Search Results

Search found 11126 results on 446 pages for 'hardware requirements'.

Page 71/446 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

  • sata2 hdd not reported correctly on gigabyte mobo

    - by hyperboreean
    hey guys, I have a gigabyte ga-k8nmf-9 mobo which has both sata 1 and sata 2 support. Until a few hours ago I had a samsung 160gb sata 1 hdd which worked ok until it failed. I bought a wd se16 caviar, 500 gb, 7200 rpm, 16 mb cache, but it seems that it's not properly detected by my computer - it's only showing 137 GB out of 500. I tried a BIOS update (to F10e) and it's still doing the same thing. I've altered BIOS settings to use only sata (no ide) and many other settings, but nothing worked. Any help will be greatly appreciated Update on this one: it seems that the previous hdd was doing the same thing, though I didn't notice because it was approximately the same size

    Read the article

  • How cpu writes data to dynamic RAM

    - by Krit
    Hello, I would like to know what kind of electrical signals does a cpu send to a dynamic RAM when it wants to write one bit (a 1 or 0). Is it simply that cpu sends just a single electric pulse, and if that electric pulse's voltage is higher than a certain level, it charges the capacitor to a voltage level that is "1" and if it is at a lower voltage band, it charges capacitor to level that it is "0"?

    Read the article

  • Proper way to connect SATA and IDE Hard drives together?

    - by Bartek
    I have an old IDE hard drive that has a broken Windows install on it. It just won't boot up, and I've tried a variety of solutions. That's fine, I really just need a few files on the hard drive. I have a computer that uses a SATA connected hard drive. It's a working PC. I would like to connect the old IDE hard drive to that compute and basically browse through the file system, grab the files, and copy them to my existing computer. My problem is with my few attempts to connect the IDE drive I would get Boot Disk Failures and so forth. I guess it's trying to boot from the IDE but I'm not really sure. Any help would be appreciated, Thanks!

    Read the article

  • Is there a peripheral that lets my computer monitor the connectivity of pairs of wires?

    - by raldi
    I've got a bunch of physical switches and circuits that act like switches (they're either connected to ground or they're just an open wire). Is there some sort of thing I can plug into my computer (ideally, via USB) that has a bunch of screw terminals, and I can attach wires to the screws and have the computer keep track of which circuits are closed and which are open? Bonus points if the device also lets the computer open and close switches, too. I don't even know what to google for.

    Read the article

  • Formatting a 5.25" floppy disk

    - by Spütnik
    So after the massive trouble of finding a 5.25" floppy drive and a connecting it up, then changing the BIOS so it's set as my A: drive, I tried to format a couple of high-density 1.2MB floppy disks using the "format A:" command in Command Prompt. Both times it formatted only 160KB and left it at that. If I then check the amount of space on those disks, it then comes up as 160KB. Why is this the case? How can I get my the full value out of my 1.2MB? For reference, I have a Mitsubishi MF504C-318UG, which should support 1.2MB disks.

    Read the article

  • Weird RAM Upgrade Experience

    - by Axel Isouard
    I have a laptop, HP EliteBook 8540p having originally 4GB RAM and I've recently bought Corsair Value Select SO-DIMM 16 Go (2x 8 Go) DDR3 1333 MHz. It fits the required RAM specifications perfectly, and once I've inserted them, the BIOS recognizes the memory correctly, but my linux Gentoo running on kernel 3.1.6 SMP x86_64 crashes immediately when I'm running an app which consumes a lot of memory. The laptop crashes as if there's no more battery left, when the memory reaches at least 6000MB ram. Windows 7 doesn't want to run anymore, it shows a blue screen with the IRQ LESS OR EQUAL error if I set 8GB, and it doesn't boot at all if I set 16GB. Is there something I could do to fix this please ?

    Read the article

  • How to build a cheap and fanless server

    - by dag729
    Any advice about how to build a cheap and fanless server? It's main uses would be web and file servering, but it could be a day when I'd like to add some streaming and mailing capabilities as well. OS of choice: GNU/Linux Thanks in advance

    Read the article

  • I think my laptop just died

    - by Joel Coehoorn
    I have a Dell 1330M that as of about 15 minutes ago will no longer POST. What happened was I was working, stepped away for a moment, and when I came back it was turned off. I thought that was odd, but turned it on and things seemed fine. About 1/2 hour later it crashed and restarted, but came up fine again. It did this once more. At this point I was starting to get worried, but I hadn't had any problems with the laptop before and every crash was after doing some work in a virtual machine that I don't often use, so I at put the blame there. It didn't feel like it was overheating anywhere and there's no ozone smell of overheated electronics. Then it crashed a final time and now when I turn it on all I see is a bright screen with a bunch of vertical lines (noise). I've tried removing the memory sticks one at a time, but I get the same result with either memory stick in either slot. With no memory at all it stops earlier in the POST process and the screen is completely blank (black, no backlight). As I type this, I hear a double beep from the system about once every 10 minutes. I'm pretty sure the hard drive is fine because it fails during post, before anything off the drive is needed. The power supply seems good because the screen is nice and bright. It's not the RAM because swapping that around made no difference. The leaves motherboard (which I doubt and can replace) and CPU (which just might be changable). Any ideas? Is there any hope for this laptop? I'm rather fond of it and I'd have a hard time replacing it with anything near as nice.

