Search Results

Search found 23098 results on 924 pages for 'multiple processes'.

Page 767/924 | < Previous Page | 763 764 765 766 767 768 769 770 771 772 773 774  | Next Page >

• How do I load balance between two Linux machines?

  - by William Hilsum

  Inspired by the Stack Overflow network, I am now obsessed with HAProxy and trying to use it myself. At the moment, each HAProxy box has got two network cards (well, two configured, I can have a maximum of 4 and wasn't sure if they needed their own one for management between the boxes). On both machines, the backend one (eth1) is a private IP that goes to a switch connected to the webservers, and the front facing one (eth0) has a public internet IP that is routed straight though. In addition, I have created an additional virtual ip for eth0 called eth0:0 which has got a third public ip address. I just about get how to use it for load balancing between multiple web servers that are behind it, but, I am failing to load balance between the two HAProxy boxes - they appear to fight for the virtual IP, but, this does not appear to be a smart solution. Now, by using the virtual shared IP address, this solution appears to work and does seem to give me maximum uptime, but, is this the correct way to do it, or is there a smarter way? I have been looking at other Linux packages such as keepalived, but, I have only been using Linux (server) for a week now and am at the limits of my understanding. Is there anyone who has done this before and can you advise anything for maximum uptime?

  Read the article

• Why would VMWare to go defunct? How to recover from/prevent it?

  - by Josh

  I am running VMWare Server 2.0.2 (Build 203138) on a dual core Intel i5 with Ubuntu Server 10.04 LTS system (kernel 2.6.32-22-server #33-Ubuntu SMP). Disk Subsystem is a software RAID5 array. The system has been set up for a little over a week. For the past 5 days I have been running at leat 3 VMs (Linux and a variety of Windows OSes) with no issues whatsoever. But while I was installing Linux onto a new VM, suddenly all VMs became unresponsive, including the one I was installing to. I could not log in to the VMWare Management Interface, and the system was somewhat unresponsive via SSH. When I looked at top, I saw: top - 16:14:51 up 6 days, 1:49, 8 users, load average: 24.29, 24.33 17.54 Tasks: 203 total, 7 running, 195 sleeping, 0 stopped, 1 zombie Cpu(s): 0.2%us, 25.6%sy, 0.0%ni, 74.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8056656k total, 5927580k used, 2129076k free, 20320k buffers Swap: 7811064k total, 240216k used, 7570848k free, 5045884k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 21549 root 39 19 0 0 0 Z 100 0.0 15:02.44 [vmware-vmx] <defunct> 2115 root 20 0 0 0 0 S 1 0.0 170:32.08 [vmware-rtc] 2231 root 21 1 1494m 126m 100m S 1 1.6 892:58.05 /usr/lib/vmware/bin/vmware-vmx -# product=2; 2280 jnet 20 0 19320 1164 800 R 0 0.0 30:04.55 top 12236 root 20 0 833m 41m 34m S 0 0.5 88:34.24 /usr/lib/vmware/bin/vmware-vmx -# product=2; 1 root 20 0 23704 1476 920 S 0 0.0 0:00.80 /sbin/init 2 root 20 0 0 0 0 S 0 0.0 0:00.01 [kthreadd] 3 root RT 0 0 0 0 S 0 0.0 0:00.00 [migration/0] 4 root 20 0 0 0 0 S 0 0.0 0:00.84 [ksoftirqd/0] 5 root RT 0 0 0 0 S 0 0.0 0:00.00 [watchdog/0] 6 root RT 0 0 0 0 S 0 0.0 0:00.00 [migration/1] The VMWare process for the virtual machine I was installing into became a zombie. Yet, it was still consuming 100% of the CPU time on one of the cores, and I couldn't reach it or any other virtual machines. (I was logged in to one virtual machine over SSH, another via X11, and a third via VNC. All three connections died). When I ran ps -ef and similar commands, I found that the defunct vmware-vmx process had it's parent PID set to init (1). I also used lsof -p 21549 and found that the defunct process had no open files. Yet it was using 100% of CPU time... I was unable to kill any vmware-vmx processes, including the defunct one, even with kill -9. As a last resort to resolve the situation I tried to reboot the box, however shutdown, halt, reboot, and init 6 all failed to reboot/shutdown, even when given appropriate --force settings. ControlAltDel produced a message about rebooting on the console, but the system would not reboot. I had to hard power-cycle the box to resolve the situation. (See my other question, Should I worry about the integrity of my linux software RAID5 after a crash or kernel panic?) What would cause a scenario like this? What else could I have done to resolve it besides a hard reboot? What can I do to prevent such a situation in the future?

  Read the article

• How can I get VirtualBox to run at 1366x768?

  - by Joe White

  I'm trying to run Windows 8 in VirtualBox. My laptop's display is exactly 1366x768. Windows 8 disables some of its features if the resolution is less than 1366x768, so I need to run the guest OS fullscreen. The problem is, VirtualBox refuses to run the guest at 1366x768. When VirtualBox is "fullscreen", the guest is only 1360x768 -- six pixels too narrow. So there's a three-pixel black bar at the left and right sides of the display. This user had the same problem, but the accepted answer is "install the Guest Additions", which I've already done; that got me to 1360, but not to 1366. According to the VirtualBox ticket tracker, there used to be a bug where the guest's screen width would be rounded down to the nearest multiple of 8, but they claim to have fixed the bug in version 3.2.12. I'm using version 4.1.18 and seeing the same problem they claim to have fixed, so either they broke it again, they were wrong about ever having fixed it, or my problem is something else entirely. This answer suggested giving the VM 128MB of video memory, and claimed no problems getting 1366x768 afterward. When I created the VM, its display memory was already defaulted to 128 MB. I tried increasing it to 256MB, but with no effect: the guest is still six pixels too narrow. My host OS is Windows 7 64-bit, and I'm running VirtualBox 4.1.18. How can I get VirtualBox to run my guest OS fullscreen at my display's native resolution of 1366x768?

  Read the article

• Outlook won't re-connect to exchange after network is re-connected

  - by stan503

  I have a setup at my desk where I connect my computer to a an RJ45 switch that switches between two networks. One network is the corporate network, which is maintained by my company's IT, and the other is my own private network where I do testing (the two networks have to be separated). The corporate network hosts the exchange server where I get e-mail. When I switch from the private network to the corporate network, I expect Outlook to re-connect to the exchange server. However, I have found that sometimes when I come back, Outlook take an extremely long time to re-connect. Send/Receive will give me back the error 'The server is not available' (0x8004011D). It will sit there for 10 minutes to a few hours before it finally re-connects. The only other option is to reboot my computer, which is a huge pain for me since I run multiple VMs on it. This usually happens when I'm connected to the private network for a significant amount of time, so I'm thinking it's because Outlook has cached the network status. Is there a way to force Outlook to do a 'hard' re-connect to the exchange server? I'm using Windows XP SP 3 with Outlook 2007.

  Read the article

• Copy/paste filtered column in Excel - error message

  - by hazymat

  Firstly I should state that I don't believe in spreadsheets; my normal mode of operation is that data should either exist in a database or a text file... However - employment requires... In short, I have filtered a worksheet by column A, and I want to copy/paste from column B to column C. Obviously I don't wish to copy/paste values from rows that were filtered-out here. The above sounds ridiculously simple, right? First I tried simply copy/pasting on the filtered worksheet. This appeared to select and copy only the filtered data, however pasting appeared to insert values into hidden/filtered rows - as you might expect. So my initial research suggests I may wish to select the filtered data and press Alt+; (that is, ALT plus semicolon), which is a shortcut key for Goto Special Select Visible. Then just copy-paste. CTRL+C correctly copies the filtered data, however when I go to paste the values into another column, it pastes into hidden rows as well. Okay, so perhaps I should also "Select Visible" on the cells I wish to paste into as well? Nope - that gives me the error That command cannot be used on multiple selections. What am I doing wrong?!

  Read the article

• Windows 2012 RDS Temporary profile for Administrator

  - by Fabio

  I've configured a Windows 2012 RDS Farm with two virtual servers (VMWare - each one on a different ESX server). Both servers have Licensing, Web Access, Gateway, Connection Broker and Session Host roles. High Availability is set up and it works fine. Remote Apps are working and even Windows XP clients have access to the web interface. User profile path is \vmfiles1\UserProfileDisks\App\ and almost everyone has full right access to it. The problem I have is that I would like to be able to access both servers at the same time with the Administrator account (console), but each time I try, the second server that I logon to give me access with a temporary profile. I tried to enable/disable multiple sessions per user and forced Admin logoff with the GPO but nothing changed. Another thing is that the server pool is not saved, so each time I restart the RDS server or I logoff from it, I have to add a server in the server manager. Do you have any idea? Sorry if my english is not perfect.

  Read the article

• pfSense router on a LAN with two gateways

  - by JohnCC

  I have a LAN with an ADSL modem/router on it. We have just gained an alternative high-speed internet connection at our location, and I want to connect the LAN to it, eventually dropping the ADSL. I've chosen to use a small PFSense box to connect the LAN to the new WAN connection. Two servers on the LAN run services accessible to the outside via NAT using the single ADSL WAN IP. We have DNS records which point to this IP. I want to do the same via the new connection, using the WAN IP there. That connection permits multiple IPs, so I have configured pfSense using virtual IP's, 1:1 NAT and appropriate firewall rules. When I change the servers' default gateway settings to the pfSense box, I can access the services via the new WAN IPs without a problem. However, I can no longer access them via the old WAN IP. If I set the servers' default gateway back to the ADSL router, then the opposite is true - I can access the services via the ADSL IP, but not via the new one. In the first case, I believe this is because an incoming SYN packet arrives at the ADSL WAN IP, and is NAT'd and sent to the internal IP of the server. The server responds with a SYN/ACK which it sends via its default gateway, the pfSense box. The pfSense box sees a SYN/ACK that it saw no SYN for and drops the packet. Is there any sensible way around this? I would like the services to be accessible via both IPs for a short period at least, since once I change the DNS it will take a while before everyone picks up the new address.

  Read the article

• KVM error with device pass through

  - by javano

  I am running the following command booting a Debian live CD passing a host PCI device to the guest as a test and KVM errors out; kvm -m 512 -boot c -net none -hda /media/AA502592502565F3/debian.iso -device pci-assign,host=07:00.0 PCI region 1 at address 0xf7920000 has size 0x80, which is not a multiple of 4K. You might experience some performance hit due to that. No IOMMU found. Unable to assign device "(null)" kvm: -device pci-assign,host=07:00.0: Device 'pci-assign' could not be initialized lspci | grep 07 07:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) I shoved an old spare NIC into my motherboard to test PCI pass through. I have searched the Internet with Goolge and found that errors relating to "No IOMMU found" often mean the PCI device is not supported by KVM. Does KVM have to support the device being "passed-through"? I though the point was to pass the device through and let the guest worry about it? Ultimately I want to pass-through a PCI random number generator, is this not going to be possible with KVM? Thank you.

  Read the article

• How many reverse proxies (nginx, haproxy) is too many?

  - by Alysum

  I'm setting up a HA (high availability) cluster using nginx, haproxy & apache. I've been reading great things about nginx and haproxy. People tend to choose one or the other but I like both. Haproxy is more flexible for load balancing than nginx's simple round robin (even with the upstream-fair patch). But I'd like to keep nginx for redirecting non-https to https among other things right at the point of entry to the cluster. On the other hand, nginx is a lot faster for serving static contents and would reduce the load on the powerful apache which loves to eat a lot of RAM! Here is my planned setup: Load balancer: nginx listens on port 80/443 and proxy_forwards to haproxy on 8080 on the same server to load balance between the multiple nodes. Nodes: nginx on the node listens to requests coming from haproxy on 8080, if the content is static, serve it. But if it's a backend script (in my case PHP), proxy forward to apache2 on the same node server listenning on a different port number. Technically this setup works but my concerns are whether having the requests going through several proxies is going to slow down requests? Most of the requests will be PHP requests as the backends are services (which means groing from nginx - haproxy - nginx - apache). Thoughts? Cheers

  Read the article

• Want to use something like Citrix XenDesktop, Free Alternative?

  - by Chris

  I'm looking to go into IT, general office server management, and it looks like XenDesktop would be a awesome tool to use. If I get it right, you would store a central image of the OS you want to deploy (in an iso file) on the main server. Then use XenDesktop to pull that image down to the client, and it will then boot the OS inside of the virtual machine. Does it download the image of the OS and store it locally (like cloning the VM onto the client?) I'd love to find a free (possibly open source?) alternative to this, I keep on hearing about KVM in Linux and PXE booting a minimalistic OS to use remote KVMs.... Would that be what I'm looking for? Ideally, I'd like a system.. - That allows me to manage one central image for multiple clients (virtualized hardware) - Easily boot a thin client OS that connected to XenDesktop. Would those things be possible with some kind of free alternative? Some guidance would be greatly appreciated.

  Read the article

• Find out when a system went down?

  - by Clinton Blackmore

  I have a Mac OS X 10.5 server, with a RAID set in it, that went down due to a power outage on Thursday, and the machine is not happily booting right now*. It is possible to find out when the machine went down, while not booted off the internal drive? (I'm booted off an external drive, waiting for the RAID sets to initialize.) Normally, I'd run last. The man page doesn't indicate that I can run it against a different startup volume. It looks possible to parse /var/log/utmpx, but I don't think it'd be worthwhile to try to do that from scratch for this one-off problem. * I'm still trying to figure out why it isn't happy, and may ask a follow-up question. Right now I can see that UserNotificationCenter crashed repeatedly early Thursday morning, and that securityd, mdworker, and ARDAgent crash shortly after startup [I think -- I want to verify when the box went up and down]. The login window does not come up right (I think it is crashing or not able to cope with a dead securityd). The box is supposed to be set to go down when the UPS tells it power is out; at the moment, I'm wondering if it went down, and turned back on multiple times! I sure hope not.

  Read the article

• Errors with Using Webcam

  - by C.G.

  I have been having some issues accessing a webcam from my machine. Sometimes (not always) when I run a program that accesses the device (cheese, guvcview, and code using openCV), I get either of two messages, which lead to the program crashing. The first occurs after running the webcam for some time. libv4l2: error dequeuing buf: No such device VIDIOC_DQBUF: No such device The other will occur without even letting me have a chance to run the webcam. libv4l2: error turning on stream: No space left on device VIDIOC_STREAMON - Unable to start capture: No space left on device Occasionally after getting these errors I will also receive a message saying that no such device can be found for subsequent runs. Other than the times that the "No device found" message appears the webcam appears when I use lsusb. My machine runs Linux Fedora 16, and the webcam is a Logitech C920. I do have ffmpeg installed, and I have been able to run the web camera many times in the past without errors. What is particularly puzzling about these errors is that they just sprung up this past weekend. No new software or hardware has been installed on this machine recently; I haven't changed any settings recently either. It could possibly be a driver issue, but I don't know what could have changed which could lead to this issue. Any attempts at researching this problem has been fruitless as this seems to most commonly occur with multiple webcams. I am only working with one device. I'd appreciate any advice for this problem, as this has become a bit frustrating.

  Read the article

• Share Exchange Calendar Outside Organization

  - by CalCurious

  I'm trying to figure out the best way to meet a user's (Corp-A-User) request to share their calendar with someone at another company (Corp-B-User). We're running Microsoft SBS 2008 with Exchange 2007 and SharePoint. The remote user is running Exchange, version unknown. Corp-A-User wants to give the Corp-B-User the ability to create appointments on Corp-A-User's calendar. This will naturally require sharing of Free/Busy information. Corp-A-User naturally lacks the vision to seen ANY problem with giving Corp-B-User full access to their calendar. But, I see the problems with that and would prefer that Corp-B-User have only the ability to see Free/Busy and create appointments. Most of the external publishing options that I have thought of, such as WebDav, allow displaying a user's calendar, but there are problems with security and the ability to create appointments. Right now, I'm thinking the cleanest solution would be to use a Google calendar along with Google Calendar Sync for the two user's Outlook clients. But, I'm not sure if there isn't a better way and I hate teh idea of pushing a corporate calendar up to Google. Not to mention the issues likely to pop up from the multiple sync paths. Does any one have a good solution for this scenario that would be willing to share what they use?

  Read the article

• Bandwidth Suggestion

  - by Campo

  I have been asked to analyze the bandwidth usage of a company and make a recommendation for upgrading their Internet connection(s). Here is the layout 3 DLS lines so it is 3x(6 Down, 1 Up Each) into a load balancer out to the office's network. 30 VOIP phones run on a T1 (1.5 Down, 1.5 Up) The users at the company are heavily uploading. It is my suspicion that the issue in slowdown is being cause by multiple people uploading and others not being able to get requests out for even simple http requests. My initial idea is to get them a fiber line with a 10 down and 10 up. What do others think on this plan? Will that be enough to host their network traffic? What do I do about the VOIP line afterward? The fiber is expensive and I know the T1 does a great job for their VOIP so I do not want to suggest a DSL line because I know it may not be sufficient. I would also like to save them some money if I can. Maybe even get a faster fiber line and forgo the T1. Though I know their load balance/switch can only handle 20MB/S throughput. Looking for some confirmation/suggestions on my plan. I am planning on going in to get some real diagnostic numbers. Any suggestions on software to use for that? Preferably Windows software.

  Read the article

• Need help using a super scope

  - by Vdub

  I have a windows server 2008 r2 standard running our DCHP, DNS, and AD. also I have (3) HP Pro Curve 2510-G switches (J9280A). Right now our LAN is set up 192.168.50.2-192.168.50.254 on our sub-net (A) and another scope with 192.168.51.2-192.168.51.254 sub-net (B) both have sub-net mask of 255.255.255.0. The same server is our DNS which is 192.168.50.242 and our firewall (watchguard) is the gateway at 192.168.50.1. Right now the sub-net (B) does not have DHCP active so only sub-net (A) is giving a pool. My problem is that we are trying to have open WiFi on our network and i am assuming that i can use the sub-net (B) for that if i activate it and use sub-net (A) for our staff only. I have noticed that when i set up a static on a client pc and set it to 192.168.51.x i cannot use the DNS of 192.168.50.242 however i can use 8.8.8.8 and it works fine, i am guessing that because it is on a different sub-net? Forgive me as i am very new at this and dont know a lot. Is there easy way with the equipment i have to a accommodate wifi for hundreds of people without causing problems for our staff? (multiple same IP address assigns) I appreciate any and all info!

  Read the article

• Coffee spilled inside computer, damaged hard drive

  - by Harpreet

  Today coffee spilled over my table, and some of it (very less) reached the PC case placed under the table. I think little bit of it got inside the PC case through the front. As that happened the fan started running very fast and made noise. I tried to restart to see if it becomes fine, but the computer didn't start again. First it gave an error of "Alert! Air temperature sensor not detected" and didn't start. Next I tried again multiple times of starting the computer but then it gave some memory error. I was not able to start the computer. Incase there's a problem in hard disk or something related to memory, is there any way we can extract our work or data? I am scared if I am not able to extract my work in case some problem occurs like that. What options would I have? Help!! EDIT: I have attached the photo here and you can see the area spilt in red circle. The hard drive electronics have been affected and internal speaker may also have been affected. Any advise on cleaning and if hard drive can work? EDIT 2: Are there any professional services offered to extract data from blemished hard disk, like this one, in case I am not able to run it personally?

  Read the article

• fail2ban regex working but no action being taken

  - by fpghost

  I have the following snippet of fail2ban configuration on Ubuntu 13.10 server: #jail.conf [apache-getphp] enabled = true port = http,https filter = apache-getphp action = iptables-multiport[name=apache-getphp, port="http,https", protocol=tcp] mail-whois[name=apache-getphp, dest=root] logpath = /srv/apache/log/access.log maxretry = 1 #filter.d/apache-getphp.conf [Definition] failregex = ^<HOST> - - (?:\[[^]]*\] )+\"(GET|POST) /(?i)(PMA|phptest|phpmyadmin|myadmin|mysql|mysqladmin|sqladmin|mypma|admin|xampp|mysqldb|mydb|db|pmadb|phpmyadmin1|phpmyadmin2|cgi-bin) ignoreregex = I know the regex is good, because if I run the test command on my access.log: fail2ban-regex /srv/apache/log/access.log /etc/fail2ban/filter.d/apache-getphp.conf I get a SUCCESS result with multiple hits, and in my log I see entries like 187.192.89.147 - - [13/Apr/2014:11:36:03 +0100] "GET /phpTest/zologize/axa.php HTTP/1.1" 301 585 "-" "-" 187.192.89.147 - - [13/Apr/2014:11:36:03 +0100] "GET /phpMyAdmin/scripts/setup.php HTTP/1.1" 301 593 "-" "-" Secondly I know email is configured correctly, as each time I service fail2ban restart I get an email for each of the filters stopping/starting. However despite all this no action seems to be taken when one of these requests comes in. No email with whois, and no entries in iptables. What possibly could be preventing fail2ban from taking action? (everything looks in order in fail2ban-client -d and I can see the chains have loaded with iptables -L)

  Read the article

• How do I secure Sql Server 2008 R2

  - by Mark Tait

  I have both a dedicated and a VPS (from Fasthosts) virtual server - the web sites/applications I run on these, access Sql Server stored on the same web server. Until now, I have logged onto Sql Server on both the deidicated and VPS server, from Sql Server Management Studio - until I noticed in my server application logs, multiple attempts to logon to Sql Server using the 'sa' username, but failed password. So someone/bot is trying hard (repeatedly every couple of hours, for approx 20 attempts during each instance) to log on... so obviously I have to lock down access to Sql Sever remotely. What I have done is gone into Configuration Manager, and in Sql Server Network Configuration - Protocols for Sql2008 and also in Sql Native Client 10.0 Configuration - Client Protocols - I have diabled Named Pipes, TCP/IP (and VIA by default). I have left Shared Memory enabled. I also disabled in Sql Server Services, the Sql Server Browser. Now the only way I can manage the databases on these servers, is by logging on to them via Remote Desktop. Can anyone confirm if this is the correct way of stopping anyone maliciously logging on to Sql Server? (I'm not a DBA or security expert - and there are hundreds of articles advising all different ways - but I was hoping for the experts here to confirm, or otherwise, if what I've done is correct) Thank you, Mark

  Read the article

• Monitor goes black for a few seconds

  - by privatehuff

  I have a Hanns G 28" monitor, Model # HG281D It has its issues (viewing angle sucks) but has been functional and solid, great for desktop stuff. Worked without any sign of any problems for 6-12 months. However, now the monitor "goes black" for about 2-3 seconds, almost like when you click "detect display" It does not turn off (power light does not go amber) The computer is completely unaffected and the video mode never changes when the picture returns. The computer is fully responsive and will keep playing music or taking my keypresses during the time I can't see anything. (it just happened and I kept typing, etc) It happens on multiple computers across several operating systems. (I have an 8-port iogear KVM switch that has several computers connected) But, it seems to happen only on certain computers. I have a hackintosh that does it, a windows 7 PC that does not, a lenovo laptop that does not, and my old ubuntu 8.10 box did not do it, but my new mint 8 box does do it. I've check the connections and tried changing out the power cable and the vga cable. Sometimes it won't happen for hours (or days) and sometimes it happens several times per hour. It was happening many months ago, did not happen for months, and has now started happening again. Does this make any sense? What could it be?

  Read the article

• "Can't create table" when having to many partitions

  - by Chris

  I am currently having a problem I dont understand. Wherever I look it says mySQL (5.5) / InnoDB doesnt have a table limit. I wanted to test the InnoDB compression and was about to create an empty copy of an existing table and ran into the following problem. this one works: CREATE TABLE `hsc` ( LOTS OF STUFF ) ENGINE=InnoDB CHARSET=utf8 PARTITION BY RANGE (pid) SUBPARTITION BY HASH (cons) SUBPARTITIONS 2 (PARTITION hsc_p0 VALUES LESS THAN (10000) , PARTITION hsc_p1 VALUES LESS THAN (20000) , PARTITION hsc_p2 VALUES LESS THAN (30000) , PARTITION hsc_p3 VALUES LESS THAN (40000) , PARTITION hsc_p4 VALUES LESS THAN (50000) , PARTITION hsc_p40 VALUES LESS THAN (4000000) ); this one doesn't: CREATE TABLE `hsc` ( LOTS OF STUFF ) ENGINE=InnoDB CHARSET=utf8 PARTITION BY RANGE (pid) SUBPARTITION BY HASH (cons) SUBPARTITIONS 2 (PARTITION hsc_p0 VALUES LESS THAN (10000) , PARTITION hsc_p1 VALUES LESS THAN (20000) , PARTITION hsc_p2 VALUES LESS THAN (30000) , PARTITION hsc_p3 VALUES LESS THAN (40000) , PARTITION hsc_p4 VALUES LESS THAN (50000) , PARTITION hsc_p5 VALUES LESS THAN (75000) , PARTITION hsc_p6 VALUES LESS THAN (100000) , PARTITION hsc_p7 VALUES LESS THAN (125000) , PARTITION hsc_p8 VALUES LESS THAN (150000) , PARTITION hsc_p9 VALUES LESS THAN (175000) , PARTITION hsc_p40 VALUES LESS THAN (4000000) ); ERROR 1005 (HY000): Can't create table 'hsc' (errno: 1) Its reproducable by removing the number of partitions and adding them again. it does not have to do anything with the name of the table as i tried various names. there is also enough empty space on the HDD. /dev/simfs 230G 26G 192G 12% /var/lib/mysql.mnt There should be no limit on the partitions http://dev.mysql.com/doc/refman/5.5/en/partitioning-limitations.html Maximum number of partitions. The maximum possible number of partitions for a given table (that does not use the NDB storage engine) is 1024. This number includes subpartitions. i have increased both open_files show variables where variable_name LIKE '%open_files%'; +-------------------+-------+ | Variable_name | Value | +-------------------+-------+ | innodb_open_files | 512 | | open_files_limit | 1536 | +-------------------+-------+ No change. Any clues where should I start looking? UPDATE: the whole thing is running in an openvz environment. i saw in users_beancounters that the numflock was a problem, so i increased it. but the problem still persists. maybe this helps: ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 515011 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 10240 cpu time (seconds, -t) unlimited max user processes (-u) 515011 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited cat /proc/user_beancounters Version: 2.5 uid resource held maxheld barrier limit failcnt 200: kmemsize 9309653 13357056 14372700 14790164 0 lockedpages 0 1008 2048 2048 0 privvmpages 675424 686528 1048576 1572864 0 shmpages 33 673 21504 21504 0 dummy 0 0 9223372036854775807 9223372036854775807 0 numproc 49 90 240 240 0 physpages 243761 246945 0 9223372036854775807 0 vmguarpages 0 0 1048576 1048576 0 oomguarpages 81672 83305 1048576 1048576 0 numtcpsock 6 8 360 360 0 numflock 175 188 512 512 8 numpty 1 9 16 16 0 numsiginfo 0 48 256 256 0 tcpsndbuf 104640 263912 1720320 2703360 0 tcprcvbuf 98304 131072 1720320 2703360 0 othersockbuf 32368 89304 1126080 2097152 0 dgramrcvbuf 0 2312 262144 262144 0 numothersock 19 28 360 360 0 dcachesize 2285052 3624426 3409920 3624960 0 numfile 616 870 9312 9312 0 dummy 0 0 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 dummy 0 0 9223372036854775807 9223372036854775807 0 numiptent 24 24 128 128 0

  Read the article

• How to determine the Kerberos realm from an LDAP directory?

  - by tstm

  I have two Kerberos realms I can authenticate against. One of them I can control, and the other one is external from my point of view. I also have an internal user database in LDAP. Let's say the realms are INTERNAL.COM and EXTERNAL.COM. In ldap I have user entries like this: 1054 uid=testuser,ou=People,dc=tml,dc=hut,dc=fi shadowFlag: 0 shadowMin: -1 loginShell: /bin/bash shadowInactive: -1 displayName: User Test objectClass: top objectClass: account objectClass: posixAccount objectClass: shadowAccount objectClass: person objectClass: organizationalPerson objectClass: inetOrgPerson uidNumber: 1059 shadowWarning: 14 uid: testuser shadowMax: 99999 gidNumber: 1024 gecos: User Test sn: Test homeDirectory: /home/testuser mail: [email protected] givenName: User shadowLastChange: 15504 shadowExpire: 15522 cn: User.Test userPassword: {SASL}[email protected] What I would like to do, somehow, is to specify per-user basis to which authentication server / realm the user is authenticated against. Configuring kerberos to handle multiple realms is easy. But how to I configure other instances, like PAM, to handle the fact that some users are from INTERNAL.COM and some from EXTERNAL.COM? There needs to be an LDAP lookup of some kind where the realm and the authentication name is fetched from, and then the actual authentication itself. Is there a standardized way to add this information to LDAP, or look it up? Are there some other workarounds for a multi-realm user base? I might be ok with a single realm solution, too, as long as I can specify the user name - realm -combination for the user separately.

  Read the article

• Autologin 2 Windows users OR Login another user from the desktop

  - by fpdragon

  I'm using two windows users on my HTPC at the same time. One is just for watching videos and one for administration via remote. This setup is quite ideal for me since windows can handle multiple concurrent logins and the win "rdp concurrent hack" (Google). The problem is, I want both users to be logged in automatically when the pc was started. It shall be possible to watch tv and also the admin user shall be automatically logged in to start my scripts and other tasks, even if I haven't logged in via remote desktop manually. Later, when I want to admin my htpc I can just rdp connect the admin user without interrupting the video playback on the actual HTPC's screen and check my cleanup tasks, downloads, ... witch already executed for this admin user. But right now I found no solution to automatically login user A from a user B desktop and I also found no solution to autologin both users immediately at startup. As a workaround I have to fire up my other notebook machine and login one time with the remote user via rdp. From this time on the remote admin user is running concurrent with the main user in the background of the machine. The other workaround would be... after startup switch user from main user to admin user and then back again. But that also requires manual steps. I'm on a Windows 8 System right now but all infos for Win7 or XP would be also interesting. thanks a lot for all ideas. PS: just to prevent useless posts... don't tell me that only one user can be logged in to windows. ;)

  Read the article

• conflicting info about the running kernel version in FreeBSD

  - by John

  I asked a related question about uname before, now want to ask from another angle because the following simple yet obvious conflicting outputs may mean there is something many people did not think of (me included). I'm running FreeBSD 9 RELEASE, please see the following commands: # sysctl kern.bootfile kern.bootfile: /boot/kernel/kernel # strings /boot/kernel/kernel |grep RELEASE|grep 9 @(#)FreeBSD 9.2-RELEASE-p7 #0: Tue Jun 3 11:05:13 UTC 2014 FreeBSD 9.2-RELEASE-p7 #0: Tue Jun 3 11:05:13 UTC 2014 9.2-RELEASE-p7 The above kernel file suggests the running kernel is 9.2-RELEASE-p7. But... # dmesg Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012 ... # uname -a FreeBSD localhost.localdomain 9.1-RELEASE FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012 [email protected]:/usr/obj/usr/src/sys/GENERIC amd64 So dmesg and uname says it's 9.1-RELEASE. I also did an extensive find / -type f -exec grep -l "9.1-RELEASE" {} \; but found no possible kernel file that contains 9.1-RELEASE. What could lead to the above conflict, and what kernel I am actually running? Please note I run RELEASE and ran freebsd-update to do binary update, so no compiled kernel is involved. And I have rebooted multiple times after freebsd-update. And the system is not in jail etc, just the only system on that computer.

  Read the article

• For enabling SSL for a single domain on a server with muliple vhosts, will this configuration work?

  - by user1322092

  I just purchased an SSL certificate to secure/enable only ONE domain on a server with multiple vhosts. I plan on configuring as shown below (non SNI). In addition, I still want to access phpMyAdmin, securely, via my server's IP address. Will the below configuration work? I have only one shot to get this working in production. Are there any redundant settings? ---apache ssl.conf file--- Listen 443 SSLCertificateFile /home/web/certs/domain1.public.crt SSLCertificateKeyFile /home/web/certs/domain1.private.key SSLCertificateChainFile /home/web/certs/domain1.intermediate.crt ---apache httpd.conf file---- ... DocumentRoot "/var/www/html" #currently exists ... NameVirtualHost *:443 #new - is this really needed if "Listen 443" is in ssl.conf??? ... #below vhost currently exists, the domain I wish t enable SSL) <VirtualHost *:80> ServerAdmin [email protected] ServerName domain1.com ServerAlias 173.XXX.XXX.XXX DocumentRoot /home/web/public_html/domain1.com/public </VirtualHost> #below vhost currently exists. <VirtualHost *:80> ServerName domain2.com ServerAlias www.domain2.com DocumentRoot /home/web/public_html/domain2.com/public </VirtualHost> #new -I plan on adding this vhost block to enable ssl for domain1.com! <VirtualHost *:443> ServerAdmin [email protected] ServerName www.domain1.com ServerAlias 173.203.127.20 SSLEngine on SSLProtocol all SSLCertificateFile /home/web/certs/domain1.public.crt SSLCertificateKeyFile /home/web/certs/domain1.private.key SSLCACertificateFile /home/web/certs/domain1.intermediate.crt DocumentRoot /home/web/public_html/domain1.com/public </VirtualHost> As previously mentioned, I want to be able to access phpmyadmin via "https://173.XXX.XXX.XXX/hiddenfolder/phpmyadmin" which is stored under "var/www/html/hiddenfolder"

  Read the article

• LogMeIn style remote access to NAS drive

  - by Mere Development

  I've been asked to setup some remote access to a NAS drive. The NAS drive will sit on a VLAN inside a network that uses a Cisco 891 IS router as gateway. The charity have no SSL-VPN licenses for the Cisco. At present there are no open ports or services on the Cisco itself and ideally we would like to keep it that way for a while, hence the request for a LogMeIn style service that's initiated from inside. We need multiple user access, about 10 max. Using LogMeIn on a machine connected to the NAS would only provide screen sharing I believe, and no concurrent connections (could be wrong?) The end users need to be able to read and write files to the NAS from Mac's and PC's around the globe. Read-only access from Mobile devices would be a bonus but not absolutely necessary. This is for a charity, non-commercial, but they are willing to spend if necessary. Cisco config knowledge is at a minimum so if I can avoid upsetting that delicate device I'll be happy :) Anyone have any clever ideas? I can provide more information on request. Thanks, Ben

  Read the article

< Previous Page | 763 764 765 766 767 768 769 770 771 772 773 774  | Next Page >