Search Results

Search found 20904 results on 837 pages for 'disk performance'.

Page 711/837 | < Previous Page | 707 708 709 710 711 712 713 714 715 716 717 718  | Next Page >

• Windows 7 Loading Very Slow

  - by Adnan

  Hi guys, I've had a problem that only started to occur yesterday. When I boot into Windows 7 and log on to my user account, the computer gets very laggy and slow for at least 5 minutes. Icons take ages to load, and everything is rendered unclickable. This happens for about five minutes after which everything goes back to normal. I tried restarting a few times to see if this is a recurring problem, and it is. I ran a full system scan with Microsoft Security Essentials and found nothing wrong, and I also defragmented the disk to increase performance. However, the problem still exists. Edit: For the past day, I've been trying to install Ubuntu on the same laptop. When installing it on a partition didn't work, I decided to use Wubi. Could this somehow be the problem? Also, my hard drive gets hot a lot, so could the heat be affecting the hard drive and maybe making it defective? Any help on this issue would be greatly, greatly appreciated.

  Read the article

• COMPAQ Tower No Signal to monitor

  - by Lancelot

  Hi there, I have had some troubles with this: I received a compaq tower: Compaq Presario SR1224NX Onboard VGA Windows XP SP2 from a friend. It was given to me on condition i give her the files back. My plan was to turn this into an Ubuntu Server. It booted up no problems even with the ubuntu live disc. After a normal shutdown(not unpluggin the power cord and not doing a hard shutdown with the power button), it would not restart even after SEVERAL attempts. I realized the light next to the power supply would flash very rapidly. I researched and found out it was one of two things: a dead power supply or the cables to the motherboard and to the disks etc. Thus i checked to ensure the cables were fine(and they were). I purchased a Power Supply (this one has 400 watts, the initial had 250) and installed it. The tower now boots. It booted into the live disk and everything. After a normal shutdown, it now restarts but is not sending signal to my monitor. I have tried several monitors in which i assure work perfectly but not with this tower(i recall it did show display after replacing the power supply). The monitors are ACER. This is different than most "no Signal" problems since i am not using an external Video Card, this is onboard VGA. Thanks!

  Read the article

• how to properly set environment variables

  - by avorum

  I've recently started using Windows (having used Ubuntu up until now) and I find myself unable to properly set environment variables. Whenever I set them they don't seem to work. I've been going to Start-Edit Environment Variables for your Account and editing the PATH value in the upper half of the GUI. Here's what I've got so far. ;C:\Chocolatey\bin;C:\tools\mysql\current\bin;C:\Program Files (x86)\Git\bin;C:\Program Files\MySQL\MySQL Server 5.6\bin\;C:\Python33\Scripts; These are each the parent directories of the executables I'd like to be able to run by name from CMD, but mysql, git, and pip aren't being recognized. Am I doing something wrong syntactically or at a general understanding level? I'd like to be able to run these commands without having to specify the full path to the executables every time. EDIT: The full PATH extracted from CMD PATH=C:\Python33\;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files (x86)\AMD APP\bin\x86_64;C:\Program Files (x86)\AMD APP\bin\x86;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\GTK2-Runtime\bin;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\;C:\Program Files\Microsoft SQL Server\110\Tools\Binn\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Program Files (x86)\Java\jre7\bin;C:\Program Files (x86)\Windows Kits\8.1\Windows Performance Toolkit\;C:\Program Files (x86)\Microsoft SDKs\TypeScript\;C:\Program Files (x86)\MySQL\MySQL Utilities 1.3.4\; ;C:\Chocolatey\bin;C:\tools\mysql\current\bin I'm being forced to use Windows by my work environment, I don't enjoy the state of affairs.

  Read the article

• Streaming to PS3 with NAS and built-in dlna server?

  - by philt

  With consumer-grade hardware, is it possible to successfully stream 1080p mp4 videos to a PS3? I have a linksys router that can only do 10/100. The PS3 is wired to it with cat5e cable, and the PS3 itself supports gigabit ethernet. I would upgrade the router and get one that supports gigabit ethernet if it could handle streaming like this. It currently does work with minor jerkiness streaming from my mac to the PS3, but fast-forward/reverse and "goto" (equivalent of scene selection) take forever and/or fail completely. And streaming from my mac of course requires the mac to be on at all times. When I put the movies on an external USB drive and connect to the PS3 directly, it performs flawlessly. Fast forward and everything works great. So I was thinking about getting a NAS, but I don't know if any inexpensive NAS (i.e. Buffalo Linkstation Live, WD My Book World Edition, D-Link DNS-321, etc.) can actually deliver the performance necessary to do this, even with gigabit ethernet?

  Read the article

• Windows 7 boot failure after update

  - by Jake

  Installed some windows 7 updates today, mostly just optional fixes and it installed an update to my IntelliType or IntelliPoint drivers (Keyboard & Mouse). It asked to reboot, computer gets to the windows load screen and redirects to the repair utility. Repair utility failed, it said if I recently installed a device, unplug it and try to restart. So I unplugged my keyboard and mouse, restarted. Nothing. I noticed that all the errors seemed to be Windows 7 thinking the installation was on another one of my slave drives. For example, my windows installation is on C:, but I have other drives, like G:, X:, etc... So it said "Critical Boot File G:\Windows\system32\drivers\amdxata.sys is corrupt, but why not C:\ ? So I unplugged ALL other hard drives, it still tried loading X:, even though the only one plugged in was C: I have the windows disk, but that didn't seem to help. I was thinking I need to fix my boot.ini or something simple like that was corrupt, the hard drives seem fine. I'm screwed, it's finals week.

  Read the article

• Web Server Routing Based On Location

  - by Eric

  I have a website that has users from both Hong Kong and Australia. Unfortunately, since the server is located in Australia, users from Hong Kong are going to suffer latency problems. Traffic has to go through US before travelling back to Australia. So I've setup a server in Hong Kong as well, and users using the .hk TLD are going to be redirected to the Hong Kong web server. It shares the same database server with the Australian server but due to aggressive SQL query caching, impact on performance from latency from SQL queries are negligible. But for users accustomed to the Hong Kong website but have since traveled to Australia, they suffer from additional latency because they go to the .hk site which redirects to the HK server even when they're in Australia. The website is targeted at international students from Hong Kong so this is an significant issue for me. Instead of redirecting users to the closest web server based on the TLD, how do I redirect users based on their location? Currently I am using nginx, postgres and Django. Say I know how to estimate users' location based on users' IP addresses, what is my next step? At what level would I work on? What topic should I read up?

  Read the article

• How much memory will a Windows file-server be able to use effectively.

  - by Zoredache

  In the near future we will be moving our fileserver to a newer box that will be running Windows 2008R2. I want to know how much memory Windows will be able to use for a system that is just a file-server. In searching around I found an old document for Windows 2000 that mentions the maximum size of the file-system cache is 960MB. I suspect this limit no longer applies, but is there a new limit? The file server will be just a standard Windows fileserver. It will have 1TB of attached storage. The large majority of the of the files accessed during the day are just typical Office documents. There are 80-100 people usually using the fileserver during a typical day. This system will only be used as a file server, it doesn't have any other roles. In Windows 2008r2 is there any hard limits for the filesystem cache? What are they? The server we will be re-using for this purpose currently has 4GB of memory, but it can be maxed out at 16GB. Is there any value in doing this for a Windows file-server? Are there any performance counters can I look at on the existing 2003 fileserver that will tell me if adding more memory will be worthwhile.

  Read the article

• Seeking web-based FTP client for very large file upload

  - by Paul M. Nguyen

  I have looked around for these for some time... the limits imposed by the web server and/or the dynamic programming environment (e.g. PHP) are far too restrictive for the application I'm working on. We need to be able to move large graphics and video files to and from clients (ranging from tens of MB to a few GB in a single file). Plain FTP with a proper desktop client will do the trick, and we're hosting this in Amazon EC2 with EBS. User management will be done from the office via webmin. Users are chroot-jailed into their home dir by proftpd. net2ftp will work for many clients, but we often need to move single files that approach 1GB or exceed 2-3GB which is way out of the range of any http-based uploader. So we turn to Java or Flash - can they do it? From within the web browser establish an FTP connection and grab a huge file? There are licensed applets and such out there, but none seem convincing. Again, I'm looking for some code that can speak FTP and read (& write?) the local disk, that is delivered in a web browser, and can move single files of 2GB+. The reason for having a web-based interface to FTP is to skip the software installation step for our clients. I will consider proper desktop client software as long as it's "portable" and at least Win+Mac and can be easily configured by lay-man users in a hurry.

  Read the article

• Physical-to-virtual for personal use

  - by Journeyman Geek

  One of my current projects involves reducing the number of old computers lying around. So far, the office systems have been downsized from 5 to 2. One system which had no data on it was dumped entirely, while three other identical boxes were consolidated into to one (I swap hard drives as needed and they just work(tm)). I want to make further cuts. The physical systems in question all run windows xp sp3, and were old Pentium 4s with 256 MB of RAM. Currently, I have got a VirtualBox running on another system. My intention is to migrate all services to that. We can assume that disk space and RAM on the host is not an issue. I'd rather not go with a client-server physical-to-virtual (P2V) method like what VirtualBox uses now. I have a few specific concerns as well - specifically whether I'd need to reactivate or sysprep for dissimilar hardware first. An offline tool for imaging (Windows or Linux) would not be an issue since the drives could be mounted onto another system I have anyway or I could use a LiveCD. What would be my options for P2V conversion, and what would I need to keep in mind when doing this?

  Read the article

• What is Best storage servers infrastructure ? DAS/NAS/SAN or installing GlusterFS/LUSTER/HDFS/RBDB

  - by TORr0t

  I am trying to design an infrastucture for the project I am working on. It would be somehow a file-sharing/downloading project (like rapidshare) and I would need high storage sizes and good scability, and I would add new storage nodes after my project grows up. I have come up with 3 solutions for my project which are using Luster, GlusterFS, HDFS, RDBD. For start, i would have 2 servers, one server is for glusterfs client + webserver + db server+ a streaming server, and the other server is gluster storage node. (After sometime, i would be adding more node servers, and client servers (dont know how many new client new servers to add, will see later) So, i am thinking to work with glusterfs. But i really wonder that if i have to use high performance servers with high sotrage sizes or avarage/slow servers with high storage sizes? Or nas/das/san solutions are better for glusterfs storage nodes? I might buy a nas and install glusterfs onto it. I would be happy to listen to your recommendations for the server properties (for each clients and nodes) . I really dont know if I really need high amount of ram and good cpus to for the nodes. I am sure i need it for client servers. The files would be streamed as well, so the Automatic file replication is important, thus, my system should work like a cloud, when needed, according to high traffic, the storage nodes should copy the most demanded file to be streamed and would help me to get rid of scability problems and my visitors would able to stream/download those files. Also, i am open to your experiences/thoughts about any good solution. Luster, hdfs, rbdb are the other options and i would be happy to listen to your thoughts here. I would be very very happy to hear back from anyone commented of any words I have used here. Thanks

  Read the article

• [Ubuntu 10.04] mdadm - Can't get RAID5 Array To Start

  - by Matthew Hodgkins

  Hello, after a power failure my RAID array refuses to start. When I boot I have to sudo mdadm --assemble --force /dev/md0 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 /dev/sdf1 /dev/sdg1 to get mdadm to notice the array. Here are the details (after I force assemble). sudo mdadm --misc --detail /dev/md0: /dev/md0: Version : 00.90 Creation Time : Sun Apr 25 01:39:25 2010 Raid Level : raid5 Used Dev Size : 1465135872 (1397.26 GiB 1500.30 GB) Raid Devices : 6 Total Devices : 6 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Jun 17 23:02:38 2010 State : active, Not Started Active Devices : 6 Working Devices : 6 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 128K UUID : 44a8f730:b9bea6ea:3a28392c:12b22235 (local to host hodge-fs) Events : 0.1249691 Number Major Minor RaidDevice State 0 8 65 0 active sync /dev/sde1 1 8 81 1 active sync /dev/sdf1 2 8 97 2 active sync /dev/sdg1 3 8 49 3 active sync /dev/sdd1 4 8 33 4 active sync /dev/sdc1 5 8 17 5 active sync /dev/sdb1 mdadm.conf: # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions /dev/sdb1 /dev/sdb1 # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # definitions of existing MD arrays ARRAY /dev/md0 level=raid5 num-devices=6 UUID=44a8f730:b9bea6ea:3a28392c:12b22235 Any help would be appreciated.

  Read the article

• How long will a USB key with an OS installed on it last?

