Search Results

Search found 2753 results on 111 pages for 'patch recommendation'.

Page 75/111 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• LAMP server VM issues

  - by nullArray

  After getting a recommendation to salvage a wiki by installing a LAMP server, I went on the prowl for a good virtualized one. I used the VMware Player version. Since the windows box has Bonjour, I can, for example, go to http://lamp.local. and it works see the web client. The problem is, I can't ssh to a directory to scp the files I need, mount a usb thumbdrive (usbfs is unsupported) nor get samba working. I can't even update the ubuntu installation, it fails. I've tried bridged, nat and host-only networking settings in VMware Player. Bridged gives me an undefined IP, while the other two each have different IPs. All three settings allow me to access the web config, but none of them give me samba access. Windows usually freezes, then reports that it cannot connect. I'd rather not wipe a box to do a dedicated install, is there I way I can get this VM working, or are there better LAMP VMs out there? This one came already working and set up with VMware Player, so I thought it would be perfect... Thanks,

  Read the article

• Trying to setup catchall mail forwarding on my rackspace's cloudspace server

  - by bob_cobb

  I'm running Ubuntu 12 Precise Pangolin and am trying to configure my server to catchall mail sent to it and forward it to my gmail address. I've been trying lots of examples online like editing my main.cf file which looks like this: smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = destiny alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = destiny, localhost.localdomain, localhost relayhost = smtp.sendgrid.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 51200000 recipient_delimiter = + inet_interfaces = all inet_protocols = all In my /etc/postfix/virtual I have: @mydomain.com [email protected] @myotherdomain.com [email protected] Which isn't working when I email [email protected] or [email protected]. So I got the recommendation to add the following to my /etc/alias: postmaster:root root:[email protected] restarted postfix, and tried emailing [email protected] or [email protected] but it still won't send. Does anyone have any idea what I'm doing wrong here? I'd appreciate any help.

  Read the article

• Bash preexecute

  - by Alex_Bender

  I'm trying to write bash command wrapper, which will be patch bash current command on the fly. But i'm faced with the problem. As i'm not a good Shell user, i can't write right expression of variable assignment in string. See bellow: I'm set trap to preexecute, through this: alex@bender:~$ trap "caller >/dev/null || xxx \"\${BASH_COMMAND}"\" DEBUG; I want change variable BASH_COMMAND, do something like BASH_COMMAND=xxx ${BASH_COMMAND} but i don't know, how i need escaping variables in this string NOTE: xxx -- my custom function, which must return some value, if in end of command situated word teststr function xxx(){ # find by grep, if teststr in the end `echo "$1" | grep "teststr$" >/dev/null`; # if true ==> do if [ "$?" == "0" ]; then # cut last 6 chars (len('teststr')==6) var=`echo "$1" | sed 's/......$//'`; echo "$var"; fi } How can i do this stuff?: alex@bender:~$ trap "caller >/dev/null || ${BASH_COMMAND}=`xxx $BASH_COMMAND`" DEBUG;

  Read the article

• Android Jelly Bean: fix search button [migrated]

  - by Jon Rodriguez

  I just upgraded my Nexus S from Android 4.0.something (I forget the subversion) to Android 4.1.1. The magnifying glass button used to be really useful -- it would trigger a search function within whatever app I was using. For example pressing it within the Maps app would search for a place, or pressing it within the Facebook app would search for a friend. But now, the magnifying glass button launches a google search no matter what the context is! This is extremely annoying and makes a lot of apps harder to use, especially Maps. How can I use a setting or a patch to revert the magnifying glass button to its old behavior?

  Read the article

• Is there a way to determine which service (in svchost.exe) does an outgoing connection?

  - by fluxtendu

  I'm redoing my firewall configuration with more restrictive policies and I would like to determine the provenance (and/or destination) of some outgoing connections. I have an issue because they come from svchost.exe and go to web content/application delivery providers - or similar: 5 IP in range: 82.96.58.0 - 82.96.58.255 --> Akamai Technologies akamaitechnologies.com 3 IP in range: 93.150.110.0 - 93.158.111.255 --> Akamai Technologies akamaitechnologies.com 2 IP in range: 87.248.194.0 - 87.248.223.255 --> LLNW Europe 2 llnw.net 205.234.175.175 --> CacheNetworks, Inc. cachefly.net 188.121.36.239 --> Go Daddy Netherlands B.V. secureserver.net So is it possible to know which service does a particular connection? Or what's your recommendation about the rules applied to these ones? (Comodo Firewall & Windows 7) Update: netstat -ano & tasklist /svc help me a little but they are many services in one svchost.exe so it's still an issue. moreover the service names returned by "tasklist /svc" are not easy readable. (All the connections are HTTP (port 80) but I don't think it's relevant)

  Read the article

• Overlapping appointments in Outlook 2003

  - by iansinke

  I'm using Microsoft Outlook 2003 (Home and Student, if that makes any difference, which I doubt) as my calendar, and I have one minor gripe: it can't really handle appointments that don't begin and end right on the half-hour mark. For instance, if I have a class that ends at 9:22 AM and another class that begins at 9:27 AM, they will appear to overlap in the day view. Not a big deal, but it bugs me nonetheless. Anybody know of a hack or patch that will fix this issue? I've searched the Outlook documentation as well as Google to no avail.

  Read the article

• How to stop Windows 7 from applying patches on shutdown

  - by Stabledog

  I have my Windows 7 Pro set up to "download patches, but let me choose when to install them". However, on several occasions, when I have shut down the O/S, Windows Update has proceeded with a lengthy patch application even though I issued no permission to do so. This is a bit scary to me... in particular, it seems I cannot trust the Windows Update settings. Is this official policy somewhere at Microsoft, or am I witnessing a bug? What can be done about it?

  Read the article

• Our Server Rooted but exploit doesnt work?

  - by Salina Odelva

  Hi everyone. My friend's hosting server got rooted and we have traced some of attacker's commands.. We've found some exploits under /tmp/.idc directory.. We've disconnected the server and are now testing some local kernel exploits that the attacker tried on our server. Here is our kernel version: 2.4.21-4.ELsmp #1 SMP We think that he got root access by the modified uselib() local root exploit but the exploit doesn't work! loki@danaria {/tmp}# ./mail -l ./lib [+] SLAB cleanup child 1 VMAs 32768 The exploit hangs like this.. I've waited over 5 minutes but nothing has happened. I've also tried other exploits but they didn't work.. Any ideas? or experimentations with this exploit? Because we need to find the issue and patch our kernel but we can't understand how he used this exploit to get root... Thanks

  Read the article

• How to allow program updates without prompting UAC?

  - by Ryan Mortier

  We have about 15-20 users who have this software installed. We have UAC enabled through GPO as you should, which means the software prompts for admin approval if a standard user trys to install it. Thats fine, they can call the help desk to have the software installed. My problem is, our help desk is being bombarded every day because users can't update the software and there are updates almost every day which is prompting UAC. Using procmon.exe to find out where it was trying to write to, I then created a GPO to allow file permission access to the program files folder for this particular software, including the program data folder, but it still prompts for admin approval. It seems as though that the software is using msiexec.exe to run a .msp patch file. The only "ACCESS DENIED"s I can still see in procmon is things like this: What can I possibly do to stop this software from prompting UAC with admin password credentials aside from disabling UAC?

  Read the article

• ESXi 5.1 on Poweredge 510 freezes after base-esx update

  - by goober

  Background / Problem Just experienced an issue where an ESXi host was upgraded from 5.0 -- 5.1 perfectly fine. Then, I did a scan and remediated a patch (ESXi510-201210401-BG) Looking into the host on via the kvm switch, this appears to complete successfully. However, on reboot, the server hangs at the "Initializing Power Management" phase. I've read from various spots around the internet that this usually clears itself up again upon a cold boot, but given that our servers are in a different building with different access rules, the less I have to physically go there, the better. :) Question Is there anything I can do to avoid an ESXi host hanging at the "initialize power management" phase of boot after remediating the host to apply patches?

  Read the article

• I've inherited a rat's nest of cabling. What now?

  - by hydroparadise

  You know, you see pictures like below and sort of chuckle until you actually have to deal with it. I have just inherited something that looks like the picture below. The culture of the organization does not tolerate down time very well, yet I have been tasked to 'clean it up'. The network functions as it is, and there doesn't seem to be rush to get it done, but I will have to tackle the bear at some point. I get the ugly eye when I mention anything about weekends. So my question goes, is there sort of a structured approach to this problem? My Ideas thus far: Label, Label, Label Make up my patch cables of desired length ahead of time Do each subnet at a time (appears that each subnet are for different physical locations) Replace one cable at a time for each subnet It's easier to get forgiveness than permision?

