dynamic programming - Page 729

Getting caught in loops - R

- by user334898

I am looking at whether or not certain 'systems' for betting really do work as claimed, namely, that they have a positive expectation. One such system is based on the rebate on loss. You basically have a large master pot, say $1 million. Your bankroll for each game is $50k. The way it works, is as follows: 1) Start with $50k, always bet on banker 2) If you win, add the money to the master pot. Then play again with $50k. 3) If you lose(now you're at $30k) play till you either: (a) hit 0, you get a rebate of 10%. Begin playing again with $50k+5k=$55k. (b) If you win more than the initial bankroll, add the money to the master pot. Then play again with $50k. 4) Continue until you double the master pot. I just cant find an easy way of programming out the possible cases in R, since you can eventually go down an improbable path. For example, you start at 50k, lose 20, win 19, now you're at 49, now you lose 20, lose 20, now youre at 9, you either lose 9 and get back 5k or you win and this cycle continues until you either end up with more than 50k or hit 0 and get the rebate on the 50k and start again with $50k +5k. Here's some code i started, but i havent figured out a good way of handling the cases where you get stuck and keeping track of the number of games played. Thanks again for your help. Obviously, I understand you may be busy and not have time. p.loss <- .4462466 p.win <- .4585974 p.tie <- 1 - (p.win+p.loss) prob <- c(p.win,p.tie,p.loss) bet<-20 x <- c(19,0,-20) r <- 10 # rebate = 20% br.i <- 50 br<-200 #for(i in 1:100){ # cbr.i<-0 y <- sample(x,1,replace=T,prob) cbr.i<-y+br.i if(cbr.i > br.i){ br<-br+(cbr.i-br.i); cbr.i<-br.i; }else{ y <- sample(x,2,replace=T,prob); if( sum(y)< cbr.i ){ cbr.i<-br.i+(1/r)*br.i; br<-br-br.i} cbr.i<-y+ }else{ cbr.i<- sum(y) + cbr.i; }if(cbr.i <= bet){ y <- sample(x,1,replace=T,prob) if(abs(y)>cbr.i){ cbr.i<-br.i+(1/r)*br.i } }

Read the article

How can I obtain the IPv4 address of the client?

- by Dr Dork

Hello! I'm prepping for a simple work project and am trying to familiarize myself with the basics of socket programming in a Unix dev environment. At this point, I have some basic server side code setup to listen for incoming TCP connection requests from clients after the parent socket has been created and is set to listen... int sockfd, newfd; unsigned int len; socklen_t sin_size; char msg[]="Test message sent"; char buf[MAXLEN]; int st, rv; struct addrinfo hints, *serverinfo, *p; struct sockaddr_storage client; char ip[INET6_ADDRSTRLEN]; . . //parent socket creation and listen code omitted for simplicity . //wait for connection requests from clients while(1) { //Returns the socketID and address of client connecting to socket if( ( newfd = accept(sockfd, (struct sockaddr *)&client, &len) ) == -1 ){ perror("Accept"); exit(-1); } if( (rv = recv(newfd, buf, MAXLEN-1, 0 )) == -1) { perror("Recv"); exit(-1); } struct sockaddr_in *clientAddr = ( struct sockaddr_in *) get_in_addr((struct sockaddr *)&client); inet_ntop(client.ss_family, clientAddr, ip, sizeof ip); printf("Receive from %s: query type is %s\n", ip, buf); if( ( st = send(newfd, msg, strlen(msg), 0)) == -1 ) { perror("Send"); exit(-1); } //ntohs is used to avoid big-endian and little endian compatibility issues printf("Send %d byte to port %d\n", ntohs(clientAddr->sin_port) ); close(newfd); } } I found the get_in_addr function online and placed it at the top of my code and use it to obtain the IP address of the client connecting... // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } but the function always returns the IPv6 IP address since thats what the sa_family property is set as. My question is, is the IPv4 IP address stored anywhere in the data I'm using and, if so, how can I access it? Thanks so much in advance for all your help!

Read the article

What's the fastest lookup algorithm for a key, pair data structure (i.e, a map)?

- by truncheon

In the following example a std::map structure is filled with 26 values from A - Z (for key) and 0 – 26 for value. The time taken (on my system) to lookup the last entry (10000000 times) is roughly 250 ms for the vector, and 125 ms for the map. (I compiled using release mode, with O3 option turned on for g++ 4.4) But if for some odd reason I wanted better performance than the std::map, what data structures and functions would I need to consider using? I apologize if the answer seems obvious to you, but I haven't had much experience in the performance critical aspects of C++ programming. #include <ctime> #include <map> #include <vector> #include <iostream> struct mystruct { char key; int value; mystruct(char k = 0, int v = 0) : key(k), value(v) { } }; int find(const std::vector<mystruct>& ref, char key) { for (std::vector<mystruct>::const_iterator i = ref.begin(); i != ref.end(); ++i) if (i->key == key) return i->value; return -1; } int main() { std::map<char, int> mymap; std::vector<mystruct> myvec; for (int i = 'a'; i < 'a' + 26; ++i) { mymap[i] = i - 'a'; myvec.push_back(mystruct(i, i - 'a')); } int pre = clock(); for (int i = 0; i < 10000000; ++i) { find(myvec, 'z'); } std::cout << "linear scan: milli " << clock() - pre << "\n"; pre = clock(); for (int i = 0; i < 10000000; ++i) { mymap['z']; } std::cout << "map scan: milli " << clock() - pre << "\n"; return 0; }

Read the article

How can I obtain the IP address of my server program?

- by Dr Dork

Hello! This question is related to another question I just posted. I'm prepping for a simple work project and am trying to familiarize myself with the basics of socket programming in a Unix dev environment. At this point, I have some basic server side code and client side code setup to communicate. Currently, my client code successfully connects to the server code and the server code sends it a test message, then both quit out. Perfect! That's exactly what I wanted to accomplish. Now I'm playing around with the functions used to obtain info about the two environments (server and client). I'd like to obtain my server program's IP address. Here's the code I currently have to do this, but it's not working... int sockfd; unsigned int len; socklen_t sin_size; char msg[]="test message"; char buf[MAXLEN]; int st, rv; struct addrinfo hints, *serverinfo, *p; struct sockaddr_storage client; char s[INET6_ADDRSTRLEN]; char ip[INET6_ADDRSTRLEN]; //zero struct memset(&hints,0,sizeof(hints)); hints.ai_family = AF_UNSPEC; hints.ai_socktype = SOCK_STREAM; hints.ai_flags = AI_PASSIVE; //get the server info if((rv = getaddrinfo(NULL, SERVERPORT, &hints, &serverinfo ) != 0)){ perror("getaddrinfo"); exit(-1); } // loop through all the results and bind to the first we can for( p = serverinfo; p != NULL; p = p->ai_next) { //Setup the socket if( (sockfd = socket( p->ai_family, p->ai_socktype, p->ai_protocol )) == -1 ) { perror("socket"); continue; } //Associate a socket id with an address to which other processes can connect if(bind(sockfd, p->ai_addr, p->ai_addrlen) == -1){ close(sockfd); perror("bind"); continue; } break; } if( p == NULL ){ perror("Fail to bind"); } inet_ntop(p->ai_family, get_in_addr((struct sockaddr *)p->ai_addr), s, sizeof(s)); printf("Server has TCP Port %s and IP Address %s\n", SERVERPORT, s); and the output for the IP is always empty... server has TCP Port 21412 and IP Address :: any ideas for what I'm missing? thanks in advance for your help! this stuff is really complicated at first.

Read the article

Getting Frequency Components with FFT

- by ruhig brauner

so I was able to solv my last problem but i stubmled upon the next already. So I want to make a simple spectrogram but in oder to do so I want to understand how FFT-libaries work and what they actually calculate and return. (FFT and Signal Processing is the number 1 topic I will get into as soon as I have time but right now, I only have time for some programming exercises in the evening. ;) ) Here I just summarized the most important parts: int framesPerSecond; int samplesPerSecond; int samplesPerCycle; // right now i want to refresh the spectogram every DoubleFFT_1D fft; WAVReader audioIn; double audioL[], audioR[]; double fftL[], fftR[]; ..... framesPerSecond = 30; audioIn= new WAVReader("Strobe.wav"); int samplesPerSecond = (int)audioIn.GetSampleRate(); samplesPerCycle = (int)(audioIn.GetSampleRate()/framesPerSecond); audioL = new double[samplesPerCycle*2]; audioR = new double[samplesPerCycle*2]; fftL = new double[samplesPerCycle]; fftR = new double[samplesPerCycle]; for(int i = 0; i < samplesPerCycle; i++) { // don't even know why,... fftL[i] = 0; fftR[i] = 0; } fft = new DoubleFFT_1D(samplesPerCycle); ..... for(int i = 0; i < samplesPerCycle; i++) { audioIn.GetStereoSamples(temp); audioL[i]=temp[0]; audioR[i]=temp[1]; } fft.realForwardFull(audioL); //still stereo fft.realForwardFull(audioR); System.out.println("Check"); for(int i = 0; i < samplesPerCycle; i++) { //storing the magnitude in the fftL/R arrays fftL[i] = Math.sqrt(audioL[2*i]*audioL[2*i] + audioL[2*i+1]*audioL[2*i+1]); fftR[i] = Math.sqrt(audioR[2*i]*audioR[2*i] + audioR[2*i+1]*audioR[2*i+1]); } So the question is, if I want to know, what frequencys are in the sampled signal, how do I calculate them? (When I want to print the fftL / fftR arrays, I get some exponential formes at both ends of the array.) Thx :)

Read the article

Advice needed: stay with Java team or move to C++ team?

- by user68759

Some background - I have been programming in Java as a professional for the last few years. This is mainly using Java SE. I have also touched bits and pieces of other various Java technologies and have some basic knowledge about them. I consider my self as an intermediate Java programmer. I like Java very much. I think it is only going to get bigger. Recently, my manager asked my opinion on whether I would like to be transferred to another team within the company that is developing a product in C++. This is mainly because my current Java team simply didn't make enough money due to poor sales and the economic downturn. Now, I have never had any experience with C++ nor have I ever coded a single line of code in C++. I have always wanted to learn it and now is my chance. But I really want to make sure I get benefit out of it in the future, in the sense that I will have the skills that will still be on-demand in the future. So, what do you experts think? Is C++ still the language to learn these days to secure yourself for the future? What will I learn more in C++ but not in Java? And are they worthy to learn considering the current and possible future demands in IT industry? (Apart from the obvious more control over memory management and something along that line.) What is a good excuse to refuse the offer in order to stay with the Java team? I don't want to blatantly refuse it because you can never predict the future and I could possibly come back to my manager in the future and ask him to transfer me to the C++ team. How do I say it nicely that I am taking the offer but I would like to still be involved with Java one way or another, such as when there is a new Java project I would like to be considered. I have to admit that I am kind of 50-50 at the moment. I want to learn C++ for the sake of improving my skills and also helping my company to reduce the fund required for the Java team. But it is also hard for me to leave Java because I know Java is going to get bigger, so I am afraid of getting behind when I start concentrating on C++. I could, of course, decide to just join the C++ team, and then spend my free time reading about Java to keep in touch with it, but I thought I would ask anyway in case some people can point out the strong points of either over the other given the current and possibly future circumstances.

Read the article

Database advantages? Access, MySQL, msSQL, or any others?

- by JimZ

Dear all Stackoverflowers, I just started to learn programming and now I'm putting this question online based on a quote: no question is silly My work needs to develop a order system based on web, which wants a database system. Since using Excel for years as a general office user, I naturally turn this to Access. However, most people say Access is very limited comparing to MySQL or MSSQL, or any other more professional database system. But after developing some functions for my company's order system, I really find Access can fulfill my request. And I also tried MSSQL to develop, which I found it not quite convenient to use. I have searched in stackoverflow and find no general answer about my doubt. Now I am sincerely hoping some experienced and professional developers could clear my doubts. Now I'm listing some Access advantages, which I don't think other database system have. I hope you could help me also find these advantages in others. 1. Access is portable, I can just copy a xxx.accdb file to my company and continue with development. 2. Access is easy to generate helpful table, for example, it will automatically generate a field that can automatically count, could be used as primary key value. 3. it is more compatable with Excel, to display and filter data. 4. importantly, it nerely needs no environment to setup, just needs MS Office to be installed. ............others However, I also find some points that MSSQL is advantaged: 1. security reasons 2. easy to backup, ( just use BACKUP..... sql statement to do it) 3. can edit stored procedure to save some functions to database ...............others specifically, I wish some friends could tell me how to make other database portable? since I usually work both at home and in office. It's a headache to move MSSQL work to my office, since the version of MSSQL is not the same. Thank you all and best regards, :)

Read the article

Flickering Image in Java?

- by Noah Cagle

OK so I am coding a game right now to prepair for Ludum Dare SharkJam, and I am using a new method for programming, because the last method I had crashes my PC, so this one should work. Well it does work and all, better too, but the images that I put in it flicker. Here is the whole main class (where the images are drawn) package me.NoahCagle.watermaze; import java.awt.Color; import java.awt.Graphics; import java.awt.Image; import java.awt.image.BufferedImage; import javax.swing.JFrame; import me.NoahCagle.watermaze.entity.EntityShark; import me.NoahCagle.watermaze.entity.Player; import me.NoahCagle.watermaze.input.Keys; import me.NoahCagle.watermaze.map.Map; public class Game extends JFrame { private static final long serialVersionUID = 1L; Map map = new Map(0, 0); Player player = new Player(50, 30); static EntityShark shark = new EntityShark(400, 400); public Image dbImage; public Game() { setSize(800, 600); setDefaultCloseOperation(EXIT_ON_CLOSE); setLocationRelativeTo(null); setVisible(true); setTitle("Water Maze"); setResizable(false); setBackground(Color.blue); addKeyListener(new Keys()); } public static void main(String[] args) { new Game(); Thread s = new Thread(shark); s.start(); } public void paint(Graphics g) { dbImage = new BufferedImage(getWidth(), getHeight(), BufferedImage.TYPE_INT_RGB); g.drawImage(dbImage, map.x, map.y, null); g.drawImage(player.player, player.x, player.y, this); g.drawImage(shark.shark, shark.x, shark.y, this); repaint(); } } What this code does for me is makes the Images work correctly, just flickering, alot. Can anyone help me with my issue? EDIT: I think it has something to do with where I call the repaint method in the paint method, so look there.

Read the article

Need advice about pointers and time elapsed program. How to fix invalid operands and cannot convert errors?

- by user1781382

I am trying to write a program that tells the difference between the two times the user inputs. I am not sure how to go about this. I get the errors : Line 27|error: invalid operands of types 'int' and 'const MyTime*' to binary 'operator-'| Line |39|error: cannot convert 'MyTime' to 'const MyTime*' for argument '1' to 'int DetermineElapsedTime(const MyTime*, const MyTime*)'| I also need a lot of help in this problem. I don't have a good curriculum, and my class textbook is like cliffnotes for programming. This will be my last class at this university. The C++ teztbook I use(my own not for class) is Sam's C++ One hour a day. #include <iostream> #include<cstdlib> #include<cstring> using namespace std; struct MyTime { int hours, minutes, seconds; }; int DetermineElapsedTime(const MyTime *t1, const MyTime *t2); long t1, t2; int DetermineElapsedTime(const MyTime *t1, const MyTime *t2) { return((int)t2-t1); } int main(void) { char delim1, delim2; MyTime tm, tm2; cout << "Input two formats for the time. Separate each with a space. Ex: hr:min:sec\n"; cin >> tm.hours >> delim1 >> tm.minutes >> delim2 >> tm.seconds; cin >> tm2.hours >> delim1 >> tm2.minutes >> delim2 >> tm2.seconds; DetermineElapsedTime(tm, tm2); return 0; } I have to fix the errors first. Anyone have any ideas??

Read the article

How can I find a URL called [link] inside a block of HTML containing other URLs?

- by DrTwox

I'm writing a script to rewrite Reddit's RSS feeds. The script needs to find a URL named [link] inside a block of HTML that contains other URLs. The HTML is contained in an XML element called <description>. Here are two examples of the <description> element from I need to parse and the [link] I would need to get. First example: <description>submitted by <a href="http://www.reddit.com/user/wildlyinaccurate"> wildlyinaccurate </a> <br/> <a href="http://wildlyinaccurate.com/a-hackers-guide-to-git">[link]</a> <a href="http://www.reddit.com/r/programming/comments/26jvl7/a_hackers_guide_to_git/">[66 comments]</a></description> The [link] is: http://wildlyinaccurate.com/a-hackers-guide-to-git Second example: <description><div class="md"><p>I work a support role at a company where I primarily fix issues our customers our experiencing with our software, which is a browser based application written primarily in javascript. I&#39;ve been doing this for 2 years, but I want to take it to the next level (with the long term goal being that I become proficient enough to call myself a developer). I&#39;ve been reading &quot;Javascript The Definitive Guide&quot; by O&#39;Reilly but I was wondering if any of you more experienced users out there had some tips on taking it to the next level. Should I start incorporating some PHP and Jquery into my learning? Side projects on my spare time? Any good online resources? Etc. </p> <p>Thanks! </p> </div> submitted by <a href="http://www.reddit.com/user/56killa"> 56killa </a> <br/> <a href="http://www.reddit.com/r/javascript/comments/26nduc/i_want_to_become_more_experienced_with_javascript/">[link]</a> <a href="http://www.reddit.com/r/javascript/comments/26nduc/i_want_to_become_more_experienced_with_javascript/">[4 comments]</a></description> The [link] is: http://www.reddit.com/r/javascript/comments/26nduc/i_want_to_become_more_experienced_with_javascript/

Read the article

jQuery image loop not displaying any images

- by user1871097

I'm trying to create a very basic image gallery in jQuery. The goal is to have 3 images fade in and out in a sequential order. So image 1 is displayed, fades to image 2 etc. then the whole thing loops again. My HTML code so far is as follows: <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Slider</title> <style type="text/css"> .slider{ width: 2848px; height: 2136px; overflow: hidden; margin: 30px auto; } .slider img{ width:2848px; height:2136px; display:none; } </style> <script src="//ajax.googleapis.com/ajax/libs/jquery/1.8.3/jquery.min.js"></script> <script src="//ajax.googleapis.com/ajax/libs/jqueryui/1.9.2/jquery-ui.min.js"></script> <script src="Slider2.js"></script> </head> <body onload="Slider2"();> <div class="slider"> <img id="1" src="31.jpg" border="0" alt="city"/> <img id="2" src="2vrtigo2.jpg" border="0" alt="roof"/> <img id="3" src="3.jpg" border="0" alt="sea"/> </div> </body> And the jQuery code looks like this: function Slider2() { var total = $(".slider img").size(); for (i=1; i<=total; i+=1) { $(".slider #"+i).fadeIn(600); $(".slider #"+i).delay(2000).hide; }} A quick syntactical note, I've also tried using i++ in the last argument of the For Loop. The result of this code is a blank, white page. I know some of the HTML is being compiled because the enormous 2848x2136 div creates scroll bars on the browser. If anyone could help me out, that would be greatly appreciated. Obviously I'm relatively new to web programming and would love some insight into why this isn't working. Thanks!

Read the article

DisplayObject not being displayed in AS3

- by MarkSteve

I have this class: public class IskwabolText extends Sprite { private var _tf:TextField; private var _tfmt:TextFormat; private var _size:Number; private var _text:String; public function IskwabolText(params:Object) { var defaultParams:Object = { color: 0x000000, background: false, backgroundColor: 0xFFFFFF, width: 0, height: 0, multiline: false, wordWrap: false }; // textfield _tf = new TextField(); _tf.antiAliasType = 'advanced'; _tf.embedFonts = true; _tf.type = 'dynamic'; _tf.selectable = false; // textformat _tfmt = new TextFormat(); set(defaultParams); set(params); } public function get(param:String):Object { switch (param) { case 'size': return _tfmt.size; case 'text': return _tf.text; case 'font': return _tfmt.font; case 'color': return _tfmt.color; case 'background': return _tf.background; case 'backgroundColor': return _tf.backgroundColor; case 'width': return _tf.width; case 'height': return _tf.height; case 'multiline': return _tf.multiline; case 'wordWrap': return _tf.multiline; default: return this[param]; } return null; } public function set(params:Object):Object { for (var i:String in params) { setParam(i, params[i]); } redraw(); return this; } private function setParam(param:String, value:Object):Object { switch (param) { case 'size': _tfmt.size = new String(value); break; case 'text': _tf.text = new String(value); break; case 'font': _tfmt.font = new String(value); break; case 'color': _tfmt.color = new uint(value); break; case 'background': _tf.background = new Boolean(value); break; case 'backgroundColor': _tf.backgroundColor = new uint(value); break; case 'width': _tf.width = new Number(value); break; case 'height': _tf.height = new Number(value); break; case 'multiline': _tf.multiline = new Boolean(value); break; case 'wordWrap': _tf.multiline = new Boolean(value); break; default: this[param] = value; break; } return this; } private function redraw():void { _tf.setTextFormat(_tfmt); if (contains(_tf)) removeChild(_tf); if (_tf.width == 0) _tf.width= _tf.textWidth+5; _tf.height = _tf.textHeight; addChild(_tf); } } But when I do this: public class Main extends Sprite { public function Main() { addChild(new IskwabolText({ size: 100, text: 'iskwabol', font: 'Default', // this is properly embedded color: 0x000000, x: stage.stageWidth / 2 - this.width / 2, y: 140 })); } } The child IskwabolText doesn't get displayed. What happening?

Read the article

[C#] How to do a search from a list with non-prefix keywords

- by aNui

First of all, sorry if my english or my post got any mistakes. I am programming a program to search the name from the list and I need to find them if the keyword is not in front of the names (that's what I mean non-prefix) e.g. if I my list is the music instruments and I type "guit" to the search textbox. It should find the names "Guitar, Guitarrón, Acoustic Guitar, Bass Guitar, ..." or something like this Longdo Dictionary's search suggestion. here is my simple and stupid algorithm (that's all I can do) const int SEARCHROWLIMIT = 30; private string[] DoSearch(string Input, string[] ListToSearch) { List<string> FoundNames = new List<string>(); int max = 0; bool over = false; for (int k = 0; !over; k++) { foreach (string item in ListToSearch) { max = (max > item.Length) ? max : item.Length; if (k > item.Length) continue; if (k >= max) { over = true; break; } if (!Input.Equals("Search") && item.Substring(k, item.Length - k).StartsWith(Input, StringComparison.OrdinalIgnoreCase)) { bool exist = false; int i = 0; while (!exist && i < FoundNames.Count) { if (item.Equals(FoundNames[i])) { exist = true; break; } i++; } if (!exist && FoundNames.Count < SEARCHROWLIMIT) FoundNames.Add(item); else if (FoundNames.Count >= SEARCHROWLIMIT) over = true; } } } return FoundNames.ToArray(); } I think this algorithm is too slow for a large number of names and after several trial-and-error, I decided to add SEARCHROWLIMIT to breaks the operation And I also think there're some readymade methods that can do that. And another problem is I need to search music instruments by a category like strings, percussions, ... and by the country of origins. So I need to search them with filter by type and country. please help me. P.S. Me and my friends are just student from Thailand and developing the project to compete in Microsoft Imagine Cup 2010 and please become fan on our facebook page [KRATIB][3]. And we're so sorry we don't have much information in English but you can talk to us in English.

Read the article

how to create multiple tcp connections between server and client

- by lowcosthighperformance

I am new in Unix/Linux networking programming, so I have written server-client program in below.In this code there is one socket between client and server, client requests to server, then server responses from 1 to 100 numbers to client. So my question is how can we do this process with 3 socket( tcp connection) without using thread? ( e.g. First socket runs then second runs then third runs then first again .. ) Do you have any suggestion? Thank you client.c int main() { int sock; struct sockaddr_in sa; int ret; char buf[1024]; int x; sock = socket (AF_INET, SOCK_STREAM, 0); bzero (&sa, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_port = htons(SERVER_PORT); inet_pton (AF_INET, SERVER_IP, &sa.sin_addr); ret = connect (sock, (const struct sockaddr *) &sa,sizeof (sa)); if (ret != 0) { printf ("connect failed\n"); exit (0); } x = 0; while (x != -1) { read (sock, buf , sizeof(int)); x = ntohl(*((int *)buf)); if (x != -1) printf ("int rcvd = %d\n", x); } close (sock); exit (0); } server.c int main() { int list_sock; int conn_sock; struct sockaddr_in sa, ca; socklen_t ca_len; char buf[1024]; int i; char ipaddrstr[IPSTRLEN]; list_sock = socket (AF_INET, SOCK_STREAM, 0); bzero (&sa, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_addr.s_addr = htonl(INADDR_ANY); sa.sin_port = htons(SERVER_PORT); bind (list_sock,(struct sockaddr *) &sa,sizeof(sa)); listen (list_sock, 5); while (1){ bzero (&ca, sizeof(ca)); ca_len = sizeof(ca); // important to initialize conn_sock = accept (list_sock,(struct sockaddr *) &ca,&ca_len); printf ("connection from: ip=%s port=%d \n",inet_ntop(AF_INET, &(ca.sin_addr), ipaddrstr, IPSTRLEN),ntohs(ca.sin_port)); for (i=0; i<100; ++i){ *((int *)buf) = htonl(i+20); // we using converting to network byte order write (conn_sock, buf, sizeof(int)); } * ((int *)buf) = htonl(-1); write (conn_sock, buf, sizeof(int)); close (conn_sock); printf ("server closed connection to client\n"); } }

Read the article

jQuery getScript function with frames

- by user210099

Hello.. I'm a novice at Javascript/Jquery programming, so an apology if this is a simple/silly question. I am trying to use the jQuery .getScript() function to refresh part of an existing webpage. This webpage must be run on a local file system, and a large amount of the formatting is done using frames. Right now, there’s three main frames- a sidebar which displays possible “scopes” to choose from, a main frame which displays the majority of the contents of the webpage, and a footer frame. The main entry into the page is in an index.html file, which loads a sidebar.html, main.html, and footer.html file into each of the respective frames. In turn, the main.html has a number of javascript files which it loads, the main being a main.js, which contains numerous functions to format/process the contents for this main window. After loading this javascript file, main.html loads a few javascript files, which contain the data which is going to be displayed in the main frame. These files that are loaded have a fixed data structure, and are dependent on the functions that were loaded by the main.js file. Loading the webpage works fine now, but when a user tries to switch to another “scope”, the whole webpage is reloaded to make the switch. The only difference in the webpage is the content in the main.js frame, loaded in by a different set of .js files. Enough text, let’s look at some code. When the webpage loads, I tried to add a simple call to the getScript function in a .js file at the index.html level which handles switching scopes. This file, newFile, has different data definitions than the previously loaded oldFile.js which was loaded in the main.html file. $.getScript(/js/newFile.js); However this doesn’t work, since newFile.js depends on a parseData() function which is in main.js. If I open firebug up, parseData is not located in the dom tab, which I assume is related to some scoping issue with the main.html and main.js file existing in a different frame. I tried to do some targeting to the correct “frame” but I don’t think I understand jQuery enough to know what is happening. $(window.parent.frames[0]).getScript(/js/newFile.js); Any suggestions? If I were to type into firebug console “parseData” it can not find it: “ReferenceError: parseData is not defined” However, if I type in window.parent.frames[1].parseData, it can find the function. Sorry about all the rambling and poor understanding of javascript. Hopefully someone can provide some assistance! Thanks

Read the article

What language/framework (technology) to use for website (flash games portal)

- by cripox

Hello, I know there are a lot of similar questions on the net, but because I am a newbie in web development I didn't find the solution for my specific problem. I am planing on creating a flash games portal from scratch. It is a big chance that there will be big traffic from the beginning (millions of pageviews). I want to reduce the server costs as much as possible but in the same time to not be tide to an expensive contract as there is a chance that the project will not be as successfully as I want and in that case the money would be very little. The question is : what technology to use? I don't know any web dev technology yet so it doesn't matter what I will learn. My web dev experience is a little php 8 years ago, and from then I programmed in C++ / Java- game and mobile development. I like Java and C syntax and language very much and I tend to dislike dynamic typing or non robust scripting (like php)- but I can get along if these are the best choices. The candidates are now: - Grails (my best for now) Ruby on Rails Cake PHP Other technologies (Google App Engine, Python/Django etc...) I was considering at first using pure C and compiling the web app in the server- just to squeeze more from the servers, but soon I understand that this is overkill. Next my eyes came on Ruby - as there is a lot of buzz for it's easiness of use. Next I discovered Grails and looked at Java because it is said that it is "faster". But I don't know what this "Faster" really means on my needs, so here comes the first question: 1) What will be my biggest consumption on the server, other than bandwidth, for a lot of flash content requests? Is it memory? I heard that Java needs a lot of memory, but is faster. Is it CPU? I am planning to take some daily VPS.NET nodes at first, to see if there is a demand, and if the "spike" is permanent to move to a dedicated server (serverloft.com has some good offers), else to remain with less nodes. I was also considering developing in Google App Engine- cheap or free hosting to use at first - so I can test my assumption- and also very easy to use (no need for sys administration) but the costs became high if used more ( 3 million games played / month .. x mb/ each). And the issue with Google is that it looks me in this technology. My other concern is scalability (not only for traffic/users, but as adding functionality) My plans are to release a functional site in just 4 weeks (just the basics frontend and some quick basic backend - so I can be able to modify some things and add games manually) - but then to raise it and add more things to it. I am planning to take a little different approach than other portals so I need to write it from scratch (a script will not do). 2) Will Grails take much more resources than RoR or Php server wise? I heard that making it on Java stack will be hardware expensive and is overkill if you don't make a bank application. My application will not be very complex (I hope and i will try to) but will have a lot of traffic. I also took in account using CDN for files, but the cheapest CDN found was 5c/GB (vps.net) and the cost per gb on serverloft (http://www.serverloft.com/dedizierte-server/server-details.php?products=4) is only 1.79 cents/GB and comes with the other resources either. I am new to this domain (web). I am learning the ropes and searching on the web for ~half of year but don't have any really practical experience, so I know that I must have some naive thinking and other issues that i don't know from now, so please give me any advice you want regarding anything, not just the specific questions asked. And thank you so much for such great community!

Read the article

Type casting int into double C++

- by user1705380

I am new to programming and this might be an obvious question, though i cannot for life of me figure out why my program is not returning as a double. I am suppose to write a stocks program that takes in shares of stock, whole dollar portion of price and the fraction portion. And the fraction portion is to be inputted as two int values, and include a function definition with 3 int values.The function returns the price as a double. #include <iostream> using namespace std; int price(int, int, int); int main() { int dollars, numerator, denominator, price1, shares; char ans; do { cout<<"Enter the stock price and the number of shares.\n"; cout<<"Enter the price and integers: Dollars, numerator, denominator\n"; cin>>dollars>>numerator>>denominator; cout<<"Enter the number of shares held\n"; cin>>shares; cout<<shares; price1 = price(dollars,numerator,denominator); cout<<" shares of stock with market price of "; cout<< dollars << " " << numerator<<'/'<<denominator<<endl; cout<<"have a value of " << shares * price1<<endl; cout<<"Enter either Y/y to continue"; cin>>ans; }while (ans == 'Y' || ans == 'y'); system("pause"); return 0; } int price(int dollars, int numerator, int denominator) { return dollars + numerator/static_cast<double>(denominator); }

Read the article

Else without if

- by user2808951

I'm trying to write a code for my computer programming class for a project due Monday, and I'm pretty new to Java, but I'm trying to write a program that will first determine if a number the user inputs is even or odd and then determine if the number is prime or not. I'm not sure if I did the algorithm right or not, so if anyone has any corrections on the program to my algorithm or anything else please say so, but my real issue is that the program is refusing to compile. Every time I try, it says it's having an else without if problem. Here's a link to my command box: http://s1341.photobucket.com/user/Emi_Nightshade/media/Capture_zps45f9a2ea.png.html Here's my code: import java.io.*; import java.util.*; public class Lesson9p1_ThuotteEmily { public static void main(String args[]) { Scanner kbReader0=new Scanner(System.in); System.out.print("\n\nPlease enter an integer. An integer is whole number, and it can be either negative or positive. Please enter your number: "); long num=kbReader0.nextLong(); if(num%2==0) //if and else with braces { System.out.println("Your integer " + num + " is even."); } else { System.out.println("Your integer " + num + " is odd."); } Scanner kbReader1=new Scanner(System.in); System.out.print("\n\nWould you like to know if your number is prime? Please enter yes or no: "); String yn=kbReader1.nextLine(); if(yn.equals.IgnoreCase("Yes")) { System.out.println("Okay. Give me a moment."); { if(num%2==0) { System.out.println("Your number isn't prime."); } else if(num==2) { System.out.println("Your number is 2, which is the only even prime number in existence. Cool, right?"); } for(int i=3;i*i<=n;i+=2) { if(n%1==0) { System.out.println("Your number isn't prime."); } } else { System.out.println("Your number is prime!"); } } } if(yn.equals.IgnoreCase("No")) { System.out.println("Okay."); } } } If anyone could help me out with this and also any problems I may have made elsewhere in the program, I'd be very grateful! Thanks.

Read the article

Does this type of function or technique have a name?

- by DHR

HI there, I'm slightly new to programming, more of a hobby. I am wondering if a the following logic or technique has a specific name, or term. My current project has 7 check boxes, one for each day of the week. I needed an easy to save which boxes were checked. The following is the method to saved the checked boxes to a single number. Each checkbox gets a value that is double from the last check box. When I want to find out which boxes are checked, I work backwards, and see how many times I can divide the total value by the checkbox value. private int SetSelectedDays() { int selectedDays = 0; selectedDays += (dayMon.Checked) ? 1 : 0; selectedDays += (dayTue.Checked) ? 2 : 0; selectedDays += (dayWed.Checked) ? 4 : 0; selectedDays += (dayThu.Checked) ? 8 : 0; selectedDays += (dayFri.Checked) ? 16 : 0; selectedDays += (daySat.Checked) ? 32 : 0; selectedDays += (daySun.Checked) ? 64 : 0; return selectedDays; } private void SelectedDays(int n) { if ((n / 64 >= 1) & !(n / 64 >= 2)) { n -= 64; daySun.Checked = true; } if ((n / 32 >= 1) & !(n / 32 >= 2)) { n -= 32; daySat.Checked = true; } if ((n / 16 >= 1) & !(n / 16 >= 2)) { n -= 16; dayFri.Checked = true; } if ((n / 8 >= 1) & !(n / 8 >= 2)) { n -= 8; dayThu.Checked = true; } if ((n / 4 >= 1) & !(n / 4 >= 2)) { n -= 4; dayWed.Checked = true; } if ((n / 2 >= 1) & !(n / 2 >= 2)) { n -= 2; dayTue.Checked = true; } if ((n / 1 >= 1) & !(n / 1 >= 2)) { n -= 1; dayMon.Checked = true; } if (n > 0) { //log event } } The method works well for what I need it for, however, if you do see another way of doing this, or a better way to writing, I would be interested in your suggestions.

Read the article

How can I scale movement physics functions to frames per second (in a game engine)?

- by Richard

I am working on a game in Javascript (HTML5 Canvas). I implemented a simple algorithm that allows an object to follow another object with basic physics mixed in (a force vector to drive the object in the right direction, and the velocity stacks momentum, but is slowed by a constant drag force). At the moment, I set it up as a rectangle following the mouse (x, y) coordinates. Here's the code: // rectangle x, y position var x = 400; // starting x position var y = 250; // starting y position var FPS = 60; // frames per second of the screen // physics variables: var velX = 0; // initial velocity at 0 (not moving) var velY = 0; // not moving var drag = 0.92; // drag force reduces velocity by 8% per frame var force = 0.35; // overall force applied to move the rectangle var angle = 0; // angle in which to move // called every frame (at 60 frames per second): function update(){ // calculate distance between mouse and rectangle var dx = mouseX - x; var dy = mouseY - y; // calculate angle between mouse and rectangle var angle = Math.atan(dy/dx); if(dx < 0) angle += Math.PI; else if(dy < 0) angle += 2*Math.PI; // calculate the force (on or off, depending on user input) var curForce; if(keys[32]) // SPACE bar curForce = force; // if pressed, use 0.35 as force else curForce = 0; // otherwise, force is 0 // increment velocty by the force, and scaled by drag for x and y velX += curForce * Math.cos(angle); velX *= drag; velY += curForce * Math.sin(angle); velY *= drag; // update x and y by their velocities x += velX; y += velY; And that works fine at 60 frames per second. Now, the tricky part: my question is, if I change this to a different framerate (say, 30 FPS), how can I modify the force and drag values to keep the movement constant? That is, right now my rectangle (whose position is dictated by the x and y variables) moves at a maximum speed of about 4 pixels per second, and accelerates to its max speed in about 1 second. BUT, if I change the framerate, it moves slower (e.g. 30 FPS accelerates to only 2 pixels per frame). So, how can I create an equation that takes FPS (frames per second) as input, and spits out correct "drag" and "force" values that will behave the same way in real time? I know it's a heavy question, but perhaps somebody with game design experience, or knowledge of programming physics can help. Thank you for your efforts. jsFiddle: http://jsfiddle.net/BadDB

Read the article

Boost MultiIndex - objects or pointers (and how to use them?)?

- by Sarah

I'm programming an agent-based simulation and have decided that Boost's MultiIndex is probably the most efficient container for my agents. I'm not a professional programmer, and my background is very spotty. I've two questions: Is it better to have the container contain the agents (of class Host) themselves, or is it more efficient for the container to hold Host *? Hosts will sometimes be deleted from memory (that's my plan, anyway... need to read up on new and delete). Hosts' private variables will get updated occasionally, which I hope to do through the modify function in MultiIndex. There will be no other copies of Hosts in the simulation, i.e., they will not be used in any other containers. If I use pointers to Hosts, how do I set up the key extraction properly? My code below doesn't compile. // main.cpp - ATTEMPTED POINTER VERSION ... #include <boost/multi_index_container.hpp> #include <boost/multi_index/hashed_index.hpp> #include <boost/multi_index/member.hpp> #include <boost/multi_index/ordered_index.hpp> #include <boost/multi_index/mem_fun.hpp> #include <boost/tokenizer.hpp> typedef multi_index_container< Host *, indexed_by< // hash by Host::id hashed_unique< BOOST_MULTI_INDEX_MEM_FUN(Host,int,Host::getID) > // arg errors here > // end indexed_by > HostContainer; ... int main() { ... HostContainer testHosts; Host * newHostPtr; newHostPtr = new Host( t, DOB, idCtr, 0, currentEvents ); testHosts.insert( newHostPtr ); ... } I can't find a precisely analogous example in the Boost documentation, and my knowledge of C++ syntax is still very weak. The code does appear to work when I replace all the pointer references with the class objects themselves. As best I can read it, the Boost documentation (see summary table at bottom) implies I should be able to use member functions with pointer elements.

Read the article

NoSQL with MongoDB, NoRM and ASP.NET MVC

- by shiju

In this post, I will give an introduction to how to work on NoSQL and document database with MongoDB , NoRM and ASP.Net MVC 2. NoSQL and Document Database The NoSQL movement is getting big attention in this year and people are widely talking about document databases and NoSQL along with web application scalability. According to Wikipedia, "NoSQL is a movement promoting a loosely defined class of non-relational data stores that break with a long history of relational databases. These data stores may not require fixed table schemas, usually avoid join operations and typically scale horizontally. Academics and papers typically refer to these databases as structured storage". Document databases are schema free so that you can focus on the problem domain and don't have to worry about updating the schema when your domain is evolving. This enables truly a domain driven development. One key pain point of relational database is the synchronization of database schema with your domain entities when your domain is evolving.There are lots of NoSQL implementations are available and both CouchDB and MongoDB got my attention. While evaluating both CouchDB and MongoDB, I found that CouchDB can’t perform dynamic queries and later I picked MongoDB over CouchDB. There are many .Net drivers available for MongoDB document database. MongoDB MongoDB is an open source, scalable, high-performance, schema-free, document-oriented database written in the C++ programming language. It has been developed since October 2007 by 10gen. MongoDB stores your data as binary JSON (BSON) format . MongoDB has been getting a lot of attention and you can see the some of the list of production deployments from here - http://www.mongodb.org/display/DOCS/Production+Deployments NoRM – C# driver for MongoDB NoRM is a C# driver for MongoDB with LINQ support. NoRM project is available on Github at http://github.com/atheken/NoRM. Demo with ASP.NET MVC I will show a simple demo with MongoDB, NoRM and ASP.NET MVC. To work with MongoDB and NoRM, do the following steps Download the MongoDB databse For Windows 32 bit, download from http://downloads.mongodb.org/win32/mongodb-win32-i386-1.4.1.zip and for Windows 64 bit, download from http://downloads.mongodb.org/win32/mongodb-win32-x86_64-1.4.1.zip . The zip contains the mongod.exe for run the server and mongo.exe for the client Download the NorM driver for MongoDB at http://github.com/atheken/NoRM Create a directory call C:\data\db. This is the default location of MongoDB database. You can override the behavior. Run C:\Mongo\bin\mongod.exe. This will start the MongoDb server Now I am going to demonstrate how to program with MongoDb and NoRM in an ASP.NET MVC application.Let’s write a domain class public class Category { [MongoIdentifier]public ObjectId Id { get; set; } [Required(ErrorMessage = "Name Required")][StringLength(25, ErrorMessage = "Must be less than 25 characters")]public string Name { get; set;}public string Description { get; set; }} ObjectId is a NoRM type that represents a MongoDB ObjectId. NoRM will automatically update the Id becasue it is decorated by the MongoIdentifier attribute. The next step is to create a mongosession class. This will do the all interactions to the MongoDB. internal class MongoSession<TEntity> : IDisposable{ private readonly MongoQueryProvider provider; public MongoSession() { this.provider = new MongoQueryProvider("Expense"); } public IQueryable<TEntity> Queryable { get { return new MongoQuery<TEntity>(this.provider); } } public MongoQueryProvider Provider { get { return this.provider; } } public void Add<T>(T item) where T : class, new() { this.provider.DB.GetCollection<T>().Insert(item); } public void Dispose() { this.provider.Server.Dispose(); } public void Delete<T>(T item) where T : class, new() { this.provider.DB.GetCollection<T>().Delete(item); } public void Drop<T>() { this.provider.DB.DropCollection(typeof(T).Name); } public void Save<T>(T item) where T : class,new() { this.provider.DB.GetCollection<T>().Save(item); } } The MongoSession constrcutor will create an instance of MongoQueryProvider that supports the LINQ expression and also create a database with name "Expense". If database is exists, it will use existing database, otherwise it will create a new databse with name "Expense". The Save method can be used for both Insert and Update operations. If the object is new one, it will create a new record and otherwise it will update the document with given ObjectId. Let’s create ASP.NET MVC controller actions for CRUD operations for the domain class Category public class CategoryController : Controller{ //Index - Get the category listpublic ActionResult Index(){ using (var session = new MongoSession<Category>()) { var categories = session.Queryable.AsEnumerable<Category>(); return View(categories); }} //edit a single category[HttpGet]public ActionResult Edit(ObjectId id) { using (var session = new MongoSession<Category>()) { var category = session.Queryable .Where(c => c.Id == id) .FirstOrDefault(); return View("Save",category); } }// GET: /Category/Create[HttpGet]public ActionResult Create(){ var category = new Category(); return View("Save", category);}//insert or update a category[HttpPost]public ActionResult Save(Category category){ if (!ModelState.IsValid) { return View("Save", category); } using (var session = new MongoSession<Category>()) { session.Save(category); return RedirectToAction("Index"); } }//Delete category[HttpPost]public ActionResult Delete(ObjectId Id){ using (var session = new MongoSession<Category>()) { var category = session.Queryable .Where(c => c.Id == Id) .FirstOrDefault(); session.Delete(category); var categories = session.Queryable.AsEnumerable<Category>(); return PartialView("CategoryList", categories); } } } You can easily work on MongoDB with NoRM and can use with ASP.NET MVC applications. I have created a repository on CodePlex at http://mongomvc.codeplex.com and you can download the source code of the ASP.NET MVC application from here

Read the article

Visual Studio 2013 Static Code Analysis in depth: What? When and How?

- by Hosam Kamel

In this post I'll illustrate in details the following points What is static code analysis? When to use? Supported platforms Supported Visual Studio versions How to use Run Code Analysis Manually Run Code Analysis Automatically Run Code Analysis while check-in source code to TFS version control (TFSVC) Run Code Analysis as part of Team Build Understand the Code Analysis results & learn how to fix them Create your custom rule set Q & A References What is static Rule analysis? Static Code Analysis feature of Visual Studio performs static code analysis on code to help developers identify potential design, globalization, interoperability, performance, security, and a lot of other categories of potential problems according to Microsoft's rules that mainly targets best practices in writing code, and there is a large set of those rules included with Visual Studio grouped into different categorized targeting specific coding issues like security, design, Interoperability, globalizations and others. Static here means analyzing the source code without executing it and this type of analysis can be performed through automated tools (like Visual Studio 2013 Code Analysis Tool) or manually through Code Review which already supported in Visual Studio 2012 and 2013 (check Using Code Review to Improve Quality video on Channel9) There is also Dynamic analysis which performed on executing programs using software testing techniques such as Code Coverage for example. When to use? Running Code analysis tool at regular intervals during your development process can enhance the quality of your software, examines your code for a set of common defects and violations is always a good programming practice. Adding that Code analysis can also find defects in your code that are difficult to discover through testing allowing you to achieve first level quality gate for you application during development phase before you release it to the testing team. Supported platforms .NET Framework, native (C and C++) Database applications. Support Visual Studio versions All version of Visual Studio starting Visual Studio 2013 (except Visual Studio Test Professional) check Feature comparisons Create and modify a custom rule set required Visual Studio Premium or Ultimate. How to use? Code Analysis can be run manually at any time from within the Visual Studio IDE, or even setup to automatically run as part of a Team Build or check-in policy for Team Foundation Server. Run Code Analysis Manually To run code analysis manually on a project, on the Analyze menu, click Run Code Analysis on your project or simply right click on the project name on the Solution Explorer choose Run Code Analysis from the context menu Run Code Analysis Automatically To run code analysis each time that you build a project, you select Enable Code Analysis on Build on the project's Property Page Run Code Analysis while check-in source code to TFS version control (TFSVC) Team Foundation Version Control (TFVC) provides a way for organizations to enforce practices that lead to better code and more efficient group development through Check-in policies which are rules that are set at the team project level and enforced on developer computers before code is allowed to be checked in. (This is available only if you're using Team Foundation Server) Require permissions on Team Foundation Server: you must have the Edit project-level information permission set to Allow typically your account must be part of Project Administrators, Project Collection Administrators, for more information about Team Foundation permissions check http://msdn.microsoft.com/en-us/library/ms252587(v=vs.120).aspx In Team Explorer, right-click the team project name, point to Team Project Settings, and then click Source Control. In the Source Control dialog box, select the Check-in Policy tab. Click Add to create a new check-in policy. Double-click the existing Code Analysis item in the Policy Type list to change the policy. Check or Uncheck the policy option based on the configurations you need to perform as illustrated below: Enforce check-in to only contain files that are part of current solution: code analysis can run only on files specified in solution and project configuration files. This policy guarantees that all code that is part of a solution is analyzed. Enforce C/C++ Code Analysis (/analyze): Requires that all C or C++ projects be built with the /analyze compiler option to run code analysis before they can be checked in. Enforce Code Analysis for Managed Code: Requires that all managed projects run code analysis and build before they can be checked in. Check Code analysis rule set reference on MSDN What is Rule Set? Rule Set is a group of code analysis rules like the example below where Microsoft.Design is the rule set name where "Do not declare static members on generic types" is the code analysis rule Once you configured the Analysis rule the policy will be enabled for all the team member in this project whenever a team member check-in any source code to the TFSVC the policy section will highlight the Code Analysis policy as below TFS is a very extensible platform so you can simply implement your own custom Code Analysis Check-in policy, check this link for more details http://msdn.microsoft.com/en-us/library/dd492668.aspx but you have to be aware also about compatibility between different TFS versions check http://msdn.microsoft.com/en-us/library/bb907157.aspx Run Code Analysis as part of Team Build With Team Foundation Build (TFBuild), you can create and manage build processes that automatically compile and test your applications, and perform other important functions. Code Analysis can be enabled in the Build Definition file by selecting the correct value for the build process parameter "Perform Code Analysis" Once configure, Kick-off your build definition to queue a new build, Code Analysis will run as part of build workflow and you will be able to see code analysis warning as part of build report Understand the Code Analysis results & learn how to fix them Now after you went through Code Analysis configurations and the different ways of running it, we will go through the Code Analysis result how to understand them and how to resolve them. Code Analysis window in Visual Studio will show all the analysis results based on the rule sets you configured in the project file properties, let's dig deep into what each result item contains: 1 Check ID The unique identifier for the rule. CheckId and Category are used for in-source suppression of a warning. 2 Title The title of warning message 3 Description A description of the problem or suggested fix 4 File Name File name and the line of code number which violate the code analysis rule set 5 Category The code analysis category for this error 6 Warning /Error Depend on how you configure it in the rule set the default is Warning level 7 Action Copy: copy the warning information to the clipboard Create Work Item: If you're connected to Team Foundation Server you can create a work item most probably you may create a Task or Bug and assign it for a developer to fix certain code analysis warning Suppress Message: There are times when you might decide not to fix a code analysis warning. You might decide that resolving the warning requires too much recoding in relation to the probability that the issue will arise in any real-world implementation of your code. Or you might believe that the analysis that is used in the warning is inappropriate for the particular context. You can suppress individual warnings so that they no longer appear in the Code Analysis window. Two options available: In Source inserts a SuppressMessage attribute in the source file above the method that generated the warning. This makes the suppression more discoverable. In Suppression File adds a SuppressMessage attribute to the GlobalSuppressions.cs file of the project. This can make the management of suppressions easier. Note that the SuppressMessage attribute added to GlobalSuppression.cs also targets the method that generated the warning. It does not suppress the warning globally. Visual Studio makes it very easy to fix Code analysis warning, all you have to do is clicking on the Check Id hyperlink if you are not aware how to fix the warring and you'll be directed to MSDN online or local copy based on the configuration you did while installing Visual Studio and you will find all the information about the warring including how to fix it. Create a Custom Code Analysis Rule Set The Microsoft standard rule sets provide groups of rules that are organized by function and depth. For example, the Microsoft Basic Design Guidelines Rules and the Microsoft Extended Design Guidelines Rules contain rules that focus on usability and maintainability issues, with added emphasis on naming rules in the Extended rule set, you can create and modify a custom rule set to meet specific project needs associated with code analysis. To create a custom rule set, you open one or more standard rule sets in the rule set editor. Create and modify a custom rule set required Visual Studio Premium or Ultimate. You can check How to: Create a Custom Rule Set on MSDN for more details http://msdn.microsoft.com/en-us/library/dd264974.aspx Q & A Visual Studio static code analysis vs. FxCop vs. StyleCpp http://www.excella.com/blog/stylecop-vs-fxcop-difference-between-code-analysis-tools/ Code Analysis for SharePoint Apps and SPDisposeCheck? This post lists some of the rule set you can run specifically for SharePoint applications and how to integrate SPDisposeCheck as well. Code Analysis for SQL Server Database Projects? This post illustrate how to run static code analysis on T-SQL through SSDT ReSharper 8 vs. Visual Studio 2013? This document lists some of the features that are provided by ReSharper 8 but are missing or not as fully implemented in Visual Studio 2013. References A Few Billion Lines of Code Later: Using Static Analysis to Find Bugs in the Real World http://cacm.acm.org/magazines/2010/2/69354-a-few-billion-lines-of-code-later/fulltext What is New in Code Analysis for Visual Studio 2013 http://blogs.msdn.com/b/visualstudioalm/archive/2013/07/03/what-is-new-in-code-analysis-for-visual-studio-2013.aspx Analyze the code quality of Windows Store apps using Visual Studio static code analysis http://msdn.microsoft.com/en-us/library/windows/apps/hh441471.aspx [Hands-on-lab] Using Code Analysis with Visual Studio 2012 to Improve Code Quality http://download.microsoft.com/download/A/9/2/A9253B14-5F23-4BC8-9C7E-F5199DB5F831/Using%20Code%20Analysis%20with%20Visual%20Studio%202012%20to%20Improve%20Code%20Quality.docx Originally posted at "Hosam Kamel| Developer & Platform Evangelist" http://blogs.msdn.com/hkamel

