Search Results

Search found 19928 results on 798 pages for 'multiple constructors'.

Page 729/798 | < Previous Page | 725 726 727 728 729 730 731 732 733 734 735 736  | Next Page >

• Making user input/math on data fast, unlike excel type programs

  - by proGrammar

  I'm creating a research platform solely for myself to do some research on data. Programs like excel are terribly slow for me so I'm trying to come up with another solution. Originally I used excel. A1 was the cell that contained the data and all other cells in use calculated something on A1, or on other cells, that all could be in the end traced to A1. A1 was like an element of an array, I then I incremented it to go through all my data. This was way too slow. So the only other option I found originally was to hand code in c# the calculations inside a loop. Then I simply recompiled each time I changed my math. This was terribly slow to do and I had to order everything correctly so things would update correctly (dependencies). I could have also used events, but hand coding events for each cell like calculation would also be very slow. Next I created an application to read Excel and to perfectly imitate it. Which is what I now use. Basically I write formulas onto a fraction of my data to get live results inside excel. Then my program reads excel, writes another c# program, compiles it, and runs that program which runs my excel created formulas through a lot more data a whole lot faster. The advantage being my application dependency sorts everything (or I could use events) so I don't have to (like excel does) And of course the speed. But now its not a single application anymore. Instead its 2 applications, one which only reads my formulas and writes another program. The other one being the result which only lives for a short while before I do other runs through my data with different formulas / settings. So I can't see multiple results at one time without introducing even more programs like a database or at least having the 2 applications talking to each other. My idea was to have a dll that would be written, compiled, loaded, and unloaded again and again. So a self-updating program, sort of. But apparently that's not possible without another appdomain which means data has to be marshaled to be moved between the appdomains. Which would slow things down, not for summaries, but for other stuff I need to do with all my data. I'm also forgetting to mention a huge problem with restarting an application again and again which is having to reload ALL my data into memory again and again. But its still a whole lot faster than excel. I'm really super puzzled as to what people do when they want to research data fast. I'm completely unable to have a program accept user input and having it fast. My understanding is that it would have to do things like excel which is to evaluate strings again and again. So my only option is to repeatedly compile applications. Do I have a correct understanding on computer science? I've only just began programming, and didn't think I would have to learn much to do some simple math on data. My understanding is its either compiling my user defined stuff to a program or evaluating them from a string or something stupid again and again. And my only option is to probably switch operating systems or something to be able to have a program compile and run itself without stopping (writing/compiling dll, loading dll to program, unloading, and repeating). Can someone give me some idea on how computers work? Is anything better possible? Like a running program, that can accept user input and compile it and then unload it later? I mean heck operating systems dont need to be RESTARTED with every change to user input. What is this the cave man days? Sorry, it's just so super frustrating not knowing what one can do, and can't do. If only I could understand and learn this stuff fast enough.

  Read the article

• Webcast On-Demand: Building Java EE Apps That Scale

  - by jeckels

  With some awesome work by one of our architects, Randy Stafford, we recently completed a webcast on scaling Java EE apps efficiently. Did you miss it? No problem. We have a replay available on-demand for you. Just hit the '+' sign drop-down for access.Topics include: Domain object caching Service response caching Session state caching JSR-107 HotCache and more! Further, we had several interesting questions asked by our audience, and we thought we'd share a sampling of those here for you - just in case you had the same queries yourself. Enjoy! What is the largest Coherence deployment out there? We have seen deployments with over 500 JVMs in the Coherence cluster, and deployments with over 1000 JVMs using the Coherence jar file, in one system. On the management side there is an ecosystem of monitoring tools from Oracle and third parties with dashboards graphing values from Coherence's JMX instrumentation. For lifecycle management we have seen a lot of custom scripting over the years, but we've also integrated closely with WebLogic to leverage its management ecosystem for deploying Coherence-based applications and managing process life cycles. That integration introduces a new Java EE archive type, the Grid Archive or GAR, which embeds in an EAR and can be seen by a WAR in WebLogic. That integration also doesn't require any extra WebLogic licensing if Coherence is licensed. How is Coherence different from a NoSQL Database like MongoDB? Coherence can be considered a NoSQL technology. It pre-dates the NoSQL movement, having been first released in 2001 whereas the term "NoSQL" was coined in 2009. Coherence has a key-value data model primarily but can also be used for document data models. Coherence manages data in memory currently, though disk persistence is in a future release currently in beta testing. Where the data is managed yields a few differences from the most well-known NoSQL products: access latency is faster with Coherence, though well-known NoSQL databases can manage more data. Coherence also has features that well-known NoSQL database lack, such as grid computing, eventing, and data source integration. Finally Coherence has had 15 years of maturation and hardening from usage in mission-critical systems across a variety of industries, particularly financial services. Can I use Coherence for local caching? Yes, you get additional features beyond just a java.util.Map: you get expiration capabilities, size-limitation capabilities, eventing capabilites, etc. Are there APIs available for GoldenGate HotCache? It's mostly a black box. You configure it, and it just puts objects into your caches. However you can treat it as a glass box, and use Coherence event interceptors to enhance its behavior - and there are use cases for that. Are Coherence caches updated transactionally? Coherence provides several mechanisms for concurrency control. If a project insists on full-blown JTA / XA distributed transactions, Coherence caches can participate as resources. But nobody does that because it's a performance and scalability anti-pattern. At finer granularity, Coherence guarantees strict ordering of all operations (reads and writes) against a single cache key if the operations are done using Coherence's "EntryProcessor" feature. And Coherence has a unique feature called "partition-level transactions" which guarantees atomic writes of multiple cache entries (even in different caches) without requiring JTA / XA distributed transaction semantics.

  Read the article

• How to be Agile when new work keeps affecting completed work?

  - by jdln

  The project I'm working on is to re-skin an existing website. The functionally will stay the same, its just the styles that are changing. The HTML is not changing, I'm only modifying the CSS files. The site is pretty complex. There are dozens of pages. Users can be logged in and have a number of different roles. Depending on their role the content of the page and what pages they are allowed to see varys. We're using GIT and Github. I'm trying to write CSS that works as components. So when the same form elements, headings, etc appear on multiple pages they are already styled and are consistent. Most of time this is working well. Sadly the format and class names in the HTML are at times messy and unpredictable. When I fix something on one page it can break another. The job is also harder as no one knows exactly all the variations that are possible due to the user roles. As such I'm continuously finding new variations as I go along. I'm making headway by putting a lot of comments in my CSS. If I need to remove a CSS rule Ill comment it out so I can still see it with the chrome dev tools, and ill put a comment in the CSS saying why I removed it and for what page this was done. This means that if on another page I'm about to add add the rule to fix a different problem, there is more of a chance I will see how this would break the first page. This allows me to either find a different solution that will work for both pages, or I can make the override page specific. This has been working quite well for me. If I had complete free reign and the only deadline was to finish the project by the end then this method would be fine. However my manager is trying to mitigate risk by breaking the work into areas to be completed per sprint. This is counter to how I have been approaching things as something like my typography styles will affect all other pages on the site. The other issue is that the different stakeholders want to sign off each section as I go along. However once I've finished a section it may change if I change CSS that affects it and also affects a new section I'm working on. I've asked that the stakeholders have a quick unofficial sign off in stages (eg per sprint), and have the final official sign off at the end of the project, but this is being met with resistance. I do understand why it would be higher risk to do this, but the only way to guarantee that a signed off section will not change is to make ALL future changes page specific. In addition to this I'm being told that all work that I push to the Git repo should be ready to go live, and as such should not contain any code comments. This is risky for me as I wont know until I've finished the site if I will ever benefit from these comments or not. Has anyone else been in a similar situation and managed to find a compromise that worked for my development approach and also the desires of management and stakeholders to have a more Agile approach? A more Agile workflow works great when you can break the work into components and know that once something is done it wont be affected by future work. However the nature of this project makes this hard to achieve.

  Read the article

• Is there any kind of established architecture for browser based games?

