change password - Page 759

E160 ubuntu 12.04 can't detect the modem

- by Matt

i've got problem with e160 on ubuntu 12.04. I'cant configure network manager and connect because NM can't see the e160. I;ve tried lot of solutions with no result. ateusz@mateusz-Aspire-5738:~$ sudo usb_modeswitch -v 0x12d1 -p 0x1003 -H [sudo] password for mateusz: aLooking for default devices ... found matching product ID adding device Found device in default mode, class or configuration (1) Accessing device 002 on bus 001 ... Getting the current device configuration ... OK, got current device configuration (1) Using first interface: 0x00 Using endpoints 0x01 (out) and 0x82 (in) Not a storage device, skipping SCSI inquiry USB description data (for identification) ------------------------- Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: not provided ------------------------- Sending Huawei control message ... OK, Huawei control message sent - Run lsusb to note any changes. Bye. Dmesg [ 521.480062] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 521.617792] option 1-4:1.1: GSM modem (1-port) converter detected [ 521.617945] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 521.618062] option 1-4:1.0: GSM modem (1-port) converter detected [ 521.618232] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 530.840276] option: option_instat_callback: error -108 [ 530.840455] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 530.840484] option 1-4:1.0: device disconnected [ 537.680378] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 537.680398] option 1-4:1.1: device disconnected [ 537.792088] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 537.929549] option 1-4:1.1: GSM modem (1-port) converter detected [ 537.929702] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 537.929818] option 1-4:1.0: GSM modem (1-port) converter detected [ 537.929993] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 547.224294] option: option_instat_callback: error -108 [ 547.224470] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 547.224511] option 1-4:1.0: device disconnected [ 556.988066] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 558.990663] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 558.990698] option 1-4:1.1: device disconnected [ 559.100068] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 559.241293] option 1-4:1.1: GSM modem (1-port) converter detected [ 559.241446] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 559.241565] option 1-4:1.0: GSM modem (1-port) converter detected [ 559.241739] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 568.728283] option: option_instat_callback: error -108 [ 568.728466] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 568.728496] option 1-4:1.0: device disconnected lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 005 Device 002: ID 09da:c20a A4 Tech Co., Ltd Bus 001 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270/E870 HSDPA/HSUPA Modem

Read the article

How to control CPU frequency

- by Tim

I am using CPU Frequency Scaling Monitor 2.30.0 on the panel to show and control CPU frequency. My CPU frequency by default will change according to load. But I want to make CPU work at the lowest level and so I choose 800 MHz in CPU Frequency Scaling Monitor. After a few seconds, however, it automatically changes back to Powersave or Performance mode which has automatic adjustment to CPU frequency. I was wondering how to actually make CPU work at the lowest level? Thanks!

Read the article

SQL SERVER – ?Finding Out What Changed in a Deleted Database – Notes from the Field #041

- by Pinal Dave

[Note from Pinal]: This is a 41th episode of Notes from the Field series. The real world is full of challenges. When we are reading theory or book, we sometimes do not realize how real world reacts works and that is why we have the series notes from the field, which is extremely popular with developers and DBA. Let us talk about interesting problem of how to figure out what has changed in the DELETED database. Well, you think I am just throwing the words but in reality this kind of problems are making our DBA’s life interesting and in this blog post we have amazing story from Brian Kelley about the same subject. In this episode of the Notes from the Field series database expert Brian Kelley explains a how to find out what has changed in deleted database. Read the experience of Brian in his own words. Sometimes, one of the hardest questions to answer is, “What changed?” A similar question is, “Did anything change other than what we expected to change?” The First Place to Check – Schema Changes History Report: Pinal has recently written on the Schema Changes History report and its requirement for the Default Trace to be enabled. This is always the first place I look when I am trying to answer these questions. There are a couple of obvious limitations with the Schema Changes History report. First, while it reports what changed, when it changed, and who changed it, other than the base DDL operation (CREATE, ALTER, DELETE), it does not present what the changes actually were. This is not something covered by the default trace. Second, the default trace has a fixed size. When it hits that size, the changes begin to overwrite. As a result, if you wait too long, especially on a busy database server, you may find your changes rolled off. But the Database Has Been Deleted! Pinal cited another issue, and that’s the inability to run the Schema Changes History report if the database has been dropped. Thankfully, all is not lost. One thing to remember is that the Schema Changes History report is ultimately driven by the Default Trace. As you may have guess, it’s a trace, like any other database trace. And the Default Trace does write to disk. The trace files are written to the defined LOG directory for that SQL Server instance and have a prefix of log_: Therefore, you can read the trace files like any other. Tip: Copy the files to a working directory. Otherwise, you may occasionally receive a file in use error. With the Default Trace files, if you ask the question early enough, you can see the information for a deleted database just the same as any other database. Testing with a Deleted Database: Here’s a short script that will create a database, create a schema, create an object, and then drop the database. Without the database, you can’t do a standard Schema Changes History report. CREATE DATABASE DeleteMe; GO USE DeleteMe; GO CREATE SCHEMA Test AUTHORIZATION dbo; GO CREATE TABLE Test.Foo (FooID INT); GO USE MASTER; GO DROP DATABASE DeleteMe; GO This sets up the perfect situation where we can’t retrieve the information using the Schema Changes History report but where it’s still available. Finding the Information: I’ve sorted the columns so I can see the Event Subclass, the Start Time, the Database Name, the Object Name, and the Object Type at the front, but otherwise, I’m just looking at the trace files using SQL Profiler. As you can see, the information is definitely there: Therefore, even in the case of a dropped/deleted database, you can still determine who did what and when. You can even determine who dropped the database (loginame is captured). The key is to get the default trace files in a timely manner in order to extract the information. If you want to get started with performance tuning and database security with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL

Read the article

Why is my WordPress installation unable to create a directory?

- by Ankur

I am a new user of Ubuntu 12.04 64 bit and I want to test WordPress on my local PC installation. I've only installed LAMP and the latest version of WordPress for now. Further actions were creating a directory www in /home, i.e /home/www install wordpress in it. changed Apache to use /home/www instead of /var/www Apache is running smoothly & wordpress seems to be so as well. However, if try to change my background of my wordpress blog it throws an error Unable to create directory wp-content/uploads/2012/12. Is its parent directory writable by the server? Plese help me to resolve my problem.

Read the article

SPRoleAssignment Crazy Caviats

- by MOSSLover

I’m not sure if this bug exists on any other environment, but here are a few issues I ran into when trying to use SPRoleAssignment and SPGroup: When trying to use Web.Groups[“GroupName”] it basically told me the group did not exist, so I had to change the code to use Web.SiteGroups[“GroupName”]. I could not add the Role Assignment to the Web and run a Web.Update() without adding an additional Web.AllowUnsafeUpdates= true; , however on my virtual machine I could do a Web.Update() without the extra piece of code. I kept receiving an error in my browser stating that I should hit the back button and update my permissions. So after fixing those two issues I was able to copy the permissions from a page item into a Site for my migration. Hopefully, one of you can learn from my error messages if you have any issues in the future. Technorati Tags: SPRoleAssignment,MOSS,SPGroup

Read the article

Why is there a "new" keyword in Go?

- by dystroy

I'm still puzzled as why we have new in Go. &Thing{} is as clear and concise as new(Thing) to Go coders and it uses only constructs you often use elsewhere. It's also more extensible as you might change it to &Thing{3} or &Thing{Feets:7}. In my opinion, having a supplementary keyword is costly, it makes the language more complex and adds to what you must know. And it might mask to newcomers what's behind instantiating a struct. It also makes one more reserved word. So what's the reasoning behind new ? Is it something useful ? Should we use it ?

Read the article

Closest location - Heapify or Build-heap

- by Trevor Adams

So lets say we have a set of gps data points and your current location. If asked to give the closest point to your current location we can utilize a heap with the distance being the key. Now if we update the current location, I suspect that only a few of the keys will change enough to violate the heap property. Would it be more efficient to rebuild the heap after recalculating the keys or to run heapify (assuming that only a few of the keys have changed enough). It is assumed that we don't jump around with the new location (new current location is close to the last current location).

Read the article

Configuration data: single-row table vs. name-value-pair table

- by Heinzi

Let's say you write an application that can be configured by the user. For storing this "configuration data" into a database, two patterns are commonly used. The single-row table CompanyName | StartFullScreen | RefreshSeconds | ... ---------------+-------------------+------------------+-------- ACME Inc. | true | 20 | ... The name-value-pair table ConfigOption | Value -----------------+------------- CompanyName | ACME Inc. StartFullScreen | true (or 1, or Y, ...) RefreshSeconds | 20 ... | ... I've seen both options in the wild, and both have obvious advantages and disadvantages, for example: The single-row tables limits the number of configuration options you can have (since the number of columns in a row is usually limited). Every additional configuration option requires a DB schema change. In a name-value-pair table everything is "stringly typed" (you have to encode/decode your Boolean/Date/etc. parameters). (many more) Is there some consensus within the development community about which option is preferable?

Read the article

Geometry shader for multiple primitives

- by Byte56

How can I create a geometry shader that can handle multiple primitives? For example when creating a geometry shader for triangles, I define a layout like so: layout(triangles) in; layout(triangle_strip, max_vertices=3) out; But if I use this shader then lines or points won't show up. So adding: layout(triangles) in; layout(triangle_strip, max_vertices=3) out; layout(lines) in; layout(line_strip, max_vertices=2) out; The shader will compile and run, but will only render lines (or whatever the last primitive defined is). So how do I define a single geometry shader that will handle multiple types of primitives? Or is that not possible and I need to create multiple shader programs and change shader programs before drawing each type?

Read the article

Sub routing in a SPA site

- by Anders

I have a SPA site that I'm working on, I have a requirement that you can have subroutes for a page view model. Im currently using this 'pattern' for the site MyApp.FooViewModel = MyApp.define({ meta: { query: MyApp.Core.Contracts.Queries.FooQuery, title: "Foo" }, init: function (queryResult) { }, prototype: { } }); In the master view model I have a route table this.navigation(new MyApp.RoutesViewModel({ Home: { model: MyApp.HomeViewModel, route: String.empty }, Foo: { model: MyApp.FooViewModel } })); The meta object defines which query should populate the top level view model when its invoked through sammyjs, this is all fine but it does not support sub routing My plan is to change the meta object so that it can (optional offcourse) look like this meta: { query: MyApp.Core.Contracts.Queries.FooQuery, title: "Foo", route: { barId: MyApp.BarViewModel } } When sammyjs detects a barId in the query string the Barmodel will be executed and populated through its own meta object. Is this a good design?

Read the article

12.04 - Connecting Acer X203H monitor to new Dell XPS 15z laptop

- by Lucy Dixon

I have installed the latest version of Ubuntu (12.04) on my boyfriend's new Dell XPS 15z laptop. He uses a Microsoft wireless keyboard and mouse, and an Acer X203H monitor with his set-up. No problems with the keyboard or mouse, or with connecting the HP printer, but we just can't get the laptop to talk to the Acer monitor. With his old setup he used a VGA cable to connect machine & monitor. New laptop has no VGA port, but we've bought a VGA to HDMI adaptor to connect to the laptop. Have tried using Fn F2 to change the display from laptop to monitor, but it doesn't see the monitor at all. HELP! Is there a driver I can install from somewhere? Or how can I tell Ubuntu to look for the monitor on another port? Completely in the dark, and about to get in trouble!! Thanks

Read the article

Setting effects variables in XNA

- by Badescu Alexandru

Hello ! I am currently reading a book named "3D Graphics with XNA Game Studio 4.0" by Sean James and have some questions to ask : If i create a effect parameter named lets say SpecularPower and have in my effect a variable named SpecularPower , if i do something like effect.Parameters["SpecularPower"].SetValue(3) That wil change the SpecularPower variable in my effect ? And a second question, not regarding the book : If i have a spaceship and i've created a "boost" functionality that speeds up my spaceship, what effects should i implement to create the impresion oh high speed ? I was thinking of making everything except my spaceship blurry but i think there would be something missing . Any ideas ? Regards, Alex Badescu

Read the article

Cannot Unbind Super Key from Unity

- by Tom Thorogood

Due to a graphics card compatibility issue using CrunchBang, I was told that my best option would be to move to 12.04 LTS. I'm trying to get everything configured and personalized the way I'm used to things, but am having some issues with unbinding default Unity shortcuts. I'm used to having all my shortcuts routed through the super key (T for Terminal, W for Web, Up for increased opacity, and so on). I've followed instructions to install compizconfig-settings-manager, and did an advanced search for all keyboard shortcuts binding to the super key, including the Unity shortcuts, but Unity still seems to listen for that keypress, and thus neither compiz nor the keybindings set up in system prefs - keyboard receive the commands I give them. (I did try also to simply change the unity launcher key instead of disabling it as shown below -- neither worked)

Read the article

Maintaining packages with code - Adding a property expression programmatically

Every now and then I've come across scenarios where I need to update a lot of packages all in the same way. The usual scenario revolves around a group of packages all having been built off the same package template, and something needs to updated to keep up with new requirements, a new logging standard for example.You'd probably start by updating your template package, but then you need to address all your existing packages. Often this can run into the hundreds of packages and clearly that's not a job anyone wants to do by hand. I normally solve the problem by writing a simple console application that looks for files and patches any package it finds, and it is an example of this I'd thought I'd tidy up a bit and publish here. This sample will look at the package and find any top level Execute SQL Tasks, and change the SQL Statement property to use an expression. It is very simplistic working on top level tasks only, so nothing inside a Sequence Container or Loop will be checked but obviously the code could be extended for this if required. The code that actually sets the expression is shown below, the rest is just wrapper code to find the package and to find the task. /// <summary> /// The CreationName of the Tasks to target, e.g. Execute SQL Task /// </summary> private const string TargetTaskCreationName = "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"; /// <summary> /// The name of the task property to target. /// </summary> private const string TargetPropertyName = "SqlStatementSource"; /// <summary> /// The property expression to set. /// </summary> private const string ExpressionToSet = "@[User::SQLQueryVariable]"; .... // Check if the task matches our target task type if (taskHost.CreationName == TargetTaskCreationName) { // Check for the target property if (taskHost.Properties.Contains(TargetPropertyName)) { // Get the property, check for an expression and set expression if not found DtsProperty property = taskHost.Properties[TargetPropertyName]; if (string.IsNullOrEmpty(property.GetExpression(taskHost))) { property.SetExpression(taskHost, ExpressionToSet); changeCount++; } } } This is a console application, so to specify which packages you want to target you have three options: Find all packages in the current folder, the default behaviour if no arguments are specified TaskExpressionPatcher.exe .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Find all packages in a specified folder, pass the folder as the argument TaskExpressionPatcher.exe C:\Projects\Alpha\Packages\ .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Find a specific package, pass the file path as the argument TaskExpressionPatcher.exe C:\Projects\Alpha\Packages\Package.dtsx The code was written against SQL Server 2005, but just change the reference to Microsoft.SQLServer.ManagedDTS to be the SQL Server 2008 version and it will work fine. If you get an error Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008… then check that the package is from the correct version of SSIS compared to the referenced assemblies, 2005 vs 2008 in other words. Download Sample Project TaskExpressionPatcher.zip (6 KB)

Read the article

Should page contents same all time for SEO?

- by Ahmet Kemal

Hi, I have a frequently updated website. That's why page contents change frequently. I mean the items that are on 1'st page become on 2'nd page a day after. Similarly 192'nd page which is my last page becomes 193'rd page a day after. So Google finds different content on a specific page than its previous visit. Is it bad for SEO? My main page is http://www.yemeklog.com/home/ and as you see below page pagination pages are like http://www.yemeklog.com/home/10 or http://www.yemeklog.com/home/192 . Website content is about food receipes at all pages. What you think about it?

Read the article

dynamic urls and links on one web page

- by John

I am trying to figure out how to create dynamic links and urls on a static webpage. What I want to do is the following: I have a single webpage for example: MYWEBPAGEdotCOM/INDEX.HTML that will always look the same, except for one link on the page. the link would be on the page for example: LINK TO AFFILIATE: affiliatedotCOM/my-affiliate_code_here_DYNAMIC_REFERER the only thing would change is the "DYNAMIC_REFERER" with every dynamic url on this page: MYWEBPAGEdotCOM/INDEX.PHP_id=test1 MYWEBPAGEdotCOM/INDEX.PHP_id=test2 MYWEBPAGEdotCOM/INDEX.PHP_id=test3 MYWEBPAGEdotCOM/INDEX.PHP_id=test4 which would only hange the dynamic link on the page to: affiliatedotCOM/my-affiliate_code_here_test1 affiliatedotCOM/my-affiliate_code_here_test2 affiliatedotCOM/my-affiliate_code_here_test3 affiliatedotCOM/my-affiliate_code_here_test4 Can someone tell me how I could go about doing this? I just dont want to have to make 100's of pages, as this would prevent me from having to do so.

Read the article

Intel HD graphic drivers for ubuntu 10.10 64bit: the brightness says its being adjusted but it isn't

- by James

Hey all, I picked up an hp dm3t laptop with intel HD graphics and installed ubuntu 10.10 64 bit on it. It works great -- the only problem is that the brightness controls on the keyboard don't work. The brightness is always at full. When I try to adjust it down, the indicator graphic indicates that it's going down but the actual brightness doesn't change. Is there anything that I can try to make this work? I'd really appreciate any help. I asked this on superuser.com and someone commented that I should play around with the intel hd drivers. I'm a total noob -- how do I do that? What else can I try? I reallly don't want to do back to windows.

Read the article

How to create a fountain in UDK

- by user36425

I'm trying to make a fountain in my level in UDK, I made the base of the fountain by using a Cylinder build and now I'm trying to put water in it. I went to use the fluidSurfaceActor but I notice that this is square but my fountain is a cylinder. Is there a way that I can change the shape of the fluidSurfaceActor to fit the builder brush shape or is there another way to do this? Or is it hopeless and I have to make my fountain into a cube? Here is a link/picture to the screenprint of what I'm talking about:

Read the article

Getting PHP to work with apache to run .php files through browser [closed]

- by Kevin Duke

I have VPS running Debian 5.0 (I think) and I would like to get it to run PHP files. I was told it needed to be configured with Apache. I tried entering the command apt-get install apache2 php5 libapache2-mod-php5. But there was no change. Console output: http://pastebin.com/sVMWq6mA This is everything in my /etc/apache2/mods-enabled: http://img35.imageshack.us/img35/6474/modsb.jpg My webserver can be accessed here: http://206.217.223.136/test/ In my test.php file I have the code : <?php phpinfo(); ?> but instead of displaying the page, it tries to download it. How can I fix this?

Read the article

Tor check failed though Vidalia shows green onion

- by Wolter Hellmund

I have installed tor successfully and Vidalia shows it is running without problems; however, when I check if I am using tor in this website I get an error message saying I am not using tor. I have tried two things to fix this: I installed ProxySwitchy on Google Chrome, and created a profile for Tor (with address 127.0.0.1, port 8118), but enabling the proxy doesn't change the results in the tor check website linked before. I changed my network proxy settings through System Settings Network from None to Manual, and selected as address always 127.0.0.1 and as port 8118 for all but for the socket, for which I entered 9050 instead. This makes internet stop working completely. How can I fix this problem?

Read the article

Why is trailing whitespace a big deal?

- by EpsilonVector

Trailing whitespace is enough of a problem for programmers that editors like Emacs have special functions that highlight it or get rid of it automatically, and many coding standards require you to eliminate all instances of it. I'm not entirely sure why though. I can think of one practical reason of avoiding unnecessary whitespace, and it is that if people are not careful about avoiding it, then they might change it in between commits, and then we get diffs polluted with seemingly unchanged lines, just because someone removed or added a space. This already sounds like a pretty good reason to avoid it, but I do want to see if there's more to it than that. So, why is trailing whitespace such a big deal?

Read the article

Developing an analytics's system processing large amounts of data - where to start

- by Ryan

Imagine you're writing some sort of Web Analytics system - you're recording raw page hits along with some extra things like tagging cookies etc and then producing stats such as Which pages got most traffic over a time period Which referers sent most traffic Goals completed (goal being a view of a particular page) And more advanced things like which referers sent the most number of vistors who later hit a goal. The naieve way of approaching this would be to throw it in a relational database and run queries over it - but that won't scale. You could pre-calculate everything (have a queue of incoming 'hits' and use to update report tables) - but what if you later change a goal - how could you efficiently re-calculate just the data that would be effected. Obviously this has been done before ;) so any tips on where to start, methods & examples, architecture, technologies etc.

Read the article

No space on device

- by user170810

Today I tried to move a huge directory to a common directory for 2 users. I first tried to change the permissions of my home directory. So something happened with my ~/.private directory and the disk was full! I have a 2 TB disk. I cannot make a backup, I cannot even enter graphics mode. Please help. Are there a way to restore my contents without making backup? Even creating ~/Private is impossible -- "no space on the device". I have no Private, and don't tell me that I have erased it, because it is not true. Are there some utilities to restore the files and make them not encrypted?

Read the article

How to efficiently preserve a really big navigation history in Firefox?

- by brandizzi

When I was using Mac, my Firefox stored items in its history for really long times. Sometimes I needed to find a link to a site I have seen two years ago and it found it! Also, the autocomplete in the Firefox bar is really great, so a long history and the autocompleting yield a wonderful feature to me. Unfortunately, it seems this does not happen in Ubuntu's Firefox. I looked for solutions but I just got some Firefox developers saying the option of expanding history is out for performance issues and one is well advised to not try to change it (which read to me as saying "we cannot make it work well so we limit the scope"). Anyway, my question is: is there a way of efficiently expand the size of Firefox history? Sorry for my bitterness, but a solution with strings attached (mostly say that I should not do it, like this addon) is not solution for me. Does someone have the same need of mine and found a solution?

Read the article

Cluster Node Recovery Using Second Node in Solaris Cluster

- by Onur Bingul

Assumptions:Node 0a is the cluster node that has crashed and could not boot anymore.Node 0b is the node in cluster and in production with services active.Both nodes have their boot disk mirrored via SDS/SVM.We have many options to clone the boot disk from node 0b:- make a copy via network using the ufsdump command and pipe to ufsrestore - make a copy inserting the disk locally on node 0b and creating the third mirror with SDS- make a copy inserting the disk locally on node 0b using dd commandIn this procedure we are going to use dd command (from my experience this is the best option).Bare in mind that in the examples provided we work on Sun Fire V240 systems which have SCSI internal disks. In the case of Fibre Channel (FC) internal disks you must pay attention to the unique identifier, or World Wide Name (WWN), associated with each FC disk (in this case take a look at infodoc #40133 in order to recreate the device tree correctly).Procedure:On node 0b the boot disk is c1t0d0 (c1t1d0 mirror) and this is the VTOC:* Partition Tag Flags Sector Count Sector Mount Directory 0 2 00 0 2106432 2106431 1 3 01 2106432 74630784 76737215 2 5 00 0 143349312 143349311 4 7 00 76737216 50340672 127077887 5 4 00 127077888 14683968 141761855 6 0 00 141761856 1058304 142820159 7 0 00 142820160 529152 143349311We will insert the new disk on node 0b and it will be seen as c1t2d0.1) On node 0b we make a copy via dd from disk c1t0d0s2 to disk c1t2d0s2# dd if=/dev/rdsk/c1t0d0s2 of=/dev/rdsk/c1t2d0s2 bs=8192kA copy of a 72GB disk will take approximately about 45 minutes.Note: as an alternative to make identical copy of root over network follow Document ID: 47498Title: Sun[TM] Cluster 3.0: How to Rebuild a node with Veritas Volume Manager2) Perform an fsck on disk c1t2d0 data slices: 1. fsck -o f /dev/rdsk/c1t2d0s0 (root) 2. fsck -o f /dev/rdsk/c1t2d0s4 (/var) 3. fsck -o f /dev/rdsk/c1t2d0s5 (/usr) 4. fsck -o f /dev/rdsk/c1t2d0s6 (/globaldevices)3) Mount the root file system in order to edit following files for changing the node name:# mount /dev/dsk/c1t2d0s0 /mntChange the hostname from 0b to 0a:# cd /mnt/etc# vi hosts # vi hostname.bge0 # vi hostname.bge2 # vi nodename 4) Change the /mnt/etc/vfstab from the actual:/dev/md/dsk/d201 - - swap - no -/dev/md/dsk/d200 /dev/md/rdsk/d200 / ufs 1 no -/dev/md/dsk/d205 /dev/md/rdsk/d205 /usr ufs 1 no logging/dev/md/dsk/d204 /dev/md/rdsk/d204 /var ufs 1 no logging#/dev/md/dsk/d206 /dev/md/rdsk/d206 /globaldevices ufs 2 yes loggingswap - /tmp tmpfs - yes -/dev/md/dsk/d206 /dev/md/rdsk/d206 /global/.devices/node@2 ufs 2 noglobalto this (unencapsulate disk from SDS/SVM):/dev/dsk/c1t0d0s1 - - swap - no -/dev/dsk/c1t0d0s0 /dev/rdsk/c1t0d0s0 / ufs 1 no -/dev/dsk/c1t0d0s5 /dev/rdsk/c1t0d0s5 /usr ufs 1 no logging/dev/dsk/c1t0d0s4 /dev/rdsk/c1t0d0s4 /var ufs 1 no logging#/dev/md/dsk/d206 /dev/md/rdsk/d206 /globaldevices ufs 2 yes loggingswap - /tmp tmpfs - yes -/dev/dsk/c1t0d0s6 /dev/rdsk/c1t0d0s6 /global/.devices/node@1 ufs 2 no globalIt is important that global device partition (slice 6) in the new vfstab will point to the physical partition of the disk (in our case slice 6).Be careful with the name you use for the new disk. In this case we define it as c1t0d0 because we will insert it as target 0 in node 0a.But this could be different based on the configuration you are working on.5) Remove following entry from /mnt/etc/system (part of unencapsulation procedure):rootdev:/pseudo/md@0:0,200,blk6) Correct the link shared -> ../../global/.devices/node@2/dev/md/shared in order to point to the nodeid of node 0a (in our case nodeid 1):# cd /mnt/dev/mdhow it is now.... node 0b has nodeid 2lrwxrwxrwx 1 root root 42 Mar 10 2005 shared ->../../global/.devices/node@2/dev/md/shared# rm shared# ln -s ../../global/.devices/node@1/dev/md/shared sharedhow is going to be... with nodeid 1 for node 0alrwxrwxrwx 1 root root 42 Mar 10 2005 shared ->../../global/.devices/node@1/dev/md/shared7) Change nodeid (in our case from 2 to 1):# cd /mnt/etc/cluster# vi nodeid8) Change the file /mnt/etc/path_to_inst in order to reflect the correct nodeid for node 0a:# cd /mnt/etc# vi path_to_instChange entries from node@2 to node@1 with the vi command ":%s/node@2/node@1/g"9) Write the bootblock to the disk... just in case:# /usr/sbin/installboot /usr/platform/sun4u/lib/fs/ufs/bootblk /dev/rdsk/c1t2d0s0Now the disk is ready to be inserted in node 0a in order to bootup the node.10) Bootup node 0a with command "boot -sx"... this is becasue we need to make some changes in ccr files in order to recreate did environment.11) Modify cluster ccr:# cd /etc/cluster/ccr# rm did_instances# rm did_instances.bak# vi directory - remove the did_instances line.# /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/directory # grep ccr_gennum /etc/cluster/ccr/directory ccr_gennum -1 # /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/infrastructure # grep ccr_gennum /etc/cluster/ccr/infrastructure ccr_gennum -112) Bring the node 0a down again to the ok prompt and then issue the command "boot -r"Now the node will join the cluster and from scstat and metaset command you can verify functionality. Next step is to encapsulate the boot disk in SDS/SVM and create the mirrors.In our case node 0b has metadevice name starting from d200. For this reason on node 0a we need to create metadevice starting from d100. This is just an example, you can have different names.The important thing to remember is that metadevice boot disks have different names on each node.13) Remove metadevice pointing to the boot and mirror disks (inherit from node 0b):# metaclear -r -f d200# metaclear -r -f d201# metaclear -r -f d204# metaclear -r -f d205# metaclear -r -f d206verify from metastat that no metadevices are set for boot and mirror disks.14) Encapsulate the boot disk:# metainit -f d110 1 1 c1t0d0s0# metainit d100 -m d110# metaroot d10015) Reboot node 0a.16) Create all the metadevice for slices remaining on boot disk# metainit -f d111 1 1 c1t0d0s1# metainit d101 -m d111# metainit -f d114 1 1 c1t0d0s4# metainit d104 -m d114# metainit -f d115 1 1 c1t0d0s5# metainit d105 -m d115# metainit -f d116 1 1 c1t0d0s6# metainit d106 -m d11617) Edit the vfstab in order to specifiy metadevices created:old:/dev/dsk/c1t0d0s1 - - swap - no -/dev/md/dsk/d100 /dev/md/rdsk/d100 / ufs 1 no -/dev/dsk/c1t0d0s5 /dev/rdsk/c1t0d0s5 /usr ufs 1 no logging/dev/dsk/c1t0d0s4 /dev/rdsk/c1t0d0s4 /var ufs 1 no logging#/dev/md/dsk/d206 /dev/md/rdsk/d206 /globaldevices ufs 2 yes loggingswap - /tmp tmpfs - yes -/dev/dsk/c1t0d0s6 /dev/rdsk/c1t0d0s6 /global/.devices/node@1 ufs 2 no globalnew:/dev/md/dsk/d101 - - swap - no -/dev/md/dsk/d100 /dev/md/rdsk/d100 / ufs 1 no -/dev/md/dsk/d105 /dev/md/rdsk/d105 /usr ufs 1 no logging/dev/md/dsk/d104 /dev/md/rdsk/d104 /var ufs 1 no logging#/dev/md/dsk/106 /dev/md/rdsk/d106 /globaldevices ufs 2 yes loggingswap - /tmp tmpfs - yes -/dev/md/dsk/d106 /dev/md/rdsk/d106 /global/.devices/node@1 ufs 2 noglobal18) Reboot node 0a in order to check new SDS/SVM boot configuration.19) Label the mirror disk c1t1d0 with the VTOC of boot disk c1t0d0:# prtvtoc /dev/dsk/c1t0d0s2 > /var/tmp/VTOC_c1t0d0 # fmthard -s /var/tmp/VTOC_c1t0d0 /dev/rdsk/c1t1d0s220) Put DB replica on slice 7 of disk c1t1d0:# metadb -a -c 3 /dev/dsk/c1t1d0s721) Create metadevice for mirror disk c1t1d0 and attach the new mirror side:# metainit d120 1 1 c1t1d0s0# metattach d100 d120# metainit d121 1 1 c1t1d0s1# metattach d101 d121# metainit d124 1 1 c1t1d0s4# metattach d104 d124# metainit d125 1 1 c1t1d0s5# metattach d105 d125# metainit d126 1 1 c1t1d0s6# metattach d106 d126

Search Results

Search found 40429 results on 1618 pages for 'change password'.

Page 759/1618 | < Previous Page | 755 756 757 758 759 760 761 762 763 764 765 766 | Next Page >

- by Matt

- by Tim

- by Pinal Dave

- by Ankur

- by MOSSLover

- by dystroy

- by Trevor Adams

- by Heinzi

- by Byte56

- by Anders

- by Lucy Dixon

- by Badescu Alexandru

- by Tom Thorogood

- by Ahmet Kemal

- by John

- by James

- by user36425

- by Kevin Duke

- by Wolter Hellmund

- by EpsilonVector

- by Ryan

- by user170810

- by brandizzi

- by Onur Bingul

< Previous Page | 755 756 757 758 759 760 761 762 763 764 765 766 | Next Page >