Search Results

Search found 5885 results on 236 pages for 'finally'.

Page 74/236 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• How to install nvidia drivers (GT 440 ) on Xubuntu 12.10 , screen res gone to 640x480 :(

  - by shaggyjack

  Hi all after days of endless googling I finally gave in and decided to try and directly ask for help. I have just installed Xubuntu and updated to 12.10 on a pretty old (12 years) machine, and I am now struggling to install the correct drivers for the nvidia 440 gt card.. I have managed to get "additional drivers" but the app does not show in the menu, I went through a few procedures which ended up in my screen going no higher than 640x480, and tried all the sudo apt-get variations with nvidia-current and current updates... I think I got the right version of the drivers ( 93.43.07 ) but they won't install from terminal as they say I am running an X server. So I learnt how to shut the graphic interface but then I try and install them from there but after I write the exact same command (sudo home/username/Downloads/NVIDIA-Linux-x86-96.43.07.pkg1.run ) nothing happens and the terminal says something like command not found. I am desperate for help if anybody could point me in the right direction that would be greatly appreciated. There are lots of similar topics on installing nvidia drivers but I seem to understand that current drivers are no good for my old GPU. So if anybody could show me how to install the right version that would be excellent. Thanks in advance! Jack

  Read the article

• Perfomance of 8 bit operations on 64 bit architechture

  - by wobbily_col

  I am usually a Python / Database programmer, and I am considering using C for a problem. I have a set of sequences, 8 characters long with 4 possible characters. My problem involves combining sets of these sequences and filtering which sets match a criteria. The combinations of 5 run into billions of rows and takes around an hour to run. So I can represent each sequence as 2 bytes. If I am working on a 64 bit architechture will I gain any advantage by keeping these data structures as 2 bytes when I generate the combinations, or will I be as well storing them as 8 bytes / double ? (64 bit = 8 x 8) If I am on a 64 bit architecture, all registers will be 64 bit, so in terms of operations that shouldn´t be any faster (please correct me if I am wrong). Will I gain anything from the smaller storage requirements - can I fit more combinations in memory, or will they all take up 64 bits anyway? And finally, am I likley to gain anything coding in C. I have a first version, which stores the sequence as a small int in a MySQL database. It then self joins the tabe to itself a number of times in order to generate all the possible combinations. The performance is acceptable, depending on how many combinations are generated. I assume the database must involve some overhead.

  Read the article

• C++ and system exceptions

  - by Abyx

  Why standard C++ doesn't respect system (foreign or hardware) exceptions? E.g. when null pointer dereference occurs, stack isn't unwound, destructors aren't called, and RAII doesn't work. The common advice is "to use system API". But on certain systems, specifically Win32, this doesn't work. To enable stack unwinding for this C++ code // class Foo; // void bar(const Foo&); bar(Foo(1, 2)); one should generate something like this C code Foo tempFoo; Foo_ctor(&tempFoo); __try { bar(&tempFoo); } __finally { Foo_dtor(&tempFoo); } Foo_dtor(&tempFoo); and it's impossible to implement this as C++ library. Upd: Standard doesn't forbid handling system exceptions. But it seems that popular compilers like g++ doesn't respect system exceptions on any platforms just because standard doesn't require this. The only thing that I want - is to use RAII to make code readable and program reliable. I don't want to put hand-crafted try\finally around every call to unknown code. For example in this reusable code, AbstractA::foo is such unknown code: void func(AbstractA* a, AbstractB* b) { TempFile file; a->foo(b, file); } Maybe one will pass to func such implementation of AbstractA, which every Friday will not check if b is NULL, so access violation will happen, application will terminate and temporary file will not be deleted. How many months uses will suffer because of this issue, until either author of func or author of AbstractA will do something with it? Related: Is `catch(...) { throw; }` a bad practice?