  - by black_puppydog

  I am beginning the development of a broser based game in which players take certain actions at any point in time. Big parts of gameplay will be happening in real life and just have to be entered into the system. I believe a good kind of comparison might be a platform for managing fantasy football, although I have virtually no experience playing that, so please correct me if I am mistaken here. The point is that some events happen in the program (i.e. on the server, out of reach for the players) like pulling new results from some datasource, starting of a new round by a game master and such. Other events happen in real life (two players closing a deal on the transfer of some team member or whatnot - again: have never played fantasy football) and have to be entered into the system. The first part is pretty easy since the game masters will be "staff" and thus can be trusted to a certain degree to not mess with the system. But the second part bothers me quite a lot, especially since the actions may involve multiple steps and interactions with different players, like registering a deal with the system that then has to be approved by the other party or denied and passed on to a game master to decide. I would of course like to separate the game logic as far as possible from the presentation and basic form validation but am unsure how to do this in a clean fashion. Of course I could (and will) put some effort into making my own architectural decisions and prototype different ideas. But I am bound to make some stupid mistakes at some point, so I would like to avoid some of that by getting a little "book smart" beforehand. So the question is: Is there any kind of architectural works that I can read up on? Papers, blogs, maybe design documents or even source code? Writing this down this seems more like a business application with business rules, workflows and such... Any good entry points for that? EDIT: After reading the first answers I am under the impression of having made a mistake when including the "MMO" part into the title. The game will not be all fancy (i.e. 3D or such) on the client side and the logic will completely exist on the server. That is, apart from basic form validation for the user which will also be mirrored on the server side. So the target toolset will be HTML5, JavaScript, probably JQuery(UI). My question is more related to the software architecture/design of a system that enforces certain rules. Separation of ruleset and presentation One problem I am having is that I want to separate the game rules from the presentation. The first step would be to make an own module for the game "engine" that only exposes an interface that allows all actions to be taken in a clean way. If an action fails with regard to some pre/post condition, the engine throws an exception which is then presented to the user like "you cannot sell something you do not own" or "after that you would end up in a situation which is not a valid game state." The problem here is that I would like to be able to not even present invalid action in the first place or grey out the corresponding UI elements. Changing and tweaking the ruleset Another big thing is the ruleset. It will probably evolve over time and most definitely must be tweaked. What's more, it should be possible (to a certain extent) to build a ruleset that fits a specific game round, i.e. choosing different kinds of behaviours in different aspects of the game. This would do something like "we play it with extension A today but we throw out extension B." For me, this screams "Architectural/Design pattern" but I have no idea on who might have published on something like this, not even what to google for.

  Read the article

• I need help with 2D collision response (of stacking rotating polygons, with friction and gravity, for a game)

  - by Register Sole

  Hi I am looking for suggestions on how to write a collision response for game programming purpose (so not a scientific simulation). I am dealing with 2D polygons that are rotating, and I want them to be able to stack. I also want friction and gravity. I have a detection mechanism that returns the separating axis, how long the polygons are overlapping, and up to 2 points of contact. For the response, I am currently using an impulse-based response, which main idea is: find the separating axis, length of overlap, and the point of contact (if there are two, pick a random point between to simulate averaged force. i believe there are better ways than this) separate the object (modifying their positions, taking into account of their masses. i do not separate them completely though, to keep track that they are colliding to reduce jitter) calculate normal force based on the coefficient of restitution as if there is no friction. calculate friction, as if there is no normal force. I also assume that the direction of the friction is the same throughout the collision. apply the two forces (which result in a rather inaccurate result, since each force is calculated as if the other is not present. for non-rotating bodies though, this method is exact) I am aware that this method requires the coefficient of friction to be sufficiently small due to the assumption that the direction of friction stays the same in a collision. Also, the result is visually satisfying if gravity is not present. However, when there is gravity, objects on ground jitter and drift (even with zero coefficient of restitution)! It also happens for stacking objects. Larger coefficient of restitution and gravity increase the jittering. I hope you can help me with this. Some things i would like to know more about is how to handle collision with two point of contacts (how to end up having an object sitting still on the ground?), how to reduce, and prevent if possible, jitter and drift (do people use the most accurate method possible, or is there a trick to overcome this?), and how to handle multiple objects collision (for example, in the case of stacking objects, how do I check collisions between all of them and keep them all stable at every frame so they don't jitter?). A total reformulation of my algorithm is also welcomed, as long as it works. Another thing to note is that I am not making a Physics game, so I only need a visually satisfying response (though a realistic response is preferable, if it is not performance-heavy). But surely jittering and drifting objects on flat ground are not at all acceptable. In addition, I am a Physics student, so feel free to talk about impulse and whatever needed. Finally, I'm sorry for the long post. I tried to be as concise as I can. Thank you for reading it! EDIT It seems what I didn't manage to come up all this time is to separate resting contact as a class of its own and how to solve them. Currently reading the paper suggested by Jedediah. More suggestions on the topic are welcome :) CASE CLOSED After reading various papers referenced in the paper, successfully implemented simultaneous impulse method (referring to the original paper by Erin Catto, [Catt05]). Thanks maaaan!! The paper is wonderful. The current system is visibly much better than the previous. Still haven't separated resting contact as a class of its own though, which brings me to my next question. Love you all! Haha (sorry, I'm just so happy thanks to you).

  Read the article

• Reading graph inputs for a programming puzzle and then solving it

  - by Vrashabh

  I just took a programming competition question and I absolutely bombed it. I had trouble right at the beginning itself from reading the input set. The question was basically a variant of this puzzle http://codercharts.com/puzzle/evacuation-plan but also had an hour component in the first line(say 3 hours after start of evacuation). It reads like this This puzzle is a tribute to all the people who suffered from the earthquake in Japan. The goal of this puzzle is, given a network of road and locations, to determine the maximum number of people that can be evacuated. The people must be evacuated from evacuation points to rescue points. The list of road and the number of people they can carry per hour is provided. Input Specifications Your program must accept one and only one command line argument: the input file. The input file is formatted as follows: the first line contains 4 integers n r s t n is the number of locations (each location is given by a number from 0 to n-1) r is the number of roads s is the number of locations to be evacuated from (evacuation points) t is the number of locations where people must be evacuated to (rescue points) the second line contains s integers giving the locations of the evacuation points the third line contains t integers giving the locations of the rescue points the r following lines contain to the road definitions. Each road is defined by 3 integers l1 l2 width where l1 and l2 are the locations connected by the road (roads are one-way) and width is the number of people per hour that can fit on the road Now look at the sample input set 5 5 1 2 3 0 3 4 0 1 10 0 2 5 1 2 4 1 3 5 2 4 10 The 3 in the first line is the additional component and is defined as the number of hours since the resuce has started which is 3 in this case. Now my solution was to use Dijisktras algorithm to find the shortest path between each of the rescue and evac nodes. Now my problem started with how to read the input set. I read the first line in python and stored the values in variables. But then I did not know how to store the values of the distance between the nodes and what DS to use and how to input it to say a standard implementation of dijikstras algorithm. So my question is two fold 1.) How do I take the input of such problems? - I have faced this problem in quite a few competitions recently and I hope I can get a simple code snippet or an explanation in java or python to read the data input set in such a way that I can input it as a graph to graph algorithms like dijikstra and floyd/warshall. Also a solution to the above problem would also help. 2.) How to solve this puzzle? My algorithm was: Find shortest path between evac points (in the above example it is 14 from 0 to 3) Multiply it by number of hours to get maximal number of saves Also the answer given for the variant for the input set was 24 which I dont understand. Can someone explain that also. UPDATE: I get how the answer is 14 in the given problem link - it seems to be just the shortest path between node 0 and 3. But with the 3 hour component how is the answer 24 UPDATE I get how it is 24 - its a complete graph traversal at every hour and this is how I solve it Hour 1 Node 0 to Node 1 - 10 people Node 0 to Node 2- 5 people TotalRescueCount=0 Node 1=10 Node 2= 5 Hour 2 Node 1 to Node 3 = 5(Rescued) Node 2 to Node 4 = 5(Rescued) Node 0 to Node 1 = 10 Node 0 to Node 2 = 5 Node 1 to Node 2 = 4 TotalRescueCount = 10 Node 1 = 10 Node 2= 5+4 = 9 Hour 3 Node 1 to Node 3 = 5(Rescued) Node 2 to Node 4 = 5+4 = 9(Rescued) TotalRescueCount = 9+5+10 = 24 It hard enough for this case , for multiple evac and rescue points how in the world would I write a pgm for this ?

  Read the article

• I thought the new AUTO_SAMPLE_SIZE in Oracle Database 11g looked at all the rows in a table so why do I see a very small sample size on some tables?

  - by Maria Colgan

  I recently got asked this question and thought it was worth a quick blog post to explain in a little more detail what is going on with the new AUTO_SAMPLE_SIZE in Oracle Database 11g and what you should expect to see in the dictionary views. Let’s take the SH.CUSTOMERS table as an example.  There are 55,500 rows in the SH.CUSTOMERS tables. If we gather statistics on the SH.CUSTOMERS using the new AUTO_SAMPLE_SIZE but without collecting histogram we can check what sample size was used by looking in the USER_TABLES and USER_TAB_COL_STATISTICS dictionary views. The sample sized shown in the USER_TABLES is 55,500 rows or the entire table as expected. In USER_TAB_COL_STATISTICS most columns show 55,500 rows as the sample size except for four columns (CUST_SRC_ID, CUST_EFF_TO, CUST_MARTIAL_STATUS, CUST_INCOME_LEVEL ). The CUST_SRC_ID and CUST_EFF_TO columns have no sample size listed because there are only NULL values in these columns and the statistics gathering procedure skips NULL values. The CUST_MARTIAL_STATUS (38,072) and the CUST_INCOME_LEVEL (55,459) columns show less than 55,500 rows as their sample size because of the presence of NULL values in these columns. In the SH.CUSTOMERS table 17,428 rows have a NULL as the value for CUST_MARTIAL_STATUS column (17428+38072 = 55500), while 41 rows have a NULL values for the CUST_INCOME_LEVEL column (41+55459 = 55500). So we can confirm that the new AUTO_SAMPLE_SIZE algorithm will use all non-NULL values when gathering basic table and column level statistics. Now we have clear understanding of what sample size to expect lets include histogram creation as part of the statistics gathering. Again we can look in the USER_TABLES and USER_TAB_COL_STATISTICS dictionary views to find the sample size used. The sample size seen in USER_TABLES is 55,500 rows but if we look at the column statistics we see that it is same as in previous case except  for columns  CUST_POSTAL_CODE and  CUST_CITY_ID. You will also notice that these columns now have histograms created on them. The sample size shown for these columns is not the sample size used to gather the basic column statistics. AUTO_SAMPLE_SIZE still uses all the rows in the table - the NULL rows to gather the basic column statistics (55,500 rows in this case). The size shown is the sample size used to create the histogram on the column. When we create a histogram we try to build it on a sample that has approximately 5,500 non-null values for the column.  Typically all of the histograms required for a table are built from the same sample. In our example the histograms created on CUST_POSTAL_CODE and the CUST_CITY_ID were built on a single sample of ~5,500 (5,450 rows) as these columns contained only non-null values. However, if one or more of the columns that requires a histogram has null values then the sample size maybe increased in order to achieve a sample of 5,500 non-null values for those columns. n addition, if the difference between the number of nulls in the columns varies greatly, we may create multiple samples, one for the columns that have a low number of null values and one for the columns with a high number of null values.  This scheme enables us to get close to 5,500 non-null values for each column. +Maria Colgan

  Read the article

• tightvnc authentication failure

  - by broiyan

  When I run a tightvnc client to establish a VNC session I sometimes receive an error message that suggests there are repeated failed VNC login attempts or a brute force attack. The message dialog title is "unsupported security type" and the text content is "too many authentication failures, try another connection? yes/no". This problem goes away if I reboot the Ubuntu server and reload the VNC server program and try again. From that point, it will work for multiple VNC sessions. My VNC sessions are typically about 20 minutes. At some time in the future, the problem may recur so it seems correlated to the time the server has been up or the time tightvnc has been loaded. Typically it takes only a day or so before the problem comes back. I am using tightvnc 1.3 on an server running Ubuntu 12.04. The version of vncserver is rather dated because that seems to be all that is available from tightvnc for linux servers. On the client side I use the newest Java-based VNC client (version 2.5) for both Windows access and Ubuntu access. All my VNC sessions are via SSH. I am the only user and I will typically use only the same client computer. How can I stop this problem from recurring? Edit I found the log file. This is a small excerpt of what I am seeing. Essentially, various IPs, not my own, are attempting to connect. What is the practical solution for this? 05/06/12 20:07:32 Got connection from client 69.194.204.90 05/06/12 20:07:32 Non-standard protocol version 3.4, using 3.3 instead 05/06/12 20:07:32 Too many authentication failures - client rejected 05/06/12 20:07:32 Client 69.194.204.90 gone 05/06/12 20:07:32 Statistics: 05/06/12 20:07:32 framebuffer updates 0, rectangles 0, bytes 0 05/06/12 20:24:56 Got connection from client 79.161.16.40 05/06/12 20:24:56 Non-standard protocol version 3.4, using 3.3 instead 05/06/12 20:24:56 Too many authentication failures - client rejected 05/06/12 20:24:56 Client 79.161.16.40 gone 05/06/12 20:24:56 Statistics: 05/06/12 20:24:56 framebuffer updates 0, rectangles 0, bytes 0 05/06/12 20:29:27 Got connection from client 109.230.246.54 05/06/12 20:29:27 Non-standard protocol version 3.4, using 3.3 instead 05/06/12 20:29:28 rfbVncAuthProcessResponse: authentication failed from 109.230.246.54 05/06/12 20:29:28 Client 109.230.246.54 gone 05/06/12 20:29:28 Statistics: 05/06/12 20:29:28 framebuffer updates 0, rectangles 0, bytes 0

  Read the article

• SQL Server Licensing in a VMware vSphere Cluster

  - by Helvick

  If I have SQL Server 2008 instances running in virtual machines on a VMware vSphere cluster with vMotion\DRS enabled so that the VM's can (potentially) run on any one of the physical servers in the cluster what precisely are the license requirements? For example assume that I have 4 physical ESX Hosts with dual physical CPU's and 3 separate single vCPU Virtual Machines running SQL Server 2008 running in that cluster. How many SQL Standard Processor licenses would I need? Is it 3 (one per VM) or 12 (one per VM on each physical host) or something else? How many SQL Enterprise Processor licenses would I need? Is it 3 (one per VM) or 8 (one for each physical CPU in the cluster) or, again, something else? The range in the list prices for these options goes from $17k to $200k so getting it right is quite important. Bonus question: If I choose the Server+CAL licensing model do I need to buy multiple Server instance licenses for each of the ESX hosts (so 12 copies of the SQL Server Standard server license so that there are enough licenses on each host to run all VM's) or again can I just license the VM and what difference would using Enterprise per server licensing make? Edited to Add Having spent some time reading the SQL 2008 Licensing Guide (63 Pages! Includes Maps!*) I've come across this: • Under the Server/CAL model, you may run unlimited instances of SQL Server 2008 Enterprise within the server farm, and move those instances freely, as long as those instances are not running on more servers than the number of licenses assigned to the server farm. • Under the Per Processor model, you effectively count the greatest number of physical processors that may support running instances of SQL Server 2008 Enterprise at any one time across the server farm and assign that number of Processor licenses And earlier: ..For SQL Server, these rule changes apply to SQL Server 2008 Enterprise only. By my reading this means that for my 3 VM's I only need 3 SQL 2008 Enterprise Processor Licenses or one copy of Server Enterprise + CALs for the cluster. By implication it means that I have to license all processors if I choose SQL 2008 Standard Processor licensing or that I have to buy a copy of SQL Server 2008 Standard for each ESX host if I choose to use CALs. *There is a map to demonstrate that a Server Farm cannot extend across an area broader than 3 timezones unless it's in the European Free Trade Area, I wasn't expecting that when I started reading it.

  Read the article

• Replace dual-XP installs with single-XP install and repartition drive?

  - by caeious

  Hello, The Current Situation I have a hard drive that currently is split up like so: Primary Partition C: 9.77 GB NTFS Healthy (System) with XP Pro (in Polish) installed Extended Partition D: 39.82 GB NTFS Healthy (Boot) with XP Pro (in English) installed 6.30 GB Free space When I start my comuter I get a black and white Windows Boot Manager dual boot screen with 2 choices both being Microsoft Windows XP. The first choice is the English version of XP and the second choice is the Polish version of XP. Images of my Computer Management window and Dual Boot screen The Mission What I need to do is get rid of the entire extended partition (D: 39.82 GB & 6.30 free space) and just have the one primary C: drive which I assume will be somewheres around 55 GB big. So in the end I just want XP Pro in English running on my C: drive and no black and white boot screen to show up when starting up my laptop. The Question How do I go about successfully completing The Mission with out making my computer a useless pile of silicon, plastic and metal? UPDATE: So I went ahead and tried to follow Neal's suggestion but hit a wall. I got to a Windows XP Pro install screen that had the 3 following options as well as my drive data: To set up Windows XP on the selected item, press Enter To create a partition in the unpartitioned space, press C To delete the selected partition, press D 57232 MB Disk 0 at Id 0 on bus 0 on atapi [MBR] C: Partition1 [NTFS] 10001 MB ( 4642 MB free ) Unpartitioned space 6448 MB D: Partition2 [NTFS] 40774 MB ( 26225 MB free ) Unpartitioned space 8 MB I figured I would go with the first choice ((To set up Windows XP on the selected item, press Enter)) because I just wanted to set up Windows XP on C: Partition1 (which was preselected) so I pressed Enter which brought me to a screen displaying this message: You chose to install Windows XP on a partition that contains another operating system. Installing Windows XP on this partition might cause the other operating system to function improperly. CAUTION: Installing multiple operating systems on a single partition is not recommended. So this leads me to 2 new questions: How do I get rid of the Windows XP (Polish language) install on C: Partition 1 so that I can cleanly and safely install Windows XP (English language) on it? Neal, is this what you meant by me possibly having to delete the partition that the Windows XP (Polish language) install was located on? Since I have the option to delete partitions with the 3rd choice ((To delete the selected partition, press D)), should I do that on this screen or wait until I have Windows XP (English language) safely installed on C: Partition 1? I have to ask these questions because I have read that it is possibly dangerous to delete hard drive partitions. Just being cautious.

  Read the article

• LVM mirror attempt results in "Insufficient free space"

  - by MattK

  Attempting to add a disk to mirror an LVM volume on CentOS 7 always fails with "Insufficient free space: 1 extents needed, but only 0 available". Having searched for a solution, I have tried specifying disks, multiple logging options, adding 3rd log partition, but have not found a solution Not sure if I am making a rookie mistake, or there is something more subtle wrong (I am more familiar with ZFS, new to using LVM): # lvconvert -m1 centos_bi/home Insufficient free space: 1 extents needed, but only 0 available # lvconvert -m1 --corelog centos_bi/home Insufficient free space: 1 extents needed, but only 0 available # lvconvert -m1 --corelog --alloc anywhere centos_bi/home Insufficient free space: 1 extents needed, but only 0 available # lvconvert -m1 --mirrorlog mirrored --alloc anywhere centos_bi/home /dev/sda2 Insufficient free space: 1 extents needed, but only 0 available # lvconvert -m1 --corelog --alloc anywhere centos_bi/home /dev/sdi2 /dev/sda2 Insufficient free space: 1 extents needed, but only 0 available The two disks are of the same size, and have identical partition layouts via "sfdisk -d /dev/sdi part_table; sfdisk /dev/sda < part_table". The current configuration is detailed below. # pvs PV VG Fmt Attr PSize PFree /dev/sda1 centos_bi lvm2 a-- 496.00m 496.00m /dev/sda2 centos_bi lvm2 a-- 465.27g 465.27g /dev/sdi2 centos_bi lvm2 a-- 465.27g 0 # vgs VG #PV #LV #SN Attr VSize VFree centos_bi 3 3 0 wz--n- 931.02g 465.75g # lvs -a -o +devices LV VG Attr LSize Pool Origin Data% Move Log Cpy%Sync Convert Devices home centos_bi -wi-ao---- 391.64g /dev/sdi2(6050) root centos_bi -wi-ao---- 50.00g /dev/sdi2(106309) swap centos_bi -wi-ao---- 23.63g /dev/sdi2(0) # pvdisplay --- Physical volume --- PV Name /dev/sdi2 VG Name centos_bi PV Size 465.27 GiB / not usable 3.00 MiB Allocatable yes (but full) PE Size 4.00 MiB Total PE 119109 Free PE 0 Allocated PE 119109 --- Physical volume --- PV Name /dev/sda2 VG Name centos_bi PV Size 465.27 GiB / not usable 3.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 119109 Free PE 119109 Allocated PE 0 --- Physical volume --- PV Name /dev/sda1 VG Name centos_bi PV Size 500.00 MiB / not usable 4.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 124 Free PE 124 Allocated PE 0 # vgdisplay --- Volume group --- VG Name centos_bi System ID Format lvm2 Metadata Areas 3 Metadata Sequence No 10 VG Access read/write VG Status resizable MAX LV 0 Cur LV 3 Open LV 3 Max PV 0 Cur PV 3 Act PV 3 VG Size 931.02 GiB PE Size 4.00 MiB Total PE 238342 Alloc PE / Size 119109 / 465.27 GiB Free PE / Size 119233 / 465.75 GiB # lvdisplay --- Logical volume --- LV Path /dev/centos_bi/swap LV Name swap VG Name centos_bi LV Write Access read/write LV Creation host, time localhost, 2014-08-07 16:34:34 -0400 LV Status available # open 2 LV Size 23.63 GiB Current LE 6050 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Path /dev/centos_bi/home LV Name home VG Name centos_bi LV Write Access read/write LV Creation host, time localhost, 2014-08-07 16:34:35 -0400 LV Status available # open 1 LV Size 391.64 GiB Current LE 100259 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Path /dev/centos_bi/root LV Name root VG Name centos_bi LV Write Access read/write LV Creation host, time localhost, 2014-08-07 16:34:37 -0400 LV Status available # open 1 LV Size 50.00 GiB Current LE 12800 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0

  Read the article

• How to start networking on a wired interface before logon in Ubuntu Desktop Edition

  - by Burly

  Problem Ubuntu 9.10 Desktop Edition (and possibly previous versions as well, I haven't tested them) has no network connections after boot until at least 1 user logs in. This means any services that require networking (e.g. openssh-server) are not available until someone logs in locally either via gdm, kdm, or a TTY. Background Ubuntu 9.10 Desktop Edition uses the NetworkManager service to take commands from the nm-applet in Gnome (or it's equivalent in KDE). As I understand it, while NetworkManager is running at boot, it is not issued any commands to connect until you login for the first time because nm-applet isn't running until you login and your Gnome session starts (or similar for KDE). I'm not sure what prompts NetworkManager to connect to the network when you login via a TTY. There are several relevant variables involved in starting up the network connections including: Wired vs Wireless (and the resulting drivers, SSID, passwords, and priorities) Static vs DHCP Multiple interfaces Constraints Support Ubuntu 9.10 Karmic Koala (bonus points for additional supported versions) Support wired eth0 interface Receive an IP address via DHCP Receive DNS information via DHCP (obviously the DHCP server must provide this information) Enable networking at the proper time (e.g. some time after file systems are loaded but before network services like ssh start) Switching distros or versions (e.g. to Server Edition) is not an acceptable solution Switching to a Static IP configuration is not an acceptable solution Question How to start networking on a wired interface before logon in Ubuntu Desktop Edition? What I have tried Per this guide, adding the following entry into /etc/network/interfaces so that NetworkManager won't manage the eth0 interface: auth eth0 iface inet dhcp After reboot eth0 is down. Issuing ifconfig eth0 up brings the interface up but it receives no IP address. Issuing dhclient eth0 instead Does bring up the interface and it Does receive an IP address. Completely removing the NetworkManager package in addition to the settings above. I'm a bit confused with the whole UpStart/SysVinit mangling that's going in Ubuntu currently (I'm more familiar with the CentOS world). However, directly issuing sudo /etc/init.d/networking start Or sudo start networking does not bring up the eth0 interface at all, much less get an IP address. See-Also How to force NetworkManager to make a connection before login? References Ubuntu Desktop Edition Ubuntu Networking Configuration Using Command Line Automatic Network Configuration Via Command-Line Start network connection before login

  Read the article

• SQL Server Licensing in a VMware vSphere Cluster

  - by Helvick

  If I have SQL Server 2008 instances running in virtual machines on a VMware vSphere cluster with vMotion\DRS enabled so that the VM's can (potentially) run on any one of the physical servers in the cluster what precisely are the license requirements? For example assume that I have 4 physical ESX Hosts with dual physical CPU's and 3 separate single vCPU Virtual Machines running SQL Server 2008 running in that cluster. How many SQL Standard Processor licenses would I need? Is it 3 (one per VM) or 12 (one per VM on each physical host) or something else? How many SQL Enterprise Processor licenses would I need? Is it 3 (one per VM) or 8 (one for each physical CPU in the cluster) or, again, something else? The range in the list prices for these options goes from $17k to $200k so getting it right is quite important. Bonus question: If I choose the Server+CAL licensing model do I need to buy multiple Server instance licenses for each of the ESX hosts (so 12 copies of the SQL Server Standard server license so that there are enough licenses on each host to run all VM's) or again can I just license the VM and what difference would using Enterprise per server licensing make? Edited to Add Having spent some time reading the SQL 2008 Licensing Guide (63 Pages! Includes Maps!*) I've come across this: • Under the Server/CAL model, you may run unlimited instances of SQL Server 2008 Enterprise within the server farm, and move those instances freely, as long as those instances are not running on more servers than the number of licenses assigned to the server farm. • Under the Per Processor model, you effectively count the greatest number of physical processors that may support running instances of SQL Server 2008 Enterprise at any one time across the server farm and assign that number of Processor licenses And earlier: ..For SQL Server, these rule changes apply to SQL Server 2008 Enterprise only. By my reading this means that for my 3 VM's I only need 3 SQL 2008 Enterprise Processor Licenses or one copy of Server Enterprise + CALs for the cluster. By implication it means that I have to license all processors if I choose SQL 2008 Standard Processor licensing or that I have to buy a copy of SQL Server 2008 Standard for each ESX host if I choose to use CALs. *There is a map to demonstrate that a Server Farm cannot extend across an area broader than 3 timezones unless it's in the European Free Trade Area, I wasn't expecting that when I started reading it.

  Read the article

• What is the difference between Anycast and GeoDNS / GeoIP wrt HA?

  - by Riyad

  Based on the Wikipedia description of Anycast, it includes both the distribution of a domain-name-to-many-IP-mapping across many DNS servers as well as replying to clients with the most geographically close (or fastest) server. In the context of a globally distributed, highly available site like google.com (or any CDN service with many global edge locations) this sounds like the two key features one would need. DNS services like Amazon's Route53, EasyDNS and DNSMadeEasy all advertise themselves as Anycast-enabled networks. Therefore my assumption is that each of these DNS services transparently offer me those two killer features: multi-IP-to-domain mapping AND routing clients to the closest node. However, each of these services seem to separate out these two functionalities, referring to the 2nd one (routing clients to closest node) as "GeoDNS", "GeoIP" or "Global Traffic Director" and charge extra for the service. If a core tenant of an Anycast-capable system is to already do this, why is this functionality being earmarked as this extra feature? What is this "GeoDNS" feature doing that a standard Anycast DNS service won't do (according to the definition of Anycast from Wikipedia -- I understand what is being advertised, just not why it isn't implied already). I get extra-confused when a DNS service like Route53 that doesn't support this nebulous "GeoDNS" feature lists functionality like: Fast – Using a global anycast network of DNS servers around the world, Route 53 is designed to automatically route your users to the optimal location depending on network conditions. As a result, the service offers low query latency for your end users, as well as low update latency for your DNS record management needs. ... which sounds exactly like what GeoDNS is intended to do, but geographically directing clients is something they explicitly don't support it yet. Ultimately I am looking for the two following features from a DNS provider: Map multiple IP addresses to a single domain name (like google.com, amazon.com, etc. does) Utilize a DNS service that will respond to client requests for that domain with the IP address of the nearest server to the requestee. As mentioned, it seems like this is all part of an "Anycast" DNS service (all of which these services are), but the features and marketing I see from them suggest otherwise, making me think I need to learn a bit more about how DNS works before making a deployment choice. Thanks in advance for any clarifications.

  Read the article

• Disk is spinning down each minute, unable to disable it

  - by lzap

  I played with spindown and APM settings of my Samsung discs and now they spin down every minute. I want to disable it, but it seems it does not accept any of the spindown time or APM values. Nothing works, it's all the same. Please help what values should be proper for it. I do not want it to spin down at all. /dev/sda: ATA device, with non-removable media Model Number: SAMSUNG HD154UI Serial Number: S1Y6J1KZ206527 Firmware Revision: 1AG01118 Standards: Used: ATA-8-ACS revision 3b Supported: 7 6 5 4 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 2930277168 Logical/Physical Sector size: 512 bytes device size with M = 1024*1024: 1430799 MBytes device size with M = 1000*1000: 1500301 MBytes (1500 GB) cache/buffer size = unknown Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE * Advanced Power Management feature set Power-Up In Standby feature set * SET_FEATURES required to spinup after power up SET_MAX security extension Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test Media Card Pass-Through * General Purpose Logging feature set * 64-bit World wide name * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Native Command Queueing (NCQ) * Host-initiated interface power management * Phy event counters * NCQ priority information DMA Setup Auto-Activate optimization Device-initiated interface power management * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count supported: enhanced erase 326min for SECURITY ERASE UNIT. 326min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50024e900300cca3 NAA : 5 IEEE OUI : 0024e9 Unique ID : 00300cca3 Checksum: correct I have the very same disc which I did not "tuned" and it does not spin. But I do not know where to read the settings from. The hdparm only shows this: Advanced power management level: 60 Recommended acoustic management value: 254, current value: 0 Edit: It seems the issue was tuned daemon in RHEL6. It was too aggressive, I turned off disc tuning and it seems they are no longer spinning down.

  Read the article

• Using Diskpart in a PowerShell script won't allow script to reuse drive letter

  - by Kyle

  I built a script that mounts (attach) a VHD using Diskpart, cleans out some system files and then unmounts (detach) it. It uses a foreach loop and is suppose to clean multiple VHD using the same drive letter. However, after the 1st VHD it fails. I also noticed that when I try to manually attach a VHD with diskpart, diskpart succeeds, the Disk Manager shows the disk with the correct drive letter, but within the same PoSH instance I can not connect (set-location) to that drive. If I do a manual diskpart when I 1st open PoSH I can attach and detach all I want and I get the drive letter every time. Is there something I need to do to reset diskpart in the script? Here's a snippet of the script I'm using. function Mount-VHD { [CmdletBinding()] param ( [Parameter(Position=0,Mandatory=$true,ValueFromPipeline=$false)] [string]$Path, [Parameter(Position=1,Mandatory=$false,ValueFromPipeline=$false)] [string]$DL, [string]$DiskpartScript = "$env:SystemDrive\DiskpartScript.txt", [switch]$Rescan ) begin { function InvokeDiskpart { Diskpart.exe /s $DiskpartScript } ## Validate Operating System Version ## if (Get-WmiObject win32_OperatingSystem -Filter "Version < '6.1'") {throw "The script operation requires at least Windows 7 or Windows Server 2008 R2."} } process{ ## Diskpart Script Content ## Here-String statement purposefully not indented ## @" $(if ($Rescan) {'Rescan'}) Select VDisk File="$Path" `nAttach VDisk Exit "@ | Out-File -FilePath $DiskpartScript -Encoding ASCII -Force InvokeDiskpart Start-Sleep -Seconds 3 @" Select VDisk File="$Path"`nSelect partition 1 `nAssign Letter="$DL" Exit "@ | Out-File -FilePath $DiskpartScript -Encoding ASCII -Force InvokeDiskpart } end { Remove-Item -Path $DiskpartScript -Force ; "" Write-Host "The VHD ""$Path"" has been successfully mounted." ; "" } } function Dismount-VHD { [CmdletBinding()] param ( [Parameter(Position=0,Mandatory=$true,ValueFromPipeline=$false)] [string]$Path, [switch]$Remove, [switch]$NoConfirm, [string]$DiskpartScript = "$env:SystemDrive\DiskpartScript.txt", [switch]$Rescan ) begin { function InvokeDiskpart { Diskpart.exe /s $DiskpartScript } function RemoveVHD { switch ($NoConfirm) { $false { ## Prompt for confirmation to delete the VHD file ## "" ; Write-Warning "Are you sure you want to delete the file ""$Path""?" $Prompt = Read-Host "Type ""YES"" to continue or anything else to break" if ($Prompt -ceq 'YES') { Remove-Item -Path $Path -Force "" ; Write-Host "VHD ""$Path"" deleted!" ; "" } else { "" ; Write-Host "Script terminated without deleting the VHD file." ; "" } } $true { ## Confirmation prompt suppressed ## Remove-Item -Path $Path -Force "" ; Write-Host "VHD ""$Path"" deleted!" ; "" } } } ## Validate Operating System Version ## if (Get-WmiObject win32_OperatingSystem -Filter "Version < '6.1'") {throw "The script operation requires at least Windows 7 or Windows Server 2008 R2."} } process{ ## DiskPart Script Content ## Here-String statement purposefully not indented ## @" $(if ($Rescan) {'Rescan'}) Select VDisk File="$Path"`nDetach VDisk Exit "@ | Out-File -FilePath $DiskpartScript -Encoding ASCII -Force InvokeDiskpart Start-Sleep -Seconds 10 } end { if ($Remove) {RemoveVHD} Remove-Item -Path $DiskpartScript -Force ; "" } }

  Read the article

• Ububtu server 12.04 auto installation freezes at kickseeding running if ks.cfg has post scripts

  - by john206

  I'm trying to make a custom Ubuntu Server iso file. Kickstart file (ks.cfg) runs smooth when there is no %post in the file and Ubuntu installs correctly with ks configuration. Installation finishes installing base, apt, grub and It echos: Kickseed Running... and it freezes @ 0% I thought may be apt-get update doesnt work in ks file, I tried to install other apps like apache2 but no luck I have created dozen iso images and installed them in Virtual Box.I have been googling for 3 days and checked out ubuntu forums but haven't figured out the issue. I appreciate your help. This is how I made the iso image. My ks.file and txt.cfg files located in isolinux directory: root@ubuntu:/home/work mount -o loop ubuntu-12.04-amd64.iso original-iso/ rsync -a original-iso/ custom-iso/ cp ks.cfg custom-iso/isolinux/ cp txt.cfg custom-iso/isolinux/ chmod -R 777 custom-iso/ #Creating Iso image mkisofs -D -r -V “$IMAGE_NAME” -cache-inodes -J -l -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -o ~/ubuntu-12.04-alternate-custom-amd64.iso custom-iso/ ks.cfg #Generated by Kickstart Configurator #platform=AMD64 or Intel EM64T #System language lang en_US #Language modules to install langsupport en_US #System keyboard keyboard us #System mouse mouse #System timezone timezone America/Los_Angeles #Root password rootpw --iscrypted somethingsomething #Initial user user ubuntu --fullname "ubuntu" --iscrypted --password somethingsomething. #Reboot after installation reboot #Use text mode install text #Install OS instead of upgrade install #Use CDROM installation media cdrom #System bootloader configuration bootloader --location=mbr #Clear the Master Boot Record zerombr yes #Partition clearing information clearpart --all --initlabel #Disk partitioning information part /boot --size 128 --fstype=ext3 --asprimary part / --size 512 --fstype=ext3 --asprimary part swap --size 512 part /tmp --size 512 --fstype=ext3 part /var --size 512 --fstype=ext3 part /usr --size 4096 --fstype=ext3 part /home --size 2048 --fstype=ext3 #System authorization infomation auth --useshadow --enablemd5 #Network information network --bootproto=dhcp --device=eth0 #Firewall configuration firewall --disabled --http --ftp --ssh #X Window System configuration information xconfig --depth=32 --resolution=1024x768 --defaultdesktop=GNOME %post apt-get update mkdir /home/user txt.cfg default autoinstall label autoinstall menu label ^Install Custom Ubuntu Server kernel /install/vmlinuz append file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet ks=cdrom:/isolinux/ks.cfg -- label install menu label ^Install Ubuntu Server kernel /install/vmlinuz append file=/cdrom/preseed/ubuntu-server.seed vga=788 initrd=/install/initrd.gz quiet -- label cloud menu label ^Multiple server install with MAAS kernel /install/vmlinuz append modules=maas-enlist-udeb vga=788 initrd=/install/initrd.gz quiet -- label check menu label ^Check disc for defects kernel /install/vmlinuz append MENU=/bin/cdrom-checker-menu vga=788 initrd=/install/initrd.gz quiet -- label memtest menu label Test ^memory kernel /install/mt86plus label hd menu label ^Boot from first hard disk localboot 0x80

  Read the article

• How to use bzdiff to find difference between 2 bzipped files with diff -I option?

  - by englebip

  I'm trying to do a diff on MySQL dumps (created with mysqldump and piped to bzip2), to see if there are changes between consecutive dumps. The followings are the tails of 2 dumps: tmp1: /*!40101 SET SQL_MODE=@OLD_SQL_MODE */; /*!40014 SET FOREIGN_KEY_CHECKS=@OLD_FOREIGN_KEY_CHECKS */; /*!40014 SET UNIQUE_CHECKS=@OLD_UNIQUE_CHECKS */; /*!40101 SET CHARACTER_SET_CLIENT=@OLD_CHARACTER_SET_CLIENT */; /*!40101 SET CHARACTER_SET_RESULTS=@OLD_CHARACTER_SET_RESULTS */; /*!40101 SET COLLATION_CONNECTION=@OLD_COLLATION_CONNECTION */; /*!40111 SET SQL_NOTES=@OLD_SQL_NOTES */; -- Dump completed on 2011-03-11 1:06:50 tmp2: /*!40101 SET SQL_MODE=@OLD_SQL_MODE */; /*!40014 SET FOREIGN_KEY_CHECKS=@OLD_FOREIGN_KEY_CHECKS */; /*!40014 SET UNIQUE_CHECKS=@OLD_UNIQUE_CHECKS */; /*!40101 SET CHARACTER_SET_CLIENT=@OLD_CHARACTER_SET_CLIENT */; /*!40101 SET CHARACTER_SET_RESULTS=@OLD_CHARACTER_SET_RESULTS */; /*!40101 SET COLLATION_CONNECTION=@OLD_COLLATION_CONNECTION */; /*!40111 SET SQL_NOTES=@OLD_SQL_NOTES */; -- Dump completed on 2011-03-11 0:40:11 When I bzdiff their bzipped version: $ bzdiff tmp?.bz2 10c10 < -- Dump completed on 2011-03-11 1:06:50 --- > -- Dump completed on 2011-03-11 0:40:11 According to the manual of bzdiff, any option passed on to bzdiff is passed on to diff. I therefore looked at the -I option that allows to define a regexp; lines matching it are ignored in the diff. When I then try: $ bzdiff -I'Dump' tmp1.bz2 tmp2.bz2 I get an empty diff. I would like to match as much as possible of the "Dump completed" line, though, but when I then try: $ bzdiff -I'Dump completed' tmp1.bz2 tmp2.bz2 diff: extra operand `/tmp/bzdiff.miCJEvX9E8' diff: Try `diff --help' for more information. Same thing happens for some variations: $ bzdiff '-IDump completed' tmp1.bz2 tmp2.bz2 $ bzdiff '-I"Dump completed"' tmp1.bz2 tmp2.bz2 $ bzdiff -'"IDump completed"' tmp1.bz2 tmp2.bz2 If I diff the un-bzipped files there is no problem: $diff -I'^[-][-] Dump completed on' tmp1 tmp2 gives also an empty diff. bzdiff is a shell script usually placed in /bin/bzdiff. Essentially, it parses the command options and passes them on to diff as follows: OPTIONS= FILES= for ARG do case "$ARG" in -*) OPTIONS="$OPTIONS $ARG";; *) if test -f "$ARG"; then FILES="$FILES $ARG" else echo "${prog}: $ARG not found or not a regular file" exit 1 fi ;; esac done [...] bzip2 -cdfq "$1" | $comp $OPTIONS - "$tmp" I think the problem stems from escaping the spaces in the passing of $OPTIONS to diff, but I couldn't figure out how to get it interpreted correctly. Any ideas? EDIT @DerfK: Good point with the ., I had forgotten about them... I tried the suggestion with the multiple level of quotes, but that is still not recognized: $ bzdiff "-I'\"Dump.completed.on\"'" tmp1.bz2 tmp2.bz2 diff: extra operand `/tmp/bzdiff.Di7RtihGGL'

  Read the article

• Error 80073701 when installing Windows 7 Service Pack 1

  - by Wagner Maestrelli

  I tried to install the Windows 7 Service Pack 1 using Windows Update and I got an error (code 80073701 - unknown error). I tried it again, same thing. Rebooted and tried again, same error. Before I tried to install the SP1 I had installed all the previous updates. I have Windows 7 Ultimate 32-bits. Has anyone gone through the same problem? Any ideas of what might be happening? Thanks! UPDATE: I installed the System Update Readiness Tool. Then, I tried to install the SP1 again, but the installation failed again with the same error. As I thought I was running out of options, I downloaded the SP1 package (500+ MB) and tried to install manually. Before that, I reinstalled the SUR Update. Well, the manual installation of the SP1 failed again. Then I learned about the c:\Windows\Logs\CBS\CheckSUR.log file (thanks Patches!). I checked it out. As I installed the SUR Update multiple times, the older logs are kept in the c:\Windows\Logs\CBS\CheckSUR.persist.log file. In the first time the SUR update was installed there was an error, which is said to have been fixed. In the subsequent logs, no errors were detected. The log with the error: ================================= Checking System Update Readiness. Binary Version 6.1.7600.20593 Package Version 7.0 2010-03-19 09:57 Checking Windows Servicing Packages Checking Package Manifests and Catalogs (f) CBS MUM Corrupt 0x800B0100 servicing\Packages\Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~x86~pt-BR~6.1.7600.16385.mum servicing\Packages\Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~x86~pt-BR~6.1.7600.16385.cat Package manifest cannot be validated by the corresponding catalog (fix) CBS MUM Corrupt CBS File Replaced Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~x86~pt-BR~6.1.7600.16385.mum from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-rtm-client-cab3-x86.cab. (fix) CBS Paired File CBS File also Replaced Microsoft-Windows-Client-LanguagePack-Package~31bf3856ad364e35~x86~pt-BR~6.1.7600.16385.cat from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-rtm-client-cab3-x86.cab. Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store Summary: Seconds executed: 224 Found 1 errors Fixed 1 errors CBS MUM Corrupt Total count: 1 Fixed: CBS MUM Corrupt. Total count: 1 Fixed: CBS Paired File. Total count: 1 It seems it has something to do with the Brazilian Portuguese Language Pack, which happens to be my native language. Problem is I can't uninstall the language pack since it is my system default language. And I haven't found any place to download it so I could reinstall it manually. Well, any ideas? Thanks!

  Read the article

• Windows Server 2003 IPSec Tunnel Connected, But Not Working (Possibly NAT/RRAS Related)

  - by Kevinoid

  Configuration I have setup a "raw" IPSec tunnel between a Windows Server 2003 (SBS) machine and a Netgear FVG318 according to the instructions in Microsoft KB816514. The configuration is as follows (using the same conventions as the article): NetA | SBS2003 | FVG318 | NetB 10.0.0.0/24 | 216.x.x.x | 69.y.y.y | 10.0.254.0/24 Both the Main Mode and Quick Mode Security Associations are successfully completed and appear in the IP Security Monitor. I am also able to ping the SBS2003 server on its private address from any computer on NetB. The Problem Any traffic sent from a computer on NetA to NetB, or from SBS2003 to NetB (excluding ICMP Ping responses), is sent out on the public network interface outside the IPSec tunnel (no encryption or header authentication, as if the tunnel were not there). Pings sent from a computer on NetB to a computer on NetA successfully reach computers on NetA, but the responses are silently discarded by SBS2003 (they do not go out in the clear and do not generate any encrypted traffic). Possible Solutions Incorrect Configuration I could have mistyped something, somewhere, or KB816514 could be incorrect in some way. I have tried very hard to eliminate the first option. Have re-created the configuration several times, tried tweaking and adjusting all the settings I could without success (most prevent the SA from being established). NAT/RRAS I have seen multiple posts elsewhere suggesting that this could be due to interaction between NAT and the IPSec filters. Possibly the NetA private addresses get rewritten to 216.x.x.x before being compared with the Quick Mode IPSec filters and don't get tunneled because of the mismatch. In fact, The Cable Guy article from June 2005 "TCP/IP Packet Processing Paths" suggests that this is the case, (see step 2 and 4 of the Transit Traffic path). If this is the case, is there a way to exclude NetA-NetB traffic from NAT? Any thoughts, ideas, suggestions, and/or comments are appreciated. Update (2011-06-26) After failing to solve the problem, I resorted to paid Microsoft support. They were unable to solve the problem. Since then I have implemented a solution based on Linux that is working quite well. I will attempt to evaluate any proposed answers as best I can, but current configurations and time constraints will make this slow...

  Read the article

• How to improve this bash shell script for turning hardlinks into symlinks?

  - by MountainX

  This shell script is mostly the work of other people. It has gone through several iterations, and I have tweaked it slightly while also trying to fully understand how it works. I think I understand it now, but I don't have confidence to significantly alter it on my own and risk losing data when I run the altered version. So I would appreciate some expert guidance on how to improve this script. The changes I am seeking are: make it even more robust to any strange file names, if possible. It currently handles spaces in file names, but not newlines. I can live with that (because I try to find any file names with newlines and get rid of them). make it more intelligent about which file gets retained as the actual inode content and which file(s) become sym links. I would like to be able to choose to retain the file that is either a) the shortest path, b) the longest path or c) has the filename with the most alpha characters (which will probably be the most descriptive name). allow it to read the directories to process either from parameters passed in or from a file. optionally, write a long of all changes and/or all files not processed. Of all of these, #2 is the most important for me right now. I need to process some files with it and I need to improve the way it chooses which files to turn into symlinks. (I tried using things like the find option -depth without success.) Here's the current script: #!/bin/bash # clean up known problematic files first. ## find /home -type f -wholename '*Icon* ## *' -exec rm '{}' \; # Configure script environment # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ set -o nounset dir='/SOME/PATH/HERE/' # For each path which has multiple links # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ # (except ones containing newline) last_inode= while IFS= read -r path_info do #echo "DEBUG: path_info: '$path_info'" inode=${path_info%%:*} path=${path_info#*:} if [[ $last_inode != $inode ]]; then last_inode=$inode path_to_keep=$path else printf "ln -s\t'$path_to_keep'\t'$path'\n" rm "$path" ln -s "$path_to_keep" "$path" fi done < <( find "$dir" -type f -links +1 ! -wholename '* *' -printf '%i:%p\n' | sort --field-separator=: ) # Warn about any excluded files # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ buf=$( find "$dir" -type f -links +1 -path '* *' ) if [[ $buf != '' ]]; then echo 'Some files not processed because their paths contained newline(s):'$'\n'"$buf" fi exit 0

  Read the article

• IIS6 Virtual Directory 500 Error on Remote Share

  - by David

  We have our servers at the server farm in a domain. Let's call it LIVE. Our developer computers live in a completely separate corporate domain, miles and miles away. Let's call it CORP. We have a large central storage unit (unix) that houses images and other media needed by many webservers in the server farm. The IIS application pools run as (let's say) LIVE\MediaUser and use those credentials to connect to a central storage share as a virtual directory, retrieve the images, and serve them as if they were local on each server. The problem is in development. On my development machine. I log in as CORP\MyName. My IIS 6 application pool runs as Network Service. I can't run it as a user from the LIVE domain because my machine isn't (and can not be) joined to that domain. I try to create a virtual directory, point it to the same network directory, click Connect As, uncheck the "Always use the authenticated user's credentials when validating access to the network directory" checkbox so that I can enter the login info, enter the credentails for LIVE\MediaUser, click OK, verify the password, etc. This doesn't work. I get "HTTP Error 500 - Internal server error" from IIS. The IIS log file reports sc-status = 500, sc-substatus = 16, and sc-win32-status = 1326. The documentation says this means "UNC authorization credentials are incorrect" and the Win32 status means "Logon failure: unknown user name or bad password." This would be all and good if it were anywhere close to accurate. I double- and trouble-checked it. Tried multiple known good logins. The IIS manager allows me to view the file tree in its window, it's only the browser that kicks me out. I even tried going to the virtual directory's Directory Security tab, and under Authentication and Access Control, I tried using the same LIVE domain username for the anonymous access credential. No luck. I'm not trying to run any ASP, ASP.NET, or other dynamic anything out of the virtual directory. I just want IIS to be able to load static images, css, and js files. If anyone has some bright ideas I would be most appreciative!

  Read the article

• OS X Snow Leopard 10.6 Refuses to Load Websites the first time intermittently

  - by Brandon

  Many times when I am browsing the web, Snow Leopard will sit and load a site for 20 seconds or more, until it times out and says it cannot be displayed. If I refresh, it loads RIGHT away, every time. The issue is intermittent but happens from once every couple of days to a few times a day. So the long and short of it is this: Aluminum MacBook (Non-Pro) 2.4GHz Core2Duo, 4GB DDR3 I am using 10.6.6 but I have had this issue since 10.6.0 It happens in Firefox, Chrome, and Safari I have flushed my DNS (using the command 'blablabla flush') I am using custom DNS servers which I hoped would fix it but it had no effect* I am running Apache currently but haven't been for most of the time I've reformatted multiple times, always experiencing the issue I am on Cox cable internet, with a Motorola Surfboard & a Belkin F6D4230-4 v1 (Pre?) N wireless router. I've put the router in G only & N only & G+N to no effect It seems to be domain dependant as I can sometimes load the Google cache right away, and sometimes other sites will load but Google will refuse My Powerbook G4 with Leopard, other Windows XP laptops, & my wired Win7 desktop do not suffer from the issue. *I recently started using these to escape the awful Cox redirect page on timeouts I'm almost positive the issue has happened on other networks but I can't recall a specific instance (I have a terrible memory). The problem is intermittent and fixable enough (I just have to wait until it times out and hit refresh one time) but incredibly annoying since I'm constantly reading documentation from a large variety of sites. EDIT: To clarify, this happens with ALL sites, not only specific sites. I haven't been able to detect any pattern to the failures, but one day Google.com will refuse to load while reddit.com will, and the next day vice versa. Keep in mind that waiting for a timeout and hitting refresh loads the page right away, every time. If I don't wait for the timeout, opening more links, hitting refresh, and clicking the link a billion times have no effect. It seems to be domain neutral, affecting sites seemingly at random. It doesn't seem to have anything to do with connection inactivity either, because I will be SSHed into different servers, uploading files, browsing, downloading, etc, and it will just quit loading Jquery.com (for example) until I sit and wait for a timeout. /EDIT This is my last resort. Please, someone, tell me what is happening. Thank you.

  Read the article

• Persistent Issues on small business network using Cisco 871W and Catalyst Express 500

  - by Ben Campbell

  Being the most qualified (read: still not qualified) to solve our persistant network issues, I've turned to serverfault for guidance. I've done some searching, reading related documentation on cisco.com and tried a bit of troubleshooting. Here is the config: 100mb synchronous connection from a business internet provider (tested multiple times at 100meg at the source) Cisco 871W wireless point & router is where the WAN connection starts (this serves all our wireless). The only wired connection in the 871W is the Catalyst switch listed below. Cisco Catalyst Express 500 (24TT) is where all the wired connections terminate. About 20 Windows workstations and servers (AD/Webservers only). Some services in EC2 including mail and other web servers/apps. I've been TOLD cabling internally should be gigabit-ready. Here are the problems: generally slow download rates from the internet to the desktop/laptop frequent "page cannot be displayed" errors in browsers-sometimes 3 or 4 reloads are necessary... often times CSS wont load or other content requiring the browser to connect to a different server. slow speed within the LAN from workstation to workstation copying files. I would expect extremely fast data transfer workstation to workstation / server to workstation in this simple network. Several things I need to admit: I'm not primarily a network guy. Funding is relatively low, I need to be the guy that finds the solution. I understand most of the terminology and most of the technology. Implementation is where I fail due to lack of experience. Getting to the point: I'm wondering whether experienced network admins think that our small network should be sufficiently served with our current hardware if configured properly... or if we should purchase new equipment and start fresh? If starting fresh is the plan, whatever that new equipment may be is a likely different question entirely. If I haven't provided enough information, I will happily do some troubleshooting and update with the results. I have experience using wireshark and some other tools. Please let me know what you think would be most helpful and thanks in advance. EDIT: I forgot to add that the Cisco applicance will not finish loading the SDM Express console. It hangs every time at the "populating modules... DHCP". It eventually crashes and closes. I've rebooted the hardware and this still happens.

  Read the article

• Slow Windows Explorer on Windows 7

  - by MadBoy

  I have Laptop with i7 (4 cores), 8GB ram and SSD OCZ Vertex 3 MaxIOPS which in testing that I did just now does 400mb/s+ read/write. However the responsiveness of Windows Explorer is far from being perfect. Opening up Computer, Documents, going into folders is very slow (1-5seconds). I don't have any viruses or spyware and I have tried changing properties to optimize view for General Items. I tried disabling Search Indexer but it made search in Outlook 2010 crawl and didn't bring any other effect. Even double clicking on file takes some time to open things up (like clicking a Word document). I don't have any drives mapped, my computer is not joined to domain. I have multiple VPN connections that I connect to but they all have disabled default gateways. I tried using CC Cleaner or some Windows 7 Tweaks app to disable some things. I am power user using Visual Studio, Tortoise SVN and other developer/administration apps. Any non obvious ideas? Edit: So I've been trying to pinpoint where the issue comes from and it seems that straight after reboot Windows Explorer opens very fast, when I load 3-4 programs (Royal TS, Visual Studio, Outlook) it's noticeably slower and the more programs I have it gets worse. After I start closing programs it starts working better and if I leave 2 open it's fast again. I tried doing some research with DiskMon and other programs from sysinternals but couldn't find anything suspicious. Below are stats during normal usage with a lots of programs open: - Ram usage with a lot of programs open and no swap file (i disabled it for testing): 6.95GB - CPU usage: 15%, none of the cores takes more then 50% (I have VS 2010 open x 4) HD Tune Pro: OCZ-VERTEX3 MI Benchmark Test capacity: full Read transfer rate Transfer Rate Minimum : 363.9 MB/s Transfer Rate Maximum : 505.5 MB/s Transfer Rate Average : Access Time : Burst Rate : CPU Usage : HD Tune Pro: OCZ-VERTEX3 MI File Benchmark Drive C: Transfer rate test File Size: 500 MB Sequential read 484102 KB/s Sequential write 444714 KB/s Random read 7779 IOPS Random write 16888 IOPS Random read (queue depth = 32) 73007 IOPS Random write (queue depth = 32) 69790 IOPS HD Tune Pro: OCZ-VERTEX3 MI Random Access Test capacity: full Read test Transfer size operations / sec avg. access time max. access time avg. speed 512 bytes 3260 IOPS 0.306 ms 2.106 ms 1.592 MB/s 4 KB 4161 IOPS 0.240 ms 2.006 ms 16.256 MB/s 64 KB 2382 IOPS 0.419 ms 2.367 ms 148.934 MB/s 1 MB 449 IOPS 2.225 ms 4.197 ms 449.407 MB/s Random 809 IOPS 1.235 ms 6.551 ms 410.527 MB/s HD Tune Pro: OCZ-VERTEX3 MI Extra Tests Test capacity: full Random seek 3975 IOPS 0.252 ms 1.941 MB/s Random seek 4 KB 4245 IOPS 0.236 ms 16.583 MB/s Butterfly seek 4086 IOPS 0.245 ms 1.995 MB/s Random seek / size 64 KB 3812 IOPS 0.262 ms 58.606 MB/s Random seek / size 8 MB 120 IOPS 8.348 ms 485.737 MB/s Sequential outer 4524 IOPS 0.221 ms 282.721 MB/s Sequential middle 4429 IOPS 0.226 ms 276.818 MB/s Sequential inner 5504 IOPS 0.182 ms 344.000 MB/s Burst rate 4472 IOPS 0.224 ms 279.475 MB/s

  Read the article

< Previous Page | 725 726 727 728 729 730 731 732 733 734 735 736  | Next Page >