Search Results

Search found 19856 results on 795 pages for 'inversion of control'.

Page 727/795 | < Previous Page | 723 724 725 726 727 728 729 730 731 732 733 734  | Next Page >

• Schizophrenic Ubuntu 12.10-12.04: Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to getit to work?

  - by zewone

  I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686  Any help much appreciated... Thanks, Philippe

  Read the article

• Hyper-V Live Migration across Sites!

  - by Ryan Roussel

  One of the great sessions I sat in on at Tech Ed this week was stretching a Windows 2008 R2 Hyper-V  Failover Cluster across sites.  With this ability, you could actually implement a Hyper-V cluster where you could migrate or even Live Migrate VMs across sites.   With this area’s propensity for Hurricanes, this will be a very popular topic for me over the next few months. While this technology is possible today, it’s also very complicated and can be very expensive to implement.    First your WAN connection has to support the ability to trunk your VLAN across both sites in order to Live Migrate.  This means you can’t use a Layer 3 routed connection like MPLS.  It has to be a Metro Ethernet connection or "Dark Fiber”.  Dark Fiber is unused Fiber already in the ground that can be leased from  various providers. Both of these connections would allow you to trunk layer 2 across your WAN.  Cisco does have the ability to trunk layer 2 across a routed connection by muxing the traffic but this is only available in their Nexus product line which has a very steep price tag.   If you are stuck with MPLS or the like and Nexus switching is not a realistic possibility, you will have to implement a multi-subnet cluster in which case Live Migration won’t be possible.  However you can still failover VMs to the remote site with some planning and manual intervention.  The consideration here is that the VMs will be on a different subnet once migrated, so you will have to change the IP addressing of your VMs.  This also has ramifications with DNS and Name resolution to control your down time.  DHCP with Reservations for your VMs is the preferred method to achieve the IP changes as this will automate that part of the process.   Secondly, you will have to have  a mechanism to replicate your storage across both sites.  Many SAN vendors natively support hardware based synchronous and asynchronous replication.  Some even support cluster shared volumes which were introduced in 2008 R2.   If your SANs do not support this natively, there are alternative file based replication products either software based like Double Take or hardware appliance like EMC.  Be sure to check with your vendor on the support of Disk majority if you’re replicating your quorum disk between SANs.   The last consideration is the ability to maintain quorum for your cluster.  If your replication provider does not support Disk Majority through replication, you will have to explore Node Majority with File Share Witness.  This will affect your design as a 3 node cluster with 1 node at the remote site and FSW at the production site would not have the ability to maintain quorum if the production site was lost. MS best practice for this would be to implement an even node cluster with 2 nodes at  each site and the FSW at a third site.   And there you have it.  While some considerations and research goes into implementing this solution, even a multi-subnet solution would be invaluable to organizations in the implementations of “warm” DR sites.

  Read the article

• How to undo a changeset using tf.exe rollback

  - by Tarun Arora

  Technorati Tags: Team Foundation Server 2010,Team Foundation Utilities,TFS2010   Oh no! Did you just check in a changeset in to TFS and realized that you need to roll back the changeset because the changes were suppose to go in a different branch? Or did you just accidently merge a wrong changeset in your release branch? There are several ways to undo the damage, Manual: Yes, we all just hate this word but for the record you could manually rollback the changes. Get Specific version on the branch and chose the changeset prior to the one you checked in. After that check out all the files in the changeset and check them in. During the check in you will receive a conflict. At this point choose ‘Keep local changes’ in the conflict resolution window and check in the files. Automated: Yes, we just love it! TFS comes with a very powerful command line utility ‘tf.exe’ that gives you the ability to rollback the effects of one or more changesets to one or more version-controlled items. This command does not remove the changesets from an item's version history. Instead, this command creates in your workspace a set of pending changes that negate the effects of the changesets that you specify. Syntax tf rollback /toversion:VersionSpec ItemSpec [/recursive] [/lock:none|checkin|checkout] [/version:versionspec] [/keepmergehistory] [/login:username,[password]] [/noprompt] tf rollback /changeset:ChangesetFrom~ChangesetTo [ItemSpec] [/recursive] [/lock:none|checkin|checkout] [/version:VersionSpec] [/keepmergehistory] [/noprompt] [/login:username,[password]]   I’ll explain this with an example. Your workspace is at the location C:\myWorkspace You want to rollback changeset # 145621 C:\Workspace\MyBranch>tf.exe rollback /changeset:145621 /recursive How do i rollback/undo a series of changesets? You can also rollback a range of changesets by using the following C:\Workspace\MyBranch>tf.exe rollback /changeset:145601~145621 /recursive This will check out the files in the version control and you should be able to see them in the pending changes. Go on check them in to undo the specific changeset that you just rolled back. Do you completely want to get rid of the changeset from all future merges between the two branches? /KeepMergeHistory: This option has an effect only if one or more of the changesets that you are rolling back include a branch or merge change. Specify this option if you want future merges between the same source and the same target to exclude the changes that you are rolling back. Errors “If you get the message ‘Unable to determine the workspace.’ You may be able to correct this by running ‘tf worksapces /collection:TeamProjectCollectionUrl’” you are in the wrong directory. Make sure that you run the ‘tf rollback’ command from the directory of your workspace.   Status Exit Code Description 0 The operation rolled back all items successfully. 1 The operation rolled back at least one item successfully but could not roll back one or more items. 100 The operation could not roll back any items.   To use the command you must have the Read, Check Out, and Check In permissions set to Allow. So, have you been in a rollback undo situation before?   Share this post :

  Read the article

• Handling "related" work within a single agile work item

  - by Tesserex

  I'm on a project team of 4 devs, myself included. We've been having a long discussion on how to handle extra work that comes up in the course of a single work item. This extra work is usually things that are slightly related to the task, but not always necessary to accomplish the goal of the item (that may be an opinion). Examples include but are not limited to: refactoring of the code changed by the work item refactoring code neighboring the code changed by the item re-architecting the larger code area around the ticket. For example if an item has you changing a single function, you realize the entire class now could be redone to better accommodate this change. improving the UI on a form you just modified When this extra work is small we don't mind. The problem is when this extra work causes a substantial extension of the item beyond the original feature point estimation. Sometimes a 5 point item will actually take 13 points of time. In one case we had a 13 point item that in retrospect could have been 80 points or more. There are two options going around in our discussion for how to handle this. We can accept the extra work in the same work item, and write it off as a mis-estimation. Arguments for this have included: We plan for "padding" at the end of the sprint to account for this sort of thing. Always leave the code in better shape than you found it. Don't check in half-assed work. If we leave refactoring for later, it's hard to schedule and may never get done. You are in the best mental "context" to handle this work now, since you're waist deep in the code already. Better to get it out of the way now and be more efficient than to lose that context when you come back later. We draw a line for the current work item, and say that the extra work goes into a separate ticket. Arguments include: Having a separate ticket allows for a new estimation, so we aren't lying to ourselves about how many points things really are, or having to admit that all of our estimations are terrible. The sprint "padding" is meant for unexpected technical challenges that are direct barriers to completing the ticket requirements. It is not intended for side items that are just "nice-to-haves". If you want to schedule refactoring, just put it at the top of the backlog. There is no way for us to properly account for this stuff in an estimation, since it seems somewhat arbitrary when it comes up. A code reviewer might say "those UI controls (which you actually didn't modify in this work item) are a bit confusing, can you fix that too?" which is like an hour, but they might say "Well if this control now inherits from the same base class as the others, why don't you move all of this (hundreds of lines of) code into the base and rewire all this stuff, the cascading changes, etc.?" And that takes a week. It "contaminates the crime scene" by adding unrelated work into the ticket, making our original feature point estimates meaningless. In some cases, the extra work postpones a check-in, causing blocking between devs. Some of us are now saying that we should decide some cut off, like if the additional stuff is less than 2 FP, it goes in the same ticket, if it's more, make it a new ticket. Since we're only a few months into using Agile, what's the opinion of all the more seasoned Agile veterans around here on how to handle this?

  Read the article

• Production Access Denied! Who caused this rule anyways?

  - by Matt Watson

  One of the biggest challenges for most developers is getting access to production servers. In smaller dev teams of less than about 5 people everyone usually has access. Then you hire developer #6, he messes something up in production... and now nobody has access. That is how it always starts in small dev teams. I think just about every rule of life there is gets created this way. One person messes it up for the rest of us. Rules are then put in place to try and prevent it from happening again.Breaking the rules is in our nature. In this example it is for good cause and a necessity to support our applications and troubleshoot problems as they arise. So how do developers typically break the rules? Some create their own method to collect log files off servers so they can see them. Expensive log management programs can collect log files, but log files alone are not enough. Centralizing where important errors are logged to is common. Some lucky developers are given production server access by the IT operations team out of necessity. Wait. That's not fair to all developers and knowingly breaks the company rule!  When customers complain or the system is down, the rules go out the window. Commonly lead developers get production access because they are ultimately responsible for supporting the application and may be the only person who knows how to fix it. The problem with only giving lead developers production access is it doesn't scale from a support standpoint. Those key employees become the go to people to help solve application problems, but they also become a bottleneck. They end up spending up to half of their time every day helping resolve application defects, performance problems, or whatever the fire of the day is. This actually the last thing you want your lead developers doing. They should be working on something more strategic like major enhancements to the product. Having production access can actually be a curse if you are the guy stuck hunting down log files all day. Application defects are good tasks for junior developers. They can usually handle figuring out simple application problems. But nothing is worse than being a junior developer who can't figure out those problems and the back log of them grows and grows. Some of them require production server access to verify a deployment was done correctly, verify config settings, view log files, or maybe just restart an application. Since the junior developers don't have access, they end up bugging the developers who do have access or they track down a system admin to help. It can take hours or days to see server information that would take seconds or minutes if they had access of their own. It is very frustrating to the developer trying to solve the problem, the system admin being forced to help, and most importantly your customers who are not happy about the situation. This process is terribly inefficient. Production database access is also important for solving application problems, but presents a lot of risk if developers are given access. They could see data they shouldn't.  They could write queries on accident to update data, delete data, or merely select every record from every table and bring your database to its knees. Since most of the application we create are data driven, it can be very difficult to track down application bugs without access to the production databases.Besides it being against the rule, why don't all developers have access? Most of the time it comes down to security, change of control, lack of training, and other valid reasons. Developers have been known to tinker with different settings to try and solve a problem and in the process forget what they changed and made the problem worse. So it is a double edge sword. Don't give them access and fixing bugs is more difficult, or give them access and risk having more bugs or major outages being created!Matt WatsonFounder, CEOStackifyAgile Support for Agile Developers

  Read the article

• Administer, manage, monitor, and fine tune the performance of your Oracle SOA Suite 11g Service Infrastructure and SOA composite applications.

  - by JuergenKress

  Key Features of the book If you are an Oracle SOA suite administrator, then this book is your bible. It gives you everything you need to know about all your tasks and help you to apply what you learn in your everyday life right from the first chapter. The book walks through promoting code across environments, performance tuning the service infrastructure, monitoring the environment, configuring security policies, managing the dehydration store, backing and restoring environments and so on. Packed with real-world examples from authors' own experiences, this books offers a unique insight into Oracle SOA Suite Administration. Detailed description The book begins with an introduction of SOA and quickly moves on to management of SOA composite applications. Readers will learn how to manage composite applications, their deployments and lifecycles. Equipped with this knowledge, readers will be introduced to monitoring and performance tuning SOA Suite, monitoring instances, messages, and composite applications, managing faults and exceptions, configuring audit levels of composite applications to include end-to-end monitoring through the use of extended logging as well as administering and configuring all SOA Suite components. A very important aspect of administration is tuning and optimizing the infrastructure for performance and book offers real work recommendations to monitor and performance tune service engines, the underlying WebLogic server, threads and timeouts, files systems, and composite applications. It also covers detailed administration of individual service components, configuring the infrastructure MBeans using both Oracle Enterprise Manager Fusion Middleware Control and WLST based scripts, migrating worklist preferences and BAM data across environments, setting up Email, LDAP and custom XPath. An administrator is always trusted with troubleshooting and root causing problems in the infrastructure and this book will help you through the troubleshooting approaches as how to identify faults and exception through extended logging and thread dumps and find solutions to common startup problems and deployment issues. The advanced contents of this book explains OWSM security framework and how to secure components deployed to the infrastructure along with the details of all groundwork needed to ready the environment. Last few chapters help you to understand and deal with managing the metadata services repository and dehydration store, backup and recovery and concluding with advanced topics such as silent/scripted installations, cloning, upgrading, patching and high availability installations. Packed with real-world examples, and tips straight from the trench; this book offers insights into SOA Suite administration that you will not find elsewhere. Part of our writing style in this book draws heavily on the philosophy of reuse and as such the book provide an ample of executable SQL queries and WLST scripts that administrators can reuse and extend to perform most of the administration tasks such as monitoring instances, processing times, instance states and perform automatic deployments, tuning, migration, and installation. These scripts are spread over each of the chapters in the book and can also be downloaded from here. The book is available in different formats at the following websites: Paperback and eBook versions & Kindle version. It is available for order and signed copies are available through our web site. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: SOA book,SOA Suite Adminsitration,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• Delivering SOA Governance with EAMS and Oracle Enterprise Repository by Link Consulting Team

  - by JuergenKress

  In the last 12 years Link Consulting has been making its presence in specific areas such as Governance and Architecture, both in terms of practices and methodologies, products, know-how and technological expertise. The Enterprise Architecture Management System - Oracle Enterprise Edition (EAMS - OER Edition) is the result of this experience and combines the architecture management solution with OER in order to deliver a product specialized for SOA Governance that gathers the better of two worlds in solution that enables SOA Governance projects, initiatives and programs. Enterprise Architecture Management System Enterprise Architecture Management System (EAMS), is an automation based solution that enables the efficient management of Enterprise Architectures. The solution uses configured enterprise repositories and takes advantages of its features to provide automation capabilities to the users. EAMS provides capabilities to create/customize/analyze repository data, architectural blueprints, reports and analytic charts. Oracle Enterprise Repository Oracle Enterprise Repository (OER) is one of the major and central elements of the Oracle SOA Governance solution. Oracle Enterprise Repository provides the tools to manage and govern the metadata for any type of software asset, from business processes and services to patterns, frameworks, applications, components, and models. OER maps the relationships and inter-dependencies that connect those assets to improve impact analysis, promote and optimize their reuse, and measure their impact on the bottom line. It provides the visibility, feedback, controls, and analytics to keep your SOA on track to deliver business value. The intense focus on automation helps to overcome barriers to SOA adoption and streamline governance throughout the lifecycle. Core capabilities of the OER include: Asset Management Asset Lifecycle Management Usage Tracking Service Discovery Version Management Dependency Analysis Portfolio Management EAMS - OER Edition The solution takes the advantages and features from both products and combines them in a symbiotic tool that enhances the quality of SOA Governance Initiatives and Programs. EAMS is able to produce a vast number of outputs by combining its analytical engine, SOA-specific configurations and the assets in OER and other related tools, catalogs and repositories. The configurations encompass not only the extendable parametrization of the metadata but also fully configurable blueprints, PowerPoint reports, charts and queries. The SOA blueprints The solution comes with a set of predefined architectural representations that help the organization better perceive their SOA landscape. More blueprints can be easily created in order to accommodate the organizations needs in terms of detail, audience and metadata. Charts & Dashboards The solution encompasses a set of predefined charts and dashboards that promote a more agile way to control and explore the assets. Time Based Visualization All representations are time bound, and with EAMS - OER you can truly govern SOA with a complete view of the Past, Present and Future; The solution delivers Gap Analysis, a project oriented approach while taking into consideration the As-Was, As-Is an To-Be. Time based visualization differentiating factors: Extensive automation and maintenance of architectural representations Organization wide solution. Easy access and navigation to and between all architectural artifacts and representations. Flexible meta-model, customization and extensibility capabilities. Lifecycle management and enforcement of the time dimension over all the repository content. Profile based customization. Comprehensive visibility Architectural alignment Friendly and striking user interfaces For more information on EAMS visit us here. For more information on SOA visit us here. SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: Link Consulting,OER,OSR,SOA Governance,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

  Read the article

• Development Quirk From ASP.NET Dynamic Compilation

  - by jkauffman

  The Problem I got a compilation error in my ASP.NET MVC3 project that tested my sanity today. (As always, names are changed to protect the innocent) The type or namespace name 'FishViewModel' does not exist in the namespace 'Company.Product.Application.Models' (are you missing an assembly reference?) Sure looks easy! There must be something in the project referring to a FishViewModel. The Confusing Part The first thing I noticed was the that error was occuring in a folder clearly not in my project and in files that I definitely had not created: %SystemRoot%\Microsoft.NET\Framework\(versionNumber)\Temporary ASP.NET Files\ App_Web_mezpfjae.1.cs I also ascertained these facts, each of which made me more confused than the last: Rebuild and Clean had no effect. No controllers in the project ever returned a ViewResult using FishViewModel. No views in the project defined that they use FishViewModel. Searching across all files included in the project for “FishViewModel” provided no results. The build server did not report a problem. The Solution The problem stemmed from a file that was not included in the project but still present on the file system: (By the way, if you don’t know this trick already, there is a toolbar button in the Solution Explorer window to “Show All Files” which allows you to see files all files in the file system) In my situation, I was working on the mission-critical Fish view before abandoning the feature. Instead of deleting the file, I excluded it from the project. However, this was a bad move. It caused the build failure, and in order to fix the error, this file must be deleted. By the way, this file was not in source control, so the build server did not have it. This explains why my build server did not report a problem for me. The Explanation So, what’s going on? This file isn’t even a part of the project, so why is it failing the build? This is a behavior of the ASP.NET Dynamic Compilation. This is the same process that occurs when deploying a webpage; ASP.NET compiles the web application’s code. When this occurs on a production server, it has to do so without the .csproj file (which isn’t usually deployed, if you’ve taken your time to do a deployment cleanly). This process has merely the file system available to identify what to compile. So, back in the world of developing the webpage in visual studio on my developer box, I run into the situation because the same process is occuring there. This is true even though I have more files on my machine than will actually get deployed. I can’t help but think that this error could be attributed back to the real culprit file (Fish.cshtml, rather than the temporary files) with some work, but at least the error had enough information in it to narrow it down. The Conclusion I had previously been accustomed to the idea that for c# projects, the .csproj file always “defines” the build behavior. This investigation has taught me that I’ll need to shift my thinking a bit to remember that the file system has the final say when it comes to web applications, even on the developer’s machine!

  Read the article

• SQL SERVER – Last Two Days to Get FREE Book – Joes 2 Pros Certification 70-433

  - by pinaldave

  Earlier this week we announced that we will be giving away FREE SQL Wait Stats book to everybody who will get SQL Server Joes 2 Pros Combo Kit. We had a fantastic response to the contest. We got an overwhelming response to the offer. We knew there would be a great response but we want to honestly say thank you to all of you for making it happen. Rick and I want to make sure that we express our special thanks to all of you who are reading our books. The offer is still on and there are two more days to avail this offer. We want to make sure that everybody who buys our most selling combo kits, we will send our other most popular SQL Wait Stats book. Please read all the details of the offer here. The books are great resources for anyone who wants to learn SQL Server from fundamentals and eventually go on the certification path of 70-433. Exam 70-433 contains following important subject and the book covers the subject of fundamental. If you are taking the exam or not taking the exam – this book is for every SQL Developer to learn the subject from fundamentals.  Create and alter tables. Create and alter views. Create and alter indexes. Create and modify constraints. Implement data types. Implement partitioning solutions. Create and alter stored procedures. Create and alter user-defined functions (UDFs). Create and alter DML triggers. Create and alter DDL triggers. Create and deploy CLR-based objects. Implement error handling. Manage transactions. Query data by using SELECT statements. Modify data by using INSERT, UPDATE, and DELETE statements. Return data by using the OUTPUT clause. Modify data by using MERGE statements. Implement aggregate queries. Combine datasets. INTERSECT, EXCEPT Implement subqueries. Implement CTE (common table expression) queries. Apply ranking functions. Control execution plans. Manage international considerations. Integrate Database Mail. Implement full-text search. Implement scripts by using Windows PowerShell and SQL Server Management Objects (SMOs). Implement Service Broker solutions. Track data changes. Data capture Retrieve relational data as XML. Transform XML data into relational data. Manage XML data. Capture execution plans. Collect output from the Database Engine Tuning Advisor. Collect information from system metadata. Availability of Book USA - Amazon | India - Flipkart | Indiaplaza Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Backup SQL Database Federation

  - by Herve Roggero

  One of the amazing features of Windows Azure SQL Database is the ability to create federations in order to scale your cloud databases. However until now, there were very few options available to backup federated databases. In this post I will show you how Enzo Cloud Backup can help you backup, and restore your federated database easily. You can restore federated databases in SQL Database, or even on SQL Server (as regular databases). Generally speaking, you will need to perform the following steps to backup and restore the federations of a SQL Database: Backup the federation root Backup the federation members Restore the federation root Restore the federation members These actions can be automated using: the built-in scheduler of Enzo Cloud Backup, the command-line utilities, or the .NET Cloud Backup API provided, giving you complete control on how you want to perform your backup and restore operations. Backing up federations Let’s look at the tool to backup federations. You can explore your existing federations by using the Enzo Cloud Backup application as shown below. As you can see, the federation root and the various federations available are shown in separate tabs for convenience. You would first need to backup the federation root (unless you intend to restore the federation member on a local SQL Server database and you don’t need what’s in the federation root). The steps are similar than those to backup a federation member, so let’s proceed to backing up a federation member. You can click on a specific federation member to view the database details by clicking at the tab that contains your federation member. You can see the size currently consumed and a summary of its content at the bottom of the screen. If you right-click on a specific range, you can choose to backup the federation member. This brings up a window with the details of the federation member already filled out for you, including the value of the member that is used to select the federation member. Notice that the list of Federations includes “Federation Root”, which is what you need to select to backup the federation root (you can also do that directly from the root database tab).  Once you provide at least one backup destination, you can begin the backup operation.  From this window, you can also schedule this operation as a job and perform this operation entirely in the cloud. You can also “filter” the connection, so that only the specific member value is backed up (this will backup all the global tables, and only the records for which the distribution value is the one specified). You can repeat this operation for every federation member in your federation. Restoring Federations Once backed up, you can restore your federations easily. Select the backup device using the tool, then select Restore. The following window will appear. From here you can create a new root database. You can also view the backup properties, showing you exactly which federations will be created. Under the Federations tab, you can select how the federations will be created. I chose to recreate the federations and let the tool perform all the SPLIT operations necessary to recreate the same number of federation members. Other options include to create the first federation member only, or not to create the federation members at all. Once the root database has been restored and the federation members have been created, you can restore the federation members you previously backed up. The screen below shows you how to restore a backup of a federation member into a specific federation member (the details of the federation member are provided to make it easier to identify). Conclusion This post gave you an overview on how to backup and restore federation roots and federation members. The backup operations can be setup once, then scheduled daily.

  Read the article

• Learn Many Languages

  - by Phil Factor

  Around twenty-five years ago, I was trying to solve the problem of recruiting suitable developers for a large business. I visited the local University (it was a Technical College then). My mission was to remind them that we were a large, local employer of technical people and to suggest that, as they were in the business of educating young people for a career in IT, we should work together. I anticipated a harmonious chat where we could suggest to them the idea of mentioning our name to some of their graduates. It didn’t go well. The academic staff displayed a degree of revulsion towards the whole topic of IT in the world of commerce that surprised me; tweed met charcoal-grey, trainers met black shoes. However, their antipathy to commerce was something we could have worked around, since few of their graduates were destined for a career as university lecturers. They asked me what sort of language skills we needed. I tried ducking the invidious task of naming computer languages, since I wanted recruits who were quick to adapt and learn, with a broad understanding of IT, including development methodologies, technologies, and data. However, they pressed the point and I ended up saying that we needed good working knowledge of C and BASIC, though FORTRAN and COBOL were, at the time, still useful. There was a ghastly silence. It was as if I’d recommended the beliefs and practices of the Bogomils of Bulgaria to a gathering of Cardinals. They stared at me severely, like owls, until the head of department broke the silence, informing me in clipped tones that they taught only Modula 2. Now, I wouldn’t blame you if at this point you hurriedly had to look up ‘Modula 2′ on Wikipedia. Based largely on Pascal, it was a specialist language for embedded systems, but I’ve never ever come across it in a commercial business application. Nevertheless, it was an excellent teaching language since it taught modules, scope control, multiprogramming and the advantages of encapsulating a set of related subprograms and data structures. As long as the course also taught how to transfer these skills to other, more useful languages, it was not necessarily a problem. I said as much, but they gleefully retorted that the biggest local employer, a defense contractor specializing in Radar and military technology, used nothing but Modula 2. “Why teach any other programming language when they will be using Modula 2 for all their working lives?” said a complacent lecturer. On hearing this, I made my excuses and left. There could be no meeting of minds. They were providing training in a specific computer language, not an education in IT. Twenty years later, I once more worked nearby and regularly passed the long-deserted ‘brownfield’ site of the erstwhile largest local employer; the end of the cold war had led to lean times for defense contractors. A digger was about to clear the rubble of the long demolished factory along with the accompanying growth of buddleia and thistles, in order to lay the infrastructure for ‘affordable housing’. Modula 2 was a distant memory. Either those employees had short working lives or they’d retrained in other languages. The University, by contrast, was thriving, but I wondered if their erstwhile graduates had ever cursed the narrow specialization of their training in IT, as they struggled with the unexpected variety of their subsequent careers.

  Read the article

• Cloud hosted CI for .NET projects

  - by Scott Dorman

  Originally posted on: http://geekswithblogs.net/sdorman/archive/2014/06/02/cloud-hosted-ci-for-.net-projects.aspxContinuous integration (CI) is important. If you don’t have it set up…you should. There are a lot of different options available for hosting your own CI server, but they all require you to maintain your own infrastructure. If you’re a business, that generally isn’t a problem. However, if you have some open source projects hosted, for example on GitHub, there haven’t really been any options. That has changed with the latest release of AppVeyor, which bills itself as “Continuous integration for busy developers.” What’s different about AppVeyor is that it’s a hosted solution. Why is that important? By being a hosted solution, it means that I don’t have to maintain my own infrastructure for a build server. How does that help if you’re hosting an open source project? AppVeyor has a really competitive pricing plan. For an unlimited amount of public repositories, it’s free. That gives you a cloud hosted CI system for all of your GitHub projects for the cost of some time to set them up, which actually isn’t hard to do at all. I have several open source projects (hosted at https://github.com/scottdorman), so I signed up using my GitHub credentials. AppVeyor fully supported my two-factor authentication with GitHub, so I never once had to enter my password for GitHub into AppVeyor. Once it was done, I authorized GitHub and it instantly found all of the repositories I have (both the ones I created and the ones I cloned from elsewhere). You can even add “build badges” to your markdown files in GitHub, so anyone who visits your project can see the status of the lasted build. Out of the box, you can simply select a repository, add the build project, click New Build and wait for the build to complete. You now have a complete CI server running for your project. The best part of this, besides the fact that it “just worked” with almost zero configuration is that you can configure it through a web-based interface which is very streamlined, clean and easy to use or you can use a appveyor.yml file. This means that you can define your CI build process (including any scripts that might need to be run, etc.) in a standard file format (the YAML format) and store it in your repository. The benefits to that are huge. The file becomes a versioned artifact in your source control system, so it can be branched, merged, and is completely transparent to anyone working on the project. By the way, AppVeyor isn’t limited to just GitHub. It currently supports GitHub, BitBucket, Visual Studio Online, and Kiln. I did have a few issues getting one of my projects to build, but the same day I posted the problem to the support forum a fix was deployed, and I had a functioning CI build about 5 minutes after that. Since then, I’ve provided some additional feature requests and had a few other questions, all of which have seen responses within a 24-hour period. I have to say that it’s easily been one of the best customer support experiences I’ve seen in a long time. AppVeyor is still young, so it doesn’t yet have full feature parity with some of the older (more established) CI systems available,  but it’s getting better all the time and I have no doubt that it will quickly catch up to those other CI systems and then pass them. The bottom line, if you’re looking for a good cloud-hosted CI system for your .NET-based projects, look at AppVeyor.

  Read the article

• UPOS RFIDScanner data format

  - by Robert Snyder

  A lot of work that I do currently is based in the OPOS/UPOS world. My company has a device that can read 13.56Mhz tags (RFID), Smart Cards, and Mag Stripe cards. Up until somewhat recently I have only been working with RFID for a very specific scenario. That was to read UltraLight C and Desfire cards. These cards were all setup very specifically so that I could take the data read from those cards and force it into a MSR track2 format. The past couple of weeks, however, I have been working on reading RFID credit cards (since I have a Visa card I've been using mine), and Smart Card credit cards. (The visa card I have has both) In learning how to communicate with SmartCard and reading ISO7816 and EMVCO documents I became a little more familiar with how info is stored. But now I have a question regarding UPOS. The RFID data on my Visa is stored (and read) very similar to how the data is stored and read from the Smart Card on my Visa. Cool. Well in the UPOS spec for SmartCardRW the ReadData method returns a byte array. That's cool, I can just return all that data and then parse it as my heart desires. The RFID though has a LinkedList of Tags. Well this makes sense in terms of my Visa card (reminds me of a question I have in regards to SmartCard, but that is for another question) but what about ULC and Desfire, or for that matter any Mifare card. Pages, Files, Purses don't exactly fit the Tag profile. For instance lets just say I read pages 4-12 on my ULC card. Each page I read is 4 bytes long. Does this mean I have 9 tags in my LinkedList? Is my Tag id the page number? Or then how does that translate to Desfire? I open application 123456 and read file 1 and file 2, Do I have 2 tags? and if so what is my tag id? At least with my Visa I think that I have to use the Tag id (ex 5F24 for my expiration date) and value of {0x15, 0x10, 0x31} Part of me says yes..that makes sense. Another part of me says, "well if that is the case then why doesn't SmartCardRW have Tags?" So that is my question. How do I format my data from those different types of media? or is that the job of my Control Object (the application)? Is so how does it know? The only protocols I have are: // Summary: // Enumerates the available predefined RFID tag protocols the device supports. [Flags] public enum RFIDProtocols { EpcClass0 = 1, RFIDSdt0Plus = 2, EpcClass1 = 4, EpcClass1Gen2 = 8, EpcClass2 = 16, Iso14443A = 4096, Iso14443B = 8192, Iso15693 = 12288, Iso180006B = 16384, Other = 16777216, All = 1073741824, } If I use that well all of my cards that I have are all Iso14443A. I use the ATQA and the SAK to know what type of card I really have. There is no RFID property that lets me specify that. So I'm lost.

  Read the article

• Personalize your Experience with the Oracle Partner Store

  - by Kristin Rose

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} "Any sufficiently advanced technology is indistinguishable from magic." - Arthur C. Clarke So it may not be magic, but it’s definitely close!  Partners can now personalize their experience with the Oracle Partner Store and control what and who receives notifications. Let’s take a look at the MyOPS tab in Partner Store and explore more: Under “My Account” select Personal Information.  In the additional Email Addresses box, you can add in email addresses, including distribution lists that you want to be copied for every OPS notification that you receive. If you select Preferences in the drop-down you set the following options: What language you want to receive alerts in Whether or not you want to receive order confirmation and order booked alerts Your default installation country and currency Your default support offering and duration when you add items to the cart Other preferences you can select from the drop down include: Bill to Addresses Ship to Addresses Preferred Bill to/ Ship to Company information Credit Cards Please note that these settings will only affect your account in the Oracle Partner Store – they will not affect other users from your company.  For more information please refer to our training page. So take a moment to set up the Partner Store to meet your needs and save you some time. Abracadabra, Simon Davis Senior Director WW A&C Quote To Order Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Implementing Service Level Agreements in Enterprise Manager 12c for Oracle Packaged Applications

  - by Anand Akela

  Contributed by Eunjoo Lee, Product Manager, Oracle Enterprise Manager. Service Level Management, or SLM, is a key tool in the proactive management of any Oracle Packaged Application (e.g., E-Business Suite, Siebel, PeopleSoft, JD Edwards E1, Fusion Apps, etc.). The benefits of SLM are that administrators can utilize representative Application transactions, which are constantly and automatically running behind the scenes, to verify that all of the key application and technology components of an Application are available and performing to expectations. A single transaction can verify the availability and performance of the underlying Application Tech Stack in a much more efficient manner than by monitoring the same underlying targets individually. In this article, we’ll be demonstrating SLM using Siebel Applications, but the same tools and processes apply to any of the Package Applications mentioned above. In this demonstration, we will log into the Siebel Application, navigate to the Contacts View, update a contact phone record, and then log-out. This transaction exposes availability and performance metrics of multiple Siebel Servers, multiple Components and Component Groups, and the Siebel Database - in a single unified manner. We can then monitor and manage these transactions like any other target in EM 12c, including placing pro-active alerts on them if the transaction is either unavailable or is not performing to required levels. The first step in the SLM process is recording the Siebel transaction. The following screenwatch demonstrates how to record Siebel transaction using an EM tool called “OpenScript”. A completed recording is called a “Synthetic Transaction”. The second step in the SLM process is uploading the Synthetic Transaction into EM 12c, and creating Generic Service Tests. We can create a Generic Service Test to execute our synthetic transactions at regular intervals to evaluate the performance of various business flows. As these transactions are running periodically, it is possible to monitor the performance of the Siebel Application by evaluating the performance of the synthetic transactions. The process of creating a Generic Service Test is detailed in the next screenwatch. EM 12c provides a guided workflow for all of the key creation steps, including configuring the Service Test, uploading of the Synthetic Test, determining the frequency of the Service Test, establishing beacons, and selecting performance and usage metrics, just to name a few. The third and final step in the SLM process is the creation of Service Level Agreements (SLA). Service Level Agreements allow Administrators to utilize the previously created Service Tests to specify expected service levels for Application availability, performance, and usage. SLAs can be created for different time periods and for different Service Tests. This last screenwatch demonstrates the process of creating an SLA, as well as highlights the Dashboards and Reports that Administrators can use to monitor Service Test results. Hopefully, this article provides you with a good start point for creating Service Level Agreements for your E-Business Suite, Siebel, PeopleSoft, JD Edwards E1, or Fusion Applications. Enterprise Manager Cloud Control 12c, with the Application Management Suites, represents a quick and easy way to implement Service Level Management capabilities at customer sites. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Google+ |  Newsletter

  Read the article

• Using Solaris zfs + iscsi targets with Oracle VM

  - by wim.coekaerts

  I was playing with my Oracle VM setup and needed some shared storage that was block based. I did not have a storage array available but I did have a solaris box, that I use for Oracle VDI, available. I set up a few iscsi targets on this solaris server and exported them to my 2 Oracle VM servers. Here's how I did this : (1) On the solaris side : # zpool list NAME SIZE USED AVAIL CAP HEALTH ALTROOT rpool 544G 129G 415G 23% ONLINE - I just have a simple zpool, called rpool, on this box. It has plenty of space available for my needs. So I will use rpool and I will create 5 50gb vols : zfs create -V 50G rpool/ovm1 zfs create -V 50G rpool/ovm2 zfs create -V 50G rpool/ovm3 zfs create -V 50G rpool/ovm4 zfs create -V 50G rpool/ovm5 I want to use these volumes for iscsi so I have to enable them as shared iscsi devices : zfs set shareiscsi=on rpool/ovm1 zfs set shareiscsi=on rpool/ovm2 zfs set shareiscsi=on rpool/ovm3 zfs set shareiscsi=on rpool/ovm4 zfs set shareiscsi=on rpool/ovm5 The command iscsitadm list target should list these devices so make sure they show up. # iscsitadm list target Target: rpool/ovm1 iSCSI Name: iqn.1986-03.com.sun:02:896c766c-0943-4da5-d47e-9575b5a0be36 Connections: 2 Target: rpool/ovm2 iSCSI Name: iqn.1986-03.com.sun:02:a3116b46-73e0-e8c2-e80c-9a4f71aff069 Connections: 2 Target: rpool/ovm3 iSCSI Name: iqn.1986-03.com.sun:02:a838c400-2730-c0d6-f2c2-ee186a0261c1 Connections: 2 Target: rpool/ovm4 iSCSI Name: iqn.1986-03.com.sun:02:2e046afb-d66d-4f3f-c5de-8115e0ddd931 Connections: 2 Target: rpool/ovm5 iSCSI Name: iqn.1986-03.com.sun:02:66109fbe-81ac-ef05-f85e-ab8c1f34cb43 Connections: 2 At this point I want to make sure that I have some access control on these devices. To make it easier, I will create an alias for my 2 servers and use the alias for the ACL. get the iqn from the 2 servers on my 2 ovm servers (wcoekaer-srv1, wcoekaer-srv2) get the content of /etc/iscsi/initiatorname.iscsi (for each server) InitiatorName=iqn.1986-03.com.sun:01:2a7526f0ffff On the solaris side create the aliases : iscsitadm create initiator -n iqn.1986-03.com.sun:01:2a7526f0ffff wcoekaer-srv1 iscsitadm create initiator -n iqn.1986-03.com.sun:01:e31b08110f1 wcoekaer-srv5 Add the ACL to the targets : iscsitadm modify target -l wcoekaer-srv1 rpool/ovm1 iscsitadm modify target -l wcoekaer-srv1 rpool/ovm2 iscsitadm modify target -l wcoekaer-srv1 rpool/ovm3 iscsitadm modify target -l wcoekaer-srv1 rpool/ovm4 iscsitadm modify target -l wcoekaer-srv1 rpool/ovm5 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm1 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm2 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm3 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm4 iscsitadm modify target -l wcoekaer-srv5 rpool/ovm5 (2) the Oracle VM side On each server just do 2 simple things : # iscsiadm -m discovery -t sendtargets -p ca-vdi1 where ca-vdi1 is my solaris server name # service iscsi restart When I do cat /proc/partitions on my servers I will see the devices show up # cat /proc/partitions major minor #blocks name 8 0 160836480 sda 8 1 104391 sda1 8 2 3148740 sda2 8 3 1052257 sda3 253 0 6377804 dm-0 253 1 6377804 dm-1 253 2 6377804 dm-2 8 16 52428800 sdb 8 32 52428800 sdc 8 48 52428800 sdd 8 80 52428800 sdf 8 64 52428800 sde These 5 new devices sd[b..f] are shared storage for Oracle VM and can be used to pass through to the VM's as phy: devices or put ocfs2 on it and use as shared filesystem storage for dom0 repositories. I am setting up an 11gR2 rac template (the cool stuff Saar did) so I am using my devices to create a 2 node RAC cluster with phy: devices.

  Read the article

• Process Power to the People that Create Engagement

  - by Michael Snow

  Organizations often speak about their engagement problems as if the problem is the people they are trying to engage - employees,  partners, customers and citizens.  The reality of most engagement problems is that the processes put in place to engage are impersonal, inflexible, unintuitive, and often completely ignorant of the population they are trying to serve. Life, Liberty and the Pursuit of Delight? How appropriate during this short week of the US Independence Day Holiday that we're focusing on People, Process and Engagement. As we celebrate this holiday in the US and the historic independence we gained (sorry Brits!) - it's interesting to think back to 1776 to the creation of that pivotal document, the Declaration of Independence. What tremendous pressure to create an engaging document and founding experience they must have felt. "On June 11, 1776, in anticipation of the impending vote for independence from Great Britain, the Continental Congress appointed five men — Thomas Jefferson, John Adams, Benjamin Franklin, Roger Sherman, and Robert Livingston — to write a declaration that would make clear to people everywhere why this break from Great Britain was both necessary and inevitable. The committee then appointed Jefferson to draft a statement. Jefferson produced a "fair copy" of his draft declaration, which became the basic text of his "original Rough draught." The text was first submitted to Adams, then Franklin, and finally to the other two members of the committee. Before the committee submitted the declaration to Congress on June 28, they made forty-seven emendations to the document. During the ensuing congressional debates of July 1-4, 1776, Congress adopted thirty-nine further revisions to the committee draft. (http://www.constitution.org) If anything was an attempt for engaging the hearts and minds of the 13 Colonies at the time, this document certainly succeeded in its mission. ...Their tools at the time were pen and ink and parchment. Although the final document would later be typeset with lead type for a printing press to distribute to the colonies, all of the original drafts were hand written. And today's enterprise complains about using "Review and Track Changes" at times.  Can you imagine the manual revision control process? or lack thereof?  Collaborative process? Time delays? Would  implementing a better process have helped our founding fathers collaborate better? Declaration of Independence rough draft below. One of many during the creation process. Great comparison across multiple versions of the document here. (from http://www.ushistory.org/): While you may not be creating a new independent nation, getting your employees to engage is crucial to your success as a company in today's world. Oracle WebCenter provides the tools that power engagement. Employees that have better tools for communication, collaboration and getting their job done are more engaged employees. Better engaged employees create more engaged customers and partners. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";}

  Read the article

• Take Snapshots of Your Favorite Movie Scenes in VLC

  - by DigitalGeekery

  Have you ever wanted to grab a screenshot of your favorite TV or movie scene? Today we’ll show you how to do so with VLC Media Player. If you don’t have it already, download and install the latest version of VLC (link below). Start playing your movie, and to grab a snapshot, select Video from the menu and click Snapshot.   When you take a snapshot, by default a preview is displayed at the top left and the folder where the file is saved is briefly displayed on the screen. If you enable the Advanced Controls, you can take a snapshot with a click of a button, and advance the video frame by frame to get a more accurate shot. To enable the Advanced Controls, select View and Advanced Controls.   You’ll see the Advanced Controls buttons appear below the slider. Now just click on the Snapshot button to grab an image.   You can more easily control the frame you wish to grab by pressing the Frame by Frame button. You can pause the movie when it is near the perfect spot for your snapshot, and then press the Frame by Frame button to advance a single frame at a time. By default, the snapshots are saved as PNG files in your My Pictures folder in Windows. You can change those setting in the Preferences. First, you’ll need to select All under Show settings at the bottom. Then click on Video on the left. Scroll down a bit and you’ll see the Snapshot section. Here you can change the format from PNG to JPG, change the directory to which the snapshots are stored, turn on and off the preview, and change the filename prefix. Click Save when finished.   Now you have nice screenshots of your favorite movie to display as you wish…such as a Desktop Background!   VLC is an excellent media player that runs on Windows, Mac, and Linux. In addition to playing almost any media file, it also makes grabbing screenshots of your videos a breeze. Want to know more about VLC? Check out some of our previous articles like how to rip DVDs and how to set a video as your desktop wallpaper. Download the Latest version of VLC Similar Articles Productive Geek Tips Desktop Fun: Rural Scenes WallpapersAutomatically Mount and View ISO files in Windows 7 Media CenterHow to Make/Edit a movie with Windows Movie Maker in Windows VistaAdd Images and Metadata to Windows 7 Media Center Movie LibraryQuickly Find Movies to Watch at Hello Movies TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 tinysong gives a shortened URL for you to post on Twitter (or anywhere) 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes

  Read the article

• Where Have All the Ugly Forms Gone? Users and ADF Took Care Of It

  - by ultan o'broin

  Sometimes I hear that our application demos are a bit too "cutsey" and that we never talk about with any user roles that have lots of data entry as a requirement. Some (no names) consider those old clunker forms, with the myriad rows of fields, to be super-productive for data clerks. We do have such roles covered in Oracle Fusion Applications for sure. But consider what is really the issue here: productivity. Check out how the Oracle Fusion Financials Applications User Experience team went about designing for productivity when receiving and entering invoice data, for example. See how Fusion Financials caters so well for input and control of data? Central to all this is knowing the users and how they work: what tasks do they need to perform, and when. Read more about Fusion Financials productivity in the white paper, Get It Done Fast, Get It Done Right: The Oracle Fusion Financials User Experience. Now and then, I see forms that weren't designed for end user activity at all. Instead, they were designed by developers or by the IT department around the database schema. Forms with literally dozens of fields on the same page, sometimes. Forms that give the impression there was only task involved, when there may have been several. At times, completing one of these huge forms accurately became so tedious that, under pressure, it made more sense for the user to complete it quickly as possible and then let somebody else check it for accuracy and fill in the gaps from data emailed along in spreadsheet form. Data accuracy is critical in our business. Not good. Not efficient. Not productive. So here are a few basics on forms design for data entry-type user roles. A great place for developers to start exploring what is possible with forms layout is the Rich Client User Experience (RCUX) guidance on Form Layout, using ADF components. User-Centered Forms Design Considerations The starting point--something you must always keep in mind with your own design--is design for the end user. Find a representative end user, and keep that user engaged throughout the design, deployment, and test process. Consider these points in user testing those forms: Are there automated or technical solutions to entering the data that avoid manual input in the first place? For example, imports, uploads, OCR, whatever. Some day we will be able to tell Siri to do it, but leave that for now. Design your form to reflect the task involved (i.e., the business process) and not the database schema. On the form, group like fields together, logically. Eliminate duplicate data entry or prepopulate from previous data entry. Allow users to complete fields in the order they wish (i.e., no interdependency). Allow for tabbing between fields (keyboard is faster than mouse), so know how the browser supports this (see that RCUX guideline). Allow for final validation at the page level not at field-level entry. Way better for heads-down users. For example, ADF messages allow you to see a list of all validation errors on a page on a final submit or navigation action and to easily navigate to the point of error. Better still, be error tolerant. Allow users to enter data in formats they comfortable with. Bind any relevant user preference setting to the input format allowed (for example, the locale date format). Explore what data entry conversion can do for you automatically too (see the ADF converter demos, convenience patterns can also be written). Only ask for data input when it's needed. Get rid of, or hide optional fields. Cut down on the number of mandatory fields, and mark them clearly (use a *). Clearly label the fields in plain language. I am sure you may have a few more tips on forms design for data entry users. Remember the user before finding the comments.

  Read the article

• An Actionable Common Approach to Federal Enterprise Architecture

  - by TedMcLaughlan

  The recent “Common Approach to Federal Enterprise Architecture” (US Executive Office of the President, May 2 2012) is extremely timely and well-organized guidance for the Federal IT investment and deployment community, as useful for Federal Departments and Agencies as it is for their stakeholders and integration partners. The guidance not only helps IT Program Planners and Managers, but also informs and prepares constituents who may be the beneficiaries or otherwise impacted by the investment. The FEA Common Approach extends from and builds on the rapidly-maturing Federal Enterprise Architecture Framework (FEAF) and its associated artifacts and standards, already included to a large degree in the annual Federal Portfolio and Investment Management processes – for example the OMB’s Exhibit 300 (i.e. Business Case justification for IT investments).A very interesting element of this Approach includes the very necessary guidance for actually using an Enterprise Architecture (EA) and/or its collateral – good guidance for any organization charged with maintaining a broad portfolio of IT investments. The associated FEA Reference Models (i.e. the BRM, DRM, TRM, etc.) are very helpful frameworks for organizing, understanding, communicating and standardizing across agencies with respect to vocabularies, architecture patterns and technology standards. Determining when, how and to what level of detail to include these reference models in the typically long-running Federal IT acquisition cycles wasn’t always clear, however, particularly during the first interactions of a Program’s technical and functional leadership with the Mission owners and investment planners. This typically occurs as an agency begins the process of describing its strategy and business case for allocation of new Federal funding, reacting to things like new legislation or policy, real or anticipated mission challenges, or straightforward ROI opportunities (for example the introduction of new technologies that deliver significant cost-savings).The early artifacts (i.e. Resource Allocation Plans, Acquisition Plans, Exhibit 300’s or other Business Case materials, etc.) of the intersection between Mission owners, IT and Program Managers are far easier to understand and discuss, when the overlay of an evolved, actionable Enterprise Architecture (such as the FEA) is applied.  “Actionable” is the key word – too many Public Service entity EA’s (including the FEA) have for too long been used simply as a very highly-abstracted standards reference, duly maintained and nominally-enforced by an Enterprise or System Architect’s office. Refreshing elements of this recent FEA Common Approach include one of the first Federally-documented acknowledgements of the “Solution Architect” (the “Problem-Solving” role). This role collaborates with the Enterprise, System and Business Architecture communities primarily on completing actual “EA Roadmap” documents. These are roadmaps grounded in real cost, technical and functional details that are fully aligned with both contextual expectations (for example the new “Digital Government Strategy” and its required roadmap deliverables - and the rapidly increasing complexities of today’s more portable and transparent IT solutions.  We also expect some very critical synergies to develop in early IT investment cycles between this new breed of “Federal Enterprise Solution Architect” and the first waves of the newly-formal “Federal IT Program Manager” roles operating under more standardized “critical competency” expectations (including EA), likely already to be seriously influencing the quality annual CPIC (Capital Planning and Investment Control) processes.  Our Oracle Enterprise Strategy Team (EST) and associated Oracle Enterprise Architecture (OEA) practices are already engaged in promoting and leveraging the visibility of Enterprise Architecture as a key contributor to early IT investment validation, and we look forward in particular to seeing the real, citizen-centric benefits of this FEA Common Approach in particular surface across the entire Public Service CPIC domain - Federal, State, Local, Tribal and otherwise. Read more Enterprise Architecture blog posts for additional EA insight!

  Read the article

• Wireless doesn't work on a Broadcom BCM4312

  - by Boderick

  As stated, I've just upgraded to 12.04 and my Dell Inspiron 1545 isn't recognising its wireless card and I was wondering if anybody could help? Edit: Okay, so I found the wireless card by using lspci -vvv and it returned this: 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) Subsystem: Dell Wireless 1397 WLAN Mini-Card Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- Kernel modules: ssb lsmod Module Size Used by dm_crypt 22528 0 joydev 17393 0 dell_wmi 12601 0 sparse_keymap 13658 1 dell_wmi dell_laptop 13671 0 dcdbas 14098 1 dell_laptop psmouse 72919 0 uvcvideo 67203 0 serio_raw 13027 0 videodev 86588 1 uvcvideo snd_hda_codec_idt 60251 1 mac_hid 13077 0 snd_hda_intel 32765 5 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec parport_pc 32114 0 rfcomm 38139 0 bnep 17830 2 ppdev 12849 0 snd_pcm 80845 3 snd_hda_intel,snd_hda_codec bluetooth 158438 10 rfcomm,bnep snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq binfmt_misc 17292 1 snd 62064 18 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 parport_pc,ppdev,lp sky2 53628 0 ums_realtek 17920 0 uas 17699 0 i915 414603 3 wmi 18744 1 dell_wmi drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 usb_storage 39646 1 ums_realtek ifconfig -a eth0 Link encap:Ethernet HWaddr 00:23:ae:24:71:45 inet addr:192.168.1.158 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::223:aeff:fe24:7145/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14340 errors:0 dropped:0 overruns:0 frame:0 TX packets:10191 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15403754 (15.4 MB) TX bytes:1262570 (1.2 MB) Interrupt:18 ham0 Link encap:Ethernet HWaddr 7a:79:05:2d:b0:f7 inet addr:5.45.176.247 Bcast:5.255.255.255 Mask:255.0.0.0 inet6 addr: fe80::7879:5ff:fe2d:b0f7/64 Scope:Link inet6 addr: 2620:9b::52d:b0f7/96 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1404 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:179 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:27480 (27.4 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:433 errors:0 dropped:0 overruns:0 frame:0 TX packets:433 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:60051 (60.0 KB) TX bytes:60051 (60.0 KB) iwconfig lo no wireless extensions. ham0 no wireless extensions. eth0 no wireless extensions. the results for sudo lshw -class network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0c:00.0 logical name: eth1 version: 01 serial: 00:22:5f:77:1f:e6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f69fc000-f69fffff *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 13 serial: 00:23:ae:24:71:45 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.158 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:f68fc000-f68fffff ioport:de00(size=256) *-network description: Ethernet interface physical id: 2 logical name: ham0 serial: 7a:79:05:2d:b0:f7 size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.45.176.247 link=yes multicast=yes port=twisted pair speed=10Mbit/s and the results of rfkill list all 0: brcmwl-0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes

  Read the article

• Calculating for leap year [migrated]

  - by Bradley Bauer

  I've written this program using Java in Eclipse. I was able to utilize a formula I found that I explained in the commented out section. Using the for loop I can iterate through each month of the year, which I feel good about in that code, it seems clean and smooth to me. Maybe I could give the variables full names to make everything more readable but I'm just using the formula in its basic essence :) Well my problem is it doesn't calculate correctly for years like 2008... Leap Years. I know that if (year % 400 == 0 || (year % 4 == 0 && year % 100 != 0)) then we have a leap year. Maybe if the year is a leap year I need to subtract a certain amount of days from a certain month. Any solutions, or some direction would be great thanks :) package exercises; public class E28 { /* * Display the first days of each month * Enter the year * Enter first day of the year * * h = (q + (26 * (m + 1)) / 10 + k + k/4 + j/4 + 5j) % 7 * * h is the day of the week (0: Saturday, 1: Sunday ......) * q is the day of the month * m is the month (3: March 4: April.... January and Feburary are 13 and 14) * j is the century (year / 100) * k is the year of the century (year %100) * */ public static void main(String[] args) { java.util.Scanner input = new java.util.Scanner(System.in); System.out.print("Enter the year: "); int year = input.nextInt(); int j = year / 100; // Find century for formula int k = year % 100; // Find year of century for formula // Loop iterates 12 times. Guess why. for (int i = 1, m = i; i <= 12; i++) { // Make m = i. So loop processes formula once for each month if (m == 1 || m == 2) m += 12; // Formula requires that Jan and Feb are represented as 13 and 14 else m = i; // if not jan or feb, then set m to i int h = (1 + (26 * (m + 1)) / 10 + k + k/4 + j/4 + 5 * j) % 7; // Formula created by a really smart man somewhere // I let the control variable i steer the direction of the formual's m value String day; if (h == 0) day = "Saturday"; else if (h == 1) day = "Sunday"; else if (h == 2) day = "Monday"; else if (h == 3) day = "Tuesday"; else if (h == 4) day = "Wednesday"; else if (h == 5) day = "Thursday"; else day = "Friday"; switch (m) { case 13: System.out.println("January 1, " + year + " is " + day); break; case 14: System.out.println("Feburary 1, " + year + " is " + day); break; case 3: System.out.println("March 1, " + year + " is " + day); break; case 4: System.out.println("April 1, " + year + " is " + day); break; case 5: System.out.println("May 1, " + year + " is " + day); break; case 6: System.out.println("June 1, " + year + " is " + day); break; case 7: System.out.println("July 1, " + year + " is " + day); break; case 8: System.out.println("August 1, " + year + " is " + day); break; case 9: System.out.println("September 1, " + year + " is " + day); break; case 10: System.out.println("October 1, " + year + " is " + day); break; case 11: System.out.println("November 1, " + year + " is " + day); break; case 12: System.out.println("December 1, " + year + " is " + day); break; } } } }

  Read the article

• Head in the Clouds

  - by Tony Davis

  We're just past the second anniversary of the launch of Windows Azure. A couple of years' experience with Azure in the industry has provided some obvious success stories, but has deflated some of the initial marketing hyperbole. As a general principle, Azure seems to work well in providing a Service-Oriented Architecture for services in enterprises that suffer wide fluctuations in demand. Instead of being obliged to provide hardware sufficient for the occasional peaks in demand, one can hire capacity only when it is needed, and the cost of hosting an application is no longer a capital cost. It enables companies to avoid having to scale out hardware for peak periods only to see it underused for the rest of the time. A customer-facing application such as a concert ticketing system, which suffers high demand in short, predictable bursts of activity, is a great example of an application that would work well in Azure. However, moving existing applications to Azure isn't something to be done on impulse. Unless your application is .NET-based, and consists of 'stateless' components that communicate via queues, you are probably in for a lot of redevelopment work. It makes most sense for IT departments who are already deep in this .NET mindset, and who also want 'grown-up' methods of staging, testing, and deployment. Azure fits well with this culture and offers, as a bonus, good Visual Studio integration. The most-commonly stated barrier to porting these applications to Azure is the problem of reconciling the use of the cloud with legislation for data privacy and security. Putting databases in the cloud is a sticky issue for many and impossible for some due to compliance and security issues, the need for direct control over data, and so on. In the face of feedback from the early adopters of Azure, Microsoft has broadened the architectural choices to cater for a wide range of requirements. As well as SQL Azure Database (SAD) and Azure storage, the unstructured 'BLOB and Entity-Attribute-Value' NoSQL storage alternative (which equates more closely with folders and files than a database), Windows Azure offers a wide range of storage options including use of services such as oData: developers who are programming for Windows Azure can simply choose the one most appropriate for their needs. Secondly, and crucially, the Windows Azure architecture allows you the freedom to produce hybrid applications, where only those parts that need cloud-based hosting are deployed to Azure, whereas those parts that must unavoidably be hosted in a corporate datacenter can stay there. By using a hybrid architecture, it will seldom, if ever, be necessary to move an entire application to the cloud, along with personal and financial data. For example that we could port to Azure only put those parts of our ticketing application that capture and process tickets orders. Once an order is captured, the financial side can be processed in our own data center. In short, Windows Azure seems to be a very effective way of providing services that are subject to wide but predictable fluctuations in demand. Have you come to the same conclusions, or do you think I've got it wrong? If you've had experience with Azure, would you recommend it? It would be great to hear from you. Cheers, Tony.

  Read the article

• Google Fetch issue

  - by Karen

  When I do a Google fetch on any of my webpages the results are all the same (below). I'm not a programmer but I'm pretty sure this is not correct. Out of all the fetches I have done only one was different and the content length was 6x below and showed meta tags etc. Maybe this explains other issues I've been having with the site: a drop in indexed pages. Meta tag analyzer says I have no title tag, meta tags or description even though I do it on all pages. I had an SEO team working on the site and they were stumped by why pages were not getting indexed. So they figure it was some type of code error. Are they right? HTTP/1.1 200 OK Cache-Control: private Content-Type: text/html; charset=utf-8 Content-Encoding: gzip Vary: Accept-Encoding Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Thu, 11 Oct 2012 11:45:41 GMT Content-Length: 1054 <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title></title> <script type="text/javascript"> function getCookie(cookieName) { if (document.cookie.length > 0) { cookieStart = document.cookie.indexOf(cookieName + "="); if (cookieStart != -1) { cookieStart = cookieStart + cookieName.length + 1; cookieEnd = document.cookie.indexOf(";", cookieStart); if (cookieEnd == -1) cookieEnd = document.cookie.length; return unescape(document.cookie.substring(cookieStart, cookieEnd)); } } return ""; } function setTimezone() { var rightNow = new Date(); var jan1 = new Date(rightNow.getFullYear(), 0, 1, 0, 0, 0, 0); // jan 1st var june1 = new Date(rightNow.getFullYear(), 6, 1, 0, 0, 0, 0); // june 1st var temp = jan1.toGMTString(); var jan2 = new Date(temp.substring(0, temp.lastIndexOf(" ") - 1)); temp = june1.toGMTString(); var june2 = new Date(temp.substring(0, temp.lastIndexOf(" ") - 1)); var std_time_offset = (jan1 - jan2) / (1000 * 60 * 60); var daylight_time_offset = (june1 - june2) / (1000 * 60 * 60); var dst; if (std_time_offset == daylight_time_offset) { dst = "0"; // daylight savings time is NOT observed } else { // positive is southern, negative is northern hemisphere var hemisphere = std_time_offset - daylight_time_offset; if (hemisphere >= 0) std_time_offset = daylight_time_offset; dst = "1"; // daylight savings time is observed } var exdate = new Date(); var expiredays = 1; exdate.setDate(exdate.getDate() + expiredays); document.cookie = "TimeZoneOffset=" + std_time_offset + ";"; document.cookie = "Dst=" + dst + ";expires=" + exdate.toUTCString(); } function checkCookie() { var timeOffset = getCookie("TimeZoneOffset"); var dst = getCookie("Dst"); if (!timeOffset || !dst) { setTimezone(); window.location.reload(); } } </script> </head> <body onload="checkCookie()"> </body> </html>

  Read the article

• FBX Importer - Texture Name

  - by CmasterG

  I have a problem with the FBX SDK. I read in the data for the vertex position and the uv coordinates. It works fine, but now I want to read for each polygon to which texture it belongs, so that I can have models with multiple textures. Can anyone tell me how I can get the texture name (file name) for my polygon. My code to read in vertex position and uv coordinates is the following: int i, j, lPolygonCount = pMesh->GetPolygonCount(); FbxVector4* lControlPoints = pMesh->GetControlPoints(); int vertexId = 0; for (i = 0; i < lPolygonCount; i++) { int lPolygonSize = pMesh->GetPolygonSize(i); for (j = 0; j < lPolygonSize; j++) { int lControlPointIndex = pMesh->GetPolygonVertex(i, j); FbxVector4 pos = lControlPoints[lControlPointIndex]; current_model[vertex_index].x = pos.mData[0] - pivot_offset[0]; current_model[vertex_index].y = pos.mData[1] - pivot_offset[1]; current_model[vertex_index].z = pos.mData[2]- pivot_offset[2]; FbxVector4 vertex_normal; pMesh->GetPolygonVertexNormal(i,j, vertex_normal); current_model[vertex_index].nx = vertex_normal.mData[0]; current_model[vertex_index].ny = vertex_normal.mData[1]; current_model[vertex_index].nz = vertex_normal.mData[2]; //read in UV data FbxStringList lUVSetNameList; pMesh->GetUVSetNames(lUVSetNameList); //get lUVSetIndex-th uv set const char* lUVSetName = lUVSetNameList.GetStringAt(0); const FbxGeometryElementUV* lUVElement = pMesh->GetElementUV(lUVSetName); if(!lUVElement) continue; // only support mapping mode eByPolygonVertex and eByControlPoint if( lUVElement->GetMappingMode() != FbxGeometryElement::eByPolygonVertex && lUVElement->GetMappingMode() != FbxGeometryElement::eByControlPoint ) return; //index array, where holds the index referenced to the uv data const bool lUseIndex = lUVElement->GetReferenceMode() != FbxGeometryElement::eDirect; const int lIndexCount= (lUseIndex) ? lUVElement->GetIndexArray().GetCount() : 0; FbxVector2 lUVValue; //get the index of the current vertex in control points array int lPolyVertIndex = pMesh->GetPolygonVertex(i,j); //the UV index depends on the reference mode //int lUVIndex = lUseIndex ? lUVElement->GetIndexArray().GetAt(lPolyVertIndex) : lPolyVertIndex; int lUVIndex = pMesh->GetTextureUVIndex(i, j); lUVValue = lUVElement->GetDirectArray().GetAt(lUVIndex); current_model[vertex_index].tu = (float)lUVValue.mData[0]; current_model[vertex_index].tv = (float)lUVValue.mData[1]; vertex_index ++; } } float v1[3], v2[3], v3[3]; v1[0] = current_model[vertex_index - 3].x; v1[1] = current_model[vertex_index - 3].y; v1[2] = current_model[vertex_index - 3].z; v2[0] = current_model[vertex_index - 2].x; v2[1] = current_model[vertex_index - 2].y; v2[2] = current_model[vertex_index - 2].z; v3[0] = current_model[vertex_index - 1].x; v3[1] = current_model[vertex_index - 1].y; v3[2] = current_model[vertex_index - 1].z; collision_model->addTriangle(v1,v2,v3);

  Read the article

< Previous Page | 723 724 725 726 727 728 729 730 731 732 733 734  | Next Page >