Search Results

Search found 22405 results on 897 pages for 'message threading'.

Page 711/897 | < Previous Page | 707 708 709 710 711 712 713 714 715 716 717 718  | Next Page >

• Windows 7 BSOD when changing power plan

  - by dd5

  i have a strange problem. When i want to change the power plan on my laptop from High performance to Balanced, Windows freezes and i get bsod. The power plan settings are all default. Laptop specs: - Intel Core i3 330M/350M - Intel® HM55 Express Chipset - DDR3 1066 MHz SDRAM 8GB - ATI Mobility™ Radeon HD5730 1GB DDR3 VRAM - Intel SSD330 128gb - Windows 7 Home premium I've searched the internets but couldnt find a similar issue. BSOD first started when i installed this SSD and stopped when i've updated the chipset controller driver then started again yesterday when i wanted to change the power settings plan.Minidump file here. Any help with this weird issue appriciated, thanks. Edit: - i've ran Memory diagnostic tool, - Intel SSD diagnostics - and updated the firmware to 3.2.1. Non of these steps worked or shown signs of errors - but still got BSOD when changing power plan settings. After analizing the dump file via osronline.com here a first few lines: CRITICAL_OBJECT_TERMINATION (f4) A process or thread crucial to system operation has unexpectedly exited or been terminated. Several processes and threads are necessary for the operation of the system; when they are terminated (for any reason), the system can no longer function. Arguments: Arg1: 0000000000000003, Process Arg2: fffffa8008661b30, Terminating object Arg3: fffffa8008661e10, Process image file name Arg4: fffff800033de270, Explanatory message (ascii) -- Solution -- Provided by Vinayak: After installing the Intel Rapid storage Technology from MajorGeeks, i didn't experience a BSOD since, thank you :)

  Read the article

• HP Pavillion DV6500 recovery disk failure

  - by Scott W

  I recently attempted to re-install Windows Vista on an HP Pavillion DV6500 using the factory recovery DVD's, but encountered a strange problem. When the recovery disk attempted to reformat the hard disk, it failed at 22%. The error message provided was not very informative, just the error code "0x400110020000 1005". A google search turned up some people with a similar problem who asserted that HP has been know to ship corrupted recovery DVDs. The recovery disk did manage to reformat the the recovery partition before failing though, so recovering from the partition is no longer an option. It would be possible to reinstall from an off-the-shelf retail copy of Vista and then pull the drivers from HP's website, but I don't have access to a copy of Vista, and it would really be outrageous to have to purchase a new OS when I have a perfectly valid license already. Thought about biting the bullet and upgrading to Windows 7, but my understanding is that without Vista installed I'd be unable to use the upgrade version, and be forced to purchase the more expensive non-upgrade retail copy (!). Can anyone suggest a possible solution to this Catch-22? I've run out of ideas.

  Read the article

• I cannot access Windows Update at all

  - by Cardinal fang

  I have been unable to access the Windows update site for a couple of weeks now. I just get a message saying "Internet Explorer cannot display the webpage" and saying I have connection problems. Same thing is replicated with any other Microsoft site I try to access. The Automatic Updates also do not work. I can access every other wesbite I've surfed to. I've tried Googling the problem and based on what other site have suggested I have cleared my cache and temp files. I've scanning my hard drive with my antivirus in case I have a virus (nada). I've tried turning off my firewall and anti-virus (I run Zone Alarm). I've downloaded SpyBot and scanned my drive with that in case something was missed by Zone Alarm (again nada). Based on suggestions from the smart cookies on the Bad Science forum, I've used nslookup to check my translation isn't wonky (got all the info they said I should get). I've also tried navigating there directly using the IP address I was given (nope). I normally access the internet through a 3 mobile broadband connection, but have also tried connecting using a mate's wi-fi connection in case it was something on my mobile modem interferring. I run Windows XP SP3 with Internet Explorer 7 and Zone Alarm Internet Security Suite as my anti-virus/ firewall. Any suggestions?

  Read the article

• How do I add a WMware ESXi Host to Microsoft Virtual Machine Manager?

  - by user63250

  I am trying to manage virtual machines running on a VMware ESXi host using Microsoft System Center Virtual Machine Manager. I was able to add the ESXi machine using the "Add VMware VirtualCenter server" option, but can't access any of the VMs on the datastore associated with this ESXi server. The datastore of the ESXi box is showing up with the correct name, but it won't let me see any of the VMs that have already been created; I get "There are no virtual machines on this host." Because I couldn't get any of the existing virtual machines to show up, I tried creating some new ones. When using VMM to connect to ESXi and create new VMs, I get the following error messages in the "rating explanation" section: The virtualization software on the selected host does not support virtual hard disks on an IDE bus. and The virtualization software on the host XXXXXX does not support the creation of dynamic virtual hard disk. Any ideas on why I can't manage existing machines and why I can't create new ones? The existing machines were created in vSphere. I should note that the ESXi server and the server running SCVMM are both on the same domain. I should also note that although the ESXi box has been added as a VirtualCetner server, when I try to add it through the "Add Host" option, I get an error message saying "Virtual Machine Manager cannot complete the VirtualCenter action on server EXSi because of the following error: The operation is not supported on the object."

  Read the article

• Problems using InfraRecorder to back up ISOs of certain CDs

  - by Voyagerfan5761

  I've gotten into the habit of backing up my CDs as ISO files, just in case the discs should be damanged, lost, or destroyed. Using InfraRecorder, the process is pretty painless. Unfortunately, I have run into at least two discs that don't back up. I get the error message: Can't read source disc. Retrying from sector 252270 Sometimes this will appear repeatedly. One of the discs is my retail copy of Star Trek: Armada II; the other is disc one of DOOM 3. Both discs run flawlessly when I put them in the drive and let Windows AutoPlay them. Armada II appears as two tracks (one data, one audio) in InfraRecorder, and the error happens at the approximate track boundary. DOOM 3's first disc, however, fails much sooner (around sector 990) and appears as one solid data track. Am I simply using the wrong tools for this job? InfraRecorder is a nice free tool that I can run from my flash drive and use for most tasks of this type, but it does seem to have trouble with certain things. Ideally I'd like to hear about any workarounds people have found for this issue, but if I must switch tools I'm open to it (preferably other free tools).

  Read the article

• SharePoint, Exchange and Incoming Emails Without Directory Management Services

  - by Nariman

  Trying to keep this as simple as possible. We've already created the email accounts that we need (e.g. account[1-20]@domain.com) on Exchange/AD. We'd like to now enable incoming emails on SharePoint 2007 lists corresponding to these accounts. My thinking is we don’t need to configure Directory Management Services [2] – the architecture will be simpler without it and the application doesn’t require these services. However, we still need to route messages from Exchange to either local SMTP services (via the connector described in the articles below) or by user-specific drop-folder settings (if permitted by Exchange). So the question is: can we instruct Exchange to use a drop folder just for accounts account[1-20]@domain.com? or do we need to change the accounts to account[1-20]@sharepointsmtp.domain.com and re-route those message to the local SMTP service that will drop them on disk? I've read the material below. [1] - http://www.combined-knowledge.com/Downloads/2007/How%20to%20configure%20Email%20Enabled%20Lists%20in%20Moss2007%20RTM%20using%20Exchange%202007.pdf http://social.msdn.microsoft.com/Forums/en/sharepointdevelopment/thread/91e0c3d2-afe6-469d-b1bc-6ae7a9aa287e http://gj80blogtech.blogspot.com/2009/12/configure-incoming-email-setting-in.html http://www.jasonslater.co.uk/2007/08/10/configuring-incoming-mail-on-moss-2007-and-exchange-2007/ http://technet.microsoft.com/en-us/library/cc262947%28office.12%29.aspx http://technet.microsoft.com/en-us/library/cc263260%28office.12%29.aspx [2] – http://graycloud.com/sharepoint/incoming-mail-configuration-what-permissions-are-require-t39483.html

  Read the article

• E-mail duplication problem

  - by Gavin Osborn

  I have taken out a hosting agreement with a well respected hosting provider for a couple of internet facing servers. We have deployed several applications to these servers which send various e-mails back to us for reporting purposes. Context: Each server runs Windows Server 2003 R2 with the IIS 6.0 SMTP service installed. Each application is configured to use the local instance of IIS to send e-mails. The external IP address of each server is mapped to a particular domain eg: server1.mydomain.com server2.mydomain.com These e-mails are sent from a company domain name and not the domain name of the hosted servers (eg: [email protected]) Symptoms: A small number (<1%) of e-mails sent from these applications appear to be duplicated. These are exact duplicate in terms of both content and message headers. The Fix: I contacted my hosting provider and they told me this was a common problem & instructed me to: Change the HELO response of your mail server service to a FQDN (server1.mydomain.com && server2.mydomain.com) Create a DNS A record that resolves the FQDN of your mail server to the primary IP address of your sending mail server. Create a PTR record that resolves your primary IP address back to your mail server's FQDN In the sending domain's (mycompanydomain.com) DNS zone file, add the appropriate SPF record for your hosted servers. eg: v=spf1 a mx include:mydomain -all The Problem Continues: I made all of the changes as prescribed above, I was a little hesitant because these steps seemed to suggest they were more for stopping your messages getting blocked than they were for stopping them from being duplicated - but I am certainly no expert in these matters. It has been 5 days since I applied this fix and the problem still persists. I am certain that these problems are not a bug in the software because they are 4 different applications installed on 2 different servers, all of whom are exhibiting this strange behaviour. This behaviour has also not been seen in our UAT environment. Were my hosts correct to suggest this fix? If not, does anyone know what could be the cause of this problem? Many Thanks

  Read the article

• Code to update HyperV Export file

  - by Andy Schneider

  I am using the HyperV Module from Codeplex to do a "config only" export from a 2008R2 Hyper-V server. In order to import the configuration on another HyperV server, I need to edit the value of CopyVMStorage in the EXP file. This file is an XML file. I wrote the following code in PowerShell to do the update for me. The variable $existing is the existing exp file. $xml = [xml](get-content $existing) $xpath = '//PROPERTY[@NAME ="CopyVmStorage"]' foreach ($node in $xml.SelectNodes($xpath)) {$node.Value = 'TRUE'} $xml.Save($existing) This code makes the correct changes to the XML. However, when I go to import the file on the Hyper-V server, I get an error that says the file format is incorrect. I am wondering if the encoding of the file is incorrect or if there is something else going on. If I edit the file manually in wordpad, it imports without an issue. The filename is a GUID with a .exp extension, and it appears that the file name is too long for notepad to open. Notepad throws an error trying to open the file, which is why I went with WordPad. I have noticed that the file that is updated with PowerShell comes out formatted whereas the raw file is xml all bunched together with no whitespace. Any ideas on what "file format" means in this HyperV error message and how I might be able to use my code to automate this change in the XML without changing the file format?

  Read the article

• How to set up simple VPN for secure Internet connections over unencrypted Wi-Fi on Windows?

  - by Senseful

  I'm looking for a solution similar to the one in this question, except that I don't have a linux computer. I have windows computers that could be set up to accept VPN connections. Preferably I want to set this up on either Windows Server 2003 or Windows XP. I'd like to connect different devices (e.g. iPhone, iPad, laptops, etc.) that are on open unsecure wireless networks (e.g. the one's you see at places like Starbucks) to this VPN to ensure that all my data is secure. I found an article that shows that you can enable VPN connections on Windows XP. After following those steps, though, I'm not sure what to do. Which ports do I open on my firewall? Which VPN settings do I use on my devices such as the iPhone? Do I use L2TP, PPTP, or IPSec? What's the difference between these? Are there any other steps missing in that tutorial? I'm hoping that since Windows has this built in feature, that it will be much simpler to set up rather than having to deal with setting up something such as OpenVPN. If I follow those settings and enable port forwarding on port 1723, and then use the following settings on the iPhone: PPTP (IP Address) RSA SecurID: Off Encryption Level: Auto Send All Traffic: On Proxy: Off It shows "Connecting..." then "Disconnecting..." and the following error message: VPN Configuration A connection could not be established to the PPP server. Try reconnecting. If the problem continues, verify your settings and contact your Administrator. I'm using a user account that I enabled privileges to in the VPN settings on the Windows machine.

  Read the article

• Intermittent Trouble Entering Hibernate on WinXP

  - by kquinn

  My personal desktop, running 32-bit Windows XP SP2 (with 4GB RAM, 2.75GB addressable, swap disabled, hiberfil.sys existing and contiguous on C:\; SP3 is not installed because SP2 has been working fine and I do not want to re-qualify with SP3 just for sheer perversity) typically gets hibernated at night. For a long time this worked great, but recently the machine has had trouble entering hibernation. Sometimes when I press my power button (configured to hibernate), the box will start the procedure for hibernating (i.e., go to the blue "Windows XP" background logo and display a message about entering hibernation), but before displaying the usual blue-on-black hibernation progress bar it will drop back to the desktop. No error messages appear, on screen or in the system log. The only record of unsuccessful hibernation attempts in the system log, which proudly proclaims that "The Windows Image Acquisition (WIA) service entered the running state." once per failed hibernation attempt. The problem is almost certainly resource related: if I then close one or more applications which are running, and repeat the exact same process, the machine will hibernate perfectly. There does not appear to be a reliable high-water mark for virtual or physical memory use, below which the machine is guaranteed to hibernate; it's different every time (though typically, below about 1.1–1.4 GB memory usage seems to be where hibernate succeeds most often). Memory may not even be the relevant resource; as far as I know, it could also be handles or sockets. This behavior is relatively recent: it has only started in the last few months; before then, I could hibernate reliably no matter what the current resource use of the system. This machine claims to have hotfix Q909095 installed, but since the symptoms of my problem match KB909095 rather well, I'm suspicious if this fix is actually working as intended. Any ideas on how to fix this or where to start debugging?

  Read the article

• BackupExec 2012 File System Archiving - Access is denied to Remote Agent

  - by AllisZero

  Gentlemen, I've been struggling with a Trial version of Symantec Backup Exec 2012 for about a week now. It was installed as an upgrade to our 12.5 license, and the setup completed with no issues. The reason I upgraded is solely for the File System Archiving option as I'm working to reduce the amount of live data in my servers. Backups work A-Ok and I have followed the instructions in the Admin Manual to make sure I had filled all requirements. The account BE is running under is a member of the Local administrators group as required and has been added to the test share that I'm using to evaluate the archiving function. Testing the credentials in the job setup window always works fine, and I am able to add both regular and Admin$ shares to my Archive selection. However, every time I run the Archive job, I get the following message: https://dl.dropbox.com/u/59540229/BEXec.png I've already tried to troubleshoot DNS resolution issues as suggested in the Symantec KB to no avail. The only thing I can think of, at this point, is that a trial license doesn't allow me to use the Archiving function, although that would seem silly on their part. Appreciate any assistance or information. Thanks.

  Read the article

• Windows 7 notebook turn off by itself, how to check if it is due to CPU being too hot?

  - by Jian Lin

  I have a Dell Studio 15 notebook, and it just started turning off by itself yesterday. Could it be that the CPU is too hot? I have had several notebooks before and every one of them I can put them on the bed without any problem. This Dell Studio Notebook, however, seems like have the air / fan outlet pointed outward from the bottom back of the notebook, so I suspect that the air is partially blocked when it is on the bed. Are there Win 7 tools that can monitor the CPU temperature, or will some 3rd party tool be needed? (I try to stick to official tools nowadays). Also, it is running Win 7 Ulitmate, there is actually no utility or background service from Win 7 or from Dell that detects when the temperature is too hot (or 95% near the max), pop out a message box giving a warning and say that the computer will go into sleep mode in 1 minute, but instead just turn off the computer by brute force (cutting out the power) right then and there? Update: it turned off right in front of my eyes -- it is not doing any windows update or anything. just normal use and jooooop, it turned off.

  Read the article

• BIOS not detecting working SATA hard drive.

  - by Evan

  Some time ago my power supply died. It's a long story from then till now, but the important bit is that I ended up with a new hard drive and a new power supply. I tested to see if my original hard drive was still alive, and it booted and worked perfectly until I turned it off. When I started it again it would not boot. I bought new SATA cables, assuming that the one I had was not seating properly (it was cheap and wobbly), but no dice. Upon start-up I am presented with a message telling me to insert boot media into the selected drive or add a drive and restart. Neither the new or the old drive is detected by BIOS, my Vista install disk, or from my bootable Linux USB drive. When I remove all of the RAM the computer ceases outputting visual information, and upon reinstalling the ram and starting up again gives me a "failed overclock" error. So, does anyone have an idea as to what might be going on? I'm completely lost at this point.

  Read the article

• How can I wipe my iPod classic and fix any bad sectors on the hard drive without killing it?

