Search Results

Search found 58436 results on 2338 pages for 'data'.

Page 760/2338 | < Previous Page | 756 757 758 759 760 761 762 763 764 765 766 767  | Next Page >

• Significance in R

  - by Gemsie

  Ok, this is quite hard to explain, but I'm at a complete loss what to do. I'm a relative newcomer to R and although I can completely admire how powerful it is, I'm not too good at actually using it.... Basically, I have some very contrived data that I need to analyse (it wasn't me who chose this, I can assure you!). I have the right and left hand lengths of lots of people, as well as some numeric data that shows their sociability. Now I would like to know if people who have significantly different lengths of hand are more or less sociable than those who have the same (leading into the research that 'symmetrical' people are more sociable and intelligent, etc. I have got as far as loading the data into R, then I have no idea where to go from there. How on Earth do I start to separate those who are close to symmetrical to those who aren't to then start to do the analysis? Ok, using Sasha's great advice, I did the cor.test and got the following: Pearson's product-moment correlation data: measurements$l.hand - measurements$r.hand and measurements$sociable t = 0.2148, df = 150, p-value = 0.8302 alternative hypothesis: true correlation is not equal to 0 95 percent confidence interval: -0.1420623 0.1762437 sample estimates: cor 0.01753501 I have never used this test before, so am unsure how to intepret it...you wouldn't think I was on my fourth Scientific degree would you?! :(

  Read the article

• Insert or Update using Oracle and PL/SQL

  - by Shane

  I have a PL/SQL function that performs an update/insert on an Oracle database that maintains a target total and returns the difference between the existing value and the new value. Here is the code I have so far: FUNCTION calcTargetTotal(accountId varchar2, newTotal numeric ) RETURN number is oldTotal numeric(20,6); difference numeric(20,6); begin difference := 0; begin select value into oldTotal from target_total WHERE account_id = accountId for update of value; if (oldTotal != newTotal) then update target_total set value = newTotal WHERE account_id = accountId difference := newTotal - oldTotal; end if; exception when NO_DATA_FOUND then begin difference := newTotal; insert into target_total ( account_id, value ) values ( accountId, newTotal ); -- sometimes a race condition occurs and this stmt fails -- in those cases try to update again exception when DUP_VAL_ON_INDEX then begin difference := 0; select value into oldTotal from target_total WHERE account_id = accountId for update of value; if (oldTotal != newTotal) then update target_total set value = newTotal WHERE account_id = accountId difference := newTotal - oldTotal; end if; end; end; end; return difference end calcTargetTotal; This works as expected in unit tests with multiple threads never failing. However when loaded on a live system we have seen this fail with a stack trace looking like this: ORA-01403: no data found ORA-00001: unique constraint () violated ORA-01403: no data found The line numbers (which I have removed since they are meaningless out of context) verify that the first update fails due to no data, the insert fail due to uniqueness, and the 2nd update is failing with no data, which should be impossible. From what I have read on other thread a MERGE statement is also not atomic and could suffer similar problems. Does anyone have any ideas how to prevent this from occurring?

  Read the article

• Using shared_ptr to implement RCU (read-copy-update)?

  - by yongsun

  I'm very interested in the user-space RCU (read-copy-update), and trying to simulate one via tr1::shared_ptr, here is the code, while I'm really a newbie in concurrent programming, would some experts help me to review? The basic idea is, reader calls get_reading_copy() to gain the pointer of current protected data (let's say it's generation one, or G1). writer calls get_updating_copy() to gain a copy of the G1 (let's say it's G2), and only one writer is allowed to enter the critical section. After the updating is done, writer calls update() to do a swap, and make the m_data_ptr pointing to data G2. The ongoing readers and the writer now hold the shared_ptr of G1, and either a reader or a writer will eventually deallocate the G1 data. Any new readers would get the pointer to G2, and a new writer would get the copy of G2 (let's say G3). It's possible the G1 is not released yet, so multiple generations of data my co-exists. template <typename T> class rcu_protected { public: typedef T type; typedef std::tr1::shared_ptr<type> rcu_pointer; rcu_protected() : m_data_ptr (new type()) {} rcu_pointer get_reading_copy () { spin_until_eq (m_is_swapping, 0); return m_data_ptr; } rcu_pointer get_updating_copy () { spin_until_eq (m_is_swapping, 0); while (!CAS (m_is_writing, 0, 1)) {/* do sleep for back-off when exceeding maximum retry times */} rcu_pointer new_data_ptr(new type(*m_data_ptr)); // as spin_until_eq does not have memory barrier protection, // we need to place a read barrier to protect the loading of // new_data_ptr not to be re-ordered before its construction _ReadBarrier(); return new_data_ptr; } void update (rcu_pointer new_data_ptr) { while (!CAS (m_is_swapping, 0, 1)) {} m_data_ptr.swap (new_data_ptr); // as spin_until_eq does not have memory barrier protection, // we need to place a write barrier to protect the assignments of // m_is_writing/m_is_swapping be re-ordered bofore the swapping _WriteBarrier(); m_is_writing = 0; m_is_swapping = 0; } private: volatile long m_is_writing; volatile long m_is_swapping; rcu_pointer m_data_ptr; };

  Read the article

• My QFileSystemModel doesn't work as expected in PyQt

  - by Skilldrick

  I'm learning the Qt Model/View architecture at the moment, and I've found something that doesn't work as I'd expect it to. I've got the following code (adapted from Qt Model Classes): from PyQt4 import QtCore, QtGui model = QtGui.QFileSystemModel() parentIndex = model.index(QtCore.QDir.currentPath()) print model.isDir(parentIndex) #prints True print model.data(parentIndex).toString() #prints name of current directory childIndex = model.index(0, 0, parentIndex) print model.data(childIndex).toString() rows = model.rowCount(parentIndex) print rows #prints 0 (even though the current directory has directory and file children) The question: Is this a problem with PyQt, have I just done something wrong, or am I completely misunderstanding QFileSystemModel? According to the documentation, model.rowCount(parentIndex) should return the number of children in the current directory. The QFileSystemModel docs say that it needs an instance of a Gui application, so I've also placed the above code in a QWidget as follows, but with the same result: import sys from PyQt4 import QtCore, QtGui class Widget(QtGui.QWidget): def __init__(self, parent=None): QtGui.QWidget.__init__(self, parent) model = QtGui.QFileSystemModel() parentIndex = model.index(QtCore.QDir.currentPath()) print model.isDir(parentIndex) print model.data(parentIndex).toString() childIndex = model.index(0, 0, parentIndex) print model.data(childIndex).toString() rows = model.rowCount(parentIndex) print rows def main(): app = QtGui.QApplication(sys.argv) widget = Widget() widget.show() sys.exit(app.exec_()) if __name__ == '__main__': main()

  Read the article

• How to restrict date range of a jquery datepicker by giving two dates?

  - by Harie

  I am having two dates that is stored in db and am selecting it using $.ajax() and what i need is to show the datepicker values between the dates I selected from db. Here is my code for it.But it is not working properly function setDatePickerSettings(isFisc) { var fSDate, fEDate; $.ajax({ type: "POST", url: '../Asset/Handlers/AjaxGetData.ashx?fisc=1', success: function(data) { alert(data); var res = data.split("--");//data will be 4/4/2010 12:00:00--5/4/2011 12:00:00 var sDate = res[0].split(getSeparator(res[0])); alert("Separator " + getSeparator(res[1]) + " Starts " + sDate); var eDate = res[1].split(getSeparator(res[1])); alert("End " + eDate); alert("sub " + sDate[0]); fSDate = new Date(sDate[2].substring(0, 4), sDate[0], sDate[1]); alert("Starts " + fSDate.substring(0, 4)); fEDate = new Date(eDate[2].substring(0, 4), eDate[0], eDate[1]); alert("eND " + fEDate.toString()); } }); var dtSettings = { changeMonth: true, changeYear: true, showOn: 'both', buttonImage: clientURL + 'images/calendar.png', buttonImageOnly: true, showStatus: true, showOtherMonths: false, dateFormat: 'dd/mm/yy', minDate:fSDate, //assigning startdate maxDate:fEDate //assigning enddate }; return dtSettings; } Pls provide some solution. I need the datetime picker which requires values between that range. Thanks in advance

  Read the article

• Python: Does one of these examples waste more memory?

  - by orokusaki

  In a Django view function which uses manual transaction committing, I have: context = RequestContext(request, data) transaction.commit() return render_to_response('basic.html', data, context) # Returns a Django ``HttpResponse`` object which is similar to a dictionary. I think it is a better idea to do this: context = RequestContext(request, data) response = render_to_response('basic.html', data, context) transaction.commit() return response If the page isn't rendered correctly in the second version, the transaction is rolled back. This seems like the logical way of doing it albeit there won't likely be many exceptions at that point in the function when the application is in production. But... I fear that this might cost more and this will be replete through a number of functions since the application is heavy with custom transaction handling, so now is the time to figure out. If the HttpResponse instance is in memory already (at the point of render_to_response()), then what does another reference cost? When the function ends, doesn't the reference (response variable) go away so that when Django is done converting the HttpResponse into a string for output Python can immediately garbage collect it? Is there any reason I would want to use the first version (other than "It's 1 less line of code.")?

  Read the article

• Database abstraction/adapters for ruby

  - by Stiivi

  What are the database abstractions/adapters you are using in Ruby? I am mainly interested in data oriented features, not in those with object mapping (like active record or data mapper). I am currently using Sequel. Are there any other options? I am mostly interested in: simple, clean and non-ambiguous API data selection (obviously), filtering and aggregation raw value selection without field mapping: SELECT col1, col2, col3 = [val1, val2, val3] not hash of { :col1 = val1 ...} API takes into account table schemas 'some_schema.some_table' in a consistent (and working) way; also reflection for this (get schema from table) database reflection: get list of table columns, their database storage types and perhaps adaptor's abstracted types table creation, deletion be able to work with other tables (insert, update) in a loop enumerating selection from another table without requiring to fetch all records from table being enumerated Purpose is to manipulate data with unknown structure at the time of writing code, which is the opposite to object mapping where structure or most of the structure is usually well known. I do not need the object mapping overhead. What are the options, including back-ends for object-mapping libraries?

  Read the article

• c programming malloc question

  - by user535256

  Hello guys, Just got query regarding c malloc() function. I am read()ing x number of bytes from a file to get lenght of filename, like ' read(file, &namelen, sizeof(unsigned char)); ' . The variable namelen is a type unsigned char and was written into file as that type (1 byte). Now namelen has the lenght of filename ie namelen=8 if file name was 'data.txt', plus extra /0 at end, that working fine. Now I have a structure recording file info, ie filename, filelenght, content size etc. struct fileinfo { char *name; ...... other variable like size etc }; struct fileinfo *files; Question: I want to make that files.name variable the size of namelen ie 8 so I can successfully write the filename into it, like ' files[i].name = malloc(namelen) ' However, I dont want it to be malloc(sizeof(namelen)) as that would make it file.name[1] as the size of its type unsigned char. I want it to be the value thats stored inside variable &namelen ie 8 so file.name[8] so data.txt can be read() from file as 8 bytes and written straight into file.name[8? Is there a way to do this my current code is this and returns 4 not 8 files[i].name = malloc(namelen); //strlen(files[i].name) - returns 4 //perhaps something like malloc(sizeof(&namelen)) but does not work Thanks for any suggestions Have tried suggested suggestions guys, but I now get a segmentation fault error using: printf("\nsizeofnamelen=%x\n",namelen); //gives 8 for data.txt files[i].name = malloc(namelen + 1); read(file, &files[i].name, namelen); int len=strlen(files[i].name); printf("\nnamelen=%d",len); printf("\nname=%s\n",files[i].name); When I try to open() file with that files[i].name variable it wont open so the data does not appear to be getting written inside the read() &files[i].name and strlen() causes segemntation error as well as trying to print the filename

  Read the article

• How to make an AJAX call immediately on document loading

  - by Ankur

  I want to execute an ajax call as soon as a document is loaded. What I am doing is loading a string that contains data that I will use for an autocomplete feature. This is what I have done, but it is not calling the servlet. I have removed the calls to the various JS scripts to make it clearer. I have done several similar AJAX calls in my code but usually triggered by a click event, I am not sure what the syntax for doing it as soon as the document loads, but I thought this would be it (but it's not): <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <script type="text/javascript"> $(document).ready(function(){ $.ajax({ type: "GET", url: "AutoComplete", dataType: 'json', data: queryString, success: function(data) { var dataArray = data; alert(dataArray); } }); $("#example").autocomplete(dataArray); }); </script> <title></title> </head> <body> API Reference: <form><input id="example"> (try "C" or "E")</form> </body> </html>

  Read the article

• add namespace + prefix to XML using XSL

  - by Jan

  Hi, I hope you can help... Let's assume I have following XML: <data> <token> <sessionId>12345</sessionId> <userId>john</userId> <moreInfo> <bla> ..... </bla> </moreInfo> </token> </data> And I need this to become <login:data xmlns="http://my.ns.uri"> <login:token> <login:sessionId>12345</sessionId> <login:userId>john</userId> <login:moreInfo> <login:bla> ..... </login:bla> </login:moreInfo> </login:token> </login:data> Can I do this with XSL? I did try but failed miserably ... Any help would be greatly appreciated! Thanks, Jan

  Read the article

• Are there good reasons not to use an ORM?

  - by hangy

  During my apprenticeship, I have used NHibernate for some smaller projects which I mostly coded and designed on my own. Now, before starting some bigger project, the discussion arose how to design data access and whether or not to use an ORM layer. As I am still in my apprenticeship and still consider myself a beginner in enterprise programming, I did not really try to push in my opinion, which is that using an object relational mapper to the database can ease development quite a lot. The other coders in the development team are much more experienced than me, so I think I will just do what they say. :-) However, I do not completely understand two of the main reasons for not using NHibernate or a similar project: One can just build one’s own data access objects with SQL queries and copy those queries out of Microsoft SQL Server Management Studio. Debugging an ORM can be hard. So, of course I could just build my data access layer with a lot of SELECTs etc, but here I miss the advantage of automatic joins, lazy-loading proxy classes and a lower maintenance effort if a table gets a new column or a column gets renamed. (Updating numerous SELECT, INSERT and UPDATE queries vs. updating the mapping config and possibly refactoring the business classes and DTOs.) Also, using NHibernate you can run into unforeseen problems if you do not know the framework very well. That could be, for example, trusting the Table.hbm.xml where you set a string’s length to be automatically validated. However, I can also imagine similar bugs in a “simple” SqlConnection query based data access layer. Finally, are those arguments mentioned above really a good reason not to utilise an ORM for a non-trivial database based enterprise application? Are there probably other arguments they/I might have missed? (I should probably add that I think this is like the first “big” .NET/C# based application which will require teamwork. Good practices, which are seen as pretty normal on Stack Overflow, such as unit testing or continuous integration, are non-existing here up to now.)

  Read the article

• Why is alert not run even though $.getJSON runs fine? (Callback not executed, even though the reques

  - by Emre Sevinç

  I have a snippet of code such as: $.getJSON("http://mysite.org/polls/saveLanguageTest?url=" + escape(window.location.href) + "&callback=?", function (data) { var serverResponse = data.result; console.log(serverResponse); alert(serverResponse); }); It works fine in the sense that it makes a cross-domain request to my server and the server saves the data as I expect. Unfortunately, even though the server saves data and sends back a response I just can't get any alert or the console.log run. Why may be that? The server side code is (if that is relevant): def saveLanguageTest(request): callback = request.GET.get('callback', '') person = Person(firstName = 'Anonymous', ipAddress = request.META['REMOTE_ADDR']) person.save() webPage = WebPage(url = request.GET.get('url')) webPage.save() langTest = LanguageTest(type = 'prepositionTest') langTest.person = person langTest.webPage = webPage langTest.save() req ['result'] = 'Your test is saved.' response = json.dumps(req) response = callback + '(' + response + ');' return HttpResponse(response, mimetype = "application/json") What am I missing? (I tried the same code both within my web pages and inside the Firebug and I always have the problem stated above.)

  Read the article

• Zend_Auth and database SaveHandler

  - by takeshin

  I have created Zend_Auth adapter implementing Zend_Auth_Adapter_Interface (similar to Pádraic's adapter) and created simple ACL plugin. Everything works fine with default session handler. So far, so good. As a next step I have created custom Session SaveHandler to persist session data in the database. My implementation is very similar to this one from parables-demo. Seems that everything is working fine. Session data are properly saved to the database, session objects are serialized, but authentication does not work when I enable this custom SaveHandler. I have debugged the authentication and all works fine up till the next request, when the authentication data are lost. I suspected, that is has something to do with the fact, that I use $adapter->write($object) instead $adapter->write($string), but the same happens with strings. I'm bootstrapping Zend_Application_Resource_Session in the first Bootstrap method, as early as possible. Does Zend_Auth need any extra configuration to persist data in the database? Why the authentity is being lost?

  Read the article

• jquery checkbox and array help

  - by sea_1987

  Hi There I need to get the names and values of checkboxes that have been checked into an array name selected, I cannot for life of me get it working, below is my attempt, if someone could clrify what I am doing wrong that would be brilliant. //Location AJAX //var dataObject = new Object(); var selected = new Array(); $('#areas input.radio').change(function(){ // will trigger when the checked status changes var checked = $(this).attr("checked"); // will return "checked" or false I think. // Do whatever request you like with the checked status if(checked == true) { /*$("input:checked").each(function() { selected.push($(this).attr('name')+"="+$(this).val(); }); alert(selected)*/ getQuery = $(this).attr('name')+"="+$(this).val()+"&location_submit=Next"; $.ajax({ type:"POST", url:"/search/location", data: getQuery, success:function(data){ alert(getQuery); console.log(data); // $('body.secEmp').html(data); } }); } else { //do something to remove the content here alert("Remove"); } });

  Read the article

• Android - How can I upload a txt file to a website?

  - by Donal Rafferty

  I want to upload a txt file to a website, I'll admit I haven't looked into it in any great detail but I have looked at a few examples and would like more experienced opinions on whether I'm going in the right direction. Here is what I have so far: DefaultHttpClient httpClient = new DefaultHttpClient(); HttpContext localContext = new BasicHttpContext(); private String ret; HttpResponse response = null; HttpPost httpPost = null; public String postPage(String url, String data, boolean returnAddr) { ret = null; httpClient.getParams().setParameter(ClientPNames.COOKIE_POLICY, CookiePolicy.RFC_2109); httpPost = new HttpPost(url); response = null; StringEntity tmp = null; try { tmp = new StringEntity(data,"UTF-8"); } catch (UnsupportedEncodingException e) { System.out.println("HTTPHelp : UnsupportedEncodingException : "+e); } httpPost.setEntity(tmp); try { response = httpClient.execute(httpPost,localContext); } catch (ClientProtocolException e) { System.out.println("HTTPHelp : ClientProtocolException : "+e); } catch (IOException e) { System.out.println("HTTPHelp : IOException : "+e); } ret = response.getStatusLine().toString(); return ret; } And I call it as follows: postPage("http://www.testwebsite.com", "data/data/com.testxmlpost.xml/files/logging.txt", true)); I want to be able to upload a file from the device to a website. But when trying this way I get the following response back. HTTP/1.1 405 Method Not Allowed Am I trying the correct way or should I be doing it another way?

  Read the article

• why does this knockout method receive a form element instead of the object its nested in?

  - by ladookie

  I have this HTML: <ul class="chat_list" data-bind="foreach: chats"> <li> <div class="chat_response" data-bind="visible: CommentList().length == 0"> <form data-bind="submit: $root.addComment"> <input class="comment_field" placeholder="Comment…" data-bind="value: NewCommentText" /> </form> </div> </li> </ul> and this JavaScript: function ChatListViewModel(chats) { // var self = this; self.chats = ko.observableArray(ko.utils.arrayMap(chats, function (chat) { return { CourseItemDescription: chat.CourseItemDescription, CommentList: ko.observableArray(chat.CommentList), CourseItemID: chat.CourseItemID, UserName: chat.UserName, ChatGroupNumber: chat.ChatGroupNumber, ChatCount: chat.ChatCount, NewCommentText: ko.observable("") }; })); self.newChatText = ko.observable(); self.addComment = function (chat) { var newComment = { CourseItemDescription: chat.NewCommentText(), ParentCourseItemID: chat.CourseItemID, CourseID: $.CourseLogic.dataitem.CourseID, AccountID: $.CourseLogic.dataitem.AccountID, SystemObjectID: $.CourseLogic.dataitem.CommentSystemObjectID, SystemObjectName: "Comments", UserName: chat.UserName }; chat.CommentList.push(newComment); chat.NewCommentText(""); }; } ko.applyBindings(new ChatListViewModel(initialData)); When I go into the debugger it shows that the chat parameter of the addComment() function is a form element instead of a chat object. Why is this happening?

  Read the article

• MS Access Bulk Insert exits app

  - by Brij

  In the web service, I have to bulk insert data in MS Access database. First, There was single complex Insert-Select query,There was no error but app exited after inserting some records. I have divided the query to make it simple and using linq to remove complexity of query. now I am inserting records using for loop. there are approx 10000 records. Again, same problem. I put a breakpoint after loop, but No hit. I have used try catch, but no error found. For Each item In lstSelDel Try qry = String.Format("insert into Table(Id,link,file1,file2,pID) values ({0},""{1}"",""{2}"",""{3}"",{4})", item.WebInfoID, item.Links, item.Name, item.pName, pDateID) DAL.ExecN(qry) Catch ex As Exception Throw ex End Try Next Public Shared Function ExecN(ByVal SQL As String) As Integer Dim ret As Integer = -1 Dim nowConString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + System.AppDomain.CurrentDomain.BaseDirectory + "DataBase\\mydatabase.mdb;" Dim nowCon As System.Data.OleDb.OleDbConnection nowCon = New System.Data.OleDb.OleDbConnection(nowConString) Dim cmd As New OleDb.OleDbCommand(SQL, nowCon) nowCon.Open() ret = cmd.ExecuteNonQuery() nowCon.Close() nowCon.Dispose() cmd.Dispose() Return ret End Function After exiting app, I see w3wp.exe uses more than 50% of Memory. Any idea, What is going wrong? Is there any limitation of MS Access?

  Read the article

• Best way to migrate export/import from SQL Server to oracle

  - by matao

  Hi guys! I'm faced with needing access for reporting to some data that lives in Oracle and other data that lives in a SQL Server 2000 database. For various reasons these live on different sides of a firewall. Now we're looking at doing an export/import from sql server to oracle and I'd like some advice on the best way to go about it... The procedure will need to be fully automated and run nightly, so that excludes using the SQL developer tools. I also can't make a live link between databases from our (oracle) side as the firewall is in the way. The data needs to be transformed in the process from a star schema to a de-normalised table ready for reporting. What I'm thinking about is writing a monster query for SQL Server (which I mostly have already) that will denormalise and read out the data from SQL Server into a flat file using the sql server equivalent of sqlplus as a scheduled task, dump into a Well Known Location, then on the oracle side have a cron job that copies down the file and loads it with sql loader and rebuilds indexes etc. This is all doable, but very manual. Is there one or a combination of FOSS or standard oracle/SQL Server tools that could automate this for me? the Irreducible complexity is the query on one side and building indexes on the other, but I would love to not have to write the CSV dumping detail or the SQL loader script, just say dump this view out to CSV on one side, and on the other truncate and insert into this table from CSV and not worry about mapping column names and all other arcane sqlldr voodoo... best practices? thoughts? comments? edit: I have about 50+ columns all of varying types and lengths in my dataset, which is why I'd prefer to not have to write out how to generate and map each single column...

  Read the article

• changing the serialization procedure for a graph of objects (.net framework)

  - by pierusch

  Hello I'm developing a scientific application using .net framework. The application depends heavily upon a large data structure (a tree like structure) that has been serialized using a standard binaryformatter object. The graph structure looks like this: <serializable()>Public class BigObjet inherits list(of smallObject) end class <serializable()>public class smallObject inherits list(of otherSmallerObjects) end class ... The binaryFormatter object does a nice job but it's not optimized at all and the entire data structure reaches around 100Mb on my filesystem. Deserialization works too but it's pretty slow (around 30seconds on my quad core). I've found a nice .dll on codeproject (see "optimizing serialization...") so I wrote a modified version of the classes above overriding the default serialization/deserialization procedure reaching very good results. The problem is this: I can't lose the data previosly serialized with the old version and I'd like to be able to use the new serialization/deserialization method. I have some ideas but I'm pretty sure someone will be able to give me a proper and better advice ! use an "helper" graph of objects who takes care of the entire serialization/deserialization procedure reading data from the old format and converting them into the classes I nedd. This could work but the binaryformatter "needs" to know the types being serialized so........ :( modify the "old" graph to include a modified version of serialization procedure...so I'll be able to deserialize old file and save them with the new format......this doesn't sound too good imho. well any help will be higly highly appreciated :)

  Read the article

• Javascript Closures, Callbacks, This and That

  - by nazbot

  I am having some trouble getting a callback function to work. Here is my code: SomeObject.prototype.refreshData = function() { var read_obj = new SomeAjaxCall("read_some_data", { }, this.readSuccess, this.readFail); } SomeObject.prototype.readSuccess = function(response) { this.data = response; this.someList = []; for (var i = 0; i < this.data.length; i++) { var systemData = this.data[i]; var system = new SomeSystem(systemData); this.someList.push(system); } this.refreshList(); } Basically SomeAjaxCall is making an ajax request for data. If it works we use the callback 'this.readSuccess' and if it fails 'this.readFail'. I have figured out that 'this' in the SomeObject.readSuccess is the global this (aka the window object) because my callbacks are being called as functions and not member methods. My understanding is that I need to use closures to keep the 'this' around, however, I have not been able to get this to work. If someone is able show me what I should be doing I would appreciate it greatly. I am still wrapping my head around how closures work and specifically how they would work in this situation. Thanks!

  Read the article

• Finding a list of indices from master array using secondary array with non-unique entries

  - by fideli

  I have a master array of length n of id numbers that apply to other analogous arrays with corresponding data for elements in my simulation that belong to those id numbers (e.g. data[id]). Were I to generate a list of id numbers of length m separately and need the information in the data array for those ids, what is the best method of getting a list of indices idx of the original array of ids in order to extract data[idx]? That is, given: a=numpy.array([1,3,4,5,6]) # master array b=numpy.array([3,4,3,6,4,1,5]) # secondary array I would like to generate idx=numpy.array([1,2,1,4,2,0,3]) The array a is typically in sequential order but it's not a requirement. Also, array b will most definitely have repeats and will not be in any order. My current method of doing this is: idx=numpy.array([numpy.where(a==bi)[0][0] for bi in b]) I timed it using the following test: a=(numpy.random.uniform(100,size=100)).astype('int') b=numpy.repeat(a,100) timeit method1(a,b) 10 loops, best of 3: 53.1 ms per loop Is there a better way of doing this?

  Read the article

• Update list dom only if list displayed

  - by Nikolaj Borisik

  Sometimes we use one store for few views(list, carousel,dataviews) and when we refresh(load, filter) store data, dom of all view that use this store will be rebuild, but some views is not displayed in this time, and may be will not show with these data. How we can refresh list dom only if it displayed, not every time when it store refresh? Issue examle Ext.define("Test.view.Main", { extend: 'Ext.tab.Panel', config: { tabBarPosition: 'bottom', items: [ ] }, constructor : function(){ this.callParent(arguments); var store = Ext.create('Ext.data.Store',{ data :[ {title : 'One'}, {title : 'Two'}, {title : 'Three'} ] }), firstList = Ext.create('Ext.List',{ title : 'tab1', store : store, itemTpl : '{title}', onItemDisclosure : function(){ store.add({title : 'Four'}); } }), secondList = Ext.create('Ext.List',{ title : 'tab2' , store : store, itemTpl : '{title}' }), thirdList = Ext.create('Ext.List',{ title : 'tab3', store : store, itemTpl : '{title}' }); this.add([ firstList, secondList, thirdList ]) ; } }); When tap on item in the first list, in store will be added new item. And dom of all list will be change although second and third list not displayed I see one option. Create one main store and create separate stores for each views. And when view show fill it store from Main store. But it look not good. Any other ideas?

  Read the article

• fetching the label text from database in C#

  - by Yilmaz Paçariz

  private void button5_Click(object sender, EventArgs e) { SqlConnection conn = new SqlConnection("Data Source=MAZI-PC\\PROJECTACC;Initial Catalog=programDB;Integrated Security=True"); SqlCommand cmd = new SqlCommand("select label_sh from label_text where label_form='2' and label_form_labelID='1'", conn); conn.Open(); label1.Text = cmd.ExecuteReader().ToString(); conn.Close(); SqlConnection conn1 = new SqlConnection("Data Source=MAZI-PC\\PROJECTACC;Initial Catalog=programDB;Integrated Security=True"); SqlCommand cmd1 = new SqlCommand("select label_sh from label_text where label_form='2' and label_form_labelID='2'", conn1); conn1.Open(); label2.Text = cmd1.ExecuteReader().ToString(); conn1.Close(); SqlConnection conn2 = new SqlConnection("Data Source=MAZI-PC\\PROJECTACC;Initial Catalog=programDB;Integrated Security=True"); SqlCommand cmd2 = new SqlCommand("select label_sh from label_text where label_form='2' and label_form_labelID='3'", conn2); conn2.Open(); label3.Text = cmd2.ExecuteReader().ToString(); conn2.Close(); } I am developing a small project in C#... Using Visiual Studio 2010... I want to fetch the label texts from database in order to change the user interface language with a button... I wrote this code but there is a problem in SQLDATAREADER in label text parts it shows System.Data.SqlClient.SqlDataReader I cant fix, could you help me?

  Read the article

• Need an advice for unit testing using mock object

  - by Andree

  Hi there, I just recently read about "Mocking objects" for unit testing and currently I'm having a difficulties implementing this approach in my application. Please let me explain my problem. I have a User model class, which is dependent on 2 data sources (database and facebook web service). The controller class simply use this User model as an interface to access data and it doesn't care about where the data came from. Currently I never done any unit test to this User model because it is dependent on an external web service. But just a while ago, I read about object mocking and now I know that it is a common approach to unit test a class that depends on external resources (like in my case). Now I want to create a unit test for the User model, but then I encountered a design issue: In order for the User model to use a mocked Facebook SDK, I have to inject this mocked Facebook SDK to the User object (probably using a setter). Therefore I can't construct the Facebook SDK inside the User object. I have to construct it outside the User object, and inject the SDK into the User object. The real client of my User model is the application's controller. Therefore I have to construct the Facebook SDK inside the controller and inject it to the user object. Well, this is a problem because I want my controller to be as clean as possible. I want my controller to be ignorant about the application's data source. I'm not good at explaining something systematically, so you'll probably sleeping before reading this last paragraph. But anyway, I want to ask if anyone here ever encountered the same problem as mine? How do you solve this problem? Regards, Andree

  Read the article

• Advantage of WPF app vs Winform for business apps?

  - by Abdu

  I know asp.net and winform development. I am not the type of developer who jumps into a new technology just because it's new. It needs to give me extra benefits like higher productivity. What are the advantages of WPF over Winforms for pure business apps? I am not interested in the extra eye candy, animation, gradients, image display effects and so on which WPF provides. The business apps are for data entry, data reporting and maybe some charts and static display of photos. How will WPF help in these apps? Better richer data binding? WinForm is a mature proven technology and I like the fact I can do everything in Visual Studio vs multiple IDE's for WPF (VS & Blend family). Plus I think WPF doesn't have as rich data binding controls like their Winform counterparts (DataGridView..etc). AFAIK, Microsoft will still support Winforms for many years. Try to convince someone like me to switch.

  Read the article

< Previous Page | 756 757 758 759 760 761 762 763 764 765 766 767  | Next Page >