Search Results

Search found 19446 results on 778 pages for 'network printer'.

Page 761/778 | < Previous Page | 757 758 759 760 761 762 763 764 765 766 767 768  | Next Page >

• wireless LAN soft blocked on Ubuntu 13.10

  - by iacopo

  I've troubles with bluetooth and with lan. When I digit: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no When I digit: lspci -v 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Flags: bus master, 66MHz, medium devsel, latency 0 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at f000 [size=256] Memory at feb00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: radeon 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at feb48000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: xhci_hcd 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: Advanced Micro Devices, Inc. [AMD] Device 7800 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 45 I/O ports at f190 [size=8] I/O ports at f180 [size=4] I/O ports at f170 [size=8] I/O ports at f160 [size=4] I/O ports at f150 [size=16] Memory at feb50000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: ahci 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4f000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4e000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4c000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller Flags: 66MHz, medium devsel Kernel driver in use: piix4_smbus 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at f100 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (prog-if 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller Flags: bus master, 66MHz, medium devsel, latency 39, IRQ 16 Memory at feb4a000 (64-bit, non-prefetchable) [size=256] Kernel driver in use: sdhci-pci 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Capabilities: Kernel driver in use: pcieport 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe900000-feafffff Capabilities: Kernel driver in use: pcieport 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0 Flags: fast devsel 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1 Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2 Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3 Flags: fast devsel Capabilities: Kernel driver in use: k10temp 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4 Flags: fast devsel 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5 Flags: fast devsel 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) Subsystem: PC Partner Limited / Sapphire Technology Device 0123 Flags: bus master, fast devsel, latency 0, IRQ 46 I/O ports at e000 [size=256] Memory at d0004000 (64-bit, prefetchable) [size=4K] Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Subsystem: AzureWave Device 2b87 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at fea40000 (32-bit, non-prefetchable) [size=64K] Memory at fea30000 (32-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: rt2800pci 03:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth Subsystem: AzureWave Device 2787 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fea20000 (32-bit, non-prefetchable) [size=64K] Memory at fea10000 (32-bit, non-prefetchable) [size=64K] Memory at fe900000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fea00000 [disabled] [size=64K] Capabilities: Thank you for all the help

  Read the article

• Making a Case For The Command Line

  - by Jesse Taber

  Originally posted on: http://geekswithblogs.net/GruffCode/archive/2013/06/30/making-a-case-for-the-command-line.aspxI have had an idea percolating in the back of my mind for over a year now that I’ve just recently started to implement. This idea relates to building out “internal tools” to ease the maintenance and on-going support of a software system. The system that I currently work on is (mostly) web-based, so we traditionally we have built these internal tools in the form of pages within the app that are only accessible by our developers and support personnel. These pages allow us to perform tasks within the system that, for one reason or another, we don’t want to let our end users perform (e.g. mass create/update/delete operations on data, flipping switches that turn paid modules of the system on or off, etc). When we try to build new tools like this we often struggle with the level of effort required to build them. Effort Required Creating a whole new page in an existing web application can be a fairly large undertaking. You need to create the page and ensure it will have a layout that is consistent with the other pages in the app. You need to decide what types of input controls need to go onto the page. You need to ensure that everything uses the same style as the rest of the site. You need to figure out what the text on the page should say. Then, when you figure out that you forgot about an input that should really be present you might have to go back and re-work the entire thing. Oh, and in addition to all of that, you still have to, you know, write the code that actually performs the task. Everything other than the code that performs the task at hand is just overhead. We don’t need a fancy date picker control in a nicely styled page for the vast majority of our internal tools. We don’t even really need a page, for that matter. We just need a way to issue a command to the application and have it, in turn, execute the code that we’ve written to accomplish a given task. All we really need is a simple console application! Plumbing Problems A former co-worker of mine, John Sonmez, always advocated the Unix philosophy for building internal tools: start with something that runs at the command line, and then build a UI on top of that if you need to. John’s idea has a lot of merit, and we tried building out some internal tools as simple Console applications. Unfortunately, this was often easier said that done. Doing a “File –> New Project” to build out a tool for a mature system can be pretty daunting because that new project is totally empty.  In our case, the web application code had a lot of of “plumbing” built in: it managed authentication and authorization, it handled database connection management for our multi-tenanted architecture, it managed all of the context that needs to follow a user around the application such as their timezone and regional/language settings. In addition, the configuration file for the web application  (a web.config in our case because this is an ASP .NET application) is large and would need to be reproduced into a similar configuration file for a Console application. While most of these problems are could be solved pretty easily with some refactoring of the codebase, building Console applications for internal tools still potentially suffers from one pretty big drawback: you’d have to execute them on a machine with network access to all of the needed resources. Obviously, our web servers can easily communicate the the database servers and can publish messages to our service bus, but the same is not true for all of our developer and support personnel workstations. We could have everyone run these tools remotely via RDP or SSH, but that’s a bit cumbersome and certainly a lot less convenient than having the tools built into the web application that is so easily accessible. Mix and Match So we need a way to build tools that are easily accessible via the web application but also don’t require the overhead of creating a user interface. This is where my idea comes into play: why not just build a command line interface into the web application? If it’s part of the web application we get all of the plumbing that comes along with that code, and we’re executing everything on the web servers which means we’ll have access to any external resources that we might need. Rather than having to incur the overhead of creating a brand new page for each tool that we want to build, we can create one new page that simply accepts a command in text form and executes it as a request on the web server. In this way, we can focus on writing the code to accomplish the task. If the tool ends up being heavily used, then (and only then) should we consider spending the time to build a better user experience around it. To be clear, I’m not trying to downplay the importance of building great user experiences into your system; we should all strive to provide the best UX possible to our end users. I’m only advocating this sort of bare-bones interface for internal consumption by the technical staff that builds and supports the software. This command line interface should be the “back end” to a highly polished and eye-pleasing public face. Implementation As I mentioned at the beginning of this post, this is an idea that I’ve had for awhile but have only recently started building out. I’ve outlined some general guidelines and design goals for this effort as follows: Text in, text out: In the interest of keeping things as simple as possible, I want this interface to be purely text-based. Users will submit commands as plain text, and the application will provide responses in plain text. Obviously this text will be “wrapped” within the context of HTTP requests and responses, but I don’t want to have to think about HTML or CSS when taking input from the user or displaying responses back to the user. Task-oriented code only: After building the initial “harness” for this interface, the only code that should need to be written to create a new internal tool should be code that is expressly needed to accomplish the task that the tool is intended to support. If we want to encourage and enable ourselves to build good tooling, we need to lower the barriers to entry as much as possible. Built-in documentation: One of the great things about most command line utilities is the ‘help’ switch that provides usage guidelines and details about the arguments that the utility accepts. Our web-based command line utility should allow us to build the documentation for these tools directly into the code of the tools themselves. I finally started trying to implement this idea when I heard about a fantastic open-source library called CLAP (Command Line Auto Parser) that lets me meet the guidelines outlined above. CLAP lets you define classes with public methods that can be easily invoked from the command line. Here’s a quick example of the code that would be needed to create a new tool to do something within your system: 1: public class CustomerTools 2: { 3: [Verb] 4: public void UpdateName(int customerId, string firstName, string lastName) 5: { 6: //invoke internal services/domain objects/hwatever to perform update 7: } 8: } This is just a regular class with a single public method (though you could have as many methods as you want). The method is decorated with the ‘Verb’ attribute that tells the CLAP library that it is a method that can be invoked from the command line. Here is how you would invoke that code: Parser.Run(args, new CustomerTools()); Note that ‘args’ is just a string[] that would normally be passed passed in from the static Main method of a Console application. Also, CLAP allows you to pass in multiple classes that define [Verb] methods so you can opt to organize the code that CLAP will invoke in any way that you like. You can invoke this code from a command line application like this: SomeExe UpdateName -customerId:123 -firstName:Jesse -lastName:Taber ‘SomeExe’ in this example just represents the name of .exe that is would be created from our Console application. CLAP then interprets the arguments passed in order to find the method that should be invoked and automatically parses out the parameters that need to be passed in. After a quick spike, I’ve found that invoking the ‘Parser’ class can be done from within the context of a web application just as easily as it can from within the ‘Main’ method entry point of a Console application. There are, however, a few sticking points that I’m working around: Splitting arguments into the ‘args’ array like the command line: When you invoke a standard .NET console application you get the arguments that were passed in by the user split into a handy array (this is the ‘args’ parameter referenced above). Generally speaking they get split by whitespace, but it’s also clever enough to handle things like ignoring whitespace in a phrase that is surrounded by quotes. We’ll need to re-create this logic within our web application so that we can give the ‘args’ value to CLAP just like a console application would. Providing a response to the user: If you were writing a console application, you might just use Console.WriteLine to provide responses to the user as to the progress and eventual outcome of the command. We can’t use Console.WriteLine within a web application, so I’ll need to find another way to provide feedback to the user. Preferably this approach would allow me to use the same handler classes from both a Console application and a web application, so some kind of strategy pattern will likely emerge from this effort. Submitting files: Often an internal tool needs to support doing some kind of operation in bulk, and the easiest way to submit the data needed to support the bulk operation is in a file. Getting the file uploaded and available to the CLAP handler classes will take a little bit of effort. Mimicking the console experience: This isn’t really a requirement so much as a “nice to have”. To start out, the command-line interface in the web application will probably be a single ‘textarea’ control with a button to submit the contents to a handler that will pass it along to CLAP to be parsed and run. I think it would be interesting to use some javascript and CSS trickery to change that page into something with more of a “shell” interface look and feel. I’ll be blogging more about this effort in the future and will include some code snippets (or maybe even a full blown example app) as I progress. I also think that I’ll probably end up either submitting some pull requests to the CLAP project or possibly forking/wrapping it into a more web-friendly package and open sourcing that.

  Read the article

• Windows Azure Myths

  - by BuckWoody

  Windows Azure is part of the Microsoft "stack" - the suite of software and services we offer. Because we have so many products in almost every part of technology, it's hard to know everything about all parts of what we do - even for those of us who work here. So it's no surprise that some folks are not as familiar with Windows and SQL Azure as they are, say Windows Server or XBox. As I chat with folks about a solution for a business or organization need, I put Windows Azure into the mix. I always start off with "What do you already know about Windows Azure?" so that I don't bore folks with information they already have. I some cases they've checked out the product ahead of time and have specific questions, in others they aren't as familiar, and in still others there is a fair amount of mis-information. Sometimes that's because of a marketing failure, sometimes it's hearsay, and somtetimes it's active misinformation. I thought I might lay out a few of these misconceptions. As always - do your fact-checking! Never take anyone's word alone (including mine) as gospel. Make sure you educate yourself on your options. Your company or your clients depend on you to have the right information on IT, so make sure you live up to that. Myth 1: Nobody uses Windows Azure It's true that we don't give out numbers on the amount of clients on Windows and SQL Azure. But lots of folks are here - companies you may have heard of like Boeing, NASA, Fujitsu, The City of London, Nuedesic, and many others. I deal with firms small and large that use Windows Azure for mission-critical applications, sometimes totally on Windows and/or SQL Azure, sometimes in conjunction with an on-premises system, sometimes for only a specific component in Windows Azure like storage. The interesting thing is that many sites you visit have a Windows Azure component, or are running on Windows Azure. They just don't announce it. Just like the other cloud providers, the companies have asked to be completely branded themselves - they don't want you to be aware or care that they are on Windows Azure. Sometimes that's for security, other times it's for different reasons. It's just like the web sites you visit. For the most part, they don't advertise which OS or Web Server they use. It really just shouldn't matter. The point is that they just use what works to solve a given problem. Check out a few public case studies here: https://www.windowsazure.com/en-us/home/case-studies/ Myth 2: It's only for Microsoft stuff - can't use Open Source This is the one I face the most, and am the most dismayed by. We work just fine with many open source products, including Java, NodeJS, PHP, Ruby, Python, Hadoop, and many other languages and applications. You can quickly deploy a Wordpress, Umbraco and other "kits". We have software development kits (SDK's) for iPhones, iPads, Android, Windows phones and more. We have an SDK to work with FaceBook and other social networks. In short, we play well with others. More on the languages and runtimes we support here: https://www.windowsazure.com/en-us/develop/overview/ More on the SDK's here: http://www.wadewegner.com/2011/05/windows-azure-toolkit-for-ios/, http://www.wadewegner.com/2011/08/windows-azure-toolkits-for-devices-now-with-android/, http://azuretoolkit.codeplex.com/ Myth 3: Microsoft expects me to switch everything to "the cloud" No, we don't. That would be disasterous, unless the only things you run in your company uses works perfectly in Azure. Use Windows Azure  - or any cloud for that matter - where it works. Whenever I talk to companies, I focus on two things: Something that is broken and needs to be re-architected Something you want to do that is new If something is broken, and you need new tools to scale, extend, add capacity dynamically and so on, then you can consider using Windows or SQL Azure. It can help solve problems that you have, or it may include a component you don't want to write or architect yourself. Sometimes you want to do something new, like extend your company's offerings to mobile phones, to the web, or to a social network. More info on where it works here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Myth 4: I have to write code to use Windows and SQL Azure If Windows Azure is a PaaS - a Platform as a Service - then don't you have to write code to use it? Nope. Windows and SQL Azure are made up of various components. Some of those components allow you to write and deploy code (like Compute) and others don't. We have lots of customers using Windows Azure storage as a backup, to securely share files instead of using DropBox, to distribute videos or code or firmware, and more. Others use our High Performance Computing (HPC) offering to rent a supercomputer when they need one. You can even throw workloads at that using Excel! In addition there are lots of other components in Windows Azure you can use, from the Windows Azure Media Services to others. More here: https://www.windowsazure.com/en-us/home/scenarios/saas/ Myth 5: Windows Azure is just another form of "vendor lock-in" Windows Azure uses .NET, OSS languages and standard interfaces for the code. Sure, you're not going to take the code line-for-line and run it on a mainframe, but it's standard code that you write, and can port to something else. And the data is yours - you can bring it back whever you want. It's either in text or binary form, that you have complete control over. There are no licenses - you can "pay as you go", and when you're done, you can leave the service and take all your code, data and IP with you.   So go out there, read up, try it. Use it where it works. And don't believe everything you hear - sometimes the Internet doesn't get it all correct. :)

  Read the article

• CodePlex Daily Summary for Tuesday, October 01, 2013

  CodePlex Daily Summary for Tuesday, October 01, 2013Popular ReleasesDotNetNuke® Form and List: 06.00.06: DotNetNuke Form and List 06.00.06 Changes to 6.0.6•Add in Sql to remove 'text on row' setting for UserDefinedTable to make SQL Azure compatible. •Add new azureCompatible element to manifest. •Added a fix for importing templates. Changes to 6.0.2•Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 •Change: Data is now stored in nvarchar(max) instead of ntext Changes to 6.0.1•Scripts now compatible with SQL Azure. Changes to 6.0.0•Icons are shown in module action b...BlackJumboDog: Ver5.9.6: 2013.09.30 Ver5.9.6 (1)SMTP???????、???????????????? (2)WinAPI??????? (3)Web???????CGI???????????????????????Microsoft Ajax Minifier: Microsoft Ajax Minifier 5.2: Mostly internal code tweaks. added -nosize switch to turn off the size- and gzip-calculations done after minification. removed the comments in the build targets script for the old AjaxMin build task (discussion #458831). Fixed an issue with extended Unicode characters encoded inside a string literal with adjacent \uHHHH\uHHHH sequences. Fixed an IndexOutOfRange exception when encountering a CSS identifier that's a single underscore character (_). In previous builds, the net35 and net20...AJAX Control Toolkit: September 2013 Release: AJAX Control Toolkit Release Notes - September 2013 Release Version 7.0930September 2013 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4.5 – AJAX Control Toolkit for .NET 4.5 and sample site (Recommended). AJAX Control Toolkit .NET 4 – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - Instructions for using the AJAX Control Toolkit with ASP.NET 4.5 can b...WDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.4.apifix-alpha: WDTVHubGen.v2.1.4.apifix-alpha is for testers to figure out if we got the NEW api plugged in ok. thanksVisual Log Parser: VisualLogParser: Portable Visual Log Parser for Dotnet 4.0Random searcher i pochodne: Generatorek playlisty: Generuje playlisty w formacie .m3u. Na razie beta z bety - ale juz dziala i mozna uzywac.sb0t v.5: sb0t 5.15: Fixed bug in join filter. Fixed bug in pm blocking. Added new Crypto and Entities static classes to scripting. Updated the default node list.Trace Reader for Microsoft Dynamics CRM: Trace Reader (1.2013.9.29): Initial releaseAudioWordsDownloader: AudioWordsDownloader 1.1 build 88: New features list of words (mp3 files) is available upon typing when a download path is defined list of download paths is added paths history settings added Bug fixed case mismatch in word search field fixed path not exist bug fixed when history has been used path, when filled from dialog, not stored refresh autocomplete list after path change word sought is deleted when path is changed at the end sought word list is deleted word list not refreshed download ends. word lis...HD-Trailers.NET Downloader: HD-Trailer.Net Downloader v 2.1.5: This started out as an effort to improve the search for the corr3ct IMDB page for the movie. I think I have done that here. I have run about 200 movies and the correct movie was identified in all cases including some entries that were problematic in the past. I also swatted several bugs that popped up under special circumstances and resulted in exceptions. This version should be quite a bit better than previous versions. Let me know if there are any issues.Wsus Package Publisher: Release v1.3.1309.28: Fix a bug, where WPP crash when running on a computer where Windows was installed in another language than Fr, En or De, and launching the Update Creation Wizard. Fix a bug, where WPP crash if some Multi-Thread job are launch with more than 64 items. Add a button to abort "Install This Update" wizard. Allow WPP to remember which columns are shown last time. Make URL clickable on the Update Information Tab. Add a new feature, when Double-Clicking on an update, the default action exec...Tweetinvi a friendly Twitter C# API: Alpha 0.8.3.0: Version 0.8.3.0 emphasis on the FIlteredStream and ease how to manage Exceptions that can occur due to the network or any other issue you might encounter. Will be available through nuget the 29/09/2013. FilteredStream Features provided by the Twitter Stream API - Ability to track specific keywords - Ability to track specific users - Ability to track specific locations Additional features - Detect the reasons the tweet has been retrieved from the Filtered API. You have access to both the ma...AcDown?????: AcDown????? v4.5: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.5 ???? AcPlay????????v3.5 ????????，???????????30% ?? ???????GoodManga.net???? ?? ?????????? ?? ??Acfun?????????? ??Bilibili??????????? ?????????flvcd???????? ??SfAcg????????????? ???????????? ???????????????? ????32...C# Intellisense for Notepad++: Release v1.0.6.0: Added support for classless scripts To avoid the DLLs getting locked by OS use MSI file for the installation.SimpleExcelReportMaker: Serm 0.02: SourceCode and SampleMagick.NET: Magick.NET 6.8.7.001: Magick.NET linked with ImageMagick 6.8.7.0. Breaking changes: - ToBitmap method of MagickImage returns a png instead of a bmp. - Changed the value for full transparency from 255(Q8)/65535(Q16) to 0. - MagickColor now uses floats instead of Byte/UInt16.Media Companion: Media Companion MC3.578b: With the feedback received over the renaming of Movie Folders, and files, there has been some refinement done. As well as I would like to introduce Blu-Ray movie folder support, for Pre-Frodo and Frodo onwards versions of XBMC. To start with, Context menu option for renaming movies, now has three sub options: Movie & Folder, Movie only & Folder only. The option Manual Movie Rename needs to be selected from Movie Preferences, but the autoscrape boxes do not need to be selected. Blu Ray Fo...FFXIV Crafting Simulator: Crafting Simulator 2.3: - Major refactoring of the code behind. - Added a current durability and a current CP textbox.DNN CMS Platform: 07.01.02: Major HighlightsAdded the ability to manage the Vanity URL prefix Added the ability to filter members in the member directory by role Fixed issue where the user could inadvertently click the login button multiple times Fixed issues where core classes could not be used in out of process cache provider Fixed issue where profile visibility submenu was not displayed correctly Fixed issue where the member directory was broken when Convert URL to lowercase setting was enabled Fixed issu...New Projects.netProject: .Net Project 3TINafs-m: Secure file storageASP.NET dhtmlxChart Class: Create different types of charts and render them to webforms.ASP.NET dhtmxGantt Class: Add tasks Add dependencies Use lighboxBestCodeTrainer: Project BestCode is for Training. Black Dragon Online Shop: An online shop with basic functionalities implemented with ASP.NET MVC as a team project in Telerik Academy 2012/2013.Central fovea -X: ????: 1.???????????Cell,??RGB,HSL,X,Y 2.???????? 3.???????????? 4.????????，???????? 5.????????CorvusSKK: SKK-like Japanese Input Method for Windowsdaneshjoo: ?? ??? ???????DBA Toolbox: A tool for the production DBA. A place to store all those scripts, tools, references and queries that make your job as a DBA easier.Devpad IDE: Basic integrated development environment.DXUT for Direct3D 11: Latest version of the Microsoft DXUT framework for Direct3D 11 Win32 desktop applications formerly in the now legacy DirectX SDK.Dynamics CRM Messaging Integration: This project shows how to implement a simple custom messaging solution using Microsoft Dynamics CRM and based on its standard development components.Kockafölde: Kliens program.Medusa's Ebay: Teamwork assignment @ TelerikAcademy 2012/2013. Project is for creating simple (or more complicated) interneTeamwork assignment @ TelerikAcademy 2012/2013.Nauplius.PAS: Nauplius.PAS allows end users to leverage the PowerPoint Conversion Services within SharePoint 2013 to convert PowerPoint documents from one format to another.PayBox payment gateway provider for NB_Store: PayBox payment provider for NB_StorePet passport: This is a teamwork projectProject Euler solutions: Solutions to the ProjectEuler problemsRoboSubSync: Fixes an unsynchronized subtitle in any language according to an already synced subtitle in english, with the help of some advanced algorithm magic... ShopBook: Shopbooksliders: jQuery slidersSQLite to JSON: A simple program to convert SQLite data to JSON.Super64: This is a Commodore 64 emulator that is determined to have extremely unnecessary accuracy.TeamProject1: This is just Demo ProjectXnaHelper: A collection of tools for making 2D XNA Games

  Read the article

• 401 Using Multiple Authentication methods IE 10 only

  - by jon3laze

  I am not sure if this is more of a coding issue or server setup issue so I've posted it on stackoverflow and here... On our production site we've run into an issue that is specific to Internet Explorer 10. I am using jQuery doing an ajax POST to a web service on the same domain and in IE10 I am getting a 401 response, IE9 works perfectly fine. I should mention that we have mirrored code in another area of our site and it works perfectly fine in IE10. The only difference between the two areas is that one is under a subdomain and the other is at the root level. www.my1stdomain.com vs. portal.my2nddomain.com The directory structure on the server for these are: \my1stdomain\webservice\name\service.aspx \portal\webservice\name\service.aspx Inside of the \portal\ and \my1stdomain\ folders I have a page that does an ajax call, both pages are identical. $.ajax({ type: 'POST', url: '/webservice/name/service.aspx/function', cache: false, contentType: 'application/json; charset=utf-8', dataType: 'json', data: '{ "json": "data" }', success: function() { }, error: function() { } }); I've verified permissions are the same on both folders on the server side. I've applied a workaround fix of placing the <meta http-equiv="X-UA-Compatible" value="IE=9"> to force compatibility view (putting IE into compatibility mode fixes the issue). This seems to be working in IE10 on Windows 7, however IE 10 on Windows 8 still sees the same issue. These pages are classic asp with the headers that are being included, also there are no other meta tags being used. The doctype is being specified as <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//" "http://www.w3.org/TR/html4/loose.dtd"> on the portal page and <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> on the main domain. UPDATE1 I used Microsoft Network Monitor 3.4 on the server to capture the request. I used the following filter to capture the 401: Property.HttpStatusCode.StringToNumber == 401 This was the response - Http: Response, HTTP/1.1, Status: Unauthorized, URL: /webservice/name/service.aspx/function Using Multiple Authetication Methods, see frame details ProtocolVersion: HTTP/1.1 StatusCode: 401, Unauthorized Reason: Unauthorized - ContentType: application/json; charset=utf-8 - MediaType: application/json; charset=utf-8 MainType: application/json charset: utf-8 Server: Microsoft-IIS/7.0 jsonerror: true - WWWAuthenticate: Negotiate - Authenticate: Negotiate WhiteSpace: AuthenticateData: Negotiate - WWWAuthenticate: NTLM - Authenticate: NTLM WhiteSpace: AuthenticateData: NTLM XPoweredBy: ASP.NET Date: Mon, 04 Mar 2013 21:13:39 GMT ContentLength: 105 HeaderEnd: CRLF - payload: HttpContentType = application/json; charset=utf-8 HTTPPayloadLine: {"Message":"Authentication failed.","StackTrace":null,"ExceptionType":"System.InvalidOperationException"} The thing here that really stands out is Unauthorized, URL: /webservice/name/service.aspx/function Using Multiple Authentication Methods With this I'm still confused as to why this only happens in IE10 if it's a permission/authentication issue. What was added to 10, or where should I be looking for the root cause of this? UPDATE2 Here are the headers from the client machine from fiddler (server information removed): Main SESSION STATE: Done. Request Entity Size: 64 bytes. Response Entity Size: 9 bytes. == FLAGS ================== BitFlags: [ServerPipeReused] 0x10 X-EGRESSPORT: 44537 X-RESPONSEBODYTRANSFERLENGTH: 9 X-CLIENTPORT: 44770 UI-COLOR: Green X-CLIENTIP: 127.0.0.1 UI-OLDCOLOR: WindowText UI-BOLD: user-marked X-SERVERSOCKET: REUSE ServerPipe#46 X-HOSTIP: ***.***.***.*** X-PROCESSINFO: iexplore:2644 == TIMING INFO ============ ClientConnected: 14:43:08.488 ClientBeginRequest: 14:43:08.488 GotRequestHeaders: 14:43:08.488 ClientDoneRequest: 14:43:08.488 Determine Gateway: 0ms DNS Lookup: 0ms TCP/IP Connect: 0ms HTTPS Handshake: 0ms ServerConnected: 14:40:28.943 FiddlerBeginRequest: 14:43:08.488 ServerGotRequest: 14:43:08.488 ServerBeginResponse: 14:43:08.592 GotResponseHeaders: 14:43:08.592 ServerDoneResponse: 14:43:08.592 ClientBeginResponse: 14:43:08.592 ClientDoneResponse: 14:43:08.592 Overall Elapsed: 0:00:00.104 The response was buffered before delivery to the client. == WININET CACHE INFO ============ This URL is not present in the WinINET cache. [Code: 2] Portal SESSION STATE: Done. Request Entity Size: 64 bytes. Response Entity Size: 105 bytes. == FLAGS ================== BitFlags: [ClientPipeReused, ServerPipeReused] 0x18 X-EGRESSPORT: 44444 X-RESPONSEBODYTRANSFERLENGTH: 105 X-CLIENTPORT: 44439 X-CLIENTIP: 127.0.0.1 X-SERVERSOCKET: REUSE ServerPipe#7 X-HOSTIP: ***.***.***.*** X-PROCESSINFO: iexplore:7132 == TIMING INFO ============ ClientConnected: 14:37:59.651 ClientBeginRequest: 14:38:01.397 GotRequestHeaders: 14:38:01.397 ClientDoneRequest: 14:38:01.397 Determine Gateway: 0ms DNS Lookup: 0ms TCP/IP Connect: 0ms HTTPS Handshake: 0ms ServerConnected: 14:37:57.880 FiddlerBeginRequest: 14:38:01.397 ServerGotRequest: 14:38:01.397 ServerBeginResponse: 14:38:01.464 GotResponseHeaders: 14:38:01.464 ServerDoneResponse: 14:38:01.464 ClientBeginResponse: 14:38:01.464 ClientDoneResponse: 14:38:01.464 Overall Elapsed: 0:00:00.067 The response was buffered before delivery to the client. == WININET CACHE INFO ============ This URL is not present in the WinINET cache. [Code: 2]

  Read the article

• CodePlex Daily Summary for Wednesday, October 10, 2012

  CodePlex Daily Summary for Wednesday, October 10, 2012Popular ReleasesA C# 4.0 Push Notification Helper Library for WP7.0 & WP7.1: Easy Notification 1.0.0: New Feature - Send Tile, Toast & Raw Notifications to Windows Phone Devices. New Feature - Supports Windows Phone 7.0 & Windows Phone 7.1. New Feature - Validation rules are in-built for Push Notification Messages. New Feature - Strongly typed interfaces. New Feature - Supports synchronous & asynchronous methods to send notifications. New Feature - Supports authenticated notifications using X509 Certificates. New Feature - Supports Callback Registration Requests. New Feature - S...D3 Loot Tracker: 1.5.4: Fixed a bug where the server ip was not logged properly in the stats file.Captcha MVC: Captcha Mvc 2.1.2: v 2.1.2: Fixed problem with serialization. Made all classes from a namespace Jetbrains.Annotaions as the internal. Added autocomplete attribute and autocorrect attribute for captcha input element. Minor changes. v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial captcha. Now you can easily customize the layout, s...DotNetNuke® Community Edition CMS: 06.02.04: Major Highlights Fixed issue where the module printing function was only visible to administrators Fixed issue where pane level skinning was being assigned to a default container for any content pane Fixed issue when using password aging and FB / Google authentication Fixed issue that was causing the DateEditControl to not load the assigned value Fixed issue that stopped additional profile properties to be displayed in the member directory after modifying the template Fixed er...Online Image Editor: Online Image Editor v1.1: If you have problems with this tool, please email me at amisouvikdas@gmail.com or You can also participate this project to improve this.Advanced DataGridView with Excel-like auto filter: 1.0.0.0: ?????? ??????Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.69: Fix for issue #18766: build task should not build the output if it's newer than all the input files. Fix for Issue #18764: build taks -res switch not working. update build task to concatenate input source and then minify, rather than minify and then concatenate. include resource string-replacement root name in the assumed globals list. Stop replacing new Date().getTime() with +new Date -- the latter is smaller, but turns out it executes up to 45% slower. add CSS support for single-...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes NOTE:...DevLib: 69721 binary dll: 69721 binary dllVidCoder: 1.4.4 Beta: Fixed inability to create new presets with "Save As".MCEBuddy 2.x: MCEBuddy 2.3.2: Changelog for 2.3.2 (32bit and 64bit) 1. Added support for generating XBMC XML NFO files for files in the conversion queue (store it along with the source video with source video name.nfo). Right click on the file in queue and select generate XML 2. UI bugifx, start and end trim box locations interchanged 3. Added support for removing commercials from non DVRMS/WTV files (MP4, AVI etc) 4. Now checking for Firewall port status before enabling (might help with some firewall problems) 5. User In...DotNetNuke Boards: 01.00.00: This beta release represents the end of training session 1, based on jQuery and Knockout integration in DotNetNuke 6.2.3. It is designed to allow a single user or multiple users to add/edit/delete cards but no cards can be assigned to anyone at this point. This release is not intended for production use!Sandcastle Help File Builder: SHFB v1.9.5.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release suppor...ClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Json.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.JSLint for Visual Studio 2010: 1.4.2: 1.4.2patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y....NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...New Projectsadcc2: adccAP.Framework: This a asp.net mvc3 of test web site .EFCodeFirst: Projeto criado para experimentos e estudos com o Entity FrameworkEXPS-RAT: HelloFiskalizacija za developere: Projekt je namijenjen razvojnim inženjerima, programerima, developerima i svima ostalima koji se bave razvojem programskih rješenja za fiskalne blagajne.Galleriffic App for SharePoint 2013: Galleriffic App is an app part for SharePoint 2013 to display a picture gallery with cool JQuery animations and effects. Hack.net: Hack.net is a Roguelike clone similar to NetHack or Roguelike.Inno Setup For .NET Application: This is a simple inno setup for .net developerJava Special Functions Library: Java Special Functions Library implemented as a public class part of my larger mathematical package.LocalFileOpener: The LocalFileOpener plugin opens an intent to help you easily open local files on the device under installed applications.localizr - .NET Collaborative Translation & Localization: Localizr is a platform for collaborative localization and translation of .NET projects.Metro UI CSS: Metro UI CSS a set of styles to create a site with an interface similar to Windows 8 Metro UI. MoskieDotNet: A sandbox for me learn some new technologies.Mouse Automation: Allows a user to automate repetitive clicking within EverQuestMS SQL DB Schema Updater: Simple tool for updating MS SQL database schema based on "ideal" database model.n8design Tools: Tools any Source Code by Stefan Bauer.NasosCS: ???? ?? ??????Pokemonochan: ALright this is a Pokemon MMo bound to come out someday!PotatoSoft: ?????????????!Power Mirrors: Leverage the usefulness of SQL Server mirrors using PowerShell and SMO. Create mirrors from scratch, assign witnesses and test failovers, all from PowerShell! Project13251010: sdfdReal Time Data Bus: A collection of real time data bus implementations.Ricky Tailor's ASP.NET Web 2.0 Project: 7COM0203 Web Scripting And Content Creation Task 1. SampleTFS2: Sample Projectslotcarduino - An Arduino based slotcar timing project: Slotcar timing project based on Arduino Uno/Mega 2560. Standalone system with serial enabled graphic display.System.Data.Entity.Repository: Entity framework code first framework wrapper with support for generic repository pattern, N-Tier application and Transaction Management for rapid developmentTest Marron: This project is a test to explore codeplexTmib Video Downloader: A small youtube video downloader. Created in C#Web Scripting & Content Creation: Fhame Rashid MSc Software Engineering Module Log: Web-Scripting and Content Creationwebbase: webbaseWebScriptingandContentCreation: This project is for the MSc module Web Scripting and Content Creation.Zuordnung: Zuordnung

  Read the article

• Windows Azure Myths

  - by BuckWoody

  Windows Azure is part of the Microsoft "stack" - the suite of software and services we offer. Because we have so many products in almost every part of technology, it's hard to know everything about all parts of what we do - even for those of us who work here. So it's no surprise that some folks are not as familiar with Windows and SQL Azure as they are, say Windows Server or XBox. As I chat with folks about a solution for a business or organization need, I put Windows Azure into the mix. I always start off with "What do you already know about Windows Azure?" so that I don't bore folks with information they already have. I some cases they've checked out the product ahead of time and have specific questions, in others they aren't as familiar, and in still others there is a fair amount of mis-information. Sometimes that's because of a marketing failure, sometimes it's hearsay, and somtetimes it's active misinformation. I thought I might lay out a few of these misconceptions. As always - do your fact-checking! Never take anyone's word alone (including mine) as gospel. Make sure you educate yourself on your options. Your company or your clients depend on you to have the right information on IT, so make sure you live up to that. Myth 1: Nobody uses Windows Azure It's true that we don't give out numbers on the amount of clients on Windows and SQL Azure. But lots of folks are here - companies you may have heard of like Boeing, NASA, Fujitsu, The City of London, Nuedesic, and many others. I deal with firms small and large that use Windows Azure for mission-critical applications, sometimes totally on Windows and/or SQL Azure, sometimes in conjunction with an on-premises system, sometimes for only a specific component in Windows Azure like storage. The interesting thing is that many sites you visit have a Windows Azure component, or are running on Windows Azure. They just don't announce it. Just like the other cloud providers, the companies have asked to be completely branded themselves - they don't want you to be aware or care that they are on Windows Azure. Sometimes that's for security, other times it's for different reasons. It's just like the web sites you visit. For the most part, they don't advertise which OS or Web Server they use. It really just shouldn't matter. The point is that they just use what works to solve a given problem. Check out a few public case studies here: https://www.windowsazure.com/en-us/home/case-studies/ Myth 2: It's only for Microsoft stuff - can't use Open Source This is the one I face the most, and am the most dismayed by. We work just fine with many open source products, including Java, NodeJS, PHP, Ruby, Python, Hadoop, and many other languages and applications. You can quickly deploy a Wordpress, Umbraco and other "kits". We have software development kits (SDK's) for iPhones, iPads, Android, Windows phones and more. We have an SDK to work with FaceBook and other social networks. In short, we play well with others. More on the languages and runtimes we support here: https://www.windowsazure.com/en-us/develop/overview/ More on the SDK's here: http://www.wadewegner.com/2011/05/windows-azure-toolkit-for-ios/, http://www.wadewegner.com/2011/08/windows-azure-toolkits-for-devices-now-with-android/, http://azuretoolkit.codeplex.com/ Myth 3: Microsoft expects me to switch everything to "the cloud" No, we don't. That would be disasterous, unless the only things you run in your company uses works perfectly in Azure. Use Windows Azure  - or any cloud for that matter - where it works. Whenever I talk to companies, I focus on two things: Something that is broken and needs to be re-architected Something you want to do that is new If something is broken, and you need new tools to scale, extend, add capacity dynamically and so on, then you can consider using Windows or SQL Azure. It can help solve problems that you have, or it may include a component you don't want to write or architect yourself. Sometimes you want to do something new, like extend your company's offerings to mobile phones, to the web, or to a social network. More info on where it works here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx Myth 4: I have to write code to use Windows and SQL Azure If Windows Azure is a PaaS - a Platform as a Service - then don't you have to write code to use it? Nope. Windows and SQL Azure are made up of various components. Some of those components allow you to write and deploy code (like Compute) and others don't. We have lots of customers using Windows Azure storage as a backup, to securely share files instead of using DropBox, to distribute videos or code or firmware, and more. Others use our High Performance Computing (HPC) offering to rent a supercomputer when they need one. You can even throw workloads at that using Excel! In addition there are lots of other components in Windows Azure you can use, from the Windows Azure Media Services to others. More here: https://www.windowsazure.com/en-us/home/scenarios/saas/ Myth 5: Windows Azure is just another form of "vendor lock-in" Windows Azure uses .NET, OSS languages and standard interfaces for the code. Sure, you're not going to take the code line-for-line and run it on a mainframe, but it's standard code that you write, and can port to something else. And the data is yours - you can bring it back whever you want. It's either in text or binary form, that you have complete control over. There are no licenses - you can "pay as you go", and when you're done, you can leave the service and take all your code, data and IP with you.   So go out there, read up, try it. Use it where it works. And don't believe everything you hear - sometimes the Internet doesn't get it all correct. :)

  Read the article

• Why might login failures cause SQL 2005 to dump and ditch?

  - by Byron Sommardahl

  Our SQL 2005 server began timing out and finally stopped responding on Oct 26th. The application logs showed a ton of 17883 events leading up to a reboot. After the reboot everything was fine but we were still scratching our heads. Fast forward 6 days... it happened again. Then again 2 days later. The last night. Today it has happened three times to far. The timeline is fairly predictable when it happens: Trans log backups. Login failure for "user2". Minidump Another minidump for the scheduler Repeated 17883 events. Server fails little by little until it won't accept any requests. Reboot is all that gets us going again (a band-aid) Interesting, though, is that the server box itself doesn't seem to have any problems. CPU usage is normal. Network connectivity is fine. We can remote in and look at logs. Management studio does eventually bog down, though. Today, for the first time, we tried stopping services instead of a reboot. All services stopped on their own except for the SQL Server service. We finally did an "end task" on that one and were able to bring everything back up. It worked fine for about 30 minutes until we started seeing timeouts and 17883's again. This time, probably because we didn't reboot all the way, we saw a bunch of 844 events mixed in with the 17883's. Our entire tech team here is scratching heads... some ideas we're kicking around: MS Cumulative Update hit around the same time as when we first had a problem. Since then, we've rolled it back. Maybe it didn't rollback all the way. The situation looks and feels like an unhandled "stack overflow" (no relation) in that it starts small and compounds over time. Problem with this is that there isn't significant CPU usage. At any rate, we're not ruling SQL 2005 bug out at all. Maybe we added one too many import processes and have reached our limit on this box. (hard to believe). Looking at SQLDUMP0151.log at the time of one of the crashes. There are some "login failures" and then there are two stack dumps. 1st a normal stack dump, 2nd for a scheduler dump. Here's a snippet: (sorry for the lack of line breaks) 2009-11-10 11:59:14.95 spid63 Using 'xpsqlbot.dll' version '2005.90.3042' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required. 2009-11-10 11:59:15.09 spid63 Using 'xplog70.dll' version '2005.90.3042' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required. 2009-11-10 12:02:33.24 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:02:33.24 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:08:21.12 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:08:21.12 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:13:49.38 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:13:49.38 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:15:16.88 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:15:16.88 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:18:24.41 Logon Error: 18456, Severity: 14, State: 16. 2009-11-10 12:18:24.41 Logon Login failed for user 'standard_user2'. [CLIENT: 50.36.172.101] 2009-11-10 12:18:38.88 spid111 Using 'dbghelp.dll' version '4.0.5' 2009-11-10 12:18:39.02 spid111 *Stack Dump being sent to C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\SQLDump0149.txt 2009-11-10 12:18:39.02 spid111 SqlDumpExceptionHandler: Process 111 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process. 2009-11-10 12:18:39.02 spid111 * ***************************************************************************** 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * BEGIN STACK DUMP: 2009-11-10 12:18:39.02 spid111 * 11/10/09 12:18:39 spid 111 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * Exception Address = 0159D56F Module(sqlservr+0059D56F) 2009-11-10 12:18:39.02 spid111 * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION 2009-11-10 12:18:39.02 spid111 * Access Violation occurred writing address 00000000 2009-11-10 12:18:39.02 spid111 * Input Buffer 138 bytes - 2009-11-10 12:18:39.02 spid111 * " N R S C _ P T A 22 00 4e 00 52 00 53 00 43 00 5f 00 50 00 54 00 41 00 2009-11-10 12:18:39.02 spid111 * C _ Q A . d b o . 43 00 5f 00 51 00 41 00 2e 00 64 00 62 00 6f 00 2e 00 2009-11-10 12:18:39.02 spid111 * U s p S e l N e x 55 00 73 00 70 00 53 00 65 00 6c 00 4e 00 65 00 78 00 2009-11-10 12:18:39.02 spid111 * t A c c o u n t 74 00 41 00 63 00 63 00 6f 00 75 00 6e 00 74 00 00 00 2009-11-10 12:18:39.02 spid111 * @ i n t F o r m I 0a 40 00 69 00 6e 00 74 00 46 00 6f 00 72 00 6d 00 49 2009-11-10 12:18:39.02 spid111 * D & 8 @ t x 00 44 00 00 26 04 04 38 00 00 00 09 40 00 74 00 78 00 2009-11-10 12:18:39.02 spid111 * t A l i a s § 74 00 41 00 6c 00 69 00 61 00 73 00 00 a7 0f 00 09 04 2009-11-10 12:18:39.02 spid111 * Ð GQE9732 d0 00 00 07 00 47 51 45 39 37 33 32 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * 2009-11-10 12:18:39.02 spid111 * MODULE BASE END SIZE 2009-11-10 12:18:39.02 spid111 * sqlservr 01000000 02C09FFF 01c0a000 2009-11-10 12:18:39.02 spid111 * ntdll 7C800000 7C8C1FFF 000c2000 2009-11-10 12:18:39.02 spid111 * kernel32 77E40000 77F41FFF 00102000

  Read the article

• CodePlex Daily Summary for Wednesday, June 16, 2010

  CodePlex Daily Summary for Wednesday, June 16, 2010New ProjectsAtomFeedBuilder: Simple and lightweight Atom feed builder. Developed in VB.Net.Cable and Wire harness tester: If you build lots of cable/wire harness' you know that testing them is a pain. I have wanted an automated cable tester for a while now but commerci...Carmenta Engine Power Pack: The target of Carmenta Engine Power Pack is to provide extensions, utilities and wrapper classes that allows developers to work more efficiently w...Customer Book: Customer Book, its like address book with facility for generating quotation for a business or a supplier to the clients.Dialector: Using this program, you can convert pure Turkish texts into different dialects; such as: Emmi, Kufurbaz, Kusdili, Laz, Peltek, Tiki, and many more....Downline Commision Generator: Analyze the compensations plan of the organizations in multi-level marketing or network marketing. Check with this tool the commision plan of the c...EmbeddedSpark 2010 Project M: Project M is a system for seamlessly interfacing a tabletop interface to portable devices placed upon it. Using image recognition and projectors, P...Event Log Creator by eVestment Alliance: Provides a simple utility to create a new source and log in the Windows event log. The utility checks if the current user is an administrator, and...ExchangeHog: Desktop/daemon application that aggregates emails from multiple pop3-accounts into single Microsoft Exchange 2010 account. For users receiving ema...Extra Time Calculator: Extra Time Calculator allows exam end times to be easily calculated for students receiving an extra time accommodation.Generic WCF Hosting Service: The Generic Host Service provides a simple, reusable, and reliable mechanism for hosting WCF services. Google Storage for .NET: Google Storage for .NET (GSN) is an open source library that provides .NET developers with easy access to the Google Storage API. The library allo...Helium: The Helium XNA game engine is a light portable game engine designed to work on many platforms and soon to be expanded on more. Currently the helium...IconizedButton Control Set: ASP.NET WebForms IconizedButton Custom Control Set. Replaces the dull Button/LinkButton/HyperLink controls with styling and left and right aligned...Jedi Council PM List: Allows for users to process Private Message Lists on the Jedi Council forums for TheForce.Net.JetPumpDesign: 本软件为蒸气喷射泵设计计算软件 作者：申阳 单位：西安交通大学过程装备与控制工程61班log4Nez: An high personalized implementation of a logging libraryMutantFramework: Provides a common set of building blocks for building enterprise applicationsNUnit Add-in for Growl Notifications: NUnit add-in which allows to send notifications to Growl when test run is started or finished, when a first test failure occurs and so on.Object Reports: Object Reports is a "proof of concept" application which provides users the ability to visualy build queries based on data stored in the relational...openTrionyx: openTrionyx is a set of tools to make easier web application development. Includes Data, Web and plain text documents tools. Developed in C#, compl...Partial Rendering control for MVC 2: This project shows a web custom control that allow to have partial rendering using async post-back (through JQuery) in a MVC 2 web application.PowerGUI Visual Studio Extension: The PowerGUI Visual Studio Extension exposes PowerGUI as an editor in Visual Studio. PowerShell developers can now write scripts directly in Visual...PowerShell Script Provider: Write your own PowerShell provider using only script, no C# required. Module definition is provided by a Windows PowerShell 2.0 Module, which may b...Scholar: Scholar is a solution/framework for .Net developers to help with the creation of distributed data processing (think SETI@home style apps). It is in...scrabb: Scrabb help people play scrabble over net.SharePointNuke: A DotNetNuke module that connects to a SharePoint server using web services API and displays the content of a specified list. SolidWorksBackConverter: a Project to Convert a solidwork file to an older version Soma - Sql Oriented MApping framework: Sql Oriented MApping framework.SPCreate: SPCreate auto store procedure creator. It's developed in c#. SpCreate as output ADO.NET Class (C# or VB.Net) and SQL Server or MS Access Store pro...std::streambuf wrapper for COM IStream: This provides a subclass of std::streambuf that wraps a COM IStream, so you can use an IStream with any C++ code that uses iostreams or the STL alg...VACID solutions: Solutions of verification problems posed in paper "Verification of Ample Correctness of Invariants of Data-structures". Developed with various tool...Viewer: Our Goal is to create a C# project that will centeralize Image and Movie Viewing in a forms application, It will also have a Specialized Webbrowser...vsXPathTester: vsXPathTester is a utility for Developer. This help them load XML file and the run their XPath Query. The Resultant is shown in window. It save the...New Releases.Net Max Framework: Version 1.0.0: Version 1.0.0 - EstableAndrew's XNA Helpers: V1.2: Features upgraded features based off of the V1.1 code for both X86 and XBOX Additions/Changes Reworked the Texture2D and Rectangle extender namesp...BaseCalendar: BaseControls 1.2: BaseControls 1.2 contains the BaseCalendar ASP.NET control. Changes: 1.2 Exposed EffectiveVisibleDate and FirstVisibleDay methods 1.1 Rendering ...Customer Book: Customer Book Code: Bronze Release PostgreSQL database dump for Customer Book. Open PgAdmin III and restore the database dump into your server. Notice User Name for t...Data Connection Suite: Data Connections Suite v1.0.0.0: This is the first release of this incomplete component, but good enought to use in a production environment (it's what we do).DigitArchive: Build 8: Now the software works on .NET 3.5 and above. So if you have Windows 7 it installs without any pre-requisites. Changes: -Works on .NET 3.5 -Now t...Doom 64 Ex (SVN Builds): Doom 64 Ex r-738: Finally a new build after so many months. There are way to many updates to even begin to write about here just download and frag away. There is a s...DotNetNuke® Media: 03.03.00a: This release is Beta!! There is no guaranteed upgrade path to the 03.03.00 release version! Please use this to help us and test what we have. Repor...Downline Commision Generator: Downline Commision Generator: Downline Commision GeneratorElmah2 : An extensable error logger for ASP.net: 1.0 Beta 1: This is a beta release be sure to report any errors etc. Be sure to check out the documentation tab on information on how to install and configure...EPiServer Template Foundation: First compiled release: First compiled release for experimenting only! :) An introductory post will be published shortly on the blog.Helium: Initial Release: This is the initial release of the Helium Engine. Please check out the documentation link for information on how to use the engine. To see a ful...IconizedButton Control Set: IconizedButton Control Set: Taking a line from Google's play book - marking everything as Beta. Seriously, I'd like to hear some feedback before moving the Development Status...JetPumpDesign: JetPumpDesign 1.0: 当前的软件可以设计5级以内的蒸汽喷射泵。Microsoft Silverlight Analytics Framework: Version 1.4.4 Installer: Tools TargetingVisual Studio 2010 Expression Blend 4 (part of Expression Studio 4) Analytics Services Included Vendor Behavior Silverlight 3...NHibernate Sidekick Library: 0.7.0: Added a few methods for use with the NHibernate 2nd level cache (EvictAllObjectsFromCache and EvictPersistentClass). I also added the boolean optio...NHibernate Sidekick Library: 0.7.5: Fix for http://nhprof.com/Learn/Alerts/DoNotUseImplicitTransactionsNito.KitchenSink: Version 9: Dependencies Nito.Linq 0.6 Beta (released 2010-06-14) Rx 1.0.2563.0 (released 2010-06-09) Supported Platforms .NET 4.0 Client Profile, with Rx. ...NQueue: Version 1.0.0.0: Version 1.0.0.0NUnit Add-in for Growl Notifications: NUnit Add-in for Growl Notifications 1.0 build 0: The very first stable releasePartial Rendering control for MVC 2: Partial Rendering control for MVC 2: Here there is the source code and a MVC 2 web site as testPowerShell Script Provider: PSProvider 0.1: Requires PowerShell 2.0 RTM The functions in the attached ps1 script are the bare minimum for a working container-style provider (no subfolders.) ...Quick Performance Monitor: Version 1.4.3: Fixed issue where if an instance name contains backslash characters (\) the program would not load the performance counter properly. Also added sta...SharePointNuke: SharePointNuke 2.00.08: SharePointNuke 2.00.08 - Binary DotNetNuke 5.x module.Skype Voice Changer: 1.0 Updated Sample Code: This updated release is the accompanying code for the Skype Voice Changer article on Coding4Fun. Changes in this release: Added support for PreEmp...std::streambuf wrapper for COM IStream: Beta release (tested in a commercial project): This code has been tested in a custom Windows Search filter and property handler I wrote for a proprietary binary format. There may be some bugs, b...Sunlit World Scheme: Sunlit World Scheme - 20100615 - source and binary: This is the result of building the current source code in Debug mode. The source code is included. The binaries are in the SchemeCode folder along...Timo-Design / 40FINGERS DotNetNuke® Skinning Extensions: Style Helper Skin Object Beta: The 40FINGERS Style Helper Skin object allows you to add CSS and Javascript links and meta tags to the head of your page. It can also remove CSS l...Umbraco CMS: Umbraco 4.1 RC: This is the final test version of Umbraco 4.1 before the final release. PLEASE BE AWARE THAT UMBRACO 4.1 RC IS A .NET 4.0 RELEASE AND WON'T WORK O...VCC: Latest build, v2.1.30615.0: Automatic drop of latest buildWCF 4 Templates for Visual Studio 2010: UserNameForCertificate Template: Produces a WCF service application supporting username and password authentication, relying on message security to protect messages en route. Suppl...WCF 4 Templates for Visual Studio 2010: UserNameOverHttps Template: Produces a WCF service application supporting username and password authentication over HTTPS/SSL, relying on transport security to protect message...xUnit.net Contrib: xunitcontrib 0.4.1 alpha (ReSharper 5.1.1709 only): xunitcontrib release 0.4.1 (ReSharper runner) This release targets the current nightly build of ReSharper 5.1's Early Access Programme (build 1709)...Most Popular ProjectsCommunity Forums NNTP bridgeRIA Services EssentialsNeatUploadBxf (Basic XAML Framework).NET Transactional File ManagerSOLID by exampleSSIS Expression Editor & TesterWEI ShareChirpy - VS Add In For Handling Js, Css, and DotLess FilesASP.NET MVC Time PlannerMost Active ProjectsdotSpatialRhyduino - Arduino and Managed CodeCassandraemonpatterns & practices – Enterprise LibraryCommunity Forums NNTP bridgeLightweight Fluent Workflowpatterns & practices: Enterprise Library ContribNB_Store - Free DotNetNuke Ecommerce Catalog ModuleBlogEngine.NETjQuery Library for SharePoint Web Services

  Read the article

• CodePlex Daily Summary for Sunday, July 01, 2012

  CodePlex Daily Summary for Sunday, July 01, 2012Popular ReleasesEnterprise Library 5 Caching with ProtoBuf.NET: Initial Release: This is the initial version, which includes zipped up sourcecode????: ????2.0.3: 1、???????????。 2、????????。 3、????????????。 4、bug??，????。Apworks: Apworks (v2.5.4563.21309, 30JUN2012): Installation Prerequisites: 1. Microsoft .NET Framework 4.0 SP1 2. Microsoft Visual Studio 2010 SP1 3. Other required libraries & assemblies are now included in the installation package so no more prerequisites needed Functional Updates: 1. Refactor the identity field of the IEntity interface from 'Id' to 'ID' 2. Changed the MySql Storage to use the MySql NetConnector version 6.4.4. 3. Implemented the paging support for the repositories. 4. Added the Eager Loading Property specification t...Turing Machine Simulator in C#: TuringMachineSimulator 1.0 Setup: Initial release.RESTester: First version: First beta release that contain following features: - specify http method - specify content type - specify url - specify custom headers - make request - see request result in plain text, XML, JSON, WEB form - save request to DB - load request from DB - delete request from DBScreen Mate: ScreenMate17551.7z: ScreenMate17551.7z - Full Source StarTrek.exe - Just the exe for USSExcelsiorNCC-2000myManga: myManga v1.0.0.6: ChangeLogUpdating from Previous Version: Extract contents of Release - myManga v1.0.0.5.zip to previous version's folder. Replaces: myManga.exe BakaBox.dll CoreMangaClasses.dll Manga.dll Plugins/MangaReader.manga.dll Plugins/MangaFox.manga.dll Plugins/MangaHere.manga.dll Plugins/MangaPanda.manga.dllMagelia WebStore Open-source Ecommerce software: Magelia WebStore 2.0: User Right Licensing ContentType version 2.0.267.1Supporting Guidance and Whitepapers: v1 - Supporting Media: Welcome to the Release Candidate (RC) release of the ALM Rangers Readiness supporting edia As this is a RC release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these RC artifacts in a production environment. Quality-Bar Details All critical bugs have been resolved Known Issues / Bugs Practical Ruck training workshop not yet includedDesigning Windows 8 Applications with C# and XAML: Chapters 1 - 7 Release Preview: Source code for all examples from Chapters 1 - 7 for the Release PreviewMicrosoft Ajax Minifier: Microsoft Ajax Minifier 4.57: Fix for issue #18284: evaluating literal expressions in the pattern c1 * (x / c2) where c1/c2 is an integer value (as opposed to c2/c1 being the integer) caused the expression to be destroyed.Visual Studio ALM Quick Reference Guidance: v2 - Visual Studio 2010 (Japanese): Rex Tang (?? ??) http://blogs.msdn.com/b/willy-peter_schaub/archive/2011/12/08/introducing-the-visual-studio-alm-rangers-rex-tang.aspx, Takaho Yamaguchi (?? ??), Masashi Fujiwara (?? ??), localized and reviewed the Quick Reference Guidance for the Japanese communities, based on http://vsarquickguide.codeplex.com/releases/view/52402. The Japanese guidance is available in AllGuides and Everything packages. The AllGuides package contains guidances in PDF file format, while the Everything packag...Visual Studio Team Foundation Server Branching and Merging Guide: v1 - Visual Studio 2010 (Japanese): Rex Tang (?? ??) http://blogs.msdn.com/b/willy-peter_schaub/archive/2011/12/08/introducing-the-visual-studio-alm-rangers-rex-tang.aspx, Takaho Yamaguchi (?? ??), Hirokazu Higashino (?? ??), localized and reviewed the Branching Guidance for the Japanese communities, based on http://vsarbranchingguide.codeplex.com/releases/view/38849. The Japanese guidance is available in AllGuides and Everything packages. The AllGuides package contains guidances in PDF file format, while the Everything packag...SQL Server FineBuild: Version 3.1.0: Top SQL Server FineBuild Version 3.1.0This is the stable version of FineBuild for SQL Server 2012, 2008 R2, 2008 and 2005 Documentation FineBuild Wiki containing details of the FineBuild process Known Issues Limitations with this release FineBuild V3.1.0 Release Contents List of changes included in this release Please DonateFineBuild is free, but please donate what you think FineBuild is worth as everything goes to charity. Tearfund is one of the UK's leading relief and de...EasySL: RapidSL V2: Rewrite RapidSL UI Framework, Using Silverlight 5.0 EF4.1 Code First Ria Service SP2 + Lastest Silverlight Toolkit.SOLID by example: All examples: All solid examplesSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.1726.406): Use of new version of connection controls for a full support of OSDP authentication mechanism for CRM Online.Umbraco CMS: Umbraco CMS 5.2: Development on Umbraco v5 discontinued After much discussion and consultation with leaders from the Umbraco community it was decided that work on the v5 branch would be discontinued with efforts being refocused on the stable and feature rich v4 branch. For full details as to why this decision was made please watch the CodeGarden 12 Keynote. What about all that hard work?!?? We are not binning everything and it does not mean that all work done on 5 is lost! we are taking all of the best and m...CodeGenerate: CodeGenerate Alpha: The Project can auto generate C# code. Include BLL Layer、Domain Layer、IDAL Layer、DAL Layer. Support SqlServer And Oracle This is a alpha program,but which can run and generate code. Generate database table info into MS WordXDA ROM HUB: XDA ROM HUB v0.9: Kernel listing added -- Thanks to iONEx Added scripts installer button. Added "Nandroid On The Go" -- Perform a Nandroid backup without a PC! Added official Android app!New ProjectsAdventureWorks Portal: This project will serve as a demonstration of web-based composite application using HTML 5 (with JSRender), ASP.NET MVC 4, Unity, and Entity Framework.Arkalia Core: Basic vD1.29.1 emulatorBooncraft: This project is a launcher for minecraft that loads and updates the BoonCraft mod pack. See 352n.dyndns.org for more info on BoonCraft.CloudWebSiteDemo: Windows Azure demo codeComputer Mayhem: Computer Mayhem is a growing collection of computer related add-ons for Mayhem.CSharp Extensions: Piccolo insieme di estensioni alla libreria standard di C#D3MediaLib: Diablo 3 Media LibraryEpub Editor: A simple epub editor that allows you to make quick changes to epub source files.IpScanner: The IpScanner windows application should help discovering hosts in a ip based network. The project is written in C#jQuery UI Script# Import Library: This library allows you to develop C# code against the jQueryUI API. This library is a Script# import library with definitions for the jQueryUI v1.8.21 API.Mayhem KeyLogger: The reaction module created allows for a given user to write text to a given file. When enough mappings between Key Press Events and my reaction module, the MayMayhem Keypress Module: The Mayhem Keypress Module was written as a reaction module for the purpose of simulating a keypress. Given an event, a certain key will be pressed in reaction.mIP - A C# Managed TCP/IP Stack for .NET Micro Framework: A fully managed TCP/IP stack for .NET MicroFramework with the primary purpose of enabling web servers. Local Name Resolution for Windows and iOS is automatic!OL 2012 Mayhem: OL 2012 Mayhem is a collection of OL 2012 related add-ons for Mayhem.PHP Code Model: A PHP class library that abstracts PHP language constructs with the goal is to facilitate automated PHP code generationQTalk: QChat, using Gtalk technologyreal date & time for command mode in windows OS: This is a console application to output date and time in specified format in Windows OS both 32 and 64 bits.RESTester: Help to create web requests with all needed customization. Available possibility to save any request to database and in any time recover it.Screen Mate: This project is an open source Visual Studio 2010 C# WinForms screen mate template. As a Star Trek fan (Trekee) my first screen mate will be starships.Sensor Mayhem: Sensor Mayhem is a growing collection of sensor and location related add-ons for Mayhem.SharpTFTP: TFTP server/client lib for .Net/C# (v3.5) implementing RFC1350 The TFTP Protocol (Revision 2), RFC2347 TFTP Option Extension and RFC 2348 TFTP Blocksize Option.Turing Machine Simulator in C#: Turing machine simulator simulates the working of Turing machine. Turing machine is used to study model of computation. Twilio Mayhem: Twilio Mayhem is a growing collection of Twilio related add-ons for Mayhem.Vimeo API for Metro and Windows Runtime: This library helps you to easily access the Vimeo Advanced API from your Metro style applications. It is based on the VimeoDotNet code, and supports Upload API.?????????? ?????: ?????????? ????? ?????????? ? ?????????????? ????????? ??????? ?????????????????? ? ????????? ???????

  Read the article

• CodePlex Daily Summary for Monday, May 24, 2010

  CodePlex Daily Summary for Monday, May 24, 2010New Projects(SocketCoder) Full Silverlight Web Video/Voice Conference: Is an open source project to develop full Silverlight Web Video/Voice Conference System in C# .NETabc123: Prueba Archetype Programming Language: See http://dvanderboom.wordpress.comBusiness Process Automation (BPA): BPA is a project initiative to develop an ERP which will integrate with work flow of an organization. It is build on the concept that all business ...Content Rendering: Content Rendering is a .NET 3.5 string template engine. The program uses reflection, an extensibility API and a template document, which has a cust...DTA Output Renamer: The DTA Output Renamer takes recommendations from the SQL Server Database Tuning Advisor (DTA) and updates the names of the indexes/statistics to b...Flexible Editing Toolkit: The Flexible Editing Toolkit aims to enable users who have coding experience in .Net to write own editors/tools using an easy-to-use framework and ...Fluent NHibernate, MVC 2: Projeto ultra simples desenvolvido em Asp.Net MVC 2 com Fluent NHibernate. Foram utilizadas camadas baseadas no DDD. Sample project to test DDD arc...GravityGame: Proyecto del capítulo del IGDA en el Tec de Monterrey Campus Sonora Norte. El objetivo es la creación de un primer juego para conocer cuales son l...Partner Relationship Management (PRM) Accelerator for Microsoft Dynamics CRM: R2 of the PRM accelerator for Microsoft Dynamics CRM.Posh-Hg: Mercurial integration for Windows PowershellSuiteMap: selfSvenska till Rövarspråket: Översätter svenska till rövarspråketTV4Home: This projects extends MediaPortal TV Server with a solution for MediaCenter clients, a Web-Interface and a WHS Add-In.User Profile WebPart: Use this webpart to display SharePoint User Profile information. VolumeMasterCmd: Command line application that will set the wave volume level. Usage: VolumeMaster | VolumeMaster [0-100] Display or set the wave volume level ...wawa cloud store service: 盖茨描述了云计算和云存储之间的区别。“人们老是会搞混。云存储是把你的文件存储到其他地方，进行备份，这和云计算是不同的。这两者都很了不起，都是很好的技术。” 他表示，“云存储的效能没有折扣，因此富于理性的存储经理将会考虑使用云存储技术。” 相反，他表示云计算则会有一些问题，延迟和带宽都可能会...XNA Collision Detection: A collision library which extracts the triangles from a given model, and tests for collision using multiple methods on all existing triangles. Thi...You Private Social Network: YourPrivateNet is for all people who are unsatisfied with how social networking giants, namely facebook, are dealing with privacy and the users dat...New ReleasesArchetype Programming Language: C Sharp 4.0 Grammar in M: This is a C# 4.0 grammar that I am using to learn about parsers and the process of generating ASTs, in preparation for doing the same for the Arche...CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1.4 and 4.0.1.4 beta3: Binary release includes: .net 3.5sp1 and 4.0 builds of Gui app, Console app, Library assembly and Visual Studio development server replacements f...ClosedXML - The easy way to OpenXML: ClosedXML 0.10: The current build has the following capabilities: Can create new workbooks Add worksheets Access cells using R1C1, A1, and mixed notations. A...CRM Web Service Toolkit: MSCRM4 Web Service Toolkit for JavaScript v2.0: MSCRM Web Service Toolkit for JavaScript v2.0. The release contains: CrmServiceToolkit.js (The uncompressed code) CrmServiceToolkit.min.js (The ...DBFramework: Kenly.DBFramework4.6.5.2: Kenly.DBFramework4.6.5.2eComic: eComic 2010.0.0.1: With the release of .NET 4.0 the system was upgraded. This upgrade involved starting the project over from scratch, so the installation package wil...Exchange 2010 RBAC Editor (RBAC GUI) - updated on 5/24/2010: RBAC Editor 0.9.3.1: Some bugs fixed, support added for unscopedtoplevel roles (still in progress), added logging capabilities Please use email address in About menu o...Hammock for REST: Hammock v1.0.4: v1.0.4 ChangesAdded handling for special characters in OAuth signatures (\r\n\t\b) Corrected an inconsistency in OAuth GET vs. POST when encoding...HKGolden Express: HKGoldenExpress (Build 201005231730): New features: (None) Bug fix: Fixed problem of unable to start new thread. Fixed problem of unable to show user icons due to incorrect path. ...Kurumsal Ofis Paketi: Kurumsal Ofis Paketi Sürüm 1.0: Kurumsal Ofis Paketi Sürüm 1.0MDownloader: MDownloader-0.15.15.59175: Fixed FileFactory implementation (FileFactory team doesn't give up); Fixed minor bugs.Munq: Tools for ASP.NET MVC: Munq IocContainer Version 2.0: The latest and greatest.NLog - Advanced .NET Logging: Nightly Build 2010.05.23.001: Changes since the last build:2010-05-23 00:01:19 Jarek Kowalski Made contition on <when /> required. Added unit tests. 2010-05-22 20:06:16 Jarek K...NUnit for Team Build: Version 2.0 Alpha 1: This version has experimental TFS 2010 support. I have been using it successfully with TFS 2010 for a few weeks now with no problems. It should be ...Partner Relationship Management (PRM) Accelerator for Microsoft Dynamics CRM: PRM Accelerator (R2) for Dynamics CRM 4.0: The Partner Relationship Management (PRM) Accelerator allows businesses to use Microsoft Dynamics CRM to distribute sales leads and centrally manag...Percussion Toolkit: Command line Note Detector 1.0: A command line tool for detecting note onsets in WAV files. Note: Currently only supports 32-bit float encoded Microsoft WAV files with a sample ...Percussion Toolkit: Reference Input Data Set (A): This release contains a set of input WAV files for testing note onset detection accuracy and effectiveness. The archive contains computer-generate...Percussion Toolkit: Rhythm Friend: Rhythm Friend is an interactive tool for practicing drum rudiments. It provides a simple metronome coupled with rhythm coach features.SharePoint List Field Manager: SharePoint List Field Manager: This is Version 2 of the SharePoint List Field Manager. First created for CorasWorks customers, we have decided to make it publically available to ...Silverlight 4.0 Popup Menu: Context Menu for Silverlight 4.0 v1.2 Beta: - Added delay on hover events for both parent and child menus. - Parent menus now close automatically when child menu is clicked. - Updated referen...Software Is Hardwork: Sw. Is Hw. Lib. 3.0.0.x+03: Sw. Is Hw. Lib. 3.0.0.x+03 UNSUPPORTED, UNTESTED ALPHA RELEASE Code may disappear. This is just a preview of code that was in progress. Code is s...The Fastcopy Helper: The Fastcopy Helper 2.0: The Fastcopy Helper 2.0 This is a new method to run for it . Fastcopy同步辅助器 方案二 这个方案二，是使用了全新的方法进行磁盘文件扫描，和比较。速度飙升到最快！同时优化了很多细节的内容，使得性能大幅度提升。User Profile WebPart: UserProfileWebPart 1.0: Inititial release.VCC: Latest build, v2.1.30523.0: Automatic drop of latest buildVolumeMasterCmd: VolumeMaster 1.0: First release.XNA Collision Detection: XNA Static Collider: Provides collision detection between a Model and BoundingSphere, or a Model and Ray. An example of how to initialize a collision object: Collidee...xxfd1r4w96: 20100523: Приложението има следната функционалност: 1. Добавяне на сайта https://online.bulbank.bg в trusted sites. 2. Инсталиране на Bulbank Root Certificat...Yet another developer blog - Examples: Asynchronous Form in ASP.NET MVC: This sample application shows how to use jQuery Validation plugin for creating an asynchronous form in ASP.NET MVC 1 with client side validation. T...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryPHPExcelMicrosoft SQL Server Community & SamplesASP.NETMost Active ProjectsRawrpatterns & practices – Enterprise LibrarySqlServerExtensionsGMap.NET - Great Maps for Windows Forms & PresentationCaliburn: An Application Framework for WPF and Silverlightpatterns & practices: Windows Azure Security GuidanceCassiniDev - Cassini 3.5/4.0 Developers EditionNB_Store - Free DotNetNuke Ecommerce Catalog ModuleCodeReviewBlogEngine.NET

  Read the article

• CodePlex Daily Summary for Sunday, April 25, 2010

  CodePlex Daily Summary for Sunday, April 25, 2010New Projects281slides: 281slides is a project to demonstrate how one could go about implementing something similar to http://280slides.com in Silverlight3.Alex.XP's ARMA2 Chinese Language Pack Tools: Alex.XP's ARMA2 Chinese Language ToolsAuto Version Web Assets: The AVWA project is an HTTP Module written in C# that is designed to allow for versioning of various web assets such as .CSS and .JS files. This a...CAECE Twitter Clon: Proyecto para hacer un clon de twitter alumnos CAECE 2010DNSExchanger: Provides users to switch their PC's DNSs with pre-defined DNS with one click. Fluent ViewModel Configuration for WPF (MVVM): Fluent MVVM Configuration for WPF. A powerful yet simple interface for configuring view models for WPF. Eliminates INotifyPropertyChanged duplic...Genetic Algorithm N-Queens Solver: Genetic Algorithm N-Queens Solver with Multithreaded GUI.Hangmanondotnet: Just a starterHelium Frog Animator: Here is the Source code for the Helium Frog Animator. It is released under the GNU General Public Licence. The software enables stop motion animati...LISCH Collision Resolution, AVL Trees: LISCH Collision Resolution, AVL Trees Last Insertion Standart Colesced HashingNetPE: NetPE is a Portable Executable(PE) editor with full Metadata support. It is developed in pure C#.Proyecto Nilo: nada por ahoraSQL Schema Source Control: Track database schema changes automatically C# application that you can run against your SQL Databases (supports SQL 2008 right now, but you cou...uTorrent-Net-Client: A network client for uTorrent over the uTorrent-WebAPI. The Client use the API implementation from "uTorrent Web Client API Wrapper Library" (http:...Visual Leak Detector for Visual C++ 2008/2010: Enhanced Memory Leak Detection for Visual C++Visual Studio 2010 AutoScroller Extension: This is an extension to provide auto-scrolling to the Visual Studio 2010 environment. Simply middle click and drag the mouse in the direction yo...Vje: Vje projectVs2010-TipSite - Enter Island: This project is a visual studio 2010 project created in Silverligt. The project used to give using tips about visual studio 2010 by movies clips an...WKURM: Research Methods project @ western kentucky universityYupsky: yupsky webNew Releases.NET DiscUtils: Version 0.8: This is the 0.8 release of DiscUtils. New in this release are: An NFS client, supporting access to virtual disks held on an NFS server. A PowerS...Bluetooth Radar: Version 2.2: Add Settings window Get installed services on the deveice Check if Object Exchange is installed and changed properties. Add Windows Bluetooth...CSharp Intellisense: V1.7: major improvements: - Select best suggestion - on going changes filters (the filters will changed according to the current typing) - remember last ...DNSExchanger: DNSExchanger Beta v0.1: First release of the project, DNSExchanger. It requires, 32-bit Operating System (XP, Vista, 7) and need to be runned with administration credent...DotNetNuke® Form and List (formerly User Defined Table): 05.01.03: Form and List 05.01.03What's New: This release, Form and List 05.01.03, will be a stabilization release. It requires at least DotNetNuke 5.1.3 for...Enki Char 2 BIN: Enki Char 2 Bin: This program converts Characters to Binary and vice versaFluent ViewModel Configuration for WPF (MVVM): FluentViewModel Alpha1: This is a debug build of the FluentViewModel library. This has been provided to get feed back on the API and to look for bugs. For an example on h...Hangmanondotnet: Hangman: Just a previewHelium Frog Animator: Helium Frog 2.06 Documentation: Complete User Guide documentation in html formatHelium Frog Animator: Helium Frog 2.06 Source Code: Zip file contains all Visual Basic 6 source code, Artwork, sound files etc.Helium Frog Animator: Helium Frog Version 2.06: This file is the released version on Helium Frog 2.06. It contains binary files and required runtime libraries.Helium Frog Animator: Motion Jpeg Handling 10: Source code , module and debugging application in C# a) Module concatenates .jpg files to motion jpeg .avi file. b) Module retrieves any required ...Helium Frog Animator: Sample Grabber 03: Source code and debug program in C# a) Module lists all the available DirextX source devices b) Sets up video streaming to a picturebox by creating...Henge3D Physics Library for XNA: Henge3D Source (2010-04): The biggest change in this release was the addition of the OnCollision and OnSeparation "events" in the RigidBody class. An attached handler will r...HouseFly controls: HouseFly controls alpha 0.9.4.1: HouseFly controls release 0.9.4.1 alphaHTML Ruby: 6.22.0: Added new options for adjusting ruby line height and text line height Live preview for options Adjusted applied styles Added option to report...HTML Ruby: 6.22.1: space by word if ASCII character improved handling of unclosed ruby tagMultiwfn: Multiwfn1.3_binary: Multiwfn1.3_binaryMultiwfn: multiwfn1.3_source: multiwfn1.3_sourceRapid Dictionary: Rapid Dictionary Alpha 1.0: Try auto updatable version: http://install.rapiddict.com/index.html Rapid Dictionary Alpha 1.0 includes such functionality:you can run translation...Silverlight Input Keyboard: Version 1.5 for Silverlight 4: Dependency System.Windows.Interactivity.dll from Blend 4 RC http://www.microsoft.com/downloads/details.aspx?FamilyID=88484825-1b3c-4e8c-8b14-b05d02...SQL Schema Source Control: 1.0: Initial ReleaseUDC indexes parser: UDC indexex parser Beta: LALR(1): 1) Невозможно использовать знак распространения на общие и специальные определители, за исключением определителей в скобках (), (0), (=), ...uTorrent-Net-Client: uTorrent-Net-Client: This download contains the uTorrentNetClient and the 7Zip Windows-Service. Before you can use both, you must configuration some points in the App.C...VidCoder: 0.3.0: Changes: Added customizable columns on the Queue. Right click->Customize columns, then drag and drop to choose and reorder. Column sizes will also...Visual Leak Detector for Visual C++ 2008/2010: v2.0: New version of VLD. This adds support for x64 applications and VS 2010.Visual Studio 2010 AutoScroller Extension: AutoScroller v0.1: Initial release of Visual studio 2010 auto-scroller extension. Simply middle click and drag the mouse in the direction you wish to scroll, further...Yasbg: It's Static GUI: Many changes have been made from the previous release. Read the README! This release adds a GUI and RSS support. From now on, this program is only...Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitSilverlight ToolkitMicrosoft SQL Server Product Samples: Databasepatterns & practices – Enterprise LibraryWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesPHPExcelMost Active Projectspatterns & practices – Enterprise LibraryRawrGMap.NET - Great Maps for Windows Forms & PresentationBlogEngine.NETParticle Plot PivotNB_Store - Free DotNetNuke Ecommerce Catalog ModuleDotNetZip LibraryN2 CMSFarseer Physics Enginepatterns & practices: Composite WPF and Silverlight

  Read the article

• How to correctly use DERIVE or COUNTER in munin plugins

  - by Johan

  I'm using munin to monitor my server. I've been able to write plugins for it, but only if the graph type is GAUGE. When I try COUNTER or DERIVE, no data is logged or graphed. The plugin i'm currently stuck on is for monitoring bandwidth usage, and is as follows: /etc/munin/plugins/bandwidth2 #!/bin/sh if [ "$1" = "config" ]; then echo 'graph_title Bandwidth Usage 2' echo 'graph_vlabel Bandwidth' echo 'graph_scale no' echo 'graph_category network' echo 'graph_info Bandwidth usage.' echo 'used.label Used' echo 'used.info Bandwidth used so far this month.' echo 'used.type DERIVE' echo 'used.min 0' echo 'remain.label Remaining' echo 'remain.info Bandwidth remaining this month.' echo 'remain.type DERIVE' echo 'remain.min 0' exit 0 fi cat /var/log/zen.log The contents of /var/log/zen.log are: used.value 61.3251953125 remain.value 20.0146484375 And the resulting database is: <!-- Round Robin Database Dump --><rrd> <version> 0003 </version> <step> 300 </step> <!-- Seconds --> <lastupdate> 1269936605 </lastupdate> <!-- 2010-03-30 09:10:05 BST --> <ds> <name> 42 </name> <type> DERIVE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max> <!-- PDP Status --> <last_ds> 61.3251953125 </last_ds> <value> NaN </value> <unknown_sec> 5 </unknown_sec> </ds> <!-- Round Robin Archives --> <rra> <cf> AVERAGE </cf> <pdp_per_row> 1 </pdp_per_row> <!-- 300 seconds --> <params> <xff> 5.0000000000e-01 </xff> </params> <cdp_prep> <ds> <primary_value> NaN </primary_value> <secondary_value> NaN </secondary_value> <value> NaN </value> <unknown_datapoints> 0 </unknown_datapoints> </ds> </cdp_prep> <database> <!-- 2010-03-28 09:15:00 BST / 1269764100 --> <row><v> NaN </v></row> <!-- 2010-03-28 09:20:00 BST / 1269764400 --> <row><v> NaN </v></row> <!-- 2010-03-28 09:25:00 BST / 1269764700 --> <row><v> NaN </v></row> <snip> The value for last_ds is correct, it just doesn't seem to make it into the actual database. If I change DERIVE to GAUGE, it works as expected. munin-run bandwidth2 outputs the contents of /var/log/zen.log I've been all over the (sparse) docs for munin plugins, and can't find my mistake. Modifying an existing plugin didn't work for me either.

  Read the article

• arp problems with transparent bridge on linux

  - by Mink

  I've been trying to secure my virtual machines on my esx server by putting them behind a transparent bridge with 2 interfaces, one in front, one at the back. My intention is to put all the firewall rules in one place (instead of on each virtual server). I've been using as bridge a blank new virtual machine based on arch linux (but I suspect it doesn't matter which brand of linux it is). What I have is 2 virtual switchs (thus two Virtual Network, VN_front and VN_back), each with 2 types of ports (switched/separated or promiscious/where the machine can see all packets). On my bridge machine, I've set up 2 virtual NIC, one on VN_front, one on VN_back, both in promisc mode. I've created a bridge br0 with both NIC in it: brctl addbr br0 brctl stp br0 off brctl addif br0 front_if brctl addif br0 back_if Then brought them up: ifconfig front_if 0.0.0.0 promisc ifconfig back_if 0.0.0.0 promisc ifconfig br0 0.0.0.0 (I use promisc mode, because I'm not sure I can do without, thinking that maybe the packets don't reach the NICs) Then I took one of my virtual server sitting on VN_front, and plugged it to VN_back instead (that's the nifty use case I'm thinking about, being able to move my servers around just by changing the VN they are plugged into, without changing anything in the configuration). Then I looked into the macs "seen" by my addressless bridge using brctl showmacs br0 and it did show my server from both sides: I get something that looks like this : port no mac addr is local? ageing timer 2 00:0c:29:e1:54:75 no 9.27 1 00:0c:29:fd:86:0c no 9.27 2 00:50:56:90:05:86 no 73.38 1 00:50:56:90:05:88 no 0.10 2 00:50:56:90:05:8b yes 0.00 << FRONT VN 1 00:50:56:90:05:8c yes 0.00 << BACK VN 2 00:50:56:90:19:18 no 13.55 2 00:50:56:90:3c:cf no 13.57 the thing is that the server that are plugged in front/back are not shown on the correct port. I suspect some horrible thing happening in the ARP-world... :-/ If I ping from a front virtual server to a back virtual server, I can only see the back machine if that back machine pings something in the front. As soon as I stop the ping from the back machine, the ping from the front machine stops getting through... I've noticed that if the back machine pings, then its port on the bridge is the correct one... I've tried to play with the arp_ switch of /proc/sys, but with no clear effect on the end result... /proc/sys/net/ipv4/ip_forward doesn't seem to be of any use when using a bridge (seems it's all taken care of by brctl) /proc/sys/net/ipv4/conf//arp_ don't seem to change much either... (tried arp_announce to 2 or 8 - like suggested elsewhere - and arp_ignore to 0 or 1 ) All the examples I've seen have a different subnet on either side like 10.0.1.0/24 and 10.0.2.0/24... In my case I want 10.0.1.0/24 on both side (just like a transparent switch - except it's a hidden fw ). Turning stp on/off doesn't seem to have any impact on my issue. It's as if the arp packets where getting through the bridge, corrupting the other side with false data... I've tried to use the -arp on each interface, br0, front, back... it breaks the thing altogether... I suspect it has something to do with both side being on the same subnet... I've thought about putting all my machine behind the fw, so as to have all the same subnet at the back... but I'm stuck with my provider's gateway standing at the front with part of my subnet (in fact 3 appliance to route the whole subnet), so I'll always have ips from the same subnet on both side, whatever I do... (I'm using fixed front IPs on my delegated subnet). I'm at a loss... -_-'' Thx for your help. (As anyone tried something like this? from within ESXi?) (It's not just a stunt, the idea is to have something like fail2ban running on some servers, sending their banned IP to the bridge/fw so that it too could ban them - saving all the other servers from that same attacker in one go, allowing for some honeypot that would trigger the fw from any kind of suitable response, and stuffs of the sort... I am aware I could use something like snort, but it addresses some completely different kind of problems, in a completely different way... )

  Read the article

• postfix 5.7.1 Relay access denied when sending mail with cron

  - by zensys

  Reluctant to ask because there is so much here about 'postfix relay access denied' but I cannot find my case: I use php (Zend Framework) to send emails outside my network using the Google mail server because I could not send mail outside my server (user: web). However when I sent out an email via cron (user: root, I believe), still using ZF, using the same mail config/credentials, I get the message: '5.7.1 Relay access denied' I guess I need to know one of two things: 1. How can I use the google smtp server from cron 2. What do I need to change in my config to send mail using my own server instead of google Though the answer to 2. is the more structural solution I assume, I am quite happy with an answer to 1. as well because I think Google is better at server maintaince (security/spam) than I am. Below my ZF application.ini mail section, main.cf and master.cf: application.ini: resources.mail.transport.type = smtp resources.mail.transport.auth = login resources.mail.transport.host = "smtp.gmail.com" resources.mail.transport.ssl = tls resources.mail.transport.port = 587 resources.mail.transport.username = [email protected] resources.mail.transport.password = xxxxxxx resources.mail.defaultFrom.email = [email protected] resources.mail.defaultFrom.name = "my company" main.cf: # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = /usr/share/doc/postfix # TLS parameters smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_use_tls = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = mail.second-start.nl mydomain = second-start.nl alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all html_directory = /usr/share/doc/postfix/html message_size_limit = 30720000 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_authenticated_header = yes # see under Spam smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps virtual_transport = dovecot dovecot_destination_recipient_limit = 1 # Spam disable_vrfy_command = yes smtpd_delay_reject = yes smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, check_helo_access hash:/etc/postfix/helo_access, reject_non_fqdn_hostname, reject_invalid_hostname, permit smtpd_recipient_restrictions = permit_sasl_authenticated, reject_unauth_destination, reject_invalid_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_sender_domain, reject_unknown_recipient_domain, permit_mynetworks, reject_non_fqdn_hostname, reject_rbl_client sbl.spamhaus.org, reject_rbl_client zen.spamhaus.org, reject_rbl_client cbl.abuseat.org, reject_rbl_client bl.spamcop.net, permit smtpd_error_sleep_time = 1s smtpd_soft_error_limit = 10 smtpd_hard_error_limit = 20 master.cf: # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #smtp inet n - - - 1 postscreen #smtpd pass - - - - - smtpd #dnsblog unix - - - - 0 dnsblog #tlsproxy unix - - - - 0 tlsproxy #submission inet n - - - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient}

  Read the article

• Oracle @ E20 Conference Boston - Building Social Business

  - by Michael Snow

  12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle WebCenter is The Engagement Platform Powering Exceptional Experiences for Employees, Partners and Customers &amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;span id=&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt;lt;p&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt; &amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;/p&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt; The way we work is changing rapidly, offering an enormous competitive advantage to those who embrace the new tools that enable contextual, agile and simplified information exchange and collaboration to distributed workforces and  networks of partners and customers. As many of you are aware, Enterprise 2.0 is the term for the technologies and business practices that liberate the workforce from the constraints of legacy communication and productivity tools like email. It provides business managers with access to the right information at the right time through a web of inter-connected applications, services and devices. Enterprise 2.0 makes accessible the collective intelligence of many, translating to a huge  competitive advantage in the form of increased innovation, productivity and agility.The Enterprise 2.0 Conference takes a strategic perspective, emphasizing the bigger picture implications of the technology and the exploration of what is at stake for organizations trying to change not only tools, but also culture and process. Beyond discussion of the "why", there will also be in-depth opportunities for learning the "how" that will help you bring Enterprise 2.0 to your business. You won't want to miss this opportunity to learn and hear from leading experts in the fields of technology for business, collaboration, culture change and collective intelligence.Oracle was a proud Gold sponsor of the Enterprise 2.0 Conference, taking place this past week in Boston. For those of you that weren't able to make it - we've made the Oracle Social Network Presentation session available here and have posted the slides below. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The following is intended to outline our general product direction. It is intended for information purposes only, and may not be incorporated into any contract. It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decisions. The development, release, and timing of any features or functionality described for Oracle’s products remains at the sole discretion of Oracle. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Manage SQL Server Connectivity through Windows Azure Virtual Machines Remote PowerShell

  - by SQLOS Team

  Manage SQL Server Connectivity through Windows Azure Virtual Machines Remote PowerShell Blog This blog post comes from Khalid Mouss, Senior Program Manager in Microsoft SQL Server. Overview The goal of this blog is to demonstrate how we can automate through PowerShell connecting multiple SQL Server deployments in Windows Azure Virtual Machines. We would configure TCP port that we would open (and close) though Windows firewall from a remote PowerShell session to the Virtual Machine (VM). This will demonstrate how to take the advantage of the remote PowerShell support in Windows Azure Virtual Machines to automate the steps required to connect SQL Server in the same cloud service and in different cloud services.  Scenario 1: VMs connected through the same Cloud Service 2 Virtual machines configured in the same cloud service. Both VMs running different SQL Server instances on them. Both VMs configured with remote PowerShell turned on to be able to run PS and other commands directly into them remotely in order to re-configure them to allow incoming SQL connections from a remote VM or on premise machine(s). Note: RDP (Remote Desktop Protocol) is kept configured in both VMs by default to be able to remote connect to them and check the connections to SQL instances for demo purposes only; but not actually required. Step 1 – Provision VMs and Configure Ports   Provision VM1; named DemoVM1 as follows (see examples screenshots below if using the portal):   Provision VM2 (DemoVM2) with PowerShell Remoting enabled and connected to DemoVM1 above (see examples screenshots below if using the portal): After provisioning of the 2 VMs above, here is the default port configurations for example: Step2 – Verify / Confirm the TCP port used by the database Engine By the default, the port will be configured to be 1433 – this can be changed to a different port number if desired.   1. RDP to each of the VMs created below – this will also ensure the VMs complete SysPrep(ing) and complete configuration 2. Go to SQL Server Configuration Manager -> SQL Server Network Configuration -> Protocols for <SQL instance> -> TCP/IP - > IP Addresses   3. Confirm the port number used by SQL Server Engine; in this case 1433 4. Update from Windows Authentication to Mixed mode   5.       Restart SQL Server service for the change to take effect 6.       Repeat steps 3., 4., and 5. For the second VM: DemoVM2 Step 3 – Remote Powershell to DemoVM1 Enter-PSSession -ComputerName condemo.cloudapp.net -Port 61503 -Credential <username> -UseSSL -SessionOption (New-PSSessionOption -SkipCACheck -SkipCNCheck) Your will then be prompted to enter the password. Step 4 – Open 1433 port in the Windows firewall netsh advfirewall firewall add rule name="DemoVM1Port" dir=in localport=1433 protocol=TCP action=allow Output: netsh advfirewall firewall show rule name=DemoVM1Port Rule Name:                            DemoVM1Port ---------------------------------------------------------------------- Enabled:                              Yes Direction:                            In Profiles:                             Domain,Private,Public Grouping:                             LocalIP:                              Any RemoteIP:                             Any Protocol:                             TCP LocalPort:                            1433 RemotePort:                           Any Edge traversal:                       No Action:                               Allow Ok. Step 5 – Now connect from DemoVM2 to DB instance in DemoVM1 Step 6 – Close port 1433 in the Windows firewall netsh advfirewall firewall delete rule name=DemoVM1Port Output: Deleted 1 rule(s). Ok. netsh advfirewall firewall show  rule name=DemoVM1Port No rules match the specified criteria.   Step 7 – Try to connect from DemoVM2 to DB Instance in DemoVM1  Because port 1433 has been closed (in step 6) in the Windows Firewall in VM1 machine, we can longer connect from VM3 remotely to VM1. Scenario 2: VMs provisioned in different Cloud Services 2 Virtual machines configured in different cloud services. Both VMs running different SQL Server instances on them. Both VMs configured with remote PowerShell turned on to be able to run PS and other commands directly into them remotely in order to re-configure them to allow incoming SQL connections from a remote VM or on on-premise machine(s). Note: RDP (Remote Desktop Protocol) is kept configured in both VMs by default to be able to remote connect to them and check the connections to SQL instances for demo purposes only; but not actually needed. Step 1 – Provision new VM3 Provision VM3; named DemoVM3 as follows (see examples screenshots below if using the portal): After provisioning is complete, here is the default port configurations: Step 2 – Add public port to VM1 connect to from VM3’s DB instance Since VM3 and VM1 are not connected in the same cloud service, we will need to specify the full DNS address while connecting between the machines which includes the public port. We shall add a public port 57000 in this case that is linked to private port 1433 which will be used later to connect to the DB instance. Step 3 – Remote Powershell to DemoVM1 Enter-PSSession -ComputerName condemo.cloudapp.net -Port 61503 -Credential <UserName> -UseSSL -SessionOption (New-PSSessionOption -SkipCACheck -SkipCNCheck) You will then be prompted to enter the password.   Step 4 – Open 1433 port in the Windows firewall netsh advfirewall firewall add rule name="DemoVM1Port" dir=in localport=1433 protocol=TCP action=allow Output: Ok. netsh advfirewall firewall show rule name=DemoVM1Port Rule Name:                            DemoVM1Port ---------------------------------------------------------------------- Enabled:                              Yes Direction:                            In Profiles:                             Domain,Private,Public Grouping:                             LocalIP:                              Any RemoteIP:                             Any Protocol:                             TCP LocalPort:                            1433 RemotePort:                           Any Edge traversal:                       No Action:                               Allow Ok.   Step 5 – Now connect from DemoVM3 to DB instance in DemoVM1 RDP into VM3, launch SSM and Connect to VM1’s DB instance as follows. You must specify the full server name using the DNS address and public port number configured above. Step 6 – Close port 1433 in the Windows firewall netsh advfirewall firewall delete rule name=DemoVM1Port   Output: Deleted 1 rule(s). Ok. netsh advfirewall firewall show  rule name=DemoVM1Port No rules match the specified criteria.  Step 7 – Try to connect from DemoVM2 to DB Instance in DemoVM1  Because port 1433 has been closed (in step 6) in the Windows Firewall in VM1 machine, we can no longer connect from VM3 remotely to VM1. Conclusion Through the new support for remote PowerShell in Windows Azure Virtual Machines, one can script and automate many Virtual Machine and SQL management tasks. In this blog, we have demonstrated, how to start a remote PowerShell session, re-configure Virtual Machine firewall to allow (or disallow) SQL Server connections. References SQL Server in Windows Azure Virtual Machines   Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• Ubuntu 11.10 - Everytime i am trying to connect to my box using SSH, its failing not connecting

  - by YumYumYum

  From any other PC doing SSH to my Ubuntu 11.10,is failing. Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 -- apt-get install openipml openhpi-plugin-ipml

  Read the article

• outgoing DNS flood targeted to non-ISP hosts

  - by radudani

  Below is the specific traffic monitored at the network perimeter and originating from a user PC on Vista platform. My question is not about the effects of the flood, but about the nature of the source of it. Is this some known infection, or just an application went out of control? a standard NOD32 scan didn't find anything, as the user told me. Thank you for any hint. 14:40:10.115876 IP 192.168.7.42.4122 > 67.228.0.181.53: S 2742536765:2742536765(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.115943 IP 192.168.7.42.4124 > 67.228.181.207.53: S 3071079888:3071079888(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116015 IP 192.168.7.42.4126 > 67.228.0.181.53: S 3445199428:3445199428(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116086 IP 192.168.7.42.4128 > 67.228.181.207.53: S 2053198691:2053198691(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116154 IP 192.168.7.42.4130 > 67.228.0.181.53: S 2841660872:2841660872(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116222 IP 192.168.7.42.4132 > 67.228.181.207.53: S 3150822465:3150822465(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116290 IP 192.168.7.42.4134 > 67.228.0.181.53: S 1692515021:1692515021(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116358 IP 192.168.7.42.4136 > 67.228.181.207.53: S 3358275919:3358275919(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116430 IP 192.168.7.42.4138 > 67.228.0.181.53: S 930184999:930184999(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116498 IP 192.168.7.42.4140 > 67.228.181.207.53: S 1504984630:1504984630(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116566 IP 192.168.7.42.4142 > 67.228.0.181.53: S 546074424:546074424(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116634 IP 192.168.7.42.4144 > 67.228.181.207.53: S 4241828590:4241828590(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116702 IP 192.168.7.42.4146 > 67.228.0.181.53: S 668634627:668634627(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.116769 IP 192.168.7.42.4148 > 67.228.181.207.53: S 3768119461:3768119461(0) win 16384 <mss 1460,nop,nop,sackOK> 14:40:10.117360 IP 192.168.7.42.4111 > 67.228.0.181.53: 12676 op8 Resp12*- [2128q][|domain] 14:40:10.117932 IP 192.168.7.42.4112 > 67.228.181.207.53: 44190 op7 NotAuth*|$ [29103q],[|domain] 14:40:10.118726 IP 192.168.7.42.4113 > 67.228.0.181.53: 49196 inv_q [b2&3=0xeea] [64081q] [28317a] [43054n] [23433au] Type63482 (Class 5889)? M-_^OS>M-JM-m^_M-i.[|domain] 14:40:10.119934 IP 192.168.7.42.4114 > 67.228.181.207.53: 48131 updateMA Resp12$ [43850q],[|domain] 14:40:10.121164 IP 192.168.7.42.4115 > 67.228.0.181.53: 46330 updateM% [b2&3=0x665b] [23691a] [998q] [32406n] [11452au][|domain] 14:40:10.121866 IP 192.168.7.42.4116 > 67.228.181.207.53: 34425 op7 YXRRSet* [39927q][|domain] 14:40:10.123107 IP 192.168.7.42.4117 > 67.228.0.181.53: 56536 notify+ [b2&3=0x27e6] [59761a] [23005q] [33341n] [29705au][|domain] 14:40:10.123961 IP 192.168.7.42.4118 > 67.228.181.207.53: 19323 stat% [b2&3=0x14bb] [32491a] [41925q] [2038n] [5857au][|domain] 14:40:10.132499 IP 192.168.7.42.4119 > 67.228.0.181.53: 50432 updateMA+ [b2&3=0x6bc2] [10733a] [9775q] [46984n] [15261au][|domain] 14:40:10.133394 IP 192.168.7.42.4120 > 67.228.181.207.53: 2171 notify Refused$ [26027q][|domain] 14:40:10.134421 IP 192.168.7.42.4121 > 67.228.0.181.53: 25802 updateM NXDomain*-$ [28641q][|domain] 14:40:10.135392 IP 192.168.7.42.4122 > 67.228.181.207.53: 2073 updateMA+ [b2&3=0x6d0b] [43177a] [54332q] [17736n] [43636au][|domain] 14:40:10.136638 IP 192.168.7.42.4123 > 67.228.0.181.53: 15346 updateD+% [b2&3=0x577a] [61686a] [19106q] [15824n] [37833au] Type28590 (Class 64856)? [|domain] 14:40:10.137265 IP 192.168.7.42.4124 > 67.228.181.207.53: 60761 update+ [b2&3=0x2b66] [43293a] [53922q] [23115n] [11349au][|domain] 14:40:10.148122 IP 192.168.7.42.4125 > 67.228.0.181.53: 3418 op3% [b2&3=0x1a92] [51107a] [60368q] [47777n] [56081au][|domain]

  Read the article

• 10 Windows Tweaking Myths Debunked

  - by Chris Hoffman

  Windows is big, complicated, and misunderstood. You’ll still stumble across bad advice from time to time when browsing the web. These Windows tweaking, performance, and system maintenance tips are mostly just useless, but some are actively harmful. Luckily, most of these myths have been stomped out on mainstream sites and forums. However, if you start searching the web, you’ll still find websites that recommend you do these things. Erase Cache Files Regularly to Speed Things Up You can free up disk space by running an application like CCleaner, another temporary-file-cleaning utility, or even the Windows Disk Cleanup tool. In some cases, you may even see an old computer speed up when you erase a large amount of useless files. However, running CCleaner or similar utilities every day to erase your browser’s cache won’t actually speed things up. It will slow down your web browsing as your web browser is forced to redownload the files all over again, and reconstruct the cache you regularly delete. If you’ve installed CCleaner or a similar program and run it every day with the default settings, you’re actually slowing down your web browsing. Consider at least preventing the program from wiping out your web browser cache. Enable ReadyBoost to Speed Up Modern PCs Windows still prompts you to enable ReadyBoost when you insert a USB stick or memory card. On modern computers, this is completely pointless — ReadyBoost won’t actually speed up your computer if you have at least 1 GB of RAM. If you have a very old computer with a tiny amount of RAM — think 512 MB — ReadyBoost may help a bit. Otherwise, don’t bother. Open the Disk Defragmenter and Manually Defragment On Windows 98, users had to manually open the defragmentation tool and run it, ensuring no other applications were using the hard drive while it did its work. Modern versions of Windows are capable of defragmenting your file system while other programs are using it, and they automatically defragment your disks for you. If you’re still opening the Disk Defragmenter every week and clicking the Defragment button, you don’t need to do this — Windows is doing it for you unless you’ve told it not to run on a schedule. Modern computers with solid-state drives don’t have to be defragmented at all. Disable Your Pagefile to Increase Performance When Windows runs out of empty space in RAM, it swaps out data from memory to a pagefile on your hard disk. If a computer doesn’t have much memory and it’s running slow, it’s probably moving data to the pagefile or reading data from it. Some Windows geeks seem to think that the pagefile is bad for system performance and disable it completely. The argument seems to be that Windows can’t be trusted to manage a pagefile and won’t use it intelligently, so the pagefile needs to be removed. As long as you have enough RAM, it’s true that you can get by without a pagefile. However, if you do have enough RAM, Windows will only use the pagefile rarely anyway. Tests have found that disabling the pagefile offers no performance benefit. Enable CPU Cores in MSConfig Some websites claim that Windows may not be using all of your CPU cores or that you can speed up your boot time by increasing the amount of cores used during boot. They direct you to the MSConfig application, where you can indeed select an option that appears to increase the amount of cores used. In reality, Windows always uses the maximum amount of processor cores your CPU has. (Technically, only one core is used at the beginning of the boot process, but the additional cores are quickly activated.) Leave this option unchecked. It’s just a debugging option that allows you to set a maximum number of cores, so it would be useful if you wanted to force Windows to only use a single core on a multi-core system — but all it can do is restrict the amount of cores used. Clean Your Prefetch To Increase Startup Speed Windows watches the programs you run and creates .pf files in its Prefetch folder for them. The Prefetch feature works as a sort of cache — when you open an application, Windows checks the Prefetch folder, looks at the application’s .pf file (if it exists), and uses that as a guide to start preloading data that the application will use. This helps your applications start faster. Some Windows geeks have misunderstood this feature. They believe that Windows loads these files at boot, so your boot time will slow down due to Windows preloading the data specified in the .pf files. They also argue you’ll build up useless files as you uninstall programs and .pf files will be left over. In reality, Windows only loads the data in these .pf files when you launch the associated application and only stores .pf files for the 128 most recently launched programs. If you were to regularly clean out the Prefetch folder, not only would programs take longer to open because they won’t be preloaded, Windows will have to waste time recreating all the .pf files. You could also modify the PrefetchParameters setting to disable Prefetch, but there’s no reason to do that. Let Windows manage Prefetch on its own. Disable QoS To Increase Network Bandwidth Quality of Service (QoS) is a feature that allows your computer to prioritize its traffic. For example, a time-critical application like Skype could choose to use QoS and prioritize its traffic over a file-downloading program so your voice conversation would work smoothly, even while you were downloading files. Some people incorrectly believe that QoS always reserves a certain amount of bandwidth and this bandwidth is unused until you disable it. This is untrue. In reality, 100% of bandwidth is normally available to all applications unless a program chooses to use QoS. Even if a program does choose to use QoS, the reserved space will be available to other programs unless the program is actively using it. No bandwidth is ever set aside and left empty. Set DisablePagingExecutive to Make Windows Faster The DisablePagingExecutive registry setting is set to 0 by default, which allows drivers and system code to be paged to the disk. When set to 1, drivers and system code will be forced to stay resident in memory. Once again, some people believe that Windows isn’t smart enough to manage the pagefile on its own and believe that changing this option will force Windows to keep important files in memory rather than stupidly paging them out. If you have more than enough memory, changing this won’t really do anything. If you have little memory, changing this setting may force Windows to push programs you’re using to the page file rather than push unused system files there — this would slow things down. This is an option that may be helpful for debugging in some situations, not a setting to change for more performance. Process Idle Tasks to Free Memory Windows does things, such as creating scheduled system restore points, when you step away from your computer. It waits until your computer is “idle” so it won’t slow your computer and waste your time while you’re using it. Running the “Rundll32.exe advapi32.dll,ProcessIdleTasks” command forces Windows to perform all of these tasks while you’re using the computer. This is completely pointless and won’t help free memory or anything like that — all you’re doing is forcing Windows to slow your computer down while you’re using it. This command only exists so benchmarking programs can force idle tasks to run before performing benchmarks, ensuring idle tasks don’t start running and interfere with the benchmark. Delay or Disable Windows Services There’s no real reason to disable Windows services anymore. There was a time when Windows was particularly heavy and computers had little memory — think Windows Vista and those “Vista Capable” PCs Microsoft was sued over. Modern versions of Windows like Windows 7 and 8 are lighter than Windows Vista and computers have more than enough memory, so you won’t see any improvements from disabling system services included with Windows. Some people argue for not disabling services, however — they recommend setting services from “Automatic” to “Automatic (Delayed Start)”. By default, the Delayed Start option just starts services two minutes after the last “Automatic” service starts. Setting services to Delayed Start won’t really speed up your boot time, as the services will still need to start — in fact, it may lengthen the time it takes to get a usable desktop as services will still be loading two minutes after booting. Most services can load in parallel, and loading the services as early as possible will result in a better experience. The “Delayed Start” feature is primarily useful for system administrators who need to ensure a specific service starts later than another service. If you ever find a guide that recommends you set a little-known registry setting to improve performance, take a closer look — the change is probably useless. Want to actually speed up your PC? Try disabling useless startup programs that run on boot, increasing your boot time and consuming memory in the background. This is a much better tip than doing any of the above, especially considering most Windows PCs come packed to the brim with bloatware.     

  Read the article

• CodePlex Daily Summary for Monday, October 01, 2012

  CodePlex Daily Summary for Monday, October 01, 2012Popular ReleasesD3 Loot Tracker: 1.4.1: This version will automatically save a recording session on application exit if the user didn't stop the current session.CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.2.1001.1): Visual Ribbon Editor 1.2.1001.1 What's New: Ability to hide currently selected tab Password in the connection file is now being encrypted Esc and Enter keyboard keys are now supported in all dialogs Extended width of Prefix and Id fields in New Button and New Group dialogs Minor UI enchancements for Hide Button button Minor UI enchancements for View XML button and dialog File/assembly versioning for executable file Notes: Existing plain-text password will be automatically encrypt...Untangler: Untangler: First version of Untangler application available now.SubExtractor: Release 1029: Feature: Added option to make i and ¡ characters movie-specific for improved OCR on Spanish subs (Special Characters tab in Options) Feature: Allow switch to Word Spacing dialog directly from Spell Check dialog Fix: Added more default word spacings for accented characters Fix: Changed Word Spacing dialog to show all OCR'd characters in current sub Fix: Removed application focus grab during OCR Fix: Tightened HD subs fuzzy logic to reduce false matches in small characters Fix: Improved Arrow k...MCEBuddy 2.x: MCEBuddy 2.2.18: Reccomended download Changelog for 2.2.18 (32bit and 64bit) 1. Added support for checking if Showanalyzer has hung and cancelling it 2. New version of comskip, 0.81.48 3. Speeding up comskip 4. Fixed a build bug in 64bit 2.2.17 5. Added a new comkip.ini, better commercial detection for international channels and less aggressive. Old one has been retained as comskip_old.ini 6. Added support for Audio Offset on Conversion Task page in GUI (this overrides the profiles AudioDelay when specified)Mugen Injection: Mugen Injection 3.0: Added a generic version of the fluent syntax. Big changes in fluent-syntax. Added support to resolve a parameters: - Factory: AnyCustomFunc{T}, AnyCustomFunc{IEnumerable<IInjectionParameters>,T}, AnyCustomFunc{IDictionary<string, object>,T}, AnyCustomFunc{IEnumerable<IInjectionParameters>,IDictionary<string, object>,T} - Lazy: AnyCustomLazy<T> - Binding metadata: ISetting Change binding builders, now you can configure them through the string settings. Increase performance. F...Aggravation: Version 1.0: This version 1.0 release is pretty stable. You need the Silverlight 4 runtime, developer tools, and Experssion Blend 4 installed.Tube++: Tube++ 4.0.0.43: Fix parser for downloading and add new default slate gray styleReadable Passphrase Generator: KeePass Plugin 0.7.1: See the KeePass Plugin Step By Step Guide for instructions on how to install the plugin. Changes Built against KeePass 2.20Windows 8 Toolkit - Charts and More: Beta 1.0: The First Compiled Version of my LibraryCatchThatException: Release 1.0: This is the first relase for CatchThatException library at 29-9-2012CardPlay: a Solitaire Framework for .Net: 0.3.0: Added 5 games: Blockade, Chessboard, Colorado, Sly Fox, TwentyUltraFluid Modeling Suite: Beta 1: This release is experimental but contains a lot of features like: - xml serialization - multiple selection - clipboard copy/cut/paste on context menu There is the debug and the release (recommanded default) versions.PDF.NET: PDF.NET.Ver4.5-OpenSourceCode: PDF.NET Ver4.5 ????，????Web??????。 PDF.NET Ver4.5 Open Source Code,include a sample Web application project.Visual Studio Icon Patcher: Version 1.5.2: This version contains no new images from v1.5.1 Contains the following improvements: Better support for detecting the installed languages The extract & inject commands won’t run if Visual Studio is running You may now run in extract or inject mode The p/invoke code was cleaned up based on Code Analysis recommendations When a p/invoke method fails the Win32 error message is now displayed Error messages use red text Status messages use green textZXing.Net: ZXing.Net 0.9.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2393 of the java version improved api better Unity support Windows RT binaries Windows CE binaries new Windows Service demo new WPF demo WindowsCE Hotfix: Fixes an error with ISO8859-1 encoding and scannning of QR-Codes. The hotfix is only needed for the WindowsCE platform.C.B.R. : Comic Book Reader: CBR 0.7: Synthesis since 0.6 : ePUB : Complete refactoring Add a new dedicated feed viewer for opds stream PDF conversion : improved with image merge Make all backstage panel scrollable Integrate the new AvalonDock 2 library. Support multi-document. Library explorer and Table of content are now toolboxes Designer for dynamic books is now mvvm and much better New BrowserForControl Customized xps viewer to suppress toolbars and bind it to cbr commands Add quick start manual and button ...sosoft: sosoft source: sosoft source include alarm clockRawr: Rawr 5.0.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Coevery - Free CRM: Coevery 1.0.0.26: The zh-CN issue has been solved. We also add a project management module.New ProjectsAmazonGlacierGUI - GUI Client for Amazon Glacier | WPF: a GUI client for amazon glacier , Written in .NET 4, C#,WPF,MVVM & RavenDB for storageAthene: UML editor.Basic Helpdesk Application: Develop a simple application to be used in a network environment to aid support staff while working remotely with users to resolve problems in their local PC.CAPTCHA Solver: CSolver, is a CAPTCHA Solver for Simple CAPTCHAs.ComicExt: ComicExt Works with CBZ files decompress them into a folder of the same name and convert them into zip files and vice versa from a single folder.Copy Your Table Storage: Tool to permit copy table storage dotCMS: it is a content management system base on BlogEngine.NET and Ext.NETihongma??: ?????????????????????????，????????????????、??????，?????????????????????????????，??????????????????????。 ??????????????，??????；???????????????，???????Liam F: Basic mathematical functions implemented using AVX/AVX2MVC Solution: MVC Solution, including many mvc best practicesopengltest: opengl testsample project: Testing...Sériethèque: A small tvshow organizer with viewed option, link to addict7ed.com, rename file etc ...SHOIC (SUPER HIGH ORBIT ION CANION): SHOIC (Super Hight Orbit Ion Canion) es una aplicación derivada de LOIC (Low Orbit Ion Canion)SignalRServerTry: signal r trySilverlight Datagrid Plus: Silverlight Datagrid plus adds basic features to the Silverlight toolkit datagrid such as grouping, filtering, new record and formatting of the datagrid.Sitecore Modules: This is a home for all the Sitecore Shared Source modules distributed by 5 Limes. Over time we expect this solution to contain several projects.Spiritual Chanting Utility: A quick media loop utilitySQL Web Studio Pad: A Simple Web Based SQL Management IDE for managing Database objectsStockmarket Simulation: Stockmarket Simulationtest_proj: ok testTISSEAN.NET: This project is based on: TISEAN 3.0.1 Nonlinear Time Series Analysis Rainer Hegger,Holger Kantz, Thomas Schreiber With major contributions by Eckehard OlbrichUntangler: Class hierarchy viewer for .Net assemblyValarmathi Hospital: Patient management.Windows 8 App For SharePoint Online: Windows 8 app to SharePoint 2013 OnlineWPF Anti-DataBinding Anti-DataTemplate Extensions: WPF Anti-DataBinding Anti-DataTemplate Extensions offers a pure C# code-behind (no XAML) approach to working with WPF controls, starting with the WPF ListBox.Yandex Positions Parser: ?????? ??????? ????? ? ?????? ??????? ?? ???????? ???????? ??????.YunCMS: A simple CMS for build protal site.

  Read the article

• CodePlex Daily Summary for Monday, December 17, 2012

  CodePlex Daily Summary for Monday, December 17, 2012Popular ReleasesMove Mouse: Move Mouse 2.5.3: FIXED - Issue where it errors on load if the screen saver interval is over 333 minutes.LINUX????????: LINUX????????: LINUX????????cnbeta: cnbeta: cnbetaCSDN ??: CSDN??????: CSDN??????PowerShell Community Extensions: 2.1.1 Production: PowerShell Community Extensions 2.1.1 Release NotesDec 16, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. Bug fix for HelpUri error with the Get-Help proxy command. See the ReleaseNotes.txt download above for more information.CRM 2011 Navigation UI Record Counter: Navigation UI Record Counter v1.3.1: Fixes Bug with Chrome Bug with parseXml - reverted to good old indexOfVidCoder: 1.4.11 Beta: Added Hungarian translation, thanks to Brechler Zsolt. Update HandBrake core to SVN 5098. This update should fix crashes on some files. Updated the enqueue split button to fit in better with the active Windows theme. Updated presets to use x264 preset/profile/level.???: Cnblogs: CNBLOGSSandcastle Help File Builder: SHFB v1.9.6.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This new release contains bug fixes and feature enhancements. There are some potential breaking changes in this release as some features of the Help File Builder have been moved into...Electricity, Gas and Temperature Monitoring with Netduino Plus: V1.0.1 Netduino Plus Monitoring: This is the first stable release from the Netduino Plus Monitoring program. Bugfixing The code is enhanced at some places in respect to the V0.6.1 version There is a possibility to add multiple S0 meters Website for realtime display of data Website for configuring the Netduino Comments are welcome! Additions will not be made to this version. This is the first and last major Netduino Plus V1 release. The new development will take place with the Netduino Plus V2 development board in mi...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1116.8): [FIX] Fixed issue not displaying CRM system button images correctly (incorrect path in file VisualRibbonEditor.exe.config)My Expenses Windows Store LOB App Demo: My Expenses Version 1: This is version 1 of the MyExpenses Windows 8 line of business demo app. The app is written in XAML and C#. It calls a WCF service that works with a SQL Server database. The app uses the Callisto toolkit. You can get it at https://github.com/timheuer/callisto. The Expenses.sql file contains the SQL to create the Expenses database. The ExpensesWCFService.zip file contains the WCF service, also written in C#. You should create a WCF service. Create an Entity Framework model and point it to...BlackJumboDog: Ver5.7.4: 2012.12.13 Ver5.7.4 (1)Web???????、???????????????????????????????????????????VFPX: ssClasses A1.0: My initial release. See https://vfpx.codeplex.com/wikipage?title=ssClasses&referringTitle=Home for a brief description of what is inside this releaseLayered Architecture Solution Guidance (LASG): LASG 1.0.0.8 for Visual Studio 2012: PRE-REQUISITES Open GAX (Please install Oct 4, 2012 version) Microsoft® System CLR Types for Microsoft® SQL Server® 2012 Microsoft® SQL Server® 2012 Shared Management Objects Microsoft Enterprise Library 5.0 (for the generated code) Windows Azure SDK (for layered cloud applications) Silverlight 5 SDK (for Silverlight applications) THE RELEASE This release only works on Visual Studio 2012. Known Issue If you choose the Database project, the solution unfolding time will be slow....Fiskalizacija za developere: FiskalizacijaDev 2.0: Prva prava produkcijska verzija - Zakon je tu, ova je verzija uskladena sa trenutno važecom Tehnickom specifikacijom (v1.2. od 04.12.2012.) i spremna je za produkcijsko korištenje. Verzije iza ove ce ovisiti o naknadnim izmjenama Zakona i/ili Tehnicke specifikacije, odnosno, o eventualnim greškama u radu/zahtjevima community-a za novim feature-ima. Novosti u v2.0 su: - That assembly does not allow partially trusted callers (http://fiskalizacija.codeplex.com/workitem/699) - scheme IznosType...Bootstrap Helpers: Version 1: First releaseDirectX Tool Kit: December 11, 2012: December 11, 2012 Ex versions of DDSTextureLoader and WICTextureLoader Removed use of ATL's CComPtr in favor of WRL's ComPtr for all platforms to support VS Express editions Updated VS 2010 project for official 'property sheet' integration for Windows 8.0 SDK Minor fix to CommonStates for Feature Level 9.1 Tweaked AlphaTestEffect.cpp to work around ARM NEON compiler codegen bug Added dxguid.lib as a default library for Debug builds to resolve GUID link issuesArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.1 Final for 10.1: We are proud to announce the release of ArcGIS Editor for OpenStreetMap version 2.1. This download is compatible with ArcGIS 10.1, and includes setups for the Desktop Component, Desktop Component when 64 bit Background Geoprocessing is installed, and the Server Component. Important: if you already have ArcGIS Editor for OSM installed but want to install this new version, you will need to uninstall your previous version and then install this one. This release includes support for the ArcGIS 1...SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8.2: This release just contains some fixes that have been done since the last release. Plus, this is strong named as well. I apologize for the lack of updates but my free time is less these days.New ProjectsAzke: New: Azke is a portal developed with ASP.NET MVC and MySQL. Old: Azke is a portal developed with ASP.net and MySQL.BasicallyNot Visual Studio 2010 Extension: "BasicallyNot" is a new Visual Studio 2010 Extension. It is designed to "drastically improve your VB.Net productivity", and of course make you think happy thoughts about cookies.Beautiful Code: These are collections of random code that I have written, which I believe are "beautiful" in some respects (algorithm, usage of language features etc.).bjyxl2: a csla project for myself.Buscayasminas: Buscayasminas is an open source "Minesweeper" alike game totally written in DHTML (JavaScript, CSS and HTML) that uses mouse and keyboard optionally. This cross-platform and cross-browser game was tested under BeOS, Linux, *BSD, Windows and others.Check if Knowledge Base fix is installed script: A handy script that checks if a knowledge base fix is installed or not.cnbeta: CNBETA ???????CSDN ??: CSDN????????IT??DateTime Class: DateTime Class with several methods: -NumberOfBusinessDaysFrom -IsWorkDay -NextBusinessDay -PreviousBusinessDayECSE6770: An web application for Software Engineering at RPI Hartford.Google+ for Windows Phone 7: Nothing here now.Koch Curve in Silverlight: This program generates the Koch curve using the Silverlight browser plugin.LINUX????????: LINUX????????longchang capture project: this is the project of longchang traffic police capture.Luna Programming Editor: Luna Programming Editor aims to be a simple but very functional, open source programming editor for developers who want to be more productive.markgrovestest: Azure TestMerge PDF Files: This class implement the merge of PDF filesMetroWeb: Metro web is a new modern web browser that provide a different experience for web browsing it just show any traditional web site as a metro designed websiteMinecraft 1.4.4 -- Learning Java: But a simple attempt at modding Minecraft over two different computers not on the same network.Nhóm CKT11: chia s? code nhóm ckt11Orchard.DecoratorField: Orchard Module to add new fieldsPhysic Engine: Physic EnginePixentration: UIS projectPomidoro: Windows store app: timer, which can be used in the application of 'Pomodoro Technique'.ROBO XERO Control: ROBO XERO ??????????????????????。ruc: Buscar en RUC de Paraguay.Send Email Class: Generic class to send emailsServiceProcessManagement: ?????SPMSeven Zip Wrapper: This small application which allows to call 7zip to create an archive, but skip compression for specific file extensions, which are usually already compressed.SharpShell: SharpShell is a .NET class library that lets you build Windows Shell Extensions using C# or VB.Silverseed.Core: Silverseed.Core is planned to be a common library for a variety of tools I'm planning to write, one of which is already available at Codeplex: [url:RepoCop|http://repocop.codeplex.com].Sistemas De Seguridad: integrantes jorge sara marieta douglassSomeTD: someSourPresser: komprese zdrojoveho kodu, zakodovani do B64 a oznaceni jako "nekompiluj" pro CIL kompilator. ....nekdy uzitecne.....The Curse: The Curse UO. Helping make the runUO community better.TIF Manipulation (Image): Tif Image Manipulation (Split, GetPage, Save Tif format...)Tiny Image Filters: This is a basic image processing library for Windows Phone. It is going to help developing photo effect app on Windows Phone.TrainGroup: This LightSwitch Project aims to be a simple management tool for any kind of training groups.Windows 7 Logon Tweaker: A Simple Software Used To Change The Logon Background Of Windows 7Windows Disguiser: Windows Disguiser is a little program that allows to automatically disguise minimized windows into the system tray.Windows Forms Metro: This project aims to create a library of controls & templates of Windows 8 Metro Style UI elements, for those who still using/loves windows forms.WPF Open Dialog: WPF Open Dialog is a simple and free open file/folder dialog for WPF using MVVM pattern. ???: ????????

  Read the article

• Java JRE 1.6.0_65 Certified with Oracle E-Business Suite

  - by Steven Chan (Oracle Development)

  The latest Java Runtime Environment 1.6.0_65 (a.k.a. JRE 6u65-b14) and later updates on the JRE 6 codeline are now certified with Oracle E-Business Suite Release 11i and 12 for Windows-based desktop clients. Effects of new support dates on Java upgrades for EBS environments Support dates for the E-Business Suite and Java have changed.  Please review the sections below for more details: What does this mean for Oracle E-Business Suite users? Will EBS users be forced to upgrade to JRE 7 for Windows desktop clients? Will EBS users be forced to upgrade to JDK 7 for EBS application tier servers? All JRE 6 and 7 releases are certified with EBS upon release Our standard policy is that all E-Business Suite customers can apply all JRE updates to end-user desktops from JRE 1.6.0_03 and later updates on the 1.6 codeline, and from JRE 7u10 and later updates on the JRE 7 codeline.  We test all new JRE 1.6 and JRE 7 releases in parallel with the JRE development process, so all new JRE 1.6 and 7 releases are considered certified with the E-Business Suite on the same day that they're released by our Java team.  You do not need to wait for a certification announcement before applying new JRE 1.6 or JRE 7 releases to your EBS users' desktops. What's new in in this Java release?Java 6 is now available only via My Oracle Support for E-Business Suite users.  You can find links to this release, including Release Notes, documentation, and the actual Java downloads here: All Java SE Downloads on MOS (Note 1439822.1) 32-bit and 64-bit versions certified This certification includes both the 32-bit and 64-bit JRE versions. 32-bit JREs are certified on: Windows XP Service Pack 3 (SP3) Windows Vista Service Pack 1 (SP1) and Service Pack 2 (SP2) Windows 7 and Windows 7 Service Pack 1 (SP1) 64-bit JREs are certified only on 64-bit versions of Windows 7 and Windows 7 Service Pack 1 (SP1). Worried about the 'mismanaged session cookie' issue? No need to worry -- it's fixed.  To recap: JRE releases 1.6.0_18 through 1.6.0_22 had issues with mismanaging session cookies that affected some users in some circumstances. The fix for those issues was first included in JRE 1.6.0_23. These fixes will carry forward and continue to be fixed in all future JRE releases.  In other words, if you wish to avoid the mismanaged session cookie issue, you should apply any release after JRE 1.6.0_22. Implications of Java 6 End of Public Updates for EBS Users The Support Roadmap for Oracle Java is published here: Oracle Java SE Support Roadmap The latest updates to that page (as of Sept. 19, 2012) state (emphasis added): Java SE 6 End of Public Updates Notice After February 2013, Oracle will no longer post updates of Java SE 6 to its public download sites. Existing Java SE 6 downloads already posted as of February 2013 will remain accessible in the Java Archive on Oracle Technology Network. Developers and end-users are encouraged to update to more recent Java SE versions that remain available for public download. For enterprise customers, who need continued access to critical bug fixes and security fixes as well as general maintenance for Java SE 6 or older versions, long term support is available through Oracle Java SE Support . What does this mean for Oracle E-Business Suite users? EBS users fall under the category of "enterprise users" above.  Java is an integral part of the Oracle E-Business Suite technology stack, so EBS users will continue to receive Java SE 6 updates from February 2013 to the end of Java SE 6 Extended Support in June 2017. In other words, nothing changes for EBS users after February 2013.  EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6 until the end of Java SE 6 Extended Support in June 2017.  How can EBS customers obtain Java 6 updates after the public end-of-life? EBS customers can download Java 6 patches from My Oracle Support.  For a complete list of all Java SE patch numbers, see: All Java SE Downloads on MOS (Note 1439822.1) Will EBS users be forced to upgrade to JRE 7 for Windows desktop clients? This upgrade is highly recommended but remains optional while Java 6 is covered by Extended Support. Updates will be delivered via My Oracle Support, where you can continue to receive critical bug fixes and security fixes as well as general maintenance for JRE 6 desktop clients.  Java 6 is covered by Extended Support until June 2017.  All E-Business Suite customers must upgrade to JRE 7 by June 2017. Coexistence of JRE 6 and JRE 7 on Windows desktops The upgrade to JRE 7 is highly recommended for EBS users, but some users may need to run both JRE 6 and 7 on their Windows desktops for reasons unrelated to the E-Business Suite. Most EBS configurations with IE and Firefox use non-static versioning by default. JRE 7 will be invoked instead of JRE 6 if both are installed on a Windows desktop. For more details, see "Appendix B: Static vs. Non-static Versioning and Set Up Options" in Notes 290807.1 and 393931.1. Applying Updates to JRE 6 and JRE 7 to Windows desktops Auto-update will keep JRE 7 up-to-date for Windows users with JRE 7 installed. Auto-update will only keep JRE 7 up-to-date for Windows users with both JRE 6 and 7 installed.  JRE 6 users are strongly encouraged to apply the latest Critical Patch Updates as soon as possible after each release. The Jave SE CPUs will be available via My Oracle Support.  EBS users can find more information about JRE 6 and 7 updates here: Information Center: Installation & Configuration for Oracle Java SE (Note 1412103.2) The dates for future Java SE CPUs can be found on the Critical Patch Updates, Security Alerts and Third Party Bulletin.  An RSS feed is available on that site for those who would like to be kept up-to-date. What do Mac users need? Mac users running Mac OS 10.7 or 10.8 can run JRE 7 plug-ins.  See this article: EBS 12 certified with Mac OS X 10.7 and 10.8 with Safari 6 and JRE 7 Will EBS users be forced to upgrade to JDK 7 for EBS application tier servers? JRE is used for desktop clients.  JDK is used for application tier servers JDK upgrades for E-Business Suite application tier servers are highly recommended but currently remain optional while Java 6 is covered by Extended Support. Updates will be delivered via My Oracle Support, where you can continue to receive critical bug fixes and security fixes as well as general maintenance for JDK 6 for application tier servers.  Java SE 6 is covered by Extended Support until June 2017.  All EBS customers with application tier servers on Windows, Solaris, and Linux must upgrade to JDK 7 by June 2017. EBS customers running their application tier servers on other operating systems should check with their respective vendors for the support dates for those platforms. JDK 7 is certified with E-Business Suite 12.  See: Java (JDK) 7 Certified for E-Business Suite 12 Servers References Recommended Browsers for Oracle Applications 11i (Metalink Note 285218.1) Upgrading Sun JRE (Native Plug-in) with Oracle Applications 11i for Windows Clients (Metalink Note 290807.1) Recommended Browsers for Oracle Applications 12 (MetaLink Note 389422.1) Upgrading JRE Plugin with Oracle Applications R12 (MetaLink Note 393931.1) Related Articles Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23 Roundup: Oracle JInitiator 1.3 Desupported for EBS Customers in July 2009

  Read the article

• CodePlex Daily Summary for Monday, November 22, 2010

  CodePlex Daily Summary for Monday, November 22, 2010Popular ReleasesSQL Monitor: SQLMon 1.1: changes: 1.added sql job monitoring; 2.added settings save/loadASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.3.1 and demos: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form and Pager tested on mozilla, safari, chrome, opera, ie 9b/8/7/6DotSpatial: DotSpatial 11-21-2010: This release introduces the following Fixed bugs related to dispose, which caused issues when reordering layers in the legend Fixed bugs related to assigning categories where NULL values are in the fields New fast-acting resize using a bitmap "prediction" of what the final resize content will look like. ImageData.ReadBlock, ImageData.WriteBlock These allow direct file access for reading or writing a rectangular window. Bitmaps are used for holding the values. Removed the need to stor...Minemapper - dynamic mapping for Windows: Minemapper v0.1.0: Pan by: dragging the mouse using the buttons Zoom by: scrolling the mouse wheel using the buttons using the slider Night support Biome support Skylight support Direction support: East West Height slicingMDownloader: MDownloader-0.15.24.6966: Fixed Updater; Fixed minor bugs;WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.1: Version: 2.0.0.1 (Milestone 1): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...Smith Html Editor: Smith Html Editor V0.75: The first public release.MiniTwitter: 1.59: MiniTwitter 1.59 ???? ?? User Streams ????????????????? ?? ?????????????? ???????? ?????????????.NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.01: Added new extensions for - object.CountLoopsToNull Added new extensions for DateTime: - DateTime.IsWeekend - DateTime.AddWeeks Added new extensions for string: - string.Repeat - string.IsNumeric - string.ExtractDigits - string.ConcatWith - string.ToGuid - string.ToGuidSave Added new extensions for Exception: - Exception.GetOriginalException Added new extensions for Stream: - Stream.Write (overload) And other new methods ... Release as of dotnetpro 01/2011Code Sample from Microsoft: Visual Studio 2010 Code Samples 2010-11-19: Code samples for Visual Studio 2010Prism Training Kit: Prism Training Kit 4.0: Release NotesThis is an updated version of the Prism training Kit that targets Prism 4.0 and added labs for some of the new features of Prism 4.0. This release consists of a Training Kit with Labs on the following topics Modularity Dependency Injection Bootstrapper UI Composition Communication MEF Navigation Note: Take into account that this is a Beta version. If you find any bugs please report them in the Issue Tracker PrerequisitesVisual Studio 2010 Microsoft Word 2...Free language translator and file converter: Free Language Translator 2.2: Starting with version 2.0, the translator encountered a major redesign that uses MEF based plugins and .net 4.0. I've also fixed some bugs and added support for translating subtitles that can show up in video media players. Version 2.1 shows the context menu 'Translate' in Windows Explorer on right click. Version 2.2 has links to start the media file with its associated subtitle. Download the zip file and expand it in a temporary location on your local disk. At a minimum , you should uninstal...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.4 Released: Hi, Today we are releasing Visifire 3.6.4 with few bug fixes: * Multi-line Labels were getting clipped while exploding last DataPoint in Funnel and Pyramid chart. * ClosestPlotDistance property in Axis was not behaving as expected. * In DateTime Axis, Chart threw exception on mouse click over PlotArea if there were no DataPoints present in Chart. * ToolTip was not disappearing while changing the DataSource property of the DataSeries at real-time. * Chart threw exception ...Microsoft SQL Server Product Samples: Database: AdventureWorks 2008R2 SR1: Sample Databases for Microsoft SQL Server 2008R2 (SR1)This release is dedicated to the sample databases that ship for Microsoft SQL Server 2008R2. See Database Prerequisites for SQL Server 2008R2 for feature configurations required for installing the sample databases. See Installing SQL Server 2008R2 Databases for step by step installation instructions. The SR1 release contains minor bug fixes to the installer used to create the sample databases. There are no changes to the databases them...VidCoder: 0.7.2: Fixed duplicated subtitles when running multiple encodes off of the same title.Craig's Utility Library: Craig's Utility Library Code 2.0: This update contains a number of changes, added functionality, and bug fixes: Added transaction support to SQLHelper. Added linked/embedded resource ability to EmailSender. Updated List to take into account new functions. Added better support for MAC address in WMI classes. Fixed Parsing in Reflection class when dealing with sub classes. Fixed bug in SQLHelper when replacing the Command that is a select after doing a select. Fixed issue in SQL Server helper with regard to generati...MFCMAPI: November 2010 Release: Build: 6.0.0.1023 Full release notes at SGriffin's blog. If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. The 64 bit build will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit build, regardless of the operating system. Facebook BadgeDotNetNuke® Community Edition: 05.06.00: Major HighlightsAdded automatic portal alias creation for single portal installs Updated the file manager upload page to allow user to upload multiple files without returning to the file manager page. Fixed issue with Event Log Email Notifications. Fixed issue where Telerik HTML Editor was unable to upload files to secure or database folder. Fixed issue where registration page is not set correctly during an upgrade. Fixed issue where Sendmail stripped HTML and Links from emails...mVu Mobile Viewer: mVu Mobile Viewer 0.7.10.0: Tube8 fix.EPPlus-Create advanced Excel 2007 spreadsheets on the server: EPPlus 2.8.0.1: EPPlus-Create advanced Excel 2007 spreadsheets on the serverNew Features Improved chart support Different chart-types series on the same chart Support for secondary axis and a lot of new properties Better styling Encryption and Workbook protection Table support Import csv files Array formulas ...and a lot of bugfixesNew Projects.NET 4 Workflow Activities for Citrix: .NET 4 based workflow activities targeting the Citrix infrastructure.Age calculator: It calculates the age of a person in days on specification of date of birth.Another Azure Demo Project: An Azure demo project - based on the one we (Johan Danforth and Dag König) showed on the Swedish Azure Summit.ASP.NET Layered Web Application: N-Layered Web Applications with ASP.NET based on the article by Imar Spaanjaars.Binzlog: Donet ????。Build Solution: Buid Visual Studio applications with .Net code.CondominioOnline: Projeto para o desenvolvimento colaborativo dos diagramas de desenvolvimento.Create Dynamic UI with WPF: Create Dynamic UI with WPFDNN Fanbox: dot net nuke plugin facebook fanboxDNN Tweet: DNN Tweet is a twitter plugin for DotnetNuke DotNetNuke Notes: dnnNotes allows you to create simple notes that are stored on your DotNetNuke site.Easy Login PHP Script: Give your site a professional looking Members Area with this completely FREE and easy-to-use PHP script! Developed in PHP and uses MySQL as a database backend. Go on, click here, you know you want to! :DFind Nigerian Traditional Fashion Styles: NaijaTradStyles is a social network for Nigerians all over the world to promote the Nigerian economy, designs and cultures, fashion designers and individuals. This site allows users to share fashion ideas, activities, events, and interests within their individual networks. The GreenArrow: Just a simple mark-locate-click automation tool by comparing graphic pieces. GreenArrow makes it easier for automation script writer to handle UI elements which cannot be located by normal methods, like keyword or classid. Libero API for Fusion Charts in ASP.Net: Libero.FusionChartsAPI is made for Asp.Net (Webforms and MVC) developers to make easier to implement Fusion Charts in their projects. It is developed in framework .Net 4 (but supports framework 3.5) to target ASP.Net projects. Minemapper - dynamic mapping for Windows: Minemapper is an interactive, dynamic mapper for Minecraft. It uses mcmap to generate small map image tiles, then lets you pan and zoom around, quickly generating new tiles as needed.MoodleAzure: Enable Moodle 1.9.9 to run on Windows Azure and SQL AzureOpalis Active Directory Extension: A Opalis Integration Pack Project for Active Directory Integration. Done with C# Directory Services.Quick Finger SDK: Quick Finger SDK helps you to build a wide range of applications to use fingerprint recognition. Quick Finger SDK makes it easier for developers to integrate fingerprint recognition into their software. It's developed in Visual C++. Regex Batch Replacer (Multi-File): Regex Batch Replacer uses regular expression to find and replace text in multiple files.RiverRaid X: A clone of the classic Atari 2600 arcade game, River Raid. Uses XNA 4.0 and Neat game engine (http://neat.codeplex.com)SharePoint Commander: SharePoint 2010 administrative tool for developers and administrators.StreamerMatch: A tool for streamers, focused at Starcraft II at the moment.Tab Web Part: This solution is used to present the WebParts in a tab like user interface. It is tested on a SharePoint 2010 sandboxed solution. With this solution, all the WebParts added in a particular zone will appear in a tab kind of interface in the design mode. The javascript transformsTomato: XNA-based rendering middleware.UnicornObjects: todoVina: VinaWPF Photo/Image Manager: A WPF playground for many projects, including an image viewer, filters, image modification, photo organization, etc.WXQCW: wxqcw news platformYobbo Guitar: Yobbo guitar is a web application developed in ASP.NET that allows users to share guitar songs and chord progressions.

  Read the article

• Server Memory with Magento

  - by Mohamed Elgharabawy

  I have a cloud server with the following specifications: 2vCPUs 4G RAM 160GB Disk Space Network 400Mb/s System Image: Ubuntu 12.04 LTS I am only running Magento CE 1.7.0.2 on this server. Nothing else. Usually, the server has a loading time of 4-5 seconds. Recently, this has dropped to over 30 seconds and sometimes the server just goes away and I get HTTP error reports to my email stating that HTTP requests took more than 20000ms. Running top command and sorting them returns the following: top - 15:29:07 up 3:40, 1 user, load average: 28.59, 25.95, 22.91 Tasks: 112 total, 30 running, 82 sleeping, 0 stopped, 0 zombie Cpu(s): 90.2%us, 9.3%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.3%si, 0.2%st PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 31901 www-data 20 0 360m 71m 5840 R 7 1.8 1:39.51 apache2 32084 www-data 20 0 362m 72m 5548 R 7 1.8 1:31.56 apache2 32089 www-data 20 0 348m 59m 5660 R 7 1.5 1:41.74 apache2 32295 www-data 20 0 343m 54m 5532 R 7 1.4 2:00.78 apache2 32303 www-data 20 0 354m 65m 5260 R 7 1.6 1:38.76 apache2 32304 www-data 20 0 346m 56m 5544 R 7 1.4 1:41.26 apache2 32305 www-data 20 0 348m 59m 5640 R 7 1.5 1:50.11 apache2 32291 www-data 20 0 358m 69m 5256 R 6 1.7 1:44.26 apache2 32517 www-data 20 0 345m 56m 5532 R 6 1.4 1:45.56 apache2 30473 www-data 20 0 355m 66m 5680 R 6 1.7 2:00.05 apache2 32093 www-data 20 0 352m 63m 5848 R 6 1.6 1:53.23 apache2 32302 www-data 20 0 345m 56m 5512 R 6 1.4 1:55.87 apache2 32433 www-data 20 0 346m 57m 5500 S 6 1.4 1:31.58 apache2 32638 www-data 20 0 354m 65m 5508 R 6 1.6 1:36.59 apache2 32230 www-data 20 0 347m 57m 5524 R 6 1.4 1:33.96 apache2 32231 www-data 20 0 355m 66m 5512 R 6 1.7 1:37.47 apache2 32233 www-data 20 0 354m 64m 6032 R 6 1.6 1:59.74 apache2 32300 www-data 20 0 355m 66m 5672 R 6 1.7 1:43.76 apache2 32510 www-data 20 0 347m 58m 5512 R 6 1.5 1:42.54 apache2 32521 www-data 20 0 348m 59m 5508 R 6 1.5 1:47.99 apache2 32639 www-data 20 0 344m 55m 5512 R 6 1.4 1:34.25 apache2 32083 www-data 20 0 345m 56m 5696 R 5 1.4 1:59.42 apache2 32085 www-data 20 0 347m 58m 5692 R 5 1.5 1:42.29 apache2 32293 www-data 20 0 353m 64m 5676 R 5 1.6 1:52.73 apache2 32301 www-data 20 0 348m 59m 5564 R 5 1.5 1:49.63 apache2 32528 www-data 20 0 351m 62m 5520 R 5 1.6 1:36.11 apache2 31523 mysql 20 0 3460m 576m 8288 S 5 14.4 2:06.91 mysqld 32002 www-data 20 0 345m 55m 5512 R 5 1.4 2:01.88 apache2 32080 www-data 20 0 357m 68m 5512 S 5 1.7 1:31.30 apache2 32163 www-data 20 0 347m 58m 5512 S 5 1.5 1:58.68 apache2 32509 www-data 20 0 345m 56m 5504 R 5 1.4 1:49.54 apache2 32306 www-data 20 0 358m 68m 5504 S 4 1.7 1:53.29 apache2 32165 www-data 20 0 344m 55m 5524 S 4 1.4 1:40.71 apache2 32640 www-data 20 0 345m 56m 5528 R 4 1.4 1:36.49 apache2 31888 www-data 20 0 359m 70m 5664 R 4 1.8 1:57.07 apache2 32511 www-data 20 0 357m 67m 5512 S 3 1.7 1:47.00 apache2 32054 www-data 20 0 357m 68m 5660 S 2 1.7 1:53.10 apache2 1 root 20 0 24452 2276 1232 S 0 0.1 0:01.58 init Moreover, running free -m returns the following: total used free shared buffers cached Mem: 4003 3919 83 0 118 901 -/+ buffers/cache: 2899 1103 Swap: 0 0 0 To investigate this further, I have installed apache buddy, it recommeneded that I need to reduce the maxclient connections. Which I did. I also installed MysqlTuner and it suggests that I need to set my innodb_buffer_pool_size to = 3.0G. However, I cannot do that, since the whole memory is 4G. Here is the output from apache buddy: ### GENERAL REPORT ### Settings considered for this report: Your server's physical RAM: 4003MB Apache's MaxClients directive: 40 Apache MPM Model: prefork Largest Apache process (by memory): 73.77MB [ OK ] Your MaxClients setting is within an acceptable range. Max potential memory usage: 2950.8 MB Percentage of RAM allocated to Apache 73.72 % And this is the output of MySQLTuner: -------- Performance Metrics ------------------------------------------------- [--] Up for: 47m 22s (675K q [237.552 qps], 12K conn, TX: 1B, RX: 300M) [--] Reads / Writes: 45% / 55% [--] Total buffers: 2.1G global + 2.7M per thread (151 max threads) [OK] Maximum possible memory usage: 2.5G (64% of installed RAM) [OK] Slow queries: 0% (0/675K) [OK] Highest usage of available connections: 26% (40/151) [OK] Key buffer size / total MyISAM indexes: 36.0M/18.7M [OK] Key buffer hit rate: 100.0% (245K cached / 105 reads) [OK] Query cache efficiency: 92.5% (500K cached / 541K selects) [!!] Query cache prunes per day: 302886 [OK] Sorts requiring temporary tables: 0% (1 temp sorts / 15K sorts) [!!] Joins performed without indexes: 12135 [OK] Temporary tables created on disk: 25% (8K on disk / 32K total) [OK] Thread cache hit rate: 90% (1K created / 12K connections) [!!] Table cache hit rate: 17% (400 open / 2K opened) [OK] Open file limit used: 12% (123/1K) [OK] Table locks acquired immediately: 100% (196K immediate / 196K locks) [!!] InnoDB buffer pool / data size: 2.0G/3.5G [OK] InnoDB log waits: 0 -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Enable the slow query log to troubleshoot bad queries Adjust your join queries to always utilize indexes Increase table_cache gradually to avoid file descriptor limits Read this before increasing table_cache over 64: http://bit.ly/1mi7c4C Variables to adjust: query_cache_size ( 64M) join_buffer_size ( 128.0K, or always use indexes with joins) table_cache ( 400) innodb_buffer_pool_size (= 3G) Last but not least, the server still has more than 60% of free disk space. Now, based on the above, I have few questions: Are these numbers normal? Do they make sense? Do I need to upgrade the server? If I don't need to upgrade and my configuration is not correct, how do I optimize it?

  Read the article

< Previous Page | 757 758 759 760 761 762 763 764 765 766 767 768  | Next Page >