memory error - Page 765

JAR files, don't they just bloat and slow Java down?

- by Josamoto

Okay, the question might seem dumb, but I'm asking it anyways. After struggling for hours to get a Spring + BlazeDS project up and running, I discovered that I was having problems with my project as a result of not including the right dependencies for Spring etc. There were .jars missing from my WEB-INF/lib folder, yes, silly me. After a while, I managed to get all the .jar files where they belong, and it comes at a whopping 12.5MB at that, and there's more than 30 of them! Which concerns me, but it probably and hopefully shouldn't be concerned. How does Java operate in terms of these JAR files, they do take up quite a bit of hard drive space, taking into account that it's compressed and compiled source code. So that can really quickly populate a lot of RAM and in an instant. My questions are: Does Java load an entire .jar file into memory when say for instance a class in that .jar is instantiated? What about stuff that's in the .jar that never gets used. Do .jars get cached somehow, for optimized application performance? When a single .jar is loaded, I understand that the thing sits in memory and is available across multiple HTTP requests (i.e. for the lifetime of the server instance running), unlike PHP where objects are created on the fly with each request, is this assumption correct? When using Spring, I'm thinking, I had to include all those fiddly .jars, wouldn't I just be better off just using native Java, with say at least and ORM solution like Hibernate? So far, Spring just took extra time configuring, extra hard drive space, extra memory, cpu consumption, so I'm concerned that the framework is going to cost too much application performance just to get for example, IoC implemented with my BlazeDS server. There still has to come ORM, a unit testing framework and bits and pieces here and there. It's just so easy to bloat up a project quickly and irresponsibly easily. Where do I draw the line?

Read the article

How to limit TCP writes to particular size and then block untlil the data is read

- by ustulation

{Qt 4.7.0 , VS 2010} I have a Server written in Qt and a 3rd party client executable. Qt based server uses QTcpServer and QTcpSocket facilities (non-blocking). Going through the articles on TCP I understand the following: the original implementation of TCP mentioned the negotiable window size to be a 16-bit value, thus maximum being 65535 bytes. But implementations often used the RFC window-scale-extension that allows the sliding window size to be scalable by bit-shifting to yield a maximum of 1 gigabyte. This is implementation defined. This could have resulted in majorly different window sizes on receiver and sender end as the server uses Qt facilities without hardcoding any window size limit. Client 1st asks for all information it can based on the previous messages from the server before handling the new (accumulating) incoming messages. So at some point Server receives a lot of messages each asking for data of several MB's. This the server processes and puts it into the sender buffer. Client however is unable to handle the messages at the same pace and it seems that client’s receiver buffer is far smaller (65535 bytes maybe) than sender’s transmit window size. The messages thus get accumulated at sender’s end until the sender’s buffer is full too after which the TCP writes on sender would block. This however does not happen as sender buffer is much larger. Hence this manifests as increase in memory consumption on the sender’s end. To prevent this from happening, I used Qt’s socket’s waitForBytesWritten() with timeout set to -1 for infinite waiting period. This as I see from the behaviour blocks the thread writing TCP data until the data has actually been sensed by the receiver’s window (which will happen when earlier messages have been processed by the client at application level). This has caused memory consumption at Server end to be almost negligible. is there a better alternative to this (in Qt) if i want to restrict the memory consumption at server end to say x MB's? Also please point out if any of my understandings is incorrect.

Read the article

Quickly accessing files in a 'project'

- by bbbscarter

Hi all. I'm looking for a way to quickly open files in my project's source tree. What I've been doing so far is adding files to the file-name-cache like so: (file-cache-add-directory-recursively (concat project-root "some/sub/folder") ".*\\.\$py\$$") after which I can use anything-for-files to access any file in the source tree with about 4 keystrokes. Unfortunately, this solution started falling over today. I've added another folder to the cache and emacs has started running out of memory. What's weird is that this folder contains less than 25% of files I'm adding, and yet emacs memory use goes up from 20mb to 400mb on adding just this folder. The total number of files is around 2000, so this memory use seems very high. Presumably I'm abusing the file cache. Anyway, what do other people do for this? I like this solution for its simplicity and speed; I've looked at some of the many, many project management packages for emacs and none of them really grabbed me... Thanks in advance! Simon

Read the article

Split UInt32 (audio frame) into two SInt16s (left and right)?

- by morgancodes

Total noob to anything lower-level than Java, diving into iPhone audio, and realing from all of the casting/pointers/raw memory access. I'm working with some example code wich reads a WAV file from disc and returns stereo samples as single UInt32 values. If I understand correctly, this is just a convenient way to return the 32 bits of memory required to create two 16 bit samples. Eventually this data gets written to a buffer, and an audio unit picks it up down the road. Even though the data is written in UInt32-sized chunks, it eventually is interpreted as pairs of 16-bit samples. What I need help with is splitting these UInt32 frames into left and right samples. I'm assuming I'll want to convert each UInt32 into an SInt16, since an audio sample is a signed value. It seems to me that for efficiency's sake, I ought to be able to simply point to the same blocks in memory, and avoid any copying. So, in pseudo-code, it would be something like this: UInt32 myStereoFrame = getFramefromFilePlayer; SInt16* leftChannel = getFirst16Bits(myStereoFrame); SInt16* rightChannel = getSecond16Bits(myStereoFrame); Can anyone help me turn my pseudo into real code?

Read the article

Loading more than 10 images on iPhone??

- by SeniorLee

I'm trying to add more than 10 pictures on ScrollView. NSUInteger i; for (i = 1; i <= numberOfImage; i++) { NSString *imageName = [NSString stringWithFormat:@"d%dimage%d.png", imageSection, i]; UIImage *image = [UIImage imageNamed:imageName]; UIImageView *imageView = [[UIImageView alloc] initWithImage:image]; // setup each frame to a default height and width, it will be properly placed when we call "updateScrollList" CGRect rect = imageView.frame; rect.size.height = kScrollObjHeight; rect.size.width = kScrollObjWidth; imageView.frame = rect; imageView.tag = i; // tag our images for later use when we place them in serial fashion [scrollView addSubview:imageView]; [imageView release]; } This code is from Apple example and it works fine. But if the variable 'i' is bigger than 10, 'UIImage *image' is empty. The imageName seems to correct. But I don't know why it does not load image. Does anybody sees the problem?? And one more thing. If I do like that, does iOS controls memory automatically? I mean it's kind of wasting memory if all (more than 10) images are loaded on memory even they are not displayed. I've heard that iOS loads images only displayed on screen and free images those are not displayed. Is that right? Thanks for reading.

Read the article

Best tree/heap data structure for fixed set of nodes with changing values + need top 20 values?

- by user350139

I'm writing something like a game in C++ where I have a database table containing the current score for each user. I want to read that table into memory at the start of the game, quickly change each user's score while the game is being played in response to what each user does, and then when the game ends write the current scores back to the database. I also want to be able to find the 20 or so users with the highest scores. No users will be added or deleted during the short period when the game is being played. I haven't tried it yet, but updating the database might take too much time during the period when the game is being played. Fixed set of users (might be 10,000 to 50,000 users) Will map user IDs to their score and other user-specific information. User IDs will be auto_increment values. If the structure has a high memory overhead that's probably not an issue. If the program crashes during gameplay it can just be re-started. Quickly get a user's current score. Quickly add to a user's current score (and return their current score) Quickly get 20 users with highest score. No deletes. No inserts except when the structure is first created, and how long that takes isn't critical. Getting the top 20 users will only happen every five or ten seconds, but getting/adding will happen much more frequently. If not for the last, I could just create a memory block equal to sizeof(user) * max(user id) and put each user at user id * sizeof(user) for fast access. Should I do that plus some other structure for the Top 20 feature, or is there one structure that will handle all of this together?

Read the article

Storing large numbers of varying size objects on disk

- by Foredecker

I need to develop a system for storing large numbers (10's to 100's of thousands) of objects. Each object is email-like - there is a main text body, and several ancillary text fields of limited size. A body will be from a few bytes, to several KB in size. Each item will have a single unique ID (probably a GUID) that identifies it. The store will only be written to when an object is added to it. It will be read often. Deletions will be rare. The data is almost all human readable text so it will be readily compressible. A system that lets me issue the I/Os and mange the memory and caching would be ideal. I'm going to keep the indexes in memory, using it to map indexes to the single (and primary) key for the objects. Once I have the key, then I'll load it from disk, or the cache. The data management system needs to be part of my application - I do not want to depend on OS services. Or separately installed packages. Native (C++) would be best, but a manged (C#) thing would be ok. I believe that a database is an obvious choice, but this needs to be super-fast for look up and loading into memory of an object. I am not experienced with data base tech and I'm concerned that general relational systems will not handle all this variable sized data efficiently. (Note, this has nothing to do with my job - its a personal project.) In your experience, what are the viable alternatives to a traditional relational DB? Or would a DB work well for this?

Read the article

Testing paginated UIScrollView on iPad

- by Piotr Czapla

I'm creating a magazine reader (something like iGizmo on iPad). I have two scrollviews one that paginate over articles and second to paginate inside of an article through pages. I'd like to check memory usage of my app after scrolling through 20 pages. To do so I decided to create an automated ui test that scrolls 20 times right and the check the memory foot print at the end of the test. I need that info to have some metrics before I start optimizing the memory usage And Here is the thing: I can't make the ui automation to pass to the second page. My automation code looks like that: var window = UIATarget.localTarget().frontMostApp().mainWindow(); var articleScrollView = window.scrollViews()[0]; articleScrollView.scrollRight(); // do you know any command to wait until first scrolls ends? articleScrollView.scrollRight(); // this one doesn't work I guess that I need to wait for the first scorlling to end before I can run another one, but I don't know how to do that as each page is just an image. (I don't have anything else on pages yet) Any idea?

Read the article

Criteria for triggering garbage collection in .Net

- by Kennet Belenky

I've come across some curious behavior with regard to garbage collection in .Net. The following program will throw an OutOfMemoryException very quickly (after less than a second on a 32-bit, 2GB machine). The Foo finalizer is never called. class Foo { static Dictionary<Guid, WeakReference> allFoos = new Dictionary<Guid, WeakReference>(); Guid guid = Guid.NewGuid(); byte[] buffer = new byte[1000000]; static Random rand = new Random(); public Foo() { // Uncomment the following line and the program will run forever. // rand.NextBytes(buffer); allFoos[guid] = new WeakReference(this); } ~Foo() { allFoos.Remove(guid); } static public void Main(string args[]) { for (; ; ) { new Foo(); } } } If the rand.nextBytes line is uncommented, it will run ad infinitum, and the Foo finalizer is regularly invoked. Why is that? My best guess is that in the former case, either the CLR or the Windows VMM is lazy about allocating physical memory. The buffer never gets written to, so the physical memory is never used. When the address space runs out, the system crashes. In the latter case, the system runs out of physical memory before it runs out of address space, the GC is triggered and the objects are collected. However, here's the part I don't get. Assuming my theory is correct, why doesn't the GC trigger when the address space runs low? If my theory is incorrect, then what's the real explanation?

Read the article

Help Me With This MS-Access Query

- by yae

I have 2 tables: "products" and "pieces" PRODUCTS idProd product price PIECES id idProdMain idProdChild quant idProdMain and idProdChild are related with the table: "products". Other considerations is that 1 product can have some pieces and 1 product can be a piece. Price product equal a sum of quantity * price of all their pieces. "Products" table contains all products (p EXAMPLE: TABLE PRODUCTS (idProd - product - price) 1 - Computer - 300€ 2 - Hard Disk - 100€ 3 - Memory - 50€ 4 - Main Board - 100€ 5 - Software - 50€ 6 - CDroms 100 un. - 30€ TABLE PIECES (id - idProdMain - idProdChild - Quant.) 1 - 1 - 2 - 1 2 - 1 - 3 - 2 3 - 1 - 4 - 1 WHAT I NEED? I need update the price of the main product when the price of the product child (piece) is changed. Following the previous example, if I change the price of this product "memory" (is a piece too) to 60€, then product "Computer" will must change his price to 320€ How I can do it using queries? Already I have tried this to obtain the price of the main product, but not runs. This query not returns any value: SELECT Sum(products.price*pieces.quant) AS Expr1 FROM products LEFT JOIN pieces ON (products.idProd = pieces.idProdChild) AND (products.idProd = pieces.idProdChild) AND (products.idProd = pieces.idProdMain) WHERE (((pieces.idProdMain)=5)); MORE INFO The table "products" contains all the products to sell that it is in the shop. The table "pieces" is to take a control of the compound products. To know those who are the products children. For example of compound product: computers. This product is composed by other products (motherboard, hard disk, memory, cpu, etc.)

Read the article

Declaring two large 2d arrays gives segmentation fault.

- by pfdevil

Hello, i'm trying to declare and allocate memory for two 2d-arrays. However when trying to assign values to itemFeatureQ[39][16816] I get a segmentation vault. I can't understand it since I have 2GB of RAM and only using 19MB on the heap. Here is the code; double** reserveMemory(int rows, int columns) { double **array; int i; array = (double**) malloc(rows * sizeof(double *)); if(array == NULL) { fprintf(stderr, "out of memory\n"); return NULL; } for(i = 0; i < rows; i++) { array[i] = (double*) malloc(columns * sizeof(double *)); if(array == NULL) { fprintf(stderr, "out of memory\n"); return NULL; } } return array; } void populateUserFeatureP(double **userFeatureP) { int x,y; for(x = 0; x < CUSTOMERS; x++) { for(y = 0; y < FEATURES; y++) { userFeatureP[x][y] = 0; } } } void populateItemFeatureQ(double **itemFeatureQ) { int x,y; for(x = 0; x < FEATURES; x++) { for(y = 0; y < MOVIES; y++) { printf("(%d,%d)\n", x, y); itemFeatureQ[x][y] = 0; } } } int main(int argc, char *argv[]){ double **userFeatureP = reserveMemory(480189, 40); double **itemFeatureQ = reserveMemory(40, 17770); populateItemFeatureQ(itemFeatureQ); populateUserFeatureP(userFeatureP); return 0; }

Read the article

Clarification on ZVals

- by Beachhouse

I was reading this: http://www.dereleased.com/2011/04/27/the-importance-of-zvals-and-circular-references/ And there's an example that lost me a bit. $foo = &$bar; $bar = &$foo; $baz = 'baz'; $foo = &$baz; var_dump($foo, $bar); /* string(3) "baz" NULL */ If you’ve been following along, this should make perfect sense. $foo is created, and pointed at a ZVal location identified by $bar; when $bar is created, it points at the same place $foo was pointed. That location, of course, is null. When $foo is reassigned, the only thing that changes is to which ZVal $foo points; if we had assigned a different value to $foo first, then $bar would still retain that value. I learned to program in C. I understand that PHP is different and it uses ZVals instead of memory locations as references. But when you run this code: $foo = &$bar; $bar = &$foo; It seems to me that there would be two ZVals. In C there would be two memory locations (and the values would be of the opposite memory location). Can someone explain?

Read the article

learning C++ from java, trying to make a linked list.

- by kyeana

I just started learning c++ (coming from java) and am having some serious problems with doing anything :P Currently, i am attempting to make a linked list, but must be doing something stupid cause i keep getting "void value not ignored as it ought to be" compile errors (i have it marked where it is throwing it bellow). If anyone could help me with what im doing wrong, i would be very grateful :) Also, I am not used to having the choice of passing by reference, address, or value, and memory management in general (currently i have all my nodes and the data declared on the heap). If anyone has any general advice for me, i also wouldn't complain :P Key code from LinkedListNode.cpp LinkedListNode::LinkedListNode() { //set next and prev to null pData=0; //data needs to be a pointer so we can set it to null for //for the tail and head. pNext=0; pPrev=0; } /* * Sets the 'next' pointer to the memory address of the inputed reference. */ void LinkedListNode::SetNext(LinkedListNode& _next) { pNext=&_next; } /* * Sets the 'prev' pointer to the memory address of the inputed reference. */ void LinkedListNode::SetPrev(LinkedListNode& _prev) { pPrev=&_prev; } //rest of class Key code from LinkedList.cpp #include "LinkedList.h" LinkedList::LinkedList() { // Set head and tail of linked list. pHead = new LinkedListNode(); pTail = new LinkedListNode(); /* * THIS IS WHERE THE ERRORS ARE. */ *pHead->SetNext(*pTail); *pTail->SetPrev(*pHead); } //rest of class

Read the article

JS best practice for member functions

- by MickMalone1983

I'm writing a little mobile games library, and I'm not sure the best practice for declaring member functions of instantiated function objects. For instance, I might create a simple object with one property, and a method to print it: function Foo(id){ this.id = id; this.print = function(){ console.log(this.id); }; }; However, a function which does not need access to 'private' members of the function does not need to be declared in the function at all. I could equally have written: function print(){ console.log(this.id); }; function Foo(id){ this.id = id; this.print = print; }; When the function is invoked through an instance of Foo, the instance becomes the context for this, so the output is the same in either case. I'm not entirely sure how memory is allocated with JS, and I can't find anything that I can understand about something this specific, but it seems to me that with the first example all members of Foo, including the print function, are duplicated each time it is instantiated - but with the second, it just gets a pointer to one, pre-declared function, which would save any more memory having to be allocated as more instances of Foo are created. Am I correct, and if I am, is there any memory/performance benefit to doing this?

Read the article

Linq based generic alternate to Predicate<T>?

- by Eric

I have an interface called ICatalog as shown below where each ICatalog has a name and a method that will return items based on a Predicate<Item> function. public interface ICatalog { string Name { get; } IEnumerable<IFamily> GetItems(Predicate<Item> predicate); } A specific implementation of a catalog may be linked to catalogs in various format such as XML, or a SQL database. With an XML catalog I end up deserializing the entire XML file into memory, so testing each item with the predicate function does does not add a whole lot more overhead as it's already in memory. Yet with the SQL implementation I'd rather not retrieve the entire contents of the database into memory, and then filter the items with the predicate function. Instead I'd want to find a way to somehow pass the predicate to the SQL server, or somehow convert it to a SQL query. This seems like a problem that can be solved with Linq, but I'm pretty new to it. Should my interface return IQueryable instead?

Read the article

Why isn't my leak detected by Xcode Intrumensts?

- by Arlaharen

I am trying to analyze some code of mine, looking for memory leaks. My problem is that some of my objects are leaking (at least as far as I can see), but the Leaks tool doesn't detect the leaks. My guess is that some iPhone OS object still holds pointers to my leaked objects. The objects I am talking about are subclasses of UIViewController that I use like this: MyController *controller = [[MyController alloc] initWithNibName:@"MyController" bundle:nil]; [self.navigationController pushViewController:controller animated:YES]; When these objects are no longer needed I do: [self.navigationController popViewControllerAnimated:YES]; Without a [controller release] call right now. Now when I look at what objects that gets created I see a lot of MyController instances that never gets destroyed. To me these are memory leaks, but to the Leaks tool they are not. Can someone here tell me if there is some way Instruments can tell me what objects are pointing to my MyController instances and thereby making them not count as memory leaks? Or better yet, tell me why these leaks are not detecetd.

Read the article

Footprint of Lua on a PPC Micro

- by Adam Shiemke

We're developing some code on Freescale PPC micros (5517 and 5668 at the moment), and I was wondering if we could put Lua on them. The devices need to be easily programmed/reconfigured in the field, and the current product uses a proprietary interpreted logic language that can be loaded in, and our software (written in C) runs an interpreter. I would like to move to a better language (the implementation is a bit buggy and slow), so I'm considering Lua, but the memory footprint must be very low. For the 5517 (which we may not use), the maximum RAM is 80K. Things are better on the 5668, with 592K of RAM. So does anyone know if I can put Lua on bare metal? We're effectively not running an OS. If so, are there any estimates on what kind of memory footprint we might see? How much effort it would take? Failing this, does anyone know of any kind of interpreter that might be better in a memory-constrained environment without an OS? Or are we better just rolling our own?

Read the article

WTSQuerySessionInformation returning empty strings

- by Benj

I've written a program which should query the Terminal Services API and print out some state information about the sessions running on a terminal services box. I'm using the WTSQuerySessionInformation function to do this and it's returning some data but most of the data seems to be missing... Does anyone know why? Here's my program: void WTSGetString( HANDLE serverHandle, DWORD sessionid, WTS_INFO_CLASS command, wchar_t* commandStr) { DWORD bytesReturned = 0; LPTSTR pData = NULL; if (WTSQuerySessionInformation(serverHandle, sessionid, command, &pData, &bytesReturned)) { wprintf(L"\tWTSQuerySessionInformationW - session %d - %s returned \"%s\"\n", sessionid, commandStr, pData); } else { wprintf(L"\tWTSQuerySessionInformationW - session %d - %s failed - error=%d - ", sessionid, commandStr, GetLastError()); printLastError(NULL, GetLastError()); } WTSFreeMemory(pData); } void ExtractFromWTS( HANDLE serverHandle, DWORD sessionid ) { WTSGetString(serverHandle, sessionid, WTSInitialProgram, L"WTSInitialProgram"); WTSGetString(serverHandle, sessionid, WTSApplicationName, L"WTSApplicationName"); WTSGetString(serverHandle, sessionid, WTSWorkingDirectory, L"WTSWorkingDirectory"); WTSGetString(serverHandle, sessionid, WTSOEMId, L"WTSOEMId"); WTSGetString(serverHandle, sessionid, WTSSessionId, L"WTSSessionId"); WTSGetString(serverHandle, sessionid, WTSUserName, L"WTSUserName"); WTSGetString(serverHandle, sessionid, WTSWinStationName, L"WTSWinStationName"); WTSGetString(serverHandle, sessionid, WTSDomainName, L"WTSDomainName"); WTSGetString(serverHandle, sessionid, WTSConnectState, L"WTSConnectState"); WTSGetString(serverHandle, sessionid, WTSClientBuildNumber, L"WTSClientBuildNumber"); WTSGetString(serverHandle, sessionid, WTSClientName, L"WTSClientName"); WTSGetString(serverHandle, sessionid, WTSClientDirectory, L"WTSClientDirectory"); WTSGetString(serverHandle, sessionid, WTSClientProductId, L"WTSClientProductId"); WTSGetString(serverHandle, sessionid, WTSClientHardwareId, L"WTSClientHardwareId"); WTSGetString(serverHandle, sessionid, WTSClientAddress, L"WTSClientAddress"); WTSGetString(serverHandle, sessionid, WTSClientDisplay, L"WTSClientDisplay"); WTSGetString(serverHandle, sessionid, WTSClientProtocolType, L"WTSClientProtocolType"); } int _tmain(int argc, _TCHAR* argv[]) { PWTS_SESSION_INFOW ppSessionInfo = 0; DWORD pCount; if(!WTSEnumerateSessions(WTS_CURRENT_SERVER_HANDLE, 0, 1, &ppSessionInfo, &pCount)) { printLastError(L"WTSEnumerateSessions", GetLastError()); return 1; } wprintf(L"%d WTS sessions found on host\n", pCount); for (unsigned int i=0; i<pCount; i++) { wprintf(L"> session=%d, stationName = %s\n", ppSessionInfo[i].SessionId, ppSessionInfo[i].pWinStationName); ExtractFromWTS(WTS_CURRENT_SERVER_HANDLE, ppSessionInfo[i].SessionId); LPWSTR sessionstr = new wchar_t[200]; wsprintf(sessionstr, L"%d", ppSessionInfo[i].SessionId); } return 0; } And here's the output: C:\Users\Administrator\Desktop>ObtainWTSStartShell.exe empserver1 4 WTS sessions found on host > session=0, stationName = Services WTSQuerySessionInformationW - session 0 - WTSInitialProgram failed - error=87 - The paramete r is incorrect. WTSQuerySessionInformationW - session 0 - WTSApplicationName failed - error=87 - The paramet er is incorrect. WTSQuerySessionInformationW - session 0 - WTSWorkingDirectory returned "" WTSQuerySessionInformationW - session 0 - WTSOEMId returned "" WTSQuerySessionInformationW - session 0 - WTSSessionId returned "" WTSQuerySessionInformationW - session 0 - WTSUserName returned "" WTSQuerySessionInformationW - session 0 - WTSWinStationName returned "Services" WTSQuerySessionInformationW - session 0 - WTSDomainName returned "" WTSQuerySessionInformationW - session 0 - WTSConnectState returned "?" WTSQuerySessionInformationW - session 0 - WTSClientBuildNumber returned "" WTSQuerySessionInformationW - session 0 - WTSClientName returned "" WTSQuerySessionInformationW - session 0 - WTSClientDirectory returned "" WTSQuerySessionInformationW - session 0 - WTSClientProductId returned "" WTSQuerySessionInformationW - session 0 - WTSClientHardwareId returned "" WTSQuerySessionInformationW - session 0 - WTSClientAddress returned "" WTSQuerySessionInformationW - session 0 - WTSClientDisplay returned "" WTSQuerySessionInformationW - session 0 - WTSClientProtocolType returned "" GetShellProcessNameFromUserPolicy - Error: Unable to open policy key - returned [2] GetShellProcessName succeseded - explorer.exe > session=1, stationName = Console WTSQuerySessionInformationW - session 1 - WTSInitialProgram returned "" WTSQuerySessionInformationW - session 1 - WTSApplicationName returned "" WTSQuerySessionInformationW - session 1 - WTSWorkingDirectory returned "" WTSQuerySessionInformationW - session 1 - WTSOEMId returned "" WTSQuerySessionInformationW - session 1 - WTSSessionId returned "?" WTSQuerySessionInformationW - session 1 - WTSUserName returned "" WTSQuerySessionInformationW - session 1 - WTSWinStationName returned "Console" WTSQuerySessionInformationW - session 1 - WTSDomainName returned "" WTSQuerySessionInformationW - session 1 - WTSConnectState returned "?" WTSQuerySessionInformationW - session 1 - WTSClientBuildNumber returned "" WTSQuerySessionInformationW - session 1 - WTSClientName returned "" WTSQuerySessionInformationW - session 1 - WTSClientDirectory returned "" WTSQuerySessionInformationW - session 1 - WTSClientProductId returned "" WTSQuerySessionInformationW - session 1 - WTSClientHardwareId returned "" WTSQuerySessionInformationW - session 1 - WTSClientAddress returned "" WTSQuerySessionInformationW - session 1 - WTSClientDisplay returned "?" WTSQuerySessionInformationW - session 1 - WTSClientProtocolType returned "" GetShellProcessNameFromUserPolicy - Error: Unable to open policy key - returned [2] GetShellProcessName succeseded - explorer.exe > session=3, stationName = RDP-Tcp#0 WTSQuerySessionInformationW - session 3 - WTSInitialProgram returned "" WTSQuerySessionInformationW - session 3 - WTSApplicationName returned "" WTSQuerySessionInformationW - session 3 - WTSWorkingDirectory returned "" WTSQuerySessionInformationW - session 3 - WTSOEMId returned "" WTSQuerySessionInformationW - session 3 - WTSSessionId returned "?" WTSQuerySessionInformationW - session 3 - WTSUserName returned "Administrator" WTSQuerySessionInformationW - session 3 - WTSWinStationName returned "RDP-Tcp#0" WTSQuerySessionInformationW - session 3 - WTSDomainName returned "EMPSERVER1" WTSQuerySessionInformationW - session 3 - WTSConnectState returned "" WTSQuerySessionInformationW - session 3 - WTSClientBuildNumber returned "?" WTSQuerySessionInformationW - session 3 - WTSClientName returned "APWADEV03" WTSQuerySessionInformationW - session 3 - WTSClientDirectory returned "C:\Windows\System32\m stscax.dll" WTSQuerySessionInformationW - session 3 - WTSClientProductId returned "?" WTSQuerySessionInformationW - session 3 - WTSClientHardwareId returned "" WTSQuerySessionInformationW - session 3 - WTSClientAddress returned "?" WTSQuerySessionInformationW - session 3 - WTSClientDisplay returned "?" WTSQuerySessionInformationW - session 3 - WTSClientProtocolType returned "?" GetShellProcessNameFromUserPolicy - Error: Unable to open policy key - returned [2] GetShellProcessName succeseded - explorer.exe > session=65536, stationName = RDP-Tcp WTSQuerySessionInformationW - session 65536 - WTSInitialProgram returned "" WTSQuerySessionInformationW - session 65536 - WTSApplicationName returned "" WTSQuerySessionInformationW - session 65536 - WTSWorkingDirectory returned "" WTSQuerySessionInformationW - session 65536 - WTSOEMId returned "" WTSQuerySessionInformationW - session 65536 - WTSSessionId returned "" WTSQuerySessionInformationW - session 65536 - WTSUserName returned "" WTSQuerySessionInformationW - session 65536 - WTSWinStationName returned "RDP-Tcp" WTSQuerySessionInformationW - session 65536 - WTSDomainName returned "" WTSQuerySessionInformationW - session 65536 - WTSConnectState returned "?" WTSQuerySessionInformationW - session 65536 - WTSClientBuildNumber returned "" WTSQuerySessionInformationW - session 65536 - WTSClientName returned "" WTSQuerySessionInformationW - session 65536 - WTSClientDirectory returned "" WTSQuerySessionInformationW - session 65536 - WTSClientProductId returned "" WTSQuerySessionInformationW - session 65536 - WTSClientHardwareId returned "" WTSQuerySessionInformationW - session 65536 - WTSClientAddress returned "" WTSQuerySessionInformationW - session 65536 - WTSClientDisplay returned "" WTSQuerySessionInformationW - session 65536 - WTSClientProtocolType returned "" GetShellProcessNameFromUserPolicy - Error: Unable to open policy key - returned [2] GetShellProcessName succeseded - explorer.exe As you can see, some of the data looks valid, but not all....

Read the article

Cannot Start Nginx Compiled from Source

- by Jason Alan Kennedy

I am trying to compile Nginx from source based on the original compiled Nginx server running on my DigitalOcean server ( Ubuntu-14.04 64x ) but with a few extra modules. I can get everything installed smoothly but I can not get it to start. I am sure the ini is correct because I copied the original source off the current running Nginx server [ Even though I see that Nginx now adds the ini when compiling fron source ]. Below is the [ lengthy process ] that I am performing - add sorry but I wanted to be thorough for those who are in need of the info ]. Because I am a newB to Nginx, I am sure I am missing something or just have it all wrong. If you may look over what I have done and see if you spot anything I need/need to change, I will greatly appreciate it. Thnx! With the original Nginx server still running: I check the current/running Nginx configuration so I can build the new Nginx instance the same but with the added modules: nginx -V # The out-put: configure arguments: --with-cc-opt='-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' --with-ld-opt='-Wl,-Bsymbolic-functions -Wl,-z,relro' --prefix=/usr/share/nginx --conf-path=/etc/nginx/nginx.conf --http-log-path=/var/log/nginx/access.log --error-log-path=/var/log/nginx/error.log --lock-path=/var/lock/nginx.lock --pid-path=/run/nginx.pid --http-client-body-temp-path=/var/lib/nginx/body --http-fastcgi-temp-path=/var/lib/nginx/fastcgi --http-proxy-temp-path=/var/lib/nginx/proxy --http-scgi-temp-path=/var/lib/nginx/scgi --http-uwsgi-temp-path=/var/lib/nginx/uwsgi --with-debug --with-pcre-jit --with-ipv6 --with-http_ssl_module --with-http_stub_status_module --with-http_realip_module --with-http_addition_module --with-http_dav_module --with-http_geoip_module --with-http_gzip_static_module --with-http_image_filter_module --with-http_spdy_module --with-http_sub_module --with-http_xslt_module NOTE: The configure arguments below return errors during 'make' so I removed them. I don't know what they are - could this be related to my issue??? --with-cc-opt='-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2' --with-ld-opt='-Wl,-Bsymbolic-functions -Wl,-z,relro' Moving on: # So I don't have to sudo every line: sudo bash # Check for updates first thing: apt-get update # Install various prerequisites needed to compile Nginx: apt-get install build-essential libgd2-xpm-dev lsb-base zlib1g-dev libpcre3 libpcre3-dev libbz2-dev libxslt1-dev libxml2 libssl-dev libgeoip-dev tar unzip openssl # Create System users [ if it doesn't exist - but I see its there on DigitalOceans' Droplets all-ready ]: adduser --system --no-create-home --disabled-login --disabled-password --group www-data # Download NGINX wget http://nginx.org/download/nginx-1.7.4.tar.gz tar -xvzf nginx-1.7.4.tar.gz # Then Google PageSpeed: wget https://github.com/pagespeed/ngx_pagespeed/archive/release-1.8.31.4-beta.zip unzip release-1.8.31.4-beta.zip # cd into the PageSpeed Directory cd ngx_pagespeed-release-1.8.31.4-beta/ # and add the PSOL files in there: wget https://dl.google.com/dl/page-speed/psol/1.8.31.4.tar.gz tar -xzvf 1.8.31.4.tar.gz # Get back to the root directory: cd # I add the ngx_cache_purge module and will install the Nginx Helper plugin for WP later: wget https://github.com/FRiCKLE/ngx_cache_purge/archive/2.1.zip unzip 2.1.zip # Add the headers-more-nginx-module: wget https://github.com/openresty/headers-more-nginx-module/archive/v0.25.zip unzip v0.25.zip # and the naxsi module for added security: wget https://github.com/nbs-system/naxsi/archive/0.53-2.tar.gz tar -xvzf 0.53-2.tar.gz # cd to the new Nginx directory cd nginx-1.7.4 # Set up the configuration build based on the current running Nginx config args and add my additional modules: ./configure \ --add-module=$HOME/naxsi-0.53-2/naxsi_src \ --prefix=/usr/share/nginx \ --conf-path=/etc/nginx/nginx.conf \ --http-log-path=/var/log/nginx/access.log \ --error-log-path=/var/log/nginx/error.log \ --lock-path=/var/lock/nginx.lock \ --pid-path=/run/nginx.pid \ --http-client-body-temp-path=/var/lib/nginx/body \ --http-fastcgi-temp-path=/var/lib/nginx/fastcgi \ --http-proxy-temp-path=/var/lib/nginx/proxy \ --http-scgi-temp-path=/var/lib/nginx/scgi \ --http-uwsgi-temp-path=/var/lib/nginx/uwsgi \ --user=www-data \ --group=www-data \ --with-debug \ --with-pcre-jit \ --with-ipv6 \ --with-http_ssl_module \ --with-http_stub_status_module \ --with-http_realip_module \ --with-http_addition_module \ --with-http_dav_module \ --with-http_geoip_module \ --with-http_gzip_static_module \ --with-http_image_filter_module \ --with-http_spdy_module \ --with-http_sub_module \ --with-http_xslt_module \ --with-mail \ --with-mail_ssl_module \ --add-module=$HOME/ngx_pagespeed-release-1.8.31.4-beta \ --add-module=$HOME/ngx_cache_purge-2.1 \ --add-module=$HOME/headers-more-nginx-module-0.25 [ENTER] Configuration Summary: Configuration summary + using system PCRE library + using system OpenSSL library + md5: using OpenSSL library + sha1: using OpenSSL library + using system zlib library nginx path prefix: "/usr/share/nginx" nginx binary file: "/usr/share/nginx/sbin/nginx" nginx configuration prefix: "/etc/nginx" nginx configuration file: "/etc/nginx/nginx.conf" nginx pid file: "/run/nginx.pid" nginx error log file: "/var/log/nginx/error.log" nginx http access log file: "/var/log/nginx/access.log" nginx http client request body temporary files: "/var/lib/nginx/body" nginx http proxy temporary files: "/var/lib/nginx/proxy" nginx http fastcgi temporary files: "/var/lib/nginx/fastcgi" nginx http uwsgi temporary files: "/var/lib/nginx/uwsgi" nginx http scgi temporary files: "/var/lib/nginx/scgi" Next step: I cd to root and I check the old Nginx folder locations and double checked the 'make' output to see that they are the same: whereis nginx #Output: nginx: /usr/sbin/nginx /etc/nginx /usr/share/nginx NOTE: Not sure about the '/usr/sbin/nginx' - Possible issue??? Next I copy the old /etc/nginx/nginx.conf, /etc/nginx/sites-available/default, /etc/nginx/sites-enabled/default, /etc/init.d/nginx to a text file locally for safe keeping to use in the new Nginx server. Then stop the running Nginx server: service nginx stop , verify it's stopped: service --status-all and the output is: [ - ] nginx To verify that there are two Nginx directories, I cd to: cd nginx* and the output is an error indicating there are two nginx folders - Cool Beans! :) Now Install the new Nginx server: cd nginx-1.7.4 make install # INSTALL OUTPUT ######################################## make -f objs/Makefile install make[1]: Entering directory `/home/walkingfish/nginx-1.7.4' test -d '/usr/share/nginx' || mkdir -p '/usr/share/nginx' test -d '/usr/share/nginx/sbin' || mkdir -p '/usr/share/nginx/sbin' test ! -f '/usr/share/nginx/sbin/nginx' || mv '/usr/share/nginx/sbin/nginx' '/usr/share/nginx/sbin/nginx.old' cp objs/nginx '/usr/share/nginx/sbin/nginx' test -d '/etc/nginx' || mkdir -p '/etc/nginx' cp conf/koi-win '/etc/nginx' cp conf/koi-utf '/etc/nginx' cp conf/win-utf '/etc/nginx' test -f '/etc/nginx/mime.types' || cp conf/mime.types '/etc/nginx' cp conf/mime.types '/etc/nginx/mime.types.default' test -f '/etc/nginx/fastcgi_params' || cp conf/fastcgi_params '/etc/nginx' cp conf/fastcgi_params '/etc/nginx/fastcgi_params.default' test -f '/etc/nginx/fastcgi.conf' || cp conf/fastcgi.conf '/etc/nginx' cp conf/fastcgi.conf '/etc/nginx/fastcgi.conf.default' test -f '/etc/nginx/uwsgi_params' || cp conf/uwsgi_params '/etc/nginx' cp conf/uwsgi_params '/etc/nginx/uwsgi_params.default' test -f '/etc/nginx/scgi_params' || cp conf/scgi_params '/etc/nginx' cp conf/scgi_params '/etc/nginx/scgi_params.default' test -f '/etc/nginx/nginx.conf' || cp conf/nginx.conf '/etc/nginx/nginx.conf' cp conf/nginx.conf '/etc/nginx/nginx.conf.default' test -d '/run' || mkdir -p '/run' test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' test -d '/usr/share/nginx/html' || cp -R html '/usr/share/nginx' test -d '/var/log/nginx' || mkdir -p '/var/log/nginx' ######################################################### I copy/create the files that I saved earlier to txt files in sites-available, the config, default and ini files then symlink them to sites-enabled, and so on. And now to start the server: service nginx start And this is where s#!+ hits the fan - Nada. I check to see if Nginx is running with service --status-all and its not. Also with nginx -V and its not installed??? I reboot the system too and still nothing. So I am not sure what is wrong here. The ini was copied over from the old server along with all the other config files after deleting the old files. When I opened the new compiled files, the nginx default data was present so I replaced them with my old original data prior to starting the new server for the first time. Also to be safe, I rm /etc/nginx/sites-enabled/default and symlinked with ln -s /etc/nginx/sites-available/default /etc/nginx/sites-enabled/default with no errors and I verified that the data was in the sites-enabled/default file. I don't think the server really/fully installed because of the nginx -V result: The program 'nginx' can be found in the following packages: * nginx-core * nginx-extras * nginx-full * nginx-light * nginx-naxsi Try: apt-get install <selected package> Do/should I apt-get install nginx-1.7.4 ?? Or what package do I use being that its a custom package and make install earlier did nothing?? If you need to see the conf files I copied over from the old to the custom server, LMK and I'll post them. Again your help here would be appreciated!

Read the article

socket connection failed, telnet OK

- by cf16

my problem is that I can't connect two comps through socket (windows xp and windows7) although the server created with socket is listening and I can telnet it. It receives then information and does what should be done, but if I run the corresponding socket client I get error 10061. Moreover I am behind firewall - these two comps are running within my LAN, the windows firewalls are turned off, comp1: 192.168.1.2 port 12345 comp1: 192.168.1.6 port 12345 router: 192.168.1.1 Maybe port forwarding could help? But most important for me is to answer why Sockets fail if telnet works fine. client: int main(){ // Initialize Winsock. WSADATA wsaData; int iResult = WSAStartup(MAKEWORD(2,2), &wsaData); if (iResult != NO_ERROR) printf("Client: Error at WSAStartup().\n"); else printf("Client: WSAStartup() is OK.\n"); // Create a socket. SOCKET m_socket; m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); if (m_socket == INVALID_SOCKET){ printf("Client: socket() - Error at socket(): %ld\n", WSAGetLastError()); WSACleanup(); return 7; }else printf("Client: socket() is OK.\n"); // Connect to a server. sockaddr_in clientService; clientService.sin_family = AF_INET; //clientService.sin_addr.s_addr = inet_addr("77.64.240.156"); clientService.sin_addr.s_addr = inet_addr("192.168.1.5"); //clientService.sin_addr.s_addr = inet_addr("87.207.222.5"); clientService.sin_port = htons(12345); if (connect(m_socket, (SOCKADDR*)&clientService, sizeof(clientService)) == SOCKET_ERROR){ printf("Client: connect() - Failed to connect.\n"); wprintf(L"connect function failed with error: %ld\n", WSAGetLastError()); iResult = closesocket(m_socket); if (iResult == SOCKET_ERROR) wprintf(L"closesocket function failed with error: %ld\n", WSAGetLastError()); WSACleanup(); return 6; } // Send and receive data int bytesSent; int bytesRecv = SOCKET_ERROR; // Be careful with the array bound, provide some checking mechanism char sendbuf[200] = "Client: Sending some test string to server..."; char recvbuf[200] = ""; bytesSent = send(m_socket, sendbuf, strlen(sendbuf), 0); printf("Client: send() - Bytes Sent: %ld\n", bytesSent); while(bytesRecv == SOCKET_ERROR){ bytesRecv = recv(m_socket, recvbuf, 32, 0); if (bytesRecv == 0 || bytesRecv == WSAECONNRESET){ printf("Client: Connection Closed.\n"); break; }else printf("Client: recv() is OK.\n"); if (bytesRecv < 0) return 0; else printf("Client: Bytes received - %ld.\n", bytesRecv); } system("pause"); return 0; } server: int main(){ WORD wVersionRequested; WSADATA wsaData={0}; int wsaerr; // Using MAKEWORD macro, Winsock version request 2.2 wVersionRequested = MAKEWORD(2, 2); wsaerr = WSAStartup(wVersionRequested, &wsaData); if (wsaerr != 0){ /* Tell the user that we could not find a usable WinSock DLL.*/ printf("Server: The Winsock dll not found!\n"); return 0; }else{ printf("Server: The Winsock dll found!\n"); printf("Server: The status: %s.\n", wsaData.szSystemStatus); } /* Confirm that the WinSock DLL supports 2.2.*/ /* Note that if the DLL supports versions greater */ /* than 2.2 in addition to 2.2, it will still return */ /* 2.2 in wVersion since that is the version we */ /* requested. */ if (LOBYTE(wsaData.wVersion) != 2 || HIBYTE(wsaData.wVersion) != 2 ){ /* Tell the user that we could not find a usable WinSock DLL.*/ printf("Server: The dll do not support the Winsock version %u.%u!\n", LOBYTE(wsaData.wVersion), HIBYTE(wsaData.wVersion)); WSACleanup(); return 0; }else{ printf("Server: The dll supports the Winsock version %u.%u!\n", LOBYTE(wsaData.wVersion), HIBYTE(wsaData.wVersion)); printf("Server: The highest version this dll can support: %u.%u\n", LOBYTE(wsaData.wHighVersion), HIBYTE(wsaData.wHighVersion)); } //////////Create a socket//////////////////////// //Create a SOCKET object called m_socket. SOCKET m_socket; // Call the socket function and return its value to the m_socket variable. // For this application, use the Internet address family, streaming sockets, and the TCP/IP protocol. // using AF_INET family, TCP socket type and protocol of the AF_INET - IPv4 m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); // Check for errors to ensure that the socket is a valid socket. if (m_socket == INVALID_SOCKET){ printf("Server: Error at socket(): %ld\n", WSAGetLastError()); WSACleanup(); //return 0; }else{ printf("Server: socket() is OK!\n"); } ////////////////bind////////////////////////////// // Create a sockaddr_in object and set its values. sockaddr_in service; // AF_INET is the Internet address family. service.sin_family = AF_INET; // "127.0.0.1" is the local IP address to which the socket will be bound. service.sin_addr.s_addr = htons(INADDR_ANY);//inet_addr("127.0.0.1");//htons(INADDR_ANY); //inet_addr("192.168.1.2"); // 55555 is the port number to which the socket will be bound. // using the htons for big-endian service.sin_port = htons(12345); // Call the bind function, passing the created socket and the sockaddr_in structure as parameters. // Check for general errors. if (bind(m_socket, (SOCKADDR*)&service, sizeof(service)) == SOCKET_ERROR){ printf("Server: bind() failed: %ld.\n", WSAGetLastError()); closesocket(m_socket); //return 0; }else{ printf("Server: bind() is OK!\n"); } // Call the listen function, passing the created socket and the maximum number of allowed // connections to accept as parameters. Check for general errors. if (listen(m_socket, 1) == SOCKET_ERROR) printf("Server: listen(): Error listening on socket %ld.\n", WSAGetLastError()); else{ printf("Server: listen() is OK, I'm waiting for connections...\n"); } // Create a temporary SOCKET object called AcceptSocket for accepting connections. SOCKET AcceptSocket; // Create a continuous loop that checks for connections requests. If a connection // request occurs, call the accept function to handle the request. printf("Server: Waiting for a client to connect...\n"); printf("***Hint: Server is ready...run your client program...***\n"); // Do some verification... while (1){ AcceptSocket = SOCKET_ERROR; while (AcceptSocket == SOCKET_ERROR){ AcceptSocket = accept(m_socket, NULL, NULL); } // else, accept the connection... note: now it is wrong implementation !!!!!!!! !! !! (only 1 char) // When the client connection has been accepted, transfer control from the // temporary socket to the original socket and stop checking for new connections. printf("Server: Client Connected! Mammamija. \n"); m_socket = AcceptSocket; char recvBuf[200]=""; char * rc=recvBuf; int bytesRecv=recv(m_socket,recvBuf,64,0); if(bytesRecv==0 || bytesRecv==WSAECONNRESET){ cout<<"server: connection closed.\n"; }else{ cout<<"server: recv() is OK.\n"; if(bytesRecv<0){ return 0; }else{ printf("server: bytes received: %ld.\n",recvBuf); } }