    Read the article

  • How to redirect sound to USB headset when plugged in?

    - by LM
    I often have to switch between audio output from my speakers and my headset (P5Q mobo with integrated sound and Microsoft headset). I've already got it so that when my headset is plugged in, sound will be played through it, and if it isn't, sound will play through my speakers. The problem is that if I have a game or similar program started while my headset is plugged in, if I unplug it, I will get no sound. Also, if I start the program with no headset, and plug it in, I get sound still through speakers. Is there any way to do this?

    Read the article

  • MacBook battery MA681LL/A or MA348G/A.

    - by alexarsh
    I need to buy A1175 battery for my macbook 15''. Which one should I buy: MA681LL/A or MA348G/A? Which one is better? I remember it was an issue with A1175 batteries. And then apple replaced the batteries that hold about year or two to another batteries that hold about 4 years. I just don't remember which is which.

    Read the article

  • Can I create a virtual network interface to connect to a real network device?

    - by michelemarcon
    I have a networked windows pc with 2 network interfaces. The first connects to a lan with ip address 10.1.. The second connects to another lan with ip address 10.2.. Maybe it's a dumb question, however is it possible to virtualize the second network interface, so that the pc can connect to the 2 lans? If necessary, I may switch to linux or paravirtualization. CLARIFICATION: I want to send DHCP broadcast packets on the second lan, but not on the first lan. I want to do it with one single physical network interface. At the moment, I'm not using any virtualization software.

    Read the article

  • Server responses "bus error" to every command

    - by Temnovit
    I have a linux machine dedicated to MySQL server with a pretty high load. Today I woke up and was terrified to see, that database server is down. I could connect to it via SSH, but it was responding with bus error to each and every command. [root@r1304 home]# ls Bus error [root@r1304 home]# tail /var/log/messages Bus error [root@r1304 home]# reboot Bus error [root@r1304 home]# free -m Bus error [root@r1304 home]# chkdisk Bus error I went to Data Center and did a hard reset, which seemed to help, but after a half an hour situation reapeated and now I can't even connet via SSH anymore. Any ideas what this could be? how to diagnose such a problem and what are possible fixes? Server has 32 GB RAM, 2xSSD drives with software RAID UPDATE According to Zabbix, when MySQL died, number of processes stated to increase drammaticaly, until I did a hard reset. What could those be? Number of processes

    Read the article

  • Asus Eee replacement netbook monitor doesn't fit connector

    - by Michael Morisy
    I bought a replacement screen for an Asus Eee netbook 1005HA from a company that said the screen they were selling was compatible, but the connector on the replacement is smaller than the original. I've scoured the net for instructions, but so far, I'm out of luck. As far as I can tell, they both have 32 pins, but maybe I'm missing a connector? The replacement is a [LG Philips 10.1 inchs Glossy LED Panel Screen][1]. Picture of two connectors I couldn't include due to low rep. The replacement is on the left.

    Read the article

  • Windows Server 2008 R2 Maximum Processor Limit Confusion

    - by Stevoni
    As I was looking through the Windows Server 2008 R2 specifications, I saw that the maximum supported processors is 64 sockets for Datacenter addition. This puts the maximum number or cores at 256 (if all sockets are quad cores), which I think it's just silly, but whatever. And now the questions: How does one set something like that up? (Obviously not for me, but humor me) Are there multiple dual socket motherboards running in a giant case with a ton of memory? How does the OS see all of the CPUs if they're on different boards? What would be a real world example of a need to have 64 sockets attached to one operating system vs 32 2 socket servers?

    Read the article

  • PC powers up but there is no display

    - by Matthew
    I built a computer with standard components I bought from Newegg about three years ago. It ran great for 2 years and has sat powered down for the last year. I tried to power it up today and the display was blank. It powers up, lights come on, drives start spinning but there is nothing on the display. I verified that the monitor and video adapter work. I also tried the video adapter in a different slot on the mother board with no luck. What's the next thing I should try? Is the mother board shot? Thanks.

    Read the article

  • Is there way to enable 4 GB RAM in 32-bit Windows OS?

    - by Wahid Bitar
    I upgraded my PC to 4 GB RAM and I get only 3 GB. Windows 7 32-Bit consider that I've 4 GB RAM but didn't use more than 3 GB. Someone told me that MS Windows 32-bit doesn't support RAM larger than 3 GB. So please is there any way to make my OS "Windows 7 32-Bit" support more than 3 GB RAM ? *`Note: I can't move to 64-bit because I've many program doesn't work with a 64-bit OS. Edit:: I tried what Mr. Wonsungi advised me but whenever I check this option: Enable support for 4 GB of RAM I get the following error: 'Cannot access to the registry key HKEY_CLASSES_ROOT\CLSID\{E88DCCE0-11d1-A9F0-00AA0060FA31}.' There is no "CLSID" in my registry, I don't know why!.

    Read the article

  • Where can I find this HP modular keyboard or similar?

    - by Chaos Whistler
    I'm looking for an HP USB 104-Key Modular Keyboard with Detachable Number Pad (model number is DT530A, I believe), shown at this online store, where it's quite cheap but is sadly sold out. I've searched for hours on Google, and I've found several - the problem is they're Spanish or Greek keyboards but I need one in English (US keys preferred)! I would also be happy with a keyboard which is not exactly this but is similar, either with a detachable keypad or with no keypad at all, as long as the keyboard key layout and positioning is the same as on a standard keyboard. Can you help me find such a keyboard?

    Read the article

  • What's the most durable netbook

    - by Keyslinger
    I'm about to spend more than two years in Latin America and I know from experience that not all computer equipment can handle the shifts temperature, air moisture, and other atmospheric variables as well as the generally greater number of shocks and jostles presented by developing-world transportation and unstable infrastructure/power grid. Is there any particular manufacturer, brand, or model of netbook or notebook that stands above the rest in terms of durability and ability to survive in harsh environments?

    Read the article

  • Computer keeps restarting [closed]

    - by Joris
    I have a strange problem with my desktop pc, when I start it, it just restarts immediately, it displays the bios/motherboard logo and then restarts. I can't access the bios to edit settings because it restarts to fast. Then I tried different things to fix it with mixed success. (I also tried to reset the bios without success) I noticed that a capacity from the graphics card was broken (it looked exploded) so I ordered a new graphics card & plugged it in the computer. It didn't change much, still the same problem. Then I unplugged everything that's not necessary and put only 1Gig RAM in the motherboard (usually it has 4 x 1Gig RAM) and the computer started, then I putted another gig of RAM and the computer still started. (starting=booting windows) When I putted in the 3th RAM it didn't boot anymore (again restarting all the time) so I removed this 3th gig of RAM and this is where it gets weird. I expected the computer to boot again because it is exactly the same configuration as before - which worked - but the computer didn't want to start. It just gave the same problem as before (restarting all the time.. ) Anyone an idea what might be wrong?

    Read the article

  • What GTX 285 should I choose?

    - by Thomaschaaf
    I'm trying to buy a graphics card and the GTX 285 models seem to be in the right pricerange. A friend of mine suggested me the ZOTAC GeForce GTX 285 over the XFX Black Editon. Which card maker and edition would you choose? Is the AMP! a good decision for the ZOTAC?

    Read the article

  • How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xubuntu?

    - by atticus
    I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83 I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

    Read the article

  • Windows Mobile 7 corporate device...

    - by Toymaker
    Does anyone know of a Windows Mobile 7 device aimed at business use? I’m looking for something with bar code scanning capability. Psion, hand held, and honeywell only offer 6.5 at the moment. Granted, Windows Mobile 7 just barely came out and these sorts of devices usually lag a bit behind consumer toys...but hopefully someone can help.

    Read the article

  • Starting old computer - nothing shown on screen at boot

    - by Jonas
    I'm trying to start an about 10 years old PC computer. But nothing is shown on the screen, and it beeps everytime I press a key on the keyboard. I can press Ctrl+Alt+Del to reboot the computer. The monitor is newer and seem to work with other computers. I don't see anything from POST/BIOS at start or later. I have tried to change to another graphic card, but it didn't change anything. What can I do to solve this problem? Update: I have now tried with another computer (the one where the "another graphic card" came from) and I got the same problem. I doesn't show anything on the screen. Both these computers had a GeForce2 MX 400 graphic card. I tried with another computer screen it didn't work - it was showing "signal out of range". So is the graphic card GeForce2 MX 400 too old for newer TFT-monitors? I tried with a third computer so I know that the monitors are working, and both monitors work fine with that computer.

    Read the article

  • Shuttle FB51 mobo does not boot with external USB drive attached [closed]

    - by user127236
    I am repurposing an old Alienware desktop as a home media server. The PC is based on the Shuttle FB51 motherboard. The BIOS is a Phoenix Version 6.00 PG, release date 12/16/2002. I have loaded Ubuntu 12.04 LTS on the internal hard drive. I am using a Western Digital WD Elements 1.5 TB USB 2.0 Desktop External Hard Drive for media storage. When the external drive is plugged in and the PC is powered on, it freezes very early in the BIOS self-test, even before it begins the memory test. If I unplug the drive, the self-test proceeds without further problems. I can plug the USB drive back in when the self-test is complete, and Ubuntu will boot and find the external drive normally. I've tried several changes to the BIOS setup without finding a cure for the boot issue. Any assistance gratefully accepted. JGB

    Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >