Search Results

Search found 44956 results on 1799 pages for 'type checking'.

Page 713/1799 | < Previous Page | 709 710 711 712 713 714 715 716 717 718 719 720  | Next Page >

• How to get back the themes feature in Windows XP?

  - by Martín M.

  When I try to set a visual style in Windows XP (the standard Luna, for example), I get one of these two: "Access denied" error. It works, but when I restart the computer, I get the Classic look again, with no errors. Also, the "Windows and icons" dropdown is grayed out in the "Appearance". This is a list of things I have tried, with no results: Making sure "Use visual styles on windows" is checked on System Properties Advanced Performance. Restarting the "Themes" service. It starts cleanly, no errors. Applying these two fixes: Kelly's Corner and tweaks.com. Running sfc /scannow and checking the integrity of uxtheme.dll against a clean installation of XP Restoring the whole \Windows\Resources\Themes directory. Creating a new user. The new user does not seem to suffer this problem. Maybe this is the solution, create a new user and migrating all the data, but it would be a pain, and I would prefer reinstalling the whole thing. I am using Windows XP Professional SP3, with no spyware, no virus, and no other visible malfunctions. How can I fix this?

  Read the article

• Internet Explorer 8 Loses Cookies

  - by Mikeon

  I'm running Windows 7 for some time now and use Internet Explorer 8 as my main browser. What I've noticed is that it "loses" cookies A LOT! I mean it! Typical situation: I log in into a side checking the remember me checkbox. I reboot the computer/restart the browser, go to the site, get logged in automatically - I'm happy. From time to time however, I'm asked for the credentials. Normal situation you would say. So would I if it didn't happen few times a week. Come on! On Internet Explorer 7 I didn't notice this as much. Cookies were lost once a quarter or so. Note that i was using IE7Pro with my IE - dunno however if it has anything to do with my current problem. Anyway I wonder if this behavior is "normal" or is it only me? more info for people that suggest it may be normal - cookie expiring and stuff. When it happens I loose all auth cookies - gmail, bloglines and whatnot!

  Read the article

• What is auto-mounting my media volume?

  - by user285277

  Something is repeatedly mounting my "media" share, doing something with it, then quietly un-mounting it with no notifications at the user level. from the little I can gleaned from the console messages below, I thought I'd managed to stop it, if not understand it last night when I followed instructions for deleting all traces of the Google Update Daemon. I've not been using any Google apps whatsoever, so I was surprised to see that in Console. What's more surprising, and perhaps a little distressing, is that the same thing occurred this evening, when the Google Daemon is long gone. I don't have that log because I can't recall precisely what time it occurred. I'll do a search and provide it if you wish, though. In the meantime, any help with this would be extremely appreciated. I've asked over at Apple Discussions but I think it might be a little deeper than those manning the boards this weekend are comfortable with. It's certainly beyond my meager skills. With apologies in advance if this is more lines thank you need. Please note that I've transformed the Google links a little because the forum here requires more reputation points before one can post more than two links. 12/27/13 10:47:31.000 PM kernel[0]: memorystatus_thread: idle exiting pid 53629 [distnoted] 12/27/13 10:48:10.433 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 0; not stale; error: The file doesn’t exist. 12/27/13 10:48:10.434 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 1; not stale; error: The file doesn’t exist. 12/27/13 10:48:10.950 PM com.apple.SecurityServer[17]: Session 103257 created 12/27/13 10:48:34.328 PM com.apple.Preview.TrustedBookmarksService[53640]: Failed to resolve bookmark data at index: 2; not stale; error: The file doesn’t exist. 12/27/13 10:48:34.000 PM kernel[0]: AFP_VFS afpfs_mount: /Volumes/Media Archive-1, pid 53641 12/27/13 10:48:34.000 PM kernel[0]: AFP_VFS afpfs_mount : succeeded on volume 0xffffff80d6355008 /Volumes/Media Archive-1 (error = 0, retval = 0) 12/27/13 10:49:32.000 PM kernel[0]: wlEvent: en0 en0 Link DOWN virtIf = 0 12/27/13 10:49:32.000 PM kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving). 12/27/13 10:49:32.000 PM kernel[0]: en0::IO80211Interface::postMessage bssid changed 12/27/13 10:49:33.681 PM configd[16]: network changed: v4(en0-:10.0.1.12) DNS- Proxy- SMB 12/27/13 10:49:33.697 PM configd[16]: network changed: DNS* Proxy 12/27/13 10:49:35.475 PM KernelEventAgent[57]: tid 00000000 received event(s) VQ_NOTRESP (1) 12/27/13 10:49:35.000 PM kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xffffff802176b4a0 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Media Archive-1 prevTrigger 0 currTrigger 1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEA EINPROGRESS for /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 600 secs, Connect timeout: 15 secs for /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:35.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 1 seconds and then try again 12/27/13 10:49:35.479 PM KernelEventAgent[57]: tid 00000000 type 'afpfs', mounted on '/Volumes/Media Archive-1', from '//Me@Capsule._afpovertcp._tcp.local/Media%20Archive', not responding 12/27/13 10:49:35.487 PM KernelEventAgent[57]: tid 00000000 found 1 filesystem(s) with problem(s) 12/27/13 10:49:36.692 PM com.bourgeoisbits.cloak.agent[14503]: NetworkProfile: (null), (null), (null) (Connected: NO, Airport: NO, Open: NO) [trusted] 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:36.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 2 seconds and then try again 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:38.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 4 seconds and then try again 12/27/13 10:49:41.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=53662[GoogleSoftwareUp] clearing CS_VALID 12/27/13 10:49:42.102 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending: com.google.Keystone.Daemon.UpdateEngine: 2 connection(s) com.google.Keystone.Daemon.Administration: 0 connection(s) 12/27/13 10:49:42.113 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone" 12/27/13 10:49:42.116 PM GoogleSoftwareUpdateDaemon[53663]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s). 12/27/13 10:49:42.121 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {( <KSTicket:0x531870 productID=com.google.Keystone version=1.1.0.3659 xc=<KSPathExistenceChecker:0x5302d0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 > )} Using server: <KSOmahaServer:0x534340 engine=<KSDaemonUpdateEngine:0x52e530> params={ EngineVersion = "1.1.0.3659"; ActivesInfo = { "com.google.talkplugin" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; }; "com.google.Keystone" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; LastActivePingDate = 2013-10-06 07:00:00 +0000; LastActiveDate = 2013-12-28 03:49:42 +0000; }; "com.google.picasa" = { LastActiveDate = 2012-08-29 10:15:42 +0000; }; }; UserInitiated = 0; IsSystem = 1; OmahaOSVersion = "10.8.5_i486"; Identity = KeystoneDaemon; AllowedSubdomains = ( ".omaha.sandbox.google.com", ".tools.google.com", ".www.google.com", ".corp.google.com" ); } > 12/27/13 10:49:42.130 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x1a31a90 server=<KSOmahaServer:0x534340> url="htt[PeeEs]://tools.google.com/service/update2" runningFetchers=0 tickets=1 activeTickets=1 rollCallTickets=1 body= <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <o:gupdate xmlns:o="htt[Pee]://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1"> <o:os platform="mac" version="MacOSX" sp="10.8.5_i486"></o:os> <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82" a="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> </o:gupdate> > 12/27/13 10:49:42.291 PM GoogleSoftwareUpdateDaemon[53663]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009] 12/27/13 10:49:42.291 PM GoogleSoftwareUpdateDaemon[53663]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone) [com.google.UpdateEngine.CoreErrorDomain:702 - 'htt[PeeEs]://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009]) 12/27/13 10:49:42.292 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )} 12/27/13 10:49:42.295 PM GoogleSoftwareUpdateDaemon[53663]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch. 12/27/13 10:49:42.295 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply. 12/27/13 10:49:42.296 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply. 12/27/13 10:49:42.299 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete. 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:42.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 8 seconds and then try again 12/27/13 10:49:43.152 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products. 12/27/13 10:49:43.153 PM GoogleSoftwareUpdateDaemon[53663]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s). 12/27/13 10:49:43.158 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {( <KSTicket:0x18367a0 productID=com.google.Keystone version=1.1.0.3659 xc=<KSPathExistenceChecker:0x1837e10 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 >, <KSTicket:0x1834750 productID=com.google.talkplugin version=4.7.0.15362 xc=<KSPathExistenceChecker:0x1833890 path=/Library/Application Support/Google/GoogleTalkPlugin.app> serverType=Omaha url=htt[PeeEs]://tools.google.com/service/update2 creationDate=2012-08-12 14:47:10 > )} Using server: <KSOmahaServer:0x52e930 engine=<KSDaemonUpdateEngine:0x52e530> params={ EngineVersion = "1.1.0.3659"; ActivesInfo = { "com.google.talkplugin" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; }; "com.google.Keystone" = { LastRollCallPingDate = 2013-10-06 07:00:00 +0000; LastActivePingDate = 2013-10-06 07:00:00 +0000; LastActiveDate = 2013-12-28 03:49:42 +0000; }; "com.google.picasa" = { LastActiveDate = 2012-08-29 10:15:42 +0000; }; }; UserInitiated = 0; IsSystem = 1; OmahaOSVersion = "10.8.5_i486"; Identity = KeystoneDaemon; AllowedSubdomains = ( ".omaha.sandbox.google.com", ".tools.google.com", ".www.google.com", ".corp.google.com" ); } > 12/27/13 10:49:43.159 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x53a210 server=<KSOmahaServer:0x52e930> url="htt[PeeEs]://tools.google.com/service/update2" runningFetchers=0 tickets=2 activeTickets=1 rollCallTickets=2 body= <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <o:gupdate xmlns:o="htt[Pee]://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1"> <o:os platform="mac" version="MacOSX" sp="10.8.5_i486"></o:os> <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82" a="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> <o:app appid="com.google.talkplugin" version="4.7.0.15362" lang="en-us" installage="502" brand="GGLG"> <o:ping r="82"></o:ping> <o:updatecheck></o:updatecheck> </o:app> </o:gupdate> > 12/27/13 10:49:43.243 PM GoogleSoftwareUpdateDaemon[53663]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTerminate:] The Internet connection appears to be offline. [NSURLErrorDomain:-1009] 12/27/13 10:49:43.243 PM GoogleSoftwareUpdateDaemon[53663]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone, ... (2)) [com.google.UpdateEngine.CoreErrorDomain:702 - 'htt[PeeEs]://tools.google.com/service/update2'] (The Internet connection appears to be offline. [NSURLErrorDomain:-1009]) 12/27/13 10:49:43.244 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )} 12/27/13 10:49:43.247 PM GoogleSoftwareUpdateDaemon[53663]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch. 12/27/13 10:49:43.248 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply. 12/27/13 10:49:43.248 PM GoogleSoftwareUpdateDaemon[53663]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply. 12/27/13 10:49:43.250 PM GoogleSoftwareUpdateDaemon[53663]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete. 12/27/13 10:49:45.570 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending: com.google.Keystone.Daemon.UpdateEngine: 1 connection(s) com.google.Keystone.Daemon.Administration: 0 connection(s) 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Media Archive-1 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: connect on /Volumes/Media Archive-1 failed 65. 12/27/13 10:49:50.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: sleep for 10 seconds and then try again 12/27/13 10:49:53.828 PM KernelEventAgent[57]: tid 00000000 unmounting 1 filesystems 12/27/13 10:49:53.000 PM kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Media Archive-1, flags 524288, pid 57 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: get the reconnect token 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_DoReconnect: GetReconnectToken failed 32 /Volumes/Media Archive-1 12/27/13 10:49:54.000 PM kernel[0]: AFP_VFS afpfs_unmount : afpfs_DoReconnect sent signal for unmount to proceed 12/27/13 10:50:12.104 PM GoogleSoftwareUpdateDaemon[53663]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown. 12/27/13 10:50:29.396 PM Dock[93157]: no information back from LS about running process

  Read the article

• How to Load Balance 2 Internet Connections on a Windows 7 machine?

  - by Jimmy Chandra

  It's sort of related to this particular question, but that one is on Mac. I am looking for similar solution on Windows 7. I have 2 network connections: (Connection A) Wireless terminal connecting to ISP A (3G / EVDO internet provider) (Connection B) Broadband wired connection connecting to ISP B (Cable internet provider) Both has access to the internet. When I try connecting to a website and checking the networking tab on my Task Manager, I only see the network traffic being routed to only Connection A. Is there a way to make the computer to utilize both network (in a sense using all the bandwidth available from both the Cable ISP and the 3G / EVDO ISP) at the same time? If so, what do I need to do to set this up ... on Windows 7? Here is a bit more info on my network connections (ipconfig /all): PPP adapter Wireless Terminal: IPv4: aa.bb.ccc.ddd(preferred) Subnet mask: 255.255.255.255 Default Gateway: 0.0.0.0 DNS: aa.ee.f.ggg aa.ee.f.hhh Primary Wins: jjj.ii.k.l Secondary Wins: jjj.ii.k.m Ethernet adapter LAN: IPv4: 192.168.1.100 (connected to a router by wired that itself connect to a cable modem) subnet mask: 255.255.255.0 Default gateway: 192.168.1.1 (the wireless router) DHCP: 192.168.1.1 (the wireless router) DNS: xxx.yy.zz.ww rr.sss.t.uuu For my own privacy, I don't believe the actual number matters, the patterns are representative of the ip numbering scheme...

  Read the article

• Recommended open-source firmware for ASUS RT-N16

  - by MasterF

  I have recently acquired an ASUS RT-N16 router. My original plan for it was to install Tomato on it. However, after checking their website i found out that the firmware was not updated in the last 2 years. There seem to be a few updated mods but none of them really seemed mature/stable/well-documented. I would like to know what other people recommend as open-source firmware for this router. I know the answers will probably be subjective; so i will give a bit of background on my needs: for now i will only use the Wi-Fi on an Android phone the connection will not be shared with anyone (so QOS is optional) i want a stable (wired) connection on my PC (for online gaming etc.) i want the (wired) download/upload speeds to be as close as possible to those achieved by directly plugging the Ethernet cable to the PC's network card; i have a 100 Mbps connection my ISP uses PPPOE my technical level: i am a software developer and i have good knowledge of bash scripting, but no experience with networking Also, i know that i could probably just use the stock firmware (and maybe will use it for a while), but i'm interested in trying an open-source version (for more features, flexibility, as a learning exercise etc.)

  Read the article

• Error related to pkg-config when installing frei0r as part of another package

  - by Anentropic

  I am trying to build https://github.com/mltframework/shotcut on OS X Lion (using their script in scripts/build_shotcut.sh) and after numerous hurdles I'm stuck on this error: ./configure: line 16062: syntax error near unexpected token `OPENCV,' ./configure: line 16062: `PKG_CHECK_MODULES(OPENCV, opencv >= 1.0.0, HAVE_OPENCV=true, true)' ERROR: Unable to configure frei0r From what I already googled this means that the PKG_CHECK_MODULES macro hasn't been defined, which probably means there's something wrong with my pkg-config, which I installed via Homebrew. Sounds like the pkg.m4 file isn't found. When I brew install pkg-config I get the following warning: Warning: m4 macros were installed to "share/aclocal". Homebrew does not append "/usr/local/share/aclocal" to "/usr/share/aclocal/dirlist". If an autoconf script you use requires these m4 macros, you'll need to add this path manually. Well I've appended that line to the dirlist file and it doesn't fix the problem above. Can anyone suggest a way forward here? I have briefly tried building my own pkg-config from source but (bizarrely) when I tried to ./configure I got the following error: checking for pkg-config... no ./configure: line 13540: --exists: command not found configure: error: pkg-config and glib-2.0 not found, please set GLIB_CFLAGS and GLIB_LIBS to the correct values if building pkg-config needs pkg-config it seems like a weird catch 22 situation... I think this is probably an unnecessary sidetrack anyway.

  Read the article

• Problems compiling coreutils-8.5 on Solaris 5.10 on Intel platform

  - by PP

  I am having trouble compiling coreutils-8.5 on Solaris 5.10 on the Intel platform using cc. Firstly I had the following error during ./configure: checking whether <wchar.h> uses 'inline' correctly... no configure: error: <wchar.h> cannot be used with this compiler (/tool/sunstudio12.1/bin/cc -xc99=all -g -D_REENTRANT). This seemed similar to the problem in this question. The solution was to edit configure and replace the reference of -xc99=all to -xc99=all,no_lib. This permitted the configure to complete. Then I ran /usr/sfw/bin/gmake and it progressed until I received the following message: Making all in src gmake[2]: Entering directory `/home/peterp/src/coreutils-8.5/src' gmake all-am gmake[3]: Entering directory `/home/peterp/src/coreutils-8.5/src' CCLD chroot Undefined first referenced symbol in file eaccess ../lib/libcoreutils.a(euidaccess.o) ld: fatal: Symbol referencing errors. No output written to chroot What could cause this problem? PS I was only compiling coreutils because I wanted colour ls.

  Read the article

• come on!teach u save photos from iphone to computer

  - by goodm

  i am using iphone ,when we have fun,we took a lot of nice pics ,but,that is a question,how to transfer photos from iphone to computer,now ,let me show you,step by step: Step 1: Download Tansee iPhone Transfer Photo free trial version here,and then install it. You also need iTunes above 7.3 installed.or download at: http://www.softseeking.com/prodail.aspx?proid=74 Step 2: Connect iPhone to your computer. Step 3: Launch Tansee iPhone Transfer Photo and all the photos in your iPhone will display automatically, Step 4: Select the photos to be transferred to your computer, the selected file will marked with red border. You can select photos by click on each one, or just drag a rectangle to select a bundle of photos. You can also select all photos by click right button of your mouse or click "File" to choose. Note: you can only select first 6 photos if you haven't purchase. Step 5: Click "Copy" button to select output path and start to transfer photos to your computer: iPhone Camera Photo & Camera Video: Click "Camera Roll", do as steps above can copy your iPhone Camera Photos and iPhone Camera Videos to PC. Options Setting 1.Backup File Format: To select backup photo file format, Tansee iPhone Transfer Photo support BMP and JPG file now. 2.Backup Path: To select directory for storing the backup photos. You can select backup directory for each photo during backup by check "Ask Every Time" or store all files in a specified directory by checking "Save Here" and select the directory in the edit box. 3.Backup Resolution: To select the photo size to be backup.

  Read the article

• CSS and JS files not being updated, supposedly because of Nginx Caching

  - by Alberto Elias

  I have my web app working with AppCache and I would like that when I modify my html/css/js files, and then update my Cache Manifest, that when the user accesses my web app, they will have an updated version of those files. If I change an HTML file, it works perfectly, but when I change CSS and JS files, the old version is still being used. I've been checking everything out and I think it's related to my nginx configuration. I have a cache.conf file that contains the following: gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon; location ~ \.(css|js|htc)$ { expires 31536000s; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; } location ~ \.(html|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml)$ { expires 3600s; add_header Pragma "public"; add_header Cache-Control "max-age=3600, public, must-revalidate, proxy-revalidate"; } And in default.conf I have my locations. I would like to have this caching working on all locations except one, how could I configure this? I've tried the following and it isn't working: location /dir1/dir2/ { root /var/www/dir1; add_header Pragma "no-cache"; add_header Cache-Control "private"; expires off; } Thanks

  Read the article

• Possible boot conflict?

  - by Evan Kroske

  I was installing Ubuntu on a computer on which Windows XP was already installed. The computer has multiple hard drive bays, so I decided to remove the XP HDD and install Ubuntu on a blank HDD when it was the only HDD in the system. Unfortunately, if I now try to boot Ubuntu with the Windows XP drive in the second slot, nothing will boot. However, if Windows XP is in the first slot, it will boot fine. Can anybody explain why this happens? When I was checking out the BIOS to see if something was messed up, I discovered that when Ubuntu is in the first slot, the BIOS doesn't recognize any HDDs. However, if XP is in the first slot, the BIOS recognizes both drives. Any hypotheses about why this happens? Edit: Here's the setup. I have an old server with seven SCSI HDD slots. I have five identical 68 Gb SCSI drives, but I can keep only two plugged in. XP is still installed on the first drive, but I reinstalled Ubuntu on the second drive and had Grub overwrite the XP bootloader on the first drive. Now, the setup works fine, and I can use Grub to load either XP or Ubuntu. However, if I plug in another identical blank HDD in the third slot, the computer recognizes only the XP drive and doesn't boot. Grub starts to load, then gives me a "disk not found" error. Running ls from the grub rescue prompt only shows one drive with two partitions. I guess this is a BIOS problem, but I'd still like to know what triggers it. What about a blank drive could cause the BIOS to freak out?

  Read the article

• VirtualBox VM running web server not accessible via external IP

  - by mwigdahl

  I have a Windows 7 machine running VirtualBox with an Ubuntu guest. The guest has a Bitnami LAMP stack installed. I have the guest configured for Bridged networking, and I can access the guest web server just fine from other machines on my LAN using the guest's IP. I'm trying to configure port forwarding so that I can access the web server from outside my LAN. (The router is a 2WIRE model as I'm on ATT's UVerse). I've set up port forwarding for ports 80 and 443 to the guest's IP in a similar manner to how I had them set up for my previous, physical web server, which worked just fine. However, I cannot seem to access the new, virtual web server using my external IP on the forwarded port. I suspected Windows Firewall issues on the host, but disabling it didn't solve the issue. Anyone have advice on what I should try next? EDIT: I've now attempted disabling the firewall on the guest with sudo ufw disable -- that doesn't seem to help either. However, after checking the router's port forwarding in more detail I may see the problem. My VM is named "linux" and in the router's configuration pages it shows up inconsistently. Sometimes it reports with a valid LAN IP and other times it doesn't show up with any IP. Even when it shows the correct IP the router indicates that it is disconnected. Could this be an indication that the 2WIRE router doesn't play well with VirtualBox's bridged networking mode?

  Read the article

• running chkdsk /F on a large mounted NTFS image file gets BSOD (Windows Vista)

  - by Citizentools

  Using ddrescue, I've created ISO files from the C: and D: drives on my Windows XP laptop's harddisk (after the laptop stopped booting and chkdsk etc. wouldn't fix it). I was able to mount the 60 GB D.iso file use OSFmount, and successfully recreated the D: drive on another laptop. The C.iso image is more problematic. ddrescue left about 3mb unrecovered of 85 GB total, after multiple passes (no big worries about this) and I'm able to mount it with OSFmount on a Windows Vista laptop. However, when I run chkdsk /F /V on the mounted drive (which was mounted as H:), I consistently get a blue screen (BSOD). CHKDSK makes it through the first three passes, including index fixing and security descriptor fixes, without errors, but triggers a BSOD when it attempts to fix the volume records or bitmap If I attempt to fix the drive by clicking on Properties-Tools-Error checking-Check Now-Automatically fix file system errors, I get an alert box reading "WIndows was unable to complete the disk check." I'd try a tool other than OSFMount, but it's the only thing I've found so far that will mount large ISO files, and it has worked for me up to now in this process. [Update 2011-11-13 18:41 EST] Just ran the same process using the original Windows XP laptop, with a different internal drive, and chkdsk worked like a champ. So the question is still interesting, but decidedly less urgent.

  Read the article

• Service nginx reload: unexpected error

  - by Anna

  I'm trying to install wordpress on my nginx server by following this tutorial: http://premium.wpmudev.org/blog/how-to-setup-your-own-nginx-powered-wordpress-server/ However, the last command at step 7 gave me a strange error: service nginx reload A copy-paste from my terminal: root@server:~# service nginx reload Reloading nginx configuration: nginx: [emerg] unexpected "o" in /etc/nginx/sites-enabled/wordpress:7 nginx: configuration file /etc/nginx/nginx.conf test failed When I nano into sites-enabled/wordpress, on the 7th line I can't find anything strange: <!DOCTYPE html> <html class=" "> <head prefix="og: http://ogp.me/ns# fb: http://ogp.me/ns/fb# object: http://ogp.me/ns/object# article: http://ogp.me/ns/article# profile: http://ogp.me/ns/profile#"> <meta charset='utf-8'> <meta http-equiv="X-UA-Compatible" content="IE=edge"> Also, I don't see any obvious errors in my nginx.conf file, but maybe I'm not checking something? The first couple of lines of the nginx config file: user www-data; worker_processes 4; pid /var/run/nginx.pid; events { worker_connections 768; # multi_accept on; } Any help is appreciated, thanks a lot in advance!

  Read the article

• Ext3 fs: Block bitmap for group 1 not in group (block 0). is fs dead?

  - by ip

  My company has a server with one big partition with Mysql database and php files. Now this partition seems to be corrupted, as reported from kernel messages when I tried to mount it manually: [329862.817837] EXT3-fs error (device loop1): ext3_check_descriptors: Block bitmap for group 1 not in group (block 0)! [329862.817846] EXT3-fs: group descriptors corrupted! I've tried to recovery it running tools from a PLD livecd. These are the tools I have tested: - e2retrieve - testdisk - photorec - dd_rescue/dd_rhelp - ddrescue - fsck.ext2 - e2salvage without any success. dumpe2fs 1.41.3 (12-Oct-2008) Filesystem volume name: /dev/sda3 Last mounted on: <not available> Filesystem UUID: dd51610b-6de0-4392-a6f3-67160dbc0343 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal filetype sparse_super Default mount options: (none) Filesystem state: not clean with errors Errors behavior: Continue Filesystem OS type: Linux Inode count: 9502720 Block count: 18987570 Reserved block count: 949378 Free blocks: 11555345 Free inodes: 11858398 First block: 0 Block size: 4096 Fragment size: 4096 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 16384 Inode blocks per group: 512 Last mount time: Wed Mar 24 09:31:03 2010 Last write time: Mon Apr 12 11:46:32 2010 Mount count: 10 Maximum mount count: 30 Last checked: Thu Jan 1 01:00:00 1970 Check interval: 0 (<none>) Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 128 Journal inode: 8 Journal backup: inode blocks dumpe2fs: A block group is missing an inode table while reading journal inode e2fsck 1.41.3 (12-Oct-2008) fsck.ext3: Group descriptors look bad... trying backup blocks... fsck.ext3: A block group is missing an inode table while checking ext3 journal for /dev/sda3 I tried also backup superblocks, same error result. There's any other tools I have to test before considering these disk definitely unrecoverable? Many thanks, ip

  Read the article

• Server stops responding, can't find issue?

  - by Corey W

  I've had a pretty basic server up and running CentOS with webserver/database, and have noticed that it has locked up a few times in the middle of the night. It seems to happen randomly. When it locks up I can ssh in, (although it seems to hang once connected), but can't access cpanel/whm and have to reboot the server to get everything back up. Checking the messages log I see the below like clockwork every 5minutes 1 second, and then it just stops logging anything until I reboot. I can't seem to find any log showing any issue? Is there somewhere I can check to try to figure out what is happening? Could this be caused by CPU being maxed? Nov 17 08:01:35 s1 pure-ftpd: (__cpanel__service__auth__ftpd__Q13SKrtaCJCHjBezTfU8Iqmsi@127.0.0.1) [INFO] Logout. Nov 17 08:06:36 s1 pure-ftpd: ([email protected]) [INFO] New connection from 127.0.0.1 Nov 17 08:06:36 s1 pure-ftpd: ([email protected]) [INFO] __cpanel__service__auth__ftpd__mxidFBSnQXmR0QzqSxlqrXLIH0CmJ0GPh9bZ5V3 is now l ogged in Nov 17 08:06:37 s1 pure-ftpd: (__cpanel__service__auth__ftpd__mxidBDaCgnqSxlqrXLIH0CmJ0GPh9bZ5V3@127.0.0.1) [INFO] Logout. Nov 17 08:11:37 s1 pure-ftpd: ([email protected]) [INFO] New connection from 127.0.0.1 Nov 17 08:11:38 s1 pure-ftpd: ([email protected]) [INFO] __cpanel__service__auth__ftpd__T4B7F71acf1dsdJSeJHdqKNcbOdpzNnN_GttgcM is now l ogged in Nov 17 08:11:38 s1 pure-ftpd: (__cpanel__service__auth__ftpd__T4B7F71acf1KNcbOdpzNnN_GttgcM@127.0.0.1) [INFO] Logout. Nov 17 08:16:38 s1 pure-ftpd: ([email protected]) [INFO] New connection from 127.0.0.1 Nov 17 08:16:38 s1 pure-ftpd: ([email protected]) [INFO] __cpanel__service__auth__ftpd__W5C1RzumtaNwe4cU8Lt1 is now logged in Nov 17 08:16:38 s1 pure-ftpd: ([email protected]) [INFO] Logout. Nov 17 09:10:58 s1 kernel: imklog 4.6.2, log source = /proc/kmsg started. Nov 17 09:10:58 s1 rsyslogd: [origin software="rsyslogd" swVersion="4.6.2" x-pid="1094" x-info="http://www.rsyslog.com"] (re)start Nov 17 09:10:58 s1 kernel: Initializing cgroup subsys cpuset

  Read the article

• Does Antivirus2009 or Antivirus360 automatically install on your computer and if so how?

  - by sergey

  I run Firefox on Vista, and unfortunately I got tricked (through a deceptive google result) into going to a page containing one of those fake "Your Computer Has all of this Spyware on it!" pages. I tried manually closing the tab, but it had a "Are you sure you want to navigate away" JavaScript alerts (HATE THOSE). So I clicked "OK," and the tab closed. Then I closed firefox altogether and rebooted. Now, before I could close the tab, it did prompt me to download a file, but of course I choose not to, and checking my downloads folder, nothing new is there. Also, even if I ?did? download it, ?I? would still have to choose to run it by double clicking on it for it to install itself, right? Also, I ran Malware Bites and Windows Defender and both said everything was fine. From this I would normally believe I am safe, but I have read everywhere that this thing "automatically installs" itself and that it is a bitch to get rid of. Is it really possible for this thing to dig in if you are running firefox and didn't choose to download it or run it after downloading?

  Read the article

• SeLinux blocking connection to sshd on Ubuntu 9.10

  - by Barton Chittenden

  When I try to log on to my laptop, which runs Ubuntu 9.10, the server rejects my login attempts. Checking /var/log/auth.log, I see the following: Feb 14 12:41:16 tiger-laptop sshd[6798]: error: ssh_selinux_getctxbyname: Failed to get default SELinux security context for tiger I googled for this, and ran across the following: http://www.spinics.net/lists/fedora-.../msg13049.html Here's the part that I think relates to the problem that I'm having: Quote: What's wrong on my system? Why it's not possible to login even if selinux is in permissive mode? Any suggestions? I'd start by trying to figure out why sshd isn't running in sshd_t (it seems to be running in sysadm_t). Paul. selinux mailing list selinux@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mail...stinfo/selinux Yes, sshd is running in sysadm_t: ps axZ | grep sshd system_u:system_r:sysadm_t 3632 ? Ss 0:00 /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pi ls -Z /usr/sbin/sshd system_ubject_r:sshd_exec_t /usr/sbin/sshd Don't know why it's not sshd_t. I didn't modified something. It's a standard installation of sles11 with the default reference policy from tresys. Maybe this code snippet from policy/modules/services/ssh.te is responsible for that: Allow ssh logins as sysadm_r:sysadm_t gen_tunable(ssh_sysadm_login, true) Any ideas? Do you have boolean init_upstart set to on? if not try setting it to on. I do not believe ssh_sysadm_login boolean works currently but i may be mistaken. -- Yeah, setting init_upstart to on did the trick! THANK A LOT! Do you know why this prevents the user from logging in through ssh even if selinux is set to permissive?? Ok, so the million dollar question is "where do I set 'init_upstart=1'"? It's not clear from context which configuration file needs to be edited, and I'm not at all familiar with SELinux configuration.

  Read the article

• Can't find gnutls ibrary when executing rpmbuild under non-root

  - by Rilindo

  I am trying to build ntgs from the latest source, using the .spec from rpmforge - as non-root via rpmbuild. During the compile, it fails at this step: checking for GNUTLS... no configure: error: ntfsprogs crypto code requires the gnutls library. error: Bad exit status from /var/tmp/rpm-tmp.78913 (%build) However, I can compile it successfully outside of rpmbuild. So it sounds like it just the matter of library being seen during the build. However, I can confirm that rpmbuild can see the library that gnutls resides: [foo@bar ~]$ rpmbuild -E '%{_libdir}' rpmbuild/SPECS/ntfsprogs.spec /usr/lib Library location: [foo@bar ntfs-3g_ntfsprogs-2012.1.15]$ /sbin/ldconfig -p | grep -i gnutls libgnutls.so.13 (libc6) => /usr/lib/libgnutls.so.13 libgnutls.so (libc6) => /usr/lib/libgnutls.so libgnutls-openssl.so.13 (libc6) => /usr/lib/libgnutls-openssl.so.13 libgnutls-openssl.so (libc6) => /usr/lib/libgnutls-openssl.so libgnutls-extra.so.13 (libc6) => /usr/lib/libgnutls-extra.so.13 libgnutls-extra.so (libc6) => /usr/lib/libgnutls-extra.so What would cause the problem of the library not being seen when you build a RPM? EDIT: Oh yeah, I am running Centos 5.5.

  Read the article

• How to take screenshots of WPF applications in correct size and content

  - by Thomas W.

  I usually take screenshots of single windows via the built-in key combination Alt+Print. Unfortunately this does not work well for more and more applications - all of them are WPF applications. Usually the screen shots have at least one of the following properties: the screenshot is larger than expected and contains parts of the screen around the actual window the screenshot has the correct size but includes parts of other windows, e.g. the Windows task bar. Of course the task bar might be in front of the window, but taking screen shots of "normal" programs works fine. How do I take screenshots of WPF application which are correct in size and content? I'd like to avoid the extra effort of checking all the screenshots for correctness, reproducing the situation, taking them again in case of issues or repairing/faking them manually in any pixel manipulation program (e.g. Paint.NET). I observe this on Windows 7 x64 SP 1, all official updates installed, but it might apply to other Windows versions as well (not tested yet). .NET 4.5 is installed. The application itself might only need the built-in .NET 3.5.1. It's reproducible on a virtual machine with the same settings. Examples: Screenshot of an application running in maximized mode. The screen shot includes parts of the task bar. Screenshot of a progress dialog which is behind the task bar. The screenshot also includes the task bar, while it doesn't for non WPF applications.

  Read the article

• Install VirtualBox on Ubuntu 12.04.1 (on [Samsung] Chromebook)

  - by iphonedev7

  I have dual booted Ubuntu Linux 12.04.1 LTS on my Samsung Series 5 ChromeBook, and am trying to run/install Oracle VirtualBox (from the generic .run file downloaded from their website). However, every time I try to run it (as root from the command line), it gives me the following error occurs: Please install the build and header files for your current Linux kernel. The current kernel version is 3.4.0 Problems were found which would prevent VirtualBox from installing. I have tried the version from the Software Center, as well as the command line installation, both of which gave me errors based on my linux-headers/linux-kernel/linux-[kernel]-image. Here's an error I keep getting (on the command line): First Installation: checking all kernels... It is likely that 3.4.0 belongs to a chroot's host Building only for 3.5.0-18-generic Building initial module for 3.5.0-18-generic ERROR (dkms apport): kernel package linux-headers-3.5.0-18-generic is not supported Error! Bad return status for module build on kernel: 3.5.0-18-generic (x86_64) Consult /var/lib/dkms/virtualbox/4.1.12/build/make.log for more information. Setting up virtualbox-qt (4.1.12-dfsg-2ubuntu0.2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place ...And one of the more cryptic errors I get when trying to start any Virtual Machine: Result Code: NS_ERROR_FAILURE (0x80004005) Component: Machine Interface: IMachine {5eaa9319-62fc-4b0a-843c-0cb1940f8a91}

  Read the article

• Did chkdsk make it harder to restore files?

  - by neyl

  My friend asked me to try and fix his loaded Sansa Clip + which wasn't playing. After opening it in MSC mode I discovered that the Music directory was empty and total of all files was only a few MB. However Disk properties showed me that it was 7Gb full. I then ran Tools - Error Checking and Windows dutifully informed me that disk was corrupt and I should run again Allowing Windows to Fix Errors. I did that and it told me everything was fixed and that all files were placed in FOUND.000 Dir. FOUND.000 was about 7.5 GB with FILE0000-1546 . CHK. (I am aware of methods like ChkBack to scan and convert to mp3 etc BUT Original filenames and structure needed!) Now I started getting worried that I made things worse! I have plenty of experience with Data Recovery Programs - Recuva, Restore My Files etc. and I was anyhow planning to use them to scan the drive. But NOW after CHKDSK "fixed" the drive maybe it modified critical FAT information vital for data recovery. So I run these programs and 0!!!. No trace of files! I tried a ton of Recovery Programs with same results TILL EaseUS Data Recovery Wizard found all files and I purchased program for $55! My Question In your opinion - did running CHKDSK with automatic fixing of errors make matters worse (i.e. many data recovery progs. didn't find a trace and they would have done if not for chkdsk) or was the filesystem too corrupt anyhow for regular File Recovery Progs.? If I would be a Professional - would I be responsible for running CHKDSK - automatic Fixing. Do you know of a better Data Recovery Program than EaseUs Data Recovery wizard - According to my experience I haven't found better!? Thanks

  Read the article

• PHP displays blank white page even with all error reporting enabled

  - by Andy Shinn

  I am trying to debug a broken page in a Drupal application and am having a hard time getting PHP to spit anything useful out. I have the following set: error_reporting = E_ALL display_errors = On display_startup_errors = On log_errors = On error_log = /var/log/php/php_error.log I have a file showing me phpinfo() which confirms these variables are set correctly for the environment. I have increased memory_limit to 256M (which should be more than enough). Yet, the only indication I get is a status 500 code in the apache access log and a blank white page from PHP. The Apache virtual host has LogLevel set to debug and the error log only outputs: [Sat Jun 16 20:03:03 2012] [debug] mod_deflate.c(615): [client 173.8.175.217] Zlib: Compressed 0 to 2 : URL /index.php, referer: http://ec2-174-129-192-237.compute-1.amazonaws.com/admin/reports/updates [Sat Jun 16 20:03:03 2012] [error] [client 173.8.175.217] File does not exist: /var/www/favicon.ico [Sat Jun 16 20:03:03 2012] [debug] mod_deflate.c(615): [client 173.8.175.217] Zlib: Compressed 42 to 44 : URL /favicon.ico The PHP error log outputs nothing at all. kernel and syslog show nothing related to Apache or PHP. I have also tried installing suphp and checking its log just confirms the user is executing correctly: [Sat Jun 16 20:02:59 2012] [info] Executing "/var/www/index.php" as UID 1000, GID 1000 [Sat Jun 16 20:05:03 2012] [info] Executing "/var/www/index.php" as UID 1000, GID 1000 This is on Ubuntu 12.04 x86_64 with the following PHP modules: ii php5 5.3.10-1ubuntu3.1 server-side, HTML-embedded scripting language (metapackage) ii php5-cgi 5.3.10-1ubuntu3.1 server-side, HTML-embedded scripting language (CGI binary) ii php5-cli 5.3.10-1ubuntu3.1 command-line interpreter for the php5 scripting language ii php5-common 5.3.10-1ubuntu3.1 Common files for packages built from the php5 source ii php5-curl 5.3.10-1ubuntu3.1 CURL module for php5 ii php5-gd 5.3.10-1ubuntu3.1 GD module for php5 ii php5-mysql 5.3.10-1ubuntu3.1 MySQL module for php5 So, what am I missing here? Why no error reporting?

  Read the article

• Upstart can't determine my process' pid

  - by sirlark

  I'm writing an upstart script for a small service I've written for my colleagues. My upstart job can start the service, but when it does it only outputs queryqueue start/running; note the lack of a pid as given for other services. #/etc/init/queryqueue.conf description "Query Queue Daemon" author "---" start on started mysql stop on stopping mysql expect fork env DEFAULTFILE=/etc/default/queryqueue umask 007 kill timeout 30 pre-start script #if [ -f "$DEFAULTFILE" ]; then # . "$DEFAULTFILE" #fi [ ! -f /var/run/queryqueue.sock ] || rm -rf /var/run/queryqueue.sock #exec /usr/local/sbin/queryqueue -s /var/run/queryqueue.sock -d -l /tmp/upstart.log -p $PIDFILE -n $NUM_WORKERS $CLEANCACHE $FLUSHCACHE $CACHECONN end script script #Originally this stanza didn't exist at all if [ -f "$DEFAULTFILE" ]; then . "$DEFAULTFILE" fi exec /usr/local/sbin/queryqueue -s /var/run/queryqueue.sock -d -l /tmp/upstart.log -p $PIDFILE -n $NUM_WORKERS $CLEANCACHE $FLUSHCACHE $CACHECONN end script post-start script for i in `seq 1 5` ; do [ -S /var/run/queryqueue.sock ] && exit 0 sleep 1 done exit 1 end script The service in question is a python script, which when run without error, forks using the code below right after checking command line options and basic environmental sanity, so I tell upstart to expect fork. pid = os.fork() if pid != 0: sys.exit(0) The script is executable, and has a python shebang. I can send the TERM signal to the process manually, and it quits gracefully. But running stop queryqueue claims queryqueue stop/waiting but the process is still alive and well. Also, it's logs indicate it never received the kill signal. I'm guessing this is because upstart doesn't know which pid it has. I've also tried expect daemon and leaving the expect clause out entirely, but there's no change in behaviour. How can I get upstart to determine the pid of the exec'd process

  Read the article

• Connect to Apache times out randomly

  - by Amadan

  We are trying to set up an Apache server on a remote machine, but we experience strange behaviour. Checking with telnet remote.machine 80, one of these things happen randomly: Connect and serve content normally (no delay) Connect after a long pause Connect normally, then time out without response Timeout on connect Once connected, the request seems to be processed normally. These things do not occur if I connect from that machine directly to localhost 80. The Apache is dedicated, as is the server it runs on (runs only this one application, no-one else is using it for anything else). I am not an administrator of the remote site, and I do not know the network architecture over there, but apparently it's firewalled: (HTTP port is open, SSH port is IP-restricted, most others are closed). If there was any one pattern, I might have some ideas, but this variety of symptoms baffles me. Any ideas as to what could be causing this? Apache is 2.2; Server version is: Linux version 2.6.9-22.ELsmp ([email protected]) (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Sep 19 18:32:14 EDT 2005

  Read the article

• Has anyone had luck running 802.1x over ethernet using the stock Windows or other free supplicant?

  - by maxxpower

  I just wanted to see if anyone else has had luck implementing 802.1x over ethernet. So here's my basic setup. Switch sends out 3 eapol messages spaced out 5 seconds apart. if there's no response the machine gets put on a guest vlan with restricted access. If the machine is properly configured it will authenticate and be placed into a secure vlan. About 10% of my windows xp users are getting self assigned 169 addresses. I've used the Odyssey Access Client and it worked without a hitch. I'm using the setting to automatically use the users windows login to authenticate, but it's workign on 90% of the machines so I don't think that's the issue. Checking the logs on the dc it seems that the machines are trying to authenticate with computer credentials even though they are configured not to. I'm running Juniper switches with IAS for radius. I have radius configured for PEAP and MSvhapv2. Macs and linux boxes seem to have no issues authenticating. One last thing to add If I unplugging the ethernet cable and plug it back in usually resolves the issue, but I'd hardly call that acceptable for production. Kinda long winded and specific for a discussion, but just want to see if anyone else has had similar issues or experiences, or if anyone knows of a free XP supplicant that actually works with 802.1x over ethernet.

  Read the article

< Previous Page | 709 710 711 712 713 714 715 716 717 718 719 720  | Next Page >