Read the article

MySQL died during the night on a 12.04.1 Ubuntu

- by Olivier

I can't explain why, but somehow during the night, one of my MySQL running on an Ubuntu 12.04.1 box broke. The service is running but I can't login anymore (to SQL), the previous password is not working anymore. It does not looks like the server has been compromised (nothing in /var/auth.log) It looks like some automatic security upgrade (server is configured to perform those) has occured and broke something. The MySQL server has restarted a couple of times in the logs at the time errors started to happen (I get email when CRON task fail). In the logs it complains about an unset root password (I do have cron job running all day using SQL so the password was set & working for months). Anyway I can't login without password either! Do you have any idea of what could have happened? How do I get my databases back? This line looks strange : Nov 6 06:36:12 ns398758 mysqld_safe[6676]: ERROR: 1064 You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'ALTER TABLE user ADD column Show_view_priv enum('N','Y') CHARACTER SET utf8 NOT ' at line 1 Here is the full log below : Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER ! Nov 6 06:36:06 ns398758 mysqld_safe[6586]: To do so, start the server, then issue the following commands: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: /usr/bin/mysqladmin -u root password 'new-password' Nov 6 06:36:06 ns398758 mysqld_safe[6586]: /usr/bin/mysqladmin -u root -h ns398758.ovh.net password 'new-password' Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Alternatively you can run: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: /usr/bin/mysql_secure_installation Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: which will also give you the option of removing the test Nov 6 06:36:06 ns398758 mysqld_safe[6586]: databases and anonymous user created by default. This is Nov 6 06:36:06 ns398758 mysqld_safe[6586]: strongly recommended for production servers. Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: See the manual for more instructions. Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Please report any problems with the /usr/scripts/mysqlbug script! Nov 6 06:36:06 ns398758 mysqld_safe[6586]: Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 [Note] Plugin 'FEDERATED' is disabled. Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 InnoDB: The InnoDB memory heap is disabled Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 InnoDB: Mutexes and rw_locks use GCC atomic builtins Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 InnoDB: Compressed tables use zlib 1.2.3.4 Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 InnoDB: Initializing buffer pool, size = 128.0M Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 InnoDB: Completed initialization of buffer pool Nov 6 06:36:06 ns398758 mysqld_safe[6632]: 121106 6:36:06 InnoDB: highest supported file format is Barracuda. Nov 6 06:36:07 ns398758 mysqld_safe[6632]: 121106 6:36:07 InnoDB: Waiting for the background threads to start Nov 6 06:36:08 ns398758 mysqld_safe[6632]: 121106 6:36:08 InnoDB: 1.1.8 started; log sequence number 29276459701 Nov 6 06:36:08 ns398758 mysqld_safe[6632]: 121106 6:36:08 InnoDB: Starting shutdown... Nov 6 06:36:09 ns398758 mysqld_safe[6632]: 121106 6:36:09 InnoDB: Shutdown completed; log sequence number 29276459701 Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 [Note] Plugin 'FEDERATED' is disabled. Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: The InnoDB memory heap is disabled Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: Mutexes and rw_locks use GCC atomic builtins Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: Compressed tables use zlib 1.2.3.4 Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: Initializing buffer pool, size = 128.0M Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: Completed initialization of buffer pool Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: highest supported file format is Barracuda. Nov 6 06:36:11 ns398758 mysqld_safe[6676]: 121106 6:36:11 InnoDB: Waiting for the background threads to start Nov 6 06:36:12 ns398758 mysqld_safe[6676]: 121106 6:36:12 InnoDB: 1.1.8 started; log sequence number 29276459701 Nov 6 06:36:12 ns398758 mysqld_safe[6676]: ERROR: 1064 You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'ALTER TABLE user ADD column Show_view_priv enum('N','Y') CHARACTER SET utf8 NOT ' at line 1 Nov 6 06:36:12 ns398758 mysqld_safe[6676]: 121106 6:36:12 [ERROR] Aborting Nov 6 06:36:12 ns398758 mysqld_safe[6676]: Nov 6 06:36:12 ns398758 mysqld_safe[6676]: 121106 6:36:12 InnoDB: Starting shutdown... Nov 6 06:36:13 ns398758 mysqld_safe[6676]: 121106 6:36:13 InnoDB: Shutdown completed; log sequence number 29276459701 Nov 6 06:36:13 ns398758 mysqld_safe[6676]: 121106 6:36:13 [Note] /usr/sbin/mysqld: Shutdown complete Nov 6 06:36:13 ns398758 mysqld_safe[6676]: Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 [Note] Plugin 'FEDERATED' is disabled. Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: The InnoDB memory heap is disabled Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: Mutexes and rw_locks use GCC atomic builtins Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: Compressed tables use zlib 1.2.3.4 Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: Initializing buffer pool, size = 128.0M Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: Completed initialization of buffer pool Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: highest supported file format is Barracuda. Nov 6 06:36:13 ns398758 mysqld_safe[6697]: 121106 6:36:13 InnoDB: Waiting for the background threads to start Nov 6 06:36:14 ns398758 mysqld_safe[6697]: 121106 6:36:14 InnoDB: 1.1.8 started; log sequence number 29276459701 Nov 6 06:36:14 ns398758 mysqld_safe[6697]: 121106 6:36:14 InnoDB: Starting shutdown... Nov 6 06:36:15 ns398758 mysqld_safe[6697]: 121106 6:36:15 InnoDB: Shutdown completed; log sequence number 29276459701 Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 [Note] Plugin 'FEDERATED' is disabled. Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: The InnoDB memory heap is disabled Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: Mutexes and rw_locks use GCC atomic builtins Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: Compressed tables use zlib 1.2.3.4 Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: Initializing buffer pool, size = 128.0M Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: Completed initialization of buffer pool Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: highest supported file format is Barracuda. Nov 6 06:36:15 ns398758 mysqld_safe[6718]: 121106 6:36:15 InnoDB: Waiting for the background threads to start Nov 6 06:36:16 ns398758 mysqld_safe[6718]: 121106 6:36:16 InnoDB: 1.1.8 started; log sequence number 29276459701 Nov 6 06:36:16 ns398758 mysqld_safe[6718]: ERROR: 1050 Table 'plugin' already exists Nov 6 06:36:16 ns398758 mysqld_safe[6718]: 121106 6:36:16 [ERROR] Aborting Nov 6 06:36:16 ns398758 mysqld_safe[6718]: Nov 6 06:36:16 ns398758 mysqld_safe[6718]: 121106 6:36:16 InnoDB: Starting shutdown... Nov 6 06:36:17 ns398758 mysqld_safe[6718]: 121106 6:36:17 InnoDB: Shutdown completed; log sequence number 29276459701 Nov 6 06:36:17 ns398758 mysqld_safe[6718]: 121106 6:36:17 [Note] /usr/sbin/mysqld: Shutdown complete Nov 6 06:36:17 ns398758 mysqld_safe[6718]: Nov 6 06:36:19 ns398758 /etc/mysql/debian-start[6816]: Upgrading MySQL tables if necessary. Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: /usr/bin/mysql_upgrade: the '--basedir' option is always ignored Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: Looking for 'mysql' as: /usr/bin/mysql Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: Looking for 'mysqlcheck' as: /usr/bin/mysqlcheck Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: Running 'mysqlcheck' with connection arguments: '--port=3306' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' '--host=localhost' '--socket=/var/run/mysqld/mysqld.sock' Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: col_digitas.acos OK Nov 6 06:36:20 ns398758 /etc/mysql/debian-start[6819]: col_digitas.aros OK ...

Read the article

SOLVED mwfeedparser integrating in my app gives EXC_BAD_ACCESS (code=1, address=0xa0040008)

- by Pranoy C

SOLVED- Got it! The problem was that since I am creating the DoParsingStuff *parseThisUrl object in the viewDidLoad method, it's scope was only within that method. So after the method finished, the object got deallocated. I changed it to an instance variable instead and now it works. It gives a different error but that it an entirely different issue. Issue was: I have been struggling with trying to integrate the mwfeedparser library in my app for parsing RSS and ATOM feeds. It throws a gives EXC_BAD_ACCESS error which I can't seem to troubleshoot. //My Class looks like - My interface looks like: #import <Foundation/Foundation.h> #import "MWFeedParser.h" #import "NSString+HTML.h" @protocol ParseCompleted <NSObject> -(void)parsedArray:(NSMutableArray *)parsedArray; @end @interface DoParsingStuff : NSObject<MWFeedParserDelegate> @property (nonatomic,strong) NSMutableArray *parsedItems; @property (nonatomic, strong) NSArray *itemsToDisplay; @property (nonatomic,strong) MWFeedParser *feedParser; @property (nonatomic,strong) NSURL *feedurl; @property (nonatomic,strong) id <ParseCompleted> delegate; -(id)initWithFeedURL:(NSURL *)url; @end //And Implementaion: #import "DoParsingStuff.h" @implementation DoParsingStuff @synthesize parsedItems = _parsedItems; @synthesize itemsToDisplay = _itemsToDisplay; @synthesize feedParser = _feedParser; @synthesize feedurl=_feedurl; @synthesize delegate = _delegate; -(id)initWithFeedURL:(NSURL *)url{ if(self = [super init]){ _feedurl=url; _feedParser = [[MWFeedParser alloc] initWithFeedURL:_feedurl]; _feedParser.delegate=self; _feedParser.feedParseType=ParseTypeFull; _feedParser.connectionType=ConnectionTypeAsynchronously; } return self; } -(void)doParsing{ BOOL y = [_feedParser parse]; } # pragma mark - # pragma mark MWFeedParserDelegate - (void)feedParserDidStart:(MWFeedParser *)parser { //Just tells what url is being parsed e.g. http://www.wired.com/reviews/feeds/latestProductsRss NSLog(@"Started Parsing: %@", parser.url); } - (void)feedParser:(MWFeedParser *)parser didParseFeedInfo:(MWFeedInfo *)info { //What is the Feed about e.g. "Product Reviews" NSLog(@"Parsed Feed Info: “%@”", info.title); //self.title = info.title; } - (void)feedParser:(MWFeedParser *)parser didParseFeedItem:(MWFeedItem *)item { //Prints current element's title e.g. “An Arthropod for Your iDevices” NSLog(@"Parsed Feed Item: “%@”", item.title); if (item) [_parsedItems addObject:item]; } - (void)feedParserDidFinish:(MWFeedParser *)parser {//This is where you can do your own stuff with the parsed items NSLog(@"Finished Parsing%@", (parser.stopped ? @" (Stopped)" : @"")); [_delegate parsedArray:_parsedItems]; //[self updateTableWithParsedItems]; } - (void)feedParser:(MWFeedParser *)parser didFailWithError:(NSError *)error { NSLog(@"Finished Parsing With Error: %@", error); if (_parsedItems.count == 0) { //self.title = @"Failed"; // Show failed message in title } else { // Failed but some items parsed, so show and inform of error UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Parsing Incomplete" message:@"There was an error during the parsing of this feed. Not all of the feed items could parsed." delegate:nil cancelButtonTitle:@"Dismiss" otherButtonTitles:nil]; [alert show]; } //[self updateTableWithParsedItems]; } @end //I am calling this from my main viewcontroller as such: #import "DoParsingStuff.h" @interface ViewController : UIViewController <ParseCompleted> .... //And I have the following methods in my implementation: DoParsingStuff *parseThisUrl = [[DoParsingStuff alloc] initWithFeedURL:[NSURL URLWithString:@"http://www.theverge.com/rss/index.xml"]]; parseThisUrl.delegate=self; [parseThisUrl doParsing]; I have the method defined here as- -(void)parsedArray:(NSMutableArray *)parsedArray{ NSLog(@"%@",parsedArray); } //I stepped through breakpoints- When I try to go through the breakpoints, I see that everything goes fine till the very last [parseThisUrl doParsing]; in my delegate class. After that it starts showing me memory registers where I get lost. I think it could be due to arc as I have disabled arc on the mwfeedparser files but am using arc in the above classes. If you need the entire project for this, let me know. I tried it with NSZombies enabled and got a bit more info out of it: -[DoParsingStuff respondsToSelector:]: message sent to deallocated instance 0x6a52480 I am not using release/autorelease/retain etc. in this class...but it is being used in the mwfeedparser library.

Read the article

Passing events in JMS

- by sam

I'm new in JMS. In my program, My Problem is that , I want to pass 4 events(classes) (callEvent, agentEvent, featureEvent, eventListenerExit) from the JMSQueue Program , who i m mention below. How can I do this? // (JmsSender.java) package com.apac.control.helper; import java.util.Calendar; import javax.jms.Queue; import javax.jms.QueueConnection; import javax.jms.QueueConnectionFactory; import javax.jms.QueueSender; import javax.jms.QueueSession; import javax.jms.Session; import javax.jms.TextMessage; import javax.naming.InitialContext; import com.apac.control.api.CallData; import com.apac.control.exception.CtiException; import library.cti.CtiEventDocument; import library.cti.impl.CtiEventDocumentImpl; public final class JmsSender { private QueueConnectionFactory factory; private Queue queue; private QueueConnection connection; private QueueSession session; private QueueSender sender; private String sessionId; private String deviceId; private String centerId; private String switchId; public JmsSender(String queueJndiName, String sessionId, String deviceId, String centerId, String switchId) throws CtiException { this.sessionId = sessionId; this.deviceId = deviceId; this.centerId = centerId; this.switchId = switchId; try { InitialContext ic = new InitialContext(); factory = (QueueConnectionFactory) ic.lookup("javax/jms/QueueConnectionFactory"); queue = (Queue) ic.lookup(queueJndiName); } catch (Exception e) { throw new CtiException("CTI. Error creating JmsSender.", e); } } public String getCenterId() { return centerId; } public String getDeviceId() { return deviceId; } public String getSwitchId() { return switchId; } public void connect() throws CtiException { try { connection = factory.createQueueConnection(); } catch (Exception e) { throw new CtiException("CTI000. Error connecting to cti queue."); } } public void close() throws CtiException { try { connection.close(); } catch (Exception e) { throw new CtiException("CTI000. Error closing queue."); } } public void send(String eventType, CallData call, long seqId) throws CtiException { // prepare the message CtiEventDocument ced = this.createBaseCtiDocument(); CtiEventDocument ce = ced.getCtiEvent(); ce.setSequenceId(seqId); ce.setCallId("" + call.getCallId()); ce.setUcid(call.getUCID()); ce.setEventType(eventType); ce.setDnisNumber(call.getDnisNumber()); ce.setAniNumber(call.getAniNumber()); ce.setApplicationData(call.getApplicationData()); ce.setQueueNumber(call.getQueueNumber()); ce.setCallingNumber(call.getCallingNumber()); if (call instanceof ManualCall) { ce.setManual("yes"); } try { sendMessage(ced.toString()); } catch (Exception e) { throw new CtiException("CTI051. Error sending message.", e); } } public void send(String eventType, String agentId, String agentMode, long seqId) throws CtiException { CtiEventDocument ced = this.createBaseCtiDocument(); CtiEventDocument ce = ced.getCtiEvent(); ce.setSequenceId(seqId); ce.setEventType(eventType); ce.setAgentId(agentId); ce.setAgentMode(agentMode); try { sendMessage(ced.toString()); } catch (Exception e) { throw new CtiException("CTI051. Error sending message.", e); } } public void sendError(String errCode, String errMsg) throws CtiException { CtiEventDocument ced = this.createBaseCtiDocument(); CtiEventDocument ce = ced.getCtiEvent(); ce.setEventType("Error"); ce.setErrorCode(errCode); ce.setErrorMessage(errMsg); try { sendMessage(ced.toString()); } catch (Exception e) { throw new CtiException("CTI051. Error sending message.", e); } } private CtiEventDocument createBaseCtiDocument() { CtiEventDocument ced = CtiEventDocument.Factory.newInstance(); CtiEventDocument ce = ced.addNewCtiEvent(); ce.setSessionId(sessionId); ce.setSwitchId(switchId); ce.setCenterId(centerId); ce.setDeviceId(deviceId); ce.setTime(Calendar.getInstance()); return ced; } // Synchronization protects session, which cannot be // accessed by more than one thread. We may more than // one thread here from Cti in some cases (for example // when customer is being transfered out and hangs the call // at the same time. synchronized void sendMessage(String msg) throws Exception { session = connection.createQueueSession(true, Session.AUTO_ACKNOWLEDGE); sender = session.createSender(queue); TextMessage txtMsg = session.createTextMessage(msg); sender.send(txtMsg); sender.close(); session.commit(); } }

Read the article

AD-Integrated DNS failure: "Access was Denied"

