binary search trees - Page 764

How to Assign a Static IP Address in XP, Vista, or Windows 7

- by Mysticgeek

When organizing your home network it’s easier to assign each computer it’s own IP address than using DHCP. Here we will take a look at doing it in XP, Vista, and Windows 7. If you have a home network with several computes and devices, it’s a good idea to assign each of them a specific address. If you use DHCP (Dynamic Host Configuration Protocol), each computer will request and be assigned an address every time it’s booted up. When you have to do troubleshooting on your network, it’s annoying going to each machine to figure out what IP they have. Using Static IPs prevents address conflicts between devices and allows you to manage them more easily. Assigning IPs to Windows is essentially the same process, but getting to where you need to be varies between each version. Windows 7 To change the computer’s IP address in Windows 7, type network and sharing into the Search box in the Start Menu and select Network and Sharing Center when it comes up. Then when the Network and Sharing Center opens, click on Change adapter settings. Right-click on your local adapter and select Properties. In the Local Area Connection Properties window highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button. Now select the radio button Use the following IP address and enter in the correct IP, Subnet mask, and Default gateway that corresponds with your network setup. Then enter your Preferred and Alternate DNS server addresses. Here we’re on a home network and using a simple Class C network configuration and Google DNS. Check Validate settings upon exit so Windows can find any problems with the addresses you entered. When you’re finished click OK. Now close out of the Local Area Connections Properties window. Windows 7 will run network diagnostics and verify the connection is good. Here we had no problems with it, but if you did, you could run the network troubleshooting wizard. Now you can open the command prompt and do an ipconfig to see the network adapter settings have been successfully changed. Windows Vista Changing your IP from DHCP to a Static address in Vista is similar to Windows 7, but getting to the correct location is a bit different. Open the Start Menu, right-click on Network, and select Properties. The Network and Sharing Center opens…click on Manage network connections. Right-click on the network adapter you want to assign an IP address and click Properties. Highlight Internet Protocol Version 4 (TCP/IPv4) then click the Properties button. Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you’re finished click OK. You’ll need to close out of Local Area Connection Properties for the settings to go into effect. Open the Command Prompt and do an ipconfig to verify the changes were successful. Windows XP In this example we’re using XP SP3 Media Center Edition and changing the IP address of the Wireless adapter. To set a Static IP in XP right-click on My Network Places and select Properties. Right-click on the adapter you want to set the IP for and select Properties. Highlight Internet Protocol (TCP/IP) and click the Properties button. Now change the IP, Subnet mask, Default Gateway, and DNS Server Addresses. When you’re finished click OK. You will need to close out of the Network Connection Properties screen before the changes go into effect. Again you can verify the settings by doing an ipconfig in the command prompt. In case you’re not sure how to do this, click on Start then Run. In the Run box type in cmd and click OK. Then at the prompt type in ipconfig and hit Enter. This will show the IP address for the network adapter you changed. If you have a small office or home network, assigning each computer a specific IP address makes it a lot easier to manage and troubleshoot network connection problems. Similar Articles Productive Geek Tips Change Ubuntu Desktop from DHCP to a Static IP AddressChange Ubuntu Server from DHCP to a Static IP AddressVista Breadcrumbs for Windows XPCreate a Shortcut or Hotkey for the Safely Remove Hardware DialogCreate a Shortcut or Hotkey to Eject the CD/DVD Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Nice Websites To Watch TV Shows Online 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos

Read the article

Ask How-To Geek: Dropbox in the Start Menu, Understanding Symlinks, and Ripping TV Series DVDs

- by Jason Fitzpatrick

This week we take a look at how to incorporate Dropbox into your Windows Start Menu, understanding and using symbolic links, and how to rip your TV series DVDs right to unique and high-quality episode files. Once a week we dip into our reader mailbag and help readers solve their problems, sharing the useful solutions with you in the process. Read on to see our fixes for this week’s reader dilemmas. Add Drobox to Your Start Menu Dear How-To Geek, I use Dropbox all the time and would like to add it right onto my start menu along side the other major shortcuts like Documents, Pictures, etc. It seems like adding Dropbox into the menu should be part of the Dropbox installation package! Sincerely, Dropboxing in Des Moines Dear Dropboxing, We agree, it would be a nice installation option. As it stands you’re going to have to do a little simple hacking to get Dropbox nestled neatly into your start menu. The hack isn’t super elegant but when you’re done you’ll have the link you want and it’ll look like it was there all along. Check out this step-by-step guide here in order to take an existing Library shortcut and rework it to be a Dropbox link. Understanding and Using Symbolic Links Dear How-To Geek, I was talking to a coworker the other day about an issue I’d been having with a media center application I’m running. He suggested using symbolic links to better organize my media and make it easier for the application to access my collection. I had no idea what he was talking about and never got a chance to bug him about it later. Can you clear up this whole symbolic links business for me? I’ve been using computers for years and I’ve never even heard of it! Sincerely, Symbolic Who? Dear Symbolic, Symbolic links aren’t commonly used by many Windows users which is why you likely haven’t run into the concept. Symbolic links are essentially supercharged shortcuts—the newly introduced Windows library system is really just a type of symbolic link system. You can use symbolic links to do all sorts of neat stuff like link folders to your Dropbox folder, organize media, and more. The concept of symbolic links is pretty simple but the execution can be really tricky. We’d suggest reading over our guide to creating symbolic links in Windows 7, Windows XP, and Ubunutu to get a clearer idea what you’re getting into. Rip Your TV DVDs into Handy Episode Files Dear How-To Geek, My wife got me an iPod for Christmas and I still haven’t got around to filling it up. I have tons of entire TV show seasons on DVD and would like to get them on the iPod but I have absolutely no idea where to start. How do I get the shows off the discs? I thought it would be as easy to import the TV shows into iTunes as it is to import tracks off a CD but I was totally wrong. I tried downloading some applications to rip them but those didn’t work at all. Very frustrating! Surely there is an easy and/or automated way to do this, right? Sincerely, Free My DVDs Dear DVDs, Oh man is this a frustration we can relate to. It’s inordinately difficult to get movies and TV shows off physical media and into digital (and portable media player-friendly) formats. There are a multitude of ways to rip DVDs and quite a few applications out there (some good, some mediocre, and some outright malware). We’d recommend a two-part punch to solve your ripping woes. You’ll need a copy of DVDFab to strip away the protections on the discs and rip the disc and Handbrake to load the disc image and convert the files. It’s not quite as smooth as the CD-to-iTunes workflow but it’s still pretty easy. Check out all the steps and settings you’ll want to toggle here. Have a question you want to put before the How-To Geek staff? Shoot us an email at [email protected] and then keep an eye out for a solution in the Ask How-To Geek column. Latest Features How-To Geek ETC Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware How to Change the Default Application for Android Tasks Stop Believing TV’s Lies: The Real Truth About "Enhancing" Images The How-To Geek Valentine’s Day Gift Guide Inspire Geek Love with These Hilarious Geek Valentines Google’s New Personal Blocklist Extension Kills Search Engine Spam KeyCounter Tracks Your Keystrokes and Mouse Clicks Add Custom LED Ambient Lighting to Your PC or Media Center The Trackor Monitors Amazon Prices; Integrates with Chrome, Firefox, and Safari Four Awesome TRON Legacy Themes for Chrome and Iron Anger is Illogical – Old School Style Instructional Video [Star Trek Mashup]

Read the article

Building a database installer with WiX, datadude and Visual Studio 2010

- by jamiet

Today I have been using Windows Installer XML (WiX) to build an installer (.msi file) that would install a SQL Server database on a server of my choosing; the source code for that database lives in datadude (a tool which you may know by one of quite a few other names). The basis for this work was a most excellent blog post by Duke Kamstra entitled Implementing a WIX installer that calls the GDR version of VSDBCMD.EXE which coves the delicate intricacies of doing this – particularly how to call Vsdbcmd.exe in a CustomAction. Unfortunately there are a couple of things wrong with Duke’s post: Searching for “datadude wix” didn’t turn it up in the first page of search results and hence it took me a long time to find it. And I knew that it existed. If someone else were after a post on using WiX with datadude its likely that they would never have come across Duke’s post and that would be a great shame because its the definitive post on the matter. It was written in October 2009 and had not been updated for Visual Studio 2010. Well, this blog post is an attempt to solve those problems. Hopefully I’ve solved the first one just by following a few of my blogging SEO tips while writing this blog post, in the rest of it I will explain how I took Duke’s code and updated it to work in Visual Studio 2010. If you need to build a database installer using WiX, datadude and Visual Studio 2010 then you still need to follow Duke’s blog post so go and do that now. Below are the amendments that I made that enabled the project to get built in Visual Studio 2010: In VS2010 datadude’s output files have changed from being called Database.<suffix> to <ProjectName>_Database.<suffix>. Duke’s code was referencing the old file name formats. Duke used $(var.SolutionDir) and relative paths to point to datadude artefacts I have replaced these with Votive Project References http://wix.sourceforge.net/manual-wix3/votive_project_references.htm I commented out all references to MicrosoftSqlTypesDbschema in DatabaseArtifacts.wxi. I don't think this is produced in VS2010 (I may be wrong about that but it wasn't in the output from my project) Similarly I commented out component MicrosoftSqlTypesDbschema in VsdbcmdArtifacts.wxi. It wasn't where Duke's code said it should have been so am assuming/hoping it isn't needed. Duke's ?define block to work out appropriate SrcArchPath actually wasn't working for me (i.e. <?if $(var.Platform)=x64 ?> was evaluating to false) so I just took out the conditional stuff and declared the path explicitly to the “Program Files (x86)” path. The old code is still there though if you need to put it back. None of the <RegistrySearch> stuff is needed for VS2010 - so I commented it all out! Changed to use /manifest option rather than /model option on vsdbcmd.exe command-line. Personal preference is all! Added a new component in order to bundle along the vsdbcmd.exe.config file Made the install of the Custom Action dependent on the relevant feature being selected for install. This one is actually really important – deselecting the database feature for installation does not, by default, stop the CustomAction from executing and so would cause an error - so that scenario needs to be catered for I have made my amended solution available for download at: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.zip It contains two projects: the WiX project and the datadude project that is the source to be deployed (for demo purposes it only contains one table). I have also made the .msi available although in order that it gets through file blockers I changed the name from InstallMyDatabase.msi to InstallMyDatabase.ms_ – simply rename the file back once you have downloaded it from: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.ms%5E_ .You can try it out for yourself – the only thing it does is dump the files into %Program Files%\MyDatabase and uses them to install a database onto a server of your choosing with a name of your choosing - no damaging side-affects. I will caveat this by saying “it works on my machine” and, not having access to a plethora of different machines, I haven’t tested it anywhere else. One potential issue that I know of is that Vsdbcmd.exe has a dependency on SQL Server CE although if you have SQL Server tools or Visual Studio installed you should be fine. Unfortunately its not possible to bundle along the SQL Server CE installer in the .msi because Windows will not allow you to call one installer from inside another – the recommended way to get around this problem is to build a bootstrapper to bundle the whole lot together but doing that is outside the scope of this blog post. If you discover any other issues then please let me know. Here are the screenshots from the installer: And once installed…. Hope this is useful! @jamiet

