Search Results

Search found 28582 results on 1144 pages for 'message loop'.

Page 705/1144 | < Previous Page | 701 702 703 704 705 706 707 708 709 710 711 712  | Next Page >

• IBM Server searching for secondary server

  - by user1241438

  I just bought the following server IBM System x3950 Server, 4 x 3.0GHz Dual Core, 32GB, 6 x 73.4GB 10K SAS RAID, 256MB BBWC, 2x Power, CD-RW/DVD When i boot it up, it says "Searching for secondary server" and hangs their for almost 10 mins. After 10 mins, it says timeout on searching chassis 2. But after this it proceed to boot the OS properly. But my frustration, i need to wait for almost 15 mins to boot everytime. How do i prevent this error message.

  Read the article

• Grub problem - Command prompt

  - by RhZ

  Update: Thanks to all who helped. I gave up and am going to re-install. Not the end of the world, no files will be lost :-) This time will be backing up grub haha. Thanks again, I really appreciate the community's help on this. I was going along fine when the new pae kernel came down, and it had some bug where the sound was all messed up. So I used startup manager to choose the older pae kernel and rebooted. But startupmanager must have fuXXored my grub. When I re-booted, I get thrown directly into memtest and thats it. I tried to re-install grub using the live disc method that I found in many places. That changed something so I get a prompt and the message: "GNU grub version 1.99 ubuntu. Minimal BASH-like editing is supported. Type help for complete list." But then I tried the live CD fix again and now am back at the memtest... What can I do to get my system running again? UPDATE: Just to be clear,when I start up I get a blinking cursor in the top left, and the word 'ON' in the middle of the screen. Then, after a good minute or two, the memtest starts.

  Read the article

• Point an external domain to a shared hosting website

  - by dailgez004

  I bought a domain from a seller (GoDaddy), and wish to point it at a shared hosting website (ASmallOrange). Googling tells me it's fairly straightforward: Step 1: On the external domain's DNS, configure two NS records for the two nameservers of the hosting service. Step 2: Wait 2-48 hours. I'm puzzled because it can't be that simple. I've told the DNS where to look, but since it's shared hosting, the hosting service needs to know what site to point the domain to. And indeed, after I've performed the above steps, visiting the domain leads me to a generic message from the shared hosting service. Okay, so I have to configure the DNS on the hosting service, right? The service I use (ASmallOrange) uses cPanel. What I tried is to set up a Parked Domain for the externally bought domain; when I go into the Advanced DNS Zone Editor, sure enough, the DNS for the external domain shows up as something I can configure. Yet, visiting the externally registered domain still points me to the generic shared server page. I'm convinced I'm doing something wrong. Could someone debug my thought process? Or perhaps offer alternate solutions? Right now, I'm considering trying to set up a CNAME record on the external domain to point to the domain I registered through the shared host -- but I have a vague impression that this is bad practice.

  Read the article

• HTC Android Messages - adding contact from SMS

  - by Chris

  I'm not sure if this problem is specific to Android, HTC or Sense UI; apologies! Phone: T-Mobile G2 aka HTC Hero OS: Android 1.5 App: Messages Scenario: I receive a text from someone not in my Contacts, so just have their number. I want to add them as a new contact. Problem: I can't (click on the number and I can call them; long press on the message and I can add to an exist contact). Is there any way I can add a new contact simply?

