Search Results

Search found 27047 results on 1082 pages for 'multiple projects'.

Page 769/1082 | < Previous Page | 765 766 767 768 769 770 771 772 773 774 775 776  | Next Page >

• Ubuntu 12.10 and nVidia drivers don't like each other?

  - by mingos

  I decided to upgrade both my computers from Precise to Quantal. What a mistake that was. My laptop has a nVidia GT 330M card, while the desktop has an nVidia 9600 GT. In both cases everything goes great as long as I use the Nouveau driver (ugh!). Can't really play games (Amnesia... and hoping for Steam Beta participation...), even though it's OK for work. Now, ever since 9.04 or so, I just installed nvidia-current and all just worked. Since 12.10, after installing nVidia drivers, Unity won't start at all (hangs with only the wallpaper displayed, no cursor or widgets), Gnome Shell is permanently in fallback mode. Now, I have tried on both computers, with multiple clean installs on Ubuntu (two separate downloads, just in case), one from Ubuntu Gnome Remix. And additionally, Fedora 17, which seems to suffer from the same issue. Tried all nVidia driver suggestions available in Software Sources, and even compiled the drivers myself. I tried several versions of the driver to exclude an issue with the newest one. In my frustration, I have switched to Windows (which, ironically, "just works" with my hardware), but still hold a twin OS configuration on the desktop and would like to use Ubuntu again. So, can anyone point me to where the issue might lie?

  Read the article

• Equalizing Agent and Master Nagios on state change alone

  - by punith

  We have a setup where there are distributed Nagios running on multiple sites and are equalizing their data to the main Nagios server. The problem is it sends back the data to main Nagios server no matter if there is a state change in host or service. Is it possible to configure the slave Nagios to check the service/Host every 5 sec but send back the data only if there is a state change. Currently it is implemented by Obsess Over Hosts/Service which always runs the command which will equalize. Nagios version is 3 I am no administrator but a developer so I don't know the exact jargon so please bare with me.

  Read the article

• What's an alternative to using public folders (in Outlook)?

  - by Ivo Flipse

  My colleagues abuse our mail servers public folders to store (old) emails so that everyone can read them using IMAP. I'm looking into good alternatives after reading this Tech Republic article: "10 reasons why you should begin phasing out Exchange public folders" The most important thing they need is access to emails from multiple computers without overloading our network. So do you have any suggestions for alternatives? If there's a nice combination with some CRM system it would be interesting too. Note: this doesn't have to be freeware, usability and efficiency are more important. The solution has to be Windows 32 bit only

  Read the article

• website lookup extremely slow in ubuntu

  - by ubuntulover

  Hi I have a wireless broadband connection through a router and wireless modem. Everything works fine in Windows. However, in ubuntu on the same machine, websites seem to take longer to start loading. I think the dns lookup is slow. I think https sites may be slower, as Ijust can't log in to gmail. I am also using a mercurial repo with remote origin, and it takes forever (like 5 minutes) to push one small change. I think it is because it has to communicate through https multiple times. Should I change my dns server? I've seen that I don't have these problems at my work network (they have another dns server). This happens with the IPv4 settings being automatic (dhcp). When I change it to automatic (dhcp) addresses only, and add google's 8.8.8.8 in the dns servers, it still takes forever. Why is this happening?

  Read the article

• Best server for mailing application [closed]

  - by Cyber Junkie

  My application is similar to a reminder service that reminds users of events that they scheduled. I'm sending emails to users through a PHP script. I'm not sending one email to multiple recipients. Each recipient receives a different message. I plan to use cron jobs every minute and expect the application to send roughly 200 individual emails in 1 hour (for a small user base that may grow). I don't have hosting experience with this type of application. I plan to start on a shared host and move up in the future to vps or dedicated. Most shared hosts that I looked into allow 50-100 emails per hour with delays between mailings. Please kindly inform me what I should look for in web hosts for this kind of application.

