Search Results

Search found 25787 results on 1032 pages for 'software updates'.

Page 754/1032 | < Previous Page | 750 751 752 753 754 755 756 757 758 759 760 761  | Next Page >

  • IRQ Conflicts Causing Video Card and Boot Problems?

    - by sanpatricio
    tl;dr - I have 4 devices sharing 1 IRQ. Is this bad and how do I tell the BIOS to stop it? Background: I have an old Dell GX280 dual Pentium 4 that I (semi) resurrected last weekend with an installation of Ubuntu 12.04. Everything was going fine the first several hours until a problem that plagued me when WinXP was on that machine happened -- it froze. Completely froze. None of the myriad of ways I have found here on askubuntu helped me to regain control except a long-press of the power button to shut it off. Clearly, this wasn't a software/WinXP issue. After much googling, I found that hardware conflicts can often cause this sort of total lock-up and with all the odd blocks of yellow and flecks of color showing on my screen (both WinXP and Ubuntu) I figured my old GeForce 7600 was failing and causing me these odd issues. (A good canned-air dusting of the entire interior fixed the color fleck problem) Again, through much googling and numerous answers found on askubuntu, I somehow stumbled my way onto the lshw command. After going through it, line by line, I found that I have four devices sharing IRQ 16: eth0, wlan0, ide0 (DVD-RW), and my video card. In hindsight, I can recall weird instances of my Ethernet connection to another computer not working when I thought it should. I never full troubleshot those issues so it could be a coincidence. The other thing that has been plaguing me since installing Ubuntu (wasn't there during WinXP) has been periodic moments of my monitor getting no signal from Ubuntu during boot. The first couple days, it would disappear after the Dell boot screen and reappear at Ubuntu login. Now, it disappears after the Dell boot screen and doesn't return at all -- I have to hit F12 where I can load a safe mode version of Ubuntu and get more details like dmesg and lsdev. I also ran memtest86 overnight and woke up to zero errors, so failing RAM is out. Where do I go from here?

    Read the article

  • How granular should a command be in a CQ[R]S model?

    - by Aaronaught
    I'm considering a project to migrate part of our WCF-based SOA over to a service bus model (probably nServiceBus) and using some basic pub-sub to achieve Command-Query Separation. I'm not new to SOA, or even to service bus models, but I confess that until recently my concept of "separation" was limited to run-of-the-mill database mirroring and replication. Still, I'm attracted to the idea because it seems to provide all the benefits of an eventually-consistent system while sidestepping many of the obvious drawbacks (most notably the lack of proper transactional support). I've read a lot on the subject from Udi Dahan who is basically the guru on ESB architectures (at least in the Microsoft world), but one thing he says really puzzles me: As we get larger entities with more fields on them, we also get more actors working with those same entities, and the higher the likelihood that something will touch some attribute of them at any given time, increasing the number of concurrency conflicts. [...] A core element of CQRS is rethinking the design of the user interface to enable us to capture our users’ intent such that making a customer preferred is a different unit of work for the user than indicating that the customer has moved or that they’ve gotten married. Using an Excel-like UI for data changes doesn’t capture intent, as we saw above. -- Udi Dahan, Clarified CQRS From the perspective described in the quotation, it's hard to argue with that logic. But it seems to go against the grain with respect to SOAs. An SOA (and really services in general) are supposed to deal with coarse-grained messages so as to minimize network chatter - among many other benefits. I realize that network chatter is less of an issue when you've got highly-distributed systems with good message queuing and none of the baggage of RPC, but it doesn't seem wise to dismiss the issue entirely. Udi almost seems to be saying that every attribute change (i.e. field update) ought to be its own command, which is hard to imagine in the context of one user potentially updating hundreds or thousands of combined entities and attributes as it often is with a traditional web service. One batch update in SQL Server may take a fraction of a second given a good highly-parameterized query, table-valued parameter or bulk insert to a staging table; processing all of these updates one at a time is slow, slow, slow, and OLTP database hardware is the most expensive of all to scale up/out. Is there some way to reconcile these competing concerns? Am I thinking about it the wrong way? Does this problem have a well-known solution in the CQS/ESB world? If not, then how does one decide what the "right level" of granularity in a Command should be? Is there some "standard" one can use as a starting point - sort of like 3NF in databases - and only deviate when careful profiling suggests a potentially significant performance benefit? Or is this possibly one of those things that, despite several strong opinions being expressed by various experts, is really just a matter of opinion?

