Search Results

Search found 20442 results on 818 pages for 'software evaluation'.

Page 707/818 | < Previous Page | 703 704 705 706 707 708 709 710 711 712 713 714  | Next Page >

• Choosing a new laptop

  - by chiongms

  I'm looking for a new laptop. I saw few: i) HP ProBook 4321s ii) HP ProBook 6440b iii)Dell Latitude E6410 i found these laptops are still very new..is it? not much comments about them. can anyone help? i doubt how their graphic cards perform compare to each other? ProBook 4321s- Radeon HD4350 ProBook 6440b- Radeon HD4550 Latitude E6410- NVS 3100M most of the time i'll running 3D CAD software, C++ programing...i saw my friend's laptop with radeon HD4350. it's perfectly fulfilling my demand. but i wonder how the other two are? Another thing i doubt is the screen resolution..my current laptop is 1280x800, and i found it comfortable to use. But these two HP only offer 1366x768..will it make any large different? Lastly, is there anyway to estimate how their power consumption is from the spec sheet? well, i would prefer one with longer battery usage time. my current laptop is suck...only last 1 hour even when it's still new..i'm not going to get another like this anymore. Anyone can help me please? Thanks!

  Read the article

• How can I wipe my iPod classic and fix any bad sectors on the hard drive without killing it?

  - by Sam Meldrum

  My iPod never finishes syncing and only syncs audio, not pictures or video - any ideas as to how I can fix it? My iPod classic 160GB worked well for a couple of years. I used to sync a lot of photos at full resolution to it, but this recently stopped working after I moved to Windows 7. iTunes is on latest version - 9.1.1.12 iPod software is up to date - 1.1.2 Windows 7 is fully up to date and patched The symptoms are that the iPod will start to sync, all audio (music and podcasts will sync successfully) but the syncing will then just appear to continue - itunes message: Syncing iPod. Do not Disconnect. This sync never completes - I have left it trying for days. I have tried resetting the iPod using the Restore button, whereupon it restarts sync from default options and again will sync audio, but nothing else. I suspect that something has gone wrong on the hard-drive - either a bad sector or some corrupt data. Is there a process I can go through to fix this? E.g. SpinRite or a format? If so how do I go about formatting an iPod and will it be recognised as an iPod after format and work as normal? Any advice on what to try next much appreciated? Update I have eliminated problems with the files, PC or iTunes as they sync fine to other iPods. I have also eliminated the cable by trying different cables which work with other iPods. What I'd really like to know is if there is any way to more fundamentally wipe the iPod safely, attempt to repair any bad sectors on the hard drive and then start from scratch. Anyone ever managed this?

  Read the article

• Apple Mac OS X Mavericks inside Virtual Box

  - by John Sonderson

  I have a few questions regarding Mac OS X and OS virtualization. A. Given all the legal restrictions imposed by Apple on Apple products, I would like to know whether it is legal to install the new and freely downloadable Apple Mac OS X Mavericks inside Oracle Virtual Box. B. What about older OS X versions such as Mountain Lion? C. How many machines can I install it on. What if I don't use the Mac to which the OS is downloaded but only use it on Virtual Box, and prefer to, say, install Linux on the Mac computer so that it doesn't become unusable due to the single user license policy and me running the OS on Windows 7 within Virtual Box? D. I have a PC running Windows 7 but would like to get the OS off a second had Mac I'm planning to purchase for this purpose. How must we proceed to copy the OS to an ISO so that I can install it on Windows 7? I am unfamiliar with Macs and do not know what software to use for the purpose, nor where the OS is downloaded to (as an ISO, .app executable, .gz or .zip file or whatever). If anyone could provide some guidance with the process I would sincerely appreciate it. Thanks.

  Read the article

• Cannot click send button in Outlook (+ Exchange) for unknown addresses

  - by Graphain

  Hi, I have a very unusual problem. I have Outlook 2010 connected to Exchange 2010. This can send emails perfectly to known addresses (that is, addresses in the address book or ones that have been sent to previously). However, if I put in an address that is unknown, I cannot actually click the Send button in Outlook. (it simply does nothing). Corresponding to this I get errors in the Event Log for each Send click stating "The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.". However, Outlook shows as connected the whole time, pings do not break, and I have no reason to suspect it has lost connection. To further complicate matters, Outlook is fine on all other PCs, and this was all perfect until I installed BitDefender on the PC in question and the Exchange Server. Outlook was still fine on these other PCs while BitDefender was installed, but I have removed it from the PC in question and the Server just in case (no success). Summary: Outlook encounters Exchange connectivity issues when sending to unknown (new) email addresses that prevent the Send button actually working at all. This is isolated to one machine and occurred after installation of AV/Firewall software which has since been thoroughly removed. If you have any potential solutions I'd love to hear them, as I will be resorting to reformatting the PC in question, and probably removing Exchange because I'm sick of its issues if I cannot resolve this soon. Big thanks for any help.

  Read the article

• Creating basic, redundant gigE or IB storage network for Xen?

  - by StaringSkyward

  With only a modest budget, I want to move my 4 xen servers over to network storage -either NFS or iSCSI which will be determined based on how well it performs when we test it (we need good throughput and it must continue to work through link and switch failure tests). We may add another couple of xen servers at some point when this is done. I don't know much about the design and operation of storage networks, so would really appreciate some hints from those with experience. The budget is around $3,800 excluding the storage appliance. I am currently thinking these are my options to remain on budget: 1) Go for used infiniband hardware and aim for 10gb performance. 2) Stick with gig ethernet and buy some new switches (cisco or procurve) to create a storage-only ethernet LAN. Upgrade to 10gigE later but try to use hardware capable of it where possible to reduce upgrade costs. I have seen used, warrantied infiniband switches at reasonable prices (presumably because big companies are converging on 10gbit ethernet?) and the promise of cheap 10gb is attractive. I know nothing about IB, so here come the questions: Can I buy 2 x switches and have multiple HBAs in my xen and storage nodes to get redundancy and increased performance without complexity or expensive management software costs? If so, can you point me to some examples? Do NFS and iSCSI work just the same regardless? Is IB a sensible choice or could/should I use ethernet or FC on the same budget - I'm keen not to get boxed into a corner for future upgrades, however. For the storage I am likely to build a storage server using nexentastor with the intention that I can later add more disks, SSDs and add another server to provide a failover option at the storage level. An HP LeftHand starter SAN is also under consideration, too. Thanks in advance.

  Read the article

• Programmer configuring a new network

  - by David Lively

  I'm in the process of expanding my home network from a couple of laptops on a wireless Verizon FiOS router to include: Linksys 24-port switch Cisco Pix 515 Cisco 3640 router One new development desktop and three new machines to act as a db server, web server and a backup system. My company is moving offices and we've decommissioned some older hardware, which I was able to pick up for the cost of the labor to move it home from the office. The benefits to working with dedicated web and db servers are very valuable to me. I know very little about network topology, other than that everything plugs into the switch, which then plugs into the cheap Verizon router. (Verizon provides a coax connection that the router must translate into Ethernet before I can use it with any of this equipment). Questions: What is the recommended topology for this equipment? Verizon router - Pix - 3600 - switch? Is the 3600 even necessary or desirable? The Verizon router has one WAN port and 4 client ports, all 10/100. Is there any performance benefit at all to wiring multiple connections from the verizon router to the switch, assuming I don't use the Pix? Should I use the Pix? Software firewalls are a pain, and seem silly if I have a device like this lying around. Anything else I should know? Am I wasting my time with this? I also obtained a 7 foot rack, shelves, patch panels, UPS, patch panels, etc, which are going into a conveniently air conditioned closet. All constructive advice appreciated.

  Read the article

• Any Recommendations for a Web Based Large File Transfer System?

  - by Glen Richards

  I'm looking for a server software product that: Allows my users to share large files with: The general public securely to 1 or more people (notification via email, optionally with a token that gives them x period of time to download) Allows anyone in the general public to share files with my users. Perhaps by invitation. Has to be user friendly enough to allow my users to use this with out having to bug me as the admin. It needs to be a system that we can install on our own server (we don't want shared data sitting on anyone else's server) A web based solution. Using some kind or secure comms channel would be good too, eg, ssh Files to share could be over 1 GB. I found the question below. WebDav does not sound user friendly enough: http://serverfault.com/questions/86878/recommendations-for-a-secure-and-simple-dropbox-system I've done a lot of searching, but I can't get the search terms right. There are too many services that provide this, but I want something we can install on our own server. A last resort would be to roll my own. Any ideas appreciated. Glen EDIT Sorry Tom and Jeff but Glen specifically says that he's looking for a 'product' so given that I specialise in this field thought that my expertise in this area may have been of use to him. I don't see how him writing services is going to be easy for him to maintain going forward (large IT admin overhead) or simple for his users and the general public to work with.

  Read the article

• Why is OpenSSH not using the user specified in ssh_config?

  - by Jordan Evens

  I'm using OpenSSH from a Windows machine to connect to a Linux Mint 9 box. My Windows user name doesn't match the ssh target's user name, so I'm trying to specify the user to use for login using ssh_config. I know OpenSSH can see the ssh_config file since I'm specifying the identify file in it. The section specific to the host in ssh_config is: Host hostname HostName hostname IdentityFile ~/.ssh/id_dsa User username Compression yes If I do ssh username@hostname it works. Trying using ssh_config only gives: F:\>ssh -v hostname OpenSSH_5.6p1, OpenSSL 0.9.8o 01 Jun 2010 debug1: Connecting to hostname [XX.XX.XX.XX] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa type -1 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa-cert type -1 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa type 2 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debia n-3ubuntu5 debug1: match: OpenSSH_5.3p1 Debian-3ubuntu5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'hostname' is known and matches the RSA host key. debug1: Found key in /cygdrive/f/progs/OpenSSH/home/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa debug1: Offering DSA public key: /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). I was under the impression that (as outlined in this question: How to make ssh log in as the right user?) specifying User username in ssh_config should work. Why isn't OpenSSH using the username specified in ssh_config?

  Read the article

• Value of Itanium over x86_64 for Oracle Deployment

  - by Antitribu

  We are looking at a new environment to run our Oracle Database running on SUSE (potentially migrating to RedHat). Our database is approximately 100GB and performs adequately on our current hardware (x86_64) with approximately 6GB of ram allocated to it. We are growing quickly however and will require more performance shortly. Given the cost of Oracle licenses we would like to maximize the value from each license by choosing the most appropriate CPU to run the software on. The questions are: Are there substantial benefits to looking at Itanium hardware, are there any drawbacks? Is there a point where Itanium starts to scale out better? What are the long term support options for Itanium? Given the dominance of x86 would it be safer long term to stick with x86? On average what would be the performance benefit of implementing an Oracle database on Itanium over x86_64? Is this an issue at all or will other factors (IO/RAM) cap out first? If anyone can point me towards some solid documentation on comparisons between the two platforms that provides good case analysis of when to choose which I'm more than happy to accept that as an answer.

  Read the article

• Does NetworkSolutions have a good DNS service?

  - by joxl

  I'm recovering from a DNS disaster and I need some good advice on an alternate solution. My company owns a domain name through NetworkSolutions. Our website is hosted by another company who also maintains our DNS records. Our email is hosted by Google Apps, and the MX records are maintained through the afore-mentioned website/DNS host. Yesterday our website/DNS host had a serious hiccup in some software and completely overwrote all of our DNS records with invalid values; successfully pointing our domain and MX records at the wrong servers. Unfortunately it wasn't caught until it had time to significantly propagate. On top of that, it wasn't fixed until several hours later, combine that with a long TTL on the records; we have customers who are still bouncing emails. Anyhow, I am now completely terrified of this company's ability to do a good job, so I am considering switching to NetworkSolutions for our DNS service. I need the ability to configure A, CNAME, MX, and TXT records, preferably with a nice user interface (our current provider has a poor UI and doesn't support TXT records). Is NetworkSolutions a recommended DNS host? I am a little biased in their direction because the service will be free since we already pay them for our domain name. However I'm curious what others have experienced with their service.