  - by Xananax

  I've heard numerous times that installing an OS on a USB key is a bad thing to do, as USBs typically have a certain number of writes before dying, and installing an OS on it will wear it out (unless it's used sporadically for rescue purposes). Nonetheless, I am very tempted to install some flavour of Linux (Ubuntu or Arch, I haven't decided yet) on a small, transportable, USB Key. My problem is, although you read a lot that it's "bad", you are never told how bad. How long would it last (provided, say, a pc that is 24/7 on)? A month? A year? Five years? Is there recipes to make it last longer? Is there any reason beside weariness that should prevent me from attempting this? I mean, if it can be calculated, then I could theoretically shield myself by doing regular backups on another key when the deadline gets close (for example). Notes I am not talking of using a USB as a live CD, but actually installing the OS on it.) When I say "USB Key", I refer to the little USBs with a flash memory, not an external USB hard drive. For the curious, my reason is that I work in a lot of different places, on different PCs, and I have a very customized session, with my own WM, my own key bindings, my own scripts, , a selection of plugins for firefox and chrome, etc, and currently I am synchronizing all this through a mix of dropbox, git, and transporting files on USBs, and and it's becoming a chore. It would be much simpler for me to just plug the USB and mount the hard disk of the PC I am using and use it's processing power without actually needing to install any OS on it.

  Read the article

• How do I configure a new (non-OS) raid device under Windows 7?

  - by GregH

  I recently installed 3 new 1TB drives in my Windows 7 (64 bit) system. These are in addition to the 10k rpm disk that I already have running the Windows 7 OS. My intent is to create a RAID 5 volume with the 3 disks. I don't seem to have a problem configuring the bios and creating the resulting 1.9 TB RAID volume. I run in to the problem when I try booting in to Windows. I get a quick flash of a blue screen and then am prompted by windows to do a repair. It tries to repair and then reboots. This sequence lasts indefinitely. If I re-configure the bios back to non-RAID (ACHI) then windows boots fine. The strange thing is that the 1.9 TB volume I configured through the bios actually shows up in windows! Strange since the motherboard is not set up with RAID. I assume that I somehow have to install the RAID drivers from the mobo manufacturer. How do I do this? Is the reason I'm getting the blue screen a result of not having the RAID drivers installed? It's strange because I can find plenty of documentation on how to set up RAID and do a fresh install Windows on to the RAID device, but nothing on how to set up a RAID device on an already running system. Advice is appreciated.

  Read the article

• HyperV - low CPU usage

  - by Klark

  I am very new to HyperV and virtual machine philosophy in general, so please expect more or less nooby questions :) I have a server that is only used as a host for virtual machines. OS is windows server 2008 R2 and it is running on 16 CPU and 48 GBs of RAM. On aforementioned server there are 8 VMs, each having 4 CPUs and 4 GBs of RAM. On those VMs we are running some CPU intensive tasks. Each machine has nearly 100% cpu usage. After I noticed slow performance I went to the host machine and started playing with process explorer. It turned out that cpu usage is very low. Also I/O is very low, and of course, memory consumption is high, which is expected. Of course, I don't expect that those 4 virtual cores dedicated to a VM work as fast as real, hardware 4 cores, but still I expected a higher consumption of real hardware. Is this sort of behaviour normal? I see that the most of CPU usage on host machine are marked as interrupts (which I guess is normal) and all those interrupts are passed to only one core (which is strange). Are there out of box optimization that I could perform to finally use all that processing power that is under the hood. My knowledge of virtualization technology is near to embarrassing, so I would be grateful for any links that could enlightened me :) Thanks.

  Read the article

• What does a status of "Backup" mean for Windows 7 local user profiles?

  - by Howiecamp

  Summary: Upon logging on to Windows 7 RTM I get a message that my profile can't be loaded and a temporary user profile is created. I logged off and back on as Administrator. The user profiles dialog shows my user profile with a Type of "Local" and a Status of "Backup" rather than "Local" which it should be. How can I change this to make my user profile accessible? The long story: My PC has a single hard drive partitioned into a C: and a D:. I'd moved my user profile directory (c:\Users) to d:\Users, removed c:\Users and then used mklink.exe to create a directory symbolic link c:\Users -- d:\Users. Worked like a charm since I did it. Today, I make a System Restore Point for drives C: and D:. Next, I dismounted D: and used the Disk Management tool to remove the "D:" drive letter from the D volume. (My plan was to reboot and then redirect the symbolic link.) Upon reboot, I got the user profile error described above. Finally, I restored the System Restore Points that I'd created for both drives and then rebooted again. Same issue.

  Read the article

• apache 2.4, mod_proxy_fcgi not honouring .htaccess, work around needed

  - by user229874

  I am using apache 2.4.7 with mod_proxy_fcgi for purpose of passing through php to php-fpm (this will be used for shared hosting environment). The htaccess works fine for non php files, but once it hit rewrite rule that proxies through the php requests, the htaccess is ignored. I know why it is happening. The question is: how do I work around it? The question how do I force apache to treat the request to php file as a request to local file, and then proxy it through? I have spent substantial time in researching on this problem, and following "answers" were given as solution: 1) "use apache configuration instead of .htaccess" it is valid solution, but not for shared hosting environment (I am not going to give access to apache configuration to shared hosting customers ;)). 2) "don't use .htaccess, as it has performance/security/other issues", well how else would shared hosting customers control access/url rewriting on their site? Besides if the .htaccess was not a requirement I would simply use nginx. 3) "put rewrite rule for proxy inside of " - this is incorrect, and it does not work. This behaviour appears to be not a bug but a "feature" as per https://issues.apache.org/bugzilla/show_bug.cgi?id=54887

  Read the article

• Failover strategy for a 4 servers scenario

  - by Joao Villa-Lobos

  Hi all, I am trying to figure out how to set up replication & failover in a scenario with 4 servers (2 per location) where any server may assume the Master role. My initial scenario is the following one: 2 servers in location A (One Master, One Slave); 2 servers in location B (Two Slaves). For this I'm thinking on using the configuration Master-Master Active-Passive suggested on O'Reilly's "High Performance MySQL" on all of them so each one can become a Master when needed. If the Master "dies" the other server from location A assumes the Master role whenever possible. It will always have a bigger priority then the servers on location B. A server on location B will only switch to Master if no server on location A is able to do so. Since MySQL can't handle this automatically I need some other way to implement this. I've read already about heartbeat and Maatkit. Is this the way to go? Has anyone used this in a similar scenario? Is there some other way to go in order to achieve this? Any pointers about failout will be appreciated. I want to keep this as simple as possible avoiding stuff such as DRDB. I'm not concerned about high availability just a way to switch roles automatically without too many hassle. I'm using SuSe Enterprise 10 and MySQL 5.1.30-community. Thanks in advance, João

  Read the article

• Make isolinux 4.0.3 chainload itself in VMWare

  - by chainloader

  I have a bootable iso which boots into isolinux 4.0.3 and I want to make it chainload itself (my actual goal is to chainload isolinux.bin v4.0.1-debian, which should start up the Ubuntu10.10 Live CD, but for now I just want to make it chainload itself). I can't get isolinux to chainload any isolinux.bin, no matter what version. It either freezes or shows a "checksum error" message. I'm using VMWare to test the iso. Things I have tried: .com32 /boot/isolinux/chain.c32 /boot/isolinux/isolinux-debug.bin (chainload self) this shows Loading the boot file... Booting... ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: Main image LBA = 53F00100 ...and the machine freezes. Then I've tried this (chainload GRUB4DOS 0.4.5b) chainloader /boot/isolinux/isolinux-debug.bin Result: Error 13: Invalid or unsupported executable format Next try: (chainload GRUB4DOS 0.4.5b) chainloader --force /boot/isolinux/isolinux-debug.bin boot Result: ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: No boot info table, assuming single session disk... isolinux: Spec packet missing LBA information, trying to wing it... isolinux: Main image LBA = 00000686 isolinux: Image checksum error, sorry... Boot failed: press a key to retry... I have tried other things, but all of them failed miserably. Any suggestions?

  Read the article

• Ruby Passeger + Nginx or lighthttpi + fgci for shared hosting

  - by devnull

  I have set up a passenger + nginx setup and I plan to offer a free non-commercial hosting (or in fact on the fly deployment) for rack-based frameworks (e.g. camping, sinatra). I am facing an "issue" with passenger. For each application you need to configure nginx.conf (it would be the same with apache so it is not an nginx issue) with: server { ... passenger_base_uri /app1; passenger_base_uri /app2; passenger_base_uri /app3; } Now this is not inherently bad as, in theory, I could allow a user to run just one app on his webspace but even in this case I need to create a new server directory on nginx e.g. (user.domain.com). As this will mainly be used to deploy apps the behavior I am looking at is more the possibility to auto map several apps (e.g. app1, app2, app3, app4) under the same server (your app.com/app1 yourapp.com/app2) without having to update the nginx or apache file each time. This seems to be a limitation in passenger. As such I am thinking about an alternative with lighttpd and fastcgi. Would this allow immediate deployment without touching the lighttpd config file e.g. I create a new directory with app2 and it will run immediately ? What is your experience in performance difference between passenger + nginx vs. lighttpd + fastcgi ? thanks in advance scenario details: on nginx + passenger - user cannot add a new sub-folder and run another sinatra/camping app without declaring the path on nginx.conf and restarting the server; wished behavior with the new setup: - user can add a new folder with a new app and it would run on lighttpd+fcgi without any extra configuration of the web server;

  Read the article

• Windows 7 "freezes" (chills?), and then "unfreezes" after about 1 minute.

  - by gbc001

  Hi, I have an Acer Timeline 1810T netbook (4GB RAM) with Windows 7 x64. About once or twice a day, it "freezes" - the reason I put this in quotation marks is that it does not really freeze, as I you cant move mouse, etc. I can move my mouse and jump between different applications, but I cant use the applications for anything. So I can jump between notepad and Firefox, but I cant browse to a new web page. I have been trying to determine the source of this misery for a while now, and I suspect it has something to do with the hard drive - indirectly if not directly. Here are some screen shots of the resource monitor during a "freeze" and during normal operation: Freeze: http://imgur.com/Gcgq1.jpg Normal operation: imgur.com/mlHaI.jpg As you can see, CPU is fine during freeze, but the disk is going bananas.. Does anyone have an idea of what these reading means, or about the problem in general? There seems to be no specific activity that sets this off - it can be during browsing, or during media playback with nothing else open. The fact that I can see navigate to applications but not use them might suggest a hard drive problem as well? Maybe I can access the stuff that is in RAM, but not anything that would require interaction with the drive.. Very appreciative of any help!

  Read the article

• DMG image containing Mac OS X 10.6.5 update not recognized

  - by Lawliet

  Hello, I want to update my Mac OS X 10.6.3 and want to use the manual package update (not Software Update) and I am having this problem for two days now. First I downloaded Mac OS X 10.6.5 Combo update and on the first opening it popped up a message saying "Unable to mount: disk image not recognized". I thought that somehow the image became corrupt during the download, so I downloaded it again. Same result. And I downloaded again. And again... No use, it still states that the .dmg is not recognized. Then I tried to update my system from 10.6.3 to 10.6.4 using the same method (package installer). It worked. And of course I downloaded the 10.6.5 update (not the combo package, but the 10.6.4 10.6.5 update package)... guess what. Not recognized. I don't understand how is this possible. Did anyone has the same problem? Please don't advice me to use software update, as I need to do that on multiple Macs Thanks in advance.

  Read the article

• Backup hardware and strategy on distributed Windows Server 2008 network

  - by CesarGon

  This question is a follow up to this. We have a Windows Server 2008 R2 domain over a network that spans two different buildings, linked by a 100-Mbps point-to-point line. Over 60 users work in the organisation. We are planning to use DFS folders and DFS replication for file serving across the organisation. The estimated data volume is over 2 TB, and will grow at approximately 20% annually. The idea is to set up a DFS file server in each building and use DFS so that all the contents stay replicated over the 100-Mbps link. We are now considering backup hardware and strategies. We are Dell customers and, after browsing the online Dell catalogue, I can see a number of backup hardware options. My main doubts are the following: Would you go for a tape library, disk backup, or are there other options worth considering? Would you perform batch backups (i.e. nightly) or would you use continuous backup (i.e. while users are working)? Would you use a dedicated backup server to which the tape library (or any other backup device) is attached, or is there any other alternative way of doing things? My experience with backup hardware and overall setup is limited, so I appreciate any good piece of advice that you may have. Thanks.

  Read the article

• None of usb-controllers are working after a crash

  - by Cray

  So I have a GA-p35-DS4 mboard with a Q6600, running windows7-x64. After a random crash with a bluescreen (not caused by anything particular as I recall), none of the usb-controllers are working. (And none of the devices connected to those usb ports). All the controllers are showed up in the device manager, but every one has a warning-icon (as they are not functioning properly). The windows identifies them correctly, it shows exactly the model of each controller, and it says that the driver is installed. Now, when I try to reinstall the driver (Update driver menu item in the device manager), it tries to find it, finds the driver, but quits saying that the driver was found but could not be installed. Additionally, it displays "This operation requires an interactive window station", whatever that means... Now get this, the same thing happens with a new pci-usb controller card! It is found (actually each time the machine starts, it is found as new hardware), but trying to install drivers leads nowhere, I am getting the same message about an interactive window station. (tried to install drivers from the acoompanying CD) I have tried deleting those devices from device manager and let windows find them again, but that leads to same results. None of the ports on this extension card work either. This should not be a hardware problem, a usb keyboard connected to the builtin usb controller works in bios, and even in another OS running the same computer (old xp installation) What to do? Will I have to reinstall? Can deleting infcache.1 help? Is there some way to let windows remove all old drivers and try to find all hardware again, this time only looking for drivers on a windows install disk or something?

  Read the article

• Password Cracking Windows Accounts

  - by Kevin

  At work we have laptops with encrypted harddrives. Most developers here (on occasion I have been guilty of it too) leave their laptops in hibernate mode when they take them home at night. Obviously, Windows (i.e. there is a program running in the background which does it for windows) must have a method to unencrypt the data on the drive, or it wouldn't be able to access it. That being said, I always thought that leaving a windows machine on in hibernate mode in a non-secure place (not at work on a lock) is a security threat, because someone could take the machine, leave it running, hack the windows accounts and use it to encrypt the data and steal the information. When I got to thinking about how I would go about breaking into the windows system without restarting it, I couldn't figure out if it was possible. I know it is possible to write a program to crack windows passwords once you have access to the appropriate file(s). But is it possible to execute a program from a locked Windows system that would do this? I don't know of a way to do it, but I am not a Windows expert. If so, is there a way to prevent it? I don't want to expose security vulnerabilities about how to do it, so I would ask that someone wouldn't post the necessary steps in details, but if someone could say something like "Yes, it's possible the USB drive allows arbitrary execution," that would be great! EDIT: The idea being with the encryption is that you can't reboot the system, because once you do, the disk encryption on the system requires a login before being able to start windows. With the machine being in hibernate, the system owner has already bypassed the encryption for the attacker, leaving windows as the only line of defense to protect the data.

  Read the article

• SATA HDD stuttering on reads (LED on)

  - by jdehaan

  I hope I can get some new ideas to solve the issue. What I have: AMD Phenom II X4 905e Box, Sockel AM3 Gigabyte GA-MA790XTA-UD4, AMD 790X, AM3 ATX WD Caviar GreenPower 1,5TB SATA II 4GB Kit OCZ DDR3 PC3-10666 Platinum Low-Voltage CL7 HIS HD 4670 iSilence4 DDR3 1024MB Native HDMI Dual-DVI, PCI-Express Behavior: Everything works normally excepting the HDD accesses. The drive seems to get stuck in reading data (LED drive by Mainboard is on for a while) then recovers and goes on. There is a delay of more than 30s sometimes. Often it is a matter of 5-10s. This does not seem related to the workload of the disk. What I tried so far: Use different SATA port: I switched from the SATA3 to SATA2 then the SATA driven by the CPU, no difference. Turned AHCI off, drove the SATA in IDE mode, same behavior, now I felt like the HDD has problems Deactivated energy saving settings (BeQuiet, ...), disabled 3 CPUs (msconfig) supposing some race condition or trouble with changing freqs, same trouble With Windows7 Professional 64Bit, I installed the hotfix http://support.microsoft.com/?scid=kb%3Ben-us%3B976418&x=8&y=9 with no success. The problem description matches what I experienced, so I felt lucky but was quite in a sad mood after being deceived. Burned the DLG 5.04f DataLifeGuard CD from WD to check the drive. All tests passed, to my surprise! Installed an Ubuntu on the same drive i386 flavour. Drive still in IDE mode, exactly the same behavior. So the OS does not matter. What I did not try yet: http://www.gigabyte.eu/Support/Motherboard/BIOS_Model.aspx?ProductID=3263 I have a F2 BIOS and there is a F3a Beta, did someone have similar issues that were solved by this update? It is a beta so I fear upgrading a bit and I could find no release notes at all on the net, not really serious work maybe they had issues translating from Chinese??? Using another HDD drive Does someone have other hints or a similar issue? Maybe it is neither the HDD nor the Mainboard/BIOS?

  Read the article

< Previous Page | 707 708 709 710 711 712 713 714 715 716 717 718  | Next Page >