    Read the article

  • Ad Agency storage/file server +backup needed (NAS or something else?)

    - by Rob
    Looking for a "this is all you need" recommendation. We're a small ad agency with both mac & pcs that access and share files from a 3 yr old Windows 2000 box (no server software). We currently have 1TB on the "server" and back it up to 2 different Seagate Free Agent Pro 1TB external drives. But we're low on space and are looking for something that's bigger, that we can still access from Mac & PC, EASY backup system, secure from viruses, firewall enabled. Not sure if a NAS will work or if we should have a real server. We don't really get on that box except to restore files, or run Norton on it. I hope I've provided enough for a general recommendation. Thanks. Rob Phx

    Read the article

  • What is the simplest way to confirm or to disprove that Virtual Box virtual machines support GRE protocol

    - by mbaitoff
    It is stated in VirtualBox manual (chapter 6) that VM network interfaces in "NAT" mode do not support GRE protocol. I'm currently trying to setup a pair of VMs as pptp server and client which would communicate via VM's network interfaces in "INTERNAL NETWORK" mode. I set up modern Linux OSes with pptp software on both machines and made some basic pptp configuration. However, I fail to connect the client to the server - server reports a failure when writing to GRE socket. I now need a quick proof of principal ability to use the GRE protocol between VirtualBox VMs over a network in "INTERNAL" mode, such as a several-line .c program that would try to open/send/receive/close a GRE protocol connection, or like a specific lightweight tool to diagnose the GRE availability. Any suggestions?

    Read the article

  • Is ZeroMQ a good choice to make a Python app and a C# managed assembly work together?

    - by Alex Bausk
    I have a task that involves talking to a .NET-based API (namely AutoCAD) to retrieve data, send commands, and react to events. I want to separate the API operations and the proper program logic (largely already implemented in Python) by using natural tools for both: a C# DLL for the former and a Python app for the latter. To connect these two pieces, I began exchanging JSON in ZeroMQ messages. I'm at early development stages but having recently discovered that ZeroMQ does not guarantee message delivery/order, I have reservations about whether this is a feasible way to go. Right now my app is a very basic REQ/REP pair and I plan to handle reacting to events and executing different commands by adding some sort of 'recipient-function' field to my message format. The reason that I want to use ZMQ is that I might be able to scale the software into a larger, multi-user, distributed solution sometime. I am a lay programmer so I would ask for your advice about this architecture. Should I just go ahead with it and plan to deal with message reliability/ordering when problems appear? Should I consider developing some kind of a REST wrapper around ZMQ?

    Read the article

  • Colored blocks on boot

    - by stackzerad
    When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

    Read the article

  • Distribute terrabyte files to the public from web server

    - by MarkJ
    Hi We need to set up a website which makes two or three large files publicly available - the files will be 1 or 2 terrabytes each. Although they will be public, in practise I expect only a relatively small number of scientists will want to download them. What is the best way to allow this? I've had a quick talk to a web-hosting provider (rackspace) and they suggested a hybrid solution. An entry-level managed server (we predict fairly low traffic for the website, but we do need to install some custom CGI software). Some cloud storage which hooks into Limelight Networks. This would host the large files, for download by FTP. It sounded OK to me but I know relatively little about server administration. Does it make sense? Thanks in advance, Mark

    Read the article

  • How to deal with a CEO making all technical decision but with little technical knowledge ?

    - by anonymous
    Hi, Question posted anonymously for obvious reasons. I am working in a company with a dev group of 5-6 developers, and I am in a situation which I have a hard time dealing with. Every technical choice (language, framework, database, database scheme, configuration scheme, etc...) is decided by the CEO, often without much rationale. It is very hard to modify those choices, and his main argument consists in "I don't like this", even though we propose several alternative with detailed pros/cons. He will also decide to rewrite from scratch our core product without giving a reason why, and he never participates to dev meetings because he considers it makes things slower... I am already looking at alternative job opportunities, but I was wondering if there anything we (the developers) could do to improve the situation. Two examples which shocked me: he will ask us to implement something akin to configuration management, but he reject any existing framework because they are not written in the language he likes (even though the implementation language is irrelevant). He also expects us to be able to write those systems in a couple of days, "because it is very simple". he keeps rewriting from scratch on his own our core product because the current codebase is too bad (codebase whose design was his). We are at our third rewrite in one year, each rewrite worse than the previous one. Things I have tried so far is doing elaborate benchmarks on our product (he keeps complaining that our software is too slow, and justifies rewrites to make it faster), implement solutions with existing products as working proof instead of just making pros/cons charts, etc... But still 90 % of those efforts go to the trashbox (never with any kind of rationale behind he does not like it, again), and often get reprimanded because I don't do exactly as he wants (not realizing that what he wants is impossible).

    Read the article

  • Completely clean previous Radeon drivers on Windows 7 64bit

    - by tomo
    Recently I replaced my old Radeon HD 2600XT to Radeon HD 6770 from MSI. I had strange problem that after installing the newest Radeon drivers they exist only until first reboot. After reboot my new card is recognized as an old 2600. I tried to unintall ATI/AMD software completetely from Programs/Features, then reboot, then untinstall driver from device manager, then reboot, then system showed that display driver is regular VGA (and oldschool 640x480 resolutions). Then to be double sure I executed DriverCleaner3 and Driver sweeper. After the restart I installed the newest drivers from amd site but after restarting the system recognizes card as 2600. I'm completely lost. Perhaps Win7 64bit caches somewhere drivers? Are there any issues regarding drivers-shadowing or 32/64 mirroring? Reinstalling the system is not an option.

    Read the article

  • Virtual OS using same Wallpaper as Host

    - by Jeff
    Greetings, I'm running a guest Linux OS on top of Windows XP, which rotates its wallpapers using the PowerToy Wallpaper Changer. I'm hoping for a way for my guest OS to somehow detect which wallpaper the host is using, and automatically switch to it. Why? Because if I run my guest OS in seamless mode and have transparent windows, I want the transparent background to match the host OS. It looks nice that way :). A couple tidbits of relevant information: Guest OS is Peppermint Ice (Ubuntu based) Host OS is Windows XP VirtualBox as virtualization software I realize this is somewhat breaking borders between the host and the guest, but I want my pretty rotating wallpaper! I'm guessing there is a way using scripts and shared folders or something similar, if not by means of just querying the host OS.

    Read the article

  • Error when installing ubuntu-zfs

    - by ubiquibacon
    I'm switching from FreeNAS to Ubuntu 12.04 LTS. After a vanilla install of Ubuntu has been completed I run the following commands in the order shown to install ZFS: apt-get install python-software-properties add-apt-repository ppa:zfs-native/stable apt-get -y -q update && apt-get -y -q upgrade apt-get install ubuntu-zfs When the last command is run ZFS is installed and seems to be working correctly... mostly (more on that later). However, when the last command is run I get this error (full log here): configure: error: *** Please make sure the kmod spl devel <kernel> package for your *** distribution is installed then try again. If that fails you *** can specify the location of the spl objects with the *** '--with-spl-obj=PATH' option. What is this error and how do I fix it? Now I said mostly earlier because my pool's don't auto mount when the server restarts the way they should. All my reading (mostly from this page) indicates that mountall should just take care of the mounting. I have followed the instructions on that page and I cannot get mountall to work correctly. My pools will only auto mount on restart if I edit /etc/fstab or change the ZFS_MOUNT and ZFS_UNMOUNT options in /etc/default/zfs.

    Read the article

  • Linux: disbale USB without disabling power

    - by Ergot
    TLDR I want toggle between the following usages of a usb-port via the terminal: use like a normal usb-port only supply energy to charge Story I recently got me something like a magna doodle that can save your drawings to pdf, which can be moved to your computer via usb afterwards. Now the thing is that you can't save anything while it's plugged in. Because it's the only way to charge it, it bugs me that I can't find a software solution and laziness I want to keep it plugged in and toggle the connection to the computer only when needed. I noticed that it's charging and usable when it is plugged in and the computer is shut down or suspened. So I guess that there's a way to do it. Tech info computer: ThinkPad X201 Linux Kernel: 3.14.5-1-ARCH "Magna doodle": Boogie Board Sync

    Read the article

  • Help me choose an Open-Source license

    - by Spartan-117A
    So I've done lots of open-source work. I have released many projects, most of which have fallen under GPL, LGPL, or BSD licensing. Now I have a new project (an implementation library), and I can't find a license that meets my needs (although I believe one may exist, hence this question). This is the list of things I'm looking for in the license. Appropriate credit given for ALL usage or derivative works. No warranty expressed or implied. The library may be freely used in ANY other open-source/free-software product (regardless of license, GPL, BSD, EPL, etc). The library may be used in closed-source/commercial products ONLY WITH WRITTEN PERMISSION. GPL - Useless to me, obviously, as it completely precludes any and all closed-source use, violating requirement (4). BSD/LGPL/MIT - Won't work, because they wouldn't require closed-source developers to get my permission, violating requirement (4). If it wasn't for that, BSD (FreeBSD in particular) would look like a good choice here. EPL/MPL - Won't work either, as the code couldn't be combined with GPL-code, therefore violating requirement (3). Also I'm pretty sure they allow commercial works without asking permission, so they don't meet (4) either. Dual-licensing is an option, but in that case, what combination would hold to all four requirements? Basically, I want BSD minus the commercial use, plus an option to use in commercial/closed-source as long as the developer has my written permission. EDIT: At the moment, thinking something like multiple-licensing under GPL/LGPL plus something else for commercial?

    Read the article

  • JavaOne LAD Call for Papers

    - by Tori Wieldt
    JavaOne LAD Call for Papers closes next Friday, October 4. Here are Java Evangelist Steven Chin's top three reasons why you submit a session:1) Imagine a parallel world where Java is king. Where the government has mandated that all software be open-source and recognized Java as an official platform. That is exactly what happened in Brazil and it shows in all aspects of their country from government systems to TV standards.2) A JUG in Every Village - Brazil has the most user groups of any country in the world by a significant margin. "I've stayed after JavaOne to visit several cities and gotten a great audience whether it was a large city like Brasilia or Goiania, or a coastal town like Fortaleza, Salvador, or Maceio," Chin explains.3) A Community-Supported Conference - SouJava and the entire Brazilian user group community is active and involved with JavaOne Brazil, making it a really engaging regional JavaOne conference. Submissions should be: From the community, all proposals should be non-Oracle. Java-related topics (not technologies such as Flex, .NET, Objective C, etc... unless it's specifically a topic about how such things INTEGRATE with Java) Non-product pitches Interesting/innovative uses of Java Practical relevant case studies/examples/practices/etc. The call for papers will close on Friday, October 4, 2012 at 11:59 pm local time. We look forward to hearing from you!

    Read the article

  • Ubuntu-Java Installation-Topcoder-“Java not found”

    - by hakuna121
    I realized that this might be the dumbest question here, but being a total beginner as I am, I really couldn't figure it out after trying all kinds of instructions I could found on the web. Specs: Ubuntu 13.04; What I intended to do: check out the Algorithm Competition section, by clicking the second-to-left tab,located on the top-left of the page: http://community.topcoder.com/tc What I got: a pop-up saying Java not found! Java could not be automatically detected on your machine. This page will attempt to automatically install Java and Java Web Start. If the download and installation does not occur automatically, click the link below to go to the Sun website where you can download the latest version of Java. What I did: I followed instructions on this Ubuntu Documentation page: https://help.ubuntu.com/community/Java and installed OpenJDK(Java Runtime Environment/Browser plugin/SDK) through Ubuntu Software Center. Then I rebooted the system, tried the page again. But I still got the java not found pop-up described above. Question: What's missing the get this working? Thank you!

    Read the article

  • Sample domain model for online store

    - by Carel
    We are a group of 4 software development students currently studying at the Cape Peninsula University of Technology. Currently, we are tasked with developing a web application that functions as a online store. We decided to do the back-end in Java while making use of Google Guice for persistence(which is mostly irrelevant for my question). The general idea so far to use PHP to create the website. We decided that we would like to try, after handing in the project, and register a business to actually implement the website. The problem we have been experiencing is with the domain model. These are mostly small issues, however they are starting to impact the schedule of our project. Since we are all young IT students, we have virtually no experience in the business world. As such, we spend quite a significant amount of time planning the domain model in the first place. Now, some of the issues we're picking up is say the reference between the Customer entity and the order entity. Currently, we don't have the customer id in the order entity and we have a list of order entities in the customer entity. Lately, I have wondered if the persistence mechanism will put the client id physically in the order table, even if it's not in the entity? So, I started wondering, if you load a customer object, it will search the entire order table for orders with the customer's id. Now, say you have 10 000 customers and 500 000 orders, won't this take an extremely long time? There are also some business processes that I'm not completely clear on. Finally, my question is: does anyone know of a sample domain model out there that is similar to what we're trying to achieve that will be safe to look at as a reference? I don't want to be accused of stealing anybody's intellectual property, especially since we might implement this as a business.

    Read the article

  • Trying to install Proprietory Nvidia Graphics Drivers

    - by Peter Snow
    After reading and trying many different suggestions for some hours, I returned to this how-to: https://help.ubuntu.com/community/BinaryDriverHowto/Nvidia The first problem I encounter is how to identify which of the listed drivers support my Nvidia GEForce 630M graphics card. Following the links doesn't really help, since it is not stated there either (except where support for a new driver was added later which is explicitly stated, but the original devices covered are not). However, even if I knew, if it doesn't appear in the 'Additional Drivers' dialogue (see below), how will I install it? Second Issue: The article goes on to say that available drivers for my hardware are usually listed in 'Additional Drivers'. In my case, they aren't. Unfortunately, it doesn't tell me how to correct that or work around it? I've checked the bios and there is no way offered there to disable the integrated graphics, only the Nvidia graphics. I've also tried each available option in this: $ sudo update-alternatives --config i386-linux-gnu_gl_conf My system is an Acer Aspire 4752G bought May 2012. I'm running Ubuntu 12.04LTS. uname -a : 3.2.0-38-generic-pae #61-Ubuntu SMP Tue Feb 19 12:39:51 UTC 2013 i686 i686 i386 GNU/Linux It's 64bit hardware but I installed 32bit OS for greater software compatibility. Running $ sudo tail -fn 500 /var/log/Xorg.0.log | grep '(EE)' returns" (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 28.886] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) The reason for wanting the proprietor y drivers is because my laptop comes with 3D accelerated graphics adaptor and so rather than confining myself to struggling with the on-board graphics, I would rather use it. I also want to experiment with using it for bitmining (which uses the GPU's for computing power).

    Read the article

  • Multicasting Windows 7 Image

    - by LawnChairSkank
    I am trying to deploy some new machines with windows 7 for the first time in our computer labs. We used to use third party imaging software and then run sysprep after the image was copied(XP), but it seems you can't go that route with windows 7. We set up a new imaging server with the windows system image manager, but when we try to multicast the image it pretty much takes down our whole staff and faculty network. I heard you can turn on a multicast feature on our cisco switches to help with the issue, but that it also slows the switches to a crawl. Another idea we have tried was pulling the the computer lab switch off the main network and plugging the imaging server directly into the computer lab switch so the multicast doesn't take down our network, but it doesn't seem to work without being able to hit a domain controller. Is there a way to multicast without taking out the network? I feel like I am missing something... Thanks in advance

    Read the article

  • Filtering serial port io

    - by mr odus
    I am currently working on a project where I communicate with hardware via a com port on its respective pc(win xp or 7) It is a fairly large project and sifting through the log file can be a bit of pain. This is my current setup. I use putty to do the actual serial communication, and write it to a log file. Then using MinGW Msys I filter it using tail -f "puttyLog" | grep -i "search term" Is there a better way to do this? I mean specifically filtering the input in realtime. Not that mine is terrible, but it still involves having to read from a log and sometimes there have been hangups where it will be delayed for a minute or 2. I have used software in the past with a main io window and then internal filter panels, but can no longer remember or find it.

    Read the article

  • Remember way back when we had a free decompiler?

    - by Justin Jones
    I, like probably so many of the rest of you, was mortified when Reflector was sold to RedGate. I knew where it was going. Suddenly you had to install it instead of just download and run it. I had a deep down feeling that one of the most useful tools in my arsenal was about to become a corporate product and no longer belong to the world of free tools. Sure enough it did. For a while now I’ve limped by without my favorite decompiler. This was made a little easier by the fact that you can now debug into the .net framework, but I still missed Reflector. JetBrains, makers of the superawesome and well worth the cost ReSharper (no it’s not free) have made their own decompiler that is comparable with Reflector, and it’s free. It’s still a corporate product, and JetBrains isn’t exactly known for making free software, but for now we have an option back on the table until some other industrious developer makes the next Reflector. dotPeek can be downloaded here.  http://www.jetbrains.com/decompiler/

    Read the article

  • How to trim/cut clips with VLC

    - by penyuan
    I am running VLC 1.1.5 64-bit on Mac OS X 10.6.6. On the web I found instructions saying I should click on Video-Advanced Controls in the menu bar to reveal options that let me trim and cut video clips. However, there is no such option in my copy of VLC. What I want to do is cut a ~2 minute portion from the middle of a two hour footage (in MXF format that QuickTime can't open) that I've got. Is there another way to trim and cut clips of videos in VLC? Or should I use other (preferably free, Free, and open source) software? Thanks.

    Read the article

  • Connect macbook to my LAN through a VPN - best solution?

    - by LewisMc
    So I have a LAN connected via a ADSL/PPPoA, this is using a bog-standard DLink router supplied by my ISP (talktalk UK). I have a NAS within the LAN that is running FreeNAS and I want to be able to connect to it when I'm out and about. It's running an atom so it's quite low on juice consumption but I don't want to have it on all day and night so I've been waking it via a magic packet and booting it down from the web admin when I need it. So I want to connect to the LAN, I presume via a VPN, to be able to send a magic packet. But what is the best method to accomplish this, or is there an easier way? I've been looking at the cisco 857 integrated router and the Netgear prosafe 318(behind modem) but not sure If I'm on the right track with what I want to achieve as I've not much experience or knowledge with VPN's or networking (software engineering student). I have tried port forwarding but to no avail, either with magic packets or even connecting outside the LAN via DYNDNS. Thanks,

    Read the article

  • Translating Documents from a Foreign Language into English on my Computer?

    - by Simon
    I am aware that websites can be translated from many languages into English thanks to Google Translate. If I receive documentation via email that is in a language other than English, how straight forward is it to translate into English on my PC or Apple Mac? (indeed is Google Translate involved or is it strictly for websites) Similarly if I receive documentation via the normal postal mail service (termed "snail mail" if I'm correct) which needs to be translated into English, what steps need to be taken for this documentation to be translated effectively & quickly on my PC or Apple Mac (I am aware of the term Optical Character Recognition (OCR) software, and is this costly, or do free alternatives exist to carry out the translation process solely online? ).

    Read the article

  • Trendnet tew-424ub wireless not working after update 12.10

    - by dwa
    I updated packages from the software manager and now my wireless won't work. It's a Trendnet tew-424ub iwconfig says lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network: description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 02 serial: 1c:6f:65:46:e9:d4 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.137 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:de00(size=256) memory:fdaff000-fdafffff memory:fdae0000-fdaeffff memory:fda00000-fda0ffff lsusb: Bus 003 Device 002: ID 0bc2:3332 Seagate RSS LLC Expansion Bus 003 Device 003: ID 05e3:0605 Genesys Logic, Inc. USB 2.0 Hub [ednet] Bus 003 Device 006: ID 0457:0163 Silicon Integrated Systems Corp. 802.11 Wireless LAN Adapter Bus 005 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 005: ID 0781:5530 SanDisk Corp. Cruzer Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Help? I'm not sure where to start. I've been browsing forums and such for a long time and nothing I try is working.

    Read the article

  • Oracle R Distribution 3.1.1 Released

    - by Sherry LaMonica-Oracle
    Oracle R Distribution version 3.1.1 has been released to Oracle's public yum today. R-3.1.1 (code name "Sock it to Me") is an update to R-3.1.0 that consists mainly of bug fixes. It also includes enhancements related to accessing package help files, improved accuracy when importing data with large integers, and better integration with RStudio graphics. The full list of new features and bug fixes is listed in the NEWS file.To install Oracle R Distribution using yum, follow the instructions in the Oracle R Enterprise Installation and Administration Guide.Installing using yum will resolve any operating system dependencies automatically. As such, we recommend using yum to install Oracle R Distribution. However, if yum is not available, you can install Oracle R Distribution RPMs directly using RPM commands.For Oracle Linux 5, the Oracle R Distribution RPMs are available in the Enterprise Linux Add-Ons repository:  R-3.1.1-1.el5.x86_64.rpm   R-core-3.1.1-1.el5.x86_64.rpm  R-devel-3.1.1-1.el5.x86_64.rpm  libRmath-3.1.1-1.el5.x86_64.rpm  libRmath-devel-3.1.1-1.el5.x86_64.rpm  libRmath-static-3.1.1-1.el5.x86_64.rpm For Oracle Linux 6, the Oracle R Distribution RPMs are available in the Oracle Linux Add-Ons repository:  R-3.1.1-1.el6.x86_64.rpm  R-core-3.1.1-1.el6.x86_64.rpm  R-devel-3.1.1-1.el6.x86_64.rpm  libRmath-3.1.1-1.el6.x86_64.rpm  libRmath-devel-3.1.1-1.el6.x86_64.rpm  libRmath-static-3.1.1-1.el6.x86_64.rpmFor example, this command installs the R 3.1.1 RPM on Oracle Linux x86-64 version 6:  rpm -i R-3.1.1-1.el6.x86_64.rpm To complete the Oracle R Distribution 3.1.1 installation, repeat this command for each of the 6 RPMs, resolving dependencies as required. Oracle R Distribution 3.1.1 is not yet officially certified with Oracle R Enterprise. Refer to Table 1-2 in the Oracle R Enterprise Installation Guide for supported configurations of Oracle R Enterprise components, or check this blog for updates. The Oracle R Distribution 3.1.1 binaries for Windows, AIX, Solaris SPARC and Solaris x86 will be available on OSS, Oracle's Open Source Software portal, in the coming weeks.

    Read the article

< Previous Page | 750 751 752 753 754 755 756 757 758 759 760 761  | Next Page >