Search Results

Search found 66534 results on 2662 pages for 'document set'.

Page 750/2662 | < Previous Page | 746 747 748 749 750 751 752 753 754 755 756 757  | Next Page >

• Reach self hosted server from LAN

  - by Freefri

  I have a self hosted server with Apache2 pointed with the domain example.com. I have also some virtual servers www.example.com, cloud.examle.com, etc. This server is in my LAN, and when I try to acces to my server within the lan throw www.examle.com y get my router's configuration page. From outside the LAN www.example.com and cloud.examle.com works properly. From inside the LAN 192.168.1.33 (server internal IP) shows the default webpage (www.examle.com), but I can not get cloud.examle.com I also have a LAN name server in 192.168.1.33 with bind9. I set up my gateway 192.168.1.1 with my LAN-NS as primary NS I solve this problem creating a new dns zone in the NS. This are my config files: ;ZONE-1 $ORIGIN . $TTL 86400 ; 1 day home.lan. IN SOA server.home.lan. hostmaster.home.lan. ( 2008080901 ; serial 8H ; refresh 4H ; retry 4W ; expire 1D ; minimum ) home.lan. IN NS server.home.lan. $ORIGIN home.lan. ; Set the address for localhost.home.lan localhost IN A 127.0.0.1 router IN A 192.168.1.1 server IN A 192.168.1.33 mypc IN A 192.168.1.132 ;ZONE-2 $ORIGIN . $TTL 86400 ; 1 day example.com. IN SOA www.example.com hostmaster.home.lan. ( 2008080902 ; serial 8H ; refresh 4H ; retry 4W ; expire 1D ; minimum ) example.com. IN NS 192.168.1.33 $ORIGIN examle.com. localhost IN A 127.0.0.1 www IN A 192.168.1.33 cloud IN A 192.168.1.33 My DNS and my names are working properly now My question are: What do you think about my solution? Can I change the A zone with CNAME to server.home.lan (this is the domain in the LAN to the server)? How can I set a default IP for all my whatever.example.com?

  Read the article

• SQL Server Reporting authentication not working

  - by Keith

  I'm not exactly sure what went wrong but our SQL Server Reporting Services authentication is no longer working correctly. When I try to load the site, it asks for a username and password, and mine doesn't work. I checked the service and it is using the NT AUTHORITY\NetworkService to logon. Since it is using NetworkService to logon, I read on Microsoft's site that I need to use these settings in the RSReportServer.config file: <AuthenticationTypes> <RSWindowsNegotiate /> </AuthenticationTypes> <EnableAuthPersistence>true</EnableAuthPersistence> Which is what I have set. It still asks for the password. When I set the Authentication to RSWindowsNTLM, it does login but everytime I click on a link, it asks for a password (the password doesn't seem to prevent anything from loading). Anyone know what is going on here? I'm not an expert to SQL Server so I may be missing something.

  Read the article

• Proxy server on windows with SSL encrypted exchange with client

  - by Syffys

  I want to set up a classic proxy server (HTTPS, HTTPS, SSH, FTP, etc...) on a windows platform, but I need the following features: password authentication for clients data exchanged between clients and server to be SSL encrypted I've been trying to set this up various application to get this result, but without success so far: Squid for windows ccproxy wingate Alternatively, an other solution would be an HTTP SSL tunnel encapsulating an unencrypted proxy connection between clients and the server. I've spent a lot of time without any result so far, so I'm wondering if anyone faced this kind of issue. Thanks in advance!

  Read the article

• How do I add client computers to a Windows SBS 2008 domain?

  - by Jonas

  We have a LAN and the router is the DHCP server. We have a server with Windows SBS 2008, it has the IP address 192.168.1.2 while the router has the IP address 192.168.1.1. I have set "DNS Relay" on the router to 192.168.1.2. I have tried to add a client computer to the SBS domain by visiting http://connect from the client computer. But that page doesn't exist. I can visit http://192.168.1.2/ then the default startpage for IIS7 is shown. I'm logged in as a local Administrator on the computer that I tries to add to the domain. How do I add the client computer to the SBS 2008 domain? The router is an D-Link DFL 200, and I have now set the "DNS Relay" to "Use address of LAN interface" instead of a specific IP-address. But it doesn't work.

  Read the article

• How can I automate my Linux computer to power off (and on preferably) under certain circumstances?

  - by Ashimema

  OK, So a little background; I've been using Windows Home Server as a Backup Appliance, Media Server and Share Server at home for some time. I decided it was costing me allot of juice so very early on added the "Lights Out" add-on to ensure it was only running as and when needed. I'm now looking to switch to a Linux based server and I'm looking for a similar tool/set of tools for advanced power management. Now the question; Anyone got any all-in-one suggestions (i.e with client parts for both Windows and Linux and a server part for the Linux server), or can anyone simply verify that I'll need to set-up all the individual bits for this myself separately? (A tool similar to "[SmartPower][2]" but for linux would be a great start)

  Read the article

• Samba file shares - ownership of folder accessible for 1 group verified by MS active direcctory

  - by jackweirdy

  I have a machine set up to share a folder /srv/sambashare, here's an exerpt of the config file: [share] path = /srv/sambashare writable = yes The permissions of that folder are set at 700 and it is owned by nobody:nogroup at the moment. The problem I face is probably a simple one but I'm fairly new to Samba so I'm not sure what to do. The contents of the share should be accessible to a particular user who will authenticate with domain credentials, checked against Active Directory by kerberos. I haven't got kerberos configured yet as I wanted to test the share as soon as samba was configured, albeit basically, to ensure that it works. I've noticed that I can only access & write to the share when the folder is either owned by the user logging in or made world writable. The key issues are that this folder can't be world writable as it contains sensitive stuff, but at the same time can't be owned by a user or group since they come from the AD server. Anyone know what I should do?

  Read the article

• Windows 7 with two network cards doesn't route traffic

  - by Tomek

  I have simple task to do: I have wni7 with two nics.I want to connect another comp(osx) to win7 through second nic to connect it to internet. I already changed the registry. Win7 interface with 192.168.2.1 has no gateway set (no point to do that) OSX interface with 192.168.2.2 has gateway set to 192.168.2.1 I do not add any routes on win7, every thing seems to be already there network on second nic is detected as "undefined network" (probably effect of no gateway) i can achieve any connectivity to internet from OSX only by enabling network connection sharing on nic with 192.168.2.1, but it enables NAT and I'm interested only in pure routing without nat(it's a setup for some research). firewall is off. It seems to me that win7 refuses to forward packets for some reason. Perhaps "undefined network" and NLA service is to blame, although i couldn't find any info about that. Below ascii schematics of my setup: internet<--router(192.168.1.1)<--(192.168.1.1) WIN7 (192.168.2.1)<--(192.168.2.2)OSX Thanks

  Read the article

• How to login without entering username and password

  - by torbengb

  I'm a newbie running Ubuntu 9.10. I have two users (wife and me), and each user's screensaver is set to lock so that on wakeup, we get to choose which user's desktop to go to. However, Ubuntu requires a password, so this is pretty tedious. I'd like to switch users without entering any password. I know about this trick that works for the boot login, but it doesn't deal with multiple users. Is it possible to set empty passwords for users in Ubuntu, or skip the password in other ways? (I'm expecting real Linux users to suggest that passwordless users must not get any rights and there be an admin user with a strong password. Yes, you're right. But that's not what this question is about. Thanks.)

  Read the article

• Setting up a LAN connection in Windows

  - by user30780

  I'm looking to set up a LAN connection under Windows XP. What are the steps or instructions I should follow to make this work?

  Read the article

• Automate opening HTML and printing to PDF

  - by craigpatik

  I need a way to automate the following process in Windows 7: Open an .html file in Internet Explorer Print to PDF Save the PDF with a patterned file name (i.e., original_name_YYYY-MM-DD.pdf) Ideally, I could drag and drop several files or open a whole folder of files at once and a PDF would be created for each one. A command line solution is also acceptable. The files have to be opened in the browser because parts of the page are rendered with JavaScript on page load. In other words, if you simply right-click on the file in Explorer and choose "print", the resulting file is not the same because the JS didn't run. If it helps, Internet Explorer can be set as the default browser, and a PDF printer can be set as the default printer.

  Read the article

• How do I recover a RAID 1 volume on Mac OS X (10.7)?

  - by Avry

  I have a Synology NAS that I've set up with RAID 1. The device is set up with two drives, both the same size (i.e. 500 GB each), formatted in ext3, as a RAID 1 volume (i.e. even though the total capacity is 1TB, I effectively only get 500 GB). In the case of a device failure where I can only access one of the drives, how can I recover my data? The solution I'm looking for is something like: 'Put the working drive in an enclosure, and use <some software> to recover your data.'

  Read the article

• Multiple EyeFinity Display groups

  - by Shinrai

  Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

  Read the article

• Multiple workstation setups using virtualization - best solution

  - by Vazgen

  I'm looking to set up a server for my small startup. I have a few employees and would like to use my computer at home to provide them all with workstations. Each workstation should have the same collection of software installed but each user's workstation should be completely separate from the others. I need each user to be able to remotely log in to their workstation (using TeamViewer or something like it) and I want to be able to monitor their workflow from my screen. I suppose I need a virtualization solution. Can anybody recommend one with easy set up, I'm not a server administrator.

  Read the article

• Well....a ghost lives in my server...

  - by tsgiannis

  Hello to every body and greetings from Greece I have a rather unusual situation and i am running out of ideas. I have this old server (IBM x205 - P4 2.4Ghz,3xSCSI 36gb) and i was about a year ago i decided to use it as an additional domain controller,fax & file server...for this task i had a Delock 70154 SATA card along with 2x320 SATA II HDDs Everything was going super smoothly until about 3 weeks ago. I was on a trip and i was informermed when i got back that the server was found frozen...well i considered it was a glitch since a simple powerdown power up fixed everything.Again 2 weeks ago another freeze situation....it got suspicious but again power down power up everything was running.... Last again it frozen and when i power it up it came with a message that the Domain services could not start due to NTDS corruption....booting in safe mode revealed that there was an issue with the SATA Raid (degraded). After a lot of searching i degraded the server...cleaned Active Directory and pulled both HDDs out (one of these was really BAD ) and recovered my files (i had some problems with ho Delock handles the redudant HDD). Right now my server is vanilla simple...with only what the factory installed and here is where the fun begins. Everyday when i arrive at the office i find this particular machine dead..and i mean total dead...just a black screen and nothing else...the cpu fan is working ,the psu is working .keyboard and mouse are dead(they also lock my kvm) ...network is dead.... the machine is DEAD. I power it down forcilly ...i power it up and for the 8 hours i am in the office it works,either idling or running some kind of diagnostic...when i leave the office after some time..it maybe half an hour ...it maybe 4 hours the machine dies...at least this is the information the event log shows (" the previous shutdown at xx:xx:xx was unexpected) Well i must admit i am runnig out of ideas.... I have tried Memtest....nothing Passmark burn in test.....nothing Carefull study of the event log.....nothing Set Instead of restart..BSOD....nothing Power sceheme to sleep...all set to never. i know there are a lot of other tools that heavily stress a machine like occt but .... the machine is old...today i will give them a try nevertheless ..... One idea is to reformat it...but ... i really like to find what is causing this because i could get to a situation that everything is working for a while and kaboom...one day again is dying.. I really need a helping hand and every opinion / idea is well welcomed.... iknow the obvious solution is to never leave the office but....i have a life...sory server...:) P.S this situation with the machine dying some time after is going on for about one week...everyday i would set either the RAID to rebuild....or to copy/recover files and while everythig was working

  Read the article

• outgoing mail for web app (multiple domains as sender)

  - by solid

  I have a web app "myapp.com" that users can use to set up their own websites. Our application is written in php and should be able to do the following: send mails to our own users "from: [email protected]" send mails from our clients to their clients "from: [email protected]" We don't need to take care of incoming mails, just send out mails with the correct from and reply-to addresses. We cannot make this work using Google Apps (limited to our own domain in the from-field) and we cannot make google apps or google apps domains for all our clients, so we are looking for another simple to manage and set up solution. Does anyone have experience with this, please let me know! Thanks

  Read the article

• Stupid question: prevent file from being changed under linux

  - by Josh

  Ok. Stupid question. I have forgotten what this is called and without remembering the name the search function on the site and on google is failing me. What's the command under linux to mark a file as "locked"/to prevent any changes from being made to it? I'm not talking about chmod. There's a property that can be set (again the name escapes me at the moment) which prevents even processes running as root from changing a file. What is this called and how do I set it?

  Read the article

• Hyper-V Virtual Disk Creation Taking Forver

  - by mnemosyn

  After some struggle, I finally managed to set up Hyper-V 2008 R2 on our server. So I connected to it using the Hyper-V Manager from a Windows 7 client and used the "New Virtual Machine Wizard". I set up a 350GB virtual hard disk. So I hit the "finish" button and the Hyper-V manager has been working for 24hours now, showing merely a dialog "Creating Disk". A console on the Hyper-V still reports 99.9% free space on the HD, but the machines HD LED flashes from time to time (making a rather idle impression, it's not flashing frenetically). Does this usually take this long? Is there a way to find out whether it's still working or just idling? Should I repeat the process? Guides on the net tell me to be patient, but 1d seems a bit extreme!?

  Read the article

• Exchange 2010 sending old Out of Office message

  - by Tatas

  We are just about done with our migration from Exchange 2003 to 2010. I have a user who has been migrated to the new system that is now out on medical leave. He has gone into OWA and set up his Out of Office notification. The good news is that an Out of Office message is sent, the bad news is that it appears to be sending an old outdated message from back when the user was on Exchange 2003, and not honoring the new message set up in OWA. The user has also tried setting this up in Outlook 2010 as well with the same behavior. I have a feeling that this is related to the old public folders (didn't they contain OOF messages?) still lingering around our Exchange org. Any ideas?

  Read the article

• What is the best way to setup a heartbeat agent for failover between two VMs?

  - by EGr

  I have two VMs in VirtualBox that use NAT for their network adapters. They are both getting the same IP address, so I will need to reconfigure that; but knowing that, is it possible to set up a heartbeat agent to failover an apache server if one of the two VMs go down? The way I pictured it would be that the webserver would be able to be accessed externally via :80. No matter what VM was running, I would be able to access the website at that IP/port since failover would be setup. I'm running into trouble setting up IPs when the network adapters are set to NAT, and people have told me that I shouldn't be setting the IPs in this configuration. So what should I do to achieve what I'm looking for? Is it even feasible?

  Read the article

• authenticating to exchange 2010 smarthost?

  - by Richard Hansen

  I have a postfix mail server that should relay all outgoing mail to an Exchange 2010 server (the Exchange box is my smarthost). I have administrator access to the Exchange 2010 system, but I'm not very familiar with it. How should I set up authentication on the Exchange 2010 system? I guess I could add a standard user with a mailbox on the Exchange box, then configure my postfix box to log in to port 587 to relay mail. That option doesn't feel right -- it seems like there should be way to do server to server authentication, not just client to server authentication. Is there? If so, how would I set it up?

  Read the article

• Why am I unable to send an attachment with Outlook via SMTP that I am able to send via Gmail / Google Apps?

  - by cwd

  I have Google Apps installed and I have tried to set up Outlook 2007 to send messages via SMTP. I followed the guide, selecting what I believe are all the correct settings. Yes, I am using POP for incoming, that is intentional but I don't believe it should affect outgoing messages. When I log into gmail (google apps) for my company, I can send a message that has an 8MB attachment (pdf file, not zipped or anything) and it sends fine. However, when I send the same message in Outlook with that same 8mb attachment it fails. Why am I unable to send an attachment with Outlook via SMTP that I am able to send via Gmail / Google Apps? The message headers are (some info omitted for privacy): Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 552 552 #5.3.4 message size exceeds limit (state 17). ----- Original message ----- DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=company.com; s=google; h=from:to:cc:references:in-reply-to:subject:date:message-id :mime-version:content-type:x-mailer:thread-index:content-language; bh=7d4i/Cbt0v0sY3zt5lN6y5CdvxjbRmTBG4AuBuMxtF4=; b=IJwwxuIEdg1E4zXuGjeDod+1w3RYBBCNzSsqpuX77ih36HSiq++s3ZCQXPeU9CIZVg K8JPJQu9xjivYYjrRaYwyeowLIu0GIdR2h4kKEkFM/GNC2RFF3VwVgj+gvi5eqVZIuWn osT5/VEm10IED6B54NPOtGMgFTci6a57zzVKE= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=from:to:cc:references:in-reply-to:subject:date:message-id :mime-version:content-type:x-mailer:thread-index:content-language :x-gm-message-state; bh=7d4i/Cbt0v0sY3zt5lN6y5CdvxjbRmTBG4AuBuMxtF4=; b=LjTecjok5K71Bymp6tZqAL2XCz03hWROV1mTK8Vf2AeEJwtel9ACu9kE5jW5iJqckb upYKPzoqYLBwAPOzMb9asWoTAZPzC7LMG65eDUc2/ZEvGqXrZs3ziUxwhF4t169yRVuy /6nm/aAt5uPMLPdobxGTJ8ahOIku1Z3gW+OcvZ6ERk1Av/bvuln09vcnyJIrHGh7eK8n cbGVxmK0aecgSPgIj2NALbHkyuxwj+LEBRV6uiz3THDjxAiNfsO5UFjV59sD+lVSBT3z ThOGE8WEXRnKHuP3FuKXyeUxKBZ2CxpWJpvDuS9EsFkln7zkISYEsRA0nUA6GSGi2Z/n 8YUg== Received: by 10.60.169.197 with SMTP id ag5mr12254920oec.137.1351036287413; Tue, 23 Oct 2012 16:51:27 -0700 (PDT) References: Date: Tue, 23 Oct 2012 19:51:16 -0400 Message-ID: <003a01cdb179$4bb2ca60$e3185f20$@com> MIME-Version: 1.0 Content-Type: multipart/related; boundary="----=_NextPart_000_003B_01CDB157.C4A12A60" X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: Ac2xVCHGxoC7DDOkQBK3JSXowHb0EQAEB7agAAA/YKAAAIGcQAAAngfQAABAAPAAAFe7gAAAadvw AALgvLA= Content-Language: en-us X-Gm-Message-State: ALoCoQniMq7Fnh+NlfoWjTJPvKWbkhEaftSaFo9ZVvtRpWufTmhlRDx1a9Jf+wmYcbRh896gygNr The company I am sending email to is a company that uses Google Apps for Teams. This is their apps admin login. Should I be worried about that message? My Settings On the Google apps side I have set my SPF record and set / verified my DKIM key. Here are my outlook settings: Why am I unable to send an attachment with Outlook via SMTP that I am able to send via Gmail / Google Apps?

  Read the article

• tmux -- any way to enable scrolling, but not selection?

  - by gatoatigrado

  I like that when mode-mouse is on in tmux, I can scroll through the buffer, but I don't like that I can't copy stuff to my OS clipboard by selecting it (as when tmux is disabled). Question: Is there any way to enable mouse scrolling, but not selection? I'm using KDE's konsole, if it matters. I've tried setting, set -g mouse-select-pane off set -g mouse-select-window off but no luck -- the only difference seems to be whether mode-mouse is on (tmux captures scrolling and selection) or off (tmux captures neither scrolling nor selection).

  Read the article

• How can I display host name on windows desktop

  - by Martin

  I do a lot of work on Windows Server 2008 remote desktops and often lose track of which host I am currently logged on to. Is there a way of displaying (without installing any non-standard apps) the host name or IP address of the host I am connected to in either the wallpaper or the notification area? I tried creating files in the desktop with the name of the machine - but my roaming profile shows the same set of desktop files on every machine, so that was scuppered. Duh! In shell windows this is easy: just set the prompt to display the host name. Surely there is a simple way of doing the same for the graphical desktop.

  Read the article

• Enable/disable wireless interface in a bat file

  - by Herms

  Is there a way to enable/disable a wireless network interface via the command line (so I can put it in a bat file)? When I'm in the office I use a wired connection, but Windows still occasionally bugs me about my wireless connection not being connected (even though I turned off the option for notifying me when there's no connectivity). I'm guessing the only way to stop it from bugging me is to disable the interface, but I'd rather not have to go into the network settings every time I need to do so. I'd like to set up a bat file or a shortcut that I can use to enable/disable the wireless (preferably a single one that toggles the current state), and then just set up a keyboard shortcut for that. I just have no idea how to do so from the command line.

  Read the article

• rsync windows to linux permission denied

  - by user64908

  Using Command rsync -avzP --delete --omit-dir-times ../../ [email protected]:/var/www/mysite/ I'm getting rsync: mkstemp "/var/www/mysite/.." failed: Permission denied (13) If ext is in the www-data group should I still set all the files to be owned by user www-data? I am trying to publish the files with rsync and then set the permissions using sudo chown -R www-data doc sudo chgrp -R www-data doc but I can't even rsync because of the permission denied. The SSH works fine, the rsync too except when it tries to write over or update some of the files in /var/www Client * Windows 7 * Cygwin 1.7.16 (GNU bash, version 4.1.10(4)-release (i686-pc-cygwin)) * rsync version 3.0.9 protocol version 30 Server * Ubuntu 12.04 * Apache2 * Root Accounts [ubuntu,ext] * Groups [www-data] * sudo vigr has www-data:x:33:ubuntu,ext I have already configure this http://stackoverflow.com/questions/2124169/cwrsync-ignores-nontsec-on-windows-7 This article has also managed to confuse me http://unix.stackexchange.com/questions/41687/how-should-i-rsync-files-in-var-www-if-i-want-them-to-be-owned-by-www-data What is the right procedure?

  Read the article

< Previous Page | 746 747 748 749 750 751 752 753 754 755 756 757  | Next Page >