  Read the article

• Private Git repo using Smart HTTP with LDAP authentification

  - by ALOToverflow

  I've been crawling the interwebz and getting my hands dirty for the last few days, but I can't seem to make it all work together. I managed to get a HTTP repo working with Ubuntu 10.04 over Smart HTTP (pull and push over HTTP) for a single repo. This means that I do the initial setup over SSH to the server (git init --bare) and after that the clients can pull and push to it (git clone http://servername/allgitrepos/repo.git). Unfortunately it's impossible to add a new repo without SSHing to the server and adding it manually) i.e. git push http://servername/allgitrepos/repo2.git (allgitrepos is available for everyone to read-write and execute) would fail talking about git update-server-info (which seems to be a general error message). So far the repository is anonymous, so I would like to authenticate using LDAP and also use the LDAP creds to make the git commit. So, how can I push new repos to the server and how can I use the LDAP creds to make the git commit. Thanks

  Read the article

• LAMP setup - phpmyadmin says the mysqli extension is missing (but its listed in phpinfo)

  - by WebweaverD

  I regularly set up virtualbox ubuntu setups to run as local webservers. I have set these up several times and never had an issue. Recently I have been cloning them but wanted to do a fresh install this time in the hopes of fixing some niggling problems which have propagated through my setups. However, something has changed: 1)vb guest additions no longer allow me to copy and paste (i'll worry about that later) 2)more importantly phpmyadmin no longer works as installed - Initially going to localhost/phpmyadmin gave a message that the page could not be found. So I have followed some instructions (sorry I know its vague I cant find them now) which have created a phpmyadmin directory in /var/www but now I get an error saying: the mysqli extension is missing. If I run phpinfo mysql and mysqli are listed. All I have done so far is install apache2 (working) install php5 (which I think used to come with apache) Install mysql server (and client for good measure) and install phpmyadmin I found a post of a similar question which suggested I should install php5-mysql (done) and edit php.ini and uncomment the line extension-mysqli.so - this is not there, so I tried adding it with no joy. I have restarted apache and still no joy on phpmyadmin. Any help is much appreciated as this is driving me nuts. Why the change for the worse - I was just starting to like linux! I'm running a windows 7 machine and the guest os is ubuntu 12.04 - I ran apt-get update before doing anything so all packages should be the latest versions.

  Read the article

• how install minimum domain email piping to script in centos?

  - by Adam Ramadhan

  hello i have search google on a simple tutorial on how to make a piping email. first how does really email technically work? "stmp is a process that binds to 25, waiting for email request that goes in from another stmp process(in another server) determined by the domain MX route that will send the message to port 25 if any email goes though the MX.domain.tld" that is in a nutshell how emailing work, am i right? or there is something wrong here? second, so if im right, we need to set a SMTP server so we can receive incoming emails from MX SMTP route right? ive googled though google and found two best STMP servers from my opinion, they are EXIM and POSTFIX, can anybody give us a simple tutorial installing and setting up an email piping for a fresh installed linux/centos? example *.domain.tld -> allinonepipe.php thanks.

  Read the article

• Sendmail problem

  - by trobrock

  I am trying to get my server to be able to send email from PHP. Currently it is using send mail, but whenever I try to send mail to a gmail address I get this sort of response: --o54Mqd5s008981.1275691959/ServerName Content-Type: message/delivery-status Reporting-MTA: dns; ServerName Received-From-MTA: DNS; localhost Arrival-Date: Fri, 4 Jun 2010 22:52:38 GMT Final-Recipient: RFC822; [email protected] Action: failed Status: 5.7.1 Remote-MTA: DNS; gmail-smtp-in.l.google.com Diagnostic-Code: SMTP; 550-5.7.1 [xxx.xxx.xxx.xxx] The IP you're using to send mail is not authorized Last-Attempt-Date: Fri, 4 Jun 2010 22:52:39 GMT How can I set this up to relay through a google account that I own? Is sendmail the best thing to use, or should I switch to Postfix or something? This is on an Ubuntu Server 9.10

  Read the article

• I'd like to archive files from Ubuntu to Windows between two computers on a shared home network

  - by Wabbitseason

  I have an old laptop running Ubuntu 9.10 which I use as a LAMP environment for web development, and I have a comfortable, powerful desktop computer with Windows 7 installed on it. These two are connected to a home router so both can access the internet. I have been able to set up Samba so I can mount my Apache home directory so it is accessible from Windows and is mapped as a network drive. What I'd like to do is access some Windows folders from Linux so I could automatically create backups (with cron scripts) of my work to physically different locations on the Windows box. Perhaps at a later time I'd set up a local Subversion repository but I'd love to keep backups of that on the Windows drives too. Using Ubuntu's Places/Network menu I can see my desktop but I'm unable to log in to that despite having created the corrent username and password on Windows. All I can get is the following error message: "Unable to mount location. Failed to retrieve share list from server." What could be misconfigurated?

