Search Results

Search found 22480 results on 900 pages for 'internet archive'.

Page 732/900 | < Previous Page | 728 729 730 731 732 733 734 735 736 737 738 739  | Next Page >

• Backup/Multihomed network connection

  - by J_P

  We have a couple locations that require 24/7 access to Internet and our current provider (AT&T) while mostly good is not always up. My concern would be if I go with another provider (for example Comcast) I'm going to be subject to the same down time if it's in the "last mile". I for the most part don't know where the failure points are on the ISP side but I would imagine the large majority are within the last mile. I'd looked at Mifi or similar solution but have concerns about bandwidth caps and overall speed. Any suggestions would be appreciated.

  Read the article

• Secondary fallback/failover network on Cisco ASA

  - by tyranitar

  In my network there is a Cisco ASA 55x0 with "inside" interface (network 192.168.79.0/24) and "outside" interface (network 89.x.x.48/29) There is this nat rule: object network NAToutside nat (inside,outside) dynamic interface and the static route route outside 0.0.0.0 0.0.0.0 89.x.x.49 1 and all ACL rules. Now I have another new outside network by another ISP called "outside2", this network is already natted and the Cisco ASA in in the network 192.168.70.0/24. I would use this network as a fallback one. So I set the nat rule: object network NAToutside2 nat (inside,outside2) dynamic interface and the static route with a different metric route outside2 0.0.0.0 0.0.0.0 192.168.70.1 2 Clearly it doesn't work: when I disconnect the outside ethernet cable no workstation can connect to the Internet throught the outside2 network... What do I need more?

  Read the article

• sendmail error "Relaying denied. Proper authentication required. (state 14)."

  - by renevdkooi

  I am an absolute newB on sendmail, now I installed sendmail, configured it (as far as i know) added localhost-names, added access entries added virtuser entry, opened port 25 in iptables. Now when I connect from another location on the internet, and use telnet server.com 25 and use manual SMTP commands (HELO, MAIL From etc) the mail goes and arrives and gets put to the right user. but When I use another client and it's relayed by (for example google) I get this error back: Relaying denied. Proper authentication required. (state 14). What setting did I forget? Any config files I need to post so you can help me? I use CentOS 5.5 and the latest sendmail rpm

  Read the article

• TYPO3 unable to log in

  - by Agata

  Hi, My company prepared a new website based on typo3 (don't know the version but they started to prepare it in October 2011 so it's probably from that time. A couple of days ago I got my user name and password but I'm unable to log in (Itried withIE, Firefox and Chrome). Each time I try typo3 behaves like I'd be entering wrong user name orpassword (for sure I'm entering the right one, I also tried other user's data it ended up the same way). I use Windows 7 and Kaspersky Internet Security 9.0.0.736 - might their settings block typo3? I really don't know what to do and can't obtain help from the IT department (in head office in another country)... Thank you for any suggestions in advance.

  Read the article

• Cannot Access Server from External IP (Router)

  - by mindoftea

  We have an Ubuntu 10.04 LAMP server running on site (Apache is on port 80). It is running fine through the LAN, but I cannot access it using its external IP address through the Netopia 3000 Series modem by which it is connected to the internet. I have tried using what Netopia calls "Pinholes" (Port Forwarding) to make the server accessible, but a telnet to the external address just gives me "connect to address x.x.x.x: Operation timed out." I have also tried enabling "Services" and "IP Passthrough" on the router, but it gives the same result as above. How can I enable the server to be accessed through its external IP address? Because it connects fine locally, it would seem to be a problem with the Netopia router. Update: Booting the server in GUI mode instead of text mode solved the problem instantly. Any ideas why?

  Read the article

• Making HTML5 videos stored on AWS S3 **difficult** to download (because I cant make it impossible)

  - by Jimmery

  I am building a website that hosts video's stored on AWS's S3 service. The videos are played thru a HTML5 player we have built. Ive just been asked to make sure "nobody can steal our video's". Now I know that if you really don't want something stolen, don't put it up on the internet. However I just need to secure these videos as good as possible, the videos need to at the very least resist someone going thru the source code and trying to download them manually. One option available to me is to completely rebuild the video player in flash. This is not ideal, for several reasons, notably because I would also then have to build an App for mobile devices to be able to view this site. So I am looking for other options. I have heard about using a token to make the file available only during certain times. I have heard of using a separate file to serve the videos that sits between the HTML5 page and the video file. I am also having a look at IAM, the Secure AWS Access Control, in the hopes AWS can solve this problem for me. Can anyone here recommend any of these options? Or perhaps suggest other options available to me? Any help would be greatly appreciated.

  Read the article

• Release Notes for 3/8/2012

  Here are the notes for today’s release: Clarified the purpose of the fork name when creating a fork of a project. Added confirmation messages to deletion of system requirements when editing documentation. Deployed several bug fixes: Fixed an issue that was causing AppHarbor build notifications to fail. Thanks to claq2 for the bug report! Fixed several issues where extremely long titles or descriptions on items on the issues, discussions, profiles, and home pages would not wrap properly. Fixed a minor wrapping issue around the link to upload patches. Fixed an issue with viewing RSS feeds in Internet Explorer. Fixed an issue where replying to a discussion with a quote would push the content past the page margins. Have ideas on how to improve CodePlex? Visit our ideas page! Vote for your favorite ideas or submit a new one. Got Twitter? Follow us and keep apprised of the latest releases and service status at @codeplex.

  Read the article

• Setting nagios location in map

  - by Mech Software

  I have Nagios installed and I'm working on getting the network map correct. The problem I have is that "Nagios" appears to be in the "internet" when it should be located on the MechNAS server. What I want is Nagios Process to show up inside the local network. So it should show up at the same layer as MechNAS and development. Where exactly is that configured? I didnt see any place to set that up and it looks now like it's out there on it's own. Documentation and Googling didnt seem to turn up anything either.

  Read the article

• Allow access only to one website

  - by Alex

  Hey. I'd like to allow access on a computer connected directly to the internet to one website ONLY. The solution of IE's "Content advisor" or firefox's "FoxFilter" isn't good enough because it actually downloads the data and just don't display it. I want to block the traffic before the requests are sent. How is it possible? Thanks. Edit: OS is windows xp. The browser can be firefox, iexplorer, chrome... It doesn't matter. The computer is connected directly to the modem.

  Read the article

• Program for scanning, saving and restoring window position?

  - by hellbell.myopenid.com

  Is there some program for scanning, saving and restoring last window position? For example at this moment i have opened five window first is google chrome which is not opened at full screean but at half of display, second is notepad which is on right side, and third is cmd which is under notepad. So I want to use this combination of "layout" when primary using google chrome (surfing at internet), but if working primary at other program let's say word (writting text) i want to use other program and at different position (cause is effectivly). So the point is to easy switching from one "layout" to another. (Like in many program that support more modes, for example visual studio - debug layout, - coding layout, etc ...)

  Read the article

• How to recursively change folder permissions on WAMP server [closed]

  - by user1543227

  How do I change folder permissions recursively in Windows 7? Specifically, for my WAMP server, I want to change the permissions of my "www" folder so that its contents can be viewed over the Internet, and I want all of its subfolders to have the same permissions. Currently, for each folder, I'm getting the following message in my browser: "You don't have permission to access / on this server." I believe there's a simple command I could enter in a terminal for recursively changing folder permissions for global access; I just don't know what it is.

  Read the article

• Quit job for another but current employer doesn't want to lose me. Would it be a bad idea to stay?

  - by Confused

  So I've handed in my notice at my current job as I've been offered a job at another company. However, my current employer doesn't want to lose me and they want to know what I want to stay. I mostly enjoy working there so I'd be open to negiotiation. The new job was an unexpected opportunity that presented itself. Such things I'd be looking for are: Better computers for developers Opportunity to work from home occasionally Improved internet access (e.g. able to download software, no keyword blocking) Chance to work on other technologies than my primary (we do have projects on other technologies) Pay increase (though this isn't my primary motivation) I found out that some of these were already in progress when I handed in my notice :( Is it ever a good idea to remain at a company after you've resigned? What if they meet all my conditions and alter my contract accordingly? Will I burn my bridges at the new company (I've already told them I'd accept their offer)? Update: Thanks for the answers. Quite a mixed bag which was interesting. Anyway, just so you know, I've chosen to stay at my current company. So far, it definately feels like the right decision. Guess I won't know for a few months whether is was though.

  Read the article

• Port forwarding with router in bridged mode

  - by jipje44

  let say R1 and R2. R1 is in bridged mode and connected to R2. R2 is a dhcp server. To R2 is an internet camera connected. When i am on R2 and i do enter the ip of the camera then it will work without a problem. However i want to acces the camera from the outside. So in R2 i forwarded a port (done this one other networks without problems). However I can't connect from the outside. Can R1 blocking the port? I cant log in on R1 as long as it is in bridged mode.

  Read the article

• How do I set up a working GUEST USER account in Win XP Pro?

  - by user6501

  I have two user accounts within my WinXP Pro PC. One I'd like to erase. But I'd also like to setup a GUEST user account. I've already gotten 2-step instructions on how to get rid of the extraneous account: a) use an MS tool called delprof.msi b) manually delete the former users files in Documents & Settings. But I guess my original question was too complex -- kind of like a bill in Congress. So now I am just asking the final part of the question: How do I create a GUEST ACCOUNT -- then define what it will authorize/grant access to? i.e. internet browser(s), specific programs and files etc

  Read the article

• parallel vms in VMWare Server - how to configure network so they can ping each other?

  - by IronGoofy

  I'm using VMWare Server (currently on Version 1.0.7) and have two VMs that I would like to run at the same time. However, I'm having problems in setting them up so they can ping each other. I've configured them to use 'Bridged' networking. They both obtain an IP address from the DHCP server on my network, but after that they can't ping each other. It seems that only the first one has a functioning network connection (I can ping it from the host machine and Internet connection works), but the other one does not. If it helps, both VMs are running XP SP 3. Any ideas? Thanks!

  Read the article

• Is my site hacked, or does Google have problems? [duplicate]

  - by Bondye

  Possible Duplicate: Titles in Google results contain spammy prefixes I have a webshop online and I have some problems with redirecting from Google. Case 1 When I Google for my site at google.com in Iron SWR (safe Chrome version) and I click the first link I get the correct page. Case 2 When I Google for my site at google.nl in Iron SWR (safe Chrome version) and I click the first link Google will redirect me to a spam site. Case 3 When I Google for my site in Google Chrome and I click the first link Google will redirect me to a spam site. Case 4 When I Google for my site in FireFox and I click the first link Google will redirect me to a spam site. Case 5 When I Google for my site in Internet Explorer and I click the first link Google will redirect me a page that tells me the site is offline. HELP WHAT TO DO? I checked the .htaccess but this file is correct. I checked the index.php file but this one is also correct. What can I do? Hacked or does Google has trouble?

  Read the article

• Single PC Satellite Office Firewall

  - by Carl

  We are setting up a small, single PC office about 200 miles away. We plan on getting a cable internet connection but need some advice on a sufficient firewall. We would like to keep it under $100 if possible. 2 options we are considering are: Cisco RVS4000 (got some bad reviews) Linksys WRT120N (running DD-WRT) We need the ability for VPN but other than that we don't need anything special. We just want to keep that PC as safe as possible but easily maintainable because most work will be done remotely. What suggestions or solutions can you recommend for this application?

  Read the article

• Windows 2008 Server network issues

  - by Snowflow

  I have this one server that just doesn't want to be on the internet It's a new server, a twinblade, the other twin works, but not this one. It can connect fine to everythign else in the LAN, but cannot go out on the net It can be reached by ICMP requests over the net (the nagios server can probe it, but not ping it for instance), but not TCP Everything seems fine both in firewall and machine, i get no issues. Anyone care to help me out where i can start looking, i'm seriously confused. edit: it can ping gateway and through the sonicwall site to site VPN, it\s also able to resolve DNS. the only thing it can`t do is reach anything outside of LAN/VPN

  Read the article

• How to achieve in-folder discussions with IMAP (skip SMTP send, Thunderbird)?

  - by lkraav

  Does anyone know a good way to achieve replying to a message into the same IMAP folder without sending another duplicate copy over SMTP? This is to be achieved with a conventional GUI mail client, especially Thunderbird. Goal is to have an in-folder conversation. This is possible with shared IMAP folders, with per-user Seen indices, where subscribed recipients are guaranteed to see the new messages without them arriving from internet. Thunderbird is capable of storing a copy of a reply in the same folder as original message (Account Options), which is half way there. Just pressing Save sends the message into Drafts and that is probably an even bigger patch to try to put a "draft message" into the same folder as original. All options, client, server or logic-wise are an acceptable answer, including programming i.e. patching/creating add-on for Thunderbird.

  Read the article

• Can I use my old Sony Handycam TRV815 as a web cam?

  - by Optimal Solutions

  Has anyone ever used their old Sony Handycam (or maybe any older hand-held camcorder) as a web cam? As in streaming the live video from the cam to a web server (local or remote/Internet). My TRV815 has a pretty darn good picture quality for its time.. Via USB or Ethernet. It has S-Video but I think that is input. It has RCA out (white/red for audio and yellow for video) and I have used that to display to my TV. I have web cams already but was wondering if I could put this one to use also just for kicks..

  Read the article

• Wifi Signal Strengths

  - by Phorce

  I hope that I have asked this question in the right topic. Basically I use BT (In the U.K.) and I have problems with my router receiving a strong signal in certain rooms of the house, which, therefore makes the internet really slow in some cases it won't work at all. I have had experience working with Virgin Media (UK) before and just changed the channel number and this worked fine, but, do not know if I would receive the same outcome on BT. Could anyone suggest any other things that I could try alongside of the channel change in order to /hopefully/ get a stronger signal, without having to install Ethernet cable?

  Read the article

• Windows 7 doesn't recognize DVD drive

  - by adrianboimvaser

  I reinstalled Windows 7 (x64) because DVD drive stoped being recognized. At first it worked, I even got to burn a dvd. Some time later it misteriously dissapeared again. This question has been asked and answered many times on the Internet, but no proposed solution works for me. Please help! Any clues are gratefuly accepted! EDIT: I booted a live CD and succesfuly tried to burn a DVD. When I rebooted back to windows 7 the DVD drive was there. I burnt another DVD and it also works... I don't know how much it's gonna last... The drive is a TSSTcorp CDDVDW TS-L632H. FW Revision: HS02. It's parallel ATA.

  Read the article

• Release Notes for 5/31/2012

  Here are the notes for this week’s release: Pull Requests We’ve moved the pull request creation UI from a modal dialog to a full page to make room for more context on what you’re sending with your pull request. In this week’s changes, you’ll see the list of commits; look for diffs to appear in the coming weeks. Corrected several issues where the line that had comments associated was not being properly differentiated in the code snippet previews on pull request discussions. Corrected an issue where pull request line comments would not appear to be associated with the proper line of code. Fixed an issue where accepting pull requests was not working properly. Bug Fixes Fixed an issue where code snippets could not be inserted using Opera. Fixed an issue where Internet Explorer displayed an error message when browsing the site using https. Fixed an issue where the CAPTCHA was not displaying properly on the Contact User page. Fixed an issue where paging was not working properly in the “Recent Release in Followed Projects” sections for logged in users. Other Updated the activity stream to no longer auto-load new items when scrolling down. Added an explicit download link at the end of the download countdown in case certain browsers/scenarios don’t automatically start downloading. Have ideas on how to improve CodePlex? Visit our ideas page! Vote for your favorite ideas or submit a new one. Got Twitter? Follow us and keep apprised of the latest releases and service status at @codeplex.

  Read the article

• Windows/global setting to allow only SSL when on public Wifi?

  - by hungry

  Rather than going through each of my apps and modifying settings, or tweaking individual browser settings (I use three different browsers) or just being careful not to type non-SSL URLs into the web address bar, is there a solution at the Windows level that will prevent anything from connecting to the web from my laptop unless it's using SSL? I also have mini apps installed like Gmail checker, etc that connect to the web of their own volition using my usernames, passwords and such, so it goes beyond just web browsers. The reason I'm asking is I want to work securely on the general Internet when on public Wifi (e.g. coffee shops) without a lot of hassle or having to remember everything that needs to be locked down. When I'm back home I want to go back to full access mode using any kind of protocol on the web. If a website doesn't support SSL when I'm out in public then I just don't surf it - that's not a worry to me.

  Read the article

• Windows XP screen chopped off

  - by msindle

  One of the teachers at the school I support has a Dell Latitude E5500 and about 3/4 of the desktop shows just fine, but the right 1/4 shows whatever was on there last, like it's not refreshing (yes I tried refreshing the screen). For example if I open up Internet Explorer then minimize it the left 3/4 minimizes, but the right 1/4 stays pulled up. If I change the screen resolution to 800x600, it works perfectly fine. The sceen works together and has no problems. The only way I have found to get rid of this is to reload the laptop. How can I resolve this permanently?

  Read the article

< Previous Page | 728 729 730 731 732 733 734 735 736 737 738 739  | Next Page >