Search Results

Search found 29159 results on 1167 pages for 'xml configuration'.

Page 730/1167 | < Previous Page | 726 727 728 729 730 731 732 733 734 735 736 737  | Next Page >

• Cannot Access Web Interface on HP 2510G

  - by Stephen

  I am currently setting up a new infrastructure with HP 2510s as edge switches and an HP E5406 as the main switch. I also have a DHCP and DNS server running on the same network. When i first set up one of my 2510 switches, I gave it a static IP through the console and then went to the web interface to continue my configuration. Later, I realized that I assigned it the wrong IP address, so i went through the web interface and changed the IP address to the correct one. Now, I can't access the web interface. I can telnet to the switch on the new IP address, but the web interface will not load. If I switch from static IP to DHCP, it loads the web interface. Any ideas on what could be causing the web server in the 2510 not to load with the new static IP address?

  Read the article

• SSH service will not start on fresh Cygwin 1.7.15 install

  - by Coder6841

  OS: Windows 7 x64 Cygwin: 1.7.15-1 OpenSSH: 6.0p1-1 I'm attempting to install an SSH server on Windows 7. The tutorial that I'm following to do this is here: http://www.howtogeek.com/howto/41560/how-to-get-ssh-command-line-access-to-windows-7-using-cygwin/ The issue is that upon executing the net start sshd command I get the following output:The CYGWIN sshd service is starting. The CYGWIN sshd service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534. Here is the full output of the setup: AdminUser@ThisComputer ~ $ ssh-host-config *** Info: Generating /etc/ssh_host_key *** Info: Generating /etc/ssh_host_rsa_key *** Info: Generating /etc/ssh_host_dsa_key *** Info: Generating /etc/ssh_host_ecdsa_key *** Info: Creating default /etc/ssh_config file *** Info: Creating default /etc/sshd_config file *** Info: Privilege separation is set to yes by default since OpenSSH 3.3. *** Info: However, this requires a non-privileged account called 'sshd'. *** Info: For more info on privilege separation read /usr/share/doc/openssh/README.privsep. *** Query: Should privilege separation be used? (yes/no) yes *** Info: Note that creating a new user requires that the current account have *** Info: Administrator privileges. Should this script attempt to create a *** Query: new local account 'sshd'? (yes/no) yes *** Info: Updating /etc/sshd_config file *** Query: Do you want to install sshd as a service? *** Query: (Say "no" if it is already installed as a service) (yes/no) yes *** Query: Enter the value of CYGWIN for the daemon: [] *** Info: On Windows Server 2003, Windows Vista, and above, the *** Info: SYSTEM account cannot setuid to other users -- a capability *** Info: sshd requires. You need to have or to create a privileged *** Info: account. This script will help you do so. *** Info: You appear to be running Windows XP 64bit, Windows 2003 Server, *** Info: or later. On these systems, it's not possible to use the LocalSystem *** Info: account for services that can change the user id without an *** Info: explicit password (such as passwordless logins [e.g. public key *** Info: authentication] via sshd). *** Info: If you want to enable that functionality, it's required to create *** Info: a new account with special privileges (unless a similar account *** Info: already exists). This account is then used to run these special *** Info: servers. *** Info: Note that creating a new user requires that the current account *** Info: have Administrator privileges itself. *** Info: No privileged account could be found. *** Info: This script plans to use 'cyg_server'. *** Info: 'cyg_server' will only be used by registered services. *** Query: Do you want to use a different name? (yes/no) no *** Query: Create new privileged user account 'cyg_server'? (yes/no) yes *** Info: Please enter a password for new user cyg_server. Please be sure *** Info: that this password matches the password rules given on your system. *** Info: Entering no password will exit the configuration. *** Query: Please enter the password: *** Query: Reenter: *** Info: User 'cyg_server' has been created with password '[CENSORED]'. *** Info: If you change the password, please remember also to change the *** Info: password for the installed services which use (or will soon use) *** Info: the 'cyg_server' account. *** Info: Also keep in mind that the user 'cyg_server' needs read permissions *** Info: on all users' relevant files for the services running as 'cyg_server'. *** Info: In particular, for the sshd server all users' .ssh/authorized_keys *** Info: files must have appropriate permissions to allow public key *** Info: authentication. (Re-)running ssh-user-config for each user will set *** Info: these permissions correctly. [Similar restrictions apply, for *** Info: instance, for .rhosts files if the rshd server is running, etc]. *** Info: The sshd service has been installed under the 'cyg_server' *** Info: account. To start the service now, call `net start sshd' or *** Info: `cygrunsrv -S sshd'. Otherwise, it will start automatically *** Info: after the next reboot. *** Info: Host configuration finished. Have fun! AdminUser@ThisComputer ~ $ net start sshd The CYGWIN sshd service is starting. The CYGWIN sshd service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534. Note that on the line *** Query: Enter the value of CYGWIN for the daemon: [] I haven't entered anything. Tutorials often say to use ntsec or ntsec tty here but those options are removed from the latest version of OpenSSH. I've tried using them anyway and the result is the same. The file /var/log/sshd.log is empty. If I try just running the command /usr/sbin/sshd I get the output /var/empty must be owned by root and not group or world-writable.. The /var/empty directory has the following permissions: drwxr-xr-x+ 1 cyg_server root 0 May 29 15:28 empty. Google searches on this error did not turn up any working fixes. One person seems to have solved it by using the command chown SYSTEM /var/empty but that did not fix it in my case.

  Read the article

• not able to upgrade maas to 1.4?

  - by SaM

  I am running ubuntu 13.04 LTS, and maas version runnung is maas 1.3+bzr1470+dfsg-0+1474+175~ppa0~ubuntu13.04.1, so i'm trying to upgrade it to mass 1.4 but its failing, sam@xsmaas01:~$ sudo apt-get install maas [sudo] password for sam: Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be upgraded: maas 1 upgraded, 0 newly installed, 0 to remove and 87 not upgraded. 2 not fully installed or removed. Need to get 0 B/1,912 B of archives. After this operation, 1,024 B of additional disk space will be used. (Reading database ... 85268 files and directories currently installed.) Preparing to replace maas 1.3+bzr1470+dfsg-0+1474+175~ppa0~ubuntu13.04.1 (using .../maas_1.4+bzr1693+dfsg-0ubuntu2~ctools0_all.deb) ... Unpacking replacement maas ... Setting up maas-cluster-controller (1.4+bzr1693+dfsg-0ubuntu2~ctools0) ... ERROR: Module version does not exist! dpkg: error processing maas-cluster-controller (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of maas: maas depends on maas-cluster-controller; however: Package maas-cluster-controller is not configured yet. dpkg: error processing maas (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: maas-cluster-controller maas E: Sub-process /usr/bin/dpkg returned an error code (1) sam@maas01:~$ Can anyone help me with this?

  Read the article

• Should `keepalive_timeout` be removed from Nginx config?

  - by Bryson

  Which is the better configuration/optimization: to explicitly limit the keepalive_timeout or to allow Nginx to kill keepalive connections on its own? I have seen two conflicting recommendations regarding the keepalive_timeout directive for Nginx. They are as follows: # How long to allow each connection to stay idle; longer values are better # for each individual client, particularly for SSL, but means that worker # connections are tied up longer. (Default: 65) keepalive_timeout 20; and # You should remove keepalive_timeout from your formula. # Nginx closes keepalive connections when the # worker_connections limit is reached. The Nginx documentation for keepalive_timeout makes no mention of the automatic killing, and I have only seen this recommendation once, but it intrigues me. This server serves exclusively TLS-secured connections, and all non-encrypted connections are immediately rerouted to the https:// version of the same URL.

  Read the article

• /lib/udev/net.agent causing high CPU usage

  - by Antoine Benkemoun

  We have a number of Soekris boxes running Debian Squeeze. They were installed through an automated process consisting of using deboostrap and copying it unto a Compact Flash card. We use puppet to manage the configuration of all these boxes. Before Debian Squeeze, they were running Voyage Linux which is just a "lighter" version of Debian. Since we have switched, we're seeing the /lib/udev/net.agent process take up an aweful lot of CPU. We have so far been unable to find any clue as to what this really does and why it's taking up some much CPU time. In htop we see the following : We are seeing absolutly no syslog messages related to this process so we're a bit lost... So, I am looking for pointers as to what this process does in general and what could be the potential cause of such CPU usage.

  Read the article

• Should a webserver in the DMZ be allowed to access MSSQL in the LAN?

  - by Allen

  This should be a very basic question and I tried to research it and couldn't find a solid answer. Say you have a web server in the DMZ and a MSSQL server in the LAN. IMO, and what I've always assumed to be correct, is that the web server in the DMZ should be able to access the MSSQL server in the LAN (maybe you'd have to open a port in the firewall, that'd be ok IMO). Our networking guys are now telling us that we can't have any access to the MSSQL server in the LAN from the DMZ. They say that anything in the DMZ should only be accessible FROM the LAN (and web), and that the DMZ should not have access TO the LAN, just as the web does not have access to the LAN. So my question is, who is right? Should the DMZ have access to/from the LAN? Or, should access to the LAN from the DMZ be strictly forbidden. All this assumes a typical DMZ configuration.

  Read the article

• Redmine on Redhat/CentOS 5 Without using virtual hosts

  - by flyclassic

  I've have followed all the steps to install Redmine on CentOS 5, except for the Apache part: http://www.redmine.org/projects/redmine/wiki/HowTo_install_Redmine_on_CentOS_5 I do not want to configure a virtualhost as we are not using virtual hosts. Can I configure Redmine to run with http://hostname/redmine? Apparently it doesn't work for my case. Redmine was extracted in to the webserver document root /var/www/html/ called /var/www/html/redmine What I did was added a redmine.conf to /etc/httpd/conf.d/ with the following configuration and restarted the server: <Location "/redmine"> Options Indexes ExecCGI FollowSymLinks -MultiViews Order allow,deny Allow from all AllowOverride all PassengerEnabled On RailsBaseURI /var/www/html/redmine RailsEnv production </Location> now i got this error Further information about the error may have been written to the application's log file. Please check it in order to analyse the problem. Error message: No such file or directory - config/environment.rb Exception class: Errno::ENOENT Application root: /var/www/html Where have I gone wrong?

  Read the article

• How do I set up live audio streams to a DLNA compliant device?

  - by Takkat

  Is there a way to stream the live output of the soundcard from our 12.04.1 LTS amd64 desktop to a DLNA-compliant external device in our network? Selecting media content in shared directories using Rygel, miniDLNA, and uShare is always fine - but so far we completely failed to get a live audio stream to a client via DLNA. Pulseaudio claims to have a DLNA/UPnP media server that together with Rygel is supposed to do just this. But we were unable to get it running. We followed the steps outlined in live.gnome.org, this answer here, and also in another similar guide. As soon as we select the local audio device, or our GST-Launch stream in the DLNA client Rygel displays the following message and the client states it reached the end of the playlist: (rygel:7380): Rygel-WARNING **: rygel-http-request.vala:97: Invalid seek request This is how we configured GST-Launch in rygel.conf: [GstLaunch] enabled=true launch-items=mypulseaudiosink mypulseaudiosink-title=Audio on @HOSTNAME@ mypulseaudiosink-mime=audio/x-wav mypulseaudiosink-launch=pulsesrc device=<device> ! wavpackenc For <device> we tried with the default sink name, this name appended with .monitor, and in addition with upnp-sink and upnp.monitor that was created when we selected DLNA media server from paprefs. We also tried to encode using lamemp3enc with no luck. These are our pulseaudio modules: http://paste.ubuntu.com/1202913/ These are our sinks: http://paste.ubuntu.com/1202916/ Did we miss any other additional configuration needed to get this running? Are there any other alternatives for sending the audio of our soundcard as live stream to a DLNA client?

  Read the article

• vsftpd: chroot_local_user causes GNU/TLS-error

  - by akrosikam

  Distro: Ubuntu 12.04.2 Server 32-bit Server client: vsftpd 2.3.5 (from default "main" repository) Problem: Since upgrading from Ubuntu 10.04 to Ubuntu 12.04 (nothing changed on client-side), vsftp has refused to make chroot-jails with the "chroot_local_user" directive on FTP(e/i)S-connections. Here's my vsftpd.conf: anonymous_enable=NO local_enable=YES write_enable=YES local_umask=022 dirmessage_enable=YES xferlog_enable=YES xferlog_std_format=YES ftpd_banner=How are you gentlemen. listen=YES pam_service_name=vsftpd userlist_enable=YES userlist_deny=NO tcp_wrappers=YES connect_from_port_20=YES ftp_data_port=20 listen_port=21 pasv_enable=YES pasv_promiscuous=NO pasv_min_port=4242 pasv_max_port=4252 pasv_addr_resolve=YES pasv_address=your.domain.com ssl_enable=YES allow_anon_ssl=NO force_local_logins_ssl=YES force_local_data_ssl=YES ssl_tlsv1=YES ssl_sslv2=NO ssl_sslv3=NO rsa_cert_file=/home/maw/ssl_ftp_test/vsftpd.pem rsa_private_key_file=/home/maw/ssl_ftp_test/vsftpd.pem debug_ssl=YES log_ftp_protocol=YES ssl_ciphers=HIGH chroot_local_user=NO How to reproduce: Have a working SSL/TLS-secured vsftpd-configuration (I suggest similar to the one above) ready. Try to connect with an FTP user client and upload some files. With my setup, the above listed config works well at this point. Edit /etc/vsftpd.conf and set chroot_local_user= to YES. Make sure that chroot_list_enable= and/or chroot_list_file= are not set. Comment them out if they are. Save and exit. Run sudo restart vsftpd (or sudo service vsftpd restart if you like) in a terminal. Try to connect with an FTP user client. You should see a message more or less like this: GnuTLS error -15: An unexpected TLS packet was received. This is an issue for me, as I do not want FTP-sessions to be able to list files outside the user's home folder. I have checked with several client-side apps, and I get the same results with every one of them. Filezilla is not so good regarding cipher methods nowadays, but as I am able to make an FTP(e)s-connection over TLS (as long as chroot'ing is disabled and ssl_ciphers is set to HIGH) I have a feeling ciphers are not the issue this time, and that I won't find the answer by tweaking configs on the client side. My vsftpd.log stays empty, even though debug_ssl and log_ftp_protocol are enabled, so no info there either.

  Read the article

• Slow NFS transfer performance of small files

  - by Arie K

  I'm using Openfiler 2.3 on an HP ML370 G5, Smart Array P400, SAS disks combined using RAID 1+0. I set up an NFS share from ext3 partition using Openfiler's web based configuration, and I succeeded to mount the share from another host. Both host are connected using dedicated gigabit link. Simple benchmark using dd: $ dd if=/dev/zero of=outfile bs=1000 count=2000000 2000000+0 records in 2000000+0 records out 2000000000 bytes (2.0 GB) copied, 34.4737 s, 58.0 MB/s I see it can achieve moderate transfer speed (58.0 MB/s). But if I copy a directory containing many small files (.php and .jpg, around 1-4 kB per file) of total size ~300 MB, the cp process ends in about 10 minutes. Is NFS not suitable for small file transfer like above case? Or is there some parameters that must be adjusted?

  Read the article

• ClearOS - how to avoid getting stuck at a fsck message at boot?

  - by Scott Szretter

  I have had this happen a couple times - I have a ClearOS Enterprise 5.2 box, and due to a power outage or similar, it ends up showing an error at boot and saying that fsck needs to be run (I think it said with (or without?) the -a parameter). The problem is, I need this box to be headless, at a remote location (miles away)! SO, I need to come up with a solution on how to either have it automatically repair itself, without someone to be present with a monitor and keyboard. Another possibility is to simply avoid the issue all together - maybe there is something that can be changed so it's very unlikely to happen (I am unable to avoid the power outage of course - at least not practically). Finally, maybe it can be boot off a read only media (cd) or file system or similar? At least the base OS, so that it would always at least boot with enough configuration that might allow remote access, or basic connectivity?

  Read the article

• set virtual host on Apache2.2 and PHP 5.3

  - by Avinash

  Hi I want to set my Virtual host on Apache 2.2. So, I can access my site using my IP address and Port number. Like http://192.168.101.111:429 for one site, http://192.168.101.111:420 for other site and so on. My machine OS in Windows 7. I have tried below in my httpd.conf file. Listen 192.168.101.83:82 #chaffoteaux <Directory "Path to project folder"> AllowOverride All </Directory> <VirtualHost 192.168.101.83:82> ServerAdmin [email protected] DirectoryIndex index.html index.htm index.php index.html.var DocumentRoot "Path to project folder" #ServerName dummy-host.example.com ErrorLog logs/Zara.log #ErrorLog logs/dummy-host.example.com-error_log #CustomLog logs/dummy-host.example.com-access_log common </VirtualHost> Can you please suggest any thing missing in my configuration. Thanks in advance Avinash

  Read the article

• Exchange 2010 PST-Export fails

  - by Chake

  I'm horribly failing at exporting Exchnange Mailboxes to PST files. Perhaps You are able to help me? The System I'm running some legacy machines here. The one I'm currently working on (CurrentDC) is a Windows 2008 R2 Server with Exchange 2010 on it. Exchange seems to be poorly patched: [PS] C:\>get-exchangeserver Name Site ServerRole Edition AdminDisplayVersion ---- ---- ---------- ------- ------------------- OldDC None Enterprise Version 6.5 (Bui... CurrentDC company.local Mailbox,... Enterprise Version 14.0 (Bu... The Problem After some trouble I managed to get the Export-Mailbox command run: [PS] C:\>Export-Mailbox -Identity marco -PSTFolderPath C:\ExchangeExport According to several Websites that seems to be the right command to export the mailbox of the user "marco" to "C:\ExchangeExport". But after running the command an error occurs (I'm sorry, it is the german version of Windows 2008 - but if you translate Fehler with error and Vorgang with process you should be prepared enough to go ;)) [PS] C:\Export-Mailbox -Identity marco -PSTFolderPath C:\ExchangeExport Fehler für Marco S ([email protected]). Ursache: Fehler bei diesem Vorgang., Fehlercode: -2147467259. + CategoryInfo : InvalidOperation: (0:Int32) [Export-Mailbox], RecipientTaskException + FullyQualifiedErrorId : 2317FD3A,Microsoft.Exchange.Management.RecipientTasks.ExportMailbox RunspaceId : 44415363-371e-44a1-a682-61e6a9b90c86 Identity : company.local/Company User/Marco S DistinguishedName : CN=Marco S,OU=Company User,DC=company,DC=local DisplayName : Marco S Alias : marco LegacyExchangeDN : /o=Erste Organisation/ou=Erste administrative Gruppe/cn=Recipients/cn=marco PrimarySmtpAddress : [email protected] SourceServer : CurrentDC.company.local SourceDatabase : Mailbox Database 0279110169 SourceGlobalCatalog : CurrentDC SourceDomainController : TargetGlobalCatalog : CurrentDC TargetDomainController : TargetMailbox : TargetServer : TargetDatabase : MailboxSize : 0 B (0 bytes) IsResourceMailbox : False SIDUsedInMatch : SMTPProxies : SourceManager : SourceDirectReports : SourcePublicDelegates : SourcePublicDelegatesBL : SourceAltRecipient : SourceAltRecipientBL : SourceDeliverAndRedirect : MatchedTargetNTAccountDN : IsMatchedNTAccountMailboxEnabled : MatchedContactsDNList : TargetNTAccountDNToCreate : TargetManager : TargetDirectReports : TargetPublicDelegates : TargetPublicDelegatesBL : TargetAltRecipient : TargetAltRecipientBL : TargetDeliverAndRedirect : Options : Default SourceForestCredential : TargetForestCredential : TargetFolder : PSTFilePath : C:\ExchangeExport\marco.pst RecoveryMailboxGuid : RecoveryMailboxLegacyExchangeDN : RecoveryMailboxDisplayName : RecoveryDatabaseGuid : StandardMessagesDeleted : 0 AssociatedMessagesDeleted : 0 DumpsterMessagesDeleted : 0 MoveType : ExportToPST MoveStage : Validation StartTime : 05.10.2012 13:55:46 EndTime : 05.10.2012 13:55:46 StatusCode : -2147467259 StatusMessage : Fehler bei diesem Vorgang. ReportFile : C:\Program Files\Microsoft\Exchange Server\V14\Logging\MigrationLogs\export-Mailbox20121005-135545-8170000.xml ServerName : CurrentDC.company.local What I have done Well, I must say I'm quite clueless. I was wondering why MailboxSize is 0 - so I checked it: [PS] C:\>Get-MailboxStatistics marco | ft DisplayName, TotalItemSize, ItemCount DisplayName TotalItemSize ItemCount ----------- ------------- --------- Marco S 473 MB (496,011,572 bytes) 4173 Well, this i not 0 bytes - but I don't know what to do with this information. Also I had a look at the ReportFile mentioned in the output: <?xml version="1.0"?> <export-Mailbox> <TaskHeader> <RunningAs>NT-AUTORITÄT\SYSTEM</RunningAs> <Name>export-Mailbox</Name> <Type>ExportToPST</Type> <MaxBadItems>0</MaxBadItems> <Version>14.0.639.21</Version> <StartTime>10.05.2012 14:19:12</StartTime> <Options Identity="marco" PSTFolderPath="C:\ExchangeExport" DeleteContent="False" DeleteAssociatedMessages="False" GlobalCatalog="CurrentDC" MaxThreads="4" BadItemLimit="0" ValidateOnly="False" IncludeFolders="" ExcludeFolders="" StartDate="01.01.0001 00:00:00" EndDate="31.12.9999 23:59:59" SubjectKeywords="" ContentKeywords="" AllContentKeywords="" AttachmentFilenames="" SenderKeywords="" RecipientKeywords="" Locale="" /> </TaskHeader> <TaskDetails> <Item MailboxName="Marco S"> <Source> <Identity>company.local/Company User/Marco S</Identity> <DistinguishName>CN=Marco Sc,OU=Company User,DC=company,DC=local</DistinguishName> <DisplayName>Marco S</DisplayName> <Alias>marco</Alias> <LegacyExchangeDN>/o=Erste Organisation/ou=Erste administrative Gruppe/cn=Recipients/cn=marco</LegacyExchangeDN> <PrimarySmtpAddress>[email protected]</PrimarySmtpAddress> <SourceServer>CurrentDC.company.local</SourceServer> <SourceDatabase>Mailbox Database 0279110169</SourceDatabase> <IsResourceMailbox>False</IsResourceMailbox> <SourceGlobalCatalog>CurrentDC</SourceGlobalCatalog> </Source> <Target> <PSTFilePath>C:\ExchangeExport\marco.pst</PSTFilePath> </Target> <MailboxSize>0 B (0 bytes)</MailboxSize> <Duration>00:00:00</Duration> <Result IsWarning="False" ErrorCode="-2147467259">Fehler bei diesem Vorgang.</Result> </Item> </TaskDetails> <TaskFooter> <EndTime>10.05.2012 14:19:13</EndTime> <TotalSize>0 B (0 bytes)</TotalSize> <StandardMessagesDeleted>0</StandardMessagesDeleted> <AssociatedMessagesDeleted>0</AssociatedMessagesDeleted> <DumpsterMessagesDeleted>0</DumpsterMessagesDeleted> <Result ErrorCount="1" CompletedCount="0" WarningCount="0" /> </TaskFooter> </export-Mailbox> Do you have any clue? <UPDATE> Regarding to the answer from downthepub I tried to use UNC paths - no change. Also I tried installing the management tools to a client and run the scripts from there - no way, too. </UPDATE> Thanks a lot for reading this mess!

  Read the article

• emca fails with "Database instance is unavailable" though available

  - by Giri Mandalika

  The following example shows the symptoms of failure, and the exact error message. $ emca -repos create ... Password for SYSMAN user: Do you wish to continue? [yes(Y)/no(N)]: Y Nov 19, 2012 10:33:42 AM oracle.sysman.emcp.DatabaseChecks \ checkDbAvailabilityImpl WARNING: ORA-01034: ORACLE not available Nov 19, 2012 10:33:42 AM oracle.sysman.emcp.DatabaseChecks \ throwDBUnavailableException SEVERE: Database instance is unavailable. Fix the ORA error thrown and run EM Configuration Assistant again. Some of the possible reasons may be : 1) Database may not be up. 2) Database is started setting environment variable ORACLE_HOME with trailing '/'. Reset ORACLE_HOME and bounce the database. For eg. Database is started setting environment variable ORACLE_HOME=/scratch/db/ . Reset ORACLE_HOME=/scratch/db and bounce the database. Fix: Ensure that the ORACLE_HOME is pointing to the right location in $ORACLE_HOME/bin/emca file. Rather than installing from scratch, if ORACLE_HOME was copied over from another location, likely it results in wrong location for ORACLE_HOME in several Enterprise Manager (EM) specific scripts and files. It usually happens when the directory structure on the target machine is not identical to the structure on the original/source machine, including the top level directory location where Oracle RDBMS was installed properly using the installer.

  Read the article

• SmartSVN - Unable to create new repository profile

  - by Sandeepan Nath

  I have just installed SmartSVN on this fedora system. The application starts (on running ./smartsvn.sh) with its usual UI but many things are not working. Creating New repository profile Trying to create a new repository profile (Repositories- Repository Profiles- Add) An Error occurred while processing an SVN command - Cannot connect to 'svn+ssh://192.168.0.103': There was a problem while connecting to 192.168.0.103:22 Quick Checkout Trying to do Quick Checkout (less configuration) An Error occurred while processing an SVN command - Malformed XML. Some Observations When I run the smartsvn.sh file like this:- ./smartsvn.sh It shows this in the console - Warning: /bin/java does not exist Could not lock /root/.smartsvn/_lock_ Switched to running instance I was using SmartSVN in another system before this where it was working. There too, it was showing the warning like Warning: /bin/java does not exist but this part was not showing:- Could not lock /root/.smartsvn/_lock_ Switched to running instance I have only JRE installed in both the systems and not JDK. So, what could be the reason? Any pointers? Thanks, Sandeepan

  Read the article

• Is this a common/bug on this PPPoE setting for Cisco ASA 5505?

  - by DCAlliances

  We have to change the way the firewall setup due to we've changed the internet provider. The way we setup we have ADSL modem and we have to do a full bridge mode and the firewall configuration has to change from Static IP to Use PPPoE option on Outside interface with PPPoE username and password, CHAP authentication, WAN IP and WAN subnet mask. [See the attachment] It's been working ok with the use of PPPoE option however the issue is that if we un-plug the power cable of the firewall. This "Outside" interface turned to blank - NO WAN IP, PPPoE username and password. So basically, we have to retype this information again. Is this common or a bug? Any ideas? Thanks

  Read the article

• How to configure Linux to open files by extension?

  - by Gregory MOUSSAT

  The various Linux's desktops open files according to their mime type. This is a very nice feature but I also need to open them by extension (as with Windows). For instance, I want to open every xxxxx.vnc files with a specific program when I double-click on them. I use xfce but I don't think it differs from Gnome or KDE because all of them use the same configuration files (defaults.list and mimeapps.list). If possible the settings are user specific, not system wide. I've found some very poor informations about that, and all are system wide, so may be wiped out by some updates.

  Read the article

• Can't log in using sa account for sql server 2008

  - by tessa

  I installed SQL Server 2008. During the install I set it to mixed mode authentication and set the password for what I assume is the sa account. In the configuration manager I set tcp/ip and named pipes to enabled. When I open SQL Server Management Studio and try to log in - username: sa, password: whatIjustsetintheinstall, it fails with the error: Login failed for user sa. (error 18456). The error in Event Viewer is - Login failed for user 'sa'. Reason: Password did not match that for the login provided. [CLIENT: <local machine>]. I know the password is right because I just set it. What am I doing wrong here? Is sa not the right user to be logging in with mixed mode? I've been reading through forum after forum but just cannot find anything that works.