  Read the article

• stsadm farm backup exits with ffffffff

  - by overbyte

  I have a SP2007 farm that uses stsadm through Scheduled Tasks to run farm backups. It always worked fine, however it ran for a couple of seconds one day and just exited with code ffffffff. Looked at Event Viewer, the Sharepoint logs themselves and nothing unusual happened at the time this job ran. No files were created so an spbackup.log doesn't exist. Searched the net for batch files and STSADM return codes but the error message doesn't even exist. Any other recommended place to look for issues like this?

  Read the article

• Windows Server 2003 (as workstation) unable to write to Samba fileshares

  - by remyhorton

  Setup is a Samba fileserver under Linux, which i am trying to access from a Windows Server 2003 box which has been reconfigured as a workstation. I can log onto the fileshares and can copy/delete files, but trying to open a file then write to it fails. Renaming files also fails with an error about requiring a filename. Drag/dropping files onto Xemacs gives me a message about copying from the network zone, and once open the file is read-only. Any ideas of what is wrong? I suspect it is a miscommunication of security details, as folder security options are all unchecked (checking them has no effect). I know it is not a problem with Samba itself, as Window2000, WindowsXP, and Nautulas (under Linux) can all access/edit fileshare files fine using the same userid/password. I am not using domain logins.

  Read the article

• sudo: cd: command not found when trying to get to /var/log/apache2

  - by Piers

  I'm running Ubuntu 10.04 and am having issues getting to the log files in /var/log/apache2 I can cd to most other places (I haven't tried every single file, obviously) but when I try to get to the above directory, I get the error message sudo: cd: command not found ... I've just tried something else and I can't cd when used in conjunction with sudo. I can use sudo when doing things like apt-get but it seems I can't change directory when using sudo. I haven't been on this server for a while but I know I used to be able to do this.

  Read the article

• Snow Leopard crashes my Xerox printer

  - by Ho Li Cow

  Just set up 2 brand new iMac 21.5" with OS X 10.6.2 pre-installed in our office. Now whenever we try to print an e-mail out, it re-sets the printer i.e. it switches off, does a POST and prints out a Printer Config page. I can print web pages and from other apps fine, just Apple Mail seems to be suffering. Printer is a Xerox Phaser 7750. I downloaded the drivers it recommended when i first tried printing which didn't help and then also tried downloading from the Xerox site. The latter seemed to install fine but then right at the end, it would say 'Installation Successful', then ask me to choose a printer (it found it fine, both by Bonjour and Raw TCP - i tried both) and then it would give an error message. Any help appreciated.

  Read the article

• "ant" is not recognized as command in Windows

  - by user1294663

  This is my first time developing Android applications. I'm developing an Android app on Eclipse on Windows 7. I would like to run the Android app from the Windows 7 command line interface. I have my Android device connected to the PC. The workspace directory that I use to store the Android project is C:\Users\Guest\Desktop\Software Applications Development\Java\Android Moblie Applications Projects\Eclipse Indigo for Java EE x64-bit\project workspace I opened the command line interface and I changed the working directory to the Android workspace directory. cd C:\Users\Guest\Desktop\Software Applications Development\Java\Android Moblie Applications Projects\Eclipse Indigo for Java EE x64-bit\project workspace I included Android sdk platform tools directory into the PATH environment variable. c:\Users\admin\Android-sdks\platform-tools Then I entered this into the Windows 7 command line interface: ant debug I have this error message on the cmd: ant is not recognised as an internal or external command, operatable program or batch file. What is the solution to this problem?

  Read the article

• Android - Force Close - Null Pointer on Canvas?

  - by user22241

  Please bear with me. I have a very odd problem. Basically, my app so far, has 3 activities (a main splash screen, an 'options/menu' screen and the main app). If I follow the very specific steps oulined below, I get a 'null pointer exception' in the 2nd activity) and the app force closes...... Here are the steps: Start the app (a game based on Surfaceview), tap through to the third activity so the game is running, then hit the home key so the game is paused and put to the background, the activity/app is ended through DDMS in the SDK then restarted on the device (all OK so far), now if I hit the back key on the device twice in quick succession, it happens. All other sequence of events is fine, even to the point of pressing the back key, waiting for the previous activity to show, then hitting back again - all OK. Only when the back key is pressed twice in quick succession following all the above steps does the problem occur. I'm assuming that the canvas isn't ready as it's showing as 'null' when this happens, but I'm not sure why this is happening as surely it's happening when I'm trying to go back to activity 1, but the logcat shows the error in activity 2. if I stop the activity running my 'doDraw' method (which referenced the canvas), then all is OK - so I can safely assume it is the canvas causing the problem. Also, if I skip my first activity (which is a very basic full-screen button which just displays a splashscreen and waits for the user to tap the screen), and make my 2nd activity the launch activity, again, it is OK. this is the part of the code that I think is probably relevant: @Override public void surfaceChanged(SurfaceHolder arg0, int arg1, int arg2, int arg3) { vheight = this.getHeight(); vwidth = this.getWidth(); } @Override public void surfaceCreated(SurfaceHolder holder) { vheight = this.getHeight(); vwidth = this.getWidth(); this.viewWidth = vwidth; this.viewHeight = vheight; if (runthread==false){ if (preThread.getState()==Thread.State.TERMINATED){ preThread = new OptionsThread(thisholder, thiscontext, thishandler); } preThread.setRunning(true); preThread.start();} } @Override public void surfaceDestroyed(SurfaceHolder holder) { preThread.setRunning(false); //Stop the loop boolean retry = true; //Stop the thread while (retry) { try { preThread.join(); retry = false; } catch (InterruptedException e) { } } Thank you all for any help you can offer

  Read the article

• -w test on OS X gives command not found error

  - by RobV

  I'm writing a bash script which I'm testing on OS X though it will ultimately run on a standard Linux environment and running into a weird error. I have tests like this in my script: if [ ! -w $BP ]; then echo "'$1' not writable" exit 1 fi Which seems pretty sane to me and works fine under Linux but when trying to test on OS X I get the following error message: startSvr.sh: line 135: [: missing `]' startSvr.sh: line 135: -w: command not found So is this a case of OS X not supporting the -w test or is there some other reason this isn't working for me? e.g. environment

  Read the article

• Websocket handshake response not forwarded from TCP to client

  - by Saharsh

  I am trying to create a websocket server. I can see the websocket client's opening handhshake. My response to it is received by the client laptop (I can see this on wireshark). So the TCP connection has been established. But the client (a chrome websocket client extension) does not receive the handshake packet. What could be a possible reason for TCP to not forward the handshake to the client or for the client to not be able to read the TCP message? Client handshake: GET HTTP/1.1 Upgrade: websocket Connection:Upgrade Cache-Control:no-cache Host:192.168.0.101 Origin:http://www.websocket.org Pragma:no-cache Sec-WebSocket-Extensions:permessage-deflate; client_max_window_bits, x-webkit-deflate-frame Sec-WebSocket-Key: qrmw/m+BoZije6h9HYKmVw== Sec-WebSocket-Version:13 Upgrade:websocket Server Response: HTTP/1.1 101 Switching Protocols Upgrade: websocket Connection: Upgrade Sec-WebSocket-Accept: jj1g5Io57m9ks8cme3jkbyo2asc= Access-Control-Allow-Origin: http://www.websocket.org Server: xyz Sec-WebSocket-Extensions: Thanks!

  Read the article

• HP Deskjet 3600: Offline and won't stop blinking and won't print.

  - by George Bailey

  Using Vista and an HP Deskjet 3600 on USB connection Normally when I unplug the printer, I open the printer queue and in the title bar it says "HP Deskjet 3600 - Use Printer Offline" then the offline message will go away and it will start printing. But for some reason, the bower button light is continually blinking. (this is the only light on the machine). The printer queue says "HP Deskjet 3600 - Offline" and when I unplug it it says "HP Deskjet 3600 - Offline - Use Printer Offline". I have tried unplugging it for a few hours, also tried turning it off for a few hours. Does anybody know what the single word Offline means? Does anybody know how I can clear out the memory in the Printer? (this is my guess as to what is causing the problem)

  Read the article

• OSX Mail.app send only plaintext but read as html

  - by bawkstoo

  I get email which seems properly plaintext formatted, but when I forward it out, the font size ends up being enormous and a few other formatting stupidities. So I tried the following: defaults write com.apple.mail PreferPlainText -bool TRUE And this works great, all outgoing email regardless of the text original is plaintext only, just the way I like it. But now for incoming email only the plaintext portions are available to read without going into View - Message - Raw Source (or something similar to that). Does anyone know how I can force only outgoing mail to include only plaintext, but continue to read incoming mail in the formatting it was intended?

  Read the article

• How do I write to an outer truecrypt volume when the inner volume protection prevents writng?

  - by con-f-use

  In a nutshell After some time using the outer volume of a hidden volume in Truecrypt I cannot write to the outer volume anymore. The protection of the inner volume always kicks in before. How do I fix this? Details I'm using truecrypt's two layered encryption of a USB stick. The outer container carries my semi-sensitive stuff while the inner hidden values has a bit more valuable information. I use both, the inner and outer volume regularly and that is part of the problem. Truecrypt can mount the outer volume for writing while protecting the inner. Usually the inner volume, when not protected this way (or mounted read-only) would be indistinguishable from free space. That is of course part of the plausible deniability scheme of truecrypt. At the beginning, everything worked as expected. I could copy and delete data to the outer volume as I pleased. Now it seams that I have written and deleted enough data to have filled the outer volume once. Despite the write protection Ubuntu tries now to write to the continuous "free space" that is the inner volume. It does that although enough other free space is on the outer volume. But on this free space there used to be data so its fragmented and the file system write prefers continuous space. The write on the continuous free space of the outer volume of course fails (with the error message in the picture above) as Truecrypt's inner-volume-protection kicks in. The Question I know this is expected behaviour, but is there a better way to write to the outer volume that does not attempt to write to the hidden free space at the end? The whole question could be more generally rephrased to: How do I control, where on a partition data is written in Ubuntu?

  Read the article

• Can't Log Into Ubuntu 12.04

  - by Razick

  Yesterday, after turning on Ubuntu, I logged into a Gnome session. A few minutes later, I tried switching to Unity for a change. Unfortunately, the background and my desktop icons loaded, but the system bar and launcher failed to load even after several minutes. Unity had always worked fine for me. I then tried the guest account, and it worked fine on both Unity and Gnome. However, the problem with my account got worse; I couldn't log into any desktop at all anymore. I would type in my password and press enter and it would just sit there doing nothing. The computer no longer responded in any way, so I had to hold the power button and reboot. The same problem happened repeatedly. Earlier today, I tried to get on again. I found that I hadthe same problem, when I tried to log in, the computer no longer locked up, but instead flashed a black screen with theconsole output and what seemed to be an error message before returning to the log in screen. It was to quick for me to read, about 1/4-1/2 second. I'd really appreciate some help as I have some important files that are not backed up yet. I can't transfer the files to a new account, or even make a new account because I tried taking the password off my account so now I can't authenticate from the guest to perform root functions. I'd really appreciate some help as I have some important files that are not backed up yet. Thanks.

  Read the article

• Remote desktop fails with user denied until client reboot

  - by Andrew J. Brehm

  Sometimes (but often enough to anoy) Remote Desktop Connection cannot connect to a server (2008 R2 but maybe also 2003) and claims that "The connection was denied because the user account is not authorized for remote login." The user is always authorized for remote login and the connection works from other clients. (Although this is the very same message that appears when a user really isn't autorized for remote login.) The problem always goes away after a client restart. The client is always Windows 7 but I have no (other) reason to assume that it only affects Windows 7 clients. Any idea what causes this?

  Read the article

• I can't get grub menu to show up during boot

  - by wim

  After trying (and failing) to install better ATI drivers in 11.10, I've somehow lost my grub menu at boot time. The screen does change to the familiar purple colour, but instead of a list of boot options it's just blank solid colour, and then disappears quickly and boots into the default entry normally. How can I get the bootloader back? I've tried sudo update-grub and also various different combinations of resolutions and colour depths in startupmanager application with no success (640x480, 1024x768, 1600x1200, 16 bits, 8 bits, 10 second delay, 7 second delay, 2 second delay...) edit: I have already tried holding down Shift during bootup and it does not seem to change the behaviour. I get the message "GRUB Loading" in the terminal, but then the place where the grub menu normally appears I get a solid blank magenta screen for a while. Here are the contents of /etc/default/grub # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX=" vga=798 splash" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1"

  Read the article

• BizTalk 2009 - How do I do t"HAT"?

  - by StuartBrierley

  In my previous life working with BizTalk Server 2004, I came to view HAT (the Health and Activity Tracking tool) as one of my first ports of call in the case of problems with any of our BizTalk solutions.  When you move to BizTalk Server 2009 it is quickly apparent that HAT is no longer with us. HAT was useful in BizTalk 2004 mainly as it provided developers and administrators with a number of useful queries and views of what was going on inside BizTalk at runtime; when and what type of messages were received and sent, what messages had been suspended, what orchestration were running or suspended, you could even follow the process flow of a message or orchestration to see what was going on. With BizTalk Server 2009 much of the functionality of HAT can now be found in the BizTalk Administration console.  Select a BizTalk Group and you will be shown the Group Hub Overview page.  This provides a number of default queries that replicate some of those found in the old HAT. You can also use the Group Hub page to create new queries.  These can then be saved and loaded in other Group Hub instances - useful for creating queries in development for later use in Test, Psuedo-Live and Live environments. In the next few posts I am going to look at some of the common queries that we might miss from HAT and recreate them (or something close) using the new query option. Messages - last 100 received Messages - last 100 sent Messages - last 50 suspended Service instances - last 100 I have yet to try the updated Admin-HAT-Console in anger, and after using old-HAT for so long it may take some getting uesd to, but so far I would say that moving the HAT functionality into the BizTalk Administration console was probably the correct way to go.  Having one tool as the place to look for the combined functionality on offer certainly seems to be the sensible option.

  Read the article

• Windows 7 - You don't have permissions to save in this folder

  - by James

  Huh? I'm getting this message - "You don't have permissions to save in this folder" - even though I am the only user on this machine, and administrator. How can I set permissions for myself to do everything, everywhere (including saving deleting etc)? Thanks. Edit: Sorry, forgot to say which folder it was. It is a folder in Program Files, where I save my PHP files for local testing. Sorry if Im a bit daft with all this, but I've upgraded straight from XP to 7, and having never used vista, I'm used to being allowed to have full control.

  Read the article

< Previous Page | 701 702 703 704 705 706 707 708 709 710 711 712  | Next Page >