  Read the article

• Domain in a hosted environment

  - by cpgascho

  We have an application we host in a third party data center for our clients. We have multiple clients running the same application on several racks of servers. Most of our clients require that our servers be SAS70 compliant. Currently each server has it's own set of users and security settings that need to be configured. We are creating scripts to do this, but what would be the risks/advantages of joining all the servers to the domain for User Management and Group policy for enforcing security settings? The rational of some is that if the DC is hacked the whole network would be compromised where as if one stand alone hosted server is hacked everything else should be safe.

  Read the article

• Requiring a specific order of compilaiton

  - by Aber Kled

  When designing a compiled programming language, is it a bad idea to require a specific order of compilation of separate units, according to their dependencies? To illustrate what I mean, consider C. C is the opposite of what I'm suggesting. There are multiple .c files, that can all depend on each other, but all of these separate units can be compiled on their own, in no particular order - only to be linked together into a final executable later. This is mostly due to header files. They enable separate units to share information with each other, and thus the units are able to be compiled independently. If a language were to dispose of header files, and only keep source and object files, then the only option would be to actually include the unit's meta-information in the unit's object file. However, this would mean that if the unit A depends on the unit B, then the unit B would need to be compiled before unit A, so unit A could "import" the unit B's object file, thus obtaining the information required for its compilation. Am I missing something here? Is this really the only way to go about removing header files in compiled languages?

  Read the article

• Development Approach: User Interface In or Domain Model Out?

  - by Berin Loritsch

  While I've never delivered anything using Smalltalk, my brief time playing with it has definitely left its mark. The only way to describe the experience is MVC the way it was meant to be. Essentially, all the heavy lifting for your application is done in the business objects (or domain model if you are so inclined). The standard controls are bound to the business objects in some way. For example, a text box is mapped to an object's field (the field itself is an object so it's easy to do). A button would mapped to a method. This is all done with a very simple and natural API. We don't have to think about binding objects, etc. It just works. Yet, in many newer languages and APIs you are forced to think from the outside in. First with C++ and MFC, and now with C# and WPF, Microsoft has gotten it's developer world hooked on GUI builders where you build your application by implementing event handlers. Java Swing development isn't so different, only you are writing the code to instantiate the controls on the form yourself. For some projects, there may never even be a domain model--just event handlers. I've been in and around this model for most of my carreer. Each way forces you to think differently. With the Smalltalk approach, your domain is smart while your GUI is dumb. With the default VisualStudio approach, your GUI is smart while your domain model (if it exists) is rather anemic. Many developers that I work with see value in the Smalltalk approach, and try to shoehorn that approach into the VisualStudio environment. WPF has some dynamic binding features that makes it possible; but there are limitations. Inevitably some code that belongs in the domain model ends up in the GUI classes. So, which way do you design/develop your code? Why? GUI first. User interaction is paramount. Domain first. I need to make sure the system is correct before we put a UI on it. There's pros and cons for either approach. Domain model fits in there with crystal cathedrals and pie in the sky. GUI fits in there with quick and dirty (sometimes really dirty). And for an added bonus: How do you make sure the code is maintainable?

  Read the article

• Cannot find GRUB - Ubuntu/Windows 8 dual-boot

  - by ubeatlenine

  Hello Ubuntu community, I find myself in an interesting situation. I have a Dell Inspiron 531 with Windows Vista. Recently my brother decided it would be a good idea to overwrite Vista with the Windows 8 consumer preview. Since we have had this PC for a very long time, we have long since lost the Vista CD, and according to the Windows 8 preview website you cannot recover your previous OS without it. I thought this would be a good opportunity to try out Ubuntu (since we obviously cannot keep the preview as an OS), but it appears that Ubuntu 11.10 Desktop is not compatible with Win8. Ubuntu doesn't run from the LiveUSB I made, instead it freezes on the loading screen and then disintegrates into black and white stripes. I blamed this failure on Ubuntu not being compatible with win8 yet and tried to install Ubuntu from the USB on a partition made from the remaining space on my hard drive - about 100GB. However the installer crashed while loading modules and told me I didn't have enough disk space. Since then, I have not been able to load either Ubuntu or Windows, BIOS is shifted over to the left of my screen, and I always get the same message: error: unknown filesystem grub rescue> typing "ls" at the prompt gives me the following: (hd0) (hd0,msdos7) (hd0,msdos6) (hd0,msdos5) (hd0,msdos2) (hd0,msdos1) does this mean I have multiple partitions running windows on my computer? Is it possible to recover Vista without the disk? Are all of my problems stemming from Ubuntu not being compatible with Win8 preview? (I realize the majority of my questions are about Windows, but seeing as the prompt I get is for grub I thought I would ask here first.) Any insight anyone has on this predicament would be greatly appreciated.

  Read the article

• PHP or C++? I just want to choose a language and focus on it!

  - by user19177

  I love C++, but I feel I don't know if I should focus on web, so PHP, or C++. It's just an hard choice because right now I want to focus on one language and don't want to switch it a few months later. With C++ I'd program in SDL, while with PHP I don't know yet. I am not a very advanced programmer but I know basics of programming and can get going very well if determined. The problem is I just don't know.. I'm like OK! I'll go for C++! Then a minute later, wait what if I went with C#? Why this that.. ! I've read milion threads about C vs VB C# Python Ruby etc, all of them which I could find! It got me nowhere. The problem is probably I need to know something from some experts I guess.. I'm sure I'm not the only one who feels/felt like I do right now yeah? Uhm... I guess I might help you with some details so your answer may be easier to write! ( And also, if you want to say something else which is not related to PHP or C++, you can do that, I've just got to the conclusion that C++ and PHP are the ones that are worth it but yeah. C# I've discarded due to some stuff I read which says in future the projects I'd start now could just be useless and stuff like that.. ) Ok well : I'm 18 years old, and I program as hobby right now, but I do hope to go to a programming college in future. ( That would be in 2 years ). Hmm, I like programming games, and I'm mostly bothered by the fact "this language could be useless to what I need to do" ( I don't know how to explain this feeling! ) I don't know which other details I could add... I hope you guys can help me choose my path, this is really stressing me I'm wasting my time not doing anything right now because I don't know which language to use..! Thanks!

  Read the article

• How do you host images using Windows Server so that they are accessible over the internet? [closed]

  - by nairware

  I was trying to figure out a way to host images (picture images, not disk images) such that they are accessible over the internet via URLs--in a way similar to a web service like Photobucket or ImageShack. I have a whole bunch of Windows Servers (Windows Server 2008 R2) available in the cloud. Instead of hosting images using Photobucket or ImageShack, I wanted to host this images directly on my own Windows cloud. This could be really complicated or really simple. I have no idea, as I know very little about IIS 6 (which is what I am using) or web servers. If this is too broad of a question (as there are probably multiple ways of implementing this), is there at least some guide or documentation of how someone else has setup image hosting? Perhaps a step-by-step guide of at least one way to do it?

  Read the article

• Recommended laptops for system admins?

  - by 80skeys

  Hey all - I'm in the market for a new laptop and wanted to get some recommendations. I'm a Linux sysadmin and this laptop is primarily for work related use, working from home, after hours, occasional trips to the data center, etc. We all know the drill. My typical setup includes various utilities and tools plus multiple partitions for booting different OS's including VMware. Need serial port of course, DVD-RW, and all the usual stuff we use in our daily routine. I'm kinda thinking a Thinkpad T510 but open to other suggestions! Brief explanation of why you suggest some particular brand and configuration is appreciated.

  Read the article

• Windows XP - Website unaccessible on single pc in LAN

  - by DorentuZ

  For serveral days now, a website isn't accessible on a single pc in the LAN. On the other pc's, it works just fine. And it's just a single website that's not accessible as far as I know of. The website generates a timeout on every single web browser I've tried (IE8, Firefox and Chrome). However, traceroute, nmap and telnet all work just fine. I've even tried multiple user accounts and safe mode, but that didn't work either. As a side note: using a linux live cd did work and I could access the website without any problems. The hosts file is the windows default, the ip- and dns settings on the network adapter normal as well. No strange processes are running and no viruses found. According to tcpview and netstat there are connections to the domain, but every request in the browser results in a timeout.. Any idea what's happening?

  Read the article

• Mac Terminal - Color Co-ordinated

  - by Biscuit128

  I would like to create a couple of short cuts on my iMac which ssh on to my dev box and on to my prod box. I would like my dev connection to use the settings something similar to home-brew (green text black background) and my prod connection to use red text black background) - How can this be configured so that this is possible. Would I need multiple bashrc files one for prod and one for dev and source individually? If this is the case, how can i get the profiles to be sources as soon as i double click the shortcuts? Thanks

  Read the article

• Unix / linux permissions setup for shared hosting with Apache

  - by weiyin

  I'm in the process of setting up a server from a clean CentOS 5 install. What is the best permission structure (users, groups, unix permissions) for running a single instance of apache for multiple users? Ideally, it should satisfy these requirements: Each user's websites are stored in a subdirectory of their home directory. Users can edit files and permissions. Apache can read the websites of all users. No user can read the website files of other users. Bonus question: how to add PHP and/or Perl and/or Ruby to Apache without allowing any users to access any other user's files?

  Read the article

• ISCSI sessions appear from nowhere

  - by Maraca

  Hi, I am using Win2008 32bit Ent. running in Hyper-V with 2 LUNs over ISCSI connection (this is a MS cluster with one LUN being quorum and second as a storage). In ISCSI - target - details I see multiple sessions from same target (currently 7), however I am not sure where they are coming from as I have only one virtual NIC on this server. Sure enough 2 LUNs appear 7 times each in device manager or in disk manager. On the cluster partner however, I do not see that problem. There is only one session per target. Installing MPIO makes only difference - I am getting 8 sessions instead of 7 once I reboot. Does any one know what can cause this behavior?

  Read the article

• Is there a multi-user Remote Desktop app for Mac OS X?

  - by Peter Walke

  Is there a remote desktop app for the Mac that allows multiple people to be remoted in at the same time, similar to RDP in Windows? I've used VNC, but that only allows one person to control the computer. For some background: I'd like to set up a mac that many users can RDP into from PC's to do XCode development. I did some searching and didn't find anything, so I'm assuming it's just not possible, but I want to confirm. Thanks. Update: Thanks to a link in one of the answers, I found a reasonable solution: AquaConnect

  Read the article

• How do I make two different Google Chrome profiles?

  - by ldigas

  I have a laptop which I use for (the major part) of my work and private life, and would like to set those two apart starting with Google Chrome. So far, my Google Chrome contains my work bookmarks, logins/passwords and everything else ... which I use for work, which I use privately, which I use in my spare time (funny Youtube videos, what else :) Is it possible to define multiple Google Chrome profiles, let's say work and free-time, so one can quickly switch between them, where bookmarks, logins and so on, from one would be invisible in the other, and vice versa? Also, is it possible to put them into some directory different from the default, so one can easily backup them, when needed? If it is, could anyone describe it in simple terms, or his experiences if she/he has a better way of going about this?

  Read the article

• Text after Control Sequence

  - by SPAM SPAM SPAM SPAM

  I am trying to parse the output of a command that expects to be writing to the screen. It has data separated by move-to-origin control sequences (for the VT220, ESC[1;1H). I only need the last part (i.e. after the last move-to-origin). I have tried doing this multiple ways (primarily awk and sed), but the problem is always that parts of the control sequence have special meaning (to the program, not just to the shell), and I cannot quote them when I substitute tput's output. Any suggestions?

  Read the article

• TrueCrypt Corrupted Files

  - by B. Knight

  Several months ago, I needed to reorganize my data across multiple external hard drives with my laptops primary hard drive as the go-between. My external hard drives are all encrypted with TrueCrypt. It appears to me that somehow during the transfer of my files between the encrypted external drive an the unencrypted internal drive, the files were transferred "as-is" (in their encrypted state). The files range from very small to very large. It appears that this may have happened during one consecutive transfer session. Has anyone ever experienced this problem, and if so were you able to fix it? Is there a way to recreate the encrypted partition, transfer the files, and then decrypt them to their usable state? Or can the files somehow be decrypted through other means? UPDATE: I am running Windows 7 (x64) HP now, but may have been runninG ENT. then. Toshiba Laptop 650GB HDD / 4GB Mem. Latest version of TC

  Read the article

• 56.6 Modem with CallerID

  - by Fuod

  Does anyone still know anything about the 56.6 modems? I'm looking for one that is easy to access via C#/VB.Net, has Caller ID and is either low-profile or USB. Also that neat little feature that lets the modem block the call from the phone (pass-through) until it has received the CallerID info would be really nice! Obviously I could just go to Best Buy and get what they have but I have no way of knowing how friendly it would be to write code for and I don't want to make multiple trips returning/exchanging etc. I'm not going to be doing anything with voice or voice mail, just recording the number from CallerID. Thanks!

  Read the article

• /etc/hosts file for a multi-homed, multi-domain machine?

  - by threecheeseopera

  I have a server (debian) with two network interfaces that I would like to host multiple services and domains on; it is not entirely clear to me how the hosts file should be set up. Example: eth0, bound to WAN interface 1.2.3.4: mail.example.com www.example.com eth0:1, bound to WAN interface 1.2.3.5: www.other-domain.com eth1, bound to LAN 192.168.1.123: some-clever-hostname What should my hosts file look like? (including localhost,localhost.localdomain, etc.) Should I use DNS for some of these entries? Which ones? Thanks!

  Read the article

• Hyper-V with a single host NIC

  - by Cylindric

  I'm trying to create a simple Hyper-V test machine, and am having more problems than expected with the basic networking. All other hypervisors I've used (vmware server, vmware player, virtualbox) allow me to use the default single NIC in my machine, and then create guests with "bridged" mode so they appear like a normal machine on the network. With the Hyper-V server, when I create a Virtual Switch and set it to "external", I lose all network access from the host. The solutions I've seen online seem to rely on complex configurations requiring multiple vSwitches and RRAS on the host to get it going. Is it really that complex to get a simple, single-NIC Hyper-V server going, in such a way that I can still use the host? The host is Windows 8.

  Read the article

• Simplest way to respawn configured number of instances of a specific process.

  - by Zwei Steinen

  So we have an app. which we wan to run multiple instance of it in linux. The number should be configurable. We also want that whenever one of the instance disappears, a new one is booted up. I was looking into C based programs, shell script, python script etc. but I was wondering what would be the most simple, easiest way to do it. Are there any tools out there? Can one simply use some linux built-in functionality? Linux distribution is Red Hat.

  Read the article

• How can I access a shared Exchange mailbox with IMAP (over telnet)?

  - by gauteh

  I have an Mailbox which multiple users have access to, it works fine for me and I can add it in Outlook as an additional mailbox to my account and list all its content. I can access my personal mailbox using IMAP, I'm testing it by just telneting in and LIST'ing it. The problem is that another user trying to access it is having problems accessing it through IMAP; and I want to test if I can access the shared mailbox with my account - how can I do that in terms of IMAP commands? What I am doing now is: telnet mail.server 01 LOGIN user pass 02 LIST "" * 03 LOGOUT Edit: If there is another way to test this, that is an equally good answer.

  Read the article

< Previous Page | 765 766 767 768 769 770 771 772 773 774 775 776  | Next Page >