  Read the article

• Nginx & Passenger - failed (11: Resource temporarily unavailable) while connecting to upstream

  - by Toby Hede

  I have an Nginx and Passenger setup that is proving problematic. At relatively low loads the server seems to get backed up and start churning results like this into the error.log: connect() to unix:/passenger_helper_server failed (11: Resource temporarily unavailable) while connecting to upstream My passenger setup is: passenger_min_instances 2; passenger_pool_idle_time 1200; passenger_max_pool_size 20; I have done some digging, and it looks like the CPU gets pegged. Memory usage seems fine passenger_memory_stats shows at most about 700MB being used, but CPU approaches 100%. is this enough to cause this type of error? Should i bring the pool size down? Are there other configuration settings I should be looking at? Any help appreciated Other pertinent information: Amazon EC2 Small Instance Ubuntu 10.10 Nginx (latest stable) Passenger (latest stable) Rails 3.0.4

  Read the article

• BizTalk 2009 - The Community ODBC Adapter: Installation

  - by Stuart Brierley

  I have previsouly detailed the installation of MySQL, the configuration of MySQL and the installation of the ODBC Data Connector for MySQL.  The reason I needed to install and configure these servers was to provide a test environment for a BizTalk Server 2009 solution I am working on where BizTalk will be querying and populating a MySQL database. To do this I then needed to install and add the Community ODBC adapter from Two Connect: "The Community BizTalk Adapter for ODBC is based on the code that was first made available on GotDotNet a few years ago. TwoConnect has refreshed this code, added an installer, and tested it against the latest BizTalk editions. We are releasing the updates back to the BizTalk developer, user and partner community as part of our ongoing community intitiatives. This is the second adapter package that TwoConnect makes available to the community after the very succesful release of the BizTalk WSE 3 adapter a couple of years ago. This adapter is useful in all ODBC based integration scenarios. The following are the new features added and fixes made to the old code base on GotDotNet." Detailed below are the installation instructions for this adapter.  Downloading and running the installer will load up the splash screen. Next you need to select the installation location for the adapter. You then need to confirm the installation following which you will be shown the installation progress. Assuming all has gone well you should see the installation complete screen. Once the installation has completed successfully you will then need to add the adapter to your BizTalk Server.  To do this open the BizTalk Administration console, expand the Platform Settings and right click on Adapters then select New\Adapter. You should then be able to select the ODBC adapter and choose the display name for the adapter. This adapter will then be shown in the BizTalk Administration console. Next I will be looking at using the ODBC Adapter when: Generating schemas Creating a receive port Creating a send port

  Read the article

• How do I stop Gimp from autolaunching on startup?

  - by Joshua Fox

  Gimp launches every time I log into Xubuntu (v. 13.10). Gimp is not shown under Settings Manager- Sessions and startup. It does not appear in ~/.config/autostart. I immediately close Gimp in these cases, so it is not running when I shut down the session. How do I stop Gimp from autolaunching on startup? Diagnostic Info: Note that cd / find . -name gimp.desktop Only produces ./usr/share/applications/gimp.desktop and nothing else Here is the output of grep -lIr 'gimp' ~/ ~/Gimp-search-results.txt sbin/vgimportclone home/joshua/.gimp-2.8/controllerrc home/joshua/.gimp-2.8/tags.xml home/joshua/.gimp-2.8/dockrc home/joshua/.gimp-2.8/gimprc home/joshua/.gimp-2.8/themerc home/joshua/.gimp-2.8/templaterc home/joshua/.gimp-2.8/gtkrc home/joshua/.gimp-2.8/sessionrc home/joshua/.gimp-2.8/toolrc home/joshua/.gimp-2.8/pluginrc home/joshua/.gimp-2.8/menurc home/joshua/Gimp-search-results.txt home/joshua/.local/share/ristretto/mime.db home/joshua/.wine/drive_c/windows/system32/gecko/1.4/wine_gecko/dictionaries/en-US.dic home/joshua/.wine/drive_c/windows/syswow64/gecko/1.4/wine_gecko/dictionaries/en-US.dic home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,skype,,0495938f41334883bd3a67d3b164c1d1 home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,gnome-utils,,91bba9b826fb21dbfc3aad6d3bd771cb home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,icedtea-plugin,,7bb5e4ad0469ef8277032c048b9d7328 home/joshua/.cache/software-center/piston-helper/reviews.ubuntu.com,reviews,api,1.0,review-stats,any,any,,1c66e24123164bb80c4253965e29eed7 home/joshua/.cache/software-center/piston-helper/rec.ubuntu.com,api,1.0,recommend_app,wine1.4,,2bac05a75dcec604ee91e58027eb4165 home/joshua/.cache/software-center/piston-helper/software-center.ubuntu.com,api,2.0,applications,en,ubuntu,saucy,amd64,,32b432ef7e12661055c87e3ea0f3b5d5 home/joshua/.cache/software-center/apthistory.p home/joshua/.cache/software-center/reviews.ubuntu.com_reviews_api_1.0_review-stats-pkgnames.p home/joshua/.cache/oneconf/861c4e30b916e750f16fab5652ed5937/package_list_861c4e30b916e750f16fab5652ed5937 home/joshua/.cache/sessions/xfwm4-23e853443-fb4b-42fd-aa61-33fa99fdc12c.state home/joshua/.cache/sessions/xfce4-session-athena:0 home/joshua/.config/abiword/profile

  Read the article

• SQLAuthority News – Download Whitepaper – SQL Server 2008 R2 Analysis Services Operations Guide

  - by pinaldave

  SQL Server Analysis Service (SSAS) has been always interesting subject for research. Analysis Services cubes are a very powerful tool in the hands of the business intelligence (BI) developer. They provide an easy way to expose even large data models directly to business users. Microsoft has published very informative white paper on Analysis Services Operations Guide. This white paper is authored by Thomas Kejser, John Sirmon, and Denny Lee. In this guide you will find information on how to test and run Microsoft SQL Server Analysis Services in SQL Server 2005, SQL Server 2008, and SQL Server 2008 R2 in a production environment. The focus of this guide is how you can test, monitor, diagnose, and remove production issues on even the largest scaled cubes. This paper also provides guidance on how to configure the server for best possible performance. It is the goal of this guide to make your operations processes as painless as possible, and to have you run with the best possible performance without any additional development effort to your deployed cubes. In this guide, you will learn how to get the best out of your existing data model by making changes transparent to the data model and by making configuration changes that improve the user experience of the cube. Download SQL Server 2008 R2 Analysis Services Operations Guide Note: Abstract taken white paper. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Download, SQL Query, SQL Server, SQL Tips and Tricks, SQL White Papers, SQLAuthority News, T SQL, Technology

  Read the article

• How to enable extended logging for classic asp on IIS7 on Windows 2008 R2

  - by Neil Trodden

  I had to deploy an application that was not written by me onto the above configuration. It is a rather bizarre hybrid of asp.net and classic asp and it's the classic asp that is proving troublesome. The client is having problems with 500 Internal Server Errors appearing and I can see some of these in the logs but I only get the error code and the page name but little else. What I would like to see is the actual error message to at least give me an idea what is going on (or not going on, depending on your point of view) I don't want to display errors in the browser as I don't know the code well enough and this could (for all I know) display some crazy code where the db password is hard-coded into the site.

  Read the article

• How do I configure multiple domain names on my IIS server?

  - by Dillie-O

  We have a few websites that we are running on one instance of IIS that need to be mapped for each of their domain names. For example. Site A has the domain name coolness.com Site B has the domain name 6to8Weeks.com Site C has the domain name PhatTech.com When I look at the "Web Site Identification" section of the IIS configuration window, I notice that I can specify an IP address and port, but if I click the Advanced button, I can also configure the site based on host header values as well. How do I configure each site in IIS? Ideally I would like them to all be able to listen to port 80, so I don't have weird URLs, but I'm not sure if I do this using headers, IP addresses, both, or something else.

  Read the article

• Trouble installing php memcache extension

  - by 2020vert

  I'm trying to install memcache on MAMP but I get the warning below, and when I continue it seems to complete properly. I add the line extension=memcache.so to the php.ini and restart MAMP but phpinfo() doesn't list the memcache extension. $ ./pecl install memcache downloading memcache-2.2.5.tgz ... Starting to download memcache-2.2.5.tgz (35,981 bytes) ..........done: 35,981 bytes 11 source files, building WARNING: php_bin /Applications/MAMP/bin/php5/bin/php appears to have a suffix 5/bin/php, but config variable php_suffix does not match running: phpize Configuring for: PHP Api Version: 20041225 Zend Module Api No: 20060613 Zend Extension Api No: 220060519 Enable memcache session handler support? [yes] : yes ... Build process completed successfully Installing '/Applications/MAMP/bin/php5/lib/php/extensions/no-debug-non-zts-20060613/memcache.so' install ok: channel://pecl.php.net/memcache-2.2.5 configuration option "php_ini" is not set to php.ini location You should add "extension=memcache.so" to php.ini

  Read the article

< Previous Page | 726 727 728 729 730 731 732 733 734 735 736 737  | Next Page >