Search Results

Search found 111248 results on 4450 pages for 'end user computing'.

Page 725/4450 | < Previous Page | 721 722 723 724 725 726 727 728 729 730 731 732  | Next Page >

  • Asus P5Q doesn't post at all

    - by Sebi
    I had a very strange incident this evening. I was watching TV on the computer and suddenly the sound stutter. Some seconds later, the screen went black. First I thought ok some error, don't worry. Since the computer didn't react on any input from the mouse or keyboard, I shutted it down by pressing the power button. I tried to reboot but the monitor rest black. All the fans were running, the MB didn't made a beep and the leds are all green as they have to be. The HDD is running too, also the monitor is on. But nothing happens, not even a single message on the screen, just black. Here are the things I already tried with no success: tried to boot with 1 of two rams (each tested alone) turned off all power (pull th plug) for 10 minutes tested the graphic card with another pc. there it worked. tested the RAM with another pc. there it worked. Any hints what to do next?

    Read the article

  • How to allow local LAN access while connected to Cisco VPN?

    - by Ian Boyd
    How can I maintain local LAN access while connected to Cisco VPN? When connecting using Cisco VPN, the server has to ability to instruct the client to prevent local LAN access. Assuming this server-side option cannot be turned off, how can allow local LAN access while connected with a Cisco VPN client? I used to think it was simply a matter of routes being added that capture LAN traffic with a higher metric, for example: Network Destination Netmask Gateway Interface Metric 10.0.0.0 255.255.0.0 10.0.0.3 10.0.0.3 20 <--Local LAN 10.0.0.0 255.255.0.0 192.168.199.1 192.168.199.12 1 <--VPN Link And trying to delete the 10.0.x.x -> 192.168.199.12 route don't have any effect: >route delete 10.0.0.0 >route delete 10.0.0.0 mask 255.255.0.0 >route delete 10.0.0.0 mask 255.255.0.0 192.168.199.1 >route delete 10.0.0.0 mask 255.255.0.0 192.168.199.1 if 192.168.199.12 >route delete 10.0.0.0 mask 255.255.0.0 192.168.199.1 if 0x3 And while it still might simply be a routing issue, attempts to add or delete routes fail. At what level is Cisco VPN client driver doing what in the networking stack that takes overrides a local administrator's ability to administer their machine? The Cisco VPN client cannot be employing magic. It's still software running on my computer. What mechanism is it using to interfere with my machine's network? What happens when an IP/ICMP packet arrives on the network? Where in the networking stack is the packet getting eaten? See also No internet connection with Cisco VPN Cisco VPN Client interrupts connectivity to my LDAP server Cisco VPN stops Windows 7 Browsing How can I prohibit the creation of a route in Windows XP upon connection to Cisco VPN? Rerouting local LAN and Internet traffic when in VPN VPN Client "Allow local LAN Access" Allow Local LAN Access for VPN Clients on the VPN 3000 Concentrator Configuration Example LAN access gone when I connect to VPN Windows XP Documentation: Route Edit: Things I've not yet tried: >route delete 10.0.* Update: Since Cisco has abandoned their old client, in favor of AnyConnect (HTTP SSL based VPN), this question, unsolved, can be left as a relic of history. Going forward, we can try to solve the same problem with their new client.

    Read the article

  • ConEmu Solarized color scheme not displaying properly in vim

    - by Xam
    I'll like to use vim terminal in ConEmu with Solarized color scheme. After configuring ConEmu and vimrc, some of the text from the help file is unreadable as shown below. My vimrc: runtime bundle/vim-pathogen/autoload/pathogen.vim execute pathogen#infect() syntax on filetype plugin indent on let g:solarized_termtrans = 1 set background=dark colorscheme solarized set tabstop=4 shiftwidth=4 softtabstop=4 noexpandtab My ConEmu settings:

    Read the article

  • How to stop intermittent playback on airtunes (iTunes + Airport Express)?

    - by Alex B
    Is there a definitive answer for how to stop intermittent "skips" or pauses while playing music from iTunes to an airport express connected to my home stereo? When I read other forums I see a wealth of posts that say "I did XYZ and it's fixed" followed by "I tried XYZ and it didn't work." This does not appear to be signal strength related. The green light on the Airport Express does not turn to yellow/orange. Other wireless devices have no trouble connecting at the same or greater distances from the wireless router.

    Read the article

  • How do I install an HP home-use printer on Windows Home Server (Windows Server 2003)

    - by Rob Allen
    I have an HP DeskJet F4210 printer that I would like to share on my network via Windows Home Server. Unfortunately, the driver installation checks for supported OS's, detects Home Server as Windows Server 2003 and exits. The driver install supports WinXP, W2k, Vista, and Win98SE. In theory, drivers for XP or Windows 2000 should work fine with Home Server. When using the "Install Printer" tool in Home Server I am only able to select .inf files (there are serveral on the install media) but the driver folders for XP and 2000 have .sys and .dll files. How can I bypass HP's short-sighted install program and get this printer up and running on Home server? I'll be happy with basic print functionality and will save the task of enabling scanning for another time.

    Read the article

  • Linux Kernel Messages: ata1.00: status: { DRDY ERR }

    - by PM
    I am receiving a lot of these messages. Is my HD going to die tomorrow morning? ata1: link is slow to respond, please be patient (ready=0) ata1: device not ready (errno=-16), forcing hardreset ata1: soft resetting link ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1: clearing spurious IRQ ata1.00: configured for UDMA/33 ata1: EH complete ata1.00: qc timeout (cmd 0xa0) ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0 cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)

    Read the article

  • Automate ripping TV show DVDs

    - by skarface
    RipIt & Handbrake do a really good job of ripping and compressing. For normal "single main feature" DVDs I have a good workflow, and for the most part handbrake does a good job of figuring out what the main title is. The process for ripping a DVD that has multiple episodes of something kinda sucks. Has anyone made any progress on automating (or at least simplifying) the process of getting show-s01e01.avi from a DVD?

    Read the article

  • How can I connect any USB device to my computer wirelessly?

    - by daviesgeek
    I am trying to connect the Canon 550D wirelessly to my computer so that I can control it from at a distance. It can connect normally via a USB cable, so I was wondering if there was a way to plug a dongle into the computer, and a dongle into the camera so the two can connect. I'm basically looking for a really long USB cord that will work over long distances (200+ feet). Another important factor is that I really would prefer not having use a power cord, rather just plugging in a dongle, as it will make the setup more mobile. Does anything like this exist? (I know that Cables Unlimited had something like what I wanted, but they went out of business last year)

    Read the article

  • Sony Vaio: Bluetooth problem

    - by Mehper C. Palavuzlar
    I have a Vaio VPCCW21FX with Windows 7 Home Premium. I'm trying to reach the bluetooth settings but to no avail. I could neither switch the bluetooth on nor find the settings for it. I have tried the following: In Start menu, typed bluetooth, found "Bluetooth" in Programs, clicked on it, but there was no response. Checked task manager, there's nothing related bluetooth. Headed for Control Panel, opened Add Devices or Printers, right-clicked on Vaio computer, clicked on Bluetooth Settings, and no response again. What's wrong with my laptop? How can I fix this?

    Read the article

  • Static routing on a TP-Link TL-WR1043ND

    - by igor
    My home network setup looks like this: Both routers are TP-Link TL-WR1043ND routers. The basement router handles all devices in the house that are connected via cable, handing out addresses for the 10.89.49.0/24 network via DHCP. Wireless doesn’t really work from the basement, as the signal is too weak, so I have disabled it. To do WiFi, I have added a second (identical) router downstairs. On the WAN side it is assigned the 10.89.49.101 IP address from the basement router, and on its LAN it provides the 10.89.7.0/24 network. Basic internet access works flawlessly from any device this way. I am now facing the problem that I am not able to communicate (e.g. SSH) between all devices, wired or wireless. I am able to connect from a wireless device to a wired device, for example SSH-ing from 10.89.7.X to 10.89.49.Y, but it doesn’t work the other way round—despite the fact that I have added a static route to the basement router: Does anybody have any idea on how to solve it? Both routers have already been upgraded to use the most recent firmware from TP-Link.com (Build 110429), to no avail. Errata: I would like to stick with the official firmware, switching to something like DD-WRT or OpenWrt only as a last resort.

    Read the article

  • Windows Audio Issue

    - by Nikki
    This one is driving me nuts. Hoping someone can shed some light. I'm running windows 7 using onboard audio. It's been fine for over 2 years but lately there's a problem every time I play audio. I hear a small soft burst of static and the volume turns itself down from 50% to 23%. Once at 23%, it plays fine. No related events logged in viewer. No reported problems with the device. Different headphones, same problem. I played around with audio settings for hours but the problem persists. EDIT: ok more info: Motherboard: ECS G31T-M LGA775 System info displays this: Name High Definition Audio Device Manufacturer Microsoft Status OK PNP Device ID HDAUDIO\FUNC_01&VEN_1106&DEV_E721&SUBSYS_10192683&REV_1001\4&3D4E739&0&0001 Driver c:\windows\system32\drivers\hdaudio.sys (6.1.7600.16385, 297.00 KB (304,128 bytes), 14/07/2009 9:51 AM) I'll keep adding info as I find it. The question I want resolved is; Is it faulty hardware? If so, I can buy a sound card. I can't imagine software is responsible since I haven't installed anything new for weeks. Virus scans are clear as well. The static burst is irritating to say the least. Tried 2 different headphones and separate speakers. Same problem. I know it's not an easy problem but I was hoping someone had encountered the same thing.

    Read the article

  • Using a cell phone as a PC remote control

    - by Mahmoud Hossam
    I have a sony ericsson phone that can control any PC using bluetooth, as long as it has permission to do so, of course. It doesn't require any server software of any kind, it just works out of the box with any PC (or mac) that is bluetooth enabled. Is there any program I could use that has the same functionality? I don't want to install anything on the PC, I just want to be able to use the program installed on the phone. I prefer Java ME/Android/Symbian apps, I don't have an iPhone.

    Read the article

  • How to make Firefox use TCP for DNS

    - by miniBill
    I want to use TCP for DNS, to bypass my ISP's slow and broken DNS servers. I'm not using (and don't want to use) a proxy. Note: I want to use DNS over TCP because if I use it over udp, no matter what server I set, I get answers from my ISP's DNS. Notice that I will fiercely downvote whoever suggests: programs to do TCP over DNS, the setting in about:config to make DNS go over the proxy too: I'm not using a proxy, use another DNS: I've already set up Google as my DNS, but I get intercepted. Example of what I mean by saying intercept: $ dig @8.8.8.8 thepiratebay.se ; <<>> DiG 9.8.1 <<>> @8.8.8.8 thepiratebay.se ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 24385 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;thepiratebay.se. IN A ;; ANSWER SECTION: thepiratebay.se. 28800 IN A 83.224.65.41 ;; Query time: 50 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Sun Sep 16 22:51:06 2012 ;; MSG SIZE rcvd: 49 $ dig +tcp @8.8.8.8 thepiratebay.se ; <<>> DiG 9.8.1 <<>> +tcp @8.8.8.8 thepiratebay.se ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 15131 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;thepiratebay.se. IN A ;; ANSWER SECTION: thepiratebay.se. 436 IN A 194.71.107.15 ;; Query time: 61 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Sun Sep 16 22:51:10 2012 ;; MSG SIZE rcvd: 49 If it matters, I'm using Firefox 14 on Gentoo Linux.

    Read the article

  • IPv6 address is not working in Ubuntu

    - by Alex Farber
    Telnet connection with echo service succeeds for localhost and 127.0.0.1 host names, but fails with ::1 host name: alex@u120432:~$ telnet localhost 7 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 123 123 ^] telnet q Connection closed. alex@u120432:~$ telnet ::1 7 Trying ::1... telnet: Unable to connect to remote host: Connection refused alex@u120432:~$ My own program trying to talk using IPv6 address fails as well. Why IPv6 address is rejected? OS: Ubuntu 12.04 32 bit.

    Read the article

  • Invalid printer specified

    - by user1561124
    The error is that when a batch (about 15) of similar 1 page documents are sent to the printer from the server some of them (last time it was 5) fail with the message ‘Invalid printer specified’ and the others work fine. The same document sent 1 second later will work fine. We are using. Winodws 2008 R2 Std server (64 Bites) C# version 4 Crystal API version 13.2 Printer: HP LaserJet 600 M602 This is error message I'm getting. An error of type COMException occured with message " Invalid printer specified. GBPickList {FBC22A8B-E19A-438A-923A-F44EEDB861BD}.rpt". Target Site:Void ModifyPrinterName(System.String), stack: at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.ModifyPrinterName(String newVal) at CrystalDecisions.CrystalReports.Engine.PrintOptions.set_PrinterName(String value)

    Read the article

  • How do I run shell script "convert" in OSX Mavericks

    - by user267219
    I have been successfully converting jpgs to pdf in Mountain Lion with: do shell script "/System/Library/Printers/Libraries/./convert -f " & "\"" & _posix & "\"" & " -o " & "\"" & _newPosix & "\"" I recently moved to Mavericks and now get this error: -- error "sh: /System/Library/Printers/Libraries/./convert: No such file or directory" number 127 The error message is right - the directory does not exist under Mavericks. Can anyone suggest a replacement for this code?

    Read the article

  • Getting authentication token after a HttpSendRequest

    - by Jessica
    The following code will log in my application to a server. That server will return an authentication token if the login is successful. I need to use that token to query the server for information. egressMsg := pchar('email='+LabeledEdit1.text+'&&password='+MaskEdit1.Text+#0); egressMsg64 := pchar(Encode64(egressMsg)); Reserved := 0; // open connection hInternetConn := InternetOpen('MyApp', INTERNET_OPEN_TYPE_PRECONFIG, NIL, NIL, 0); if hInternetConn = NIL then begin ShowMessage('Error opening internet connection'); exit; end; // connect hHttpSession := InternetConnect(hInternetConn, 'myserver.com', INTERNET_DEFAULT_HTTP_PORT, '', '', INTERNET_SERVICE_HTTP, 0, 0); if hHttpSession = NIL then begin ShowMessage('Error connecting'); exit; end; // send request hHttpRequest := HttpOpenRequest(hHttpSession, 'POST', '/myapp/login', NIL, NIL, NIL, 0, 0); if hHttpRequest = NIL then begin ShowMessage('Error opening request'); exit; end; label2.caption := egressMsg64 + ' '+inttostr(length(egressMsg64)); res := HttpSendRequest(hHttpRequest, Nil, DWORD(-1), egressMsg64, length(egressMsg64)); if not res then begin ShowMessage('Error sending request ' + inttostr(GetLastError)); exit; end; BufferSize := Length(infoBuffer); res := HttpQueryInfo(hHttpRequest, HTTP_QUERY_STATUS_CODE, @infoBuffer, BufferSize, Reserved); if not res then begin ShowMessage('Error querrying request ' + inttostr(GetLastError)); exit; end; reply := infoBuffer; Memo1.Lines.Add(reply); if reply <> '200' then begin //error here end; // how to I get the token here!!!! InternetCloseHandle(hHttpRequest); InternetCloseHandle(hHttpSession); InternetCloseHandle(hInternetConn); How do I get that token? I tried querying the cookie, I tried InternetGetCookie() and a lot more. Code is appreciated Thanks jess EDIT I found that if you use InternetReadFile you can get that token. However that token comes out as an array of bytes. It's hard to use it later to send it to the server... anyone knows how to convert an array of bytes to pchar or string?

    Read the article

  • JPQL check many-to-many relationship

    - by Juriy
    Just a quick question: There's the entity (for example User) who is connected with the ManyToMany relationship to the same entity (for example this relation describes "friendship" and it is symmetric). What is the fastest way in terms of execution time to check if User A is a "friend" of user B? The "dumb" way would be to fetch whole List and then check if user exists there but that's obviously the overhead. I'm using JPA 2 Here's the sample code: @Entity @Table(name="users") public class UserEntity { @ManyToMany(fetch = FetchType.LAZY) private List<UserEntity> friends; .... }

    Read the article

  • How to invalidate a single data item in the .net cache in VB

    - by Craig
    I have the following .NET VB code to set and read objects in cache on a per user basis (i.e. a bit like session) '' Public Shared Sub CacheSet(ByVal Key As String, ByVal Value As Object) Dim userID As String = HttpContext.Current.User.Identity.Name HttpContext.Current.Cache(Key & "_" & userID) = Value End Sub Public Shared Function CacheGet(ByVal Key As Object) Dim returnData As Object = Nothing Dim userID As String = HttpContext.Current.User.Identity.Name returnData = HttpContext.Current.Cache(Key & "_" & userID) Return returnData End Function I use these functions to hold user data that I don't want to access the DB for all the time. However, when the data is updated, I want the cached item to be removed so it get created again. How do I make an Item I set disappear or set it to NOTHING or NULL? Craig

    Read the article

  • Connect a PC to MAC OSX Server

    - by Paul Sheldrake
    I'm trying to connect to a server at work which is run on a Mac but I have a PC (windows 7) at home. I have path to connect in the format of afp://server.com/files. Is there a client that I need to install on my PC that I can use to login? Thanks, Paul

    Read the article

  • Where is the script editor in google spreadsheet?

    - by René Nyffenegger
    Hello I just stumbled upon this link and wanted to try it out. Yet, if I open a google spreadsheet, I have no scripts submenu under the tools menu. This was with firefox 3.0.15 and IE 7. Unfortunately, I didn't find anything that indicated why there wouldn't be such menus with my spreadsheets. Does someone know more about this? Thanks / Rene

    Read the article

  • Error on clicking on Text to Speech tab in Speech properties in Control Panel

    - by iceman
    When I click on Text to Speech tab in Speech properties I receive error: "C:\WINDOWS\system32\shell32.dll,Control_RunDLL "C:\Program Files\Common Files\Microsoft Shared\Speech\sapi.cpl",Speech". There's a hotfix mentioned the the KBs in MS support.For that MS sent me a password protected file ; 170483_ENU_i386_zip.exe which contained two files : WindowsXP-KB838659-x86-ENU.EXE and WINDOWSXP-KB838659-X86-ENU-Symbols.EXE . The first one did not install as it said i already had it and the second one unpacked some dlls which i don't know how to use. I also tried Re-registering sapi.dll on Windows XP using C:\Windows\System32\regsvr32.exe Is there any other fix to this error?

    Read the article

  • Xerox phaser 7760 prints gray as pink.

    - by Leif
    I have a Xerox phaser 7760 and 60 iMacs that dual boot xp and osx 10.5. They print without problem to other printers, but if you print to the 7760 anything gray scale comes out with a pink tint. This happens from all 60 computers windows or mac boot from any application. I have reinstalled the driver and run the color balance on the printer. The printer does fine on internal prints of gray for diagnostic pages. Any ideas on how to solve this?

    Read the article

< Previous Page | 721 722 723 724 725 726 727 728 729 730 731 732  | Next Page >