Read the article

MySQL 5.5 brings in new ways to authenticate users

- by Georgi Kodinov

Ever wanted to use your server's OS for authenticating MySQL users ? Or the corporate LDAP repository ? Unfortunately options like the above are plentiful nowadays. And providing hard-coded support for protocol X or service Y is not the best possible idea. MySQL 5.5 has taken the step into the right direction by providing an infrastructure allowing one to make the server understand different authentication protocols by creating a set of simple plugins (one for the client and one for the server). So now you can easily extend MySQL to search for and authenticate users in your favorite user directory. In fact the API supplied is so versatile that we took the possibility to re-design the current "native" authentication mechanism into a built-in always-on plugin ! OK, let me give you an example: Imagine we have a bunch of users defined in your OS, e.g. we have a user joro with his respective password. And we have a MySQL instance running on the same computer. It would not be unexpected to need to let joro access and/or modify MySQL data. The first step is to define him as a MySQL user. And there's a problem right there : MySQL's CREATE USER joro@localhost IDENTIFIED BY 'joros_password' statement needs a password. And this is a password in no way related to the password that joro have set up in the OS. What's worse : if joro changes his OS password this will in no way be reflected in MySQL. So he'll need to change his MySQL password in a separate step. Not very convenient, specially when you have a lot of users. This is a laborious setup for joro's DBA as well : he'll have to disable his access in both MySQL and the OS should he decides that joro's out of the "nice" list. Now mysql 5.5 to the rescue: Imagine that the smart DBA has created a MySQL server plugin that will check if the name of the user logging in is a valid and enabled OS name and if the password supplied to the mysql client matches the OS and has called this plugin 'auth_os'. Now all that's left to do is to define joro as a MySQL user that will be authenticated externally. This is done by the following command : CREATE USER 'joro'@'localhost' IDENTIFIED WITH 'auth_os'; Now joro can login to MySQL using his current OS password. Note : joro is still a valid MySQL user, so you can grant privileges to him just like you would for all other users. What's better: you can have users that authenticate using different mechanisms in the same server. So you can e.g. safely experiment with external authentication for selected users while keeping your current user base operational. What happens under the hood when joro logs in ? The server will find out by the user definition that it needs to use a non-default authentication and will ask the client to "switch" to using the appropriate client-side plugin (if of course the client is not already using it). If the client can't do this (e.g. because it's an old client or doesn't have the necessary plugin available) the server will reject the login. Otherwise the server will let the server-side plugin decide (while possibly talking to the client side plugin and the OS user directory) if this is a valid login or not. If it is the login process will continue as usual, while if it's not the login will get rejected. There's a lot more that MySQL 5.5 can do for you than just the simple case above. Stay tuned for more advanced use cases like mapping groups of external users to a single MySQL user (so you won't have to have 1-to-1 mapping between your external user directory and your mysql user repository) or ways to control the process as a DBA. Or you can simply skip ahead and read the relevant topics from MySQL's excellent online documentation. Or take a look at the example plugins in plugin/auth. Or take a look at the test suite in mysql-test/t/plugin_auth.test. Changelog entry: http://dev.mysql.com/doc/refman/5.5/en/news-5-5-7.html Primary new sections: Pluggable authentication Proxy users Client plugin C API functions Revised sections: New PROXY privilege New proxies_priv grant table Passwords might be external New external_user and proxy_user system variables New --default-auth and --plugin-dir mysql options New MYSQL_DEFAULT_AUTH and MYSQL_PLUGIN_DIR options for mysql_options() CREATE USER has IDENTIFIED WITH clause to specify auth plugin GRANT has PROXY privilege, IDENTIFIED WITH clause to specify auth plugin The data structure for writing client plugins

Read the article

How to Play FLAC Files in Windows 7 Media Center & Player

- by Mysticgeek

An annoyance for music lovers who enjoy FLAC format, is there’s no native support for WMP or WMC. If you’re a music enthusiast who prefers FLAC format, we’ll look at adding support to Windows 7 Media Center and Player. For the following article we are using Windows 7 Home Premium 32-bit edition. Download and Install madFLAC v1.8 The first thing we need to do is download and install the madFLAC v1.8 decoder (link below). Just unzip the file and run install.bat… You’ll get a message that it has been successfully registered, click Ok. To verify everything is working, open up one of your FLAC files with WMP, and you’ll get the following message. Check the box Don’t ask me again for this extension and click Yes. Now Media Player should play the track you’ve chosen. Delete Current Music Library But what if you want to add your entire collection of FLAC files to the Library? If you already have it set up as your default music player, unfortunately we need to remove the current library and delete the database. The best way to manage the music library in Windows 7 is via WMP 12. Since we don’t want to delete songs from the computer we need to Open WMP, press “Alt+T” and navigate to Tools \ Options \ Library. Now uncheck the box Delete files from computer when deleted from library and click Ok. Now in your Library click “Ctrl + A” to highlight all of the songs in the Library, then hit the “Delete” key. If you have a lot of songs in your library (like on our system) you’ll see the following dialog box while it collects all of the information. After all of the data is collected, make sure the radio button next to Delete from library only is marked and click Ok. Again you’ll see the Working progress window while the songs are deleted. Deleting Current Database Now we need to make sure we’re starting out fresh. Close out of Media Player, then we’ll basically follow the same directions The Geek pointed out for fixing the WMP Library. Click on Start and type in services.msc into the search box and hit Enter. Now scroll down and stop the service named Windows Media Player Network Sharing Service. Now, navigate to the following directory and the main file to delete CurrentDatabase_372.wmdb %USERPROFILE%\Local Settings\Application Data\Microsoft\Media Player\ Again, the main file to delete is CurrentDatabase_372.wmdb, though if you want, you can delete them all. If you’re uneasy about deleting these files, make sure to back them up first. Now after you restart WMP you can begin adding your FLAC files. For those of us with large collections, it’s extremely annoying to see WMP try to pick up all of your media by default. To delete the other directories go to Organize \ Manage Libraries then open the directories you want to remove. For example here we’re removing the default libraries it tries to check for music. Remove the directories you don’t want it to gather contents from in each of the categories. We removed all of the other collections and only added the FLAC music directory from our home server. SoftPointer Tag Support Plugin Even though we were able to get FLAC files to play in WMP and WMC at this point, there’s another utility from SoftPointer to add. It enables FLAC (and other file formats) to be picked up in the library much easier. It has a long name but is effective –M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center (link below). Just install it by accepting the defaults, and you’ll be glad you did. After installing it, and re-launching Media Player, give it some time to collect all of the data from your FLAC directory…it can take a while. In fact, if your collection is huge, just walk away and let it do its thing. If you try to use it right away, WMP slows down considerably while updating the library. Once the library is setup you’ll be able to play your FLAC tunes in Windows 7 Media Center as well and Windows Media Player 12. Album Art One caveat is that some of our albums didn’t show any cover art. But we were usually able to get it by right-clicking the album and selecting Find album info. Then confirming the album information is correct… Conclusion Although this seems like several steps to go through to play FLAC files in Windows 7 Media Center and Player, it seems to work really well after it’s set up. We haven’t tried this with a 64-bit machine, but the process should be similar, but you might want to make sure the codecs you use are 64-bit. We’re sure there are other methods out there that some of you use, and if so leave us a comment and tell us about it. Download madFlac V1.8 M4a/FLAC/Ogg/Ape/Mpc Tag Support Plugin for Media Player and Media Center from SoftPointer Similar Articles Productive Geek Tips How to Play .OGM Video Files in Windows VistaFixing When Windows Media Player Library Won’t Let You Add FilesUsing Netflix Watchnow in Windows Vista Media Center (Gmedia)Kantaris is a Unique Media Player Based on VLCEasily Change Audio File Formats with XRECODE TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data Geek Parents – Did you try Parental Controls in Windows 7?

Read the article

How to Modify Data Security in Fusion Applications

- by Elie Wazen

The reference implementation in Fusion Applications is designed with built-in data security on business objects that implement the most common business practices. For example, the “Sales Representative” job has the following two data security rules implemented on an “Opportunity” to restrict the list of Opportunities that are visible to an Sales Representative: Can view all the Opportunities where they are a member of the Opportunity Team Can view all the Opportunities where they are a resource of a territory in the Opportunity territory team While the above conditions may represent the most common access requirements of an Opportunity, some customers may have additional access constraints. This blog post explains: How to discover the data security implemented in Fusion Applications. How to customize data security Illustrative example. a.) How to discover seeded data security definitions The Security Reference Manuals explain the Function and Data Security implemented on each job role. Security Reference Manuals are available on Oracle Enterprise Repository for Oracle Fusion Applications. The following is a snap shot of the security documented for the “Sales Representative” Job. The two data security policies define the list of Opportunities a Sales Representative can view. Here is a sample of data security policies on an Opportunity. Business Object Policy Description Policy Store Implementation Opportunity A Sales Representative can view opportunity where they are a territory resource in the opportunity territory team Role: Opportunity Territory Resource Duty Privilege: View Opportunity (Data) Resource: Opportunity A Sales Representative can view opportunity where they are an opportunity sales team member with view, edit, or full access Role: Opportunity Sales Representative Duty Privilege: View Opportunity (Data) Resource: Opportunity Description of Columns Column Name Description Policy Description Explains the data filters that are implemented as a SQL Where Clause in a Data Security Grant Policy Store Implementation Provides the implementation details of the Data Security Grant for this policy. In this example the Opportunities listed for a “Sales Representative” job role are derived from a combination of two grants defined on two separate duty roles at are inherited by the Sales Representative job role. b.) How to customize data security Requirement 1: Opportunities should be viewed only by members of the opportunity team and not by all the members of all the territories on the opportunity. Solution: Remove the role “Opportunity Territory Resource Duty” from the hierarchy of the “Sales Representative” job role. Best Practice: Do not modify the seeded role hierarchy. Create a custom “Sales Representative” job role and build the role hierarchy with the seeded duty roles. Requirement 2: Opportunities must be more restrictive based on a custom attribute that identifies if a Opportunity is confidential or not. Confidential Opportunities must be visible only the owner of the Opportunity. Solution: Modify the (2) data security policy in the above example as follows: A Sales Representative can view opportunity where they are a territory resource in the opportunity territory team and the opportunity is not confidential. Implementation of this policy is more invasive. The seeded SQL where clause of the data security grant on “Opportunity Territory Resource Duty” has to be modified and the condition that checks for the confidential flag must be added. Best Practice: Do not modify the seeded grant. Create a new grant with the modified condition. End Date the seeded grant. c.) Illustrative Example (Implementing Requirement 2) A data security policy contains the following components: Role Object Instance Set Action Of the above four components, the Role and Instance Set are the only components that are customizable. Object and Actions for that object are seed data and cannot be modified. To customize a seeded policy, “A Sales Representative can view opportunity where they are a territory resource in the opportunity territory team”, Find the seeded policy Identify the Role, Object, Instance Set and Action components of the policy Create a new custom instance set based on the seeded instance set. End Date the seeded policies Create a new data security policy with custom instance set c-1: Find the seeded policy Step 1: 1. Find the Role 2. Open 3. Find Policies Step 2: Click on the Data Security Tab Sort by “Resource Name” Find all the policies with the “Condition” as “where they are a territory resource in the opportunity territory team” In this example, we can see there are 5 policies for “Opportunity Territory Resource Duty” on Opportunity object. Step 3: Now that we know the policy details, we need to create new instance set with the custom condition. All instance sets are linked to the object. Find the object using global search option. Open it and click on “condition” tab Sort by Display name Find the Instance set Edit the instance set and copy the “SQL Predicate” to a notepad. Create a new instance set with the modified SQL Predicate from above by clicking on the icon as shown below. Step 4: End date the seeded data security policies on the duty role and create new policies with your custom instance set. Repeat the navigation in step Edit each of the 5 policies and end date them 3. Create new custom policies with the same information as the seeded policies in the “General Information”, “Roles” and “Action” tabs. 4. In the “Rules” tab, please pick the new instance set that was created in Step 3.

Read the article

CodePlex Daily Summary for Tuesday, March 16, 2010

CodePlex Daily Summary for Tuesday, March 16, 2010New ProjectsAAPL-MySQL (a MySql implementation of the Agile ADO.Net Persistence Layer): Using the code conventions and code of the Agile ADO.Net Persistence Layer to build a MySql implementationAddress Book: Address Book is simple and easy to use application for storing and editing contacts. It has many features like search and grouping. It's developed ...Airplanes: Airplanes GameAJAX Fax document viewer: The AJAX Fax document viewer is an ASP.net 4.0 project which uses a Seadragon control to display Tiff/Tif files inside the browser. Since it's base...AxeFrog Core: This project contains the foundational code used in several other projects.Bolão: O objetivo deste projeto é estimular a troca de informações e experiências sobre arquitetura e desenvolvimento de software na prática, através do d...Caramel Engine: This is designed to be a logic engine for developing a wide variety of games. To include card logic, dice logic, territories, players, and even man...DotNetNuke® Skin BrandWorks: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by M Perakakis & M Siganou (e-bilab). A very minimal look sk...DotNetNuke® Skin Reasonable: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Ralph Williams of Architech Solutions. A clean, classy, professi...DotNetNuke® Skin Seasons: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Atul Handa and Kevin McCusker of Mercer. This skin is a generic ...File Eraser: File Eraser make it esasier for IT Administrator or Advanced Users to administer files and eliminate long addresses, even UNC. It's developed in VB...GreenEyes: My project for IT personalHulu Launcher: Hulu Launcher is a simple Windows Media Center add-in that attempts to launch Hulu Desktop and manage the windows as seamlessly as possible.Imenik: Imenik makes it easier for users to organise their contacts!KharaPOS: KharaPOS is an Exemplar application for Silverlight 4, WCF RIA Services and .NET Framework 4.Mantas Cryptography: Pequena biblioteca de criptografia com suporte aos algorítmos DES, RC2, Rexor e TripleDES. Gera hashes HMAC-MD5, HMAC-RIPEMD160, HMAC-SHA (SHA1, S...MapWindow3D: A C# DirectX library that extends the MapWindow 6.0 geospatial software library by adding an external map. The map supports rotation and tilting i...Microsoft Silverlight Analytics Framework: Extensible Web Analytics Framework for Microsoft Silverlight Applications.Moq Examples: Unit tests demonstrating Moq features.Ncqrs: Framework that helps you to create Command-Query Responsibility Segregation based applications easily.NoLedge - Notetaking and knowledge database: NoLedge is an easy knowledge gathering and notetaking freeware with a simple interface. You can link a note with different titles and can retrieve ...Numina Application Framework: The framework is a set of tools that help facilitate authentication, authorization, and access control. It is much more than a SSO. It is a central...OData SDK for PHP: OData SDK for PHP is a library to facilitate the connection with OData Services.patterns & practices - Windows Azure Guidance: p&p site for Windows Azure related guidance.projecteuler.net: Exploring projecteuler.net using F#ResumeTracker: Small and easy to use tool that helps to track your job applications. To report bugs or for suggestions please email kirunchik@gmail.com.Selection Maker: Have you ever create a collection of music files? Imagine you just want to pick best of them by your choice. you should go to several folder,play...ShureValidation: Multilingual model validation library. Supports fluent validations, attribute validations and own custom validations.Simple Phonebook: Simple phonebook allows you to store contacts. It also allows you to export the contacts to .txt or .csv. This application is written in C#, but it...SoftUpd: A usefull library which provides an Update feature to any .Net software.sTASKedit: This program can modify and export Perfect World tasks.data files...Tigie: Tigie is a simple CMS system for basic website. It's simple, easy to customize. you'll have a very basic cms to start with and expand for it. All c...toapp: ap hwUltiLogger: UltiLogger is a fast, lightweight logging library programmed in C#. It is meant as a fast, easy, and efficient way for developers to access a relia...Unnme: UnnmeVisual Studio 2008 NUnit snippets: A simple set of useful NUnit snippets, for Visual studio 2008.webdama: italian checkers game c#XBrowser - Headless Browser for .Net: XBrowser is a "headless" web browser written for .Net applications using C#. It is designed to allow automated, remote controlled and test-based br...XML Integrator: XML integration, collaborative toolNew ReleasesAddress Book: Address Book: Address BookAddress Book: Address Book - Source: Address Book source code.AJAX Fax document viewer: AJAXTiff_Source 1.0: Source project for the AJAX Tiff viewer v1.0. Written in Visual Studio 2010 RC using ASP.net 4.0ASP.Net Routing Configuration: mal.Web.Routing v1.0.0.0: mal.Web.Routing v1.0.0.0ASP.NET Wiki Control: Release 1.0: Includes VS2010 Solution and Project files but targets the 3.5 framework so can still be used with VS2008 if new project files are created.BingPaper: Beta: BingPaper Beta Release This Beta release contains quite a few improvements: This Beta release contains a complate overhaul of the replacement tok...Bolão: teste: testeDotNetNuke® Skin Reasonable: Reasonable Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Ralph Williams of Architech Solutions. A clean, classy, professi...DotNetNuke® Skin Seasons: Seasons Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Atul Handa and Kevin McCusker of Mercer. This skin is a generic ...dylan.NET: dylan.NET v. 9.2: In TFS Serverdylan.NET Apps: dylan.NET Apps v. 1.1: First version of dnu.dll together with v.9.2 of dylan.NETFamily Tree Analyzer: Version 1.1.0.0: Version 1.1.0.0 Census report now shows in bold those individuals you KNOW to be alive at the date of the census. Direct Ancestors on census repor...GLB Virtual Player Builder: 0.4.1: Minor change to reset non-major/minor attr to 8.Hulu Launcher: HuluLauncher Release 1.0.1.1: HuluLauncher Release 1.0.1.1 is the initial, barely-tested release of this Windows Media Center add-in. It should work in Vista Media Center and 7 ...Imenik: Imenik: Imenik is now available!jQuery Library for SharePoint Web Services: SPServices 0.5.3: NOTE: While I work on new releases, I post alpha versions. Usually the alpha versions are here to address a particular need. I DO NOT recommend usi...KeelKit: KeelKit 1.0.3800: 更新内容如下: 优化了DBHelper的一些机制修正一些BUG 支持Mysql PHP代理，使得能通过Web代理的方式远程访问数据库服务器添加Model实例化方法，支持所有非自动计算字段的参数实例化、支持所有非空字段实例化添加Model中的常量，使用这些常量可以获得表名称。添加了自...Managed Extensibility Framework (MEF) Contrib: MefContrib 0.9.0.0: Updated to MEF Preview 9 Moved MefContrib.Extensions.Generics to MefContrib.Hosting.Generics Moved MefContrib.Extensions.Generics.Tests to MefC...MooiNooi MVC2LINQ2SQL Web Databinder: MooiNooi MVC2LINQ2SQL Web Databinder v0.1.1: Repaired a problem with collections... only index number under 10 were allowed... Please send me your comments and rate the project. Sorry.Mouse Gestures for .NET: Mouse Gestures 1.0: Improved version of the component + sample application. Version 1.0 is not backward compatible.MoviesForMyBlog: MoviesForMyBlog V1.0: This is version 1.0Nito.KitchenSink: Version 1: The first release of Nito.KitchenSink, which uses Nito.Linq 0.1. Please report any issues via the Issue Tracker.Nito.LINQ: Beta (v0.1): This is the first official public release of Nito.Linq. This release only supports .NET 3.5 SP1 with the Microsoft Rx libraries. The documentation...Nito.LINQ: Beta (v0.2): Added ListSource.Generate overloads that take a delegate for counting the list elements.OData SDK for PHP: OData SDK for PHP: This is an updated version of the ADO.NET Data Services toolkit for PHP. It includes full support for OData Protocol V2.0 specification, better pro...Orchard Project: Orchard Latest Build (0.1.2010.0312): This is a technical preview release of Orchard. Our intent with this release is to demonstrate representative experiences for our audiences (end-us...patterns & practices – Enterprise Library: Enterprise Library 5.0 - Beta2: This is a preliminary release of the code and documentation that may potentially be incomplete, and may change prior to the final release of Enterp...patterns & practices - Unity: Unity 2.0 - Beta2: This is a preliminary release of the code and documentation that may potentially be incomplete, and may change prior to the final release of Unity ...patterns & practices - Windows Azure Guidance: Code drop - 1: This initial version is the before the cloud baseline application, so you won’t find anything related to Windows Azure here. Next iteration, we'l...Rawr: Rawr 2.3.12: - First, a note about Rawr3. Rawr3 has been in development for quite a while now, and we know that everyone's eager to get it. It's been held back ...ResumeTracker: Resume Tracker v1.0: First release.Selection Maker: Selection Maker 1.0: This is just the first release of this programSevenZipSharp: SevenZipSharp 0.61: Added: Windows Mobile support bool Check() method for Extractor to test archives integrity FileExtractionFinished now returns FileInfoEventArgs...Silverlight 3.0 Advanced ToolTipService: Advanced ToolTipService v2.0.1: This release is compiled against the Silverlight 3.0 runtime. A demonstration on how to set the ToolTip content to a property of the DataContext o...Silverlight Flow Layouts library: SL and WPF Flow Layouts library March 2010: This release indtroduces some bug fixes, performance improvements, Silverlight 4 RC and WPF 4.0 RC support. Flow Layouts Library is a control libra...Simple Phonebook: SimplePhonebook Visual Studio 2010 Solution: Ovo je cijeli projekt u kojem se nalaze svi source fileovi koje sam koristio u izradi ove aplikacije. Za pokretanje je potreban Visual Studio 2010....Simple Phonebook: SimplePhonebook.rar: U ovoj .rar datoteci nalaze se izvršni fileovi. _ In this .rar file you can find .exe file needed for executing the application.SLARToolkit - Silverlight Augmented Reality Toolkit: SLARToolkit 1.0.1.0: Updated to Silverlight 4 Release Candidate. Introduces the new GenericMarkerDetector which uses the IXrgbReader interface. See the Marker Detecto...sPWadmin: pwAdmin v1.0: Fixed: Templates can now be saved server restart persistant (wait at least 60 seconds between saving and restarting)SQL Director for Dependencies & Indexes: SDD CTP 1.0: SQL Director for Dependencies allows you to view dependencies between tables, views, function, stored procedures and jobs. Newest Testing build, f...SqlCeViewer: SeasonStar Database Management 0.7.0.2: Update the user interface to help user understand clearly how to use .UltiLogger: Initial alpha release: Important! This is not a feature-complete release! It contains the logging priorities, and an interface for building logging systems from. THERE IS...Visual Studio 2008 NUnit snippets: Version 1.0: First stable release.Zeta Resource Editor: Source Code Release 2010-03-16: New source code. Binary setup is also available.Most Popular ProjectsMetaSharpWBFS ManagerRawrAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitASP.NET Ajax LibraryWindows Presentation Foundation (WPF)ASP.NETLiveUpload to FacebookMost Active ProjectsLINQ to TwitterOData SDK for PHPRawrN2 CMSpatterns & practices – Enterprise LibraryDirectQBlogEngine.NETMapWindow6SharePoint Team-MailerNB_Store - Free DotNetNuke Ecommerce Catalog Module

Read the article

Searching for tasks with code – Executables and Event Handlers

Searching packages or just enumerating through all tasks is not quite as straightforward as it may first appear, mainly because of the way you can nest tasks within other containers. You can see this illustrated in the sample package below where I have used several sequence containers and loops. To complicate this further all containers types, including packages and tasks, can have event handlers which can then support the full range of nested containers again. Towards the lower right, the task called SQL In FEL also has an event handler not shown, within which is another Execute SQL Task, so that makes a total of 6 Execute SQL Tasks 6 tasks spread across the package. In my previous post about such as adding a property expressionI kept it simple and just looked at tasks at the package level, but what if you wanted to find any or all tasks in a package? For this post I've written a console program that will search a package looking at all tasks no matter how deeply nested, and check to see if the name starts with "SQL". When it finds a matching task it writes out the hierarchy by name for that task, starting with the package and working down to the task itself. The output for our sample package is shown below, note it has found all 6 tasks, including the one on the OnPreExecute event of the SQL In FEL task TaskSearch v1.0.0.0 (1.0.0.0) Copyright (C) 2009 Konesans Ltd Processing File - C:\Projects\Alpha\Packages\MyPackage.dtsx MyPackage\FOR Counter Loop\SQL In Counter Loop MyPackage\SEQ For Each Loop Wrapper\FEL Simple Loop\SQL In FEL MyPackage\SEQ For Each Loop Wrapper\FEL Simple Loop\SQL In FEL\OnPreExecute\SQL On Pre Execute for FEL SQL Task MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SEQ Nested Lvl 2\SQL In Nested Lvl 2 MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SQL In Nested Lvl 1 #1 MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SQL In Nested Lvl 1 #2 6 matching tasks found in package. The full project and code is available for download below, but first we can walk through the project to highlight the most important sections of code. This code has been abbreviated for this description, but is complete in the download. First of all we load the package, and then start by looking at the Executables for the package. // Load the package file Application application = new Application(); using (Package package = application.LoadPackage(filename, null)) { int matchCount = 0; // Look in the package's executables ProcessExecutables(package.Executables, ref matchCount); ... // // ... // Write out final count Console.WriteLine("{0} matching tasks found in package.", matchCount); } The ProcessExecutables method is a key method, as an executable could be described as the the highest level of a working functionality or container. There are several of types of executables, such as tasks, or sequence containers and loops. To know what to do next we need to work out what type of executable we are dealing with as the abbreviated version of method shows below. private static void ProcessExecutables(Executables executables, ref int matchCount) { foreach (Executable executable in executables) { TaskHost taskHost = executable as TaskHost; if (taskHost != null) { ProcessTaskHost(taskHost, ref matchCount); ProcessEventHandlers(taskHost.EventHandlers, ref matchCount); continue; } ... // // ... ForEachLoop forEachLoop = executable as ForEachLoop; if (forEachLoop != null) { ProcessExecutables(forEachLoop.Executables, ref matchCount); ProcessEventHandlers(forEachLoop.EventHandlers, ref matchCount); continue; } } } As you can see if the executable we find is a task we then call out to our ProcessTaskHost method. As with all of our executables a task can have event handlers which themselves contain more executables such as task and loops, so we also make a call out our ProcessEventHandlers method. The other types of executables such as loops can also have event handlers as well as executables. As shown with the example for the ForEachLoop we call the same ProcessExecutables and ProcessEventHandlers methods again to drill down into the hierarchy of objects that the package may contain. This code needs to explicitly check for each type of executable (TaskHost, Sequence, ForLoop and ForEachLoop) because whilst they all have an Executables property this is not from a common base class or interface. This example was just a simple find a task by its name, so ProcessTaskHost really just does that. We also get the hierarchy of objects so we can write out for information, obviously you can adapt this method to do something more interesting such as adding a property expression. private static void ProcessTaskHost(TaskHost taskHost, ref int matchCount) { if (taskHost == null) { return; } // Check if the task matches our match name if (taskHost.Name.StartsWith(TaskNameFilter, StringComparison.OrdinalIgnoreCase)) { // Build up the full object hierarchy of the task // so we can write it out for information StringBuilder path = new StringBuilder(); DtsContainer container = taskHost; while (container != null) { path.Insert(0, container.Name); container = container.Parent; if (container != null) { path.Insert(0, "\\"); } } // Write the task path // e.g. Package\Container\Event\Task Console.WriteLine(path); Console.WriteLine(); // Increment match counter for info matchCount++; } } Just for completeness, the other processing method we covered above is for event handlers, but really that just calls back to the executables. This same method is called in our main package method, but it was omitted for brevity here. private static void ProcessEventHandlers(DtsEventHandlers eventHandlers, ref int matchCount) { foreach (DtsEventHandler eventHandler in eventHandlers) { ProcessExecutables(eventHandler.Executables, ref matchCount); } } As hopefully the code demonstrates, executables (Microsoft.SqlServer.Dts.Runtime.Executable) are the workers, but within them you can nest more executables (except for task tasks).Executables themselves can have event handlers which can in turn hold more executables. I have tried to illustrate this highlight the relationships in the following diagram. Download Sample code project TaskSearch.zip (11KB)

Read the article

6 Interesting Facts About NASA’s Mars Rover ‘Curiosity’

- by Gopinath

Humans quest for exploring the surrounding planets to see whether we can live there or not is taking new shape today. NASA’s Mars probing robot, Curiosity, blasted off today on its 9 months journey to reach Mars and explore it for the possibilities of life there. Scientist says that Curiosity is one most advanced rover ever launched to probe life on other planets. Here is the launch video and some analysis by a news reporter Lets look at the 6 interesting facts about the mission 1. It’s as big as a car Curiosity is the biggest ever rover ever launched by NASA to probe life on outer planets. It’s as big as a car and almost double the size of its predecessor rover Spirit. The length of Curiosity is around 9 feet 10 inches(3 meters), width is 9 feet 1 inch (2.8 meters) and height is 7 feet (2.1 meters). 2. Powered by Plutonium – Lasts 24×7 for 23 months The earlier missions of NASA to explore Mars are powered by Solar power and that hindered capabilities of the rovers to move around when the Sun is hiding. Due to dependency of Sun the earlier rovers were not able to traverse the places where there is no Sun light. Curiosity on the other hand is equipped with a radioisotope power system that generates electricity from the heat emitted by plutonium’s radioactive decay. The plutonium weighs around 10 pounds and can generate power required for operating the rover close to 23 weeks. The best part of the new power system is, Curiosity can roam around in darkness, light and all year around. 3. Rocket powered backpack for a science fiction style landing The Curiosity is so heavy that NASA could not use parachute and balloons to air-drop the rover on the surface of Mars like it’s previous missions. They are trying out a new science fiction style air-dropping mechanism that is similar to sky crane heavy-lift helicopter. The landing of the rover begins first with entry into the Mars atmosphere protected by a heat shield. At about 6 miles to the surface, the heat shield is jettisoned and a parachute is deployed to glide the rover smoothly. When the rover touches 3 miles above the surface, the parachute is jettisoned and the eight motors rocket backpack is used for a smooth and impact free landing as shown in the image. Here is an animation created by NASA on the landing sequence. If you are interested in getting more detailed information about the landing process check this landing sequence picture available on NASA website 4. Equipped with Star Wars style laser gun Hollywood movie directors and novelist always imagined aliens coming to earth with spaceships full of laser guns and blasting the objects which comes on their way. With Curiosity the equations are going to change. It has a powerful laser gun equipped in one of it’s arms to beam laser on rocks to vaporize them. This is not part of any assault mission Curiosity is expected to carry out, the laser gun is will be used to carry out experiments to detect life and understand nature. 5. Most sophisticated laboratory powered by 10 instruments Around 10 state of art instruments are part of Curiosity rover and the these 10 instruments form a most advanced rover based lab ever built by NASA. There are instruments to cut through rocks to examine them and other instruments will search for organic compounds. Mounted cameras can study targets from a distance, arm mounted instruments can study the targets they touch. Microscopic lens attached to the arm can see and magnify tiny objects as tiny as 12.5 micro meters. 6. Rover Carrying 1.24 million names etched on silicon Early June 2009 NASA launched a campaign called “Send Your Name to Mars” and around 1.24 million people registered their names through NASA’s website. All those 1.24 million names are etched on Silicon chips mounted onto Curiosity’s deck. If you had registered your name in the campaign may be your name is going to reach Mars soon. Curiosity On Web If you wish to follow the mission here are few links to help you NASA’s Curiosity Web Page Follow Curiosity on Facebook Follow @MarsCuriosity on Twitter Artistic Gallery Image of Mars Rover Curiosity A printable sheet of Curiosity Mission [pdf] Images credit: NASA This article titled,6 Interesting Facts About NASA’s Mars Rover ‘Curiosity’, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

Read the article

Oracle Open World 2012: SQL Developer Recap

- by thatjeffsmith

Last week was the ‘big show’ in San Francisco. I was very happy to meet many of you in person. And many of you had questions – lots of questions! We had full or overflowing rooms for our sessions and hands-on-labs. The SQL Developer ‘booths’ were also slammed several times. So exciting to see so many of YOU excited about SQL Developer. It’s very cool to hear the stories of our tools saving you and your organizations so much time (and money!) Instead of doing a Day 0 – Day 9 recap, I thought I’d share with you the questions that I heard more than once. And just for giggles, I’ll throw in some answers as well So in no particular order… What’s the difference between Oracle SQL Developer & Oracle SQL Developer Data Modeler? Mathematically speaking – two words. But as far as the actual modeling features go, there’s no difference between the two applications. The same ‘code’ or features as it pertains to data modeling and design are in both tools. However, in SQL Developer you have all of the OTHER features fighting for real estate in the UI. So I have a general rule of thumb – if you spend MOST of your time in the database, use SQL Developer. And if you spend most of your time in the data model, run the separate and dedicated program, Oracle SQL Developer Data Modeler. Here’s a couple of screenshots to drive home the UI point: Oracle SQL Developer Oracle SQL Developer Data Modeler running INSIDE of SQL Developer. Notice how the Modeler menu items fold under the file menu? Oracle SQL Developer Data Modeler Easier to navigate and manipulate your models with the stand alone modeler. Just no worksheet to run your ad-hoc queries, etc. Don’t forget you can disable the Data Modeler inside of SQL Developer via the Extensions preference page. How can I model my table partitions? Partitioning is defined via the Physical model. So after you have finished your relational model, you need to generate a physical model. Oracle SQL Developer Data Modeler Physical Model and Partitioning Open the properties for your physical model table. Enable the ‘partitioned’ property. Once you do so, the ‘Partitioning’ page will activate. Lots and lots of partitioning support and options here But what about Interval Partitioning? An extension of range partitioning in 11gR2, we don’t currently support this partitioning scheme in SQL Developer. But we’re working on it! Can SQL Developer ignore column order when comparing models? Yes! After you start a model compare, one of your options is to disregard the order of an attribute or column definition. Tell SQL Developer you don’t care when your column shows up, just as long as it DOES show up. Wow, you got a lot of questions around modeling! Is that normal? Yes! While we appreciate that many folks inherit their applications and associated designs, new applications are being ‘born’ every day. Since both of our tools are free for anyone to design their new Oracle applications with, we attract a fair amount of attention I want to do a Hands On Lab. How do I get your software and instructional guides? Go here. Download VirtualBox. Then download the VB image. Import the appliance. Start it. Connect oracle/oracle on the OEL VM. Click on ‘Start Here’ in the desktop. Follow the instructions. If you need help, ask away! You went too fast in your Tips & Tricks session. Do you have cliff notes? Yes! And you’re SO close to finding them! Just go to my SQL Developer resources page. All of my tips are documented on this blog somewhere. I’ve indexed the most popular ones on the resource page. You can use the Search dialog on the right to find the rest. Or just send me a comment or question, and I’ll do my best to answer them as they come in.

Read the article

How To Replace Notepad in Windows 7

- by Trevor Bekolay

It used to be that Notepad was a necessary evil because it started up quickly and let us catch a quick glimpse of plain text files. Now, there are a bevy of capable Notepad replacements that are just as fast, but also have great feature sets. Before following the rest of this how-to, ensure that you’re logged into an account with Administrator access. Note: The following instructions involve modifying some Windows system folders. Don’t mess anything up while you’re in there! If you follow our instructions closely, you’ll be fine. Choose your replacement There are a ton of great Notepad replacements, including Notepad2, Metapad, and Notepad++. The best one for you will depend on what types of text files you open and what you do with them. We’re going to use Notepad++ in this how-to. The first step is to find the executable file that you’ll replace Notepad with. Usually this will be the only file with the .exe file extension in the folder where you installed your text editor. Copy the executable file to your desktop and try to open it, to make sure that it works when opened from a different folder. In the Notepad++ case, a special little .exe file is available for the explicit purpose of replacing Notepad.If we run it from the desktop, it opens up Notepad++ in all its glory. Back up Notepad You will probably never go back once you switch, but you never know. You can backup Notepad to a special location if you’d like, but we find it’s easiest to just keep a backed up copy of Notepad in the folders it was originally located. In Windows 7, Notepad resides in: C:\Windows C:\Windows\System32 C:\Windows\SysWOW64 in 64-bit versions only Navigate to each of those directories and copy Notepad. Paste it into the same folder. If prompted, choose to Copy, but keep both files. You can keep your backup as “notepad (2).exe”, but we prefer to rename it to “notepad.exe.bak”. Do this for all of the folders that have Notepad (2 total for 32-bit Windows 7, 3 total for 64-bit). Take control of Notepad and delete it Even if you’re on an administrator account, you can’t just delete Notepad – Microsoft has made some security gains in this respect. Fortunately for us, it’s still possible to take control of a file and delete it without resorting to nasty hacks like disabling UAC. Navigate to one of the directories that contain Notepad. Right-click on it and select Properties. Switch to the Security tab, then click on the Advanced button. Note that the owner of the file is a user called “TrustedInstaller”. You can’t do much with files owned by TrustedInstaller, so let’s take control of it. Click the Edit… button. Select the desired owner (you could choose your own account, but we’re going to give any Administrator control) and click OK. You’ll get a message that you need to close and reopen the Properties windows to edit permissions. Before doing that, confirm that the owner has changed to what you selected. Click OK, then OK again to close the Properties window. Right-click on Notepad and click on Properties again. Switch to the Security tab. Click on Edit…. Select the appropriate group or user name in the list at the top, then add a checkmark in the checkbox beside Full control in the Allow column. Click OK, then Yes to the dialog box that pops up. Click OK again to close the Properties window. Now you can delete Notepad, by either selecting it and pressing Delete on the keyboard, or right-click on it and click Delete. You’re now free from Notepad’s foul clutches! Repeat this procedure for the remaining folders (or folder, on 32-bit Windows 7). Drop in your replacement Copy your Notepad replacement’s executable, which should still be on your desktop. Browse to the two or three folders listed above and copy your .exe to those locations. If prompted for Administrator permission, click Continue. If your executable file was named something other than “notepad.exe”, rename it to “notepad.exe”. Don’t be alarmed if the thumbnail still shows the old Notepad icon. Double click on Notepad and your replacement should open. To make doubly sure that it works, press Win+R to bring up the Run dialog box and enter “notepad” into the text field. Press enter or click OK. Now you can allow Windows to open files with Notepad by default with little to no shame! All without restarting or having to disable UAC! Similar Articles Productive Geek Tips Search and Replace Specific Formatting (fonts, styles,etc) in Microsoft WordHow to Drag Files to the Taskbar to Open Them in Windows 7Customize the Windows 7 or Vista Send To MenuKill Processes from the Windows Command LineChange Your Windows 7 Library Icons the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Use My TextTools to Edit and Organize Text Discovery Channel LIFE Theme (Win7) Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor

Read the article

Multitask Like a Pro with AquaSnap

- by Matthew Guay

Are you tired of shuffling back and forth between windows? Here’s a handy app that can help you keep all of your windows organized and accessible. AquaSnap is a great free utility that helps you use multiple windows at the same time easily and efficiently. One of Windows 7’s greatest new features is Aero Snap, which lets you easily view windows side by side by simply dragging windows to side of your screen. After using Windows 7 for the past year, Aero Snap is one of the features we really miss when using older versions of Windows. With AquaSnap, you now have all of the features of Aero Snap and more in Windows 2000, XP, Vista, and of course Windows 7. Not only does it give you Aero Snap features, but AquaSnap also gives you more control over your windows to make you more productive. Getting Started AquaSnap is a a free download for Windows 2000, XP, Vista, and 7. Download the small installer (link below) and install it with the default settings. AquaSnap automatically runs as soon as it is installed, and you will notice a new icon in your system tray. Now you can go ahead and put it to use. Drag a window to any edge or corner of your desktop, and you will see an icon showing what part of the screen the window will cover. Dragging it to the side of the screen expanded the window to fill the right half of the screen, just like the default Aero Snap in Windows 7. You can drag the window away to restore it to its former size. AquaSnap works on any corner of the screen too, so you can have 4 windows side-by-side. We already have 3 windows snapped to the corners, and notice that we’re dragging a fourth window to the bottom right corner. You can also snap windows to the bottom and top of the screen. Here we have Word snapped to the bottom half of the screen, and we’re dragging Chrome to the top. You can even snap internal windows in Multiple Document Interface (MDI) programs such as Excel. Here we are snapping a workbook in Excel to the left to view 2 workbooks side-by-side. Additionally, AquaSnap lets you keep any window always on top. Simply shake any window, and it will turn semi-transparent and stay on top of all other windows. Notice the transparent calculator here on top of Excel. All of AquaSnap’s features work great in Windows 2000, XP, and Vista too. Here we are snapping IE6 to the left of the screen in XP. Here are 3 windows snapped to the sides in XP. You can mix the snap modes, and have, for instance, two windows on the right side and one window on the left. This is a great way to maximize productivity if you need more space in one of the windows. Even AquaShake works to keep a window transparent and on top in XP. Settings AquaSnap has a detailed settings dialog where you can tweak it to work exactly like you want. Simply right-click on its icon in the taskbar, and select Settings. From the first screen, you can choose if you want AquaSnap to start with Windows, and if you want it to show an icon in the system tray. If you turn off the system tray icon, you can access the AquaSnap settings from Start > All Programs > AquaSnap > Configuration (or simply search for Configuration in Vista or Windows 7). The second tab in settings lets you choose what you want each snapping region to do. You can also choose two other presets, including AeroSnap (which works just like the default Aero Snap in Windows 7) and AquaSnap simple (which only snaps at the edges of the screen, not the corners). The third tab lets you increase or decrease the opacity of pinned windows when using AquaShake, and also lets you increase or decrease the shaking sensitivity. Additionally, if you prefer the standard AeroShake functionality, which minimizes all other open windows when you shake a window, you can choose that too. The fourth tab lets you activate an optional feature, AquaGlass. If you activate this, it will make windows turn transparent when you drag them across the screen. Finally, the last tab lets you change the color and opacity of the preview rectangle, or simply turn it off. Or, if you want to temporarily turn AquaSnap off, simply right-click on its icon and select Off. In Windows 7, turning off AquaSnap will restore your standard Windows Aero Snap functionality, and in other version of Windows it will stop letting you snap windows at all. You can then repeat the steps and select On when you want to use AquaSnap again. Conclusion AquaSnap is a handy tool to make you more productive at your computer. With a wide variety of useful features, there’s something here for everyone. Download AquaSnap Similar Articles Productive Geek Tips How to Get Virtual Desktops on Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) If it were only this easy Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook

Read the article

Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 2

- by rajbk

In the previous post, you saw how to create an OData feed and pre-filter the data. In this post, we will see how to shape the data. A sample project is attached at the bottom of this post. Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 1 Shaping the feed The Product feed we created earlier returns too much information about our products. Let’s change this so that only the following properties are returned – ProductID, ProductName, QuantityPerUnit, UnitPrice, UnitsInStock. We also want to return only Products that are not discontinued. Splitting the Entity To shape our data according to the requirements above, we are going to split our Product Entity into two and expose one through the feed. The exposed entity will contain only the properties listed above. We will use the other Entity in our Query Interceptor to pre-filter the data so that discontinued products are not returned. Go to the design surface for the Entity Model and make a copy of the Product entity. A “Product1” Entity gets created. Rename Product1 to ProductDetail. Right click on the Product entity and select “Add Association” Make a one to one association between Product and ProductDetails. Keep only the properties we wish to expose on the Product entity and delete all other properties on it (see diagram below). You delete a property on an Entity by right clicking on the property and selecting “delete”. Keep the ProductID on the ProductDetail. Delete any other property on the ProductDetail entity that is already present in the Product entity. Your design surface should look like below: Mapping Entity to Database Tables Right click on “ProductDetail” and go to “Table Mapping” Add a mapping to the “Products” table in the Mapping Details. After mapping ProductDetail, you should see the following. Add a referential constraint. Lets add a referential constraint which is similar to a referential integrity constraint in SQL. Double click on the Association between the Entities and add the constraint with “Principal” set to “Product”. Let us review what we did so far. We made a copy of the Product entity and called it ProductDetail We created a one to one association between these entities Excluding the ProductID, we made sure properties were not duplicated between these entities We added a ProductDetail entity to Products table mapping (Entity to Database). We added a referential constraint between the entities. Lets build our project. We get the following error: ”'NortwindODataFeed.Product' does not contain a definition for 'Discontinued' and no extension method 'Discontinued' accepting a first argument of type 'NortwindODataFeed.Product' could be found …" The reason for this error is because our Product Entity no longer has a “Discontinued” property. We “moved” it to the ProductDetail entity since we want our Product Entity to contain only properties that will be exposed by our feed. Since we have a one to one association between the entities, we can easily rewrite our Query Interceptor like so: [QueryInterceptor("Products")] public Expression<Func<Product, bool>> OnReadProducts() { return o => o.ProductDetail.Discontinued == false; } Similarly, all “hidden” properties of the Product table are available to us internally (through the ProductDetail Entity) for any additional logic we wish to implement. Compile the project and view the feed. We see that the feed returns only the properties that were part of the requirement. To see the data in JSON format, you have to create a request with the following request header Accept: application/json, text/javascript, */* (easy to do in jQuery) The result should look like this: { "d" : { "results": [ { "__metadata": { "uri": "http://localhost.:2576/DataService.svc/Products(1)", "type": "NorthwindModel.Product" }, "ProductID": 1, "ProductName": "Chai", "QuantityPerUnit": "10 boxes x 20 bags", "UnitPrice": "18.0000", "UnitsInStock": 39 }, { "__metadata": { "uri": "http://localhost.:2576/DataService.svc/Products(2)", "type": "NorthwindModel.Product" }, "ProductID": 2, "ProductName": "Chang", "QuantityPerUnit": "24 - 12 oz bottles", "UnitPrice": "19.0000", "UnitsInStock": 17 }, { ... ... If anyone has the $format operation working, please post a comment. It was not working for me at the time of writing this. We have successfully pre-filtered our data to expose only products that have not been discontinued and shaped our data so that only certain properties of the Entity are exposed. Note that there are several other ways you could implement this like creating a QueryView, Stored Procedure or DefiningQuery. You have seen how easy it is to create an OData feed, shape the data and pre-filter it by hardly writing any code of your own. For more details on OData, Google it with your favorite search engine :-) Also check out the one of the most passionate persons I have ever met, Pablo Castro – the Architect of Aristoria WCF Data Services. Watch his MIX 2010 presentation titled “OData: There's a Feed for That” here. Download Sample Project for VS 2010 RTM NortwindODataFeed.zip

Read the article

Getting selected row in inputListOfValues returnPopupListener

- by Frank Nimphius

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Model driven list-of-values in Oracle ADF are configured on the ADF Business component attribute which should be updated with the user value selection. The value lookup can be configured to be displayed as a select list, combo box, input list of values or combo box with list of values. Displaying the list in an af:inputListOfValues component shows the attribute value in an input text field and with an icon attached to it for the user to launch the list-of-values dialog. The list-of-values dialog allows users to use a search form to filter the lookup data list and to select an entry, which return value then is added as the value of the af:inputListOfValues component. Note: The model driven LOV can be configured in ADF Business Components to update multiple attributes with the user selection, though the most common use case is to update the value of a single attribute. A question on OTN was how to access the row of the selected return value on the ADF Faces front end. For this, you need to know that there is a Model property defined on the af:inputListOfValues that references the ListOfValuesModel implementation in the model. It is the value of this Model property that you need to get access to. The af:inputListOfValues has a ReturnPopupListener property that you can use to configure a managed bean method to receive notification when the user closes the LOV popup dialog by selecting the Ok button. This listener is not triggered when the cancel button is pressed. The managed bean signature can be created declaratively in Oracle JDeveloper 11g using the Edit option in the context menu next to the ReturnPopupListener field in the PropertyInspector. The empty method signature looks as shown below public void returnListener(ReturnPopupEvent returnPopupEvent) { } The ReturnPopupEvent object gives you access the RichInputListOfValues component instance, which represents the af:inputListOfValues component at runtime. From here you access the Model property of the component to then get a handle to the CollectionModel. The CollectionModel returns an instance of JUCtrlHierBinding in its getWrappedData method. Though there is no tree binding definition for the list of values dialog defined in the PageDef, it exists. Once you have access to this, you can read the row the user selected in the list of values dialog. See the following code: public void returnListener(ReturnPopupEvent returnPopupEvent) { //access UI component instance from return event RichInputListOfValues lovField = (RichInputListOfValues)returnPopupEvent.getSource(); //The LOVModel gives us access to the Collection Model and //ADF tree binding used to populate the lookup table ListOfValuesModel lovModel = lovField.getModel(); CollectionModel collectionModel = lovModel.getTableModel().getCollectionModel(); //The collection model wraps an instance of the ADF //FacesCtrlHierBinding, which is casted to JUCtrlHierBinding JUCtrlHierBinding treeBinding = (JUCtrlHierBinding) collectionModel.getWrappedData(); //the selected rows are defined in a RowKeySet.As the LOV table only //supports single selections, there is only one entry in the rks RowKeySet rks = (RowKeySet) returnPopupEvent.getReturnValue(); //the ADF Faces table row key is a list. The list contains the //oracle.jbo.Key List tableRowKey = (List) rks.iterator().next(); //get the iterator binding for the LOV lookup table binding DCIteratorBinding dciter = treeBinding.getDCIteratorBinding(); //get the selected row by its JBO key Key key = (Key) tableRowKey.get(0); Row rw = dciter.findRowByKeyString(key.toStringFormat(true)); //work with the row // ... }

Read the article

Programmatically reuse Dynamics CRM 4 icons

- by gperera

The team that wrote the dynamics crm sdk help rocks! I wanted to display the same crm icons on our time tracking application for consistency, so I opened up the sdk help file, searched for 'icon', ignored all the sitemap/isv config entries since I know I want to get these icons programatically, about half way down the search results I see 'organizationui', sure enough that contains the 16x16 (gridicon), 32x32 (outlookshortcuticon) and 66x48 (largeentityicon) icons!To get all the entities, execute a retrieve multiple request. RetrieveMultipleRequest request = new RetrieveMultipleRequest{ Query = new QueryExpression { EntityName = "organizationui", ColumnSet = new ColumnSet(new[] { "objecttypecode", "formxml", "gridicon" }), }}; var response = sdk.Execute(request) as RetrieveMultipleResponse;Now you have all the entities and icons, here's the tricky part, all the custom entities in crm store the icons inside gridicon, outlookshortcuticon and largeentityicon attributes, the built-in entity icons are stored inside the /_imgs/ folder with the format of /_imgs/ico_16_xxxx.gif (gridicon), with xxxx being the entity type code. The entity type code is not stored inside an attribute of organizationui, however you can get it by looking at the formxml attribute objecttypecode xml attribute. response.BusinessEntityCollection.BusinessEntities.ToList() .Cast<organizationui>().ToList() .ForEach(a => { try { // easy way to check if it's a custom entity if (!string.IsNullOrEmpty(a.gridicon)) { byte[] gif = Convert.FromBase64String(a.gridicon); } else { // built-in entity if (!string.IsNullOrEmpty(a.formxml)) { int start = a.formxml.IndexOf("objecttypecode=\"") + 16; int end = a.formxml.IndexOf("\"", start); // found the entity type code string code = a.formxml.Substring(start, end - start); string url = string.Format("/_imgs/ico_16_{0}.gif", code);Enjoy!

Read the article

Add Hotmail & Live Email Accounts to Outlook 2010

- by Matthew Guay

Microsoft has recently been promoting upcoming updates to their Hotmail service, promising to make it an even better webmail service. But Microsoft’s revamped Outlook 2010 is already here. Here’s how to integrate Hotmail with Outlook. Outlook 2010 works with a wide variety of email accounts, including POP3, IMAP, and Exchange accounts. The only problem with POP3 and IMAP accounts is that they only sync email, but not your calendar and contacts like Exchange does. Hotmail, however, lets you sync your email, contacts, and calendar with Outlook with the Hotmail Connector. This lets you keep all of your PIM data accessible from everywhere. Let’s look at how we can set this up on our account. Getting Started The easiest way to add Hotmail to Outlook is to first install the Outlook Hotmail Connector (link below). Make sure Outlook is closed first, and then proceed with the installation as usual. If you enter your Hotmail account into the New Account setup in Outlook before installing the Hotmail Connector, Outlook will prompt you to download the Hotmail Connector. However, you’ll have to exit Outlook before you can install the Connector, and then will have to re-enter your information when you restart Outlook, so it’s easier to just install it first. Add Your Hotmail Account to Outlook Now you’re ready to add your Hotmail account to Outlook. If this is the first time you’ve run Outlook 2010, you’ll be greeted with the following screen. Click Next to proceed with setup. Then select Yes and click Next again. If you’ve already got an email account setup in Outlook, you can add a new account by clicking File and then selecting Add account. Now, enter your Hotmail account information, and click Next. Outlook will search for your account settings and automatically setup your account with the Hotmail connector we previously installed. If you entered your password incorrectly previously, you may see the following popup. Re-enter your password and click OK, and Outlook will re-verify your settings. Once everything’s finished and setup, you’ll see the following completion screen. Click Finish to complete the setup and check out your Hotmail in Outlook. Welcome to your Hotmail account in Outlook 2010. You’ll notice a small notification at the bottom of the window notifying you that you’re connected to Windows Live Hotmail. Now your email will synchronize with your Hotmail account, and your Outlook calendar and contacts will be synced with your Live calendar and contacts, respectively. This is the closest you can get to full Exchange without an Exchange account, and in our experience it works great. In fact, Hotmail Sync seems to work faster than IMAP sync for us. Setup Hotmail With POP3 Access If you need to access your Hotmail email account but don’t want to install the Outlook Connector, then you can add it with POP3 sync. We recommend going with the Outlook Connector for the best experience, but if you can’t install it (eg. you’re not allowed to install applications on your work PC) then this is a good alternative. To do this, follow our tutorial on setting up a Gmail POP3 account in Outlook. Although the article concentrates on Gmail, the settings are essentially the same. The only thing you’ll want to change is the Incoming and Outgoing mail server. Incoming mail server – pop3.live.com Outgoing mail server – smtp.live.com User name – your Hotmail or Live email address Incoming Server (POP3) – 995 Outgoing Server (SMTP) – 587 Also, check This server requires and encrypted connection Just as in the Gmail example, select TLS for the type of encrypted connection. Then, on the bottom, make sure to uncheck the box to Remove messages from the server after a number of days. This way your messages will still be accessible from your Hotmail account online. Conclusion Even though Hotmail is generally not as popular as Gmail, it works great with Outlook integration. If you’re a heavy user of Windows Live services, or want to try them out, Outlook Connector is the easiest way to keep your desktop activity synced with the cloud. If you’re just one of the millions of Hotmail users who want to access their old Hotmail account alongside their other accounts, this method works great for you too. If you’re using Outlook 2003 or 2007, check out our article on using Hotmail from Microsoft Outlook. Links Download Outlook Hotmail Connector 32-bit Download Outlook Hotmail Connector 64-bit – note, only for users of Office 2010 x64 Similar Articles Productive Geek Tips Use Hotmail from Microsoft OutlookHow to add any POP3 Email Account to HotmailHow to Send and Receive Hotmail from Your Gmail AccountAdd Your Gmail To Windows Live MailManage Your Windows Live Account in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes

Read the article

Edit ePub eBooks with Your Favorite HTML Editor

- by Matthew Guay

ePub eBooks are increasingly popular today, but often they’ve been made by converting other file formats. Here’s how you can edit ePub books to remove irregularities and make them better for reading on your devices. ePub’s are actually a zip file containing images, XHTML files with your text, and more with the .epub extension. You can make them better by editing the XHTML files directly. Code gurus can edit the code directly, but even if you’ve never edited HTML, you can still quickly make changes with a WYSIWYG editor. Extract the Files from your ePub eBook As mentioned before, ePub files are actually renamed zip files. So first let’s get all of the files in your ePub eBook accessible. Find an eBook you want to edit and then change the file extension to .zip. If you don’t see the file extensions, click Organize in the menu bar and select Folder and search options. Select the View tab, and then uncheck the box beside Hide extensions for known file types. Click Ok, and then change the file type as above. Windows will warn you about changing the file type; click Yes to proceed. Now you can browse the files of the ePub file. Notice that it contains mostly HTML or XHTML files and images. Click Extract all files to save them all in a folder so you can easily edit them. Alternately, you can open the ePub file directly in your favorite file archival program such as 7-zip. Browse to the location of your ePub file, double-click it, and it’ll automatically open even if you don’t change the file extension to zip. Now you can extract the folder, or extract individual files as before. Edit Your eBook in KompoZer The actual ebook contents are stored in HTML or XHTML files. These may be stored on the top folder of you ePub file’s directory, or they may be stored in \OEBPS\text in the file. To change the contents of your eBook, you’ll want to edit these files. Often there may be separate files for each chapter, so you may have to use trial and error to find the one you need to edit. You could edit them by hand in Windows using Notepad if you don’t have an HTML editor installed. A better option would be to use an HTML editor. Here we’ll use the free KompoZer program to edit the files just like we’d edit a document in Word. Download KompoZer (link below), and unzip the files. Then open the new folder and launch kompozer.exe; you don’t even need to install it. In fact, you could even store KompoZer on a flash drive so you could edit HTML files from any computer. In KompoZer, open the HTML or XHTML file from your eBook that you want to edit. Now you can edit the file just like you would edit a document in Word. Remove extra and unneeded text, make titles stand out, correct misspellings … anything you want! This is especially helpful if your ePub file was created by converting a PDF as these often have many small errors. Or, if you’d rather edit the code itself, select the Source tab and edit as you wish. When you’re done making the changes, make sure to save the file in the same location with the same file name. Recreate Your Edited ePub eBook Once you’ve made all the changes you wanted, it’s time to turn this folder of files back into ePub. Make sure you change the name of the folder if it still has the same name as the original ePub or zip file so you don’t mix them up or have trouble with overwriting the old files. Zip the folder using Windows Explorer or your favorite archival utility. If you are using another archival program, make sure to compress it as a zip folder; other compression methods will render the ePub unreadable by your eReader app. Now change the file extension again, this time back to .epub. Now you can read your eBook with your changes in your favorite reader program or app on your mobile device. Conclusion Whether you need to remove an odd, misplaced character or need to do fine editing, using an HTML editor is a great way to make your ePub eBooks look just like you want. Also, with an editor like KompoZer it’s not even difficult. Download KompoZer Similar Articles Productive Geek Tips Change the Default Editor From Nano on Ubuntu LinuxConvert a PDF eBook to ePub Format for Your iPad, iPhone, or eReaderRead Mobi eBooks on Kindle for PCEdit Your Firefox Bookmarks Easier with Flat Bookmark EditorChange the Default Editor for Batch Files in Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server XPS file format & XPS Viewer Explained Microsoft Office Web Apps Guide Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter

Read the article

Big Data – Role of Cloud Computing in Big Data – Day 11 of 21

- by Pinal Dave

In yesterday’s blog post we learned the importance of the NewSQL. In this article we will understand the role of Cloud in Big Data Story What is Cloud? Cloud is the biggest buzzword around from last few years. Everyone knows about the Cloud and it is extremely well defined online. In this article we will discuss cloud in the context of the Big Data. Cloud computing is a method of providing a shared computing resources to the application which requires dynamic resources. These resources include applications, computing, storage, networking, development and various deployment platforms. The fundamentals of the cloud computing are that it shares pretty much share all the resources and deliver to end users as a service. Examples of the Cloud Computing and Big Data are Google and Amazon.com. Both have fantastic Big Data offering with the help of the cloud. We will discuss this later in this blog post. There are two different Cloud Deployment Models: 1) The Public Cloud and 2) The Private Cloud Public Cloud Public Cloud is the cloud infrastructure build by commercial providers (Amazon, Rackspace etc.) creates a highly scalable data center that hides the complex infrastructure from the consumer and provides various services. Private Cloud Private Cloud is the cloud infrastructure build by a single organization where they are managing highly scalable data center internally. Here is the quick comparison between Public Cloud and Private Cloud from Wikipedia: Public Cloud Private Cloud Initial cost Typically zero Typically high Running cost Unpredictable Unpredictable Customization Impossible Possible Privacy No (Host has access to the data Yes Single sign-on Impossible Possible Scaling up Easy while within defined limits Laborious but no limits Hybrid Cloud Hybrid Cloud is the cloud infrastructure build with the composition of two or more clouds like public and private cloud. Hybrid cloud gives best of the both the world as it combines multiple cloud deployment models together. Cloud and Big Data – Common Characteristics There are many characteristics of the Cloud Architecture and Cloud Computing which are also essentially important for Big Data as well. They highly overlap and at many places it just makes sense to use the power of both the architecture and build a highly scalable framework. Here is the list of all the characteristics of cloud computing important in Big Data Scalability Elasticity Ad-hoc Resource Pooling Low Cost to Setup Infastructure Pay on Use or Pay as you Go Highly Available Leading Big Data Cloud Providers There are many players in Big Data Cloud but we will list a few of the known players in this list. Amazon Amazon is arguably the most popular Infrastructure as a Service (IaaS) provider. The history of how Amazon started in this business is very interesting. They started out with a massive infrastructure to support their own business. Gradually they figured out that their own resources are underutilized most of the time. They decided to get the maximum out of the resources they have and hence they launched their Amazon Elastic Compute Cloud (Amazon EC2) service in 2006. Their products have evolved a lot recently and now it is one of their primary business besides their retail selling. Amazon also offers Big Data services understand Amazon Web Services. Here is the list of the included services: Amazon Elastic MapReduce – It processes very high volumes of data Amazon DynammoDB – It is fully managed NoSQL (Not Only SQL) database service Amazon Simple Storage Services (S3) – A web-scale service designed to store and accommodate any amount of data Amazon High Performance Computing – It provides low-tenancy tuned high performance computing cluster Amazon RedShift – It is petabyte scale data warehousing service Google Though Google is known for Search Engine, we all know that it is much more than that. Google Compute Engine – It offers secure, flexible computing from energy efficient data centers Google Big Query – It allows SQL-like queries to run against large datasets Google Prediction API – It is a cloud based machine learning tool Other Players Besides Amazon and Google we also have other players in the Big Data market as well. Microsoft is also attempting Big Data with the Cloud with Microsoft Azure. Additionally Rackspace and NASA together have initiated OpenStack. The goal of Openstack is to provide a massively scaled, multitenant cloud that can run on any hardware. Thing to Watch The cloud based solutions provides a great integration with the Big Data’s story as well it is very economical to implement as well. However, there are few things one should be very careful when deploying Big Data on cloud solutions. Here is a list of a few things to watch: Data Integrity Initial Cost Recurring Cost Performance Data Access Security Location Compliance Every company have different approaches to Big Data and have different rules and regulations. Based on various factors, one can implement their own custom Big Data solution on a cloud. Tomorrow In tomorrow’s blog post we will discuss about various Operational Databases supporting Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

Read the article

ASP.NET, HTTP 404 and SEO

- by paxer

The other day our SEO Manager told me that he is not happy about the way ASP.NET application return HTTP response codes for Page Not Found (404) situation. I've started research and found interesting things, which could probably help others in similar situation. 1) By default ASP.NET application handle 404 error by using next web.config settings <customErrors defaultRedirect="GenericError.htm" mode="On"> <error statusCode="404" redirect="404.html"/> </customErrors> However this approach has a problem, and this is actually what our SEO manager was talking about. This is what HTTP return to request in case of Page not Found situation. So first of all it return HTTP 302 Redirect code and then HTTP 200 - ok code. The problem : We need to have HTTP 404 response code at the end of response for SEO purposes. Solution 1 Let's change a bit our web.config settings to handle 404 error not on static html page but on .aspx page <customErrors defaultRedirect="GenericError.htm" mode="On"> <error statusCode="404" redirect="404.aspx"/> </customErrors> And now let's add in Page_Load event on 404.aspx page next lines protected void Page_Load(object sender, EventArgs e) { Response.StatusCode = 404; } Now let's run our test again Now it has got better, last HTTP response code is 404, but my SEO manager still was not happy, becouse we still have 302 code before it, and as he said this is bad for Google search optimization. So we need to have only 404 HTTP code alone. Solution 2 Let's comment our web.config settings  Now, let's open our Global.asax file, or if it does not exist in your project - add it. Then we need to add next logic which will detect if server error code is 404 (Page not found) then handle it. protected void Application_Error(object sender, EventArgs e) { Exception ex = Server.GetLastError(); if (ex is HttpException) { if (((HttpException)(ex)).GetHttpCode() == 404) Server.Transfer("~/404.html"); } // Code that runs when an unhandled error occurs Server.Transfer("~/GenericError.htm"); } Cool, now let's start our test again... Yehaa, looks like now we have only 404 HTTP response code, SEO manager and Google are happy and so do i:) Hope this helps!

Read the article

Clean Up the New Ubuntu Grub2 Boot Menu

- by Trevor Bekolay

Ubuntu adopted the new version of the Grub boot manager in version 9.10, getting rid of the old problematic menu.lst. Today we look at how to change the boot menu options in Grub2. Grub2 is a step forward in a lot of ways, and most of the annoying menu.lst issues from the past are gone. Still, if you’re not vigilant with removing old versions of the kernel, the boot list can still end up being longer than it needs to be. Note: You may have to hold the SHIFT button on your keyboard while booting up to get this menu to show. If only one operating system is installed on your computer, it may load it automatically without displaying this menu. Remove Old Kernel Entries The most common clean up task for the boot menu is to remove old kernel versions lying around on your machine. In our case we want to remove the 2.6.32-21-generic boot menu entries. In the past, this meant opening up /boot/grub/menu.lst…but with Grub2, if we remove the kernel package from our computer, Grub automatically removes those options. To remove old kernel versions, open up Synaptic Package Manager, found in the System > Administration menu. When it opens up, type the kernel version that you want to remove in the Quick search text field. The first few numbers should suffice. For each of the entries associated with the old kernel (e.g. linux-headers-2.6.32-21 and linux-image-2.6.32-21-generic), right-click and choose Mark for Complete Removal. Click the Apply button in the toolbar and then Apply in the summary window that pops up. Close Synaptic Package Manager. The next time you boot up your computer, the Grub menu will not contain the entries associated with the removed kernel version. Remove Any Option by Editing /etc/grub.d If you need more fine-grained control, or want to remove entries that are not kernel versions, you must change the files located in /etc/grub.d. /etc/grub.d contains files that hold the menu entries that used to be contained in /boot/grub/menu.lst. If you want to add new boot menu entries, you would create a new file in this folder, making sure to mark it as executable. If you want to remove boot menu entries, as we do, you would edit files in this folder. If we wanted to remove all of the memtest86+ entries, we could just make the 20_memtest86+ file non-executable, with the terminal command sudo chmod –x 20_memtest86+ Followed by the terminal command sudo update-grub Note that memtest86+ was not found by update-grub because it will only consider executable files. However, instead, we’re going to remove the Serial console 115200 entry for memtest86+… Open a terminal window Applications > Accessories > Terminal. In the terminal window, type in the command: sudo gedit /etc/grub.d/20_memtest86+ The menu entries are found at the bottom of this file. Comment out the menu entry for serial console 115200 by adding a “#” to the start of each line. Save and close this file. In the terminal window you opened, enter in the command sudo update-grub Note: If you don’t run update-grub, the boot menu options will not change! Now, the next time you boot up, that strange entry will be gone, and you’re left with a simple and clean boot menu. Conclusion While changing Grub2’s boot menu may seem overly complicated to legacy Grub masters, for normal users, Grub2 means that you won’t have to change the boot menu that often. Fortunately, if you do have to do it, the process is still pretty easy. For more detailed information about how to change entries in Grub2, this Ubuntu forum thread is a great resource. If you’re using an older version of Ubuntu, check out our article on how to clean up Ubuntu grub boot menu after upgrades. Similar Articles Productive Geek Tips Clean Up Ubuntu Grub Boot Menu After UpgradesReinstall Ubuntu Grub Bootloader After Windows Wipes it OutChange the GRUB Menu Timeout on UbuntuHow To Switch to Console Mode for Ubuntu VMware GuestSet Windows as Default OS when Dual Booting Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

Read the article

Oracle Enterprise Data Quality: Ever Integration-ready

- by Mala Narasimharajan

It is closing in on a year now since Oracle’s acquisition of Datanomic, and the addition of Oracle Enterprise Data Quality (EDQ) to the Oracle software family. The big move has caused some big shifts in emphasis and some very encouraging excitement from the field. To give an illustration, combined with a shameless promotion of how EDQ can help to give quick insights into your data, I did a quick Phrase Profile of the subject field of emails to the Global EDQ mailing list since it was set up last September. The results revealed a very clear theme: Integration, Integration, Integration! As well as the important Siebel and Oracle Data Integrator (ODI) integrations, we have been asked about integration with a huge variety of Oracle applications, including EBS, Peoplesoft, CRM on Demand, Fusion, DRM, Endeca, RightNow, and more - and we have not stood still! While it would not have been possible to develop specific pre-integrations with all of the above within a year, we have developed a package of feature-rich out-of-the-box web services and batch processes that can be plugged into any application or middleware technology with ease. And with Siebel, they work out of the box. Oracle Enterprise Data Quality version 9.0.4 includes the Customer Data Services (CDS) pack – a ready set of standard processes with standard interfaces, to provide integrated: Address verification and cleansing Individual matching Organization matching The services can are suitable for either Batch or Real-Time processing, and are enabled for international data, with simple configuration options driving the set of locale-specific dictionaries that are used. For example, large dictionaries are provided to support international name transcription and variant matching, including highly specialized handling for Arabic, Japanese, Chinese and Korean data. In total across all locales, CDS includes well over a million dictionary entries. Excerpt from EDQ’s CDS Individual Name Standardization Dictionary CDS has been developed to replace the OEM of Informatica Identity Resolution (IIR) for attached Data Quality on the Oracle price list, but does this in a way that creates a ‘best of both worlds’ situation for customers, who can harness not only the out-of-the-box functionality of pre-packaged matching and standardization services, but also the flexibility of OEDQ if they want to customize the interfaces or the process logic, without having to learn more than one product. From a competitive point of view, we believe this stands us in good stead against our key competitors, including Informatica, who have separate ‘Identity Resolution’ and general DQ products, and IBM, who provide limited out-of-the-box capabilities (with a steep learning curve) in both their QualityStage data quality and Initiate matching products. Here is a brief guide to the main services provided in the pack: Address Verification and Standardization EDQ’s CDS Address Cleaning Process The Address Verification and Standardization service uses EDQ Address Verification (an OEM of Loqate software) to verify and clean addresses in either real-time or batch. The Address Verification processor is wrapped in an EDQ process – this adds significant capabilities over calling the underlying Address Verification API directly, specifically: Country-specific thresholds to determine when to accept the verification result (and therefore to change the input address) based on the confidence level of the API Optimization of address verification by pre-standardizing data where required Formatting of output addresses into the input address fields normally used by applications Adding descriptions of the address verification and geocoding return codes The process can then be used to provide real-time and batch address cleansing in any application; such as a simple web page calling address cleaning and geocoding as part of a check on individual data. Duplicate Prevention Unlike Informatica Identity Resolution (IIR), EDQ uses stateless services for duplicate prevention to avoid issues caused by complex replication and synchronization of large volume customer data. When a record is added or updated in an application, the EDQ Cluster Key Generation service is called, and returns a number of key values. These are used to select other records (‘candidates’) that may match in the application data (which has been pre-seeded with keys using the same service). The ‘driving record’ (the new or updated record) is then presented along with all selected candidates to the EDQ Matching Service, which decides which of the candidates are a good match with the driving record, and scores them according to the strength of match. In this model, complex multi-locale EDQ techniques can be used to generate the keys and ensure that the right balance between performance and matching effectiveness is maintained, while ensuring that the application retains control of data integrity and transactional commits. The process is explained below: EDQ Duplicate Prevention Architecture Note that where the integration is with a hub, there may be an additional call to the Cluster Key Generation service if the master record has changed due to merges with other records (and therefore needs to have new key values generated before commit). Batch Matching In order to allow customers to use different match rules in batch to real-time, separate matching templates are provided for batch matching. For example, some customers want to minimize intervention in key user flows (such as adding new customers) in front end applications, but to conduct a more exhaustive match on a regular basis in the back office. The batch matching jobs are also used when migrating data between systems, and in this case normally a more precise (and automated) type of matching is required, in order to minimize the review work performed by Data Stewards. In batch matching, data is captured into EDQ using its standard interfaces, and records are standardized, clustered and matched in an EDQ job before matches are written out. As with all EDQ jobs, batch matching may be called from Oracle Data Integrator (ODI) if required. When working with Siebel CRM (or master data in Siebel UCM), Siebel’s Data Quality Manager is used to instigate batch jobs, and a shared staging database is used to write records for matching and to consume match results. The CDS batch matching processes automatically adjust to Siebel’s ‘Full Match’ (match all records against each other) and ‘Incremental Match’ (match a subset of records against all of their selected candidates) modes. The Future The Customer Data Services Pack is an important part of the Oracle strategy for EDQ, offering a clear path to making Data Quality Assurance an integral part of enterprise applications, and providing a strong value proposition for adopting EDQ. We are planning various additions and improvements, including: An out-of-the-box Data Quality Dashboard Even more comprehensive international data handling Address search (suggesting multiple results) Integrated address matching The EDQ Customer Data Services Pack is part of the Enterprise Data Quality Media Pack, available for download at http://www.oracle.com/technetwork/middleware/oedq/downloads/index.html.

Read the article

Algorithmia Source Code released on CodePlex

- by FransBouma

Following the release of our BCL Extensions Library on CodePlex, we have now released the source-code of Algorithmia on CodePlex! Algorithmia is an algorithm and data-structures library for .NET 3.5 or higher and is one of the pillars LLBLGen Pro v3's designer is built on. The library contains many data-structures and algorithms, and the source-code is well documented and commented, often with links to official descriptions and papers of the algorithms and data-structures implemented. The source-code is shared using Mercurial on CodePlex and is licensed under the friendly BSD2 license. User documentation is not available at the moment but will be added soon. One of the main design goals of Algorithmia was to create a library which contains implementations of well-known algorithms which weren't already implemented in .NET itself. This way, more developers out there can enjoy the results of many years of what the field of Computer Science research has delivered. Some algorithms and datastructures are known in .NET but are re-implemented because the implementation in .NET isn't efficient for many situations or lacks features. An example is the linked list in .NET: it doesn't have an O(1) concat operation, as every node refers to the containing LinkedList object it's stored in. This is bad for algorithms which rely on O(1) concat operations, like the Fibonacci heap implementation in Algorithmia. Algorithmia therefore contains a linked list with an O(1) concat feature. The following functionality is available in Algorithmia: Command, Command management. This system is usable to build a fully undo/redo aware system by building your object graph using command-aware classes. The Command pattern is implemented using a system which allows transparent undo-redo and command grouping so you can use it to make a class undo/redo aware and set properties, use its contents without using commands at all. The Commands namespace is the namespace to start. Classes you'd want to look at are CommandifiedMember, CommandifiedList and KeyedCommandifiedList. See the CommandQueueTests in the test project for examples. Graphs, Graph algorithms. Algorithmia contains a sophisticated graph class hierarchy and algorithms implemented onto them: non-directed and directed graphs, as well as a subgraph view class, which can be used to create a view onto an existing graph class which can be self-maintaining. Algorithms include transitive closure, topological sorting and others. A feature rich depth-first search (DFS) crawler is available so DFS based algorithms can be implemented quickly. All graph classes are undo/redo aware, as they can be set to be 'commandified'. When a graph is 'commandified' it will do its housekeeping through commands, which makes it fully undo-redo aware, so you can remove, add and manipulate the graph and undo/redo the activity automatically without any extra code. If you define the properties of the class you set as the vertex type using CommandifiedMember, you can manipulate the properties of vertices and the graph contents with full undo/redo functionality without any extra code. Heaps. Heaps are data-structures which have the largest or smallest item stored in them always as the 'root'. Extracting the root from the heap makes the heap determine the next in line to be the 'maximum' or 'minimum' (max-heap vs. min-heap, all heaps in Algorithmia can do both). Algorithmia contains various heaps, among them an implementation of the Fibonacci heap, one of the most efficient heap datastructures known today, especially when you want to merge different instances into one. Priority queues. Priority queues are specializations of heaps. Algorithmia contains a couple of them. Sorting. What's an algorithm library without sort algorithms? Algorithmia implements a couple of sort algorithms which sort the data in-place. This aspect is important in situations where you want to sort the elements in a buffer/list/ICollection in-place, so all data stays in the data-structure it already is stored in. PropertyBag. It re-implements Tony Allowatt's original idea in .NET 3.5 specific syntax, which is to have a generic property bag and to be able to build an object in code at runtime which can be bound to a property grid for editing. This is handy for when you have data / settings stored in XML or other format, and want to create an editable form of it without creating many editors. IEditableObject/IDataErrorInfo implementations. It contains default implementations for IEditableObject and IDataErrorInfo (EditableObjectDataContainer for IEditableObject and ErrorContainer for IDataErrorInfo), which make it very easy to implement these interfaces (just a few lines of code) without having to worry about bookkeeping during databinding. They work seamlessly with CommandifiedMember as well, so your undo/redo aware code can use them out of the box. EventThrottler. It contains an event throttler, which can be used to filter out duplicate events in an event stream coming into an observer from an event. This can greatly enhance performance in your UI without needing to do anything other than hooking it up so it's placed between the event source and your real handler. If your UI is flooded with events from data-structures observed by your UI or a middle tier, you can use this class to filter out duplicates to avoid redundant updates to UI elements or to avoid having observers choke on many redundant events. Small, handy stuff. A MultiValueDictionary, which can store multiple unique values per key, instead of one with the default Dictionary, and is also merge-aware so you can merge two into one. A Pair class, to quickly group two elements together. Multiple interfaces for helping with building a de-coupled, observer based system, and some utility extension methods for the defined data-structures. We regularly update the library with new code. If you have ideas for new algorithms or want to share your contribution, feel free to discuss it on the project's Discussions page or send us a pull request. Enjoy!

Read the article

Building a Distributed Commerce Infrastructure in the Cloud using Azure and Commerce Server

- by Lewis Benge

One of the biggest questions I routinely get asked is how scalable Commerce Server is. Of course the text book answer is the product has been around for 10 years, powers some of the largest e-Commerce websites in the world, so it scales horizontally extremely well. One argument however though is what if you can't predict the growth of demand required of your Commerce Platform, or need the ability to scale up during busy seasons such as Christmas for a retail environment but are hesitant on maintaining the infrastructure on a year-round basis? The obvious answer is to utilise the many elasticated cloud infrastructure providers that are establishing themselves in the ever-growing market, the problem however is Commerce Server is still product which has a legacy tightly coupled dependency on Windows and IIS components. Commerce Server 2009 codename "R2" however introduced to the concept of an n-tier deployment of Microsoft Commerce Server, meaning you are no longer tied to core objects API but instead have serializable Commerce Entity objects, and business logic allowing for Commerce Server to now be built into a WCF-based SOA architecture. Presentation layers no-longer now need to remain on the same physical machine as the application server, meaning you can now build the user experience into multiple-technologies and host them in multiple places – leveraging the transport benefits that a WCF service may bring, such as message queuing, security, and multiple end-points. All of this logic will still need to remain in your internal infrastructure, for two reasons. Firstly cloud based computing infrastructure does not support PCI security requirements, and secondly even though many of the legacy Commerce Server dependencies have been abstracted away within this version of the application, it is still not a fully supported to be deployed exclusively into the cloud. If you do wish to benefit from the scalability of the cloud however, you can still achieve a great Commerce Server and Azure setup by utilising both the Azure App Fabric in terms of the service bus, and authentication services and Windows Azure to host any online presence you may require. The architecture would be something similar to this: This setup would allow you to construct your Commerce Services as part of your on-site infrastructure. These services would contain all of the channels custom business logic, and provide the overall interface back into the underlying Commerce Server components. It would be recommended that services are constructed around the specific business domain of the application, which based on your business model would usually consist of separate services around Catalogue, Orders, Search, Profiles, and Marketing. The App Fabric service bus is then used to abstract and aggregate further the services, making them available to the cloud and subsequently secured by App Fabrics authentication services. These services are now available for consumption by any client, using any supported technology – not just .NET. Thus meaning you are now able to construct apps for IPhone, integrate with Java based POS Devices, and any many other potential uses. This aggregation is useful, and forms the basis of the further strategy around diversifying and enhancing the e-Commerce experience, but also provides the foundation for the scalability we want to gain from utilising a cloud-based application platform. The Windows Azure application platform is Microsoft solution to benefiting from the true economies of scale in terms of the elasticity of the cloud. Just before the launch of the Azure Platform – Domino's pizza actually managed to run their whole SuperBowl operation from the scalability of Windows Azure, and simply switching back to their traditional operation the next day with no residual infrastructure costs. The platform also natively can subscribe to services and messages exposed within the AppFabric service bus, making it an ideal solution to build and deploy a presentation layer which will need to support of scalable infrastructure – such as a high demand public facing e-Commerce portal, or a promotion element of a brand. Windows Azure has excellent support for ASP.NET, including its own caching providers meaning expensive operations such as catalogue queries can persist in memory on the application server, reducing the demand on internal infrastructure and prioritising it for more business critical operations such as receiving orders and processing payments. Windows Azure also supports other languages too, meaning utilising this approach you can technically build a Commerce Server presentation layer in Java, PHP, or Ruby – or equally in ASP.NET or Silverlight without having to change any of the underlying business or Commerce Server implementation. This SOA-style architecture is one of the primary differentiators for Commerce Server as a product in the e-Commerce market, and now with the introduction of a WCF capability in Commerce Server 2009/2009 R2 the opportunities for extensibility of the both the user experience, and integration into third parties, are drastically increased, all with no effect to the underlying channel logic. So if you are looking at deployment options for your e-Commerce application to help support demand in a cost effective way. I would highly recommend you consider looking at Windows Azure, and if you have any questions in-particular about this style of deployment, please feel free to get in touch!

Read the article

Training on Demand Certification Packages for DBAs

- by Antoinette O'Sullivan

The demand for Database Administrators continues to grow.*Almost two-thirds of IT hiring managers indicate that they highly value certifications in validatingIT skills and expertise.** * Job satisfaction and DBA work growth rate: CNN Money's 2011 Best Jobs in America survey.** Survey among nearly 1,700 respondents by CompTIA, the nonprofit trade association for the IT industry, cited in Certification Magazine, Feb. 14 th., 2012. Get Certified with Training on DemandAre you an experienced Database professional eager to achieve certification?Is time your most precious resource?Then try our new Training On Demand Certification Value Package with 20% discount. These all-in-one packages give you everything you need to get certified with success: Why Training On Demand: Expert training from Oracle’s top instructors Sophisticated streaming video recording Available for 90 days, 24 hours a day, 7 days a week White boarding and training labs for hands-on experience Start, stop, pause, jump or rewind sections of the course as needed Oracle University instructor Q&A A full-text search leads to the right video fragment in a matter of seconds. Watch this demo to see how it works. Additional Certification resources: Benefits of Oracle Certification Database Certification Paths Available Database Certification Exams Getting certified has never been easier!For assistance contact your local Oracle University Service Desk. Many organizations deploy both Oracle Database and MySQL side by side to serve different needs, and as a database professional you can find training courses on both topics at Oracle University! Check out the upcoming Oracle Database 11g training courses and MySQL training courses. Even if you're only managing Oracle Databases at this point of time, getting familiar with MySQL Database will broaden your career path with growing job demand. These Value Packages are also available with the following training formats: In-Class, Live Virtual Class and Self Study: MySQL Database Administration Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand MySQL Database Administrator Certification Value Package View Package View Package View Package View Package MySQL Developer Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand MySQL Developer Certification Value Package View Package View Package Oracle Database 10g Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand Oracle Database 10g Administrator Certified Associate Certification Value Package View Package View Package View Package Oracle Database 10g Administrator Certified Professional Certification Value Package View Package View Package View Package Oracle Database 11g Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand Oracle Database 11g Administrator Certified Associate Certification Value Package View Package View Package View Package View Package Oracle Database 11g Administrator Certified Professional Certification Value Package View Package View Package View Package View Package Exam Prep Seminar Value Package: Oracle Database Admin 1 View Package Oracle Database 11g Administrator Certified Professional UPGRADE Certification Value Package View Package Oracle Real Application Clusters 11g and Grid Infrastructure Administraton Certified Expert Certification Value Package View Package Exam Prep Seminar Value Package: Oracle Database Admin 2 View Package Exam Prep Seminar Value Package: Oracle RAC 11g and Grid Infrastructure Administration View Package Exam Prep Seminar Value Package: Upgrade Oracle Certified Professional (OCP) to Oracle Database 11g View Package SQL and PL/SQL Value Packages Your Savings plus get a FREE Retake save 5% save 20% save 20% save 20% In Class Edition Live Virtual Class Edition Self-Study Edition Training On Demand Oracle Database Sql Expert Certification Value Package View Package View Package View Package View Package Exam Prep Seminar Value Package: Oracle Database SQL View Package View our Certification Value Packages Mention this code at the time of booking: E1245 Connect For a full list of MySQL Training courses and events, go to http://oracle.com/education/mysql.

Read the article

Edit Media Center TV Recordings with Windows Live Movie Maker

- by DigitalGeekery

Have you ever wanted to take a TV program you’ve recorded in Media Center and remove the commercials or save clips of favorite scenes? Today we’ll take a look at editing WTV and DVR-MS files with Windows Live Movie Maker. Download and Install Windows Live Movie Maker. The download link can be found at the end of the article. WLMM is part of Windows Live Essentials, but you can choose to install only the applications you want. You’ll also want to be sure to uncheck any unwanted settings like settings Bing as default search provider or MSN as your browser home page. Add your recorded TV file to WLMM by clicking the Add videos and photos button, or by dragging and dropping it onto the storyboard. You’ll see your video displayed in the Preview window on the left and on the storyboard. Adjust the Zoom Time Scale slider at the lower right to change the level of detail displayed on the storyboard. You may want to start zoomed out and zoom in for more detailed edits. Removing Commercials or Unwanted Sections Note: Changes and edits made in Windows Live Movie Maker do not change or effect the original video file. To accomplish this, we will makes cuts, or “splits,” and the beginning and end of the section we want to remove, and then we will delete that section from our project. Click and drag the slider bar along the the storyboard to scroll through the video. When you get to the end of a row in on the storyboard, drag the slider down to the beginning of the next row. We’ve found it easiest and most accurate to get close to the end of the commercial break and then use the Play button and the Previous Frame and Next Frame buttons underneath the Preview window to fine tune your cut point. When you find the right place to make your first cut, click the split button on the Edit tab on the ribbon. You will see your video “split” into two sections. Now, repeat the process of scrolling through the storyboard to find the end of the section you wish to cut. When you are at the proper point, click the Split button again. Now we’ll delete that section by selecting it and pressing the Delete key, selecting remove on the Home tab, or by right clicking on the section and selecting Remove. Trim Tool This tool allows you to select a portion of the video to keep while trimming away the rest. Click and drag the sliders in the preview windows to select the area you want to keep. The area outside the sliders will be trimmed away. The area inside is the section that is kept in the movie. You can also adjust the Start and End points manually on the ribbon. Delete any additional clips you don’t want in the final output. You can also accomplish this by using the Set start point and Set end point buttons. Clicking Set start point will eliminate everything before the start point. Set end point will eliminate everything after the end point. And you’re left with only the clip you want to keep. Output your Video Select the icon at the top left, then select Save movie. All of these settings will output your movie as a WMV file, but file size and quality will vary by setting. The Burn to DVD option also outputs a WMV file, but then opens Windows DVD Maker and prompts you to create and burn a DVD. Conclusion WLMM is one of the few applications that can edit WTV files, and it’s the only one we’re aware of that’s free. We should note only WTV and DVR-MS files will appear in the Recorded TV library in Media Center, so if you want to view your WMV output file in WMC you’ll need to add it to the Video or Movie library. Would you like to learn more about Windows Live Movie Maker? Check out are article on how to turn photos and home videos into movies with Windows Live Movie Maker. Need to add videos from a network location? WLMM doesn’t allow this by default, but you check out how to add network support to Windows Live Move Maker. Download Windows Live Similar Articles Productive Geek Tips Rotate a Video 90 degrees with VLC or Windows Live Movie MakerHow to Make/Edit a movie with Windows Movie Maker in Windows VistaFamily Fun: Share Photos with Photo Gallery and Windows Live SpacesAutomatically Mount and View ISO files in Windows 7 Media CenterAutomatically Start Windows 7 Media Center in Live TV Mode TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor

Search Results

Search found 20088 results on 804 pages for 'binary search trees'.

Page 764/804 | < Previous Page | 760 761 762 763 764 765 766 767 768 769 770 771 | Next Page >

- by Mysticgeek

- by Jason Fitzpatrick

- by jamiet

- by Georgi Kodinov

- by Mysticgeek

- by Elie Wazen

- by Gopinath

- by thatjeffsmith

- by Trevor Bekolay

- by Matthew Guay

- by rajbk

- by Frank Nimphius

- by gperera

- by Matthew Guay

- by Matthew Guay

- by Pinal Dave

- by paxer

- by Trevor Bekolay

- by Mala Narasimharajan

- by FransBouma

- by Lewis Benge

- by Antoinette O'Sullivan

- by DigitalGeekery

< Previous Page | 760 761 762 763 764 765 766 767 768 769 770 771 | Next Page >