Search Results

Search found 3469 results on 139 pages for 'progress indicator'.

Page 75/139 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• How does voltage fluctuation affect a laptop

  - by user45535

  I own an Acer Aspire 3680. In the past 2 years, I have given, my laptop for service due to the same kind of problem. Last year at the same time, I gave my laptop to the service center. They repaired it and I managed to ask them this question: Why does this problem happen. How can I prevent it? They said, that due to voltage fluctuations, something has gone wrong in your laptop. They actually were hesistant in mentioning as to which part they changed/repaired. Now recently the same problem happened and again I gave it to a service center to get it repaired and they also said, this is caused due to voltage fluctuation. My Question is: Due to Voltage fluctuation which part of the laptop can get affected. How can I prevent this from happening. Laptop Symptoms before I gave to service: When I plug in the adapter for charging the Green Light blinks and the laptop doesn't turn on. Neither does the charging indicator indicates the light, while charging.

  Read the article

• WD Passport Won't Mount

  - by Scott7278

  My WD Passport won't mount. However, it turns on when plugged into my macbook and doesn't make any strange noises. It took a small fall (just a few inches and it was on my couch) and I'm very concerned about physical damage. When I open up disk utility it shows the root 500 GB WD My Passport drive which seems to be OK when I verify it and repair it. However, the "External Hard Drive", the directory underneath the "500 GB WD My Passport drive" is grayed out. When I verify the External Hard Drive it says it needs to be rapaired. When I try and repair it it gives me the following message and does not seem to progress: "Updating boot support partitions for the volume as required." Is there hope for me recovering my data? I stupidly have important data on it that I don't have anywhere else.

  Read the article

• System stuttering caused by hard drive

  - by LukLed

  My system keeps freezing for about 1-2 second every time I try to do something. For example, when I enter URL in browser, it freezes and starts working after few seconds. It is probably related to hard drive. I installed HD tune and when benchmark is in progress, causing constant disk use, everything works fine in background, there are no lags. What can be the reason of this issue? My hardware is Acer Aspire 7740G-6969 running on Windows 7.

  Read the article

• Gateway laptop module bay light repeating 12 flashes - what error is that?

  - by Simurr

  I have a Gateway M465-E laptop currently running fine with a T2300E Core Duo installed. I wanted to upgrade it to a Core 2 Duo. My brother has the same model laptop and that took a Core 2 Duo (T7200) just fine. Picked up a T7200 on ebay and installed it. Normally when booting all the indicator lights flash once and the fan spins up before the machine actually starts to POST. With the T7200 installed all the lights flash and the fan spins up, but the module bay activity light flashes 12 times repeatedly. I'm assuming this is an error code, but can find no information about it. There are no beep codes. I've removed the ram, HD, Bay module and no change. Switched back to the T2300E and everything works fine. Anyone know what that error code is? The motherboard was actually manufactured by Foxconn if that helps. Update 1 Returned the CPU as defective. I tested it in 3 M465-E's and all of them did exactly the same thing. I still have no idea what the error code is. I'd still like to know for future reference. Perhaps I should try removing the CPU from one of them and see what happens.

  Read the article

• Restoring Mac-bootcamp-windows-partition image to Windows machine

  - by jpwagner

  Hi, I'm running Windows XP sp3 on my mac using bootcamp. Objective: I'd like to move this partition to a windows machine. This is what I tried: 1. create image using winclone 2. restore drive to disk partition on windows machine using paragon 3. reboot from new partition Results: it attempts to boot in XP (windows flag and progress bar load screen) but then gives me the old BSOD. safe mode just hangs while loading. (I then uninstalled KB977165 on a hunch, but that did nothing to help the issue.) Any ideas, advice, etc would be greatly appreciated. Thanks!

  Read the article

• In linux: how to exit a program but not kill it?

  - by biomed

  I use Ubuntu 10.10 and I have a python program (mnemosyne) that I synchronize the data files using dropbox. If I forget to close (exit) this program. Here is my problem scenario. I leave the program running at home and go to work but if I open the program at work and work on it the data file is changed and I loose my progress at home when I exit (it automatically saves) when exitimg. I thought I could create a cron job to automatically close mnemosyne every morning regardless os me remembering to do it or not but if I use kill the program exits without saving the datafile and I end up with a tmp file and an error message when I restart it. Is there a better way of sending the exit signal to this program emulating me clicking fileexit menu option. Thanks

  Read the article

• Any FTP clients for Mac OS X that support upload via temporary filename?

  - by Chris582

  Hi, does anybody know of a FTP client (for Mac OS X) that supports uploading to a temporary filename? When overwriting a file on the server, most FTP clients first empty the file and then proceed to upload new content. (Which is how FTP is supposed to work, so everything is fine.) However, what I would like to see is that the FTP client uploads content to a temporary file and once all the content is on the server, replaces original file. This is good feature, because existing file is upgraded almost instantaneously; otherwise, it would be "broken" while the upload is still in progress. On Windows, this feature is available in WinSCP, but I have not found any options for Mac, so far. Any recommendations?

  Read the article

• Win7 XP mode install fails with cryptic error

  - by MAW74656

  Trying to install XPmode on Win7 Professional 64-bit SP1, but getting an error. I downloaded XPMode, Virtual PC and the update as specified here: http://www.microsoft.com/windows/virtual-pc/download.aspx. When I open XP mode for the first time it goes into the setup ("Setting up Windows XP Mode for first use..."; pick your VM password, etc.), then it runs through the progress bar until almost the end (99%?). At that point I get the error: Could not complete Setup. Please try again. Whats going on here? I've uninstalled Virtual PC and xpmode, and reinstalled in several different orders, no luck. Is there some log file that will tell me whats happening? Theres nothing showing up in the Event log that I can find. How can I fix this?

  Read the article

• How to specify console (or primary display) for video adapter?

  - by Igor Zinov'yev

  I have an ASUS ENGT440/DI1GD5 video adapter which has three output ports: D-Sub (HD-15), DVI and HDMI. I am using both the D-Sub and DVI ports, but my main monitor is connected to the DVI output. Everything works fine except for which monitor is designated the console during boot. The video adapter seems to prefer the D-Sub output for the console. When both the VGA and DVI monitors are connected, then the VGA monitor always becomes the console which displays the motherboard logo, POST information and booting progress. When only the DVI monitor is connected, then it becomes the console as desired. How do I make the video adapter always use the DVI output (instead of the VGA port) for the console while booting?

  Read the article

• OS X software updates download but don't install

  - by ridogi

  I've got three 10.6 computers that won't install OS X updates. Checking for new software will show about a dozen updates (Security updates, Safari, iPhoto, printers, etc) and if choose install it downloads them. After downloading and then clicking restart the computer sits at the purplish sky desktop with no progress bar, and then after about 3 minutes it goes back to the login window (without ever installing or restarting). If I then select check for updates the same updates will all be presented and I can repeat the process. Manually downloading and installing an update such as 10.6.8 combo updater works as it should, and then check for updates no longer presents that particular update as an option. This seems to be the result of some setting or 3rd party application as I've got 3 out 7 computers experiencing this exact same problem. What could cause this and how can I fix it?

  Read the article

• Outlook and exchange 2010 stalls email

  - by lbanz

  User found an old pst file which is around 15GB and imported to his exchange mailbox. It imported fine. Outlook client starts syncing the emails to exchange. It stalls and then the user will need to reopen the client for it to sync again. The client doesn't crash and still continues to receive new emails but it just doesn't sync the old emails. Sits on Updating folders but doesn't do anything. Shows no sync or conflicts in the client. No errors on progress and Outlook network connection seems fine.

  Read the article

• Monitoring the wall time of a process on windows?

  - by Sean Madden

  Windows Task Manager has the ability to show the current CPU time of any given running process on windows, is there any way (not necessarily through Task Manager) to get the current wall time of a process? An example, let's say I have a script that reliably runs for about 45 minutes. Without adding a progress bar to the script, is there any way to figure out for how long it has been running? The math behind this seems pretty straight forward; WallTime = CurrentWallTime - WallTimeProcessStarted. Likewise, since the math is so simple, is there anyway to get the time that a process was started at?

  Read the article

• Browser which shows what's been downloaded so far regardless of formatting and layout ?

  - by Mick

  Every now and then a website becomes super-slow (but not broken) because there are too many people looking at it at the same time. When I try and view such a site, say with Firefox, I can see that it is downloading all sorts of components of the site because of the progress information printed at the bottom of the window and I'm sitting there thinking "If only the browser would show me what it's got so far. I don't care if its a jumbled mess, I just want to see what you've got". Does any browser offer such an option?

  Read the article

• SBS DC DNS entries going missing?

  - by Chris W

  I've been looking at a problem on a friends SBS (2003) server where the client PC's aren't able to connect to the server with a variety of errors reported. Checking the server itself the only indicator of an issue is an error 5782: Dynamic registration or deregistration of one or more DNS records failed with the following error: No DNS servers configured for the local system. Running a dcdiag reports that there are no DNS records registered for the DC so I fixed the problem by doing a netdiag /fix after which the dcdiag comes back clean and clients are ok again. It happened a few weeks ago as well and the same fix solved it. What are the possible causes of the DC DNS entries going missing? Is this a config option that needs tweaking or could it be solved by something simple like scheduling the SBS server to re-boot periodically? The only change they can think of that was made near to the time of the first instance of this problem occurring is that RRAS was started up to allow for a VPN connection from a home user. NB - The server is setup with a pair of NICs in a team so the server has a single virtual NIC providing both LAN/WAN connections to it. An external hardware firewall is in use rather than the windows firewall.

  Read the article

• Does a high run queue length average result in poor performance for a web server?

  - by Domino

  I'm trying to narrow down the list of suspects of web servers that perform moderately well most of the time with occasional bouts of poor performance. I'm analyzing the data collected and summarized by sar. I've noticed a few things, one of which is high number of tasks in the run queue. 10:15:01 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15 blocked 10:25:01 AM 2 150 0.05 0.05 0.06 0 10:35:01 AM 4 149 0.08 0.12 0.09 0 10:45:01 AM 6 150 0.13 0.19 0.15 0 10:55:01 AM 1 150 0.08 0.10 0.13 0 11:05:01 AM 4 150 0.20 0.35 0.23 0 11:15:01 AM 3 149 0.02 0.09 0.15 0 11:25:01 AM 7 149 0.04 0.05 0.11 0 11:35:01 AM 4 150 0.14 0.15 0.13 0 11:45:01 AM 6 150 0.27 0.18 0.16 0 11:55:01 AM 5 150 0.08 0.10 0.13 0 12:05:01 PM 3 149 0.35 0.40 0.26 0 12:15:01 PM 19 155 0.02 0.10 0.16 1 12:25:01 PM 2 150 0.00 0.07 0.12 0 12:35:02 PM 3 151 0.58 0.24 0.17 0 12:45:01 PM 8 150 0.02 0.13 0.15 0 12:55:01 PM 6 149 0.81 0.29 0.18 0 01:05:01 PM 3 148 0.00 0.09 0.13 0 01:15:01 PM 7 149 0.00 0.04 0.11 0 I believe these are 10 minute averages. Is this an indicator that the web server is not performing as fast as it could if the average run queue length was lower?

  Read the article

• VMware player suspends on screensaver

  - by Chad

  I have this problem with my VMWare player. When my host operating system either goes into screen saver or I lock the work station with Windows Key + L. VMWare player pauses or halts everything. So when i come back to the computer and there is a background task working inside the virtual machine it does not progress until i've actualy loged back on. Is there any way to stop this behaviour with VMWare player and keep it running in the background even when the screen saver or the work station is locked? Version of VMWare is: 3.0.0 build-203739

  Read the article

• SSH & SFTP: Should I assign one port to each user to facilitate bandwidth monitoring?

  - by BertS

  There is no easy way to track real-time per-user bandwidth usage for SSH and SFTP. I think assigning one port to each user may help. Idea of implementation Use case Bob, with UID 1001, shall connect on port 31001. Alice, with UID 1002, shall connect on port 31002. John, with UID 1003, shall connect on port 31003. (I do not want to lauch several sshd instances as proposed in question 247291.) 1. Setup for SFTP: In /etc/ssh/sshd_config: Port 31001 Port 31002 Port 31003 Subsystem sftp /usr/bin/sftp-wrapper.sh The file sftp-wrapper.sh starts the sftp server only if the port is the correct one: #!/bin/sh mandatory_port=3`id -u` current_port=`echo $SSH_CONNECTION | awk '{print $4}'` if [ $mandatory_port -eq $current_port ] then exec /usr/lib/openssh/sftp-server fi 2. Additional setup for SSH: A few lines in /etc/profile prevents the user from connecting on the wrong port: if [ -n "$SSH_CONNECTION" ] then mandatory_port=3`id -u` current_port=`echo $SSH_CONNECTION | awk '{print $4}'` if [ $mandatory_port -ne $current_port ] then echo "Please connect on port $mandatory_port." exit 1 fi fi Benefits Now it should be easy to monitor per-user bandwidth usage. A Rrdtool-based application could produce charts like this: I know this won't be a perfect calculation of the bandwidth usage: for example, if somebody launches a bruteforce attack on port 31001, there will be a lot of traffic on this port although not from Bob. But this is not a problem to me: I do not need an exact computation of per-user bandwidth usage, but an indicator that is approximately correct in standard situations. Questions Is the idea of assigning one port for each user is a good one? Is the proposed setup an reliable one? If I have to open dozens of ports for many users, should I expect a performance drawback? Do you know a rrdtool-based application which could make the chart above?

  Read the article

• Trying to reinstalling .net framework 4 on windows server 2003 SP2

  - by LBR

  I had a problem with an application that was using .net framework 4. So I tried to fix the installation but it didn't solved. So I proceed to uninstall the framework and install it again. But then the problems started... the setup just wouldn't finish to download the framework. So i tried the full installer, and then it got stuck (freezes) at "installing client profile"... The server works well but the installation progress bar just stays at the same place (but the "wheel" keeps turning, like it was doing something, but stays like this for hours...) I tried the .net clean unistall software but the problem remains. I'm all out of ideas... I've searched the web but couldn't solve the problem with any solution I found... Any ideas on how to force the installation?

  Read the article

• Virtualbox PUEL Interpretation

  - by modernzombie

  Sorry if this seems like a lame question but I want to be sure before making a decision. The Virtualbox PUEL license says “Personal Use” requires that you use the Product on the same Host Computer where you installed it yourself and that no more than one client connect to that Host Computer at a time for the purpose of displaying Guest Computers remotely. I take this to mean that if I want to setup a development server (web server) that's only used by me to do my work this falls under personal use. But if I make this server available for clients to connect to the websites to view my progress this is no longer personal use also meaning that using Vbox to run a production web server is also against the license. Again sorry if this is a dumb question but I find it hard to follow the wording used in licenses. I know I could go with OSE but I have not looked into VNC versus RDP yet. Thanks.

  Read the article

• Why aren't there 8gb RAM modules yet?

  - by user49951

  Why is RAM module development seemingly stuck at the same size for a while now (a couple of years)? I bought 2x2gb modules 2 years ago, and now it's all the same size, with prices even bigger. I want more memory, because I work a lot on my computer and I just need it. What is going on? Hardware/memory progress was being made constantly until these couple of years, and I'm a big computer user for over 15 years. Why isn't here 4gb/8gb modules yet? I would gladly replace my DDR2 motherboard for a DDRX one if it had at least 4gb DDRX modules for a reasonable price. Now we have a situation with very cheap usb drives reaching 64gb size, and a ram modules with pathetic 2gb size. Sounds like some sort of conspiracy.

  Read the article

• Windows 7 strange boot issue

  - by JL

  Recently I installed an SSD drive, its now my primary boot drive (OCZ Vertex Turbo 60GB). I'm running Win 7 (64bit). Now I am not sure exactly where the fault lies, but when I do a restart from within Windows, the computer will boot and enter into the loading windows portion, however won't progress beyond there. My solution is to manually hit the reset switch, and then when it boots it enters into a windows menu that offers a start up repair or start windows normally. I select start windows normally, and then it boots fine. I am not entirely sure why I can't just restart the computer from windows normally though. The SSD drive works perfectly, and not even sure if it is the cause to this problem. Any ideas on this?

  Read the article

• Windows Command queue?

  - by Stefano

  i'm thinking if does exist some kind of software that can put in a queue a bunch of windows commands... for example i can say to first copy some file somewhere, then rename those, then delete the old files, then edit one of them etc.... without waiting the effective execution of any of those passages.... this could be useful when copying big files that take a lot and i don't want to sit in front of the computer keeping the eyes on the progress bar... does exist anything like this?

  Read the article

• Why is execution of batch files different between drag & drop and from command line?

  - by Dharma Leonardi

  Ok, so I've been trying to figure this out for hours with no progress. I have created a batch file to get details of a VHD. Everything runs fine and produces the expected results when run from the command line in a command prompt. However, when I use drag and drop from file explorer (dragging a vhd file and dropping onto the batch file) the batch file runs without errors but the output (VHD.INFO) is empty. I'm stumped. Edited to only include the behaviour: @echo off cls setlocal enabledelayedexpansion set "_PATH.THIS=%~dp0" echo HELP | diskpart > %_PATH.THIS%OUTPUT.TMP TYPE %_PATH.THIS%OUTPUT.TMP PAUSE To demonstrate the different behaviour, please run the batch file from the command line once (works) and also run the batch file by double clicking in file explorer (failure in all piping commands).

  Read the article

• What sort of things can cause a whole system to appear to hang for 100s-1000s of milliseconds?

  - by Ogapo

  I am working on a Windows game and while rendering, some computers will experience intermittent pauses ("hitches" for lack of a better term). When profiled they appear in seemingly random places in the code. Eventually I noticed that it wasn't just my process that was affected, but (seemingly) every process on the system. All of the threads in my application hitch at once. The CPU utilization drops during these hitches and it appears as if most processes make no progress. This leads me to believe this may be an Operating System or Driver issue, but it only occurs while playing the game (and only on some systems). What sort of operations might the operating system be doing that would require the kernel to pause all user threads and block. Some kind of I/O? At first I thought of paging but my impression is that would only affect a single process, no? Some systems in use: Windows, DirectX (3d), nVidia cards (unknown if replicates on ATI), using overlapped io for streaming

  Read the article

• Unable to connect to sharedfax error

  - by Owl

  I'm running SBS2k on a machine with a 56k modem for all outgoing faxes. We have a terminal server running server 2003 enterprise and in printers the sharedfax shows "unable to connect status". When you right-click, properties, it gives you an error saying the spool service is not running and you cannot view properties. The spooler service is indeed running on the 2k3 server because I can view the other printer's properties..and on 2k I show the Microsoft Shared Fax service AND Print Spooler as started. Here's the tricky part, I can add the shared fax printer on a domain computer locally (Windows XP) and it will show ready status and I can send faxes, they show up on the 2k server's fax console manager as in progress. I've sent a couple from a few different workstations today successfully, but still unable to send from 2k3 terminal services.

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >