Search Results

Search found 93388 results on 3736 pages for 'code structure'.

Page 729/3736 | < Previous Page | 725 726 727 728 729 730 731 732 733 734 735 736  | Next Page >

• Failing Sata HDD

  - by DaveCol

  I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• How are PID's generated?

  - by Helltone

  On *nix, PIDs are unique identifiers for running processes. How are PID's generated? Is it just an integer which gets incremented or a more complex structure such as a list? How do they get recycled? By recycling I mean that, when a process terminates, it's PID will eventually be reused by another process.

  Read the article

• System lockout, SAM error 12294

  - by Suneel

  We are facing a login issue due to a SAM error with the error code 12294. Event Type: Error Event Source: SAM Event Category: None Event ID: 12294 Date: Time: User: Computer: Description: The SAM database was unable to lockout the account of due to a resource error, such as a hard disk write failure (the specific error code is in the error data) . Accounts are locked after a certain number of bad passwords are provided so please consider resetting the password of the account mentioned above.

  Read the article

• NRPE Warning threshold must be a positive integer

  - by Frida

  OS: Ubuntu 12.10 Server 64bits I've installed Icinga, with ido2db, pnp4nagios and icinga-web (last release, following the instruction given in the documentation, installation with apt, etc). I am using icinga-web to monitor my hosts. For the moment, I have just my localhost, and all is perfect. I am trying to add a host and monitor it with NRPE (version 2.12): root@server:/etc/icinga# /usr/lib/nagios/plugins/check_nrpe -H client NRPE v2.12 The configuration looks good. I've created a file in /etc/icinga/objects/client.cfg as below on the server: root@server:/etc/icinga/objects# cat client.cfg define host{ use generic-host ; Name of host template to use host_name client alias client.toto address xx.xx.xx.xx } # Service Definitions define service{ use generic-service host_name client service_description CPU Load check_command check_nrpe_1arg!check_load } define service{ use generic-service host_name client service_description Number of Users check_command check_nrpe_1arg!check_users } And add in my /etc/icinga/commands.cfg: # this command runs a program $ARG1$ with no arguments define command { command_name check_nrpe command_line /usr/lib/nagios/plugins/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ -a $ARG2$ } # this command runs a program $ARG1$ with no arguments define command { command_name check_nrpe_1arg command_line /usr/lib/nagios/plugins/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ } But it does not work. These are the logs from the client: Dec 3 19:45:12 client nrpe[604]: Connection from xx.xx.xx.xx port 32641 Dec 3 19:45:12 client nrpe[604]: Host address is in allowed_hosts Dec 3 19:45:12 client nrpe[604]: Handling the connection... Dec 3 19:45:12 client nrpe[604]: Host is asking for command 'check_users' to be run... Dec 3 19:45:12 client nrpe[604]: Running command: /usr/lib/nagios/plugins/check_users -w -c Dec 3 19:45:12 client nrpe[604]: Command completed with return code 3 and output: check_users: Warning t hreshold must be a positive integer#012Usage:check_users -w -c Dec 3 19:45:12 client nrpe[604]: Return Code: 3, Output: check_users: Warning threshold must be a positive integer#012Usage:check_users -w -c Dec 3 19:44:49 client nrpe[32582]: Connection from xx.xx.xx.xx port 32129 Dec 3 19:44:49 client nrpe[32582]: Host address is in allowed_hosts Dec 3 19:44:49 client nrpe[32582]: Handling the connection... Dec 3 19:44:49 client nrpe[32582]: Host is asking for command 'check_load' to be run... Dec 3 19:44:49 client nrpe[32582]: Running command: /usr/lib/nagios/plugins/check_load -w -c Dec 3 19:44:49 client nrpe[32582]: Command completed with return code 3 and output: Warning threshold mu st be float or float triplet!#012#012Usage:check_load [-r] -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLO AD15 Dec 3 19:44:49 client nrpe[32582]: Return Code: 3, Output: Warning threshold must be float or float trip let!#012#012Usage:check_load [-r] -w WLOAD1,WLOAD5,WLOAD15 -c CLOAD1,CLOAD5,CLOAD15 Dec 3 19:44:49 client nrpe[32582]: Connection from xx.xx.xx.xx closed. Have you any ideas?

  Read the article

• Mac Terminal Copy on select like Putty

  - by Sergio Oliveira Jr.

  That putty option to select and then right-click to paste in the best invention after the mouse. Is there anyway to make the terminal do this? Hack the source code? Install something? Are the source code for the mac terminal public available? -Sergio

  Read the article

• SSH into Fedora 17 will not work with new users

  - by psion

  I just deployed a new Fedora 17 server on the Amazon EC2. I was able to log in as ec2-user with my generated keypair, but I cannot log in under normal circumstances as a user I created. This is just a normal ssh: ssh user@ip-address Any ideas on what is going on here? EDIT: This is a snippit from my sshd_config file # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no #PermitEmptyPasswords no PasswordAuthentication no EDIT AGAIN: This is the output of ssh -v. OpenSSH_5.8p2, OpenSSL 1.0.0i-fips 19 Apr 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to 107.23.2.165 [107.23.2.165] port 22. debug1: Connection established. debug1: identity file /home/psion/.ssh/id_rsa type 1 debug1: identity file /home/psion/.ssh/id_rsa-cert type -1 debug1: identity file /home/psion/.ssh/id_dsa type 2 debug1: identity file /home/psion/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Server host key: RSA 19:cb:84:21:a9:0e:83:96:2f:6a:fa:7d:ce:39:0f:31 debug1: Host '107.23.2.165' is known and matches the RSA host key. debug1: Found key in /home/psion/.ssh/known_hosts:5 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_1000' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Offering DSA public key: /home/psion/.ssh/id_dsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: Offering RSA public key: /home/psion/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

  Read the article

• Command line to UPGRADE Microsoft Security Essentials

  - by Drew

  I would like to know some command line code that will upGRADE Microsoft Security Essentials. There is code for upDATEing, but upGRADING is more elusive.

  Read the article

• Bladecenter-E Power Module fault

  - by Lihnjo

  We have problem on IBM Bladecenter-E Critical Events Power module 2 is off. DC fault. Power module 4 is off. DC fault. Warnings and System Events Insufficient chassis power to support redundancy What is the best solution for this problem? Thanks AMM Service Data Help SPAPP Capture Available 10/13/2010 17:03:47 1090347 bytes Time: 11/19/2012 11:02:31 UUID: 42E1 5D2F D7BF 41A6 A4A2 48D1 3FB7 0540 MAC Address xx:xx:xx:xx:xx:xx MM Information Name: nnnnn Contact: aaa, bbb, ccc, England Location: [email protected] IP address: 111.222.333.444 Date Time Information GMT offset: +1:00 - Central Europe Time (Western Europe, Algeria, Nigeria, Angola) Adjust for DST: Yes NTP: Enabled NTP Hostname/IP: 111.222.333.444 System Health: Critical System Status Summary One or more monitored parameters are abnormal. Critical Events Power module 2 is off. DC fault. Power module 4 is off. DC fault. Warnings and System Events Insufficient chassis power to support redundancy CHASSIS (BladeCenter-E) in CHASSIS slot: 01 TopoPath is "CHASSIS[1]". Description : BladeCenter-E Width : 1 Sub Type : BladeCenter (BC) Power Mode : 220 v KVM Owner : CHASSIS[1]/BLADE[9] MT Owner : CHASSIS[1]/MGMT_MOD[1] Component Type : CHASSIS Inventory: VPD ID: 336 (decimal) POS ID EXT: 0 (decimal) POS ID: 8 (decimal) Machine Type/Model: 86773RG Machine Serial Number: 99ZL816 Part Number: 39R8561 FRU Number: 39R8563 FRU Serial Number: YK109174W1HV Manufacturer ID: IBM Hardware Revision: 3 (decimal) Manufacture Date: 18 (wk), 07 (yr) UUID: 42E1 5D2F D7BF 41A6 A4A2 48D1 3FB7 0540 (hex) Type Code: 97 (decimal) Sub-type Code: 0 (decimal) IANA Num: 336 (decimal) Product ID: 8 (decimal) Manufacturer Sub ID: FOXC Enviroment data: -------------- Type: : POWER_USAGE Unit: : WATTS Reading: : 0xa Sensor Label: : Midplane Sensor ID: : 0x0 MGMT MOD (Advanced Management Module) in MGMT_MOD slot: 01 TopoPath is "CHASSIS[1]/MGMT_MOD[1]". Description : Advanced Management Module Name : kant Width : 1 Component Role : Primary Component Type : MGMT MOD Insert Time : 28050132 Inventory: VPD ID: 288 (decimal) POS ID EXT: 0 (decimal) POS ID: 4 (decimal) Part Number: 39Y9659 FRU Number: 39Y9661 FRU Serial Number: YK11836CE2RC Manufacturer ID: IBM Hardware Revision: 4 (decimal) Manufacture Date: 50 (wk), 06 (yr) UUID: 1D95 9937 8CA5 11DB 9499 0014 5EDF 1C98 (hex) Type Code: 81 (decimal) Sub-type Code: 1 (decimal) IANA Num: 20301 (decimal) Product ID: 65 (decimal) Manufacturer Sub ID: ASUS Firmware data: Type : AMM firmware Build ID : BPET50P File Name : CNETCMUS.PKT Release Date : 03/26/2010 Release Level : 50 Revision - Major: 80 Port info: ======================================================== Topology Path ID : 1 Label : External Phy Orientation : EXTERNAL Port Number : 1 Type : MGT Physical Meidum : Copper Number of Link Intferfaces : 1 ------------------------------------ Link Ifc ID Number : 1 Link Ifc Transport Protocol : ENET Link Ifc Addr Type : MAC Link Ifc Burned-in Addr : xx:xx:xx:xx:xx:xx Link Ifc Admin Addr : 00:00:00:00:00:00 Link Ifc Addr in use : xx:xx:xx:xx:xx:xx ---------------------------------------------------------- Configuration behaviors: Save Only Enviroment data: -------------- Type: : TEMPERATURE Unit: : DEGREES_C Reading: : 38.00 Sensor Label: : MM Ambient Sensor ID: : 0x0 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +4.81 Sensor Label: : +5V Sensor ID: : 0x1b -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +3.26 Sensor Label: : +3.3V Sensor ID: : 0x19 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +11.97 Sensor Label: : +12V Sensor ID: : 0x16 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : -4.88 Sensor Label: : -5V Sensor ID: : 0x1e -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +2.47 Sensor Label: : +2.5V Sensor ID: : 0x18 -------------- Type: : VOLTAGE Unit: : VOLTS Reading: : +1.76 Sensor Label: : +1.8V Sensor ID: : 0x15 -------------- Type: : POWER_USAGE Unit: : WATTS Reading: : 0x19 Sensor Label: : kant Sensor ID: : 0x0

  Read the article

• Constructing radiotap header and ieee80211 header structures for packet injection

  - by hektor

  I am trying to communicate between two laptop machines using Wifi. The structure of the radiotap header and ieee80211 header I am using is: struct ieee80211_radiotap_header { unsigned char it_version; uint16_t it_len; uint32_t it_present; }; /* Structure for 80211 header */ struct ieee80211_hdr_3addr { uint16_t frame_ctl[2]; uint16_t duration_id; unsigned char addr1[ETH_ALEN]; unsigned char addr2[ETH_ALEN]; unsigned char addr3[ETH_ALEN]; uint16_t seq_ctl; }; struct packet { struct ieee80211_radiotap_header rtap_header; struct ieee80211_hdr_3addr iee802_header; unsigned char payload[30]; }; /* In main program */ struct packet mypacket; struct ieee80211_radiotap_header ratap_header; struct ieee80211_hdr_3addr iee802_header; unsigned char addr1[ETH_ALEN] = {0xFF,0xFF,0xFF,0xFF,0xFF,0xFF}; /* broadcast address */ unsigned char addr2[ETH_ALEN] = {0x28,0xcf,0xda,0xde,0xd3,0xcc}; /* mac address of network card */ unsigned char addr3[ETH_ALEN] = {0xd8,0xc7,0xc8,0xd7,0x9f,0x21}; /* mac address of access point i am trying to connect to */ /* Radio tap header data */ ratap_header.it_version = 0x00; ratap_header.it_len = 0x07; ratap_header.it_present = (1 << IEEE80211_RADIOTAP_RATE); mypacket.rtap_header = ratap_header; /* ieee80211 header data */ iee802_header.frame_ctl[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON; iee802_header.frame_ctl[1] =IEEE80211_FC1_DIR_NODS; strcpy(iee802_header.addr1,addr1); strcpy(iee802_header.addr2,addr2); strcpy(iee802_header.addr3,addr3); iee802_header.seq_ctl = 0x1086; mypacket.iee802_header=iee802_header; /* Payload */ unsigned char payload[PACKET_LENGTH]="temp"; strcpy(mypacket.payload , payload); I am able to receive the packets when I test the transmission and reception on the same laptop. However I am not able to receive the packet transmitted on a different laptop. Wireshark does not show the packet as well. Can anyone point out the mistake I am making?

  Read the article

• JavaMail application won't send email to external SMTP server

  - by Luiz Cruz

  This is actually a question from an exam, but I believe it could help others troubleshooting a similar situation. In a system, an e-mail needs to be sent to a certain mailbox. The following Java code, which is part of a larger system, was developed for that. Assume that "example.com" corresponds to a valid registered internet domain. public void sendEmail(){ String s1=”Warning”; String b1=”Contact IT support.”; String r1=”[email protected]”; String d1=”[email protected]”; String h1=”mx.intranet”; Properties p1 = new Properties(); p1.put(“mail.host”, h1); Session session = Session.getDefaultInstance(p1, null); MimeMessage message = new MimeMessage(session); try { message.setFrom(new InternetAddress(r1)); message.addRecipient(Message.RecipientType.TO, new InternetAddress(d1)); message.setSubject(s1); message.setText(b1); Transport.send(message); } catch (MessagingException e){ System.err.println(e); } } The execution of this code, within the testing environment of an application server, does NOT work as expected. The mailbox of the "example.com" server never receives the email, even tough all string values in the code are correctly attributed. The output for the command "netstat -np TCP" in the application server during execution is shown bellow: Src Add Src Port Dest Add Dest Port State 192.168.5.5 54395 192.168.7.1 25 SYN_SENT 192.168.5.5 54390 192.168.7.1 110 TIME_WAIT 192.168.5.5 52001 200.218.208.118 80 CLOSE_WAIT 192.168.5.5 52050 200.218.208.118 80 ESTABLISHED 192.168.5.5 50001 200.255.94.202 25 TIME_WAIT 192.168.5.5 50000 200.255.94.202 25 ESTABLISHED With the exception of the lines that were NAT'd, all others are associated with the Java application server, which created them after the execution of the code above. The e-mail server used in this environment is the production server, which is online and does not require any authentication for internal connections. Based on this situation, point out three possible causes for the problem.

  Read the article

• How to copy file preserving directory path in Linux?

  - by gasan

  I have Eclipse projects and ".project" file in them, the directory structure looks like 'myProject/.project'. I want to copy these '.project' files to another directory, but I want the enclosing directory name to be preserved. Let's say I have 'a/myProject/.project', I want to copy 'myProject/.project' to 'b', so it be 'b/myProject/.project', but 'b/myProject' doesn't exist. When I try in a: cp -r ./myProject/.project ../b it copies only '.project' file itself, without 'myProject' directory. Please advise.

  Read the article

• FAT filesystem analysis tool

  - by Andy

  I have a dump a FAT file system. Is there a windows tool I can use to analyse it, including: Provide basic information (sector size etc.) Validate the file system, basic corruption checking Allow the files and directory structure to be viewed and possibly edited (i.e mounting as a windows partition) Thanks, Andy

  Read the article

• is there a vba query string length limit and a way to overcome this issue?

  - by datatoo

  I am trying to combine multiple audit tables, and then filter the results into an excel sheet. The Union All and parameters make the query in excess of 1200 characters. It appears the string is truncated when running this. What recommendations can anyone make. I have no control over the database structure and am only reading foxpro free tables. Thanks for suggestions

  Read the article

• Tool to automatically combine many large pivot table in many large Excel sheet ?

  - by Sim

  Hi all, We have several Excel files that contains large pivot data table with the same structure For example File A Pivot table (Field A, B, C) File B Pivot table (Field A, B, C) We want to combine them into 1 pivot table (A, B, C). Just want to know which ways we can do it ? Manual way : open a new empty sheet, copy and paste the pivot there and create the pivot again Automatic way : is there some tool that did this ? Thanks

  Read the article

• movie maker problem: re-map paths

  - by Fuxi

  hi, i've upgraded to win7 (on a new machine) and wanted to use my old moviemaker projects again. the problem is that those projects refer to files of a certain path-structure which i can't rebuild under win7 ("documents and settings" is blocked). is there a way to kind of batch-convert those projects? some file specs of the MSWMM file format (for coding a little utility) would be helpful aswell. thx

  Read the article

• How can I automatically cycle a new image in an AWS Auto Scaling Group?

  - by JustinY

  I have a web application setup with a load balancer and auto scaling group to manage scaling. The source code is in a git repository so I don't have to update the images when the code changes, but occasionally the environment changes so we create a new image. Then that image needs to be cycled into the auto scaling group. Is there a way to cycle the images automatically? Right now I schedule a scale up and scale down action which gets rid of the old instances.

  Read the article

• Changed Folder Redirection on Server 2008 R2, I didn't see anything change.

  - by Robert Hurst

  I need some help guys. I've just modified the Folder Redirection Policy on my server at work so the hiarcy resembles windows 7's user folder structure rather than XP. I did this to the book so I know its right. However, I'm still seeing that all the user accounts are still layed out as XP compatible folder hiracys. Is there somthing I need to do to update these accounts with the new policy?

  Read the article

• git, egit, submodules, and symlinks -- how should shared sub-projects be handled in eclipse?

  - by Autophil

  Question: what's the best way to handle sub-projects in eclipse when using git for SCM? Here's the situation. I have a few git projects with a directory structure layed out more or less like this: simpleproj app www admin demo lib model orm view model user blah ... storeproj app www about mobile fbapp lib model orm view model user message cart product merchant Each directory in "lib" contains a separate project, either created in-house or forked, all of which use git for source control. So I figured I should make them submodules of my projects, right? Well, we've been moving toward eclipse + egit, because some of our windows guys not used to a CLI need something they can use without being scared of screwing things up. Anyway, the problem is, egit doesn't support submodules. So, my solution has been a rather crude one involving symlinks... lets say my directory structure on my dev box is generally layed out like this: ~/projects/ bigproj .git app lib model (- ~/lib/model/src/) orm (- ~/lib/orm/src/) neatproj .git app lib view (- ~/lib/view/src/) oldproj .git app lib orm (- ~/lib/orm/src/) ~/lib/ model .git src README.md orm .git src COPYING view .git src ...the symlinks link to a subdirectory of the directory containing the git repo, so eclipse doesn't get confused, and everything sort of works. On my machine, I can update the libs from anywhere and all projects will be updated (needing to be committed again of course). Each project stores a separate copy of the contents of the symlinked directories within "lib" -- but only when staged from within eclipse. After committing from eclipse and moving back to the CLI, git sees that a bunch of files have been removed and a few symlinks have been created. Of course this is acceptable also, probably more so than keeping a separate history of the libs for each project... but eclipse and CLI git obviously need to be on the same page so tons of files aren't vanishing and reappearing. So this brings me to my question. I'd like to know how to either: get eclipse+egit to see the symlinks as symlinks if git will somehow handle them properly*, or get the CLI git to treat them as non-symlinks. Or, if there's a better way to do this, I'm all ears. Hope this all made sense! :D Note: tried to tag this as git-submodules, but was not allowed :( * should I make them relative or absolute? Either way it's a mess. Also will symlinks will work on windows? i know there's something similar but you need a 3rd party tool to manage them AFAIK, i doubt these would translate well.

  Read the article

• Need a good mp3/internet radio organization system...

  - by Zombies

  So I feel that winamp alone doesn't work well for me. I have this one playlist that all kinds of stuff gets crammed into. I need a system (this can easily be 1 program or several): Need to be able to... play mp3's from my library (just a directory structure with mp3's). Save radio station's, and easily remove/add new stations play random mp3's which are not part of my library and will probably be deleted in the future, yet won't clutter my library index!

  Read the article

• Helicon ISAPI_REWRITE for masking folder

  - by Brian

  Hello, I would like to use the ISAPI_REWRITE module to rewrite a url: www.site.com/app/ to www.site.com So that the user doesn't see the folder where the application is... the reason why isn't important, but essentially I need to mask this folder due to an IIS structure change. Any help would be appreciated. I need to remap any requested file in the app directory and any related subdirectory to the main URL. Thanks.

  Read the article

• How can I sort my data while keeping paired rows together?

  - by Joe Lee Frank

  How can I pair two rows on a spreadsheet, so that for each data entry I can sort the matrix but the pair of rows moves as a single list of data, retaining the structure of the two rows? For example: Original entry A1,1 B1,1 C1,1 D1,1 A1,2 B1,2 C1,2 D1,2 A2,1 B2,1 C2,1 D2,1 A2,2 B2,2 C2,2 D2,2 Sorted reverse order A2,1 B2,1 C2,1 D2,1 A2,2 B2,2 C2,2 D2,2 A1,1 B1,1 C1,1 D1,1 A1,2 B1,2 C1,2 D1,2

  Read the article

• How decode xfs lost+found directory

  - by Satpal

  I have managed to trash my homebrew Nas box (an old hp d530 + 2x 750gb sata soft raid1 + 17gb boot disk with ubuntu server 8.10) I have searched the web and tried to repair the file system but to no avail :( I was thinking that the dirs/files located under the root of the lost+found directory are 64 bit numbers. Is there any way that I could decant the number into binary form, from there reconstruct the directory/file structure. More to the point can anyone point to the information on how xfs inodes are broken down(does that make sense)?

  Read the article

• What is the syntax for combining Word field codes?

  - by MADCookie

  I want to create a hyperlink to the location of my Word document. The document is on an web server so its path is like http://myserver.com/folder/worddocument.docx. I can use the field code "FILENAME" and the field code "HYPERLINK", but I can't figure out how to use them together. File name: { FILENAME \* Lower \p \* MERGERFORMAT } Hyperlink: { HYPERLINK "http://myserver.com/folder/worddocument.docx" }

  Read the article

• Simple jail for user with open-ssh

  - by Vikram

  Can I confine my users to their /home/%u directory using simply open-ssh configuration? I did the following from what I found on the Internet Stopped the server To the sshd_config file appended the following Match group sftpusers ChrootDirectory /home/%u X11Forwarding no AllowTcpForwarding no started the server FYI I have the users added to sftpusers group My users can still access entire file structure on my system Ubuntu Server 12.04 LTS with open-ssh installed

  Read the article

• Passwordless ssh failed when login using username

  - by Aczire

  I was trying to setup Hadoop and was stumbled on passwordless ssh to localhost. I am getting a password prompt when trying to connect using ssh username@hostname format. But there is no problem connecting to the machine like ssh localhost or ssh hostname.com. Tried ssh-copy-id user@hostname but it did not work. Using CentOS 6.3 as normal user, I neither have root access or am a sudoer so editing any files like sshd_config is not possible (not even cat the sshd_config file contents). I hope the user login is possible since I can do login without password to localhost, right? Please advise, Here is the ssh debug output. [[email protected] ~]$ ssh -v [email protected] OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to hostname.com [::1] port 22. debug1: Connection established. debug1: identity file /home/user/.ssh/identity type -1 debug1: identity file /home/user/.ssh/id_rsa type -1 debug1: identity file /home/user/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'hostname.com' is known and matches the RSA host key. debug1: Found key in /home/user/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Offering public key: /home/user/.ssh/id_dsa debug1: Server accepts key: pkalg ssh-dss blen 434 Agent admitted failure to sign using the key. debug1: Trying private key: /home/user/.ssh/identity debug1: Trying private key: /home/user/.ssh/id_rsa debug1: Next authentication method: password [email protected]'s password:

  Read the article

< Previous Page | 725 726 727 728 729 730 731 732 733 734 735 736  | Next Page >