Search Results

Search found 20281 results on 812 pages for 'software engineer'.

Page 722/812 | < Previous Page | 718 719 720 721 722 723 724 725 726 727 728 729  | Next Page >

  • Is my motherboard failing, or is there some other issue?

    - by ThatGuy
    So, several months ago I put together my own desktop PC. I set up a dual boot to Windows and Ubuntu. Recently, without changing any settings or installing anything new, the wifi stopped working on windows (I use a wifi adapter). It said it was connected, Network settings showed that it was working and running trouble shooting had no results. My internet still works on any other device. I found that removing the adapter from the motherboard and plugging it back in was the only thing that fixed the problem. Reinstalling the wifi drivers did not help. I purchased a new Wifi adapter, but the problem persists. More recently, I had a much more discouraging development. Sometimes, turning on the computer results in a boot loop: BIOS never starts. Instead, the monitor turns on as if it got a signal, then immediately turns off. This loops on it's own indefinitely until I hold down power, hard reset it, and try again. Sometimes it works, sometimes it doesn't. I haven't tested much on the Ubuntu side. It appears that wifi works at least some of the time, but since I've had issues just getting to BIOS I'm not confident the issue is on the software side. I've also noticed issues with some of the USB ports no longer working, but that seems to be off and on. Finally, as of a few minutes ago, I booted to windows to discover that everything was running very slowly. Slow here is a relative word, but I have a Samsung 840 pro SSD and I'm used to applications running nigh instantly, and it was a solid 3 minutes before any of my applications would load. Anyway, my question is this: Is it likely that my motherboard is failing? Either way, what steps can I take to try and pin down the problem and figure out what to do?

    Read the article

  • Windows 7 / TCP/IP network share guide - looking for to resolve failure to mount lacie network drive but works on XP,Linux,Mac.

    - by Rob
    Can anyone advise me of a really good, readable, Windows 7 TCP/IP network share guide, book, or reference. I want this because I cannot mount my Lacie 2big ethernet network drive in Windows 7 (32 bit home), but I can mount it in Windows XP Home 32bit, Ubuntu Linux 10.04 and Apple MacOS X. This drive is being mounted via the accompanying Lacie Ethernet Agent in XP (which I believe uses "Bonjour" protocol), on Mac and Linux it works without further need for software. Another Super User user has the same problem, but no answer: Trouble accessing network drives in Windows 7 I hope my take on the question shows a better willingness to investigate and do some digging - and therefore invite some suggestions to help with this. The drive is detected by Windows 7 (i.e. speech bubble "network drive found") but on trying to open an Explorer window, this remains blank with the Windows busy pointer. I'd prefer not to reinstall Windows 7 to see if that cures the problem, I'd rather understand what is happening/not happening, perhaps even compare differences with Windows XP. Suggestions, please for such guides or even the original problem itself. Update Edit Rewrote question more comprehensively here: Mhttp://superuser.com/questions/304209/looking-for-definitive-answer-to-accessing-a-network-share-via-windows-7-home-and

    Read the article

  • All computers on network get stuck waiting for some sites indefinetely

    - by zacaj
    This happens across three computers, running windows 7 and Ubuntu, firefox, opera, and chrome (all latest versions). I am connected to the internet through a Verizon wireless usb modem. When I try to open some web pages they will never finish loading (and usually never even show anything). The status bar at the bottom of the browser will display "Waiting for X" The servers it gets stuck on include: platform.twitter.com s7.addthis.com connect.facebook.net ajax.googleapis.com 2mdn.net Ive been getting away with just blocking them in AdBlock up until now, however the last two have been causing problems. There are some sites which require googleapis.com to load correctly, and some that wont ever load unless its blocked. eBay requires access to 2mdn.net to load pictures. On top of this its getting really annoying having to update AdBlock across all these computers whenever a new site pops up. I'm hoping there's some easier way to fix this? The different sites causing the freeze indicate to me that it's either a problem on my end (somehow?) or some server side software that got updated with a new bug?

    Read the article

  • What can inexperienced admin expect after server setup completed seemingly fine? [closed]

    - by Miloshio
    Inexperienced person seems to have done everything fine so far. This is his very first time that he is the only one in charge for LAMP server. He has installed OS, network, Apache, PHP, MySQL, Proftpd, MTA & MDA software, configured VirtualHosts properly (facts because he calls himself admin), done user management and various configuration settings with respect to security recommendations and... everything is fine for now... For now. If you were directing horror movie for server admin above mentioned what would you make up for boogieman that showed up and started to pursue him? Omitting hardware disaster cases for which one cannot do anything 'from remote', what is the most common causes of server or part-of-server or server-related significant failure when managed by inexperienced admin? I have in mind something that is newbie admins very often missing which is leading to later intervention of someone with experience? May that be some uncontrolled CPU-eating leftover process, memory-related glitch, widely-used feature that messes up something unexpected on anything like that? Newbie admin for now only monitors disk-space and RAM usage, and number of running processes. He would appreciate any tips regarding what's probably going to happen to his server over time.

    Read the article

  • Why is my rsync so slow?

    - by iblue
    My Laptop and my workstation are both connected to a Gigabit Switch. Both are running Linux. But when I copy files with rsync, it performs badly. I get about 22 MB/s. Shouldn't I theoretically get about 125 MB/s? What is the limiting factor here? EDIT: I conducted some experiments. Write performance on the laptop The laptop has a xfs filesystem with full disk encryption. It uses aes-cbc-essiv:sha256 cipher mode with 256 bits key length. Disk write performance is 58.8 MB/s. iblue@nerdpol:~$ LANG=C dd if=/dev/zero of=test.img bs=1M count=1024 1073741824 Bytes (1.1 GB) copied, 18.2735 s, 58.8 MB/s Read performance on the workstation The files I copied are on a software RAID-5 over 5 HDDs. On top of the raid is a lvm. The volume itself is encrypted with the same cipher. The workstation has a FX-8150 cpu that has a native AES-NI instruction set which speeds up encryption. Disk read performance is 256 MB/s (cache was cold). iblue@raven:/mnt/bytemachine/imgs$ dd if=backup-1333796266.tar.bz2 of=/dev/null bs=1M 10213172008 bytes (10 GB) copied, 39.8882 s, 256 MB/s Network performance I ran iperf between the two clients. Network performance is 939 Mbit/s iblue@raven $ iperf -c 94.135.XXX ------------------------------------------------------------ Client connecting to 94.135.XXX, TCP port 5001 TCP window size: 23.2 KByte (default) ------------------------------------------------------------ [ 3] local 94.135.XXX port 59385 connected with 94.135.YYY port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.09 GBytes 939 Mbits/sec

    Read the article

  • Windows 7 not booting after failed SRT (SSD caching) install

    - by david
    This is a fairly new computer, only about a month old. i7 2700k, z68 motherboard, with a 1.5tb WD black HD, and a 128gb crucial M4 ssd. I followed the instructions for setting up ssd caching, the SATA controller was set to RAID, I installed the intel software and enabled acceleration and it said everything went fine. But when I went to reboot, I received the lovely "Reboot and Select proper Boot device" error message. I checked the bios, and it was booting from the correct HD (I tried the only other option anyway just in case, it was the ~50 odd gb of unformatted space left on the SSD) AFter that I entered the raid until (ctrl-i at boot) and removed the acceleration and deleted the raid array (because it was being used as a cache this was non destructive) Still no boot. So I reinstalled win7 directly on the SSD, booted, and checked the HDD to make sure it hadn't been wiped. It hadn't, all the files were still there, including all the windows stuff. I backed up my data to an external drive just in case, but I'd really like to get this install booting again. I trawled the webs a bit, and have tried entering recovery mode and using the bootrec.exe and bootsect.exe to fix it, but to be honest I'm not sure what I'm doing with those. My question is basically: How do I make my harddrive bootable again?

    Read the article

  • Apache https is slow

    - by raucous12
    Hey, I've set apache up to use SSL with a self signed certificate. With https (KeepAlive on), I can get over 3000 requests per second. However, with https (KeepAlive off), I can only get 13 requests per second. I know there is supposed to be a bit of an overhead, but this seems abnormal. Can anyone suggest how I might go about debugging this. Here is the ab log for https: Server Software: Apache/2.2.3 Server Hostname: 127.0.0.1 Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,DHE-RSA-AES256-SHA,4096,256 Document Path: /hello.html Document Length: 29 bytes Concurrency Level: 5 Time taken for tests: 30.49425 seconds Complete requests: 411 Failed requests: 0 Write errors: 0 Total transferred: 119601 bytes HTML transferred: 11919 bytes Requests per second: 13.68 [#/sec] (mean) Time per request: 365.565 [ms] (mean) Time per request: 73.113 [ms] (mean, across all concurrent requests) Transfer rate: 3.86 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 190 347 74.3 333 716 Processing: 0 14 24.0 1 166 Waiting: 0 11 21.6 0 165 Total: 191 361 80.8 345 716 Percentage of the requests served within a certain time (ms) 50% 345 66% 377 75% 408 80% 421 90% 468 95% 521 98% 578 99% 596 100% 716 (longest request)

    Read the article

  • Workaround for Dell "Power Supply Not Recognised" issue

    - by Haedrian
    So, I have a Dell Inspirion and the power supply port appears to be damaged. Basically when I plug it in I get a nice popup telling me that it couldn't detect that its a Dell power supply so it won't charge the battery and underclocks the system. It still works for other purposes (that is, giving power) I thought it was the actual power supply cable so I bought a new one, that worked for a while, provided I inserted it at JUST THE RIGHT angle. But now that's not working anymore, so I assume its the part which connects to the computer. The battery charging I can live without, the underclocking I can't. I'd like a way around this issue. Things I've tried: Updating the BIOS Replacing the power supply cable Inserting it at different angles Turning it off and on again Swearing at it Twisting it while inserting it So, is there a workaround somehow? I'd like to avoid taking out my soldering kit and risking permanently damaging expensive equipment if that's allright. I'm hoping for a software solution. Added: The exact model is a Del Inspirion N5010

    Read the article

  • Strange boot problems on 6 month old setup

    - by Balefire
    I've already exhausted my knowledge on this one, so forgive me if this post is a bit long. I built a computer 6 months ago for my wife and it worked fine until last week. Then it randomly shut down and would lock up while trying to boot on the boot screen. I cleared cmos and it allowed me to do startup recovery, but it "failed to fix the issue" so I reinstalled windows on the HD (moving the old install to windows_old). It worked, so I started installing drivers again, but then when I restarted to finalize installations it locked up again. This time, I took the hard drive and hooked it up to my computer, backed up all her files, and then formatted the hard drive before reinstalling it. (again had to clear cmos to let me boot from disk) It installed windows, I installed drivers, and it worked for a few hours but then died during startup again. So, then I got a new HD, cleared cmos, and installed clean again, with the same result as the time before, it worked for a few hours, installed windows updates, then crashed on the 3rd or 4th time turning it on. I decided next to try reinstalling and then going online to see if there were any updates for the BIOS or drivers on the Motherboard, but now I can't get it to even bring up the boot menu, so now I'm just left wondering was it the motherboard, or is it the CPU, or the RAM? The problem was strangely intermittent so I thought it had to be a software issue, since a hardware issue would ALWAYS fail to boot, right? But now it seems to be a hardware issue, because it's not bringing up anything. Any suggestions? System: Windows 7 64-bit 970A-DS3 Gigabyte Motherboard AMD Phenom II X4 955 Deneb 3.2GHz Quad core Proc GeForce GT 430 (Fermi) 1GB Video Card 500W PSU 2 x G.SKILL Ripjaws X Series 4GB 240-Pin DDR3 1600 RAM

    Read the article

  • RDP suggesting a user name when connecting to a server

    - by Neolisk
    Prior to Event X, RDPing to Server 2003 always caused the user name appear blank and Login to be enabled, so you could pick to which domain you would log in. For us it's either local or our domain. Since a recent Event X a domain + user name is being suggested for every server and it's not the most recently used user name. If you remove it manually from RDP dialog, it's still being pre-populated for you, and then at the next available opportunity it returns into General/User name option of RDP dialog. So user name field comes pre-populated and you cannot change to log in locally (only if you manually erase domain specifier - everything before \) - Log in to option is disabled by default. We did not do any changes to our domain or client machines, so I am suspecting some Windows update caused it (and this being Event X). Interesting fact - it does not consistently happen on all machines, and some can login to some servers fine, while other servers keep suggesting a default user name. What could be that Event X and is there a way to fix it? EDIT: I tried this - How to clear remote desktop connections history and specifically this part of it: reg delete "HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\UsernameHint" /f The problem still persists.

    Read the article

  • Arduino IDE "launch 4j" error

    - by John
    I have a computer running Windows XP. I am trying to run the Arduino IDE 0022. I double-click on arduino.exe, it waits about 30 seconds on the load up title screen, and then it gives me this error: Launch 4j: an error occurred while starting the application My only choice is to click "OK"; the error goes away, and the Arduino IDE closes. If I try to delete the Arduino files (to try overwriting with some different files), I get an error that doesn't allow me to do so: Cannot delete awt.dll: Access denied Make sure the disk is not full or write protected and that the file is not currently in use. The only way to delete the file is by restarting the computer. So something must still be trying to run after that first error. I have noticed in Task Manager that some Java programs are still running: javaw.exe (3 processes) I think this is a problem with Java, but I checked and updated all of my Java software and it is all up to date. I have looked on other forums for this issue and none of them seemed to help. From the forums I have tried: Different Arduino IDE versions Updating Java Opening arduino.exe as Administrator Nothing has worked. Anyone have any suggestions?

    Read the article

  • Use cell formatting (e.g. "Good", "Bad", "Neutral") in formulas?

    - by ngm
    I am compiling a comparison of different pieces of software in an Excel spreadsheet. It is a big long list of features (the rows), with each column being one of the applications I'm evaluating. I've used styles to visually show how well each product meets each feature, as well as the importance of that feature, and now I'm wondering if there's a way I can use those annotations in a formula. The table is like: . | Product A | Product B | Product C Feature A | blah blah blah Feature B | blah blah blah Feature C | blah blah blah .... | .... | etc | Where I've put 'blah' in the table above, in my actual spreadsheet is (potentially lengthy) descriptive text explaining something about this feature in the given product. I've then used the styles "Good", "Neutral" and "Bad" to visually annotate the description, to show how well each product meets that feature. For each feature I've also used the styles Accent4, 60% Accent4, 40% Accent4, etc, to annotate the importance of each feature. Now I'm wondering if somehow I can use those styles (the annotations) to tot up a total score for each product. e.g., Score for feature A = valueof(60% Accent4) * valueof(Good) Is it possible at all?

    Read the article

  • Remote reboot of windows to knoppix

    - by user64452
    I am attempting to develop an Auditing application. This audit application will be employed on windows networks. The Audit will need to discover Hardware and software details of all machines attached to the network (including Printers) I do not want to have to install this application on each workstation. The audit app. needs to discover all the ip addresses of all the networked workstations. I have been prototyping this app for the last couple of months and have decided to try a new tack Is this possible? a). You have a windows network, min Windows XP sp3 and upwards b). Maximum of 100 Networked machines (if that matters) c). I need to remotely reboot each WINDOWS machine in turn on the entire network and get it to startup using UNIX, say knoppix for example! d). however the knoppix live cd is only available from one of the networked machines Questions... Morphology? Longevity? Incept dates? Cheers DD

    Read the article

  • Physical Debian to VMWare: vmware-converter, dd-image or otherwise?

    - by Dabu
    we have two debian Lenny production machines, both running larger commercial websites. Now these machines need to be moved, and in the process, they need to be virtualized to VMWare ESX. If you believe the internet information, there are several ways to accomplish this. The easiest for us would be to use our weekly dd backup where the whole disk, however, I have no experience with this kind of technology and if it is really possible. The second best way would be via an application on the source machine virtualizing it and generating an ESX compatible VM. However, the software is beta and unsupported, and after installation, nothing really works (the /etc/init.d/vmware-converter script doesn't actually do anything, start and stop reply with success messages, yet ps shows that there are no new processes). The worst way with the most work would be to install a new machine and set it up manually, copying files and databases as needed. This part is clear in it's execution, and my question(s) do not touch this. Is my 1st way possible? Has anyone done this yet, or better, has a page with instructions? Or is there a help page that explains how to correctly install, run and use the vmware-converter tool using a Debian installation (it's possible that I dod something wrong during installation already)? Thank you.

    Read the article

  • How to recover Windows Password without reinstalling if you forgot Windows password?

    - by user38908
    Usually, we can recover Windows admin password in two traditional ways. The first is to change Windows password with another admin account; the second is to recover the previous password with the windows password reset disk that had been created before you forgot the password. Take Windows XP for example, 1 At the Windows XP login prompt when the password is entered incorrectly click the reset button in the login failed window. 2 Insert the password reset diskette into the computer and click Next. 3 If the correct diskette Windows XP will open a window prompting for the new password you wish to use. However, we offen ignore the important of security until we have been locked out of computer. Fortunately, there is still the last way that can unlock your computer without reinstalling - erase Windows password with Windows password reset CD, which can recover admin password for Windows 7/XP/Vista/NT/2000/2003.... Take Windows Password unlocker for example, followings are the steps to create the reset CD 1.Download Windows Password Unlocker from Password Unlocker Official site 2.Decompress the Windows password unlocker and note that there is an .ISO image file. Burn the image file onto an blank CD with the burner freely supported by Password Unlocker. 3.Insert the newly created CD into the locked computer and re-boot it from the CD drive. 4.After launched the CD, a window pop up with all your account names(if you have several accounts) select one of the accounts that you have forgotten its password to reset it. Just one press, this software can remove Windows password instantly.

    Read the article

  • SRM 4 Test Fails with message for some VM : Error: A specified parameter was not correct.

    - by Setesh
    Here are my architecture : For the protected site 4 Host VSphere Enterprise Plus, each one with 2 HBAs FC connected to the switch fabric, connected to an EMC CX4-120 1 VCenter 1 SRM For the recovery site 2 Hosts Vsphere 4 1 Vcenter 1 SRM 1 CX-4-120 The CX4-120 is connected to the second CX4-120 with ISCSI and the MirrorView / Asynchronous. I synchronise for the time 6 Lun on a FC DAE, 2 on a S-ATA DAE I have allocated 30% of the amount synchronised LUN for the SNAPSHOT us, but I have allocated them only on my S-ATA II DAE. It does not make a problem, my snapshot are correctly active. All the installation is new (hardware and software), installed in January with the last files available in download. I have a strange problem, and it's random, sometimes when I run a test on my RP, some VMs have this error : Error: A specified parameter was not correct. I don't know where to look. Any help is appreciated... PS : I have checked on all the VMs, no Floppy disk or CD attached. PS2 : There is severals VMs with RDM and OCFS2 filesystems on it.

    Read the article

  • What Logs / Process Stats to monitor on a Ubuntu FTP server?

    - by Adam Salkin
    I am administering a server with Ubuntu Server which is running pureFTP. So far all is well, but I would like to know what I should be monitoring so that I can spot any potential stability and security issues. I'm not looking for sophisticated software, more an idea of what logs and process statistics are most useful for checking on the health of the system. I'm thinking that I can look at various parameters output from the "ps" command and compare to see if I have things like memory leaks. But I would like to know what experienced admins do. Also, how do I do a disk check so that when I reboot, I don't get a message saying something like "disk not checked for x days, forcing check" which delays the reboot? I assume there is command that I can run as a cron job late at night. How often should it be run? What things should I be looking at to spot intrusion attempts? The only shell access is SSH on a non-standard port through UFW firewall, and I regularly do a grep on auth.log for "Fail" or "Invalid". Is there anything else I should look at? I was logging the firewall (UFW) but I have very few open ports (FTP and SSH on a non standard port) so looking at lists of IP's that have been blocked did not seem useful. Many thanks

    Read the article

  • Should I buy more RAM for my computer or a better CPU?

    - by Reijer The Coder
    I have recently bought a new laptop, an ASUS N56VJ-S4149H. I bought it to use it in all possible ways I could want, so that would be gaming downloading and streaming movies browsing the web and programming software. So far it has been running great but one thing annoys me a little bit. I frequently play Mount&Blade: Warband, it's a great game and you should check it out. Everything runs smoothly but only when I turn down the 'Texture Detail'. Otherwise it will lag a lot and I can't really play. Now my question is: Is this a problem of not enough RAM? At first I was really sure it was but after thinking about for a while I'm not anymore. My computer only has 4 Gigabytes of RAM and there is still a slot open. So will it improve when I buy another 8 Gigabytes? EDIT: It has an Nvidia GeForce GT 635M inside. and an Intel Core i5 3230M CPU with 2,6 GHz. Help and answers are really appreciated. Thanks to all.

    Read the article

  • Almost All Logical Volumes Disappeared - Recovery?

    - by Alex
    We had a hard disc crash of one of two hard discs in a software raid with a LVM on top. The server is running Citrix xenserver. On the hard disk which is still intact, the volume group gets detected well, but only one LV is left. (some hashes replaced by "x") # lvdisplay --- Logical volume --- LV Name /dev/VG_XenStorage-x-x-x-x-408b91acdcae/MGT VG Name VG_XenStorage-x-x-x-x-408b91acdcae LV UUID x-x-x-x-x-x-vQmZ6C LV Write Access read/write LV Status available # open 0 LV Size 4.00 MiB Current LE 1 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 root@rescue ~ # vgdisplay --- Volume group --- VG Name VG_XenStorage-x-x-x-x-408b91acdcae System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 698.62 GiB PE Size 4.00 MiB Total PE 178848 Alloc PE / Size 1 / 4.00 MiB Free PE / Size 178847 / 698.62 GiB VG UUID x-x-x-x-x-x-53w0kL I could understand if a full physical volume is lost - but why only the logical volumes? Is there any explanation for this? Is there any way to recover the logical volumes? EDIT We are here in a rescue system. The problem is that the whole server does not boot (GRUB error 22) What we are trying to do is to access the root filesystem. But everything was in the LVM. We have only this: (parted) print Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 750GB 750GB primary boot, lvm And this 750GB LVM volume is exactly what we see on top.

    Read the article

  • How do I setup a secondary incoming mail server?

    - by abrahamvegh
    I currently have a server running Debian 6, with postfix and dovecot handling email. This server hosts email for a number of domains and users, so I use MySQL as my backing store for users and forwardings and everything related. Currently, this server is the only server listed in an MX record for all of the domains it serves. I would like to create a secondary server that would be listed in the DNS with a lower priority (e.g. current primary server is priority 5, secondary would be priority 10), so that in the event that I need to reboot the primary server, or otherwise make it unavailable, the secondary server would receive email, and hold it until the primary server came back up, at which point it would deliver any held email to the primary server. I do not need the secondary server to function as a backup sending server. Users would never need to see the secondary server, they would simply not lose incoming emails if the primary server is down, and they would be unable to send or receive until the primary came back up. How would I go about doing this? I would like to use the same software if they can handle this task, because I’m already familiar with managing them.

    Read the article

  • Why is my new PC so slow at startup?

    - by rumtscho
    Bought a new PC this weekend, and it works really good. Only I have one big problem: startup time. Its BIOS needs 62 sec to load, then from Grub start to pw entering screen it's another 26 sec. I think this is a lot, because my old PC needs 34 sec for BIOS and another 8 sec to pw screen. After I enter the pw, the desktop is usable with practically no delay on both. The new PC is a core i7-930, running a Lucid Lynx 64 bit from a Intel Postville SSD (no internal HDs). The old PC is a Pentium 4 celeron (forgot the clock speed) running a Lucid Lynx 32 bit from an ATA 100 hard drive. Neither PC is overclocked. The new one has boot sequence 1.DVD ROM, 2.SSD (connected over SATA in AHCI mode), 3. removable drive. The old one boots from 1. DVD ROM, 2. HDD, 3. Floppy. Neither has a second OS installed. The new one has less software installed than the old one (I think), but the boot time difference was noticeable even before I made any installs. As far as I know, just the SSD should be enough to make a noticeable difference in boot time. I thought that having a good mainboard on the new PC as opposed to the basic office model on the old one would also mean a faster loading BIOS. If these assumptions are right, I guess I must have misconfigured something in the BIOS of the new PC. How should I configure it for a fast boot? It has an ASUS P6X58D board with an AMI BIOS, if you need the BIOS revision number I could post that too.

    Read the article

  • Low-profile, PCI Express, x1 video card with VGA-out?

    - by Dandy
    I just bought an Acer Aspire EasyStore H340 system (http://us.acer.com/acer/productv.do?LanguageISOCtxParam=en&kcond61e.c2att101=54825&sp=page16e&ctx2.c2att1=25&link=ln438e&CountryISOCtxParam=US&ctx1g.c2att92=450&ctx1.att21k=1&CRC=936243954) It comes with Windows Home Server, which I don't particularly care for (too dumbed down for my liking)--I bought the box mainly for the form factor, and intend to install Server 2008 on it and have it run as a small domain controller. The geniuses at Acer however went out of their way to ensure you can only run Home Server--you can only connect to it via the Home Server Connector software, as it has no video-out whatsoever (so essentially, there's no way to even get into the BIOS). It only has a low-profile, PCI Express x1 slot. It turns out to be way harder than I thought to locate a video card that both has an x1 connector, and is low-profile (I'd really rather not snip the bracket at the back just so it'll fit the case). I know they're out there, and I've seen one with Display Port outputs, but I don't have a monitor with this connection. So to reiterate, it needs to be: - x1 connector - low profile - VGA out (though DVI would be okay; I have some spare adapters) Can anyone recommend anything at all?

    Read the article

  • How can I take browser screenshots at a higher resolution than my browser supports?

    - by user53575
    I need to take a screenshot of a website as it would appear on a very high resolution monitor... say 16000x12800 pixels. My laptop's screen has a native resolution of 1280x800. Basically, I need to simulate having a monitor resolution much higher than my monitor and video card actually supports. I want the screenshot of the site to look pretty much how it does when you hit CTRL MINUS (zoom out) in Firefox repeatedly, but without any loss of pixels due to scaling. How can I do this? Is there some way to use virtual machine software to simulate a super-high-res display? If not, is there some way to open a browser window bigger than the screen, and then capture its contents as a PNG somehow? Anything else that might work? Here was an answer: http://superuser.com/questions/120266/how-can-i-take-browser-screenshots-at-a-higher-resolution-than-my-browser-support But it doesn't work. Firefox remains in the resolution of the physical screen. The window blinks and shrinks back to normal resolution. Please Help!!

    Read the article

  • Network card shuts down when stressed

    - by user142485
    I have a network card that functions fine with light use, but quits functioning after heavy use. I replaced it with a brand new one and still have the same issue, also updated drivers. It is a wired D-Link card. The Internet seems fine for a small amount of web browsing but when I run a bandwidth test it starts out fast and slows quickly until the card completely quits; I have a constant ping of the gateway going while I run this and it starts timing out after a couple seconds into the speed test. The card will stay on and the data light on it still flashes some but I cannot ping the gateway or anything else until the computer is rebooted. When I boot into safe mode I can browse and run the speed test fine with no problems. I am guessing that this is probably some program that is loading in regular mode but not safe mode that is causing the issue? I have very limited software (turned off av and firewall) on the computer but I am thinking that I'll just have to start eliminating start-up programs and see if that helps. This is on Windows 7 if that makes any difference. Anyone had a similar issue or have any other suggestions/ideas for narrowing down this problem?

    Read the article

  • How to Monitor Network in Medium-Sized Company?

    - by Kyle Lowry
    I work at a medium sized company (100+ employees). An issue that has been cropping up is network performance, internet access in particular. We have about 70 or more computers, a mix of Mac OS X and Windows XP & 7 machines. We have several servers (Exchange server, PC file servers, MS SQL, Blackberry, FTP, Mac server, etc). There are four main switches, a SonicWall firewall, and probably a couple routers in the server room with a dozen or so more scattered around the building. The network structure has grown organically over a number of years; and, as far as I know, there really isn't a monitoring solution in place. When we experience network issues (slow connections, dropped packets, and so on), our general solution is to power cycle some hardware or go around to each employee and ask them if they are uploading/downloading any large files. This is really inefficient and time consuming, and it does not allow us to monitor the network, tackling potential problems proactively. I would like to find a solution that would allow me to monitor network usage company-wide in real time, with detail going down to the individual computer, ideally. Given the hodgepodge of equipment and operating systems, what would be the best way to set up some kind of monitoring solution? Hardware, software, restructuring our network architecture?

    Read the article

< Previous Page | 718 719 720 721 722 723 724 725 726 727 728 729  | Next Page >