- by goldPseudo

I have a single Windows 2008 R2 server configured as a domain controller with Active Directory Domain Services and DNS Server. The DNS Server was recently uninstalled and reinstalled in an attempt to fix a (possibly unrelated) problem; the event log was previously flooded with errors (#4000, "The DNS Server was unable to open Active Directory...") which reinstalling did not fix. However, while before it was at least showing and resolving names from the local network (slowly), now it's showing nothing at all. (The original error started with a #4015 error "The DNS server has encountered a critical error from the Active Directory," followed by a long string of #4000 and a few #4004. This may have been caused when a new DNS name was recently added, but I can't be sure of the timing.) Attempting to manage the DNS through Administrative Tools > DNS brings up an error: The server SERVERNAME could not be contacted. The error was: Access was denied. Would you like to add it anyway? Selecting yes just puts a SERVERNAME item on the list, but with all the configuration options grayed out. I attempted editing my hosts file as per this post but to no avail. Running dcdiag, it does identify the home server properly, but fails right away testing connectivity with: Starting test: Connectivity The host blahblahblahyaddayaddayadda could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc. Got error while checking LDAP and RPC connectivity. Please check your firewall settings. ......................... SERVERNAME failed test Connectivity Adding the blahblahblahyaddayaddayadda address to hosts (pointing at 127.0.0.1), the connectivity test succeeded but it didn't seem to solve the fundamental problem (Access was denied) so I hashed it out again. Primary DNS server is properly pointing at 127.0.0.1 according to ipconfig /all. And the DNS server is forwarding requests to external addresses properly (if slowly), but the resolving of local network names is borked. The DNS database itself is small enough that I am (grudgingly) able to rebuild it if need be, but the DNS Server doesn't seem willing to let me work with (or around) it at all. (and yes before you ask there are no system backups available) Where do I go from here? As requested, my (slightly obfuscated) dcdiag output: Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = bulgogi * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Obfuscated\BULGOGI Starting test: Connectivity The host a-whole-lot-of-numbers._msdcs.obfuscated.address could not be resolved to an IP address. Check the DNS server, DHCP, server name, etc. Got error while checking LDAP and RPC connectivity. Please check your firewall settings. ......................... BULGOGI failed test Connectivity Doing primary tests Testing server: Obfuscated\BULGOGI Skipping all tests, because server BULGOGI is not responding to directory service requests. Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : obfuscated Starting test: CheckSDRefDom ......................... obfuscated passed test CheckSDRefDom Starting test: CrossRefValidation ......................... obfuscated passed test CrossRefValidation Running enterprise tests on : obfuscated.address Starting test: LocatorCheck ......................... obfuscated.address passed test LocatorCheck Starting test: Intersite ......................... obfuscated.address passed test Intersite And my hosts file (minus the hashed lines for brevity): 127.0.0.1 localhost ::1 localhost And, for the sake of completion, here's selected chunks of my netstat -a -n output: TCP 0.0.0.0:88 0.0.0.0:0 LISTENING TCP 0.0.0.0:135 0.0.0.0:0 LISTENING TCP 0.0.0.0:389 0.0.0.0:0 LISTENING TCP 0.0.0.0:445 0.0.0.0:0 LISTENING TCP 0.0.0.0:464 0.0.0.0:0 LISTENING TCP 0.0.0.0:593 0.0.0.0:0 LISTENING TCP 0.0.0.0:636 0.0.0.0:0 LISTENING TCP 0.0.0.0:3268 0.0.0.0:0 LISTENING TCP 0.0.0.0:3269 0.0.0.0:0 LISTENING TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING TCP 0.0.0.0:9389 0.0.0.0:0 LISTENING TCP 0.0.0.0:47001 0.0.0.0:0 LISTENING TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING TCP 0.0.0.0:49155 0.0.0.0:0 LISTENING TCP 0.0.0.0:49157 0.0.0.0:0 LISTENING TCP 0.0.0.0:49158 0.0.0.0:0 LISTENING TCP 0.0.0.0:49164 0.0.0.0:0 LISTENING TCP 0.0.0.0:49178 0.0.0.0:0 LISTENING TCP 0.0.0.0:49179 0.0.0.0:0 LISTENING TCP 0.0.0.0:50480 0.0.0.0:0 LISTENING TCP 127.0.0.1:53 0.0.0.0:0 LISTENING TCP 192.168.12.127:53 0.0.0.0:0 LISTENING TCP 192.168.12.127:139 0.0.0.0:0 LISTENING TCP 192.168.12.127:445 192.168.12.50:51118 ESTABLISHED TCP 192.168.12.127:3389 192.168.12.4:33579 ESTABLISHED TCP 192.168.12.127:3389 192.168.12.100:1115 ESTABLISHED TCP 192.168.12.127:50784 192.168.12.50:49174 ESTABLISHED <snip ipv6> UDP 0.0.0.0:123 *:* UDP 0.0.0.0:500 *:* UDP 0.0.0.0:1645 *:* UDP 0.0.0.0:1645 *:* UDP 0.0.0.0:1646 *:* UDP 0.0.0.0:1646 *:* UDP 0.0.0.0:1812 *:* UDP 0.0.0.0:1812 *:* UDP 0.0.0.0:1813 *:* UDP 0.0.0.0:1813 *:* UDP 0.0.0.0:4500 *:* UDP 0.0.0.0:5355 *:* UDP 0.0.0.0:59638 *:* <snip a few thousand lines> UDP 0.0.0.0:62140 *:* UDP 127.0.0.1:53 *:* UDP 127.0.0.1:49540 *:* UDP 127.0.0.1:49541 *:* UDP 127.0.0.1:53655 *:* UDP 127.0.0.1:54946 *:* UDP 127.0.0.1:58345 *:* UDP 127.0.0.1:63352 *:* UDP 127.0.0.1:63728 *:* UDP 127.0.0.1:63729 *:* UDP 127.0.0.1:64215 *:* UDP 127.0.0.1:64646 *:* UDP 192.168.12.127:53 *:* UDP 192.168.12.127:67 *:* UDP 192.168.12.127:68 *:* UDP 192.168.12.127:88 *:* UDP 192.168.12.127:137 *:* UDP 192.168.12.127:138 *:* UDP 192.168.12.127:389 *:* UDP 192.168.12.127:464 *:* UDP 192.168.12.127:2535 *:* <snip ipv6 again>

Read the article

Maven: Unresolved references to [org.osgi.service.http]

- by Simone Vellei

I'm trying to create a bundle using HttpService for register Servlet using maven-bundle-plugin. The pom.xml of the project is: <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>felix-tutorial</groupId> <artifactId>example-1</artifactId> <version>1.0</version> <packaging>bundle</packaging> <name>Apache Felix Tutorial Example 1</name> <description>Apache Felix Tutorial Example 1</description>  <build> <plugins> <plugin> <groupId>org.apache.felix</groupId> <artifactId>maven-bundle-plugin</artifactId> <extensions>true</extensions> <configuration> <instructions> <Bundle-SymbolicName>${pom.groupId}.${pom.artifactId}</Bundle-SymbolicName> <Bundle-Name>Service listener example</Bundle-Name> <Bundle-Description>A bundle that displays messages at startup and when service events occur</Bundle-Description> <Bundle-Vendor>Apache Felix</Bundle-Vendor> <Bundle-Version>1.0.0</Bundle-Version> <Bundle-Activator>tutorial.example1.Activator</Bundle-Activator> <Import-Package>org.osgi.framework;version="1.0.0", javax.servlet, javax.servlet.http</Import-Package> </instructions> </configuration> </plugin> </plugins> </build>  <dependencies> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.framework</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>junit</groupId> <artifactId>junit</artifactId> <version>4.8.1</version> <scope>test</scope> </dependency> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.http.api</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.http.base</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.http.bridge</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.http.bundle</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.http.proxy</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.apache.felix</groupId> <artifactId>org.apache.felix.http.whiteboard</artifactId> <version>2.0.4</version> </dependency> <dependency> <groupId>org.osgi</groupId> <artifactId>osgi_R4_compendium</artifactId> <version>1.0</version> </dependency> </dependencies> </project> "mvn install" command returns the following error: [INFO] Scanning for projects... [INFO] ------------------------------------------------------------------------ [INFO] Building Apache Felix Tutorial Example 1 [INFO] task-segment: [install] [INFO] ------------------------------------------------------------------------ Downloading: http://repo1.maven.org/maven2/org/apache/maven/plugins/maven-resources-plugin/2.3/maven-resources-plugin-2.3.pom Downloading: http://repo1.maven.org/maven2/org/apache/maven/plugins/maven-resources-plugin/2.3/maven-resources-plugin-2.3.jar Downloading: http://repo1.maven.org/maven2/org/apache/maven/plugins/maven-install-plugin/2.2/maven-install-plugin-2.2.pom Downloading: http://repo1.maven.org/maven2/org/apache/maven/plugins/maven-install-plugin/2.2/maven-install-plugin-2.2.jar Downloading: http://repo1.maven.org/maven2/org/apache/maven/shared/maven-filtering/1.0-beta-2/maven-filtering-1.0-beta-2.pom Downloading: http://repo1.maven.org/maven2/org/codehaus/plexus/plexus-interpolation/1.6/plexus-interpolation-1.6.pom Downloading: http://repo1.maven.org/maven2/org/codehaus/plexus/plexus-interpolation/1.6/plexus-interpolation-1.6.jar Downloading: http://repo1.maven.org/maven2/org/apache/maven/shared/maven-filtering/1.0-beta-2/maven-filtering-1.0-beta-2.jar [INFO] [resources:resources {execution: default-resources}] [WARNING] Using platform encoding (Cp1252 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] skip non existing resourceDirectory C:\eclipse\ws\stripes-bundle\src\main\resources [INFO] [compiler:compile {execution: default-compile}] [INFO] Nothing to compile - all classes are up to date [INFO] [resources:testResources {execution: default-testResources}] [WARNING] Using platform encoding (Cp1252 actually) to copy filtered resources, i.e. build is platform dependent! [INFO] skip non existing resourceDirectory C:\eclipse\ws\stripes-bundle\src\test\resources [INFO] [compiler:testCompile {execution: default-testCompile}] [INFO] Nothing to compile - all classes are up to date [INFO] [surefire:test {execution: default-test}] [INFO] Surefire report directory: C:\eclipse\ws\stripes-bundle\target\surefire-reports ------------------------------------------------------- T E S T S ------------------------------------------------------- Running com.beanopoly.stripes.AppTest Tests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.031 sec Results : Tests run: 1, Failures: 0, Errors: 0, Skipped: 0 [INFO] [bundle:bundle {execution: default-bundle}] [ERROR] Error building bundle felix-tutorial:example-1:bundle:1.0 : Unresolved references to [org.osgi.service.http] by class(es) on the Bundle-Classpath[Jar:do [ERROR] Error(s) found in bundle configuration [INFO] ------------------------------------------------------------------------ [ERROR] BUILD ERROR [INFO] ------------------------------------------------------------------------ [INFO] Error(s) found in bundle configuration [INFO] ------------------------------------------------------------------------ [INFO] For more information, run Maven with the -e switch [INFO] ------------------------------------------------------------------------ [INFO] Total time: 12 seconds [INFO] Finished at: Sat Mar 27 13:11:47 CET 2010 [INFO] Final Memory: 12M/21M [INFO] ------------------------------------------------------------------------

Search Results

Search found 62712 results on 2509 pages for 'memory error'.

Page 765/2509 | < Previous Page | 761 762 763 764 765 766 767 768 769 770 771 772 | Next Page >

- by Josamoto

- by ustulation

- by bbbscarter

- by morgancodes

- by SeniorLee

- by user350139

- by Foredecker

- by Piotr Czapla

- by Kennet Belenky

- by yae

- by pfdevil

- by Beachhouse

- by kyeana

- by MickMalone1983

- by Eric

- by Arlaharen

- by Adam Shiemke

- by Benj

- by Jason Alan Kennedy

- by cf16

- by Olivier

- by Pranoy C

- by sam

- by goldPseudo

- by Simone Vellei

< Previous Page | 761 762 763 764 765 766 767 768 769 770 771 772 | Next Page >