  Read the article

• IIS permission configuration issue

  - by Dan

  Sorry the title of this question is a little ambiguous but I don't really have any idea where the issue lies - I'm seeking some clarification of the server error logs. Basically, I had a dedicated server running Windows 2003 and Plesk (v8 I think). Last week the server hardware failed and the entire thing had to be rebuilt from scratch. New hardware was put in, new operating system (Win2008), new Plesk installation (v9.5), new software (MSSQL etc) then all data ported over manually from old C and D drives to restore all 30 client sites. It was hell! All has been okay for a couple of days now but about an hour ago POP! Suddenly all sites went down giving a 500 error. Restarting all services eventually brought everything back online, but I'm now living in total fear. It can - and probably will - happen again. The guys on support gave me the following errors from the server log: The Template Persistent Cache initialization failed for Application Pool 'ASP.NET v4.0 Classic' because of the following error: Could not create a Disk Cache Sub-directory for the Application Pool. The data may have additional error codes.. The worker process for application pool 'domain1.com(domain)(2.0)(pool)' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\domain1.com(domain)(2.0)(pool).config', line number '0'. The data field contains the error code. The worker process for application pool 'PleskControlPanel' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\PleskControlPanel.config', line number '0'. The data field contains the error code. The support guys are so ambiguous about this and it scares me horribly. Can anyone positively identify the cause of this error which lead to all client website going offline? What can be done to prevent it from happening again? Any pointers would be very much appreciated! Thanks folks...

  Read the article

• IIS 7 + Tomcat 7 - how to reach http://localhost:8080/my_app under e.g. http://my_app.local

  - by Sk8erPeter

  In brief: IIS 7 + Apache Tomcat 7 + isapi_redirect.dll: I have a deployed and working Tomcat-application available under http://localhost:8080/my_app. I would like to see the same content under http://my_app.local (and NOT the default Tomcat-site [which you can see below]). How can I do that? Longer explained: I have IIS 7 (7.5.7600.16385) and Apache Tomcat/7.0.22 installed. I deployed an application (let's call it "my_app") in Tomcat, which now can be reached at http://localhost:8080/my_app, works fine. I added a new web site in IIS panel with the path of the Tomcat deployed my_app, which looks like this: "c:\Program Files\Apache Software Foundation\Tomcat 7.0\webapps\my_app" I binded the host name my_app.local. After that, I configured isapi_redirect.dll like this (or that). Now, when I open http://my_app.local, I can see the default Tomcat site (see below). BUT under http://my_app.local I would like to see the same content as under http://localhost:8080/my_app. How can I do that? Thank you very much in advance!! my config files: isapi_redirect.properties (I made a dir junction to c:\tomcat, so this also works :) ) workers.properties uriworkermap.properties rewrites.properties (empty)

  Read the article

• Media Center setup won't complete for watching TV

  - by Robert

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. This problem occurs on all channels, live or recorded. The bottom 5th of the screen is solid green. I know the problem is Media Center because I can use Pinnacle's TVCenterPro to watch TV and there is no skipping/pausing (and not green on bottom). I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing TV okay (with the new DirecTV) before I tried to run setup. (I ran setup to try to do recording with Media Center.) Hardware/Software: Pinnacle PCTV 800i HD PCI card (coax cable from DirecTV tuner), ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• Windows XP corrupts registry every several hours

  - by Ilya Kazakevich

  There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

  Read the article

• Windows XP corrupts registry every several hours

  - by Ilya Kazakevich

  There is a Dell XPS 400 with Windows Media Center installer. It is installed on RAID (Intel Matrix Storage) which is built-in chipset south bridge. Raid has two 150 Gb WDC drivers connected as mirror. All drivers and updates are installed( sp3 and so on). A week ago PC changed its video mode to 256 colors (like VESA mode) and after several moments I got BSOD: c000021a: 0xc0000005 Doctor watson did not create dump although it is installed as default debugger. After reboot it said that config file is missing or corrupted. So, I boot to recovery console and found that registry file (config) is so small. I've replaced it with one from recovery point and windows booted sucessfully. But after about 3 hrs -- it has crashed again in the same wat! I look in event viewer: is said that Explorer.exe failed to open \global??\DLIAFS. I look in winobj, and found that it is a device. I made "deny from everyone" for this device ACL, and after several hours my windows crashed. I restored registry, boot again and there was no error about DLIAFS. I did full chkdsk and it did not found anything bad. But I found event about error paging to \Harddrive1\D. I do not have pagefile there, but I thought I should check my disk again. Unfortunatelly I cannt use smart tools for RAID, but I downloaded latest software from Intel (it can do the same things like RAID bios can but from windows). It verified my disks, found some errors, fix them, than I rebooted. And it crashed again. I am lost. What (except kernel debugging) could be done here? Thanks

  Read the article

• Is there a way to avoid Wacom Control Panel to stop showing in certain cases ?

  - by S.gfx

  This is the problem: Suddenly, you double click on desktop wacom tablet settings icon, and it wont show the dialog. It appears to be loaded as it's shown down in the windows taskbar. I suspect is caused by change of resolution or some setting, maybe suddenly it sets the origin of the panel dialog at some 3000 thosand pixels to the right or something. I have digged that wacom_tablet.dat file to see if I fix it changing some value there, but looks like a log, a history, more than a ini for settings... And anyway does not solve it. My solution is having always a very complete settings file done and backed up to restore (with wacom utility for this, which in previous driver versions did not exist) when this happens, but is counter productive: You change the settings even per each project(and software) needs. I have seen it happenning with Cintiq 12", intuos4 A6, Graphires, Intuos 1. Is just me, doing something weird every time? I doubt it, is normal use, I am amazed that seems no one else had this prob(or nobody asked), happens often with typical use. Maybe is because am setting a shortcut in the desktop? Weird as it works perfect till some random moment... (Have digged Wacom's forums and FAQs, then here, but nothing related to it... Neither in "related questions".) The thing happens in Win XP, 7, etc. Done so during years in my experience, and several times at work, which is worse.

  Read the article

• How to fix massive lag on ZyXEL HomePlug AV powerline adapters?

  - by Tim Abell

  I have 3 ZyXEL Homeplug AV powerline adapters as per the one in the review below. I have two plugged in currently, one into my Be / Thompson wireless router, and one into my desktop pc (box1). every now and then the link indicator on the adapters (the mains link, not the ethernet link) goes nutty, and performance falls off a cliff (see below). http://www.gadgetspeak.com/gadget/article.rhtm/753/479266/ZyXEL_PowerLine_HomePlug_AV_PLA401.html 64 bytes from box1 (192.168.1.101): icmp_seq=1064 ttl=64 time=996 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1065 ttl=64 time=549 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1066 ttl=64 time=6.15 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1067 ttl=64 time=1400 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1068 ttl=64 time=812 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1069 ttl=64 time=11.1 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1070 ttl=64 time=1185 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1071 ttl=64 time=501 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1072 ttl=64 time=1975 ms 64 bytes from box1 (192.168.1.101): icmp_seq=1073 ttl=64 time=970 ms ^C --- box1 ping statistics --- 1074 packets transmitted, 394 received, +487 errors, 63% packet loss, time 1082497ms rtt min/avg/max/mdev = 5.945/598.452/3526.454/639.768 ms, pipe 4 Any idea how to diagnose/fix? I'm on linux so installing the windoze software that came with them is not something I'm terribly keen to do.

  Read the article

• Synchronizing files between Linux servers, through FTP

  - by Daniel Magliola

  I have the following configuration of servers: 1 central linux server, a VPS 8 satellite linux servers, "crappy shared hostings" I have a bunch of files that I need to have in all servers. Right now i'm copying them everywhere manually, but I want to be able to copy them to the central server, and then have a scheduled process that runs every now and then and synchronizes them (only outwardly, no need to try to find "new" files in the satellite servers). There are a couple of catches though: I can't have any custom software in the satellite servers, or do strange command line things that'll auto connect to them and send the files directly. I know this is the way these kinds of things are normally done, but the satellite servers are crappy shared hosting ones where I have absolutely no control over anything. I need to send the files over FTP I also need to have, in my central server, a list of the files that are available in each of the satellite servers, to make sure they are ready before I send traffic to them. If I were to do this manually, the steps would be: get the list of files in a satellite server compare to my own, and send the files that are missing get the list of files again, and store it in my central database. I'd like to know what tools are out there that can alleviate as much of this as possible, first the syncing, and then the "getting the list of files available in the other server". I'm going to be doing everything from PHP, not sure if there are good tools to "use FTP from PHP", which i'm pretty sure i'll have to do for step 3 at least. Thanks in advance for any ideas! Daniel

  Read the article

• What's the lowest cost, legal, Microsoft server stack you can assemble?

  - by McKAMEY

  Assuming that you have an app infrastructure that generally only requires: ASP.NET MVC / C# / .NET Database or NoSQL data store (must be accessible from C#) Here's the challenge to you server gods: What is the least expensive configuration that will allow you to deploy to production in a way that doesn't break any licensing rules? In what ways does this solution differ from the "standard" Microsoft deployment scenario? Where does this solution's performance break down once the app begins to scale? I'm not concerned about the hardware, only the server software itself. I would love to hear about any solutions you've personally put into production. Especially if they are unique alternatives. For ideas, consider some of the possible variations, a) any Microsoft server solutions where they have lowered the barrier to entry to compete with OSS, or b) any OSS alternatives to Microsoft products which perform at a similar level. An example of a): SQL Server 2008 Express Edition SP1 is a 100% free version of SQL Server which will scale to the needs of many smaller / early stage applications. An example of b): running the Mono Framework on Linux. An example of differing from the "standard" stack: running Mono on Linux will require a completely different server OS familiarity. None of the Windows-based knowledge really transfers. An example of breaking down under scale: SQL Server Express will only scale to 1GB of memory and 4GB of disk storage. After that point, the application will need to move to one of the paid versions of SQL Server.

  Read the article

• Alternatives to using email (in particular, Outlook) as a knowledge store?

  - by Umber Ferrule

  I suspect that, like many people, I use my work email account (accessed via Outlook 2007) to store information. I generally try to group similar things in folders and sub-folders, but with a multitude of folders this gets very unwieldy. In particular, it can be a bind to locate things using Outlook's tree structure. (As an aside: I've yet to come across a good free search add-on for Outlook.) I realise Outlook is not the best place to store all my information and I'd prefer not to. In an ideal world I'd like to be able to organise all of the information stored in Outlook in a MindMap (my software of choice being Freemind) or Wiki. To maintain an email audit-trail, I've considered saving individual emails as files using a MindMap or Wiki to link them. What do people think of this? (I can't say I relish the thought of the exporting process!) Whatever I do is going to involve some pain (i.e. setting up a Wiki/MindMap) or sticking with what Outlook provides currently. Has anyone been in the same position? Has anyone mass-migrated information from Outlook? If so, what was the best way? Any ideas or alternative proposals?

  Read the article

• How to move Mdadm RAID drive (EBS based) to different AWS Instance

  - by Stanley

  We have a media-rich web application that is hosted on AWS. We have several Web Servers and we have an NFS server. On the NFS server (Linux server) we have several EBS volumes that are mounted and we've used mdadm to implement the different mounted volumes as a single RAID volume. The Web Servers simply access the NFS storage through a mount point. Amazon has now let us know that they will be performing power maintenance on this server in a couple of days time. Since all our media is on here it would render our site unusable for the hours while Amazon is working on it. We want to try and prevent this downtime. I was thinking that we can prevent server downtime by perhaps setting up a new server temporarily and attaching the EBS drives (raid volume) to that server and have our web servers point there during maintenance. This is a very high risk operation since this involves several terabytes of our production data. What would be the safe way to move over our logical raid drive (md0) to a new amazon instance? I was hoping that I could start with building the new server, mounting the ebs volumes and assembling the RAID partition using mdadm --assemble --scan before unmounting from the existing instance so that I can first test that everything works and thus having it mounted on two instances at the same time, but I don't believe that is possible with the way that filesystems work. How do I move a Linux software RAID to a new machine? suggests a way to move drives, but isn't really a cloud-based question. Perhaps there are simpler ways to prevent system downtime with our solution being hosted on the cloud? I have considered taking an EBS snapshot, but that tries to replicate all the many terabytes of mounted storage, so this is not a practical solution. Any ideas?

  Read the article

• Simulate SNMP traps to test surveillance

  - by jishi

  I'm trying to use Net-SNMP on Windows to emulate a trap that should trigger an alarm on our surveillance system. This is the setup: Windows 7 client that sends the trap Net-SNMP as software for sending the trap Linux with Adventnet ManageEngine OpManager as NMS (not relevant) This is what I'm trying to accomplish send trap with OID .1.3.6.1.4.1.5089.1.0.1 (according to the MIB I have loaded into my NMS) and just some sort of message into it to see if I can get any alarm in my NMS. I can see that I actually send a trap in my firewall, but I have no idea what it contains. This is my attempt so far: snmptrap.exe -v 2c -c xxxxxxx 192.168.100.65 '' 6 0 .1.3.6.1.4.1.5089.1.0.1 s "123456" However, I can't seem to find any reasonable documentation with examples for snmptrap. Basically, I need to know what: '' <- why do I need this? I can omit it and it will still send a trap 6 <- Enterprise gneric trap, I assume. Is this correct? 0 <- I have no idea, I need some sort of value for this .1.3.6.1.4.1.5089.1.0.1 <- the enterprise specific OID I assume, should this be followed by some more numbers s <- indicates string "123456" <- just a random test-string... This doesn't make much sense to me, and if anyone can shed some light on this I would be very grateful.

  Read the article

• Google Chrome doesn't want to access Facebook

  - by Pieter van Niekerk

  I have been experiencing a bit of a problem with Chrome over the last couple of days where it doesn't want to access Facebook. When I open Chrome it works fine for a while and then if I were to refresh the page it would give me the Chrome 'This webpage is not available' message. This webpage is not available Google Chrome could not load the webpage because www.facebook.com took too long to respond. The website may be down, or you may be experiencing issues with your Internet connection. Here are some suggestions: Reload this webpage later. Check your Internet connection. Restart any router, modem, or other network devices you may be using. Add Google Chrome as a permitted program in your firewall's or antivirus software's settings. If it is already a permitted program, try deleting it from the list of permitted programs and adding it again. If you use a proxy server, check your proxy settings or contact your network administrator to make sure the proxy server is working. If you don't believe you should be using a proxy server, adjust your proxy settings: Go to the wrench menu Options Under the Hood Change proxy settings... LAN Settings and deselect the "Use a proxy server for your LAN" checkbox. This problem only persists when using the proxy and doesn't occur at all when not on the proxy. I have also tried different browsers (IE9 and Firefox 9.01) but it doesn't occur in any of them. This problem goes away for a while when I restart Chrome, only to happen again a couple of minutes later. I have tried deleting the cookies for Facebook without restarting Chrome, but to no avail. I am using Windows7 with Chrome 17

  Read the article

• Free/opensource application for charting stock prices?

  - by Homunculus Reticulli

  I am looking for a free or FOSS software application for SIMPLY charting stock prices. I am not interested in any of the other nonsense typically bundled with such packages (technical analysis, back testing, tracking etc, etc). All I want to do is the following: Import file from CSV and plot on the chart Ability to scroll the chart left/right (zoom feature would be nice to) Ability to draw straight line (between 2 points) on the plot Ability to plot the graph for different resolutions (for e.g weekly, monthly - or some other custom resolution that I want) print the displayed graph (I can always use screen capture if printing is too much to ask) Thats all I want to do. I am not interested in anything else. I would have thought I could have found something by now. I would have written my own tool (I still will do that at a later stage), but I am a bit short of time at the moment, so I just want something that will do all of the above. Can anyone recommend a package. Last but not the least, I am running on Linux (and would prefer to do so - BUT if I have to, I can run on ahem - you know, Windows)

  Read the article

• Saving a file in a CSV type in Excel always removes the BOM

  - by rickp

  I've been trying to find a reasonable solution/explanation (unsuccessfully) to find out why Excel defaults to removing the BOM when saving a file to the CSV type. Please forgive me if you find this a duplicate of this question. This handles reading CSV files with non-ASCII encoding, but it doesn't cover saving the file back out (which is where the biggest issue lies). Here is my current situation (which I'm going to gather is common among localized software dealing with Unicode characters and a CSV format): We export data to a CSV format using UTF-16LE, ensuring the BOM is set (0xFFFE). We validate after the file is generated with a Hex editor to ensure it was set correctly. Open the file in Excel (for this example we're exporting Japanese characters) and witness that Excel handles loading the file with the correct encoding. Attempts to save this file will prompt you with a warning message indicating that the file may contain features that may not be compatible with Unicode encoding, but asks if you'd like to save anyway. If you select the Save As dialog, it will immediately ask you to save the file as "Unicode Text" rather than CSV. If you select the "CSV" extension and save the file it removes the BOM (obviously along with all the Japanese characters). Why would this happen? Is there a solution to this problem, or is this a known 'bug'/limitation of Excel? Additionally (as a side issue) it appears that Excel, when loading UTF-16LE encoded CSV files, only uses TAB delimiters. Again, is this another known 'bug'/limitation of Excel?

  Read the article

< Previous Page | 703 704 705 706 707 708 709 710 711 712 713 714  | Next Page >