Read the article

Mauritius Software Craftsmanship Community

There we go! I finally managed to push myself forward and pick up an old, actually too old, idea since I ever arrived here in Mauritius more than six years ago. I'm talking about a community for all kind of ICT connected people. In the past (back in Germany), I used to be involved in various community activities. For example, I was part of the Microsoft Community Leader/Influencer Program (CLIP) in Germany due to an FAQ on Visual FoxPro, actually Active FoxPro Pages (AFP) to be more precise. Then in 2003/2004 I addressed the responsible person of the dFPUG user group in Speyer in order to assist him in organising monthly user group meetings. Well, he handed over management completely, and attended our meetings regularly. Why did it take you so long? Well, I don't want to bother you with the details but short version is that I was too busy on either job (building up new companies) or private life (got married and we have two lovely children, eh 'monsters') or even both. But now is the time where I was starting to look for new fields given the fact that I gained some spare time. My businesses are up and running, the kids are in school, and I am finally in a position where I can commit myself again to community activities. And I love to do that! Why a new user group? Good question... And 'easy' to answer. Since back in 2007 I did my usual research, eh Google searches, to see whether there existing user groups in Mauritius and in which field of interest. And yes, there are! If I recall this correctly, then there are communities for PHP, Drupal, Python (just recently), Oracle, and Linux (which used to be even two). But... either they do not exist anymore, they are dormant, or there is only a low heart-beat, frankly speaking. And yes, I went to meetings of the Linux User Group Meta (Mauritius) back in 2010/2011 and just recently. I really like the setup and the way the LUGM is organised. It's just that I have a slightly different point of view on how a user group or community should organise itself and how to approach future members. Don't get me wrong, I'm not criticizing others doing a very good job, I'm only saying that I'd like to do it differently. The last meeting of the LUGM was awesome; read my feedback about it. Ok, so what's up with 'Mauritius Software Craftsmanship Community' or short: MSCC? As I've already written in my article on 'Communities - The importance of exchange and discussion' I think it is essential in a world of IT to stay 'connected' with a good number of other people in the same field. There is so much dynamic and every day's news that it is almost impossible to keep on track with all of them. The MSCC is going to provide a common platform to exchange experience and share knowledge between each other. You might be a newbie and want to know what to expect working as a software developer, or as a database administrator, or maybe as an IT systems administrator, or you're an experienced geek that loves to share your ideas or solutions that you implemented to solve a specific problem, or you're the business (or HR) guy that is looking for 'fresh' blood to enforce your existing team. Or... you're just interested and you'd like to communicate with like-minded people. Meetup of 26.06.2013 @ L'arabica: Of course there are laptops around. Free WiFi, power outlet, coffee, code and Linux in one go. The MSCC is technology-agnostic and spans an umbrella over any kind of technology. Simply because you can't ignore other technologies anymore in a connected IT world as we have. A front-end developer for iOS applications should have the chance to connect with a Python back-end coder and eventually with a DBA for MySQL or PostgreSQL and exchange their experience. Furthermore, I'm a huge fan of cross-platform development, and it is very pleasant to have pure Web developers - with all that HTML5, CSS3, JavaScript and JS libraries stuff - and passionate C# or Java coders at the same table. This diversity of knowledge can assist and boost your personal situation. And last but not least, there are projects and open positions 'flying' around... People might like to hear others opinion about an employer or get new impulses on how to tackle down an issue at their workspace, etc. This is about community. And that's how I see the MSCC in general - free of any limitations be it by programming language or technology. Having the chance to exchange experience and to discuss certain aspects of technology saves you time and money, and it's a pleasure to enjoy. Compared to dusty books and remote online resources. It's human! Organising meetups (meetings, get-together, gatherings - you name it!) As of writing this article, the MSCC is currently meeting every Wednesday for the weekly 'Code & Coffee' session at various locations (suggestions are welcome!) in Mauritius. This might change in the future eventually but especially at the beginning I think it is very important to create awareness in the Mauritian IT world. Yes, we are here! Come and join us! ;-) The MSCC's main online presence is located at Meetup.com because it allows me to handle the organisation of events and meeting appointments very easily, and any member can have a look who else is involved so that an exchange of contacts is given at any time. In combination with the other entities (G+ Communities, FB Pages or in Groups) I advertise and manage all future activities here: Mauritius Software Craftsmanship Community This is a community for those who care and are proud of what they do. For those developers, regardless how experienced they are, who want to improve and master their craft. This is a community for those who believe that being average is just not good enough. I know, there are not many 'craftsmen' yet but it's a start... Let's see how it looks like by the end of the year. There are free smartphone apps for Android and iOS from Meetup.com that allow you to keep track of meetings and to stay informed on latest updates. And last but not least, there is a Trello workspace to collect and share ideas and provide downloads of slides, etc. Trello is also available as free smartphone app. Sharing is caring! As mentioned, the #MSCC is present in various social media networks in order to cover as many people as possible here in Mauritius. Following is an overview of the current networks: Twitter - Latest updates and quickies Google+ - Community channel Facebook - Community Page LinkedIn - Community Group Trello - Collaboration workspace to share and develop ideas Hopefully, this covers the majority of computer-related people in Mauritius. Please spread the word about the #MSCC between your colleagues, your friends and other interested 'geeks'. Your future looks bright Running and participating in a user group or any kind of community usually provides quite a number of advantages for anyone. On the one side it is very joyful for me to organise appointments and get in touch with people that might be interested to present a little demo of their projects or their recent problems they had to tackle down, and on the other side there are lots of companies that have various support programs or sponsorships especially tailored for user groups. At the moment, I already have a couple of gimmicks that I would like to hand out in small contests or raffles during one of the upcoming meetings, and as said, companies provide all kind of goodies, books free of charge, or sometimes even licenses for communities. Meeting other software developers or IT guys also opens up your point of view on the local market and there might be interesting projects or job offers available, too. A community like the Mauritius Software Craftsmanship Community is great for freelancers, self-employed, students and of course employees. Meetings will be organised on a regular basis, and I'm open to all kind of suggestions from you. Please leave a comment here in blog or join the conversations in the above mentioned social networks. Let's get this community up and running, my fellow Mauritians! Recent updates The MSCC is now officially participating in the O'Reilly UK User Group programm and we are allowed to request review or recension copies of recent titles. Additionally, we have a discount code for any books or ebooks that you might like to order on shop.oreilly.com. More applications for user group sponsorship programms are pending and I'm looking forward to a couple of announcement very soon. And... we need some kind of 'corporate identity' - Over at the MSCC website there is a call for action (or better said a contest with prizes) to create a unique design for the MSCC. This would include a decent colour palette, a logo, graphical banners for Meetup, Google+, Facebook, LinkedIn, etc. and of course badges for our craftsmen to add to their personal blogs and websites. Please spread the word and contribute. Thanks!

Read the article

Silverlight 4 Training Kit

- by ScottGu

We recently released a new free Silverlight 4 Training Kit that walks you through building business applications with Silverlight 4. You can browse the training kit online or alternatively download an entire offline version of the training kit. The training material is structured on teaching how to use the new Silverlight 4 features to build an end to end business application. The training kit includes 8 modules, 25 videos, and several hands on labs. Below is a breakdown and links to all of the content. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Module 1: Introduction Click here to watch this module. In this video John Papa and Ian Griffiths discuss the key areas that the Building Business Applications with Silverlight 4 course focuses on. This module is the overview of the course and covers many key scenarios that are faced when building business applications, and how Silverlight can help address them. Module 2: WCF RIA Services Click here to explore this module. In this lab, you will create a web site for managing conferences that will be the basis for the other labs in this course. Don’t worry if you don’t complete a particular lab in the series – all lab manual instructions are accompanied by completed solutions, so you can either build your own solution from start to finish, or dive straight in at any point using the solutions provided as a starting point. In this lab you will learn how to set up WCF RIA Services, create bindings to the domain context, filter using the domain data source, and create domain service queries. Online Link Download Source Download Lab Document Videos Module 2.1 - WCF RIA Services Ian Griffiths sets up the Entity Framework and WCF RIA Services for the sample Event Manager application for the course. He covers how to set up the services, how the Domain Services work and the role that the DomainContext plays in the sample application. He also reviews the metadata classes and integrating the navigation framework. Module 2.2 – Using WCF RIA Services to Edit Entities Ian Griffiths discusses how he adds the ability to edit and create individual entities with the features built into WCF RIA Services into the sample Event Manager application. He covers data binding fundamentals, IQueryable, LINQ, the DomainDataSource, navigation to a single entity using the navigation framework, and how to use the Visual Studio designer to do much of the work . Module 2.3 – Showing Master/Details Records Using WCF RIA Services Ian Griffiths reviews how to display master/detail records for the sample Event Manager application using WCF RIA Services. He covers how to use the Include attribute to indicate which elements to serialize back to the client. Ian also demonstrates how to use the Data Sources window in the designer to add and bind controls to specific data elements. He wraps up by showing how to create custom services to the Domain Services. Module 3 – Authentication, Validation, MVVM, Commands, Implicit Styles and RichTextBox Click here to visit this module. This lab demonstrates how to build a login screen, integrate ASP.NET authentication, and perform validation on data elements. Model-View-ViewModel (MVVM) is introduced and used in this lab as a pattern to help separate the UI and business logic. You will also learn how to use implicit styling and the new RichTextBox control. Online Link Download Source Download Lab Document Videos Module 3.1 – Authentication Ian Griffiths covers how to integrate a login screen and authentication into the sample Event Manager application. Ian shows how to use the ASP.NET authentication and integrate it into WCF RIA Services and the Silverlight presentation layer. Module 3.2 – MVVM Ian Griffiths covers how to Model-View-ViewModel (MVVM) patterns into the sample Event Manager application. He discusses why MVVM exists, what separated presentation means, and why it is important. He shows how to connect the View to the ViewModel, why data binding is important in this symbiosis, and how everything fits together in the overall application. Module 3.3 –Validation Ian Griffiths discusses how validation of user input can be integrated into the sample Event Manager application. He demonstrates how to use the DataAnnotations, the INotifyDataErrorInfo interface, binding markup extensions, and WCF RIA Services in concert to achieve great validation in the sample application. He discusses how this technique allows for property level validation, entity level validation, and asynchronous server side validation. Module 3.4 – Implicit Styles Ian Griffiths discusses how why implicit styles are important and how they can be integrated into the sample Event Manager application. He shows how implicit styles defined in a resource dictionary can be applied to all elements of a particular kind throughout the application. Module 3.5 – RichTextBox Ian Griffiths discusses how the new RichTextBox control and it can be integrated into the sample Event Manager application. He demonstrates how the RichTextBox can provide editing for the event information and how it can display the rich text for selection and copying. Module 4 – User Profiles, Drop Targets, Webcam and Clipboard Click here to visit this module. This lab builds new features into the sample application to take the user's photo. It teaches you how to use the webcam to capture an image, use Silverlight as a drop target, and take advantage of programmatic access to the clipboard. Link Download Source Download Lab Document Videos Module 4.1 – Webcam Ian Griffiths demonstrates how the webcam adds value to the sample Event Manager application by capturing an image of the attendee. He discusses the VideoCaptureDevice, the CaptureDviceConfiguration, and the CaptureSource classes and how they allow audio and video to be captured so you can grab an image from the capture device and save it. Module 4.2 - Drag and Drop in Silverlight Ian Griffiths demonstrates how to capture and handle the Drop in the sample Event Manager application so the user can drag a photo from a file and drop it into the application. Ian reviews the AllowDrop property, the Drop event, how to access the file that can be dropped, and the other drag related events. He also reviews how to make this work across browsers and the challenges for this. Module 5 – Schedule Planner and Right Mouse Click Click here to visit this module. This lab builds on the application to allow grouping in the DataGrid and implement right mouse click features to add context menu support. Link Download Source Download Lab Document Videos Module 5.1 – Grouping and Binding Ian Griffiths demonstrates how to use the grouping features for data binding in the DataGrid and how it applies to the sample Event Manager application. He reviews the role of the CollectionViewSource in grouping, customizing the templates for headers, and how to work with grouping with ItemsControls. Module 5.2 – Layout Visual States Ian Griffiths demonstrates how to use the Fluid UI animation support for visual states in the ListBox control DataGrid and how it applies to the sample Event Manager application. He reviews the 3 visual states of BeforeLoaded, AfterLoaded, and BeforeUnloaded. Module 5.3 – Right Mouse Click Ian Griffiths demonstrates how to add support for handling the right mouse button click event to display a context menu for the Event Manager application. He demonstrates how to handle the event, show a custom context menu control, and integrate it into the scheduling portion of the application. Module 6 – Printing the Schedule Click here to visit this module. This lab teaches how to use the new printing features in Silverlight 4. The lab walks through the PrintDocument class and the ViewBox control, while showing how to print multiple pages of content using them. Link Download Source Download Lab Document Videos Module 6.1 – Printing and the Viewbox Ian Griffiths demonstrates how to add the ability to print the schedule to the sample Event Manager application. He walks through the importance of the PrintDocument class and its members. He also shows how to handle printing the visual tree and how the ViewBox control can help. Module 6.2 – Multi Page Printing Ian Griffiths expands on his printing discussion by showing how to handle printing multiple pages of content for the sample Event Manager application. He shows how to paginate the content and points out various tips to keep in mind when determining the printable area. Module 7 – Running the Event Dashboard Out of Browser Click here to visit this module. This lab builds a dashboard for the sample application while explaining the fundamentals of the out of browser features, how to handle authentication, displaying notifications (toasts), and how to use native integration to use COM Interop with Silverlight. Link Download Source Download Lab Document Videos Module 7.1 – Out of Browser Ian Griffiths discusses the role of an Out of Browser application for administrators to manage the events and users in the sample Event Manager application. He discusses several reasons why out of browser applications may better suit your needs including custom chrome, toasts, window placement, cross domain access, and file access. He demonstrates the basic technique to take your application and make it work out of browser using the tools. Module 7.2 – NotificationWindow (Toasts) for Elevated Trust Out of Browser Applications Ian Griffiths discusses the how toasts can be used in the sample Event Manager application to show information that may require the user's attention. Ian covers how to create a toast using the NotificationWindow, security implications, and how to make the toast appear as needed. Module 7.3 – Out of Browser Window Placement Ian Griffiths discusses the how to manage the window positioning when building an out of browser application, handling the windows state, and controlling and handling activation of the window. Module 7.4 – Out of Browser Elevated Trust Application Overview Ian Griffiths discusses the implications of creating trusted out of browser application for the Event Manager sample application. He reviews why you might want to use elevated trust, what features is opens to you, and how to take advantage of them. Topics Ian covers include the dynamic keyword in C# 4, the AutomationFactory class, the API to check if you are in a trusted application, and communicating with Excel. Module 8 – Advanced Out of Browser and MEF Click here to visit this module. This hands-on lab walks through the creation of a trusted out of browser application and the new functionality that comes with that. You will learn to use COM Automation, handle the window closing event, set custom window chrome, digitally sign your Silverlight out of browser trusted application, create a silent install option, and take advantage of MEF. Link Download Source Download Lab Document Videos Module 8.1 – Custom Window Chrome for Elevated Trust Out of Browser Applications Ian Griffiths discusses how to replace the standard operating system window chrome with customized chrome for an elevated trusted out of browser application. He covers how it is important to handle close, resize, minimize, and maximize events. Ian mentions that the tooling was not ready when he shot this video, but the good news is that the tooling now supports setting the custom chrome directly from the property page for the Silverlight application. Module 8.2 – Window Closing Event for Out of Browser Applications Ian Griffiths discusses the WindowClosing event and how to handle and optionally cancel the event. Module 8.3 – Silent Install of Out of Browser Applications Ian Griffiths discusses how to use the SLLauncher executable to install an out of browser application. He discusses the optional command line switches that can be set including how the emulate switch can help you emulate the install process. Ian also shows how to setup a shortcut for the application and tell the application where it should look for future updates online. Module 8.4 – Digitally Signing Out of Browser Application Ian Griffiths discusses how and why to digitally sign an out of browser application using the signtool program. He covers what trusted certificates are, the implications of signing (or not signing), and the effect on the user experience. Module 8.5 – The Value of MEF with Silverlight Ian Griffiths discusses what MEF is, how your application can benefit from it, and the fundamental features it puts at your disposal. He covers the 3 step import, export and compose process as well as how to dynamically import XAP files using MEF. Summary As you can probably tell from the long list above – this series contains a ton of great content, and hopefully provides a nice end-to-end walkthrough that helps explain how to take advantage of Silverlight 4 (and all its new features). Hope this helps, Scott

Search Results

Search found 18933 results on 758 pages for 'dynamic programming'.

Page 729/758 | < Previous Page | 725 726 727 728 729 730 731 732 733 734 735 736 | Next Page >

- by user334898

- by Dr Dork

- by truncheon

- by Dr Dork

- by ruhig brauner

- by user68759

- by JimZ

- by Noah Cagle

- by user1781382

- by DrTwox

- by user1871097

- by MarkSteve

- by aNui

- by lowcosthighperformance

- by user210099

- by cripox

- by user1705380

- by user2808951

- by DHR

- by Richard

- by Sarah

- by shiju

- by Hosam Kamel

- by ScottGu

< Previous Page | 725 726 727 728 729 730 731 732 733 734 735 736 | Next Page >