  Read the article

• Unable to remove Read-Only attribute from folder in Windows XP

  - by elcuco

  I have this directory which I cannot remove the read only attribute from. The computer is running XP SP2 (or SP3, not sure) and the directory sits in a NTFS file system. Looking into the web I found this: http://support.microsoft.com/kb/256614 which tells that if the directory is "customized" it's treated as a system folder and thus "read only". I don't think this is a scenario in my case, but anyway it's not helping, their recommendation is more or less: attr -r -s /d /s d:\data and this is not working for me. Any other ideas? More info: The directory is served to an HTTP server (wamp) and the directory is an SVN check out. What happens is that the web server cannot write files into the directory (imagechace from drupal is you are really interested). Edit 2: The original post claimed that the directory sits on a VFAT FS, however I booted Fedora 11 from livecd and the partition is marked as NTFS. Edit 3: I left the company which I worked on, on which this situation happened... so I cannot fully close this question. But things get even worse: I tested the "attr -r" answer I put, it did not work for me, and now the developer said that it worked for her. A nice WTF moment. Probably a reboot helped... Sorry for loosing details. If anyone has the same problem, and one of the answers helps him - please comment.

  Read the article

• Can I have damaged a CPU ?

  - by Pascal

  Hey guys, This is a question I asked on Anantech forums, but I just discovered this community and think this question would fit right in. Here goes: I built a PC around a Q9550 1 1/2 years ago (MoBo is an Asus P5Q deluxe). Specs give 2.83GHz, OC'ed it to 3.40 GHZ without any problem (or so I thought) till 2 months ago. Cooling is provided by stock Intel Fan... 2 Months ago, I began to see random crashes, bios saying CPU overheat error... PC would reboot at OC'ed speed without any problem. Since last saturday and a few more crashes, PC won't reboot at 3.40 GHz, and even at stock speed (2.83 GHz), I got core temperatures of (60 C idle, 95 C under load) on the first two cores. This is the 4 core temperatures I am talking about, not the T-CPU which obvioulsy is lower. Fan is running at a steady 2000 RPM. Questions for you : 1. Is 2000 RPM the normal speed of the Intel fan or is my fan somehow broken (which could explain the overheating). In this case, any recommendation for a good fan for OCing ? 2. Hypothesis I fear is the right one: can the CPU have been slowly damaged over time by this OCing, meaning there is nothing much to do except waiting for it to die ? (As a side note, I am surprised that the 9550 is still around 300 $CDN here... Thought it would have been cheaper with all those i3/i5/i7 around). Any help or advice would be more than welcome...

  Read the article

• WSUS works, but checkhealth logs events 13042 12002 12012 12032 12022 12042 12052

  - by jobu1324

  Our WSUS server stopped working until the patch related to .NET 4.0 was installed, at which point clients started downloading and updating again. However, the WSUS mmc console occasionally disconnects when performing various tasks, such as running automatic approval rules; also wsusutil checkhealth creates the following events: 13042: Self-update is not working. 12002: The Reporting Web Service is not working. 12012: The API Remoting Web Service is not working. 12032: The Server Synchronization Web Service is not working. 12022: The Client Web Service is not working. 12042: The SimpleAuth Web Service is not working. 12052: The DSS Authentication Web Service is not working. Apparently there are many possible causes for these events. I'm looking for a way to figure out what is wrong, so that I can fix it.

  Read the article

• [metasploit] Has anyone gotten multi/browser/java_signed_applet to work?

  - by marc

  Welcome, Today i want test following exploit "exploit/multi/browser/java_signed_applet" on my Ubuntu 10.04 desktop using Metasploit framework. I'm following that guide: http://pauldotcom.com/wiki/index.php/Episode185 When im trying to start exploit, i got error: JVM not initialized. You must install the Java Development Kit, the rjb ruby gem, and set the $JAVA_HOME variable. [-] Falling back to static signed applet. This exploit will still work, but the CERTCN and APPLETNAME variables will be ignored. I have installed sun-java6-jdk, and gem install rjb And patch to JAVA look working because: ls $JAVA_HOME bin ext jre LICENSE README.html COPYRIGHT include lib man THIRDPARTYLICENSEREADME.txt If anyone, have any idea... Except installation of backtrack what is not possible... Because i need use it on my Ubuntu, (have to virtualize XP for test) regards

  Read the article

• Netgear GS724Tv3 and link aggregation Mac OS X Server 10.6.8

  - by Manca Weeks

  I need to link aggregate 2 sets of ports on the Netgear GS724T with my Apple server tower (latest generation). I have 2 built in ports and 2 ports on a PCIe ethernet card. It is not obvious to me how to properly configure the Netgear end. I have access to the Netgear box through its web interface, just don't know how to properly set the settings. I tried going to Netgear for help, but they said my software support has expired. I bought this unit on their recommendation - they say it is compatible with 802.3ad protocol. I cannot locate any references to this protocol in the manual and I noticed some people in formus say that this device is actually not compatible with 802.3ad and that Netgear is misleading potential customers by saying it is. Any help will be appreciated. Thanks, M My own answer - posted as edit because of restrictions on my user: OK folks, turns out one must use a Windows machine on this one or nothing makes sense. I was unable to get much farther than viewing the default inactive LAGs because in Firefox and Safari on Mac things don't make much sense - i.e. the Apply buttons (supposedly JavaScript) don't work. You can view the configurations, but none of the modifications you make stick. Then, in Switching - LAGs, choose the ports to include and make sure you switch the LAG type from Static to LACP and all is well. Haven't tested the performance of the config yet, but both sides appear to be happy with the configuration. Apple server says link active and so does the Netgear. Will report if any other discoveries. Thanks for all who read and to user84104 for responding. M

  Read the article

• Which is the best opensource IT infra management s/w?

  - by karthick

  I am looking for some opensource IT infrastructure management s/w which should be able to monitor, manage servers & pc's, network devices, printers etc and it should have patch management, software inventory, user activity data etc And I am planning to have it on a linux server and it should be manageable for both linux and windows machines. I have found many while googling, but I don't know which is the best one. So anyone please suggest me, which is the best one I am looking for?.... Thanks... Your help is greatly appreciated..

  Read the article

• performance block countries using iptables /netfilter

  - by markus

  It's easy to block IPs from country using iptables (e.g. like http://www.cyberciti.biz/faq/block-entier-country-using-iptables/). However I read that the performance can go down if the deny list get too large. An alternative is installing the iptables geoip patch or using ipset ( http://www.jsimmons.co.uk/2010/06/08/using-ipset-with-iptables-in-ubuntu-lts-1004-to-block-large-ip-ranges/) instead of iptables. Does anyone have experience with the various approaches and can say something about the performance differences ? Are there are other ways to block country IPs in linux which I did't mentioned above?

  Read the article

• Why can't I update Adobe Creative Suite?

  - by Lynda

  I am attempting to check for updates using the Adobe Application Manager on Windows 8 and I get this error: The update server is not responding. The server might be offline temporarily, or the Internet or firewall settings may be incorrect. I have seen this error before on Windows 7 and remembered that I needed to disable the Microsoft Virtual WiFi Miniport Adapter. I navigated to the correct place but the Miniport Adapter was not there. After a bit of searching across several forums I saw a recommendation to change <logLevel>2</logLevel> to <logLevel>10</logLevel>. I attempted that and again it still did not work. I have also tried disabling my anti-virus protection and disabling Windows Firewall. Neither worked. I am not sure what else to try or do at this point. Are there any other recommendations to solve this issue? Notes: I am running Windows 8 Pro using the Creative Cloud Version of CS6. I check for updates by choosing Help Updates from within any Adobe Application This issue was not present in Windows 7 before I upgraded to Windows 8 I originally posted this question on the Adobe Forums and received no help there.

  Read the article

• Do any well-known CAs issue Elliptic Curve certificates?

  - by erickson

  Background I've seen that Comodo has an elliptic curve root ("COMODO ECC Certification Authority"), but I don't see mention of EC certificates on their web site. Does Certicom have intellectual property rights that prevent other issuers from offering EC certificates? Does a widely-used browser fail to support ECC? Is ECC a bad fit for traditional PKI use like web server authentication? Or is there just no demand for it? I'm interested in switching to elliptic curve because of the NSA Suite B recommendation. But it doesn't seem practical for many applications. Bounty Criteria To claim the bounty, an answer must provide a link to a page or pages at a well-known CA's website that describes the ECC certificate options they offer, prices, and how to purchase one. In this context, "well-known" means that the proper root certificate must be included by default in Firefox 3.5 and IE 8. If multiple qualifying answers are provided (one can hope!), the one with the cheapest certificate from a ubiquitous CA will win the bounty. If that doesn't eliminate any ties (still hoping!), I'll have to choose an answer at my discretion. Remember, someone always claims at least half of the bounty, so please give it a shot even if you don't have all the answers.

  Read the article

• Cannot Update Adobe Creative Suit

  - by Lynda

  I am attempting to check for updates using the Adobe Application Manager on Windows 8 and I get this error: The update server is not responding. The server might be offline temporarily, or the Internet or firewall settings may be incorrect. I have seen this error before on Windows 7 and remembered that I needed to disable the Microsoft Virtual WiFi Miniport Adapter. I navigated to the correct place but the Miniport Adapter was not there. After a bit of searching across several forums I saw a recommendation to change <logLevel>2</logLevel> to <logLevel>10</logLevel>. I attempted that and again it still did not work. I have also tried disabling my anti-virus protection and disabling Windows Firewall. Neither worked. I am not sure what else to try or do at this point. Are there any other recommendations to solve this issue? Notes: I am running Windows 8 Pro using the Creative Cloud Version of CS6. I check for updates by choosing Help Updates from within any Adobe Application I originally posted this question on the Adobe Forums and received no help there.

  Read the article

• Which version control should I use for my configuration files?

  - by rakete

  I want to store some of my configuration files (~/.emacs.d/, .Xdefaults, etc. linux $HOME stuff) in version control so I can easily sync them with my notebook/workplace and see my past changes and revert to them should the need arise. So far it seems to me that there are quite some people using git for this and I think that I too want to use a distributed vcs for this (if only to get more used to them) but I can't say that I am very experienced with all things dvcs. I did use darcs and git briefly and so far I can say that I really like the way git handles branches, and I think the possibility to have different branches within the same directory is especially useful for my use case. Darcs on the other hand has cherry picking of patches, which too is quite the convenient feature when managing configuration files (at least I assume it is). So, what would you recommend to use? And what would be your reasoning for your recommendation? What other vcs with nice feature that I haven't mentioned exist and would make a good vcs to store configuration files and why?

  Read the article

• Remote Desktop Client in Windows 7 Full Screen Issue

  - by Langdon

  I'm running Windows 7 Home Premium on a new laptop and I'm having one of the most annoying issues with the RDP client (mstsc.exe). If I restore the full screen RDP window, I lose the ability to go back to full screen. The only way I can get it back is by running a new instance of mstsc, setting the option back to full screen, and connecting again. I don't have this problem on any other machine (granted, this is the only copy of Home Premium I have). Is this a known issue? Is there a patch/fix? It's pretty obnoxious, I'm having to train myself to not use the restore button and only minimize it (which limits uses).

  Read the article

• firefox: getting access to the list of tabs/windows to restore on startup

  - by robb

  Sometimes ffox fails to restore the previously open tabs/windows. This might be happening when some of the urls to be opened are no longer reachable (e.g. behind a vpn) or after the underlying OS (Windows) has been forcibly restarted (e.g. to complete an automated patch installation). Anyway, after restarting, can this list of urls be recovered somehow? Say for example, I was daft enough to have clicked on "start new session". Can I still get access to the old list of open urls? There is the browser history of course, but it contains a lot of stuff - the urls that were open when ffox last exited are not obvious. It would be neat if they were marked in some way - tagged for example. .robb

  Read the article

• Aironet 1130AG and WPA (not WPA2)

  - by DrZaiusApeLord

  Is it possible to enable this WAP to do WPA1? I've played with all sort of settings, but no matter what I set it to, it does WPA2. Even if I choose TKIP as the cipher. I need WPA for compatibility reasons. I'm running 12.3(7)JA1 firmware. Any advice would be greatly appreciated! I'm trying to get this company away from WEP, but WPA2 offers too many problems with their visitors (XP SP2 clients need to install patch, etc). I'll probably add a radius while I'm at it, but would love to get WPA + AES going. Or at least WPA + TKIP.

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >