Search Results

Search found 2630 results on 106 pages for 'abood mount'.

Page 76/106 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

• BIOS password and hardware clock problems

  - by Slartibartfast

  I have HP 6730b lap top. I've bought it used and installed (Gentoo) linux on it. BIOS is protected with password, and guy I bought it from said "I've tweaked BIOS from Windows program, it never asked me for password". I've tried to erase password by removing battery, but it's still there. What did get erased obviously is hw clock. This is what hapends: a) I can leave lap top in January 1980 and it works b) I can correct system time, but boot wil fail with "superblock mount time in future" from where I need to manually do fsck and continue boot c) I can correct system time and sync it with hwclock -w but than it will behave as b) and it will reset BIOS time to 1.1.1980 00:00 So I need either a way to bypass a BIOS password (wich after lot of googling seems impossible),a way to persist a clock, or a setup that will enable hw clock in eighties, system clock in present time and normal boot.

  Read the article

• How to copy files between windows 7 professional and enterprise machines?

  - by WilliamKF

  I've got a desktop system running Windows 7 Professional and a laptop running windows 7 Enterprise in a domain-joined computer and I need to copy around 50 GB of files from the Enterprise machine to the professional one. I'd rather not burn a bunch of DVDs or use my tiny flash drive of 1 GB to do the transfer. How can I mount a drive from one of the computers to the other so that I can just drag and drop? I tried using a homegroup, but the windows 7 Enterprise laptop does not see it from the professional desktop and the laptop cannot make its own homegroup since it belongs to a domain.

  Read the article

• How would I put together a site requiring several TB? [closed]

  - by acidzombie24

  Lets say I have a site with unmetered 100MBPS bandwidth (i assume its bits?) and the ram i require. Most plans i see offer HDD that hold 250gb and 1TB. But what happens if i compile/generate enough data that i require 10tb or 25tb? (I'd likely have two servers but...) I wouldn't be serving all of that data (well not to the public) so CDN wouldn't make sense. What do i do in this scenario? Do I need to get a custom plan from a hosting provider? (if so how do i find them?) Are there services that allow me to mount remote drives (that sounds wrong unless its a CDN so maybe not). Are there host that deals specifically with unmetered bandwidth and provides lots of disk space? Math says ~1TB is the most i'll ever need but if i happen to need more i'd like to know my options.

  Read the article

• Can I force NFS automounts to use NFSv3?

  - by Steve

  I have a linux server that is exporting NFSv4 as well as NFSv3. I have a Fedora14 client that is defaulting to NFSv4 when automounting NFS shares off of the linux server, and it seems to be causing some problems. All my other linux clients on the network are mounting via NFSv3 without issue, so is there a way I can tell automount to mount the share via v3? I am pulling my automount maps via LDAP, with an entry in my /etc/auto.master file like so: +auto_master, so I assume it's a bit different than listing options with a regular automount map? (.i.e. /home --nfsvers=3 fileserver:/DATA)

  Read the article

• why my server has a dir named "?"

  - by liuxingruo

  These are all the dirs in my server: ? bin boot dev etc home lib lost+found media media2 misc mnt net opt proc root sbin selinux srv sys tmp usr var why there is a "?" dir? Thanks very much. BTW: the touch command was found on my server(wiered). I list the bin dir: alsacard cp dd env hostname loadkeys more ps sed tcptraceroute alsaunmute cpio df ex igawk loadkeys.static mount pwd setfont traceroute6 arch csh dmesg false ipcalc logger mountpoint raw setserial tracert awk cut dnsdomainname fgrep kbd_mode login mv red sh view basename date doexec gawk keyctl ls netstat redhat_lsb_init sleep ypdomainname bash dbus-cleanup-sockets domainname gettext kill mail nice rm sort cat dbus-daemon dumpkeys grep ksh mailx nisdomainname rmdir stty chgrp dbus-monitor echo gtar ksh93 mkdir pgawk rpm su chmod dbus-send ed gunzip link mknod ping rvi sync chown dbus-uuidgen egrep gzip ln mktemp ping6 rview tar touch is missing, how can i get it back?

  Read the article

• How to add a web folder via command line (Windows)

  - by Ryan

  I am trying to add a web folder via command line in windows. At first I though I should use the "net use" command, but when I tried I kept getting System error 67: C:net use * http://dev.subdomain.domain.tdl/dav/ the user name for 'dev.subdomain.domain.tdl': correctusername the password for dev.subdomain.domain.tdl: System error 67 has occurred. The network name cannot be found. The url I used works in a browser. It's an Apache dav on basic auth LDAP authentication method being used. Here's the thing... I CAN create a web folder when I use the "Add a network place" wizard. When I do net use, I don't see it listed in the prompt that follows. What utility do I need to use to mount a web folder in command line?

  Read the article

• Web application and remote storage of files

  - by Matt

  Hi have a web application that can store lots and lots of files on the server. i.e. users upload data to it. The files are stored below a particular storage path. The web host will be an IBM xseries 345. However, the disks are really expensive so we would like to put the files onto a less expensive server. Now here is the question. Should I use an NFS mount on the IBM server of a path on the storage server? Or should I write some scripts to upload the files to the storage server instead. Both the storage server and the web host are on the same network. Only the web server is visible to the world. Is NFS performance suitable for an expected low to moderately loaded server?

  Read the article

• Windows 2008 as home file server and more

  - by Christian W

  I currently have a freenas-unit as a NAS, and a Win2k8R2-unit as server. However I would like to consolidate these to units in one. What I really like about the freenas-unit is the ZFS filesystem. And the only reason I care about the ZFS filesystem is the easy way I can grow an existing filesystem just by inserting a new drive. How would this work in Win2k8? If I setup my unit with a separate drive as C: and a 1TB drive as D:. The D: would then be segmented into d:\Videos d:\Music d:\Pictures. When everything gets close to filling the storage-drive, I would like to expand the storage, but I wouldn't want to have E:\Videos or d:\Videos2 (using the NTFS folder mount thingy). I still want all my Videos to reside in D:\Videos and I want the OS to decide which drive it's going to be stored on... Some kind of on-the-fly jbod expansion :) Is this at all possible in Windows 2008?

  Read the article

• reiserfsck --rebuild-tree failed: Not enough allocable blocks

  - by mojo

  I have a reiserfs volume that required a --rebuild-tree, but is currently failing to complete when I pass it --rebuild-tree. Here is the output that I receive when running it: reiserfsck 3.6.19 (2003 www.namesys.com) # reiserfsck --rebuild-tree started at Mon Oct 26 13:22:16 2009 # Pass 0: # Pass 0 The whole partition (7864320 blocks) is to be scanned Skipping 8450 blocks (super block, journal, bitmaps) 7855870 blocks will be read 0%....20%....40%....60%....80%....100% left 0, 9408 /sec 287884 directory entries were hashed with "r5" hash. "r5" hash is selected Flushing..finished Read blocks (but not data blocks) 7855870 Leaves among those 6105606 Objectids found 287892 Pass 1 (will try to insert 6105606 leaves): # Pass 1 Looking for allocable blocks .. finished 0%....20%....40%....60%....80%....Not enough allocable blocks, checking bitmap...there are 1 allocable blocks, btw out of disk space Aborted I can't mount it, and I can't fsck it. I've tried extending the volume, but that hasn't helped either.

  Read the article

• Combine drivers from multiple Win7 installs to single image

  - by MikeyB

  I need to prepare a Windows 7 image with drivers for multiple systems (Lenovo laptops). I currently have an image prepared on one laptop type but need to grab the drivers appropriate for the other laptop types as well to ensure that it works on all systems. From what I can tell, the procedure will be: create a boot CD with imageX take a .wim image prepared on the first type of systems take .wim images from the other systems mount the other images in WAIK extract the drivers from the other images inject the drivers into the first .wim boot a system with the boot CD and redeploy the updated .wim image into the Windows partition take an image of the drive with usual imaging tools This all seems a little too convoluted, but I'm willing to do it to get the proper drivers into the image. This is (seemingly) necessarily complicated by having more than one OS on the disk image. Am I on the right track?

  Read the article

• Installing Software from a CD onto a Netbook

  - by Jonathan Sampson

  I apologize if this question has come up before - I can't seem to find it. Tonight my wife and I purchased a small samsung netbook and have been enjoying it for a light-weight solution around the house. My wife has a game she loves to play that was installed on her last laptop, but we'd like to put it on the netbook. The problem is, there's no cd-drive on the netbook and the game must be installed from a CD. What other ways can I install software from a CD onto the netbook lacking a local cd-drive on the device itself? I would prefer to not have to create image files, and mount virtual drives, etc.

  Read the article

• Centos expanding directory

  - by Ansell Cruz

  I currently have a file server, all the files are installed in /usr/local/nginx/html/. The setup is 1 hard disk with 1TB of data. This 1TB of storage is all used up. I asked the guys to add 2 HDDs with 2TB each. This new HDDs will be used for new storage of files. Now, if I mount this 2 new HDDs into /usr/local/nginx/html/, the current files in there will be deleted. My goal is to expand the storage in /usr/local/nginx/html/ without losing data in it. Would this be possible?

  Read the article

• Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendation?

  - by prs563

  We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

  Read the article

• How to stop scheduled chkdisk on windows 7?

  - by AndrejaKo

  Hi! I have a problem with windows 7 64-bit. I was trying out chkdsk command line options and scheduled a chddsk /r on next start. After that I disassembled the laptop on which I set the chkdsk. After I reassembled it, windows gets normally to the point where it should start the check and then hangs when the countdown reaches 1 second. During the countdown, it doesn't detect any input from keyboard. At first I thought that I didn't correctly install the keyboard, but under GNU/Linux, everything is working fine and I can normally mount the windows partition . So is there any way to stop the scheduled chkdsk? I really don't feel like reinstalling windows again because I just finished setting up my tool-chain the way I like it and compiled about 6GiB worth of dependencies I need for some project I'm working on.

  Read the article

• Lightweight Live Linux Image

  - by MA1

  I am working on an application which is being developed in wxPython and C plus using linux core utilities and network support. To be more specific, I only need the following support for following packages/softwares/components. wxPython C Network Support Linux Utilities Vi File System(fdisk/parted, ntfsprogs etc) Basic(cp, mount/umount, mkdir etc) The application will run from a live CD. Currently i am using Fedora 12 with Gnome for live CD. Currently the size of live image is around 350 MB. The size of application is hardly 1 MB. I don't need anything else except above mentioned. Just my application and supporting packages, no desktop etc. So, I need a Lightweight Linux image as smaller as possible providing all the above mentioned packages/components. I am considering the following distributions: Xfce LXDE Fluxbox Enlightenment Any ideas/suggestions?

  Read the article

• Disable or sleep secondary hard drive in Macbook

  - by cpak

  I've done some quick Googling but didn't find an answer. I've put an SSD in my Macbook, and at the same time moved the original hard drive to the optical drive bay. I'm running the OS and most of my daily apps off the SDD so the hard drive is really just for storing stuff I need now and then. Now I'd like to disable (as in power off or "force sleep") the hard drive when I don't need it. Tried unmounting the disk using diskutil unmountDisk but it kept spinning for like 10 minutes. Maybe that's to be expected, but I'd imagined it would stop instantly on unmount. Also, it would be nice to have it disabled by default, and only mount it (= power on) when I need it.

  Read the article

• Nobody nogroup on ubuntu client with Solaris server

  - by user1574623

  I have an openIdiana server with ZFS and it has been shared with NFS on a ubuntu server (called server1) one year ago. Now i am asked to shared it on a second ubuntu server (called server2). So i have took the line in /etc/fstab from server 1 and add it in server2: 192.168.1.22:mypool/data/.zfs/snapshot /mnt/zfs nfs acl,intr,noatime 0 0 But when i mount it, the rights on server2 are "nobody nogroup" (connect as anonymous?!) whereas its ok on server1. And on my OpenIndiana, I haven't found where it is configured (its not me who configured it last year). So I have tried to set zfs set sharenfs=rw numpool/data but without success. So i am looking for a file like /etc/exports on Ubuntu to configure which server is allowed to connect, and not as anonymous. Any idea? thanks,

  Read the article

• Fabric and cygwin don't work with windows UNC paths

  - by tcoopman

  I have some strange problems with fabric deployment to Windows Server 2008r2. The thing I try to accomplish is to copy some files to a shared folder with a fabric script (this script does a lot of other things too, but only this step gives me problems). This is the problem: When I try to access a UNC(Universal Naming convention) path I always get access denied kind of answers if I run the script in fabric. When I run the command in an ssh prompt (same user) it works fine. Examples: cmd: robocopy f:/.... //share result: in ssh this works fine, in fabric I get "Logon failure: the user has not been granted the requested logon type aat this computer." cmd: cd //share result: in ssh this works fine, in fabric I get "//share: Not a directory" Further information: uname -a and whoami return exact the same thing in fabric and ssh. I also tried things like mount, net use, but these commands all have kind of the same problem.

  Read the article

• tradeoffs of iSCSI vs. AFP when using Time Machine with a NAS?

  - by Ajit George

  I'm setting up a home NAS device (Synology DS409) that I'm planning to use for Time Machine backups (amongst other things). What are the tradeoffs between using iSCSI or AFP to mount the backup volume? The Synology wiki suggests that iSCSI is better if the Mac will be frequently disconnected from the network or sleeping, from the point of view of the volume automatically remounting. What about filesystem consistency? Given that unplugging a USB drive without properly unmounting it often requires the Time Machine volume to be repaired, would iSCSI have the same issues?

  Read the article

• Cannot copy files from external USB HDD to computer

  - by Thomas Versteeg

  Hello I have a HDD disk connected with a USB converter to my computer. It consists of two partitions, the first one is mounted automatically and I can grab all the files from it, but the second one I have to mount manually as a root in the command line, if I try to open it with nautilus it gives an error. The drive where the problem is is drive sdb1, sdb2 has the same settings but works fine. I am using Debian Wheezy. This is the fstab: /dev/sdb1 /media/usb0 auto defaults,gid=disk,umask=0777 0 0 /dev/sdb2 /media/usb1 auto defaults,gid=disk,umask=0777 0 0 And when I try to copy the files with this command (as root) cp -vr /media/usb0/* /home/user/Videos/ I get these types of errors: cp: reading `/media/usb0/.lang/file.ext': Permission denied cp: failed to extend `/home/user/Videos/.lang/file.ext': Permission denied How can I at least copy the files to my main HDD? I don't need to adjust them I only need to copy them!

  Read the article

• How to monitor the network traffic on a router?

  - by Adi

  Here's my current network set-up: we have 3 users connecting to a Thomson Gateway router (TG585 v8) provided by my ISP. We are connecting over an ADSL line. The problem is that we have a limited data allowance (60GB) and we always exceed it. I would like to monitor how much traffic each computer makes. The best solution would be to install a software on the router (like OpenWRT) which would monitor how much traffic each computer makes. But I couldn't find any replacement firmware that would support my router. The other solution would be to install a software on each machine and then collect all the data at the end of the mount. But that's not a very good think to do. Plus, the users can always shut down the application. Any suggestions?

  Read the article

• Shared block device file system (cluster file system without networking)

  - by fungs

  Is there any file system that can be mounted multiple times and supports concurrent file access for Linux? Basically I want something like a cluster file system but without the need to have a running network for a distributed lock manager. That can be very handy in connection with virtual machines that can share data with the host or another VM without the need to create a network link. This I want to avoid to keep the network architecture secure (virtual machine in DMZ) but share large files. No need to scale it up, just two machines that mount the same block device. Shouldn't it be possible to have file locking information right on the disk?

  Read the article

• Upgrade to ubuntu 13.04 from 12.04 with iso image

  - by Digvijay Yadav

  I have ubuntu 12.04 installed on my system. I want to upgrade it to ubuntu 13.04. I want to do this upgrade using an iso image of ubuntu 13.04. I tried this Solution But it didn't work for me. After running these command I didn't get any alerts about updating. Also I don't understand the gksu part of the solution. Here are the steps I tried: sudo mount -t iso9660 -o loop PATH/TO/ISO /cdrom then sudo /cdrom/cdromupgrade Read more: http://linuxpoison.blogspot.tw/2011/06/how-to-upgrade-ubuntu-using-alternate.html#ixzz2SFMqlOPx I also wanted to know, If I can do this using a networked computer. By this I mean the iso file is on some other computer. Thank you.

  Read the article

• LUNS access issue in ESX4 Cluster server

  - by rmustafa

  HI, I've created volumes in equallogic in PS 6000 XV(having 2 member which is in 1 pool), checked & those volumes can be easily detected my ISCSI software in windows. But the problem with ESX , not able to see the assigned disk on ESX server, I can explain what I've done: 1.Created Cluster with enabled HA & DRS 2.Added 3 ESX4 HOST 3.Added VMkernel & configured in all 3 ESX4, enabled vmotion & FT on the same adapter. 4.went to iSCSI storage adapter properties, enabled iSCSI 5.Trying to discover the available storage with the controller IP on dynamic discovery, but not able to see the assigned storage Note: the same volume is accessed to windows that means there is no issue from storage , am I right ???? Note: I wanted to mount the same volume in all 3 ESX host. Please suggest .... Thanks & Regards, Rashid Mustafa

  Read the article

• Installing Linux kernel 2.6.25.14 on RHEL 5.4

  - by aaron

  I have to install Linux kernel version 2.5.25.14 on a RHEL 5.4 server because of drive compatibility issues. I follow the RedHat "Building a Custom Kernel" instructions running the following: $ make mrproper $ make xconfig $ make clean $ make bzImage $ make modules $ make modules_install $ make install But I get a bunch of warnings like this: WARNING: No module ehci-hcd found for kernel 2.6.25.24, continuing anyway When I try to boot this kernel it is unable to mount the hard drive, and kernel panics on startup. As far as I can tell I'm using a standard configuration (I just accept the defaults and save a .config file). Is there something I'm missing? Thanks.

  Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >