Search Results

Search found 28582 results on 1144 pages for 'message loop'.

Page 709/1144 | < Previous Page | 705 706 707 708 709 710 711 712 713 714 715 716  | Next Page >

• Asus A8V overcurrent

  - by user139710

  This is not as much as a question as it is a note to those out there that upgrade their motherboards with better processors and the like. Here's my story. Recently I upgraded my processor. System specifications: • Asus A8V Deluxe • 4GB RAM • ATI Radeon 3870 AGP graphics card (I believe that's it) Anyway, I decided to put a dual core Opteron 180 in this rig, but the problem was that I needed to update the BIOS to V-1017, and not knowing the consequences, I went up to the Asus site and got the newest, the latest and the greatest, 1018.002 thinking that it was the best for this board, however it wasn't. I used the Asus EXFlash, which makes life a lot easier, flashed the BIOS and all of a sudden I start getting this message: USB overcurrent protection, system shutting down in 15 seconds to protect your system. WELL SHIT... This is a new one on me... I read the blogs, all the posts on this thing, and did all that everyone else did to correct the problem, but nothing helped. So i decided to start from square one, went back to Asus and looked at the BIOS download... OMG... IT WAS A BETA. So, I downloaded the update that was suggested 1017< and installed it and wouldn't you know, it took care of the problem, no more USB overcurrent protection, no more crashing. I write this today to let you all know about this, just in case you have an issue such as this. Well there you all go. Fly safe and eat your vegetables.

  Read the article

• Created new account instead of alias for original ID

  - by Mahesha999

  Hi I had Live ID for many years. To try Outlook.com I created a new ID. However now I want to use that same ID as an alias in my original Live account, which is also now upgraded to new Outlook Experience. When I went creating alias for that ID, it obviously showed message saying ID is in use. So I searched if I can delete an account altogether. But did not found anyway to delete that newly created account. Then I renamed my newly created ID. It got renamed, but that old ID is now made alias in that new account. So, still I am not able to create an alias with the same ID in my original Live account. What can I do?

  Read the article

• Do you know a script for email round trip monitoring?

  - by crazyfr

  Do you know a simple script that can do email round trip monitoring ? I want to monitor email service on A. I install the script on B. B sends an email to A A sends an auto-reply to B B knows that email service is working well. B restarts this test every 30min. If B didn't received replies, it sends an alert message. B could also monitor round-trip delay of emails. I have not access to the email service, I can only ask new end user email and configure auto-reply. B is an Ubuntu. Thanks!

  Read the article

• Advantages of Scala vs. Groovy with JAVA EE 6 Applications.

  - by JAVA EE Wannabe

  Please let me first emphasize that I am not looking for flare wars. I just want advices from people who have real experiences. I started learning JAVA EE 6 as real newbie and am having had time choosing what tools to use. First problem is what is the advantage of using Scala vs. Groovy with Java EE 6 apps over Java? I've seen on some blogs people mentioning you gonna write less code but as a newbie I don't know what other advantages and disadvantages are there. Second problem is Netbeans 6.9 or Helios 3.6.1? I realized that with eclipse I can easily mix EE 6 applications with Groovy or Scala without any problems (I only did this by displaying a String message from Scala and Groovy classes.). With Netbeans the only I can think of is having separate Java project libraries and using the jars in my web app. But also realize to the extent of my little knowledge Netbeans has better support for Java EE 6. Please need your expert advice. Thanks.

  Read the article

• Another hibernation question

  - by GeekOfTheWeek

  I installed Ubuntu on my Windows 7 Sager laptop using Wubi. Hibernate (i.e. suspend to disc) is not an option from the power icon, only suspend, shutdown, etc. Hibernate is also not an option from my battery/lid close options. I understand that hibernation is disabled by default in Ubuntu 12.04. I tried running pm-hibernate but I get the following message: Looking for splash system... none s2disk: Snapshotting system and then the computer just hangs with a black screen. According to the documentation here if this fails then I can't enable hibernate but it offers no help in making pm-hibernate succeed. Could swap be my problem? It looks like I have very small swap: user@ubuntu:~$ cat /proc/swaps Filename Type Size Used Priority /host/ubuntu/disks/swap.disk file 262140 0 -1 The advice on SwapFaq is only for the author's set up (e.g. I don't have an Ubuntu install disk since I used Wubi) and he says that 'INFO: This will not work for 12.04, resume from hibernate work differently in 12.04.' Any advice? I really need to get hibernate working to use my laptop as a, er, laptop. Thanks

  Read the article

• Video problem with Windows 7 Games

  - by Jordan 1GT

  I have a Dell xps M1330 which originally ran Vista, but I upgraded to Windows 7. When I try to run a Win 7 game like spider solitaire I receive the following message: "The game is running in software rendering mode. Hardware acceleration is either disabled or not supported by your video card driver which could slow down game performance. Make sure you have the latest video card driver installed and that hardware acceleration is turned on." I confirmed that hardware acceleration is turned on. When I go to Dell's site, I'm told there is no later video driver. When I run the game it runs very choppy. I wouldn't care, but I loaded a .pptx file which is doing strange things in normal view and I suspect may be related to the same video problem. Any ideas?

  Read the article

• Forwarding Emails From Inbox Only

  - by ircmaxell

  I have a forward setup on one of our public facing email addresses to a few users outside of our system (to an external address). Seeing as it's public (printed on a website in plain text), we get TONS of spam on that account. We're being marked as a SPAM source due to the forwarding by the external system. We have pretty aggressive IMF (Intelligent Message Filtering) setup, and it works great for internal messages. The problem we're facing is that Exchange is forwarding ALL the email received on that account, and not just the messages that pass the IMF (and don't get pushed into Junk). As far as I can tell, there's no way to adjust the IMF settings for that one account. And as far as I can tell, there's no way to setup folder forwarding (inbox - external address) from Exchange. Is there something I'm missing or is there any way around these issues that I may be missing? Thanks...

  Read the article

• Force Run System File Checker (SFC.exe)

  - by Zuck

  C:\Windows\system32>sfc /scannow Beginning system scan. This process will take some time. There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again. Is there a way I can force SFC to scan again and make the new fixes on reboot? Probably by deleting some file or something? I removed C:\Windows\WinSxS\pending.xml by taking ownerships but it still shows the same message.

  Read the article

• Having internet on a VirtualBox

  - by S4M

  I am running a linux laptop and I set up a VirtualBox under windows XP. My only problem is the VirtualBox doesn't seem to be connected to internet - When I do the connection diagnosis it tells me there is no connection. I am using an NAT adapter, and I bind the port 80 from my computer to the port 80 of the VirtualBox, and same for the ports 8080, but still no result. I would be grateful is someone could help me to sort this out. EDIT: thinking of it, what is making the problem hard - and painful - is the absence of error message. If I try to use a given adapter to share my computer's connection with the VirtualBox, and it doesn't work, I have no way to know why. So, it would be really helpful if someone could share a way to access this king of information (is there a log file somewhere or a way to run VirtualBox from command line in a verbose mode?).

  Read the article

• <authentication mode=“Windows”/>

  - by kareemsaad

  I had this error when I browse new web site that site sub from sub http://sharp.elarabygroup.com/ha/deault.aspx ha is new my web site Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. Source Error: Line 61: ASP.NET to identify an incoming user. Line 62: -- Line 63: Line 64: section enables configuration Line 65: of what to do if/when an unhandled error occurs I note other web site as sub from sub hadn't web.config is that realted with web.config and all subs and domain has one web.config

  Read the article

• Moving Exchange .EDB and .STM file to other partition

  - by Jorge Fernandez

  Im trying to move my exchange mailbox store to a new partition and i keep running into an error message saying: "cannot copy insufficient system resources exist to complete the requested service." The server is a Dell Poweredge 2850 with Dual Xeon Processors @ 3.00GHz and 4GB of ram. Running Win Server 2K3 R2 SP2 with Exchange 2K3 Standard. The Store is around 55GB any ideas. I want to get exchange on its on partition since I need to free up some space on the partition its currently on.

  Read the article

• Emacs stops taking input when a file has changed on disk [migrated]

  - by recf

  I'm using Emacs v24.3.1 on Windows 8. I had a file change on disk while I had an Emacs buffer open with that file. As soon as I attempt to make a change to the buffer, a message appears in the minibuffer. Fileblah.txt changed on disk; really edit the buffer? (y, n, r or C-h) I would expect to be able to hit r to have it reload the disk version of the file, but nothing happens. Emacs completely stops responding to input. None of the listed keys work, nor do any other keys as far as I can tell. I can't C-g out of the minibuffer. Alt-F4 doesn't work, not does Close window from the task bar. I have to kill the process from task manager. Anyone have any idea what I'm doing wrong here? In cases it's various modes not playing nice with each other, for reference, my init.el is here. Nothing complex. Here's the breakdown: better-defaults (ido-mode, remove menu-bar, uniquify buffer `forward, saveplace) recentf-mode custom frame title visual-line-mode require final newline and delete trailing whitespace on save Markdown mode with auto-mode-alist Flyspell with Aspell backend Powershell mode with auto-mode-alist Ruby auto-mode-alist Puppet mode with auto-mode-alist Feature (Gherkin) mode with auto-mode-alist The specific file was a markdown file with Github-flavored Markdown mode and Flyspell mode enabled.

  Read the article

• root directory - www or public_html

  - by Phil Jackson

  Is the root directory where all files are kept (directly from accessing from FTP) always "www" or "public_html" depending on what OS? Or is it possible to rename this folder? And if so, what would be unique about this folder to be able to identify it? i.e. currently I just wrote this; my $root; my $ftp = Net::FTP->new($DB_ftpserver, Debug => 0) or die "Cannot connect to some.host.name: $@"; $ftp->login($DB_ftpuser, $DB_ftppass) or die "Cannot login ", $ftp->message; my @list = $ftp->dir; if( scalar @list != 0 ) { foreach( @list ){ if( $_ =~ m/www$/g ){ $root = "www"; last; }elsif( $_ =~ m/public_html$/g ){ $root = "public_html"; last; } } } but would not work if it has a different name. Any help much appreciated.

  Read the article

• In Windows Vista, when starting any and every program, a "bad image" error is generated

  - by Mark Hatton

  I have a problem where any program is started under Windows Vista, the following error message is generated Bad Image C;\PROGRA~1\Google\GOOGLE~3\GOEC62~1.DLL is either not designed to run on Windows or it contains an error.Try installing the program again using the original installation media or contact your system administrator or the software vendor for support. This happens for every program started, including those that start automatically at boot time. My Google-fu is failing to solve this for me. I have already tried an "sfc /scannow" which did find some problems, but it said that it could not correct them. What might cause this problem? How might it be resolved?

  Read the article

• Allow non-sudo group to control Upstart job

  - by Angle O'Saxon

  I'm trying to set up an Upstart job to run on system startup, and that can also be started/stopped by members of a group other than sudo. With a previous version, I usedupdate-rc.d and scripts stored in /etc/init.d/ to get this working by adding %Group ALL = NOPASSWD: /etc/init.d/scriptname to my sudoers file, but I can't seem to get an equivalent working for Upstart. I tried adding %Group ALL = NOPASSWD: /sbin/initctl start jobname to the sudoers file, but trying to run the command start jobname produces this error: start: Rejected send message, 1 matched rules; type="method_call", sender=":1.21" (uid=1000 pid=5148 comm="start jobname " interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply="0" destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init") As near as I can tell, that's a complaint about how my user account isn't given the power to send 'Start' messages in the D-Bus config file for Upstart. I haven't been able to actually find any information on how to edit that file to give a group permission to access a specific service--does such an option exist? Is there a way to edit the Sudoers file so I can run the job without editing the config file? Am I better off just sticking with the previous version?

  Read the article

• System reserved

  - by arun sidharth

  I have a HP laptop. I upgraded to windows 7 ultimate from home basic. Now I'm trying to upgrade to Windows 8 but when I do I get a message saying not enough system partition. So I opened the disk manager and increased the size of system reserved partition and it was of no use I still got the same error. Then I unfortunately deleted the 100MB system reserved partition by right clicking it and clicking format in the disk manager! Now I am not able to boot any CD's from the startup including OS and recovery CD. Whenever I press esc it always goes to the login screen and it doesn't say anything about the boot from CD option. Now I could not even use my recovery CD. I have 3 questions: Is it necesseary to create a system reserved partition if so how to create it? How to use my recovery cd How to install win 8

  Read the article

• Usb stick too slow to benchmark?

  - by user85340

  I have a Core 2 Duo [email protected] with 3GB RAM. After some time using XUbuntu 10.10 on an 8GB stick I decided to switch to 12.04 and put it onto a 32GB stick (Transcend). I use an EXT4 with no journalling, noatime etc set. /tmp and /run is using tmpfs. And it is REALLY slow. MUCH slower than the old Xubuntu on the 8GB stick. Starting takes minutes, all applications "fade" because they respond too slow. I first thought that the NVidia graphics card is responsible for this, because there seem to be some known problems with that. Doing the adjustment (uncheck the sync checkbox) did not help. I believe the root cause is that the access to the USB stick is extremely slow. Running the read benchmark of the disk utility then brought the message "disk is too slow to benchmark"! BUT: When I do the same benchmark with the live CD I get around 20MB read performance and have a very responsive system! So how can I find out what is going one here?

  Read the article

• How to get source with apt-get source in Ubuntu?

  - by Jonas

  I need to install pure-ftpd from source and need to do apt-get source pure-ftpd but I get this message: E: You must put some 'source' URIs in your sources.list I found some documentation about this for Debian on http://www.debian.org/doc/manuals/apt-howto/ch-basico.en.html#s-sources.list but what URIs should I add to sources.list for Ubuntu and if I want the source for pur-ftpd? EDIT: I found some URIs on Sources.List For Ubuntu Hardy Heron (8.04) So I added these lines to my /etc/apt/sources.list: deb-src http://archive.ubuntu.com/ubuntu/ hardy main restricted universe deb-src http://archive.ubuntu.com/ubuntu/ hardy-updates main restricted universe

  Read the article

• snort-mysql not starting on Ubuntu server

  - by Rsaesha

  I am following this tutorial: https://help.ubuntu.com/community/SnortIDS I've set up the database, everything has installed correctly, and I've configured the snort.conf file so it outputs to a database (with creds all filled out ok). When I run /etc/init.d/snort start, it fails but does not produce any error message other than [fail]. The last few lines of /var/log/syslog are: snort[5687]: database: must enter database name in configuration file#012 snort[5687]: FATAL ERROR: My output database line in the snort.conf file is: output database: log, mysql, user=snort password=... dbname=snort host=localhost I have tried it with the commas separating everything, putting quotes around stuff, etc. The password is only made up of letters (after I thought maybe a number was throwing it off).

  Read the article

• Installing 10.04 server on HP xw9400 Workstation with RAID 5

  - by Dave Long

  I have a workstation that was given to me that is a friggen powerhouse, so I figured I would set it up as my development and demo server. This is my first experience installing Ubuntu onto a RAID array and so far it has not been a fun one. I have been following the Advanced Installation guide for installing Ubuntu 10.04 server, and it says that there will be an option on the Partition Disks screen to manually create the partitions, but the only options I have are: Configure iSCSI volumes Undo changes to partitions Finish partitioning and write changes to disk Just before I got to that screen I got a message that said: One or more drives containing Serial ATA RAID configurations have been found. Do you wish to activate these RAID devices? It doesn't matter whether I answer yes or no to that, I still get the same Partition Disks screen. When I try to select Finish partitioning and write changes to disk I just get the No root file system error. Has anyone else experienced this, and how do I get past it? Can I not run Ubuntu on this machine?

  Read the article

• Cannot Delete an Empty Folder in Windows 7

  - by Mike Gates

  I've used this question's answer by user "Moab" to give myself permission to delete an empty folder, so that I no longer get "accessed denied". However, now when I try removing this folder, I get a message that says "The process cannot access the file because it is being used by another process." This is merely my "eclipse" (IDE) folder that I totally emptied out and am trying to delete, but for some reason cannot. I've tried quite a few things: Via Windows Explorer: Right Click - Delete Via Command Prompt RD /S /Q eclipse del /F eclipse rmdir /S eclipse I'm out of ideas, and I'd really like to delete this folder without having to install any software. I've done a bit of research and this is all I found that I could try. Does anyone have any other ideas?

  Read the article

• Activating Sharepoint Server Publishing Infrastructure returns "Column Limit Exceeded"

  - by Haydar

  I am getting the following error when attempting to activate the Sharepoint Server Publishing Infrastructure. There are only about 140 columns defined in the entire site collection. I had previously activated and subsequently deactivated this feature. I don't know whether this might be causing the problem. But I really have no idea. I am a developer and this is my first question on serverFault. Please be gentle. Error Message: Column Limit Exceeded. There are too many columns of the specified data type. Please delete some other columns first. Note that some column types like numbers and currency use the same data type. Troubleshoot issues with Microsoft SharePoint Foundation. Correlation ID: 2ec9ae3a-5464-4922-9760-874099f51420 Date and Time: 11/8/2010 3:43:44 PMDate and Time: 11/8/2010 3:43:44 PM

  Read the article

• How to solve virtual host issue

  - by Webnet

  I have multiple sites all setup the same as below except "bk" has something else in it's place... NameVirtualHost *:80 <VirtualHost bk:80> ServerName bk DocumentRoot /var/www/bk.com/ </VirtualHost> and I get these errors when restarting apache: [Mon Jan 17 10:28:56 2011] [error] VirtualHost bk:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results [Mon Jan 17 10:28:56 2011] [warn] NameVirtualHost bk:80 has no VirtualHosts I don't get it... the other 2 sites I have virtual host configurations for this exact same way don't throw any errors update One error message fixed - here's where I'm at now.. <VirtualHost bk:80> ServerName bk DocumentRoot /var/www/bk.com/ </VirtualHost> [Mon Jan 17 10:28:56 2011] [error] VirtualHost bk:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results

  Read the article

• Installing my own XP VHD into Win 7.

  - by malcolms

  Hi, I am follwing instructions on this site to install my own XP VHD into Win 7 virtual PC (XP mode) http://www.windows7hacker.com/index.php/2009/09/how-to-make-your-own-vhd-to-xp-mode-or-even-vista-mode-ready/ Problem is when I click on install Integration Components on the Tools menu the setup does not start. And I do not understand this message that comes up because I can't start VM at this point at all. It says "If setup does not run automatically, open the CD-rom drive inside the virtual machine and run setup" So what does the mean when i cant run the VM?? Malcolm

  Read the article

• "remote file operation failed" on Hudson

  - by Aveen

  I am running a Windows slave for Husdon 1.337 (Linux master). When running a project on the Windows node, it fails with the following message: Building remotely on winTestSlave Checking out a fresh workspace because there's no workspace at C:\hudson\***\ejb remote file operation failed It did work yesterday and I have not upgraded Hudson or changed its configurations (or the slave's configurations) in any way. I establish the connection between the slave and the master by running the following command on a cygwim prompt on the slave: java -jar slave.jar -jnlpUrl http://myserver/computer/winTestSlave/slave-agent.jnlp I saw the issue http://issues.hudson-ci.org/browse/HUDSON-5374 and did as instructed in the work-around but that did not work. I also tried with a newer version of slave.jar (version 1.356) but that did not work either. Does anyone please have any idea of how to fix this? I really cannot find more information anywhere else!

  Read the article

< Previous Page | 705 706 707 708 709 710 711 712 713 714 715 716  | Next Page >