default: let cell = tableView.dequeueReusableCellWithIdentifier(commentCellIdentifier, forIndexPath: indexPath) as UITableViewCell cell.backgroundColor = UIColor.greenColor() let comment = fetchedResultController.objectAtIndexPath(indexPath) as Comment // <---------------------------- :( cell.textLabel.text = comment.text return cell } } FRC: func controllerDidChangeContent(controller: NSFetchedResultsController!) { tableView.reloadData() } func getFetchedResultController() -> NSFetchedResultsController { fetchedResultController = NSFetchedResultsController(fetchRequest: taskFetchRequest(), managedObjectContext: managedObjectContext, sectionNameKeyPath: nil, cacheName: nil) return fetchedResultController } func taskFetchRequest() -> NSFetchRequest { if let realPost:Post = self.post { let fetchRequest = NSFetchRequest(entityName: "Comment") let sortDescriptor = NSSortDescriptor(key: "date", ascending: false) fetchRequest.predicate = NSPredicate(format: "post = %@", realPost) fetchRequest.sortDescriptors = [sortDescriptor] return fetchRequest } else { return NSFetchRequest(entityName: "") } }

  Read the article

• Debugging Django project problem.

  - by Wasim

  Hi all, I asked this question before, but had no replies, maybe I wasn't so clear. I'm trying to debug a django project using MySQL database. If I run the admin or trying to use the shell to communicate to the data base every thing is well and I can do every thing. I installed MySQLdb for Python 2.6. I installed PyDev on my Apatana studio. Configured the Debugging with runserver 8001 --noreload. When I start debugging , When I arrive to the following code in C:\Python26\Lib\site-packages\django\db\backends\mysql\base.py try: import MySQLdb as Database except ImportError, e: from django.core.exceptions import ImproperlyConfigured raise ImproperlyConfigured("Error loading MySQLdb module: %s" % e) I get an import error : django.core.exceptions.ImproperlyConfigured: Error loading MySQLdb module: DLL load failed: The specified module could not be found. I trying to ge more deeply with the import MySQLdb as Database line , it goes to the C:\Python26\Lib\site-packages\MySQLdb__init__.py and fail in the line import _mysql. I can't understand the problem. When running the Django admin every thing is ok, but with debugging it fails to work. Any help please. Thanks in advance.

  Read the article

< Previous Page | 701 702 703 704 705 706 707 708 709 710 711 712  | Next Page >