  Read the article

• Work experience before masters

  - by RJadhav

  I dont know if its the right place to ask such questions: I have a bachelors degree from an Indian university. I want to persue masters in one of the universities in usa, my profile is good enough to get me admitted to the school that I want to get into. I also have an offer letter from one of the top software companies in India (Infosys). I dont know which path to take, I know a masters degree will be of great help in future both in terms of money and career but I do not know whether I want to do it at this moment. I have signed up for both edx and coursera for some of the courses and I really liked learning them online. I am not sure if taking these courses can be a substitute for a masters degree. Also how will i be able to differentiate myself in the real world if I do not have a masters degree, since there are many in india who dont have it. And is it advisable for me to take some work experience say 1-2 years and then apply for a masters degree. Although universities do not explicitly mention work experience as a criteria, will any kind of work experience help me in deciding whether i want to do masters? finally I want to know what are the cons of not doing a masters.

  Read the article

• Oracle BPM overview and roadmap session on Monday, October 1st

  - by Manoj Das

  Bhagat Nainani and I, Manoj Das, will present a session on Oracle BPM overview and road map on Monday, October 1 2012, from 12:15-1:15 PM at Moscone South - 308. Since last OpenWorld, many good things have happened. Many customers have gone live with their BPM 11g deployments, some of whom were nominated for the Innovation Awards. From a product perspective, we delivered 11.1.1.6 and 11.1.1.7 is just around the corner. We will discuss some of the highlights related to both customer successes and product features. In particular, we will present some of the exciting new capabilities that we are introducing in 11.1.1.7 around business analyst driven model-to-execution, more comprehensive unified BPM suite, more flexible and manageable BPM. Another significant development is the release of Process Accelerators. We have not only released accelerators, we have ourselves deployed and are using them internally. We will talk about accelerators as well as our learnings. As the title suggests, we will also share some aspects of our roadmap - there are some very exciting things brewing that I can't wait to share with you on Monday. Hoping to see you on Monday. Again, the session is in Moscone South - 308 from 12:15-1:15. Looking forward to your tweets on the session - remember to use #oraclebpm and #oow. Finally, as always, feel free to ask Bhagat and me any questions you have, during the session as well as after the session.

  Read the article

• Gnome3 shell video corruption with ATI Radeon HD 4850 on 11.10 Oneiric

  - by AndyAtTheWebists

  I have a problem similar to what's been mentioned in a few other questions, namely: Ati incompatible with Gnome-shell? Gnome Shell Glitched Top Bar Ubuntu 11.10 I have read a number of other posts here and on other forums and have tried a bunch of different solutions. The Problem The problem manifests itself only in Gnome3. I have tried KDE, Unity and KFCE and all are fine. The graphics corruption is visible only on gnome panels (see images below). Everything works fine with the free ATI drivers, but they just lack power. The problem occurs with the proprietary ones from AMD/ATI. I have installed version 11.11 and 12.1 as per the instructions on wiki.cchtml.com/index.php/Ubuntu_Oneiric_Installation_Guide. I have the same exact problem in both cases. I have tried this on clean installs of Ubuntu 11.10 Oneiric Ocelot (x64 and x86) and on Linux Mint 12 (x64) with the same results. Also, it looks like after some time of not using it, the PC just freezes. Maybe an overheat? Will look into it. Things I've Tried I have tried the following fixes: Different versions of drivers from ATI including the latest - this worked for some, not for me. Installing Oneiric specific package generated from driver, as well as the default install Removed the Unity Global menu Disabled file manager handling desktop Disabled Compiz "detect refresh rate" Sync to VBlank in Compiz on and off Please help! This is the first time in 10 years that I've finally had the chance to switch my primary desktop to Linux (stopped doing .NET dev work), and this is really getting me down. This is what the problem looks like: And:

  Read the article

• Eclipse Java Code Formatter in NetBeans Plugin Manager

  - by Geertjan

  Great news for Eclipse refugees everywhere. Benno Markiewicz forked the Eclipse formatter plugin that I blogged about sometime ago (here and here)... and he fixed many bugs, while also adding new features. It's a handy plugin when you're (a) switching from Eclipse to NetBeans and want to continue using your old formatting rules and (b) working in a polyglot IDE team, i.e., now the formatting rules defined in Eclipse can be imported into NetBeans IDE and everyone will happily be able to conform to the same set of formatting standards. And now you can get it directly from Tools | Plugins in NetBeans IDE 7.4: News from Benno on the plugin, received from him today: The plugin is verified by the NetBeans community and available in the Plugin Manager in NetBeans IDE 7.4 (as shown above) and also at the NetBeans Plugin Portal here, where you can also read quite some info about the plugin:  http://plugins.netbeans.org/plugin/50877/eclipse-code-formatter-for-java The issue with empty undo buffer was solved with the help of junichi11: https://github.com/markiewb/eclipsecodeformatter_for_netbeans/issues/18 The issue with the lost breakpoints remains unsolved and there was no further feedback. That is the main reason why the save action isn't activated by default. See also the open known issues at https://github.com/markiewb/eclipsecodeformatter_for_netbeans/issues?state=open Features are as follows:  Global configuration and project specific configuration.  On save action, which is disabled by default. Show the used formatter as a notification, which is enabled by default.  Finally, Benno testifies to the usefulness, stability, and reliability of the plugin: I use the Eclipse formatter provided by this plugin every day at work. Before I commit, I format the sources. It works and that's it. I am pleased with it. Here's where the Eclipse formatter is defined globally in Tools | Options: And here is per-project configuration, i.e., use the Project Properties dialog of any project to override the global settings:  Interested to hear from anyone who tries the plugin and has any feedback of any kind! 

  Read the article

• The overlooked OUTPUT clause

  - by steveh99999

  I often find myself applying ad-hoc data updates to production systems – usually running scripts written by other people. One of my favourite features of SQL syntax is the OUTPUT clause – I find this is rarely used, and I often wonder if this is due to a lack of awareness of this feature.. The OUTPUT clause was added to SQL Server in the SQL 2005 release – so has been around for quite a while now, yet I often see scripts like this… SELECT somevalue FROM sometable WHERE keyval = XXX UPDATE sometable SET somevalue = newvalue WHERE keyval = XXX -- now check the update has worked… SELECT somevalue FROM sometable WHERE keyval = XXX This can be rewritten to achieve the same end-result using the OUTPUT clause. UPDATE sometable SET somevalue = newvalue OUTPUT deleted.somevalue AS ‘old value’,              inserted.somevalue AS ‘new value’ WHERE keyval = XXX The Update statement with output clause also requires less IO - ie I've replaced three SQL Statements with one, using only a third of the IO.  If you are not aware of the power of the output clause – I recommend you look at the output clause in books online And finally here’s an example of the output produced using the Northwind database…  

  Read the article

• Terminal closing itself after 14.04 upgrade

  - by David

  All was fine in 12.04, in this case I'm using virtualbox in Windows. Last days the warning message about my Ubuntu version no longer being supported was coming up pretty often, so, yesterday I finally decided to upgrade. The upgrading process ran ok, no errors, no warnings. After rebooting the errors started to happen. Just after booting up there were some errors about video, gnome, and video textures (sorry I didn't care in that moment so I don't remember well). Luckly that went away after installing VirtualBox additions. But the big problem here is that I can't use the terminal. It opens Ok when pressing control+alt+t, but most of the commands cause instant closing. For example, df, ls, mv, cd... usually work, although it has closed few times. But 'find' causes instant close. 'apt-get' update kills it too, just after it gets the package list from the sources, when it starts processing them. I've tried xterm, everything works and I have none of that problems. I have tried reinstalling konsole, bash-static, bash-completion, but nothing worked. I have no idea what to do as there is no error message to search for the cause. It seems something related to bash, but that's all I know.

  Read the article

• Ubuntu 12.04 Faster boot, Hibernate & other questions

  - by Samarth Shukla

  I've recently started exploring Ubuntu (my 1st distro). I fresh installed precise without a swap (4GB ram). The only issues are, slow boot (regardless of the swap) and instability after a few days of installation. The runtime performance is immaculate otherwise. Even though not needed, I still set swappiness = 10. I've tried the quiet splash profile to GRUB; already have preload installed. But it still is pretty slow. I am not too confident on recompiling the kernel yet. But you could please advice me on that too. I've also added the following to fstab: #Move /tmp to RAM: tmpfs /tmp tmpfs defaults,noexec,nosuid 0 0 (Also if you could please tell me the exact implication/scope of this tweak on physical ram & the swap.) But nothing has happened really. So what alternatives are there to make it boot faster? Also, right after fresh install, though no swap partition, the system still showed /dev/zram0 of arond 2GB which was never used (probably because of the above fstab edit). Finally, I experimented with Hibernate a little, but many claim that it doesn't work on 12.04. (Not to mention, I made a swap file of 4GB for it). What I did was: sudo gedit /var/lib/polkit-1/localauthority/50-local.d/hibernate.pkla Then I added the following lines, saved the file, and closed the text editor: [Re-enable Hibernate] Identity=unix-user:* Action=org.freedesktop.upower.hibernate ResultActive=yes I also edited the upower policy for hibernate: gksudo gedit /usr/share/polkit-1/actions/org.freedesktop.upower.policy I added these lines: < allow_inactive >no< /allow_inactive > < allow_active >yes< /allow_active > But it did not work. So is there an alternate method perhaps that can make it work on 12.04?

  Read the article

• Office arangement - comfort vs. teamwork?

  - by finrod

  Our team works in an open-space office. Luckily the cubicles are quite big (L shaped tables for everyone!), there is quite a lot of space so we are not sandwiched. Without going into further detail, there are comfortable spots (window), normal spots and stupid spots (near the corridor). Until recently, the development team of twelve engineers was seated so that all types of spots were occupied and we were all close together. In the old arrangement, verbal communication was very easy - half of the team was withing talking distance. The other half was like ten steps away. Often times I could ask, discuss, solve problems without leaving the cube. Most of the communication is work related, no bullshit or mental masturbation that would unnecessarily distract others. Now we have moved to another part of the building and have larger space to occupy. At this point, everyone could pick their spot. Naturally all stupid spots are left empty (for the poor newcomers to occupy bwehaha). In the new arrangement, the development team is stretched across the floor and some of the key engineers are seated 'far' from each other - definitely not within talking distance. I have yet to experience how this works out but am getting concerned that team work and communication may have been traded for personal comfort. Finally the questions... What do you think is better office arrangement? Such that allows for free verbal communication but trading for some developer's comfort, or such that potentially hinders verbal communication but makes developer's more comfortable in their spot? Or maybe it does not matter at all and we will evolve to be efficient in any arrangement? What is your personal experience? Note - yes I read books and posts how workplace is important in our job. However in this case - we are all still in open space and the difference between the different spots are not really groundbreaking. So I'm thinking the little comfort that few developers gain is not worth the loss of easy communication.

  Read the article

• Discovering Your Project

  - by Tim Murphy

  The discovery phase of any project is both exciting and critical to the project’s success.  There are several key points that you need to keep in mind as you navigate this process. The first thing you need to understand is who the players in the project are and what their motivations are for the project.  Leaving out a key stakeholder in the resulting product is one of the easiest ways to doom your project to fail.  The better the quality of the input you have at this early phase the better chance you will have of creating a well accepted deliverable. The next task you should tackle is to gather the goals for the project.  Specifically, what does the company expect to get for the money they are about to layout.  This seems like a common sense task, but you would be surprised how many teams to straight to building the system.  Even if you are following an agile methodology I believe that this is critical. Inventorying the resources that already exists gives you an idea what you are going to have to build and what you can leverage at lower risk.  This list should include documentation, servers, code repositories, databases, languages, security systems and supporting teams.  All of these are “resources” that can effect the cost and delivery schedule of your project. Finally, you need to verify what you have found and documented with the stakeholders and subject matter experts.  Documentation that has not been reviewed is actually a list of assumptions and we all know that assumptions are the mother of all screw ups. If you give the discovery phase of your project the attention that it deserves your project has a much better chance of success. I would love to hear what other people find important for this phase.  Please leave comments on this post so we can share the knowledge. del.icio.us Tags: Project discovery,documentation,business analysis,architecture

  Read the article

• What is an Enterprise Resource Planning (ERP) System?

  In order to understand what an Enterprise Resource Planning System is let us look at a classic American kids snack, the Rice Krispy Treat if we conceptually view the treat as a company’s internal applications as a whole.  Furthermore we can view a company’s departmentalized software applications as the theoretical Rice Krispies in the treat. In addition, the Rice Krispies consist of a combination of ingredients that be broken down into data, user interfaces and business logic. Next, we have the margarine or butter that is used to help the marshmallows bind with the Rice Krispies; this role in our conceptual view is taken by a data source typically as a relational database management system. Finally we have the melted marshmallows which act as the ERP software that connects all of the individual departmental software applications in to one unified system that allows all user one unified system to interact with all of the individual dispersed systems. An example of this would be if a customer places an order with a telephone operator and once the orders is processed an employee in the shipping department can see the order ready for fulfillment on his order screen. The ERP acts a go between for various independent departmental systems so that they can integrate with one another.

  Read the article

• EclipseLink does multitenancy. Today.

  - by alexismp

  So you heard Java EE 7 will be about the cloud, but that didn't mean a whole lot to you. Then it was characterized as PaaS, something in between IaaS and SaaS. And finally it all became clear when referenced as support for multitenancy. Or did it? When it comes to JPA and persistence is general, multitenancy is defined as the ability to share a database schema among various groups of users (i.e. tenants). This means that there is no database setup or reconfiguration required as the data is co-located in the same database. EclipseLink 2.3 (the Indigo train release) let's you do just that by supporting tenant discriminator column(s) via annotations or XML with applications providing values for these discriminators via an API or PU configuration. Check out details here. EclipseLink 2.3 is scheduled to be the default and supported JPA provider for GlassFish 3.1.1. Another nice feature of this release is the ability to extend persistence units on the fly. The GlassFish Podcast has an interview up with EclipseLink's Doug Clarke. Expect more on multitenancy across the Java EE spectrum as the specification work progressed.

  Read the article

• How to capture a Header or Trailer Count Value in a Flat File and Assign to a Variable

  - by Compudicted

  Recently I had several questions concerning how to process files that carry a header and trailer in them. Typically those files are a product of data extract from non Microsoft products e.g. Oracle database encompassing various tables data where every row starts with an identifier. For example such a file data record could look like: HDR,INTF_01,OUT,TEST,3/9/2011 11:23 B1,121156789,DATA TEST DATA,2011-03-09 10:00:00,Y,TEST 18 10:00:44,2011-07-18 10:00:44,Y B2,TEST DATA,2011-03-18 10:00:44,Y B3,LEG 1 TEST DATA,TRAN TEST,N B4,LEG 2 TEST DATA,TRAN TEST,Y FTR,4,TEST END,3/9/2011 11:27 A developer is normally able to break the records using a Conditional Split Transformation component by employing an expression similar to Output1 -- SUBSTRING(Output1,1,2) == "B1" and so on, but often a verification is required after this step to check if the number of data records read corresponds to the number specified in the trailer record of the file. This portion sometimes stumbles some people so I decided to share what I came up with. As an aside, I want to mention that the approach I use is slightly more portable than some others I saw because I use a separate DFT that can be copied and pasted into a new SSIS package designer surface or re-used within the same package again and it can survive several trailer/footer records (!). See how a ready DFT can look: The first step is to create a Flat File Connection Manager and make sure you get the row split into columns like this: After you are done with the Flat File connection, move onto adding an aggregate which is in use to simply assign a value to a variable (here the aggregate is used to handle the possibility of multiple footers/headers): The next step is adding a Script Transformation as destination that requires very little coding. First, some variable setup: and finally the code: As you can see it is important to place your code into the appropriate routine in the script, otherwise the end result may not be as expected. As the last step you would use the regular Script Component to compare the variable value obtained from the DFT above to a package variable value obtained say via a Row Count component to determine if the file being processed has the right number of rows.

  Read the article

• How do I finish installing Sun JDK after cancelling out of the legal term screen?

  - by Ravi

  I am a newcomer to linux and have had lots of problems in installing java on my newly installed Ubuntu 11.10. I use a statistical programming environment called R and many of the packages there require java (the sun variety, I am told). I tried the following : sudo add-apt-repository ppa:ferramroberto/java sudo apt-get update sudo apt-get install sun-java6-jre sun-java6-plugin sun-java6-fonts (after this, I wanted to continue with (but never got that far) : sudo apt-get install sun-java6-jdk After this, a window appeared with the heading, "Configuring jre", or something like that. Below was a long list of legal text about accepting Sun's terms. I did not know how to close this window (no obvious option like pressing return worked). After a long time, when nothing seemed to happen, I finally closed the window. After that, I could not open synaptic. I got the error message : dpkg was interrupted. You must manually run 'sudo dpkg --configure -a' I did this. But it does not help. I have java as a "broken" program. When I try to remove the program from synaptic, I get a message that I must reinstall it again.I do not know what I should do. I want to install jdk6. And also remove the open jdk which is still persistently present in my system. I tried the clean and purge command shown below. Next, I tried to remove the sun-java6-jre from synaptic. I get the following message :E: sun-java6-jre: Package is in a very bad inconsistent state - you should reinstall it before attempting a removal. When I tried to follow the procedure suggested in the related question (from the link suggested below), I get the following message on trying to install again :Could not mark all packages for installation or upgrade.The following packages have unresolvable dependancies. Make sure that all required repositories are added and enabled in the preferences. sun-java6-bin : Depends: sun-java6-jre but it is not going to be installed

  Read the article

• File doesn't exist when trying to change permissions following the avasys image scan manual

  - by Howard Graham

  I was finally able to connect to avasys.jp and downloaded and installed iscan_2.28.1-3.ltdl7_amd64.deb iscan-data_1.13.0-1_all.deb. The programs appeared to install correctly. I then ran sane-find-scanner and got back: found USB scanner (vendor=0x04b8, product=0x012d) at libusb:001:003 I then ran lsusb and got back: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 04b8:012d Seiko Epson Corp. Perfection V10/V100 (GT-S600/F650) Bus 001 Device 004: ID 03f0:4817 Hewlett-Packard Bus 002 Device 002: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse the avasys image scan manual instructed me to run chmod 0666 /proc/bus/usb/001/003 which returned chmod: cannot access `/proc/bus/usb/001/003': No such file or directory In 12.04, no such directory exists. 12.04 appears to deal with USB in another way. What must I do to get the usb port 001/003 recognized by xsane and sane as the port where the scanner can be located? What must I do to continue installing the scanner?

  Read the article

• USB device not accepting address

  - by Mike Williamson

  I have a series of machines that I am building for work that have usb card readers. When I boot them I get a long series of messages: ... [ 2347.768419] hub 1-6:1.0: unable to enumerate USB device on port 6 [ 2347.968178] usb 1-6.6: new full-speed USB device number 10 using ehci_hcd [ 2352.552020] usb 1-6.6: device not accepting address 10, error -32 [ 2352.568421] hub 1-6:1.0: unable to enumerate USB device on port 6 [ 2352.768179] usb 1-6.6: new full-speed USB device number 12 using ehci_hcd [ 2357.352033] usb 1-6.6: device not accepting address 12, error -32 ... On some older machines this only takes a few attempts before the card reader finally accepts an address, while on newer machines it can take many minutes. Changing hardware is not an option and plugging the usb card reader into a different port is only an option for the older manchines. This was a problem under 11.04 and I am now running the 12.04 beta and its still happening. Is there something I can do in the software (a udev rule perhaps?) that would fix this? Any advice appreciated. I'm happy to provide more details if you need them.

  Read the article

• Tell Us Once&ndash;Final Phase goes live

  - by BizTalk Visionary

  Yesterday the final phase of ‘Tell Us Once’ went live. This completes the 4 1/2 year journey Solidsoft started on this cross government project with the addition of full electronic distribution of data and the most import piece – access for the citizen to use the service on-line. Tell Us Once (TUO) is the award-winning, cross-government programme that lets people inform central government and local authorities just once of a birth or death. In service in over 95% of councils in England, Scotland and Wales, it provides a permanent solution to the long-standing and frustrating issue of people having to notify the government multiple times. Several years ago, research showed that people had to make up to 44 contacts when reporting a death to government bodies and their local authority. The TUO service is offered as a face-to-face interview by the local authority or by telephone to a dedicated telephony service run by the Department for Work and Pensions (DWP). and a  now a TUO online service for death. From the bereavement section of the  Direct Gov web site the citizen is able to ‘enrich’ the standard death registration data to allow the ‘Tell Us Once’ system inform the various government departments about the death. These include the local council, DVLA, DWP, Passport service and HMRC. For the record this is an excellent example of how an SME working with a large SI partner can deliver success for government in a responsive and agile manner. For me personally it is a proud moment in which a vision I started with a very small team was followed through, extended and finally delivered by an excellent team at Solidsoft.