  - by Sam Meldrum

  My iPod never finishes syncing and only syncs audio, not pictures or video. Any ideas as to how I can fix it? My iPod classic 160GB worked well for a couple of years. I used to sync a lot of photos at full resolution to it, but this recently stopped working after I moved to Windows 7. iTunes is on latest version - 9.1.1.12 iPod software is up to date - 1.1.2 Windows 7 is fully up to date and patched The symptoms are that the iPod will start to sync, all audio (music and podcasts will sync successfully) but the syncing will then just appear to continue - itunes message: Syncing iPod. Do not Disconnect. This sync never completes - I have left it trying for days. I have tried resetting the iPod using the Restore button, whereupon it restarts sync from default options and again will sync audio, but nothing else. I suspect that something has gone wrong on the hard-drive - either a bad sector or some corrupt data. Is there a process I can go through to fix this? E.g. SpinRite or a format? If so how do I go about formatting an iPod and will it be recognised as an iPod after format and work as normal? Any advice on what to try next much appreciated? Update I have eliminated problems with the files, PC or iTunes as they sync fine to other iPods. I have also eliminated the cable by trying different cables which work with other iPods. What I'd really like to know is if there is any way to more fundamentally wipe the iPod safely, attempt to repair any bad sectors on the hard drive and then start from scratch. Anyone ever managed this?

  Read the article

• How do I increase the buffer size for domain sockets in OS X 10.6

  - by Chas. Owens

  In Linux I have no problem dumping tons of data into a domain socket, but the same code on OS X 10.6.2 blows up after about 65 records. The socket reader code looks like #!/usr/bin/perl use strict; use warnings; use IO::Socket; unlink "foo"; my $sock = IO::Socket::UNIX->new ( Local => 'foo', Type => SOCK_DGRAM, Timeout => 600, ) or die "Could not create socket: $!\n"; while (<$sock>) { chomp; print "[$_]\n"; } And the client code looks like #!/usr/bin/perl use strict; use warnings; use IO::Socket; my $sock = IO::Socket::UNIX->new ( Peer => 'foo', Type => SOCK_DGRAM, Timeout => 600, ) or die "Could not create socket: $!\n"; for my $i (1 .. 1_000_000) { print $sock "$i\n" or die $!; } close $sock; The error message I get is No buffer space available at write.pl line 15.. It seems fairly obvious that there is a difference in the buffer size between Linux and OS X, but I don't know how to set it OS X (or what the possible negative side effects might be).

  Read the article

• Remote connection to a Windows 2008 Server Web edition

  - by Lorenzo

  Hello I have just installed Windows 2008 web server to have a development/test site on my office. In the test network I only have 2 machines: Windows server 2008 Web Edition Vista x64 client machine with Visual Studio The client and the server are networked using a NETGEAR router. I have enabled Remote desktop on the server and when I try to connect to it within the Vista client I get the credential window as in the following screenshot. But even if I write the correct credentials I am not able to remote login on the server. Where am I doing wrong? Update 1 I have even tried to create a folder share on the server. But I am not able to access it for the same reason. User or password invalid it says. But this is impossible as I am logging in the server with the same credentials. Update 2 If I try to browse the network from the RDP client I receive a message saying that there are no server running Terminal Services in my network.... :O

  Read the article

• Postfix cannot deliver mail to Cyrus mailbox on Ubuntu 11.10 server

  - by user105804

  I have installed and configured Postfix and Cyrus IMAP server with webcyradm according to this document - http://www.delouw.ch/linux/Postfix-Cyrus-Web-cyradm-HOWTO/html/index.html . I can access webcyradm interface, I can create new domains and new users, and I can login via IMAP after creating the user account. However, Postfix fails to deliver mail to cyrus mailboxes. Mail log contains errors shown below. Installing any IMAP server other than cyrus is not an option because it is needed by the web application. Please advise me how to make Postfix deliver email to cyrus mailboxes. The solution should not necessary include web-cyradm, but there should be a web interface for managing mail domains and mailboxes as user-friendly as possible. Dec 30 22:46:17 acer-tower cyrus/lmtpunix[4865]: accepted connection Dec 30 22:46:17 acer-tower cyrus/lmtpunix[4865]: lmtp connection preauth'd as postman Dec 30 22:46:17 acer-tower postfix/cleanup[4868]: 065D5240035: message-id=<[email protected]> Dec 30 22:46:17 acer-tower cyrus/lmtpunix[4865]: verify_user(user.imap0001) failed: Mailbox does not exist Dec 30 22:46:17 acer-tower postfix/bounce[4867]: 6C6CA24185C: sender non-delivery notification: 065D5240035 Dec 30 22:46:17 acer-tower postfix/qmgr[4833]: 065D5240035: from=<>, size=3372, nrcpt=1 (queue active) Dec 30 22:46:17 acer-tower postfix/qmgr[4833]: 6C6CA24185C: removed Dec 30 22:46:17 acer-tower postfix/lmtp[4866]: 53421240372: to=<[email protected]>, orig_to=<[email protected]>, relay=home.webshop-software.ch[/tmp/lmtp], delay=165, delays=165/0.02/0.17/0.09, dsn=5.1.1, status=bounced (host home.webshop-software.ch[/tmp/lmtp] said: 550-Mailbox unknown. Either there is no mailbox associated with this 550-name or you do not have authorization to see it. 550 5.1.1 User unknown (in reply to RCPT TO command))

  Read the article

• Postfix SMTP-relay server against Gmail on CentOS 6.4

  - by Alex

  I'm currently trying to setup an SMTP-relay server to Gmail with Postfix on a CentOS 6.4 machine, so I can send e-mails from my PHP scripts. I followed this tutorial but I get this error output when trying to do a sendmail [email protected] Output: tail -f /var/log/maillog Apr 16 01:25:54 ext-server-dev01 postfix/cleanup[3646]: 86C2D3C05B0: message-id=<[email protected]> Apr 16 01:25:54 ext-server-dev01 postfix/qmgr[3643]: 86C2D3C05B0: from=<[email protected]>, size=297, nrcpt=1 (queue active) Apr 16 01:25:56 ext-server-dev01 postfix/smtp[3648]: 86C2D3C05B0: to=<[email protected]>, relay=smtp.gmail.com[173.194.79.108]:587, delay=4.8, delays=3.1/0.04/1.5/0.23, dsn=5.5.1, status=bounced (host smtp.gmail.com[173.194.79.108] said: 530-5.5.1 Authentication Required. Learn more at 530 5.5.1 http://support.google.com/mail/bin/answer.py?answer=14257 qh4sm3305629pac.8 - gsmtp (in reply to MAIL FROM command)) Here is my main.cf configuration, I tried a number of different options but nothing seems to work: alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = localhost inet_protocols = ipv4 mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost myhostname = host.local.domain myorigin = $myhostname newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relayhost = [smtp.gmail.com]:587 sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = noanonymous smtp_sasl_tls_security_options = noanonymous smtp_sasl_type = cyrus smtp_tls_CAfile = /etc/ssl/certs/ca-bundle.crt smtp_use_tls = yes smtpd_sasl_path = smtpd unknown_local_recipient_reject_code = 550 In the /etc/postfix/sasl_passwd files (sasl_passwd & sasl_passwd.db) I got the following (removed the real password, and replaced it with "password"): [smtp.google.com]:587 [email protected]:password To create the sasl_passwd.db file, I did that by running this command: postmap hash:/etc/postfix/sasl_passwd Do anybody got an idea why I can't seem to send an e-mail from the server? Kind Regards Alex

  Read the article

• Dell Driver Support for Latitude E6320 Windows 7 Enterprise

  - by IamPolaris

  I recently did a reinstall of Windows 7 Enterprise on a Dell Latitude E6320, which is a 64 bit system. After the install process, and doing typical Windows Update stuff, I looked at my Device Manager and found that I had devices which were missing drivers. My missing drivers: After going to the Dell Support site and looking at the files, and doing some sleuthing I found the following support document: http://downloads.dell.com/utility/Latitude%20E-Family%20%20Mobile%20Precision%20Re-Image%20How-To%20Guide%20-%20A03%20Rev%203%200.pdf This document hints in appendix C that the Broadcom USH is the Control Point Security and the Unknown device is Micro freefall sensor. The network controller is my wireless, as I cannot connect wirelessly, and the final missing driver I am not sure. Attempting to install the control point security exe on the support page will not work. After downloading, I am given the message that I am attempting to install a 32 bit driver on a 64 bit machine EVEN THOUGH I selected the win7 64 bit option from the support page. Beyond that, some of the drivers (Which are confusing to read and hard to understand what they do) and the system utilities which are supposedly supposed to make this process simpler will either a) not run because they are 32 bit exe's or b) the support page cannot find the file attempted to download. Is there anything I can do to get (at the very least) my wireless running, but idealistically all of my drivers. A solution which assumes Dell is completely incompetent would be ideal. :P Some forums have said that I should download the chipset driver, others say to get the system utility file (DSS_UTIL_WIN_R282536.EXE). I have had no luck as of yet...

  Read the article

• Calendar booking issue - Exchange 2003 and 2010

  - by NaOH

  In our organization we are running Exchange 2003 and 2010 simultaneously, with the hopes of migrating everyone to Exchange 2010 sometime within the next few months. Everyone is using Outlook 2010. Recently, we had an issue with transaction log storage on the Exchange 2003 server. This was resolved, but for some reason no meeting rooms on the Exchange 2003 server will automatically book meetings any longer. I have played around with this for a while, changing calendar permissions, turning resource scheduling off and back on, etc. No dice. My next step was to try migrating a resource to the Exchange 2010 server. After doing so, and setting it up as a Room, enabling Auto-Accept and removing the EnableDirectBooking registry entry on my PC, I can book a meeting with this room. If EnableDirectBooking is enabled, I get an error message stating: "Meeting Room" declined your meeting because it is recurring. You must book each meeting separately with this resource. This is despite the fact that the meeting I'm attempting to create has no recurrence. Now, I have also created a new test Room from scratch on the Exchange 2010 server, and I can book a meeting with this Room regardless of whether or not I have the EnableDirectBooking reg entry in place. All users here have this registry entry, and I'd rather not have to figure out how to push something out to remove it from every PC. Rather, I'd like to figure out what's different between the configurations of these two meeting rooms so that I could book a meeting room regardless of whether EnableDirectBooking is enabled or not. Any ideas, anyone? Thanks!

  Read the article

• Backup script to FTP with timed subfolders

  - by Frederik Nielsen

  I want to make a backup script, that makes a .tar.gz of a folder I define, say fx /root/tekkit/world This .tar.gz file should then be uploaded to a FTP server, named by the time it was uploaded, for example: 07-10-2012-13-00.tar.gz How should such backup script be written? I already figured out the .tar.gz part - just need the naming and the uploading to FTP. I know that FTP is not the most secure way to do it, but as it is non-sensitive data, and FTP is the only option I have, it will do. Edit: I ended up with this script: #!/bin/bash # have some path predefined for backup unless one is provided as first argument BACKUP_DIR="/root/tekkit/world/" TMP_DIR="/tmp/tekkitbackup/" FINISH_DIR="/tmp/tekkitfinished/" # construct name for our archive TIME=$(date +%d-%m-%Y-%H-%M) if [ $1 ]; then BACKUP_DIR="$1" fi echo "Backing up dir ... $BACKUP_DIR" mkdir $TMP_DIR cp -R $BACKUP_DIR $TMP_DIR cd $FINISH_DIR tar czvfp tekkit-$TIME.tar.gz -C $TMP_DIR . # create upload script for lftp cat <<EOF> lftp.upload.script open server user user password lcd $FINISH_DIR mput tekkit-$TIME.tar.gz exit EOF # start backup using lftp and script we created; if all went well print simple message and clean up lftp -f lftp.upload.script && ( echo Upload successfull ; rm lftp.upload.script )

  Read the article

• Celery daemon as a Ubuntu service does not consume tasks while running from terminal does

  - by Guy

  On Ubuntu 11.10, I have to issue python tasks from django using celery. I'm currently testing on the same machine but eventually the celery worker should run on a remote machine. django uses the following settings: BROKER_HOST = "127.0.0.1" BROKER_PORT = 5672 BROKER_VHOST = "/my_vhost" BROKER_USER = "celery" BROKER_PASSWORD = "celery" I can also see my task queued in http://localhost:55672/#/queues the celery daemon uses the following configuration (celeryconfig.py): BROKER_HOST = "127.0.0.1" BROKER_PORT = 5672 BROKER_USER = "celery" BROKER_PASSWORD = "celery" BROKER_VHOST = "/my_vhost" CELERY_RESULT_BACKEND = "amqp" import os import sys sys.path.append(os.getcwd()) CELERY_IMPORTS = ("tasks", ) running celeryd -l info works well and now I want to run it as a service. I've followed the instructions from http://ask.github.com/celery/cookbook/daemonizing.html and now I'm trying to run it using: sudo /etc/init.d/celeryd start But the message is not being consumed, no error in the celery log either. /etc/default/celeryd CELERYD_NODES="w1" CELERYD_CHDIR="/path/to/django/project" CELERYD_OPTS="--time-limit=300 --concurrency=1" CELERY_CONFIG_MODULE="celeryconfig" # %n will be replaced with the nodename. CELERYD_LOG_FILE="/var/log/celery/%n.log" CELERYD_PID_FILE="/var/run/celery/%n.pid" # Workers should run as an unprivileged user. CELERYD_USER="celery" CELERYD_GROUP="celery" I've also created user celery in Ubuntu not sure if its necessary. Any help will be appreciated, Thanks, Guy

  Read the article

• Mystery 0xc0000142 error on starting java from a service, as a different user.

  - by cpf

  This is a very convoluted setup, but effectively this is what goes down: Manager service (which I don't have control over) running as admin user X starts my executable, which then starts Java as user Y using the standard c# StartInfo.Username/Password controls. Now, from a basic (not elevated or anything, just admin) command prompt I can run that executable, and Java pops up and works fine, running perfectly under the user it should be. When the service runs the same executable, however, Java silently fails. The only hint I see is this series of events in the event viewer: Service starts "Application popup: java.exe - Application Error : The application was unable to start correctly (0xc0000142). Click OK to close the application. " (googling this reveals a lot of scam sites telling me to use their "free antivirus to fix 0xc0000142 errors easy!"... sigh) Service stops (the java shutdown propagated, which is supposed to happen) And here's what process explorer has for the failure: As you can see, everything shows as a success. Now, I think this might have something to do with the permissions (the user java.exe is running under has traverse permission for the entire drive and full permissions to Directory A, which is where the .jar is), but I just can't fathom how something that works fine from the command line (and, this is an upgrade, the previous system without the user-switching aspect works fine from the service) can fail with such a cryptic message and little showing up in logs.

  Read the article

• Windows 8 Pro Homegroup Not Allowing Access to Shared Files

  - by Jack Herr

  I have two pc's and a laptop. With all three running Windows 7, homegroup worked perfectly, with all computers able to access the files on the others exactly as one would expect. I installed Windows 8 Pro, which I downloaded recently from the MSDN website, on the laptop. From the info on the MSDN website, I believe the version downloaded is the official release version, not a release candidate. The install preserved all settings, apps, and files. I cannot connect to the homegroup from the laptop. Well, not exactly. I joined the homegroup during the install, and later left and rejoined, that was advertised as being offered by one of the pc's (not sure why that one was picked and not the other or both). This homegroup appears in my "computer" folder in the file explorer, offering files from that pc. But it excludes documents (only the music, pix, videos, and playlists folders on the one computer appear). I can actually access those files from the laptop. But the Homegroup folder, which actually shows all the computers by account and computer name and includes documents from both computers, does not open those folders when clicked. The computers listed by name in the Network folder give me a login that doesn't work. It asks for a username and password, no combinations of which work. Further, the following error message appears before the login is even attempted: "The system cannot contact a domain controller to service the authentication request. Please try again later." The two windows 7 pc's continue to share all files, including documents, seemlessly. I can also get to the laptop shared files, which I shared during setup, from either pc. Any ideas?

  Read the article

• Outlook Web Access and Rules

  - by Chris_K

  One of my clients would prefer that I have an email address in their domain. They run SBS 2k8 so I just monitor my email from them (and their clients) via Outlook Web Access. No POP or IMAP access, only OWA. No VPN access either, so no "real" Outlook. Just OWA. I figured I'd build an outlook rule to forward mail from that account to an account that I monitor -- that way I won't need to keep IE open all the time to monitor email. However, I just can't seem to get the dang rule to work and am hoping someone here can give me a nudge or pointer. From OWA, I click on Options - Rules and edit my current rule that kinda works. The rule is supposed to forward the email sent to me and then move it to a folder. It does move it to a folder... just never seems to forward it. The rule looks like this: Apply this rule after the message arrives where my name is in the To box redirect it to [email protected] and move it to the Forwarded to MyEmail folder except with "ALERT" in the subject As I mentioned, mail does get moved, just never redirected. I've tried "Forward" and "redirect" actions with the same results. Any suggestions?

  Read the article

< Previous Page | 707 708 709 710 711 712 713 714 715 716 717 718  | Next Page >