  Read the article

• Defining a function that is both a generator and recursive [on hold]

  - by user96454

  I am new to python, so this code might not necessarily be clean, it's just for learning purposes. I had the idea of writing this function that would display the tree down the specified path. Then, i added the global variable number_of_py to count how many python files were in that tree. That worked as well. Finally, i decided to turn the whole thing into a generator, but the recursion breaks. My understanding of generators is that once next() is called python just executes the body of the function and "yields" a value until we hit the end of the body. Can someone explain why this doesn't work? Thanks. import os from sys import argv script, path = argv number_of_py = 0 lines_of_code = 0 def list_files(directory, key=''): global number_of_py files = os.listdir(directory) for f in files: real_path = os.path.join(directory, f) if os.path.isdir(real_path): list_files(real_path, key=key+' ') else: if real_path.split('.')[-1] == 'py': number_of_py += 1 with open(real_path) as g: yield len(g.read()) print key+real_path for i in list_files(argv[1]): lines_of_code += i print 'total number of lines of code: %d' % lines_of_code print 'total number of py files: %d' % number_of_py

  Read the article

• How to remove a box2d body when collision happens?

  - by Ayham

  I’m still new to java and android programming and I am having so much trouble Removing an object when collision happens. I looked around the web and found that I should never handle removing BOX2D bodies during collision detection (a contact listener) and I should add my objects to an arraylist and set a variable in the User Data section of the body to delete or not and handle the removing action in an update handler. So I did this: First I define two ArrayLists one for the faces and one for the bodies: ArrayList<Sprite> myFaces = new ArrayList<Sprite>(); ArrayList<Body> myBodies = new ArrayList<Body>(); Then when I create a face and connect that face to its body I add them to their ArrayLists like this: face = new AnimatedSprite(pX, pY, pWidth, pHeight, this.mBoxFaceTextureRegion); Body BoxBody = PhysicsFactory.createBoxBody(mPhysicsWorld, face, BodyType.DynamicBody, objectFixtureDef); mPhysicsWorld.registerPhysicsConnector(new PhysicsConnector(face, BoxBody, true, true)); myFaces.add(face); myBodies.add(BoxBody); now I add a contact listener and an update handler in the onloadscene like this: this.mPhysicsWorld.setContactListener(new ContactListener() { private AnimatedSprite face2; @Override public void beginContact(final Contact pContact) { } @Override public void endContact(final Contact pContact) { } @Override public void preSolve(Contact contact,Manifold oldManifold) { } @Override public void postSolve(Contact contact,ContactImpulse impulse) { } }); scene.registerUpdateHandler(new IUpdateHandler() { @Override public void reset() { } @Override public void onUpdate(final float pSecondsElapsed) { } }); My plan is to detect which two bodies collided in the contact listener by checking a variable from the user data section of the body, get their numbers in the array list and finally use the update handler to remove these bodies. The questions are: Am I using the arraylist correctly? How to add a variable to the User Data (the code please). I tried removing a body in this update handler but it still throws me NullPointerException , so what is the right way to add an update handler and where should I add it. Any other advices to do this would be great. Thanks in advance.

  Read the article

• Which programming language should i choose? (much more info inside) [closed]

  - by Andreas

  I am not completely sure if this is the right place to put this question, but since it's the programming thread I guessed that there's many experienced programmers here. :) Ok, hello! My name is Andreas and I am a 16 years old guy from Norway. For some time now I've wanted to learn a programming language. Six months ago I started learning C++, but quit withing a week due to lack of motivation. The same thing happend only 2 months ago when I tried to learn Lua. I wanted to program mods to the game Garry's mod, and was really motivated. Then I stopped playing the game, and the programming stopped with it. Today though I am ready again. The only difference is that I am not completely sure what I want to do with the language. I only want to create something, and I miss the progress of failing and enduring hard work until I finally solve the problem I've worked on for hours. What I am trying to say is; Is there any program out there that allows me, a complete noob (I didn't learn that much in a week, so I like to call myself a beginner), to create apps, mods or something similar but at the same time being qualified as a first time language? I was thinking of Java, because Android, Minecraft and many other applications and games use it. But I've heard that it is going to be replaced by a program called HTML 5 (whatever that is), is this true? I certainly don't want to spend many hours of my life on something that is useless in a year or two. Hopefully I didn't make this too complicated. I know that it is hard to recommend something when I don't have a goal, but I really don't know what to say. Have a good day kind folks! - Andreas EDIT:* I did not know that this was an off topic question, really sorry!

  Read the article

• Distributed Rendering in the UDK and Unity

  - by N0xus

  At the moment I'm looking at getting a game engine to run in a CAVE environment. So far, during my research I've seen a lot of people being able to get both Unity and the Unreal engine up and running in a CAVE (someone did get CryEngine to work in one, but there is little research data about it). As of yet, I have not cemented my final choice of engine for use in the next stage of my project. I've experience in both, so the learning curve will be gentle on both. And both of the engines offer stereoscopic rendering, either already inbuilt with ReadD (Unreal) or by doing it yourself (Unity). Both can also make use of other input devices as well, such as the kinect or other devices. So again, both engines are still on the table. For the last bit of my preliminary research, I was advised to see if either, or both engines could do distributed rendering. I was advised this, as the final game we make could go into a variety of differently sized CAVEs. The one I have access to is roughly 2.4m x 3m cubed, and have been duly informed that this one is a "baby" compared to others. So, finally onto my question: Can either the Unreal Engine, or Unity Engine make it possible for developers to allow distributed rendering? Either through in built devices, or by creating my own plugin / script?

  Read the article

• Help with the RT3290 Wireless adapter

  - by Potek

  I know there is a lot of questions about RT3290 wireless adapter, but I read many many of them and noone helped me with my problem. So, I have the HP Pavilion dm1 laptop and I installed Xubuntu 13.10 on it. During the instalation it poped up that I'm able to connect to the internet via network adapter. I did it obviously, but it worked for like 5 seconds, then it said that network connection is down and I couldn't connect to my router, even if i could actually see network connections avaible. Then (when installation ended) I rebooted my computer. My network was avaible! I could connect and browse the internet smoothly. Next day I turned on my laptop and I saw my wireless connection is no longer avaible, so I plugged laptop to the internet via Ethernet cable and started to explore internet searching solution for my problem. I did this: How do I get a Ralink RT3290 wireless card working? And I was able to connect BUT my kernel started to panic every time I started Mozilla or any program that is connecting to the internet. Every tip i searched was almost the same as the link above. I tried to do this many ways. I even Reinstalled Xubuntu to do everything with clear system but the same thing happened. THEN I installed Linux Mint to check whether it is a major or just Xubuntu problem. Linux Mint responded even worse, because I wasn't even able to use terminal (I clearly messed something up). I would really, really appreciate every help, because I do want to solve this problem and finally be able to use Xubuntu/Ubuntu. I'm waiting for advice from anyone patiently. If anyone wants some details, just tell me which ones.

  Read the article

• Shutdown issue on persistent LiveUSB

  - by John K

  A) Downloaded Ubuntu to a Windows 7 temp directory from: http://www.ubuntu.com/download/ubuntu/download (Ubuntu 11.10 - Latest version / 32-bit). The output was a .iso file. B) Created a bootable USB stick using Universal USB Installer: http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/. Did not select "Persistent file". Result: Tried it in a Dell Latitude D630 Dell laptop: works every time, many startups and shutdowns. C) Repeated B) but with "Persistent file" set. Works once or twice, but then, just locks on the Ubuntu splash screen. E) Downloaded LiveUSB Install from http://live.learnfree.eu/download, which created a file on Windows 7 called live-usb-install-2.3.2.exe. F) Ran the above installer with "Persistent file" to a 4GB ScanDisk (formatted) thumb drive. Result: Worked pretty good for a while. Shutdown and rebooted several times. Changed items like creating a new directories - all worked. Then: Setup an Admin account with a password and no auto login. On next reboot, it required the password and logged in correctly. Tried to shutdown via the top left icon - Shutdown menu option. Key issue: Would not shutdown, but would always go back to the login prompt. Could successfully login. Finally, shutdown (which just put me back to the login window), and hard shutdown with the power switch. Result: On reboot, just locks on the Ubuntu splash screen. Questions (note, very new to Linux): Did I shutdown wrong (I mean prior to the hard power off)? Is the persistence option very unstable, or am I doing something else completely wrong?

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >